1 Technical notes on version 1.39
5 kes Make sure that the storage for a job is pulled first from
6 the Pool and if not from the Job.
7 kes Ensure that either the Pool or the Job specifies a Storage
10 kes Start applying new FSFE copyright.
12 kes Add additional error messages in acquiring a drive for read.
13 kes Make WritePartAfterJob the default so that the last DVD part
14 always gets written to the DVD by default.
15 kes Add additional error messages in migration.
16 kes Suppress redundant error messages in migration (possibly more to do).
17 kes Apply Martin's fix (updated to 1.39) that takes into account
18 run storage overrides in the Director status display.
19 kes Implement, but turn off the submitted code that sets the EOT
20 model on FreeBSD machines. Turning on this code is too risky at
21 this point in the development.
23 kes Implement unique dbid routine for migration to prevent the same
24 JobId from being migrated twice. This should fix bug #709.
26 kes Apply Jaime Ventura's 'mail on success' patch.
27 kes Add a SMALLOC_SANITY_CHECK for Arno, which aborts Bacula
28 if memory usage gets too big.
29 kes Tweak migration to ensure that read/write devices are different.
31 kes Create an AUTHORS file to list Bacula contributors.
32 kes Add Richard Stallman's four GPL freedoms to LICENSE
33 kes Require the conf file to have a valid NextPool for writing the
36 ebl Enable RecycleCount in catalog.
37 ebl Fix "echo python | bconsole" segfault
39 kes Implement code to pass the MediaId to the SD. The SD then uses
40 this MediaId when creating JobMedia records. This fixes a bug
41 with Migration where the MediaId got set to the second Volume
42 read rather than the write Volume. Possibly (unlikely) fixes
44 kes Remove NextPool from Job resource.
45 kes Edit a few numbers in the restore dialog with commas.
46 kes Note, the DIR<->SD protocol has changed.
48 kes Replace () by {} in configure.in for proper HP configuration.
49 kes Shorten some lines over 80 characters in filed/backup.c
50 kes Cast sizeof() in filed/backup.c to avoid compiler warning.
52 Version 1.39.28 released:
54 kes Change error message 'illegal' to 'invalid' -- bug #707
55 kes Add rather primitive device resource deadlock detection in
56 the job queue handler. It detects the same read and write device
57 for migration and cancels the job.
58 kes Start adding a unique_dbid_hander() routine in migration to avoid
59 duplicate mediaids and duplicate jobids.
60 kes Add patch from bug #708 to permit relative paths such as ../xxx
61 in the restore tree routine.
62 kes Add Eric Bollengier's patch to reduce locking time in the SD after
63 despooling, and thus many jobs finish faster.
64 kes Correct locking order of reservations lock and device mutex in
65 reserve.c -- this should correct Arno's deadlock that occurred
66 when doing mount/unmount at the same time a job is reserving a
69 rbn Fixed problems with encryption when combined with compression
70 or sparse files. Unfortunately this means that all previous
71 encrypted backups can't be restored.
72 rbn Fixed problem in bfgets with Windows and Mac end of lines.
73 rbn Fixed bug in Windows version of close_bpipe() that cause programs
74 like bsmtp() to hang waiting for the pipe to be closed. Fixed
75 binary file type problems in open_bpipe().
76 rbn Fixed a number of bugs in the mysql DB scripts.
78 ebl Fix broken runscript on director. (RunBefore, RunAfter)
79 ebl Use M_ERROR instead of M_FATAL in runscript.c
81 ebl Small fix src/dird/job.c to add JobErrors count to catalog.
82 rbn Ignore UTF-8 marker at the start of .conf files.
83 rbn Add stab2cv to 3rd party dependencies. This is a utility I
84 wrote that is licensed under the GPL and available on SourceForge.
85 It converts the stab debugging info generated by gcc into Codeview
86 format. Currently it just translates function names to global
87 symbols. This is sufficient to get reasonable stack traces from
88 Dr Watson and to look at minidumps.
89 rbn Fix bug # 699 - winbacula client crashes whilerunning bat scripts.
90 rbn Enable Windows XP look and feel for the tray icons and wx-console.
91 rbn Add Windows specific FileSet example to bacula-dir.conf.
92 rbn Reorganize Start menu so that documentation and configuration are
95 rbn Change daemons and utilities so that if -c is omitted from the
96 command line AND there is no configuration file in the current
97 directory then the 'standard' configuration file (eg
98 /etc/bacula/bacula-*.conf) will be used. If the argument to -c
99 doesn't contain any path separators AND there is no configuration
100 file by that name in the current directory then the 'standard'
101 configuration file directory will be searched for a file by that
103 rbn Fixed restore on Windows so that backslashes as path separators works.
104 rbn Add missing query.sql file to Windows installer.
105 rbn Fixed Windows versions of catalog backup scripts.
107 kes Fix optional files in Makefile.in of src/filed that caused
108 a syntax error when using no optional files.
110 lf Fix a cosmetic bug in filed.c that caused spurious OpenSSL error
111 messages; there is no reason to attempt to load a private key.
112 from master key files.
114 Version 1.39.26 released:
116 kes Apply the three patches from Richard Mortimer.
117 bacula-reposition.patch, bacula-tape-reopen.patch, and
118 bacula-eod.patch. This corrects tape positioning on older devices,
119 and also a problem with btape.
120 kes Apply fix from bug report #696 where writing to a FIFO does not
121 work due to a dumb typo.
122 kes Unlock the tape door before the file descriptor is released. This
123 should fix lots of somewhat subtle failures when using an autochanger.
125 kes Correct mtx-changer bug that I introduced in a recent commit, and
126 pointed out by Robert Nelson -- thanks.
127 rbn Fix Windows' daemons so that messages print to stdout if not
128 running as a service.
129 rbn Add daemon name to trace file name (eg bacula-dir.trace).
130 rbn Fix environment variable expansion in directory names on Windows.
131 rbn Fix autochanger support in fill command.
132 rbn Update SQL scripts to match Unix versions.
133 rbn Fix daemon usage displays.
134 rbn Cleanup bacula-dir.conf template.
135 rbn Install openssl.cnf so that the openssl.exe installed in the
136 Bacula\bin directory can be used to generate keys and
137 certificates for TLS and encryption.
138 rbn Fix cleanup of spool files on Windows.
139 rbn Remove /silent option from daemons on Windows. The new default
140 is the same as the old /silent. To enable the message boxes that
141 previously were suppressed by /silent you must add /debug instead.
142 NOTE: As a result of this change, the first time you upgrade from
143 a previous version of 1.39.x you will receive the message
144 boxes when the remove of the old services succeeds. This
145 is the same behaviour as when migrating from a version prior
147 However, going forward, these message boxes will not appear on
148 upgrades or new installs.
149 rbn Add new /debug option. This option enables the message boxes that
150 previously were suppressed by the /silent option. In addition the
151 daemons running as services will open a console window if this
153 rbn Fix bug with service not being removed on migrated installs. This
154 should correct those cases where the file daemon install was failing
155 when upgrading from versions prior to 1.39.x.
157 kes Turn on heap reporting in Dir with zero debug level.
158 kes Send a message to the sys log when Bacula forces a SEG FAULT, and
159 send the same message to stdout.
161 kes Begin work on new GUI 'console'.
162 kes Make configure look in non-standard MySQL library directory
164 kes Make mtx-changer automatically configure the autochanger wait
165 procedure for Solaris, FreeBSD, and Linux. Previously, only Linux
167 kes Correct drop_sqlite_tables.in script to not delete the database.
168 kes When writing to a log file, close and reopen the file descriptor
169 if there is an error writing the file.
170 kes Modify the autochanger loaded?, load, and unload commands to print
171 the full text of any mtx output if there is an error. Helps to
172 ease diagnosis of autochanger problems.
173 kes Correct a few Win32 errno returns in the VSS code so that hopefully
174 a resonable Win32 error message will be printed.
175 kes Convert a few strcat()... to bstrncat() in the Win32 code.
177 rbn Added Windows version of bsmtp.
178 rbn Fixed path search for Windows so that Bacula\bin is automatically
179 searched for programs and scripts.
180 rbn Fixed bugs in mtx-changer.cmd and made template bacula-sd.conf
183 Version 1.39.24 released:
185 kes Apply dvd find volume patch from Richard Mortimer.
186 kes Eliminate the dvd specific mount routines using only the
188 kes Make update_free_space a method of DEVICE and rename
191 kes Require a messages command acl to be able to receive messages
193 kes Add console, system, and scan job types in util.c.
195 kes Print the Volume purged message only for real jobs to keep
196 from cluttering up the daemon messages.
197 kes Lock the tape drive door while Bacula is using the device.
