1 Technical notes on version 1.39
5 kes Apply the three patches from Richard Mortimer.
6 bacula-reposition.patch, bacula-tape-reopen.patch, and
7 bacula-eod.patch. This corrects tape positioning on older devices,
8 and also a problem with btape.
9 kes Apply fix from bug report #696 where writing to a FIFO does not
10 work due to a dumb typo.
11 kes Unlock the tape door before the file descriptor is released. This
12 should fix lots of somewhat subtle failures when using an autochanger.
14 kes Correct mtx-changer bug that I introduced in a recent commit, and
15 pointed out by Robert Nelson -- thanks.
16 rbn Fix Windows' daemons so that messages print to stdout if not
18 rbn Add daemon name to trace file name (eg bacula-dir.trace).
19 rbn Fix environment variable expansion in directory names on Windows.
20 rbn Fix autochanger support in fill command.
21 rbn Update SQL scripts to match Unix versions.
22 rbn Fix daemon usage displays.
23 rbn Cleanup bacula-dir.conf template.
24 rbn Install openssl.cnf so that the openssl.exe installed in the
25 Bacula\bin directory can be used to generate keys and
26 certificates for TLS and encryption.
27 rbn Fix cleanup of spool files on Windows.
28 rbn Remove /silent option from daemons on Windows. The new default
29 is the same as the old /silent. To enable the message boxes that
30 previously were suppressed by /silent you must add /debug instead.
31 NOTE: As a result of this change, the first time you upgrade from
32 a previous version of 1.39.x you will receive the message
33 boxes when the remove of the old services succeeds. This
34 is the same behaviour as when migrating from a version prior
36 However, going forward, these message boxes will not appear on
37 upgrades or new installs.
38 rbn Add new /debug option. This option enables the message boxes that
39 previously were suppressed by the /silent option. In addition the
40 daemons running as services will open a console window if this
42 rbn Fix bug with service not being removed on migrated installs. This
43 should correct those cases where the file daemon install was failing
44 when upgrading from versions prior to 1.39.x.
47 kes Turn on heap reporting in Dir with zero debug level.
48 kes Send a message to the sys log when Bacula forces a SEG FAULT, and
49 send the same message to stdout.
51 kes Begin work on new GUI "console".
52 kes Make configure look in non-standard MySQL library directory
54 kes Make mtx-changer automatically configure the autochanger wait
55 procedure for Solaris, FreeBSD, and Linux. Previously, only Linux
57 kes Correct drop_sqlite_tables.in script to not delete the database.
58 kes When writing to a log file, close and reopen the file descriptor
59 if there is an error writing the file.
60 kes Modify the autochanger loaded?, load, and unload commands to print
61 the full text of any mtx output if there is an error. Helps to
62 ease diagnosis of autochanger problems.
63 kes Correct a few Win32 errno returns in the VSS code so that hopefully
64 a resonable Win32 error message will be printed.
65 kes Convert a few strcat()... to bstrncat() in the Win32 code.
67 rbn Added Windows version of bsmtp.
68 rbn Fixed path search for Windows so that Bacula\bin is automatically
69 searched for programs and scripts.
70 rbn Fixed bugs in mtx-changer.cmd and made template bacula-sd.conf
73 Version 1.39.24 released:
75 kes Apply dvd find volume patch from Richard Mortimer.
76 kes Eliminate the dvd specific mount routines using only the
78 kes Make update_free_space a method of DEVICE and rename
81 kes Require a messages command acl to be able to receive messages
83 kes Add console, system, and scan job types in util.c.
85 kes Print the Volume purged message only for real jobs to keep
86 from cluttering up the daemon messages.
87 kes Lock the tape drive door while Bacula is using the device.
88 kes Add back the 'No Jobs running' message to FD and SD status because
89 my regression script depends on it, and I'm too lazy to change the
91 kes Start using structure assignments (not too happy about it ...).
92 kes Fix a bug in the tools Makefile that broke on Solaris.
93 kes Unload any autochanger drive during a 'release' command.
95 kes Enhance error message when restoring without bootstrap file.
96 kes Check restored size only for regular files.
97 kes Store Python job level in job record in Dir.
98 kes Add back code to open tape device nonblocking, but if rewind fails
99 release file descriptor.
100 kes Modify acquire.c to first try autoloading the device. Also, ask operator
101 to mount tape if drive cannot be opened.
102 rbn Made Windows service tray status windows resizable.
103 rbn Fixed horizontal scrolling of text in status window.
104 rbn Preserve horizontal and vertical scroll position while
105 updating. This prevents the display being reset to the
106 top line every 5 seconds.
107 rbn Fix Windows cross-compile compatibilty problems with
108 *nix variants such as OS X without the zic command.
109 rbn Eliminate dependency on man2html.
111 kes Update src/win32/dll/bacula.def for change in BPIPE definition for
113 kes Fix a compiler warning in compat.cpp
114 kes Change strcpy to bstrncpy in compat.cpp
115 kes Remove some broken code in bdb_list.c
116 kes Fix, hopefully the last, ACL problem in the restore command.
117 kes Update the README.mingw32
118 kes Add new version of upgrade-win32-client.txt to examples directory.
119 Submitted by Michel Meyers.
120 kes Print an INFO message in the job report when a Volume is marked Purged.
121 rbn Fixed handling of external program and script execution
122 so that the format of the command line is more flexible.
123 Now executable path names containing spaces are translated
124 to the equivalent short name automatically. The result is
125 passed to cmd.exe with the quotes removed.
127 kes Apply the recycle patch from Richard Mortimer.
128 kes Convert a few if statements in dev.c to switch statements.
129 kes Start using print_errmsg instead of bstrerror().
130 kes Print a job message in SD when a job is marked to be canceled.
132 kes All code added back. Fixed block.c read/write to loop only 3
133 times. This apparently keeps the OS from crashing (at least
135 kes The kernel bug still persists. Backup something then immediately
136 do a bscan on the same tape, and the kernel will crash.
137 kes Simplifed tape open(). It no longer uses nonblocking mode, which
138 means that opening with no tape loaded will probably take at least
139 6 minutes before an error is reported.
140 kes Do not use MTSETDRVBUFFER if not running as root. Do a MTRESET
141 when doing set_os_device_parameters.
142 kes Report open error in mount.c
143 kes Remove all .exe files from the installer directory on make clean.
145 kes Start adding back removed code.
146 kes Back out a number of changes because backups to tape crash my
148 kes Remove the inetd code from the File daemon.
150 kes Add -c option to pg_dump so that it initializes tables when
152 kes Fix FirstWritten time on Volume to be obtained from SD so that
153 it is the actual time the volume was first written.
154 kes Minor Makefile changes.
155 kes Handle EBUSY during read(). Improve how EBUSY is handled in write().
156 ebl Add yes keyword to prune/purge command
158 kes Correct a test in block.c that prevented restore of a DVD from
159 looking at the last part in the spool directory.
160 kes Make some error messages clearer mostly by using the word DVD
161 in the message. Improve infor message in read_record for DVDs.
162 kes Remove DVD kludges in dircmd.c label/relabel.
163 kes Move the dvd relabel code from dircmd.c into
164 write_new_volume_label_to_dvd() adding a relabel argument.
165 kes Rewrite the truncate_dvd() code to be much simpler and
166 more logical. First blow away any spool part, then create a
167 new empty part and write to the DVD.
168 kes Rewrite the can_write_on_non_blank_dvd() code making it
169 only ensure that no valid data is on the DVD -- i.e. it
172 kes Minor Makefile fixes.
173 kes Put attach_dcr_to_dev in a subroutine.
174 kes Make attaching/detaching to/from a device use a flag and
175 only detach if actually attached.
176 kes Add dvd-simulator.in to scripts directory and add to configure.
177 kes Fix code in acquire.c that checks fd != 0 to use dev->is_open().
178 This could be a cause of a number of drive reservation problems.
179 Note, this code is now in attach_dcr_to_dev().
180 kes Suppress doing Volume updates if it is a system job. This should
181 prevent the DVD label blocking.
182 kes Clear the freespace ok flag in a couple of strategic places.
