1 Technical notes on version 1.39
6 ebl Fix broken runscript on director. (RunBefore, RunAfter)
7 ebl Use M_FATAL instead of M_ERROR in runscript.c
9 ebl Small fix src/dird/job.c to add JobErrors count to catalog.
10 rbn Ignore UTF-8 marker at the start of .conf files.
11 rbn Add stab2cv to 3rd party dependencies. This is a utility I
12 wrote that is licensed under the GPL and available on SourceForge.
13 It converts the stab debugging info generated by gcc into Codeview
14 format. Currently it just translates function names to global
15 symbols. This is sufficient to get reasonable stack traces from
16 Dr Watson and to look at minidumps.
17 rbn Fix bug # 699 - winbacula client crashes whilerunning bat scripts.
18 rbn Enable Windows XP look and feel for the tray icons and wx-console.
19 rbn Add Windows specific FileSet example to bacula-dir.conf.
20 rbn Reorganize Start menu so that documentation and configuration are
23 rbn Change daemons and utilities so that if -c is omitted from the
24 command line AND there is no configuration file in the current
25 directory then the "standard" configuration file (eg
26 /etc/bacula/bacula-*.conf) will be used. If the argument to -c
27 doesn't contain any path separators AND there is no configuration
28 file by that name in the current directory then the "standard"
29 configuration file directory will be searched for a file by that
31 rbn Fixed restore on Windows so that backslashes as path separators works.
32 rbn Add missing query.sql file to Windows installer.
33 rbn Fixed Windows versions of catalog backup scripts.
35 kes Fix optional files in Makefile.in of src/filed that caused
36 a syntax error when using no optional files.
38 lf Fix a cosmetic bug in filed.c that caused spurious OpenSSL error
39 messages; there is no reason to attempt to load a private key.
40 from master key files.
42 Version 1.39.26 released:
44 kes Apply the three patches from Richard Mortimer.
45 bacula-reposition.patch, bacula-tape-reopen.patch, and
46 bacula-eod.patch. This corrects tape positioning on older devices,
47 and also a problem with btape.
48 kes Apply fix from bug report #696 where writing to a FIFO does not
49 work due to a dumb typo.
50 kes Unlock the tape door before the file descriptor is released. This
51 should fix lots of somewhat subtle failures when using an autochanger.
53 kes Correct mtx-changer bug that I introduced in a recent commit, and
54 pointed out by Robert Nelson -- thanks.
55 rbn Fix Windows' daemons so that messages print to stdout if not
57 rbn Add daemon name to trace file name (eg bacula-dir.trace).
58 rbn Fix environment variable expansion in directory names on Windows.
59 rbn Fix autochanger support in fill command.
60 rbn Update SQL scripts to match Unix versions.
61 rbn Fix daemon usage displays.
62 rbn Cleanup bacula-dir.conf template.
63 rbn Install openssl.cnf so that the openssl.exe installed in the
64 Bacula\bin directory can be used to generate keys and
65 certificates for TLS and encryption.
66 rbn Fix cleanup of spool files on Windows.
67 rbn Remove /silent option from daemons on Windows. The new default
68 is the same as the old /silent. To enable the message boxes that
69 previously were suppressed by /silent you must add /debug instead.
70 NOTE: As a result of this change, the first time you upgrade from
71 a previous version of 1.39.x you will receive the message
72 boxes when the remove of the old services succeeds. This
73 is the same behaviour as when migrating from a version prior
75 However, going forward, these message boxes will not appear on
76 upgrades or new installs.
77 rbn Add new /debug option. This option enables the message boxes that
78 previously were suppressed by the /silent option. In addition the
79 daemons running as services will open a console window if this
81 rbn Fix bug with service not being removed on migrated installs. This
82 should correct those cases where the file daemon install was failing
83 when upgrading from versions prior to 1.39.x.
85 kes Turn on heap reporting in Dir with zero debug level.
86 kes Send a message to the sys log when Bacula forces a SEG FAULT, and
87 send the same message to stdout.
89 kes Begin work on new GUI "console".
90 kes Make configure look in non-standard MySQL library directory
92 kes Make mtx-changer automatically configure the autochanger wait
93 procedure for Solaris, FreeBSD, and Linux. Previously, only Linux
95 kes Correct drop_sqlite_tables.in script to not delete the database.
96 kes When writing to a log file, close and reopen the file descriptor
97 if there is an error writing the file.
98 kes Modify the autochanger loaded?, load, and unload commands to print
99 the full text of any mtx output if there is an error. Helps to
100 ease diagnosis of autochanger problems.
101 kes Correct a few Win32 errno returns in the VSS code so that hopefully
102 a resonable Win32 error message will be printed.
103 kes Convert a few strcat()... to bstrncat() in the Win32 code.
105 rbn Added Windows version of bsmtp.
106 rbn Fixed path search for Windows so that Bacula\bin is automatically
107 searched for programs and scripts.
108 rbn Fixed bugs in mtx-changer.cmd and made template bacula-sd.conf
111 Version 1.39.24 released:
113 kes Apply dvd find volume patch from Richard Mortimer.
114 kes Eliminate the dvd specific mount routines using only the
116 kes Make update_free_space a method of DEVICE and rename
119 kes Require a messages command acl to be able to receive messages
121 kes Add console, system, and scan job types in util.c.
123 kes Print the Volume purged message only for real jobs to keep
124 from cluttering up the daemon messages.
125 kes Lock the tape drive door while Bacula is using the device.
126 kes Add back the 'No Jobs running' message to FD and SD status because
127 my regression script depends on it, and I'm too lazy to change the
129 kes Start using structure assignments (not too happy about it ...).
130 kes Fix a bug in the tools Makefile that broke on Solaris.
131 kes Unload any autochanger drive during a 'release' command.
133 kes Enhance error message when restoring without bootstrap file.
134 kes Check restored size only for regular files.
135 kes Store Python job level in job record in Dir.
136 kes Add back code to open tape device nonblocking, but if rewind fails
137 release file descriptor.
138 kes Modify acquire.c to first try autoloading the device. Also, ask operator
139 to mount tape if drive cannot be opened.
140 rbn Made Windows service tray status windows resizable.
141 rbn Fixed horizontal scrolling of text in status window.
142 rbn Preserve horizontal and vertical scroll position while
143 updating. This prevents the display being reset to the
144 top line every 5 seconds.
145 rbn Fix Windows cross-compile compatibilty problems with
146 *nix variants such as OS X without the zic command.
147 rbn Eliminate dependency on man2html.
149 kes Update src/win32/dll/bacula.def for change in BPIPE definition for
151 kes Fix a compiler warning in compat.cpp
152 kes Change strcpy to bstrncpy in compat.cpp
153 kes Remove some broken code in bdb_list.c
154 kes Fix, hopefully the last, ACL problem in the restore command.
155 kes Update the README.mingw32
156 kes Add new version of upgrade-win32-client.txt to examples directory.
157 Submitted by Michel Meyers.
158 kes Print an INFO message in the job report when a Volume is marked Purged.
159 rbn Fixed handling of external program and script execution
160 so that the format of the command line is more flexible.
161 Now executable path names containing spaces are translated
162 to the equivalent short name automatically. The result is
163 passed to cmd.exe with the quotes removed.
165 kes Apply the recycle patch from Richard Mortimer.
166 kes Convert a few if statements in dev.c to switch statements.
167 kes Start using print_errmsg instead of bstrerror().
168 kes Print a job message in SD when a job is marked to be canceled.
170 kes All code added back. Fixed block.c read/write to loop only 3
171 times. This apparently keeps the OS from crashing (at least
173 kes The kernel bug still persists. Backup something then immediately
174 do a bscan on the same tape, and the kernel will crash.
175 kes Simplifed tape open(). It no longer uses nonblocking mode, which
176 means that opening with no tape loaded will probably take at least
177 6 minutes before an error is reported.
178 kes Do not use MTSETDRVBUFFER if not running as root. Do a MTRESET
179 when doing set_os_device_parameters.
180 kes Report open error in mount.c
181 kes Remove all .exe files from the installer directory on make clean.
183 kes Start adding back removed code.
184 kes Back out a number of changes because backups to tape crash my
186 kes Remove the inetd code from the File daemon.