198 kes Add back the 'No Jobs running' message to FD and SD status because
199 my regression script depends on it, and I'm too lazy to change the
201 kes Start using structure assignments (not too happy about it ...).
202 kes Fix a bug in the tools Makefile that broke on Solaris.
203 kes Unload any autochanger drive during a 'release' command.
205 kes Enhance error message when restoring without bootstrap file.
206 kes Check restored size only for regular files.
207 kes Store Python job level in job record in Dir.
208 kes Add back code to open tape device nonblocking, but if rewind fails
209 release file descriptor.
210 kes Modify acquire.c to first try autoloading the device. Also, ask operator
211 to mount tape if drive cannot be opened.
212 rbn Made Windows service tray status windows resizable.
213 rbn Fixed horizontal scrolling of text in status window.
214 rbn Preserve horizontal and vertical scroll position while
215 updating. This prevents the display being reset to the
216 top line every 5 seconds.
217 rbn Fix Windows cross-compile compatibilty problems with
218 *nix variants such as OS X without the zic command.
219 rbn Eliminate dependency on man2html.
221 kes Update src/win32/dll/bacula.def for change in BPIPE definition for
223 kes Fix a compiler warning in compat.cpp
224 kes Change strcpy to bstrncpy in compat.cpp
225 kes Remove some broken code in bdb_list.c
226 kes Fix, hopefully the last, ACL problem in the restore command.
227 kes Update the README.mingw32
228 kes Add new version of upgrade-win32-client.txt to examples directory.
229 Submitted by Michel Meyers.
230 kes Print an INFO message in the job report when a Volume is marked Purged.
231 rbn Fixed handling of external program and script execution
232 so that the format of the command line is more flexible.
233 Now executable path names containing spaces are translated
234 to the equivalent short name automatically. The result is
235 passed to cmd.exe with the quotes removed.
237 kes Apply the recycle patch from Richard Mortimer.
238 kes Convert a few if statements in dev.c to switch statements.
239 kes Start using print_errmsg instead of bstrerror().
240 kes Print a job message in SD when a job is marked to be canceled.
242 kes All code added back. Fixed block.c read/write to loop only 3
243 times. This apparently keeps the OS from crashing (at least
245 kes The kernel bug still persists. Backup something then immediately
246 do a bscan on the same tape, and the kernel will crash.
247 kes Simplifed tape open(). It no longer uses nonblocking mode, which
248 means that opening with no tape loaded will probably take at least
249 6 minutes before an error is reported.
250 kes Do not use MTSETDRVBUFFER if not running as root. Do a MTRESET
251 when doing set_os_device_parameters.
252 kes Report open error in mount.c
253 kes Remove all .exe files from the installer directory on make clean.
255 kes Start adding back removed code.
256 kes Back out a number of changes because backups to tape crash my
258 kes Remove the inetd code from the File daemon.
260 kes Add -c option to pg_dump so that it initializes tables when
262 kes Fix FirstWritten time on Volume to be obtained from SD so that
263 it is the actual time the volume was first written.
264 kes Minor Makefile changes.
265 kes Handle EBUSY during read(). Improve how EBUSY is handled in write().
266 ebl Add yes keyword to prune/purge command
268 kes Correct a test in block.c that prevented restore of a DVD from
269 looking at the last part in the spool directory.
270 kes Make some error messages clearer mostly by using the word DVD
271 in the message. Improve infor message in read_record for DVDs.
272 kes Remove DVD kludges in dircmd.c label/relabel.
273 kes Move the dvd relabel code from dircmd.c into
274 write_new_volume_label_to_dvd() adding a relabel argument.
275 kes Rewrite the truncate_dvd() code to be much simpler and
276 more logical. First blow away any spool part, then create a
277 new empty part and write to the DVD.
278 kes Rewrite the can_write_on_non_blank_dvd() code making it
279 only ensure that no valid data is on the DVD -- i.e. it
282 kes Minor Makefile fixes.
283 kes Put attach_dcr_to_dev in a subroutine.
284 kes Make attaching/detaching to/from a device use a flag and
285 only detach if actually attached.
286 kes Add dvd-simulator.in to scripts directory and add to configure.
287 kes Fix code in acquire.c that checks fd != 0 to use dev->is_open().
288 This could be a cause of a number of drive reservation problems.
289 Note, this code is now in attach_dcr_to_dev().
290 kes Suppress doing Volume updates if it is a system job. This should
291 prevent the DVD label blocking.
292 kes Clear the freespace ok flag in a couple of strategic places.
294 kes Put removing zero sized spool part file in subroutine and
295 call from release_device().
296 kes Add Richard's patch for relabel to dircmd.c, but save and restore
298 kes Rework a lot of subroutines in dev.c to take dcr as an
299 argument. This is done to eliminate the usage of attached_dcrs
301 kes Change truncated_dvd to blank_dvd, which seems more suitable.
302 kes Apply most of Richard Mortimer's truncate patch.
303 kes Create lseek() method for DEVICE that takes dcr as an
304 argument. This is to eliminate the use of attached_dcrs in
305 lseek(). The calls to lseek_dev() must still be changed.
307 kes Apply Richard Mortimer's patches for printing an error
308 message in btape when a DVD is used, and to initialize traceback.
309 kes Added error message to btape when trying to access a file.
310 kes Move prototype of update_slots() to protos.h.
312 kes Add JobErrors, JobFiles, SDJobFiles, SDJobErrors, SDJobStatus,
313 and FDJobStatus to the Director Python variables.
314 kes Make sure valid argument passed to str_to_utime() where Arno
316 kes Apply Richard Mortimer's patch for bcopy, bextract, and bscan.
317 I.e. part of two different patches.
319 kes Modify disk changer to simulate some of the error conditions
321 kes Make sure the close() call in the SD tools is just before the
323 kes Implement dir_get_volume_info() in bls using the patch from
324 Richard Mortimer but call find_num_dvd_parts().
325 kes Implement find_num_dvd_parts() that mounts and scans a DVD
326 and counts the parts.
327 kes Move the omode code in open_dvd() up so that the cannot
328 write on blank disk can check can be bypassed for read mode.
331 kes Disable normal data spooling for DVD writing which uses
332 a different spooling mechanism.
333 kes Apply patch from Richard Mortimer to ensure that the number
334 of DVD parts is correctly updated.
335 rbn Save installer details log in the Bacula directory as
337 rbn Add installer generation of client and storage templates
338 suitable for @inclusion on the director.
339 rbn Mark previously installed Win32 components read-only since
340 deselection doesn't do anything.
342 Version 1.39.22 beta released:
344 kes Fix logic error in handling error return from mtx-changer
346 kes Make status from SD aware of -1 (unknown) Slot status.
347 kes At Eric's suggestion make both the 'slots' and 'drive' commands
348 to the Storage daemon work even if the drive is busy.
349 kes Make two separate Win32 menu links for starting bconsole and
350 wx-console in winbacula.nsi
351 kes Apply DVD part_spooled patch from Richard Mortimer
352 richm@oldelvet.org.uk
353 kes Put installer/Readme.txt into Win32 EOL format for Notebook.
354 rbn Fixed problems migrating settings from previous releases in
355 Win32 installer. Add Readme.txt with an option to show it on
356 the installer Finish page.
358 kes Use get_catalog_resource() to open catalog database
359 to ensure that ACLs are respected and that user is
360 correctly prompted for database.
361 kes Integrate multiple console/director patch from
362 Carsten Paeth calle@calle.in-berlin.de
363 ebl Add character substitution in Job/JobDefs WriteBootStrap.
364 You can use now 'WriteBootStrap = '/path/%c_%n.bsr''
365 kes Apply patch supplied in bug #656 to pass priority field
366 in the run dialog to the Director in gnome console
367 kes Restore DCR after VOL_NAME_ERROR in mount.c. Hopefully
368 this will fix bug #627 where Bacula eventually gets
369 confused about what Volume it wants.
370 kes Add a new close_part() class in the SD to save the device
371 state around open/close_part/open for DVD writing. This
372 should fix the num_dvd_parts getting zeroed as reported by
374 kes Apply patch from Richard Mortimer that correct edit code
375 for debug output of st_size.
376 ebl Add support of encrypted data stream to bscan.
377 display data_len instead of data content (may be binary)
379 kes Add dev->close() in dir_ask_sysop_to_mount_volume() in
380 bcopy. Fixes bug #669 reported by Eric.
381 kes Fix incorrect number of arguments in SQL statement in
382 sql_get.c as reported by Eric.
384 kes Update examples directory.
385 kes Remove unused variable in winservice.cpp
386 kes Make Win32 make command build installer.
387 rbn Add new Install Type page, used to select between Automatic
388 and Custom installs. Automatic installs only prompt for
389 configuration items that can't be reasonably defaulted.
