1 Technical notes on version 2.2
5 kes Prevent a Volume that is being swapped from being freed from
6 the volume list. This will most likely fix, at least partially,
8 kes Fix strippath so that it does not get a buffer overrun and crash FD.
10 kes Make inability to change owner/group when creating a dir only a
11 warning rather than an error.
13 ebl Fix SQL query in migration code
15 kes Force unload of volume when wrong volume mounted in SD.
17 kes Fix bat seg fault at termination.
18 kes Add Bacula generated version to bat about box.
20 Beta Release Version 2.2.10-b1
22 kes Permit multiple simultaneous restores -- experiment.
24 kes Backport development stream SD reservation system changes.
28 kes Move final volume swapping code to DCR method and
29 call it from acquire_for_read().
30 kes When wrong volume is mounted during read, unload_autochanger.
32 kes Stop searching for Volumes in SD askdir if DIR returns the
33 same volume name twice in a row.
35 kes Tweak the swap Volume from one drive to another code so that
37 kes Resolve several problems with recycling that broke the new
38 code (these problems are in 2.2.9 as well).
39 kes Remove the volume lock when calling the sysop code.
40 kes Don't mark a reserved volume with no writers as unused otherwise
43 kes Rework class structures for VOLRES, DCR, and DEVICE to make
44 the method names a bit more logical, and for more logically
45 handling the responsibilities.
47 kes Remove redundant code in terminating the scheduler that just
48 causes a seg fault in many cases.
49 kes Cleanup releasing a volume and make it a DCR method.
50 kes Improve algorithm for detecting pre-reserved volume and
53 kes Tweak volume swapping code so it works.
54 kes Correct name overloading in mount.c
55 kes Replace released flag in VOLRES with reserved and add access
56 methods for the VOLRES class.
57 kes Prevent volume from being released while being swapped.
58 kes Refactor parts of stored/mount.c
60 ebl Add sanity checks for VolWriteTime and VolReadTime
61 ebl Take care of bad clock changes while computing VolWriteTime
62 and VolReadTime. This should fix or limit #1066
63 kes Correct error string numbers in dird/catreq.c
64 kes Restructure reserving, acquiring, and mounting volumes. Calls to
65 autochanger are deferred for mount.c -- simplifes the code.
67 kes Do not prune any running job. It just fails the job.
68 kes Lock the volumes when changing dev->reserved_device and marking
69 the volume unused otherwise the device can get reserved by
70 another job before the volume is released, thus blocking it.
73 Beta Release Version 2.2.9-b7
75 kes Close bat console windows first to eliminate error message
77 kes Remove useless code in Scheduler that causes seg fault on
79 kes Correct some SD catalog request error messages.
80 kes Don't allow pruning of any running job.
81 kes Turn off code in read_record that causes a seg fault in the SD
82 when reading past an EOS_LABEL.
83 kes Turn off unloading the autochanger in reserve.c as it just
85 kes Lock volumes when unreserving a device.
86 kes Do not mark volume unused when recycling.
87 kes When acquiring, don't mark volume unused if it is reserved (busy).
89 Beta Release Version 2.2.9-b6
91 kes Eliminate ./configure warning on po directory
92 kes Fix bug #1063, reuse of freed ptr in list nextvol.
93 kes Release regex compile buffer in filed/job.c
94 kes Add proper type of const char in sql_create.c
95 kes Turn off debug in daemon termination routines
96 kes Move free_volume_list() before devices are freed in stored.c
97 kes Fix reference to uninitalized stack variables in bregex.c.
98 This should correct bug #1067.
100 kes Fix possible seg fault in SD when freeing a volume entry.
102 kes Apply patch from bug #1069 that corrects spurious error messages
103 when ACLs enabled on SGI but no ACL exists.
104 ebl Fix a storage deamon segfault at debug level 500.
106 Beta Release Version 2.2.9-b5 -- not released
108 Beta Release Version 2.2.9-b4
110 kes Re-enable code to remember last volume mounted on a non-tape
112 kes Add patch supplied in bug #1068 that fixes a SD crash when using
113 a Virtual autochanger.
114 kes Generate correct JobMedia records during spooling/despooling when
115 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
116 <tih@hamartun.priv.no> for excellent analysis and testing.
118 Beta release Version 2.2.9-b3
120 kes Rework certain SD locking based on gdb tracebacks of deadlocks
121 sent by Eric. This code now uses only the volume_lock() rather
122 than the reservations lock when at EOM and acquiring a new
124 kes Ensure only one exit point in several subroutines.
126 Beta release version 2.2.9-b2
128 kes Fix to initial tape drive open to release the volume name
130 Beta release Version 2.2.9-b1
132 kes Fix to JobMedia fix.
133 kes Fix bug pointed out by Peter Much that causes the StorageId to
134 be updated when reading a tape (during migration, it could have
135 been incorrectly set to the write StorageId).
137 kes Implement autostart scripts for Debian
139 kes Fix mtx-changer.in for broken Debian mt program.
141 kes Massive commit of all fixes and back ports to create 2.2.9
143 kes Apply doc fix from bug #1062.
144 kes Resolve crash and improper restore wx-console Win32 restore
145 GUI. Fixes bug #1065.
146 kes Update Win32 wxWidgets to latest version.
147 kes Attempt to do correct handling of Win32 mount points. Should
149 kes Fix Win32 FD backup/restore memory leak due to improper termination
150 of BackupRead/Write. This fixes bug# 1038.
151 kes Add const to AIX prototype for initgroups()
153 kes Undo bug #1047 heap overrun fix as it is not correct.
155 kes Fix creating first JobMedia record during Migration to include
156 proper index. This caused slow restores of migrated jobs.
158 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
159 and do not strip paths on symbolic links.
160 kes Set catalog backup database and user name from values specified on
161 the ./configure line.
162 ebl Apply patch to correct bug #1031, about wrong pool source information
165 Release Version 2.2.8
167 kes Apply patch from Martin to correct bug #1040, bscan sets existing
169 kes Fixed important spelling error in doc -- bug #1045.
171 kes Move initialization of read/write res lock earlier in the code.
172 This fixes the crash with a null conf file. This fixes bug
174 kes Redefine CURES in lib/parse_conf to be URES and move it all
175 into lib/parse_conf.c -- this responds to bug #1042, but does
176 not fix it. The fix is not to compile with FORTIFY_SOURCE.
177 kes Backport fix de-referencing a NULL pointer in the scanner from
178 the trunk SVN. I don't think this was reported as a bug.
180 Beta release Version 2.2.8
182 kes Re-enable the new job code editing (%f).
184 kes Fix bsnprintf for float point numbers. I broke recently when
185 parameterizing some variables. This fixes bug #1036.
187 kes Move Heartbeat documentation from Job to Director resource.
188 This fixes bug #1033.
190 kes Fix existing switch drive SD code to call autochanger to release
191 any old volume. This must be done to keep the autochanger from
192 releasing subsequently newly reserved volumes in doing a close().
