1 Technical notes on version 1.39
5 kes Add additional error messages in acquiring a drive for read.
6 kes Make WritePartAfterJob the default so that the last DVD part
7 always gets written to the DVD by default.
8 kes Add additional error messages in migration.
9 kes Suppress redundant error messages in migration (possibly more to do).
10 kes Apply Martin's fix (updated to 1.39) that takes into account
11 run storage overrides in the Director status display.
12 kes Implement, but turn off the submitted code that sets the EOT
13 model on FreeBSD machines. Turning on this code is too risky at
14 this point in the development.
16 kes Implement unique dbid routine for migration to prevent the same
17 JobId from being migrated twice. This should fix bug #709.
19 kes Apply Jaime Ventura's 'mail on success' patch.
20 kes Add a SMALLOC_SANITY_CHECK for Arno, which aborts Bacula
21 if memory usage gets too big.
22 kes Tweak migration to ensure that read/write devices are different.
24 kes Create an AUTHORS file to list Bacula contributors.
25 kes Add Richard Stallman's four GPL freedoms to LICENSE
26 kes Require the conf file to have a valid NextPool for writing the
29 ebl Enable RecycleCount in catalog.
30 ebl Fix "echo python | bconsole" segfault
32 kes Implement code to pass the MediaId to the SD. The SD then uses
33 this MediaId when creating JobMedia records. This fixes a bug
34 with Migration where the MediaId got set to the second Volume
35 read rather than the write Volume. Possibly (unlikely) fixes
37 kes Remove NextPool from Job resource.
38 kes Edit a few numbers in the restore dialog with commas.
39 kes Note, the DIR<->SD protocol has changed.
41 kes Replace () by {} in configure.in for proper HP configuration.
42 kes Shorten some lines over 80 characters in filed/backup.c
43 kes Cast sizeof() in filed/backup.c to avoid compiler warning.
45 Version 1.39.28 released:
47 kes Change error message 'illegal' to 'invalid' -- bug #707
48 kes Add rather primitive device resource deadlock detection in
49 the job queue handler. It detects the same read and write device
50 for migration and cancels the job.
51 kes Start adding a unique_dbid_hander() routine in migration to avoid
52 duplicate mediaids and duplicate jobids.
53 kes Add patch from bug #708 to permit relative paths such as ../xxx
54 in the restore tree routine.
55 kes Add Eric Bollengier's patch to reduce locking time in the SD after
56 despooling, and thus many jobs finish faster.
57 kes Correct locking order of reservations lock and device mutex in
58 reserve.c -- this should correct Arno's deadlock that occurred
59 when doing mount/unmount at the same time a job is reserving a
62 rbn Fixed problems with encryption when combined with compression
63 or sparse files. Unfortunately this means that all previous
64 encrypted backups can't be restored.
65 rbn Fixed problem in bfgets with Windows and Mac end of lines.
66 rbn Fixed bug in Windows version of close_bpipe() that cause programs
67 like bsmtp() to hang waiting for the pipe to be closed. Fixed
68 binary file type problems in open_bpipe().
69 rbn Fixed a number of bugs in the mysql DB scripts.
71 ebl Fix broken runscript on director. (RunBefore, RunAfter)
72 ebl Use M_ERROR instead of M_FATAL in runscript.c
74 ebl Small fix src/dird/job.c to add JobErrors count to catalog.
75 rbn Ignore UTF-8 marker at the start of .conf files.
76 rbn Add stab2cv to 3rd party dependencies. This is a utility I
77 wrote that is licensed under the GPL and available on SourceForge.
78 It converts the stab debugging info generated by gcc into Codeview
79 format. Currently it just translates function names to global
80 symbols. This is sufficient to get reasonable stack traces from
81 Dr Watson and to look at minidumps.
82 rbn Fix bug # 699 - winbacula client crashes whilerunning bat scripts.
83 rbn Enable Windows XP look and feel for the tray icons and wx-console.
84 rbn Add Windows specific FileSet example to bacula-dir.conf.
85 rbn Reorganize Start menu so that documentation and configuration are
88 rbn Change daemons and utilities so that if -c is omitted from the
89 command line AND there is no configuration file in the current
90 directory then the 'standard' configuration file (eg
91 /etc/bacula/bacula-*.conf) will be used. If the argument to -c
92 doesn't contain any path separators AND there is no configuration
93 file by that name in the current directory then the 'standard'
94 configuration file directory will be searched for a file by that
96 rbn Fixed restore on Windows so that backslashes as path separators works.
97 rbn Add missing query.sql file to Windows installer.
98 rbn Fixed Windows versions of catalog backup scripts.
100 kes Fix optional files in Makefile.in of src/filed that caused
101 a syntax error when using no optional files.
103 lf Fix a cosmetic bug in filed.c that caused spurious OpenSSL error
104 messages; there is no reason to attempt to load a private key.
105 from master key files.
107 Version 1.39.26 released:
109 kes Apply the three patches from Richard Mortimer.
110 bacula-reposition.patch, bacula-tape-reopen.patch, and
111 bacula-eod.patch. This corrects tape positioning on older devices,
112 and also a problem with btape.
113 kes Apply fix from bug report #696 where writing to a FIFO does not
114 work due to a dumb typo.
115 kes Unlock the tape door before the file descriptor is released. This
116 should fix lots of somewhat subtle failures when using an autochanger.
118 kes Correct mtx-changer bug that I introduced in a recent commit, and
119 pointed out by Robert Nelson -- thanks.
120 rbn Fix Windows' daemons so that messages print to stdout if not
121 running as a service.
122 rbn Add daemon name to trace file name (eg bacula-dir.trace).
123 rbn Fix environment variable expansion in directory names on Windows.
124 rbn Fix autochanger support in fill command.
125 rbn Update SQL scripts to match Unix versions.
126 rbn Fix daemon usage displays.
127 rbn Cleanup bacula-dir.conf template.
128 rbn Install openssl.cnf so that the openssl.exe installed in the
129 Bacula\bin directory can be used to generate keys and
130 certificates for TLS and encryption.
131 rbn Fix cleanup of spool files on Windows.
132 rbn Remove /silent option from daemons on Windows. The new default
133 is the same as the old /silent. To enable the message boxes that
134 previously were suppressed by /silent you must add /debug instead.
135 NOTE: As a result of this change, the first time you upgrade from
136 a previous version of 1.39.x you will receive the message
137 boxes when the remove of the old services succeeds. This
138 is the same behaviour as when migrating from a version prior
140 However, going forward, these message boxes will not appear on
141 upgrades or new installs.
142 rbn Add new /debug option. This option enables the message boxes that
143 previously were suppressed by the /silent option. In addition the
144 daemons running as services will open a console window if this
146 rbn Fix bug with service not being removed on migrated installs. This
147 should correct those cases where the file daemon install was failing
148 when upgrading from versions prior to 1.39.x.
150 kes Turn on heap reporting in Dir with zero debug level.
151 kes Send a message to the sys log when Bacula forces a SEG FAULT, and
152 send the same message to stdout.
154 kes Begin work on new GUI 'console'.
155 kes Make configure look in non-standard MySQL library directory
157 kes Make mtx-changer automatically configure the autochanger wait
158 procedure for Solaris, FreeBSD, and Linux. Previously, only Linux
160 kes Correct drop_sqlite_tables.in script to not delete the database.
161 kes When writing to a log file, close and reopen the file descriptor
162 if there is an error writing the file.
163 kes Modify the autochanger loaded?, load, and unload commands to print
164 the full text of any mtx output if there is an error. Helps to
165 ease diagnosis of autochanger problems.
166 kes Correct a few Win32 errno returns in the VSS code so that hopefully
167 a resonable Win32 error message will be printed.
168 kes Convert a few strcat()... to bstrncat() in the Win32 code.
170 rbn Added Windows version of bsmtp.
171 rbn Fixed path search for Windows so that Bacula\bin is automatically
172 searched for programs and scripts.
173 rbn Fixed bugs in mtx-changer.cmd and made template bacula-sd.conf
176 Version 1.39.24 released:
178 kes Apply dvd find volume patch from Richard Mortimer.
179 kes Eliminate the dvd specific mount routines using only the
181 kes Make update_free_space a method of DEVICE and rename
184 kes Require a messages command acl to be able to receive messages
186 kes Add console, system, and scan job types in util.c.
188 kes Print the Volume purged message only for real jobs to keep
189 from cluttering up the daemon messages.
190 kes Lock the tape drive door while Bacula is using the device.
191 kes Add back the 'No Jobs running' message to FD and SD status because
192 my regression script depends on it, and I'm too lazy to change the
194 kes Start using structure assignments (not too happy about it ...).
