1 Technical notes on version 1.39
5 kes Put attach_dcr_to_dev in a subroutine.
6 kes Make attaching/detaching to/from a device use a flag and
7 only detach if actually attached.
8 kes Add dvd-simulator.in to scripts directory and add to configure.
9 kes Fix code in acquire.c that checks fd != 0 to use dev->is_open().
10 This could be a cause of a number of drive reservation problems.
11 Note, this code is now in attach_dcr_to_dev().
12 kes Suppress doing Volume updates if it is a system job. This should
13 prevent the DVD label blocking.
14 kes Clear the freespace ok flag in a couple of strategic places.
16 kes Put removing zero sized spool part file in subroutine and
17 call from release_device().
18 kes Add Richard's patch for relabel to dircmd.c, but save and restore
20 kes Rework a lot of subroutines in dev.c to take dcr as an
21 argument. This is done to eliminate the usage of attached_dcrs
23 kes Change truncated_dvd to blank_dvd, which seems more suitable.
24 kes Apply most of Richard Mortimer's truncate patch.
25 kes Create lseek() method for DEVICE that takes dcr as an
26 argument. This is to eliminate the use of attached_dcrs in
27 lseek(). The calls to lseek_dev() must still be changed.
29 kes Apply Richard Mortimer's patches for printing an error
30 message in btape when a DVD is used, and to initialize traceback.
31 kes Added error message to btape when trying to access a file.
32 kes Move prototype of update_slots() to protos.h.
34 kes Add JobErrors, JobFiles, SDJobFiles, SDJobErrors, SDJobStatus,
35 and FDJobStatus to the Director Python variables.
36 kes Make sure valid argument passed to str_to_utime() where Arno
38 kes Apply Richard Mortimer's patch for bcopy, bextract, and bscan.
39 I.e. part of two different patches.
41 kes Modify disk changer to simulate some of the error conditions
43 kes Make sure the close() call in the SD tools is just before the
45 kes Implement dir_get_volume_info() in bls using the patch from
46 Richard Mortimer but call find_num_dvd_parts().
47 kes Implement find_num_dvd_parts() that mounts and scans a DVD
49 kes Move the omode code in open_dvd() up so that the cannot
50 write on blank disk can check can be bypassed for read mode.
53 kes Disable normal data spooling for DVD writing which uses
54 a different spooling mechanism.
55 kes Apply patch from Richard Mortimer to ensure that the number
56 of DVD parts is correctly updated.
58 Version 1.39.22 beta released:
60 kes Fix logic error in handling error return from mtx-changer
62 kes Make status from SD aware of -1 (unknown) Slot status.
63 kes At Eric's suggestion make both the "slots" and "drive" commands
64 to the Storage daemon work even if the drive is busy.
65 kes Make two separate Win32 menu links for starting bconsole and
66 wx-console in winbacula.nsi
67 kes Apply DVD part_spooled patch from Richard Mortimer
69 kes Put installer/Readme.txt into Win32 EOL format for Notebook.
70 rbn Fixed problems migrating settings from previous releases in
71 Win32 installer. Add Readme.txt with an option to show it on
72 the installer Finish page.
74 kes Use get_catalog_resource() to open catalog database
75 to ensure that ACLs are respected and that user is
76 correctly prompted for database.
77 kes Integrate multiple console/director patch from
78 Carsten Paeth calle@calle.in-berlin.de
79 ebl Add character substitution in Job/JobDefs WriteBootStrap.
80 You can use now 'WriteBootStrap = "/path/%c_%n.bsr"'
81 kes Apply patch supplied in bug #656 to pass priority field
82 in the run dialog to the Director in gnome console
83 kes Restore DCR after VOL_NAME_ERROR in mount.c. Hopefully
84 this will fix bug #627 where Bacula eventually gets
85 confused about what Volume it wants.
86 kes Add a new close_part() class in the SD to save the device
87 state around open/close_part/open for DVD writing. This
88 should fix the num_dvd_parts getting zeroed as reported by
90 kes Apply patch from Richard Mortimer that correct edit code
91 for debug output of st_size.
92 ebl Add support of encrypted data stream to bscan.
93 display data_len instead of data content (may be binary)
95 kes Add dev->close() in dir_ask_sysop_to_mount_volume() in
96 bcopy. Fixes bug #669 reported by Eric.
97 kes Fix incorrect number of arguments in SQL statement in
98 sql_get.c as reported by Eric.
100 kes Update examples directory.
101 kes Remove unused variable in winservice.cpp
102 kes Make Win32 make command build installer.
104 kes Correct dvd code that breaks tape labeling.
105 kes Implement Enabled on update slots.
107 kes When doing a label, pass the VolBytes back to the Director,
108 which puts it in the catalog.
109 kes Print an error message if the user attempts to prune an
111 kes Need to start using %ld when sscanfing 32 bit values.
113 kes Correct the counting of VolCatBytes for DVDs.
114 kes Add code to mount.c to require that VolCatBytes corresponds to
115 what is actually found when doing an append.
116 kes Update freespace only after writing on the DVD.
117 kes Remove code that blows away the current part in the spool file.
119 kes Apply new dvd-handler patch from Richard Mortimer.
120 kes Tweak so that debug level 20 shows only DVD commands.
121 kes Correct spooled_part flag in dev.c close() so that it is cleared
122 when the spool file is deleted or does not exist.
123 kes Print part number in read_records when eof hit (restore).
125 -es Make find with no args in tree restore return error rather than
126 stopping the selection. Fixes bug #665
127 kes Rework DVD writing to ensure that the last part is written
128 on open_next_part when dealing with a spool file.
129 kes Correct the lseek_dev() routine to handle end point correctly
130 (bug introduced by me).
131 kes Allow part number to exceed num_dvd_parts in lseek_dev().
133 kes Apply dvd-handler patch from Richard Mortimer.
134 kes Apply dvd error check patch from Richard Mortimer.
135 kes Apply bpipe race patch from Richard Mortimer.
136 kes Rework how DVD labels are handled and set append only
137 when part > num_dvd_parts.
139 kes Rework many features of DVD writing and reading. Added many error
140 messages. Most importantly changed part to represent the current
141 part number base zero. This makes current DVD writing incompatible
142 with previous version.
144 kes Add host:port to connect failure messages to FD and SD from Dir.
145 kes Add WhereACL to console ACL list. If nothing is specified, only
146 the default is permitted for restore. Otherwise, *all* allows any
147 path, or you can specify permitted paths. This should allow control
148 over where users can restore files. This is untested.
149 kes Modified message to add a ? (as in loaded?) when querying the autochanger
150 for what Slot is loaded.
151 kes Fixed the use of Slot, so that is more correctly maintained, thus
152 eliminating unneeded duplicate calls to determine what Slot is loaded.
