1 Technical notes on version 1.39
6 ebl Small fix src/dird/job.c to add JobErrors count to catalog.
8 kes Fix optional files in Makefile.in of src/filed that caused
9 a syntax error when using no optional files.
11 lf Fix a cosmetic bug in filed.c that caused spurious OpenSSL error
12 messages; there is no reason to attempt to load a private key.
13 from master key files.
15 Version 1.39.24 released:
17 kes Apply the three patches from Richard Mortimer.
18 bacula-reposition.patch, bacula-tape-reopen.patch, and
19 bacula-eod.patch. This corrects tape positioning on older devices,
20 and also a problem with btape.
21 kes Apply fix from bug report #696 where writing to a FIFO does not
22 work due to a dumb typo.
23 kes Unlock the tape door before the file descriptor is released. This
24 should fix lots of somewhat subtle failures when using an autochanger.
26 kes Correct mtx-changer bug that I introduced in a recent commit, and
27 pointed out by Robert Nelson -- thanks.
28 rbn Fix Windows' daemons so that messages print to stdout if not
30 rbn Add daemon name to trace file name (eg bacula-dir.trace).
31 rbn Fix environment variable expansion in directory names on Windows.
32 rbn Fix autochanger support in fill command.
33 rbn Update SQL scripts to match Unix versions.
34 rbn Fix daemon usage displays.
35 rbn Cleanup bacula-dir.conf template.
36 rbn Install openssl.cnf so that the openssl.exe installed in the
37 Bacula\bin directory can be used to generate keys and
38 certificates for TLS and encryption.
39 rbn Fix cleanup of spool files on Windows.
40 rbn Remove /silent option from daemons on Windows. The new default
41 is the same as the old /silent. To enable the message boxes that
42 previously were suppressed by /silent you must add /debug instead.
43 NOTE: As a result of this change, the first time you upgrade from
44 a previous version of 1.39.x you will receive the message
45 boxes when the remove of the old services succeeds. This
46 is the same behaviour as when migrating from a version prior
48 However, going forward, these message boxes will not appear on
49 upgrades or new installs.
50 rbn Add new /debug option. This option enables the message boxes that
51 previously were suppressed by the /silent option. In addition the
52 daemons running as services will open a console window if this
54 rbn Fix bug with service not being removed on migrated installs. This
55 should correct those cases where the file daemon install was failing
56 when upgrading from versions prior to 1.39.x.
59 kes Turn on heap reporting in Dir with zero debug level.
60 kes Send a message to the sys log when Bacula forces a SEG FAULT, and
61 send the same message to stdout.
63 kes Begin work on new GUI "console".
64 kes Make configure look in non-standard MySQL library directory
66 kes Make mtx-changer automatically configure the autochanger wait
67 procedure for Solaris, FreeBSD, and Linux. Previously, only Linux
69 kes Correct drop_sqlite_tables.in script to not delete the database.
70 kes When writing to a log file, close and reopen the file descriptor
71 if there is an error writing the file.
72 kes Modify the autochanger loaded?, load, and unload commands to print
73 the full text of any mtx output if there is an error. Helps to
74 ease diagnosis of autochanger problems.
75 kes Correct a few Win32 errno returns in the VSS code so that hopefully
76 a resonable Win32 error message will be printed.
77 kes Convert a few strcat()... to bstrncat() in the Win32 code.
79 rbn Added Windows version of bsmtp.
80 rbn Fixed path search for Windows so that Bacula\bin is automatically
81 searched for programs and scripts.
82 rbn Fixed bugs in mtx-changer.cmd and made template bacula-sd.conf
85 Version 1.39.24 released:
87 kes Apply dvd find volume patch from Richard Mortimer.
88 kes Eliminate the dvd specific mount routines using only the
90 kes Make update_free_space a method of DEVICE and rename
93 kes Require a messages command acl to be able to receive messages
95 kes Add console, system, and scan job types in util.c.
97 kes Print the Volume purged message only for real jobs to keep
98 from cluttering up the daemon messages.
99 kes Lock the tape drive door while Bacula is using the device.
100 kes Add back the 'No Jobs running' message to FD and SD status because
101 my regression script depends on it, and I'm too lazy to change the
103 kes Start using structure assignments (not too happy about it ...).
104 kes Fix a bug in the tools Makefile that broke on Solaris.
105 kes Unload any autochanger drive during a 'release' command.
107 kes Enhance error message when restoring without bootstrap file.
108 kes Check restored size only for regular files.
109 kes Store Python job level in job record in Dir.
110 kes Add back code to open tape device nonblocking, but if rewind fails
111 release file descriptor.
112 kes Modify acquire.c to first try autoloading the device. Also, ask operator
113 to mount tape if drive cannot be opened.
114 rbn Made Windows service tray status windows resizable.
115 rbn Fixed horizontal scrolling of text in status window.
116 rbn Preserve horizontal and vertical scroll position while
117 updating. This prevents the display being reset to the
118 top line every 5 seconds.
119 rbn Fix Windows cross-compile compatibilty problems with
120 *nix variants such as OS X without the zic command.
121 rbn Eliminate dependency on man2html.
123 kes Update src/win32/dll/bacula.def for change in BPIPE definition for
125 kes Fix a compiler warning in compat.cpp
126 kes Change strcpy to bstrncpy in compat.cpp
127 kes Remove some broken code in bdb_list.c
128 kes Fix, hopefully the last, ACL problem in the restore command.
129 kes Update the README.mingw32
130 kes Add new version of upgrade-win32-client.txt to examples directory.
131 Submitted by Michel Meyers.
132 kes Print an INFO message in the job report when a Volume is marked Purged.
133 rbn Fixed handling of external program and script execution
134 so that the format of the command line is more flexible.
135 Now executable path names containing spaces are translated
136 to the equivalent short name automatically. The result is
137 passed to cmd.exe with the quotes removed.
139 kes Apply the recycle patch from Richard Mortimer.
140 kes Convert a few if statements in dev.c to switch statements.
141 kes Start using print_errmsg instead of bstrerror().
142 kes Print a job message in SD when a job is marked to be canceled.
144 kes All code added back. Fixed block.c read/write to loop only 3
145 times. This apparently keeps the OS from crashing (at least
147 kes The kernel bug still persists. Backup something then immediately
148 do a bscan on the same tape, and the kernel will crash.
149 kes Simplifed tape open(). It no longer uses nonblocking mode, which
150 means that opening with no tape loaded will probably take at least
151 6 minutes before an error is reported.
152 kes Do not use MTSETDRVBUFFER if not running as root. Do a MTRESET
153 when doing set_os_device_parameters.
154 kes Report open error in mount.c
155 kes Remove all .exe files from the installer directory on make clean.
157 kes Start adding back removed code.
158 kes Back out a number of changes because backups to tape crash my
160 kes Remove the inetd code from the File daemon.
162 kes Add -c option to pg_dump so that it initializes tables when
164 kes Fix FirstWritten time on Volume to be obtained from SD so that
165 it is the actual time the volume was first written.
166 kes Minor Makefile changes.
167 kes Handle EBUSY during read(). Improve how EBUSY is handled in write().
168 ebl Add yes keyword to prune/purge command
170 kes Correct a test in block.c that prevented restore of a DVD from
171 looking at the last part in the spool directory.
172 kes Make some error messages clearer mostly by using the word DVD
173 in the message. Improve infor message in read_record for DVDs.
174 kes Remove DVD kludges in dircmd.c label/relabel.
175 kes Move the dvd relabel code from dircmd.c into
176 write_new_volume_label_to_dvd() adding a relabel argument.
177 kes Rewrite the truncate_dvd() code to be much simpler and
178 more logical. First blow away any spool part, then create a
179 new empty part and write to the DVD.
180 kes Rewrite the can_write_on_non_blank_dvd() code making it
181 only ensure that no valid data is on the DVD -- i.e. it
184 kes Minor Makefile fixes.
185 kes Put attach_dcr_to_dev in a subroutine.
186 kes Make attaching/detaching to/from a device use a flag and
187 only detach if actually attached.
188 kes Add dvd-simulator.in to scripts directory and add to configure.