188 kes Add -c option to pg_dump so that it initializes tables when
190 kes Fix FirstWritten time on Volume to be obtained from SD so that
191 it is the actual time the volume was first written.
192 kes Minor Makefile changes.
193 kes Handle EBUSY during read(). Improve how EBUSY is handled in write().
194 ebl Add yes keyword to prune/purge command
196 kes Correct a test in block.c that prevented restore of a DVD from
197 looking at the last part in the spool directory.
198 kes Make some error messages clearer mostly by using the word DVD
199 in the message. Improve infor message in read_record for DVDs.
200 kes Remove DVD kludges in dircmd.c label/relabel.
201 kes Move the dvd relabel code from dircmd.c into
202 write_new_volume_label_to_dvd() adding a relabel argument.
203 kes Rewrite the truncate_dvd() code to be much simpler and
204 more logical. First blow away any spool part, then create a
205 new empty part and write to the DVD.
206 kes Rewrite the can_write_on_non_blank_dvd() code making it
207 only ensure that no valid data is on the DVD -- i.e. it
210 kes Minor Makefile fixes.
211 kes Put attach_dcr_to_dev in a subroutine.
212 kes Make attaching/detaching to/from a device use a flag and
213 only detach if actually attached.
214 kes Add dvd-simulator.in to scripts directory and add to configure.
215 kes Fix code in acquire.c that checks fd != 0 to use dev->is_open().
216 This could be a cause of a number of drive reservation problems.
217 Note, this code is now in attach_dcr_to_dev().
218 kes Suppress doing Volume updates if it is a system job. This should
219 prevent the DVD label blocking.
220 kes Clear the freespace ok flag in a couple of strategic places.
222 kes Put removing zero sized spool part file in subroutine and
223 call from release_device().
224 kes Add Richard's patch for relabel to dircmd.c, but save and restore
226 kes Rework a lot of subroutines in dev.c to take dcr as an
227 argument. This is done to eliminate the usage of attached_dcrs
229 kes Change truncated_dvd to blank_dvd, which seems more suitable.
230 kes Apply most of Richard Mortimer's truncate patch.
231 kes Create lseek() method for DEVICE that takes dcr as an
232 argument. This is to eliminate the use of attached_dcrs in
233 lseek(). The calls to lseek_dev() must still be changed.
235 kes Apply Richard Mortimer's patches for printing an error
236 message in btape when a DVD is used, and to initialize traceback.
237 kes Added error message to btape when trying to access a file.
238 kes Move prototype of update_slots() to protos.h.
240 kes Add JobErrors, JobFiles, SDJobFiles, SDJobErrors, SDJobStatus,
241 and FDJobStatus to the Director Python variables.
242 kes Make sure valid argument passed to str_to_utime() where Arno
244 kes Apply Richard Mortimer's patch for bcopy, bextract, and bscan.
245 I.e. part of two different patches.
247 kes Modify disk changer to simulate some of the error conditions
249 kes Make sure the close() call in the SD tools is just before the
251 kes Implement dir_get_volume_info() in bls using the patch from
252 Richard Mortimer but call find_num_dvd_parts().
253 kes Implement find_num_dvd_parts() that mounts and scans a DVD
254 and counts the parts.
255 kes Move the omode code in open_dvd() up so that the cannot
256 write on blank disk can check can be bypassed for read mode.
259 kes Disable normal data spooling for DVD writing which uses
260 a different spooling mechanism.
261 kes Apply patch from Richard Mortimer to ensure that the number
262 of DVD parts is correctly updated.
263 rbn Save installer details log in the Bacula directory as
265 rbn Add installer generation of client and storage templates
266 suitable for @inclusion on the director.
267 rbn Mark previously installed Win32 components read-only since
268 deselection doesn't do anything.
270 Version 1.39.22 beta released:
272 kes Fix logic error in handling error return from mtx-changer
274 kes Make status from SD aware of -1 (unknown) Slot status.
275 kes At Eric's suggestion make both the 'slots' and 'drive' commands
276 to the Storage daemon work even if the drive is busy.
277 kes Make two separate Win32 menu links for starting bconsole and
278 wx-console in winbacula.nsi
279 kes Apply DVD part_spooled patch from Richard Mortimer
280 richm@oldelvet.org.uk
281 kes Put installer/Readme.txt into Win32 EOL format for Notebook.
282 rbn Fixed problems migrating settings from previous releases in
283 Win32 installer. Add Readme.txt with an option to show it on
284 the installer Finish page.
286 kes Use get_catalog_resource() to open catalog database
287 to ensure that ACLs are respected and that user is
288 correctly prompted for database.
289 kes Integrate multiple console/director patch from
290 Carsten Paeth calle@calle.in-berlin.de
291 ebl Add character substitution in Job/JobDefs WriteBootStrap.
292 You can use now 'WriteBootStrap = '/path/%c_%n.bsr''
293 kes Apply patch supplied in bug #656 to pass priority field
294 in the run dialog to the Director in gnome console
295 kes Restore DCR after VOL_NAME_ERROR in mount.c. Hopefully
296 this will fix bug #627 where Bacula eventually gets
297 confused about what Volume it wants.
298 kes Add a new close_part() class in the SD to save the device
299 state around open/close_part/open for DVD writing. This
300 should fix the num_dvd_parts getting zeroed as reported by
302 kes Apply patch from Richard Mortimer that correct edit code
303 for debug output of st_size.
304 ebl Add support of encrypted data stream to bscan.
305 display data_len instead of data content (may be binary)
307 kes Add dev->close() in dir_ask_sysop_to_mount_volume() in
308 bcopy. Fixes bug #669 reported by Eric.
309 kes Fix incorrect number of arguments in SQL statement in
310 sql_get.c as reported by Eric.
312 kes Update examples directory.
313 kes Remove unused variable in winservice.cpp
314 kes Make Win32 make command build installer.
315 rbn Add new Install Type page, used to select between Automatic
316 and Custom installs. Automatic installs only prompt for
317 configuration items that can't be reasonably defaulted.
318 rbn Added Bacula logo to page headers.
319 rbn Added Upgrade support
320 - Configuration and component selection are migrated from
322 - Configuration of upgraded components is preserved and
324 - Configuration of new components is handled according to
325 the Automatic / Custom selection.
326 - Component selection is defaulted to previously selected
328 rbn Installation of Server components is disabled on
329 Windows 95, 98 and ME.
330 rbn Added URLs for support, info and upgrades to Bacula entry
331 in Add/Remove Programs.
332 rbn Added Version info to Bacula entry in Add/Remove Programs.
334 kes Correct dvd code that breaks tape labeling.
335 kes Implement Enabled on update slots.
337 kes When doing a label, pass the VolBytes back to the Director,
338 which puts it in the catalog.
339 kes Print an error message if the user attempts to prune an
341 kes Need to start using %ld when sscanfing 32 bit values.
343 kes Correct the counting of VolCatBytes for DVDs.
344 kes Add code to mount.c to require that VolCatBytes corresponds to
345 what is actually found when doing an append.
346 kes Update freespace only after writing on the DVD.
347 kes Remove code that blows away the current part in the spool file.
349 kes Apply new dvd-handler patch from Richard Mortimer.
350 kes Tweak so that debug level 20 shows only DVD commands.
351 kes Correct spooled_part flag in dev.c close() so that it is cleared
352 when the spool file is deleted or does not exist.
353 kes Print part number in read_records when eof hit (restore).
354 rbn Installer default changed to start services on new install.
356 kes Make find with no args in tree restore return error rather than
357 stopping the selection. Fixes bug #665
358 kes Rework DVD writing to ensure that the last part is written
359 on open_next_part when dealing with a spool file.
360 kes Correct the lseek_dev() routine to handle end point correctly
361 (bug introduced by me).
362 kes Allow part number to exceed num_dvd_parts in lseek_dev().
363 rbn Change make_session_key on Windows to use WIN32 APIs to produce
365 rbn Add new tool scsilist.exe which displays the changer, tape and
366 CD/DVD (1394, SCSI, SATA, ATAPI) devices and the information required
367 to add them to bacula-sd.conf.
369 kes Apply dvd-handler patch from Richard Mortimer.
370 kes Apply dvd error check patch from Richard Mortimer.
371 kes Apply bpipe race patch from Richard Mortimer.
372 kes Rework how DVD labels are handled and set append only
373 when part > num_dvd_parts.
