1 Technical notes on version 1.39
5 kes Correct a test in block.c that prevented restore of a DVD from
6 looking at the last part in the spool directory.
7 kes Make some error messages clearer mostly by using the word DVD
8 in the message. Improve infor message in read_record for DVDs.
9 kes Remove DVD kludges in dircmd.c label/relabel.
10 kes Move the dvd relabel code from dircmd.c into
11 write_new_volume_label_to_dvd() adding a relabel argument.
12 kes Rewrite the truncate_dvd() code to be much simpler and
13 more logical. First blow away any spool part, then create a
14 new empty part and write to the DVD.
15 kes Rewrite the can_write_on_non_blank_dvd() code making it
16 only ensure that no valid data is on the DVD -- i.e. it
19 kes Minor Makefile fixes.
20 kes Put attach_dcr_to_dev in a subroutine.
21 kes Make attaching/detaching to/from a device use a flag and
22 only detach if actually attached.
23 kes Add dvd-simulator.in to scripts directory and add to configure.
24 kes Fix code in acquire.c that checks fd != 0 to use dev->is_open().
25 This could be a cause of a number of drive reservation problems.
26 Note, this code is now in attach_dcr_to_dev().
27 kes Suppress doing Volume updates if it is a system job. This should
28 prevent the DVD label blocking.
29 kes Clear the freespace ok flag in a couple of strategic places.
31 kes Put removing zero sized spool part file in subroutine and
32 call from release_device().
33 kes Add Richard's patch for relabel to dircmd.c, but save and restore
35 kes Rework a lot of subroutines in dev.c to take dcr as an
36 argument. This is done to eliminate the usage of attached_dcrs
38 kes Change truncated_dvd to blank_dvd, which seems more suitable.
39 kes Apply most of Richard Mortimer's truncate patch.
40 kes Create lseek() method for DEVICE that takes dcr as an
41 argument. This is to eliminate the use of attached_dcrs in
42 lseek(). The calls to lseek_dev() must still be changed.
44 kes Apply Richard Mortimer's patches for printing an error
45 message in btape when a DVD is used, and to initialize traceback.
46 kes Added error message to btape when trying to access a file.
47 kes Move prototype of update_slots() to protos.h.
49 kes Add JobErrors, JobFiles, SDJobFiles, SDJobErrors, SDJobStatus,
50 and FDJobStatus to the Director Python variables.
51 kes Make sure valid argument passed to str_to_utime() where Arno
53 kes Apply Richard Mortimer's patch for bcopy, bextract, and bscan.
54 I.e. part of two different patches.
56 kes Modify disk changer to simulate some of the error conditions
58 kes Make sure the close() call in the SD tools is just before the
60 kes Implement dir_get_volume_info() in bls using the patch from
61 Richard Mortimer but call find_num_dvd_parts().
62 kes Implement find_num_dvd_parts() that mounts and scans a DVD
64 kes Move the omode code in open_dvd() up so that the cannot
65 write on blank disk can check can be bypassed for read mode.
68 kes Disable normal data spooling for DVD writing which uses
69 a different spooling mechanism.
70 kes Apply patch from Richard Mortimer to ensure that the number
71 of DVD parts is correctly updated.
73 Version 1.39.22 beta released:
75 kes Fix logic error in handling error return from mtx-changer
77 kes Make status from SD aware of -1 (unknown) Slot status.
78 kes At Eric's suggestion make both the "slots" and "drive" commands
79 to the Storage daemon work even if the drive is busy.
80 kes Make two separate Win32 menu links for starting bconsole and
81 wx-console in winbacula.nsi
82 kes Apply DVD part_spooled patch from Richard Mortimer
84 kes Put installer/Readme.txt into Win32 EOL format for Notebook.
85 rbn Fixed problems migrating settings from previous releases in
86 Win32 installer. Add Readme.txt with an option to show it on
87 the installer Finish page.
89 kes Use get_catalog_resource() to open catalog database
90 to ensure that ACLs are respected and that user is
91 correctly prompted for database.
92 kes Integrate multiple console/director patch from
93 Carsten Paeth calle@calle.in-berlin.de
94 ebl Add character substitution in Job/JobDefs WriteBootStrap.
95 You can use now 'WriteBootStrap = "/path/%c_%n.bsr"'
96 kes Apply patch supplied in bug #656 to pass priority field
97 in the run dialog to the Director in gnome console
98 kes Restore DCR after VOL_NAME_ERROR in mount.c. Hopefully
99 this will fix bug #627 where Bacula eventually gets
100 confused about what Volume it wants.
101 kes Add a new close_part() class in the SD to save the device
102 state around open/close_part/open for DVD writing. This
103 should fix the num_dvd_parts getting zeroed as reported by
105 kes Apply patch from Richard Mortimer that correct edit code
106 for debug output of st_size.
107 ebl Add support of encrypted data stream to bscan.
108 display data_len instead of data content (may be binary)
110 kes Add dev->close() in dir_ask_sysop_to_mount_volume() in
111 bcopy. Fixes bug #669 reported by Eric.
112 kes Fix incorrect number of arguments in SQL statement in
113 sql_get.c as reported by Eric.
115 kes Update examples directory.
116 kes Remove unused variable in winservice.cpp
117 kes Make Win32 make command build installer.
119 kes Correct dvd code that breaks tape labeling.
120 kes Implement Enabled on update slots.
122 kes When doing a label, pass the VolBytes back to the Director,
123 which puts it in the catalog.
124 kes Print an error message if the user attempts to prune an
126 kes Need to start using %ld when sscanfing 32 bit values.
128 kes Correct the counting of VolCatBytes for DVDs.
129 kes Add code to mount.c to require that VolCatBytes corresponds to
130 what is actually found when doing an append.
131 kes Update freespace only after writing on the DVD.
132 kes Remove code that blows away the current part in the spool file.
134 kes Apply new dvd-handler patch from Richard Mortimer.
135 kes Tweak so that debug level 20 shows only DVD commands.
136 kes Correct spooled_part flag in dev.c close() so that it is cleared
137 when the spool file is deleted or does not exist.
138 kes Print part number in read_records when eof hit (restore).
140 -es Make find with no args in tree restore return error rather than
141 stopping the selection. Fixes bug #665
142 kes Rework DVD writing to ensure that the last part is written
143 on open_next_part when dealing with a spool file.
144 kes Correct the lseek_dev() routine to handle end point correctly
145 (bug introduced by me).
146 kes Allow part number to exceed num_dvd_parts in lseek_dev().
148 kes Apply dvd-handler patch from Richard Mortimer.
149 kes Apply dvd error check patch from Richard Mortimer.
150 kes Apply bpipe race patch from Richard Mortimer.
151 kes Rework how DVD labels are handled and set append only
152 when part > num_dvd_parts.
154 kes Rework many features of DVD writing and reading. Added many error
155 messages. Most importantly changed part to represent the current
156 part number base zero. This makes current DVD writing incompatible
157 with previous version.