189 kes Fix code in acquire.c that checks fd != 0 to use dev->is_open().
190 This could be a cause of a number of drive reservation problems.
191 Note, this code is now in attach_dcr_to_dev().
192 kes Suppress doing Volume updates if it is a system job. This should
193 prevent the DVD label blocking.
194 kes Clear the freespace ok flag in a couple of strategic places.
196 kes Put removing zero sized spool part file in subroutine and
197 call from release_device().
198 kes Add Richard's patch for relabel to dircmd.c, but save and restore
200 kes Rework a lot of subroutines in dev.c to take dcr as an
201 argument. This is done to eliminate the usage of attached_dcrs
203 kes Change truncated_dvd to blank_dvd, which seems more suitable.
204 kes Apply most of Richard Mortimer's truncate patch.
205 kes Create lseek() method for DEVICE that takes dcr as an
206 argument. This is to eliminate the use of attached_dcrs in
207 lseek(). The calls to lseek_dev() must still be changed.
209 kes Apply Richard Mortimer's patches for printing an error
210 message in btape when a DVD is used, and to initialize traceback.
211 kes Added error message to btape when trying to access a file.
212 kes Move prototype of update_slots() to protos.h.
214 kes Add JobErrors, JobFiles, SDJobFiles, SDJobErrors, SDJobStatus,
215 and FDJobStatus to the Director Python variables.
216 kes Make sure valid argument passed to str_to_utime() where Arno
218 kes Apply Richard Mortimer's patch for bcopy, bextract, and bscan.
219 I.e. part of two different patches.
221 kes Modify disk changer to simulate some of the error conditions
223 kes Make sure the close() call in the SD tools is just before the
225 kes Implement dir_get_volume_info() in bls using the patch from
226 Richard Mortimer but call find_num_dvd_parts().
227 kes Implement find_num_dvd_parts() that mounts and scans a DVD
228 and counts the parts.
229 kes Move the omode code in open_dvd() up so that the cannot
230 write on blank disk can check can be bypassed for read mode.
233 kes Disable normal data spooling for DVD writing which uses
234 a different spooling mechanism.
235 kes Apply patch from Richard Mortimer to ensure that the number
236 of DVD parts is correctly updated.
237 rbn Save installer details log in the Bacula directory as
239 rbn Add installer generation of client and storage templates
240 suitable for @inclusion on the director.
241 rbn Mark previously installed Win32 components read-only since
242 deselection doesn't do anything.
244 Version 1.39.22 beta released:
246 kes Fix logic error in handling error return from mtx-changer
248 kes Make status from SD aware of -1 (unknown) Slot status.
249 kes At Eric's suggestion make both the 'slots' and 'drive' commands
250 to the Storage daemon work even if the drive is busy.
251 kes Make two separate Win32 menu links for starting bconsole and
252 wx-console in winbacula.nsi
253 kes Apply DVD part_spooled patch from Richard Mortimer
254 richm@oldelvet.org.uk
255 kes Put installer/Readme.txt into Win32 EOL format for Notebook.
256 rbn Fixed problems migrating settings from previous releases in
257 Win32 installer. Add Readme.txt with an option to show it on
258 the installer Finish page.
260 kes Use get_catalog_resource() to open catalog database
261 to ensure that ACLs are respected and that user is
262 correctly prompted for database.
263 kes Integrate multiple console/director patch from
264 Carsten Paeth calle@calle.in-berlin.de
265 ebl Add character substitution in Job/JobDefs WriteBootStrap.
266 You can use now 'WriteBootStrap = '/path/%c_%n.bsr''
267 kes Apply patch supplied in bug #656 to pass priority field
268 in the run dialog to the Director in gnome console
269 kes Restore DCR after VOL_NAME_ERROR in mount.c. Hopefully
270 this will fix bug #627 where Bacula eventually gets
271 confused about what Volume it wants.
272 kes Add a new close_part() class in the SD to save the device
273 state around open/close_part/open for DVD writing. This
274 should fix the num_dvd_parts getting zeroed as reported by
276 kes Apply patch from Richard Mortimer that correct edit code
277 for debug output of st_size.
278 ebl Add support of encrypted data stream to bscan.
279 display data_len instead of data content (may be binary)
281 kes Add dev->close() in dir_ask_sysop_to_mount_volume() in
282 bcopy. Fixes bug #669 reported by Eric.
283 kes Fix incorrect number of arguments in SQL statement in
284 sql_get.c as reported by Eric.
286 kes Update examples directory.
287 kes Remove unused variable in winservice.cpp
288 kes Make Win32 make command build installer.
289 rbn Add new Install Type page, used to select between Automatic
290 and Custom installs. Automatic installs only prompt for
291 configuration items that can't be reasonably defaulted.
292 rbn Added Bacula logo to page headers.
293 rbn Added Upgrade support
294 - Configuration and component selection are migrated from
296 - Configuration of upgraded components is preserved and
298 - Configuration of new components is handled according to
299 the Automatic / Custom selection.
300 - Component selection is defaulted to previously selected
302 rbn Installation of Server components is disabled on
303 Windows 95, 98 and ME.
304 rbn Added URLs for support, info and upgrades to Bacula entry
305 in Add/Remove Programs.
306 rbn Added Version info to Bacula entry in Add/Remove Programs.
308 kes Correct dvd code that breaks tape labeling.
309 kes Implement Enabled on update slots.
311 kes When doing a label, pass the VolBytes back to the Director,
312 which puts it in the catalog.
313 kes Print an error message if the user attempts to prune an
315 kes Need to start using %ld when sscanfing 32 bit values.
317 kes Correct the counting of VolCatBytes for DVDs.
318 kes Add code to mount.c to require that VolCatBytes corresponds to
319 what is actually found when doing an append.
320 kes Update freespace only after writing on the DVD.
321 kes Remove code that blows away the current part in the spool file.
323 kes Apply new dvd-handler patch from Richard Mortimer.
324 kes Tweak so that debug level 20 shows only DVD commands.
325 kes Correct spooled_part flag in dev.c close() so that it is cleared
326 when the spool file is deleted or does not exist.
327 kes Print part number in read_records when eof hit (restore).
328 rbn Installer default changed to start services on new install.
330 kes Make find with no args in tree restore return error rather than
331 stopping the selection. Fixes bug #665
332 kes Rework DVD writing to ensure that the last part is written
333 on open_next_part when dealing with a spool file.
334 kes Correct the lseek_dev() routine to handle end point correctly
335 (bug introduced by me).
336 kes Allow part number to exceed num_dvd_parts in lseek_dev().
337 rbn Change make_session_key on Windows to use WIN32 APIs to produce
339 rbn Add new tool scsilist.exe which displays the changer, tape and
340 CD/DVD (1394, SCSI, SATA, ATAPI) devices and the information required
341 to add them to bacula-sd.conf.
343 kes Apply dvd-handler patch from Richard Mortimer.
344 kes Apply dvd error check patch from Richard Mortimer.
345 kes Apply bpipe race patch from Richard Mortimer.
346 kes Rework how DVD labels are handled and set append only
347 when part > num_dvd_parts.
349 kes Rework many features of DVD writing and reading. Added many error
350 messages. Most importantly changed part to represent the current
351 part number base zero. This makes current DVD writing incompatible
352 with previous version.
354 kes Add host:port to connect failure messages to FD and SD from Dir.
355 kes Add WhereACL to console ACL list. If nothing is specified, only
356 the default is permitted for restore. Otherwise, *all* allows any
357 path, or you can specify permitted paths. This should allow control
358 over where users can restore files. This is untested.
359 kes Modified message to add a ? (as in loaded?) when querying the autochanger
360 for what Slot is loaded.
361 kes Fixed the use of Slot, so that is more correctly maintained, thus
362 eliminating unneeded duplicate calls to determine what Slot is loaded.
364 kes Install man pages with 'make install'
365 kes wx-console crashes because of differences between Bacula and wxWidgets
366 malloc()/free(). Tweak wx-console to use bmalloc()/bfree() for Bacula
368 kes correct improper indenting in wx-console/console_conf.c
369 kes update wx-console header copyrights
370 kes Fix bug #658 where wx-console mangles file/directory names containing
373 kes Add Media.Enabled flag to client backups for dotcmds.c
374 kes Enforce Media.Enabled=1 for a current restore to work.