154 kes Install man pages with 'make install'
155 kes wx-console crashes because of differences between Bacula and wxWidgets
156 malloc()/free(). Tweak wx-console to use bmalloc()/bfree() for Bacula
158 kes correct improper indenting in wx-console/console_conf.c
159 kes update wx-console header copyrights
160 kes Fix bug #658 where wx-console mangles file/directory names containing
163 kes Add Media.Enabled flag to client backups for dotcmds.c
164 kes Enforce Media.Enabled=1 for a current restore to work.
165 kes Require restore case 3 to have sqlquery permission to work.
166 kes Remove obsolete del_MAC sql command.
167 kes Ensure that bscan creates Volumes with Enabled=1.
169 Version 1.39.20 beta released:
171 kes Correct missing Client table reference in SQL pointed out by
174 kes Fix Win32 build (new entrypoint, start baculafd).
176 kes Add -n option to bconsole to turn off conio.
177 kes Print JobIds to be migrated in Job Report.
178 kes Add additional user supplied notes to the messages part of
179 bacula-dir.conf concerning multiple email addresses.
180 kes Fix an incorrect comment pointed out by a user in dvd_handler.in
181 kes Add more recent Feature requests to Projects file.
183 kes Apply Maritn's fix to src/win32/Makefile.
184 kes Apply Martin's fix to configure.in for pthreads on FreeBSD 4.x
185 kes Implement pruning for Migration and migrated jobs.
186 kes Implement PoolOccupancy migration.
187 kes Implement PoolTime migration.
189 kes If doing a mount, look for a slot, and if specified pass it to
190 the SD so that it can load the autochanger.
191 kes Return DVD=1 flag if a label command is done to a DVD. This
192 permits setting VolParts to 1.
193 kes Apply DVD patch from Richard Mortimer <richm@oldelvet.org.uk>, but
194 rework ua_label code based on DVD media type to use DVD flag returned.
196 kes Eliminate some compile warnings in dird_conf.c
197 kes Format the bytes field in the terminated jobs part of the status
198 command for the three daemons with suffixes to reduce print size
199 of backup bytes. Suggested by a user.
200 kes When not descending into a directory, print the File= name that
201 triggered it -- makes why not descending a bit clearer.
202 kes Do not unload autochanger when doing a list command -- basic code
203 from Eric Bollengier.
205 kes Fix bug #462 incorrect error message printed when client script called
206 from File= was not found.
207 kes Fix bug #558 (waiting for feedback) where Bacula needs too much time to
208 do a rewind on Solaris when no tape is in the drive (Solaris does not
209 have the detailed errno found on Linux). Added Solaris specific code.
210 Note, this may apply to other OSes as well.
212 kes Defined BUILDING_CATS in src/cats/cats.h so that *nix builds.
213 dsb Updated rpm spec for 1.39 - updatedb 9 to 10, add new man pages,
214 fix bug 648 - update sqlite script patches, lock out gnome2console
215 builds for platforms with gtk+ < 2.4.
216 Updated build_rpm.sh - add remote source directory, add switch for
217 signing, refine file names.
218 Updated spec file again for Mandriva build as they have this curious
219 custom of silently converting all manpages to bzip2 format just before
220 the final packaging step.
222 rbn Fixed the Windows Makefiles so that they won't accidentally try and
223 pickup binaries for the Unix build. This allows both the Unix
224 build and the Windows build to be built in the same tree without
225 interfering with each other.
226 rbn Fixed error handling and cleaned up mtx-changer.cmd.
227 rbn Added the rest of the database scripts. These are installed but are
228 not yet edited for variable replacement.
229 rbn Broke out the cats functionality from bacula.dll and put into new
230 separate dlls for each database type. At installation time the
231 correct one is copied to bacula_cats.dll.
232 rbn Eliminate the need to install the mysql.dll on client only builds.
233 rbn Moved dird/sql_cmds.c into the cats directory so all the database
234 specific #ifdefs were in the cats directory.
235 rbn Added a new sql_cmds.h with all the declarations for the variables
236 exported from sql_cmds.c.
237 rbn Moved catalog_db[] from lib/message.c to a new routine db_get_type()
238 which is implemented in bdb.c, mysql.c, postgresql.c and sqlite.c in
240 kes Correct improperly formatted list command output reported by Dan.
242 kes Correct despool time calculation.
244 kes Remove previous changes to compat.cpp as they create problems.
245 kes Use old style MD5 for FileSets to avoid Full saves on every Job.
246 kes Attempt to fix problems with the msg_queue crashing on Solaris
247 when Bacula is terminating, but problems remain.
248 kes Add WIN32_VSS to HAVES in src/Makefile.inc.in to correct VSS
249 name editing problems with too many \\?\es.
250 kes Fix some Bacula source code style problems in compat.cpp.
251 kes Add debug code to compat.cpp and convert non-Bacula debug code
254 kes Change the name of the technical notes file from kes-1.39 to
255 technotes-1.39. Prefix my messages with 'kes '.
256 kes Allow dequeue_messages() to be called twice. Should fix bug
258 kes Add Job type to bscan Job information output.
260 kes Update copyright date in program files, and for the most part
262 kes Implement %q in bsnprintf.c apparently I forgot it.
264 kes Make disk-changer sed command compatible with FreeBSD.
265 kes Make a first cut at a ReleaseNotes and ChangeLog for a
267 kes Make make clean descend into the src/win32 directory.
268 kes Fix some #ifdefing so that Solaris and FreeBSD compile
269 sys/stat.h was turned off.
270 kes Use suffix editing for new transfer rate messages.
271 kes Attempt to come up with a workaround which seems to be an OS
272 bug where write() returns EBUSY. IMO this should not happen.
273 It triggered in truncatebug test. The workaround retries using
275 kes Eliminate a strerror() call in a class method that failed with
277 kes Use rm -rf rather than rmdir to delete the src/win32/release
278 directory during make clean.
280 kes Make bscan ignore ACL streams.
281 kes Update projects files with new Feature Requests.
282 kes Generate current English and French manuals and upload
284 kes Update the home page to include the new British/French flags to
285 switch between translations. Work done by Alexandre Baron.
286 kes Make disk-changer script print an error message if the changer
287 directory is not defined.
288 kes Create a generic DB routine for getting an int (32/64 bit) from
290 kes Add more migration code.
291 kes Add a few more files to .cvsignore here and there.
292 kes Minor fixes for SD write rate and despooling rate.
293 kes Turn off new test code in src/console.c
297 kes Incremented the version number to signify that all of Robert's code
298 for Win32 that was in the branch is now integrated into the HEAD,
299 and that Eric has submitted code that we hope will provide limited
300 backward compatibility with 1.38 file daemons (more testing to be
302 kes I rationalized a few of the names of the variables (mainly jcr names)
303 that are used during migration as keeping three different jcrs at the
304 same time clear in ones head is not easy.