390 rbn Added Bacula logo to page headers.
391 rbn Added Upgrade support
392 - Configuration and component selection are migrated from
394 - Configuration of upgraded components is preserved and
396 - Configuration of new components is handled according to
397 the Automatic / Custom selection.
398 - Component selection is defaulted to previously selected
400 rbn Installation of Server components is disabled on
401 Windows 95, 98 and ME.
402 rbn Added URLs for support, info and upgrades to Bacula entry
403 in Add/Remove Programs.
404 rbn Added Version info to Bacula entry in Add/Remove Programs.
406 kes Correct dvd code that breaks tape labeling.
407 kes Implement Enabled on update slots.
409 kes When doing a label, pass the VolBytes back to the Director,
410 which puts it in the catalog.
411 kes Print an error message if the user attempts to prune an
413 kes Need to start using %ld when sscanfing 32 bit values.
415 kes Correct the counting of VolCatBytes for DVDs.
416 kes Add code to mount.c to require that VolCatBytes corresponds to
417 what is actually found when doing an append.
418 kes Update freespace only after writing on the DVD.
419 kes Remove code that blows away the current part in the spool file.
421 kes Apply new dvd-handler patch from Richard Mortimer.
422 kes Tweak so that debug level 20 shows only DVD commands.
423 kes Correct spooled_part flag in dev.c close() so that it is cleared
424 when the spool file is deleted or does not exist.
425 kes Print part number in read_records when eof hit (restore).
426 rbn Installer default changed to start services on new install.
428 kes Make find with no args in tree restore return error rather than
429 stopping the selection. Fixes bug #665
430 kes Rework DVD writing to ensure that the last part is written
431 on open_next_part when dealing with a spool file.
432 kes Correct the lseek_dev() routine to handle end point correctly
433 (bug introduced by me).
434 kes Allow part number to exceed num_dvd_parts in lseek_dev().
435 rbn Change make_session_key on Windows to use WIN32 APIs to produce
437 rbn Add new tool scsilist.exe which displays the changer, tape and
438 CD/DVD (1394, SCSI, SATA, ATAPI) devices and the information required
439 to add them to bacula-sd.conf.
441 kes Apply dvd-handler patch from Richard Mortimer.
442 kes Apply dvd error check patch from Richard Mortimer.
443 kes Apply bpipe race patch from Richard Mortimer.
444 kes Rework how DVD labels are handled and set append only
445 when part > num_dvd_parts.
447 kes Rework many features of DVD writing and reading. Added many error
448 messages. Most importantly changed part to represent the current
449 part number base zero. This makes current DVD writing incompatible
450 with previous version.
452 kes Add host:port to connect failure messages to FD and SD from Dir.
453 kes Add WhereACL to console ACL list. If nothing is specified, only
454 the default is permitted for restore. Otherwise, *all* allows any
455 path, or you can specify permitted paths. This should allow control
456 over where users can restore files. This is untested.
457 kes Modified message to add a ? (as in loaded?) when querying the autochanger
458 for what Slot is loaded.
459 kes Fixed the use of Slot, so that is more correctly maintained, thus
460 eliminating unneeded duplicate calls to determine what Slot is loaded.
462 kes Install man pages with 'make install'
463 kes wx-console crashes because of differences between Bacula and wxWidgets
464 malloc()/free(). Tweak wx-console to use bmalloc()/bfree() for Bacula
466 kes correct improper indenting in wx-console/console_conf.c
467 kes update wx-console header copyrights
468 kes Fix bug #658 where wx-console mangles file/directory names containing
471 kes Add Media.Enabled flag to client backups for dotcmds.c
472 kes Enforce Media.Enabled=1 for a current restore to work.
473 kes Require restore case 3 to have sqlquery permission to work.
474 kes Remove obsolete del_MAC sql command.
475 kes Ensure that bscan creates Volumes with Enabled=1.
477 Version 1.39.20 beta released:
479 kes Correct missing Client table reference in SQL pointed out by
482 kes Fix Win32 build (new entrypoint, start baculafd).
484 kes Add -n option to bconsole to turn off conio.
485 kes Print JobIds to be migrated in Job Report.
486 kes Add additional user supplied notes to the messages part of
487 bacula-dir.conf concerning multiple email addresses.
488 kes Fix an incorrect comment pointed out by a user in dvd_handler.in
489 kes Add more recent Feature requests to Projects file.
491 kes Apply Maritn's fix to src/win32/Makefile.
492 kes Apply Martin's fix to configure.in for pthreads on FreeBSD 4.x
493 kes Implement pruning for Migration and migrated jobs.
494 kes Implement PoolOccupancy migration.
495 kes Implement PoolTime migration.
497 kes If doing a mount, look for a slot, and if specified pass it to
498 the SD so that it can load the autochanger.
499 kes Return DVD=1 flag if a label command is done to a DVD. This
500 permits setting VolParts to 1.
501 kes Apply DVD patch from Richard Mortimer <richm@oldelvet.org.uk>, but
502 rework ua_label code based on DVD media type to use DVD flag returned.
504 kes Eliminate some compile warnings in dird_conf.c
505 kes Format the bytes field in the terminated jobs part of the status
506 command for the three daemons with suffixes to reduce print size
507 of backup bytes. Suggested by a user.
508 kes When not descending into a directory, print the File= name that
509 triggered it -- makes why not descending a bit clearer.
510 kes Do not unload autochanger when doing a list command -- basic code
511 from Eric Bollengier.
513 rbn Reworked the MinGW32 build-dependencies script, it has been renamed
514 to build-depkgs-mingw32. It now handles two options -h to display
515 help and -C to reextract the source and apply the patches. The -C
516 option is useful for updating the source after new patches are
518 rbn Moved the 3rd party package URLs to a separate file External-mingw32.
519 This allows updating to new versions without having to modify the
520 script and makes it easier to figure out which packages and which
522 rbn Added a new script build-depkgs-msvc.cmd which does the same thing
523 as build-depkgs-mingw32 except they are built using Microsoft Visual C
524 and placed in the depkgs-msvc directory. There is also an
525 External-msvc file to describe the packages.
527 rbn Fix Windows cross-compile compatibilty problems with FreeBSD.
529 kes Fix bug #462 incorrect error message printed when client script called
530 from File= was not found.
531 kes Fix bug #558 (waiting for feedback) where Bacula needs too much time to
532 do a rewind on Solaris when no tape is in the drive (Solaris does not
533 have the detailed errno found on Linux). Added Solaris specific code.
534 Note, this may apply to other OSes as well.
536 kes Defined BUILDING_CATS in src/cats/cats.h so that *nix builds.
537 dsb Updated rpm spec for 1.39 - updatedb 9 to 10, add new man pages,
538 fix bug 648 - update sqlite script patches, lock out gnome2console
539 builds for platforms with gtk+ < 2.4.
540 Updated build_rpm.sh - add remote source directory, add switch for
541 signing, refine file names.
542 Updated spec file again for Mandriva build as they have this curious
543 custom of silently converting all manpages to bzip2 format just before
544 the final packaging step.
546 rbn Fixed the Windows Makefiles so that they won't accidentally try and
547 pickup binaries for the Unix build. This allows both the Unix
548 build and the Windows build to be built in the same tree without
549 interfering with each other.
550 rbn Fixed error handling and cleaned up mtx-changer.cmd.
551 rbn Added the rest of the database scripts. These are installed but are
552 not yet edited for variable replacement.
553 rbn Broke out the cats functionality from bacula.dll and put into new
554 separate dlls for each database type. At installation time the
555 correct one is copied to bacula_cats.dll.
556 rbn Eliminate the need to install the mysql.dll on client only builds.
557 rbn Moved dird/sql_cmds.c into the cats directory so all the database
558 specific #ifdefs were in the cats directory.
559 rbn Added a new sql_cmds.h with all the declarations for the variables
560 exported from sql_cmds.c.
561 rbn Moved catalog_db[] from lib/message.c to a new routine db_get_type()
562 which is implemented in bdb.c, mysql.c, postgresql.c and sqlite.c in
564 kes Correct improperly formatted list command output reported by Dan.
566 kes Correct despool time calculation.
568 kes Remove previous changes to compat.cpp as they create problems.
569 kes Use old style MD5 for FileSets to avoid Full saves on every Job.
570 kes Attempt to fix problems with the msg_queue crashing on Solaris
571 when Bacula is terminating, but problems remain.
572 kes Add WIN32_VSS to HAVES in src/Makefile.inc.in to correct VSS
573 name editing problems with too many \\?\es.
574 kes Fix some Bacula source code style problems in compat.cpp.