375 kes Require restore case 3 to have sqlquery permission to work.
376 kes Remove obsolete del_MAC sql command.
377 kes Ensure that bscan creates Volumes with Enabled=1.
379 Version 1.39.20 beta released:
381 kes Correct missing Client table reference in SQL pointed out by
384 kes Fix Win32 build (new entrypoint, start baculafd).
386 kes Add -n option to bconsole to turn off conio.
387 kes Print JobIds to be migrated in Job Report.
388 kes Add additional user supplied notes to the messages part of
389 bacula-dir.conf concerning multiple email addresses.
390 kes Fix an incorrect comment pointed out by a user in dvd_handler.in
391 kes Add more recent Feature requests to Projects file.
393 kes Apply Maritn's fix to src/win32/Makefile.
394 kes Apply Martin's fix to configure.in for pthreads on FreeBSD 4.x
395 kes Implement pruning for Migration and migrated jobs.
396 kes Implement PoolOccupancy migration.
397 kes Implement PoolTime migration.
399 kes If doing a mount, look for a slot, and if specified pass it to
400 the SD so that it can load the autochanger.
401 kes Return DVD=1 flag if a label command is done to a DVD. This
402 permits setting VolParts to 1.
403 kes Apply DVD patch from Richard Mortimer <richm@oldelvet.org.uk>, but
404 rework ua_label code based on DVD media type to use DVD flag returned.
406 kes Eliminate some compile warnings in dird_conf.c
407 kes Format the bytes field in the terminated jobs part of the status
408 command for the three daemons with suffixes to reduce print size
409 of backup bytes. Suggested by a user.
410 kes When not descending into a directory, print the File= name that
411 triggered it -- makes why not descending a bit clearer.
412 kes Do not unload autochanger when doing a list command -- basic code
413 from Eric Bollengier.
415 rbn Reworked the MinGW32 build-dependencies script, it has been renamed
416 to build-depkgs-mingw32. It now handles two options -h to display
417 help and -C to reextract the source and apply the patches. The -C
418 option is useful for updating the source after new patches are
420 rbn Moved the 3rd party package URLs to a separate file External-mingw32.
421 This allows updating to new versions without having to modify the
422 script and makes it easier to figure out which packages and which
424 rbn Added a new script build-depkgs-msvc.cmd which does the same thing
425 as build-depkgs-mingw32 except they are built using Microsoft Visual C
426 and placed in the depkgs-msvc directory. There is also an
427 External-msvc file to describe the packages.
429 rbn Fix Windows cross-compile compatibilty problems with FreeBSD.
431 kes Fix bug #462 incorrect error message printed when client script called
432 from File= was not found.
433 kes Fix bug #558 (waiting for feedback) where Bacula needs too much time to
434 do a rewind on Solaris when no tape is in the drive (Solaris does not
435 have the detailed errno found on Linux). Added Solaris specific code.
436 Note, this may apply to other OSes as well.
438 kes Defined BUILDING_CATS in src/cats/cats.h so that *nix builds.
439 dsb Updated rpm spec for 1.39 - updatedb 9 to 10, add new man pages,
440 fix bug 648 - update sqlite script patches, lock out gnome2console
441 builds for platforms with gtk+ < 2.4.
442 Updated build_rpm.sh - add remote source directory, add switch for
443 signing, refine file names.
444 Updated spec file again for Mandriva build as they have this curious
445 custom of silently converting all manpages to bzip2 format just before
446 the final packaging step.
448 rbn Fixed the Windows Makefiles so that they won't accidentally try and
449 pickup binaries for the Unix build. This allows both the Unix
450 build and the Windows build to be built in the same tree without
451 interfering with each other.
452 rbn Fixed error handling and cleaned up mtx-changer.cmd.
453 rbn Added the rest of the database scripts. These are installed but are
454 not yet edited for variable replacement.
455 rbn Broke out the cats functionality from bacula.dll and put into new
456 separate dlls for each database type. At installation time the
457 correct one is copied to bacula_cats.dll.
458 rbn Eliminate the need to install the mysql.dll on client only builds.
459 rbn Moved dird/sql_cmds.c into the cats directory so all the database
460 specific #ifdefs were in the cats directory.
461 rbn Added a new sql_cmds.h with all the declarations for the variables
462 exported from sql_cmds.c.
463 rbn Moved catalog_db[] from lib/message.c to a new routine db_get_type()
464 which is implemented in bdb.c, mysql.c, postgresql.c and sqlite.c in
466 kes Correct improperly formatted list command output reported by Dan.
468 kes Correct despool time calculation.
470 kes Remove previous changes to compat.cpp as they create problems.
471 kes Use old style MD5 for FileSets to avoid Full saves on every Job.
472 kes Attempt to fix problems with the msg_queue crashing on Solaris
473 when Bacula is terminating, but problems remain.
474 kes Add WIN32_VSS to HAVES in src/Makefile.inc.in to correct VSS
475 name editing problems with too many \\?\es.
476 kes Fix some Bacula source code style problems in compat.cpp.
477 kes Add debug code to compat.cpp and convert non-Bacula debug code
480 kes Change the name of the technical notes file from kes-1.39 to
481 technotes-1.39. Prefix my messages with 'kes '.
482 kes Allow dequeue_messages() to be called twice. Should fix bug
484 kes Add Job type to bscan Job information output.
486 kes Update copyright date in program files, and for the most part
488 kes Implement %q in bsnprintf.c apparently I forgot it.
490 kes Make disk-changer sed command compatible with FreeBSD.
491 kes Make a first cut at a ReleaseNotes and ChangeLog for a
493 kes Make make clean descend into the src/win32 directory.
494 kes Fix some #ifdefing so that Solaris and FreeBSD compile
495 sys/stat.h was turned off.
496 kes Use suffix editing for new transfer rate messages.
497 kes Attempt to come up with a workaround which seems to be an OS
498 bug where write() returns EBUSY. IMO this should not happen.
499 It triggered in truncatebug test. The workaround retries using
501 kes Eliminate a strerror() call in a class method that failed with
503 kes Use rm -rf rather than rmdir to delete the src/win32/release
504 directory during make clean.
506 kes Make bscan ignore ACL streams.
507 kes Update projects files with new Feature Requests.
508 kes Generate current English and French manuals and upload
510 kes Update the home page to include the new British/French flags to
511 switch between translations. Work done by Alexandre Baron.
512 kes Make disk-changer script print an error message if the changer
513 directory is not defined.
514 kes Create a generic DB routine for getting an int (32/64 bit) from
516 kes Add more migration code.
517 kes Add a few more files to .cvsignore here and there.
518 kes Minor fixes for SD write rate and despooling rate.
519 kes Turn off new test code in src/console.c
523 kes Incremented the version number to signify that all of Robert's code
524 for Win32 that was in the branch is now integrated into the HEAD,
525 and that Eric has submitted code that we hope will provide limited
526 backward compatibility with 1.38 file daemons (more testing to be
528 kes I rationalized a few of the names of the variables (mainly jcr names)
529 that are used during migration as keeping three different jcrs at the
530 same time clear in ones head is not easy.
534 eb Tweak new runscript feature to work with 1.38.x FDs.
535 eb Correct crypto.c to fix segfault when restoring an encrypted stream
536 on fd which don't use rsa keys.
537 eb Add yes/no English keywords on localized yes/no questions.
539 kes Several important commits from Robert Nelson for code cleanup and
541 kes Modify console.c so that when conio is enabled, it converts \n to
542 \n\r before outputting to the console. Hopefully this will fix
543 the problems with expect in Perl that Eric saw.
545 kes Change cats/sql.c to eliminate %-*s format, which I think is turned
547 kes Add Comment field to llist of a volume.
548 kes Allow true/false in some yes/no questions.
549 kes Implement update volume enable=(on|off|true|false|archived|0|1|2)
550 kes Remove a few /n's when scanning commands from another daemon. This
551 permits adding additional fields later.
