1 Technical notes on version 2.2
5 kes This patch prevents the 'status dir' command from trying to use a scratch
6 volume and possibly moving it from one pool to another. This patch fixes
9 kes Fix --archivedir addition to configure. Replace it with
10 --with-archivedir in configure.in This fixes the regression
12 kes This patch fixes bug #1012 where the job is canceled because
13 of Max Run Time exceeded when the job has not yet started.
15 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
16 one 'part' to write. Instead of each part being stored on disk,
17 written to DVD, then deleted from disk, all parts are written to disk,
18 and only the last is written and deleted from disk.
20 kes Correct typos in disk-changer.in
22 kes This patch fixes the status command to include the formating string for
23 JS_AttrInsterting. It fixes bug #1021.
24 kes This patch should fix the Mac OS X build problem on the latest
25 Darwin, where sys/types.h was not included correctly (apparently
26 due to a change in the Mac headers). The solution was to explicitly
27 ensure that it is defined for the ./configure.
28 This patch also has a rebuild of configure that includes the Debian
29 qt4 kludge (look for alternate qt4 names).
30 This patch fixes bug #1020.
31 kes This patch should ensure that queued messages to the console are
32 displayed as soon as possible. It should fix bug 1007, but has been
35 kes This patch fixes the infinite loop when trying to increase the
36 maximum number of volumes in a Pool during the add command.
37 This patch fixes bug #1008.
41 kes Get fix for joblist bug in bat from trunk.
43 kes This patch fixes bug #1003 where putting the message output from
44 a Verify job into the catalog results in a recursive loop. The problem
45 seems to show up only with postgresql (to be verified).
47 kes Fix bug #942 where lots of emails where generated when the heartbeat
48 interval was low and Bacula wanted a different tape from the one in
51 ebl Apply 2.2.5-lastwritten.patch to fix the LastWritten field
52 which was updated during a restore (or a reading migration) bug #982
54 ebl Use qmake-qt4 instead of qmake when available (debian system).
56 kes Add a security warning to src/cats/make_catalog_backup.in indicating
57 that passing the password via the command line (arg 3) is insecure.
58 This responds to bug #990 (it doesn't fix it).
59 kes Apply 2.2.5-postgresql-errors.patch
60 kes Remove unneeded File table index on JobId, which is already
61 present as the first index of another multi-index.
63 kes Set default debug_level to zero. This corrects bugs #991 and #993.
64 kes Fix a crash in bat when it cannot connect to the Director for example
65 if the Director is not running.
67 kes Activate Close button on tray-monitor window. This fixes
70 kes Fix spurious warning message printed when creating a volume with
71 a LabelFormat. This fixes bug #976.
75 kes Add JobId in place of Job name in all the Jmsg() output.
76 kes Correct the APP_DESC for the Win32 storage service (remove an e).
78 kes Add new SD despooling attributes and Dir inserting attributes
79 job status codes. This fixes bug #961.
80 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
82 kes Fix doc issue. This fixes bug #963.
83 kes Fix listing performance problems in bat. Pointed out by
85 ebl Fix replace on restore. This fixes bug #969
86 kes Fix bat code that tests for Win32. This should fix bug #968
87 kes Query 5 list wrong Vol after migration. This fixes bug #960
89 kes Correct lib/Makefile.in to include enh_fnmatch.o that was removed
90 in back porting from 2.3.x
92 kes Backport almost 4000 lines of 2.3 code that fixes a number of bugs.
93 The details are included in the notes in this file.
95 kes Backport 2.3 code that fixes: it fixes incorrect or incomplete error
96 messages; it fixes a problem opening the SQLite3 database when multiple
97 simultaneous jobs were running; it fixes a bug with certain versions of
98 MySQL where batch inserts failed because of table name character case
99 (upper/lower) differences.
100 kes Fix race condition that drops final block written to volume.
101 This happens in rare cases with multiple simultaneous jobs
102 when the Volume fills. This fixes bug #964. May be related
103 to bug #935 and possibly #903.
105 kes Fix FD->SD authorization failure, which was due to spurious
106 wakeups from a pthread_cond_timedwait(). Simply check the
107 predicate before continuing. This fixes bug #953
108 dvl Add new configuration item --archivedir
109 dvl Adjust regression tests to use tmp not /tmp. This will allow
110 multiple concurrent runs of the regression tests.
112 kes Eliminate more strerror() and replace with bstrerror().
113 kes Remove BSD getopt and replace with unrestricted IBM version.
114 kes Fix Win32 build for changed calling sequences.
116 kes Fix FD->SD authorization failure, which was due to spurious
117 wakeups from a pthread_cond_timedwait(). Simply check the
118 predicate before continuing. This fixes bug #953.
119 kes Add const char where needed (more to do).
121 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
122 kes Don't overwrite error message in check_tables_version.
124 kes Unlock batch insert tables with same calls used elsewhere.
125 kes Allow starting 59 jobs a second.
126 kes Make SD session key more random.
127 kes Add retry for SQLite opening db if it fails. Probably helps
129 kes Suppress extra error messages during batch insert failure.
131 kes Put some FD auth code on dbglvl rather than fixed.
132 kes Return insert attributes error message in db msg buffer to avoid
133 false error messages. Helps fix bug #966.
134 kes Separate batch init error messages. Probably helps fix bug #966.
135 kes If Dir gets an error during inserting attributes, cancel SD.
136 This reduces unnecessary error messages.
138 ebl Cleanup batch insert code. Probably fixes bug #965.
140 kes Turn off some code when batch insert not enabled.
141 kes Edit FD name in connect error messages.
143 kes Add code to handle tray monitor separated from Win32 FD.
144 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
146 kes Fix ANSI tape labeling. This fixes bug #954.
147 kes Increase the max block size to 4MB fixes bug #957.
