1 Technical notes on version 2.2
5 kes Fix --archivedir addition to configure. Replace it with
6 --with-archivedir in configure.in This fixes the regression
8 kes This patch fixes bug #1012 where the job is canceled because
9 of Max Run Time exceeded when the job has not yet started.
11 kes Correct typos in disk-changer.in
13 kes This patch fixes the status command to include the formating string for
14 JS_AttrInsterting. It fixes bug #1021.
15 kes This patch should fix the Mac OS X build problem on the latest
16 Darwin, where sys/types.h was not included correctly (apparently
17 due to a change in the Mac headers). The solution was to explicitly
18 ensure that it is defined for the ./configure.
19 This patch also has a rebuild of configure that includes the Debian
20 qt4 kludge (look for alternate qt4 names).
21 This patch fixes bug #1020.
22 kes This patch should ensure that queued messages to the console are
23 displayed as soon as possible. It should fix bug 1007, but has been
26 kes This patch fixes the infinite loop when trying to increase the
27 maximum number of volumes in a Pool during the add command.
28 This patch fixes bug #1008.
32 kes Get fix for joblist bug in bat from trunk.
34 kes This patch fixes bug #1003 where putting the message output from
35 a Verify job into the catalog results in a recursive loop. The problem
36 seems to show up only with postgresql (to be verified).
38 kes Fix bug #942 where lots of emails where generated when the heartbeat
39 interval was low and Bacula wanted a different tape from the one in
42 ebl Apply 2.2.5-lastwritten.patch to fix the LastWritten field
43 which was updated during a restore (or a reading migration) bug #982
45 ebl Use qmake-qt4 instead of qmake when available (debian system).
47 kes Add a security warning to src/cats/make_catalog_backup.in indicating
48 that passing the password via the command line (arg 3) is insecure.
49 This responds to bug #990 (it doesn't fix it).
50 kes Apply 2.2.5-postgresql-errors.patch
51 kes Remove unneeded File table index on JobId, which is already
52 present as the first index of another multi-index.
54 kes Set default debug_level to zero. This corrects bugs #991 and #993.
55 kes Fix a crash in bat when it cannot connect to the Director for example
56 if the Director is not running.
58 kes Activate Close button on tray-monitor window. This fixes
61 kes Fix spurious warning message printed when creating a volume with
62 a LabelFormat. This fixes bug #976.
66 kes Add JobId in place of Job name in all the Jmsg() output.
67 kes Correct the APP_DESC for the Win32 storage service (remove an e).
69 kes Add new SD despooling attributes and Dir inserting attributes
70 job status codes. This fixes bug #961.
71 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
73 kes Fix doc issue. This fixes bug #963.
74 kes Fix listing performance problems in bat. Pointed out by
76 ebl Fix replace on restore. This fixes bug #969
77 kes Fix bat code that tests for Win32. This should fix bug #968
78 kes Query 5 list wrong Vol after migration. This fixes bug #960
80 kes Correct lib/Makefile.in to include enh_fnmatch.o that was removed
81 in back porting from 2.3.x
83 kes Backport almost 4000 lines of 2.3 code that fixes a number of bugs.
84 The details are included in the notes in this file.
86 kes Backport 2.3 code that fixes: it fixes incorrect or incomplete error
87 messages; it fixes a problem opening the SQLite3 database when multiple
88 simultaneous jobs were running; it fixes a bug with certain versions of
89 MySQL where batch inserts failed because of table name character case
90 (upper/lower) differences.
91 kes Fix race condition that drops final block written to volume.
92 This happens in rare cases with multiple simultaneous jobs
93 when the Volume fills. This fixes bug #964. May be related
94 to bug #935 and possibly #903.
96 kes Fix FD->SD authorization failure, which was due to spurious
97 wakeups from a pthread_cond_timedwait(). Simply check the
98 predicate before continuing. This fixes bug #953
99 dvl Add new configuration item --archivedir
100 dvl Adjust regression tests to use tmp not /tmp. This will allow
101 multiple concurrent runs of the regression tests.
103 kes Eliminate more strerror() and replace with bstrerror().
104 kes Remove BSD getopt and replace with unrestricted IBM version.
105 kes Fix Win32 build for changed calling sequences.
107 kes Fix FD->SD authorization failure, which was due to spurious
108 wakeups from a pthread_cond_timedwait(). Simply check the
109 predicate before continuing. This fixes bug #953.
110 kes Add const char where needed (more to do).
112 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
113 kes Don't overwrite error message in check_tables_version.
115 kes Unlock batch insert tables with same calls used elsewhere.
116 kes Allow starting 59 jobs a second.
117 kes Make SD session key more random.
118 kes Add retry for SQLite opening db if it fails. Probably helps
120 kes Suppress extra error messages during batch insert failure.
122 kes Put some FD auth code on dbglvl rather than fixed.
123 kes Return insert attributes error message in db msg buffer to avoid
124 false error messages. Helps fix bug #966.
125 kes Separate batch init error messages. Probably helps fix bug #966.
126 kes If Dir gets an error during inserting attributes, cancel SD.
127 This reduces unnecessary error messages.
129 ebl Cleanup batch insert code. Probably fixes bug #965.
131 kes Turn off some code when batch insert not enabled.
132 kes Edit FD name in connect error messages.
134 kes Add code to handle tray monitor separated from Win32 FD.
135 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
137 kes Fix ANSI tape labeling. This fixes bug #954.
138 kes Increase the max block size to 4MB fixes bug #957.
139 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
140 is not properly mounted (recognized) during a poll.
141 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
142 Job that has differences reports Verify OK.
143 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
145 Release Version 2.2.4
147 kes Increase size of name string when FD making connection to SD.
150 kes Add waits to multiple exit detection code to try to force pid
151 file to always be deleted.