195 kes Fix a bug in the tools Makefile that broke on Solaris.
196 kes Unload any autochanger drive during a 'release' command.
198 kes Enhance error message when restoring without bootstrap file.
199 kes Check restored size only for regular files.
200 kes Store Python job level in job record in Dir.
201 kes Add back code to open tape device nonblocking, but if rewind fails
202 release file descriptor.
203 kes Modify acquire.c to first try autoloading the device. Also, ask operator
204 to mount tape if drive cannot be opened.
205 rbn Made Windows service tray status windows resizable.
206 rbn Fixed horizontal scrolling of text in status window.
207 rbn Preserve horizontal and vertical scroll position while
208 updating. This prevents the display being reset to the
209 top line every 5 seconds.
210 rbn Fix Windows cross-compile compatibilty problems with
211 *nix variants such as OS X without the zic command.
212 rbn Eliminate dependency on man2html.
214 kes Update src/win32/dll/bacula.def for change in BPIPE definition for
216 kes Fix a compiler warning in compat.cpp
217 kes Change strcpy to bstrncpy in compat.cpp
218 kes Remove some broken code in bdb_list.c
219 kes Fix, hopefully the last, ACL problem in the restore command.
220 kes Update the README.mingw32
221 kes Add new version of upgrade-win32-client.txt to examples directory.
222 Submitted by Michel Meyers.
223 kes Print an INFO message in the job report when a Volume is marked Purged.
224 rbn Fixed handling of external program and script execution
225 so that the format of the command line is more flexible.
226 Now executable path names containing spaces are translated
227 to the equivalent short name automatically. The result is
228 passed to cmd.exe with the quotes removed.
230 kes Apply the recycle patch from Richard Mortimer.
231 kes Convert a few if statements in dev.c to switch statements.
232 kes Start using print_errmsg instead of bstrerror().
233 kes Print a job message in SD when a job is marked to be canceled.
235 kes All code added back. Fixed block.c read/write to loop only 3
236 times. This apparently keeps the OS from crashing (at least
238 kes The kernel bug still persists. Backup something then immediately
239 do a bscan on the same tape, and the kernel will crash.
240 kes Simplifed tape open(). It no longer uses nonblocking mode, which
241 means that opening with no tape loaded will probably take at least
242 6 minutes before an error is reported.
243 kes Do not use MTSETDRVBUFFER if not running as root. Do a MTRESET
244 when doing set_os_device_parameters.
245 kes Report open error in mount.c
246 kes Remove all .exe files from the installer directory on make clean.
248 kes Start adding back removed code.
249 kes Back out a number of changes because backups to tape crash my
251 kes Remove the inetd code from the File daemon.
253 kes Add -c option to pg_dump so that it initializes tables when
255 kes Fix FirstWritten time on Volume to be obtained from SD so that
256 it is the actual time the volume was first written.
257 kes Minor Makefile changes.
258 kes Handle EBUSY during read(). Improve how EBUSY is handled in write().
259 ebl Add yes keyword to prune/purge command
261 kes Correct a test in block.c that prevented restore of a DVD from
262 looking at the last part in the spool directory.
263 kes Make some error messages clearer mostly by using the word DVD
264 in the message. Improve infor message in read_record for DVDs.
265 kes Remove DVD kludges in dircmd.c label/relabel.
266 kes Move the dvd relabel code from dircmd.c into
267 write_new_volume_label_to_dvd() adding a relabel argument.
268 kes Rewrite the truncate_dvd() code to be much simpler and
269 more logical. First blow away any spool part, then create a
270 new empty part and write to the DVD.
271 kes Rewrite the can_write_on_non_blank_dvd() code making it
272 only ensure that no valid data is on the DVD -- i.e. it
275 kes Minor Makefile fixes.
276 kes Put attach_dcr_to_dev in a subroutine.
277 kes Make attaching/detaching to/from a device use a flag and
278 only detach if actually attached.
279 kes Add dvd-simulator.in to scripts directory and add to configure.
280 kes Fix code in acquire.c that checks fd != 0 to use dev->is_open().
281 This could be a cause of a number of drive reservation problems.
282 Note, this code is now in attach_dcr_to_dev().
283 kes Suppress doing Volume updates if it is a system job. This should
284 prevent the DVD label blocking.
285 kes Clear the freespace ok flag in a couple of strategic places.
287 kes Put removing zero sized spool part file in subroutine and
288 call from release_device().
289 kes Add Richard's patch for relabel to dircmd.c, but save and restore
291 kes Rework a lot of subroutines in dev.c to take dcr as an
292 argument. This is done to eliminate the usage of attached_dcrs
294 kes Change truncated_dvd to blank_dvd, which seems more suitable.
295 kes Apply most of Richard Mortimer's truncate patch.
296 kes Create lseek() method for DEVICE that takes dcr as an
297 argument. This is to eliminate the use of attached_dcrs in
298 lseek(). The calls to lseek_dev() must still be changed.
300 kes Apply Richard Mortimer's patches for printing an error
301 message in btape when a DVD is used, and to initialize traceback.
302 kes Added error message to btape when trying to access a file.
303 kes Move prototype of update_slots() to protos.h.
305 kes Add JobErrors, JobFiles, SDJobFiles, SDJobErrors, SDJobStatus,
306 and FDJobStatus to the Director Python variables.
307 kes Make sure valid argument passed to str_to_utime() where Arno
309 kes Apply Richard Mortimer's patch for bcopy, bextract, and bscan.
310 I.e. part of two different patches.
312 kes Modify disk changer to simulate some of the error conditions
314 kes Make sure the close() call in the SD tools is just before the
316 kes Implement dir_get_volume_info() in bls using the patch from
317 Richard Mortimer but call find_num_dvd_parts().
318 kes Implement find_num_dvd_parts() that mounts and scans a DVD
319 and counts the parts.
320 kes Move the omode code in open_dvd() up so that the cannot
321 write on blank disk can check can be bypassed for read mode.
324 kes Disable normal data spooling for DVD writing which uses
325 a different spooling mechanism.
326 kes Apply patch from Richard Mortimer to ensure that the number
327 of DVD parts is correctly updated.
328 rbn Save installer details log in the Bacula directory as
330 rbn Add installer generation of client and storage templates
331 suitable for @inclusion on the director.
332 rbn Mark previously installed Win32 components read-only since
333 deselection doesn't do anything.
335 Version 1.39.22 beta released:
337 kes Fix logic error in handling error return from mtx-changer
339 kes Make status from SD aware of -1 (unknown) Slot status.
340 kes At Eric's suggestion make both the 'slots' and 'drive' commands
341 to the Storage daemon work even if the drive is busy.
342 kes Make two separate Win32 menu links for starting bconsole and
343 wx-console in winbacula.nsi
344 kes Apply DVD part_spooled patch from Richard Mortimer
345 richm@oldelvet.org.uk
346 kes Put installer/Readme.txt into Win32 EOL format for Notebook.
347 rbn Fixed problems migrating settings from previous releases in
348 Win32 installer. Add Readme.txt with an option to show it on
349 the installer Finish page.
351 kes Use get_catalog_resource() to open catalog database
352 to ensure that ACLs are respected and that user is
353 correctly prompted for database.
354 kes Integrate multiple console/director patch from
355 Carsten Paeth calle@calle.in-berlin.de
356 ebl Add character substitution in Job/JobDefs WriteBootStrap.
357 You can use now 'WriteBootStrap = '/path/%c_%n.bsr''
358 kes Apply patch supplied in bug #656 to pass priority field
359 in the run dialog to the Director in gnome console
360 kes Restore DCR after VOL_NAME_ERROR in mount.c. Hopefully
361 this will fix bug #627 where Bacula eventually gets
362 confused about what Volume it wants.
363 kes Add a new close_part() class in the SD to save the device
364 state around open/close_part/open for DVD writing. This
365 should fix the num_dvd_parts getting zeroed as reported by
367 kes Apply patch from Richard Mortimer that correct edit code
368 for debug output of st_size.
369 ebl Add support of encrypted data stream to bscan.
370 display data_len instead of data content (may be binary)
372 kes Add dev->close() in dir_ask_sysop_to_mount_volume() in
373 bcopy. Fixes bug #669 reported by Eric.
374 kes Fix incorrect number of arguments in SQL statement in
375 sql_get.c as reported by Eric.
377 kes Update examples directory.
378 kes Remove unused variable in winservice.cpp
379 kes Make Win32 make command build installer.
380 rbn Add new Install Type page, used to select between Automatic
381 and Custom installs. Automatic installs only prompt for
382 configuration items that can't be reasonably defaulted.
383 rbn Added Bacula logo to page headers.