148 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
149 is not properly mounted (recognized) during a poll.
150 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
151 Job that has differences reports Verify OK.
152 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
154 Release Version 2.2.4
156 kes Increase size of name string when FD making connection to SD.
159 kes Add waits to multiple exit detection code to try to force pid
160 file to always be deleted.
161 kes Restore good dev.tar.gz to rescue set appropriate binary property.
163 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
164 trying to switch drives by checking for blocking before unblocking.
166 kes Cancel storage daemon in all cases where FD reports error. This
167 should fix virtually all cases of bug #920.
169 kes Fix error message that was clobbered when Dir tells SD it does not
170 have write permission on Volume. This should fix a minor point
171 in bug #942, but not the main problem.
172 kes Add code to cancel job in SD if FD connection fails. This should
174 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
175 kes Fix migration code to get correct Volume name with multiple volumes
176 by skipping |. Fixes bug #936.
177 kes Implement patch supplied by Landon to fix bug #944 where using
178 TLS with bconsole uses 99+% of the CPU.
179 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
181 kes Move patches into patches directory.
183 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
186 ebl Using 'm' in bconsole will show messages like before,
187 and not memory usage.
189 Release Version 2.2.3
190 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
193 kes Fix bug #935, and probably also bug #903 where files were not
194 restored. MediaId was not properly set in JobMedia record after
197 kes Add ./configure search in qwt-qt4 for qwt package
198 kes Apply Martin Simmons patch that should turn off the new API usage
199 when batch insert is turned off allowing building on older
202 Release Version 2.2.2
204 ebl Detect if new PosgreSQL batch insert API is present.
205 kes Correct incorrect mempool call causing Director crash.
206 sb Update spec files for 2.2.1 release
208 Release Version 2.2.1
210 kes Update POTFILES.in
211 kes Cleanup a few underquoted AC_DEFUNs in configure
212 kes Apply patch from Martin Simmons that adds a test for va_copy to
215 kes Fix bug #921 by increasing the number of tries to create a new volume
217 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
218 can be called multiple times. Implement a version for machines
219 without va_copy() that gets a big buffer.
221 kes Integrate more portable zone offset code into bsmtp.c
222 Submitted by Attila Fülöp.
224 kes Fix bad SD->FD return status reported by
225 (James Harper) <james.harper@bendigoit.com.au>
226 ebl Fix a bug in read_close_session which return random status
227 thanks to James Harper
229 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
230 and directory names during restore of single file/directories.
231 kes Add sanity checks to .sql command when string is empty. Hopefully
232 that will resolve Dirks Director crash.
234 kes Apply patch submitted by Martin Simmons that corrects a seg fault
235 in the bsmtp chat subroutine when debug is >= 10.
237 kes Fix Director crash when running bat SQL queries.
238 kes Add David's notes on Item 8: Copy pools.
240 kes Rework projects file to be current and ready for a vote.
241 kes Enhance lex scanner error message.
243 kes Tweak LICENSE file to mention BSD code.
244 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
245 if specified on the ./configure.
246 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
247 This class is intended to allow us to open a second bsock to the
248 Director while in the restore subdialog.
250 kes Fix configure to create bat Makefile before creating dependencies.
251 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
252 kes Add a tooltip to the tray monitor.
253 dvl Set the Director's PID file before dropping privs. This fixes
256 kes Update AUTHORs file
257 kes Increase the default max concurrent jobs to 20 in FD and SD to
258 correspond with the default .conf files.
259 kes Rewrite the Win32 service routines. This eliminates the 3 copies
260 some different, of the same file created by RN when porting the
262 kes Rearrange some of the Win32 directories and the placement of the files
264 kes Set DEVELOPER flag in version.h
266 ========================================================================
267 Release Version 2.2.0
269 kes Apply a second doc patch from Marc.
270 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
271 improves the tips section that discusses how to setup multiple
274 kes Update bat README file.
275 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
276 corrects a typo in the Recycle status check in db_find_next_volume().
277 This will probably fix a number of annoying problems with multiple
279 kes Modify most of dird/msgchan.c to use bsock class calls rather than
280 bnet calls -- no functionality change.
282 kes Modify the Verify output to specify if files are missing on
283 the Volume(s) or disk. Fixes confusion in bug #916.
284 kes When more than one Volume is read in a migration job, the last
285 Volume bytes reported are from the last read volume rather than
286 the last written volume. Fixed. This fixes bug #910.
287 kes Fix display of Recycle flag after update volume=foo recycle=yes.
288 It previously printed New Recyle flag is: no. This fixes bug
291 kes Correct seg fault when switching tape drives during restore.
292 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
293 be used until after 2.2.0 release.
295 kes Remove fnmatch() in SD that permitted wild card specifications.
298 kes Fix %g in filename returned by SQL for browse tree reported by
300 kes Fix configure so that it puts config.out in the cwd rather than
302 kes Attempt to fix the locking problem reported by Eric in bug #906.
303 kes Make berrno class to leave errno unchanged after constructor call.
304 kes Make bnet_server use the heap rather than the stack to allocate
305 its socket fd pointers to avoid a crash at termination. Problem
306 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
308 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
309 and putting it in depkgs-qt along with Qt4.3.
311 kes Rework code in acquire.c that switches drives for reading when
312 the Media Type does not match. This should fix bug #906
314 ebl Fix a director segfault during job setup #907
315 kes Correct seg fault in postgresql when first operation returns no
316 rows. Fixes Dirks File browser problem seg fault with bat.
318 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
319 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
322 kes Implement PopUp YES/NO dialog for bat.
324 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
326 kes Correct RunScript to terminate job in FD on failure.
327 kes Change abort_on_error and AbortJobOnError to fail_on_error
328 and FailJobOnError in RunScripts.
329 kes Minor tweaks of code formating in RunScripts, principally to
330 avoid depassing 80 columns.