159 kes Add host:port to connect failure messages to FD and SD from Dir.
160 kes Add WhereACL to console ACL list. If nothing is specified, only
161 the default is permitted for restore. Otherwise, *all* allows any
162 path, or you can specify permitted paths. This should allow control
163 over where users can restore files. This is untested.
164 kes Modified message to add a ? (as in loaded?) when querying the autochanger
165 for what Slot is loaded.
166 kes Fixed the use of Slot, so that is more correctly maintained, thus
167 eliminating unneeded duplicate calls to determine what Slot is loaded.
169 kes Install man pages with 'make install'
170 kes wx-console crashes because of differences between Bacula and wxWidgets
171 malloc()/free(). Tweak wx-console to use bmalloc()/bfree() for Bacula
173 kes correct improper indenting in wx-console/console_conf.c
174 kes update wx-console header copyrights
175 kes Fix bug #658 where wx-console mangles file/directory names containing
178 kes Add Media.Enabled flag to client backups for dotcmds.c
179 kes Enforce Media.Enabled=1 for a current restore to work.
180 kes Require restore case 3 to have sqlquery permission to work.
181 kes Remove obsolete del_MAC sql command.
182 kes Ensure that bscan creates Volumes with Enabled=1.
184 Version 1.39.20 beta released:
186 kes Correct missing Client table reference in SQL pointed out by
189 kes Fix Win32 build (new entrypoint, start baculafd).
191 kes Add -n option to bconsole to turn off conio.
192 kes Print JobIds to be migrated in Job Report.
193 kes Add additional user supplied notes to the messages part of
194 bacula-dir.conf concerning multiple email addresses.
195 kes Fix an incorrect comment pointed out by a user in dvd_handler.in
196 kes Add more recent Feature requests to Projects file.
198 kes Apply Maritn's fix to src/win32/Makefile.
199 kes Apply Martin's fix to configure.in for pthreads on FreeBSD 4.x
200 kes Implement pruning for Migration and migrated jobs.
201 kes Implement PoolOccupancy migration.
202 kes Implement PoolTime migration.
204 kes If doing a mount, look for a slot, and if specified pass it to
205 the SD so that it can load the autochanger.
206 kes Return DVD=1 flag if a label command is done to a DVD. This
207 permits setting VolParts to 1.
208 kes Apply DVD patch from Richard Mortimer <richm@oldelvet.org.uk>, but
209 rework ua_label code based on DVD media type to use DVD flag returned.
211 kes Eliminate some compile warnings in dird_conf.c
212 kes Format the bytes field in the terminated jobs part of the status
213 command for the three daemons with suffixes to reduce print size
214 of backup bytes. Suggested by a user.
215 kes When not descending into a directory, print the File= name that
216 triggered it -- makes why not descending a bit clearer.
217 kes Do not unload autochanger when doing a list command -- basic code
218 from Eric Bollengier.
220 kes Fix bug #462 incorrect error message printed when client script called
221 from File= was not found.
222 kes Fix bug #558 (waiting for feedback) where Bacula needs too much time to
223 do a rewind on Solaris when no tape is in the drive (Solaris does not
224 have the detailed errno found on Linux). Added Solaris specific code.
225 Note, this may apply to other OSes as well.
227 kes Defined BUILDING_CATS in src/cats/cats.h so that *nix builds.
228 dsb Updated rpm spec for 1.39 - updatedb 9 to 10, add new man pages,
229 fix bug 648 - update sqlite script patches, lock out gnome2console
230 builds for platforms with gtk+ < 2.4.
231 Updated build_rpm.sh - add remote source directory, add switch for
232 signing, refine file names.
233 Updated spec file again for Mandriva build as they have this curious
234 custom of silently converting all manpages to bzip2 format just before
235 the final packaging step.
237 rbn Fixed the Windows Makefiles so that they won't accidentally try and
238 pickup binaries for the Unix build. This allows both the Unix
239 build and the Windows build to be built in the same tree without
240 interfering with each other.
241 rbn Fixed error handling and cleaned up mtx-changer.cmd.
242 rbn Added the rest of the database scripts. These are installed but are
243 not yet edited for variable replacement.
244 rbn Broke out the cats functionality from bacula.dll and put into new
245 separate dlls for each database type. At installation time the
246 correct one is copied to bacula_cats.dll.
247 rbn Eliminate the need to install the mysql.dll on client only builds.
248 rbn Moved dird/sql_cmds.c into the cats directory so all the database
249 specific #ifdefs were in the cats directory.
250 rbn Added a new sql_cmds.h with all the declarations for the variables
251 exported from sql_cmds.c.
252 rbn Moved catalog_db[] from lib/message.c to a new routine db_get_type()
253 which is implemented in bdb.c, mysql.c, postgresql.c and sqlite.c in
255 kes Correct improperly formatted list command output reported by Dan.
257 kes Correct despool time calculation.
259 kes Remove previous changes to compat.cpp as they create problems.
260 kes Use old style MD5 for FileSets to avoid Full saves on every Job.
261 kes Attempt to fix problems with the msg_queue crashing on Solaris
262 when Bacula is terminating, but problems remain.
263 kes Add WIN32_VSS to HAVES in src/Makefile.inc.in to correct VSS
264 name editing problems with too many \\?\es.
265 kes Fix some Bacula source code style problems in compat.cpp.
266 kes Add debug code to compat.cpp and convert non-Bacula debug code
269 kes Change the name of the technical notes file from kes-1.39 to
270 technotes-1.39. Prefix my messages with 'kes '.
271 kes Allow dequeue_messages() to be called twice. Should fix bug
273 kes Add Job type to bscan Job information output.
275 kes Update copyright date in program files, and for the most part
277 kes Implement %q in bsnprintf.c apparently I forgot it.
279 kes Make disk-changer sed command compatible with FreeBSD.
280 kes Make a first cut at a ReleaseNotes and ChangeLog for a
282 kes Make make clean descend into the src/win32 directory.
283 kes Fix some #ifdefing so that Solaris and FreeBSD compile
284 sys/stat.h was turned off.
285 kes Use suffix editing for new transfer rate messages.
286 kes Attempt to come up with a workaround which seems to be an OS
287 bug where write() returns EBUSY. IMO this should not happen.
288 It triggered in truncatebug test. The workaround retries using
290 kes Eliminate a strerror() call in a class method that failed with
292 kes Use rm -rf rather than rmdir to delete the src/win32/release
293 directory during make clean.
295 kes Make bscan ignore ACL streams.
296 kes Update projects files with new Feature Requests.
297 kes Generate current English and French manuals and upload
299 kes Update the home page to include the new British/French flags to
300 switch between translations. Work done by Alexandre Baron.
301 kes Make disk-changer script print an error message if the changer
302 directory is not defined.
303 kes Create a generic DB routine for getting an int (32/64 bit) from
305 kes Add more migration code.
306 kes Add a few more files to .cvsignore here and there.