308 eb Tweak new runscript feature to work with 1.38.x FDs.
309 eb Correct crypto.c to fix segfault when restoring an encrypted stream
310 on fd which don't use rsa keys.
311 eb Add yes/no English keywords on localized yes/no questions.
313 kes Several important commits from Robert Nelson for code cleanup and
315 kes Modify console.c so that when conio is enabled, it converts \n to
316 \n\r before outputting to the console. Hopefully this will fix
317 the problems with expect in Perl that Eric saw.
319 kes Change cats/sql.c to eliminate %-*s format, which I think is turned
321 kes Add Comment field to llist of a volume.
322 kes Allow true/false in some yes/no questions.
323 kes Implement update volume enable=(on|off|true|false|archived|0|1|2)
324 kes Remove a few /n's when scanning commands from another daemon. This
325 permits adding additional fields later.
326 kes Modify dbcheck to handle ctl-d and to delete Log table entries.
327 kes Update README.mingw
329 kes Tweak authentication to work with 1.38.x FDs.
330 kes Tweak catalog make scripts.
331 kes Fix catalog upgrade scripts so that they work.
332 kes Correct despooling debug code to eliminate race condition.
334 kes Add additional fields as specified by Arno to LocationLog.
335 kes Add comment field to the Media record.
336 kes Add Time field to the Log record.
337 kes Correct migration SQL (thanks to Bill Moran) so that it
338 runs with PostgreSQL also.
339 kes Add spooling/despooling info in status output of SD.
341 kes Spend a lot of time integrating mkcdrec with the rescue disk.
342 kes Add VOLMGMT message class for volume management messages (none yet).
343 kes Add CATALOG as a destination. It goes into the LOG table.
344 kes Implement the Log table in the DB.
345 kes Implement the Location Log table in the DB (for user use).
346 kes At Eric's request add a run_scripts() just after blast_data in
349 kes Add Enabled column to Location, correct some typos in DB schemas.
350 kes Correct bug I introduced into RunScripts enum.
351 kes Add log table to Catalog
352 kes Purge original job migrated if the migration terminates normally.
353 kes Cleanup purging of files/jobs so that it is done only in a
355 kes Add new VOLMGMT message class.
356 kes Add Catalog message destination (user conf code remains to be written).
358 kes Modify read_record and friends to properly deal with migration
360 kes Update debug code in read_record.
362 ======================= Warning ==========================
363 Separate read and write storage in Jobs in the Director. This
364 is a major rewrite of some of the low level code and hence has
365 a high probability of introducing bugs.
366 ==========================================================
368 kes Move the job init code up to *before* the job is put into
369 the job queue (resource allocation queue). This permits the
370 job to establish whether it will read or write or do both.
371 kes Add name() methods to all the resource classes.
372 kes Implement separate read and write storage resource
373 allocation/deallocation in jobq.c
375 ======================= Warning ==========================
376 Implemented new method of getting the default Storage from the Media
377 record rather than from the MediaType for restore. As a fall
378 back, if no Storage is defined, use the MediaType. This
379 eliminates most all prompts if there are multiple MediaTypes
380 used. This is an important and fundamental change.
381 ==========================================================
383 kes Add more detail (Storage, Device) to list of volumes printed
385 kes More code in migrate. In particular start multiple jobs if
387 kes Probably overkill, but ensure that the bsr is unique even within a
389 kes Rework bsys.c drop() so that it now should work as expected.
390 kes Update a bunch of old copyrights -kes particularly in .h files.
391 kes Remove src/lib/bshm.c/h
395 ======================= Warning ==========================
396 All hash codes in the database are now kept in world
397 compatible base64 format (no = filling). This means that
398 all FileSets will be updated and if you are running
399 verify jobs, you must do an InitCatalog.
400 Authentication uses the new algorithm, but should be
401 backward compatible with 1.38.x
402 ===========================================================
404 kes Modify the authentication routines so that the 1.39.15 Director
405 always runs with the compatible binary to base64 code (same as
406 the rest of the world). It will however detect if an SD or
407 FD is running the old code and if that is the case, will use
408 the old algorithm for authentication. However, all consoles must
409 use the compatible algorithm, and all data entered into the database
410 (all hash signatures, MD5, SHA1, ..., and all FileSet hashes) will
411 use the compatible algorithm.
412 kes Rename the cram_md5 routine names to be slightly more appropriate
413 to what they are doing (challenge and respond).
414 kes Robert committed his #ifdef and header cleanup.
416 kes Fix a compiler warning in files/backup.c
417 kes Cleanup NOT NULL vs DEFAULT 0 in database creation.
419 kes Robert committed his low impact changes.
420 kes I removed a size_t from the jcr.h definition.
421 kes Update the tape regression scripts (still to be tested).
422 kes Add gcc and gcc-c++ requires to srm as suggested by a user.
423 kes Require done or quit to exit from in memory tree restore.
425 kes Write install/uninstall of new manpages. There are now a
426 pile of man pages. Some of which need a lot of work.
428 ======================= Warning ==========================
429 The --mandir ./configure option now points to the top level
430 man directory. The man files will be installed under
431 mandir/man8 and mandir/man1 as appropriate.
432 ==========================================================
434 kes Add complete text of GPL to LICENSE.
435 kes Implement job report that indicates where Storage and Pool
436 came from -kes with overrides and Pool storage and NextPool,
437 it is all very complicated.
438 kes Create a few common subroutines for backup.c and migrate.c
439 kes Eliminate warning messages from tray-monitor.c
441 kes Apply fix for scheduler for missing unlock_jobs().
442 kes Clean out autoconf caches before rebuilding configure
443 kes Fix the FreeBSD pthreads lib define updated by Dan.
444 kes Add missing semicolon in src/console/console.c
445 kes Add Robert's enhanced version of build-win32-cross-tools
446 as well as his patch file.
447 kes Note, the new gcc options are likely to break building of
448 wx-console or the tray-monitor ...
450 kes Implement Robert's suggestion to suppress printing compile lines.
451 kes Detect GCC correctly (I hope)
452 kes If using GCC (actually g++) add the following compiler flags
453 -fno-strict-aliasing -fno-exceptions -fno-rtti
455 ===================== Warning =============================
456 Turn on new bsnprintf() code. This could cause print output
458 ===========================================================
460 kes Fix crypto when not using openssl. I previously overlooked this.
461 kes Eliminate crypto type punning problems by eliminating void * and
462 using uint8_t * instead.
463 kes Harden authentication failure in FD by single threading errors
464 and forcing a 6 second wait.
466 ===================== Warning =============================
467 Removed "Accept Any Volume" directive.
468 ===========================================================
470 kes Major cleanup and simplification of regress using shell functions
471 (more tests to be converted to new format)
472 kes Add detection of 64 bit Irix as indicated by user.
473 kes Increment catalog database id from 9 to 10.