375 kes Rework many features of DVD writing and reading. Added many error
376 messages. Most importantly changed part to represent the current
377 part number base zero. This makes current DVD writing incompatible
378 with previous version.
380 kes Add host:port to connect failure messages to FD and SD from Dir.
381 kes Add WhereACL to console ACL list. If nothing is specified, only
382 the default is permitted for restore. Otherwise, *all* allows any
383 path, or you can specify permitted paths. This should allow control
384 over where users can restore files. This is untested.
385 kes Modified message to add a ? (as in loaded?) when querying the autochanger
386 for what Slot is loaded.
387 kes Fixed the use of Slot, so that is more correctly maintained, thus
388 eliminating unneeded duplicate calls to determine what Slot is loaded.
390 kes Install man pages with 'make install'
391 kes wx-console crashes because of differences between Bacula and wxWidgets
392 malloc()/free(). Tweak wx-console to use bmalloc()/bfree() for Bacula
394 kes correct improper indenting in wx-console/console_conf.c
395 kes update wx-console header copyrights
396 kes Fix bug #658 where wx-console mangles file/directory names containing
399 kes Add Media.Enabled flag to client backups for dotcmds.c
400 kes Enforce Media.Enabled=1 for a current restore to work.
401 kes Require restore case 3 to have sqlquery permission to work.
402 kes Remove obsolete del_MAC sql command.
403 kes Ensure that bscan creates Volumes with Enabled=1.
405 Version 1.39.20 beta released:
407 kes Correct missing Client table reference in SQL pointed out by
410 kes Fix Win32 build (new entrypoint, start baculafd).
412 kes Add -n option to bconsole to turn off conio.
413 kes Print JobIds to be migrated in Job Report.
414 kes Add additional user supplied notes to the messages part of
415 bacula-dir.conf concerning multiple email addresses.
416 kes Fix an incorrect comment pointed out by a user in dvd_handler.in
417 kes Add more recent Feature requests to Projects file.
419 kes Apply Maritn's fix to src/win32/Makefile.
420 kes Apply Martin's fix to configure.in for pthreads on FreeBSD 4.x
421 kes Implement pruning for Migration and migrated jobs.
422 kes Implement PoolOccupancy migration.
423 kes Implement PoolTime migration.
425 kes If doing a mount, look for a slot, and if specified pass it to
426 the SD so that it can load the autochanger.
427 kes Return DVD=1 flag if a label command is done to a DVD. This
428 permits setting VolParts to 1.
429 kes Apply DVD patch from Richard Mortimer <richm@oldelvet.org.uk>, but
430 rework ua_label code based on DVD media type to use DVD flag returned.
432 kes Eliminate some compile warnings in dird_conf.c
433 kes Format the bytes field in the terminated jobs part of the status
434 command for the three daemons with suffixes to reduce print size
435 of backup bytes. Suggested by a user.
436 kes When not descending into a directory, print the File= name that
437 triggered it -- makes why not descending a bit clearer.
438 kes Do not unload autochanger when doing a list command -- basic code
439 from Eric Bollengier.
441 rbn Reworked the MinGW32 build-dependencies script, it has been renamed
442 to build-depkgs-mingw32. It now handles two options -h to display
443 help and -C to reextract the source and apply the patches. The -C
444 option is useful for updating the source after new patches are
446 rbn Moved the 3rd party package URLs to a separate file External-mingw32.
447 This allows updating to new versions without having to modify the
448 script and makes it easier to figure out which packages and which
450 rbn Added a new script build-depkgs-msvc.cmd which does the same thing
451 as build-depkgs-mingw32 except they are built using Microsoft Visual C
452 and placed in the depkgs-msvc directory. There is also an
453 External-msvc file to describe the packages.
455 rbn Fix Windows cross-compile compatibilty problems with FreeBSD.
457 kes Fix bug #462 incorrect error message printed when client script called
458 from File= was not found.
459 kes Fix bug #558 (waiting for feedback) where Bacula needs too much time to
460 do a rewind on Solaris when no tape is in the drive (Solaris does not
461 have the detailed errno found on Linux). Added Solaris specific code.
462 Note, this may apply to other OSes as well.
464 kes Defined BUILDING_CATS in src/cats/cats.h so that *nix builds.
465 dsb Updated rpm spec for 1.39 - updatedb 9 to 10, add new man pages,
466 fix bug 648 - update sqlite script patches, lock out gnome2console
467 builds for platforms with gtk+ < 2.4.
468 Updated build_rpm.sh - add remote source directory, add switch for
469 signing, refine file names.
470 Updated spec file again for Mandriva build as they have this curious
471 custom of silently converting all manpages to bzip2 format just before
472 the final packaging step.
474 rbn Fixed the Windows Makefiles so that they won't accidentally try and
475 pickup binaries for the Unix build. This allows both the Unix
476 build and the Windows build to be built in the same tree without
477 interfering with each other.
478 rbn Fixed error handling and cleaned up mtx-changer.cmd.
479 rbn Added the rest of the database scripts. These are installed but are
480 not yet edited for variable replacement.
481 rbn Broke out the cats functionality from bacula.dll and put into new
482 separate dlls for each database type. At installation time the
483 correct one is copied to bacula_cats.dll.
484 rbn Eliminate the need to install the mysql.dll on client only builds.
485 rbn Moved dird/sql_cmds.c into the cats directory so all the database
486 specific #ifdefs were in the cats directory.
487 rbn Added a new sql_cmds.h with all the declarations for the variables
488 exported from sql_cmds.c.
489 rbn Moved catalog_db[] from lib/message.c to a new routine db_get_type()
490 which is implemented in bdb.c, mysql.c, postgresql.c and sqlite.c in
492 kes Correct improperly formatted list command output reported by Dan.
494 kes Correct despool time calculation.
496 kes Remove previous changes to compat.cpp as they create problems.
497 kes Use old style MD5 for FileSets to avoid Full saves on every Job.
498 kes Attempt to fix problems with the msg_queue crashing on Solaris
499 when Bacula is terminating, but problems remain.
500 kes Add WIN32_VSS to HAVES in src/Makefile.inc.in to correct VSS
501 name editing problems with too many \\?\es.
502 kes Fix some Bacula source code style problems in compat.cpp.
503 kes Add debug code to compat.cpp and convert non-Bacula debug code
506 kes Change the name of the technical notes file from kes-1.39 to
507 technotes-1.39. Prefix my messages with 'kes '.
508 kes Allow dequeue_messages() to be called twice. Should fix bug
510 kes Add Job type to bscan Job information output.
512 kes Update copyright date in program files, and for the most part
514 kes Implement %q in bsnprintf.c apparently I forgot it.
516 kes Make disk-changer sed command compatible with FreeBSD.
517 kes Make a first cut at a ReleaseNotes and ChangeLog for a
519 kes Make make clean descend into the src/win32 directory.
520 kes Fix some #ifdefing so that Solaris and FreeBSD compile
521 sys/stat.h was turned off.
522 kes Use suffix editing for new transfer rate messages.
523 kes Attempt to come up with a workaround which seems to be an OS
524 bug where write() returns EBUSY. IMO this should not happen.
525 It triggered in truncatebug test. The workaround retries using
527 kes Eliminate a strerror() call in a class method that failed with
529 kes Use rm -rf rather than rmdir to delete the src/win32/release
530 directory during make clean.
532 kes Make bscan ignore ACL streams.
533 kes Update projects files with new Feature Requests.
534 kes Generate current English and French manuals and upload
536 kes Update the home page to include the new British/French flags to
537 switch between translations. Work done by Alexandre Baron.
538 kes Make disk-changer script print an error message if the changer
539 directory is not defined.
540 kes Create a generic DB routine for getting an int (32/64 bit) from
542 kes Add more migration code.
543 kes Add a few more files to .cvsignore here and there.
544 kes Minor fixes for SD write rate and despooling rate.
545 kes Turn off new test code in src/console.c
549 kes Incremented the version number to signify that all of Robert's code
550 for Win32 that was in the branch is now integrated into the HEAD,
551 and that Eric has submitted code that we hope will provide limited
552 backward compatibility with 1.38 file daemons (more testing to be
554 kes I rationalized a few of the names of the variables (mainly jcr names)
555 that are used during migration as keeping three different jcrs at the
556 same time clear in ones head is not easy.
