1 Technical notes on version 2.2
5 kes Apply 2.2.4-poll-mount fix, that resolves bug ##908 where a tape
6 is not properly mounted (recognized) during a poll.
10 kes Increase size of name string when FD making connection to SD.
13 kes Add waits to multiple exit detection code to try to force pid
14 file to always be deleted.
15 kes Restore good dev.tar.gz to rescue set appropriate binary property.
17 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
18 trying to switch drives by checking for blocking before unblocking.
20 kes Cancel storage daemon in all cases where FD reports error. This
21 should fix virtually all cases of bug #920.
23 kes Fix error message that was clobbered when Dir tells SD it does not
24 have write permission on Volume. This should fix a minor point
25 in bug #942, but not the main problem.
26 kes Add code to cancel job in SD if FD connection fails. This should
28 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
29 kes Fix migration code to get correct Volume name with multiple volumes
30 by skipping |. Fixes bug #936.
31 kes Implement patch supplied by Landon to fix bug #944 where using
32 TLS with bconsole uses 99+% of the CPU.
33 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
35 kes Move patches into patches directory.
37 ebl Fix bug #946 about "bacula-dir -t" which doesn't works
40 ebl Using "m" in bconsole will show messages like before,
44 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
47 kes Fix bug #935, and probably also bug #903 where files were not
48 restored. MediaId was not properly set in JobMedia record after
51 kes Add ./configure search in qwt-qt4 for qwt package
52 kes Apply Martin Simmons patch that should turn off the new API usage
53 when batch insert is turned off allowing building on older
58 ebl Detect if new PosgreSQL batch insert API is present.
59 kes Correct incorrect mempool call causing Director crash.
60 sb Update spec files for 2.2.1 release
64 kes Update POTFILES.in
65 kes Cleanup a few underquoted AC_DEFUNs in configure
66 kes Apply patch from Martin Simmons that adds a test for va_copy to
69 kes Fix bug #921 by increasing the number of tries to create a new volume
71 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
72 can be called multiple times. Implement a version for machines
73 without va_copy() that gets a big buffer.
75 kes Integrate more portable zone offset code into bsmtp.c
76 Submitted by Attila Fülöp.
78 kes Fix bad SD->FD return status reported by
79 (James Harper) <james.harper@bendigoit.com.au>
80 ebl Fix a bug in read_close_session which return random status
81 thanks to James Harper
83 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
84 and directory names during restore of single file/directories.
85 kes Add sanity checks to .sql command when string is empty. Hopefully
86 that will resolve Dirks Director crash.
88 kes Apply patch submitted by Martin Simmons that corrects a seg fault
89 in the bsmtp chat subroutine when debug is >= 10.
91 kes Fix Director crash when running bat SQL queries.
92 kes Add David's notes on Item 8: Copy pools.
94 kes Rework projects file to be current and ready for a vote.
95 kes Enhance lex scanner error message.
97 kes Tweak LICENSE file to mention BSD code.
98 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
99 if specified on the ./configure.
100 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
101 This class is intended to allow us to open a second bsock to the
102 Director while in the restore subdialog.
104 kes Fix configure to create bat Makefile before creating dependencies.
105 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
106 kes Add a tooltip to the tray monitor.
107 dvl Set the Director's PID file before dropping privs. This fixes
110 kes Update AUTHORs file
111 kes Increase the default max concurrent jobs to 20 in FD and SD to
112 correspond with the default .conf files.
113 kes Rewrite the Win32 service routines. This eliminates the 3 copies
114 some different, of the same file created by RN when porting the
116 kes Rearrange some of the Win32 directories and the placement of the files
118 kes Set DEVELOPER flag in version.h
120 ========================================================================
121 Release Version 2.2.0
123 kes Apply a second doc patch from Marc.
124 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
125 improves the tips section that discusses how to setup multiple
128 kes Update bat README file.
129 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
130 corrects a typo in the Recycle status check in db_find_next_volume().
131 This will probably fix a number of annoying problems with multiple
133 kes Modify most of dird/msgchan.c to use bsock class calls rather than
134 bnet calls -- no functionality change.
136 kes Modify the Verify output to specify if files are missing on
137 the Volume(s) or disk. Fixes confusion in bug #916.
138 kes When more than one Volume is read in a migration job, the last
139 Volume bytes reported are from the last read volume rather than
140 the last written volume. Fixed. This fixes bug #910.
141 kes Fix display of Recycle flag after update volume=foo recycle=yes.
142 It previously printed New Recyle flag is: no. This fixes bug
145 kes Correct seg fault when switching tape drives during restore.
146 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
147 be used until after 2.2.0 release.
149 kes Remove fnmatch() in SD that permitted wild card specifications.
152 kes Fix %g in filename returned by SQL for browse tree reported by
154 kes Fix configure so that it puts config.out in the cwd rather than
156 kes Attempt to fix the locking problem reported by Eric in bug #906.
157 kes Make berrno class to leave errno unchanged after constructor call.
158 kes Make bnet_server use the heap rather than the stack to allocate
159 its socket fd pointers to avoid a crash at termination. Problem
160 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
162 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
163 and putting it in depkgs-qt along with Qt4.3.