552 kes Modify dbcheck to handle ctl-d and to delete Log table entries.
553 kes Update README.mingw
555 kes Tweak authentication to work with 1.38.x FDs.
556 kes Tweak catalog make scripts.
557 kes Fix catalog upgrade scripts so that they work.
558 kes Correct despooling debug code to eliminate race condition.
560 kes Add additional fields as specified by Arno to LocationLog.
561 kes Add comment field to the Media record.
562 kes Add Time field to the Log record.
563 kes Correct migration SQL (thanks to Bill Moran) so that it
564 runs with PostgreSQL also.
565 kes Add spooling/despooling info in status output of SD.
567 kes Spend a lot of time integrating mkcdrec with the rescue disk.
568 kes Add VOLMGMT message class for volume management messages (none yet).
569 kes Add CATALOG as a destination. It goes into the LOG table.
570 kes Implement the Log table in the DB.
571 kes Implement the Location Log table in the DB (for user use).
572 kes At Eric's request add a run_scripts() just after blast_data in
575 kes Add Enabled column to Location, correct some typos in DB schemas.
576 kes Correct bug I introduced into RunScripts enum.
577 kes Add log table to Catalog
578 kes Purge original job migrated if the migration terminates normally.
579 kes Cleanup purging of files/jobs so that it is done only in a
581 kes Add new VOLMGMT message class.
582 kes Add Catalog message destination (user conf code remains to be written).
584 kes Modify read_record and friends to properly deal with migration
586 kes Update debug code in read_record.
588 ======================= Warning ==========================
589 Separate read and write storage in Jobs in the Director. This
590 is a major rewrite of some of the low level code and hence has
591 a high probability of introducing bugs.
592 ==========================================================
594 kes Move the job init code up to *before* the job is put into
595 the job queue (resource allocation queue). This permits the
596 job to establish whether it will read or write or do both.
597 kes Add name() methods to all the resource classes.
598 kes Implement separate read and write storage resource
599 allocation/deallocation in jobq.c
601 ======================= Warning ==========================
602 Implemented new method of getting the default Storage from the Media
603 record rather than from the MediaType for restore. As a fall
604 back, if no Storage is defined, use the MediaType. This
605 eliminates most all prompts if there are multiple MediaTypes
606 used. This is an important and fundamental change.
607 ==========================================================
609 kes Add more detail (Storage, Device) to list of volumes printed
611 kes More code in migrate. In particular start multiple jobs if
613 kes Probably overkill, but ensure that the bsr is unique even within a
615 kes Rework bsys.c drop() so that it now should work as expected.
616 kes Update a bunch of old copyrights -kes particularly in .h files.
617 kes Remove src/lib/bshm.c/h
621 ======================= Warning ==========================
622 All hash codes in the database are now kept in world
623 compatible base64 format (no = filling). This means that
624 all FileSets will be updated and if you are running
625 verify jobs, you must do an InitCatalog.
626 Authentication uses the new algorithm, but should be
627 backward compatible with 1.38.x
628 ===========================================================
630 kes Modify the authentication routines so that the 1.39.15 Director
631 always runs with the compatible binary to base64 code (same as
632 the rest of the world). It will however detect if an SD or
633 FD is running the old code and if that is the case, will use
634 the old algorithm for authentication. However, all consoles must
635 use the compatible algorithm, and all data entered into the database
636 (all hash signatures, MD5, SHA1, ..., and all FileSet hashes) will
637 use the compatible algorithm.
638 kes Rename the cram_md5 routine names to be slightly more appropriate
639 to what they are doing (challenge and respond).
640 kes Robert committed his #ifdef and header cleanup.
642 kes Fix a compiler warning in files/backup.c
643 kes Cleanup NOT NULL vs DEFAULT 0 in database creation.
645 kes Robert committed his low impact changes.
646 kes I removed a size_t from the jcr.h definition.
647 kes Update the tape regression scripts (still to be tested).
648 kes Add gcc and gcc-c++ requires to srm as suggested by a user.
649 kes Require done or quit to exit from in memory tree restore.
651 kes Write install/uninstall of new manpages. There are now a
652 pile of man pages. Some of which need a lot of work.
654 ======================= Warning ==========================
655 The --mandir ./configure option now points to the top level
656 man directory. The man files will be installed under
657 mandir/man8 and mandir/man1 as appropriate.
658 ==========================================================
660 kes Add complete text of GPL to LICENSE.
661 kes Implement job report that indicates where Storage and Pool
662 came from -kes with overrides and Pool storage and NextPool,
663 it is all very complicated.
664 kes Create a few common subroutines for backup.c and migrate.c
665 kes Eliminate warning messages from tray-monitor.c
667 kes Apply fix for scheduler for missing unlock_jobs().
668 kes Clean out autoconf caches before rebuilding configure
669 kes Fix the FreeBSD pthreads lib define updated by Dan.
670 kes Add missing semicolon in src/console/console.c
671 kes Add Robert's enhanced version of build-win32-cross-tools
672 as well as his patch file.
673 kes Note, the new gcc options are likely to break building of
674 wx-console or the tray-monitor ...
676 kes Implement Robert's suggestion to suppress printing compile lines.
677 kes Detect GCC correctly (I hope)
678 kes If using GCC (actually g++) add the following compiler flags
679 -fno-strict-aliasing -fno-exceptions -fno-rtti
681 ===================== Warning =============================
682 Turn on new bsnprintf() code. This could cause print output
684 ===========================================================
686 kes Fix crypto when not using openssl. I previously overlooked this.
687 kes Eliminate crypto type punning problems by eliminating void * and
688 using uint8_t * instead.
689 kes Harden authentication failure in FD by single threading errors
690 and forcing a 6 second wait.
692 ===================== Warning =============================
693 Removed 'Accept Any Volume' directive.
694 ===========================================================
696 kes Major cleanup and simplification of regress using shell functions
697 (more tests to be converted to new format)
698 kes Add detection of 64 bit Irix as indicated by user.
699 kes Increment catalog database id from 9 to 10.
700 kes Add a few of the new database fields to the various C++
702 kes Implement code to fill in the most important new fields (e.g.
704 kes Ensure that most of the new fields are in create/get/insert/update.
705 More work to be done.
707 kes Update some very old licenses in src/cats.
708 kes Modify the database format for handling Migration jobs:
709 Add PriorJobId, RealEndTime to Job table
711 Remove Stripe from JobMedia record (not used, wasting space)
712 Add ScratchPoolId, RecyclePoolId, Enabled to Media record
713 Add Cost to Location table.
714 kes Delete mac_record subroutines.
715 kes Add new table values to create/update/get routines as appropriate.
716 kes Update the update_tables and make_tables scripts.
717 kes Make a first cut in using a union where multiple pointers (actually
718 pointers to pointers) are stored.
719 kes Make some changes to base64.c suggested by Robert and others and add
720 a small amount of documentation.
721 kes Add some changes suggested by Peter for Solaris (bregex...)
722 kes Make runscript.h always built because it needs to be pulled into
723 more places. In particular its RES was left out of a union.
724 kes Renumber the enum{} list in runscript.h to avoid starting from zero.
725 This makes it slightly easier to detect uninitialized variables.
727 kes Remove xpg4 lib from FreeBSD build as it is no longer needed and
728 sometimes creates install problems.
729 kes Change a couple of %T in strftime to %H:%M:%S as seen in Robert
730 Nelson's code. More to do.
731 kes Convert a few store_bit to store_bool in filed_conf.c.
732 kes DVD tweak to block.c as supplied by Uwe Muessel.
734 kes Modify configure.in to check for typeof().
735 kes In findlib/attribs.c use typeof instead of templates if possible.
737 kes Implement partial error messages for src/filed/acl.c
738 kes Fix return code to fail when doing update barcodes and
739 Pool resource is not found. This previously caused Volumes
740 to be labeled as cleaning tapes.
741 kes Small updates to projects.
743 kes Add Eric Bollengier patch for new RunScript directive. It breaks
744 compatibility between dird and fd.