575 kes Add debug code to compat.cpp and convert non-Bacula debug code
578 kes Change the name of the technical notes file from kes-1.39 to
579 technotes-1.39. Prefix my messages with 'kes '.
580 kes Allow dequeue_messages() to be called twice. Should fix bug
582 kes Add Job type to bscan Job information output.
584 kes Update copyright date in program files, and for the most part
586 kes Implement %q in bsnprintf.c apparently I forgot it.
588 kes Make disk-changer sed command compatible with FreeBSD.
589 kes Make a first cut at a ReleaseNotes and ChangeLog for a
591 kes Make make clean descend into the src/win32 directory.
592 kes Fix some #ifdefing so that Solaris and FreeBSD compile
593 sys/stat.h was turned off.
594 kes Use suffix editing for new transfer rate messages.
595 kes Attempt to come up with a workaround which seems to be an OS
596 bug where write() returns EBUSY. IMO this should not happen.
597 It triggered in truncatebug test. The workaround retries using
599 kes Eliminate a strerror() call in a class method that failed with
601 kes Use rm -rf rather than rmdir to delete the src/win32/release
602 directory during make clean.
604 kes Make bscan ignore ACL streams.
605 kes Update projects files with new Feature Requests.
606 kes Generate current English and French manuals and upload
608 kes Update the home page to include the new British/French flags to
609 switch between translations. Work done by Alexandre Baron.
610 kes Make disk-changer script print an error message if the changer
611 directory is not defined.
612 kes Create a generic DB routine for getting an int (32/64 bit) from
614 kes Add more migration code.
615 kes Add a few more files to .cvsignore here and there.
616 kes Minor fixes for SD write rate and despooling rate.
617 kes Turn off new test code in src/console.c
621 kes Incremented the version number to signify that all of Robert's code
622 for Win32 that was in the branch is now integrated into the HEAD,
623 and that Eric has submitted code that we hope will provide limited
624 backward compatibility with 1.38 file daemons (more testing to be
626 kes I rationalized a few of the names of the variables (mainly jcr names)
627 that are used during migration as keeping three different jcrs at the
628 same time clear in ones head is not easy.
632 eb Tweak new runscript feature to work with 1.38.x FDs.
633 eb Correct crypto.c to fix segfault when restoring an encrypted stream
634 on fd which don't use rsa keys.
635 eb Add yes/no English keywords on localized yes/no questions.
637 kes Several important commits from Robert Nelson for code cleanup and
639 kes Modify console.c so that when conio is enabled, it converts \n to
640 \n\r before outputting to the console. Hopefully this will fix
641 the problems with expect in Perl that Eric saw.
643 kes Change cats/sql.c to eliminate %-*s format, which I think is turned
645 kes Add Comment field to llist of a volume.
646 kes Allow true/false in some yes/no questions.
647 kes Implement update volume enable=(on|off|true|false|archived|0|1|2)
648 kes Remove a few /n's when scanning commands from another daemon. This
649 permits adding additional fields later.
650 kes Modify dbcheck to handle ctl-d and to delete Log table entries.
651 kes Update README.mingw
653 kes Tweak authentication to work with 1.38.x FDs.
654 kes Tweak catalog make scripts.
655 kes Fix catalog upgrade scripts so that they work.
656 kes Correct despooling debug code to eliminate race condition.
658 kes Add additional fields as specified by Arno to LocationLog.
659 kes Add comment field to the Media record.
660 kes Add Time field to the Log record.
661 kes Correct migration SQL (thanks to Bill Moran) so that it
662 runs with PostgreSQL also.
663 kes Add spooling/despooling info in status output of SD.
665 kes Spend a lot of time integrating mkcdrec with the rescue disk.
666 kes Add VOLMGMT message class for volume management messages (none yet).
667 kes Add CATALOG as a destination. It goes into the LOG table.
668 kes Implement the Log table in the DB.
669 kes Implement the Location Log table in the DB (for user use).
670 kes At Eric's request add a run_scripts() just after blast_data in
673 kes Add Enabled column to Location, correct some typos in DB schemas.
674 kes Correct bug I introduced into RunScripts enum.
675 kes Add log table to Catalog
676 kes Purge original job migrated if the migration terminates normally.
677 kes Cleanup purging of files/jobs so that it is done only in a
679 kes Add new VOLMGMT message class.
680 kes Add Catalog message destination (user conf code remains to be written).
682 kes Modify read_record and friends to properly deal with migration
684 kes Update debug code in read_record.
686 ======================= Warning ==========================
687 Separate read and write storage in Jobs in the Director. This
688 is a major rewrite of some of the low level code and hence has
689 a high probability of introducing bugs.
690 ==========================================================
692 kes Move the job init code up to *before* the job is put into
693 the job queue (resource allocation queue). This permits the
694 job to establish whether it will read or write or do both.
695 kes Add name() methods to all the resource classes.
696 kes Implement separate read and write storage resource
697 allocation/deallocation in jobq.c
699 ======================= Warning ==========================
700 Implemented new method of getting the default Storage from the Media
701 record rather than from the MediaType for restore. As a fall
702 back, if no Storage is defined, use the MediaType. This
703 eliminates most all prompts if there are multiple MediaTypes
704 used. This is an important and fundamental change.
705 ==========================================================
707 kes Add more detail (Storage, Device) to list of volumes printed
709 kes More code in migrate. In particular start multiple jobs if
711 kes Probably overkill, but ensure that the bsr is unique even within a
713 kes Rework bsys.c drop() so that it now should work as expected.
714 kes Update a bunch of old copyrights -kes particularly in .h files.
715 kes Remove src/lib/bshm.c/h
719 ======================= Warning ==========================
720 All hash codes in the database are now kept in world
721 compatible base64 format (no = filling). This means that
722 all FileSets will be updated and if you are running
723 verify jobs, you must do an InitCatalog.
724 Authentication uses the new algorithm, but should be
725 backward compatible with 1.38.x
726 ===========================================================
728 kes Modify the authentication routines so that the 1.39.15 Director
729 always runs with the compatible binary to base64 code (same as
730 the rest of the world). It will however detect if an SD or
731 FD is running the old code and if that is the case, will use
732 the old algorithm for authentication. However, all consoles must
733 use the compatible algorithm, and all data entered into the database
734 (all hash signatures, MD5, SHA1, ..., and all FileSet hashes) will
735 use the compatible algorithm.
736 kes Rename the cram_md5 routine names to be slightly more appropriate
737 to what they are doing (challenge and respond).
738 kes Robert committed his #ifdef and header cleanup.
740 kes Fix a compiler warning in files/backup.c
741 kes Cleanup NOT NULL vs DEFAULT 0 in database creation.
743 kes Robert committed his low impact changes.
744 kes I removed a size_t from the jcr.h definition.
745 kes Update the tape regression scripts (still to be tested).
746 kes Add gcc and gcc-c++ requires to srm as suggested by a user.
747 kes Require done or quit to exit from in memory tree restore.
749 kes Write install/uninstall of new manpages. There are now a
750 pile of man pages. Some of which need a lot of work.
752 ======================= Warning ==========================
753 The --mandir ./configure option now points to the top level
754 man directory. The man files will be installed under
755 mandir/man8 and mandir/man1 as appropriate.
756 ==========================================================
758 kes Add complete text of GPL to LICENSE.
759 kes Implement job report that indicates where Storage and Pool
760 came from -kes with overrides and Pool storage and NextPool,
761 it is all very complicated.
762 kes Create a few common subroutines for backup.c and migrate.c
763 kes Eliminate warning messages from tray-monitor.c
765 kes Apply fix for scheduler for missing unlock_jobs().
766 kes Clean out autoconf caches before rebuilding configure
767 kes Fix the FreeBSD pthreads lib define updated by Dan.
768 kes Add missing semicolon in src/console/console.c
769 kes Add Robert's enhanced version of build-win32-cross-tools
770 as well as his patch file.
771 kes Note, the new gcc options are likely to break building of
772 wx-console or the tray-monitor ...
774 kes Implement Robert's suggestion to suppress printing compile lines.
775 kes Detect GCC correctly (I hope)
776 kes If using GCC (actually g++) add the following compiler flags
777 -fno-strict-aliasing -fno-exceptions -fno-rtti
779 ===================== Warning =============================
780 Turn on new bsnprintf() code. This could cause print output
782 ===========================================================
784 kes Fix crypto when not using openssl. I previously overlooked this.
785 kes Eliminate crypto type punning problems by eliminating void * and
786 using uint8_t * instead.
787 kes Harden authentication failure in FD by single threading errors
788 and forcing a 6 second wait.
790 ===================== Warning =============================
791 Removed 'Accept Any Volume' directive.
792 ===========================================================
794 kes Major cleanup and simplification of regress using shell functions
795 (more tests to be converted to new format)
796 kes Add detection of 64 bit Irix as indicated by user.
