1 Technical notes on version 1.39
5 kes Separate read/write source strings to keep track of where
6 storage devices are used in a job.
7 kes Implement a new method of keeping track of which storage
8 device is used in a Job. USTORE keeps both a pointer to the
9 resource and to the source string.
10 kes Modify all code to use new storage set subroutines in job.c
11 kes Modify migrate.c so that the definitive selection of the storage
12 resource is done in the do_migration_init() routine prior to
13 the job going into the job queue. This permits accurate
14 deadlock detection (same read and write storage resource).
15 kes Remove bfill from btape (I think it was a left over stub).
17 kes Make sure that the storage for a job is pulled first from
18 the Pool and if not from the Job.
19 kes Ensure that either the Pool or the Job specifies a Storage
22 kes Start applying new FSFE copyright.
24 kes Add additional error messages in acquiring a drive for read.
25 kes Make WritePartAfterJob the default so that the last DVD part
26 always gets written to the DVD by default.
27 kes Add additional error messages in migration.
28 kes Suppress redundant error messages in migration (possibly more to do).
29 kes Apply Martin's fix (updated to 1.39) that takes into account
30 run storage overrides in the Director status display.
31 kes Implement, but turn off the submitted code that sets the EOT
32 model on FreeBSD machines. Turning on this code is too risky at
33 this point in the development.
35 kes Implement unique dbid routine for migration to prevent the same
36 JobId from being migrated twice. This should fix bug #709.
38 kes Apply Jaime Ventura's 'mail on success' patch.
39 kes Add a SMALLOC_SANITY_CHECK for Arno, which aborts Bacula
40 if memory usage gets too big.
41 kes Tweak migration to ensure that read/write devices are different.
43 kes Create an AUTHORS file to list Bacula contributors.
44 kes Add Richard Stallman's four GPL freedoms to LICENSE
45 kes Require the conf file to have a valid NextPool for writing the
48 ebl Enable RecycleCount in catalog.
49 ebl Fix "echo python | bconsole" segfault
51 kes Implement code to pass the MediaId to the SD. The SD then uses
52 this MediaId when creating JobMedia records. This fixes a bug
53 with Migration where the MediaId got set to the second Volume
54 read rather than the write Volume. Possibly (unlikely) fixes
56 kes Remove NextPool from Job resource.
57 kes Edit a few numbers in the restore dialog with commas.
58 kes Note, the DIR<->SD protocol has changed.
60 kes Replace () by {} in configure.in for proper HP configuration.
61 kes Shorten some lines over 80 characters in filed/backup.c
62 kes Cast sizeof() in filed/backup.c to avoid compiler warning.
64 Version 1.39.28 released:
66 kes Change error message 'illegal' to 'invalid' -- bug #707
67 kes Add rather primitive device resource deadlock detection in
68 the job queue handler. It detects the same read and write device
69 for migration and cancels the job.
70 kes Start adding a unique_dbid_hander() routine in migration to avoid
71 duplicate mediaids and duplicate jobids.
72 kes Add patch from bug #708 to permit relative paths such as ../xxx
73 in the restore tree routine.
74 kes Add Eric Bollengier's patch to reduce locking time in the SD after
75 despooling, and thus many jobs finish faster.
76 kes Correct locking order of reservations lock and device mutex in
77 reserve.c -- this should correct Arno's deadlock that occurred
78 when doing mount/unmount at the same time a job is reserving a
81 rbn Fixed problems with encryption when combined with compression
82 or sparse files. Unfortunately this means that all previous
83 encrypted backups can't be restored.
84 rbn Fixed problem in bfgets with Windows and Mac end of lines.
85 rbn Fixed bug in Windows version of close_bpipe() that cause programs
86 like bsmtp() to hang waiting for the pipe to be closed. Fixed
87 binary file type problems in open_bpipe().
88 rbn Fixed a number of bugs in the mysql DB scripts.
90 ebl Fix broken runscript on director. (RunBefore, RunAfter)
91 ebl Use M_ERROR instead of M_FATAL in runscript.c
93 ebl Small fix src/dird/job.c to add JobErrors count to catalog.
94 rbn Ignore UTF-8 marker at the start of .conf files.
95 rbn Add stab2cv to 3rd party dependencies. This is a utility I
96 wrote that is licensed under the GPL and available on SourceForge.
97 It converts the stab debugging info generated by gcc into Codeview
98 format. Currently it just translates function names to global
99 symbols. This is sufficient to get reasonable stack traces from
100 Dr Watson and to look at minidumps.
101 rbn Fix bug # 699 - winbacula client crashes whilerunning bat scripts.
102 rbn Enable Windows XP look and feel for the tray icons and wx-console.
103 rbn Add Windows specific FileSet example to bacula-dir.conf.
104 rbn Reorganize Start menu so that documentation and configuration are
107 rbn Change daemons and utilities so that if -c is omitted from the
108 command line AND there is no configuration file in the current
109 directory then the 'standard' configuration file (eg
110 /etc/bacula/bacula-*.conf) will be used. If the argument to -c
111 doesn't contain any path separators AND there is no configuration
112 file by that name in the current directory then the 'standard'
113 configuration file directory will be searched for a file by that
115 rbn Fixed restore on Windows so that backslashes as path separators works.
116 rbn Add missing query.sql file to Windows installer.
117 rbn Fixed Windows versions of catalog backup scripts.
119 kes Fix optional files in Makefile.in of src/filed that caused
120 a syntax error when using no optional files.
122 lf Fix a cosmetic bug in filed.c that caused spurious OpenSSL error
123 messages; there is no reason to attempt to load a private key.
124 from master key files.
126 Version 1.39.26 released:
128 kes Apply the three patches from Richard Mortimer.
129 bacula-reposition.patch, bacula-tape-reopen.patch, and
130 bacula-eod.patch. This corrects tape positioning on older devices,
131 and also a problem with btape.
132 kes Apply fix from bug report #696 where writing to a FIFO does not
133 work due to a dumb typo.
134 kes Unlock the tape door before the file descriptor is released. This
135 should fix lots of somewhat subtle failures when using an autochanger.
137 kes Correct mtx-changer bug that I introduced in a recent commit, and
138 pointed out by Robert Nelson -- thanks.
139 rbn Fix Windows' daemons so that messages print to stdout if not
140 running as a service.
141 rbn Add daemon name to trace file name (eg bacula-dir.trace).
142 rbn Fix environment variable expansion in directory names on Windows.
143 rbn Fix autochanger support in fill command.
144 rbn Update SQL scripts to match Unix versions.
145 rbn Fix daemon usage displays.
146 rbn Cleanup bacula-dir.conf template.
147 rbn Install openssl.cnf so that the openssl.exe installed in the
148 Bacula\bin directory can be used to generate keys and
149 certificates for TLS and encryption.
150 rbn Fix cleanup of spool files on Windows.
151 rbn Remove /silent option from daemons on Windows. The new default
152 is the same as the old /silent. To enable the message boxes that
153 previously were suppressed by /silent you must add /debug instead.
154 NOTE: As a result of this change, the first time you upgrade from
155 a previous version of 1.39.x you will receive the message
156 boxes when the remove of the old services succeeds. This
157 is the same behaviour as when migrating from a version prior
159 However, going forward, these message boxes will not appear on
160 upgrades or new installs.
161 rbn Add new /debug option. This option enables the message boxes that
162 previously were suppressed by the /silent option. In addition the
163 daemons running as services will open a console window if this
165 rbn Fix bug with service not being removed on migrated installs. This
166 should correct those cases where the file daemon install was failing
167 when upgrading from versions prior to 1.39.x.
169 kes Turn on heap reporting in Dir with zero debug level.
170 kes Send a message to the sys log when Bacula forces a SEG FAULT, and
171 send the same message to stdout.
173 kes Begin work on new GUI 'console'.
174 kes Make configure look in non-standard MySQL library directory
176 kes Make mtx-changer automatically configure the autochanger wait
177 procedure for Solaris, FreeBSD, and Linux. Previously, only Linux
179 kes Correct drop_sqlite_tables.in script to not delete the database.
180 kes When writing to a log file, close and reopen the file descriptor
181 if there is an error writing the file.
182 kes Modify the autochanger loaded?, load, and unload commands to print
183 the full text of any mtx output if there is an error. Helps to
184 ease diagnosis of autochanger problems.
185 kes Correct a few Win32 errno returns in the VSS code so that hopefully
186 a resonable Win32 error message will be printed.
187 kes Convert a few strcat()... to bstrncat() in the Win32 code.
189 rbn Added Windows version of bsmtp.
190 rbn Fixed path search for Windows so that Bacula\bin is automatically
191 searched for programs and scripts.
192 rbn Fixed bugs in mtx-changer.cmd and made template bacula-sd.conf
195 Version 1.39.24 released:
197 kes Apply dvd find volume patch from Richard Mortimer.