165 kes Rework code in acquire.c that switches drives for reading when
166 the Media Type does not match. This should fix bug #906
168 ebl Fix a director segfault during job setup #907
169 kes Correct seg fault in postgresql when first operation returns no
170 rows. Fixes Dirks File browser problem seg fault with bat.
172 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
173 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
176 kes Implement PopUp YES/NO dialog for bat.
178 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
180 kes Correct RunScript to terminate job in FD on failure.
181 kes Change abort_on_error and AbortJobOnError to fail_on_error
182 and FailJobOnError in RunScripts.
183 kes Minor tweaks of code formating in RunScripts, principally to
184 avoid depassing 80 columns.
186 kes Eliminate one #ifdef Win32 in bsmtp
187 kes Implement grow tool to grow a file for testing very large databases.
188 kes Add big-vol-test to test Bacula seeking with > 5GB.
191 kes Modify find_next_volume() to return all values in Media record.
192 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
196 kes Update Release notes
198 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
199 Warning, in previous beta version, all media get from scratch keep their
202 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
203 This should fix bug #842. Made a note to look at removing the temp
204 files at the end of the install.
205 kes Add ability to mount and unmount a file device providing it is
206 marked as being removable and has the appropriate mount and unmount
207 commands defined in the Device resource. This fixes bug #830.
208 kes When applying a storage override, release all previous storage
209 definitions rather than just prepending the new storage.
210 This should prevent a good deal of confusion.
212 kes Implement ./configure search for qwt libraries.
214 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
215 Win32 FD. This should fix bug #893.
216 kes Remove an unnecessary beep in Win32 init code.
217 kes Update copyright dates in Win32 executable about boxes.
218 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
219 code with a BSD getopt.c and getopt.h.
220 kes Remove sched.h from the Win32 compat directory -- not used.
221 kes Remove the Exit menu item from the Win32 tray monitor. If you really
222 need to shut it down, do it through the services panel or the command
224 kes Remove some inappropriate Bacula FSFE copyrights.
225 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
226 kes Fix regress config non-portable test as pointed out by
227 Florian Heigl <florian.heigl@gmail.com>
228 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
229 as pointed out by Florian Heigl <florian.heigl@gmail.com>
231 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
232 Reported by Frank Sweetser.
236 kes Fix client-only build.
237 kes Integrate client-only fixes for bsys (initgroups) and conio from
238 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
239 kes Make arguments to get_scratch_volume() in same order as other
241 kes Rework the prune_volumes() subroutine so that after purging and
242 no volume found in desired pool, it will check for a scratch
243 volume. This prevents recycling the whole scratch pool.
244 kes Add code to status storage to print boffset_t (largefile support).
246 kes Move qwt (Graphics libarary for Qt4) to depkgs.
247 kes You now need a --with-qwt=<dir> to be able to build bat.
248 kes Update src/win32/cats/bacula_cats.def to include the new
249 db_get_query_dbids() call on Win32.
251 kes Correct a problem when selecting a scratch volume and moving
252 it to another pool that lost some columns.
253 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
254 kes Enhance Autochanger error messages to include Volume and device name.
255 kes Rework prune_volumes() code to take account of InChanger flag,
256 and to handle recycling volumes going to the Scratch pool and
257 current pool because the RecyclePool directive.
258 kes Implement a better and more efficient db_get_query_dbids() to
259 handle creating and passing back a list of DBIds.
263 kes Start work on new more efficient DBId subroutine. First use
264 will be for recycling volume to Scratch inchanger.
265 kes Increase number of JobIds in pruning from 1000 to 10000.
266 This to be replaced by above routine.
267 kes Begin implementation of building Qt4 on Win32.
268 kes Correct typo in fix I added for bad TLS shutdown.
269 kes Pull 2.0.3 patches into patches directory.
270 kes Update Release notes. Include qt-console in line count.
271 kes Update Projects file.
273 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
274 bug in migration code where a job that spanned two volumes
277 kes Implement new BST_DESPOOLING blocked state. Change from locking
278 during despooling in SD to blocking. This means that other threads
279 can work with the device structure, in particular the reservations
280 system while despooling.
282 kes Fix return in reservation message queue that missed clearing
283 the jcr lock (implemented 26Jun07 below).
284 kes Rename a number of dev methods to make locking function names
286 kes Document locking in lock.c. Move lock structures to new file
289 kes Move reservations message lock to lock jcr only this
291 kes Move main SD locking code into lock.c (new file).
292 kes Update Win32 build to include lock.c
296 kes Dirk committed the qwt library code for drawing graphs in bat.
297 kes Tweak install of qwt so that it is integrated with ./configure.
299 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
300 out by Eric (my typo).
301 ebl Fix configure.in to get batch mode enable
302 kes Return correct string from authenticate.cpp in bat when connecting
304 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
305 spurious line drops when using TLS.
306 kes Do not file reparse points when restoring a file that already
309 kes Implement Windows reparse points -- similar to directories, but
310 we do not descend into it. This is a first cut. They seem to
311 be backed up, but restore is not yet tested.