307 kes Minor fixes for SD write rate and despooling rate.
308 kes Turn off new test code in src/console.c
312 kes Incremented the version number to signify that all of Robert's code
313 for Win32 that was in the branch is now integrated into the HEAD,
314 and that Eric has submitted code that we hope will provide limited
315 backward compatibility with 1.38 file daemons (more testing to be
317 kes I rationalized a few of the names of the variables (mainly jcr names)
318 that are used during migration as keeping three different jcrs at the
319 same time clear in ones head is not easy.
323 eb Tweak new runscript feature to work with 1.38.x FDs.
324 eb Correct crypto.c to fix segfault when restoring an encrypted stream
325 on fd which don't use rsa keys.
326 eb Add yes/no English keywords on localized yes/no questions.
328 kes Several important commits from Robert Nelson for code cleanup and
330 kes Modify console.c so that when conio is enabled, it converts \n to
331 \n\r before outputting to the console. Hopefully this will fix
332 the problems with expect in Perl that Eric saw.
334 kes Change cats/sql.c to eliminate %-*s format, which I think is turned
336 kes Add Comment field to llist of a volume.
337 kes Allow true/false in some yes/no questions.
338 kes Implement update volume enable=(on|off|true|false|archived|0|1|2)
339 kes Remove a few /n's when scanning commands from another daemon. This
340 permits adding additional fields later.
341 kes Modify dbcheck to handle ctl-d and to delete Log table entries.
342 kes Update README.mingw
344 kes Tweak authentication to work with 1.38.x FDs.
345 kes Tweak catalog make scripts.
346 kes Fix catalog upgrade scripts so that they work.
347 kes Correct despooling debug code to eliminate race condition.
349 kes Add additional fields as specified by Arno to LocationLog.
350 kes Add comment field to the Media record.
351 kes Add Time field to the Log record.
352 kes Correct migration SQL (thanks to Bill Moran) so that it
353 runs with PostgreSQL also.
354 kes Add spooling/despooling info in status output of SD.
356 kes Spend a lot of time integrating mkcdrec with the rescue disk.
357 kes Add VOLMGMT message class for volume management messages (none yet).
358 kes Add CATALOG as a destination. It goes into the LOG table.
359 kes Implement the Log table in the DB.
360 kes Implement the Location Log table in the DB (for user use).
361 kes At Eric's request add a run_scripts() just after blast_data in
364 kes Add Enabled column to Location, correct some typos in DB schemas.
365 kes Correct bug I introduced into RunScripts enum.
366 kes Add log table to Catalog
367 kes Purge original job migrated if the migration terminates normally.
368 kes Cleanup purging of files/jobs so that it is done only in a
370 kes Add new VOLMGMT message class.
371 kes Add Catalog message destination (user conf code remains to be written).
373 kes Modify read_record and friends to properly deal with migration
375 kes Update debug code in read_record.
377 ======================= Warning ==========================
378 Separate read and write storage in Jobs in the Director. This
379 is a major rewrite of some of the low level code and hence has
380 a high probability of introducing bugs.
381 ==========================================================
383 kes Move the job init code up to *before* the job is put into
384 the job queue (resource allocation queue). This permits the
385 job to establish whether it will read or write or do both.
386 kes Add name() methods to all the resource classes.
387 kes Implement separate read and write storage resource
388 allocation/deallocation in jobq.c
390 ======================= Warning ==========================
391 Implemented new method of getting the default Storage from the Media
392 record rather than from the MediaType for restore. As a fall
393 back, if no Storage is defined, use the MediaType. This
394 eliminates most all prompts if there are multiple MediaTypes
395 used. This is an important and fundamental change.
396 ==========================================================
398 kes Add more detail (Storage, Device) to list of volumes printed
400 kes More code in migrate. In particular start multiple jobs if
402 kes Probably overkill, but ensure that the bsr is unique even within a
404 kes Rework bsys.c drop() so that it now should work as expected.
405 kes Update a bunch of old copyrights -kes particularly in .h files.
406 kes Remove src/lib/bshm.c/h
410 ======================= Warning ==========================
411 All hash codes in the database are now kept in world
412 compatible base64 format (no = filling). This means that
413 all FileSets will be updated and if you are running
414 verify jobs, you must do an InitCatalog.
415 Authentication uses the new algorithm, but should be
416 backward compatible with 1.38.x
417 ===========================================================
419 kes Modify the authentication routines so that the 1.39.15 Director
420 always runs with the compatible binary to base64 code (same as
421 the rest of the world). It will however detect if an SD or
422 FD is running the old code and if that is the case, will use
423 the old algorithm for authentication. However, all consoles must
424 use the compatible algorithm, and all data entered into the database
425 (all hash signatures, MD5, SHA1, ..., and all FileSet hashes) will
426 use the compatible algorithm.
427 kes Rename the cram_md5 routine names to be slightly more appropriate
428 to what they are doing (challenge and respond).
429 kes Robert committed his #ifdef and header cleanup.
431 kes Fix a compiler warning in files/backup.c
432 kes Cleanup NOT NULL vs DEFAULT 0 in database creation.
434 kes Robert committed his low impact changes.
435 kes I removed a size_t from the jcr.h definition.
436 kes Update the tape regression scripts (still to be tested).
437 kes Add gcc and gcc-c++ requires to srm as suggested by a user.
438 kes Require done or quit to exit from in memory tree restore.
440 kes Write install/uninstall of new manpages. There are now a
441 pile of man pages. Some of which need a lot of work.
443 ======================= Warning ==========================
444 The --mandir ./configure option now points to the top level
445 man directory. The man files will be installed under
446 mandir/man8 and mandir/man1 as appropriate.
447 ==========================================================
449 kes Add complete text of GPL to LICENSE.
450 kes Implement job report that indicates where Storage and Pool
451 came from -kes with overrides and Pool storage and NextPool,
452 it is all very complicated.
453 kes Create a few common subroutines for backup.c and migrate.c
454 kes Eliminate warning messages from tray-monitor.c
456 kes Apply fix for scheduler for missing unlock_jobs().
457 kes Clean out autoconf caches before rebuilding configure
458 kes Fix the FreeBSD pthreads lib define updated by Dan.
459 kes Add missing semicolon in src/console/console.c
460 kes Add Robert's enhanced version of build-win32-cross-tools
461 as well as his patch file.
462 kes Note, the new gcc options are likely to break building of
463 wx-console or the tray-monitor ...
465 kes Implement Robert's suggestion to suppress printing compile lines.
466 kes Detect GCC correctly (I hope)
467 kes If using GCC (actually g++) add the following compiler flags
468 -fno-strict-aliasing -fno-exceptions -fno-rtti
470 ===================== Warning =============================
471 Turn on new bsnprintf() code. This could cause print output
473 ===========================================================
475 kes Fix crypto when not using openssl. I previously overlooked this.
476 kes Eliminate crypto type punning problems by eliminating void * and
477 using uint8_t * instead.
478 kes Harden authentication failure in FD by single threading errors
479 and forcing a 6 second wait.
481 ===================== Warning =============================
482 Removed "Accept Any Volume" directive.
483 ===========================================================
485 kes Major cleanup and simplification of regress using shell functions
486 (more tests to be converted to new format)
487 kes Add detection of 64 bit Irix as indicated by user.
488 kes Increment catalog database id from 9 to 10.
489 kes Add a few of the new database fields to the various C++
491 kes Implement code to fill in the most important new fields (e.g.
493 kes Ensure that most of the new fields are in create/get/insert/update.
494 More work to be done.
496 kes Update some very old licenses in src/cats.
497 kes Modify the database format for handling Migration jobs:
498 Add PriorJobId, RealEndTime to Job table
500 Remove Stripe from JobMedia record (not used, wasting space)
501 Add ScratchPoolId, RecyclePoolId, Enabled to Media record
502 Add Cost to Location table.
503 kes Delete mac_record subroutines.
504 kes Add new table values to create/update/get routines as appropriate.
505 kes Update the update_tables and make_tables scripts.
506 kes Make a first cut in using a union where multiple pointers (actually
507 pointers to pointers) are stored.
508 kes Make some changes to base64.c suggested by Robert and others and add
509 a small amount of documentation.
510 kes Add some changes suggested by Peter for Solaris (bregex...)
511 kes Make runscript.h always built because it needs to be pulled into
512 more places. In particular its RES was left out of a union.
513 kes Renumber the enum{} list in runscript.h to avoid starting from zero.
514 This makes it slightly easier to detect uninitialized variables.
516 kes Remove xpg4 lib from FreeBSD build as it is no longer needed and
517 sometimes creates install problems.
518 kes Change a couple of %T in strftime to %H:%M:%S as seen in Robert
519 Nelson's code. More to do.
520 kes Convert a few store_bit to store_bool in filed_conf.c.
521 kes DVD tweak to block.c as supplied by Uwe Muessel.
523 kes Modify configure.in to check for typeof().
524 kes In findlib/attribs.c use typeof instead of templates if possible.
526 kes Implement partial error messages for src/filed/acl.c
527 kes Fix return code to fail when doing update barcodes and
528 Pool resource is not found. This previously caused Volumes
529 to be labeled as cleaning tapes.
530 kes Small updates to projects.
532 kes Add Eric Bollengier patch for new RunScript directive. It breaks
533 compatibility between dird and fd.
535 kes Prevent DVD code from rewriting label if the device cannot be
537 kes Used __GNUC__ to detect GNU g++ as suggested by John Goerzen to
538 fix Debian build bug.
539 kes Fix Dir/SD run race in migrate.c, verify.c, and restore.c
540 kes Integrate manpages contributed by Jose Luis.
541 kes Update projects file.
542 kes Add manpages Makefile.in to configure.in
543 kes Remove installation of bacula.8 in scripts directory.
545 kes Implement patch submitted by cesarb in bug #606 to implement O_NOATIME
547 O_NOATIME is a open() flag which makes it possible to read a file without
548 updating the inode atime (and also without the inode ctime update which
549 happens if you try to set the atime back to its previous value). It also
550 prevents a race condition when two programs are reading the same file, but
551 only one does not want to change the atime. It's most useful for backup
552 programs and file integrity checkers (and bacula can fit on both
555 Recent versions of the Linux kernel and glibc have support for it (the
556 glibc support being mostly copying the O_NOATIME definition to
557 bits/fcntl.h). If there's no support for it on the kernel, trying to use
558 it does nothing (since the kernel ignores unknown flags).
560 If the kernel has support for it, trying to use it either works, fails
561 silently (mostly in remote filesystems), or returns errno=EPERM (if you
562 are not either the owner of the file or root). A simple way to prevent the
563 failure is to open the file without the flag and set it later with
564 fcntl(F_SETFL), ignoring any EPERM errors.
565 kes Applied patch posted by Jaime Ventura to bug #570 to correct failure
566 of restarted jobs to complete (due to a destroyed pthreads conditional
567 variable used by the message thread).
568 kes Fixed bug #619 where Bacula would not restart jobs with MaxRestartTimes
570 kes Apply patch from John Goerzen bug #611 to fix bad manual links in the code.
571 kes Apply patch from Rudolf Cejka bug #614 to removed trailing
572 colons in query.sql file.
573 kes Apply patch from Rudolf Cejka bug #613 to correct prunning of files
574 not to create orphans.
575 kes Apply patch from Rudolf Cejka bug #617 to use mtime instead of ctime
576 in restore long listing.
577 kes Apply patch from Rudolf Cejka bug #609 to use MarkId in verify.c instead
578 of incorrect MarkedId.
579 kes Apply patch from adioso bug #616 to correct text in manual (replace
580 Director with File daemon).
581 kes Rework a few of the zlib changes so that they build properly.
584 kes Move DIR "run" command to SD before starting the message thread
585 as suggested by Cristopher Hull to avoid a race deadlock from
586 two threads using the bsock structure.
587 kes Modify LICENSE to correct some problems pointed out by Debian.
589 kes Correct EOF with no \n lex.c problem.
590 kes Tweak compat.h compat.cpp and merge with apcupsd
591 kes Add additional INFO messages if autochanger cannot be used.
594 kes Simplify Win32 Makefile
595 kes Correct count of buffers/bytes used by smartall.c
596 kes Updated compat.h after porting apcupsd to MinGW.
598 kes Work on getting wx-console building on MinGW. wxWidgets now builds
599 started adding Makefile ...
600 kes Moved MinGW library objects to src/win32/lib to reduce clutter.
602 kes Reloading a bad configuration file doesn't kill director any more.
603 Thanks to fix from Eric Bollengier.
605 kes Fix problem of accents with new Win32 code.
606 kes Integrate Howard's VSS patch. Tweak it a bit. VSS now
607 works in the MinGW build with the exception that there
608 is a problem with accented characters -kes i.e. there is
609 some mapping problem with wide characters.
610 kes The code no longer compiles with Microsoft VC++.
612 kes Start implementing Christopher's St.Bernard code.
613 kes Add Christopher's mods for opening files.
614 kes Strip \r \n from Win32 error messages (Christopher)
615 kes Add more info about Win32 system if unknown (Christopher)
616 kes Use bstrn(cpy, cat) routines to avoid overrun in compat.cpp
617 kes Fix a number of incorrect strings marked for translation, when
618 they should not be (e.g. commands).
619 kes Fix StartTime bug reported for ClientRunBeforeJob and RunBeforeJob
620 Patches supplied by user in bugs #608 and #599.
621 kes Use most recent of st_ctime and st_mtime in restore tree DIR
622 listing. This fixes some problems with Win32 printing incorrect
624 kes Correct the clock shift comm time calculation between the DIR
625 and the FD. It was added rather than subtracted.