198 kes Eliminate the dvd specific mount routines using only the
200 kes Make update_free_space a method of DEVICE and rename
203 kes Require a messages command acl to be able to receive messages
205 kes Add console, system, and scan job types in util.c.
207 kes Print the Volume purged message only for real jobs to keep
208 from cluttering up the daemon messages.
209 kes Lock the tape drive door while Bacula is using the device.
210 kes Add back the 'No Jobs running' message to FD and SD status because
211 my regression script depends on it, and I'm too lazy to change the
213 kes Start using structure assignments (not too happy about it ...).
214 kes Fix a bug in the tools Makefile that broke on Solaris.
215 kes Unload any autochanger drive during a 'release' command.
217 kes Enhance error message when restoring without bootstrap file.
218 kes Check restored size only for regular files.
219 kes Store Python job level in job record in Dir.
220 kes Add back code to open tape device nonblocking, but if rewind fails
221 release file descriptor.
222 kes Modify acquire.c to first try autoloading the device. Also, ask operator
223 to mount tape if drive cannot be opened.
224 rbn Made Windows service tray status windows resizable.
225 rbn Fixed horizontal scrolling of text in status window.
226 rbn Preserve horizontal and vertical scroll position while
227 updating. This prevents the display being reset to the
228 top line every 5 seconds.
229 rbn Fix Windows cross-compile compatibilty problems with
230 *nix variants such as OS X without the zic command.
231 rbn Eliminate dependency on man2html.
233 kes Update src/win32/dll/bacula.def for change in BPIPE definition for
235 kes Fix a compiler warning in compat.cpp
236 kes Change strcpy to bstrncpy in compat.cpp
237 kes Remove some broken code in bdb_list.c
238 kes Fix, hopefully the last, ACL problem in the restore command.
239 kes Update the README.mingw32
240 kes Add new version of upgrade-win32-client.txt to examples directory.
241 Submitted by Michel Meyers.
242 kes Print an INFO message in the job report when a Volume is marked Purged.
243 rbn Fixed handling of external program and script execution
244 so that the format of the command line is more flexible.
245 Now executable path names containing spaces are translated
246 to the equivalent short name automatically. The result is
247 passed to cmd.exe with the quotes removed.
249 kes Apply the recycle patch from Richard Mortimer.
250 kes Convert a few if statements in dev.c to switch statements.
251 kes Start using print_errmsg instead of bstrerror().
252 kes Print a job message in SD when a job is marked to be canceled.
254 kes All code added back. Fixed block.c read/write to loop only 3
255 times. This apparently keeps the OS from crashing (at least
257 kes The kernel bug still persists. Backup something then immediately
258 do a bscan on the same tape, and the kernel will crash.
259 kes Simplifed tape open(). It no longer uses nonblocking mode, which
260 means that opening with no tape loaded will probably take at least
261 6 minutes before an error is reported.
262 kes Do not use MTSETDRVBUFFER if not running as root. Do a MTRESET
263 when doing set_os_device_parameters.
264 kes Report open error in mount.c
265 kes Remove all .exe files from the installer directory on make clean.
267 kes Start adding back removed code.
268 kes Back out a number of changes because backups to tape crash my
270 kes Remove the inetd code from the File daemon.
272 kes Add -c option to pg_dump so that it initializes tables when
274 kes Fix FirstWritten time on Volume to be obtained from SD so that
275 it is the actual time the volume was first written.
276 kes Minor Makefile changes.
277 kes Handle EBUSY during read(). Improve how EBUSY is handled in write().
278 ebl Add yes keyword to prune/purge command
280 kes Correct a test in block.c that prevented restore of a DVD from
281 looking at the last part in the spool directory.
282 kes Make some error messages clearer mostly by using the word DVD
283 in the message. Improve infor message in read_record for DVDs.
284 kes Remove DVD kludges in dircmd.c label/relabel.
285 kes Move the dvd relabel code from dircmd.c into
286 write_new_volume_label_to_dvd() adding a relabel argument.
287 kes Rewrite the truncate_dvd() code to be much simpler and
288 more logical. First blow away any spool part, then create a
289 new empty part and write to the DVD.
290 kes Rewrite the can_write_on_non_blank_dvd() code making it
291 only ensure that no valid data is on the DVD -- i.e. it
294 kes Minor Makefile fixes.
295 kes Put attach_dcr_to_dev in a subroutine.
296 kes Make attaching/detaching to/from a device use a flag and
297 only detach if actually attached.
298 kes Add dvd-simulator.in to scripts directory and add to configure.
299 kes Fix code in acquire.c that checks fd != 0 to use dev->is_open().
300 This could be a cause of a number of drive reservation problems.
301 Note, this code is now in attach_dcr_to_dev().
302 kes Suppress doing Volume updates if it is a system job. This should
303 prevent the DVD label blocking.
304 kes Clear the freespace ok flag in a couple of strategic places.
306 kes Put removing zero sized spool part file in subroutine and
307 call from release_device().
308 kes Add Richard's patch for relabel to dircmd.c, but save and restore
310 kes Rework a lot of subroutines in dev.c to take dcr as an
311 argument. This is done to eliminate the usage of attached_dcrs
313 kes Change truncated_dvd to blank_dvd, which seems more suitable.
314 kes Apply most of Richard Mortimer's truncate patch.
315 kes Create lseek() method for DEVICE that takes dcr as an
316 argument. This is to eliminate the use of attached_dcrs in
317 lseek(). The calls to lseek_dev() must still be changed.
319 kes Apply Richard Mortimer's patches for printing an error
320 message in btape when a DVD is used, and to initialize traceback.
321 kes Added error message to btape when trying to access a file.
322 kes Move prototype of update_slots() to protos.h.
324 kes Add JobErrors, JobFiles, SDJobFiles, SDJobErrors, SDJobStatus,
325 and FDJobStatus to the Director Python variables.
326 kes Make sure valid argument passed to str_to_utime() where Arno
328 kes Apply Richard Mortimer's patch for bcopy, bextract, and bscan.
329 I.e. part of two different patches.
331 kes Modify disk changer to simulate some of the error conditions
333 kes Make sure the close() call in the SD tools is just before the
335 kes Implement dir_get_volume_info() in bls using the patch from
336 Richard Mortimer but call find_num_dvd_parts().
337 kes Implement find_num_dvd_parts() that mounts and scans a DVD
338 and counts the parts.
339 kes Move the omode code in open_dvd() up so that the cannot
340 write on blank disk can check can be bypassed for read mode.
343 kes Disable normal data spooling for DVD writing which uses
344 a different spooling mechanism.
345 kes Apply patch from Richard Mortimer to ensure that the number
346 of DVD parts is correctly updated.
347 rbn Save installer details log in the Bacula directory as
349 rbn Add installer generation of client and storage templates
350 suitable for @inclusion on the director.
351 rbn Mark previously installed Win32 components read-only since
352 deselection doesn't do anything.
354 Version 1.39.22 beta released:
356 kes Fix logic error in handling error return from mtx-changer
358 kes Make status from SD aware of -1 (unknown) Slot status.
359 kes At Eric's suggestion make both the 'slots' and 'drive' commands
360 to the Storage daemon work even if the drive is busy.
361 kes Make two separate Win32 menu links for starting bconsole and
362 wx-console in winbacula.nsi
363 kes Apply DVD part_spooled patch from Richard Mortimer
364 richm@oldelvet.org.uk
365 kes Put installer/Readme.txt into Win32 EOL format for Notebook.
366 rbn Fixed problems migrating settings from previous releases in
367 Win32 installer. Add Readme.txt with an option to show it on
368 the installer Finish page.
370 kes Use get_catalog_resource() to open catalog database
371 to ensure that ACLs are respected and that user is
372 correctly prompted for database.
373 kes Integrate multiple console/director patch from
374 Carsten Paeth calle@calle.in-berlin.de
375 ebl Add character substitution in Job/JobDefs WriteBootStrap.
376 You can use now 'WriteBootStrap = '/path/%c_%n.bsr''
377 kes Apply patch supplied in bug #656 to pass priority field
378 in the run dialog to the Director in gnome console
379 kes Restore DCR after VOL_NAME_ERROR in mount.c. Hopefully
380 this will fix bug #627 where Bacula eventually gets
381 confused about what Volume it wants.
382 kes Add a new close_part() class in the SD to save the device
383 state around open/close_part/open for DVD writing. This
384 should fix the num_dvd_parts getting zeroed as reported by
386 kes Apply patch from Richard Mortimer that correct edit code
387 for debug output of st_size.
388 ebl Add support of encrypted data stream to bscan.
389 display data_len instead of data content (may be binary)
391 kes Add dev->close() in dir_ask_sysop_to_mount_volume() in
392 bcopy. Fixes bug #669 reported by Eric.