312 kes Remove restore_blocking in tls code when shutting a socket to leave
313 it in blocking mode. Hopefully this will fix the encryption bug
314 reported by Frank Sweetser.
315 kes When opening a file for backup, tell the OS that we are going to
316 read it sequentially -- optimization.
317 kes Change variable names in authenticate_director() to not conflict
318 with member names in bat. Caused great confusion with compiler,
321 kes Queue openssl error messages in case of comm problem.
322 kes Do shutdown() call if socket terminated.
323 kes Remove some duplicated code in tls.c
324 kes Move more of the bsock member variables into private and access
326 kes Add Frank Sweetser's tls-test to the regression suite.
328 kes Add Swedish sv.po file
330 kes Don't print clock skew message in FD if less than 3 seconds diff.
331 kes Add a bit of VSS info to status client.
332 kes Implement a first cut of Vista VSS, using Win2003 code.
336 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
337 loaded tape but uses first drive).
338 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
339 This was indeed a Win32 issue.
341 kes Simplify search of autochanger for in-use Volume.
342 kes Fix exit condition of check for in-use volume. kes Remove
343 inappropriate my_postgresql_free_result() in db_close()
345 kes Fix bad return in FD when encryption signature not found.
346 Probably caused a crash.
347 kes Inhibit missing encryption signature error messages for
348 file types where no signature computed.
349 kes Correct inverted check on autochanger in reservation system.
350 kes Tweak debug code in autochanger reservation.
352 kes Add some additional locking in the cats directory in subroutines
353 that modify packet variables called from batch insert.
354 kes Rework how dcrs are allocated. new_dcr() can now be called
355 with an existing pointer, and it will simply clean it up.
356 This allows the reservation system to test various different
357 devices, and will permit easy device changes.
358 kes A bunch of changes all over to handle new new_dcr() calling
360 kes Work more on the Volume management in the SD. Remember Volumes
361 for tape drives and for autochangers (even virtual disk changers).
362 kes When looking at the Volume list to reserve a drive, handle
363 autochanger names correctly by interating through the changer
364 devices. Also call the Director to see if a Volume is suitable
366 kes Fix some bugs in bscan. Make sure all media records are written.
367 Make sure that valid JobMedia records are written for disk files.
368 Previously they were completely wrong.
369 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
370 that the URLs don't change and so that the developers will all
371 work off the same copy. Rebuild from scrach.
372 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
376 kes Fix seg fault in FD from incorrect digest size.
377 kes Fix argument to non-OpenSSL crypto.c subroutine.
381 kes Remove a few malloc()s from the encryption code.
382 kes Use the class calls to bsock in filed/backup.c and restore.c in
383 place of the old bnet_xxx code.
384 kes Implement code that does an on the fly calculation of the
385 signing digest during restore of encrypted files. It makes
386 a best guess at the algorithm, and if it is not correct, will
387 then revert to the old code which reads the file after it is
389 kes Implement at least one missing crypto stream in stream_to_ascii()
390 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
391 #877 where a reload with bad syntax causes Dir to exit.
393 Cut: 2.1.14 beta (not released)
395 kes Do not free a volume on a tape drive until another volume is
396 mounted and read, or the autochanger unloads the volume.
397 This should help the SD re-use volumes that are already mounted,
398 and should fix bug #886.
399 kes Apply patch from user brettedgar that allows gnome2-console include
400 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
401 kes Apply patch from Lucien Weller that fixes day of week calculation
402 because of DST flag problem. Fixes bug #887.
404 kes Move find_next_appendable_volume() to after acquiring a valid device
405 in reserve.c. This fixes bug #864 -- confirmed by reporter.
407 kes Unable to reproduce bug 872. However added additional testing for
409 kes Bug #874 resolved by documenting SQLite limitations.
410 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
411 kes Bug #881 resolved by removing typo in mtx-changer script.
412 kes Made Frank Sweetser's wiki the official Bacula wiki with his
413 approval. Added a link to the wiki on the web page, and implemented
414 a backup from http://paramount.ind.wpi.edu
416 kes Fix update allfrompool to pass pool name.
418 kes Convert to pure GPL v2 license.
419 kes Fix sscanf problems reported by Peter Buschman that caused
420 a bus error on Solaris.
421 kes Rework (simplify) the select prompt in bat.
422 kes Move get_jobid_from_tid() into lib and create a
424 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
425 should definitely fix the problem of lost error messages in the
427 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
428 kes Eliminate tcpd.h from the project. Enclose the #include from the
429 library with extern C ...
430 kes Add print of signal name when a signal is trapped.
434 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
436 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
437 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
438 makes SQLit3 run 30 times faster, though a bit less safe.
439 kes Implement --with-batch-insert in configure and detection of thread
440 safe libraries. It is on by default, but turned off if no thread
441 safe library (e.g. SQLite 2) is available.
443 kes Fix Bacula PostgreSQL buffer overruns.
444 kes Do better checking for NULL results returned from PostgreSQL;
445 implement retry for failed queries; clear results buffer after
446 failed query. Hopefully this will correct the PostgreSQL failures.