626 kes Strip all backslashes in filenames to be restored on Win32
627 machines -kes the names should all be in Unix format, and if
628 there are any backslashes it is most likely due to an improper
629 FileSet definition, and the files will not otherwise be
631 kes Remove lib/regex.c (replaced by bregex.c).
632 kes Delete src/win32/License.txt
633 kes Modify installer to install LICENSE
635 kes Fix bug in build-win32-cross-tools script reported by Howard
636 kes Implement cross compiled bconsole
638 kes Fix barcode test, eliminate BOOL (doesn't exist on Linux).
639 kes Write first cut of README.mingw32
640 kes Add back ua_label barcode fix from Rufolf Cejka.
641 kes Integrate the majority of the Mingw cross-tools submission
642 made by Howard Thomson. Everything compiles, with zlib, openssl,
643 and VSS turned off. Linking needs a pthreads library ...
645 kes Add 'Dir Status' button to the gnome console.
646 kes More work on migration.
647 kes Restore non-compatible base64 coding to permit compatibility.
648 kes Display heap stats in Storage daemon without debug level.
650 kes Integrate most of the MinGW changes -kes more to do.
652 kes Implement using pg_config for finding PostgreSQL files.
653 Fixes bug #600. Patch supplied by user.
654 kes Remove -t option from mktemp in mtx_changer.in and use
655 working directory. Fixes bug #578.
656 kes Update job start time after the any run before job so that
657 files created by the script are only backed up once. Fixes
659 kes Strip trailing newline only from filenames entered in
660 the restore command when reading a file. This permits
661 the user to enter filenames with trailing spaces. Fixes
662 bug #549. The user supplied a patch that I modified slightly.
663 kes Use the most recent time (st_mtime, st_ctime) in the dir
664 command in restore. This gives the user a better idea of what
665 the newest file really is. This fixes bug #574. The fix
666 was suggested by the user.
667 kes Implement a compatible version of base64. This permits external
668 programs to duplicate Bacula's base64 algorithm using standard
669 routines. This fixes bugs #296, and 565. Patch submitted by
671 ================= Note ========================
672 Previous Signatures stored in the database are no longer
673 compatible with this. The main downside is for Verify jobs,
674 and doing an InitCatalog run will fix the problem. Also, the
675 authentication between the deamons is changed, so all daemons
676 must be simultaneously upgraded.
677 ==============================================
678 If you don't like this fix, set:
679 const bool compatible = true;
681 const bool compatible = false;
684 kes Ensure that DB signature is never NULL.
685 kes Ensure that DB table names are not translated.
686 kes Fix scheduler to handle time skew (eg daylight savings).
687 kes Fix scheduler to use lock_jobs() to avoid most problems
688 with reload. Window is now milliseconds.
690 kes Apply patch from Christopher Hull
691 kes Allow multiple connections to database with different
693 kes Invalidate the scheduler when doing a reload. Fixes seg
694 fault, but still 60 second window.
695 kes Additional info in Reschedule message.
696 kes Use set_jcr_job_status() everywhere to prevent loss of
698 kes Display peer IP in FD if error from connecting DIR.
699 kes Don't increment file count for DIRBEGIN.
700 kes Replace illegal characters in Win32 filename by _.
701 kes Add SE_CREATE_PERMANENT_NAME privilege in Win32.
702 kes Hash hard link filenames rather than linked list.
703 kes Fix for security failure in chdir on Win32.
704 kes Add CreateDirectoryA/W win32 API entry points.
705 kes Add /silent option to Win32 FD for Install/Remove service.
706 kes Always print Heap statistics in FD.
708 kes Remove the -f option from the chown in Makefile.in for more
710 kes Change setting the group in Makefile.in to use chgrp for
712 kes Implement a write_store and read_store to replace
713 dirstore in reserve.c
714 kes Implement a Bacula read/write lock for Python rather
715 than using the Python lock to avoid recursive problems.
716 kes Correct the uninstall directory names in filed/Makefile.in
717 as reported by a user.
719 kes Correct some problems with database creation (new tables).
720 kes Replace a bunch of old 0x%x by %p.
721 kes Get first cut of Migration with Job selection working.
723 kes Change store_bit() to store_bool() for the Spooling in
724 dird_conf.c -kes bug reported by Robert Nelson.
726 kes Correct Makefile bug found by Dan Langille.
728 kes Correct Makefile for Solaris /bin/sh
729 kes Correct mtx-changer.in for Solaris /bin/sh
730 kes Abort if a conf resource does not have a Name =
732 kes Change the name of the regex program to bregex.
733 kes Add the bwild program to the tools directory. It is similar
734 to the bregex program.
735 kes Implement create bregex.h and bregex.c in src/lib from the
736 Python regexp program.
737 kes Use the new bregex.c to implement Regex expressions on Win32.
739 kes More work on migration.
740 kes Implement wild program in tools directory for testing
741 wild-cards. Almost identical to the regex program.
742 kes Up port VSS single thread locking code.
743 kes Replace N_(..) by NT_(...) to inhibit translation of
745 kes Modify Makefile to change the permissions on Working Directory
746 to 770 if the directory is created.
747 kes Do not fail the Makefile if changing the permissions or
748 owner/group on WorkingDir fails.
749 kes Remove early selection of Scratch Volumes in the recycling
751 kes Correct the old recycling algorithm so that Scratch Volumes
752 are selected when looking for a Volume in the changer.
753 kes Correct a typo in the Verify SQL reported by Joe Park.
755 kes Remove automatic case folding on Windows FDs. You must
756 explictly use the 'Ignore Case = yes' option.
757 kes Remove the code added to 1.38.6 and 1.38.7 that pulls a
758 scratch volume in an Autochanger early in the 'recycling'
761 kes Make weof() and clrerror() methods of class DEVICE.
763 kes Tweak license to include Microsoft restrictions.
764 kes Move mysql.reconnect to after real_connect(). Thanks to
765 Frank Sweetser for the patch.
766 kes Disallow a backslash in a File = directive (Windows junk)
767 unless the string is quoted.
768 kes Apply Eric's patch to ua_label.c so that daemon protocol
770 kes Add NT_ definition for strings that should not be translated.
771 kes Apply NT_() to ua_label.c
772 kes Remove timed wait for VSS on Win2K3 as it is not yet
774 kes Correct bacula.in script to reference bacula-ctl-xx in the
775 sysconfig directory rather than the bin directory.
777 kes Fix a long standing bug in the bacula start/stop scripts.
778 kes Attempt to add the new bacula-ctl-* files to the rpm.
779 kes Switch to using typeof() for list traversing to avoid
780 as many FC5 g++ compiler warnings as possible.
782 kes Split the bacula start/start script into four files:
783 bacula -kes starts and stops calling other scripts
784 bacula-ctl-dir -kes starts/stops the director
785 bacula-ctl-fd -kes starts/stops the File daemon
786 bacula-ctl-sd -kes starts/stops the Storage daemon
788 kes Create datestyle fix for PostgreSQL. Fixes bug #574.