474 kes Add a few of the new database fields to the various C++
476 kes Implement code to fill in the most important new fields (e.g.
478 kes Ensure that most of the new fields are in create/get/insert/update.
479 More work to be done.
481 kes Update some very old licenses in src/cats.
482 kes Modify the database format for handling Migration jobs:
483 Add PriorJobId, RealEndTime to Job table
485 Remove Stripe from JobMedia record (not used, wasting space)
486 Add ScratchPoolId, RecyclePoolId, Enabled to Media record
487 Add Cost to Location table.
488 kes Delete mac_record subroutines.
489 kes Add new table values to create/update/get routines as appropriate.
490 kes Update the update_tables and make_tables scripts.
491 kes Make a first cut in using a union where multiple pointers (actually
492 pointers to pointers) are stored.
493 kes Make some changes to base64.c suggested by Robert and others and add
494 a small amount of documentation.
495 kes Add some changes suggested by Peter for Solaris (bregex...)
496 kes Make runscript.h always built because it needs to be pulled into
497 more places. In particular its RES was left out of a union.
498 kes Renumber the enum{} list in runscript.h to avoid starting from zero.
499 This makes it slightly easier to detect uninitialized variables.
501 kes Remove xpg4 lib from FreeBSD build as it is no longer needed and
502 sometimes creates install problems.
503 kes Change a couple of %T in strftime to %H:%M:%S as seen in Robert
504 Nelson's code. More to do.
505 kes Convert a few store_bit to store_bool in filed_conf.c.
506 kes DVD tweak to block.c as supplied by Uwe Muessel.
508 kes Modify configure.in to check for typeof().
509 kes In findlib/attribs.c use typeof instead of templates if possible.
511 kes Implement partial error messages for src/filed/acl.c
512 kes Fix return code to fail when doing update barcodes and
513 Pool resource is not found. This previously caused Volumes
514 to be labeled as cleaning tapes.
515 kes Small updates to projects.
517 kes Add Eric Bollengier patch for new RunScript directive. It breaks
518 compatibility between dird and fd.
520 kes Prevent DVD code from rewriting label if the device cannot be
522 kes Used __GNUC__ to detect GNU g++ as suggested by John Goerzen to
523 fix Debian build bug.
524 kes Fix Dir/SD run race in migrate.c, verify.c, and restore.c
525 kes Integrate manpages contributed by Jose Luis.
526 kes Update projects file.
527 kes Add manpages Makefile.in to configure.in
528 kes Remove installation of bacula.8 in scripts directory.
530 kes Implement patch submitted by cesarb in bug #606 to implement O_NOATIME
532 O_NOATIME is a open() flag which makes it possible to read a file without
533 updating the inode atime (and also without the inode ctime update which
534 happens if you try to set the atime back to its previous value). It also
535 prevents a race condition when two programs are reading the same file, but
536 only one does not want to change the atime. It's most useful for backup
537 programs and file integrity checkers (and bacula can fit on both
540 Recent versions of the Linux kernel and glibc have support for it (the
541 glibc support being mostly copying the O_NOATIME definition to
542 bits/fcntl.h). If there's no support for it on the kernel, trying to use
543 it does nothing (since the kernel ignores unknown flags).
545 If the kernel has support for it, trying to use it either works, fails
546 silently (mostly in remote filesystems), or returns errno=EPERM (if you
547 are not either the owner of the file or root). A simple way to prevent the
548 failure is to open the file without the flag and set it later with
549 fcntl(F_SETFL), ignoring any EPERM errors.
550 kes Applied patch posted by Jaime Ventura to bug #570 to correct failure
551 of restarted jobs to complete (due to a destroyed pthreads conditional
552 variable used by the message thread).
553 kes Fixed bug #619 where Bacula would not restart jobs with MaxRestartTimes
555 kes Apply patch from John Goerzen bug #611 to fix bad manual links in the code.
556 kes Apply patch from Rudolf Cejka bug #614 to removed trailing
557 colons in query.sql file.
558 kes Apply patch from Rudolf Cejka bug #613 to correct prunning of files
559 not to create orphans.
560 kes Apply patch from Rudolf Cejka bug #617 to use mtime instead of ctime
561 in restore long listing.
562 kes Apply patch from Rudolf Cejka bug #609 to use MarkId in verify.c instead
563 of incorrect MarkedId.
564 kes Apply patch from adioso bug #616 to correct text in manual (replace
565 Director with File daemon).
566 kes Rework a few of the zlib changes so that they build properly.
569 kes Move DIR "run" command to SD before starting the message thread
570 as suggested by Cristopher Hull to avoid a race deadlock from
571 two threads using the bsock structure.
572 kes Modify LICENSE to correct some problems pointed out by Debian.
574 kes Correct EOF with no \n lex.c problem.
575 kes Tweak compat.h compat.cpp and merge with apcupsd
576 kes Add additional INFO messages if autochanger cannot be used.
579 kes Simplify Win32 Makefile
580 kes Correct count of buffers/bytes used by smartall.c
581 kes Updated compat.h after porting apcupsd to MinGW.
583 kes Work on getting wx-console building on MinGW. wxWidgets now builds
584 started adding Makefile ...
585 kes Moved MinGW library objects to src/win32/lib to reduce clutter.
587 kes Reloading a bad configuration file doesn't kill director any more.
588 Thanks to fix from Eric Bollengier.
590 kes Fix problem of accents with new Win32 code.
591 kes Integrate Howard's VSS patch. Tweak it a bit. VSS now
592 works in the MinGW build with the exception that there
593 is a problem with accented characters -kes i.e. there is
594 some mapping problem with wide characters.
595 kes The code no longer compiles with Microsoft VC++.
597 kes Start implementing Christopher's St.Bernard code.
598 kes Add Christopher's mods for opening files.
599 kes Strip \r \n from Win32 error messages (Christopher)
600 kes Add more info about Win32 system if unknown (Christopher)
601 kes Use bstrn(cpy, cat) routines to avoid overrun in compat.cpp
602 kes Fix a number of incorrect strings marked for translation, when
603 they should not be (e.g. commands).
604 kes Fix StartTime bug reported for ClientRunBeforeJob and RunBeforeJob
605 Patches supplied by user in bugs #608 and #599.
606 kes Use most recent of st_ctime and st_mtime in restore tree DIR
607 listing. This fixes some problems with Win32 printing incorrect
609 kes Correct the clock shift comm time calculation between the DIR
610 and the FD. It was added rather than subtracted.
611 kes Strip all backslashes in filenames to be restored on Win32
612 machines -kes the names should all be in Unix format, and if
613 there are any backslashes it is most likely due to an improper
614 FileSet definition, and the files will not otherwise be
616 kes Remove lib/regex.c (replaced by bregex.c).