746 kes Prevent DVD code from rewriting label if the device cannot be
748 kes Used __GNUC__ to detect GNU g++ as suggested by John Goerzen to
749 fix Debian build bug.
750 kes Fix Dir/SD run race in migrate.c, verify.c, and restore.c
751 kes Integrate manpages contributed by Jose Luis.
752 kes Update projects file.
753 kes Add manpages Makefile.in to configure.in
754 kes Remove installation of bacula.8 in scripts directory.
756 kes Implement patch submitted by cesarb in bug #606 to implement O_NOATIME
758 O_NOATIME is a open() flag which makes it possible to read a file without
759 updating the inode atime (and also without the inode ctime update which
760 happens if you try to set the atime back to its previous value). It also
761 prevents a race condition when two programs are reading the same file, but
762 only one does not want to change the atime. It's most useful for backup
763 programs and file integrity checkers (and bacula can fit on both
766 Recent versions of the Linux kernel and glibc have support for it (the
767 glibc support being mostly copying the O_NOATIME definition to
768 bits/fcntl.h). If there's no support for it on the kernel, trying to use
769 it does nothing (since the kernel ignores unknown flags).
771 If the kernel has support for it, trying to use it either works, fails
772 silently (mostly in remote filesystems), or returns errno=EPERM (if you
773 are not either the owner of the file or root). A simple way to prevent the
774 failure is to open the file without the flag and set it later with
775 fcntl(F_SETFL), ignoring any EPERM errors.
776 kes Applied patch posted by Jaime Ventura to bug #570 to correct failure
777 of restarted jobs to complete (due to a destroyed pthreads conditional
778 variable used by the message thread).
779 kes Fixed bug #619 where Bacula would not restart jobs with MaxRestartTimes
781 kes Apply patch from John Goerzen bug #611 to fix bad manual links in the code.
782 kes Apply patch from Rudolf Cejka bug #614 to removed trailing
783 colons in query.sql file.
784 kes Apply patch from Rudolf Cejka bug #613 to correct prunning of files
785 not to create orphans.
786 kes Apply patch from Rudolf Cejka bug #617 to use mtime instead of ctime
787 in restore long listing.
788 kes Apply patch from Rudolf Cejka bug #609 to use MarkId in verify.c instead
789 of incorrect MarkedId.
790 kes Apply patch from adioso bug #616 to correct text in manual (replace
791 Director with File daemon).
792 kes Rework a few of the zlib changes so that they build properly.
795 kes Move DIR 'run' command to SD before starting the message thread
796 as suggested by Cristopher Hull to avoid a race deadlock from
797 two threads using the bsock structure.
798 kes Modify LICENSE to correct some problems pointed out by Debian.
800 kes Correct EOF with no \n lex.c problem.
801 kes Tweak compat.h compat.cpp and merge with apcupsd
802 kes Add additional INFO messages if autochanger cannot be used.
805 kes Simplify Win32 Makefile
806 kes Correct count of buffers/bytes used by smartall.c
807 kes Updated compat.h after porting apcupsd to MinGW.
809 kes Work on getting wx-console building on MinGW. wxWidgets now builds
810 started adding Makefile ...
811 kes Moved MinGW library objects to src/win32/lib to reduce clutter.
813 kes Reloading a bad configuration file doesn't kill director any more.
814 Thanks to fix from Eric Bollengier.
816 kes Fix problem of accents with new Win32 code.
817 kes Integrate Howard's VSS patch. Tweak it a bit. VSS now
818 works in the MinGW build with the exception that there
819 is a problem with accented characters -kes i.e. there is
820 some mapping problem with wide characters.
821 kes The code no longer compiles with Microsoft VC++.
823 kes Start implementing Christopher's St.Bernard code.
824 kes Add Christopher's mods for opening files.
825 kes Strip \r \n from Win32 error messages (Christopher)
826 kes Add more info about Win32 system if unknown (Christopher)
827 kes Use bstrn(cpy, cat) routines to avoid overrun in compat.cpp
828 kes Fix a number of incorrect strings marked for translation, when
829 they should not be (e.g. commands).
830 kes Fix StartTime bug reported for ClientRunBeforeJob and RunBeforeJob
831 Patches supplied by user in bugs #608 and #599.
832 kes Use most recent of st_ctime and st_mtime in restore tree DIR
833 listing. This fixes some problems with Win32 printing incorrect
835 kes Correct the clock shift comm time calculation between the DIR
836 and the FD. It was added rather than subtracted.
837 kes Strip all backslashes in filenames to be restored on Win32
838 machines -kes the names should all be in Unix format, and if
839 there are any backslashes it is most likely due to an improper
840 FileSet definition, and the files will not otherwise be
842 kes Remove lib/regex.c (replaced by bregex.c).
843 kes Delete src/win32/License.txt
844 kes Modify installer to install LICENSE
846 kes Fix bug in build-win32-cross-tools script reported by Howard
847 kes Implement cross compiled bconsole
849 kes Fix barcode test, eliminate BOOL (doesn't exist on Linux).
850 kes Write first cut of README.mingw32
851 kes Add back ua_label barcode fix from Rufolf Cejka.
852 kes Integrate the majority of the Mingw cross-tools submission
853 made by Howard Thomson. Everything compiles, with zlib, openssl,
854 and VSS turned off. Linking needs a pthreads library ...
856 kes Add 'Dir Status' button to the gnome console.
857 kes More work on migration.
858 kes Restore non-compatible base64 coding to permit compatibility.
859 kes Display heap stats in Storage daemon without debug level.
861 kes Integrate most of the MinGW changes -kes more to do.
863 kes Implement using pg_config for finding PostgreSQL files.
864 Fixes bug #600. Patch supplied by user.
865 kes Remove -t option from mktemp in mtx_changer.in and use
866 working directory. Fixes bug #578.
867 kes Update job start time after the any run before job so that
868 files created by the script are only backed up once. Fixes
870 kes Strip trailing newline only from filenames entered in
871 the restore command when reading a file. This permits
872 the user to enter filenames with trailing spaces. Fixes
873 bug #549. The user supplied a patch that I modified slightly.
874 kes Use the most recent time (st_mtime, st_ctime) in the dir
875 command in restore. This gives the user a better idea of what
876 the newest file really is. This fixes bug #574. The fix
877 was suggested by the user.
878 kes Implement a compatible version of base64. This permits external
879 programs to duplicate Bacula's base64 algorithm using standard
880 routines. This fixes bugs #296, and 565. Patch submitted by
882 ================= Note ========================
883 Previous Signatures stored in the database are no longer
884 compatible with this. The main downside is for Verify jobs,
885 and doing an InitCatalog run will fix the problem. Also, the
886 authentication between the deamons is changed, so all daemons
887 must be simultaneously upgraded.
888 ==============================================
889 If you don't like this fix, set:
890 const bool compatible = true;
892 const bool compatible = false;
895 kes Ensure that DB signature is never NULL.
896 kes Ensure that DB table names are not translated.
897 kes Fix scheduler to handle time skew (eg daylight savings).
898 kes Fix scheduler to use lock_jobs() to avoid most problems
899 with reload. Window is now milliseconds.
901 kes Apply patch from Christopher Hull
902 kes Allow multiple connections to database with different
904 kes Invalidate the scheduler when doing a reload. Fixes seg
905 fault, but still 60 second window.
906 kes Additional info in Reschedule message.
907 kes Use set_jcr_job_status() everywhere to prevent loss of
909 kes Display peer IP in FD if error from connecting DIR.
910 kes Don't increment file count for DIRBEGIN.
911 kes Replace illegal characters in Win32 filename by _.
912 kes Add SE_CREATE_PERMANENT_NAME privilege in Win32.
913 kes Hash hard link filenames rather than linked list.
914 kes Fix for security failure in chdir on Win32.
915 kes Add CreateDirectoryA/W win32 API entry points.
916 kes Add /silent option to Win32 FD for Install/Remove service.
917 kes Always print Heap statistics in FD.
919 kes Remove the -f option from the chown in Makefile.in for more
921 kes Change setting the group in Makefile.in to use chgrp for
923 kes Implement a write_store and read_store to replace
924 dirstore in reserve.c
925 kes Implement a Bacula read/write lock for Python rather
926 than using the Python lock to avoid recursive problems.