384 rbn Added Upgrade support
385 - Configuration and component selection are migrated from
387 - Configuration of upgraded components is preserved and
389 - Configuration of new components is handled according to
390 the Automatic / Custom selection.
391 - Component selection is defaulted to previously selected
393 rbn Installation of Server components is disabled on
394 Windows 95, 98 and ME.
395 rbn Added URLs for support, info and upgrades to Bacula entry
396 in Add/Remove Programs.
397 rbn Added Version info to Bacula entry in Add/Remove Programs.
399 kes Correct dvd code that breaks tape labeling.
400 kes Implement Enabled on update slots.
402 kes When doing a label, pass the VolBytes back to the Director,
403 which puts it in the catalog.
404 kes Print an error message if the user attempts to prune an
406 kes Need to start using %ld when sscanfing 32 bit values.
408 kes Correct the counting of VolCatBytes for DVDs.
409 kes Add code to mount.c to require that VolCatBytes corresponds to
410 what is actually found when doing an append.
411 kes Update freespace only after writing on the DVD.
412 kes Remove code that blows away the current part in the spool file.
414 kes Apply new dvd-handler patch from Richard Mortimer.
415 kes Tweak so that debug level 20 shows only DVD commands.
416 kes Correct spooled_part flag in dev.c close() so that it is cleared
417 when the spool file is deleted or does not exist.
418 kes Print part number in read_records when eof hit (restore).
419 rbn Installer default changed to start services on new install.
421 kes Make find with no args in tree restore return error rather than
422 stopping the selection. Fixes bug #665
423 kes Rework DVD writing to ensure that the last part is written
424 on open_next_part when dealing with a spool file.
425 kes Correct the lseek_dev() routine to handle end point correctly
426 (bug introduced by me).
427 kes Allow part number to exceed num_dvd_parts in lseek_dev().
428 rbn Change make_session_key on Windows to use WIN32 APIs to produce
430 rbn Add new tool scsilist.exe which displays the changer, tape and
431 CD/DVD (1394, SCSI, SATA, ATAPI) devices and the information required
432 to add them to bacula-sd.conf.
434 kes Apply dvd-handler patch from Richard Mortimer.
435 kes Apply dvd error check patch from Richard Mortimer.
436 kes Apply bpipe race patch from Richard Mortimer.
437 kes Rework how DVD labels are handled and set append only
438 when part > num_dvd_parts.
440 kes Rework many features of DVD writing and reading. Added many error
441 messages. Most importantly changed part to represent the current
442 part number base zero. This makes current DVD writing incompatible
443 with previous version.
445 kes Add host:port to connect failure messages to FD and SD from Dir.
446 kes Add WhereACL to console ACL list. If nothing is specified, only
447 the default is permitted for restore. Otherwise, *all* allows any
448 path, or you can specify permitted paths. This should allow control
449 over where users can restore files. This is untested.
450 kes Modified message to add a ? (as in loaded?) when querying the autochanger
451 for what Slot is loaded.
452 kes Fixed the use of Slot, so that is more correctly maintained, thus
453 eliminating unneeded duplicate calls to determine what Slot is loaded.
455 kes Install man pages with 'make install'
456 kes wx-console crashes because of differences between Bacula and wxWidgets
457 malloc()/free(). Tweak wx-console to use bmalloc()/bfree() for Bacula
459 kes correct improper indenting in wx-console/console_conf.c
460 kes update wx-console header copyrights
461 kes Fix bug #658 where wx-console mangles file/directory names containing
464 kes Add Media.Enabled flag to client backups for dotcmds.c
465 kes Enforce Media.Enabled=1 for a current restore to work.
466 kes Require restore case 3 to have sqlquery permission to work.
467 kes Remove obsolete del_MAC sql command.
468 kes Ensure that bscan creates Volumes with Enabled=1.
470 Version 1.39.20 beta released:
472 kes Correct missing Client table reference in SQL pointed out by
475 kes Fix Win32 build (new entrypoint, start baculafd).
477 kes Add -n option to bconsole to turn off conio.
478 kes Print JobIds to be migrated in Job Report.
479 kes Add additional user supplied notes to the messages part of
480 bacula-dir.conf concerning multiple email addresses.
481 kes Fix an incorrect comment pointed out by a user in dvd_handler.in
482 kes Add more recent Feature requests to Projects file.
484 kes Apply Maritn's fix to src/win32/Makefile.
485 kes Apply Martin's fix to configure.in for pthreads on FreeBSD 4.x
486 kes Implement pruning for Migration and migrated jobs.
487 kes Implement PoolOccupancy migration.
488 kes Implement PoolTime migration.
490 kes If doing a mount, look for a slot, and if specified pass it to
491 the SD so that it can load the autochanger.
492 kes Return DVD=1 flag if a label command is done to a DVD. This
493 permits setting VolParts to 1.
494 kes Apply DVD patch from Richard Mortimer <richm@oldelvet.org.uk>, but
495 rework ua_label code based on DVD media type to use DVD flag returned.
497 kes Eliminate some compile warnings in dird_conf.c
498 kes Format the bytes field in the terminated jobs part of the status
499 command for the three daemons with suffixes to reduce print size
500 of backup bytes. Suggested by a user.
501 kes When not descending into a directory, print the File= name that
502 triggered it -- makes why not descending a bit clearer.
503 kes Do not unload autochanger when doing a list command -- basic code
504 from Eric Bollengier.
506 rbn Reworked the MinGW32 build-dependencies script, it has been renamed
507 to build-depkgs-mingw32. It now handles two options -h to display
508 help and -C to reextract the source and apply the patches. The -C
509 option is useful for updating the source after new patches are
511 rbn Moved the 3rd party package URLs to a separate file External-mingw32.
512 This allows updating to new versions without having to modify the
513 script and makes it easier to figure out which packages and which
515 rbn Added a new script build-depkgs-msvc.cmd which does the same thing
516 as build-depkgs-mingw32 except they are built using Microsoft Visual C
517 and placed in the depkgs-msvc directory. There is also an
518 External-msvc file to describe the packages.
520 rbn Fix Windows cross-compile compatibilty problems with FreeBSD.
522 kes Fix bug #462 incorrect error message printed when client script called
523 from File= was not found.
524 kes Fix bug #558 (waiting for feedback) where Bacula needs too much time to
525 do a rewind on Solaris when no tape is in the drive (Solaris does not
526 have the detailed errno found on Linux). Added Solaris specific code.
527 Note, this may apply to other OSes as well.
529 kes Defined BUILDING_CATS in src/cats/cats.h so that *nix builds.
530 dsb Updated rpm spec for 1.39 - updatedb 9 to 10, add new man pages,
531 fix bug 648 - update sqlite script patches, lock out gnome2console
532 builds for platforms with gtk+ < 2.4.
533 Updated build_rpm.sh - add remote source directory, add switch for
534 signing, refine file names.
535 Updated spec file again for Mandriva build as they have this curious
536 custom of silently converting all manpages to bzip2 format just before
537 the final packaging step.
539 rbn Fixed the Windows Makefiles so that they won't accidentally try and
540 pickup binaries for the Unix build. This allows both the Unix
541 build and the Windows build to be built in the same tree without
542 interfering with each other.
543 rbn Fixed error handling and cleaned up mtx-changer.cmd.
544 rbn Added the rest of the database scripts. These are installed but are
545 not yet edited for variable replacement.
546 rbn Broke out the cats functionality from bacula.dll and put into new
547 separate dlls for each database type. At installation time the
548 correct one is copied to bacula_cats.dll.
549 rbn Eliminate the need to install the mysql.dll on client only builds.
550 rbn Moved dird/sql_cmds.c into the cats directory so all the database
551 specific #ifdefs were in the cats directory.
552 rbn Added a new sql_cmds.h with all the declarations for the variables
553 exported from sql_cmds.c.
554 rbn Moved catalog_db[] from lib/message.c to a new routine db_get_type()
555 which is implemented in bdb.c, mysql.c, postgresql.c and sqlite.c in
557 kes Correct improperly formatted list command output reported by Dan.
559 kes Correct despool time calculation.
561 kes Remove previous changes to compat.cpp as they create problems.
562 kes Use old style MD5 for FileSets to avoid Full saves on every Job.
563 kes Attempt to fix problems with the msg_queue crashing on Solaris
564 when Bacula is terminating, but problems remain.
565 kes Add WIN32_VSS to HAVES in src/Makefile.inc.in to correct VSS
566 name editing problems with too many \\?\es.
567 kes Fix some Bacula source code style problems in compat.cpp.
568 kes Add debug code to compat.cpp and convert non-Bacula debug code
571 kes Change the name of the technical notes file from kes-1.39 to
572 technotes-1.39. Prefix my messages with 'kes '.