617 kes Delete src/win32/License.txt
618 kes Modify installer to install LICENSE
620 kes Fix bug in build-win32-cross-tools script reported by Howard
621 kes Implement cross compiled bconsole
623 kes Fix barcode test, eliminate BOOL (doesn't exist on Linux).
624 kes Write first cut of README.mingw32
625 kes Add back ua_label barcode fix from Rufolf Cejka.
626 kes Integrate the majority of the Mingw cross-tools submission
627 made by Howard Thomson. Everything compiles, with zlib, openssl,
628 and VSS turned off. Linking needs a pthreads library ...
630 kes Add 'Dir Status' button to the gnome console.
631 kes More work on migration.
632 kes Restore non-compatible base64 coding to permit compatibility.
633 kes Display heap stats in Storage daemon without debug level.
635 kes Integrate most of the MinGW changes -kes more to do.
637 kes Implement using pg_config for finding PostgreSQL files.
638 Fixes bug #600. Patch supplied by user.
639 kes Remove -t option from mktemp in mtx_changer.in and use
640 working directory. Fixes bug #578.
641 kes Update job start time after the any run before job so that
642 files created by the script are only backed up once. Fixes
644 kes Strip trailing newline only from filenames entered in
645 the restore command when reading a file. This permits
646 the user to enter filenames with trailing spaces. Fixes
647 bug #549. The user supplied a patch that I modified slightly.
648 kes Use the most recent time (st_mtime, st_ctime) in the dir
649 command in restore. This gives the user a better idea of what
650 the newest file really is. This fixes bug #574. The fix
651 was suggested by the user.
652 kes Implement a compatible version of base64. This permits external
653 programs to duplicate Bacula's base64 algorithm using standard
654 routines. This fixes bugs #296, and 565. Patch submitted by
656 ================= Note ========================
657 Previous Signatures stored in the database are no longer
658 compatible with this. The main downside is for Verify jobs,
659 and doing an InitCatalog run will fix the problem. Also, the
660 authentication between the deamons is changed, so all daemons
661 must be simultaneously upgraded.
662 ==============================================
663 If you don't like this fix, set:
664 const bool compatible = true;
666 const bool compatible = false;
669 kes Ensure that DB signature is never NULL.
670 kes Ensure that DB table names are not translated.
671 kes Fix scheduler to handle time skew (eg daylight savings).
672 kes Fix scheduler to use lock_jobs() to avoid most problems
673 with reload. Window is now milliseconds.
675 kes Apply patch from Christopher Hull
676 kes Allow multiple connections to database with different
678 kes Invalidate the scheduler when doing a reload. Fixes seg
679 fault, but still 60 second window.
680 kes Additional info in Reschedule message.
681 kes Use set_jcr_job_status() everywhere to prevent loss of
683 kes Display peer IP in FD if error from connecting DIR.
684 kes Don't increment file count for DIRBEGIN.
685 kes Replace illegal characters in Win32 filename by _.
686 kes Add SE_CREATE_PERMANENT_NAME privilege in Win32.
687 kes Hash hard link filenames rather than linked list.
688 kes Fix for security failure in chdir on Win32.
689 kes Add CreateDirectoryA/W win32 API entry points.
690 kes Add /silent option to Win32 FD for Install/Remove service.
691 kes Always print Heap statistics in FD.
693 kes Remove the -f option from the chown in Makefile.in for more
695 kes Change setting the group in Makefile.in to use chgrp for
697 kes Implement a write_store and read_store to replace
698 dirstore in reserve.c
699 kes Implement a Bacula read/write lock for Python rather
700 than using the Python lock to avoid recursive problems.
701 kes Correct the uninstall directory names in filed/Makefile.in
702 as reported by a user.
704 kes Correct some problems with database creation (new tables).
705 kes Replace a bunch of old 0x%x by %p.
706 kes Get first cut of Migration with Job selection working.
708 kes Change store_bit() to store_bool() for the Spooling in
709 dird_conf.c -kes bug reported by Robert Nelson.
711 kes Correct Makefile bug found by Dan Langille.
713 kes Correct Makefile for Solaris /bin/sh
714 kes Correct mtx-changer.in for Solaris /bin/sh
715 kes Abort if a conf resource does not have a Name =
717 kes Change the name of the regex program to bregex.
718 kes Add the bwild program to the tools directory. It is similar
719 to the bregex program.
720 kes Implement create bregex.h and bregex.c in src/lib from the
721 Python regexp program.
722 kes Use the new bregex.c to implement Regex expressions on Win32.
724 kes More work on migration.
725 kes Implement wild program in tools directory for testing
726 wild-cards. Almost identical to the regex program.
727 kes Up port VSS single thread locking code.
728 kes Replace N_(..) by NT_(...) to inhibit translation of
730 kes Modify Makefile to change the permissions on Working Directory
731 to 770 if the directory is created.
732 kes Do not fail the Makefile if changing the permissions or
733 owner/group on WorkingDir fails.
734 kes Remove early selection of Scratch Volumes in the recycling
736 kes Correct the old recycling algorithm so that Scratch Volumes
737 are selected when looking for a Volume in the changer.
738 kes Correct a typo in the Verify SQL reported by Joe Park.
740 kes Remove automatic case folding on Windows FDs. You must
741 explictly use the 'Ignore Case = yes' option.
742 kes Remove the code added to 1.38.6 and 1.38.7 that pulls a
743 scratch volume in an Autochanger early in the 'recycling'
746 kes Make weof() and clrerror() methods of class DEVICE.
748 kes Tweak license to include Microsoft restrictions.
749 kes Move mysql.reconnect to after real_connect(). Thanks to
750 Frank Sweetser for the patch.
751 kes Disallow a backslash in a File = directive (Windows junk)
752 unless the string is quoted.
753 kes Apply Eric's patch to ua_label.c so that daemon protocol
755 kes Add NT_ definition for strings that should not be translated.
756 kes Apply NT_() to ua_label.c
757 kes Remove timed wait for VSS on Win2K3 as it is not yet
759 kes Correct bacula.in script to reference bacula-ctl-xx in the
760 sysconfig directory rather than the bin directory.
762 kes Fix a long standing bug in the bacula start/stop scripts.
763 kes Attempt to add the new bacula-ctl-* files to the rpm.
764 kes Switch to using typeof() for list traversing to avoid
765 as many FC5 g++ compiler warnings as possible.
767 kes Split the bacula start/start script into four files:
768 bacula -kes starts and stops calling other scripts
769 bacula-ctl-dir -kes starts/stops the director
770 bacula-ctl-fd -kes starts/stops the File daemon
771 bacula-ctl-sd -kes starts/stops the Storage daemon
773 kes Create datestyle fix for PostgreSQL. Fixes bug #574.
774 kes Correct editing of JobId from int to int64 in fd_cmds.c
775 kes Eliminate FileSet name race with bash_spaces() and multiple
776 threads by bashing in a local.