193 This should possibly fix bugs #1032 and #1018.
194 kes Apply big backport of current SVN SD code that corrects a number
195 of race conditions. This is a first step in fixing bug #1018.
197 ebl Fixes bug #1028 where "Selection Type" option was not usable
201 Release Version 2.2.7
203 kes Partial back out (disabled) %f job code editing because it
204 does not build on Win32.
205 kes Fix seg fault Frank Sweetser reports in regression testing
206 on his systems. The problem was that the original author of
207 bsnprintf.c did not take into account the side effects of
208 using ++x in the argument to a #define.
210 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
211 that implements double quoting include names in conf files,
212 and also allows piping input by having the first character
213 be a vertical bar (|).
214 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
215 that implement %f in RunScripts to pass the FileSet name.
216 kes Skip leading | when lex input comes from a pipe as suggested
217 by Michael Stapelberg <michael@stapelberg.de>.
219 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
220 Nerijus Baliunas <nerijus@users.sourceforge.net>
222 kes This patch corrects a problem where the maximum concurrent storage
223 jobs counter gets out of sync during restore jobs causing jobs to
224 'wait on max Storage jobs'. This patch fixes bug #1009.
226 kes Add new include to postgresql.c suggested by Marc Cousins so
227 that it compiles correctly with pgre version 8.3. Also fix
228 misuse of %x with pointer (should be %p).
230 kes This patch fixes bcopy so that it produces correct Volumes.
232 kes This patch eliminates spurious output to the console during a VerifyVolume
233 job that contains encrypted data. It fixes bug #1024.
235 kes This patch prevents the 'status dir' command from trying to use a scratch
236 volume and possibly moving it from one pool to another. This patch fixes
239 kes Fix --archivedir addition to configure. Replace it with
240 --with-archivedir in configure.in This fixes the regression
242 kes This patch fixes bug #1012 where the job is canceled because
243 of Max Run Time exceeded when the job has not yet started.
245 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
246 one 'part' to write. Instead of each part being stored on disk,
247 written to DVD, then deleted from disk, all parts are written to disk,
248 and only the last is written and deleted from disk.
250 kes Correct typos in disk-changer.in
252 kes This patch fixes the status command to include the formating string for
253 JS_AttrInserting. It fixes bug #1021.
254 kes This patch should fix the Mac OS X build problem on the latest
255 Darwin, where sys/types.h was not included correctly (apparently
256 due to a change in the Mac headers). The solution was to explicitly
257 ensure that it is defined for the ./configure.
258 This patch also has a rebuild of configure that includes the Debian
259 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
260 kes This patch should ensure that queued messages to the console are
261 displayed as soon as possible. It should fix bug #1007, but has been
262 reported not to work.
264 kes This patch fixes the infinite loop when trying to increase the
265 maximum number of volumes in a Pool during the add command.
266 This patch fixes bug #1008.
268 Release Version 2.2.6
270 kes Get fix for joblist bug in bat from trunk.
272 kes This patch fixes bug #1003 where putting the message output from
273 a Verify job into the catalog results in a recursive loop. The problem
274 seems to show up only with postgresql (to be verified).
276 kes Fix bug #942 where lots of emails where generated when the heartbeat
277 interval was low and Bacula wanted a different tape from the one in
280 ebl Apply 2.2.5-lastwritten.patch to fix the LastWritten field
281 which was updated during a restore (or a reading migration) bug #982
283 ebl Use qmake-qt4 instead of qmake when available (debian system).
285 kes Add a security warning to src/cats/make_catalog_backup.in indicating
286 that passing the password via the command line (arg 3) is insecure.
287 This responds to bug #990 (it doesn't fix it).
288 kes Apply 2.2.5-postgresql-errors.patch
289 kes Remove unneeded File table index on JobId, which is already
290 present as the first index of another multi-index.
292 kes Set default debug_level to zero. This corrects bugs #991 and #993.
293 kes Fix a crash in bat when it cannot connect to the Director for example
294 if the Director is not running.
296 kes Activate Close button on tray-monitor window. This fixes
299 kes Fix spurious warning message printed when creating a volume with
300 a LabelFormat. This fixes bug #976.
302 Release Version 2.2.5
304 kes Add JobId in place of Job name in all the Jmsg() output.
305 kes Correct the APP_DESC for the Win32 storage service (remove an e).
307 kes Add new SD despooling attributes and Dir inserting attributes
308 job status codes. This fixes bug #961.
309 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
311 kes Fix doc issue. This fixes bug #963.
312 kes Fix listing performance problems in bat. Pointed out by
314 ebl Fix replace on restore. This fixes bug #969
315 kes Fix bat code that tests for Win32. This should fix bug #968
316 kes Query 5 list wrong Vol after migration. This fixes bug #960
318 kes Correct lib/Makefile.in to include enh_fnmatch.o that was removed
319 in back porting from 2.3.x
321 kes Backport almost 4000 lines of 2.3 code that fixes a number of bugs.
322 The details are included in the notes in this file.
324 kes Backport 2.3 code that fixes: it fixes incorrect or incomplete error
325 messages; it fixes a problem opening the SQLite3 database when multiple
326 simultaneous jobs were running; it fixes a bug with certain versions of
327 MySQL where batch inserts failed because of table name character case
328 (upper/lower) differences.
329 kes Fix race condition that drops final block written to volume.
330 This happens in rare cases with multiple simultaneous jobs
331 when the Volume fills. This fixes bug #964. May be related
332 to bug #935 and possibly #903.
334 kes Fix FD->SD authorization failure, which was due to spurious
335 wakeups from a pthread_cond_timedwait(). Simply check the
336 predicate before continuing. This fixes bug #953
337 dvl Add new configuration item --archivedir
338 dvl Adjust regression tests to use tmp not /tmp. This will allow
339 multiple concurrent runs of the regression tests.
341 kes Eliminate more strerror() and replace with bstrerror().
342 kes Remove BSD getopt and replace with unrestricted IBM version.
343 kes Fix Win32 build for changed calling sequences.
345 kes Fix FD->SD authorization failure, which was due to spurious
346 wakeups from a pthread_cond_timedwait(). Simply check the
347 predicate before continuing. This fixes bug #953.
348 kes Add const char where needed (more to do).
350 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
351 kes Don't overwrite error message in check_tables_version.
353 kes Unlock batch insert tables with same calls used elsewhere.
354 kes Allow starting 59 jobs a second.
355 kes Make SD session key more random.
356 kes Add retry for SQLite opening db if it fails. Probably helps
358 kes Suppress extra error messages during batch insert failure.
360 kes Put some FD auth code on dbglvl rather than fixed.
361 kes Return insert attributes error message in db msg buffer to avoid
362 false error messages. Helps fix bug #966.
363 kes Separate batch init error messages. Probably helps fix bug #966.