393 kes Fix incorrect number of arguments in SQL statement in
394 sql_get.c as reported by Eric.
396 kes Update examples directory.
397 kes Remove unused variable in winservice.cpp
398 kes Make Win32 make command build installer.
399 rbn Add new Install Type page, used to select between Automatic
400 and Custom installs. Automatic installs only prompt for
401 configuration items that can't be reasonably defaulted.
402 rbn Added Bacula logo to page headers.
403 rbn Added Upgrade support
404 - Configuration and component selection are migrated from
406 - Configuration of upgraded components is preserved and
408 - Configuration of new components is handled according to
409 the Automatic / Custom selection.
410 - Component selection is defaulted to previously selected
412 rbn Installation of Server components is disabled on
413 Windows 95, 98 and ME.
414 rbn Added URLs for support, info and upgrades to Bacula entry
415 in Add/Remove Programs.
416 rbn Added Version info to Bacula entry in Add/Remove Programs.
418 kes Correct dvd code that breaks tape labeling.
419 kes Implement Enabled on update slots.
421 kes When doing a label, pass the VolBytes back to the Director,
422 which puts it in the catalog.
423 kes Print an error message if the user attempts to prune an
425 kes Need to start using %ld when sscanfing 32 bit values.
427 kes Correct the counting of VolCatBytes for DVDs.
428 kes Add code to mount.c to require that VolCatBytes corresponds to
429 what is actually found when doing an append.
430 kes Update freespace only after writing on the DVD.
431 kes Remove code that blows away the current part in the spool file.
433 kes Apply new dvd-handler patch from Richard Mortimer.
434 kes Tweak so that debug level 20 shows only DVD commands.
435 kes Correct spooled_part flag in dev.c close() so that it is cleared
436 when the spool file is deleted or does not exist.
437 kes Print part number in read_records when eof hit (restore).
438 rbn Installer default changed to start services on new install.
440 kes Make find with no args in tree restore return error rather than
441 stopping the selection. Fixes bug #665
442 kes Rework DVD writing to ensure that the last part is written
443 on open_next_part when dealing with a spool file.
444 kes Correct the lseek_dev() routine to handle end point correctly
445 (bug introduced by me).
446 kes Allow part number to exceed num_dvd_parts in lseek_dev().
447 rbn Change make_session_key on Windows to use WIN32 APIs to produce
449 rbn Add new tool scsilist.exe which displays the changer, tape and
450 CD/DVD (1394, SCSI, SATA, ATAPI) devices and the information required
451 to add them to bacula-sd.conf.
453 kes Apply dvd-handler patch from Richard Mortimer.
454 kes Apply dvd error check patch from Richard Mortimer.
455 kes Apply bpipe race patch from Richard Mortimer.
456 kes Rework how DVD labels are handled and set append only
457 when part > num_dvd_parts.
459 kes Rework many features of DVD writing and reading. Added many error
460 messages. Most importantly changed part to represent the current
461 part number base zero. This makes current DVD writing incompatible
462 with previous version.
464 kes Add host:port to connect failure messages to FD and SD from Dir.
465 kes Add WhereACL to console ACL list. If nothing is specified, only
466 the default is permitted for restore. Otherwise, *all* allows any
467 path, or you can specify permitted paths. This should allow control
468 over where users can restore files. This is untested.
469 kes Modified message to add a ? (as in loaded?) when querying the autochanger
470 for what Slot is loaded.
471 kes Fixed the use of Slot, so that is more correctly maintained, thus
472 eliminating unneeded duplicate calls to determine what Slot is loaded.
474 kes Install man pages with 'make install'
475 kes wx-console crashes because of differences between Bacula and wxWidgets
476 malloc()/free(). Tweak wx-console to use bmalloc()/bfree() for Bacula
478 kes correct improper indenting in wx-console/console_conf.c
479 kes update wx-console header copyrights
480 kes Fix bug #658 where wx-console mangles file/directory names containing
483 kes Add Media.Enabled flag to client backups for dotcmds.c
484 kes Enforce Media.Enabled=1 for a current restore to work.
485 kes Require restore case 3 to have sqlquery permission to work.
486 kes Remove obsolete del_MAC sql command.
487 kes Ensure that bscan creates Volumes with Enabled=1.
489 Version 1.39.20 beta released:
491 kes Correct missing Client table reference in SQL pointed out by
494 kes Fix Win32 build (new entrypoint, start baculafd).
496 kes Add -n option to bconsole to turn off conio.
497 kes Print JobIds to be migrated in Job Report.
498 kes Add additional user supplied notes to the messages part of
499 bacula-dir.conf concerning multiple email addresses.
500 kes Fix an incorrect comment pointed out by a user in dvd_handler.in
501 kes Add more recent Feature requests to Projects file.
503 kes Apply Maritn's fix to src/win32/Makefile.
504 kes Apply Martin's fix to configure.in for pthreads on FreeBSD 4.x
505 kes Implement pruning for Migration and migrated jobs.
506 kes Implement PoolOccupancy migration.
507 kes Implement PoolTime migration.
509 kes If doing a mount, look for a slot, and if specified pass it to
510 the SD so that it can load the autochanger.
511 kes Return DVD=1 flag if a label command is done to a DVD. This
512 permits setting VolParts to 1.
513 kes Apply DVD patch from Richard Mortimer <richm@oldelvet.org.uk>, but
514 rework ua_label code based on DVD media type to use DVD flag returned.
516 kes Eliminate some compile warnings in dird_conf.c
517 kes Format the bytes field in the terminated jobs part of the status
518 command for the three daemons with suffixes to reduce print size
519 of backup bytes. Suggested by a user.
520 kes When not descending into a directory, print the File= name that
521 triggered it -- makes why not descending a bit clearer.
522 kes Do not unload autochanger when doing a list command -- basic code
523 from Eric Bollengier.
525 rbn Reworked the MinGW32 build-dependencies script, it has been renamed
526 to build-depkgs-mingw32. It now handles two options -h to display
527 help and -C to reextract the source and apply the patches. The -C
528 option is useful for updating the source after new patches are
530 rbn Moved the 3rd party package URLs to a separate file External-mingw32.
531 This allows updating to new versions without having to modify the
532 script and makes it easier to figure out which packages and which
534 rbn Added a new script build-depkgs-msvc.cmd which does the same thing
535 as build-depkgs-mingw32 except they are built using Microsoft Visual C
536 and placed in the depkgs-msvc directory. There is also an
537 External-msvc file to describe the packages.
539 rbn Fix Windows cross-compile compatibilty problems with FreeBSD.
541 kes Fix bug #462 incorrect error message printed when client script called
542 from File= was not found.
543 kes Fix bug #558 (waiting for feedback) where Bacula needs too much time to
544 do a rewind on Solaris when no tape is in the drive (Solaris does not
545 have the detailed errno found on Linux). Added Solaris specific code.
546 Note, this may apply to other OSes as well.
548 kes Defined BUILDING_CATS in src/cats/cats.h so that *nix builds.
549 dsb Updated rpm spec for 1.39 - updatedb 9 to 10, add new man pages,
550 fix bug 648 - update sqlite script patches, lock out gnome2console
551 builds for platforms with gtk+ < 2.4.
552 Updated build_rpm.sh - add remote source directory, add switch for
553 signing, refine file names.
554 Updated spec file again for Mandriva build as they have this curious
555 custom of silently converting all manpages to bzip2 format just before
556 the final packaging step.
558 rbn Fixed the Windows Makefiles so that they won't accidentally try and
559 pickup binaries for the Unix build. This allows both the Unix
560 build and the Windows build to be built in the same tree without
561 interfering with each other.
562 rbn Fixed error handling and cleaned up mtx-changer.cmd.
563 rbn Added the rest of the database scripts. These are installed but are
564 not yet edited for variable replacement.
565 rbn Broke out the cats functionality from bacula.dll and put into new
566 separate dlls for each database type. At installation time the
567 correct one is copied to bacula_cats.dll.
568 rbn Eliminate the need to install the mysql.dll on client only builds.
569 rbn Moved dird/sql_cmds.c into the cats directory so all the database
570 specific #ifdefs were in the cats directory.
571 rbn Added a new sql_cmds.h with all the declarations for the variables
572 exported from sql_cmds.c.
573 rbn Moved catalog_db[] from lib/message.c to a new routine db_get_type()
574 which is implemented in bdb.c, mysql.c, postgresql.c and sqlite.c in
576 kes Correct improperly formatted list command output reported by Dan.
578 kes Correct despool time calculation.
580 kes Remove previous changes to compat.cpp as they create problems.
581 kes Use old style MD5 for FileSets to avoid Full saves on every Job.