777 kes Fix error return from 'use storage' to print a correct error
778 message rather than nothing.
779 kes Correct false re-read last block error message when two jobs
780 are simultaneously writing at the end of a tape.
781 kes Simplify exit conditions in the reserve.c code to avoid
782 possible non-release of reservation_lock().
783 kes Suffle lock order in reserve to avoid deadlock between
784 reservation lock and device mutex.
786 kes Initialize jcr mutex before first use. Thanks to Thorsten for
787 tracking this down for me !!!! as it broke the Win32 build.
789 kes Integrate addition of line count limitation to bsmtp -l from
790 Sebastian Stark <stark at tuebingen.mpg.de>
792 kes Implement regex test program in tools directory.
793 kes Attempt to fix time problem with bsmtp with foreign langs.
794 kes Add strip_trailing_newline() submitted by user.
795 kes Implement regex matching in migrate.c
797 kes Fix bug #537 to allow arbitrary time to mount a volume for
798 restore, if polling is turned on.
799 kes If dir_user or dir-group is specified in ./configure apply it to
800 the working-dir. Fixes bug #533.
801 kes If rescheduling a job cancel the previous incarnation with the SD.
802 Fixes bugs #566 and 557.
803 kes Fix bug #567 do_message() definition type conflict.
806 kes Add more jcr methods and make mutex and use_count private.
807 kes Create lock/unlock methods for jcr.
808 kes Fix PostgreSQL bug doing sql_data_seeek() by explicitly reading
809 records to get to seek position.
810 kes Integrate patch from bug #561 to correct conio.c signal definitions.
811 kes Fix Rescheduling failed Jobs. Ensure that SD message thread
812 terminates correctly by doing pthread_kill(). Do not destroy
813 SD cond wait variable between executions of the job. Use local
814 mutex for cond variable to avoid blocking jcr chain. Fix poor
815 use of jcr use count in jobq.c for restarted jobs.
816 kes Fix obsolete usage of foreach_dlist() to use foreach_jcr() in
817 lib/jcr.c -kes prevents locking the jcr chaing.
818 kes Apply patch from bug #564, which corrects listing volumes with
819 multiple autochangers. Apply same fix to next volume list.
820 kes Fix bug #562 where restore bootstrap file is not unique.
821 kes More details in implementing David's migration syntax proposal.
822 kes Save and restore dcr when swapping drives so that if we have
823 a write dcr it is not lost.
824 kes Use new routine lock_reservations() to lock the reservations
825 system, and call it while looking for a volume in askdir.c.
826 This could possibly fix bug #543.
827 kes Stop SD command loop if job is canceled.
830 kes Remove old code from findlib/create_file.c
831 kes Rename mac.c migrate.c
832 kes Add user friendly display of VolBytes in job report.
833 kes Rename target... to previous... to make it a bit easier to
835 kes Add selection type and selection pattern to Migration (idea
836 given by David Boyes).
839 kes The po files should now be current.
840 kes Fix new sql_use_result() code to properly release the
841 buffers in all cases.
842 kes Use the keyword ujobid to mean the unique job id; job or jobname
843 to mean the Job name given on the Name directive, and jobid to
844 be the numeric (non-unique) job id.
845 kes Allow listing by any of the above.
846 kes Add the user friendly job report code for reporting job elapsed time
847 and rates with suffexes from John Kodis <kodis at comcast.net>.
848 kes Add Priority and JobLevel as Python settable items.
849 kes Use TEMPORARY table creation where the table is created by
851 kes Add new code submitted by Eric for waiting on specific jobid.
852 kes Add ACL checking for the dot commands.
853 kes Fix restore of writable FIFOs.
854 kes Fix a bug in bpipe where the string was freed too early.
856 kes Modify the Python class examples to inherit object -kes new way
857 of defining classes. Patch from Felix Schwarz.
858 kes Implement jobuid to replace old usage of job in keywords as
859 suggested by Eric Bollengier.
860 kes Apply patch for enhancing wait from Eric Bollengier. On can now:
861 wait (wait for all jobs to stop)
863 wait jobuid=unique id
865 kes Implement write variables for Python to set Priority (anytime), and
866 Job Level, only during JobInit event.
868 kes Fix the block listing bug pointed out by Arno.
869 kes Update the po files at Eric's request.
871 kes Fix Maximum Changer Wait, Maximum Open Wait, Maximum Rewind Wait to
872 accept time qualifiers.
873 kes Make catalog respect ACL.
874 kes Add recycle count to Media record.
876 Changes to 1.39.6-beta1 24Feb04
878 kes Add Rudolf Cejka's new rc-chio-changer.
879 kes Implement pulling Volume from Scratch Pool if the
880 Volume is in the autochanger.
881 kes Implement additional command arguments for update Volume.
885 kes Back port changes to 1.38.5
886 kes Fix recycle SQL for StorageId.
887 kes Fix misplaced quote in mtx-changer script.
889 kes Note. Your database must be updated, or you must create
890 a new database. I have not yet incremented the database level.
891 kes Add Location table.
892 kes Add LocationId, DeviceId, and MediaTypeId to Media record.
894 kes Implement create/get mac record in database for adding extended
895 Migration data to the job record.
896 kes Add new MAC table to update/make database scripts.
897 kes Return Storage name used when getting VolumeNames for a job.
898 kes Change bsr file keyword Storage to Device, which is more accurate.
899 kes Ensure that Mac records are pruned/purged.
900 kes Tweak SD tools to deal with changing media type.
901 kes Integrate more dev.c subroutines as methods (e.g. strerror, bsr, ...)
902 kes Pass pointer to dcr pointer to acquire_device_for_read() so
903 that the subroutine can switch devices, and hence dcrs.
904 kes Modify the multiple MediaType read code to re-use the same
905 dcr when switching devices. This makes the code much more
907 kes Integrate patch from Karl Hakimian that reads JobIds, FileIndexes
908 from a table for restore.
909 kes Add Storage name to VolParams, but it really should be Device.
911 kes Add disk-changer to scripts directory + configure/Makefile
912 kes Eliminate PoolId from jcr -kes it is in jcr->jr.PoolId
913 kes Implement store_bit scanner to replace store_yesno. Mostly done.
914 kes Implement new store_bool that stores in a bool.
915 kes Add true/false to yes/no conf directives.
916 kes Make first cut at changing appropriate store_yesno to store_bool.
917 kes Complete implementation of Pool storage devices.
918 kes Move starting clones to job.c
919 kes Move create_restore_bootstrap_file() to job.c
920 kes Make copy_storage() more general to be able to handle
922 kes Cleanup a lot of migration code for manual running, including
924 kes Move getting a scratch Volume into a subroutine.
925 kes Make all places a Volume that is added to a pool to
927 kes Fix bug in autochanger recycle code (improper edit 64 bit).
928 kes Fix segfault in restore command when no value specified.