560 eb Tweak new runscript feature to work with 1.38.x FDs.
561 eb Correct crypto.c to fix segfault when restoring an encrypted stream
562 on fd which don't use rsa keys.
563 eb Add yes/no English keywords on localized yes/no questions.
565 kes Several important commits from Robert Nelson for code cleanup and
567 kes Modify console.c so that when conio is enabled, it converts \n to
568 \n\r before outputting to the console. Hopefully this will fix
569 the problems with expect in Perl that Eric saw.
571 kes Change cats/sql.c to eliminate %-*s format, which I think is turned
573 kes Add Comment field to llist of a volume.
574 kes Allow true/false in some yes/no questions.
575 kes Implement update volume enable=(on|off|true|false|archived|0|1|2)
576 kes Remove a few /n's when scanning commands from another daemon. This
577 permits adding additional fields later.
578 kes Modify dbcheck to handle ctl-d and to delete Log table entries.
579 kes Update README.mingw
581 kes Tweak authentication to work with 1.38.x FDs.
582 kes Tweak catalog make scripts.
583 kes Fix catalog upgrade scripts so that they work.
584 kes Correct despooling debug code to eliminate race condition.
586 kes Add additional fields as specified by Arno to LocationLog.
587 kes Add comment field to the Media record.
588 kes Add Time field to the Log record.
589 kes Correct migration SQL (thanks to Bill Moran) so that it
590 runs with PostgreSQL also.
591 kes Add spooling/despooling info in status output of SD.
593 kes Spend a lot of time integrating mkcdrec with the rescue disk.
594 kes Add VOLMGMT message class for volume management messages (none yet).
595 kes Add CATALOG as a destination. It goes into the LOG table.
596 kes Implement the Log table in the DB.
597 kes Implement the Location Log table in the DB (for user use).
598 kes At Eric's request add a run_scripts() just after blast_data in
601 kes Add Enabled column to Location, correct some typos in DB schemas.
602 kes Correct bug I introduced into RunScripts enum.
603 kes Add log table to Catalog
604 kes Purge original job migrated if the migration terminates normally.
605 kes Cleanup purging of files/jobs so that it is done only in a
607 kes Add new VOLMGMT message class.
608 kes Add Catalog message destination (user conf code remains to be written).
610 kes Modify read_record and friends to properly deal with migration
612 kes Update debug code in read_record.
614 ======================= Warning ==========================
615 Separate read and write storage in Jobs in the Director. This
616 is a major rewrite of some of the low level code and hence has
617 a high probability of introducing bugs.
618 ==========================================================
620 kes Move the job init code up to *before* the job is put into
621 the job queue (resource allocation queue). This permits the
622 job to establish whether it will read or write or do both.
623 kes Add name() methods to all the resource classes.
624 kes Implement separate read and write storage resource
625 allocation/deallocation in jobq.c
627 ======================= Warning ==========================
628 Implemented new method of getting the default Storage from the Media
629 record rather than from the MediaType for restore. As a fall
630 back, if no Storage is defined, use the MediaType. This
631 eliminates most all prompts if there are multiple MediaTypes
632 used. This is an important and fundamental change.
633 ==========================================================
635 kes Add more detail (Storage, Device) to list of volumes printed
637 kes More code in migrate. In particular start multiple jobs if
639 kes Probably overkill, but ensure that the bsr is unique even within a
641 kes Rework bsys.c drop() so that it now should work as expected.
642 kes Update a bunch of old copyrights -kes particularly in .h files.
643 kes Remove src/lib/bshm.c/h
647 ======================= Warning ==========================
648 All hash codes in the database are now kept in world
649 compatible base64 format (no = filling). This means that
650 all FileSets will be updated and if you are running
651 verify jobs, you must do an InitCatalog.
652 Authentication uses the new algorithm, but should be
653 backward compatible with 1.38.x
654 ===========================================================
656 kes Modify the authentication routines so that the 1.39.15 Director
657 always runs with the compatible binary to base64 code (same as
658 the rest of the world). It will however detect if an SD or
659 FD is running the old code and if that is the case, will use
660 the old algorithm for authentication. However, all consoles must
661 use the compatible algorithm, and all data entered into the database
662 (all hash signatures, MD5, SHA1, ..., and all FileSet hashes) will
663 use the compatible algorithm.
664 kes Rename the cram_md5 routine names to be slightly more appropriate
665 to what they are doing (challenge and respond).
666 kes Robert committed his #ifdef and header cleanup.
668 kes Fix a compiler warning in files/backup.c
669 kes Cleanup NOT NULL vs DEFAULT 0 in database creation.
671 kes Robert committed his low impact changes.
672 kes I removed a size_t from the jcr.h definition.
673 kes Update the tape regression scripts (still to be tested).
674 kes Add gcc and gcc-c++ requires to srm as suggested by a user.
675 kes Require done or quit to exit from in memory tree restore.
677 kes Write install/uninstall of new manpages. There are now a
678 pile of man pages. Some of which need a lot of work.
680 ======================= Warning ==========================
681 The --mandir ./configure option now points to the top level
682 man directory. The man files will be installed under
683 mandir/man8 and mandir/man1 as appropriate.
684 ==========================================================
686 kes Add complete text of GPL to LICENSE.
687 kes Implement job report that indicates where Storage and Pool
688 came from -kes with overrides and Pool storage and NextPool,
689 it is all very complicated.
690 kes Create a few common subroutines for backup.c and migrate.c
691 kes Eliminate warning messages from tray-monitor.c
693 kes Apply fix for scheduler for missing unlock_jobs().
694 kes Clean out autoconf caches before rebuilding configure
695 kes Fix the FreeBSD pthreads lib define updated by Dan.
696 kes Add missing semicolon in src/console/console.c
697 kes Add Robert's enhanced version of build-win32-cross-tools
698 as well as his patch file.
699 kes Note, the new gcc options are likely to break building of
700 wx-console or the tray-monitor ...
702 kes Implement Robert's suggestion to suppress printing compile lines.
703 kes Detect GCC correctly (I hope)
704 kes If using GCC (actually g++) add the following compiler flags
705 -fno-strict-aliasing -fno-exceptions -fno-rtti
707 ===================== Warning =============================
708 Turn on new bsnprintf() code. This could cause print output
710 ===========================================================
712 kes Fix crypto when not using openssl. I previously overlooked this.
713 kes Eliminate crypto type punning problems by eliminating void * and
714 using uint8_t * instead.
715 kes Harden authentication failure in FD by single threading errors
716 and forcing a 6 second wait.
718 ===================== Warning =============================
719 Removed 'Accept Any Volume' directive.
720 ===========================================================
722 kes Major cleanup and simplification of regress using shell functions
723 (more tests to be converted to new format)
724 kes Add detection of 64 bit Irix as indicated by user.
725 kes Increment catalog database id from 9 to 10.
726 kes Add a few of the new database fields to the various C++
728 kes Implement code to fill in the most important new fields (e.g.
730 kes Ensure that most of the new fields are in create/get/insert/update.
731 More work to be done.
733 kes Update some very old licenses in src/cats.
734 kes Modify the database format for handling Migration jobs:
735 Add PriorJobId, RealEndTime to Job table
737 Remove Stripe from JobMedia record (not used, wasting space)
738 Add ScratchPoolId, RecyclePoolId, Enabled to Media record
739 Add Cost to Location table.
740 kes Delete mac_record subroutines.
741 kes Add new table values to create/update/get routines as appropriate.
742 kes Update the update_tables and make_tables scripts.
743 kes Make a first cut in using a union where multiple pointers (actually
744 pointers to pointers) are stored.
745 kes Make some changes to base64.c suggested by Robert and others and add
746 a small amount of documentation.
747 kes Add some changes suggested by Peter for Solaris (bregex...)
748 kes Make runscript.h always built because it needs to be pulled into
749 more places. In particular its RES was left out of a union.
750 kes Renumber the enum{} list in runscript.h to avoid starting from zero.
751 This makes it slightly easier to detect uninitialized variables.
753 kes Remove xpg4 lib from FreeBSD build as it is no longer needed and
754 sometimes creates install problems.
755 kes Change a couple of %T in strftime to %H:%M:%S as seen in Robert
756 Nelson's code. More to do.
757 kes Convert a few store_bit to store_bool in filed_conf.c.