582 kes Attempt to fix problems with the msg_queue crashing on Solaris
583 when Bacula is terminating, but problems remain.
584 kes Add WIN32_VSS to HAVES in src/Makefile.inc.in to correct VSS
585 name editing problems with too many \\?\es.
586 kes Fix some Bacula source code style problems in compat.cpp.
587 kes Add debug code to compat.cpp and convert non-Bacula debug code
590 kes Change the name of the technical notes file from kes-1.39 to
591 technotes-1.39. Prefix my messages with 'kes '.
592 kes Allow dequeue_messages() to be called twice. Should fix bug
594 kes Add Job type to bscan Job information output.
596 kes Update copyright date in program files, and for the most part
598 kes Implement %q in bsnprintf.c apparently I forgot it.
600 kes Make disk-changer sed command compatible with FreeBSD.
601 kes Make a first cut at a ReleaseNotes and ChangeLog for a
603 kes Make make clean descend into the src/win32 directory.
604 kes Fix some #ifdefing so that Solaris and FreeBSD compile
605 sys/stat.h was turned off.
606 kes Use suffix editing for new transfer rate messages.
607 kes Attempt to come up with a workaround which seems to be an OS
608 bug where write() returns EBUSY. IMO this should not happen.
609 It triggered in truncatebug test. The workaround retries using
611 kes Eliminate a strerror() call in a class method that failed with
613 kes Use rm -rf rather than rmdir to delete the src/win32/release
614 directory during make clean.
616 kes Make bscan ignore ACL streams.
617 kes Update projects files with new Feature Requests.
618 kes Generate current English and French manuals and upload
620 kes Update the home page to include the new British/French flags to
621 switch between translations. Work done by Alexandre Baron.
622 kes Make disk-changer script print an error message if the changer
623 directory is not defined.
624 kes Create a generic DB routine for getting an int (32/64 bit) from
626 kes Add more migration code.
627 kes Add a few more files to .cvsignore here and there.
628 kes Minor fixes for SD write rate and despooling rate.
629 kes Turn off new test code in src/console.c
633 kes Incremented the version number to signify that all of Robert's code
634 for Win32 that was in the branch is now integrated into the HEAD,
635 and that Eric has submitted code that we hope will provide limited
636 backward compatibility with 1.38 file daemons (more testing to be
638 kes I rationalized a few of the names of the variables (mainly jcr names)
639 that are used during migration as keeping three different jcrs at the
640 same time clear in ones head is not easy.
644 eb Tweak new runscript feature to work with 1.38.x FDs.
645 eb Correct crypto.c to fix segfault when restoring an encrypted stream
646 on fd which don't use rsa keys.
647 eb Add yes/no English keywords on localized yes/no questions.
649 kes Several important commits from Robert Nelson for code cleanup and
651 kes Modify console.c so that when conio is enabled, it converts \n to
652 \n\r before outputting to the console. Hopefully this will fix
653 the problems with expect in Perl that Eric saw.
655 kes Change cats/sql.c to eliminate %-*s format, which I think is turned
657 kes Add Comment field to llist of a volume.
658 kes Allow true/false in some yes/no questions.
659 kes Implement update volume enable=(on|off|true|false|archived|0|1|2)
660 kes Remove a few /n's when scanning commands from another daemon. This
661 permits adding additional fields later.
662 kes Modify dbcheck to handle ctl-d and to delete Log table entries.
663 kes Update README.mingw
665 kes Tweak authentication to work with 1.38.x FDs.
666 kes Tweak catalog make scripts.
667 kes Fix catalog upgrade scripts so that they work.
668 kes Correct despooling debug code to eliminate race condition.
670 kes Add additional fields as specified by Arno to LocationLog.
671 kes Add comment field to the Media record.
672 kes Add Time field to the Log record.
673 kes Correct migration SQL (thanks to Bill Moran) so that it
674 runs with PostgreSQL also.
675 kes Add spooling/despooling info in status output of SD.
677 kes Spend a lot of time integrating mkcdrec with the rescue disk.
678 kes Add VOLMGMT message class for volume management messages (none yet).
679 kes Add CATALOG as a destination. It goes into the LOG table.
680 kes Implement the Log table in the DB.
681 kes Implement the Location Log table in the DB (for user use).
682 kes At Eric's request add a run_scripts() just after blast_data in
685 kes Add Enabled column to Location, correct some typos in DB schemas.
686 kes Correct bug I introduced into RunScripts enum.
687 kes Add log table to Catalog
688 kes Purge original job migrated if the migration terminates normally.
689 kes Cleanup purging of files/jobs so that it is done only in a
691 kes Add new VOLMGMT message class.
692 kes Add Catalog message destination (user conf code remains to be written).
694 kes Modify read_record and friends to properly deal with migration
696 kes Update debug code in read_record.
698 ======================= Warning ==========================
699 Separate read and write storage in Jobs in the Director. This
700 is a major rewrite of some of the low level code and hence has
701 a high probability of introducing bugs.
702 ==========================================================
704 kes Move the job init code up to *before* the job is put into
705 the job queue (resource allocation queue). This permits the
706 job to establish whether it will read or write or do both.
707 kes Add name() methods to all the resource classes.
708 kes Implement separate read and write storage resource
709 allocation/deallocation in jobq.c
711 ======================= Warning ==========================
712 Implemented new method of getting the default Storage from the Media
713 record rather than from the MediaType for restore. As a fall
714 back, if no Storage is defined, use the MediaType. This
715 eliminates most all prompts if there are multiple MediaTypes
716 used. This is an important and fundamental change.
717 ==========================================================
719 kes Add more detail (Storage, Device) to list of volumes printed
721 kes More code in migrate. In particular start multiple jobs if
723 kes Probably overkill, but ensure that the bsr is unique even within a
725 kes Rework bsys.c drop() so that it now should work as expected.
726 kes Update a bunch of old copyrights -kes particularly in .h files.
727 kes Remove src/lib/bshm.c/h
731 ======================= Warning ==========================
732 All hash codes in the database are now kept in world
733 compatible base64 format (no = filling). This means that
734 all FileSets will be updated and if you are running
735 verify jobs, you must do an InitCatalog.
736 Authentication uses the new algorithm, but should be
737 backward compatible with 1.38.x
738 ===========================================================
740 kes Modify the authentication routines so that the 1.39.15 Director
741 always runs with the compatible binary to base64 code (same as
742 the rest of the world). It will however detect if an SD or
743 FD is running the old code and if that is the case, will use
744 the old algorithm for authentication. However, all consoles must
745 use the compatible algorithm, and all data entered into the database
746 (all hash signatures, MD5, SHA1, ..., and all FileSet hashes) will
747 use the compatible algorithm.
748 kes Rename the cram_md5 routine names to be slightly more appropriate
749 to what they are doing (challenge and respond).
750 kes Robert committed his #ifdef and header cleanup.
752 kes Fix a compiler warning in files/backup.c
753 kes Cleanup NOT NULL vs DEFAULT 0 in database creation.
755 kes Robert committed his low impact changes.
756 kes I removed a size_t from the jcr.h definition.
757 kes Update the tape regression scripts (still to be tested).
758 kes Add gcc and gcc-c++ requires to srm as suggested by a user.
759 kes Require done or quit to exit from in memory tree restore.
761 kes Write install/uninstall of new manpages. There are now a
762 pile of man pages. Some of which need a lot of work.
764 ======================= Warning ==========================
765 The --mandir ./configure option now points to the top level
766 man directory. The man files will be installed under
767 mandir/man8 and mandir/man1 as appropriate.
768 ==========================================================
770 kes Add complete text of GPL to LICENSE.
771 kes Implement job report that indicates where Storage and Pool
772 came from -kes with overrides and Pool storage and NextPool,
773 it is all very complicated.
774 kes Create a few common subroutines for backup.c and migrate.c
775 kes Eliminate warning messages from tray-monitor.c
777 kes Apply fix for scheduler for missing unlock_jobs().
778 kes Clean out autoconf caches before rebuilding configure
779 kes Fix the FreeBSD pthreads lib define updated by Dan.
780 kes Add missing semicolon in src/console/console.c
781 kes Add Robert's enhanced version of build-win32-cross-tools
782 as well as his patch file.
783 kes Note, the new gcc options are likely to break building of
784 wx-console or the tray-monitor ...
786 kes Implement Robert's suggestion to suppress printing compile lines.
787 kes Detect GCC correctly (I hope)
788 kes If using GCC (actually g++) add the following compiler flags
789 -fno-strict-aliasing -fno-exceptions -fno-rtti
791 ===================== Warning =============================
792 Turn on new bsnprintf() code. This could cause print output
794 ===========================================================
796 kes Fix crypto when not using openssl. I previously overlooked this.
797 kes Eliminate crypto type punning problems by eliminating void * and
798 using uint8_t * instead.