448 kes Implement algorithm to handle only one appendable volume with
449 Prefer Mounted Volumes = no.
450 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
451 returned from a query.
452 kes Make volume lock recursive.
453 kes Implement an additional volume reservation algorithm that
454 starts by considering all reserved volumes then uses the
455 old brute force algorithm of searching the resources to
456 find a suitable device.
457 kes Add new reservations debug code and refine the old code.
458 kes Update the win32/dll/bacula.defs file.
460 kes Tweak reservations algorithm to permit a few more cases, i.e.
461 volume reserved, but on different drive, ...
462 kes Enhance SD status to include Pool and Media Type for drive in a
463 more readable format (a bit longer).
464 kes Fix PostgreSQL double free.
466 kes Minor refactoring of restore decryption code.
467 kes Add code to smartall.c to detect double free of a buffer.
469 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
470 so that bsmtp will create a correct email address (mailbox only).
471 kes Modify 'memory' command so that the buffers are listed as 'In use'
472 to avoid confusion with Orphaned buffers.
473 kes I reworked the OpenSSL include/lib flags to be handled in
474 the standard Bacula way, which should fix bug #863 concerning
475 non-standard OpenSSL libraries.
477 kes Implement Help Browser window for bat.
478 kes Fix reload bug that reset StorageId to zero.
480 kes Fix TLS #ifdefing when TLS turned off.
481 kes Ensure that when labelling a tape with Slot=0 that InChanger
483 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
485 kes Add StartTime to final uar_sel_jobid_temp query so that we can
486 add DISTINCT (required by PostgreSQL).
487 kes Implement BSOCK authenticate_director() method. Eventually will
488 authenicate all daemons.
489 kes Move several more functions into the BSOCK class.
491 kes Add code to tell the OS that we no longer need a cached
492 file that we were reading. In findlib/bfile.c. Also,
493 only cache files that we are reading. Thanks to
494 Tobias Oetiker <tobi@oetiker.ch> for the idea.
495 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
496 kes Implement script to automatically generate cats and dll .def
498 kes Update README.mingw32 to include new .def file generation.
499 kes Correct typo in UTF-8 error message as reported by:
500 jhernandez <julianhernandez@gmail.com>
501 kes Add additional sm_check() code on debug level 1.
502 kes Set default debug level to 1.
503 kes Trap SIGABRT in attempt to get traceback.
505 kes Reduce bat connect timeout from 30 to 15 seconds.
506 kes More restructuring and implementing BSOCK class in place of
508 kes Remove a few unnecessary malloc() tests in crypto code.
509 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
510 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
511 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
513 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
515 kes Fix Verify InitCatalog. The attributes were not pointing to the
516 correct saved location.
517 kes Implement message callback so that GUI is sure to get all
518 daemon messages. Currently displayed in a dialog in bat.
519 kes Ignore SIGUSR2 (Bacula timer) in bat.
520 kes Apply regress patch from bug #859 to allow regress to work
521 with Solaris compiler.
523 kes Begin adding TLS support to bat.
524 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
525 clean up lex.c and make it more readable.
527 kes Move more bnet functions into the BSOCK class.
528 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
529 kes Complete change of berrno strerror() method to bstrerror()
533 kes Cleanup incorrect email addresses in bsmtp.
534 kes Make bat display initial messages rather than discard them.
536 kes First cut of adding .mod to the run command.
537 kes Implement auto display of messages in bat.
538 kes Enhanced preferences to allow all Bacula output to be
541 kes Try to make bsmtp date routines more generic.
542 kes Fixed bug #856 autochanger documentation.
543 kes Rework bsmtp date editing for Win32. This fixes bug #854.
544 kes Add new cats entry point so Win32 builds.
546 kes Attempt to fix bsmtp date editing on OSes without %z editing.
548 kes Do better checking for the MySQL 64 bit libraries looking for both
549 .a and .so libraries.
550 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
551 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
552 kes Require the thread safe version of MySQL during configure. Thanks
553 to Andre Noll for pointing this out.
554 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
555 continuing in migration code.
556 kes Apply implementation of tray-monitor font derived from gnome-console
557 submitted by Andreas Piesk <a.piesk@gmx.net>
559 kes Eliminate important memory loss in SQLite
560 kes Fixed the batch insert MySQL thread specific data that was not
561 being freed. See cats/mysql.c:db_thread_cleanup().
562 kes Fix restore before command.
563 kes Convert old hdr.name to name() in a few places.
564 kes Implement update jobid command.
565 kes Return all time_t dates in db_get_job_record()
566 kes Stop watchdog in SD earlier.
567 kes Put Pool just after Storage in please mount message.
568 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
571 kes Update the po files.
572 kes Fix Verify InitCatalog by making it cache attributes.
574 kes Change name bacula-bat to bat for man 1 page to correspond to
576 kes Check for client and store NULL pointers in status command. This
578 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
579 kes Fix sign extended editing of %p.