184 kes Put removing zero sized spool part file in subroutine and
185 call from release_device().
186 kes Add Richard's patch for relabel to dircmd.c, but save and restore
188 kes Rework a lot of subroutines in dev.c to take dcr as an
189 argument. This is done to eliminate the usage of attached_dcrs
191 kes Change truncated_dvd to blank_dvd, which seems more suitable.
192 kes Apply most of Richard Mortimer's truncate patch.
193 kes Create lseek() method for DEVICE that takes dcr as an
194 argument. This is to eliminate the use of attached_dcrs in
195 lseek(). The calls to lseek_dev() must still be changed.
197 kes Apply Richard Mortimer's patches for printing an error
198 message in btape when a DVD is used, and to initialize traceback.
199 kes Added error message to btape when trying to access a file.
200 kes Move prototype of update_slots() to protos.h.
202 kes Add JobErrors, JobFiles, SDJobFiles, SDJobErrors, SDJobStatus,
203 and FDJobStatus to the Director Python variables.
204 kes Make sure valid argument passed to str_to_utime() where Arno
206 kes Apply Richard Mortimer's patch for bcopy, bextract, and bscan.
207 I.e. part of two different patches.
209 kes Modify disk changer to simulate some of the error conditions
211 kes Make sure the close() call in the SD tools is just before the
213 kes Implement dir_get_volume_info() in bls using the patch from
214 Richard Mortimer but call find_num_dvd_parts().
215 kes Implement find_num_dvd_parts() that mounts and scans a DVD
216 and counts the parts.
217 kes Move the omode code in open_dvd() up so that the cannot
218 write on blank disk can check can be bypassed for read mode.
221 kes Disable normal data spooling for DVD writing which uses
222 a different spooling mechanism.
223 kes Apply patch from Richard Mortimer to ensure that the number
224 of DVD parts is correctly updated.
225 rbn Save installer details log in the Bacula directory as
227 rbn Add installer generation of client and storage templates
228 suitable for @inclusion on the director.
229 rbn Mark previously installed Win32 components read-only since
230 deselection doesn't do anything.
232 Version 1.39.22 beta released:
234 kes Fix logic error in handling error return from mtx-changer
236 kes Make status from SD aware of -1 (unknown) Slot status.
237 kes At Eric's suggestion make both the 'slots' and 'drive' commands
238 to the Storage daemon work even if the drive is busy.
239 kes Make two separate Win32 menu links for starting bconsole and
240 wx-console in winbacula.nsi
241 kes Apply DVD part_spooled patch from Richard Mortimer
242 richm@oldelvet.org.uk
243 kes Put installer/Readme.txt into Win32 EOL format for Notebook.
244 rbn Fixed problems migrating settings from previous releases in
245 Win32 installer. Add Readme.txt with an option to show it on
246 the installer Finish page.
248 kes Use get_catalog_resource() to open catalog database
249 to ensure that ACLs are respected and that user is
250 correctly prompted for database.
251 kes Integrate multiple console/director patch from
252 Carsten Paeth calle@calle.in-berlin.de
253 ebl Add character substitution in Job/JobDefs WriteBootStrap.
254 You can use now 'WriteBootStrap = '/path/%c_%n.bsr''
255 kes Apply patch supplied in bug #656 to pass priority field
256 in the run dialog to the Director in gnome console
257 kes Restore DCR after VOL_NAME_ERROR in mount.c. Hopefully
258 this will fix bug #627 where Bacula eventually gets
259 confused about what Volume it wants.
260 kes Add a new close_part() class in the SD to save the device
261 state around open/close_part/open for DVD writing. This
262 should fix the num_dvd_parts getting zeroed as reported by
264 kes Apply patch from Richard Mortimer that correct edit code
265 for debug output of st_size.
266 ebl Add support of encrypted data stream to bscan.
267 display data_len instead of data content (may be binary)
269 kes Add dev->close() in dir_ask_sysop_to_mount_volume() in
270 bcopy. Fixes bug #669 reported by Eric.
271 kes Fix incorrect number of arguments in SQL statement in
272 sql_get.c as reported by Eric.
274 kes Update examples directory.
275 kes Remove unused variable in winservice.cpp
276 kes Make Win32 make command build installer.
277 rbn Add new Install Type page, used to select between Automatic
278 and Custom installs. Automatic installs only prompt for
279 configuration items that can't be reasonably defaulted.
280 rbn Added Bacula logo to page headers.
281 rbn Added Upgrade support
282 - Configuration and component selection are migrated from
284 - Configuration of upgraded components is preserved and
286 - Configuration of new components is handled according to
287 the Automatic / Custom selection.
288 - Component selection is defaulted to previously selected
290 rbn Installation of Server components is disabled on
291 Windows 95, 98 and ME.
292 rbn Added URLs for support, info and upgrades to Bacula entry
293 in Add/Remove Programs.
294 rbn Added Version info to Bacula entry in Add/Remove Programs.
296 kes Correct dvd code that breaks tape labeling.
297 kes Implement Enabled on update slots.
299 kes When doing a label, pass the VolBytes back to the Director,
300 which puts it in the catalog.
301 kes Print an error message if the user attempts to prune an
303 kes Need to start using %ld when sscanfing 32 bit values.
305 kes Correct the counting of VolCatBytes for DVDs.
306 kes Add code to mount.c to require that VolCatBytes corresponds to
307 what is actually found when doing an append.
308 kes Update freespace only after writing on the DVD.
309 kes Remove code that blows away the current part in the spool file.
311 kes Apply new dvd-handler patch from Richard Mortimer.
312 kes Tweak so that debug level 20 shows only DVD commands.
313 kes Correct spooled_part flag in dev.c close() so that it is cleared
314 when the spool file is deleted or does not exist.
315 kes Print part number in read_records when eof hit (restore).
316 rbn Installer default changed to start services on new install.
318 kes Make find with no args in tree restore return error rather than
319 stopping the selection. Fixes bug #665
320 kes Rework DVD writing to ensure that the last part is written
321 on open_next_part when dealing with a spool file.
322 kes Correct the lseek_dev() routine to handle end point correctly
323 (bug introduced by me).
324 kes Allow part number to exceed num_dvd_parts in lseek_dev().
325 rbn Change make_session_key on Windows to use WIN32 APIs to produce
327 rbn Add new tool scsilist.exe which displays the changer, tape and
328 CD/DVD (1394, SCSI, SATA, ATAPI) devices and the information required
329 to add them to bacula-sd.conf.
331 kes Apply dvd-handler patch from Richard Mortimer.
332 kes Apply dvd error check patch from Richard Mortimer.
333 kes Apply bpipe race patch from Richard Mortimer.
334 kes Rework how DVD labels are handled and set append only
335 when part > num_dvd_parts.
337 kes Rework many features of DVD writing and reading. Added many error
338 messages. Most importantly changed part to represent the current
339 part number base zero. This makes current DVD writing incompatible
340 with previous version.
342 kes Add host:port to connect failure messages to FD and SD from Dir.
343 kes Add WhereACL to console ACL list. If nothing is specified, only
344 the default is permitted for restore. Otherwise, *all* allows any
345 path, or you can specify permitted paths. This should allow control
346 over where users can restore files. This is untested.
347 kes Modified message to add a ? (as in loaded?) when querying the autochanger
348 for what Slot is loaded.
349 kes Fixed the use of Slot, so that is more correctly maintained, thus
350 eliminating unneeded duplicate calls to determine what Slot is loaded.
352 kes Install man pages with 'make install'
353 kes wx-console crashes because of differences between Bacula and wxWidgets
354 malloc()/free(). Tweak wx-console to use bmalloc()/bfree() for Bacula
356 kes correct improper indenting in wx-console/console_conf.c
357 kes update wx-console header copyrights
358 kes Fix bug #658 where wx-console mangles file/directory names containing
361 kes Add Media.Enabled flag to client backups for dotcmds.c
362 kes Enforce Media.Enabled=1 for a current restore to work.
363 kes Require restore case 3 to have sqlquery permission to work.
364 kes Remove obsolete del_MAC sql command.