332 kes Eliminate one #ifdef Win32 in bsmtp
333 kes Implement grow tool to grow a file for testing very large databases.
334 kes Add big-vol-test to test Bacula seeking with > 5GB.
337 kes Modify find_next_volume() to return all values in Media record.
338 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
342 kes Update Release notes
344 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
345 Warning, in previous beta version, all media get from scratch keep their
348 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
349 This should fix bug #842. Made a note to look at removing the temp
350 files at the end of the install.
351 kes Add ability to mount and unmount a file device providing it is
352 marked as being removable and has the appropriate mount and unmount
353 commands defined in the Device resource. This fixes bug #830.
354 kes When applying a storage override, release all previous storage
355 definitions rather than just prepending the new storage.
356 This should prevent a good deal of confusion.
358 kes Implement ./configure search for qwt libraries.
360 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
361 Win32 FD. This should fix bug #893.
362 kes Remove an unnecessary beep in Win32 init code.
363 kes Update copyright dates in Win32 executable about boxes.
364 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
365 code with a BSD getopt.c and getopt.h.
366 kes Remove sched.h from the Win32 compat directory -- not used.
367 kes Remove the Exit menu item from the Win32 tray monitor. If you really
368 need to shut it down, do it through the services panel or the command
370 kes Remove some inappropriate Bacula FSFE copyrights.
371 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
372 kes Fix regress config non-portable test as pointed out by
373 Florian Heigl <florian.heigl@gmail.com>
374 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
375 as pointed out by Florian Heigl <florian.heigl@gmail.com>
377 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
378 Reported by Frank Sweetser.
382 kes Fix client-only build.
383 kes Integrate client-only fixes for bsys (initgroups) and conio from
384 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
385 kes Make arguments to get_scratch_volume() in same order as other
387 kes Rework the prune_volumes() subroutine so that after purging and
388 no volume found in desired pool, it will check for a scratch
389 volume. This prevents recycling the whole scratch pool.
390 kes Add code to status storage to print boffset_t (largefile support).
392 kes Move qwt (Graphics libarary for Qt4) to depkgs.
393 kes You now need a --with-qwt=<dir> to be able to build bat.
394 kes Update src/win32/cats/bacula_cats.def to include the new
395 db_get_query_dbids() call on Win32.
397 kes Correct a problem when selecting a scratch volume and moving
398 it to another pool that lost some columns.
399 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
400 kes Enhance Autochanger error messages to include Volume and device name.
401 kes Rework prune_volumes() code to take account of InChanger flag,
402 and to handle recycling volumes going to the Scratch pool and
403 current pool because the RecyclePool directive.
404 kes Implement a better and more efficient db_get_query_dbids() to
405 handle creating and passing back a list of DBIds.
409 kes Start work on new more efficient DBId subroutine. First use
410 will be for recycling volume to Scratch inchanger.
411 kes Increase number of JobIds in pruning from 1000 to 10000.
412 This to be replaced by above routine.
413 kes Begin implementation of building Qt4 on Win32.
414 kes Correct typo in fix I added for bad TLS shutdown.
415 kes Pull 2.0.3 patches into patches directory.
416 kes Update Release notes. Include qt-console in line count.
417 kes Update Projects file.
419 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
420 bug in migration code where a job that spanned two volumes
423 kes Implement new BST_DESPOOLING blocked state. Change from locking
424 during despooling in SD to blocking. This means that other threads
425 can work with the device structure, in particular the reservations
426 system while despooling.
428 kes Fix return in reservation message queue that missed clearing
429 the jcr lock (implemented 26Jun07 below).
430 kes Rename a number of dev methods to make locking function names
432 kes Document locking in lock.c. Move lock structures to new file
435 kes Move reservations message lock to lock jcr only this
437 kes Move main SD locking code into lock.c (new file).
438 kes Update Win32 build to include lock.c
442 kes Dirk committed the qwt library code for drawing graphs in bat.
443 kes Tweak install of qwt so that it is integrated with ./configure.
445 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
446 out by Eric (my typo).
447 ebl Fix configure.in to get batch mode enable
448 kes Return correct string from authenticate.cpp in bat when connecting
450 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
451 spurious line drops when using TLS.
452 kes Do not file reparse points when restoring a file that already
455 kes Implement Windows reparse points -- similar to directories, but
456 we do not descend into it. This is a first cut. They seem to
457 be backed up, but restore is not yet tested.
458 kes Remove restore_blocking in tls code when shutting a socket to leave
459 it in blocking mode. Hopefully this will fix the encryption bug
460 reported by Frank Sweetser.
461 kes When opening a file for backup, tell the OS that we are going to
462 read it sequentially -- optimization.
463 kes Change variable names in authenticate_director() to not conflict
464 with member names in bat. Caused great confusion with compiler,
467 kes Queue openssl error messages in case of comm problem.
468 kes Do shutdown() call if socket terminated.
469 kes Remove some duplicated code in tls.c
470 kes Move more of the bsock member variables into private and access
472 kes Add Frank Sweetser's tls-test to the regression suite.
474 kes Add Swedish sv.po file
476 kes Don't print clock skew message in FD if less than 3 seconds diff.
477 kes Add a bit of VSS info to status client.
478 kes Implement a first cut of Vista VSS, using Win2003 code.
482 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
483 loaded tape but uses first drive).
484 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
485 This was indeed a Win32 issue.
487 kes Simplify search of autochanger for in-use Volume.
488 kes Fix exit condition of check for in-use volume. kes Remove
489 inappropriate my_postgresql_free_result() in db_close()
491 kes Fix bad return in FD when encryption signature not found.
492 Probably caused a crash.
493 kes Inhibit missing encryption signature error messages for
494 file types where no signature computed.
495 kes Correct inverted check on autochanger in reservation system.