929 kes Start adding code to handle multiple MediaTypes in restore.
930 kes Eliminate race condition in getting Volume name for
931 two drive autochanger.
932 kes More debug code in autochanger.
933 kes Add storage keyword to bootstrap file, add parsing.
934 kes Move slot in bsr file into Volume record as there will be
935 a different slot for each Volume.
938 kes Implement Pool storage overrides.
940 kes Implement first cut of Migration.
941 kes Implement mysql_use_result() from patch by Karl Hakimian.
942 This reduces significantly the memory consumption during
943 the restore tree building, and hence runs faster too.
944 kes Implement StorageId patch supplied by user (reggie) in bug
945 #536. This should permit Bacula to work correctly with two
947 kes Implement Job listing variations suggested by a user.
948 kes Move updating bootstrap code in backup.c to subroutine
949 update_bootstrap_file().
950 kes Add new job status elapsed time and bytes written user
951 friendly job report output patch sent by John Kodis
952 <kodis at comcast.ne>.
953 kes Implement a storage list in Pools.
954 kes Separate out setup_job() code from run_job().
955 kes Get migration working -kes lots of changes in mac.c in both
957 kes Apply patch from user (Eric Bollengier I think) that fixes a
958 DIR crash when no arguments are supplied to a dot command.
959 kes Fix typo (strcpy->strcmp) in ua_prune.c as reported by Martin.
960 kes Fix command arg name->volume in label command of gnome-console.
961 kes Fix SD acquire.c to release correct DCR by explicitly testing
962 on the dcr address rather than trying to devine if it is a read
963 or write dcr. This failed in error conditions when the device was
967 kes Apply user supplied patch for more readable rate output
969 kes Continue implementing migration.
970 kes Implement support for removable filesystems in SD.
971 kes Ensure that btraceback scripts can be read by anyone.
972 kes Replace dvd-freespace and dvd-writepart by dvd-handler.
973 kes Correct bug where canceling restore before the FD contacts
974 the SD causes the drive to be left in read mode.
975 kes Move ofline_or_rewind into DEVICE::close().
976 kes Eliminate close_device.
977 kes Convert several dev subroutines to methods (e.g. bsf,
979 kes Eliminate force_close_device().
980 kes Implement Device Type directive in Device resource that
981 can have values File, Tape, Fifo, DVD, or Prog.
982 kes Add has_cap() method to Device.
985 kes Add patch from bug #527 to allow RedHat user to specify
986 options/user/group for starting each daemon in
989 kes Add two new queries to query.sql provided by Arno. One
990 list volumes known to the Storage device, and the other
991 lists volumes possibly needing replacement (error, ...).
993 kes Add periodic (every 24 hours) garbage collection of memory
994 pool by releasing free buffers.
996 kes Correct bug counting sized (for display only) in smartall.c
997 kes Print FD mempool stats if debug > 0 rather than 5.
999 kes Make db_lock() mutex error fail the job rather than abort
1000 Bacula. Canceling the job caused the mutex to fail.
1001 kes Correct bug in alist.c that re-allocated the list if the
1002 number of items goes to zero.
1003 kes Move the reservation system thread locking to the top level
1004 so that one job at a time tries all possible drives before
1006 kes Implement a reservation 'fail' message queue that is built
1007 and destroyed on each pass through the reservation system.
1008 These messages are displayed in a 'Jobs waiting to reserve
1009 a drive' list during a 'status storage='. Note, multiple
1010 messages will generally print for each JobId because they
1011 represent the different problems with either the same drive
1012 or different drives. If this output proves too confusing
1013 of voluminous, I will display it only when debug level 1
1014 or greater is enabled in the SD.
1016 kes Add enable/disable job=<job-name>. This command prevents
1017 the specified job from being scheduled. Even when disabled,
1018 the job can be manually started from the console.
1019 kes During 'update slots' clear all InChanger flags where the
1020 StorageId is zero (old Media records).
1022 Beta release 1.38.4:
1024 kes Fix autochanger code to strip leading spaces from returned
1025 slots number. Remove bc from chio-changer.
1026 kes Back port a bit of 1.39 crypto code to reduce diffs.
1027 kes Fix first call to autochanger that missed close()ing the
1028 drive. Put close() just before each run_program(). Fixes
1031 kes Add PoolId to Job record when updating it at job start time.
1033 kes Pull in more code from 1.39 so that there are fewer file
1034 differences (the new ua_dotcmds.c, base64.h, crypto.h
1035 hmac.c jcr.c (dird and lib) lib.h md5.h parse_conf.c
1036 util.c. Aside from ua_dotcmds.c these are mostly crypto
1038 kes Implement new method of walking the jcr chain. The
1039 incr/dec of the use_count is done within the walking
1040 routines. This should prevent a jcr from being freed
1041 from under the walk routines.
1046 kes Start implementing Verify list output.
1047 kes Move the suitable_drive flag to a better place to prevent
1048 premature termination of the reservation if all drives
1049 are busy -kes should fix Arno's diff/inc pool failures.
1051 kes Add mutex to single thread VSS code in Win32.
1053 kes Simplify code in askdir.c that waits for creating an appendable
1054 volume so that it can handle multiple returns from the wait
1056 kes Modify the wait code to permit multiple returns.
1057 kes Return a zero when "autochanger drives" is called and
1058 it is not an autochanger.
1059 kes Make rewind_dev() a method taking a DCR as an argument.
1060 This permits closing and reopening the drive if the
1061 rewind fails as happens if the drive was loaded while the
1062 file descriptor was open. This refreshes the file descriptor.
1063 kes Remove the ST_OPENED flag and always rely on fd < 0 for knowing
1064 if the device is open or not. This should eliminate
1066 kes Return error if reserve cannot find at least one suitable device.
1067 kes Make wait_for_sysop() return correct state information.
1068 kes Fix Win32 state file problem. write was not using compat
1069 code. This should fix bug #500.
1071 kes Modify gui on command to set only GUI mode and not batch.
1072 kes Modify .messages command to always print messages regardless
1074 kes If GUI mode is on, suppress automatic printing of
1076 kes Delete old bnet packet code.
1077 kes Ignore new BNET_START_SELECT and BNET_END_SELECT signals in
1078 wx-console. -kes not implemented because bconsole must be updated.
1079 kes Modify restore command in wx-console to set gui on and to use
1080 only .messages instead of messages. Hopefully this fixes bug
1082 kes Fix seg fault in exit of acquire when canceling a job --
1083 reported by Wolfgang Denk
1084 kes Pull in latest reservation system changes from 1.38
1085 kes Make .messages command always print messages regardless
1086 of the automessages flag.
1088 kes Fix seg fault if user labels a drive directory bug #513
1089 kes Remove quotes around Version as it breaks things.
1091 kes Merge in Aleksandar Milivojevic's mods to the spec file.