789 kes Correct editing of JobId from int to int64 in fd_cmds.c
790 kes Eliminate FileSet name race with bash_spaces() and multiple
791 threads by bashing in a local.
792 kes Fix error return from 'use storage' to print a correct error
793 message rather than nothing.
794 kes Correct false re-read last block error message when two jobs
795 are simultaneously writing at the end of a tape.
796 kes Simplify exit conditions in the reserve.c code to avoid
797 possible non-release of reservation_lock().
798 kes Suffle lock order in reserve to avoid deadlock between
799 reservation lock and device mutex.
801 kes Initialize jcr mutex before first use. Thanks to Thorsten for
802 tracking this down for me !!!! as it broke the Win32 build.
804 kes Integrate addition of line count limitation to bsmtp -l from
805 Sebastian Stark <stark at tuebingen.mpg.de>
807 kes Implement regex test program in tools directory.
808 kes Attempt to fix time problem with bsmtp with foreign langs.
809 kes Add strip_trailing_newline() submitted by user.
810 kes Implement regex matching in migrate.c
812 kes Fix bug #537 to allow arbitrary time to mount a volume for
813 restore, if polling is turned on.
814 kes If dir_user or dir-group is specified in ./configure apply it to
815 the working-dir. Fixes bug #533.
816 kes If rescheduling a job cancel the previous incarnation with the SD.
817 Fixes bugs #566 and 557.
818 kes Fix bug #567 do_message() definition type conflict.
821 kes Add more jcr methods and make mutex and use_count private.
822 kes Create lock/unlock methods for jcr.
823 kes Fix PostgreSQL bug doing sql_data_seeek() by explicitly reading
824 records to get to seek position.
825 kes Integrate patch from bug #561 to correct conio.c signal definitions.
826 kes Fix Rescheduling failed Jobs. Ensure that SD message thread
827 terminates correctly by doing pthread_kill(). Do not destroy
828 SD cond wait variable between executions of the job. Use local
829 mutex for cond variable to avoid blocking jcr chain. Fix poor
830 use of jcr use count in jobq.c for restarted jobs.
831 kes Fix obsolete usage of foreach_dlist() to use foreach_jcr() in
832 lib/jcr.c -kes prevents locking the jcr chaing.
833 kes Apply patch from bug #564, which corrects listing volumes with
834 multiple autochangers. Apply same fix to next volume list.
835 kes Fix bug #562 where restore bootstrap file is not unique.
836 kes More details in implementing David's migration syntax proposal.
837 kes Save and restore dcr when swapping drives so that if we have
838 a write dcr it is not lost.
839 kes Use new routine lock_reservations() to lock the reservations
840 system, and call it while looking for a volume in askdir.c.
841 This could possibly fix bug #543.
842 kes Stop SD command loop if job is canceled.
845 kes Remove old code from findlib/create_file.c
846 kes Rename mac.c migrate.c
847 kes Add user friendly display of VolBytes in job report.
848 kes Rename target... to previous... to make it a bit easier to
850 kes Add selection type and selection pattern to Migration (idea
851 given by David Boyes).
854 kes The po files should now be current.
855 kes Fix new sql_use_result() code to properly release the
856 buffers in all cases.
857 kes Use the keyword ujobid to mean the unique job id; job or jobname
858 to mean the Job name given on the Name directive, and jobid to
859 be the numeric (non-unique) job id.
860 kes Allow listing by any of the above.
861 kes Add the user friendly job report code for reporting job elapsed time
862 and rates with suffexes from John Kodis <kodis at comcast.net>.
863 kes Add Priority and JobLevel as Python settable items.
864 kes Use TEMPORARY table creation where the table is created by
866 kes Add new code submitted by Eric for waiting on specific jobid.
867 kes Add ACL checking for the dot commands.
868 kes Fix restore of writable FIFOs.
869 kes Fix a bug in bpipe where the string was freed too early.
871 kes Modify the Python class examples to inherit object -kes new way
872 of defining classes. Patch from Felix Schwarz.
873 kes Implement jobuid to replace old usage of job in keywords as
874 suggested by Eric Bollengier.
875 kes Apply patch for enhancing wait from Eric Bollengier. On can now:
876 wait (wait for all jobs to stop)
878 wait jobuid=unique id
880 kes Implement write variables for Python to set Priority (anytime), and
881 Job Level, only during JobInit event.
883 kes Fix the block listing bug pointed out by Arno.
884 kes Update the po files at Eric's request.
886 kes Fix Maximum Changer Wait, Maximum Open Wait, Maximum Rewind Wait to
887 accept time qualifiers.
888 kes Make catalog respect ACL.
889 kes Add recycle count to Media record.
891 Changes to 1.39.6-beta1 24Feb04
893 kes Add Rudolf Cejka's new rc-chio-changer.
894 kes Implement pulling Volume from Scratch Pool if the
895 Volume is in the autochanger.
896 kes Implement additional command arguments for update Volume.
900 kes Back port changes to 1.38.5
901 kes Fix recycle SQL for StorageId.
902 kes Fix misplaced quote in mtx-changer script.
904 kes Note. Your database must be updated, or you must create
905 a new database. I have not yet incremented the database level.
906 kes Add Location table.
907 kes Add LocationId, DeviceId, and MediaTypeId to Media record.
909 kes Implement create/get mac record in database for adding extended
910 Migration data to the job record.
911 kes Add new MAC table to update/make database scripts.
912 kes Return Storage name used when getting VolumeNames for a job.
913 kes Change bsr file keyword Storage to Device, which is more accurate.
914 kes Ensure that Mac records are pruned/purged.
915 kes Tweak SD tools to deal with changing media type.
916 kes Integrate more dev.c subroutines as methods (e.g. strerror, bsr, ...)
917 kes Pass pointer to dcr pointer to acquire_device_for_read() so
918 that the subroutine can switch devices, and hence dcrs.
919 kes Modify the multiple MediaType read code to re-use the same
920 dcr when switching devices. This makes the code much more
922 kes Integrate patch from Karl Hakimian that reads JobIds, FileIndexes
923 from a table for restore.
924 kes Add Storage name to VolParams, but it really should be Device.
926 kes Add disk-changer to scripts directory + configure/Makefile
927 kes Eliminate PoolId from jcr -kes it is in jcr->jr.PoolId
928 kes Implement store_bit scanner to replace store_yesno. Mostly done.
929 kes Implement new store_bool that stores in a bool.
930 kes Add true/false to yes/no conf directives.
931 kes Make first cut at changing appropriate store_yesno to store_bool.
932 kes Complete implementation of Pool storage devices.
933 kes Move starting clones to job.c
934 kes Move create_restore_bootstrap_file() to job.c
935 kes Make copy_storage() more general to be able to handle
937 kes Cleanup a lot of migration code for manual running, including
939 kes Move getting a scratch Volume into a subroutine.