758 kes DVD tweak to block.c as supplied by Uwe Muessel.
760 kes Modify configure.in to check for typeof().
761 kes In findlib/attribs.c use typeof instead of templates if possible.
763 kes Implement partial error messages for src/filed/acl.c
764 kes Fix return code to fail when doing update barcodes and
765 Pool resource is not found. This previously caused Volumes
766 to be labeled as cleaning tapes.
767 kes Small updates to projects.
769 kes Add Eric Bollengier patch for new RunScript directive. It breaks
770 compatibility between dird and fd.
772 kes Prevent DVD code from rewriting label if the device cannot be
774 kes Used __GNUC__ to detect GNU g++ as suggested by John Goerzen to
775 fix Debian build bug.
776 kes Fix Dir/SD run race in migrate.c, verify.c, and restore.c
777 kes Integrate manpages contributed by Jose Luis.
778 kes Update projects file.
779 kes Add manpages Makefile.in to configure.in
780 kes Remove installation of bacula.8 in scripts directory.
782 kes Implement patch submitted by cesarb in bug #606 to implement O_NOATIME
784 O_NOATIME is a open() flag which makes it possible to read a file without
785 updating the inode atime (and also without the inode ctime update which
786 happens if you try to set the atime back to its previous value). It also
787 prevents a race condition when two programs are reading the same file, but
788 only one does not want to change the atime. It's most useful for backup
789 programs and file integrity checkers (and bacula can fit on both
792 Recent versions of the Linux kernel and glibc have support for it (the
793 glibc support being mostly copying the O_NOATIME definition to
794 bits/fcntl.h). If there's no support for it on the kernel, trying to use
795 it does nothing (since the kernel ignores unknown flags).
797 If the kernel has support for it, trying to use it either works, fails
798 silently (mostly in remote filesystems), or returns errno=EPERM (if you
799 are not either the owner of the file or root). A simple way to prevent the
800 failure is to open the file without the flag and set it later with
801 fcntl(F_SETFL), ignoring any EPERM errors.
802 kes Applied patch posted by Jaime Ventura to bug #570 to correct failure
803 of restarted jobs to complete (due to a destroyed pthreads conditional
804 variable used by the message thread).
805 kes Fixed bug #619 where Bacula would not restart jobs with MaxRestartTimes
807 kes Apply patch from John Goerzen bug #611 to fix bad manual links in the code.
808 kes Apply patch from Rudolf Cejka bug #614 to removed trailing
809 colons in query.sql file.
810 kes Apply patch from Rudolf Cejka bug #613 to correct prunning of files
811 not to create orphans.
812 kes Apply patch from Rudolf Cejka bug #617 to use mtime instead of ctime
813 in restore long listing.
814 kes Apply patch from Rudolf Cejka bug #609 to use MarkId in verify.c instead
815 of incorrect MarkedId.
816 kes Apply patch from adioso bug #616 to correct text in manual (replace
817 Director with File daemon).
818 kes Rework a few of the zlib changes so that they build properly.
821 kes Move DIR 'run' command to SD before starting the message thread
822 as suggested by Cristopher Hull to avoid a race deadlock from
823 two threads using the bsock structure.
824 kes Modify LICENSE to correct some problems pointed out by Debian.
826 kes Correct EOF with no \n lex.c problem.
827 kes Tweak compat.h compat.cpp and merge with apcupsd
828 kes Add additional INFO messages if autochanger cannot be used.
831 kes Simplify Win32 Makefile
832 kes Correct count of buffers/bytes used by smartall.c
833 kes Updated compat.h after porting apcupsd to MinGW.
835 kes Work on getting wx-console building on MinGW. wxWidgets now builds
836 started adding Makefile ...
837 kes Moved MinGW library objects to src/win32/lib to reduce clutter.
839 kes Reloading a bad configuration file doesn't kill director any more.
840 Thanks to fix from Eric Bollengier.
842 kes Fix problem of accents with new Win32 code.
843 kes Integrate Howard's VSS patch. Tweak it a bit. VSS now
844 works in the MinGW build with the exception that there
845 is a problem with accented characters -kes i.e. there is
846 some mapping problem with wide characters.
847 kes The code no longer compiles with Microsoft VC++.
849 kes Start implementing Christopher's St.Bernard code.
850 kes Add Christopher's mods for opening files.
851 kes Strip \r \n from Win32 error messages (Christopher)
852 kes Add more info about Win32 system if unknown (Christopher)
853 kes Use bstrn(cpy, cat) routines to avoid overrun in compat.cpp
854 kes Fix a number of incorrect strings marked for translation, when
855 they should not be (e.g. commands).
856 kes Fix StartTime bug reported for ClientRunBeforeJob and RunBeforeJob
857 Patches supplied by user in bugs #608 and #599.
858 kes Use most recent of st_ctime and st_mtime in restore tree DIR
859 listing. This fixes some problems with Win32 printing incorrect
861 kes Correct the clock shift comm time calculation between the DIR
862 and the FD. It was added rather than subtracted.
863 kes Strip all backslashes in filenames to be restored on Win32
864 machines -kes the names should all be in Unix format, and if
865 there are any backslashes it is most likely due to an improper
866 FileSet definition, and the files will not otherwise be
868 kes Remove lib/regex.c (replaced by bregex.c).
869 kes Delete src/win32/License.txt
870 kes Modify installer to install LICENSE
872 kes Fix bug in build-win32-cross-tools script reported by Howard
873 kes Implement cross compiled bconsole
875 kes Fix barcode test, eliminate BOOL (doesn't exist on Linux).
876 kes Write first cut of README.mingw32
877 kes Add back ua_label barcode fix from Rufolf Cejka.
878 kes Integrate the majority of the Mingw cross-tools submission
879 made by Howard Thomson. Everything compiles, with zlib, openssl,
880 and VSS turned off. Linking needs a pthreads library ...
882 kes Add 'Dir Status' button to the gnome console.
883 kes More work on migration.
884 kes Restore non-compatible base64 coding to permit compatibility.
885 kes Display heap stats in Storage daemon without debug level.
887 kes Integrate most of the MinGW changes -kes more to do.
889 kes Implement using pg_config for finding PostgreSQL files.
890 Fixes bug #600. Patch supplied by user.
891 kes Remove -t option from mktemp in mtx_changer.in and use
892 working directory. Fixes bug #578.
893 kes Update job start time after the any run before job so that
894 files created by the script are only backed up once. Fixes
896 kes Strip trailing newline only from filenames entered in
897 the restore command when reading a file. This permits
898 the user to enter filenames with trailing spaces. Fixes
899 bug #549. The user supplied a patch that I modified slightly.
900 kes Use the most recent time (st_mtime, st_ctime) in the dir
901 command in restore. This gives the user a better idea of what
902 the newest file really is. This fixes bug #574. The fix
903 was suggested by the user.
904 kes Implement a compatible version of base64. This permits external
905 programs to duplicate Bacula's base64 algorithm using standard
906 routines. This fixes bugs #296, and 565. Patch submitted by
908 ================= Note ========================
909 Previous Signatures stored in the database are no longer
910 compatible with this. The main downside is for Verify jobs,
911 and doing an InitCatalog run will fix the problem. Also, the
912 authentication between the deamons is changed, so all daemons
913 must be simultaneously upgraded.
914 ==============================================
915 If you don't like this fix, set:
916 const bool compatible = true;
918 const bool compatible = false;
921 kes Ensure that DB signature is never NULL.
922 kes Ensure that DB table names are not translated.
923 kes Fix scheduler to handle time skew (eg daylight savings).
924 kes Fix scheduler to use lock_jobs() to avoid most problems
925 with reload. Window is now milliseconds.
927 kes Apply patch from Christopher Hull
928 kes Allow multiple connections to database with different
930 kes Invalidate the scheduler when doing a reload. Fixes seg
931 fault, but still 60 second window.
932 kes Additional info in Reschedule message.
933 kes Use set_jcr_job_status() everywhere to prevent loss of
935 kes Display peer IP in FD if error from connecting DIR.
936 kes Don't increment file count for DIRBEGIN.
937 kes Replace illegal characters in Win32 filename by _.
938 kes Add SE_CREATE_PERMANENT_NAME privilege in Win32.