799 kes Harden authentication failure in FD by single threading errors
800 and forcing a 6 second wait.
802 ===================== Warning =============================
803 Removed 'Accept Any Volume' directive.
804 ===========================================================
806 kes Major cleanup and simplification of regress using shell functions
807 (more tests to be converted to new format)
808 kes Add detection of 64 bit Irix as indicated by user.
809 kes Increment catalog database id from 9 to 10.
810 kes Add a few of the new database fields to the various C++
812 kes Implement code to fill in the most important new fields (e.g.
814 kes Ensure that most of the new fields are in create/get/insert/update.
815 More work to be done.
817 kes Update some very old licenses in src/cats.
818 kes Modify the database format for handling Migration jobs:
819 Add PriorJobId, RealEndTime to Job table
821 Remove Stripe from JobMedia record (not used, wasting space)
822 Add ScratchPoolId, RecyclePoolId, Enabled to Media record
823 Add Cost to Location table.
824 kes Delete mac_record subroutines.
825 kes Add new table values to create/update/get routines as appropriate.
826 kes Update the update_tables and make_tables scripts.
827 kes Make a first cut in using a union where multiple pointers (actually
828 pointers to pointers) are stored.
829 kes Make some changes to base64.c suggested by Robert and others and add
830 a small amount of documentation.
831 kes Add some changes suggested by Peter for Solaris (bregex...)
832 kes Make runscript.h always built because it needs to be pulled into
833 more places. In particular its RES was left out of a union.
834 kes Renumber the enum{} list in runscript.h to avoid starting from zero.
835 This makes it slightly easier to detect uninitialized variables.
837 kes Remove xpg4 lib from FreeBSD build as it is no longer needed and
838 sometimes creates install problems.
839 kes Change a couple of %T in strftime to %H:%M:%S as seen in Robert
840 Nelson's code. More to do.
841 kes Convert a few store_bit to store_bool in filed_conf.c.
842 kes DVD tweak to block.c as supplied by Uwe Muessel.
844 kes Modify configure.in to check for typeof().
845 kes In findlib/attribs.c use typeof instead of templates if possible.
847 kes Implement partial error messages for src/filed/acl.c
848 kes Fix return code to fail when doing update barcodes and
849 Pool resource is not found. This previously caused Volumes
850 to be labeled as cleaning tapes.
851 kes Small updates to projects.
853 kes Add Eric Bollengier patch for new RunScript directive. It breaks
854 compatibility between dird and fd.
856 kes Prevent DVD code from rewriting label if the device cannot be
858 kes Used __GNUC__ to detect GNU g++ as suggested by John Goerzen to
859 fix Debian build bug.
860 kes Fix Dir/SD run race in migrate.c, verify.c, and restore.c
861 kes Integrate manpages contributed by Jose Luis.
862 kes Update projects file.
863 kes Add manpages Makefile.in to configure.in
864 kes Remove installation of bacula.8 in scripts directory.
866 kes Implement patch submitted by cesarb in bug #606 to implement O_NOATIME
868 O_NOATIME is a open() flag which makes it possible to read a file without
869 updating the inode atime (and also without the inode ctime update which
870 happens if you try to set the atime back to its previous value). It also
871 prevents a race condition when two programs are reading the same file, but
872 only one does not want to change the atime. It's most useful for backup
873 programs and file integrity checkers (and bacula can fit on both
876 Recent versions of the Linux kernel and glibc have support for it (the
877 glibc support being mostly copying the O_NOATIME definition to
878 bits/fcntl.h). If there's no support for it on the kernel, trying to use
879 it does nothing (since the kernel ignores unknown flags).
881 If the kernel has support for it, trying to use it either works, fails
882 silently (mostly in remote filesystems), or returns errno=EPERM (if you
883 are not either the owner of the file or root). A simple way to prevent the
884 failure is to open the file without the flag and set it later with
885 fcntl(F_SETFL), ignoring any EPERM errors.
886 kes Applied patch posted by Jaime Ventura to bug #570 to correct failure
887 of restarted jobs to complete (due to a destroyed pthreads conditional
888 variable used by the message thread).
889 kes Fixed bug #619 where Bacula would not restart jobs with MaxRestartTimes
891 kes Apply patch from John Goerzen bug #611 to fix bad manual links in the code.
892 kes Apply patch from Rudolf Cejka bug #614 to removed trailing
893 colons in query.sql file.
894 kes Apply patch from Rudolf Cejka bug #613 to correct prunning of files
895 not to create orphans.
896 kes Apply patch from Rudolf Cejka bug #617 to use mtime instead of ctime
897 in restore long listing.
898 kes Apply patch from Rudolf Cejka bug #609 to use MarkId in verify.c instead
899 of incorrect MarkedId.
900 kes Apply patch from adioso bug #616 to correct text in manual (replace
901 Director with File daemon).
902 kes Rework a few of the zlib changes so that they build properly.
905 kes Move DIR 'run' command to SD before starting the message thread
906 as suggested by Cristopher Hull to avoid a race deadlock from
907 two threads using the bsock structure.
908 kes Modify LICENSE to correct some problems pointed out by Debian.
910 kes Correct EOF with no \n lex.c problem.
911 kes Tweak compat.h compat.cpp and merge with apcupsd
912 kes Add additional INFO messages if autochanger cannot be used.
915 kes Simplify Win32 Makefile
916 kes Correct count of buffers/bytes used by smartall.c
917 kes Updated compat.h after porting apcupsd to MinGW.
919 kes Work on getting wx-console building on MinGW. wxWidgets now builds
920 started adding Makefile ...
921 kes Moved MinGW library objects to src/win32/lib to reduce clutter.
923 kes Reloading a bad configuration file doesn't kill director any more.
924 Thanks to fix from Eric Bollengier.
926 kes Fix problem of accents with new Win32 code.
927 kes Integrate Howard's VSS patch. Tweak it a bit. VSS now
928 works in the MinGW build with the exception that there
929 is a problem with accented characters -kes i.e. there is
930 some mapping problem with wide characters.
931 kes The code no longer compiles with Microsoft VC++.
933 kes Start implementing Christopher's St.Bernard code.
934 kes Add Christopher's mods for opening files.
935 kes Strip \r \n from Win32 error messages (Christopher)
936 kes Add more info about Win32 system if unknown (Christopher)
937 kes Use bstrn(cpy, cat) routines to avoid overrun in compat.cpp
938 kes Fix a number of incorrect strings marked for translation, when
939 they should not be (e.g. commands).
940 kes Fix StartTime bug reported for ClientRunBeforeJob and RunBeforeJob
941 Patches supplied by user in bugs #608 and #599.
942 kes Use most recent of st_ctime and st_mtime in restore tree DIR
943 listing. This fixes some problems with Win32 printing incorrect
945 kes Correct the clock shift comm time calculation between the DIR
946 and the FD. It was added rather than subtracted.
947 kes Strip all backslashes in filenames to be restored on Win32
948 machines -kes the names should all be in Unix format, and if
949 there are any backslashes it is most likely due to an improper
950 FileSet definition, and the files will not otherwise be
952 kes Remove lib/regex.c (replaced by bregex.c).
953 kes Delete src/win32/License.txt
954 kes Modify installer to install LICENSE
956 kes Fix bug in build-win32-cross-tools script reported by Howard
957 kes Implement cross compiled bconsole
959 kes Fix barcode test, eliminate BOOL (doesn't exist on Linux).
960 kes Write first cut of README.mingw32
961 kes Add back ua_label barcode fix from Rufolf Cejka.
962 kes Integrate the majority of the Mingw cross-tools submission
963 made by Howard Thomson. Everything compiles, with zlib, openssl,
964 and VSS turned off. Linking needs a pthreads library ...
966 kes Add 'Dir Status' button to the gnome console.
967 kes More work on migration.
968 kes Restore non-compatible base64 coding to permit compatibility.
969 kes Display heap stats in Storage daemon without debug level.
971 kes Integrate most of the MinGW changes -kes more to do.
973 kes Implement using pg_config for finding PostgreSQL files.
974 Fixes bug #600. Patch supplied by user.
975 kes Remove -t option from mktemp in mtx_changer.in and use
976 working directory. Fixes bug #578.
977 kes Update job start time after the any run before job so that
978 files created by the script are only backed up once. Fixes
980 kes Strip trailing newline only from filenames entered in
981 the restore command when reading a file. This permits
982 the user to enter filenames with trailing spaces. Fixes
983 bug #549. The user supplied a patch that I modified slightly.
984 kes Use the most recent time (st_mtime, st_ctime) in the dir
985 command in restore. This gives the user a better idea of what
986 the newest file really is. This fixes bug #574. The fix
987 was suggested by the user.