797 kes Increment catalog database id from 9 to 10.
798 kes Add a few of the new database fields to the various C++
800 kes Implement code to fill in the most important new fields (e.g.
802 kes Ensure that most of the new fields are in create/get/insert/update.
803 More work to be done.
805 kes Update some very old licenses in src/cats.
806 kes Modify the database format for handling Migration jobs:
807 Add PriorJobId, RealEndTime to Job table
809 Remove Stripe from JobMedia record (not used, wasting space)
810 Add ScratchPoolId, RecyclePoolId, Enabled to Media record
811 Add Cost to Location table.
812 kes Delete mac_record subroutines.
813 kes Add new table values to create/update/get routines as appropriate.
814 kes Update the update_tables and make_tables scripts.
815 kes Make a first cut in using a union where multiple pointers (actually
816 pointers to pointers) are stored.
817 kes Make some changes to base64.c suggested by Robert and others and add
818 a small amount of documentation.
819 kes Add some changes suggested by Peter for Solaris (bregex...)
820 kes Make runscript.h always built because it needs to be pulled into
821 more places. In particular its RES was left out of a union.
822 kes Renumber the enum{} list in runscript.h to avoid starting from zero.
823 This makes it slightly easier to detect uninitialized variables.
825 kes Remove xpg4 lib from FreeBSD build as it is no longer needed and
826 sometimes creates install problems.
827 kes Change a couple of %T in strftime to %H:%M:%S as seen in Robert
828 Nelson's code. More to do.
829 kes Convert a few store_bit to store_bool in filed_conf.c.
830 kes DVD tweak to block.c as supplied by Uwe Muessel.
832 kes Modify configure.in to check for typeof().
833 kes In findlib/attribs.c use typeof instead of templates if possible.
835 kes Implement partial error messages for src/filed/acl.c
836 kes Fix return code to fail when doing update barcodes and
837 Pool resource is not found. This previously caused Volumes
838 to be labeled as cleaning tapes.
839 kes Small updates to projects.
841 kes Add Eric Bollengier patch for new RunScript directive. It breaks
842 compatibility between dird and fd.
844 kes Prevent DVD code from rewriting label if the device cannot be
846 kes Used __GNUC__ to detect GNU g++ as suggested by John Goerzen to
847 fix Debian build bug.
848 kes Fix Dir/SD run race in migrate.c, verify.c, and restore.c
849 kes Integrate manpages contributed by Jose Luis.
850 kes Update projects file.
851 kes Add manpages Makefile.in to configure.in
852 kes Remove installation of bacula.8 in scripts directory.
854 kes Implement patch submitted by cesarb in bug #606 to implement O_NOATIME
856 O_NOATIME is a open() flag which makes it possible to read a file without
857 updating the inode atime (and also without the inode ctime update which
858 happens if you try to set the atime back to its previous value). It also
859 prevents a race condition when two programs are reading the same file, but
860 only one does not want to change the atime. It's most useful for backup
861 programs and file integrity checkers (and bacula can fit on both
864 Recent versions of the Linux kernel and glibc have support for it (the
865 glibc support being mostly copying the O_NOATIME definition to
866 bits/fcntl.h). If there's no support for it on the kernel, trying to use
867 it does nothing (since the kernel ignores unknown flags).
869 If the kernel has support for it, trying to use it either works, fails
870 silently (mostly in remote filesystems), or returns errno=EPERM (if you
871 are not either the owner of the file or root). A simple way to prevent the
872 failure is to open the file without the flag and set it later with
873 fcntl(F_SETFL), ignoring any EPERM errors.
874 kes Applied patch posted by Jaime Ventura to bug #570 to correct failure
875 of restarted jobs to complete (due to a destroyed pthreads conditional
876 variable used by the message thread).
877 kes Fixed bug #619 where Bacula would not restart jobs with MaxRestartTimes
879 kes Apply patch from John Goerzen bug #611 to fix bad manual links in the code.
880 kes Apply patch from Rudolf Cejka bug #614 to removed trailing
881 colons in query.sql file.
882 kes Apply patch from Rudolf Cejka bug #613 to correct prunning of files
883 not to create orphans.
884 kes Apply patch from Rudolf Cejka bug #617 to use mtime instead of ctime
885 in restore long listing.
886 kes Apply patch from Rudolf Cejka bug #609 to use MarkId in verify.c instead
887 of incorrect MarkedId.
888 kes Apply patch from adioso bug #616 to correct text in manual (replace
889 Director with File daemon).
890 kes Rework a few of the zlib changes so that they build properly.
893 kes Move DIR 'run' command to SD before starting the message thread
894 as suggested by Cristopher Hull to avoid a race deadlock from
895 two threads using the bsock structure.
896 kes Modify LICENSE to correct some problems pointed out by Debian.
898 kes Correct EOF with no \n lex.c problem.
899 kes Tweak compat.h compat.cpp and merge with apcupsd
900 kes Add additional INFO messages if autochanger cannot be used.
903 kes Simplify Win32 Makefile
904 kes Correct count of buffers/bytes used by smartall.c
905 kes Updated compat.h after porting apcupsd to MinGW.
907 kes Work on getting wx-console building on MinGW. wxWidgets now builds
908 started adding Makefile ...
909 kes Moved MinGW library objects to src/win32/lib to reduce clutter.
911 kes Reloading a bad configuration file doesn't kill director any more.
912 Thanks to fix from Eric Bollengier.
914 kes Fix problem of accents with new Win32 code.
915 kes Integrate Howard's VSS patch. Tweak it a bit. VSS now
916 works in the MinGW build with the exception that there
917 is a problem with accented characters -kes i.e. there is
918 some mapping problem with wide characters.
919 kes The code no longer compiles with Microsoft VC++.
921 kes Start implementing Christopher's St.Bernard code.
922 kes Add Christopher's mods for opening files.
923 kes Strip \r \n from Win32 error messages (Christopher)
924 kes Add more info about Win32 system if unknown (Christopher)
925 kes Use bstrn(cpy, cat) routines to avoid overrun in compat.cpp
926 kes Fix a number of incorrect strings marked for translation, when
927 they should not be (e.g. commands).
928 kes Fix StartTime bug reported for ClientRunBeforeJob and RunBeforeJob
929 Patches supplied by user in bugs #608 and #599.
930 kes Use most recent of st_ctime and st_mtime in restore tree DIR
931 listing. This fixes some problems with Win32 printing incorrect
933 kes Correct the clock shift comm time calculation between the DIR
934 and the FD. It was added rather than subtracted.
935 kes Strip all backslashes in filenames to be restored on Win32
936 machines -kes the names should all be in Unix format, and if
937 there are any backslashes it is most likely due to an improper
938 FileSet definition, and the files will not otherwise be
940 kes Remove lib/regex.c (replaced by bregex.c).
941 kes Delete src/win32/License.txt
942 kes Modify installer to install LICENSE
944 kes Fix bug in build-win32-cross-tools script reported by Howard
945 kes Implement cross compiled bconsole
947 kes Fix barcode test, eliminate BOOL (doesn't exist on Linux).
948 kes Write first cut of README.mingw32
949 kes Add back ua_label barcode fix from Rufolf Cejka.
950 kes Integrate the majority of the Mingw cross-tools submission
951 made by Howard Thomson. Everything compiles, with zlib, openssl,
952 and VSS turned off. Linking needs a pthreads library ...
954 kes Add 'Dir Status' button to the gnome console.
955 kes More work on migration.
956 kes Restore non-compatible base64 coding to permit compatibility.
957 kes Display heap stats in Storage daemon without debug level.
959 kes Integrate most of the MinGW changes -kes more to do.
961 kes Implement using pg_config for finding PostgreSQL files.
962 Fixes bug #600. Patch supplied by user.
963 kes Remove -t option from mktemp in mtx_changer.in and use
964 working directory. Fixes bug #578.
965 kes Update job start time after the any run before job so that
966 files created by the script are only backed up once. Fixes
968 kes Strip trailing newline only from filenames entered in
969 the restore command when reading a file. This permits
970 the user to enter filenames with trailing spaces. Fixes
971 bug #549. The user supplied a patch that I modified slightly.
972 kes Use the most recent time (st_mtime, st_ctime) in the dir
973 command in restore. This gives the user a better idea of what
974 the newest file really is. This fixes bug #574. The fix
975 was suggested by the user.
976 kes Implement a compatible version of base64. This permits external
977 programs to duplicate Bacula's base64 algorithm using standard
978 routines. This fixes bugs #296, and 565. Patch submitted by
980 ================= Note ========================
981 Previous Signatures stored in the database are no longer
982 compatible with this. The main downside is for Verify jobs,
983 and doing an InitCatalog run will fix the problem. Also, the
984 authentication between the deamons is changed, so all daemons
985 must be simultaneously upgraded.