152 kes Restore good dev.tar.gz to rescue set appropriate binary property.
154 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
155 trying to switch drives by checking for blocking before unblocking.
157 kes Cancel storage daemon in all cases where FD reports error. This
158 should fix virtually all cases of bug #920.
160 kes Fix error message that was clobbered when Dir tells SD it does not
161 have write permission on Volume. This should fix a minor point
162 in bug #942, but not the main problem.
163 kes Add code to cancel job in SD if FD connection fails. This should
165 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
166 kes Fix migration code to get correct Volume name with multiple volumes
167 by skipping |. Fixes bug #936.
168 kes Implement patch supplied by Landon to fix bug #944 where using
169 TLS with bconsole uses 99+% of the CPU.
170 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
172 kes Move patches into patches directory.
174 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
177 ebl Using 'm' in bconsole will show messages like before,
178 and not memory usage.
180 Release Version 2.2.3
181 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
184 kes Fix bug #935, and probably also bug #903 where files were not
185 restored. MediaId was not properly set in JobMedia record after
188 kes Add ./configure search in qwt-qt4 for qwt package
189 kes Apply Martin Simmons patch that should turn off the new API usage
190 when batch insert is turned off allowing building on older
193 Release Version 2.2.2
195 ebl Detect if new PosgreSQL batch insert API is present.
196 kes Correct incorrect mempool call causing Director crash.
197 sb Update spec files for 2.2.1 release
199 Release Version 2.2.1
201 kes Update POTFILES.in
202 kes Cleanup a few underquoted AC_DEFUNs in configure
203 kes Apply patch from Martin Simmons that adds a test for va_copy to
206 kes Fix bug #921 by increasing the number of tries to create a new volume
208 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
209 can be called multiple times. Implement a version for machines
210 without va_copy() that gets a big buffer.
212 kes Integrate more portable zone offset code into bsmtp.c
213 Submitted by Attila Fülöp.
215 kes Fix bad SD->FD return status reported by
216 (James Harper) <james.harper@bendigoit.com.au>
217 ebl Fix a bug in read_close_session which return random status
218 thanks to James Harper
220 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
221 and directory names during restore of single file/directories.
222 kes Add sanity checks to .sql command when string is empty. Hopefully
223 that will resolve Dirks Director crash.
225 kes Apply patch submitted by Martin Simmons that corrects a seg fault
226 in the bsmtp chat subroutine when debug is >= 10.
228 kes Fix Director crash when running bat SQL queries.
229 kes Add David's notes on Item 8: Copy pools.
231 kes Rework projects file to be current and ready for a vote.
232 kes Enhance lex scanner error message.
234 kes Tweak LICENSE file to mention BSD code.
235 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
236 if specified on the ./configure.
237 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
238 This class is intended to allow us to open a second bsock to the
239 Director while in the restore subdialog.
241 kes Fix configure to create bat Makefile before creating dependencies.
242 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
243 kes Add a tooltip to the tray monitor.
244 dvl Set the Director's PID file before dropping privs. This fixes
247 kes Update AUTHORs file
248 kes Increase the default max concurrent jobs to 20 in FD and SD to
249 correspond with the default .conf files.
250 kes Rewrite the Win32 service routines. This eliminates the 3 copies
251 some different, of the same file created by RN when porting the
253 kes Rearrange some of the Win32 directories and the placement of the files
255 kes Set DEVELOPER flag in version.h
257 ========================================================================
258 Release Version 2.2.0
260 kes Apply a second doc patch from Marc.
261 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
262 improves the tips section that discusses how to setup multiple
265 kes Update bat README file.
266 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
267 corrects a typo in the Recycle status check in db_find_next_volume().
268 This will probably fix a number of annoying problems with multiple
270 kes Modify most of dird/msgchan.c to use bsock class calls rather than
271 bnet calls -- no functionality change.
273 kes Modify the Verify output to specify if files are missing on
274 the Volume(s) or disk. Fixes confusion in bug #916.
275 kes When more than one Volume is read in a migration job, the last
276 Volume bytes reported are from the last read volume rather than
277 the last written volume. Fixed. This fixes bug #910.
278 kes Fix display of Recycle flag after update volume=foo recycle=yes.
279 It previously printed New Recyle flag is: no. This fixes bug
282 kes Correct seg fault when switching tape drives during restore.
283 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
284 be used until after 2.2.0 release.
286 kes Remove fnmatch() in SD that permitted wild card specifications.
289 kes Fix %g in filename returned by SQL for browse tree reported by
291 kes Fix configure so that it puts config.out in the cwd rather than
293 kes Attempt to fix the locking problem reported by Eric in bug #906.
294 kes Make berrno class to leave errno unchanged after constructor call.
295 kes Make bnet_server use the heap rather than the stack to allocate
296 its socket fd pointers to avoid a crash at termination. Problem
297 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
299 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
300 and putting it in depkgs-qt along with Qt4.3.
302 kes Rework code in acquire.c that switches drives for reading when
303 the Media Type does not match. This should fix bug #906
305 ebl Fix a director segfault during job setup #907
306 kes Correct seg fault in postgresql when first operation returns no
307 rows. Fixes Dirks File browser problem seg fault with bat.
309 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
310 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
313 kes Implement PopUp YES/NO dialog for bat.
315 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
317 kes Correct RunScript to terminate job in FD on failure.
318 kes Change abort_on_error and AbortJobOnError to fail_on_error
319 and FailJobOnError in RunScripts.
320 kes Minor tweaks of code formating in RunScripts, principally to
321 avoid depassing 80 columns.
323 kes Eliminate one #ifdef Win32 in bsmtp
324 kes Implement grow tool to grow a file for testing very large databases.
325 kes Add big-vol-test to test Bacula seeking with > 5GB.