988 kes Implement a compatible version of base64. This permits external
989 programs to duplicate Bacula's base64 algorithm using standard
990 routines. This fixes bugs #296, and 565. Patch submitted by
992 ================= Note ========================
993 Previous Signatures stored in the database are no longer
994 compatible with this. The main downside is for Verify jobs,
995 and doing an InitCatalog run will fix the problem. Also, the
996 authentication between the deamons is changed, so all daemons
997 must be simultaneously upgraded.
998 ==============================================
999 If you don't like this fix, set:
1000 const bool compatible = true;
1002 const bool compatible = false;
1005 kes Ensure that DB signature is never NULL.
1006 kes Ensure that DB table names are not translated.
1007 kes Fix scheduler to handle time skew (eg daylight savings).
1008 kes Fix scheduler to use lock_jobs() to avoid most problems
1009 with reload. Window is now milliseconds.
1011 kes Apply patch from Christopher Hull
1012 kes Allow multiple connections to database with different
1014 kes Invalidate the scheduler when doing a reload. Fixes seg
1015 fault, but still 60 second window.
1016 kes Additional info in Reschedule message.
1017 kes Use set_jcr_job_status() everywhere to prevent loss of
1019 kes Display peer IP in FD if error from connecting DIR.
1020 kes Don't increment file count for DIRBEGIN.
1021 kes Replace illegal characters in Win32 filename by _.
1022 kes Add SE_CREATE_PERMANENT_NAME privilege in Win32.
1023 kes Hash hard link filenames rather than linked list.
1024 kes Fix for security failure in chdir on Win32.
1025 kes Add CreateDirectoryA/W win32 API entry points.
1026 kes Add /silent option to Win32 FD for Install/Remove service.
1027 kes Always print Heap statistics in FD.
1029 kes Remove the -f option from the chown in Makefile.in for more
1031 kes Change setting the group in Makefile.in to use chgrp for
1033 kes Implement a write_store and read_store to replace
1034 dirstore in reserve.c
1035 kes Implement a Bacula read/write lock for Python rather
1036 than using the Python lock to avoid recursive problems.
1037 kes Correct the uninstall directory names in filed/Makefile.in
1038 as reported by a user.
1040 kes Correct some problems with database creation (new tables).
1041 kes Replace a bunch of old 0x%x by %p.
1042 kes Get first cut of Migration with Job selection working.
1044 kes Change store_bit() to store_bool() for the Spooling in
1045 dird_conf.c -kes bug reported by Robert Nelson.
1047 kes Correct Makefile bug found by Dan Langille.
1049 kes Correct Makefile for Solaris /bin/sh
1050 kes Correct mtx-changer.in for Solaris /bin/sh
1051 kes Abort if a conf resource does not have a Name =
1053 kes Change the name of the regex program to bregex.
1054 kes Add the bwild program to the tools directory. It is similar
1055 to the bregex program.
1056 kes Implement create bregex.h and bregex.c in src/lib from the
1057 Python regexp program.
1058 kes Use the new bregex.c to implement Regex expressions on Win32.
1060 kes More work on migration.
1061 kes Implement wild program in tools directory for testing
1062 wild-cards. Almost identical to the regex program.
1063 kes Up port VSS single thread locking code.
1064 kes Replace N_(..) by NT_(...) to inhibit translation of
1066 kes Modify Makefile to change the permissions on Working Directory
1067 to 770 if the directory is created.
1068 kes Do not fail the Makefile if changing the permissions or
1069 owner/group on WorkingDir fails.
1070 kes Remove early selection of Scratch Volumes in the recycling
1072 kes Correct the old recycling algorithm so that Scratch Volumes
1073 are selected when looking for a Volume in the changer.
1074 kes Correct a typo in the Verify SQL reported by Joe Park.
1076 kes Remove automatic case folding on Windows FDs. You must
1077 explictly use the 'Ignore Case = yes' option.
1078 kes Remove the code added to 1.38.6 and 1.38.7 that pulls a
1079 scratch volume in an Autochanger early in the 'recycling'
1082 kes Make weof() and clrerror() methods of class DEVICE.
1084 kes Tweak license to include Microsoft restrictions.
1085 kes Move mysql.reconnect to after real_connect(). Thanks to
1086 Frank Sweetser for the patch.
1087 kes Disallow a backslash in a File = directive (Windows junk)
1088 unless the string is quoted.
1089 kes Apply Eric's patch to ua_label.c so that daemon protocol
1091 kes Add NT_ definition for strings that should not be translated.
1092 kes Apply NT_() to ua_label.c
1093 kes Remove timed wait for VSS on Win2K3 as it is not yet
1095 kes Correct bacula.in script to reference bacula-ctl-xx in the
1096 sysconfig directory rather than the bin directory.
1098 kes Fix a long standing bug in the bacula start/stop scripts.
1099 kes Attempt to add the new bacula-ctl-* files to the rpm.
1100 kes Switch to using typeof() for list traversing to avoid
1101 as many FC5 g++ compiler warnings as possible.
1103 kes Split the bacula start/start script into four files:
1104 bacula -kes starts and stops calling other scripts
1105 bacula-ctl-dir -kes starts/stops the director
1106 bacula-ctl-fd -kes starts/stops the File daemon
1107 bacula-ctl-sd -kes starts/stops the Storage daemon
1109 kes Create datestyle fix for PostgreSQL. Fixes bug #574.
1110 kes Correct editing of JobId from int to int64 in fd_cmds.c
1111 kes Eliminate FileSet name race with bash_spaces() and multiple
1112 threads by bashing in a local.
1113 kes Fix error return from 'use storage' to print a correct error
1114 message rather than nothing.
1115 kes Correct false re-read last block error message when two jobs
1116 are simultaneously writing at the end of a tape.
1117 kes Simplify exit conditions in the reserve.c code to avoid
1118 possible non-release of reservation_lock().
1119 kes Suffle lock order in reserve to avoid deadlock between
1120 reservation lock and device mutex.
1122 kes Initialize jcr mutex before first use. Thanks to Thorsten for
1123 tracking this down for me !!!! as it broke the Win32 build.
1125 kes Integrate addition of line count limitation to bsmtp -l from
1126 Sebastian Stark <stark at tuebingen.mpg.de>
1128 kes Implement regex test program in tools directory.
1129 kes Attempt to fix time problem with bsmtp with foreign langs.
1130 kes Add strip_trailing_newline() submitted by user.
1131 kes Implement regex matching in migrate.c
1133 kes Fix bug #537 to allow arbitrary time to mount a volume for
1134 restore, if polling is turned on.
1135 kes If dir_user or dir-group is specified in ./configure apply it to
1136 the working-dir. Fixes bug #533.
1137 kes If rescheduling a job cancel the previous incarnation with the SD.
1138 Fixes bugs #566 and 557.
1139 kes Fix bug #567 do_message() definition type conflict.
1142 kes Add more jcr methods and make mutex and use_count private.
1143 kes Create lock/unlock methods for jcr.
1144 kes Fix PostgreSQL bug doing sql_data_seeek() by explicitly reading
1145 records to get to seek position.
1146 kes Integrate patch from bug #561 to correct conio.c signal definitions.
1147 kes Fix Rescheduling failed Jobs. Ensure that SD message thread
1148 terminates correctly by doing pthread_kill(). Do not destroy
1149 SD cond wait variable between executions of the job. Use local
1150 mutex for cond variable to avoid blocking jcr chain. Fix poor
1151 use of jcr use count in jobq.c for restarted jobs.
1152 kes Fix obsolete usage of foreach_dlist() to use foreach_jcr() in
1153 lib/jcr.c -kes prevents locking the jcr chaing.
1154 kes Apply patch from bug #564, which corrects listing volumes with
1155 multiple autochangers. Apply same fix to next volume list.
1156 kes Fix bug #562 where restore bootstrap file is not unique.
1157 kes More details in implementing David's migration syntax proposal.
1158 kes Save and restore dcr when swapping drives so that if we have
1159 a write dcr it is not lost.
1160 kes Use new routine lock_reservations() to lock the reservations
1161 system, and call it while looking for a volume in askdir.c.
1162 This could possibly fix bug #543.
1163 kes Stop SD command loop if job is canceled.
1166 kes Remove old code from findlib/create_file.c
1167 kes Rename mac.c migrate.c
1168 kes Add user friendly display of VolBytes in job report.
1169 kes Rename target... to previous... to make it a bit easier to
1171 kes Add selection type and selection pattern to Migration (idea
1172 given by David Boyes).
1175 kes The po files should now be current.
1176 kes Fix new sql_use_result() code to properly release the
1177 buffers in all cases.
1178 kes Use the keyword ujobid to mean the unique job id; job or jobname
1179 to mean the Job name given on the Name directive, and jobid to
1180 be the numeric (non-unique) job id.
1181 kes Allow listing by any of the above.