939 kes Hash hard link filenames rather than linked list.
940 kes Fix for security failure in chdir on Win32.
941 kes Add CreateDirectoryA/W win32 API entry points.
942 kes Add /silent option to Win32 FD for Install/Remove service.
943 kes Always print Heap statistics in FD.
945 kes Remove the -f option from the chown in Makefile.in for more
947 kes Change setting the group in Makefile.in to use chgrp for
949 kes Implement a write_store and read_store to replace
950 dirstore in reserve.c
951 kes Implement a Bacula read/write lock for Python rather
952 than using the Python lock to avoid recursive problems.
953 kes Correct the uninstall directory names in filed/Makefile.in
954 as reported by a user.
956 kes Correct some problems with database creation (new tables).
957 kes Replace a bunch of old 0x%x by %p.
958 kes Get first cut of Migration with Job selection working.
960 kes Change store_bit() to store_bool() for the Spooling in
961 dird_conf.c -kes bug reported by Robert Nelson.
963 kes Correct Makefile bug found by Dan Langille.
965 kes Correct Makefile for Solaris /bin/sh
966 kes Correct mtx-changer.in for Solaris /bin/sh
967 kes Abort if a conf resource does not have a Name =
969 kes Change the name of the regex program to bregex.
970 kes Add the bwild program to the tools directory. It is similar
971 to the bregex program.
972 kes Implement create bregex.h and bregex.c in src/lib from the
973 Python regexp program.
974 kes Use the new bregex.c to implement Regex expressions on Win32.
976 kes More work on migration.
977 kes Implement wild program in tools directory for testing
978 wild-cards. Almost identical to the regex program.
979 kes Up port VSS single thread locking code.
980 kes Replace N_(..) by NT_(...) to inhibit translation of
982 kes Modify Makefile to change the permissions on Working Directory
983 to 770 if the directory is created.
984 kes Do not fail the Makefile if changing the permissions or
985 owner/group on WorkingDir fails.
986 kes Remove early selection of Scratch Volumes in the recycling
988 kes Correct the old recycling algorithm so that Scratch Volumes
989 are selected when looking for a Volume in the changer.
990 kes Correct a typo in the Verify SQL reported by Joe Park.
992 kes Remove automatic case folding on Windows FDs. You must
993 explictly use the 'Ignore Case = yes' option.
994 kes Remove the code added to 1.38.6 and 1.38.7 that pulls a
995 scratch volume in an Autochanger early in the 'recycling'
998 kes Make weof() and clrerror() methods of class DEVICE.
1000 kes Tweak license to include Microsoft restrictions.
1001 kes Move mysql.reconnect to after real_connect(). Thanks to
1002 Frank Sweetser for the patch.
1003 kes Disallow a backslash in a File = directive (Windows junk)
1004 unless the string is quoted.
1005 kes Apply Eric's patch to ua_label.c so that daemon protocol
1007 kes Add NT_ definition for strings that should not be translated.
1008 kes Apply NT_() to ua_label.c
1009 kes Remove timed wait for VSS on Win2K3 as it is not yet
1011 kes Correct bacula.in script to reference bacula-ctl-xx in the
1012 sysconfig directory rather than the bin directory.
1014 kes Fix a long standing bug in the bacula start/stop scripts.
1015 kes Attempt to add the new bacula-ctl-* files to the rpm.
1016 kes Switch to using typeof() for list traversing to avoid
1017 as many FC5 g++ compiler warnings as possible.
1019 kes Split the bacula start/start script into four files:
1020 bacula -kes starts and stops calling other scripts
1021 bacula-ctl-dir -kes starts/stops the director
1022 bacula-ctl-fd -kes starts/stops the File daemon
1023 bacula-ctl-sd -kes starts/stops the Storage daemon
1025 kes Create datestyle fix for PostgreSQL. Fixes bug #574.
1026 kes Correct editing of JobId from int to int64 in fd_cmds.c
1027 kes Eliminate FileSet name race with bash_spaces() and multiple
1028 threads by bashing in a local.
1029 kes Fix error return from 'use storage' to print a correct error
1030 message rather than nothing.
1031 kes Correct false re-read last block error message when two jobs
1032 are simultaneously writing at the end of a tape.
1033 kes Simplify exit conditions in the reserve.c code to avoid
1034 possible non-release of reservation_lock().
1035 kes Suffle lock order in reserve to avoid deadlock between
1036 reservation lock and device mutex.
1038 kes Initialize jcr mutex before first use. Thanks to Thorsten for
1039 tracking this down for me !!!! as it broke the Win32 build.
1041 kes Integrate addition of line count limitation to bsmtp -l from
1042 Sebastian Stark <stark at tuebingen.mpg.de>
1044 kes Implement regex test program in tools directory.
1045 kes Attempt to fix time problem with bsmtp with foreign langs.
1046 kes Add strip_trailing_newline() submitted by user.
1047 kes Implement regex matching in migrate.c
1049 kes Fix bug #537 to allow arbitrary time to mount a volume for
1050 restore, if polling is turned on.
1051 kes If dir_user or dir-group is specified in ./configure apply it to
1052 the working-dir. Fixes bug #533.
1053 kes If rescheduling a job cancel the previous incarnation with the SD.
1054 Fixes bugs #566 and 557.
1055 kes Fix bug #567 do_message() definition type conflict.
1058 kes Add more jcr methods and make mutex and use_count private.
1059 kes Create lock/unlock methods for jcr.
1060 kes Fix PostgreSQL bug doing sql_data_seeek() by explicitly reading
1061 records to get to seek position.
1062 kes Integrate patch from bug #561 to correct conio.c signal definitions.
1063 kes Fix Rescheduling failed Jobs. Ensure that SD message thread
1064 terminates correctly by doing pthread_kill(). Do not destroy
1065 SD cond wait variable between executions of the job. Use local
1066 mutex for cond variable to avoid blocking jcr chain. Fix poor
1067 use of jcr use count in jobq.c for restarted jobs.
1068 kes Fix obsolete usage of foreach_dlist() to use foreach_jcr() in
1069 lib/jcr.c -kes prevents locking the jcr chaing.
1070 kes Apply patch from bug #564, which corrects listing volumes with
1071 multiple autochangers. Apply same fix to next volume list.
1072 kes Fix bug #562 where restore bootstrap file is not unique.
1073 kes More details in implementing David's migration syntax proposal.
1074 kes Save and restore dcr when swapping drives so that if we have
1075 a write dcr it is not lost.
1076 kes Use new routine lock_reservations() to lock the reservations
1077 system, and call it while looking for a volume in askdir.c.
1078 This could possibly fix bug #543.
1079 kes Stop SD command loop if job is canceled.
1082 kes Remove old code from findlib/create_file.c
1083 kes Rename mac.c migrate.c
1084 kes Add user friendly display of VolBytes in job report.
1085 kes Rename target... to previous... to make it a bit easier to
1087 kes Add selection type and selection pattern to Migration (idea
1088 given by David Boyes).
1091 kes The po files should now be current.
1092 kes Fix new sql_use_result() code to properly release the
1093 buffers in all cases.
1094 kes Use the keyword ujobid to mean the unique job id; job or jobname
1095 to mean the Job name given on the Name directive, and jobid to
1096 be the numeric (non-unique) job id.
1097 kes Allow listing by any of the above.
1098 kes Add the user friendly job report code for reporting job elapsed time
1099 and rates with suffexes from John Kodis <kodis at comcast.net>.
1100 kes Add Priority and JobLevel as Python settable items.
1101 kes Use TEMPORARY table creation where the table is created by
1103 kes Add new code submitted by Eric for waiting on specific jobid.
1104 kes Add ACL checking for the dot commands.
1105 kes Fix restore of writable FIFOs.
1106 kes Fix a bug in bpipe where the string was freed too early.
1108 kes Modify the Python class examples to inherit object -kes new way
1109 of defining classes. Patch from Felix Schwarz.
1110 kes Implement jobuid to replace old usage of job in keywords as
1111 suggested by Eric Bollengier.
1112 kes Apply patch for enhancing wait from Eric Bollengier. On can now:
1113 wait (wait for all jobs to stop)
1115 wait jobuid=unique id
1117 kes Implement write variables for Python to set Priority (anytime), and
1118 Job Level, only during JobInit event.
1120 kes Fix the block listing bug pointed out by Arno.