573 kes Allow dequeue_messages() to be called twice. Should fix bug
575 kes Add Job type to bscan Job information output.
577 kes Update copyright date in program files, and for the most part
579 kes Implement %q in bsnprintf.c apparently I forgot it.
581 kes Make disk-changer sed command compatible with FreeBSD.
582 kes Make a first cut at a ReleaseNotes and ChangeLog for a
584 kes Make make clean descend into the src/win32 directory.
585 kes Fix some #ifdefing so that Solaris and FreeBSD compile
586 sys/stat.h was turned off.
587 kes Use suffix editing for new transfer rate messages.
588 kes Attempt to come up with a workaround which seems to be an OS
589 bug where write() returns EBUSY. IMO this should not happen.
590 It triggered in truncatebug test. The workaround retries using
592 kes Eliminate a strerror() call in a class method that failed with
594 kes Use rm -rf rather than rmdir to delete the src/win32/release
595 directory during make clean.
597 kes Make bscan ignore ACL streams.
598 kes Update projects files with new Feature Requests.
599 kes Generate current English and French manuals and upload
601 kes Update the home page to include the new British/French flags to
602 switch between translations. Work done by Alexandre Baron.
603 kes Make disk-changer script print an error message if the changer
604 directory is not defined.
605 kes Create a generic DB routine for getting an int (32/64 bit) from
607 kes Add more migration code.
608 kes Add a few more files to .cvsignore here and there.
609 kes Minor fixes for SD write rate and despooling rate.
610 kes Turn off new test code in src/console.c
614 kes Incremented the version number to signify that all of Robert's code
615 for Win32 that was in the branch is now integrated into the HEAD,
616 and that Eric has submitted code that we hope will provide limited
617 backward compatibility with 1.38 file daemons (more testing to be
619 kes I rationalized a few of the names of the variables (mainly jcr names)
620 that are used during migration as keeping three different jcrs at the
621 same time clear in ones head is not easy.
625 eb Tweak new runscript feature to work with 1.38.x FDs.
626 eb Correct crypto.c to fix segfault when restoring an encrypted stream
627 on fd which don't use rsa keys.
628 eb Add yes/no English keywords on localized yes/no questions.
630 kes Several important commits from Robert Nelson for code cleanup and
632 kes Modify console.c so that when conio is enabled, it converts \n to
633 \n\r before outputting to the console. Hopefully this will fix
634 the problems with expect in Perl that Eric saw.
636 kes Change cats/sql.c to eliminate %-*s format, which I think is turned
638 kes Add Comment field to llist of a volume.
639 kes Allow true/false in some yes/no questions.
640 kes Implement update volume enable=(on|off|true|false|archived|0|1|2)
641 kes Remove a few /n's when scanning commands from another daemon. This
642 permits adding additional fields later.
643 kes Modify dbcheck to handle ctl-d and to delete Log table entries.
644 kes Update README.mingw
646 kes Tweak authentication to work with 1.38.x FDs.
647 kes Tweak catalog make scripts.
648 kes Fix catalog upgrade scripts so that they work.
649 kes Correct despooling debug code to eliminate race condition.
651 kes Add additional fields as specified by Arno to LocationLog.
652 kes Add comment field to the Media record.
653 kes Add Time field to the Log record.
654 kes Correct migration SQL (thanks to Bill Moran) so that it
655 runs with PostgreSQL also.
656 kes Add spooling/despooling info in status output of SD.
658 kes Spend a lot of time integrating mkcdrec with the rescue disk.
659 kes Add VOLMGMT message class for volume management messages (none yet).
660 kes Add CATALOG as a destination. It goes into the LOG table.
661 kes Implement the Log table in the DB.
662 kes Implement the Location Log table in the DB (for user use).
663 kes At Eric's request add a run_scripts() just after blast_data in
666 kes Add Enabled column to Location, correct some typos in DB schemas.
667 kes Correct bug I introduced into RunScripts enum.
668 kes Add log table to Catalog
669 kes Purge original job migrated if the migration terminates normally.
670 kes Cleanup purging of files/jobs so that it is done only in a
672 kes Add new VOLMGMT message class.
673 kes Add Catalog message destination (user conf code remains to be written).
675 kes Modify read_record and friends to properly deal with migration
677 kes Update debug code in read_record.
679 ======================= Warning ==========================
680 Separate read and write storage in Jobs in the Director. This
681 is a major rewrite of some of the low level code and hence has
682 a high probability of introducing bugs.
683 ==========================================================
685 kes Move the job init code up to *before* the job is put into
686 the job queue (resource allocation queue). This permits the
687 job to establish whether it will read or write or do both.
688 kes Add name() methods to all the resource classes.
689 kes Implement separate read and write storage resource
690 allocation/deallocation in jobq.c
692 ======================= Warning ==========================
693 Implemented new method of getting the default Storage from the Media
694 record rather than from the MediaType for restore. As a fall
695 back, if no Storage is defined, use the MediaType. This
696 eliminates most all prompts if there are multiple MediaTypes
697 used. This is an important and fundamental change.
698 ==========================================================
700 kes Add more detail (Storage, Device) to list of volumes printed
702 kes More code in migrate. In particular start multiple jobs if
704 kes Probably overkill, but ensure that the bsr is unique even within a
706 kes Rework bsys.c drop() so that it now should work as expected.
707 kes Update a bunch of old copyrights -kes particularly in .h files.
708 kes Remove src/lib/bshm.c/h
712 ======================= Warning ==========================
713 All hash codes in the database are now kept in world
714 compatible base64 format (no = filling). This means that
715 all FileSets will be updated and if you are running
716 verify jobs, you must do an InitCatalog.
717 Authentication uses the new algorithm, but should be
718 backward compatible with 1.38.x
719 ===========================================================
721 kes Modify the authentication routines so that the 1.39.15 Director
722 always runs with the compatible binary to base64 code (same as
723 the rest of the world). It will however detect if an SD or
724 FD is running the old code and if that is the case, will use
725 the old algorithm for authentication. However, all consoles must
726 use the compatible algorithm, and all data entered into the database
727 (all hash signatures, MD5, SHA1, ..., and all FileSet hashes) will
728 use the compatible algorithm.
729 kes Rename the cram_md5 routine names to be slightly more appropriate
730 to what they are doing (challenge and respond).
731 kes Robert committed his #ifdef and header cleanup.
733 kes Fix a compiler warning in files/backup.c
734 kes Cleanup NOT NULL vs DEFAULT 0 in database creation.
736 kes Robert committed his low impact changes.
737 kes I removed a size_t from the jcr.h definition.
738 kes Update the tape regression scripts (still to be tested).
739 kes Add gcc and gcc-c++ requires to srm as suggested by a user.
740 kes Require done or quit to exit from in memory tree restore.
742 kes Write install/uninstall of new manpages. There are now a
743 pile of man pages. Some of which need a lot of work.
745 ======================= Warning ==========================
746 The --mandir ./configure option now points to the top level
747 man directory. The man files will be installed under
748 mandir/man8 and mandir/man1 as appropriate.
749 ==========================================================
751 kes Add complete text of GPL to LICENSE.
752 kes Implement job report that indicates where Storage and Pool
753 came from -kes with overrides and Pool storage and NextPool,
754 it is all very complicated.
755 kes Create a few common subroutines for backup.c and migrate.c
756 kes Eliminate warning messages from tray-monitor.c
758 kes Apply fix for scheduler for missing unlock_jobs().
759 kes Clean out autoconf caches before rebuilding configure
760 kes Fix the FreeBSD pthreads lib define updated by Dan.
761 kes Add missing semicolon in src/console/console.c
762 kes Add Robert's enhanced version of build-win32-cross-tools
763 as well as his patch file.
764 kes Note, the new gcc options are likely to break building of
765 wx-console or the tray-monitor ...
767 kes Implement Robert's suggestion to suppress printing compile lines.
768 kes Detect GCC correctly (I hope)
769 kes If using GCC (actually g++) add the following compiler flags
770 -fno-strict-aliasing -fno-exceptions -fno-rtti
772 ===================== Warning =============================
773 Turn on new bsnprintf() code. This could cause print output
775 ===========================================================
777 kes Fix crypto when not using openssl. I previously overlooked this.
778 kes Eliminate crypto type punning problems by eliminating void * and
779 using uint8_t * instead.
780 kes Harden authentication failure in FD by single threading errors
781 and forcing a 6 second wait.
783 ===================== Warning =============================
784 Removed 'Accept Any Volume' directive.
785 ===========================================================
787 kes Major cleanup and simplification of regress using shell functions
788 (more tests to be converted to new format)
789 kes Add detection of 64 bit Irix as indicated by user.