927 kes Correct the uninstall directory names in filed/Makefile.in
928 as reported by a user.
930 kes Correct some problems with database creation (new tables).
931 kes Replace a bunch of old 0x%x by %p.
932 kes Get first cut of Migration with Job selection working.
934 kes Change store_bit() to store_bool() for the Spooling in
935 dird_conf.c -kes bug reported by Robert Nelson.
937 kes Correct Makefile bug found by Dan Langille.
939 kes Correct Makefile for Solaris /bin/sh
940 kes Correct mtx-changer.in for Solaris /bin/sh
941 kes Abort if a conf resource does not have a Name =
943 kes Change the name of the regex program to bregex.
944 kes Add the bwild program to the tools directory. It is similar
945 to the bregex program.
946 kes Implement create bregex.h and bregex.c in src/lib from the
947 Python regexp program.
948 kes Use the new bregex.c to implement Regex expressions on Win32.
950 kes More work on migration.
951 kes Implement wild program in tools directory for testing
952 wild-cards. Almost identical to the regex program.
953 kes Up port VSS single thread locking code.
954 kes Replace N_(..) by NT_(...) to inhibit translation of
956 kes Modify Makefile to change the permissions on Working Directory
957 to 770 if the directory is created.
958 kes Do not fail the Makefile if changing the permissions or
959 owner/group on WorkingDir fails.
960 kes Remove early selection of Scratch Volumes in the recycling
962 kes Correct the old recycling algorithm so that Scratch Volumes
963 are selected when looking for a Volume in the changer.
964 kes Correct a typo in the Verify SQL reported by Joe Park.
966 kes Remove automatic case folding on Windows FDs. You must
967 explictly use the 'Ignore Case = yes' option.
968 kes Remove the code added to 1.38.6 and 1.38.7 that pulls a
969 scratch volume in an Autochanger early in the 'recycling'
972 kes Make weof() and clrerror() methods of class DEVICE.
974 kes Tweak license to include Microsoft restrictions.
975 kes Move mysql.reconnect to after real_connect(). Thanks to
976 Frank Sweetser for the patch.
977 kes Disallow a backslash in a File = directive (Windows junk)
978 unless the string is quoted.
979 kes Apply Eric's patch to ua_label.c so that daemon protocol
981 kes Add NT_ definition for strings that should not be translated.
982 kes Apply NT_() to ua_label.c
983 kes Remove timed wait for VSS on Win2K3 as it is not yet
985 kes Correct bacula.in script to reference bacula-ctl-xx in the
986 sysconfig directory rather than the bin directory.
988 kes Fix a long standing bug in the bacula start/stop scripts.
989 kes Attempt to add the new bacula-ctl-* files to the rpm.
990 kes Switch to using typeof() for list traversing to avoid
991 as many FC5 g++ compiler warnings as possible.
993 kes Split the bacula start/start script into four files:
994 bacula -kes starts and stops calling other scripts
995 bacula-ctl-dir -kes starts/stops the director
996 bacula-ctl-fd -kes starts/stops the File daemon
997 bacula-ctl-sd -kes starts/stops the Storage daemon
999 kes Create datestyle fix for PostgreSQL. Fixes bug #574.
1000 kes Correct editing of JobId from int to int64 in fd_cmds.c
1001 kes Eliminate FileSet name race with bash_spaces() and multiple
1002 threads by bashing in a local.
1003 kes Fix error return from 'use storage' to print a correct error
1004 message rather than nothing.
1005 kes Correct false re-read last block error message when two jobs
1006 are simultaneously writing at the end of a tape.
1007 kes Simplify exit conditions in the reserve.c code to avoid
1008 possible non-release of reservation_lock().
1009 kes Suffle lock order in reserve to avoid deadlock between
1010 reservation lock and device mutex.
1012 kes Initialize jcr mutex before first use. Thanks to Thorsten for
1013 tracking this down for me !!!! as it broke the Win32 build.
1015 kes Integrate addition of line count limitation to bsmtp -l from
1016 Sebastian Stark <stark at tuebingen.mpg.de>
1018 kes Implement regex test program in tools directory.
1019 kes Attempt to fix time problem with bsmtp with foreign langs.
1020 kes Add strip_trailing_newline() submitted by user.
1021 kes Implement regex matching in migrate.c
1023 kes Fix bug #537 to allow arbitrary time to mount a volume for
1024 restore, if polling is turned on.
1025 kes If dir_user or dir-group is specified in ./configure apply it to
1026 the working-dir. Fixes bug #533.
1027 kes If rescheduling a job cancel the previous incarnation with the SD.
1028 Fixes bugs #566 and 557.
1029 kes Fix bug #567 do_message() definition type conflict.
1032 kes Add more jcr methods and make mutex and use_count private.
1033 kes Create lock/unlock methods for jcr.
1034 kes Fix PostgreSQL bug doing sql_data_seeek() by explicitly reading
1035 records to get to seek position.
1036 kes Integrate patch from bug #561 to correct conio.c signal definitions.
1037 kes Fix Rescheduling failed Jobs. Ensure that SD message thread
1038 terminates correctly by doing pthread_kill(). Do not destroy
1039 SD cond wait variable between executions of the job. Use local
1040 mutex for cond variable to avoid blocking jcr chain. Fix poor
1041 use of jcr use count in jobq.c for restarted jobs.
1042 kes Fix obsolete usage of foreach_dlist() to use foreach_jcr() in
1043 lib/jcr.c -kes prevents locking the jcr chaing.
1044 kes Apply patch from bug #564, which corrects listing volumes with
1045 multiple autochangers. Apply same fix to next volume list.
1046 kes Fix bug #562 where restore bootstrap file is not unique.
1047 kes More details in implementing David's migration syntax proposal.
1048 kes Save and restore dcr when swapping drives so that if we have
1049 a write dcr it is not lost.
1050 kes Use new routine lock_reservations() to lock the reservations
1051 system, and call it while looking for a volume in askdir.c.
1052 This could possibly fix bug #543.
1053 kes Stop SD command loop if job is canceled.
1056 kes Remove old code from findlib/create_file.c
1057 kes Rename mac.c migrate.c
1058 kes Add user friendly display of VolBytes in job report.
1059 kes Rename target... to previous... to make it a bit easier to
1061 kes Add selection type and selection pattern to Migration (idea
1062 given by David Boyes).
1065 kes The po files should now be current.
1066 kes Fix new sql_use_result() code to properly release the
1067 buffers in all cases.
1068 kes Use the keyword ujobid to mean the unique job id; job or jobname
1069 to mean the Job name given on the Name directive, and jobid to
1070 be the numeric (non-unique) job id.
1071 kes Allow listing by any of the above.
1072 kes Add the user friendly job report code for reporting job elapsed time
1073 and rates with suffexes from John Kodis <kodis at comcast.net>.
1074 kes Add Priority and JobLevel as Python settable items.
1075 kes Use TEMPORARY table creation where the table is created by
1077 kes Add new code submitted by Eric for waiting on specific jobid.
1078 kes Add ACL checking for the dot commands.
1079 kes Fix restore of writable FIFOs.
1080 kes Fix a bug in bpipe where the string was freed too early.
1082 kes Modify the Python class examples to inherit object -kes new way
1083 of defining classes. Patch from Felix Schwarz.
1084 kes Implement jobuid to replace old usage of job in keywords as
1085 suggested by Eric Bollengier.
1086 kes Apply patch for enhancing wait from Eric Bollengier. On can now:
1087 wait (wait for all jobs to stop)
1089 wait jobuid=unique id
1091 kes Implement write variables for Python to set Priority (anytime), and
1092 Job Level, only during JobInit event.
1094 kes Fix the block listing bug pointed out by Arno.
1095 kes Update the po files at Eric's request.
1097 kes Fix Maximum Changer Wait, Maximum Open Wait, Maximum Rewind Wait to
1098 accept time qualifiers.
1099 kes Make catalog respect ACL.
1100 kes Add recycle count to Media record.