496 kes Tweak debug code in autochanger reservation.
498 kes Add some additional locking in the cats directory in subroutines
499 that modify packet variables called from batch insert.
500 kes Rework how dcrs are allocated. new_dcr() can now be called
501 with an existing pointer, and it will simply clean it up.
502 This allows the reservation system to test various different
503 devices, and will permit easy device changes.
504 kes A bunch of changes all over to handle new new_dcr() calling
506 kes Work more on the Volume management in the SD. Remember Volumes
507 for tape drives and for autochangers (even virtual disk changers).
508 kes When looking at the Volume list to reserve a drive, handle
509 autochanger names correctly by interating through the changer
510 devices. Also call the Director to see if a Volume is suitable
512 kes Fix some bugs in bscan. Make sure all media records are written.
513 Make sure that valid JobMedia records are written for disk files.
514 Previously they were completely wrong.
515 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
516 that the URLs don't change and so that the developers will all
517 work off the same copy. Rebuild from scrach.
518 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
522 kes Fix seg fault in FD from incorrect digest size.
523 kes Fix argument to non-OpenSSL crypto.c subroutine.
527 kes Remove a few malloc()s from the encryption code.
528 kes Use the class calls to bsock in filed/backup.c and restore.c in
529 place of the old bnet_xxx code.
530 kes Implement code that does an on the fly calculation of the
531 signing digest during restore of encrypted files. It makes
532 a best guess at the algorithm, and if it is not correct, will
533 then revert to the old code which reads the file after it is
535 kes Implement at least one missing crypto stream in stream_to_ascii()
536 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
537 #877 where a reload with bad syntax causes Dir to exit.
539 Cut: 2.1.14 beta (not released)
541 kes Do not free a volume on a tape drive until another volume is
542 mounted and read, or the autochanger unloads the volume.
543 This should help the SD re-use volumes that are already mounted,
544 and should fix bug #886.
545 kes Apply patch from user brettedgar that allows gnome2-console include
546 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
547 kes Apply patch from Lucien Weller that fixes day of week calculation
548 because of DST flag problem. Fixes bug #887.
550 kes Move find_next_appendable_volume() to after acquiring a valid device
551 in reserve.c. This fixes bug #864 -- confirmed by reporter.
553 kes Unable to reproduce bug 872. However added additional testing for
555 kes Bug #874 resolved by documenting SQLite limitations.
556 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
557 kes Bug #881 resolved by removing typo in mtx-changer script.
558 kes Made Frank Sweetser's wiki the official Bacula wiki with his
559 approval. Added a link to the wiki on the web page, and implemented
560 a backup from http://paramount.ind.wpi.edu
562 kes Fix update allfrompool to pass pool name.
564 kes Convert to pure GPL v2 license.
565 kes Fix sscanf problems reported by Peter Buschman that caused
566 a bus error on Solaris.
567 kes Rework (simplify) the select prompt in bat.
568 kes Move get_jobid_from_tid() into lib and create a
570 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
571 should definitely fix the problem of lost error messages in the
573 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
574 kes Eliminate tcpd.h from the project. Enclose the #include from the
575 library with extern C ...
576 kes Add print of signal name when a signal is trapped.
580 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
582 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
583 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
584 makes SQLit3 run 30 times faster, though a bit less safe.
585 kes Implement --with-batch-insert in configure and detection of thread
586 safe libraries. It is on by default, but turned off if no thread
587 safe library (e.g. SQLite 2) is available.
589 kes Fix Bacula PostgreSQL buffer overruns.
590 kes Do better checking for NULL results returned from PostgreSQL;
591 implement retry for failed queries; clear results buffer after
592 failed query. Hopefully this will correct the PostgreSQL failures.
594 kes Implement algorithm to handle only one appendable volume with
595 Prefer Mounted Volumes = no.
596 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
597 returned from a query.
598 kes Make volume lock recursive.
599 kes Implement an additional volume reservation algorithm that
600 starts by considering all reserved volumes then uses the
601 old brute force algorithm of searching the resources to
602 find a suitable device.
603 kes Add new reservations debug code and refine the old code.
604 kes Update the win32/dll/bacula.defs file.
606 kes Tweak reservations algorithm to permit a few more cases, i.e.
607 volume reserved, but on different drive, ...
608 kes Enhance SD status to include Pool and Media Type for drive in a
609 more readable format (a bit longer).
610 kes Fix PostgreSQL double free.
612 kes Minor refactoring of restore decryption code.
613 kes Add code to smartall.c to detect double free of a buffer.
615 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
616 so that bsmtp will create a correct email address (mailbox only).
617 kes Modify 'memory' command so that the buffers are listed as 'In use'
618 to avoid confusion with Orphaned buffers.
619 kes I reworked the OpenSSL include/lib flags to be handled in
620 the standard Bacula way, which should fix bug #863 concerning
621 non-standard OpenSSL libraries.
623 kes Implement Help Browser window for bat.
624 kes Fix reload bug that reset StorageId to zero.
626 kes Fix TLS #ifdefing when TLS turned off.
627 kes Ensure that when labelling a tape with Slot=0 that InChanger
629 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
631 kes Add StartTime to final uar_sel_jobid_temp query so that we can
632 add DISTINCT (required by PostgreSQL).
633 kes Implement BSOCK authenticate_director() method. Eventually will
634 authenicate all daemons.
635 kes Move several more functions into the BSOCK class.
637 kes Add code to tell the OS that we no longer need a cached
638 file that we were reading. In findlib/bfile.c. Also,
639 only cache files that we are reading. Thanks to
640 Tobias Oetiker <tobi@oetiker.ch> for the idea.
641 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
642 kes Implement script to automatically generate cats and dll .def
644 kes Update README.mingw32 to include new .def file generation.