365 kes Ensure that bscan creates Volumes with Enabled=1.
367 Version 1.39.20 beta released:
369 kes Correct missing Client table reference in SQL pointed out by
372 kes Fix Win32 build (new entrypoint, start baculafd).
374 kes Add -n option to bconsole to turn off conio.
375 kes Print JobIds to be migrated in Job Report.
376 kes Add additional user supplied notes to the messages part of
377 bacula-dir.conf concerning multiple email addresses.
378 kes Fix an incorrect comment pointed out by a user in dvd_handler.in
379 kes Add more recent Feature requests to Projects file.
381 kes Apply Maritn's fix to src/win32/Makefile.
382 kes Apply Martin's fix to configure.in for pthreads on FreeBSD 4.x
383 kes Implement pruning for Migration and migrated jobs.
384 kes Implement PoolOccupancy migration.
385 kes Implement PoolTime migration.
387 kes If doing a mount, look for a slot, and if specified pass it to
388 the SD so that it can load the autochanger.
389 kes Return DVD=1 flag if a label command is done to a DVD. This
390 permits setting VolParts to 1.
391 kes Apply DVD patch from Richard Mortimer <richm@oldelvet.org.uk>, but
392 rework ua_label code based on DVD media type to use DVD flag returned.
394 kes Eliminate some compile warnings in dird_conf.c
395 kes Format the bytes field in the terminated jobs part of the status
396 command for the three daemons with suffixes to reduce print size
397 of backup bytes. Suggested by a user.
398 kes When not descending into a directory, print the File= name that
399 triggered it -- makes why not descending a bit clearer.
400 kes Do not unload autochanger when doing a list command -- basic code
401 from Eric Bollengier.
403 rbn Reworked the MinGW32 build-dependencies script, it has been renamed
404 to build-depkgs-mingw32. It now handles two options -h to display
405 help and -C to reextract the source and apply the patches. The -C
406 option is useful for updating the source after new patches are
408 rbn Moved the 3rd party package URLs to a separate file External-mingw32.
409 This allows updating to new versions without having to modify the
410 script and makes it easier to figure out which packages and which
412 rbn Added a new script build-depkgs-msvc.cmd which does the same thing
413 as build-depkgs-mingw32 except they are built using Microsoft Visual C
414 and placed in the depkgs-msvc directory. There is also an
415 External-msvc file to describe the packages.
417 rbn Fix Windows cross-compile compatibilty problems with FreeBSD.
419 kes Fix bug #462 incorrect error message printed when client script called
420 from File= was not found.
421 kes Fix bug #558 (waiting for feedback) where Bacula needs too much time to
422 do a rewind on Solaris when no tape is in the drive (Solaris does not
423 have the detailed errno found on Linux). Added Solaris specific code.
424 Note, this may apply to other OSes as well.
426 kes Defined BUILDING_CATS in src/cats/cats.h so that *nix builds.
427 dsb Updated rpm spec for 1.39 - updatedb 9 to 10, add new man pages,
428 fix bug 648 - update sqlite script patches, lock out gnome2console
429 builds for platforms with gtk+ < 2.4.
430 Updated build_rpm.sh - add remote source directory, add switch for
431 signing, refine file names.
432 Updated spec file again for Mandriva build as they have this curious
433 custom of silently converting all manpages to bzip2 format just before
434 the final packaging step.
436 rbn Fixed the Windows Makefiles so that they won't accidentally try and
437 pickup binaries for the Unix build. This allows both the Unix
438 build and the Windows build to be built in the same tree without
439 interfering with each other.
440 rbn Fixed error handling and cleaned up mtx-changer.cmd.
441 rbn Added the rest of the database scripts. These are installed but are
442 not yet edited for variable replacement.
443 rbn Broke out the cats functionality from bacula.dll and put into new
444 separate dlls for each database type. At installation time the
445 correct one is copied to bacula_cats.dll.
446 rbn Eliminate the need to install the mysql.dll on client only builds.
447 rbn Moved dird/sql_cmds.c into the cats directory so all the database
448 specific #ifdefs were in the cats directory.
449 rbn Added a new sql_cmds.h with all the declarations for the variables
450 exported from sql_cmds.c.
451 rbn Moved catalog_db[] from lib/message.c to a new routine db_get_type()
452 which is implemented in bdb.c, mysql.c, postgresql.c and sqlite.c in
454 kes Correct improperly formatted list command output reported by Dan.
456 kes Correct despool time calculation.
458 kes Remove previous changes to compat.cpp as they create problems.
459 kes Use old style MD5 for FileSets to avoid Full saves on every Job.
460 kes Attempt to fix problems with the msg_queue crashing on Solaris
461 when Bacula is terminating, but problems remain.
462 kes Add WIN32_VSS to HAVES in src/Makefile.inc.in to correct VSS
463 name editing problems with too many \\?\es.
464 kes Fix some Bacula source code style problems in compat.cpp.
465 kes Add debug code to compat.cpp and convert non-Bacula debug code
468 kes Change the name of the technical notes file from kes-1.39 to
469 technotes-1.39. Prefix my messages with 'kes '.
470 kes Allow dequeue_messages() to be called twice. Should fix bug
472 kes Add Job type to bscan Job information output.
474 kes Update copyright date in program files, and for the most part
476 kes Implement %q in bsnprintf.c apparently I forgot it.
478 kes Make disk-changer sed command compatible with FreeBSD.
479 kes Make a first cut at a ReleaseNotes and ChangeLog for a
481 kes Make make clean descend into the src/win32 directory.
482 kes Fix some #ifdefing so that Solaris and FreeBSD compile
483 sys/stat.h was turned off.
484 kes Use suffix editing for new transfer rate messages.
485 kes Attempt to come up with a workaround which seems to be an OS
486 bug where write() returns EBUSY. IMO this should not happen.
487 It triggered in truncatebug test. The workaround retries using
489 kes Eliminate a strerror() call in a class method that failed with
491 kes Use rm -rf rather than rmdir to delete the src/win32/release
492 directory during make clean.
494 kes Make bscan ignore ACL streams.
495 kes Update projects files with new Feature Requests.
496 kes Generate current English and French manuals and upload
498 kes Update the home page to include the new British/French flags to
499 switch between translations. Work done by Alexandre Baron.
500 kes Make disk-changer script print an error message if the changer
501 directory is not defined.
502 kes Create a generic DB routine for getting an int (32/64 bit) from
504 kes Add more migration code.
505 kes Add a few more files to .cvsignore here and there.
506 kes Minor fixes for SD write rate and despooling rate.
507 kes Turn off new test code in src/console.c
511 kes Incremented the version number to signify that all of Robert's code
512 for Win32 that was in the branch is now integrated into the HEAD,
513 and that Eric has submitted code that we hope will provide limited
514 backward compatibility with 1.38 file daemons (more testing to be
516 kes I rationalized a few of the names of the variables (mainly jcr names)
517 that are used during migration as keeping three different jcrs at the
518 same time clear in ones head is not easy.
522 eb Tweak new runscript feature to work with 1.38.x FDs.
523 eb Correct crypto.c to fix segfault when restoring an encrypted stream
524 on fd which don't use rsa keys.
525 eb Add yes/no English keywords on localized yes/no questions.
527 kes Several important commits from Robert Nelson for code cleanup and
529 kes Modify console.c so that when conio is enabled, it converts \n to
530 \n\r before outputting to the console. Hopefully this will fix
531 the problems with expect in Perl that Eric saw.
533 kes Change cats/sql.c to eliminate %-*s format, which I think is turned
535 kes Add Comment field to llist of a volume.
536 kes Allow true/false in some yes/no questions.
537 kes Implement update volume enable=(on|off|true|false|archived|0|1|2)
538 kes Remove a few /n's when scanning commands from another daemon. This
539 permits adding additional fields later.
540 kes Modify dbcheck to handle ctl-d and to delete Log table entries.
541 kes Update README.mingw
543 kes Tweak authentication to work with 1.38.x FDs.
544 kes Tweak catalog make scripts.
545 kes Fix catalog upgrade scripts so that they work.