986 ==============================================
987 If you don't like this fix, set:
988 const bool compatible = true;
990 const bool compatible = false;
993 kes Ensure that DB signature is never NULL.
994 kes Ensure that DB table names are not translated.
995 kes Fix scheduler to handle time skew (eg daylight savings).
996 kes Fix scheduler to use lock_jobs() to avoid most problems
997 with reload. Window is now milliseconds.
999 kes Apply patch from Christopher Hull
1000 kes Allow multiple connections to database with different
1002 kes Invalidate the scheduler when doing a reload. Fixes seg
1003 fault, but still 60 second window.
1004 kes Additional info in Reschedule message.
1005 kes Use set_jcr_job_status() everywhere to prevent loss of
1007 kes Display peer IP in FD if error from connecting DIR.
1008 kes Don't increment file count for DIRBEGIN.
1009 kes Replace illegal characters in Win32 filename by _.
1010 kes Add SE_CREATE_PERMANENT_NAME privilege in Win32.
1011 kes Hash hard link filenames rather than linked list.
1012 kes Fix for security failure in chdir on Win32.
1013 kes Add CreateDirectoryA/W win32 API entry points.
1014 kes Add /silent option to Win32 FD for Install/Remove service.
1015 kes Always print Heap statistics in FD.
1017 kes Remove the -f option from the chown in Makefile.in for more
1019 kes Change setting the group in Makefile.in to use chgrp for
1021 kes Implement a write_store and read_store to replace
1022 dirstore in reserve.c
1023 kes Implement a Bacula read/write lock for Python rather
1024 than using the Python lock to avoid recursive problems.
1025 kes Correct the uninstall directory names in filed/Makefile.in
1026 as reported by a user.
1028 kes Correct some problems with database creation (new tables).
1029 kes Replace a bunch of old 0x%x by %p.
1030 kes Get first cut of Migration with Job selection working.
1032 kes Change store_bit() to store_bool() for the Spooling in
1033 dird_conf.c -kes bug reported by Robert Nelson.
1035 kes Correct Makefile bug found by Dan Langille.
1037 kes Correct Makefile for Solaris /bin/sh
1038 kes Correct mtx-changer.in for Solaris /bin/sh
1039 kes Abort if a conf resource does not have a Name =
1041 kes Change the name of the regex program to bregex.
1042 kes Add the bwild program to the tools directory. It is similar
1043 to the bregex program.
1044 kes Implement create bregex.h and bregex.c in src/lib from the
1045 Python regexp program.
1046 kes Use the new bregex.c to implement Regex expressions on Win32.
1048 kes More work on migration.
1049 kes Implement wild program in tools directory for testing
1050 wild-cards. Almost identical to the regex program.
1051 kes Up port VSS single thread locking code.
1052 kes Replace N_(..) by NT_(...) to inhibit translation of
1054 kes Modify Makefile to change the permissions on Working Directory
1055 to 770 if the directory is created.
1056 kes Do not fail the Makefile if changing the permissions or
1057 owner/group on WorkingDir fails.
1058 kes Remove early selection of Scratch Volumes in the recycling
1060 kes Correct the old recycling algorithm so that Scratch Volumes
1061 are selected when looking for a Volume in the changer.
1062 kes Correct a typo in the Verify SQL reported by Joe Park.
1064 kes Remove automatic case folding on Windows FDs. You must
1065 explictly use the 'Ignore Case = yes' option.
1066 kes Remove the code added to 1.38.6 and 1.38.7 that pulls a
1067 scratch volume in an Autochanger early in the 'recycling'
1070 kes Make weof() and clrerror() methods of class DEVICE.
1072 kes Tweak license to include Microsoft restrictions.
1073 kes Move mysql.reconnect to after real_connect(). Thanks to
1074 Frank Sweetser for the patch.
1075 kes Disallow a backslash in a File = directive (Windows junk)
1076 unless the string is quoted.
1077 kes Apply Eric's patch to ua_label.c so that daemon protocol
1079 kes Add NT_ definition for strings that should not be translated.
1080 kes Apply NT_() to ua_label.c
1081 kes Remove timed wait for VSS on Win2K3 as it is not yet
1083 kes Correct bacula.in script to reference bacula-ctl-xx in the
1084 sysconfig directory rather than the bin directory.
1086 kes Fix a long standing bug in the bacula start/stop scripts.
1087 kes Attempt to add the new bacula-ctl-* files to the rpm.
1088 kes Switch to using typeof() for list traversing to avoid
1089 as many FC5 g++ compiler warnings as possible.
1091 kes Split the bacula start/start script into four files:
1092 bacula -kes starts and stops calling other scripts
1093 bacula-ctl-dir -kes starts/stops the director
1094 bacula-ctl-fd -kes starts/stops the File daemon
1095 bacula-ctl-sd -kes starts/stops the Storage daemon
1097 kes Create datestyle fix for PostgreSQL. Fixes bug #574.
1098 kes Correct editing of JobId from int to int64 in fd_cmds.c
1099 kes Eliminate FileSet name race with bash_spaces() and multiple
1100 threads by bashing in a local.
1101 kes Fix error return from 'use storage' to print a correct error
1102 message rather than nothing.
1103 kes Correct false re-read last block error message when two jobs
1104 are simultaneously writing at the end of a tape.
1105 kes Simplify exit conditions in the reserve.c code to avoid
1106 possible non-release of reservation_lock().
1107 kes Suffle lock order in reserve to avoid deadlock between
1108 reservation lock and device mutex.
1110 kes Initialize jcr mutex before first use. Thanks to Thorsten for
1111 tracking this down for me !!!! as it broke the Win32 build.
1113 kes Integrate addition of line count limitation to bsmtp -l from
1114 Sebastian Stark <stark at tuebingen.mpg.de>
1116 kes Implement regex test program in tools directory.
1117 kes Attempt to fix time problem with bsmtp with foreign langs.
1118 kes Add strip_trailing_newline() submitted by user.
1119 kes Implement regex matching in migrate.c
1121 kes Fix bug #537 to allow arbitrary time to mount a volume for
1122 restore, if polling is turned on.
1123 kes If dir_user or dir-group is specified in ./configure apply it to
1124 the working-dir. Fixes bug #533.
1125 kes If rescheduling a job cancel the previous incarnation with the SD.
1126 Fixes bugs #566 and 557.
1127 kes Fix bug #567 do_message() definition type conflict.
1130 kes Add more jcr methods and make mutex and use_count private.
1131 kes Create lock/unlock methods for jcr.
1132 kes Fix PostgreSQL bug doing sql_data_seeek() by explicitly reading
1133 records to get to seek position.
1134 kes Integrate patch from bug #561 to correct conio.c signal definitions.
1135 kes Fix Rescheduling failed Jobs. Ensure that SD message thread
1136 terminates correctly by doing pthread_kill(). Do not destroy
1137 SD cond wait variable between executions of the job. Use local
1138 mutex for cond variable to avoid blocking jcr chain. Fix poor
1139 use of jcr use count in jobq.c for restarted jobs.
1140 kes Fix obsolete usage of foreach_dlist() to use foreach_jcr() in
1141 lib/jcr.c -kes prevents locking the jcr chaing.
1142 kes Apply patch from bug #564, which corrects listing volumes with
1143 multiple autochangers. Apply same fix to next volume list.
1144 kes Fix bug #562 where restore bootstrap file is not unique.
1145 kes More details in implementing David's migration syntax proposal.
1146 kes Save and restore dcr when swapping drives so that if we have
1147 a write dcr it is not lost.
1148 kes Use new routine lock_reservations() to lock the reservations
1149 system, and call it while looking for a volume in askdir.c.
1150 This could possibly fix bug #543.
1151 kes Stop SD command loop if job is canceled.
1154 kes Remove old code from findlib/create_file.c
1155 kes Rename mac.c migrate.c
1156 kes Add user friendly display of VolBytes in job report.
1157 kes Rename target... to previous... to make it a bit easier to
1159 kes Add selection type and selection pattern to Migration (idea
1160 given by David Boyes).
1163 kes The po files should now be current.
1164 kes Fix new sql_use_result() code to properly release the
1165 buffers in all cases.
1166 kes Use the keyword ujobid to mean the unique job id; job or jobname
1167 to mean the Job name given on the Name directive, and jobid to
1168 be the numeric (non-unique) job id.
1169 kes Allow listing by any of the above.
1170 kes Add the user friendly job report code for reporting job elapsed time
1171 and rates with suffexes from John Kodis <kodis at comcast.net>.