645 kes Correct typo in UTF-8 error message as reported by:
646 jhernandez <julianhernandez@gmail.com>
647 kes Add additional sm_check() code on debug level 1.
648 kes Set default debug level to 1.
649 kes Trap SIGABRT in attempt to get traceback.
651 kes Reduce bat connect timeout from 30 to 15 seconds.
652 kes More restructuring and implementing BSOCK class in place of
654 kes Remove a few unnecessary malloc() tests in crypto code.
655 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
656 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
657 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
659 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
661 kes Fix Verify InitCatalog. The attributes were not pointing to the
662 correct saved location.
663 kes Implement message callback so that GUI is sure to get all
664 daemon messages. Currently displayed in a dialog in bat.
665 kes Ignore SIGUSR2 (Bacula timer) in bat.
666 kes Apply regress patch from bug #859 to allow regress to work
667 with Solaris compiler.
669 kes Begin adding TLS support to bat.
670 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
671 clean up lex.c and make it more readable.
673 kes Move more bnet functions into the BSOCK class.
674 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
675 kes Complete change of berrno strerror() method to bstrerror()
679 kes Cleanup incorrect email addresses in bsmtp.
680 kes Make bat display initial messages rather than discard them.
682 kes First cut of adding .mod to the run command.
683 kes Implement auto display of messages in bat.
684 kes Enhanced preferences to allow all Bacula output to be
687 kes Try to make bsmtp date routines more generic.
688 kes Fixed bug #856 autochanger documentation.
689 kes Rework bsmtp date editing for Win32. This fixes bug #854.
690 kes Add new cats entry point so Win32 builds.
692 kes Attempt to fix bsmtp date editing on OSes without %z editing.
694 kes Do better checking for the MySQL 64 bit libraries looking for both
695 .a and .so libraries.
696 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
697 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
698 kes Require the thread safe version of MySQL during configure. Thanks
699 to Andre Noll for pointing this out.
700 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
701 continuing in migration code.
702 kes Apply implementation of tray-monitor font derived from gnome-console
703 submitted by Andreas Piesk <a.piesk@gmx.net>
705 kes Eliminate important memory loss in SQLite
706 kes Fixed the batch insert MySQL thread specific data that was not
707 being freed. See cats/mysql.c:db_thread_cleanup().
708 kes Fix restore before command.
709 kes Convert old hdr.name to name() in a few places.
710 kes Implement update jobid command.
711 kes Return all time_t dates in db_get_job_record()
712 kes Stop watchdog in SD earlier.
713 kes Put Pool just after Storage in please mount message.
714 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
717 kes Update the po files.
718 kes Fix Verify InitCatalog by making it cache attributes.
720 kes Change name bacula-bat to bat for man 1 page to correspond to
722 kes Check for client and store NULL pointers in status command. This
724 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
725 kes Fix sign extended editing of %p.
726 kes Clean out a little old #ifdefing in cats/mysql.c
728 kes If time diff between DIR and FD is more than 600 seconds convert
729 INFO message to WARNING.
730 kes Implement heap size display in status for all daemons.
731 kes Attempt to fix MySQL db open memory loss (not successfull).
732 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
733 kes Eliminate memory loss in MySQL (possibly other SQLs) during
734 Query. This looks like a MySQL but but by doing extra releases,
735 the memory goes away. This should fix bug #847.
737 kes When backup fails, cancel SD before waiting for sd termination.
738 kes If SD is waiting for FD to connect during cancel, wake up the
740 kes Fix fsf code so that errno is correctly reported.
741 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
743 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
744 so that Bacula doesn't later stumble into a seg fault.
745 kes Use the term Restore Client in the restore Job report.
746 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
747 the original job's FileSetId.
748 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
749 spooling in migration jobs. Not yet tested.
750 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
751 reading conf file from a pipe. However, do it with open_bpipe()
752 rather than popen. Not yet tested.
754 kes Fix an ugly bug where the VolCatBytes were getting updated
756 kes Implement bconsole memory command that prints current memory
757 usage, plus smartalloc dump.
758 kes Clarify some error messages in backup, admin, and migrate.
759 kes Shrink label dialog to smaller size.
760 kes Invert Cancel OK buttons on restore to be OK Cancel.
761 kes More strerror() to bstrerror() conversions.
763 kes Start implementing bstrerror() in place of strerror().
764 kes Stripping path -- seems to work.
766 kes Prevent door and port files from being restored (mostly
768 kes Free an unreleased buffer in compat code.
769 kes Change console Job name from *Console* to -Console- to eliminate
770 Win32 filename problems. Put Win32 path separator when creating
771 Console file. This fixes bug #846.
772 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
774 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
776 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
777 to force Win32 error message.
779 kes First cut strip path. The data should be passed to the FD,
780 but nothing is done with it yet.
781 kes Enhance the digest and signature routines in the crypto
782 library to accept a JCR and to use it to print error messages
783 so that they will go in the Job report rather than the daemon's
785 kes Simplify some of the verify signature code.
786 kes Simplify a few of the alternative returns in the signature
789 ebl Use only POSIX regex instead of GNU regex in breg.c for
790 File relocation. It fix broken freebsd compilation.
791 kes Convert all other Dir files to use new ua class message
793 kes Tentative fix for missing digest signature in bug 807.
794 kes Correct handle problem in new win32_ftruncate routine.
795 kes Convert ua_purge.c and ua_update.c to use new ua class
796 message routines for bat.
798 kes Correct incorrect installation of LICENSE in Win32 installer.
799 kes Display LICENSE at the beginning of the Win32 install.
800 kes Attempt to correct the need for the png files to be installed
802 kes Reapply my bat.conf install script in qt-console. I think I
803 editted bat.pro instead of bat.pro.in and it was lost.
804 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
805 the /var/lock/subsys for subsysdir. Also corrects typos in the
808 kes First cut update job.
809 kes Correct configure to include qmake of src/qt-console directory.