546 kes Correct despooling debug code to eliminate race condition.
548 kes Add additional fields as specified by Arno to LocationLog.
549 kes Add comment field to the Media record.
550 kes Add Time field to the Log record.
551 kes Correct migration SQL (thanks to Bill Moran) so that it
552 runs with PostgreSQL also.
553 kes Add spooling/despooling info in status output of SD.
555 kes Spend a lot of time integrating mkcdrec with the rescue disk.
556 kes Add VOLMGMT message class for volume management messages (none yet).
557 kes Add CATALOG as a destination. It goes into the LOG table.
558 kes Implement the Log table in the DB.
559 kes Implement the Location Log table in the DB (for user use).
560 kes At Eric's request add a run_scripts() just after blast_data in
563 kes Add Enabled column to Location, correct some typos in DB schemas.
564 kes Correct bug I introduced into RunScripts enum.
565 kes Add log table to Catalog
566 kes Purge original job migrated if the migration terminates normally.
567 kes Cleanup purging of files/jobs so that it is done only in a
569 kes Add new VOLMGMT message class.
570 kes Add Catalog message destination (user conf code remains to be written).
572 kes Modify read_record and friends to properly deal with migration
574 kes Update debug code in read_record.
576 ======================= Warning ==========================
577 Separate read and write storage in Jobs in the Director. This
578 is a major rewrite of some of the low level code and hence has
579 a high probability of introducing bugs.
580 ==========================================================
582 kes Move the job init code up to *before* the job is put into
583 the job queue (resource allocation queue). This permits the
584 job to establish whether it will read or write or do both.
585 kes Add name() methods to all the resource classes.
586 kes Implement separate read and write storage resource
587 allocation/deallocation in jobq.c
589 ======================= Warning ==========================
590 Implemented new method of getting the default Storage from the Media
591 record rather than from the MediaType for restore. As a fall
592 back, if no Storage is defined, use the MediaType. This
593 eliminates most all prompts if there are multiple MediaTypes
594 used. This is an important and fundamental change.
595 ==========================================================
597 kes Add more detail (Storage, Device) to list of volumes printed
599 kes More code in migrate. In particular start multiple jobs if
601 kes Probably overkill, but ensure that the bsr is unique even within a
603 kes Rework bsys.c drop() so that it now should work as expected.
604 kes Update a bunch of old copyrights -kes particularly in .h files.
605 kes Remove src/lib/bshm.c/h
609 ======================= Warning ==========================
610 All hash codes in the database are now kept in world
611 compatible base64 format (no = filling). This means that
612 all FileSets will be updated and if you are running
613 verify jobs, you must do an InitCatalog.
614 Authentication uses the new algorithm, but should be
615 backward compatible with 1.38.x
616 ===========================================================
618 kes Modify the authentication routines so that the 1.39.15 Director
619 always runs with the compatible binary to base64 code (same as
620 the rest of the world). It will however detect if an SD or
621 FD is running the old code and if that is the case, will use
622 the old algorithm for authentication. However, all consoles must
623 use the compatible algorithm, and all data entered into the database
624 (all hash signatures, MD5, SHA1, ..., and all FileSet hashes) will
625 use the compatible algorithm.
626 kes Rename the cram_md5 routine names to be slightly more appropriate
627 to what they are doing (challenge and respond).
628 kes Robert committed his #ifdef and header cleanup.
630 kes Fix a compiler warning in files/backup.c
631 kes Cleanup NOT NULL vs DEFAULT 0 in database creation.
633 kes Robert committed his low impact changes.
634 kes I removed a size_t from the jcr.h definition.
635 kes Update the tape regression scripts (still to be tested).
636 kes Add gcc and gcc-c++ requires to srm as suggested by a user.
637 kes Require done or quit to exit from in memory tree restore.
639 kes Write install/uninstall of new manpages. There are now a
640 pile of man pages. Some of which need a lot of work.
642 ======================= Warning ==========================
643 The --mandir ./configure option now points to the top level
644 man directory. The man files will be installed under
645 mandir/man8 and mandir/man1 as appropriate.
646 ==========================================================
648 kes Add complete text of GPL to LICENSE.
649 kes Implement job report that indicates where Storage and Pool
650 came from -kes with overrides and Pool storage and NextPool,
651 it is all very complicated.
652 kes Create a few common subroutines for backup.c and migrate.c
653 kes Eliminate warning messages from tray-monitor.c
655 kes Apply fix for scheduler for missing unlock_jobs().
656 kes Clean out autoconf caches before rebuilding configure
657 kes Fix the FreeBSD pthreads lib define updated by Dan.
658 kes Add missing semicolon in src/console/console.c
659 kes Add Robert's enhanced version of build-win32-cross-tools
660 as well as his patch file.
661 kes Note, the new gcc options are likely to break building of
662 wx-console or the tray-monitor ...
664 kes Implement Robert's suggestion to suppress printing compile lines.
665 kes Detect GCC correctly (I hope)
666 kes If using GCC (actually g++) add the following compiler flags
667 -fno-strict-aliasing -fno-exceptions -fno-rtti
669 ===================== Warning =============================
670 Turn on new bsnprintf() code. This could cause print output
672 ===========================================================
674 kes Fix crypto when not using openssl. I previously overlooked this.
675 kes Eliminate crypto type punning problems by eliminating void * and
676 using uint8_t * instead.
677 kes Harden authentication failure in FD by single threading errors
678 and forcing a 6 second wait.
680 ===================== Warning =============================
681 Removed 'Accept Any Volume' directive.
682 ===========================================================
684 kes Major cleanup and simplification of regress using shell functions
685 (more tests to be converted to new format)
686 kes Add detection of 64 bit Irix as indicated by user.
687 kes Increment catalog database id from 9 to 10.
688 kes Add a few of the new database fields to the various C++
690 kes Implement code to fill in the most important new fields (e.g.
692 kes Ensure that most of the new fields are in create/get/insert/update.
693 More work to be done.
695 kes Update some very old licenses in src/cats.
696 kes Modify the database format for handling Migration jobs:
697 Add PriorJobId, RealEndTime to Job table
699 Remove Stripe from JobMedia record (not used, wasting space)
700 Add ScratchPoolId, RecyclePoolId, Enabled to Media record
701 Add Cost to Location table.
702 kes Delete mac_record subroutines.
703 kes Add new table values to create/update/get routines as appropriate.
704 kes Update the update_tables and make_tables scripts.
705 kes Make a first cut in using a union where multiple pointers (actually
706 pointers to pointers) are stored.
707 kes Make some changes to base64.c suggested by Robert and others and add
708 a small amount of documentation.
709 kes Add some changes suggested by Peter for Solaris (bregex...)
710 kes Make runscript.h always built because it needs to be pulled into
711 more places. In particular its RES was left out of a union.
712 kes Renumber the enum{} list in runscript.h to avoid starting from zero.
713 This makes it slightly easier to detect uninitialized variables.
715 kes Remove xpg4 lib from FreeBSD build as it is no longer needed and
716 sometimes creates install problems.
717 kes Change a couple of %T in strftime to %H:%M:%S as seen in Robert
718 Nelson's code. More to do.
719 kes Convert a few store_bit to store_bool in filed_conf.c.
720 kes DVD tweak to block.c as supplied by Uwe Muessel.
722 kes Modify configure.in to check for typeof().
723 kes In findlib/attribs.c use typeof instead of templates if possible.
725 kes Implement partial error messages for src/filed/acl.c
726 kes Fix return code to fail when doing update barcodes and
727 Pool resource is not found. This previously caused Volumes
728 to be labeled as cleaning tapes.
729 kes Small updates to projects.
731 kes Add Eric Bollengier patch for new RunScript directive. It breaks
732 compatibility between dird and fd.
734 kes Prevent DVD code from rewriting label if the device cannot be
736 kes Used __GNUC__ to detect GNU g++ as suggested by John Goerzen to
737 fix Debian build bug.
738 kes Fix Dir/SD run race in migrate.c, verify.c, and restore.c
739 kes Integrate manpages contributed by Jose Luis.