1121 kes Update the po files at Eric's request.
1123 kes Fix Maximum Changer Wait, Maximum Open Wait, Maximum Rewind Wait to
1124 accept time qualifiers.
1125 kes Make catalog respect ACL.
1126 kes Add recycle count to Media record.
1128 Changes to 1.39.6-beta1 24Feb04
1130 kes Add Rudolf Cejka's new rc-chio-changer.
1131 kes Implement pulling Volume from Scratch Pool if the
1132 Volume is in the autochanger.
1133 kes Implement additional command arguments for update Volume.
1137 kes Back port changes to 1.38.5
1138 kes Fix recycle SQL for StorageId.
1139 kes Fix misplaced quote in mtx-changer script.
1141 kes Note. Your database must be updated, or you must create
1142 a new database. I have not yet incremented the database level.
1143 kes Add Location table.
1144 kes Add LocationId, DeviceId, and MediaTypeId to Media record.
1146 kes Implement create/get mac record in database for adding extended
1147 Migration data to the job record.
1148 kes Add new MAC table to update/make database scripts.
1149 kes Return Storage name used when getting VolumeNames for a job.
1150 kes Change bsr file keyword Storage to Device, which is more accurate.
1151 kes Ensure that Mac records are pruned/purged.
1152 kes Tweak SD tools to deal with changing media type.
1153 kes Integrate more dev.c subroutines as methods (e.g. strerror, bsr, ...)
1154 kes Pass pointer to dcr pointer to acquire_device_for_read() so
1155 that the subroutine can switch devices, and hence dcrs.
1156 kes Modify the multiple MediaType read code to re-use the same
1157 dcr when switching devices. This makes the code much more
1159 kes Integrate patch from Karl Hakimian that reads JobIds, FileIndexes
1160 from a table for restore.
1161 kes Add Storage name to VolParams, but it really should be Device.
1163 kes Add disk-changer to scripts directory + configure/Makefile
1164 kes Eliminate PoolId from jcr -kes it is in jcr->jr.PoolId
1165 kes Implement store_bit scanner to replace store_yesno. Mostly done.
1166 kes Implement new store_bool that stores in a bool.
1167 kes Add true/false to yes/no conf directives.
1168 kes Make first cut at changing appropriate store_yesno to store_bool.
1169 kes Complete implementation of Pool storage devices.
1170 kes Move starting clones to job.c
1171 kes Move create_restore_bootstrap_file() to job.c
1172 kes Make copy_storage() more general to be able to handle
1174 kes Cleanup a lot of migration code for manual running, including
1176 kes Move getting a scratch Volume into a subroutine.
1177 kes Make all places a Volume that is added to a pool to
1179 kes Fix bug in autochanger recycle code (improper edit 64 bit).
1180 kes Fix segfault in restore command when no value specified.
1181 kes Start adding code to handle multiple MediaTypes in restore.
1182 kes Eliminate race condition in getting Volume name for
1183 two drive autochanger.
1184 kes More debug code in autochanger.
1185 kes Add storage keyword to bootstrap file, add parsing.
1186 kes Move slot in bsr file into Volume record as there will be
1187 a different slot for each Volume.
1188 kes Create reserve.h
1190 kes Implement Pool storage overrides.
1192 kes Implement first cut of Migration.
1193 kes Implement mysql_use_result() from patch by Karl Hakimian.
1194 This reduces significantly the memory consumption during
1195 the restore tree building, and hence runs faster too.
1196 kes Implement StorageId patch supplied by user (reggie) in bug
1197 #536. This should permit Bacula to work correctly with two
1199 kes Implement Job listing variations suggested by a user.
1200 kes Move updating bootstrap code in backup.c to subroutine
1201 update_bootstrap_file().
1202 kes Add new job status elapsed time and bytes written user
1203 friendly job report output patch sent by John Kodis
1204 <kodis at comcast.ne>.
1205 kes Implement a storage list in Pools.
1206 kes Separate out setup_job() code from run_job().
1207 kes Get migration working -kes lots of changes in mac.c in both
1209 kes Apply patch from user (Eric Bollengier I think) that fixes a
1210 DIR crash when no arguments are supplied to a dot command.
1211 kes Fix typo (strcpy->strcmp) in ua_prune.c as reported by Martin.
1212 kes Fix command arg name->volume in label command of gnome-console.
1213 kes Fix SD acquire.c to release correct DCR by explicitly testing
1214 on the dcr address rather than trying to devine if it is a read
1215 or write dcr. This failed in error conditions when the device was
1219 kes Apply user supplied patch for more readable rate output
1221 kes Continue implementing migration.
1222 kes Implement support for removable filesystems in SD.
1223 kes Ensure that btraceback scripts can be read by anyone.
1224 kes Replace dvd-freespace and dvd-writepart by dvd-handler.
1225 kes Correct bug where canceling restore before the FD contacts
1226 the SD causes the drive to be left in read mode.
1227 kes Move ofline_or_rewind into DEVICE::close().
1228 kes Eliminate close_device.
1229 kes Convert several dev subroutines to methods (e.g. bsf,
1231 kes Eliminate force_close_device().
1232 kes Implement Device Type directive in Device resource that
1233 can have values File, Tape, Fifo, DVD, or Prog.
1234 kes Add has_cap() method to Device.
1237 kes Add patch from bug #527 to allow RedHat user to specify
1238 options/user/group for starting each daemon in
1239 /etc/sysconf/bacula.
1241 kes Add two new queries to query.sql provided by Arno. One
1242 list volumes known to the Storage device, and the other
1243 lists volumes possibly needing replacement (error, ...).
1245 kes Add periodic (every 24 hours) garbage collection of memory
1246 pool by releasing free buffers.
1248 kes Correct bug counting sized (for display only) in smartall.c
1249 kes Print FD mempool stats if debug > 0 rather than 5.
1251 kes Make db_lock() mutex error fail the job rather than abort
1252 Bacula. Canceling the job caused the mutex to fail.
1253 kes Correct bug in alist.c that re-allocated the list if the
1254 number of items goes to zero.
1255 kes Move the reservation system thread locking to the top level
1256 so that one job at a time tries all possible drives before
1258 kes Implement a reservation 'fail' message queue that is built
1259 and destroyed on each pass through the reservation system.
1260 These messages are displayed in a 'Jobs waiting to reserve
1261 a drive' list during a 'status storage='. Note, multiple
1262 messages will generally print for each JobId because they
1263 represent the different problems with either the same drive
1264 or different drives. If this output proves too confusing
1265 of voluminous, I will display it only when debug level 1
1266 or greater is enabled in the SD.
1268 kes Add enable/disable job=<job-name>. This command prevents
1269 the specified job from being scheduled. Even when disabled,
1270 the job can be manually started from the console.
1271 kes During 'update slots' clear all InChanger flags where the
1272 StorageId is zero (old Media records).
1274 Beta release 1.38.4:
1276 kes Fix autochanger code to strip leading spaces from returned
1277 slots number. Remove bc from chio-changer.
1278 kes Back port a bit of 1.39 crypto code to reduce diffs.
1279 kes Fix first call to autochanger that missed close()ing the
1280 drive. Put close() just before each run_program(). Fixes
1283 kes Add PoolId to Job record when updating it at job start time.
1285 kes Pull in more code from 1.39 so that there are fewer file
1286 differences (the new ua_dotcmds.c, base64.h, crypto.h
1287 hmac.c jcr.c (dird and lib) lib.h md5.h parse_conf.c
1288 util.c. Aside from ua_dotcmds.c these are mostly crypto
1290 kes Implement new method of walking the jcr chain. The
1291 incr/dec of the use_count is done within the walking
1292 routines. This should prevent a jcr from being freed
1293 from under the walk routines.
1298 kes Start implementing Verify list output.
1299 kes Move the suitable_drive flag to a better place to prevent
1300 premature termination of the reservation if all drives
1301 are busy -kes should fix Arno's diff/inc pool failures.
1303 kes Add mutex to single thread VSS code in Win32.
1305 kes Simplify code in askdir.c that waits for creating an appendable
1306 volume so that it can handle multiple returns from the wait
1308 kes Modify the wait code to permit multiple returns.
1309 kes Return a zero when 'autochanger drives' is called and
1310 it is not an autochanger.