1172 kes Add Priority and JobLevel as Python settable items.
1173 kes Use TEMPORARY table creation where the table is created by
1175 kes Add new code submitted by Eric for waiting on specific jobid.
1176 kes Add ACL checking for the dot commands.
1177 kes Fix restore of writable FIFOs.
1178 kes Fix a bug in bpipe where the string was freed too early.
1180 kes Modify the Python class examples to inherit object -kes new way
1181 of defining classes. Patch from Felix Schwarz.
1182 kes Implement jobuid to replace old usage of job in keywords as
1183 suggested by Eric Bollengier.
1184 kes Apply patch for enhancing wait from Eric Bollengier. On can now:
1185 wait (wait for all jobs to stop)
1187 wait jobuid=unique id
1189 kes Implement write variables for Python to set Priority (anytime), and
1190 Job Level, only during JobInit event.
1192 kes Fix the block listing bug pointed out by Arno.
1193 kes Update the po files at Eric's request.
1195 kes Fix Maximum Changer Wait, Maximum Open Wait, Maximum Rewind Wait to
1196 accept time qualifiers.
1197 kes Make catalog respect ACL.
1198 kes Add recycle count to Media record.
1200 Changes to 1.39.6-beta1 24Feb04
1202 kes Add Rudolf Cejka's new rc-chio-changer.
1203 kes Implement pulling Volume from Scratch Pool if the
1204 Volume is in the autochanger.
1205 kes Implement additional command arguments for update Volume.
1209 kes Back port changes to 1.38.5
1210 kes Fix recycle SQL for StorageId.
1211 kes Fix misplaced quote in mtx-changer script.
1213 kes Note. Your database must be updated, or you must create
1214 a new database. I have not yet incremented the database level.
1215 kes Add Location table.
1216 kes Add LocationId, DeviceId, and MediaTypeId to Media record.
1218 kes Implement create/get mac record in database for adding extended
1219 Migration data to the job record.
1220 kes Add new MAC table to update/make database scripts.
1221 kes Return Storage name used when getting VolumeNames for a job.
1222 kes Change bsr file keyword Storage to Device, which is more accurate.
1223 kes Ensure that Mac records are pruned/purged.
1224 kes Tweak SD tools to deal with changing media type.
1225 kes Integrate more dev.c subroutines as methods (e.g. strerror, bsr, ...)
1226 kes Pass pointer to dcr pointer to acquire_device_for_read() so
1227 that the subroutine can switch devices, and hence dcrs.
1228 kes Modify the multiple MediaType read code to re-use the same
1229 dcr when switching devices. This makes the code much more
1231 kes Integrate patch from Karl Hakimian that reads JobIds, FileIndexes
1232 from a table for restore.
1233 kes Add Storage name to VolParams, but it really should be Device.
1235 kes Add disk-changer to scripts directory + configure/Makefile
1236 kes Eliminate PoolId from jcr -kes it is in jcr->jr.PoolId
1237 kes Implement store_bit scanner to replace store_yesno. Mostly done.
1238 kes Implement new store_bool that stores in a bool.
1239 kes Add true/false to yes/no conf directives.
1240 kes Make first cut at changing appropriate store_yesno to store_bool.
1241 kes Complete implementation of Pool storage devices.
1242 kes Move starting clones to job.c
1243 kes Move create_restore_bootstrap_file() to job.c
1244 kes Make copy_storage() more general to be able to handle
1246 kes Cleanup a lot of migration code for manual running, including
1248 kes Move getting a scratch Volume into a subroutine.
1249 kes Make all places a Volume that is added to a pool to
1251 kes Fix bug in autochanger recycle code (improper edit 64 bit).
1252 kes Fix segfault in restore command when no value specified.
1253 kes Start adding code to handle multiple MediaTypes in restore.
1254 kes Eliminate race condition in getting Volume name for
1255 two drive autochanger.
1256 kes More debug code in autochanger.
1257 kes Add storage keyword to bootstrap file, add parsing.
1258 kes Move slot in bsr file into Volume record as there will be
1259 a different slot for each Volume.
1260 kes Create reserve.h
1262 kes Implement Pool storage overrides.
1264 kes Implement first cut of Migration.
1265 kes Implement mysql_use_result() from patch by Karl Hakimian.
1266 This reduces significantly the memory consumption during
1267 the restore tree building, and hence runs faster too.
1268 kes Implement StorageId patch supplied by user (reggie) in bug
1269 #536. This should permit Bacula to work correctly with two
1271 kes Implement Job listing variations suggested by a user.
1272 kes Move updating bootstrap code in backup.c to subroutine
1273 update_bootstrap_file().
1274 kes Add new job status elapsed time and bytes written user
1275 friendly job report output patch sent by John Kodis
1276 <kodis at comcast.ne>.
1277 kes Implement a storage list in Pools.
1278 kes Separate out setup_job() code from run_job().
1279 kes Get migration working -kes lots of changes in mac.c in both
1281 kes Apply patch from user (Eric Bollengier I think) that fixes a
1282 DIR crash when no arguments are supplied to a dot command.
1283 kes Fix typo (strcpy->strcmp) in ua_prune.c as reported by Martin.
1284 kes Fix command arg name->volume in label command of gnome-console.
1285 kes Fix SD acquire.c to release correct DCR by explicitly testing
1286 on the dcr address rather than trying to devine if it is a read
1287 or write dcr. This failed in error conditions when the device was
1291 kes Apply user supplied patch for more readable rate output
1293 kes Continue implementing migration.
1294 kes Implement support for removable filesystems in SD.
1295 kes Ensure that btraceback scripts can be read by anyone.
1296 kes Replace dvd-freespace and dvd-writepart by dvd-handler.
1297 kes Correct bug where canceling restore before the FD contacts
1298 the SD causes the drive to be left in read mode.
1299 kes Move ofline_or_rewind into DEVICE::close().
1300 kes Eliminate close_device.
1301 kes Convert several dev subroutines to methods (e.g. bsf,
1303 kes Eliminate force_close_device().
1304 kes Implement Device Type directive in Device resource that
1305 can have values File, Tape, Fifo, DVD, or Prog.
1306 kes Add has_cap() method to Device.
1309 kes Add patch from bug #527 to allow RedHat user to specify
1310 options/user/group for starting each daemon in
1311 /etc/sysconf/bacula.
1313 kes Add two new queries to query.sql provided by Arno. One
1314 list volumes known to the Storage device, and the other
1315 lists volumes possibly needing replacement (error, ...).
1317 kes Add periodic (every 24 hours) garbage collection of memory
1318 pool by releasing free buffers.
1320 kes Correct bug counting sized (for display only) in smartall.c
1321 kes Print FD mempool stats if debug > 0 rather than 5.
1323 kes Make db_lock() mutex error fail the job rather than abort
1324 Bacula. Canceling the job caused the mutex to fail.
1325 kes Correct bug in alist.c that re-allocated the list if the
1326 number of items goes to zero.
1327 kes Move the reservation system thread locking to the top level
1328 so that one job at a time tries all possible drives before
1330 kes Implement a reservation 'fail' message queue that is built
1331 and destroyed on each pass through the reservation system.
1332 These messages are displayed in a 'Jobs waiting to reserve
1333 a drive' list during a 'status storage='. Note, multiple
1334 messages will generally print for each JobId because they
1335 represent the different problems with either the same drive
1336 or different drives. If this output proves too confusing
1337 of voluminous, I will display it only when debug level 1
1338 or greater is enabled in the SD.
1340 kes Add enable/disable job=<job-name>. This command prevents
1341 the specified job from being scheduled. Even when disabled,
1342 the job can be manually started from the console.
1343 kes During 'update slots' clear all InChanger flags where the
1344 StorageId is zero (old Media records).
1346 Beta release 1.38.4:
1348 kes Fix autochanger code to strip leading spaces from returned
1349 slots number. Remove bc from chio-changer.
1350 kes Back port a bit of 1.39 crypto code to reduce diffs.
1351 kes Fix first call to autochanger that missed close()ing the
1352 drive. Put close() just before each run_program(). Fixes
1355 kes Add PoolId to Job record when updating it at job start time.
1357 kes Pull in more code from 1.39 so that there are fewer file
1358 differences (the new ua_dotcmds.c, base64.h, crypto.h
1359 hmac.c jcr.c (dird and lib) lib.h md5.h parse_conf.c
1360 util.c. Aside from ua_dotcmds.c these are mostly crypto
1362 kes Implement new method of walking the jcr chain. The
1363 incr/dec of the use_count is done within the walking
1364 routines. This should prevent a jcr from being freed
1365 from under the walk routines.
1370 kes Start implementing Verify list output.