940 kes Make all places a Volume that is added to a pool to
942 kes Fix bug in autochanger recycle code (improper edit 64 bit).
943 kes Fix segfault in restore command when no value specified.
944 kes Start adding code to handle multiple MediaTypes in restore.
945 kes Eliminate race condition in getting Volume name for
946 two drive autochanger.
947 kes More debug code in autochanger.
948 kes Add storage keyword to bootstrap file, add parsing.
949 kes Move slot in bsr file into Volume record as there will be
950 a different slot for each Volume.
953 kes Implement Pool storage overrides.
955 kes Implement first cut of Migration.
956 kes Implement mysql_use_result() from patch by Karl Hakimian.
957 This reduces significantly the memory consumption during
958 the restore tree building, and hence runs faster too.
959 kes Implement StorageId patch supplied by user (reggie) in bug
960 #536. This should permit Bacula to work correctly with two
962 kes Implement Job listing variations suggested by a user.
963 kes Move updating bootstrap code in backup.c to subroutine
964 update_bootstrap_file().
965 kes Add new job status elapsed time and bytes written user
966 friendly job report output patch sent by John Kodis
967 <kodis at comcast.ne>.
968 kes Implement a storage list in Pools.
969 kes Separate out setup_job() code from run_job().
970 kes Get migration working -kes lots of changes in mac.c in both
972 kes Apply patch from user (Eric Bollengier I think) that fixes a
973 DIR crash when no arguments are supplied to a dot command.
974 kes Fix typo (strcpy->strcmp) in ua_prune.c as reported by Martin.
975 kes Fix command arg name->volume in label command of gnome-console.
976 kes Fix SD acquire.c to release correct DCR by explicitly testing
977 on the dcr address rather than trying to devine if it is a read
978 or write dcr. This failed in error conditions when the device was
982 kes Apply user supplied patch for more readable rate output
984 kes Continue implementing migration.
985 kes Implement support for removable filesystems in SD.
986 kes Ensure that btraceback scripts can be read by anyone.
987 kes Replace dvd-freespace and dvd-writepart by dvd-handler.
988 kes Correct bug where canceling restore before the FD contacts
989 the SD causes the drive to be left in read mode.
990 kes Move ofline_or_rewind into DEVICE::close().
991 kes Eliminate close_device.
992 kes Convert several dev subroutines to methods (e.g. bsf,
994 kes Eliminate force_close_device().
995 kes Implement Device Type directive in Device resource that
996 can have values File, Tape, Fifo, DVD, or Prog.
997 kes Add has_cap() method to Device.
1000 kes Add patch from bug #527 to allow RedHat user to specify
1001 options/user/group for starting each daemon in
1002 /etc/sysconf/bacula.
1004 kes Add two new queries to query.sql provided by Arno. One
1005 list volumes known to the Storage device, and the other
1006 lists volumes possibly needing replacement (error, ...).
1008 kes Add periodic (every 24 hours) garbage collection of memory
1009 pool by releasing free buffers.
1011 kes Correct bug counting sized (for display only) in smartall.c
1012 kes Print FD mempool stats if debug > 0 rather than 5.
1014 kes Make db_lock() mutex error fail the job rather than abort
1015 Bacula. Canceling the job caused the mutex to fail.
1016 kes Correct bug in alist.c that re-allocated the list if the
1017 number of items goes to zero.
1018 kes Move the reservation system thread locking to the top level
1019 so that one job at a time tries all possible drives before
1021 kes Implement a reservation 'fail' message queue that is built
1022 and destroyed on each pass through the reservation system.
1023 These messages are displayed in a 'Jobs waiting to reserve
1024 a drive' list during a 'status storage='. Note, multiple
1025 messages will generally print for each JobId because they
1026 represent the different problems with either the same drive
1027 or different drives. If this output proves too confusing
1028 of voluminous, I will display it only when debug level 1
1029 or greater is enabled in the SD.
1031 kes Add enable/disable job=<job-name>. This command prevents
1032 the specified job from being scheduled. Even when disabled,
1033 the job can be manually started from the console.
1034 kes During 'update slots' clear all InChanger flags where the
1035 StorageId is zero (old Media records).
1037 Beta release 1.38.4:
1039 kes Fix autochanger code to strip leading spaces from returned
1040 slots number. Remove bc from chio-changer.
1041 kes Back port a bit of 1.39 crypto code to reduce diffs.
1042 kes Fix first call to autochanger that missed close()ing the
1043 drive. Put close() just before each run_program(). Fixes
1046 kes Add PoolId to Job record when updating it at job start time.
1048 kes Pull in more code from 1.39 so that there are fewer file
1049 differences (the new ua_dotcmds.c, base64.h, crypto.h
1050 hmac.c jcr.c (dird and lib) lib.h md5.h parse_conf.c
1051 util.c. Aside from ua_dotcmds.c these are mostly crypto
1053 kes Implement new method of walking the jcr chain. The
1054 incr/dec of the use_count is done within the walking
1055 routines. This should prevent a jcr from being freed
1056 from under the walk routines.
1061 kes Start implementing Verify list output.
1062 kes Move the suitable_drive flag to a better place to prevent
1063 premature termination of the reservation if all drives
1064 are busy -kes should fix Arno's diff/inc pool failures.
1066 kes Add mutex to single thread VSS code in Win32.
1068 kes Simplify code in askdir.c that waits for creating an appendable
1069 volume so that it can handle multiple returns from the wait
1071 kes Modify the wait code to permit multiple returns.
1072 kes Return a zero when "autochanger drives" is called and
1073 it is not an autochanger.
1074 kes Make rewind_dev() a method taking a DCR as an argument.
1075 This permits closing and reopening the drive if the
1076 rewind fails as happens if the drive was loaded while the
1077 file descriptor was open. This refreshes the file descriptor.
1078 kes Remove the ST_OPENED flag and always rely on fd < 0 for knowing
1079 if the device is open or not. This should eliminate
1081 kes Return error if reserve cannot find at least one suitable device.
1082 kes Make wait_for_sysop() return correct state information.
1083 kes Fix Win32 state file problem. write was not using compat
1084 code. This should fix bug #500.
1086 kes Modify gui on command to set only GUI mode and not batch.
1087 kes Modify .messages command to always print messages regardless
1089 kes If GUI mode is on, suppress automatic printing of
1091 kes Delete old bnet packet code.
1092 kes Ignore new BNET_START_SELECT and BNET_END_SELECT signals in
1093 wx-console. -kes not implemented because bconsole must be updated.
1094 kes Modify restore command in wx-console to set gui on and to use
1095 only .messages instead of messages. Hopefully this fixes bug
1097 kes Fix seg fault in exit of acquire when canceling a job --
1098 reported by Wolfgang Denk
1099 kes Pull in latest reservation system changes from 1.38
1100 kes Make .messages command always print messages regardless
1101 of the automessages flag.
1103 kes Fix seg fault if user labels a drive directory bug #513
1104 kes Remove quotes around Version as it breaks things.