364 kes If Dir gets an error during inserting attributes, cancel SD.
365 This reduces unnecessary error messages.
367 ebl Cleanup batch insert code. Probably fixes bug #965.
369 kes Turn off some code when batch insert not enabled.
370 kes Edit FD name in connect error messages.
372 kes Add code to handle tray monitor separated from Win32 FD.
373 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
375 kes Fix ANSI tape labeling. This fixes bug #954.
376 kes Increase the max block size to 4MB fixes bug #957.
377 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
378 is not properly mounted (recognized) during a poll.
379 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
380 Job that has differences reports Verify OK.
381 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
383 Release Version 2.2.4
385 kes Increase size of name string when FD making connection to SD.
388 kes Add waits to multiple exit detection code to try to force pid
389 file to always be deleted.
390 kes Restore good dev.tar.gz to rescue set appropriate binary property.
392 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
393 trying to switch drives by checking for blocking before unblocking.
395 kes Cancel storage daemon in all cases where FD reports error. This
396 should fix virtually all cases of bug #920.
398 kes Fix error message that was clobbered when Dir tells SD it does not
399 have write permission on Volume. This should fix a minor point
400 in bug #942, but not the main problem.
401 kes Add code to cancel job in SD if FD connection fails. This should
403 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
404 kes Fix migration code to get correct Volume name with multiple volumes
405 by skipping |. Fixes bug #936.
406 kes Implement patch supplied by Landon to fix bug #944 where using
407 TLS with bconsole uses 99+% of the CPU.
408 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
410 kes Move patches into patches directory.
412 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
415 ebl Using 'm' in bconsole will show messages like before,
416 and not memory usage.
418 Release Version 2.2.3
419 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
422 kes Fix bug #935, and probably also bug #903 where files were not
423 restored. MediaId was not properly set in JobMedia record after
426 kes Add ./configure search in qwt-qt4 for qwt package
427 kes Apply Martin Simmons patch that should turn off the new API usage
428 when batch insert is turned off allowing building on older
431 Release Version 2.2.2
433 ebl Detect if new PosgreSQL batch insert API is present.
434 kes Correct incorrect mempool call causing Director crash.
435 sb Update spec files for 2.2.1 release
437 Release Version 2.2.1
439 kes Update POTFILES.in
440 kes Cleanup a few underquoted AC_DEFUNs in configure
441 kes Apply patch from Martin Simmons that adds a test for va_copy to
444 kes Fix bug #921 by increasing the number of tries to create a new volume
446 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
447 can be called multiple times. Implement a version for machines
448 without va_copy() that gets a big buffer.
450 kes Integrate more portable zone offset code into bsmtp.c
451 Submitted by Attila Fülöp.
453 kes Fix bad SD->FD return status reported by
454 (James Harper) <james.harper@bendigoit.com.au>
455 ebl Fix a bug in read_close_session which return random status
456 thanks to James Harper
458 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
459 and directory names during restore of single file/directories.
460 kes Add sanity checks to .sql command when string is empty. Hopefully
461 that will resolve Dirks Director crash.
463 kes Apply patch submitted by Martin Simmons that corrects a seg fault
464 in the bsmtp chat subroutine when debug is >= 10.
466 kes Fix Director crash when running bat SQL queries.
467 kes Add David's notes on Item 8: Copy pools.
469 kes Rework projects file to be current and ready for a vote.
470 kes Enhance lex scanner error message.
472 kes Tweak LICENSE file to mention BSD code.
473 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
474 if specified on the ./configure.
475 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
476 This class is intended to allow us to open a second bsock to the
477 Director while in the restore subdialog.
479 kes Fix configure to create bat Makefile before creating dependencies.
480 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
481 kes Add a tooltip to the tray monitor.
482 dvl Set the Director's PID file before dropping privs. This fixes
485 kes Update AUTHORs file
486 kes Increase the default max concurrent jobs to 20 in FD and SD to
487 correspond with the default .conf files.
488 kes Rewrite the Win32 service routines. This eliminates the 3 copies
489 some different, of the same file created by RN when porting the
491 kes Rearrange some of the Win32 directories and the placement of the files
493 kes Set DEVELOPER flag in version.h
495 ========================================================================
496 Release Version 2.2.0
498 kes Apply a second doc patch from Marc.
499 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
500 improves the tips section that discusses how to setup multiple
503 kes Update bat README file.
504 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
505 corrects a typo in the Recycle status check in db_find_next_volume().
506 This will probably fix a number of annoying problems with multiple
508 kes Modify most of dird/msgchan.c to use bsock class calls rather than
509 bnet calls -- no functionality change.
511 kes Modify the Verify output to specify if files are missing on
512 the Volume(s) or disk. Fixes confusion in bug #916.
513 kes When more than one Volume is read in a migration job, the last
514 Volume bytes reported are from the last read volume rather than
515 the last written volume. Fixed. This fixes bug #910.
516 kes Fix display of Recycle flag after update volume=foo recycle=yes.
517 It previously printed New Recyle flag is: no. This fixes bug
520 kes Correct seg fault when switching tape drives during restore.
521 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
522 be used until after 2.2.0 release.
524 kes Remove fnmatch() in SD that permitted wild card specifications.
527 kes Fix %g in filename returned by SQL for browse tree reported by
529 kes Fix configure so that it puts config.out in the cwd rather than
531 kes Attempt to fix the locking problem reported by Eric in bug #906.
532 kes Make berrno class to leave errno unchanged after constructor call.
533 kes Make bnet_server use the heap rather than the stack to allocate
534 its socket fd pointers to avoid a crash at termination. Problem
535 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
537 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
538 and putting it in depkgs-qt along with Qt4.3.
540 kes Rework code in acquire.c that switches drives for reading when
541 the Media Type does not match. This should fix bug #906
543 ebl Fix a director segfault during job setup #907
544 kes Correct seg fault in postgresql when first operation returns no
545 rows. Fixes Dirks File browser problem seg fault with bat.
547 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
548 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
551 kes Implement PopUp YES/NO dialog for bat.
553 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
555 kes Correct RunScript to terminate job in FD on failure.
556 kes Change abort_on_error and AbortJobOnError to fail_on_error
557 and FailJobOnError in RunScripts.
558 kes Minor tweaks of code formating in RunScripts, principally to
559 avoid depassing 80 columns.
561 kes Eliminate one #ifdef Win32 in bsmtp
562 kes Implement grow tool to grow a file for testing very large databases.
563 kes Add big-vol-test to test Bacula seeking with > 5GB.
566 kes Modify find_next_volume() to return all values in Media record.
567 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
571 kes Update Release notes
573 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
574 Warning, in previous beta version, all media get from scratch keep their
577 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
578 This should fix bug #842. Made a note to look at removing the temp
579 files at the end of the install.
580 kes Add ability to mount and unmount a file device providing it is
581 marked as being removable and has the appropriate mount and unmount
582 commands defined in the Device resource. This fixes bug #830.