1371 kes Move the suitable_drive flag to a better place to prevent
1372 premature termination of the reservation if all drives
1373 are busy -kes should fix Arno's diff/inc pool failures.
1375 kes Add mutex to single thread VSS code in Win32.
1377 kes Simplify code in askdir.c that waits for creating an appendable
1378 volume so that it can handle multiple returns from the wait
1380 kes Modify the wait code to permit multiple returns.
1381 kes Return a zero when 'autochanger drives' is called and
1382 it is not an autochanger.
1383 kes Make rewind_dev() a method taking a DCR as an argument.
1384 This permits closing and reopening the drive if the
1385 rewind fails as happens if the drive was loaded while the
1386 file descriptor was open. This refreshes the file descriptor.
1387 kes Remove the ST_OPENED flag and always rely on fd < 0 for knowing
1388 if the device is open or not. This should eliminate
1390 kes Return error if reserve cannot find at least one suitable device.
1391 kes Make wait_for_sysop() return correct state information.
1392 kes Fix Win32 state file problem. write was not using compat
1393 code. This should fix bug #500.
1395 kes Modify gui on command to set only GUI mode and not batch.
1396 kes Modify .messages command to always print messages regardless
1398 kes If GUI mode is on, suppress automatic printing of
1400 kes Delete old bnet packet code.
1401 kes Ignore new BNET_START_SELECT and BNET_END_SELECT signals in
1402 wx-console. -kes not implemented because bconsole must be updated.
1403 kes Modify restore command in wx-console to set gui on and to use
1404 only .messages instead of messages. Hopefully this fixes bug
1406 kes Fix seg fault in exit of acquire when canceling a job --
1407 reported by Wolfgang Denk
1408 kes Pull in latest reservation system changes from 1.38
1409 kes Make .messages command always print messages regardless
1410 of the automessages flag.
1412 kes Fix seg fault if user labels a drive directory bug #513
1413 kes Remove quotes around Version as it breaks things.
1415 kes Merge in Aleksandar Milivojevic's mods to the spec file.
1416 kes Apply sparse code fix for raw drives and fifos. Bug 506
1417 kes Thorsten fixed Unicode cd problem with wx-console bug 505.
1419 kes Correct reservation system to do a last ditch try
1420 for any mounted volume, then anyone anywhere.
1421 kes Add quotes around table Version because of
1422 error in MySQL 4.1.15 -kes bug report submitted.
1423 kes Correct some minor problems with btape in the fill
1425 kes Updates to ssh-tunnel from Joshua Kugler.
1426 kes Added a report.pl program from Jonas Bjorklund.
1427 kes Simplify the O_NONBLOCK open() code for tape drives,
1428 and always open nonblocking.
1429 kes Do not wait for open() if EIO returned (shouldn't happen).
1430 kes Eliminate 3 argument to tape open().
1431 kes Correct the slot # edited in the 3995 Bad autochanger unload
1433 kes With -S on bscan (show progress) do not divide by zero.
1435 kes Make cancel pthread_cond_signal() pthread_cond_broadcast().
1436 kes When dcr is freed, also broadcast dev->wait_next_vol signal.
1437 kes Remove unused code in wait_for_device.
1438 kes Make wait_for_device() always return after 60 seconds of wait.
1442 kes Add stubs for non-crypto build.
1444 kes Use localhost if no network configured
1446 kes Eliminated duplicate MaxVolBytes in cat update -kes bug 509.
1447 kes Remove debug print.
1448 kes Add bail_out in error during state file reading.
1450 kes Merge changes made to 1.38.3 into HEAD
1451 kes Add stubs for pygtk-console code
1452 kes Create Makefile.in for pygtk-console code
1454 kes Merge updates into 1.38 branch
1455 kes Update specs to include mysql4 define.
1456 kes Fix when attributes are sent, must be after binit().
1457 kes Stop read_record() if status not ok in second loop.
1458 kes Return rec->FileIndex in dcr->VolLastIndex for normal
1459 and partial records in read_record(). This allows bscan
1460 to get FileIndex at EOT correct.
1461 kes Fix butil.c to correctly set dcr -kes fixes seg fault in bls.
1463 kes Fix Win32 built to work with new crypto code.
1464 kes Apply patch supplied by user (slightly modified) to fix
1465 correct detection of holes in block devices and FIFOs.
1467 kes Apply patch supplied by user (slightly modified)
1468 to fix SD hang with multiple pools and bad client
1469 IP. Fixes bug # 508.
1471 kes Add nagios plugin to the examples directory. Submitted by
1473 kes Remove warning message about multiple saves of hardlinked files
1474 from find_one.c as it can generate too many warning messages.
1475 kes Modify most restore error messages to be queued so that they
1476 appear at the end of the job rather than mixted with the restore
1477 listing where they could be 'lost'.
1479 kes Reset timeout values before select() per patch from
1480 Frank Sweetser for problems with non-blocking sockets.
1481 kes Unlink the state file if either reading or writing it gets
1482 errors. Hopefully this will fix Win32 exit problems.
1483 kes Add sanity check in append.c to ensure that dcr is not NULL.
1484 This can happen if multiple drive autochanger SCSI control
1485 channel and drive indicies do not correspond.
1487 kes Get next volume from Scratch pool before creating a volume.
1488 kes Set new Pool defaults in Vol when moved from Scratch Pool.
1489 kes Remove argument from create_bacula_database for SQLite as it
1491 kes Add back index code so that two drive autochangers can get
1493 kes Change a bunch of debug levels to aid debugging autochangers.
1494 kes Fix reservation so that mutexes are properly applied.
1495 kes Rework reservation algorithm so that two drives can be used
1498 kes Landon merged his data encription changes into the HEAD
1499 kes Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
1500 If this patch is applied, the number of days can be specified with
1501 'list nextvol days=xx'
1503 'status dir days=xx'
1504 My use case is to be able to preview the next scheduled job (and the
1505 next tape to be used) on fridays if there are no scheduled jobs during
1509 kes Fix font code in gnome2 console user patch. Fixes bug #501.
1510 kes Fix malformatted bnet error message that caused seg fault
1512 kes Applied user patch to improve README.vc8 in src/win32.
1514 kes Add Migrate, Copy, Archive Job types (some where there)
1515 kes Correct some more editing of JobId's (for 64 bit compatibility).
1516 kes Ensure that StorageId is stored in Media record when ever possible.
1517 kes Add Migration Job to Job.
1518 kes Add Migration Time, Migration High Bytes, Migration Low Bytes
1519 Next Pool to Pool resource.
1520 kes Add more code to mac.c (migration archive copy).
1521 kes Change Start Storage daemon job to require read and write storage
1523 kes Pass read storage data to SD as well as write storage data.
1524 kes Remove old code from winservice.cpp
1525 kes Break on error in scan.
1526 kes Fix typo in signal.c
1527 kes Separate read/write DCR in SD. Add jcr->read_dcr.
1528 kes Cleanup how find_device() works.
1529 kes Add read output to Status in SD.
1532 kes Add red-black btree routines
1534 kes Remove abs() in bfile.c so that it compiles on Solaris.
1537 kes Fix crash in tray-monitor when daemon disconnects. Bug #479.
1538 kes Fix bnet-server bug found on OpenBSD. Bug #486
1539 kes Fix cancel failure bug. Bug #481
1540 kes Fix failure when Pool name has spaces. Bug #487
1541 kes Fix SD crash in autochanger code. Mutex failure. Bug #488
1542 kes Fix a couple of free()s in src/filed/acl.c
1543 kes Fix memory overrun in bfile.c in building OS X resource
1544 fork filename. Bug #489
1545 kes Add Pool name to SD status output.
1547 kes Apply SunOS patch for ACLs submitted by David Duchscher.
1548 kes Make sure to set storage before trying to set drive.
1549 kes Add bacula_mail_summary.sh to examples directory. It makes
1550 a single email summary of any number of jobs. Submitted
1552 kes Make sure when we do a mount to unblock the device even
1553 if the drive could not be opened.
1555 kes Remove the USE_WIN32STREAMEXTRACTION #defines (always on)
1556 and correct a few minor problems to make it build on Linux.
1558 kes Remove delete of CVS from all Makefiles
1559 kes Fix seg fault when clicking on Add button in wx-console
1560 restore panel. Bug #470.
1561 kes Fix copyright date and URL typo -kes bug #468.
1562 kes Change autostart install for FreeBSD to look for rc.conf
1563 rather than rc.local as suggested fix for bug #466.
1564 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1565 grant on status. Bug #465
1566 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1567 update script. Bug #464
1568 kes Tweak #ifdefing a bit in new Win32 stream code.
1569 kes Fix #ifdeffing for FD_NO_SEND_TEST.
1570 kes Add documentation of performance #defines
projects / bacula / bacula / blob