1092 kes Apply sparse code fix for raw drives and fifos. Bug 506
1093 kes Thorsten fixed Unicode cd problem with wx-console bug 505.
1095 kes Correct reservation system to do a last ditch try
1096 for any mounted volume, then anyone anywhere.
1097 kes Add quotes around table Version because of
1098 error in MySQL 4.1.15 -kes bug report submitted.
1099 kes Correct some minor problems with btape in the fill
1101 kes Updates to ssh-tunnel from Joshua Kugler.
1102 kes Added a report.pl program from Jonas Bjorklund.
1103 kes Simplify the O_NONBLOCK open() code for tape drives,
1104 and always open nonblocking.
1105 kes Do not wait for open() if EIO returned (shouldn't happen).
1106 kes Eliminate 3 argument to tape open().
1107 kes Correct the slot # edited in the 3995 Bad autochanger unload
1109 kes With -S on bscan (show progress) do not divide by zero.
1111 kes Make cancel pthread_cond_signal() pthread_cond_broadcast().
1112 kes When dcr is freed, also broadcast dev->wait_next_vol signal.
1113 kes Remove unused code in wait_for_device.
1114 kes Make wait_for_device() always return after 60 seconds of wait.
1118 kes Add stubs for non-crypto build.
1120 kes Use localhost if no network configured
1122 kes Eliminated duplicate MaxVolBytes in cat update -kes bug 509.
1123 kes Remove debug print.
1124 kes Add bail_out in error during state file reading.
1126 kes Merge changes made to 1.38.3 into HEAD
1127 kes Add stubs for pygtk-console code
1128 kes Create Makefile.in for pygtk-console code
1130 kes Merge updates into 1.38 branch
1131 kes Update specs to include mysql4 define.
1132 kes Fix when attributes are sent, must be after binit().
1133 kes Stop read_record() if status not ok in second loop.
1134 kes Return rec->FileIndex in dcr->VolLastIndex for normal
1135 and partial records in read_record(). This allows bscan
1136 to get FileIndex at EOT correct.
1137 kes Fix butil.c to correctly set dcr -kes fixes seg fault in bls.
1139 kes Fix Win32 built to work with new crypto code.
1140 kes Apply patch supplied by user (slightly modified) to fix
1141 correct detection of holes in block devices and FIFOs.
1143 kes Apply patch supplied by user (slightly modified)
1144 to fix SD hang with multiple pools and bad client
1145 IP. Fixes bug # 508.
1147 kes Add nagios plugin to the examples directory. Submitted by
1149 kes Remove warning message about multiple saves of hardlinked files
1150 from find_one.c as it can generate too many warning messages.
1151 kes Modify most restore error messages to be queued so that they
1152 appear at the end of the job rather than mixted with the restore
1153 listing where they could be "lost".
1155 kes Reset timeout values before select() per patch from
1156 Frank Sweetser for problems with non-blocking sockets.
1157 kes Unlink the state file if either reading or writing it gets
1158 errors. Hopefully this will fix Win32 exit problems.
1159 kes Add sanity check in append.c to ensure that dcr is not NULL.
1160 This can happen if multiple drive autochanger SCSI control
1161 channel and drive indicies do not correspond.
1163 kes Get next volume from Scratch pool before creating a volume.
1164 kes Set new Pool defaults in Vol when moved from Scratch Pool.
1165 kes Remove argument from create_bacula_database for SQLite as it
1167 kes Add back index code so that two drive autochangers can get
1169 kes Change a bunch of debug levels to aid debugging autochangers.
1170 kes Fix reservation so that mutexes are properly applied.
1171 kes Rework reservation algorithm so that two drives can be used
1174 kes Landon merged his data encription changes into the HEAD
1175 kes Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
1176 If this patch is applied, the number of days can be specified with
1177 "list nextvol days=xx"
1179 "status dir days=xx"
1180 My use case is to be able to preview the next scheduled job (and the
1181 next tape to be used) on fridays if there are no scheduled jobs during
1185 kes Fix font code in gnome2 console user patch. Fixes bug #501.
1186 kes Fix malformatted bnet error message that caused seg fault
1188 kes Applied user patch to improve README.vc8 in src/win32.
1190 kes Add Migrate, Copy, Archive Job types (some where there)
1191 kes Correct some more editing of JobId's (for 64 bit compatibility).
1192 kes Ensure that StorageId is stored in Media record when ever possible.
1193 kes Add Migration Job to Job.
1194 kes Add Migration Time, Migration High Bytes, Migration Low Bytes
1195 Next Pool to Pool resource.
1196 kes Add more code to mac.c (migration archive copy).
1197 kes Change Start Storage daemon job to require read and write storage
1199 kes Pass read storage data to SD as well as write storage data.
1200 kes Remove old code from winservice.cpp
1201 kes Break on error in scan.
1202 kes Fix typo in signal.c
1203 kes Separate read/write DCR in SD. Add jcr->read_dcr.
1204 kes Cleanup how find_device() works.
1205 kes Add read output to Status in SD.
1208 kes Add red-black btree routines
1210 kes Remove abs() in bfile.c so that it compiles on Solaris.
1213 kes Fix crash in tray-monitor when daemon disconnects. Bug #479.
1214 kes Fix bnet-server bug found on OpenBSD. Bug #486
1215 kes Fix cancel failure bug. Bug #481
1216 kes Fix failure when Pool name has spaces. Bug #487
1217 kes Fix SD crash in autochanger code. Mutex failure. Bug #488
1218 kes Fix a couple of free()s in src/filed/acl.c
1219 kes Fix memory overrun in bfile.c in building OS X resource
1220 fork filename. Bug #489
1221 kes Add Pool name to SD status output.
1223 kes Apply SunOS patch for ACLs submitted by David Duchscher.
1224 kes Make sure to set storage before trying to set drive.
1225 kes Add bacula_mail_summary.sh to examples directory. It makes
1226 a single email summary of any number of jobs. Submitted
1228 kes Make sure when we do a mount to unblock the device even
1229 if the drive could not be opened.
1231 kes Remove the USE_WIN32STREAMEXTRACTION #defines (always on)
1232 and correct a few minor problems to make it build on Linux.
1234 kes Remove delete of CVS from all Makefiles
1235 kes Fix seg fault when clicking on Add button in wx-console
1236 restore panel. Bug #470.
1237 kes Fix copyright date and URL typo -kes bug #468.
1238 kes Change autostart install for FreeBSD to look for rc.conf
1239 rather than rc.local as suggested fix for bug #466.
1240 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1241 grant on status. Bug #465
1242 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1243 update script. Bug #464
1244 kes Tweak #ifdefing a bit in new Win32 stream code.
1245 kes Fix #ifdeffing for FD_NO_SEND_TEST.
1246 kes Add documentation of performance #defines
projects / bacula / bacula / blob