811 kes Make restore job yes/mod/no print in one command so GUI works.
812 kes First cut implementing backup and restore client.
813 kes Correct editing in Verify output that caused a seg fault.
815 kes Insure that bat.conf is not overwritten during installation.
816 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
817 while I was implementing migration in March 2006 !
819 ebl Cleanup file relocation, using char *RegexWhere instead of
820 char *where + bool where_use_regexp
821 kes Update some manpages and add bat manpage.
822 kes Make a first cut at converting bacula.spec.in for bwx-console
824 kes Apply patch from John Goerzen to add hostname as fourth argument
825 to make_catalog_backup script.
826 kes Fix typos I introduced into bsmtp.c
827 kes Make pm_strxxx() routines handle input of NULL pointer. This
828 is to protect from NULL pointers returned from SQL databases.
829 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
830 kes Add more debug to FIFO code -- fix fifo regression test.
832 kes Implement posix_fadvise in FD, and for reading spool files in SD.
833 kes Add thread timer to bnet_connect() to break from OS if wait time
836 kes Update Win32 build to include new files, new symbols, and
838 kes Implement socket level heartbeat (tcp_keepidle)
839 ebl Commit File relocation patch
840 kes Make bat have 'make install' target.
841 kes Warn during install if old gnome-console binary found.
842 kes Warn during install if old wx-console binary found.
843 kes Add -8 option to bsmtp command line to add content type utf-8.
844 Fixes bug #809. (Character coding problem in bsmtp).
845 kes If < is found in target (from, to, cc) then do not enclose the
846 target in < > in bsmtp. Fixes bug #772 (malformed address).
847 kes When printing certain items in dbcheck, stop after 300000.
848 Fixes bug #822. (dbcheck loops).
849 kes Incorrect status in Dir after waiting for mount with poll set.
852 kes Extend idea of Prefer Mounted Volumes to mean a volume about
854 kes Print waiting to reserve a device every 5 mins.
856 kes Don't call close_part in label.c if tape and relabel.
857 kes Don't free volume if busy in close() -- should help with
859 ebl Fix #824 RunScript bug (After script could be execute twice)
860 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
861 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
862 Add a regression script to test RunScript
864 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
867 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
868 deprecated. No additional bugs will be fixed, and they will be dropped
869 in a future release (probably 2.4.0).
870 kes Change name of wx-console to bwx-console to make it more Bacula
872 kes Change the name of gnome-console to bgnome-console to make it
875 kes Some time in March, a Feature Request with patch from Jorj Bauer
876 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
878 The ability for the director to validate a Client (FD) CN against
879 an arbitrary set of patterns rather than the hostname, with
880 A new 'TLS Allowed CN' set of directives which are implemented
881 in the Client resource. Then pattern matching is used in place
882 of hostname matching against the Certificate's CN. As an example, we
883 have certificates which (a) use a local CA, and (b) have a CN of the
885 kes Add new/changed entry points to Win32 build
886 kes Create unaccepted-projects for projects that are not accepted.
887 kes Simplify locking in the reservations system.
888 kes Add more debug code in reservations.
889 kes Make sure error condition on reserving a volume is handled correctly.
890 kes Correct handling of volume_in_use.
891 kes Correct handling of initializing a device.
892 kes Move handling of broadcasting releasing a device into release_device().
893 kes Correct attaching dcr to dev so that it is only done if device
894 is properly initiated.
896 kes Locking debug level tweaks in SD.
897 kes Tweak new Volume code.
899 kes Add exec external-command [wait-seconds] to bconsole. This
900 executes the external-command. Note! normally external-command
901 should be enclosed in double quotes.
902 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
903 it should normally be off in a production system.
905 kes Implement die command for SD so that we can force it to dump.
906 kes Implement SD lock debug code.
907 kes Implement new algorithm for keeping Volume list in SD. It
908 is now owned by the device.
910 kes Implement new code for freeing in use volumes that should
911 resolve if not all, some of the problems of multiple drive
912 tape conflicts described in bug 801.
914 kes Fix gui/bacula-web/images files in svn.
915 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
917 ebl Fix a bug in batch mode (in string escape)
918 kes Correct migration prune SQL typo that crept in in a
921 kes Move bnet_despool() into class in bsock.c
922 kes Modify job report to include director name and Build OS.
923 kes Move drop root privilege and check_catalog() before fork.
924 kes Add update database scripts (version 9 to 10) to updatedb directory.
926 ebl Check size and age of each file after its backup to see if
927 it has changed during backup, if 'checkfilechanges' is set.
928 The FD will do an extra check (stat(2)) after
929 each file backup. mtime, ctime and size are compared with
930 'before backup' information. If time or size mismatch, an
931 error message will be generated. You must upgrade FD to use it.
933 kes Make database name and user configurable
934 --with-db-name=xxx --with-db-user=xxx
935 kes Add back database type to message.c for debugging.
937 kes Implement dir_sql() which issues an SQL query.
938 kes Modify bat medialist to use dir_sql() and do some minor C++
939 formatting as well as eliminating a number of pointers, simplifing
942 kes Fix some of the mtx-changer grep commands for tape label readers.
943 kes Convert a number of bsendmsg into the appropriate send/warning/error
945 kes Suppress the using database message in the .sql command.
946 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
948 kes Add context menu for floating a window.
949 kes Some minor cleanup and name changes in qt-console
950 kes Add doing mt setblk 0 in Win32 mtx-changer.
951 kes Apply Martin's bug fix to move definition of ENODATA for
953 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
956 kes More pruning cleanup.
957 kes Turn on wait_for_drive by default in mtx-changer.
958 kes Turn on Batch insert code by default as it now passes regression.
959 kes Add ./configure --enable-bat to enable building of Bat.
960 No install yet though.
962 kes Implement a new .sql command for bat.