1102 Changes to 1.39.6-beta1 24Feb04
1104 kes Add Rudolf Cejka's new rc-chio-changer.
1105 kes Implement pulling Volume from Scratch Pool if the
1106 Volume is in the autochanger.
1107 kes Implement additional command arguments for update Volume.
1111 kes Back port changes to 1.38.5
1112 kes Fix recycle SQL for StorageId.
1113 kes Fix misplaced quote in mtx-changer script.
1115 kes Note. Your database must be updated, or you must create
1116 a new database. I have not yet incremented the database level.
1117 kes Add Location table.
1118 kes Add LocationId, DeviceId, and MediaTypeId to Media record.
1120 kes Implement create/get mac record in database for adding extended
1121 Migration data to the job record.
1122 kes Add new MAC table to update/make database scripts.
1123 kes Return Storage name used when getting VolumeNames for a job.
1124 kes Change bsr file keyword Storage to Device, which is more accurate.
1125 kes Ensure that Mac records are pruned/purged.
1126 kes Tweak SD tools to deal with changing media type.
1127 kes Integrate more dev.c subroutines as methods (e.g. strerror, bsr, ...)
1128 kes Pass pointer to dcr pointer to acquire_device_for_read() so
1129 that the subroutine can switch devices, and hence dcrs.
1130 kes Modify the multiple MediaType read code to re-use the same
1131 dcr when switching devices. This makes the code much more
1133 kes Integrate patch from Karl Hakimian that reads JobIds, FileIndexes
1134 from a table for restore.
1135 kes Add Storage name to VolParams, but it really should be Device.
1137 kes Add disk-changer to scripts directory + configure/Makefile
1138 kes Eliminate PoolId from jcr -kes it is in jcr->jr.PoolId
1139 kes Implement store_bit scanner to replace store_yesno. Mostly done.
1140 kes Implement new store_bool that stores in a bool.
1141 kes Add true/false to yes/no conf directives.
1142 kes Make first cut at changing appropriate store_yesno to store_bool.
1143 kes Complete implementation of Pool storage devices.
1144 kes Move starting clones to job.c
1145 kes Move create_restore_bootstrap_file() to job.c
1146 kes Make copy_storage() more general to be able to handle
1148 kes Cleanup a lot of migration code for manual running, including
1150 kes Move getting a scratch Volume into a subroutine.
1151 kes Make all places a Volume that is added to a pool to
1153 kes Fix bug in autochanger recycle code (improper edit 64 bit).
1154 kes Fix segfault in restore command when no value specified.
1155 kes Start adding code to handle multiple MediaTypes in restore.
1156 kes Eliminate race condition in getting Volume name for
1157 two drive autochanger.
1158 kes More debug code in autochanger.
1159 kes Add storage keyword to bootstrap file, add parsing.
1160 kes Move slot in bsr file into Volume record as there will be
1161 a different slot for each Volume.
1162 kes Create reserve.h
1164 kes Implement Pool storage overrides.
1166 kes Implement first cut of Migration.
1167 kes Implement mysql_use_result() from patch by Karl Hakimian.
1168 This reduces significantly the memory consumption during
1169 the restore tree building, and hence runs faster too.
1170 kes Implement StorageId patch supplied by user (reggie) in bug
1171 #536. This should permit Bacula to work correctly with two
1173 kes Implement Job listing variations suggested by a user.
1174 kes Move updating bootstrap code in backup.c to subroutine
1175 update_bootstrap_file().
1176 kes Add new job status elapsed time and bytes written user
1177 friendly job report output patch sent by John Kodis
1178 <kodis at comcast.ne>.
1179 kes Implement a storage list in Pools.
1180 kes Separate out setup_job() code from run_job().
1181 kes Get migration working -kes lots of changes in mac.c in both
1183 kes Apply patch from user (Eric Bollengier I think) that fixes a
1184 DIR crash when no arguments are supplied to a dot command.
1185 kes Fix typo (strcpy->strcmp) in ua_prune.c as reported by Martin.
1186 kes Fix command arg name->volume in label command of gnome-console.
1187 kes Fix SD acquire.c to release correct DCR by explicitly testing
1188 on the dcr address rather than trying to devine if it is a read
1189 or write dcr. This failed in error conditions when the device was
1193 kes Apply user supplied patch for more readable rate output
1195 kes Continue implementing migration.
1196 kes Implement support for removable filesystems in SD.
1197 kes Ensure that btraceback scripts can be read by anyone.
1198 kes Replace dvd-freespace and dvd-writepart by dvd-handler.
1199 kes Correct bug where canceling restore before the FD contacts
1200 the SD causes the drive to be left in read mode.
1201 kes Move ofline_or_rewind into DEVICE::close().
1202 kes Eliminate close_device.
1203 kes Convert several dev subroutines to methods (e.g. bsf,
1205 kes Eliminate force_close_device().
1206 kes Implement Device Type directive in Device resource that
1207 can have values File, Tape, Fifo, DVD, or Prog.
1208 kes Add has_cap() method to Device.
1211 kes Add patch from bug #527 to allow RedHat user to specify
1212 options/user/group for starting each daemon in
1213 /etc/sysconf/bacula.
1215 kes Add two new queries to query.sql provided by Arno. One
1216 list volumes known to the Storage device, and the other
1217 lists volumes possibly needing replacement (error, ...).
1219 kes Add periodic (every 24 hours) garbage collection of memory
1220 pool by releasing free buffers.
1222 kes Correct bug counting sized (for display only) in smartall.c
1223 kes Print FD mempool stats if debug > 0 rather than 5.
1225 kes Make db_lock() mutex error fail the job rather than abort
1226 Bacula. Canceling the job caused the mutex to fail.
1227 kes Correct bug in alist.c that re-allocated the list if the
1228 number of items goes to zero.
1229 kes Move the reservation system thread locking to the top level
1230 so that one job at a time tries all possible drives before
1232 kes Implement a reservation 'fail' message queue that is built
1233 and destroyed on each pass through the reservation system.
1234 These messages are displayed in a 'Jobs waiting to reserve
1235 a drive' list during a 'status storage='. Note, multiple
1236 messages will generally print for each JobId because they
1237 represent the different problems with either the same drive
1238 or different drives. If this output proves too confusing
1239 of voluminous, I will display it only when debug level 1
1240 or greater is enabled in the SD.
1242 kes Add enable/disable job=<job-name>. This command prevents
1243 the specified job from being scheduled. Even when disabled,
1244 the job can be manually started from the console.
1245 kes During 'update slots' clear all InChanger flags where the
1246 StorageId is zero (old Media records).
1248 Beta release 1.38.4:
1250 kes Fix autochanger code to strip leading spaces from returned
1251 slots number. Remove bc from chio-changer.
1252 kes Back port a bit of 1.39 crypto code to reduce diffs.
1253 kes Fix first call to autochanger that missed close()ing the
1254 drive. Put close() just before each run_program(). Fixes
1257 kes Add PoolId to Job record when updating it at job start time.
1259 kes Pull in more code from 1.39 so that there are fewer file
1260 differences (the new ua_dotcmds.c, base64.h, crypto.h
1261 hmac.c jcr.c (dird and lib) lib.h md5.h parse_conf.c
1262 util.c. Aside from ua_dotcmds.c these are mostly crypto
1264 kes Implement new method of walking the jcr chain. The
1265 incr/dec of the use_count is done within the walking
1266 routines. This should prevent a jcr from being freed
1267 from under the walk routines.
1272 kes Start implementing Verify list output.
1273 kes Move the suitable_drive flag to a better place to prevent
1274 premature termination of the reservation if all drives
1275 are busy -kes should fix Arno's diff/inc pool failures.
1277 kes Add mutex to single thread VSS code in Win32.
1279 kes Simplify code in askdir.c that waits for creating an appendable
1280 volume so that it can handle multiple returns from the wait
1282 kes Modify the wait code to permit multiple returns.
1283 kes Return a zero when 'autochanger drives' is called and
1284 it is not an autochanger.
1285 kes Make rewind_dev() a method taking a DCR as an argument.
1286 This permits closing and reopening the drive if the
1287 rewind fails as happens if the drive was loaded while the
1288 file descriptor was open. This refreshes the file descriptor.