740 kes Update projects file.
741 kes Add manpages Makefile.in to configure.in
742 kes Remove installation of bacula.8 in scripts directory.
744 kes Implement patch submitted by cesarb in bug #606 to implement O_NOATIME
746 O_NOATIME is a open() flag which makes it possible to read a file without
747 updating the inode atime (and also without the inode ctime update which
748 happens if you try to set the atime back to its previous value). It also
749 prevents a race condition when two programs are reading the same file, but
750 only one does not want to change the atime. It's most useful for backup
751 programs and file integrity checkers (and bacula can fit on both
754 Recent versions of the Linux kernel and glibc have support for it (the
755 glibc support being mostly copying the O_NOATIME definition to
756 bits/fcntl.h). If there's no support for it on the kernel, trying to use
757 it does nothing (since the kernel ignores unknown flags).
759 If the kernel has support for it, trying to use it either works, fails
760 silently (mostly in remote filesystems), or returns errno=EPERM (if you
761 are not either the owner of the file or root). A simple way to prevent the
762 failure is to open the file without the flag and set it later with
763 fcntl(F_SETFL), ignoring any EPERM errors.
764 kes Applied patch posted by Jaime Ventura to bug #570 to correct failure
765 of restarted jobs to complete (due to a destroyed pthreads conditional
766 variable used by the message thread).
767 kes Fixed bug #619 where Bacula would not restart jobs with MaxRestartTimes
769 kes Apply patch from John Goerzen bug #611 to fix bad manual links in the code.
770 kes Apply patch from Rudolf Cejka bug #614 to removed trailing
771 colons in query.sql file.
772 kes Apply patch from Rudolf Cejka bug #613 to correct prunning of files
773 not to create orphans.
774 kes Apply patch from Rudolf Cejka bug #617 to use mtime instead of ctime
775 in restore long listing.
776 kes Apply patch from Rudolf Cejka bug #609 to use MarkId in verify.c instead
777 of incorrect MarkedId.
778 kes Apply patch from adioso bug #616 to correct text in manual (replace
779 Director with File daemon).
780 kes Rework a few of the zlib changes so that they build properly.
783 kes Move DIR 'run' command to SD before starting the message thread
784 as suggested by Cristopher Hull to avoid a race deadlock from
785 two threads using the bsock structure.
786 kes Modify LICENSE to correct some problems pointed out by Debian.
788 kes Correct EOF with no \n lex.c problem.
789 kes Tweak compat.h compat.cpp and merge with apcupsd
790 kes Add additional INFO messages if autochanger cannot be used.
793 kes Simplify Win32 Makefile
794 kes Correct count of buffers/bytes used by smartall.c
795 kes Updated compat.h after porting apcupsd to MinGW.
797 kes Work on getting wx-console building on MinGW. wxWidgets now builds
798 started adding Makefile ...
799 kes Moved MinGW library objects to src/win32/lib to reduce clutter.
801 kes Reloading a bad configuration file doesn't kill director any more.
802 Thanks to fix from Eric Bollengier.
804 kes Fix problem of accents with new Win32 code.
805 kes Integrate Howard's VSS patch. Tweak it a bit. VSS now
806 works in the MinGW build with the exception that there
807 is a problem with accented characters -kes i.e. there is
808 some mapping problem with wide characters.
809 kes The code no longer compiles with Microsoft VC++.
811 kes Start implementing Christopher's St.Bernard code.
812 kes Add Christopher's mods for opening files.
813 kes Strip \r \n from Win32 error messages (Christopher)
814 kes Add more info about Win32 system if unknown (Christopher)
815 kes Use bstrn(cpy, cat) routines to avoid overrun in compat.cpp
816 kes Fix a number of incorrect strings marked for translation, when
817 they should not be (e.g. commands).
818 kes Fix StartTime bug reported for ClientRunBeforeJob and RunBeforeJob
819 Patches supplied by user in bugs #608 and #599.
820 kes Use most recent of st_ctime and st_mtime in restore tree DIR
821 listing. This fixes some problems with Win32 printing incorrect
823 kes Correct the clock shift comm time calculation between the DIR
824 and the FD. It was added rather than subtracted.
825 kes Strip all backslashes in filenames to be restored on Win32
826 machines -kes the names should all be in Unix format, and if
827 there are any backslashes it is most likely due to an improper
828 FileSet definition, and the files will not otherwise be
830 kes Remove lib/regex.c (replaced by bregex.c).
831 kes Delete src/win32/License.txt
832 kes Modify installer to install LICENSE
834 kes Fix bug in build-win32-cross-tools script reported by Howard
835 kes Implement cross compiled bconsole
837 kes Fix barcode test, eliminate BOOL (doesn't exist on Linux).
838 kes Write first cut of README.mingw32
839 kes Add back ua_label barcode fix from Rufolf Cejka.
840 kes Integrate the majority of the Mingw cross-tools submission
841 made by Howard Thomson. Everything compiles, with zlib, openssl,
842 and VSS turned off. Linking needs a pthreads library ...
844 kes Add 'Dir Status' button to the gnome console.
845 kes More work on migration.
846 kes Restore non-compatible base64 coding to permit compatibility.
847 kes Display heap stats in Storage daemon without debug level.
849 kes Integrate most of the MinGW changes -kes more to do.
851 kes Implement using pg_config for finding PostgreSQL files.
852 Fixes bug #600. Patch supplied by user.
853 kes Remove -t option from mktemp in mtx_changer.in and use
854 working directory. Fixes bug #578.
855 kes Update job start time after the any run before job so that
856 files created by the script are only backed up once. Fixes
858 kes Strip trailing newline only from filenames entered in
859 the restore command when reading a file. This permits
860 the user to enter filenames with trailing spaces. Fixes
861 bug #549. The user supplied a patch that I modified slightly.
862 kes Use the most recent time (st_mtime, st_ctime) in the dir
863 command in restore. This gives the user a better idea of what
864 the newest file really is. This fixes bug #574. The fix
865 was suggested by the user.
866 kes Implement a compatible version of base64. This permits external
867 programs to duplicate Bacula's base64 algorithm using standard
868 routines. This fixes bugs #296, and 565. Patch submitted by
870 ================= Note ========================
871 Previous Signatures stored in the database are no longer
872 compatible with this. The main downside is for Verify jobs,
873 and doing an InitCatalog run will fix the problem. Also, the
874 authentication between the deamons is changed, so all daemons
875 must be simultaneously upgraded.
876 ==============================================
877 If you don't like this fix, set:
878 const bool compatible = true;
880 const bool compatible = false;
883 kes Ensure that DB signature is never NULL.
884 kes Ensure that DB table names are not translated.
885 kes Fix scheduler to handle time skew (eg daylight savings).
886 kes Fix scheduler to use lock_jobs() to avoid most problems
887 with reload. Window is now milliseconds.
889 kes Apply patch from Christopher Hull
890 kes Allow multiple connections to database with different
892 kes Invalidate the scheduler when doing a reload. Fixes seg
893 fault, but still 60 second window.
894 kes Additional info in Reschedule message.
895 kes Use set_jcr_job_status() everywhere to prevent loss of
897 kes Display peer IP in FD if error from connecting DIR.
898 kes Don't increment file count for DIRBEGIN.
899 kes Replace illegal characters in Win32 filename by _.
900 kes Add SE_CREATE_PERMANENT_NAME privilege in Win32.
901 kes Hash hard link filenames rather than linked list.
902 kes Fix for security failure in chdir on Win32.
903 kes Add CreateDirectoryA/W win32 API entry points.
904 kes Add /silent option to Win32 FD for Install/Remove service.
905 kes Always print Heap statistics in FD.
907 kes Remove the -f option from the chown in Makefile.in for more
909 kes Change setting the group in Makefile.in to use chgrp for
911 kes Implement a write_store and read_store to replace
912 dirstore in reserve.c
913 kes Implement a Bacula read/write lock for Python rather
914 than using the Python lock to avoid recursive problems.
915 kes Correct the uninstall directory names in filed/Makefile.in
916 as reported by a user.
918 kes Correct some problems with database creation (new tables).