580 kes Clean out a little old #ifdefing in cats/mysql.c
582 kes If time diff between DIR and FD is more than 600 seconds convert
583 INFO message to WARNING.
584 kes Implement heap size display in status for all daemons.
585 kes Attempt to fix MySQL db open memory loss (not successfull).
586 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
587 kes Eliminate memory loss in MySQL (possibly other SQLs) during
588 Query. This looks like a MySQL but but by doing extra releases,
589 the memory goes away. This should fix bug #847.
591 kes When backup fails, cancel SD before waiting for sd termination.
592 kes If SD is waiting for FD to connect during cancel, wake up the
594 kes Fix fsf code so that errno is correctly reported.
595 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
597 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
598 so that Bacula doesn't later stumble into a seg fault.
599 kes Use the term Restore Client in the restore Job report.
600 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
601 the original job's FileSetId.
602 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
603 spooling in migration jobs. Not yet tested.
604 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
605 reading conf file from a pipe. However, do it with open_bpipe()
606 rather than popen. Not yet tested.
608 kes Fix an ugly bug where the VolCatBytes were getting updated
610 kes Implement bconsole memory command that prints current memory
611 usage, plus smartalloc dump.
612 kes Clarify some error messages in backup, admin, and migrate.
613 kes Shrink label dialog to smaller size.
614 kes Invert Cancel OK buttons on restore to be OK Cancel.
615 kes More strerror() to bstrerror() conversions.
617 kes Start implementing bstrerror() in place of strerror().
618 kes Stripping path -- seems to work.
620 kes Prevent door and port files from being restored (mostly
622 kes Free an unreleased buffer in compat code.
623 kes Change console Job name from *Console* to -Console- to eliminate
624 Win32 filename problems. Put Win32 path separator when creating
625 Console file. This fixes bug #846.
626 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
628 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
630 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
631 to force Win32 error message.
633 kes First cut strip path. The data should be passed to the FD,
634 but nothing is done with it yet.
635 kes Enhance the digest and signature routines in the crypto
636 library to accept a JCR and to use it to print error messages
637 so that they will go in the Job report rather than the daemon's
639 kes Simplify some of the verify signature code.
640 kes Simplify a few of the alternative returns in the signature
643 ebl Use only POSIX regex instead of GNU regex in breg.c for
644 File relocation. It fix broken freebsd compilation.
645 kes Convert all other Dir files to use new ua class message
647 kes Tentative fix for missing digest signature in bug 807.
648 kes Correct handle problem in new win32_ftruncate routine.
649 kes Convert ua_purge.c and ua_update.c to use new ua class
650 message routines for bat.
652 kes Correct incorrect installation of LICENSE in Win32 installer.
653 kes Display LICENSE at the beginning of the Win32 install.
654 kes Attempt to correct the need for the png files to be installed
656 kes Reapply my bat.conf install script in qt-console. I think I
657 editted bat.pro instead of bat.pro.in and it was lost.
658 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
659 the /var/lock/subsys for subsysdir. Also corrects typos in the
662 kes First cut update job.
663 kes Correct configure to include qmake of src/qt-console directory.
665 kes Make restore job yes/mod/no print in one command so GUI works.
666 kes First cut implementing backup and restore client.
667 kes Correct editing in Verify output that caused a seg fault.
669 kes Insure that bat.conf is not overwritten during installation.
670 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
671 while I was implementing migration in March 2006 !
673 ebl Cleanup file relocation, using char *RegexWhere instead of
674 char *where + bool where_use_regexp
675 kes Update some manpages and add bat manpage.
676 kes Make a first cut at converting bacula.spec.in for bwx-console
678 kes Apply patch from John Goerzen to add hostname as fourth argument
679 to make_catalog_backup script.
680 kes Fix typos I introduced into bsmtp.c
681 kes Make pm_strxxx() routines handle input of NULL pointer. This
682 is to protect from NULL pointers returned from SQL databases.
683 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
684 kes Add more debug to FIFO code -- fix fifo regression test.
686 kes Implement posix_fadvise in FD, and for reading spool files in SD.
687 kes Add thread timer to bnet_connect() to break from OS if wait time
690 kes Update Win32 build to include new files, new symbols, and
692 kes Implement socket level heartbeat (tcp_keepidle)
693 ebl Commit File relocation patch
694 kes Make bat have 'make install' target.
695 kes Warn during install if old gnome-console binary found.
696 kes Warn during install if old wx-console binary found.
697 kes Add -8 option to bsmtp command line to add content type utf-8.
698 Fixes bug #809. (Character coding problem in bsmtp).
699 kes If < is found in target (from, to, cc) then do not enclose the
700 target in < > in bsmtp. Fixes bug #772 (malformed address).
701 kes When printing certain items in dbcheck, stop after 300000.
702 Fixes bug #822. (dbcheck loops).
703 kes Incorrect status in Dir after waiting for mount with poll set.
706 kes Extend idea of Prefer Mounted Volumes to mean a volume about
708 kes Print waiting to reserve a device every 5 mins.
710 kes Don't call close_part in label.c if tape and relabel.