1289 kes Remove the ST_OPENED flag and always rely on fd < 0 for knowing
1290 if the device is open or not. This should eliminate
1292 kes Return error if reserve cannot find at least one suitable device.
1293 kes Make wait_for_sysop() return correct state information.
1294 kes Fix Win32 state file problem. write was not using compat
1295 code. This should fix bug #500.
1297 kes Modify gui on command to set only GUI mode and not batch.
1298 kes Modify .messages command to always print messages regardless
1300 kes If GUI mode is on, suppress automatic printing of
1302 kes Delete old bnet packet code.
1303 kes Ignore new BNET_START_SELECT and BNET_END_SELECT signals in
1304 wx-console. -kes not implemented because bconsole must be updated.
1305 kes Modify restore command in wx-console to set gui on and to use
1306 only .messages instead of messages. Hopefully this fixes bug
1308 kes Fix seg fault in exit of acquire when canceling a job --
1309 reported by Wolfgang Denk
1310 kes Pull in latest reservation system changes from 1.38
1311 kes Make .messages command always print messages regardless
1312 of the automessages flag.
1314 kes Fix seg fault if user labels a drive directory bug #513
1315 kes Remove quotes around Version as it breaks things.
1317 kes Merge in Aleksandar Milivojevic's mods to the spec file.
1318 kes Apply sparse code fix for raw drives and fifos. Bug 506
1319 kes Thorsten fixed Unicode cd problem with wx-console bug 505.
1321 kes Correct reservation system to do a last ditch try
1322 for any mounted volume, then anyone anywhere.
1323 kes Add quotes around table Version because of
1324 error in MySQL 4.1.15 -kes bug report submitted.
1325 kes Correct some minor problems with btape in the fill
1327 kes Updates to ssh-tunnel from Joshua Kugler.
1328 kes Added a report.pl program from Jonas Bjorklund.
1329 kes Simplify the O_NONBLOCK open() code for tape drives,
1330 and always open nonblocking.
1331 kes Do not wait for open() if EIO returned (shouldn't happen).
1332 kes Eliminate 3 argument to tape open().
1333 kes Correct the slot # edited in the 3995 Bad autochanger unload
1335 kes With -S on bscan (show progress) do not divide by zero.
1337 kes Make cancel pthread_cond_signal() pthread_cond_broadcast().
1338 kes When dcr is freed, also broadcast dev->wait_next_vol signal.
1339 kes Remove unused code in wait_for_device.
1340 kes Make wait_for_device() always return after 60 seconds of wait.
1344 kes Add stubs for non-crypto build.
1346 kes Use localhost if no network configured
1348 kes Eliminated duplicate MaxVolBytes in cat update -kes bug 509.
1349 kes Remove debug print.
1350 kes Add bail_out in error during state file reading.
1352 kes Merge changes made to 1.38.3 into HEAD
1353 kes Add stubs for pygtk-console code
1354 kes Create Makefile.in for pygtk-console code
1356 kes Merge updates into 1.38 branch
1357 kes Update specs to include mysql4 define.
1358 kes Fix when attributes are sent, must be after binit().
1359 kes Stop read_record() if status not ok in second loop.
1360 kes Return rec->FileIndex in dcr->VolLastIndex for normal
1361 and partial records in read_record(). This allows bscan
1362 to get FileIndex at EOT correct.
1363 kes Fix butil.c to correctly set dcr -kes fixes seg fault in bls.
1365 kes Fix Win32 built to work with new crypto code.
1366 kes Apply patch supplied by user (slightly modified) to fix
1367 correct detection of holes in block devices and FIFOs.
1369 kes Apply patch supplied by user (slightly modified)
1370 to fix SD hang with multiple pools and bad client
1371 IP. Fixes bug # 508.
1373 kes Add nagios plugin to the examples directory. Submitted by
1375 kes Remove warning message about multiple saves of hardlinked files
1376 from find_one.c as it can generate too many warning messages.
1377 kes Modify most restore error messages to be queued so that they
1378 appear at the end of the job rather than mixted with the restore
1379 listing where they could be 'lost'.
1381 kes Reset timeout values before select() per patch from
1382 Frank Sweetser for problems with non-blocking sockets.
1383 kes Unlink the state file if either reading or writing it gets
1384 errors. Hopefully this will fix Win32 exit problems.
1385 kes Add sanity check in append.c to ensure that dcr is not NULL.
1386 This can happen if multiple drive autochanger SCSI control
1387 channel and drive indicies do not correspond.
1389 kes Get next volume from Scratch pool before creating a volume.
1390 kes Set new Pool defaults in Vol when moved from Scratch Pool.
1391 kes Remove argument from create_bacula_database for SQLite as it
1393 kes Add back index code so that two drive autochangers can get
1395 kes Change a bunch of debug levels to aid debugging autochangers.
1396 kes Fix reservation so that mutexes are properly applied.
1397 kes Rework reservation algorithm so that two drives can be used
1400 kes Landon merged his data encription changes into the HEAD
1401 kes Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
1402 If this patch is applied, the number of days can be specified with
1403 'list nextvol days=xx'
1405 'status dir days=xx'
1406 My use case is to be able to preview the next scheduled job (and the
1407 next tape to be used) on fridays if there are no scheduled jobs during
1411 kes Fix font code in gnome2 console user patch. Fixes bug #501.
1412 kes Fix malformatted bnet error message that caused seg fault
1414 kes Applied user patch to improve README.vc8 in src/win32.
1416 kes Add Migrate, Copy, Archive Job types (some where there)
1417 kes Correct some more editing of JobId's (for 64 bit compatibility).
1418 kes Ensure that StorageId is stored in Media record when ever possible.
1419 kes Add Migration Job to Job.
1420 kes Add Migration Time, Migration High Bytes, Migration Low Bytes
1421 Next Pool to Pool resource.
1422 kes Add more code to mac.c (migration archive copy).
1423 kes Change Start Storage daemon job to require read and write storage
1425 kes Pass read storage data to SD as well as write storage data.
1426 kes Remove old code from winservice.cpp
1427 kes Break on error in scan.
1428 kes Fix typo in signal.c
1429 kes Separate read/write DCR in SD. Add jcr->read_dcr.
1430 kes Cleanup how find_device() works.
1431 kes Add read output to Status in SD.
1434 kes Add red-black btree routines
1436 kes Remove abs() in bfile.c so that it compiles on Solaris.
1439 kes Fix crash in tray-monitor when daemon disconnects. Bug #479.
1440 kes Fix bnet-server bug found on OpenBSD. Bug #486
1441 kes Fix cancel failure bug. Bug #481
1442 kes Fix failure when Pool name has spaces. Bug #487
1443 kes Fix SD crash in autochanger code. Mutex failure. Bug #488
1444 kes Fix a couple of free()s in src/filed/acl.c
1445 kes Fix memory overrun in bfile.c in building OS X resource
1446 fork filename. Bug #489
1447 kes Add Pool name to SD status output.
1449 kes Apply SunOS patch for ACLs submitted by David Duchscher.
1450 kes Make sure to set storage before trying to set drive.
1451 kes Add bacula_mail_summary.sh to examples directory. It makes
1452 a single email summary of any number of jobs. Submitted
1454 kes Make sure when we do a mount to unblock the device even
1455 if the drive could not be opened.
1457 kes Remove the USE_WIN32STREAMEXTRACTION #defines (always on)
1458 and correct a few minor problems to make it build on Linux.
1460 kes Remove delete of CVS from all Makefiles
1461 kes Fix seg fault when clicking on Add button in wx-console
1462 restore panel. Bug #470.
1463 kes Fix copyright date and URL typo -kes bug #468.
1464 kes Change autostart install for FreeBSD to look for rc.conf
1465 rather than rc.local as suggested fix for bug #466.
1466 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1467 grant on status. Bug #465
1468 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1469 update script. Bug #464
1470 kes Tweak #ifdefing a bit in new Win32 stream code.
1471 kes Fix #ifdeffing for FD_NO_SEND_TEST.
1472 kes Add documentation of performance #defines