919 kes Replace a bunch of old 0x%x by %p.
920 kes Get first cut of Migration with Job selection working.
922 kes Change store_bit() to store_bool() for the Spooling in
923 dird_conf.c -kes bug reported by Robert Nelson.
925 kes Correct Makefile bug found by Dan Langille.
927 kes Correct Makefile for Solaris /bin/sh
928 kes Correct mtx-changer.in for Solaris /bin/sh
929 kes Abort if a conf resource does not have a Name =
931 kes Change the name of the regex program to bregex.
932 kes Add the bwild program to the tools directory. It is similar
933 to the bregex program.
934 kes Implement create bregex.h and bregex.c in src/lib from the
935 Python regexp program.
936 kes Use the new bregex.c to implement Regex expressions on Win32.
938 kes More work on migration.
939 kes Implement wild program in tools directory for testing
940 wild-cards. Almost identical to the regex program.
941 kes Up port VSS single thread locking code.
942 kes Replace N_(..) by NT_(...) to inhibit translation of
944 kes Modify Makefile to change the permissions on Working Directory
945 to 770 if the directory is created.
946 kes Do not fail the Makefile if changing the permissions or
947 owner/group on WorkingDir fails.
948 kes Remove early selection of Scratch Volumes in the recycling
950 kes Correct the old recycling algorithm so that Scratch Volumes
951 are selected when looking for a Volume in the changer.
952 kes Correct a typo in the Verify SQL reported by Joe Park.
954 kes Remove automatic case folding on Windows FDs. You must
955 explictly use the 'Ignore Case = yes' option.
956 kes Remove the code added to 1.38.6 and 1.38.7 that pulls a
957 scratch volume in an Autochanger early in the 'recycling'
960 kes Make weof() and clrerror() methods of class DEVICE.
962 kes Tweak license to include Microsoft restrictions.
963 kes Move mysql.reconnect to after real_connect(). Thanks to
964 Frank Sweetser for the patch.
965 kes Disallow a backslash in a File = directive (Windows junk)
966 unless the string is quoted.
967 kes Apply Eric's patch to ua_label.c so that daemon protocol
969 kes Add NT_ definition for strings that should not be translated.
970 kes Apply NT_() to ua_label.c
971 kes Remove timed wait for VSS on Win2K3 as it is not yet
973 kes Correct bacula.in script to reference bacula-ctl-xx in the
974 sysconfig directory rather than the bin directory.
976 kes Fix a long standing bug in the bacula start/stop scripts.
977 kes Attempt to add the new bacula-ctl-* files to the rpm.
978 kes Switch to using typeof() for list traversing to avoid
979 as many FC5 g++ compiler warnings as possible.
981 kes Split the bacula start/start script into four files:
982 bacula -kes starts and stops calling other scripts
983 bacula-ctl-dir -kes starts/stops the director
984 bacula-ctl-fd -kes starts/stops the File daemon
985 bacula-ctl-sd -kes starts/stops the Storage daemon
987 kes Create datestyle fix for PostgreSQL. Fixes bug #574.
988 kes Correct editing of JobId from int to int64 in fd_cmds.c
989 kes Eliminate FileSet name race with bash_spaces() and multiple
990 threads by bashing in a local.
991 kes Fix error return from 'use storage' to print a correct error
992 message rather than nothing.
993 kes Correct false re-read last block error message when two jobs
994 are simultaneously writing at the end of a tape.
995 kes Simplify exit conditions in the reserve.c code to avoid
996 possible non-release of reservation_lock().
997 kes Suffle lock order in reserve to avoid deadlock between
998 reservation lock and device mutex.
1000 kes Initialize jcr mutex before first use. Thanks to Thorsten for
1001 tracking this down for me !!!! as it broke the Win32 build.
1003 kes Integrate addition of line count limitation to bsmtp -l from
1004 Sebastian Stark <stark at tuebingen.mpg.de>
1006 kes Implement regex test program in tools directory.
1007 kes Attempt to fix time problem with bsmtp with foreign langs.
1008 kes Add strip_trailing_newline() submitted by user.
1009 kes Implement regex matching in migrate.c
1011 kes Fix bug #537 to allow arbitrary time to mount a volume for
1012 restore, if polling is turned on.
1013 kes If dir_user or dir-group is specified in ./configure apply it to
1014 the working-dir. Fixes bug #533.
1015 kes If rescheduling a job cancel the previous incarnation with the SD.
1016 Fixes bugs #566 and 557.
1017 kes Fix bug #567 do_message() definition type conflict.
1020 kes Add more jcr methods and make mutex and use_count private.
1021 kes Create lock/unlock methods for jcr.
1022 kes Fix PostgreSQL bug doing sql_data_seeek() by explicitly reading
1023 records to get to seek position.
1024 kes Integrate patch from bug #561 to correct conio.c signal definitions.
1025 kes Fix Rescheduling failed Jobs. Ensure that SD message thread
1026 terminates correctly by doing pthread_kill(). Do not destroy
1027 SD cond wait variable between executions of the job. Use local
1028 mutex for cond variable to avoid blocking jcr chain. Fix poor
1029 use of jcr use count in jobq.c for restarted jobs.
1030 kes Fix obsolete usage of foreach_dlist() to use foreach_jcr() in
1031 lib/jcr.c -kes prevents locking the jcr chaing.
1032 kes Apply patch from bug #564, which corrects listing volumes with
1033 multiple autochangers. Apply same fix to next volume list.
1034 kes Fix bug #562 where restore bootstrap file is not unique.
1035 kes More details in implementing David's migration syntax proposal.
1036 kes Save and restore dcr when swapping drives so that if we have
1037 a write dcr it is not lost.
1038 kes Use new routine lock_reservations() to lock the reservations
1039 system, and call it while looking for a volume in askdir.c.
1040 This could possibly fix bug #543.
1041 kes Stop SD command loop if job is canceled.
1044 kes Remove old code from findlib/create_file.c
1045 kes Rename mac.c migrate.c
1046 kes Add user friendly display of VolBytes in job report.
1047 kes Rename target... to previous... to make it a bit easier to
1049 kes Add selection type and selection pattern to Migration (idea
1050 given by David Boyes).
1053 kes The po files should now be current.
1054 kes Fix new sql_use_result() code to properly release the
1055 buffers in all cases.
1056 kes Use the keyword ujobid to mean the unique job id; job or jobname
1057 to mean the Job name given on the Name directive, and jobid to
1058 be the numeric (non-unique) job id.
1059 kes Allow listing by any of the above.
1060 kes Add the user friendly job report code for reporting job elapsed time
1061 and rates with suffexes from John Kodis <kodis at comcast.net>.
1062 kes Add Priority and JobLevel as Python settable items.
1063 kes Use TEMPORARY table creation where the table is created by
1065 kes Add new code submitted by Eric for waiting on specific jobid.
1066 kes Add ACL checking for the dot commands.
1067 kes Fix restore of writable FIFOs.
1068 kes Fix a bug in bpipe where the string was freed too early.
1070 kes Modify the Python class examples to inherit object -kes new way
1071 of defining classes. Patch from Felix Schwarz.
1072 kes Implement jobuid to replace old usage of job in keywords as
1073 suggested by Eric Bollengier.
1074 kes Apply patch for enhancing wait from Eric Bollengier. On can now:
1075 wait (wait for all jobs to stop)
1077 wait jobuid=unique id
1079 kes Implement write variables for Python to set Priority (anytime), and
1080 Job Level, only during JobInit event.
1082 kes Fix the block listing bug pointed out by Arno.
1083 kes Update the po files at Eric's request.
1085 kes Fix Maximum Changer Wait, Maximum Open Wait, Maximum Rewind Wait to
1086 accept time qualifiers.
1087 kes Make catalog respect ACL.
1088 kes Add recycle count to Media record.
1090 Changes to 1.39.6-beta1 24Feb04
1092 kes Add Rudolf Cejka's new rc-chio-changer.
1093 kes Implement pulling Volume from Scratch Pool if the
1094 Volume is in the autochanger.
1095 kes Implement additional command arguments for update Volume.
1099 kes Back port changes to 1.38.5
1100 kes Fix recycle SQL for StorageId.
1101 kes Fix misplaced quote in mtx-changer script.
1103 kes Note. Your database must be updated, or you must create
1104 a new database. I have not yet incremented the database level.
1105 kes Add Location table.
1106 kes Add LocationId, DeviceId, and MediaTypeId to Media record.
1108 kes Implement create/get mac record in database for adding extended
1109 Migration data to the job record.
1110 kes Add new MAC table to update/make database scripts.
1111 kes Return Storage name used when getting VolumeNames for a job.
1112 kes Change bsr file keyword Storage to Device, which is more accurate.
1113 kes Ensure that Mac records are pruned/purged.
1114 kes Tweak SD tools to deal with changing media type.
1115 kes Integrate more dev.c subroutines as methods (e.g. strerror, bsr, ...)
1116 kes Pass pointer to dcr pointer to acquire_device_for_read() so
1117 that the subroutine can switch devices, and hence dcrs.
1118 kes Modify the multiple MediaType read code to re-use the same
1119 dcr when switching devices. This makes the code much more
1121 kes Integrate patch from Karl Hakimian that reads JobIds, FileIndexes
1122 from a table for restore.
1123 kes Add Storage name to VolParams, but it really should be Device.
1125 kes Add disk-changer to scripts directory + configure/Makefile
1126 kes Eliminate PoolId from jcr -kes it is in jcr->jr.PoolId
1127 kes Implement store_bit scanner to replace store_yesno. Mostly done.
1128 kes Implement new store_bool that stores in a bool.
1129 kes Add true/false to yes/no conf directives.
1130 kes Make first cut at changing appropriate store_yesno to store_bool.
1131 kes Complete implementation of Pool storage devices.
1132 kes Move starting clones to job.c
1133 kes Move create_restore_bootstrap_file() to job.c
1134 kes Make copy_storage() more general to be able to handle
1136 kes Cleanup a lot of migration code for manual running, including
1138 kes Move getting a scratch Volume into a subroutine.
1139 kes Make all places a Volume that is added to a pool to
1141 kes Fix bug in autochanger recycle code (improper edit 64 bit).
1142 kes Fix segfault in restore command when no value specified.
1143 kes Start adding code to handle multiple MediaTypes in restore.
1144 kes Eliminate race condition in getting Volume name for
1145 two drive autochanger.
1146 kes More debug code in autochanger.
1147 kes Add storage keyword to bootstrap file, add parsing.
1148 kes Move slot in bsr file into Volume record as there will be
1149 a different slot for each Volume.
1150 kes Create reserve.h
1152 kes Implement Pool storage overrides.
1154 kes Implement first cut of Migration.
1155 kes Implement mysql_use_result() from patch by Karl Hakimian.
1156 This reduces significantly the memory consumption during
1157 the restore tree building, and hence runs faster too.
1158 kes Implement StorageId patch supplied by user (reggie) in bug
1159 #536. This should permit Bacula to work correctly with two
1161 kes Implement Job listing variations suggested by a user.
1162 kes Move updating bootstrap code in backup.c to subroutine
1163 update_bootstrap_file().
1164 kes Add new job status elapsed time and bytes written user
1165 friendly job report output patch sent by John Kodis
1166 <kodis at comcast.ne>.
1167 kes Implement a storage list in Pools.
1168 kes Separate out setup_job() code from run_job().
1169 kes Get migration working -kes lots of changes in mac.c in both
1171 kes Apply patch from user (Eric Bollengier I think) that fixes a
1172 DIR crash when no arguments are supplied to a dot command.
1173 kes Fix typo (strcpy->strcmp) in ua_prune.c as reported by Martin.
1174 kes Fix command arg name->volume in label command of gnome-console.
1175 kes Fix SD acquire.c to release correct DCR by explicitly testing
1176 on the dcr address rather than trying to devine if it is a read
1177 or write dcr. This failed in error conditions when the device was
1181 kes Apply user supplied patch for more readable rate output
1183 kes Continue implementing migration.
1184 kes Implement support for removable filesystems in SD.
1185 kes Ensure that btraceback scripts can be read by anyone.
1186 kes Replace dvd-freespace and dvd-writepart by dvd-handler.
1187 kes Correct bug where canceling restore before the FD contacts
1188 the SD causes the drive to be left in read mode.
1189 kes Move ofline_or_rewind into DEVICE::close().
1190 kes Eliminate close_device.
1191 kes Convert several dev subroutines to methods (e.g. bsf,
1193 kes Eliminate force_close_device().
1194 kes Implement Device Type directive in Device resource that
1195 can have values File, Tape, Fifo, DVD, or Prog.
1196 kes Add has_cap() method to Device.
1199 kes Add patch from bug #527 to allow RedHat user to specify
1200 options/user/group for starting each daemon in
1201 /etc/sysconf/bacula.
1203 kes Add two new queries to query.sql provided by Arno. One
1204 list volumes known to the Storage device, and the other
1205 lists volumes possibly needing replacement (error, ...).
1207 kes Add periodic (every 24 hours) garbage collection of memory
1208 pool by releasing free buffers.
1210 kes Correct bug counting sized (for display only) in smartall.c
1211 kes Print FD mempool stats if debug > 0 rather than 5.
1213 kes Make db_lock() mutex error fail the job rather than abort
1214 Bacula. Canceling the job caused the mutex to fail.
1215 kes Correct bug in alist.c that re-allocated the list if the
1216 number of items goes to zero.
1217 kes Move the reservation system thread locking to the top level
1218 so that one job at a time tries all possible drives before
1220 kes Implement a reservation 'fail' message queue that is built
1221 and destroyed on each pass through the reservation system.
1222 These messages are displayed in a 'Jobs waiting to reserve
1223 a drive' list during a 'status storage='. Note, multiple
1224 messages will generally print for each JobId because they
1225 represent the different problems with either the same drive
1226 or different drives. If this output proves too confusing
1227 of voluminous, I will display it only when debug level 1
1228 or greater is enabled in the SD.
1230 kes Add enable/disable job=<job-name>. This command prevents
1231 the specified job from being scheduled. Even when disabled,
1232 the job can be manually started from the console.
1233 kes During 'update slots' clear all InChanger flags where the
1234 StorageId is zero (old Media records).
1236 Beta release 1.38.4:
1238 kes Fix autochanger code to strip leading spaces from returned
1239 slots number. Remove bc from chio-changer.
1240 kes Back port a bit of 1.39 crypto code to reduce diffs.
1241 kes Fix first call to autochanger that missed close()ing the
1242 drive. Put close() just before each run_program(). Fixes
1245 kes Add PoolId to Job record when updating it at job start time.
1247 kes Pull in more code from 1.39 so that there are fewer file
1248 differences (the new ua_dotcmds.c, base64.h, crypto.h
1249 hmac.c jcr.c (dird and lib) lib.h md5.h parse_conf.c
1250 util.c. Aside from ua_dotcmds.c these are mostly crypto
1252 kes Implement new method of walking the jcr chain. The
1253 incr/dec of the use_count is done within the walking
1254 routines. This should prevent a jcr from being freed
1255 from under the walk routines.
1260 kes Start implementing Verify list output.
1261 kes Move the suitable_drive flag to a better place to prevent
1262 premature termination of the reservation if all drives
1263 are busy -kes should fix Arno's diff/inc pool failures.
1265 kes Add mutex to single thread VSS code in Win32.
1267 kes Simplify code in askdir.c that waits for creating an appendable
1268 volume so that it can handle multiple returns from the wait
1270 kes Modify the wait code to permit multiple returns.
1271 kes Return a zero when 'autochanger drives' is called and
1272 it is not an autochanger.
1273 kes Make rewind_dev() a method taking a DCR as an argument.
1274 This permits closing and reopening the drive if the
1275 rewind fails as happens if the drive was loaded while the
1276 file descriptor was open. This refreshes the file descriptor.
1277 kes Remove the ST_OPENED flag and always rely on fd < 0 for knowing
1278 if the device is open or not. This should eliminate
1280 kes Return error if reserve cannot find at least one suitable device.