963 kes Implement code to turn off pruning in obtaining the next volume.
964 Pruning is turned off for the status dir command, but turned on
965 for SD requests and for the list nextvolume command.
967 kes Correct Qmsg() that was not updated correctly when committing a
968 previous change (probably the recent TLS patch).
970 kes Write new subroutine is_volume_purged() that explicitly checks
971 if the Volume is purged, and if so marks it as such. This should
972 resolve problems reported about needing to mount twice to recycle
974 kes Rewrite pruning algorithm to do more work in the SQL engine, and
975 to pass a list of JobIds to be deleted to SQL. Also, minimize the
976 amount of duplicated code.
977 kes Do volume pruning only for the Media Type desired (reduces pruning time
978 if multiple Media Types are in the same pool).
979 kes Implement more detailed info in the Job report for the Bacula version
981 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
983 ebl Add bbatch tool to bench database and insert mode.
984 Fix sql quote stuff in batch mode
985 Fix sql stuff for mysql
987 kes Correct problems with am/pm scheduling. Fixes bug #808.
988 kes Implement new prunning code that prunes up to 1000 jobs at
989 the same time. The same technique can be applied to a number
990 of other prune/purge subroutines.
991 kes Add an insanity check when starting a new tape job to ensure
992 that the tape position has not been changed. If so fail the
994 kes Fix Win32 build for dlls to add the folllowing:
995 src/lib/bsock.c -- new file with new entry points
996 src/lib/dlist.c -- new entry points
997 src/cats/sql_create.c -- new entry point
998 src/cats/sql_cmds.c -- new DATA item exported
1000 ebl batch mode cleanup bscan-test is ok now.
1001 kes Implement SD code to check length of disk volume before appending.
1003 kes Correct return status on db_batch... routines.
1004 kes Add call to db_write_batch_file_records() to migration code.
1005 ebl Fix AfterJob timing
1006 kes Move the checking of the database in initializion of the Director
1007 to after we drop privileges. This avoids the need for both root
1008 and bacula access to the DB.
1009 kes Correct a misplaced variable definition in src/filed/backup.c
1010 kes Correct how the new batch insert db_create_attributes_record()
1011 uses the arguments. Caused a seg fault in bscan.
1012 kes Implement lock() and unlock() methods in DEVICE class.
1013 Implement block() and set_block(xx) methods in DEVICE class.
1014 kes Modify bnet_connect() so that it uses time() to check for the
1015 wait time expiring (on some OSes, some system calls may not
1016 return immediately).
1017 kes Modify Verify to obtain the previous JobId when it is actually
1018 running rather than at schedule time (as it was in 1.38.x).
1019 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1021 kes When checking pid in pid file, continue running if the pid is
1022 the same as ours. This occurs on IRIX after a system crash.
1025 kes Extend new GUI API.
1026 kes Make the ua structure a class, and implement send_msg(),
1027 error_msg(), warning_msg(), and info_msg().
1029 kes Apply fix from for building wx-console on the Mac from
1031 kes Implement new select mechanism for GUI programs.
1032 kes Reorganize initialization of stackedWidgets in bat.
1034 kes Add updated nagios plugin supplied by Christian Masopust.
1036 kes More bat implementation.
1037 kes File migrate bug with Pool Occupancy using mediaid instead
1038 of jobids. Fixes bug #795.
1039 kes Fix orphaned buffers in filed backup and verify due to
1040 crypto buffers not freed during errors. Fixes bug #789.
1041 kes Extend new GUI api code to tree commands.
1042 kes Ensure that tree and dot commands check console ACLs.
1043 kes Permit marking directory with trailing slash.
1044 kes Allow 20 console connections (instead of only 10).
1046 kes Add smartctl call to bacula-sd.conf as an example of getting
1049 kes Modify jobq.c to let simultaneous restore jobs run. This may
1050 cause them to fail if they cannot get a drive.
1051 kes Add Client Connect Wait to Storage daemon to permit users to
1052 modify the time the SD waits for a FD connection.
1054 kes Correct virtual changer check which was backwards. This caused
1055 volumes to be unloaded into slots already occupied.
1057 kes Apply Command ACL filter to JobId list in restore command.
1058 kes Correct typeo in var.c patch.
1060 kes Don't let Bacula prune File or Job records for the current Job.
1061 kes Fix variable substitution pad + inc bug reported (with patch)
1064 kes Correct SQLite log table index as reported by Luca Berra.
1066 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1068 kes Begin implementing new comm signals for API.
1069 kes Fix a few places in lib/message.c where the open fd may
1071 kes Continue implementing lib/bsock.c (real class). Make jcr,
1072 who, host, and port private. There are new methods to access
1073 them for non-class use. This required touching a number of files.
1075 kes Add LANG=C to autoconf/randpass so it works with languages other
1076 than English. Fixes bug #788.
1078 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1080 You will not be able to generate Include/Exclude list any more.
1081 It will be fixed soon.
1082 If you want to use this, you can apply
1083 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1085 kes Restore of sockets created false error messages because Bacula
1086 no longer restores sockets, but the code was still trying to
1087 set the attributes on a non-existent file. Reported by a user.
1088 ebl finish RecyclePool feature
1089 Media will takes Pool.RecyclePool
1090 when moving from Scratch to a Pool or when user will do
1091 update volume=xxx frompool
1092 To use it, add RecyclePool = aPool to your Pool resource
1095 RecyclePool = Scratch
1099 kes Expand new BSOCK class adding signal() and new BNET signals.
1100 kes Begin enhancing the dot commands adding a new API function
1101 that returns more information and will make it easier
1102 to interface to the Director from a program.
1104 kes Make DEVICE fd private. Its new name is m_fd, and can be
1105 obtained with dev->fd() outside the class. This is the
1106 first of many DEVICE members to be made private.
1107 kes Implement Michael Renner's idea on having a virtual disk
1108 changer. I made some minor modifications (e.g. I did not
1109 implement the Virtual Changer directive, but simply set
1110 the Changer Command to an empty string.
1112 kes Implement a BSOCK send() method that writes the whole record
1113 in a single write() request rather than in two.
1114 ebl add update volume=xxx recyclepool=yyyy
1115 volume takes recyclepool from pool when using update volume=xxx from pool
1117 kes Fix encryption deblocking bug, which caused some restored files
1118 to be truncated. This fixes bug #763.
1119 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1120 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1122 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1123 ebl Use btime_t instead of uint64_t in media patch.
1125 kes Optimize the use of the database a bit in the Status dir command.
1126 Only open it when needed, ensure that if any previous database
1127 was opened, it is closed.
1129 kes Correct VolCatBytes bug from media patch.
1130 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1131 in the case of orphaned records.
1132 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1133 and File records in 300K chunks to be more efficient. This
1134 idea came from Juan Luis Frances (if I remember right).
1135 kes Apply Eric's scratch patch that moves a purged Volume to
1136 the RecyclePool. Question: how is RecyclePool set? what
1137 happens to the ScratchPool?
1138 kes Apply Eric's media patch that collects read/write media
1139 times as well as byte counts. This patch requires a
1140 simultaneous upgrade of the DIR and SD. Note, there
1141 should be some way to turn off timing. I'm not sure
1142 times are in Bacula units.
1143 kes Apply Eric's batch-insert patch.
1145 kes Update projects list.
1147 kes Implement Include/Exclude file lists in FD as dlists using
1148 the new dlistString class. This permits efficiently having
1149 large include/exclude lists and completes project Item 25.
1150 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1151 console is authorized to cancel the job. This fixes bug
1153 kes Modify SD so that the VolCatJobs medium record is updated
1154 at the beginning of a Job rather than the end. This
1155 fixes bug #775 where exceeding MaxVolJobs caused jobs
1157 kes Added a mutex around getting and setting Volume information
1158 so that multiple simultaneous jobs will single thread.
1160 Switch to using Subversion
1161 kes Remove src/pygtk-console/ from configure
1163 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1164 plus the entrypoints.
1165 kes Apply patch supplied that corrects debug print
1166 in canceling jobs for max run time. Supplied as
1167 part of bug #621, which was previously fixed.
1169 kes Test on job_canceled() and sd_msg_thread_done inside
1170 loop starting the message thread to avoid a race condition.
1172 kes Remove rl_catch_signal from console.c as it conflicted
1173 with the header definition. Fixes bug #765.
1174 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1176 kes Clarify some stored/acquire messages to indicate if the
1177 problem is with read or append.
1179 kes Fix memory leak with storage ids in cats/sql_get.c
1180 kes Terminate watchdog earlier to avoid reference to released
1181 memory -- reported by Jason Austin.
1182 kes Move closing the database from jobq.c to the director daemon
1183 termination routine. This fixes memory leaks for shadow jobs
1184 (i.e. migration jobs).
1185 kes Free up the unique jobid chain items in migrate.c. This fixes
1186 a memory leak problem.
1187 kes Convert some ugly looking for statements to use foreach_alist
1188 in findlib/find.c. This will facilitate converting the structures
1189 to use dlist (for large include/exclude lists).
1190 kes Fix a bug in the btree.c and btree.h routines, then rename them
1191 rblist and add them to be built in src/lib. Include some new
1192 methods written by Rudolf Cejka that make the code more readable
1193 (hides some of the ugly casting).
1194 kes Add set_next() and set_prev() methods which make the code much more
1195 readable. Also add a new dlistString class that facilitates storing
1196 strings in dlists. To be used in the large include/exclude lists.
1197 kes Make some trivial modifications to lib/tree.h that use rblist
1198 rather than dlist for storing the tree links. This was suggested
1199 by Rudolf Cejka. The result of this is that the restore tree now
1200 uses red-black binary trees rather than simple linked lists. This
1201 should give rather dramatic speed improvements for directories
1202 contining large numbers of directories/files (more than 10000).
1204 kes Fix maxruntime bug #621.
1206 ebl Implement the include JobID in spool file name project.
1207 kes Reorder projects file in order determined by Jan 2007 vote.
1208 kes Implement item #12 on project list -- quick release of FD by
1210 kes Fix open of SQLite3 db where user does not have write permission
1211 so that DIR does not crash. Fixes bug #761.
1213 kes Add back missing @ in Win32 Makefile.
1214 kes Change 'Device not configured to autolabel' from INFO
1216 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1217 which should restart an indefinite # of times.
1218 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1219 other DIR specifications.
1221 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1222 Fix path quoting in SQLite scripts.
1223 Fix problems with SHGetFolderPath.
1225 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1227 kes Fix Job restart on error bug that promotes an Inc to a Full
1228 backup. This should fix bug #755.
1229 kes Add qt-console and first cut of code.
1233 kes Fix Bacula->Documentation link on Win32 to point to index.html
1234 instead of bacula.html. Fixed bug #750.
1235 kes Return JobId in db_get_job_record() when JobId==0. This should
1237 kes Do not release source pointers when restarting a failed job.
1239 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1240 This *should* fix bug #747.
1241 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1244 kes Modify USTORE constructor to set an empty store_source string,
1245 and don't copy the store_source string in a cancel. Hopefully
1246 this will fix Arno's seg fault, bug #744.
1247 kes Add back code to disable conio in configure. Fixes bug #743.
1248 kes Correct the Options scanner in the FD to correctly handle
1249 SHA1 option, which was eating the next option. Reported by
1251 kes Add code to indicate when the SD is spooling, spool wait, and
1252 despooling as requested by Alan Brown.
1254 Version 2.0.0 released: 4 January 2007