1311 kes Make rewind_dev() a method taking a DCR as an argument.
1312 This permits closing and reopening the drive if the
1313 rewind fails as happens if the drive was loaded while the
1314 file descriptor was open. This refreshes the file descriptor.
1315 kes Remove the ST_OPENED flag and always rely on fd < 0 for knowing
1316 if the device is open or not. This should eliminate
1318 kes Return error if reserve cannot find at least one suitable device.
1319 kes Make wait_for_sysop() return correct state information.
1320 kes Fix Win32 state file problem. write was not using compat
1321 code. This should fix bug #500.
1323 kes Modify gui on command to set only GUI mode and not batch.
1324 kes Modify .messages command to always print messages regardless
1326 kes If GUI mode is on, suppress automatic printing of
1328 kes Delete old bnet packet code.
1329 kes Ignore new BNET_START_SELECT and BNET_END_SELECT signals in
1330 wx-console. -kes not implemented because bconsole must be updated.
1331 kes Modify restore command in wx-console to set gui on and to use
1332 only .messages instead of messages. Hopefully this fixes bug
1334 kes Fix seg fault in exit of acquire when canceling a job --
1335 reported by Wolfgang Denk
1336 kes Pull in latest reservation system changes from 1.38
1337 kes Make .messages command always print messages regardless
1338 of the automessages flag.
1340 kes Fix seg fault if user labels a drive directory bug #513
1341 kes Remove quotes around Version as it breaks things.
1343 kes Merge in Aleksandar Milivojevic's mods to the spec file.
1344 kes Apply sparse code fix for raw drives and fifos. Bug 506
1345 kes Thorsten fixed Unicode cd problem with wx-console bug 505.
1347 kes Correct reservation system to do a last ditch try
1348 for any mounted volume, then anyone anywhere.
1349 kes Add quotes around table Version because of
1350 error in MySQL 4.1.15 -kes bug report submitted.
1351 kes Correct some minor problems with btape in the fill
1353 kes Updates to ssh-tunnel from Joshua Kugler.
1354 kes Added a report.pl program from Jonas Bjorklund.
1355 kes Simplify the O_NONBLOCK open() code for tape drives,
1356 and always open nonblocking.
1357 kes Do not wait for open() if EIO returned (shouldn't happen).
1358 kes Eliminate 3 argument to tape open().
1359 kes Correct the slot # edited in the 3995 Bad autochanger unload
1361 kes With -S on bscan (show progress) do not divide by zero.
1363 kes Make cancel pthread_cond_signal() pthread_cond_broadcast().
1364 kes When dcr is freed, also broadcast dev->wait_next_vol signal.
1365 kes Remove unused code in wait_for_device.
1366 kes Make wait_for_device() always return after 60 seconds of wait.
1370 kes Add stubs for non-crypto build.
1372 kes Use localhost if no network configured
1374 kes Eliminated duplicate MaxVolBytes in cat update -kes bug 509.
1375 kes Remove debug print.
1376 kes Add bail_out in error during state file reading.
1378 kes Merge changes made to 1.38.3 into HEAD
1379 kes Add stubs for pygtk-console code
1380 kes Create Makefile.in for pygtk-console code
1382 kes Merge updates into 1.38 branch
1383 kes Update specs to include mysql4 define.
1384 kes Fix when attributes are sent, must be after binit().
1385 kes Stop read_record() if status not ok in second loop.
1386 kes Return rec->FileIndex in dcr->VolLastIndex for normal
1387 and partial records in read_record(). This allows bscan
1388 to get FileIndex at EOT correct.
1389 kes Fix butil.c to correctly set dcr -kes fixes seg fault in bls.
1391 kes Fix Win32 built to work with new crypto code.
1392 kes Apply patch supplied by user (slightly modified) to fix
1393 correct detection of holes in block devices and FIFOs.
1395 kes Apply patch supplied by user (slightly modified)
1396 to fix SD hang with multiple pools and bad client
1397 IP. Fixes bug # 508.
1399 kes Add nagios plugin to the examples directory. Submitted by
1401 kes Remove warning message about multiple saves of hardlinked files
1402 from find_one.c as it can generate too many warning messages.
1403 kes Modify most restore error messages to be queued so that they
1404 appear at the end of the job rather than mixted with the restore
1405 listing where they could be 'lost'.
1407 kes Reset timeout values before select() per patch from
1408 Frank Sweetser for problems with non-blocking sockets.
1409 kes Unlink the state file if either reading or writing it gets
1410 errors. Hopefully this will fix Win32 exit problems.
1411 kes Add sanity check in append.c to ensure that dcr is not NULL.
1412 This can happen if multiple drive autochanger SCSI control
1413 channel and drive indicies do not correspond.
1415 kes Get next volume from Scratch pool before creating a volume.
1416 kes Set new Pool defaults in Vol when moved from Scratch Pool.
1417 kes Remove argument from create_bacula_database for SQLite as it
1419 kes Add back index code so that two drive autochangers can get
1421 kes Change a bunch of debug levels to aid debugging autochangers.
1422 kes Fix reservation so that mutexes are properly applied.
1423 kes Rework reservation algorithm so that two drives can be used
1426 kes Landon merged his data encription changes into the HEAD
1427 kes Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
1428 If this patch is applied, the number of days can be specified with
1429 'list nextvol days=xx'
1431 'status dir days=xx'
1432 My use case is to be able to preview the next scheduled job (and the
1433 next tape to be used) on fridays if there are no scheduled jobs during
1437 kes Fix font code in gnome2 console user patch. Fixes bug #501.
1438 kes Fix malformatted bnet error message that caused seg fault
1440 kes Applied user patch to improve README.vc8 in src/win32.
1442 kes Add Migrate, Copy, Archive Job types (some where there)
1443 kes Correct some more editing of JobId's (for 64 bit compatibility).
1444 kes Ensure that StorageId is stored in Media record when ever possible.
1445 kes Add Migration Job to Job.
1446 kes Add Migration Time, Migration High Bytes, Migration Low Bytes
1447 Next Pool to Pool resource.
1448 kes Add more code to mac.c (migration archive copy).
1449 kes Change Start Storage daemon job to require read and write storage
1451 kes Pass read storage data to SD as well as write storage data.
1452 kes Remove old code from winservice.cpp
1453 kes Break on error in scan.
1454 kes Fix typo in signal.c
1455 kes Separate read/write DCR in SD. Add jcr->read_dcr.
1456 kes Cleanup how find_device() works.
1457 kes Add read output to Status in SD.
1460 kes Add red-black btree routines
1462 kes Remove abs() in bfile.c so that it compiles on Solaris.
1465 kes Fix crash in tray-monitor when daemon disconnects. Bug #479.
1466 kes Fix bnet-server bug found on OpenBSD. Bug #486
1467 kes Fix cancel failure bug. Bug #481
1468 kes Fix failure when Pool name has spaces. Bug #487
1469 kes Fix SD crash in autochanger code. Mutex failure. Bug #488
1470 kes Fix a couple of free()s in src/filed/acl.c
1471 kes Fix memory overrun in bfile.c in building OS X resource
1472 fork filename. Bug #489
1473 kes Add Pool name to SD status output.
1475 kes Apply SunOS patch for ACLs submitted by David Duchscher.
1476 kes Make sure to set storage before trying to set drive.
1477 kes Add bacula_mail_summary.sh to examples directory. It makes
1478 a single email summary of any number of jobs. Submitted
1480 kes Make sure when we do a mount to unblock the device even
1481 if the drive could not be opened.
1483 kes Remove the USE_WIN32STREAMEXTRACTION #defines (always on)
1484 and correct a few minor problems to make it build on Linux.
1486 kes Remove delete of CVS from all Makefiles
1487 kes Fix seg fault when clicking on Add button in wx-console
1488 restore panel. Bug #470.
1489 kes Fix copyright date and URL typo -kes bug #468.
1490 kes Change autostart install for FreeBSD to look for rc.conf
1491 rather than rc.local as suggested fix for bug #466.
1492 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1493 grant on status. Bug #465
1494 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1495 update script. Bug #464
1496 kes Tweak #ifdefing a bit in new Win32 stream code.
1497 kes Fix #ifdeffing for FD_NO_SEND_TEST.
1498 kes Add documentation of performance #defines
projects / bacula / bacula / blob