1182 kes Add the user friendly job report code for reporting job elapsed time
1183 and rates with suffexes from John Kodis <kodis at comcast.net>.
1184 kes Add Priority and JobLevel as Python settable items.
1185 kes Use TEMPORARY table creation where the table is created by
1187 kes Add new code submitted by Eric for waiting on specific jobid.
1188 kes Add ACL checking for the dot commands.
1189 kes Fix restore of writable FIFOs.
1190 kes Fix a bug in bpipe where the string was freed too early.
1192 kes Modify the Python class examples to inherit object -kes new way
1193 of defining classes. Patch from Felix Schwarz.
1194 kes Implement jobuid to replace old usage of job in keywords as
1195 suggested by Eric Bollengier.
1196 kes Apply patch for enhancing wait from Eric Bollengier. On can now:
1197 wait (wait for all jobs to stop)
1199 wait jobuid=unique id
1201 kes Implement write variables for Python to set Priority (anytime), and
1202 Job Level, only during JobInit event.
1204 kes Fix the block listing bug pointed out by Arno.
1205 kes Update the po files at Eric's request.
1207 kes Fix Maximum Changer Wait, Maximum Open Wait, Maximum Rewind Wait to
1208 accept time qualifiers.
1209 kes Make catalog respect ACL.
1210 kes Add recycle count to Media record.
1212 Changes to 1.39.6-beta1 24Feb04
1214 kes Add Rudolf Cejka's new rc-chio-changer.
1215 kes Implement pulling Volume from Scratch Pool if the
1216 Volume is in the autochanger.
1217 kes Implement additional command arguments for update Volume.
1221 kes Back port changes to 1.38.5
1222 kes Fix recycle SQL for StorageId.
1223 kes Fix misplaced quote in mtx-changer script.
1225 kes Note. Your database must be updated, or you must create
1226 a new database. I have not yet incremented the database level.
1227 kes Add Location table.
1228 kes Add LocationId, DeviceId, and MediaTypeId to Media record.
1230 kes Implement create/get mac record in database for adding extended
1231 Migration data to the job record.
1232 kes Add new MAC table to update/make database scripts.
1233 kes Return Storage name used when getting VolumeNames for a job.
1234 kes Change bsr file keyword Storage to Device, which is more accurate.
1235 kes Ensure that Mac records are pruned/purged.
1236 kes Tweak SD tools to deal with changing media type.
1237 kes Integrate more dev.c subroutines as methods (e.g. strerror, bsr, ...)
1238 kes Pass pointer to dcr pointer to acquire_device_for_read() so
1239 that the subroutine can switch devices, and hence dcrs.
1240 kes Modify the multiple MediaType read code to re-use the same
1241 dcr when switching devices. This makes the code much more
1243 kes Integrate patch from Karl Hakimian that reads JobIds, FileIndexes
1244 from a table for restore.
1245 kes Add Storage name to VolParams, but it really should be Device.
1247 kes Add disk-changer to scripts directory + configure/Makefile
1248 kes Eliminate PoolId from jcr -kes it is in jcr->jr.PoolId
1249 kes Implement store_bit scanner to replace store_yesno. Mostly done.
1250 kes Implement new store_bool that stores in a bool.
1251 kes Add true/false to yes/no conf directives.
1252 kes Make first cut at changing appropriate store_yesno to store_bool.
1253 kes Complete implementation of Pool storage devices.
1254 kes Move starting clones to job.c
1255 kes Move create_restore_bootstrap_file() to job.c
1256 kes Make copy_storage() more general to be able to handle
1258 kes Cleanup a lot of migration code for manual running, including
1260 kes Move getting a scratch Volume into a subroutine.
1261 kes Make all places a Volume that is added to a pool to
1263 kes Fix bug in autochanger recycle code (improper edit 64 bit).
1264 kes Fix segfault in restore command when no value specified.
1265 kes Start adding code to handle multiple MediaTypes in restore.
1266 kes Eliminate race condition in getting Volume name for
1267 two drive autochanger.
1268 kes More debug code in autochanger.
1269 kes Add storage keyword to bootstrap file, add parsing.
1270 kes Move slot in bsr file into Volume record as there will be
1271 a different slot for each Volume.
1272 kes Create reserve.h
1274 kes Implement Pool storage overrides.
1276 kes Implement first cut of Migration.
1277 kes Implement mysql_use_result() from patch by Karl Hakimian.
1278 This reduces significantly the memory consumption during
1279 the restore tree building, and hence runs faster too.
1280 kes Implement StorageId patch supplied by user (reggie) in bug
1281 #536. This should permit Bacula to work correctly with two
1283 kes Implement Job listing variations suggested by a user.
1284 kes Move updating bootstrap code in backup.c to subroutine
1285 update_bootstrap_file().
1286 kes Add new job status elapsed time and bytes written user
1287 friendly job report output patch sent by John Kodis
1288 <kodis at comcast.ne>.
1289 kes Implement a storage list in Pools.
1290 kes Separate out setup_job() code from run_job().
1291 kes Get migration working -kes lots of changes in mac.c in both
1293 kes Apply patch from user (Eric Bollengier I think) that fixes a
1294 DIR crash when no arguments are supplied to a dot command.
1295 kes Fix typo (strcpy->strcmp) in ua_prune.c as reported by Martin.
1296 kes Fix command arg name->volume in label command of gnome-console.
1297 kes Fix SD acquire.c to release correct DCR by explicitly testing
1298 on the dcr address rather than trying to devine if it is a read
1299 or write dcr. This failed in error conditions when the device was
1303 kes Apply user supplied patch for more readable rate output
1305 kes Continue implementing migration.
1306 kes Implement support for removable filesystems in SD.
1307 kes Ensure that btraceback scripts can be read by anyone.
1308 kes Replace dvd-freespace and dvd-writepart by dvd-handler.
1309 kes Correct bug where canceling restore before the FD contacts
1310 the SD causes the drive to be left in read mode.
1311 kes Move ofline_or_rewind into DEVICE::close().
1312 kes Eliminate close_device.
1313 kes Convert several dev subroutines to methods (e.g. bsf,
1315 kes Eliminate force_close_device().
1316 kes Implement Device Type directive in Device resource that
1317 can have values File, Tape, Fifo, DVD, or Prog.
1318 kes Add has_cap() method to Device.
1321 kes Add patch from bug #527 to allow RedHat user to specify
1322 options/user/group for starting each daemon in
1323 /etc/sysconf/bacula.
1325 kes Add two new queries to query.sql provided by Arno. One
1326 list volumes known to the Storage device, and the other
1327 lists volumes possibly needing replacement (error, ...).
1329 kes Add periodic (every 24 hours) garbage collection of memory
1330 pool by releasing free buffers.
1332 kes Correct bug counting sized (for display only) in smartall.c
1333 kes Print FD mempool stats if debug > 0 rather than 5.
1335 kes Make db_lock() mutex error fail the job rather than abort
1336 Bacula. Canceling the job caused the mutex to fail.
1337 kes Correct bug in alist.c that re-allocated the list if the
1338 number of items goes to zero.
1339 kes Move the reservation system thread locking to the top level
1340 so that one job at a time tries all possible drives before
1342 kes Implement a reservation 'fail' message queue that is built
1343 and destroyed on each pass through the reservation system.
1344 These messages are displayed in a 'Jobs waiting to reserve
1345 a drive' list during a 'status storage='. Note, multiple
1346 messages will generally print for each JobId because they
1347 represent the different problems with either the same drive
1348 or different drives. If this output proves too confusing
1349 of voluminous, I will display it only when debug level 1
1350 or greater is enabled in the SD.
1352 kes Add enable/disable job=<job-name>. This command prevents
1353 the specified job from being scheduled. Even when disabled,
1354 the job can be manually started from the console.
1355 kes During 'update slots' clear all InChanger flags where the
1356 StorageId is zero (old Media records).
1358 Beta release 1.38.4:
1360 kes Fix autochanger code to strip leading spaces from returned
1361 slots number. Remove bc from chio-changer.
1362 kes Back port a bit of 1.39 crypto code to reduce diffs.
1363 kes Fix first call to autochanger that missed close()ing the
1364 drive. Put close() just before each run_program(). Fixes
1367 kes Add PoolId to Job record when updating it at job start time.
1369 kes Pull in more code from 1.39 so that there are fewer file
1370 differences (the new ua_dotcmds.c, base64.h, crypto.h
1371 hmac.c jcr.c (dird and lib) lib.h md5.h parse_conf.c
1372 util.c. Aside from ua_dotcmds.c these are mostly crypto
1374 kes Implement new method of walking the jcr chain. The
1375 incr/dec of the use_count is done within the walking
1376 routines. This should prevent a jcr from being freed
1377 from under the walk routines.
1382 kes Start implementing Verify list output.