790 kes Increment catalog database id from 9 to 10.
791 kes Add a few of the new database fields to the various C++
793 kes Implement code to fill in the most important new fields (e.g.
795 kes Ensure that most of the new fields are in create/get/insert/update.
796 More work to be done.
798 kes Update some very old licenses in src/cats.
799 kes Modify the database format for handling Migration jobs:
800 Add PriorJobId, RealEndTime to Job table
802 Remove Stripe from JobMedia record (not used, wasting space)
803 Add ScratchPoolId, RecyclePoolId, Enabled to Media record
804 Add Cost to Location table.
805 kes Delete mac_record subroutines.
806 kes Add new table values to create/update/get routines as appropriate.
807 kes Update the update_tables and make_tables scripts.
808 kes Make a first cut in using a union where multiple pointers (actually
809 pointers to pointers) are stored.
810 kes Make some changes to base64.c suggested by Robert and others and add
811 a small amount of documentation.
812 kes Add some changes suggested by Peter for Solaris (bregex...)
813 kes Make runscript.h always built because it needs to be pulled into
814 more places. In particular its RES was left out of a union.
815 kes Renumber the enum{} list in runscript.h to avoid starting from zero.
816 This makes it slightly easier to detect uninitialized variables.
818 kes Remove xpg4 lib from FreeBSD build as it is no longer needed and
819 sometimes creates install problems.
820 kes Change a couple of %T in strftime to %H:%M:%S as seen in Robert
821 Nelson's code. More to do.
822 kes Convert a few store_bit to store_bool in filed_conf.c.
823 kes DVD tweak to block.c as supplied by Uwe Muessel.
825 kes Modify configure.in to check for typeof().
826 kes In findlib/attribs.c use typeof instead of templates if possible.
828 kes Implement partial error messages for src/filed/acl.c
829 kes Fix return code to fail when doing update barcodes and
830 Pool resource is not found. This previously caused Volumes
831 to be labeled as cleaning tapes.
832 kes Small updates to projects.
834 kes Add Eric Bollengier patch for new RunScript directive. It breaks
835 compatibility between dird and fd.
837 kes Prevent DVD code from rewriting label if the device cannot be
839 kes Used __GNUC__ to detect GNU g++ as suggested by John Goerzen to
840 fix Debian build bug.
841 kes Fix Dir/SD run race in migrate.c, verify.c, and restore.c
842 kes Integrate manpages contributed by Jose Luis.
843 kes Update projects file.
844 kes Add manpages Makefile.in to configure.in
845 kes Remove installation of bacula.8 in scripts directory.
847 kes Implement patch submitted by cesarb in bug #606 to implement O_NOATIME
849 O_NOATIME is a open() flag which makes it possible to read a file without
850 updating the inode atime (and also without the inode ctime update which
851 happens if you try to set the atime back to its previous value). It also
852 prevents a race condition when two programs are reading the same file, but
853 only one does not want to change the atime. It's most useful for backup
854 programs and file integrity checkers (and bacula can fit on both
857 Recent versions of the Linux kernel and glibc have support for it (the
858 glibc support being mostly copying the O_NOATIME definition to
859 bits/fcntl.h). If there's no support for it on the kernel, trying to use
860 it does nothing (since the kernel ignores unknown flags).
862 If the kernel has support for it, trying to use it either works, fails
863 silently (mostly in remote filesystems), or returns errno=EPERM (if you
864 are not either the owner of the file or root). A simple way to prevent the
865 failure is to open the file without the flag and set it later with
866 fcntl(F_SETFL), ignoring any EPERM errors.
867 kes Applied patch posted by Jaime Ventura to bug #570 to correct failure
868 of restarted jobs to complete (due to a destroyed pthreads conditional
869 variable used by the message thread).
870 kes Fixed bug #619 where Bacula would not restart jobs with MaxRestartTimes
872 kes Apply patch from John Goerzen bug #611 to fix bad manual links in the code.
873 kes Apply patch from Rudolf Cejka bug #614 to removed trailing
874 colons in query.sql file.
875 kes Apply patch from Rudolf Cejka bug #613 to correct prunning of files
876 not to create orphans.
877 kes Apply patch from Rudolf Cejka bug #617 to use mtime instead of ctime
878 in restore long listing.
879 kes Apply patch from Rudolf Cejka bug #609 to use MarkId in verify.c instead
880 of incorrect MarkedId.
881 kes Apply patch from adioso bug #616 to correct text in manual (replace
882 Director with File daemon).
883 kes Rework a few of the zlib changes so that they build properly.
886 kes Move DIR 'run' command to SD before starting the message thread
887 as suggested by Cristopher Hull to avoid a race deadlock from
888 two threads using the bsock structure.
889 kes Modify LICENSE to correct some problems pointed out by Debian.
891 kes Correct EOF with no \n lex.c problem.
892 kes Tweak compat.h compat.cpp and merge with apcupsd
893 kes Add additional INFO messages if autochanger cannot be used.
896 kes Simplify Win32 Makefile
897 kes Correct count of buffers/bytes used by smartall.c
898 kes Updated compat.h after porting apcupsd to MinGW.
900 kes Work on getting wx-console building on MinGW. wxWidgets now builds
901 started adding Makefile ...
902 kes Moved MinGW library objects to src/win32/lib to reduce clutter.
904 kes Reloading a bad configuration file doesn't kill director any more.
905 Thanks to fix from Eric Bollengier.
907 kes Fix problem of accents with new Win32 code.
908 kes Integrate Howard's VSS patch. Tweak it a bit. VSS now
909 works in the MinGW build with the exception that there
910 is a problem with accented characters -kes i.e. there is
911 some mapping problem with wide characters.
912 kes The code no longer compiles with Microsoft VC++.
914 kes Start implementing Christopher's St.Bernard code.
915 kes Add Christopher's mods for opening files.
916 kes Strip \r \n from Win32 error messages (Christopher)
917 kes Add more info about Win32 system if unknown (Christopher)
918 kes Use bstrn(cpy, cat) routines to avoid overrun in compat.cpp
919 kes Fix a number of incorrect strings marked for translation, when
920 they should not be (e.g. commands).
921 kes Fix StartTime bug reported for ClientRunBeforeJob and RunBeforeJob
922 Patches supplied by user in bugs #608 and #599.
923 kes Use most recent of st_ctime and st_mtime in restore tree DIR
924 listing. This fixes some problems with Win32 printing incorrect
926 kes Correct the clock shift comm time calculation between the DIR
927 and the FD. It was added rather than subtracted.
928 kes Strip all backslashes in filenames to be restored on Win32
929 machines -kes the names should all be in Unix format, and if
930 there are any backslashes it is most likely due to an improper
931 FileSet definition, and the files will not otherwise be
933 kes Remove lib/regex.c (replaced by bregex.c).
934 kes Delete src/win32/License.txt
935 kes Modify installer to install LICENSE
937 kes Fix bug in build-win32-cross-tools script reported by Howard
938 kes Implement cross compiled bconsole
940 kes Fix barcode test, eliminate BOOL (doesn't exist on Linux).
941 kes Write first cut of README.mingw32
942 kes Add back ua_label barcode fix from Rufolf Cejka.
943 kes Integrate the majority of the Mingw cross-tools submission
944 made by Howard Thomson. Everything compiles, with zlib, openssl,
945 and VSS turned off. Linking needs a pthreads library ...
947 kes Add 'Dir Status' button to the gnome console.
948 kes More work on migration.
949 kes Restore non-compatible base64 coding to permit compatibility.
950 kes Display heap stats in Storage daemon without debug level.
952 kes Integrate most of the MinGW changes -kes more to do.
954 kes Implement using pg_config for finding PostgreSQL files.
955 Fixes bug #600. Patch supplied by user.
956 kes Remove -t option from mktemp in mtx_changer.in and use
957 working directory. Fixes bug #578.
958 kes Update job start time after the any run before job so that
959 files created by the script are only backed up once. Fixes
961 kes Strip trailing newline only from filenames entered in
962 the restore command when reading a file. This permits
963 the user to enter filenames with trailing spaces. Fixes
964 bug #549. The user supplied a patch that I modified slightly.
965 kes Use the most recent time (st_mtime, st_ctime) in the dir
966 command in restore. This gives the user a better idea of what
967 the newest file really is. This fixes bug #574. The fix
968 was suggested by the user.
969 kes Implement a compatible version of base64. This permits external
970 programs to duplicate Bacula's base64 algorithm using standard
971 routines. This fixes bugs #296, and 565. Patch submitted by
973 ================= Note ========================
974 Previous Signatures stored in the database are no longer
975 compatible with this. The main downside is for Verify jobs,
976 and doing an InitCatalog run will fix the problem. Also, the
977 authentication between the deamons is changed, so all daemons
978 must be simultaneously upgraded.