583 kes When applying a storage override, release all previous storage
584 definitions rather than just prepending the new storage.
585 This should prevent a good deal of confusion.
587 kes Implement ./configure search for qwt libraries.
589 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
590 Win32 FD. This should fix bug #893.
591 kes Remove an unnecessary beep in Win32 init code.
592 kes Update copyright dates in Win32 executable about boxes.
593 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
594 code with a BSD getopt.c and getopt.h.
595 kes Remove sched.h from the Win32 compat directory -- not used.
596 kes Remove the Exit menu item from the Win32 tray monitor. If you really
597 need to shut it down, do it through the services panel or the command
599 kes Remove some inappropriate Bacula FSFE copyrights.
600 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
601 kes Fix regress config non-portable test as pointed out by
602 Florian Heigl <florian.heigl@gmail.com>
603 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
604 as pointed out by Florian Heigl <florian.heigl@gmail.com>
606 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
607 Reported by Frank Sweetser.
611 kes Fix client-only build.
612 kes Integrate client-only fixes for bsys (initgroups) and conio from
613 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
614 kes Make arguments to get_scratch_volume() in same order as other
616 kes Rework the prune_volumes() subroutine so that after purging and
617 no volume found in desired pool, it will check for a scratch
618 volume. This prevents recycling the whole scratch pool.
619 kes Add code to status storage to print boffset_t (largefile support).
621 kes Move qwt (Graphics libarary for Qt4) to depkgs.
622 kes You now need a --with-qwt=<dir> to be able to build bat.
623 kes Update src/win32/cats/bacula_cats.def to include the new
624 db_get_query_dbids() call on Win32.
626 kes Correct a problem when selecting a scratch volume and moving
627 it to another pool that lost some columns.
628 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
629 kes Enhance Autochanger error messages to include Volume and device name.
630 kes Rework prune_volumes() code to take account of InChanger flag,
631 and to handle recycling volumes going to the Scratch pool and
632 current pool because the RecyclePool directive.
633 kes Implement a better and more efficient db_get_query_dbids() to
634 handle creating and passing back a list of DBIds.
638 kes Start work on new more efficient DBId subroutine. First use
639 will be for recycling volume to Scratch inchanger.
640 kes Increase number of JobIds in pruning from 1000 to 10000.
641 This to be replaced by above routine.
642 kes Begin implementation of building Qt4 on Win32.
643 kes Correct typo in fix I added for bad TLS shutdown.
644 kes Pull 2.0.3 patches into patches directory.
645 kes Update Release notes. Include qt-console in line count.
646 kes Update Projects file.
648 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
649 bug in migration code where a job that spanned two volumes
652 kes Implement new BST_DESPOOLING blocked state. Change from locking
653 during despooling in SD to blocking. This means that other threads
654 can work with the device structure, in particular the reservations
655 system while despooling.
657 kes Fix return in reservation message queue that missed clearing
658 the jcr lock (implemented 26Jun07 below).
659 kes Rename a number of dev methods to make locking function names
661 kes Document locking in lock.c. Move lock structures to new file
664 kes Move reservations message lock to lock jcr only this
666 kes Move main SD locking code into lock.c (new file).
667 kes Update Win32 build to include lock.c
671 kes Dirk committed the qwt library code for drawing graphs in bat.
672 kes Tweak install of qwt so that it is integrated with ./configure.
674 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
675 out by Eric (my typo).
676 ebl Fix configure.in to get batch mode enable
677 kes Return correct string from authenticate.cpp in bat when connecting
679 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
680 spurious line drops when using TLS.
681 kes Do not file reparse points when restoring a file that already
684 kes Implement Windows reparse points -- similar to directories, but
685 we do not descend into it. This is a first cut. They seem to
686 be backed up, but restore is not yet tested.
687 kes Remove restore_blocking in tls code when shutting a socket to leave
688 it in blocking mode. Hopefully this will fix the encryption bug
689 reported by Frank Sweetser.
690 kes When opening a file for backup, tell the OS that we are going to
691 read it sequentially -- optimization.
692 kes Change variable names in authenticate_director() to not conflict
693 with member names in bat. Caused great confusion with compiler,
696 kes Queue openssl error messages in case of comm problem.
697 kes Do shutdown() call if socket terminated.
698 kes Remove some duplicated code in tls.c
699 kes Move more of the bsock member variables into private and access
701 kes Add Frank Sweetser's tls-test to the regression suite.
703 kes Add Swedish sv.po file
705 kes Don't print clock skew message in FD if less than 3 seconds diff.
706 kes Add a bit of VSS info to status client.
707 kes Implement a first cut of Vista VSS, using Win2003 code.
711 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
712 loaded tape but uses first drive).
713 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
714 This was indeed a Win32 issue.
716 kes Simplify search of autochanger for in-use Volume.
717 kes Fix exit condition of check for in-use volume. kes Remove
718 inappropriate my_postgresql_free_result() in db_close()
720 kes Fix bad return in FD when encryption signature not found.
721 Probably caused a crash.
722 kes Inhibit missing encryption signature error messages for
723 file types where no signature computed.
724 kes Correct inverted check on autochanger in reservation system.
725 kes Tweak debug code in autochanger reservation.
727 kes Add some additional locking in the cats directory in subroutines
728 that modify packet variables called from batch insert.
729 kes Rework how dcrs are allocated. new_dcr() can now be called
730 with an existing pointer, and it will simply clean it up.
731 This allows the reservation system to test various different
732 devices, and will permit easy device changes.
733 kes A bunch of changes all over to handle new new_dcr() calling
735 kes Work more on the Volume management in the SD. Remember Volumes
736 for tape drives and for autochangers (even virtual disk changers).
737 kes When looking at the Volume list to reserve a drive, handle
738 autochanger names correctly by interating through the changer
739 devices. Also call the Director to see if a Volume is suitable
741 kes Fix some bugs in bscan. Make sure all media records are written.
742 Make sure that valid JobMedia records are written for disk files.
743 Previously they were completely wrong.
744 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
745 that the URLs don't change and so that the developers will all
746 work off the same copy. Rebuild from scrach.
747 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
751 kes Fix seg fault in FD from incorrect digest size.
752 kes Fix argument to non-OpenSSL crypto.c subroutine.
756 kes Remove a few malloc()s from the encryption code.
757 kes Use the class calls to bsock in filed/backup.c and restore.c in
758 place of the old bnet_xxx code.
759 kes Implement code that does an on the fly calculation of the
760 signing digest during restore of encrypted files. It makes
761 a best guess at the algorithm, and if it is not correct, will
762 then revert to the old code which reads the file after it is
764 kes Implement at least one missing crypto stream in stream_to_ascii()
765 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
766 #877 where a reload with bad syntax causes Dir to exit.
768 Cut: 2.1.14 beta (not released)
770 kes Do not free a volume on a tape drive until another volume is
771 mounted and read, or the autochanger unloads the volume.
772 This should help the SD re-use volumes that are already mounted,
773 and should fix bug #886.
774 kes Apply patch from user brettedgar that allows gnome2-console include
775 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
776 kes Apply patch from Lucien Weller that fixes day of week calculation
777 because of DST flag problem. Fixes bug #887.
779 kes Move find_next_appendable_volume() to after acquiring a valid device
780 in reserve.c. This fixes bug #864 -- confirmed by reporter.
782 kes Unable to reproduce bug 872. However added additional testing for
784 kes Bug #874 resolved by documenting SQLite limitations.
785 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
786 kes Bug #881 resolved by removing typo in mtx-changer script.
787 kes Made Frank Sweetser's wiki the official Bacula wiki with his
788 approval. Added a link to the wiki on the web page, and implemented
789 a backup from http://paramount.ind.wpi.edu
791 kes Fix update allfrompool to pass pool name.
793 kes Convert to pure GPL v2 license.
794 kes Fix sscanf problems reported by Peter Buschman that caused
795 a bus error on Solaris.
796 kes Rework (simplify) the select prompt in bat.
797 kes Move get_jobid_from_tid() into lib and create a
799 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
800 should definitely fix the problem of lost error messages in the
802 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
803 kes Eliminate tcpd.h from the project. Enclose the #include from the
804 library with extern C ...
805 kes Add print of signal name when a signal is trapped.
809 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
811 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
812 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
813 makes SQLit3 run 30 times faster, though a bit less safe.
814 kes Implement --with-batch-insert in configure and detection of thread
815 safe libraries. It is on by default, but turned off if no thread
816 safe library (e.g. SQLite 2) is available.
818 kes Fix Bacula PostgreSQL buffer overruns.
819 kes Do better checking for NULL results returned from PostgreSQL;
820 implement retry for failed queries; clear results buffer after
821 failed query. Hopefully this will correct the PostgreSQL failures.
823 kes Implement algorithm to handle only one appendable volume with
824 Prefer Mounted Volumes = no.
825 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
826 returned from a query.
827 kes Make volume lock recursive.
828 kes Implement an additional volume reservation algorithm that
829 starts by considering all reserved volumes then uses the
830 old brute force algorithm of searching the resources to
831 find a suitable device.
832 kes Add new reservations debug code and refine the old code.
833 kes Update the win32/dll/bacula.defs file.
835 kes Tweak reservations algorithm to permit a few more cases, i.e.
836 volume reserved, but on different drive, ...
837 kes Enhance SD status to include Pool and Media Type for drive in a
838 more readable format (a bit longer).
839 kes Fix PostgreSQL double free.
841 kes Minor refactoring of restore decryption code.
842 kes Add code to smartall.c to detect double free of a buffer.
844 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
845 so that bsmtp will create a correct email address (mailbox only).
846 kes Modify 'memory' command so that the buffers are listed as 'In use'
847 to avoid confusion with Orphaned buffers.
848 kes I reworked the OpenSSL include/lib flags to be handled in
849 the standard Bacula way, which should fix bug #863 concerning
850 non-standard OpenSSL libraries.
852 kes Implement Help Browser window for bat.
853 kes Fix reload bug that reset StorageId to zero.
855 kes Fix TLS #ifdefing when TLS turned off.
856 kes Ensure that when labelling a tape with Slot=0 that InChanger
858 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
860 kes Add StartTime to final uar_sel_jobid_temp query so that we can
861 add DISTINCT (required by PostgreSQL).
862 kes Implement BSOCK authenticate_director() method. Eventually will
863 authenicate all daemons.
864 kes Move several more functions into the BSOCK class.
866 kes Add code to tell the OS that we no longer need a cached
867 file that we were reading. In findlib/bfile.c. Also,
868 only cache files that we are reading. Thanks to
869 Tobias Oetiker <tobi@oetiker.ch> for the idea.
870 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
871 kes Implement script to automatically generate cats and dll .def
873 kes Update README.mingw32 to include new .def file generation.
874 kes Correct typo in UTF-8 error message as reported by:
875 jhernandez <julianhernandez@gmail.com>
876 kes Add additional sm_check() code on debug level 1.
877 kes Set default debug level to 1.
878 kes Trap SIGABRT in attempt to get traceback.
880 kes Reduce bat connect timeout from 30 to 15 seconds.
881 kes More restructuring and implementing BSOCK class in place of
883 kes Remove a few unnecessary malloc() tests in crypto code.
884 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
885 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
886 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
888 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
890 kes Fix Verify InitCatalog. The attributes were not pointing to the
891 correct saved location.
892 kes Implement message callback so that GUI is sure to get all
893 daemon messages. Currently displayed in a dialog in bat.
894 kes Ignore SIGUSR2 (Bacula timer) in bat.
895 kes Apply regress patch from bug #859 to allow regress to work
896 with Solaris compiler.
898 kes Begin adding TLS support to bat.
899 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
900 clean up lex.c and make it more readable.
902 kes Move more bnet functions into the BSOCK class.
903 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
904 kes Complete change of berrno strerror() method to bstrerror()
908 kes Cleanup incorrect email addresses in bsmtp.
909 kes Make bat display initial messages rather than discard them.
911 kes First cut of adding .mod to the run command.
912 kes Implement auto display of messages in bat.
913 kes Enhanced preferences to allow all Bacula output to be
916 kes Try to make bsmtp date routines more generic.
917 kes Fixed bug #856 autochanger documentation.
918 kes Rework bsmtp date editing for Win32. This fixes bug #854.
919 kes Add new cats entry point so Win32 builds.
921 kes Attempt to fix bsmtp date editing on OSes without %z editing.
923 kes Do better checking for the MySQL 64 bit libraries looking for both
924 .a and .so libraries.
925 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
926 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
927 kes Require the thread safe version of MySQL during configure. Thanks
928 to Andre Noll for pointing this out.
929 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
930 continuing in migration code.
931 kes Apply implementation of tray-monitor font derived from gnome-console
932 submitted by Andreas Piesk <a.piesk@gmx.net>
934 kes Eliminate important memory loss in SQLite
935 kes Fixed the batch insert MySQL thread specific data that was not
936 being freed. See cats/mysql.c:db_thread_cleanup().
937 kes Fix restore before command.
938 kes Convert old hdr.name to name() in a few places.
939 kes Implement update jobid command.
940 kes Return all time_t dates in db_get_job_record()
941 kes Stop watchdog in SD earlier.
942 kes Put Pool just after Storage in please mount message.
943 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
946 kes Update the po files.
947 kes Fix Verify InitCatalog by making it cache attributes.
949 kes Change name bacula-bat to bat for man 1 page to correspond to
951 kes Check for client and store NULL pointers in status command. This
953 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
954 kes Fix sign extended editing of %p.
955 kes Clean out a little old #ifdefing in cats/mysql.c
957 kes If time diff between DIR and FD is more than 600 seconds convert
958 INFO message to WARNING.
959 kes Implement heap size display in status for all daemons.
960 kes Attempt to fix MySQL db open memory loss (not successfull).
961 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
962 kes Eliminate memory loss in MySQL (possibly other SQLs) during
963 Query. This looks like a MySQL but but by doing extra releases,
964 the memory goes away. This should fix bug #847.
966 kes When backup fails, cancel SD before waiting for sd termination.
967 kes If SD is waiting for FD to connect during cancel, wake up the
969 kes Fix fsf code so that errno is correctly reported.
970 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
972 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
973 so that Bacula doesn't later stumble into a seg fault.
974 kes Use the term Restore Client in the restore Job report.
975 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
976 the original job's FileSetId.
977 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
978 spooling in migration jobs. Not yet tested.
979 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
980 reading conf file from a pipe. However, do it with open_bpipe()
981 rather than popen. Not yet tested.
983 kes Fix an ugly bug where the VolCatBytes were getting updated
985 kes Implement bconsole memory command that prints current memory
986 usage, plus smartalloc dump.
987 kes Clarify some error messages in backup, admin, and migrate.
988 kes Shrink label dialog to smaller size.
989 kes Invert Cancel OK buttons on restore to be OK Cancel.
990 kes More strerror() to bstrerror() conversions.
992 kes Start implementing bstrerror() in place of strerror().
993 kes Stripping path -- seems to work.
995 kes Prevent door and port files from being restored (mostly
997 kes Free an unreleased buffer in compat code.
998 kes Change console Job name from *Console* to -Console- to eliminate
999 Win32 filename problems. Put Win32 path separator when creating
1000 Console file. This fixes bug #846.
1001 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1003 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1005 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1006 to force Win32 error message.
1008 kes First cut strip path. The data should be passed to the FD,
1009 but nothing is done with it yet.
1010 kes Enhance the digest and signature routines in the crypto
1011 library to accept a JCR and to use it to print error messages
1012 so that they will go in the Job report rather than the daemon's
1014 kes Simplify some of the verify signature code.
1015 kes Simplify a few of the alternative returns in the signature
1018 ebl Use only POSIX regex instead of GNU regex in breg.c for
1019 File relocation. It fix broken freebsd compilation.
1020 kes Convert all other Dir files to use new ua class message
1022 kes Tentative fix for missing digest signature in bug 807.
1023 kes Correct handle problem in new win32_ftruncate routine.
1024 kes Convert ua_purge.c and ua_update.c to use new ua class
1025 message routines for bat.
1027 kes Correct incorrect installation of LICENSE in Win32 installer.
1028 kes Display LICENSE at the beginning of the Win32 install.
1029 kes Attempt to correct the need for the png files to be installed
1031 kes Reapply my bat.conf install script in qt-console. I think I
1032 editted bat.pro instead of bat.pro.in and it was lost.
1033 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1034 the /var/lock/subsys for subsysdir. Also corrects typos in the
1037 kes First cut update job.
1038 kes Correct configure to include qmake of src/qt-console directory.
1040 kes Make restore job yes/mod/no print in one command so GUI works.
1041 kes First cut implementing backup and restore client.
1042 kes Correct editing in Verify output that caused a seg fault.
1044 kes Insure that bat.conf is not overwritten during installation.
1045 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1046 while I was implementing migration in March 2006 !
1048 ebl Cleanup file relocation, using char *RegexWhere instead of
1049 char *where + bool where_use_regexp
1050 kes Update some manpages and add bat manpage.
1051 kes Make a first cut at converting bacula.spec.in for bwx-console
1053 kes Apply patch from John Goerzen to add hostname as fourth argument
1054 to make_catalog_backup script.
1055 kes Fix typos I introduced into bsmtp.c
1056 kes Make pm_strxxx() routines handle input of NULL pointer. This
1057 is to protect from NULL pointers returned from SQL databases.
1058 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1059 kes Add more debug to FIFO code -- fix fifo regression test.
1061 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1062 kes Add thread timer to bnet_connect() to break from OS if wait time
1065 kes Update Win32 build to include new files, new symbols, and
1067 kes Implement socket level heartbeat (tcp_keepidle)
1068 ebl Commit File relocation patch
1069 kes Make bat have 'make install' target.
1070 kes Warn during install if old gnome-console binary found.
1071 kes Warn during install if old wx-console binary found.
1072 kes Add -8 option to bsmtp command line to add content type utf-8.
1073 Fixes bug #809. (Character coding problem in bsmtp).
1074 kes If < is found in target (from, to, cc) then do not enclose the
1075 target in < > in bsmtp. Fixes bug #772 (malformed address).
1076 kes When printing certain items in dbcheck, stop after 300000.
1077 Fixes bug #822. (dbcheck loops).
1078 kes Incorrect status in Dir after waiting for mount with poll set.
1081 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1083 kes Print waiting to reserve a device every 5 mins.
1085 kes Don't call close_part in label.c if tape and relabel.
1086 kes Don't free volume if busy in close() -- should help with
1088 ebl Fix #824 RunScript bug (After script could be execute twice)
1089 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1090 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1091 Add a regression script to test RunScript
1093 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1096 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1097 deprecated. No additional bugs will be fixed, and they will be dropped
1098 in a future release (probably 2.4.0).
1099 kes Change name of wx-console to bwx-console to make it more Bacula
1101 kes Change the name of gnome-console to bgnome-console to make it
1104 kes Some time in March, a Feature Request with patch from Jorj Bauer
1105 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1107 The ability for the director to validate a Client (FD) CN against
1108 an arbitrary set of patterns rather than the hostname, with
1109 A new 'TLS Allowed CN' set of directives which are implemented
1110 in the Client resource. Then pattern matching is used in place
1111 of hostname matching against the Certificate's CN. As an example, we
1112 have certificates which (a) use a local CA, and (b) have a CN of the
1114 kes Add new/changed entry points to Win32 build
1115 kes Create unaccepted-projects for projects that are not accepted.
1116 kes Simplify locking in the reservations system.
1117 kes Add more debug code in reservations.
1118 kes Make sure error condition on reserving a volume is handled correctly.
1119 kes Correct handling of volume_in_use.
1120 kes Correct handling of initializing a device.
1121 kes Move handling of broadcasting releasing a device into release_device().
1122 kes Correct attaching dcr to dev so that it is only done if device
1123 is properly initiated.
1125 kes Locking debug level tweaks in SD.
1126 kes Tweak new Volume code.
1128 kes Add exec external-command [wait-seconds] to bconsole. This
1129 executes the external-command. Note! normally external-command
1130 should be enclosed in double quotes.
1131 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1132 it should normally be off in a production system.
1134 kes Implement die command for SD so that we can force it to dump.
1135 kes Implement SD lock debug code.
1136 kes Implement new algorithm for keeping Volume list in SD. It
1137 is now owned by the device.
1139 kes Implement new code for freeing in use volumes that should
1140 resolve if not all, some of the problems of multiple drive
1141 tape conflicts described in bug 801.
1143 kes Fix gui/bacula-web/images files in svn.
1144 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1146 ebl Fix a bug in batch mode (in string escape)
1147 kes Correct migration prune SQL typo that crept in in a
1148 recent 2.1.x change.
1150 kes Move bnet_despool() into class in bsock.c
1151 kes Modify job report to include director name and Build OS.
1152 kes Move drop root privilege and check_catalog() before fork.
1153 kes Add update database scripts (version 9 to 10) to updatedb directory.
1155 ebl Check size and age of each file after its backup to see if
1156 it has changed during backup, if 'checkfilechanges' is set.
1157 The FD will do an extra check (stat(2)) after
1158 each file backup. mtime, ctime and size are compared with
1159 'before backup' information. If time or size mismatch, an
1160 error message will be generated. You must upgrade FD to use it.
1162 kes Make database name and user configurable
1163 --with-db-name=xxx --with-db-user=xxx
1164 kes Add back database type to message.c for debugging.
1166 kes Implement dir_sql() which issues an SQL query.
1167 kes Modify bat medialist to use dir_sql() and do some minor C++
1168 formatting as well as eliminating a number of pointers, simplifing
1171 kes Fix some of the mtx-changer grep commands for tape label readers.
1172 kes Convert a number of bsendmsg into the appropriate send/warning/error
1173 message class calls.
1174 kes Suppress the using database message in the .sql command.
1175 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1177 kes Add context menu for floating a window.
1178 kes Some minor cleanup and name changes in qt-console
1179 kes Add doing mt setblk 0 in Win32 mtx-changer.
1180 kes Apply Martin's bug fix to move definition of ENODATA for
1182 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1183 sqlite2 and sqlite3.
1185 kes More pruning cleanup.
1186 kes Turn on wait_for_drive by default in mtx-changer.
1187 kes Turn on Batch insert code by default as it now passes regression.
1188 kes Add ./configure --enable-bat to enable building of Bat.
1189 No install yet though.
1191 kes Implement a new .sql command for bat.
1192 kes Implement code to turn off pruning in obtaining the next volume.
1193 Pruning is turned off for the status dir command, but turned on
1194 for SD requests and for the list nextvolume command.
1196 kes Correct Qmsg() that was not updated correctly when committing a
1197 previous change (probably the recent TLS patch).
1199 kes Write new subroutine is_volume_purged() that explicitly checks
1200 if the Volume is purged, and if so marks it as such. This should
1201 resolve problems reported about needing to mount twice to recycle
1203 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1204 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1205 amount of duplicated code.
1206 kes Do volume pruning only for the Media Type desired (reduces pruning time
1207 if multiple Media Types are in the same pool).
1208 kes Implement more detailed info in the Job report for the Bacula version
1210 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1212 ebl Add bbatch tool to bench database and insert mode.
1213 Fix sql quote stuff in batch mode
1214 Fix sql stuff for mysql
1216 kes Correct problems with am/pm scheduling. Fixes bug #808.
1217 kes Implement new prunning code that prunes up to 1000 jobs at
1218 the same time. The same technique can be applied to a number
1219 of other prune/purge subroutines.
1220 kes Add an insanity check when starting a new tape job to ensure
1221 that the tape position has not been changed. If so fail the
1223 kes Fix Win32 build for dlls to add the folllowing:
1224 src/lib/bsock.c -- new file with new entry points
1225 src/lib/dlist.c -- new entry points
1226 src/cats/sql_create.c -- new entry point
1227 src/cats/sql_cmds.c -- new DATA item exported
1229 ebl batch mode cleanup bscan-test is ok now.
1230 kes Implement SD code to check length of disk volume before appending.
1232 kes Correct return status on db_batch... routines.
1233 kes Add call to db_write_batch_file_records() to migration code.
1234 ebl Fix AfterJob timing
1235 kes Move the checking of the database in initializion of the Director
1236 to after we drop privileges. This avoids the need for both root
1237 and bacula access to the DB.
1238 kes Correct a misplaced variable definition in src/filed/backup.c
1239 kes Correct how the new batch insert db_create_attributes_record()
1240 uses the arguments. Caused a seg fault in bscan.
1241 kes Implement lock() and unlock() methods in DEVICE class.
1242 Implement block() and set_block(xx) methods in DEVICE class.
1243 kes Modify bnet_connect() so that it uses time() to check for the
1244 wait time expiring (on some OSes, some system calls may not
1245 return immediately).
1246 kes Modify Verify to obtain the previous JobId when it is actually
1247 running rather than at schedule time (as it was in 1.38.x).
1248 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1250 kes When checking pid in pid file, continue running if the pid is
1251 the same as ours. This occurs on IRIX after a system crash.
1254 kes Extend new GUI API.
1255 kes Make the ua structure a class, and implement send_msg(),
1256 error_msg(), warning_msg(), and info_msg().
1258 kes Apply fix from for building wx-console on the Mac from
1260 kes Implement new select mechanism for GUI programs.
1261 kes Reorganize initialization of stackedWidgets in bat.
1263 kes Add updated nagios plugin supplied by Christian Masopust.
1265 kes More bat implementation.
1266 kes File migrate bug with Pool Occupancy using mediaid instead
1267 of jobids. Fixes bug #795.
1268 kes Fix orphaned buffers in filed backup and verify due to
1269 crypto buffers not freed during errors. Fixes bug #789.
1270 kes Extend new GUI api code to tree commands.
1271 kes Ensure that tree and dot commands check console ACLs.
1272 kes Permit marking directory with trailing slash.
1273 kes Allow 20 console connections (instead of only 10).
1275 kes Add smartctl call to bacula-sd.conf as an example of getting
1278 kes Modify jobq.c to let simultaneous restore jobs run. This may
1279 cause them to fail if they cannot get a drive.
1280 kes Add Client Connect Wait to Storage daemon to permit users to
1281 modify the time the SD waits for a FD connection.
1283 kes Correct virtual changer check which was backwards. This caused
1284 volumes to be unloaded into slots already occupied.
1286 kes Apply Command ACL filter to JobId list in restore command.
1287 kes Correct typeo in var.c patch.
1289 kes Don't let Bacula prune File or Job records for the current Job.
1290 kes Fix variable substitution pad + inc bug reported (with patch)
1293 kes Correct SQLite log table index as reported by Luca Berra.
1295 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1297 kes Begin implementing new comm signals for API.
1298 kes Fix a few places in lib/message.c where the open fd may
1300 kes Continue implementing lib/bsock.c (real class). Make jcr,
1301 who, host, and port private. There are new methods to access
1302 them for non-class use. This required touching a number of files.
1304 kes Add LANG=C to autoconf/randpass so it works with languages other
1305 than English. Fixes bug #788.
1307 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1309 You will not be able to generate Include/Exclude list any more.
1310 It will be fixed soon.
1311 If you want to use this, you can apply
1312 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1314 kes Restore of sockets created false error messages because Bacula
1315 no longer restores sockets, but the code was still trying to
1316 set the attributes on a non-existent file. Reported by a user.
1317 ebl finish RecyclePool feature
1318 Media will takes Pool.RecyclePool
1319 when moving from Scratch to a Pool or when user will do
1320 update volume=xxx frompool
1321 To use it, add RecyclePool = aPool to your Pool resource
1324 RecyclePool = Scratch
1328 kes Expand new BSOCK class adding signal() and new BNET signals.
1329 kes Begin enhancing the dot commands adding a new API function
1330 that returns more information and will make it easier
1331 to interface to the Director from a program.
1333 kes Make DEVICE fd private. Its new name is m_fd, and can be
1334 obtained with dev->fd() outside the class. This is the
1335 first of many DEVICE members to be made private.
1336 kes Implement Michael Renner's idea on having a virtual disk
1337 changer. I made some minor modifications (e.g. I did not
1338 implement the Virtual Changer directive, but simply set
1339 the Changer Command to an empty string.
1341 kes Implement a BSOCK send() method that writes the whole record
1342 in a single write() request rather than in two.
1343 ebl add update volume=xxx recyclepool=yyyy
1344 volume takes recyclepool from pool when using update volume=xxx from pool
1346 kes Fix encryption deblocking bug, which caused some restored files
1347 to be truncated. This fixes bug #763.
1348 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1349 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1351 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1352 ebl Use btime_t instead of uint64_t in media patch.
1354 kes Optimize the use of the database a bit in the Status dir command.
1355 Only open it when needed, ensure that if any previous database
1356 was opened, it is closed.
1358 kes Correct VolCatBytes bug from media patch.
1359 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1360 in the case of orphaned records.
1361 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1362 and File records in 300K chunks to be more efficient. This
1363 idea came from Juan Luis Frances (if I remember right).
1364 kes Apply Eric's scratch patch that moves a purged Volume to
1365 the RecyclePool. Question: how is RecyclePool set? what
1366 happens to the ScratchPool?
1367 kes Apply Eric's media patch that collects read/write media
1368 times as well as byte counts. This patch requires a
1369 simultaneous upgrade of the DIR and SD. Note, there
1370 should be some way to turn off timing. I'm not sure
1371 times are in Bacula units.
1372 kes Apply Eric's batch-insert patch.
1374 kes Update projects list.
1376 kes Implement Include/Exclude file lists in FD as dlists using
1377 the new dlistString class. This permits efficiently having
1378 large include/exclude lists and completes project Item 25.
1379 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1380 console is authorized to cancel the job. This fixes bug
1382 kes Modify SD so that the VolCatJobs medium record is updated
1383 at the beginning of a Job rather than the end. This
1384 fixes bug #775 where exceeding MaxVolJobs caused jobs
1386 kes Added a mutex around getting and setting Volume information
1387 so that multiple simultaneous jobs will single thread.
1389 Switch to using Subversion
1390 kes Remove src/pygtk-console/ from configure
1392 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1393 plus the entrypoints.
1394 kes Apply patch supplied that corrects debug print
1395 in canceling jobs for max run time. Supplied as
1396 part of bug #621, which was previously fixed.
1398 kes Test on job_canceled() and sd_msg_thread_done inside
1399 loop starting the message thread to avoid a race condition.
1401 kes Remove rl_catch_signal from console.c as it conflicted
1402 with the header definition. Fixes bug #765.
1403 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1405 kes Clarify some stored/acquire messages to indicate if the
1406 problem is with read or append.
1408 kes Fix memory leak with storage ids in cats/sql_get.c
1409 kes Terminate watchdog earlier to avoid reference to released
1410 memory -- reported by Jason Austin.
1411 kes Move closing the database from jobq.c to the director daemon
1412 termination routine. This fixes memory leaks for shadow jobs
1413 (i.e. migration jobs).
1414 kes Free up the unique jobid chain items in migrate.c. This fixes
1415 a memory leak problem.
1416 kes Convert some ugly looking for statements to use foreach_alist
1417 in findlib/find.c. This will facilitate converting the structures
1418 to use dlist (for large include/exclude lists).
1419 kes Fix a bug in the btree.c and btree.h routines, then rename them
1420 rblist and add them to be built in src/lib. Include some new
1421 methods written by Rudolf Cejka that make the code more readable
1422 (hides some of the ugly casting).
1423 kes Add set_next() and set_prev() methods which make the code much more
1424 readable. Also add a new dlistString class that facilitates storing
1425 strings in dlists. To be used in the large include/exclude lists.
1426 kes Make some trivial modifications to lib/tree.h that use rblist
1427 rather than dlist for storing the tree links. This was suggested
1428 by Rudolf Cejka. The result of this is that the restore tree now
1429 uses red-black binary trees rather than simple linked lists. This
1430 should give rather dramatic speed improvements for directories
1431 contining large numbers of directories/files (more than 10000).
1433 kes Fix maxruntime bug #621.
1435 ebl Implement the include JobID in spool file name project.
1436 kes Reorder projects file in order determined by Jan 2007 vote.
1437 kes Implement item #12 on project list -- quick release of FD by
1439 kes Fix open of SQLite3 db where user does not have write permission
1440 so that DIR does not crash. Fixes bug #761.
1442 kes Add back missing @ in Win32 Makefile.
1443 kes Change 'Device not configured to autolabel' from INFO
1445 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1446 which should restart an indefinite # of times.
1447 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1448 other DIR specifications.
1450 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1451 Fix path quoting in SQLite scripts.
1452 Fix problems with SHGetFolderPath.
1454 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1456 kes Fix Job restart on error bug that promotes an Inc to a Full
1457 backup. This should fix bug #755.
1458 kes Add qt-console and first cut of code.
1462 kes Fix Bacula->Documentation link on Win32 to point to index.html
1463 instead of bacula.html. Fixed bug #750.
1464 kes Return JobId in db_get_job_record() when JobId==0. This should
1466 kes Do not release source pointers when restarting a failed job.
1468 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1469 This *should* fix bug #747.
1470 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1473 kes Modify USTORE constructor to set an empty store_source string,
1474 and don't copy the store_source string in a cancel. Hopefully
1475 this will fix Arno's seg fault, bug #744.
1476 kes Add back code to disable conio in configure. Fixes bug #743.
1477 kes Correct the Options scanner in the FD to correctly handle
1478 SHA1 option, which was eating the next option. Reported by
1480 kes Add code to indicate when the SD is spooling, spool wait, and
1481 despooling as requested by Alan Brown.
1483 Version 2.0.0 released: 4 January 2007