1106 kes Merge in Aleksandar Milivojevic's mods to the spec file.
1107 kes Apply sparse code fix for raw drives and fifos. Bug 506
1108 kes Thorsten fixed Unicode cd problem with wx-console bug 505.
1110 kes Correct reservation system to do a last ditch try
1111 for any mounted volume, then anyone anywhere.
1112 kes Add quotes around table Version because of
1113 error in MySQL 4.1.15 -kes bug report submitted.
1114 kes Correct some minor problems with btape in the fill
1116 kes Updates to ssh-tunnel from Joshua Kugler.
1117 kes Added a report.pl program from Jonas Bjorklund.
1118 kes Simplify the O_NONBLOCK open() code for tape drives,
1119 and always open nonblocking.
1120 kes Do not wait for open() if EIO returned (shouldn't happen).
1121 kes Eliminate 3 argument to tape open().
1122 kes Correct the slot # edited in the 3995 Bad autochanger unload
1124 kes With -S on bscan (show progress) do not divide by zero.
1126 kes Make cancel pthread_cond_signal() pthread_cond_broadcast().
1127 kes When dcr is freed, also broadcast dev->wait_next_vol signal.
1128 kes Remove unused code in wait_for_device.
1129 kes Make wait_for_device() always return after 60 seconds of wait.
1133 kes Add stubs for non-crypto build.
1135 kes Use localhost if no network configured
1137 kes Eliminated duplicate MaxVolBytes in cat update -kes bug 509.
1138 kes Remove debug print.
1139 kes Add bail_out in error during state file reading.
1141 kes Merge changes made to 1.38.3 into HEAD
1142 kes Add stubs for pygtk-console code
1143 kes Create Makefile.in for pygtk-console code
1145 kes Merge updates into 1.38 branch
1146 kes Update specs to include mysql4 define.
1147 kes Fix when attributes are sent, must be after binit().
1148 kes Stop read_record() if status not ok in second loop.
1149 kes Return rec->FileIndex in dcr->VolLastIndex for normal
1150 and partial records in read_record(). This allows bscan
1151 to get FileIndex at EOT correct.
1152 kes Fix butil.c to correctly set dcr -kes fixes seg fault in bls.
1154 kes Fix Win32 built to work with new crypto code.
1155 kes Apply patch supplied by user (slightly modified) to fix
1156 correct detection of holes in block devices and FIFOs.
1158 kes Apply patch supplied by user (slightly modified)
1159 to fix SD hang with multiple pools and bad client
1160 IP. Fixes bug # 508.
1162 kes Add nagios plugin to the examples directory. Submitted by
1164 kes Remove warning message about multiple saves of hardlinked files
1165 from find_one.c as it can generate too many warning messages.
1166 kes Modify most restore error messages to be queued so that they
1167 appear at the end of the job rather than mixted with the restore
1168 listing where they could be "lost".
1170 kes Reset timeout values before select() per patch from
1171 Frank Sweetser for problems with non-blocking sockets.
1172 kes Unlink the state file if either reading or writing it gets
1173 errors. Hopefully this will fix Win32 exit problems.
1174 kes Add sanity check in append.c to ensure that dcr is not NULL.
1175 This can happen if multiple drive autochanger SCSI control
1176 channel and drive indicies do not correspond.
1178 kes Get next volume from Scratch pool before creating a volume.
1179 kes Set new Pool defaults in Vol when moved from Scratch Pool.
1180 kes Remove argument from create_bacula_database for SQLite as it
1182 kes Add back index code so that two drive autochangers can get
1184 kes Change a bunch of debug levels to aid debugging autochangers.
1185 kes Fix reservation so that mutexes are properly applied.
1186 kes Rework reservation algorithm so that two drives can be used
1189 kes Landon merged his data encription changes into the HEAD
1190 kes Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
1191 If this patch is applied, the number of days can be specified with
1192 "list nextvol days=xx"
1194 "status dir days=xx"
1195 My use case is to be able to preview the next scheduled job (and the
1196 next tape to be used) on fridays if there are no scheduled jobs during
1200 kes Fix font code in gnome2 console user patch. Fixes bug #501.
1201 kes Fix malformatted bnet error message that caused seg fault
1203 kes Applied user patch to improve README.vc8 in src/win32.
1205 kes Add Migrate, Copy, Archive Job types (some where there)
1206 kes Correct some more editing of JobId's (for 64 bit compatibility).
1207 kes Ensure that StorageId is stored in Media record when ever possible.
1208 kes Add Migration Job to Job.
1209 kes Add Migration Time, Migration High Bytes, Migration Low Bytes
1210 Next Pool to Pool resource.
1211 kes Add more code to mac.c (migration archive copy).
1212 kes Change Start Storage daemon job to require read and write storage
1214 kes Pass read storage data to SD as well as write storage data.
1215 kes Remove old code from winservice.cpp
1216 kes Break on error in scan.
1217 kes Fix typo in signal.c
1218 kes Separate read/write DCR in SD. Add jcr->read_dcr.
1219 kes Cleanup how find_device() works.
1220 kes Add read output to Status in SD.
1223 kes Add red-black btree routines
1225 kes Remove abs() in bfile.c so that it compiles on Solaris.
1228 kes Fix crash in tray-monitor when daemon disconnects. Bug #479.
1229 kes Fix bnet-server bug found on OpenBSD. Bug #486
1230 kes Fix cancel failure bug. Bug #481
1231 kes Fix failure when Pool name has spaces. Bug #487
1232 kes Fix SD crash in autochanger code. Mutex failure. Bug #488
1233 kes Fix a couple of free()s in src/filed/acl.c
1234 kes Fix memory overrun in bfile.c in building OS X resource
1235 fork filename. Bug #489
1236 kes Add Pool name to SD status output.
1238 kes Apply SunOS patch for ACLs submitted by David Duchscher.
1239 kes Make sure to set storage before trying to set drive.
1240 kes Add bacula_mail_summary.sh to examples directory. It makes
1241 a single email summary of any number of jobs. Submitted
1243 kes Make sure when we do a mount to unblock the device even
1244 if the drive could not be opened.
1246 kes Remove the USE_WIN32STREAMEXTRACTION #defines (always on)
1247 and correct a few minor problems to make it build on Linux.
1249 kes Remove delete of CVS from all Makefiles
1250 kes Fix seg fault when clicking on Add button in wx-console
1251 restore panel. Bug #470.
1252 kes Fix copyright date and URL typo -kes bug #468.
1253 kes Change autostart install for FreeBSD to look for rc.conf
1254 rather than rc.local as suggested fix for bug #466.
1255 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1256 grant on status. Bug #465
1257 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1258 update script. Bug #464
1259 kes Tweak #ifdefing a bit in new Win32 stream code.
1260 kes Fix #ifdeffing for FD_NO_SEND_TEST.
1261 kes Add documentation of performance #defines
projects / bacula / bacula / blob