1281 kes Make wait_for_sysop() return correct state information.
1282 kes Fix Win32 state file problem. write was not using compat
1283 code. This should fix bug #500.
1285 kes Modify gui on command to set only GUI mode and not batch.
1286 kes Modify .messages command to always print messages regardless
1288 kes If GUI mode is on, suppress automatic printing of
1290 kes Delete old bnet packet code.
1291 kes Ignore new BNET_START_SELECT and BNET_END_SELECT signals in
1292 wx-console. -kes not implemented because bconsole must be updated.
1293 kes Modify restore command in wx-console to set gui on and to use
1294 only .messages instead of messages. Hopefully this fixes bug
1296 kes Fix seg fault in exit of acquire when canceling a job --
1297 reported by Wolfgang Denk
1298 kes Pull in latest reservation system changes from 1.38
1299 kes Make .messages command always print messages regardless
1300 of the automessages flag.
1302 kes Fix seg fault if user labels a drive directory bug #513
1303 kes Remove quotes around Version as it breaks things.
1305 kes Merge in Aleksandar Milivojevic's mods to the spec file.
1306 kes Apply sparse code fix for raw drives and fifos. Bug 506
1307 kes Thorsten fixed Unicode cd problem with wx-console bug 505.
1309 kes Correct reservation system to do a last ditch try
1310 for any mounted volume, then anyone anywhere.
1311 kes Add quotes around table Version because of
1312 error in MySQL 4.1.15 -kes bug report submitted.
1313 kes Correct some minor problems with btape in the fill
1315 kes Updates to ssh-tunnel from Joshua Kugler.
1316 kes Added a report.pl program from Jonas Bjorklund.
1317 kes Simplify the O_NONBLOCK open() code for tape drives,
1318 and always open nonblocking.
1319 kes Do not wait for open() if EIO returned (shouldn't happen).
1320 kes Eliminate 3 argument to tape open().
1321 kes Correct the slot # edited in the 3995 Bad autochanger unload
1323 kes With -S on bscan (show progress) do not divide by zero.
1325 kes Make cancel pthread_cond_signal() pthread_cond_broadcast().
1326 kes When dcr is freed, also broadcast dev->wait_next_vol signal.
1327 kes Remove unused code in wait_for_device.
1328 kes Make wait_for_device() always return after 60 seconds of wait.
1332 kes Add stubs for non-crypto build.
1334 kes Use localhost if no network configured
1336 kes Eliminated duplicate MaxVolBytes in cat update -kes bug 509.
1337 kes Remove debug print.
1338 kes Add bail_out in error during state file reading.
1340 kes Merge changes made to 1.38.3 into HEAD
1341 kes Add stubs for pygtk-console code
1342 kes Create Makefile.in for pygtk-console code
1344 kes Merge updates into 1.38 branch
1345 kes Update specs to include mysql4 define.
1346 kes Fix when attributes are sent, must be after binit().
1347 kes Stop read_record() if status not ok in second loop.
1348 kes Return rec->FileIndex in dcr->VolLastIndex for normal
1349 and partial records in read_record(). This allows bscan
1350 to get FileIndex at EOT correct.
1351 kes Fix butil.c to correctly set dcr -kes fixes seg fault in bls.
1353 kes Fix Win32 built to work with new crypto code.
1354 kes Apply patch supplied by user (slightly modified) to fix
1355 correct detection of holes in block devices and FIFOs.
1357 kes Apply patch supplied by user (slightly modified)
1358 to fix SD hang with multiple pools and bad client
1359 IP. Fixes bug # 508.
1361 kes Add nagios plugin to the examples directory. Submitted by
1363 kes Remove warning message about multiple saves of hardlinked files
1364 from find_one.c as it can generate too many warning messages.
1365 kes Modify most restore error messages to be queued so that they
1366 appear at the end of the job rather than mixted with the restore
1367 listing where they could be 'lost'.
1369 kes Reset timeout values before select() per patch from
1370 Frank Sweetser for problems with non-blocking sockets.
1371 kes Unlink the state file if either reading or writing it gets
1372 errors. Hopefully this will fix Win32 exit problems.
1373 kes Add sanity check in append.c to ensure that dcr is not NULL.
1374 This can happen if multiple drive autochanger SCSI control
1375 channel and drive indicies do not correspond.
1377 kes Get next volume from Scratch pool before creating a volume.
1378 kes Set new Pool defaults in Vol when moved from Scratch Pool.
1379 kes Remove argument from create_bacula_database for SQLite as it
1381 kes Add back index code so that two drive autochangers can get
1383 kes Change a bunch of debug levels to aid debugging autochangers.
1384 kes Fix reservation so that mutexes are properly applied.
1385 kes Rework reservation algorithm so that two drives can be used
1388 kes Landon merged his data encription changes into the HEAD
1389 kes Apply days keyword patch from Alexander.Bergolth at wu-wien.ac.at
1390 If this patch is applied, the number of days can be specified with
1391 'list nextvol days=xx'
1393 'status dir days=xx'
1394 My use case is to be able to preview the next scheduled job (and the
1395 next tape to be used) on fridays if there are no scheduled jobs during
1399 kes Fix font code in gnome2 console user patch. Fixes bug #501.
1400 kes Fix malformatted bnet error message that caused seg fault
1402 kes Applied user patch to improve README.vc8 in src/win32.
1404 kes Add Migrate, Copy, Archive Job types (some where there)
1405 kes Correct some more editing of JobId's (for 64 bit compatibility).
1406 kes Ensure that StorageId is stored in Media record when ever possible.
1407 kes Add Migration Job to Job.
1408 kes Add Migration Time, Migration High Bytes, Migration Low Bytes
1409 Next Pool to Pool resource.
1410 kes Add more code to mac.c (migration archive copy).
1411 kes Change Start Storage daemon job to require read and write storage
1413 kes Pass read storage data to SD as well as write storage data.
1414 kes Remove old code from winservice.cpp
1415 kes Break on error in scan.
1416 kes Fix typo in signal.c
1417 kes Separate read/write DCR in SD. Add jcr->read_dcr.
1418 kes Cleanup how find_device() works.
1419 kes Add read output to Status in SD.
1422 kes Add red-black btree routines
1424 kes Remove abs() in bfile.c so that it compiles on Solaris.
1427 kes Fix crash in tray-monitor when daemon disconnects. Bug #479.
1428 kes Fix bnet-server bug found on OpenBSD. Bug #486
1429 kes Fix cancel failure bug. Bug #481
1430 kes Fix failure when Pool name has spaces. Bug #487
1431 kes Fix SD crash in autochanger code. Mutex failure. Bug #488
1432 kes Fix a couple of free()s in src/filed/acl.c
1433 kes Fix memory overrun in bfile.c in building OS X resource
1434 fork filename. Bug #489
1435 kes Add Pool name to SD status output.
1437 kes Apply SunOS patch for ACLs submitted by David Duchscher.
1438 kes Make sure to set storage before trying to set drive.
1439 kes Add bacula_mail_summary.sh to examples directory. It makes
1440 a single email summary of any number of jobs. Submitted
1442 kes Make sure when we do a mount to unblock the device even
1443 if the drive could not be opened.
1445 kes Remove the USE_WIN32STREAMEXTRACTION #defines (always on)
1446 and correct a few minor problems to make it build on Linux.
1448 kes Remove delete of CVS from all Makefiles
1449 kes Fix seg fault when clicking on Add button in wx-console
1450 restore panel. Bug #470.
1451 kes Fix copyright date and URL typo -kes bug #468.
1452 kes Change autostart install for FreeBSD to look for rc.conf
1453 rather than rc.local as suggested fix for bug #466.
1454 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1455 grant on status. Bug #465
1456 kes Apply patch supplied by Eric Bollengier to fix PostgreSQL
1457 update script. Bug #464
1458 kes Tweak #ifdefing a bit in new Win32 stream code.
1459 kes Fix #ifdeffing for FD_NO_SEND_TEST.
1460 kes Add documentation of performance #defines
projects / bacula / bacula / blob