979 ==============================================
980 If you don't like this fix, set:
981 const bool compatible = true;
983 const bool compatible = false;
986 kes Ensure that DB signature is never NULL.
987 kes Ensure that DB table names are not translated.
988 kes Fix scheduler to handle time skew (eg daylight savings).
989 kes Fix scheduler to use lock_jobs() to avoid most problems
990 with reload. Window is now milliseconds.
992 kes Apply patch from Christopher Hull
993 kes Allow multiple connections to database with different
995 kes Invalidate the scheduler when doing a reload. Fixes seg
996 fault, but still 60 second window.
997 kes Additional info in Reschedule message.
998 kes Use set_jcr_job_status() everywhere to prevent loss of
1000 kes Display peer IP in FD if error from connecting DIR.
1001 kes Don't increment file count for DIRBEGIN.
1002 kes Replace illegal characters in Win32 filename by _.
1003 kes Add SE_CREATE_PERMANENT_NAME privilege in Win32.
1004 kes Hash hard link filenames rather than linked list.
1005 kes Fix for security failure in chdir on Win32.
1006 kes Add CreateDirectoryA/W win32 API entry points.
1007 kes Add /silent option to Win32 FD for Install/Remove service.
1008 kes Always print Heap statistics in FD.
1010 kes Remove the -f option from the chown in Makefile.in for more
1012 kes Change setting the group in Makefile.in to use chgrp for
1014 kes Implement a write_store and read_store to replace
1015 dirstore in reserve.c
1016 kes Implement a Bacula read/write lock for Python rather
1017 than using the Python lock to avoid recursive problems.
1018 kes Correct the uninstall directory names in filed/Makefile.in
1019 as reported by a user.
1021 kes Correct some problems with database creation (new tables).
1022 kes Replace a bunch of old 0x%x by %p.
1023 kes Get first cut of Migration with Job selection working.
1025 kes Change store_bit() to store_bool() for the Spooling in
1026 dird_conf.c -kes bug reported by Robert Nelson.
1028 kes Correct Makefile bug found by Dan Langille.
1030 kes Correct Makefile for Solaris /bin/sh
1031 kes Correct mtx-changer.in for Solaris /bin/sh
1032 kes Abort if a conf resource does not have a Name =
1034 kes Change the name of the regex program to bregex.
1035 kes Add the bwild program to the tools directory. It is similar
1036 to the bregex program.
1037 kes Implement create bregex.h and bregex.c in src/lib from the
1038 Python regexp program.
1039 kes Use the new bregex.c to implement Regex expressions on Win32.
1041 kes More work on migration.
1042 kes Implement wild program in tools directory for testing
1043 wild-cards. Almost identical to the regex program.
1044 kes Up port VSS single thread locking code.
1045 kes Replace N_(..) by NT_(...) to inhibit translation of
1047 kes Modify Makefile to change the permissions on Working Directory
1048 to 770 if the directory is created.
1049 kes Do not fail the Makefile if changing the permissions or
1050 owner/group on WorkingDir fails.
1051 kes Remove early selection of Scratch Volumes in the recycling
1053 kes Correct the old recycling algorithm so that Scratch Volumes
1054 are selected when looking for a Volume in the changer.
1055 kes Correct a typo in the Verify SQL reported by Joe Park.
1057 kes Remove automatic case folding on Windows FDs. You must
1058 explictly use the 'Ignore Case = yes' option.
1059 kes Remove the code added to 1.38.6 and 1.38.7 that pulls a
1060 scratch volume in an Autochanger early in the 'recycling'
1063 kes Make weof() and clrerror() methods of class DEVICE.
1065 kes Tweak license to include Microsoft restrictions.
1066 kes Move mysql.reconnect to after real_connect(). Thanks to
1067 Frank Sweetser for the patch.
1068 kes Disallow a backslash in a File = directive (Windows junk)
1069 unless the string is quoted.
1070 kes Apply Eric's patch to ua_label.c so that daemon protocol
1072 kes Add NT_ definition for strings that should not be translated.
1073 kes Apply NT_() to ua_label.c
1074 kes Remove timed wait for VSS on Win2K3 as it is not yet
1076 kes Correct bacula.in script to reference bacula-ctl-xx in the
1077 sysconfig directory rather than the bin directory.
1079 kes Fix a long standing bug in the bacula start/stop scripts.
1080 kes Attempt to add the new bacula-ctl-* files to the rpm.
1081 kes Switch to using typeof() for list traversing to avoid
1082 as many FC5 g++ compiler warnings as possible.
1084 kes Split the bacula start/start script into four files:
1085 bacula -kes starts and stops calling other scripts
1086 bacula-ctl-dir -kes starts/stops the director
1087 bacula-ctl-fd -kes starts/stops the File daemon
1088 bacula-ctl-sd -kes starts/stops the Storage daemon
1090 kes Create datestyle fix for PostgreSQL. Fixes bug #574.
1091 kes Correct editing of JobId from int to int64 in fd_cmds.c
1092 kes Eliminate FileSet name race with bash_spaces() and multiple
1093 threads by bashing in a local.
1094 kes Fix error return from 'use storage' to print a correct error
1095 message rather than nothing.
1096 kes Correct false re-read last block error message when two jobs
1097 are simultaneously writing at the end of a tape.
1098 kes Simplify exit conditions in the reserve.c code to avoid
1099 possible non-release of reservation_lock().
1100 kes Suffle lock order in reserve to avoid deadlock between
1101 reservation lock and device mutex.
1103 kes Initialize jcr mutex before first use. Thanks to Thorsten for
1104 tracking this down for me !!!! as it broke the Win32 build.
1106 kes Integrate addition of line count limitation to bsmtp -l from
1107 Sebastian Stark <stark at tuebingen.mpg.de>
1109 kes Implement regex test program in tools directory.
1110 kes Attempt to fix time problem with bsmtp with foreign langs.
1111 kes Add strip_trailing_newline() submitted by user.
1112 kes Implement regex matching in migrate.c
1114 kes Fix bug #537 to allow arbitrary time to mount a volume for
1115 restore, if polling is turned on.
1116 kes If dir_user or dir-group is specified in ./configure apply it to
1117 the working-dir. Fixes bug #533.
1118 kes If rescheduling a job cancel the previous incarnation with the SD.
1119 Fixes bugs #566 and 557.
1120 kes Fix bug #567 do_message() definition type conflict.
1123 kes Add more jcr methods and make mutex and use_count private.
1124 kes Create lock/unlock methods for jcr.
1125 kes Fix PostgreSQL bug doing sql_data_seeek() by explicitly reading
1126 records to get to seek position.
1127 kes Integrate patch from bug #561 to correct conio.c signal definitions.
1128 kes Fix Rescheduling failed Jobs. Ensure that SD message thread
1129 terminates correctly by doing pthread_kill(). Do not destroy
1130 SD cond wait variable between executions of the job. Use local
1131 mutex for cond variable to avoid blocking jcr chain. Fix poor
1132 use of jcr use count in jobq.c for restarted jobs.
1133 kes Fix obsolete usage of foreach_dlist() to use foreach_jcr() in
1134 lib/jcr.c -kes prevents locking the jcr chaing.
1135 kes Apply patch from bug #564, which corrects listing volumes with
1136 multiple autochangers. Apply same fix to next volume list.
1137 kes Fix bug #562 where restore bootstrap file is not unique.
1138 kes More details in implementing David's migration syntax proposal.
1139 kes Save and restore dcr when swapping drives so that if we have
1140 a write dcr it is not lost.
1141 kes Use new routine lock_reservations() to lock the reservations
1142 system, and call it while looking for a volume in askdir.c.
1143 This could possibly fix bug #543.
1144 kes Stop SD command loop if job is canceled.
1147 kes Remove old code from findlib/create_file.c
1148 kes Rename mac.c migrate.c
1149 kes Add user friendly display of VolBytes in job report.
1150 kes Rename target... to previous... to make it a bit easier to
1152 kes Add selection type and selection pattern to Migration (idea
1153 given by David Boyes).
1156 kes The po files should now be current.
1157 kes Fix new sql_use_result() code to properly release the
1158 buffers in all cases.
1159 kes Use the keyword ujobid to mean the unique job id; job or jobname
1160 to mean the Job name given on the Name directive, and jobid to
1161 be the numeric (non-unique) job id.
1162 kes Allow listing by any of the above.
1163 kes Add the user friendly job report code for reporting job elapsed time
1164 and rates with suffexes from John Kodis <kodis at comcast.net>.
1165 kes Add Priority and JobLevel as Python settable items.