1383 kes Move the suitable_drive flag to a better place to prevent
1384 premature termination of the reservation if all drives
1385 are busy -kes should fix Arno's diff/inc pool failures.
1387 kes Add mutex to single thread VSS code in Win32.
1389 kes Simplify code in askdir.c that waits for creating an appendable
1390 volume so that it can handle multiple returns from the wait
1392 kes Modify the wait code to permit multiple returns.
1393 kes Return a zero when 'autochanger drives' is called and
1394 it is not an autochanger.
1395 kes Make rewind_dev() a method taking a DCR as an argument.
1396 This permits closing and reopening the drive if the
1397 rewind fails as happens if the drive was loaded while the
1398 file descriptor was open. This refreshes the file descriptor.
1399 kes Remove the ST_OPENED flag and always rely on fd < 0 for knowing
1400 if the device is open or not. This should eliminate
1402 kes Return error if reserve cannot find at least one suitable device.
1403 kes Make wait_for_sysop() return correct state information.
1404 kes Fix Win32 state file problem. write was not using compat
1405 code. This should fix bug #500.
1407 kes Modify gui on command to set only GUI mode and not batch.
1408 kes Modify .messages command to always print messages regardless
1410 kes If GUI mode is on, suppress automatic printing of
1412 kes Delete old bnet packet code.
1413 kes Ignore new BNET_START_SELECT and BNET_END_SELECT signals in
1414 wx-console. -kes not implemented because bconsole must be updated.
1415 kes Modify restore command in wx-console to set gui on and to use
1416 only .messages instead of messages. Hopefully this fixes bug
1418 kes Fix seg fault in exit of acquire when canceling a job --
1419 reported by Wolfgang Denk
1420 kes Pull in latest reservation system changes from 1.38
1421 kes Make .messages command always print messages regardless
1422 of the automessages flag.
1424 kes Fix seg fault if user labels a drive directory bug #513
1425 kes Remove quotes around Version as it breaks things.
1427 kes Merge in Aleksandar Milivojevic's mods to the spec file.
1428 kes Apply sparse code fix for raw drives and fifos. Bug 506
1429 kes Thorsten fixed Unicode cd problem with wx-console bug 505.
1431 kes Correct reservation system to do a last ditch try
1432 for any mounted volume, then anyone anywhere.
1433 kes Add quotes around table Version because of
1434 error in MySQL 4.1.15 -kes bug report submitted.
1435 kes Correct some minor problems with btape in the fill
1437 kes Updates to ssh-tunnel from Joshua Kugler.
1438 kes Added a report.pl program from Jonas Bjorklund.
1439 kes Simplify the O_NONBLOCK open() code for tape drives,
1440 and always open nonblocking.
1441 kes Do not wait for open() if EIO returned (shouldn't happen).
1442 kes Eliminate 3 argument to tape open().
1443 kes Correct the slot # edited in the 3995 Bad autochanger unload
1445 kes With -S on bscan (show progress) do not divide by zero.
1447 kes Make cancel pthread_cond_signal() pthread_cond_broadcast().
1448 kes When dcr is freed, also broadcast dev->wait_next_vol signal.
1449 kes Remove unused code in wait_for_device.
1450 kes Make wait_for_device() always return after 60 seconds of wait.
1454 kes Add stubs for non-crypto build.
1456 kes Use localhost if no network configured
1458 kes Eliminated duplicate MaxVolBytes in cat update -kes bug 509.
1459 kes Remove debug print.
1460 kes Add bail_out in error during state file reading.
1462 kes Merge changes made to 1.38.3 into HEAD
1463 kes Add stubs for pygtk-console code
1464 kes Create Makefile.in for pygtk-console code
1466 kes Merge updates into 1.38 branch
1467 kes Update specs to include mysql4 define.
1468 kes Fix when attributes are sent, must be after binit().
1469 kes Stop read_record() if status not ok in second loop.
1470 kes Return rec->FileIndex in dcr->VolLastIndex for normal
1471 and partial records in read_record(). This allows bscan
1472 to get FileIndex at EOT correct.
1473 kes Fix butil.c to correctly set dcr -kes fixes seg fault in bls.
1475 kes Fix Win32 built to work with new crypto code.
1476 kes Apply patch supplied by user (slightly modified) to fix
1477 correct detection of holes in block devices and FIFOs.
1479 kes Apply patch supplied by user (slightly modified)
1480 to fix SD hang with multiple pools and bad client
1481 IP. Fixes bug # 508.
1483 kes Add nagios plugin to the examples directory. Submitted by
1485 kes Remove warning message about multiple saves of hardlinked files
1486 from find_one.c as it can generate too many warning messages.
1487 kes Modify most restore error messages to be queued so that they
1488 appear at the end of the job rather than mixted with the restore
1489 listing where they could be 'lost'.
1491 kes Reset timeout values before select() per patch from
1492 Frank Sweetser for problems with non-blocking sockets.
1493 kes Unlink the state file if either reading or writing it gets
1494 errors. Hopefully this will fix Win32 exit problems.
1495 kes Add sanity check in append.c to ensure that dcr is not NULL.
1496 This can happen if multiple drive autochanger SCSI control
1497 channel and drive indicies do not correspond.
1499 kes Get next volume from Scratch pool before creating a volume.
1500 kes Set new Pool defaults in Vol when moved from Scratch Pool.
1501 kes Remove argument from create_bacula_database for SQLite as it
1503 kes Add back index code so that two drive autochangers can get
1505 kes Change a bunch of debug levels to aid debugging autochangers.
1506 kes Fix reservation so that mutexes are properly applied.
1507 kes Rework reservation algorithm so that two drives can be used
1510 kes Landon merged his data encription changes into the HEAD
1511 kes Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
1512 If this patch is applied, the number of days can be specified with
1513 'list nextvol days=xx'
1515 'status dir days=xx'
1516 My use case is to be able to preview the next scheduled job (and the
1517 next tape to be used) on fridays if there are no scheduled jobs during
1521 kes Fix font code in gnome2 console user patch. Fixes bug #501.
1522 kes Fix malformatted bnet error message that caused seg fault
1524 kes Applied user patch to improve README.vc8 in src/win32.
1526 kes Add Migrate, Copy, Archive Job types (some where there)
1527 kes Correct some more editing of JobId's (for 64 bit compatibility).
1528 kes Ensure that StorageId is stored in Media record when ever possible.
1529 kes Add Migration Job to Job.
1530 kes Add Migration Time, Migration High Bytes, Migration Low Bytes
1531 Next Pool to Pool resource.
1532 kes Add more code to mac.c (migration archive copy).
1533 kes Change Start Storage daemon job to require read and write storage
1535 kes Pass read storage data to SD as well as write storage data.
1536 kes Remove old code from winservice.cpp
1537 kes Break on error in scan.
1538 kes Fix typo in signal.c
1539 kes Separate read/write DCR in SD. Add jcr->read_dcr.
1540 kes Cleanup how find_device() works.
1541 kes Add read output to Status in SD.
1544 kes Add red-black btree routines
1546 kes Remove abs() in bfile.c so that it compiles on Solaris.
1549 kes Fix crash in tray-monitor when daemon disconnects. Bug #479.
1550 kes Fix bnet-server bug found on OpenBSD. Bug #486
1551 kes Fix cancel failure bug. Bug #481
1552 kes Fix failure when Pool name has spaces. Bug #487
1553 kes Fix SD crash in autochanger code. Mutex failure. Bug #488
1554 kes Fix a couple of free()s in src/filed/acl.c
1555 kes Fix memory overrun in bfile.c in building OS X resource
1556 fork filename. Bug #489
1557 kes Add Pool name to SD status output.
1559 kes Apply SunOS patch for ACLs submitted by David Duchscher.
1560 kes Make sure to set storage before trying to set drive.
1561 kes Add bacula_mail_summary.sh to examples directory. It makes
1562 a single email summary of any number of jobs. Submitted
1564 kes Make sure when we do a mount to unblock the device even
1565 if the drive could not be opened.
1567 kes Remove the USE_WIN32STREAMEXTRACTION #defines (always on)
1568 and correct a few minor problems to make it build on Linux.
1570 kes Remove delete of CVS from all Makefiles
1571 kes Fix seg fault when clicking on Add button in wx-console
1572 restore panel. Bug #470.
1573 kes Fix copyright date and URL typo -kes bug #468.
1574 kes Change autostart install for FreeBSD to look for rc.conf
1575 rather than rc.local as suggested fix for bug #466.
1576 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1577 grant on status. Bug #465
1578 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1579 update script. Bug #464
1580 kes Tweak #ifdefing a bit in new Win32 stream code.
1581 kes Fix #ifdeffing for FD_NO_SEND_TEST.
1582 kes Add documentation of performance #defines
projects / bacula / bacula / blob