328 kes Modify find_next_volume() to return all values in Media record.
329 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
333 kes Update Release notes
335 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
336 Warning, in previous beta version, all media get from scratch keep their
339 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
340 This should fix bug #842. Made a note to look at removing the temp
341 files at the end of the install.
342 kes Add ability to mount and unmount a file device providing it is
343 marked as being removable and has the appropriate mount and unmount
344 commands defined in the Device resource. This fixes bug #830.
345 kes When applying a storage override, release all previous storage
346 definitions rather than just prepending the new storage.
347 This should prevent a good deal of confusion.
349 kes Implement ./configure search for qwt libraries.
351 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
352 Win32 FD. This should fix bug #893.
353 kes Remove an unnecessary beep in Win32 init code.
354 kes Update copyright dates in Win32 executable about boxes.
355 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
356 code with a BSD getopt.c and getopt.h.
357 kes Remove sched.h from the Win32 compat directory -- not used.
358 kes Remove the Exit menu item from the Win32 tray monitor. If you really
359 need to shut it down, do it through the services panel or the command
361 kes Remove some inappropriate Bacula FSFE copyrights.
362 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
363 kes Fix regress config non-portable test as pointed out by
364 Florian Heigl <florian.heigl@gmail.com>
365 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
366 as pointed out by Florian Heigl <florian.heigl@gmail.com>
368 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
369 Reported by Frank Sweetser.
373 kes Fix client-only build.
374 kes Integrate client-only fixes for bsys (initgroups) and conio from
375 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
376 kes Make arguments to get_scratch_volume() in same order as other
378 kes Rework the prune_volumes() subroutine so that after purging and
379 no volume found in desired pool, it will check for a scratch
380 volume. This prevents recycling the whole scratch pool.
381 kes Add code to status storage to print boffset_t (largefile support).
383 kes Move qwt (Graphics libarary for Qt4) to depkgs.
384 kes You now need a --with-qwt=<dir> to be able to build bat.
385 kes Update src/win32/cats/bacula_cats.def to include the new
386 db_get_query_dbids() call on Win32.
388 kes Correct a problem when selecting a scratch volume and moving
389 it to another pool that lost some columns.
390 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
391 kes Enhance Autochanger error messages to include Volume and device name.
392 kes Rework prune_volumes() code to take account of InChanger flag,
393 and to handle recycling volumes going to the Scratch pool and
394 current pool because the RecyclePool directive.
395 kes Implement a better and more efficient db_get_query_dbids() to
396 handle creating and passing back a list of DBIds.
400 kes Start work on new more efficient DBId subroutine. First use
401 will be for recycling volume to Scratch inchanger.
402 kes Increase number of JobIds in pruning from 1000 to 10000.
403 This to be replaced by above routine.
404 kes Begin implementation of building Qt4 on Win32.
405 kes Correct typo in fix I added for bad TLS shutdown.
406 kes Pull 2.0.3 patches into patches directory.
407 kes Update Release notes. Include qt-console in line count.
408 kes Update Projects file.
410 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
411 bug in migration code where a job that spanned two volumes
414 kes Implement new BST_DESPOOLING blocked state. Change from locking
415 during despooling in SD to blocking. This means that other threads
416 can work with the device structure, in particular the reservations
417 system while despooling.
419 kes Fix return in reservation message queue that missed clearing
420 the jcr lock (implemented 26Jun07 below).
421 kes Rename a number of dev methods to make locking function names
423 kes Document locking in lock.c. Move lock structures to new file
426 kes Move reservations message lock to lock jcr only this
428 kes Move main SD locking code into lock.c (new file).
429 kes Update Win32 build to include lock.c
433 kes Dirk committed the qwt library code for drawing graphs in bat.
434 kes Tweak install of qwt so that it is integrated with ./configure.
436 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
437 out by Eric (my typo).
438 ebl Fix configure.in to get batch mode enable
439 kes Return correct string from authenticate.cpp in bat when connecting
441 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
442 spurious line drops when using TLS.
443 kes Do not file reparse points when restoring a file that already
446 kes Implement Windows reparse points -- similar to directories, but
447 we do not descend into it. This is a first cut. They seem to
448 be backed up, but restore is not yet tested.
449 kes Remove restore_blocking in tls code when shutting a socket to leave
450 it in blocking mode. Hopefully this will fix the encryption bug
451 reported by Frank Sweetser.
452 kes When opening a file for backup, tell the OS that we are going to
453 read it sequentially -- optimization.
454 kes Change variable names in authenticate_director() to not conflict
455 with member names in bat. Caused great confusion with compiler,
458 kes Queue openssl error messages in case of comm problem.
459 kes Do shutdown() call if socket terminated.
460 kes Remove some duplicated code in tls.c
461 kes Move more of the bsock member variables into private and access
463 kes Add Frank Sweetser's tls-test to the regression suite.
465 kes Add Swedish sv.po file
467 kes Don't print clock skew message in FD if less than 3 seconds diff.
468 kes Add a bit of VSS info to status client.
469 kes Implement a first cut of Vista VSS, using Win2003 code.
473 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
474 loaded tape but uses first drive).
475 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
476 This was indeed a Win32 issue.
478 kes Simplify search of autochanger for in-use Volume.
479 kes Fix exit condition of check for in-use volume. kes Remove
480 inappropriate my_postgresql_free_result() in db_close()
482 kes Fix bad return in FD when encryption signature not found.
483 Probably caused a crash.
484 kes Inhibit missing encryption signature error messages for
485 file types where no signature computed.
486 kes Correct inverted check on autochanger in reservation system.
487 kes Tweak debug code in autochanger reservation.
489 kes Add some additional locking in the cats directory in subroutines
490 that modify packet variables called from batch insert.