1166 kes Use TEMPORARY table creation where the table is created by
1168 kes Add new code submitted by Eric for waiting on specific jobid.
1169 kes Add ACL checking for the dot commands.
1170 kes Fix restore of writable FIFOs.
1171 kes Fix a bug in bpipe where the string was freed too early.
1173 kes Modify the Python class examples to inherit object -kes new way
1174 of defining classes. Patch from Felix Schwarz.
1175 kes Implement jobuid to replace old usage of job in keywords as
1176 suggested by Eric Bollengier.
1177 kes Apply patch for enhancing wait from Eric Bollengier. On can now:
1178 wait (wait for all jobs to stop)
1180 wait jobuid=unique id
1182 kes Implement write variables for Python to set Priority (anytime), and
1183 Job Level, only during JobInit event.
1185 kes Fix the block listing bug pointed out by Arno.
1186 kes Update the po files at Eric's request.
1188 kes Fix Maximum Changer Wait, Maximum Open Wait, Maximum Rewind Wait to
1189 accept time qualifiers.
1190 kes Make catalog respect ACL.
1191 kes Add recycle count to Media record.
1193 Changes to 1.39.6-beta1 24Feb04
1195 kes Add Rudolf Cejka's new rc-chio-changer.
1196 kes Implement pulling Volume from Scratch Pool if the
1197 Volume is in the autochanger.
1198 kes Implement additional command arguments for update Volume.
1202 kes Back port changes to 1.38.5
1203 kes Fix recycle SQL for StorageId.
1204 kes Fix misplaced quote in mtx-changer script.
1206 kes Note. Your database must be updated, or you must create
1207 a new database. I have not yet incremented the database level.
1208 kes Add Location table.
1209 kes Add LocationId, DeviceId, and MediaTypeId to Media record.
1211 kes Implement create/get mac record in database for adding extended
1212 Migration data to the job record.
1213 kes Add new MAC table to update/make database scripts.
1214 kes Return Storage name used when getting VolumeNames for a job.
1215 kes Change bsr file keyword Storage to Device, which is more accurate.
1216 kes Ensure that Mac records are pruned/purged.
1217 kes Tweak SD tools to deal with changing media type.
1218 kes Integrate more dev.c subroutines as methods (e.g. strerror, bsr, ...)
1219 kes Pass pointer to dcr pointer to acquire_device_for_read() so
1220 that the subroutine can switch devices, and hence dcrs.
1221 kes Modify the multiple MediaType read code to re-use the same
1222 dcr when switching devices. This makes the code much more
1224 kes Integrate patch from Karl Hakimian that reads JobIds, FileIndexes
1225 from a table for restore.
1226 kes Add Storage name to VolParams, but it really should be Device.
1228 kes Add disk-changer to scripts directory + configure/Makefile
1229 kes Eliminate PoolId from jcr -kes it is in jcr->jr.PoolId
1230 kes Implement store_bit scanner to replace store_yesno. Mostly done.
1231 kes Implement new store_bool that stores in a bool.
1232 kes Add true/false to yes/no conf directives.
1233 kes Make first cut at changing appropriate store_yesno to store_bool.
1234 kes Complete implementation of Pool storage devices.
1235 kes Move starting clones to job.c
1236 kes Move create_restore_bootstrap_file() to job.c
1237 kes Make copy_storage() more general to be able to handle
1239 kes Cleanup a lot of migration code for manual running, including
1241 kes Move getting a scratch Volume into a subroutine.
1242 kes Make all places a Volume that is added to a pool to
1244 kes Fix bug in autochanger recycle code (improper edit 64 bit).
1245 kes Fix segfault in restore command when no value specified.
1246 kes Start adding code to handle multiple MediaTypes in restore.
1247 kes Eliminate race condition in getting Volume name for
1248 two drive autochanger.
1249 kes More debug code in autochanger.
1250 kes Add storage keyword to bootstrap file, add parsing.
1251 kes Move slot in bsr file into Volume record as there will be
1252 a different slot for each Volume.
1253 kes Create reserve.h
1255 kes Implement Pool storage overrides.
1257 kes Implement first cut of Migration.
1258 kes Implement mysql_use_result() from patch by Karl Hakimian.
1259 This reduces significantly the memory consumption during
1260 the restore tree building, and hence runs faster too.
1261 kes Implement StorageId patch supplied by user (reggie) in bug
1262 #536. This should permit Bacula to work correctly with two
1264 kes Implement Job listing variations suggested by a user.
1265 kes Move updating bootstrap code in backup.c to subroutine
1266 update_bootstrap_file().
1267 kes Add new job status elapsed time and bytes written user
1268 friendly job report output patch sent by John Kodis
1269 <kodis at comcast.ne>.
1270 kes Implement a storage list in Pools.
1271 kes Separate out setup_job() code from run_job().
1272 kes Get migration working -kes lots of changes in mac.c in both
1274 kes Apply patch from user (Eric Bollengier I think) that fixes a
1275 DIR crash when no arguments are supplied to a dot command.
1276 kes Fix typo (strcpy->strcmp) in ua_prune.c as reported by Martin.
1277 kes Fix command arg name->volume in label command of gnome-console.
1278 kes Fix SD acquire.c to release correct DCR by explicitly testing
1279 on the dcr address rather than trying to devine if it is a read
1280 or write dcr. This failed in error conditions when the device was
1284 kes Apply user supplied patch for more readable rate output
1286 kes Continue implementing migration.
1287 kes Implement support for removable filesystems in SD.
1288 kes Ensure that btraceback scripts can be read by anyone.
1289 kes Replace dvd-freespace and dvd-writepart by dvd-handler.
1290 kes Correct bug where canceling restore before the FD contacts
1291 the SD causes the drive to be left in read mode.
1292 kes Move ofline_or_rewind into DEVICE::close().
1293 kes Eliminate close_device.
1294 kes Convert several dev subroutines to methods (e.g. bsf,
1296 kes Eliminate force_close_device().
1297 kes Implement Device Type directive in Device resource that
1298 can have values File, Tape, Fifo, DVD, or Prog.
1299 kes Add has_cap() method to Device.
1302 kes Add patch from bug #527 to allow RedHat user to specify
1303 options/user/group for starting each daemon in
1304 /etc/sysconf/bacula.
1306 kes Add two new queries to query.sql provided by Arno. One
1307 list volumes known to the Storage device, and the other
1308 lists volumes possibly needing replacement (error, ...).
1310 kes Add periodic (every 24 hours) garbage collection of memory
1311 pool by releasing free buffers.
1313 kes Correct bug counting sized (for display only) in smartall.c
1314 kes Print FD mempool stats if debug > 0 rather than 5.
1316 kes Make db_lock() mutex error fail the job rather than abort
1317 Bacula. Canceling the job caused the mutex to fail.
1318 kes Correct bug in alist.c that re-allocated the list if the
1319 number of items goes to zero.
1320 kes Move the reservation system thread locking to the top level
1321 so that one job at a time tries all possible drives before
1323 kes Implement a reservation 'fail' message queue that is built
1324 and destroyed on each pass through the reservation system.
1325 These messages are displayed in a 'Jobs waiting to reserve
1326 a drive' list during a 'status storage='. Note, multiple
1327 messages will generally print for each JobId because they
1328 represent the different problems with either the same drive
1329 or different drives. If this output proves too confusing
1330 of voluminous, I will display it only when debug level 1
1331 or greater is enabled in the SD.
1333 kes Add enable/disable job=<job-name>. This command prevents
1334 the specified job from being scheduled. Even when disabled,
1335 the job can be manually started from the console.
1336 kes During 'update slots' clear all InChanger flags where the
1337 StorageId is zero (old Media records).
1339 Beta release 1.38.4:
1341 kes Fix autochanger code to strip leading spaces from returned
1342 slots number. Remove bc from chio-changer.
1343 kes Back port a bit of 1.39 crypto code to reduce diffs.
1344 kes Fix first call to autochanger that missed close()ing the
1345 drive. Put close() just before each run_program(). Fixes
1348 kes Add PoolId to Job record when updating it at job start time.
1350 kes Pull in more code from 1.39 so that there are fewer file
1351 differences (the new ua_dotcmds.c, base64.h, crypto.h
1352 hmac.c jcr.c (dird and lib) lib.h md5.h parse_conf.c
1353 util.c. Aside from ua_dotcmds.c these are mostly crypto
1355 kes Implement new method of walking the jcr chain. The
1356 incr/dec of the use_count is done within the walking
1357 routines. This should prevent a jcr from being freed
1358 from under the walk routines.
1363 kes Start implementing Verify list output.
1364 kes Move the suitable_drive flag to a better place to prevent
1365 premature termination of the reservation if all drives
1366 are busy -kes should fix Arno's diff/inc pool failures.
1368 kes Add mutex to single thread VSS code in Win32.
1370 kes Simplify code in askdir.c that waits for creating an appendable
1371 volume so that it can handle multiple returns from the wait
1373 kes Modify the wait code to permit multiple returns.
1374 kes Return a zero when 'autochanger drives' is called and
1375 it is not an autochanger.
1376 kes Make rewind_dev() a method taking a DCR as an argument.
1377 This permits closing and reopening the drive if the
1378 rewind fails as happens if the drive was loaded while the
1379 file descriptor was open. This refreshes the file descriptor.
1380 kes Remove the ST_OPENED flag and always rely on fd < 0 for knowing
1381 if the device is open or not. This should eliminate
1383 kes Return error if reserve cannot find at least one suitable device.
1384 kes Make wait_for_sysop() return correct state information.
1385 kes Fix Win32 state file problem. write was not using compat
1386 code. This should fix bug #500.
1388 kes Modify gui on command to set only GUI mode and not batch.
1389 kes Modify .messages command to always print messages regardless
1391 kes If GUI mode is on, suppress automatic printing of
1393 kes Delete old bnet packet code.
1394 kes Ignore new BNET_START_SELECT and BNET_END_SELECT signals in
1395 wx-console. -kes not implemented because bconsole must be updated.
1396 kes Modify restore command in wx-console to set gui on and to use
1397 only .messages instead of messages. Hopefully this fixes bug
1399 kes Fix seg fault in exit of acquire when canceling a job --
1400 reported by Wolfgang Denk
1401 kes Pull in latest reservation system changes from 1.38
1402 kes Make .messages command always print messages regardless
1403 of the automessages flag.
1405 kes Fix seg fault if user labels a drive directory bug #513
1406 kes Remove quotes around Version as it breaks things.
1408 kes Merge in Aleksandar Milivojevic's mods to the spec file.
1409 kes Apply sparse code fix for raw drives and fifos. Bug 506
1410 kes Thorsten fixed Unicode cd problem with wx-console bug 505.
1412 kes Correct reservation system to do a last ditch try
1413 for any mounted volume, then anyone anywhere.
1414 kes Add quotes around table Version because of
1415 error in MySQL 4.1.15 -kes bug report submitted.
1416 kes Correct some minor problems with btape in the fill
1418 kes Updates to ssh-tunnel from Joshua Kugler.
1419 kes Added a report.pl program from Jonas Bjorklund.
1420 kes Simplify the O_NONBLOCK open() code for tape drives,
1421 and always open nonblocking.
1422 kes Do not wait for open() if EIO returned (shouldn't happen).
1423 kes Eliminate 3 argument to tape open().
1424 kes Correct the slot # edited in the 3995 Bad autochanger unload
1426 kes With -S on bscan (show progress) do not divide by zero.
1428 kes Make cancel pthread_cond_signal() pthread_cond_broadcast().
1429 kes When dcr is freed, also broadcast dev->wait_next_vol signal.
1430 kes Remove unused code in wait_for_device.
1431 kes Make wait_for_device() always return after 60 seconds of wait.
1435 kes Add stubs for non-crypto build.
1437 kes Use localhost if no network configured
1439 kes Eliminated duplicate MaxVolBytes in cat update -kes bug 509.
1440 kes Remove debug print.
1441 kes Add bail_out in error during state file reading.
1443 kes Merge changes made to 1.38.3 into HEAD
1444 kes Add stubs for pygtk-console code
1445 kes Create Makefile.in for pygtk-console code
1447 kes Merge updates into 1.38 branch
1448 kes Update specs to include mysql4 define.
1449 kes Fix when attributes are sent, must be after binit().
1450 kes Stop read_record() if status not ok in second loop.
1451 kes Return rec->FileIndex in dcr->VolLastIndex for normal
1452 and partial records in read_record(). This allows bscan
1453 to get FileIndex at EOT correct.
1454 kes Fix butil.c to correctly set dcr -kes fixes seg fault in bls.
1456 kes Fix Win32 built to work with new crypto code.
1457 kes Apply patch supplied by user (slightly modified) to fix
1458 correct detection of holes in block devices and FIFOs.
1460 kes Apply patch supplied by user (slightly modified)
1461 to fix SD hang with multiple pools and bad client
1462 IP. Fixes bug # 508.
1464 kes Add nagios plugin to the examples directory. Submitted by
1466 kes Remove warning message about multiple saves of hardlinked files
1467 from find_one.c as it can generate too many warning messages.
1468 kes Modify most restore error messages to be queued so that they
1469 appear at the end of the job rather than mixted with the restore
1470 listing where they could be 'lost'.
1472 kes Reset timeout values before select() per patch from
1473 Frank Sweetser for problems with non-blocking sockets.
1474 kes Unlink the state file if either reading or writing it gets
1475 errors. Hopefully this will fix Win32 exit problems.
1476 kes Add sanity check in append.c to ensure that dcr is not NULL.
1477 This can happen if multiple drive autochanger SCSI control
1478 channel and drive indicies do not correspond.
1480 kes Get next volume from Scratch pool before creating a volume.
1481 kes Set new Pool defaults in Vol when moved from Scratch Pool.
1482 kes Remove argument from create_bacula_database for SQLite as it
1484 kes Add back index code so that two drive autochangers can get
1486 kes Change a bunch of debug levels to aid debugging autochangers.
1487 kes Fix reservation so that mutexes are properly applied.
1488 kes Rework reservation algorithm so that two drives can be used
1491 kes Landon merged his data encription changes into the HEAD
1492 kes Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
1493 If this patch is applied, the number of days can be specified with
1494 'list nextvol days=xx'
1496 'status dir days=xx'
1497 My use case is to be able to preview the next scheduled job (and the
1498 next tape to be used) on fridays if there are no scheduled jobs during
1502 kes Fix font code in gnome2 console user patch. Fixes bug #501.
1503 kes Fix malformatted bnet error message that caused seg fault
1505 kes Applied user patch to improve README.vc8 in src/win32.
1507 kes Add Migrate, Copy, Archive Job types (some where there)
1508 kes Correct some more editing of JobId's (for 64 bit compatibility).
1509 kes Ensure that StorageId is stored in Media record when ever possible.
1510 kes Add Migration Job to Job.
1511 kes Add Migration Time, Migration High Bytes, Migration Low Bytes
1512 Next Pool to Pool resource.
1513 kes Add more code to mac.c (migration archive copy).
1514 kes Change Start Storage daemon job to require read and write storage
1516 kes Pass read storage data to SD as well as write storage data.
1517 kes Remove old code from winservice.cpp
1518 kes Break on error in scan.
1519 kes Fix typo in signal.c
1520 kes Separate read/write DCR in SD. Add jcr->read_dcr.
1521 kes Cleanup how find_device() works.
1522 kes Add read output to Status in SD.
1525 kes Add red-black btree routines
1527 kes Remove abs() in bfile.c so that it compiles on Solaris.
1530 kes Fix crash in tray-monitor when daemon disconnects. Bug #479.
1531 kes Fix bnet-server bug found on OpenBSD. Bug #486
1532 kes Fix cancel failure bug. Bug #481
1533 kes Fix failure when Pool name has spaces. Bug #487
1534 kes Fix SD crash in autochanger code. Mutex failure. Bug #488
1535 kes Fix a couple of free()s in src/filed/acl.c
1536 kes Fix memory overrun in bfile.c in building OS X resource
1537 fork filename. Bug #489
1538 kes Add Pool name to SD status output.
1540 kes Apply SunOS patch for ACLs submitted by David Duchscher.
1541 kes Make sure to set storage before trying to set drive.
1542 kes Add bacula_mail_summary.sh to examples directory. It makes
1543 a single email summary of any number of jobs. Submitted
1545 kes Make sure when we do a mount to unblock the device even
1546 if the drive could not be opened.
1548 kes Remove the USE_WIN32STREAMEXTRACTION #defines (always on)
1549 and correct a few minor problems to make it build on Linux.
1551 kes Remove delete of CVS from all Makefiles
1552 kes Fix seg fault when clicking on Add button in wx-console
1553 restore panel. Bug #470.
1554 kes Fix copyright date and URL typo -kes bug #468.
1555 kes Change autostart install for FreeBSD to look for rc.conf
1556 rather than rc.local as suggested fix for bug #466.
1557 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1558 grant on status. Bug #465
1559 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1560 update script. Bug #464
1561 kes Tweak #ifdefing a bit in new Win32 stream code.
1562 kes Fix #ifdeffing for FD_NO_SEND_TEST.
1563 kes Add documentation of performance #defines