711 kes Don't free volume if busy in close() -- should help with
713 ebl Fix #824 RunScript bug (After script could be execute twice)
714 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
715 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
716 Add a regression script to test RunScript
718 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
721 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
722 deprecated. No additional bugs will be fixed, and they will be dropped
723 in a future release (probably 2.4.0).
724 kes Change name of wx-console to bwx-console to make it more Bacula
726 kes Change the name of gnome-console to bgnome-console to make it
729 kes Some time in March, a Feature Request with patch from Jorj Bauer
730 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
732 The ability for the director to validate a Client (FD) CN against
733 an arbitrary set of patterns rather than the hostname, with
734 A new 'TLS Allowed CN' set of directives which are implemented
735 in the Client resource. Then pattern matching is used in place
736 of hostname matching against the Certificate's CN. As an example, we
737 have certificates which (a) use a local CA, and (b) have a CN of the
739 kes Add new/changed entry points to Win32 build
740 kes Create unaccepted-projects for projects that are not accepted.
741 kes Simplify locking in the reservations system.
742 kes Add more debug code in reservations.
743 kes Make sure error condition on reserving a volume is handled correctly.
744 kes Correct handling of volume_in_use.
745 kes Correct handling of initializing a device.
746 kes Move handling of broadcasting releasing a device into release_device().
747 kes Correct attaching dcr to dev so that it is only done if device
748 is properly initiated.
750 kes Locking debug level tweaks in SD.
751 kes Tweak new Volume code.
753 kes Add exec external-command [wait-seconds] to bconsole. This
754 executes the external-command. Note! normally external-command
755 should be enclosed in double quotes.
756 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
757 it should normally be off in a production system.
759 kes Implement die command for SD so that we can force it to dump.
760 kes Implement SD lock debug code.
761 kes Implement new algorithm for keeping Volume list in SD. It
762 is now owned by the device.
764 kes Implement new code for freeing in use volumes that should
765 resolve if not all, some of the problems of multiple drive
766 tape conflicts described in bug 801.
768 kes Fix gui/bacula-web/images files in svn.
769 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
771 ebl Fix a bug in batch mode (in string escape)
772 kes Correct migration prune SQL typo that crept in in a
775 kes Move bnet_despool() into class in bsock.c
776 kes Modify job report to include director name and Build OS.
777 kes Move drop root privilege and check_catalog() before fork.
778 kes Add update database scripts (version 9 to 10) to updatedb directory.
780 ebl Check size and age of each file after its backup to see if
781 it has changed during backup, if 'checkfilechanges' is set.
782 The FD will do an extra check (stat(2)) after
783 each file backup. mtime, ctime and size are compared with
784 'before backup' information. If time or size mismatch, an
785 error message will be generated. You must upgrade FD to use it.
787 kes Make database name and user configurable
788 --with-db-name=xxx --with-db-user=xxx
789 kes Add back database type to message.c for debugging.
791 kes Implement dir_sql() which issues an SQL query.
792 kes Modify bat medialist to use dir_sql() and do some minor C++
793 formatting as well as eliminating a number of pointers, simplifing
796 kes Fix some of the mtx-changer grep commands for tape label readers.
797 kes Convert a number of bsendmsg into the appropriate send/warning/error
799 kes Suppress the using database message in the .sql command.
800 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
802 kes Add context menu for floating a window.
803 kes Some minor cleanup and name changes in qt-console
804 kes Add doing mt setblk 0 in Win32 mtx-changer.
805 kes Apply Martin's bug fix to move definition of ENODATA for
807 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
810 kes More pruning cleanup.
811 kes Turn on wait_for_drive by default in mtx-changer.
812 kes Turn on Batch insert code by default as it now passes regression.
813 kes Add ./configure --enable-bat to enable building of Bat.
814 No install yet though.
816 kes Implement a new .sql command for bat.
817 kes Implement code to turn off pruning in obtaining the next volume.
818 Pruning is turned off for the status dir command, but turned on
819 for SD requests and for the list nextvolume command.
821 kes Correct Qmsg() that was not updated correctly when committing a
822 previous change (probably the recent TLS patch).
824 kes Write new subroutine is_volume_purged() that explicitly checks
825 if the Volume is purged, and if so marks it as such. This should
826 resolve problems reported about needing to mount twice to recycle
828 kes Rewrite pruning algorithm to do more work in the SQL engine, and
829 to pass a list of JobIds to be deleted to SQL. Also, minimize the
830 amount of duplicated code.
831 kes Do volume pruning only for the Media Type desired (reduces pruning time
832 if multiple Media Types are in the same pool).
833 kes Implement more detailed info in the Job report for the Bacula version
835 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
837 ebl Add bbatch tool to bench database and insert mode.
838 Fix sql quote stuff in batch mode
839 Fix sql stuff for mysql
841 kes Correct problems with am/pm scheduling. Fixes bug #808.
842 kes Implement new prunning code that prunes up to 1000 jobs at
843 the same time. The same technique can be applied to a number
844 of other prune/purge subroutines.
845 kes Add an insanity check when starting a new tape job to ensure
846 that the tape position has not been changed. If so fail the
848 kes Fix Win32 build for dlls to add the folllowing:
849 src/lib/bsock.c -- new file with new entry points
850 src/lib/dlist.c -- new entry points
851 src/cats/sql_create.c -- new entry point
852 src/cats/sql_cmds.c -- new DATA item exported
854 ebl batch mode cleanup bscan-test is ok now.
855 kes Implement SD code to check length of disk volume before appending.
857 kes Correct return status on db_batch... routines.
858 kes Add call to db_write_batch_file_records() to migration code.
859 ebl Fix AfterJob timing
860 kes Move the checking of the database in initializion of the Director
861 to after we drop privileges. This avoids the need for both root
862 and bacula access to the DB.
863 kes Correct a misplaced variable definition in src/filed/backup.c
864 kes Correct how the new batch insert db_create_attributes_record()
865 uses the arguments. Caused a seg fault in bscan.
866 kes Implement lock() and unlock() methods in DEVICE class.
867 Implement block() and set_block(xx) methods in DEVICE class.
868 kes Modify bnet_connect() so that it uses time() to check for the
869 wait time expiring (on some OSes, some system calls may not
871 kes Modify Verify to obtain the previous JobId when it is actually
872 running rather than at schedule time (as it was in 1.38.x).
873 kes Fix src/job.c to handle MaxWaitTime correctly. This should
875 kes When checking pid in pid file, continue running if the pid is
876 the same as ours. This occurs on IRIX after a system crash.
879 kes Extend new GUI API.
880 kes Make the ua structure a class, and implement send_msg(),
881 error_msg(), warning_msg(), and info_msg().
883 kes Apply fix from for building wx-console on the Mac from
885 kes Implement new select mechanism for GUI programs.
886 kes Reorganize initialization of stackedWidgets in bat.
888 kes Add updated nagios plugin supplied by Christian Masopust.
890 kes More bat implementation.
891 kes File migrate bug with Pool Occupancy using mediaid instead
892 of jobids. Fixes bug #795.
893 kes Fix orphaned buffers in filed backup and verify due to
894 crypto buffers not freed during errors. Fixes bug #789.
895 kes Extend new GUI api code to tree commands.
896 kes Ensure that tree and dot commands check console ACLs.
897 kes Permit marking directory with trailing slash.
898 kes Allow 20 console connections (instead of only 10).
900 kes Add smartctl call to bacula-sd.conf as an example of getting
903 kes Modify jobq.c to let simultaneous restore jobs run. This may
904 cause them to fail if they cannot get a drive.
905 kes Add Client Connect Wait to Storage daemon to permit users to
906 modify the time the SD waits for a FD connection.
908 kes Correct virtual changer check which was backwards. This caused
909 volumes to be unloaded into slots already occupied.
911 kes Apply Command ACL filter to JobId list in restore command.
912 kes Correct typeo in var.c patch.
914 kes Don't let Bacula prune File or Job records for the current Job.
915 kes Fix variable substitution pad + inc bug reported (with patch)
918 kes Correct SQLite log table index as reported by Luca Berra.
920 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
922 kes Begin implementing new comm signals for API.
923 kes Fix a few places in lib/message.c where the open fd may
925 kes Continue implementing lib/bsock.c (real class). Make jcr,
926 who, host, and port private. There are new methods to access
927 them for non-class use. This required touching a number of files.
929 kes Add LANG=C to autoconf/randpass so it works with languages other
930 than English. Fixes bug #788.
932 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
934 You will not be able to generate Include/Exclude list any more.
935 It will be fixed soon.
936 If you want to use this, you can apply
937 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
939 kes Restore of sockets created false error messages because Bacula
940 no longer restores sockets, but the code was still trying to
941 set the attributes on a non-existent file. Reported by a user.
942 ebl finish RecyclePool feature
943 Media will takes Pool.RecyclePool
944 when moving from Scratch to a Pool or when user will do
945 update volume=xxx frompool
946 To use it, add RecyclePool = aPool to your Pool resource
949 RecyclePool = Scratch
953 kes Expand new BSOCK class adding signal() and new BNET signals.
954 kes Begin enhancing the dot commands adding a new API function
955 that returns more information and will make it easier
956 to interface to the Director from a program.
958 kes Make DEVICE fd private. Its new name is m_fd, and can be
959 obtained with dev->fd() outside the class. This is the
960 first of many DEVICE members to be made private.
961 kes Implement Michael Renner's idea on having a virtual disk
962 changer. I made some minor modifications (e.g. I did not
963 implement the Virtual Changer directive, but simply set
964 the Changer Command to an empty string.
966 kes Implement a BSOCK send() method that writes the whole record
967 in a single write() request rather than in two.
968 ebl add update volume=xxx recyclepool=yyyy
969 volume takes recyclepool from pool when using update volume=xxx from pool
971 kes Fix encryption deblocking bug, which caused some restored files
972 to be truncated. This fixes bug #763.
973 kes Add FD event sequence order prepared by Eric -- for RunScripts.
974 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
976 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
977 ebl Use btime_t instead of uint64_t in media patch.
979 kes Optimize the use of the database a bit in the Status dir command.
980 Only open it when needed, ensure that if any previous database
981 was opened, it is closed.
983 kes Correct VolCatBytes bug from media patch.
984 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
985 in the case of orphaned records.
986 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
987 and File records in 300K chunks to be more efficient. This
988 idea came from Juan Luis Frances (if I remember right).
989 kes Apply Eric's scratch patch that moves a purged Volume to
990 the RecyclePool. Question: how is RecyclePool set? what
991 happens to the ScratchPool?
992 kes Apply Eric's media patch that collects read/write media
993 times as well as byte counts. This patch requires a
994 simultaneous upgrade of the DIR and SD. Note, there
995 should be some way to turn off timing. I'm not sure
996 times are in Bacula units.
997 kes Apply Eric's batch-insert patch.
999 kes Update projects list.
1001 kes Implement Include/Exclude file lists in FD as dlists using
1002 the new dlistString class. This permits efficiently having
1003 large include/exclude lists and completes project Item 25.
1004 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1005 console is authorized to cancel the job. This fixes bug
1007 kes Modify SD so that the VolCatJobs medium record is updated
1008 at the beginning of a Job rather than the end. This
1009 fixes bug #775 where exceeding MaxVolJobs caused jobs
1011 kes Added a mutex around getting and setting Volume information
1012 so that multiple simultaneous jobs will single thread.
1014 Switch to using Subversion
1015 kes Remove src/pygtk-console/ from configure
1017 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1018 plus the entrypoints.
1019 kes Apply patch supplied that corrects debug print
1020 in canceling jobs for max run time. Supplied as
1021 part of bug #621, which was previously fixed.
1023 kes Test on job_canceled() and sd_msg_thread_done inside
1024 loop starting the message thread to avoid a race condition.
1026 kes Remove rl_catch_signal from console.c as it conflicted
1027 with the header definition. Fixes bug #765.
1028 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1030 kes Clarify some stored/acquire messages to indicate if the
1031 problem is with read or append.
1033 kes Fix memory leak with storage ids in cats/sql_get.c
1034 kes Terminate watchdog earlier to avoid reference to released
1035 memory -- reported by Jason Austin.
1036 kes Move closing the database from jobq.c to the director daemon
1037 termination routine. This fixes memory leaks for shadow jobs
1038 (i.e. migration jobs).
1039 kes Free up the unique jobid chain items in migrate.c. This fixes
1040 a memory leak problem.
1041 kes Convert some ugly looking for statements to use foreach_alist
1042 in findlib/find.c. This will facilitate converting the structures
1043 to use dlist (for large include/exclude lists).
1044 kes Fix a bug in the btree.c and btree.h routines, then rename them
1045 rblist and add them to be built in src/lib. Include some new
1046 methods written by Rudolf Cejka that make the code more readable
1047 (hides some of the ugly casting).
1048 kes Add set_next() and set_prev() methods which make the code much more
1049 readable. Also add a new dlistString class that facilitates storing
1050 strings in dlists. To be used in the large include/exclude lists.
1051 kes Make some trivial modifications to lib/tree.h that use rblist
1052 rather than dlist for storing the tree links. This was suggested
1053 by Rudolf Cejka. The result of this is that the restore tree now
1054 uses red-black binary trees rather than simple linked lists. This
1055 should give rather dramatic speed improvements for directories
1056 contining large numbers of directories/files (more than 10000).
1058 kes Fix maxruntime bug #621.
1060 ebl Implement the include JobID in spool file name project.
1061 kes Reorder projects file in order determined by Jan 2007 vote.
1062 kes Implement item #12 on project list -- quick release of FD by
1064 kes Fix open of SQLite3 db where user does not have write permission
1065 so that DIR does not crash. Fixes bug #761.
1067 kes Add back missing @ in Win32 Makefile.
1068 kes Change 'Device not configured to autolabel' from INFO
1070 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1071 which should restart an indefinite # of times.
1072 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1073 other DIR specifications.
1075 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1076 Fix path quoting in SQLite scripts.
1077 Fix problems with SHGetFolderPath.
1079 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1081 kes Fix Job restart on error bug that promotes an Inc to a Full
1082 backup. This should fix bug #755.
1083 kes Add qt-console and first cut of code.
1087 kes Fix Bacula->Documentation link on Win32 to point to index.html
1088 instead of bacula.html. Fixed bug #750.
1089 kes Return JobId in db_get_job_record() when JobId==0. This should
1091 kes Do not release source pointers when restarting a failed job.
1093 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1094 This *should* fix bug #747.
1095 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1098 kes Modify USTORE constructor to set an empty store_source string,
1099 and don't copy the store_source string in a cancel. Hopefully
1100 this will fix Arno's seg fault, bug #744.
1101 kes Add back code to disable conio in configure. Fixes bug #743.
1102 kes Correct the Options scanner in the FD to correctly handle
1103 SHA1 option, which was eating the next option. Reported by
1105 kes Add code to indicate when the SD is spooling, spool wait, and
1106 despooling as requested by Alan Brown.
1108 Version 2.0.0 released: 4 January 2007