491 kes Rework how dcrs are allocated. new_dcr() can now be called
492 with an existing pointer, and it will simply clean it up.
493 This allows the reservation system to test various different
494 devices, and will permit easy device changes.
495 kes A bunch of changes all over to handle new new_dcr() calling
497 kes Work more on the Volume management in the SD. Remember Volumes
498 for tape drives and for autochangers (even virtual disk changers).
499 kes When looking at the Volume list to reserve a drive, handle
500 autochanger names correctly by interating through the changer
501 devices. Also call the Director to see if a Volume is suitable
503 kes Fix some bugs in bscan. Make sure all media records are written.
504 Make sure that valid JobMedia records are written for disk files.
505 Previously they were completely wrong.
506 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
507 that the URLs don't change and so that the developers will all
508 work off the same copy. Rebuild from scrach.
509 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
513 kes Fix seg fault in FD from incorrect digest size.
514 kes Fix argument to non-OpenSSL crypto.c subroutine.
518 kes Remove a few malloc()s from the encryption code.
519 kes Use the class calls to bsock in filed/backup.c and restore.c in
520 place of the old bnet_xxx code.
521 kes Implement code that does an on the fly calculation of the
522 signing digest during restore of encrypted files. It makes
523 a best guess at the algorithm, and if it is not correct, will
524 then revert to the old code which reads the file after it is
526 kes Implement at least one missing crypto stream in stream_to_ascii()
527 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
528 #877 where a reload with bad syntax causes Dir to exit.
530 Cut: 2.1.14 beta (not released)
532 kes Do not free a volume on a tape drive until another volume is
533 mounted and read, or the autochanger unloads the volume.
534 This should help the SD re-use volumes that are already mounted,
535 and should fix bug #886.
536 kes Apply patch from user brettedgar that allows gnome2-console include
537 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
538 kes Apply patch from Lucien Weller that fixes day of week calculation
539 because of DST flag problem. Fixes bug #887.
541 kes Move find_next_appendable_volume() to after acquiring a valid device
542 in reserve.c. This fixes bug #864 -- confirmed by reporter.
544 kes Unable to reproduce bug 872. However added additional testing for
546 kes Bug #874 resolved by documenting SQLite limitations.
547 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
548 kes Bug #881 resolved by removing typo in mtx-changer script.
549 kes Made Frank Sweetser's wiki the official Bacula wiki with his
550 approval. Added a link to the wiki on the web page, and implemented
551 a backup from http://paramount.ind.wpi.edu
553 kes Fix update allfrompool to pass pool name.
555 kes Convert to pure GPL v2 license.
556 kes Fix sscanf problems reported by Peter Buschman that caused
557 a bus error on Solaris.
558 kes Rework (simplify) the select prompt in bat.
559 kes Move get_jobid_from_tid() into lib and create a
561 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
562 should definitely fix the problem of lost error messages in the
564 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
565 kes Eliminate tcpd.h from the project. Enclose the #include from the
566 library with extern C ...
567 kes Add print of signal name when a signal is trapped.
571 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
573 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
574 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
575 makes SQLit3 run 30 times faster, though a bit less safe.
576 kes Implement --with-batch-insert in configure and detection of thread
577 safe libraries. It is on by default, but turned off if no thread
578 safe library (e.g. SQLite 2) is available.
580 kes Fix Bacula PostgreSQL buffer overruns.
581 kes Do better checking for NULL results returned from PostgreSQL;
582 implement retry for failed queries; clear results buffer after
583 failed query. Hopefully this will correct the PostgreSQL failures.
585 kes Implement algorithm to handle only one appendable volume with
586 Prefer Mounted Volumes = no.
587 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
588 returned from a query.
589 kes Make volume lock recursive.
590 kes Implement an additional volume reservation algorithm that
591 starts by considering all reserved volumes then uses the
592 old brute force algorithm of searching the resources to
593 find a suitable device.
594 kes Add new reservations debug code and refine the old code.
595 kes Update the win32/dll/bacula.defs file.
597 kes Tweak reservations algorithm to permit a few more cases, i.e.
598 volume reserved, but on different drive, ...
599 kes Enhance SD status to include Pool and Media Type for drive in a
600 more readable format (a bit longer).
601 kes Fix PostgreSQL double free.
603 kes Minor refactoring of restore decryption code.
604 kes Add code to smartall.c to detect double free of a buffer.
606 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
607 so that bsmtp will create a correct email address (mailbox only).
608 kes Modify 'memory' command so that the buffers are listed as 'In use'
609 to avoid confusion with Orphaned buffers.
610 kes I reworked the OpenSSL include/lib flags to be handled in
611 the standard Bacula way, which should fix bug #863 concerning
612 non-standard OpenSSL libraries.
614 kes Implement Help Browser window for bat.
615 kes Fix reload bug that reset StorageId to zero.
617 kes Fix TLS #ifdefing when TLS turned off.
618 kes Ensure that when labelling a tape with Slot=0 that InChanger
620 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
622 kes Add StartTime to final uar_sel_jobid_temp query so that we can
623 add DISTINCT (required by PostgreSQL).
624 kes Implement BSOCK authenticate_director() method. Eventually will
625 authenicate all daemons.
626 kes Move several more functions into the BSOCK class.
628 kes Add code to tell the OS that we no longer need a cached
629 file that we were reading. In findlib/bfile.c. Also,
630 only cache files that we are reading. Thanks to
631 Tobias Oetiker <tobi@oetiker.ch> for the idea.
632 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
633 kes Implement script to automatically generate cats and dll .def
635 kes Update README.mingw32 to include new .def file generation.
636 kes Correct typo in UTF-8 error message as reported by:
637 jhernandez <julianhernandez@gmail.com>
638 kes Add additional sm_check() code on debug level 1.
639 kes Set default debug level to 1.
640 kes Trap SIGABRT in attempt to get traceback.
642 kes Reduce bat connect timeout from 30 to 15 seconds.
643 kes More restructuring and implementing BSOCK class in place of
645 kes Remove a few unnecessary malloc() tests in crypto code.
646 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
647 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
648 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
650 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
652 kes Fix Verify InitCatalog. The attributes were not pointing to the
653 correct saved location.
654 kes Implement message callback so that GUI is sure to get all
655 daemon messages. Currently displayed in a dialog in bat.
656 kes Ignore SIGUSR2 (Bacula timer) in bat.
657 kes Apply regress patch from bug #859 to allow regress to work
658 with Solaris compiler.
660 kes Begin adding TLS support to bat.
661 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
662 clean up lex.c and make it more readable.
664 kes Move more bnet functions into the BSOCK class.
665 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
666 kes Complete change of berrno strerror() method to bstrerror()
670 kes Cleanup incorrect email addresses in bsmtp.
671 kes Make bat display initial messages rather than discard them.
673 kes First cut of adding .mod to the run command.
674 kes Implement auto display of messages in bat.
675 kes Enhanced preferences to allow all Bacula output to be
678 kes Try to make bsmtp date routines more generic.
679 kes Fixed bug #856 autochanger documentation.
680 kes Rework bsmtp date editing for Win32. This fixes bug #854.
681 kes Add new cats entry point so Win32 builds.
683 kes Attempt to fix bsmtp date editing on OSes without %z editing.
685 kes Do better checking for the MySQL 64 bit libraries looking for both
686 .a and .so libraries.
687 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
688 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
689 kes Require the thread safe version of MySQL during configure. Thanks
690 to Andre Noll for pointing this out.
691 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
692 continuing in migration code.
693 kes Apply implementation of tray-monitor font derived from gnome-console
694 submitted by Andreas Piesk <a.piesk@gmx.net>
696 kes Eliminate important memory loss in SQLite
697 kes Fixed the batch insert MySQL thread specific data that was not
698 being freed. See cats/mysql.c:db_thread_cleanup().
699 kes Fix restore before command.
700 kes Convert old hdr.name to name() in a few places.
701 kes Implement update jobid command.
702 kes Return all time_t dates in db_get_job_record()
703 kes Stop watchdog in SD earlier.
704 kes Put Pool just after Storage in please mount message.
705 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
708 kes Update the po files.
709 kes Fix Verify InitCatalog by making it cache attributes.
711 kes Change name bacula-bat to bat for man 1 page to correspond to
713 kes Check for client and store NULL pointers in status command. This
715 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
716 kes Fix sign extended editing of %p.
717 kes Clean out a little old #ifdefing in cats/mysql.c
719 kes If time diff between DIR and FD is more than 600 seconds convert
720 INFO message to WARNING.
721 kes Implement heap size display in status for all daemons.
722 kes Attempt to fix MySQL db open memory loss (not successfull).
723 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
724 kes Eliminate memory loss in MySQL (possibly other SQLs) during
725 Query. This looks like a MySQL but but by doing extra releases,
726 the memory goes away. This should fix bug #847.
728 kes When backup fails, cancel SD before waiting for sd termination.
729 kes If SD is waiting for FD to connect during cancel, wake up the
731 kes Fix fsf code so that errno is correctly reported.
732 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
734 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
735 so that Bacula doesn't later stumble into a seg fault.
736 kes Use the term Restore Client in the restore Job report.
737 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
738 the original job's FileSetId.
739 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
740 spooling in migration jobs. Not yet tested.
741 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
742 reading conf file from a pipe. However, do it with open_bpipe()
743 rather than popen. Not yet tested.
745 kes Fix an ugly bug where the VolCatBytes were getting updated
747 kes Implement bconsole memory command that prints current memory
748 usage, plus smartalloc dump.
749 kes Clarify some error messages in backup, admin, and migrate.
750 kes Shrink label dialog to smaller size.
751 kes Invert Cancel OK buttons on restore to be OK Cancel.
752 kes More strerror() to bstrerror() conversions.
754 kes Start implementing bstrerror() in place of strerror().
755 kes Stripping path -- seems to work.
757 kes Prevent door and port files from being restored (mostly
759 kes Free an unreleased buffer in compat code.
760 kes Change console Job name from *Console* to -Console- to eliminate
761 Win32 filename problems. Put Win32 path separator when creating
762 Console file. This fixes bug #846.
763 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
765 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
767 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
768 to force Win32 error message.
770 kes First cut strip path. The data should be passed to the FD,
771 but nothing is done with it yet.
772 kes Enhance the digest and signature routines in the crypto
773 library to accept a JCR and to use it to print error messages
774 so that they will go in the Job report rather than the daemon's
776 kes Simplify some of the verify signature code.
777 kes Simplify a few of the alternative returns in the signature
780 ebl Use only POSIX regex instead of GNU regex in breg.c for
781 File relocation. It fix broken freebsd compilation.
782 kes Convert all other Dir files to use new ua class message
784 kes Tentative fix for missing digest signature in bug 807.
785 kes Correct handle problem in new win32_ftruncate routine.
786 kes Convert ua_purge.c and ua_update.c to use new ua class
787 message routines for bat.
789 kes Correct incorrect installation of LICENSE in Win32 installer.
790 kes Display LICENSE at the beginning of the Win32 install.
791 kes Attempt to correct the need for the png files to be installed
793 kes Reapply my bat.conf install script in qt-console. I think I
794 editted bat.pro instead of bat.pro.in and it was lost.
795 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
796 the /var/lock/subsys for subsysdir. Also corrects typos in the
799 kes First cut update job.
800 kes Correct configure to include qmake of src/qt-console directory.
802 kes Make restore job yes/mod/no print in one command so GUI works.
803 kes First cut implementing backup and restore client.
804 kes Correct editing in Verify output that caused a seg fault.
806 kes Insure that bat.conf is not overwritten during installation.
807 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
808 while I was implementing migration in March 2006 !
810 ebl Cleanup file relocation, using char *RegexWhere instead of
811 char *where + bool where_use_regexp
812 kes Update some manpages and add bat manpage.
813 kes Make a first cut at converting bacula.spec.in for bwx-console
815 kes Apply patch from John Goerzen to add hostname as fourth argument
816 to make_catalog_backup script.
817 kes Fix typos I introduced into bsmtp.c
818 kes Make pm_strxxx() routines handle input of NULL pointer. This
819 is to protect from NULL pointers returned from SQL databases.
820 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
821 kes Add more debug to FIFO code -- fix fifo regression test.
823 kes Implement posix_fadvise in FD, and for reading spool files in SD.
824 kes Add thread timer to bnet_connect() to break from OS if wait time
827 kes Update Win32 build to include new files, new symbols, and
829 kes Implement socket level heartbeat (tcp_keepidle)
830 ebl Commit File relocation patch
831 kes Make bat have 'make install' target.
832 kes Warn during install if old gnome-console binary found.
833 kes Warn during install if old wx-console binary found.
834 kes Add -8 option to bsmtp command line to add content type utf-8.
835 Fixes bug #809. (Character coding problem in bsmtp).
836 kes If < is found in target (from, to, cc) then do not enclose the
837 target in < > in bsmtp. Fixes bug #772 (malformed address).
838 kes When printing certain items in dbcheck, stop after 300000.
839 Fixes bug #822. (dbcheck loops).
840 kes Incorrect status in Dir after waiting for mount with poll set.
843 kes Extend idea of Prefer Mounted Volumes to mean a volume about
845 kes Print waiting to reserve a device every 5 mins.
847 kes Don't call close_part in label.c if tape and relabel.
848 kes Don't free volume if busy in close() -- should help with
850 ebl Fix #824 RunScript bug (After script could be execute twice)
851 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
852 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
853 Add a regression script to test RunScript
855 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
858 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
859 deprecated. No additional bugs will be fixed, and they will be dropped
860 in a future release (probably 2.4.0).
861 kes Change name of wx-console to bwx-console to make it more Bacula
863 kes Change the name of gnome-console to bgnome-console to make it
866 kes Some time in March, a Feature Request with patch from Jorj Bauer
867 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
869 The ability for the director to validate a Client (FD) CN against
870 an arbitrary set of patterns rather than the hostname, with
871 A new 'TLS Allowed CN' set of directives which are implemented
872 in the Client resource. Then pattern matching is used in place
873 of hostname matching against the Certificate's CN. As an example, we
874 have certificates which (a) use a local CA, and (b) have a CN of the
876 kes Add new/changed entry points to Win32 build
877 kes Create unaccepted-projects for projects that are not accepted.
878 kes Simplify locking in the reservations system.
879 kes Add more debug code in reservations.
880 kes Make sure error condition on reserving a volume is handled correctly.
881 kes Correct handling of volume_in_use.
882 kes Correct handling of initializing a device.
883 kes Move handling of broadcasting releasing a device into release_device().
884 kes Correct attaching dcr to dev so that it is only done if device
885 is properly initiated.
887 kes Locking debug level tweaks in SD.
888 kes Tweak new Volume code.
890 kes Add exec external-command [wait-seconds] to bconsole. This
891 executes the external-command. Note! normally external-command
892 should be enclosed in double quotes.
893 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
894 it should normally be off in a production system.
896 kes Implement die command for SD so that we can force it to dump.
897 kes Implement SD lock debug code.
898 kes Implement new algorithm for keeping Volume list in SD. It
899 is now owned by the device.
901 kes Implement new code for freeing in use volumes that should
902 resolve if not all, some of the problems of multiple drive
903 tape conflicts described in bug 801.
905 kes Fix gui/bacula-web/images files in svn.
906 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
908 ebl Fix a bug in batch mode (in string escape)
909 kes Correct migration prune SQL typo that crept in in a
912 kes Move bnet_despool() into class in bsock.c
913 kes Modify job report to include director name and Build OS.
914 kes Move drop root privilege and check_catalog() before fork.
915 kes Add update database scripts (version 9 to 10) to updatedb directory.
917 ebl Check size and age of each file after its backup to see if
918 it has changed during backup, if 'checkfilechanges' is set.
919 The FD will do an extra check (stat(2)) after
920 each file backup. mtime, ctime and size are compared with
921 'before backup' information. If time or size mismatch, an
922 error message will be generated. You must upgrade FD to use it.
924 kes Make database name and user configurable
925 --with-db-name=xxx --with-db-user=xxx
926 kes Add back database type to message.c for debugging.
928 kes Implement dir_sql() which issues an SQL query.
929 kes Modify bat medialist to use dir_sql() and do some minor C++
930 formatting as well as eliminating a number of pointers, simplifing
933 kes Fix some of the mtx-changer grep commands for tape label readers.
934 kes Convert a number of bsendmsg into the appropriate send/warning/error
936 kes Suppress the using database message in the .sql command.
937 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
939 kes Add context menu for floating a window.
940 kes Some minor cleanup and name changes in qt-console
941 kes Add doing mt setblk 0 in Win32 mtx-changer.
942 kes Apply Martin's bug fix to move definition of ENODATA for
944 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
947 kes More pruning cleanup.
948 kes Turn on wait_for_drive by default in mtx-changer.
949 kes Turn on Batch insert code by default as it now passes regression.
950 kes Add ./configure --enable-bat to enable building of Bat.
951 No install yet though.
953 kes Implement a new .sql command for bat.
954 kes Implement code to turn off pruning in obtaining the next volume.
955 Pruning is turned off for the status dir command, but turned on
956 for SD requests and for the list nextvolume command.
958 kes Correct Qmsg() that was not updated correctly when committing a
959 previous change (probably the recent TLS patch).
961 kes Write new subroutine is_volume_purged() that explicitly checks
962 if the Volume is purged, and if so marks it as such. This should
963 resolve problems reported about needing to mount twice to recycle
965 kes Rewrite pruning algorithm to do more work in the SQL engine, and
966 to pass a list of JobIds to be deleted to SQL. Also, minimize the
967 amount of duplicated code.
968 kes Do volume pruning only for the Media Type desired (reduces pruning time
969 if multiple Media Types are in the same pool).
970 kes Implement more detailed info in the Job report for the Bacula version
972 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
974 ebl Add bbatch tool to bench database and insert mode.
975 Fix sql quote stuff in batch mode
976 Fix sql stuff for mysql
978 kes Correct problems with am/pm scheduling. Fixes bug #808.
979 kes Implement new prunning code that prunes up to 1000 jobs at
980 the same time. The same technique can be applied to a number
981 of other prune/purge subroutines.
982 kes Add an insanity check when starting a new tape job to ensure
983 that the tape position has not been changed. If so fail the
985 kes Fix Win32 build for dlls to add the folllowing:
986 src/lib/bsock.c -- new file with new entry points
987 src/lib/dlist.c -- new entry points
988 src/cats/sql_create.c -- new entry point
989 src/cats/sql_cmds.c -- new DATA item exported
991 ebl batch mode cleanup bscan-test is ok now.
992 kes Implement SD code to check length of disk volume before appending.
994 kes Correct return status on db_batch... routines.
995 kes Add call to db_write_batch_file_records() to migration code.
996 ebl Fix AfterJob timing
997 kes Move the checking of the database in initializion of the Director
998 to after we drop privileges. This avoids the need for both root
999 and bacula access to the DB.
1000 kes Correct a misplaced variable definition in src/filed/backup.c
1001 kes Correct how the new batch insert db_create_attributes_record()
1002 uses the arguments. Caused a seg fault in bscan.
1003 kes Implement lock() and unlock() methods in DEVICE class.
1004 Implement block() and set_block(xx) methods in DEVICE class.
1005 kes Modify bnet_connect() so that it uses time() to check for the
1006 wait time expiring (on some OSes, some system calls may not
1007 return immediately).
1008 kes Modify Verify to obtain the previous JobId when it is actually
1009 running rather than at schedule time (as it was in 1.38.x).
1010 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1012 kes When checking pid in pid file, continue running if the pid is
1013 the same as ours. This occurs on IRIX after a system crash.
1016 kes Extend new GUI API.
1017 kes Make the ua structure a class, and implement send_msg(),
1018 error_msg(), warning_msg(), and info_msg().
1020 kes Apply fix from for building wx-console on the Mac from
1022 kes Implement new select mechanism for GUI programs.
1023 kes Reorganize initialization of stackedWidgets in bat.
1025 kes Add updated nagios plugin supplied by Christian Masopust.
1027 kes More bat implementation.
1028 kes File migrate bug with Pool Occupancy using mediaid instead
1029 of jobids. Fixes bug #795.
1030 kes Fix orphaned buffers in filed backup and verify due to
1031 crypto buffers not freed during errors. Fixes bug #789.
1032 kes Extend new GUI api code to tree commands.
1033 kes Ensure that tree and dot commands check console ACLs.
1034 kes Permit marking directory with trailing slash.
1035 kes Allow 20 console connections (instead of only 10).
1037 kes Add smartctl call to bacula-sd.conf as an example of getting
1040 kes Modify jobq.c to let simultaneous restore jobs run. This may
1041 cause them to fail if they cannot get a drive.
1042 kes Add Client Connect Wait to Storage daemon to permit users to
1043 modify the time the SD waits for a FD connection.
1045 kes Correct virtual changer check which was backwards. This caused
1046 volumes to be unloaded into slots already occupied.
1048 kes Apply Command ACL filter to JobId list in restore command.
1049 kes Correct typeo in var.c patch.
1051 kes Don't let Bacula prune File or Job records for the current Job.
1052 kes Fix variable substitution pad + inc bug reported (with patch)
1055 kes Correct SQLite log table index as reported by Luca Berra.
1057 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1059 kes Begin implementing new comm signals for API.
1060 kes Fix a few places in lib/message.c where the open fd may
1062 kes Continue implementing lib/bsock.c (real class). Make jcr,
1063 who, host, and port private. There are new methods to access
1064 them for non-class use. This required touching a number of files.
1066 kes Add LANG=C to autoconf/randpass so it works with languages other
1067 than English. Fixes bug #788.
1069 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1071 You will not be able to generate Include/Exclude list any more.
1072 It will be fixed soon.
1073 If you want to use this, you can apply
1074 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1076 kes Restore of sockets created false error messages because Bacula
1077 no longer restores sockets, but the code was still trying to
1078 set the attributes on a non-existent file. Reported by a user.
1079 ebl finish RecyclePool feature
1080 Media will takes Pool.RecyclePool
1081 when moving from Scratch to a Pool or when user will do
1082 update volume=xxx frompool
1083 To use it, add RecyclePool = aPool to your Pool resource
1086 RecyclePool = Scratch
1090 kes Expand new BSOCK class adding signal() and new BNET signals.
1091 kes Begin enhancing the dot commands adding a new API function
1092 that returns more information and will make it easier
1093 to interface to the Director from a program.
1095 kes Make DEVICE fd private. Its new name is m_fd, and can be
1096 obtained with dev->fd() outside the class. This is the
1097 first of many DEVICE members to be made private.
1098 kes Implement Michael Renner's idea on having a virtual disk
1099 changer. I made some minor modifications (e.g. I did not
1100 implement the Virtual Changer directive, but simply set
1101 the Changer Command to an empty string.
1103 kes Implement a BSOCK send() method that writes the whole record
1104 in a single write() request rather than in two.
1105 ebl add update volume=xxx recyclepool=yyyy
1106 volume takes recyclepool from pool when using update volume=xxx from pool
1108 kes Fix encryption deblocking bug, which caused some restored files
1109 to be truncated. This fixes bug #763.
1110 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1111 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1113 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1114 ebl Use btime_t instead of uint64_t in media patch.
1116 kes Optimize the use of the database a bit in the Status dir command.
1117 Only open it when needed, ensure that if any previous database
1118 was opened, it is closed.
1120 kes Correct VolCatBytes bug from media patch.
1121 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1122 in the case of orphaned records.
1123 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1124 and File records in 300K chunks to be more efficient. This
1125 idea came from Juan Luis Frances (if I remember right).
1126 kes Apply Eric's scratch patch that moves a purged Volume to
1127 the RecyclePool. Question: how is RecyclePool set? what
1128 happens to the ScratchPool?
1129 kes Apply Eric's media patch that collects read/write media
1130 times as well as byte counts. This patch requires a
1131 simultaneous upgrade of the DIR and SD. Note, there
1132 should be some way to turn off timing. I'm not sure
1133 times are in Bacula units.
1134 kes Apply Eric's batch-insert patch.
1136 kes Update projects list.
1138 kes Implement Include/Exclude file lists in FD as dlists using
1139 the new dlistString class. This permits efficiently having
1140 large include/exclude lists and completes project Item 25.
1141 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1142 console is authorized to cancel the job. This fixes bug
1144 kes Modify SD so that the VolCatJobs medium record is updated
1145 at the beginning of a Job rather than the end. This
1146 fixes bug #775 where exceeding MaxVolJobs caused jobs
1148 kes Added a mutex around getting and setting Volume information
1149 so that multiple simultaneous jobs will single thread.
1151 Switch to using Subversion
1152 kes Remove src/pygtk-console/ from configure
1154 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1155 plus the entrypoints.
1156 kes Apply patch supplied that corrects debug print
1157 in canceling jobs for max run time. Supplied as
1158 part of bug #621, which was previously fixed.
1160 kes Test on job_canceled() and sd_msg_thread_done inside
1161 loop starting the message thread to avoid a race condition.
1163 kes Remove rl_catch_signal from console.c as it conflicted
1164 with the header definition. Fixes bug #765.
1165 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1167 kes Clarify some stored/acquire messages to indicate if the
1168 problem is with read or append.
1170 kes Fix memory leak with storage ids in cats/sql_get.c
1171 kes Terminate watchdog earlier to avoid reference to released
1172 memory -- reported by Jason Austin.
1173 kes Move closing the database from jobq.c to the director daemon
1174 termination routine. This fixes memory leaks for shadow jobs
1175 (i.e. migration jobs).
1176 kes Free up the unique jobid chain items in migrate.c. This fixes
1177 a memory leak problem.
1178 kes Convert some ugly looking for statements to use foreach_alist
1179 in findlib/find.c. This will facilitate converting the structures
1180 to use dlist (for large include/exclude lists).
1181 kes Fix a bug in the btree.c and btree.h routines, then rename them
1182 rblist and add them to be built in src/lib. Include some new
1183 methods written by Rudolf Cejka that make the code more readable
1184 (hides some of the ugly casting).
1185 kes Add set_next() and set_prev() methods which make the code much more
1186 readable. Also add a new dlistString class that facilitates storing
1187 strings in dlists. To be used in the large include/exclude lists.
1188 kes Make some trivial modifications to lib/tree.h that use rblist
1189 rather than dlist for storing the tree links. This was suggested
1190 by Rudolf Cejka. The result of this is that the restore tree now
1191 uses red-black binary trees rather than simple linked lists. This
1192 should give rather dramatic speed improvements for directories
1193 contining large numbers of directories/files (more than 10000).
1195 kes Fix maxruntime bug #621.
1197 ebl Implement the include JobID in spool file name project.
1198 kes Reorder projects file in order determined by Jan 2007 vote.
1199 kes Implement item #12 on project list -- quick release of FD by
1201 kes Fix open of SQLite3 db where user does not have write permission
1202 so that DIR does not crash. Fixes bug #761.
1204 kes Add back missing @ in Win32 Makefile.
1205 kes Change 'Device not configured to autolabel' from INFO
1207 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1208 which should restart an indefinite # of times.
1209 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1210 other DIR specifications.
1212 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1213 Fix path quoting in SQLite scripts.
1214 Fix problems with SHGetFolderPath.
1216 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1218 kes Fix Job restart on error bug that promotes an Inc to a Full
1219 backup. This should fix bug #755.
1220 kes Add qt-console and first cut of code.
1224 kes Fix Bacula->Documentation link on Win32 to point to index.html
1225 instead of bacula.html. Fixed bug #750.
1226 kes Return JobId in db_get_job_record() when JobId==0. This should
1228 kes Do not release source pointers when restarting a failed job.
1230 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1231 This *should* fix bug #747.
1232 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1235 kes Modify USTORE constructor to set an empty store_source string,
1236 and don't copy the store_source string in a cancel. Hopefully
1237 this will fix Arno's seg fault, bug #744.
1238 kes Add back code to disable conio in configure. Fixes bug #743.
1239 kes Correct the Options scanner in the FD to correctly handle
1240 SHA1 option, which was eating the next option. Reported by
1242 kes Add code to indicate when the SD is spooling, spool wait, and
1243 despooling as requested by Alan Brown.
1245 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob