1 Technical notes on version 2.2
5 kes Implement regression that explicitly tests swapping a Volume
6 from one drive to another.
7 kes Enhance disk-changer to detect most error conditions.
8 kes Fix SD code so that it properly swaps a Volume between drives.
11 kes Prevent a Volume that is being swapped from being freed from
12 the volume list. This will most likely fix, at least partially,
14 kes Fix strippath so that it does not get a buffer overrun and crash FD.
16 kes Make inability to change owner/group when creating a dir only a
17 warning rather than an error.
19 ebl Fix SQL query in migration code
21 kes Force unload of volume when wrong volume mounted in SD.
23 kes Fix bat seg fault at termination.
24 kes Add Bacula generated version to bat about box.
26 Beta Release Version 2.2.10-b1
28 kes Permit multiple simultaneous restores -- experiment.
30 kes Backport development stream SD reservation system changes.
34 kes Move final volume swapping code to DCR method and
35 call it from acquire_for_read().
36 kes When wrong volume is mounted during read, unload_autochanger.
38 kes Stop searching for Volumes in SD askdir if DIR returns the
39 same volume name twice in a row.
41 kes Tweak the swap Volume from one drive to another code so that
43 kes Resolve several problems with recycling that broke the new
44 code (these problems are in 2.2.9 as well).
45 kes Remove the volume lock when calling the sysop code.
46 kes Don't mark a reserved volume with no writers as unused otherwise
49 kes Rework class structures for VOLRES, DCR, and DEVICE to make
50 the method names a bit more logical, and for more logically
51 handling the responsibilities.
53 kes Remove redundant code in terminating the scheduler that just
54 causes a seg fault in many cases.
55 kes Cleanup releasing a volume and make it a DCR method.
56 kes Improve algorithm for detecting pre-reserved volume and
59 kes Tweak volume swapping code so it works.
60 kes Correct name overloading in mount.c
61 kes Replace released flag in VOLRES with reserved and add access
62 methods for the VOLRES class.
63 kes Prevent volume from being released while being swapped.
64 kes Refactor parts of stored/mount.c
66 ebl Add sanity checks for VolWriteTime and VolReadTime
67 ebl Take care of bad clock changes while computing VolWriteTime
68 and VolReadTime. This should fix or limit #1066
69 kes Correct error string numbers in dird/catreq.c
70 kes Restructure reserving, acquiring, and mounting volumes. Calls to
71 autochanger are deferred for mount.c -- simplifes the code.
73 kes Do not prune any running job. It just fails the job.
74 kes Lock the volumes when changing dev->reserved_device and marking
75 the volume unused otherwise the device can get reserved by
76 another job before the volume is released, thus blocking it.
79 Beta Release Version 2.2.9-b7
81 kes Close bat console windows first to eliminate error message
83 kes Remove useless code in Scheduler that causes seg fault on
85 kes Correct some SD catalog request error messages.
86 kes Don't allow pruning of any running job.
87 kes Turn off code in read_record that causes a seg fault in the SD
88 when reading past an EOS_LABEL.
89 kes Turn off unloading the autochanger in reserve.c as it just
91 kes Lock volumes when unreserving a device.
92 kes Do not mark volume unused when recycling.
93 kes When acquiring, don't mark volume unused if it is reserved (busy).
95 Beta Release Version 2.2.9-b6
97 kes Eliminate ./configure warning on po directory
98 kes Fix bug #1063, reuse of freed ptr in list nextvol.
99 kes Release regex compile buffer in filed/job.c
100 kes Add proper type of const char in sql_create.c
101 kes Turn off debug in daemon termination routines
102 kes Move free_volume_list() before devices are freed in stored.c
103 kes Fix reference to uninitalized stack variables in bregex.c.
104 This should correct bug #1067.
106 kes Fix possible seg fault in SD when freeing a volume entry.
108 kes Apply patch from bug #1069 that corrects spurious error messages
109 when ACLs enabled on SGI but no ACL exists.
110 ebl Fix a storage deamon segfault at debug level 500.
112 Beta Release Version 2.2.9-b5 -- not released
114 Beta Release Version 2.2.9-b4
116 kes Re-enable code to remember last volume mounted on a non-tape
118 kes Add patch supplied in bug #1068 that fixes a SD crash when using
119 a Virtual autochanger.
120 kes Generate correct JobMedia records during spooling/despooling when
121 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
122 <tih@hamartun.priv.no> for excellent analysis and testing.
124 Beta release Version 2.2.9-b3
126 kes Rework certain SD locking based on gdb tracebacks of deadlocks
127 sent by Eric. This code now uses only the volume_lock() rather
128 than the reservations lock when at EOM and acquiring a new
130 kes Ensure only one exit point in several subroutines.
132 Beta release version 2.2.9-b2
134 kes Fix to initial tape drive open to release the volume name
136 Beta release Version 2.2.9-b1
138 kes Fix to JobMedia fix.
139 kes Fix bug pointed out by Peter Much that causes the StorageId to
140 be updated when reading a tape (during migration, it could have
141 been incorrectly set to the write StorageId).
143 kes Implement autostart scripts for Debian
145 kes Fix mtx-changer.in for broken Debian mt program.
147 kes Massive commit of all fixes and back ports to create 2.2.9
149 kes Apply doc fix from bug #1062.
150 kes Resolve crash and improper restore wx-console Win32 restore
151 GUI. Fixes bug #1065.
152 kes Update Win32 wxWidgets to latest version.
153 kes Attempt to do correct handling of Win32 mount points. Should
155 kes Fix Win32 FD backup/restore memory leak due to improper termination
156 of BackupRead/Write. This fixes bug# 1038.
157 kes Add const to AIX prototype for initgroups()
159 kes Undo bug #1047 heap overrun fix as it is not correct.
161 kes Fix creating first JobMedia record during Migration to include
162 proper index. This caused slow restores of migrated jobs.
164 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
165 and do not strip paths on symbolic links.
166 kes Set catalog backup database and user name from values specified on
167 the ./configure line.
168 ebl Apply patch to correct bug #1031, about wrong pool source information
171 Release Version 2.2.8
173 kes Apply patch from Martin to correct bug #1040, bscan sets existing
175 kes Fixed important spelling error in doc -- bug #1045.
177 kes Move initialization of read/write res lock earlier in the code.
178 This fixes the crash with a null conf file. This fixes bug
180 kes Redefine CURES in lib/parse_conf to be URES and move it all
181 into lib/parse_conf.c -- this responds to bug #1042, but does
182 not fix it. The fix is not to compile with FORTIFY_SOURCE.
183 kes Backport fix de-referencing a NULL pointer in the scanner from
184 the trunk SVN. I don't think this was reported as a bug.
186 Beta release Version 2.2.8
188 kes Re-enable the new job code editing (%f).
190 kes Fix bsnprintf for float point numbers. I broke recently when
191 parameterizing some variables. This fixes bug #1036.
193 kes Move Heartbeat documentation from Job to Director resource.
194 This fixes bug #1033.
196 kes Fix existing switch drive SD code to call autochanger to release
197 any old volume. This must be done to keep the autochanger from
198 releasing subsequently newly reserved volumes in doing a close().
199 This should possibly fix bugs #1032 and #1018.
200 kes Apply big backport of current SVN SD code that corrects a number
201 of race conditions. This is a first step in fixing bug #1018.
203 ebl Fixes bug #1028 where "Selection Type" option was not usable
207 Release Version 2.2.7
209 kes Partial back out (disabled) %f job code editing because it
210 does not build on Win32.
211 kes Fix seg fault Frank Sweetser reports in regression testing
212 on his systems. The problem was that the original author of
213 bsnprintf.c did not take into account the side effects of
214 using ++x in the argument to a #define.
216 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
217 that implements double quoting include names in conf files,
218 and also allows piping input by having the first character
219 be a vertical bar (|).
220 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
221 that implement %f in RunScripts to pass the FileSet name.
222 kes Skip leading | when lex input comes from a pipe as suggested
223 by Michael Stapelberg <michael@stapelberg.de>.
225 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
226 Nerijus Baliunas <nerijus@users.sourceforge.net>
228 kes This patch corrects a problem where the maximum concurrent storage
229 jobs counter gets out of sync during restore jobs causing jobs to
230 'wait on max Storage jobs'. This patch fixes bug #1009.
232 kes Add new include to postgresql.c suggested by Marc Cousins so
233 that it compiles correctly with pgre version 8.3. Also fix
234 misuse of %x with pointer (should be %p).
236 kes This patch fixes bcopy so that it produces correct Volumes.
238 kes This patch eliminates spurious output to the console during a VerifyVolume
239 job that contains encrypted data. It fixes bug #1024.
241 kes This patch prevents the 'status dir' command from trying to use a scratch
242 volume and possibly moving it from one pool to another. This patch fixes
245 kes Fix --archivedir addition to configure. Replace it with
246 --with-archivedir in configure.in This fixes the regression
248 kes This patch fixes bug #1012 where the job is canceled because
249 of Max Run Time exceeded when the job has not yet started.
251 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
252 one 'part' to write. Instead of each part being stored on disk,
253 written to DVD, then deleted from disk, all parts are written to disk,
254 and only the last is written and deleted from disk.
256 kes Correct typos in disk-changer.in
258 kes This patch fixes the status command to include the formating string for
259 JS_AttrInserting. It fixes bug #1021.
260 kes This patch should fix the Mac OS X build problem on the latest
261 Darwin, where sys/types.h was not included correctly (apparently
262 due to a change in the Mac headers). The solution was to explicitly
263 ensure that it is defined for the ./configure.
264 This patch also has a rebuild of configure that includes the Debian
265 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
266 kes This patch should ensure that queued messages to the console are
267 displayed as soon as possible. It should fix bug #1007, but has been
268 reported not to work.
270 kes This patch fixes the infinite loop when trying to increase the
271 maximum number of volumes in a Pool during the add command.
272 This patch fixes bug #1008.
274 Release Version 2.2.6
276 kes Get fix for joblist bug in bat from trunk.
278 kes This patch fixes bug #1003 where putting the message output from
279 a Verify job into the catalog results in a recursive loop. The problem
280 seems to show up only with postgresql (to be verified).
282 kes Fix bug #942 where lots of emails where generated when the heartbeat
283 interval was low and Bacula wanted a different tape from the one in
286 ebl Apply 2.2.5-lastwritten.patch to fix the LastWritten field
287 which was updated during a restore (or a reading migration) bug #982
289 ebl Use qmake-qt4 instead of qmake when available (debian system).
291 kes Add a security warning to src/cats/make_catalog_backup.in indicating
292 that passing the password via the command line (arg 3) is insecure.
293 This responds to bug #990 (it doesn't fix it).
294 kes Apply 2.2.5-postgresql-errors.patch
295 kes Remove unneeded File table index on JobId, which is already
296 present as the first index of another multi-index.
298 kes Set default debug_level to zero. This corrects bugs #991 and #993.
299 kes Fix a crash in bat when it cannot connect to the Director for example
300 if the Director is not running.
302 kes Activate Close button on tray-monitor window. This fixes
305 kes Fix spurious warning message printed when creating a volume with
306 a LabelFormat. This fixes bug #976.
308 Release Version 2.2.5
310 kes Add JobId in place of Job name in all the Jmsg() output.
311 kes Correct the APP_DESC for the Win32 storage service (remove an e).
313 kes Add new SD despooling attributes and Dir inserting attributes
314 job status codes. This fixes bug #961.
315 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
317 kes Fix doc issue. This fixes bug #963.
318 kes Fix listing performance problems in bat. Pointed out by
320 ebl Fix replace on restore. This fixes bug #969
321 kes Fix bat code that tests for Win32. This should fix bug #968
322 kes Query 5 list wrong Vol after migration. This fixes bug #960
324 kes Correct lib/Makefile.in to include enh_fnmatch.o that was removed
325 in back porting from 2.3.x
327 kes Backport almost 4000 lines of 2.3 code that fixes a number of bugs.
328 The details are included in the notes in this file.
330 kes Backport 2.3 code that fixes: it fixes incorrect or incomplete error
331 messages; it fixes a problem opening the SQLite3 database when multiple
332 simultaneous jobs were running; it fixes a bug with certain versions of
333 MySQL where batch inserts failed because of table name character case
334 (upper/lower) differences.
335 kes Fix race condition that drops final block written to volume.
336 This happens in rare cases with multiple simultaneous jobs
337 when the Volume fills. This fixes bug #964. May be related
338 to bug #935 and possibly #903.
340 kes Fix FD->SD authorization failure, which was due to spurious
341 wakeups from a pthread_cond_timedwait(). Simply check the
342 predicate before continuing. This fixes bug #953
343 dvl Add new configuration item --archivedir
344 dvl Adjust regression tests to use tmp not /tmp. This will allow
345 multiple concurrent runs of the regression tests.
347 kes Eliminate more strerror() and replace with bstrerror().
348 kes Remove BSD getopt and replace with unrestricted IBM version.
349 kes Fix Win32 build for changed calling sequences.
351 kes Fix FD->SD authorization failure, which was due to spurious
352 wakeups from a pthread_cond_timedwait(). Simply check the
353 predicate before continuing. This fixes bug #953.
354 kes Add const char where needed (more to do).
356 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
357 kes Don't overwrite error message in check_tables_version.
359 kes Unlock batch insert tables with same calls used elsewhere.
360 kes Allow starting 59 jobs a second.
361 kes Make SD session key more random.
362 kes Add retry for SQLite opening db if it fails. Probably helps
364 kes Suppress extra error messages during batch insert failure.
366 kes Put some FD auth code on dbglvl rather than fixed.
367 kes Return insert attributes error message in db msg buffer to avoid
368 false error messages. Helps fix bug #966.
369 kes Separate batch init error messages. Probably helps fix bug #966.
370 kes If Dir gets an error during inserting attributes, cancel SD.
371 This reduces unnecessary error messages.
373 ebl Cleanup batch insert code. Probably fixes bug #965.
375 kes Turn off some code when batch insert not enabled.
376 kes Edit FD name in connect error messages.
378 kes Add code to handle tray monitor separated from Win32 FD.
379 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
381 kes Fix ANSI tape labeling. This fixes bug #954.
382 kes Increase the max block size to 4MB fixes bug #957.
383 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
384 is not properly mounted (recognized) during a poll.
385 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
386 Job that has differences reports Verify OK.
387 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
389 Release Version 2.2.4
391 kes Increase size of name string when FD making connection to SD.
394 kes Add waits to multiple exit detection code to try to force pid
395 file to always be deleted.
396 kes Restore good dev.tar.gz to rescue set appropriate binary property.
398 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
399 trying to switch drives by checking for blocking before unblocking.
401 kes Cancel storage daemon in all cases where FD reports error. This
402 should fix virtually all cases of bug #920.
404 kes Fix error message that was clobbered when Dir tells SD it does not
405 have write permission on Volume. This should fix a minor point
406 in bug #942, but not the main problem.
407 kes Add code to cancel job in SD if FD connection fails. This should
409 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
410 kes Fix migration code to get correct Volume name with multiple volumes
411 by skipping |. Fixes bug #936.
412 kes Implement patch supplied by Landon to fix bug #944 where using
413 TLS with bconsole uses 99+% of the CPU.
414 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
416 kes Move patches into patches directory.
418 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
421 ebl Using 'm' in bconsole will show messages like before,
422 and not memory usage.
424 Release Version 2.2.3
425 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
428 kes Fix bug #935, and probably also bug #903 where files were not
429 restored. MediaId was not properly set in JobMedia record after
432 kes Add ./configure search in qwt-qt4 for qwt package
433 kes Apply Martin Simmons patch that should turn off the new API usage
434 when batch insert is turned off allowing building on older
437 Release Version 2.2.2
439 ebl Detect if new PosgreSQL batch insert API is present.
440 kes Correct incorrect mempool call causing Director crash.
441 sb Update spec files for 2.2.1 release
443 Release Version 2.2.1
445 kes Update POTFILES.in
446 kes Cleanup a few underquoted AC_DEFUNs in configure
447 kes Apply patch from Martin Simmons that adds a test for va_copy to
450 kes Fix bug #921 by increasing the number of tries to create a new volume
452 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
453 can be called multiple times. Implement a version for machines
454 without va_copy() that gets a big buffer.
456 kes Integrate more portable zone offset code into bsmtp.c
457 Submitted by Attila Fülöp.
459 kes Fix bad SD->FD return status reported by
460 (James Harper) <james.harper@bendigoit.com.au>
461 ebl Fix a bug in read_close_session which return random status
462 thanks to James Harper
464 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
465 and directory names during restore of single file/directories.
466 kes Add sanity checks to .sql command when string is empty. Hopefully
467 that will resolve Dirks Director crash.
469 kes Apply patch submitted by Martin Simmons that corrects a seg fault
470 in the bsmtp chat subroutine when debug is >= 10.
472 kes Fix Director crash when running bat SQL queries.
473 kes Add David's notes on Item 8: Copy pools.
475 kes Rework projects file to be current and ready for a vote.
476 kes Enhance lex scanner error message.
478 kes Tweak LICENSE file to mention BSD code.
479 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
480 if specified on the ./configure.
481 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
482 This class is intended to allow us to open a second bsock to the
483 Director while in the restore subdialog.
485 kes Fix configure to create bat Makefile before creating dependencies.
486 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
487 kes Add a tooltip to the tray monitor.
488 dvl Set the Director's PID file before dropping privs. This fixes
491 kes Update AUTHORs file
492 kes Increase the default max concurrent jobs to 20 in FD and SD to
493 correspond with the default .conf files.
494 kes Rewrite the Win32 service routines. This eliminates the 3 copies
495 some different, of the same file created by RN when porting the
497 kes Rearrange some of the Win32 directories and the placement of the files
499 kes Set DEVELOPER flag in version.h
501 ========================================================================
502 Release Version 2.2.0
504 kes Apply a second doc patch from Marc.
505 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
506 improves the tips section that discusses how to setup multiple
509 kes Update bat README file.
510 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
511 corrects a typo in the Recycle status check in db_find_next_volume().
512 This will probably fix a number of annoying problems with multiple
514 kes Modify most of dird/msgchan.c to use bsock class calls rather than
515 bnet calls -- no functionality change.
517 kes Modify the Verify output to specify if files are missing on
518 the Volume(s) or disk. Fixes confusion in bug #916.
519 kes When more than one Volume is read in a migration job, the last
520 Volume bytes reported are from the last read volume rather than
521 the last written volume. Fixed. This fixes bug #910.
522 kes Fix display of Recycle flag after update volume=foo recycle=yes.
523 It previously printed New Recyle flag is: no. This fixes bug
526 kes Correct seg fault when switching tape drives during restore.
527 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
528 be used until after 2.2.0 release.
530 kes Remove fnmatch() in SD that permitted wild card specifications.
533 kes Fix %g in filename returned by SQL for browse tree reported by
535 kes Fix configure so that it puts config.out in the cwd rather than
537 kes Attempt to fix the locking problem reported by Eric in bug #906.
538 kes Make berrno class to leave errno unchanged after constructor call.
539 kes Make bnet_server use the heap rather than the stack to allocate
540 its socket fd pointers to avoid a crash at termination. Problem
541 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
543 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
544 and putting it in depkgs-qt along with Qt4.3.
546 kes Rework code in acquire.c that switches drives for reading when
547 the Media Type does not match. This should fix bug #906
549 ebl Fix a director segfault during job setup #907
550 kes Correct seg fault in postgresql when first operation returns no
551 rows. Fixes Dirks File browser problem seg fault with bat.
553 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
554 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
557 kes Implement PopUp YES/NO dialog for bat.
559 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
561 kes Correct RunScript to terminate job in FD on failure.
562 kes Change abort_on_error and AbortJobOnError to fail_on_error
563 and FailJobOnError in RunScripts.
564 kes Minor tweaks of code formating in RunScripts, principally to
565 avoid depassing 80 columns.
567 kes Eliminate one #ifdef Win32 in bsmtp
568 kes Implement grow tool to grow a file for testing very large databases.
569 kes Add big-vol-test to test Bacula seeking with > 5GB.
572 kes Modify find_next_volume() to return all values in Media record.
573 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
577 kes Update Release notes
579 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
580 Warning, in previous beta version, all media get from scratch keep their
583 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
584 This should fix bug #842. Made a note to look at removing the temp
585 files at the end of the install.
586 kes Add ability to mount and unmount a file device providing it is
587 marked as being removable and has the appropriate mount and unmount
588 commands defined in the Device resource. This fixes bug #830.
589 kes When applying a storage override, release all previous storage
590 definitions rather than just prepending the new storage.
591 This should prevent a good deal of confusion.
593 kes Implement ./configure search for qwt libraries.
595 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
596 Win32 FD. This should fix bug #893.
597 kes Remove an unnecessary beep in Win32 init code.
598 kes Update copyright dates in Win32 executable about boxes.
599 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
600 code with a BSD getopt.c and getopt.h.
601 kes Remove sched.h from the Win32 compat directory -- not used.
602 kes Remove the Exit menu item from the Win32 tray monitor. If you really
603 need to shut it down, do it through the services panel or the command
605 kes Remove some inappropriate Bacula FSFE copyrights.
606 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
607 kes Fix regress config non-portable test as pointed out by
608 Florian Heigl <florian.heigl@gmail.com>
609 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
610 as pointed out by Florian Heigl <florian.heigl@gmail.com>
612 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
613 Reported by Frank Sweetser.
617 kes Fix client-only build.
618 kes Integrate client-only fixes for bsys (initgroups) and conio from
619 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
620 kes Make arguments to get_scratch_volume() in same order as other
622 kes Rework the prune_volumes() subroutine so that after purging and
623 no volume found in desired pool, it will check for a scratch
624 volume. This prevents recycling the whole scratch pool.
625 kes Add code to status storage to print boffset_t (largefile support).
627 kes Move qwt (Graphics libarary for Qt4) to depkgs.
628 kes You now need a --with-qwt=<dir> to be able to build bat.
629 kes Update src/win32/cats/bacula_cats.def to include the new
630 db_get_query_dbids() call on Win32.
632 kes Correct a problem when selecting a scratch volume and moving
633 it to another pool that lost some columns.
634 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
635 kes Enhance Autochanger error messages to include Volume and device name.
636 kes Rework prune_volumes() code to take account of InChanger flag,
637 and to handle recycling volumes going to the Scratch pool and
638 current pool because the RecyclePool directive.
639 kes Implement a better and more efficient db_get_query_dbids() to
640 handle creating and passing back a list of DBIds.
644 kes Start work on new more efficient DBId subroutine. First use
645 will be for recycling volume to Scratch inchanger.
646 kes Increase number of JobIds in pruning from 1000 to 10000.
647 This to be replaced by above routine.
648 kes Begin implementation of building Qt4 on Win32.
649 kes Correct typo in fix I added for bad TLS shutdown.
650 kes Pull 2.0.3 patches into patches directory.
651 kes Update Release notes. Include qt-console in line count.
652 kes Update Projects file.
654 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
655 bug in migration code where a job that spanned two volumes
658 kes Implement new BST_DESPOOLING blocked state. Change from locking
659 during despooling in SD to blocking. This means that other threads
660 can work with the device structure, in particular the reservations
661 system while despooling.
663 kes Fix return in reservation message queue that missed clearing
664 the jcr lock (implemented 26Jun07 below).
665 kes Rename a number of dev methods to make locking function names
667 kes Document locking in lock.c. Move lock structures to new file
670 kes Move reservations message lock to lock jcr only this
672 kes Move main SD locking code into lock.c (new file).
673 kes Update Win32 build to include lock.c
677 kes Dirk committed the qwt library code for drawing graphs in bat.
678 kes Tweak install of qwt so that it is integrated with ./configure.
680 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
681 out by Eric (my typo).
682 ebl Fix configure.in to get batch mode enable
683 kes Return correct string from authenticate.cpp in bat when connecting
685 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
686 spurious line drops when using TLS.
687 kes Do not file reparse points when restoring a file that already
690 kes Implement Windows reparse points -- similar to directories, but
691 we do not descend into it. This is a first cut. They seem to
692 be backed up, but restore is not yet tested.
693 kes Remove restore_blocking in tls code when shutting a socket to leave
694 it in blocking mode. Hopefully this will fix the encryption bug
695 reported by Frank Sweetser.
696 kes When opening a file for backup, tell the OS that we are going to
697 read it sequentially -- optimization.
698 kes Change variable names in authenticate_director() to not conflict
699 with member names in bat. Caused great confusion with compiler,
702 kes Queue openssl error messages in case of comm problem.
703 kes Do shutdown() call if socket terminated.
704 kes Remove some duplicated code in tls.c
705 kes Move more of the bsock member variables into private and access
707 kes Add Frank Sweetser's tls-test to the regression suite.
709 kes Add Swedish sv.po file
711 kes Don't print clock skew message in FD if less than 3 seconds diff.
712 kes Add a bit of VSS info to status client.
713 kes Implement a first cut of Vista VSS, using Win2003 code.
717 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
718 loaded tape but uses first drive).
719 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
720 This was indeed a Win32 issue.
722 kes Simplify search of autochanger for in-use Volume.
723 kes Fix exit condition of check for in-use volume. kes Remove
724 inappropriate my_postgresql_free_result() in db_close()
726 kes Fix bad return in FD when encryption signature not found.
727 Probably caused a crash.
728 kes Inhibit missing encryption signature error messages for
729 file types where no signature computed.
730 kes Correct inverted check on autochanger in reservation system.
731 kes Tweak debug code in autochanger reservation.
733 kes Add some additional locking in the cats directory in subroutines
734 that modify packet variables called from batch insert.
735 kes Rework how dcrs are allocated. new_dcr() can now be called
736 with an existing pointer, and it will simply clean it up.
737 This allows the reservation system to test various different
738 devices, and will permit easy device changes.
739 kes A bunch of changes all over to handle new new_dcr() calling
741 kes Work more on the Volume management in the SD. Remember Volumes
742 for tape drives and for autochangers (even virtual disk changers).
743 kes When looking at the Volume list to reserve a drive, handle
744 autochanger names correctly by interating through the changer
745 devices. Also call the Director to see if a Volume is suitable
747 kes Fix some bugs in bscan. Make sure all media records are written.
748 Make sure that valid JobMedia records are written for disk files.
749 Previously they were completely wrong.
750 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
751 that the URLs don't change and so that the developers will all
752 work off the same copy. Rebuild from scrach.
753 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
757 kes Fix seg fault in FD from incorrect digest size.
758 kes Fix argument to non-OpenSSL crypto.c subroutine.
762 kes Remove a few malloc()s from the encryption code.
763 kes Use the class calls to bsock in filed/backup.c and restore.c in
764 place of the old bnet_xxx code.
765 kes Implement code that does an on the fly calculation of the
766 signing digest during restore of encrypted files. It makes
767 a best guess at the algorithm, and if it is not correct, will
768 then revert to the old code which reads the file after it is
770 kes Implement at least one missing crypto stream in stream_to_ascii()
771 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
772 #877 where a reload with bad syntax causes Dir to exit.
774 Cut: 2.1.14 beta (not released)
776 kes Do not free a volume on a tape drive until another volume is
777 mounted and read, or the autochanger unloads the volume.
778 This should help the SD re-use volumes that are already mounted,
779 and should fix bug #886.
780 kes Apply patch from user brettedgar that allows gnome2-console include
781 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
782 kes Apply patch from Lucien Weller that fixes day of week calculation
783 because of DST flag problem. Fixes bug #887.
785 kes Move find_next_appendable_volume() to after acquiring a valid device
786 in reserve.c. This fixes bug #864 -- confirmed by reporter.
788 kes Unable to reproduce bug 872. However added additional testing for
790 kes Bug #874 resolved by documenting SQLite limitations.
791 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
792 kes Bug #881 resolved by removing typo in mtx-changer script.
793 kes Made Frank Sweetser's wiki the official Bacula wiki with his
794 approval. Added a link to the wiki on the web page, and implemented
795 a backup from http://paramount.ind.wpi.edu
797 kes Fix update allfrompool to pass pool name.
799 kes Convert to pure GPL v2 license.
800 kes Fix sscanf problems reported by Peter Buschman that caused
801 a bus error on Solaris.
802 kes Rework (simplify) the select prompt in bat.
803 kes Move get_jobid_from_tid() into lib and create a
805 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
806 should definitely fix the problem of lost error messages in the
808 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
809 kes Eliminate tcpd.h from the project. Enclose the #include from the
810 library with extern C ...
811 kes Add print of signal name when a signal is trapped.
815 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
817 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
818 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
819 makes SQLit3 run 30 times faster, though a bit less safe.
820 kes Implement --with-batch-insert in configure and detection of thread
821 safe libraries. It is on by default, but turned off if no thread
822 safe library (e.g. SQLite 2) is available.
824 kes Fix Bacula PostgreSQL buffer overruns.
825 kes Do better checking for NULL results returned from PostgreSQL;
826 implement retry for failed queries; clear results buffer after
827 failed query. Hopefully this will correct the PostgreSQL failures.
829 kes Implement algorithm to handle only one appendable volume with
830 Prefer Mounted Volumes = no.
831 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
832 returned from a query.
833 kes Make volume lock recursive.
834 kes Implement an additional volume reservation algorithm that
835 starts by considering all reserved volumes then uses the
836 old brute force algorithm of searching the resources to
837 find a suitable device.
838 kes Add new reservations debug code and refine the old code.
839 kes Update the win32/dll/bacula.defs file.
841 kes Tweak reservations algorithm to permit a few more cases, i.e.
842 volume reserved, but on different drive, ...
843 kes Enhance SD status to include Pool and Media Type for drive in a
844 more readable format (a bit longer).
845 kes Fix PostgreSQL double free.
847 kes Minor refactoring of restore decryption code.
848 kes Add code to smartall.c to detect double free of a buffer.
850 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
851 so that bsmtp will create a correct email address (mailbox only).
852 kes Modify 'memory' command so that the buffers are listed as 'In use'
853 to avoid confusion with Orphaned buffers.
854 kes I reworked the OpenSSL include/lib flags to be handled in
855 the standard Bacula way, which should fix bug #863 concerning
856 non-standard OpenSSL libraries.
858 kes Implement Help Browser window for bat.
859 kes Fix reload bug that reset StorageId to zero.
861 kes Fix TLS #ifdefing when TLS turned off.
862 kes Ensure that when labelling a tape with Slot=0 that InChanger
864 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
866 kes Add StartTime to final uar_sel_jobid_temp query so that we can
867 add DISTINCT (required by PostgreSQL).
868 kes Implement BSOCK authenticate_director() method. Eventually will
869 authenicate all daemons.
870 kes Move several more functions into the BSOCK class.
872 kes Add code to tell the OS that we no longer need a cached
873 file that we were reading. In findlib/bfile.c. Also,
874 only cache files that we are reading. Thanks to
875 Tobias Oetiker <tobi@oetiker.ch> for the idea.
876 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
877 kes Implement script to automatically generate cats and dll .def
879 kes Update README.mingw32 to include new .def file generation.
880 kes Correct typo in UTF-8 error message as reported by:
881 jhernandez <julianhernandez@gmail.com>
882 kes Add additional sm_check() code on debug level 1.
883 kes Set default debug level to 1.
884 kes Trap SIGABRT in attempt to get traceback.
886 kes Reduce bat connect timeout from 30 to 15 seconds.
887 kes More restructuring and implementing BSOCK class in place of
889 kes Remove a few unnecessary malloc() tests in crypto code.
890 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
891 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
892 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
894 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
896 kes Fix Verify InitCatalog. The attributes were not pointing to the
897 correct saved location.
898 kes Implement message callback so that GUI is sure to get all
899 daemon messages. Currently displayed in a dialog in bat.
900 kes Ignore SIGUSR2 (Bacula timer) in bat.
901 kes Apply regress patch from bug #859 to allow regress to work
902 with Solaris compiler.
904 kes Begin adding TLS support to bat.
905 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
906 clean up lex.c and make it more readable.
908 kes Move more bnet functions into the BSOCK class.
909 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
910 kes Complete change of berrno strerror() method to bstrerror()
914 kes Cleanup incorrect email addresses in bsmtp.
915 kes Make bat display initial messages rather than discard them.
917 kes First cut of adding .mod to the run command.
918 kes Implement auto display of messages in bat.
919 kes Enhanced preferences to allow all Bacula output to be
922 kes Try to make bsmtp date routines more generic.
923 kes Fixed bug #856 autochanger documentation.
924 kes Rework bsmtp date editing for Win32. This fixes bug #854.
925 kes Add new cats entry point so Win32 builds.
927 kes Attempt to fix bsmtp date editing on OSes without %z editing.
929 kes Do better checking for the MySQL 64 bit libraries looking for both
930 .a and .so libraries.
931 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
932 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
933 kes Require the thread safe version of MySQL during configure. Thanks
934 to Andre Noll for pointing this out.
935 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
936 continuing in migration code.
937 kes Apply implementation of tray-monitor font derived from gnome-console
938 submitted by Andreas Piesk <a.piesk@gmx.net>
940 kes Eliminate important memory loss in SQLite
941 kes Fixed the batch insert MySQL thread specific data that was not
942 being freed. See cats/mysql.c:db_thread_cleanup().
943 kes Fix restore before command.
944 kes Convert old hdr.name to name() in a few places.
945 kes Implement update jobid command.
946 kes Return all time_t dates in db_get_job_record()
947 kes Stop watchdog in SD earlier.
948 kes Put Pool just after Storage in please mount message.
949 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
952 kes Update the po files.
953 kes Fix Verify InitCatalog by making it cache attributes.
955 kes Change name bacula-bat to bat for man 1 page to correspond to
957 kes Check for client and store NULL pointers in status command. This
959 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
960 kes Fix sign extended editing of %p.
961 kes Clean out a little old #ifdefing in cats/mysql.c
963 kes If time diff between DIR and FD is more than 600 seconds convert
964 INFO message to WARNING.
965 kes Implement heap size display in status for all daemons.
966 kes Attempt to fix MySQL db open memory loss (not successfull).
967 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
968 kes Eliminate memory loss in MySQL (possibly other SQLs) during
969 Query. This looks like a MySQL but but by doing extra releases,
970 the memory goes away. This should fix bug #847.
972 kes When backup fails, cancel SD before waiting for sd termination.
973 kes If SD is waiting for FD to connect during cancel, wake up the
975 kes Fix fsf code so that errno is correctly reported.
976 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
978 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
979 so that Bacula doesn't later stumble into a seg fault.
980 kes Use the term Restore Client in the restore Job report.
981 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
982 the original job's FileSetId.
983 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
984 spooling in migration jobs. Not yet tested.
985 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
986 reading conf file from a pipe. However, do it with open_bpipe()
987 rather than popen. Not yet tested.
989 kes Fix an ugly bug where the VolCatBytes were getting updated
991 kes Implement bconsole memory command that prints current memory
992 usage, plus smartalloc dump.
993 kes Clarify some error messages in backup, admin, and migrate.
994 kes Shrink label dialog to smaller size.
995 kes Invert Cancel OK buttons on restore to be OK Cancel.
996 kes More strerror() to bstrerror() conversions.
998 kes Start implementing bstrerror() in place of strerror().
999 kes Stripping path -- seems to work.
1001 kes Prevent door and port files from being restored (mostly
1003 kes Free an unreleased buffer in compat code.
1004 kes Change console Job name from *Console* to -Console- to eliminate
1005 Win32 filename problems. Put Win32 path separator when creating
1006 Console file. This fixes bug #846.
1007 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1009 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1011 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1012 to force Win32 error message.
1014 kes First cut strip path. The data should be passed to the FD,
1015 but nothing is done with it yet.
1016 kes Enhance the digest and signature routines in the crypto
1017 library to accept a JCR and to use it to print error messages
1018 so that they will go in the Job report rather than the daemon's
1020 kes Simplify some of the verify signature code.
1021 kes Simplify a few of the alternative returns in the signature
1024 ebl Use only POSIX regex instead of GNU regex in breg.c for
1025 File relocation. It fix broken freebsd compilation.
1026 kes Convert all other Dir files to use new ua class message
1028 kes Tentative fix for missing digest signature in bug 807.
1029 kes Correct handle problem in new win32_ftruncate routine.
1030 kes Convert ua_purge.c and ua_update.c to use new ua class
1031 message routines for bat.
1033 kes Correct incorrect installation of LICENSE in Win32 installer.
1034 kes Display LICENSE at the beginning of the Win32 install.
1035 kes Attempt to correct the need for the png files to be installed
1037 kes Reapply my bat.conf install script in qt-console. I think I
1038 editted bat.pro instead of bat.pro.in and it was lost.
1039 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1040 the /var/lock/subsys for subsysdir. Also corrects typos in the
1043 kes First cut update job.
1044 kes Correct configure to include qmake of src/qt-console directory.
1046 kes Make restore job yes/mod/no print in one command so GUI works.
1047 kes First cut implementing backup and restore client.
1048 kes Correct editing in Verify output that caused a seg fault.
1050 kes Insure that bat.conf is not overwritten during installation.
1051 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1052 while I was implementing migration in March 2006 !
1054 ebl Cleanup file relocation, using char *RegexWhere instead of
1055 char *where + bool where_use_regexp
1056 kes Update some manpages and add bat manpage.
1057 kes Make a first cut at converting bacula.spec.in for bwx-console
1059 kes Apply patch from John Goerzen to add hostname as fourth argument
1060 to make_catalog_backup script.
1061 kes Fix typos I introduced into bsmtp.c
1062 kes Make pm_strxxx() routines handle input of NULL pointer. This
1063 is to protect from NULL pointers returned from SQL databases.
1064 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1065 kes Add more debug to FIFO code -- fix fifo regression test.
1067 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1068 kes Add thread timer to bnet_connect() to break from OS if wait time
1071 kes Update Win32 build to include new files, new symbols, and
1073 kes Implement socket level heartbeat (tcp_keepidle)
1074 ebl Commit File relocation patch
1075 kes Make bat have 'make install' target.
1076 kes Warn during install if old gnome-console binary found.
1077 kes Warn during install if old wx-console binary found.
1078 kes Add -8 option to bsmtp command line to add content type utf-8.
1079 Fixes bug #809. (Character coding problem in bsmtp).
1080 kes If < is found in target (from, to, cc) then do not enclose the
1081 target in < > in bsmtp. Fixes bug #772 (malformed address).
1082 kes When printing certain items in dbcheck, stop after 300000.
1083 Fixes bug #822. (dbcheck loops).
1084 kes Incorrect status in Dir after waiting for mount with poll set.
1087 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1089 kes Print waiting to reserve a device every 5 mins.
1091 kes Don't call close_part in label.c if tape and relabel.
1092 kes Don't free volume if busy in close() -- should help with
1094 ebl Fix #824 RunScript bug (After script could be execute twice)
1095 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1096 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1097 Add a regression script to test RunScript
1099 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1102 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1103 deprecated. No additional bugs will be fixed, and they will be dropped
1104 in a future release (probably 2.4.0).
1105 kes Change name of wx-console to bwx-console to make it more Bacula
1107 kes Change the name of gnome-console to bgnome-console to make it
1110 kes Some time in March, a Feature Request with patch from Jorj Bauer
1111 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1113 The ability for the director to validate a Client (FD) CN against
1114 an arbitrary set of patterns rather than the hostname, with
1115 A new 'TLS Allowed CN' set of directives which are implemented
1116 in the Client resource. Then pattern matching is used in place
1117 of hostname matching against the Certificate's CN. As an example, we
1118 have certificates which (a) use a local CA, and (b) have a CN of the
1120 kes Add new/changed entry points to Win32 build
1121 kes Create unaccepted-projects for projects that are not accepted.
1122 kes Simplify locking in the reservations system.
1123 kes Add more debug code in reservations.
1124 kes Make sure error condition on reserving a volume is handled correctly.
1125 kes Correct handling of volume_in_use.
1126 kes Correct handling of initializing a device.
1127 kes Move handling of broadcasting releasing a device into release_device().
1128 kes Correct attaching dcr to dev so that it is only done if device
1129 is properly initiated.
1131 kes Locking debug level tweaks in SD.
1132 kes Tweak new Volume code.
1134 kes Add exec external-command [wait-seconds] to bconsole. This
1135 executes the external-command. Note! normally external-command
1136 should be enclosed in double quotes.
1137 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1138 it should normally be off in a production system.
1140 kes Implement die command for SD so that we can force it to dump.
1141 kes Implement SD lock debug code.
1142 kes Implement new algorithm for keeping Volume list in SD. It
1143 is now owned by the device.
1145 kes Implement new code for freeing in use volumes that should
1146 resolve if not all, some of the problems of multiple drive
1147 tape conflicts described in bug 801.
1149 kes Fix gui/bacula-web/images files in svn.
1150 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1152 ebl Fix a bug in batch mode (in string escape)
1153 kes Correct migration prune SQL typo that crept in in a
1154 recent 2.1.x change.
1156 kes Move bnet_despool() into class in bsock.c
1157 kes Modify job report to include director name and Build OS.
1158 kes Move drop root privilege and check_catalog() before fork.
1159 kes Add update database scripts (version 9 to 10) to updatedb directory.
1161 ebl Check size and age of each file after its backup to see if
1162 it has changed during backup, if 'checkfilechanges' is set.
1163 The FD will do an extra check (stat(2)) after
1164 each file backup. mtime, ctime and size are compared with
1165 'before backup' information. If time or size mismatch, an
1166 error message will be generated. You must upgrade FD to use it.
1168 kes Make database name and user configurable
1169 --with-db-name=xxx --with-db-user=xxx
1170 kes Add back database type to message.c for debugging.
1172 kes Implement dir_sql() which issues an SQL query.
1173 kes Modify bat medialist to use dir_sql() and do some minor C++
1174 formatting as well as eliminating a number of pointers, simplifing
1177 kes Fix some of the mtx-changer grep commands for tape label readers.
1178 kes Convert a number of bsendmsg into the appropriate send/warning/error
1179 message class calls.
1180 kes Suppress the using database message in the .sql command.
1181 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1183 kes Add context menu for floating a window.
1184 kes Some minor cleanup and name changes in qt-console
1185 kes Add doing mt setblk 0 in Win32 mtx-changer.
1186 kes Apply Martin's bug fix to move definition of ENODATA for
1188 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1189 sqlite2 and sqlite3.
1191 kes More pruning cleanup.
1192 kes Turn on wait_for_drive by default in mtx-changer.
1193 kes Turn on Batch insert code by default as it now passes regression.
1194 kes Add ./configure --enable-bat to enable building of Bat.
1195 No install yet though.
1197 kes Implement a new .sql command for bat.
1198 kes Implement code to turn off pruning in obtaining the next volume.
1199 Pruning is turned off for the status dir command, but turned on
1200 for SD requests and for the list nextvolume command.
1202 kes Correct Qmsg() that was not updated correctly when committing a
1203 previous change (probably the recent TLS patch).
1205 kes Write new subroutine is_volume_purged() that explicitly checks
1206 if the Volume is purged, and if so marks it as such. This should
1207 resolve problems reported about needing to mount twice to recycle
1209 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1210 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1211 amount of duplicated code.
1212 kes Do volume pruning only for the Media Type desired (reduces pruning time
1213 if multiple Media Types are in the same pool).
1214 kes Implement more detailed info in the Job report for the Bacula version
1216 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1218 ebl Add bbatch tool to bench database and insert mode.
1219 Fix sql quote stuff in batch mode
1220 Fix sql stuff for mysql
1222 kes Correct problems with am/pm scheduling. Fixes bug #808.
1223 kes Implement new prunning code that prunes up to 1000 jobs at
1224 the same time. The same technique can be applied to a number
1225 of other prune/purge subroutines.
1226 kes Add an insanity check when starting a new tape job to ensure
1227 that the tape position has not been changed. If so fail the
1229 kes Fix Win32 build for dlls to add the folllowing:
1230 src/lib/bsock.c -- new file with new entry points
1231 src/lib/dlist.c -- new entry points
1232 src/cats/sql_create.c -- new entry point
1233 src/cats/sql_cmds.c -- new DATA item exported
1235 ebl batch mode cleanup bscan-test is ok now.
1236 kes Implement SD code to check length of disk volume before appending.
1238 kes Correct return status on db_batch... routines.
1239 kes Add call to db_write_batch_file_records() to migration code.
1240 ebl Fix AfterJob timing
1241 kes Move the checking of the database in initializion of the Director
1242 to after we drop privileges. This avoids the need for both root
1243 and bacula access to the DB.
1244 kes Correct a misplaced variable definition in src/filed/backup.c
1245 kes Correct how the new batch insert db_create_attributes_record()
1246 uses the arguments. Caused a seg fault in bscan.
1247 kes Implement lock() and unlock() methods in DEVICE class.
1248 Implement block() and set_block(xx) methods in DEVICE class.
1249 kes Modify bnet_connect() so that it uses time() to check for the
1250 wait time expiring (on some OSes, some system calls may not
1251 return immediately).
1252 kes Modify Verify to obtain the previous JobId when it is actually
1253 running rather than at schedule time (as it was in 1.38.x).
1254 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1256 kes When checking pid in pid file, continue running if the pid is
1257 the same as ours. This occurs on IRIX after a system crash.
1260 kes Extend new GUI API.
1261 kes Make the ua structure a class, and implement send_msg(),
1262 error_msg(), warning_msg(), and info_msg().
1264 kes Apply fix from for building wx-console on the Mac from
1266 kes Implement new select mechanism for GUI programs.
1267 kes Reorganize initialization of stackedWidgets in bat.
1269 kes Add updated nagios plugin supplied by Christian Masopust.
1271 kes More bat implementation.
1272 kes File migrate bug with Pool Occupancy using mediaid instead
1273 of jobids. Fixes bug #795.
1274 kes Fix orphaned buffers in filed backup and verify due to
1275 crypto buffers not freed during errors. Fixes bug #789.
1276 kes Extend new GUI api code to tree commands.
1277 kes Ensure that tree and dot commands check console ACLs.
1278 kes Permit marking directory with trailing slash.
1279 kes Allow 20 console connections (instead of only 10).
1281 kes Add smartctl call to bacula-sd.conf as an example of getting
1284 kes Modify jobq.c to let simultaneous restore jobs run. This may
1285 cause them to fail if they cannot get a drive.
1286 kes Add Client Connect Wait to Storage daemon to permit users to
1287 modify the time the SD waits for a FD connection.
1289 kes Correct virtual changer check which was backwards. This caused
1290 volumes to be unloaded into slots already occupied.
1292 kes Apply Command ACL filter to JobId list in restore command.
1293 kes Correct typeo in var.c patch.
1295 kes Don't let Bacula prune File or Job records for the current Job.
1296 kes Fix variable substitution pad + inc bug reported (with patch)
1299 kes Correct SQLite log table index as reported by Luca Berra.
1301 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1303 kes Begin implementing new comm signals for API.
1304 kes Fix a few places in lib/message.c where the open fd may
1306 kes Continue implementing lib/bsock.c (real class). Make jcr,
1307 who, host, and port private. There are new methods to access
1308 them for non-class use. This required touching a number of files.
1310 kes Add LANG=C to autoconf/randpass so it works with languages other
1311 than English. Fixes bug #788.
1313 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1315 You will not be able to generate Include/Exclude list any more.
1316 It will be fixed soon.
1317 If you want to use this, you can apply
1318 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1320 kes Restore of sockets created false error messages because Bacula
1321 no longer restores sockets, but the code was still trying to
1322 set the attributes on a non-existent file. Reported by a user.
1323 ebl finish RecyclePool feature
1324 Media will takes Pool.RecyclePool
1325 when moving from Scratch to a Pool or when user will do
1326 update volume=xxx frompool
1327 To use it, add RecyclePool = aPool to your Pool resource
1330 RecyclePool = Scratch
1334 kes Expand new BSOCK class adding signal() and new BNET signals.
1335 kes Begin enhancing the dot commands adding a new API function
1336 that returns more information and will make it easier
1337 to interface to the Director from a program.
1339 kes Make DEVICE fd private. Its new name is m_fd, and can be
1340 obtained with dev->fd() outside the class. This is the
1341 first of many DEVICE members to be made private.
1342 kes Implement Michael Renner's idea on having a virtual disk
1343 changer. I made some minor modifications (e.g. I did not
1344 implement the Virtual Changer directive, but simply set
1345 the Changer Command to an empty string.
1347 kes Implement a BSOCK send() method that writes the whole record
1348 in a single write() request rather than in two.
1349 ebl add update volume=xxx recyclepool=yyyy
1350 volume takes recyclepool from pool when using update volume=xxx from pool
1352 kes Fix encryption deblocking bug, which caused some restored files
1353 to be truncated. This fixes bug #763.
1354 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1355 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1357 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1358 ebl Use btime_t instead of uint64_t in media patch.
1360 kes Optimize the use of the database a bit in the Status dir command.
1361 Only open it when needed, ensure that if any previous database
1362 was opened, it is closed.
1364 kes Correct VolCatBytes bug from media patch.
1365 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1366 in the case of orphaned records.
1367 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1368 and File records in 300K chunks to be more efficient. This
1369 idea came from Juan Luis Frances (if I remember right).
1370 kes Apply Eric's scratch patch that moves a purged Volume to
1371 the RecyclePool. Question: how is RecyclePool set? what
1372 happens to the ScratchPool?
1373 kes Apply Eric's media patch that collects read/write media
1374 times as well as byte counts. This patch requires a
1375 simultaneous upgrade of the DIR and SD. Note, there
1376 should be some way to turn off timing. I'm not sure
1377 times are in Bacula units.
1378 kes Apply Eric's batch-insert patch.
1380 kes Update projects list.
1382 kes Implement Include/Exclude file lists in FD as dlists using
1383 the new dlistString class. This permits efficiently having
1384 large include/exclude lists and completes project Item 25.
1385 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1386 console is authorized to cancel the job. This fixes bug
1388 kes Modify SD so that the VolCatJobs medium record is updated
1389 at the beginning of a Job rather than the end. This
1390 fixes bug #775 where exceeding MaxVolJobs caused jobs
1392 kes Added a mutex around getting and setting Volume information
1393 so that multiple simultaneous jobs will single thread.
1395 Switch to using Subversion
1396 kes Remove src/pygtk-console/ from configure
1398 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1399 plus the entrypoints.
1400 kes Apply patch supplied that corrects debug print
1401 in canceling jobs for max run time. Supplied as
1402 part of bug #621, which was previously fixed.
1404 kes Test on job_canceled() and sd_msg_thread_done inside
1405 loop starting the message thread to avoid a race condition.
1407 kes Remove rl_catch_signal from console.c as it conflicted
1408 with the header definition. Fixes bug #765.
1409 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1411 kes Clarify some stored/acquire messages to indicate if the
1412 problem is with read or append.
1414 kes Fix memory leak with storage ids in cats/sql_get.c
1415 kes Terminate watchdog earlier to avoid reference to released
1416 memory -- reported by Jason Austin.
1417 kes Move closing the database from jobq.c to the director daemon
1418 termination routine. This fixes memory leaks for shadow jobs
1419 (i.e. migration jobs).
1420 kes Free up the unique jobid chain items in migrate.c. This fixes
1421 a memory leak problem.
1422 kes Convert some ugly looking for statements to use foreach_alist
1423 in findlib/find.c. This will facilitate converting the structures
1424 to use dlist (for large include/exclude lists).
1425 kes Fix a bug in the btree.c and btree.h routines, then rename them
1426 rblist and add them to be built in src/lib. Include some new
1427 methods written by Rudolf Cejka that make the code more readable
1428 (hides some of the ugly casting).
1429 kes Add set_next() and set_prev() methods which make the code much more
1430 readable. Also add a new dlistString class that facilitates storing
1431 strings in dlists. To be used in the large include/exclude lists.
1432 kes Make some trivial modifications to lib/tree.h that use rblist
1433 rather than dlist for storing the tree links. This was suggested
1434 by Rudolf Cejka. The result of this is that the restore tree now
1435 uses red-black binary trees rather than simple linked lists. This
1436 should give rather dramatic speed improvements for directories
1437 contining large numbers of directories/files (more than 10000).
1439 kes Fix maxruntime bug #621.
1441 ebl Implement the include JobID in spool file name project.
1442 kes Reorder projects file in order determined by Jan 2007 vote.
1443 kes Implement item #12 on project list -- quick release of FD by
1445 kes Fix open of SQLite3 db where user does not have write permission
1446 so that DIR does not crash. Fixes bug #761.
1448 kes Add back missing @ in Win32 Makefile.
1449 kes Change 'Device not configured to autolabel' from INFO
1451 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1452 which should restart an indefinite # of times.
1453 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1454 other DIR specifications.
1456 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1457 Fix path quoting in SQLite scripts.
1458 Fix problems with SHGetFolderPath.
1460 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1462 kes Fix Job restart on error bug that promotes an Inc to a Full
1463 backup. This should fix bug #755.
1464 kes Add qt-console and first cut of code.
1468 kes Fix Bacula->Documentation link on Win32 to point to index.html
1469 instead of bacula.html. Fixed bug #750.
1470 kes Return JobId in db_get_job_record() when JobId==0. This should
1472 kes Do not release source pointers when restarting a failed job.
1474 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1475 This *should* fix bug #747.
1476 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1479 kes Modify USTORE constructor to set an empty store_source string,
1480 and don't copy the store_source string in a cancel. Hopefully
1481 this will fix Arno's seg fault, bug #744.
1482 kes Add back code to disable conio in configure. Fixes bug #743.
1483 kes Correct the Options scanner in the FD to correctly handle
1484 SHA1 option, which was eating the next option. Reported by
1486 kes Add code to indicate when the SD is spooling, spool wait, and
1487 despooling as requested by Alan Brown.
1489 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob