1 Technical notes on version 2.2
5 kes Fix bat seg fault at termination.
6 kes Add Bacula generated version to bat about box.
8 Beta Release Version 2.2.10-b1
10 kes Permit multiple simultaneous restores -- experiment.
12 kes Backport development stream SD reservation system changes.
16 kes Move final volume swapping code to DCR method and
17 call it from acquire_for_read().
18 kes When wrong volume is mounted during read, unload_autochanger.
20 kes Stop searching for Volumes in SD askdir if DIR returns the
21 same volume name twice in a row.
23 kes Tweak the swap Volume from one drive to another code so that
25 kes Resolve several problems with recycling that broke the new
26 code (these problems are in 2.2.9 as well).
27 kes Remove the volume lock when calling the sysop code.
28 kes Don't mark a reserved volume with no writers as unused otherwise
31 kes Rework class structures for VOLRES, DCR, and DEVICE to make
32 the method names a bit more logical, and for more logically
33 handling the responsibilities.
35 kes Remove redundant code in terminating the scheduler that just
36 causes a seg fault in many cases.
37 kes Cleanup releasing a volume and make it a DCR method.
38 kes Improve algorithm for detecting pre-reserved volume and
41 kes Tweak volume swapping code so it works.
42 kes Correct name overloading in mount.c
43 kes Replace released flag in VOLRES with reserved and add access
44 methods for the VOLRES class.
45 kes Prevent volume from being released while being swapped.
46 kes Refactor parts of stored/mount.c
48 ebl Add sanity checks for VolWriteTime and VolReadTime
49 ebl Take care of bad clock changes while computing VolWriteTime
50 and VolReadTime. This should fix or limit #1066
51 kes Correct error string numbers in dird/catreq.c
52 kes Restructure reserving, acquiring, and mounting volumes. Calls to
53 autochanger are deferred for mount.c -- simplifes the code.
55 kes Do not prune any running job. It just fails the job.
56 kes Lock the volumes when changing dev->reserved_device and marking
57 the volume unused otherwise the device can get reserved by
58 another job before the volume is released, thus blocking it.
61 Beta Release Version 2.2.9-b7
63 kes Close bat console windows first to eliminate error message
65 kes Remove useless code in Scheduler that causes seg fault on
67 kes Correct some SD catalog request error messages.
68 kes Don't allow pruning of any running job.
69 kes Turn off code in read_record that causes a seg fault in the SD
70 when reading past an EOS_LABEL.
71 kes Turn off unloading the autochanger in reserve.c as it just
73 kes Lock volumes when unreserving a device.
74 kes Do not mark volume unused when recycling.
75 kes When acquiring, don't mark volume unused if it is reserved (busy).
77 Beta Release Version 2.2.9-b6
79 kes Eliminate ./configure warning on po directory
80 kes Fix bug #1063, reuse of freed ptr in list nextvol.
81 kes Release regex compile buffer in filed/job.c
82 kes Add proper type of const char in sql_create.c
83 kes Turn off debug in daemon termination routines
84 kes Move free_volume_list() before devices are freed in stored.c
85 kes Fix reference to uninitalized stack variables in bregex.c.
86 This should correct bug #1067.
88 kes Fix possible seg fault in SD when freeing a volume entry.
90 kes Apply patch from bug #1069 that corrects spurious error messages
91 when ACLs enabled on SGI but no ACL exists.
92 ebl Fix a storage deamon segfault at debug level 500.
94 Beta Release Version 2.2.9-b5 -- not released
96 Beta Release Version 2.2.9-b4
98 kes Re-enable code to remember last volume mounted on a non-tape
100 kes Add patch supplied in bug #1068 that fixes a SD crash when using
101 a Virtual autochanger.
102 kes Generate correct JobMedia records during spooling/despooling when
103 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
104 <tih@hamartun.priv.no> for excellent analysis and testing.
106 Beta release Version 2.2.9-b3
108 kes Rework certain SD locking based on gdb tracebacks of deadlocks
109 sent by Eric. This code now uses only the volume_lock() rather
110 than the reservations lock when at EOM and acquiring a new
112 kes Ensure only one exit point in several subroutines.
114 Beta release version 2.2.9-b2
116 kes Fix to initial tape drive open to release the volume name
118 Beta release Version 2.2.9-b1
120 kes Fix to JobMedia fix.
121 kes Fix bug pointed out by Peter Much that causes the StorageId to
122 be updated when reading a tape (during migration, it could have
123 been incorrectly set to the write StorageId).
125 kes Implement autostart scripts for Debian
127 kes Fix mtx-changer.in for broken Debian mt program.
129 kes Massive commit of all fixes and back ports to create 2.2.9
131 kes Apply doc fix from bug #1062.
132 kes Resolve crash and improper restore wx-console Win32 restore
133 GUI. Fixes bug #1065.
134 kes Update Win32 wxWidgets to latest version.
135 kes Attempt to do correct handling of Win32 mount points. Should
137 kes Fix Win32 FD backup/restore memory leak due to improper termination
138 of BackupRead/Write. This fixes bug# 1038.
139 kes Add const to AIX prototype for initgroups()
141 kes Undo bug #1047 heap overrun fix as it is not correct.
143 kes Fix creating first JobMedia record during Migration to include
144 proper index. This caused slow restores of migrated jobs.
146 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
147 and do not strip paths on symbolic links.
148 kes Set catalog backup database and user name from values specified on
149 the ./configure line.
150 ebl Apply patch to correct bug #1031, about wrong pool source information
153 Release Version 2.2.8
155 kes Apply patch from Martin to correct bug #1040, bscan sets existing
157 kes Fixed important spelling error in doc -- bug #1045.
159 kes Move initialization of read/write res lock earlier in the code.
160 This fixes the crash with a null conf file. This fixes bug
162 kes Redefine CURES in lib/parse_conf to be URES and move it all
163 into lib/parse_conf.c -- this responds to bug #1042, but does
164 not fix it. The fix is not to compile with FORTIFY_SOURCE.
165 kes Backport fix de-referencing a NULL pointer in the scanner from
166 the trunk SVN. I don't think this was reported as a bug.
168 Beta release Version 2.2.8
170 kes Re-enable the new job code editing (%f).
172 kes Fix bsnprintf for float point numbers. I broke recently when
173 parameterizing some variables. This fixes bug #1036.
175 kes Move Heartbeat documentation from Job to Director resource.
176 This fixes bug #1033.
178 kes Fix existing switch drive SD code to call autochanger to release
179 any old volume. This must be done to keep the autochanger from
180 releasing subsequently newly reserved volumes in doing a close().
181 This should possibly fix bugs #1032 and #1018.
182 kes Apply big backport of current SVN SD code that corrects a number
183 of race conditions. This is a first step in fixing bug #1018.
185 ebl Fixes bug #1028 where "Selection Type" option was not usable
189 Release Version 2.2.7
191 kes Partial back out (disabled) %f job code editing because it
192 does not build on Win32.
193 kes Fix seg fault Frank Sweetser reports in regression testing
194 on his systems. The problem was that the original author of
195 bsnprintf.c did not take into account the side effects of
196 using ++x in the argument to a #define.
198 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
199 that implements double quoting include names in conf files,
200 and also allows piping input by having the first character
201 be a vertical bar (|).
202 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
203 that implement %f in RunScripts to pass the FileSet name.
204 kes Skip leading | when lex input comes from a pipe as suggested
205 by Michael Stapelberg <michael@stapelberg.de>.
207 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
208 Nerijus Baliunas <nerijus@users.sourceforge.net>
210 kes This patch corrects a problem where the maximum concurrent storage
211 jobs counter gets out of sync during restore jobs causing jobs to
212 'wait on max Storage jobs'. This patch fixes bug #1009.
214 kes Add new include to postgresql.c suggested by Marc Cousins so
215 that it compiles correctly with pgre version 8.3. Also fix
216 misuse of %x with pointer (should be %p).
218 kes This patch fixes bcopy so that it produces correct Volumes.
220 kes This patch eliminates spurious output to the console during a VerifyVolume
221 job that contains encrypted data. It fixes bug #1024.
223 kes This patch prevents the 'status dir' command from trying to use a scratch
224 volume and possibly moving it from one pool to another. This patch fixes
227 kes Fix --archivedir addition to configure. Replace it with
228 --with-archivedir in configure.in This fixes the regression
230 kes This patch fixes bug #1012 where the job is canceled because
231 of Max Run Time exceeded when the job has not yet started.
233 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
234 one 'part' to write. Instead of each part being stored on disk,
235 written to DVD, then deleted from disk, all parts are written to disk,
236 and only the last is written and deleted from disk.
238 kes Correct typos in disk-changer.in
240 kes This patch fixes the status command to include the formating string for
241 JS_AttrInserting. It fixes bug #1021.
242 kes This patch should fix the Mac OS X build problem on the latest
243 Darwin, where sys/types.h was not included correctly (apparently
244 due to a change in the Mac headers). The solution was to explicitly
245 ensure that it is defined for the ./configure.
246 This patch also has a rebuild of configure that includes the Debian
247 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
248 kes This patch should ensure that queued messages to the console are
249 displayed as soon as possible. It should fix bug #1007, but has been
250 reported not to work.
252 kes This patch fixes the infinite loop when trying to increase the
253 maximum number of volumes in a Pool during the add command.
254 This patch fixes bug #1008.
256 Release Version 2.2.6
258 kes Get fix for joblist bug in bat from trunk.
260 kes This patch fixes bug #1003 where putting the message output from
261 a Verify job into the catalog results in a recursive loop. The problem
262 seems to show up only with postgresql (to be verified).
264 kes Fix bug #942 where lots of emails where generated when the heartbeat
265 interval was low and Bacula wanted a different tape from the one in
268 ebl Apply 2.2.5-lastwritten.patch to fix the LastWritten field
269 which was updated during a restore (or a reading migration) bug #982
271 ebl Use qmake-qt4 instead of qmake when available (debian system).
273 kes Add a security warning to src/cats/make_catalog_backup.in indicating
274 that passing the password via the command line (arg 3) is insecure.
275 This responds to bug #990 (it doesn't fix it).
276 kes Apply 2.2.5-postgresql-errors.patch
277 kes Remove unneeded File table index on JobId, which is already
278 present as the first index of another multi-index.
280 kes Set default debug_level to zero. This corrects bugs #991 and #993.
281 kes Fix a crash in bat when it cannot connect to the Director for example
282 if the Director is not running.
284 kes Activate Close button on tray-monitor window. This fixes
287 kes Fix spurious warning message printed when creating a volume with
288 a LabelFormat. This fixes bug #976.
290 Release Version 2.2.5
292 kes Add JobId in place of Job name in all the Jmsg() output.
293 kes Correct the APP_DESC for the Win32 storage service (remove an e).
295 kes Add new SD despooling attributes and Dir inserting attributes
296 job status codes. This fixes bug #961.
297 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
299 kes Fix doc issue. This fixes bug #963.
300 kes Fix listing performance problems in bat. Pointed out by
302 ebl Fix replace on restore. This fixes bug #969
303 kes Fix bat code that tests for Win32. This should fix bug #968
304 kes Query 5 list wrong Vol after migration. This fixes bug #960
306 kes Correct lib/Makefile.in to include enh_fnmatch.o that was removed
307 in back porting from 2.3.x
309 kes Backport almost 4000 lines of 2.3 code that fixes a number of bugs.
310 The details are included in the notes in this file.
312 kes Backport 2.3 code that fixes: it fixes incorrect or incomplete error
313 messages; it fixes a problem opening the SQLite3 database when multiple
314 simultaneous jobs were running; it fixes a bug with certain versions of
315 MySQL where batch inserts failed because of table name character case
316 (upper/lower) differences.
317 kes Fix race condition that drops final block written to volume.
318 This happens in rare cases with multiple simultaneous jobs
319 when the Volume fills. This fixes bug #964. May be related
320 to bug #935 and possibly #903.
322 kes Fix FD->SD authorization failure, which was due to spurious
323 wakeups from a pthread_cond_timedwait(). Simply check the
324 predicate before continuing. This fixes bug #953
325 dvl Add new configuration item --archivedir
326 dvl Adjust regression tests to use tmp not /tmp. This will allow
327 multiple concurrent runs of the regression tests.
329 kes Eliminate more strerror() and replace with bstrerror().
330 kes Remove BSD getopt and replace with unrestricted IBM version.
331 kes Fix Win32 build for changed calling sequences.
333 kes Fix FD->SD authorization failure, which was due to spurious
334 wakeups from a pthread_cond_timedwait(). Simply check the
335 predicate before continuing. This fixes bug #953.
336 kes Add const char where needed (more to do).
338 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
339 kes Don't overwrite error message in check_tables_version.
341 kes Unlock batch insert tables with same calls used elsewhere.
342 kes Allow starting 59 jobs a second.
343 kes Make SD session key more random.
344 kes Add retry for SQLite opening db if it fails. Probably helps
346 kes Suppress extra error messages during batch insert failure.
348 kes Put some FD auth code on dbglvl rather than fixed.
349 kes Return insert attributes error message in db msg buffer to avoid
350 false error messages. Helps fix bug #966.
351 kes Separate batch init error messages. Probably helps fix bug #966.
352 kes If Dir gets an error during inserting attributes, cancel SD.
353 This reduces unnecessary error messages.
355 ebl Cleanup batch insert code. Probably fixes bug #965.
357 kes Turn off some code when batch insert not enabled.
358 kes Edit FD name in connect error messages.
360 kes Add code to handle tray monitor separated from Win32 FD.
361 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
363 kes Fix ANSI tape labeling. This fixes bug #954.
364 kes Increase the max block size to 4MB fixes bug #957.
365 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
366 is not properly mounted (recognized) during a poll.
367 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
368 Job that has differences reports Verify OK.
369 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
371 Release Version 2.2.4
373 kes Increase size of name string when FD making connection to SD.
376 kes Add waits to multiple exit detection code to try to force pid
377 file to always be deleted.
378 kes Restore good dev.tar.gz to rescue set appropriate binary property.
380 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
381 trying to switch drives by checking for blocking before unblocking.
383 kes Cancel storage daemon in all cases where FD reports error. This
384 should fix virtually all cases of bug #920.
386 kes Fix error message that was clobbered when Dir tells SD it does not
387 have write permission on Volume. This should fix a minor point
388 in bug #942, but not the main problem.
389 kes Add code to cancel job in SD if FD connection fails. This should
391 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
392 kes Fix migration code to get correct Volume name with multiple volumes
393 by skipping |. Fixes bug #936.
394 kes Implement patch supplied by Landon to fix bug #944 where using
395 TLS with bconsole uses 99+% of the CPU.
396 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
398 kes Move patches into patches directory.
400 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
403 ebl Using 'm' in bconsole will show messages like before,
404 and not memory usage.
406 Release Version 2.2.3
407 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
410 kes Fix bug #935, and probably also bug #903 where files were not
411 restored. MediaId was not properly set in JobMedia record after
414 kes Add ./configure search in qwt-qt4 for qwt package
415 kes Apply Martin Simmons patch that should turn off the new API usage
416 when batch insert is turned off allowing building on older
419 Release Version 2.2.2
421 ebl Detect if new PosgreSQL batch insert API is present.
422 kes Correct incorrect mempool call causing Director crash.
423 sb Update spec files for 2.2.1 release
425 Release Version 2.2.1
427 kes Update POTFILES.in
428 kes Cleanup a few underquoted AC_DEFUNs in configure
429 kes Apply patch from Martin Simmons that adds a test for va_copy to
432 kes Fix bug #921 by increasing the number of tries to create a new volume
434 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
435 can be called multiple times. Implement a version for machines
436 without va_copy() that gets a big buffer.
438 kes Integrate more portable zone offset code into bsmtp.c
439 Submitted by Attila Fülöp.
441 kes Fix bad SD->FD return status reported by
442 (James Harper) <james.harper@bendigoit.com.au>
443 ebl Fix a bug in read_close_session which return random status
444 thanks to James Harper
446 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
447 and directory names during restore of single file/directories.
448 kes Add sanity checks to .sql command when string is empty. Hopefully
449 that will resolve Dirks Director crash.
451 kes Apply patch submitted by Martin Simmons that corrects a seg fault
452 in the bsmtp chat subroutine when debug is >= 10.
454 kes Fix Director crash when running bat SQL queries.
455 kes Add David's notes on Item 8: Copy pools.
457 kes Rework projects file to be current and ready for a vote.
458 kes Enhance lex scanner error message.
460 kes Tweak LICENSE file to mention BSD code.
461 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
462 if specified on the ./configure.
463 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
464 This class is intended to allow us to open a second bsock to the
465 Director while in the restore subdialog.
467 kes Fix configure to create bat Makefile before creating dependencies.
468 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
469 kes Add a tooltip to the tray monitor.
470 dvl Set the Director's PID file before dropping privs. This fixes
473 kes Update AUTHORs file
474 kes Increase the default max concurrent jobs to 20 in FD and SD to
475 correspond with the default .conf files.
476 kes Rewrite the Win32 service routines. This eliminates the 3 copies
477 some different, of the same file created by RN when porting the
479 kes Rearrange some of the Win32 directories and the placement of the files
481 kes Set DEVELOPER flag in version.h
483 ========================================================================
484 Release Version 2.2.0
486 kes Apply a second doc patch from Marc.
487 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
488 improves the tips section that discusses how to setup multiple
491 kes Update bat README file.
492 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
493 corrects a typo in the Recycle status check in db_find_next_volume().
494 This will probably fix a number of annoying problems with multiple
496 kes Modify most of dird/msgchan.c to use bsock class calls rather than
497 bnet calls -- no functionality change.
499 kes Modify the Verify output to specify if files are missing on
500 the Volume(s) or disk. Fixes confusion in bug #916.
501 kes When more than one Volume is read in a migration job, the last
502 Volume bytes reported are from the last read volume rather than
503 the last written volume. Fixed. This fixes bug #910.
504 kes Fix display of Recycle flag after update volume=foo recycle=yes.
505 It previously printed New Recyle flag is: no. This fixes bug
508 kes Correct seg fault when switching tape drives during restore.
509 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
510 be used until after 2.2.0 release.
512 kes Remove fnmatch() in SD that permitted wild card specifications.
515 kes Fix %g in filename returned by SQL for browse tree reported by
517 kes Fix configure so that it puts config.out in the cwd rather than
519 kes Attempt to fix the locking problem reported by Eric in bug #906.
520 kes Make berrno class to leave errno unchanged after constructor call.
521 kes Make bnet_server use the heap rather than the stack to allocate
522 its socket fd pointers to avoid a crash at termination. Problem
523 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
525 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
526 and putting it in depkgs-qt along with Qt4.3.
528 kes Rework code in acquire.c that switches drives for reading when
529 the Media Type does not match. This should fix bug #906
531 ebl Fix a director segfault during job setup #907
532 kes Correct seg fault in postgresql when first operation returns no
533 rows. Fixes Dirks File browser problem seg fault with bat.
535 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
536 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
539 kes Implement PopUp YES/NO dialog for bat.
541 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
543 kes Correct RunScript to terminate job in FD on failure.
544 kes Change abort_on_error and AbortJobOnError to fail_on_error
545 and FailJobOnError in RunScripts.
546 kes Minor tweaks of code formating in RunScripts, principally to
547 avoid depassing 80 columns.
549 kes Eliminate one #ifdef Win32 in bsmtp
550 kes Implement grow tool to grow a file for testing very large databases.
551 kes Add big-vol-test to test Bacula seeking with > 5GB.
554 kes Modify find_next_volume() to return all values in Media record.
555 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
559 kes Update Release notes
561 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
562 Warning, in previous beta version, all media get from scratch keep their
565 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
566 This should fix bug #842. Made a note to look at removing the temp
567 files at the end of the install.
568 kes Add ability to mount and unmount a file device providing it is
569 marked as being removable and has the appropriate mount and unmount
570 commands defined in the Device resource. This fixes bug #830.
571 kes When applying a storage override, release all previous storage
572 definitions rather than just prepending the new storage.
573 This should prevent a good deal of confusion.
575 kes Implement ./configure search for qwt libraries.
577 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
578 Win32 FD. This should fix bug #893.
579 kes Remove an unnecessary beep in Win32 init code.
580 kes Update copyright dates in Win32 executable about boxes.
581 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
582 code with a BSD getopt.c and getopt.h.
583 kes Remove sched.h from the Win32 compat directory -- not used.
584 kes Remove the Exit menu item from the Win32 tray monitor. If you really
585 need to shut it down, do it through the services panel or the command
587 kes Remove some inappropriate Bacula FSFE copyrights.
588 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
589 kes Fix regress config non-portable test as pointed out by
590 Florian Heigl <florian.heigl@gmail.com>
591 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
592 as pointed out by Florian Heigl <florian.heigl@gmail.com>
594 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
595 Reported by Frank Sweetser.
599 kes Fix client-only build.
600 kes Integrate client-only fixes for bsys (initgroups) and conio from
601 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
602 kes Make arguments to get_scratch_volume() in same order as other
604 kes Rework the prune_volumes() subroutine so that after purging and
605 no volume found in desired pool, it will check for a scratch
606 volume. This prevents recycling the whole scratch pool.
607 kes Add code to status storage to print boffset_t (largefile support).
609 kes Move qwt (Graphics libarary for Qt4) to depkgs.
610 kes You now need a --with-qwt=<dir> to be able to build bat.
611 kes Update src/win32/cats/bacula_cats.def to include the new
612 db_get_query_dbids() call on Win32.
614 kes Correct a problem when selecting a scratch volume and moving
615 it to another pool that lost some columns.
616 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
617 kes Enhance Autochanger error messages to include Volume and device name.
618 kes Rework prune_volumes() code to take account of InChanger flag,
619 and to handle recycling volumes going to the Scratch pool and
620 current pool because the RecyclePool directive.
621 kes Implement a better and more efficient db_get_query_dbids() to
622 handle creating and passing back a list of DBIds.
626 kes Start work on new more efficient DBId subroutine. First use
627 will be for recycling volume to Scratch inchanger.
628 kes Increase number of JobIds in pruning from 1000 to 10000.
629 This to be replaced by above routine.
630 kes Begin implementation of building Qt4 on Win32.
631 kes Correct typo in fix I added for bad TLS shutdown.
632 kes Pull 2.0.3 patches into patches directory.
633 kes Update Release notes. Include qt-console in line count.
634 kes Update Projects file.
636 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
637 bug in migration code where a job that spanned two volumes
640 kes Implement new BST_DESPOOLING blocked state. Change from locking
641 during despooling in SD to blocking. This means that other threads
642 can work with the device structure, in particular the reservations
643 system while despooling.
645 kes Fix return in reservation message queue that missed clearing
646 the jcr lock (implemented 26Jun07 below).
647 kes Rename a number of dev methods to make locking function names
649 kes Document locking in lock.c. Move lock structures to new file
652 kes Move reservations message lock to lock jcr only this
654 kes Move main SD locking code into lock.c (new file).
655 kes Update Win32 build to include lock.c
659 kes Dirk committed the qwt library code for drawing graphs in bat.
660 kes Tweak install of qwt so that it is integrated with ./configure.
662 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
663 out by Eric (my typo).
664 ebl Fix configure.in to get batch mode enable
665 kes Return correct string from authenticate.cpp in bat when connecting
667 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
668 spurious line drops when using TLS.
669 kes Do not file reparse points when restoring a file that already
672 kes Implement Windows reparse points -- similar to directories, but
673 we do not descend into it. This is a first cut. They seem to
674 be backed up, but restore is not yet tested.
675 kes Remove restore_blocking in tls code when shutting a socket to leave
676 it in blocking mode. Hopefully this will fix the encryption bug
677 reported by Frank Sweetser.
678 kes When opening a file for backup, tell the OS that we are going to
679 read it sequentially -- optimization.
680 kes Change variable names in authenticate_director() to not conflict
681 with member names in bat. Caused great confusion with compiler,
684 kes Queue openssl error messages in case of comm problem.
685 kes Do shutdown() call if socket terminated.
686 kes Remove some duplicated code in tls.c
687 kes Move more of the bsock member variables into private and access
689 kes Add Frank Sweetser's tls-test to the regression suite.
691 kes Add Swedish sv.po file
693 kes Don't print clock skew message in FD if less than 3 seconds diff.
694 kes Add a bit of VSS info to status client.
695 kes Implement a first cut of Vista VSS, using Win2003 code.
699 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
700 loaded tape but uses first drive).
701 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
702 This was indeed a Win32 issue.
704 kes Simplify search of autochanger for in-use Volume.
705 kes Fix exit condition of check for in-use volume. kes Remove
706 inappropriate my_postgresql_free_result() in db_close()
708 kes Fix bad return in FD when encryption signature not found.
709 Probably caused a crash.
710 kes Inhibit missing encryption signature error messages for
711 file types where no signature computed.
712 kes Correct inverted check on autochanger in reservation system.
713 kes Tweak debug code in autochanger reservation.
715 kes Add some additional locking in the cats directory in subroutines
716 that modify packet variables called from batch insert.
717 kes Rework how dcrs are allocated. new_dcr() can now be called
718 with an existing pointer, and it will simply clean it up.
719 This allows the reservation system to test various different
720 devices, and will permit easy device changes.
721 kes A bunch of changes all over to handle new new_dcr() calling
723 kes Work more on the Volume management in the SD. Remember Volumes
724 for tape drives and for autochangers (even virtual disk changers).
725 kes When looking at the Volume list to reserve a drive, handle
726 autochanger names correctly by interating through the changer
727 devices. Also call the Director to see if a Volume is suitable
729 kes Fix some bugs in bscan. Make sure all media records are written.
730 Make sure that valid JobMedia records are written for disk files.
731 Previously they were completely wrong.
732 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
733 that the URLs don't change and so that the developers will all
734 work off the same copy. Rebuild from scrach.
735 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
739 kes Fix seg fault in FD from incorrect digest size.
740 kes Fix argument to non-OpenSSL crypto.c subroutine.
744 kes Remove a few malloc()s from the encryption code.
745 kes Use the class calls to bsock in filed/backup.c and restore.c in
746 place of the old bnet_xxx code.
747 kes Implement code that does an on the fly calculation of the
748 signing digest during restore of encrypted files. It makes
749 a best guess at the algorithm, and if it is not correct, will
750 then revert to the old code which reads the file after it is
752 kes Implement at least one missing crypto stream in stream_to_ascii()
753 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
754 #877 where a reload with bad syntax causes Dir to exit.
756 Cut: 2.1.14 beta (not released)
758 kes Do not free a volume on a tape drive until another volume is
759 mounted and read, or the autochanger unloads the volume.
760 This should help the SD re-use volumes that are already mounted,
761 and should fix bug #886.
762 kes Apply patch from user brettedgar that allows gnome2-console include
763 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
764 kes Apply patch from Lucien Weller that fixes day of week calculation
765 because of DST flag problem. Fixes bug #887.
767 kes Move find_next_appendable_volume() to after acquiring a valid device
768 in reserve.c. This fixes bug #864 -- confirmed by reporter.
770 kes Unable to reproduce bug 872. However added additional testing for
772 kes Bug #874 resolved by documenting SQLite limitations.
773 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
774 kes Bug #881 resolved by removing typo in mtx-changer script.
775 kes Made Frank Sweetser's wiki the official Bacula wiki with his
776 approval. Added a link to the wiki on the web page, and implemented
777 a backup from http://paramount.ind.wpi.edu
779 kes Fix update allfrompool to pass pool name.
781 kes Convert to pure GPL v2 license.
782 kes Fix sscanf problems reported by Peter Buschman that caused
783 a bus error on Solaris.
784 kes Rework (simplify) the select prompt in bat.
785 kes Move get_jobid_from_tid() into lib and create a
787 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
788 should definitely fix the problem of lost error messages in the
790 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
791 kes Eliminate tcpd.h from the project. Enclose the #include from the
792 library with extern C ...
793 kes Add print of signal name when a signal is trapped.
797 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
799 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
800 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
801 makes SQLit3 run 30 times faster, though a bit less safe.
802 kes Implement --with-batch-insert in configure and detection of thread
803 safe libraries. It is on by default, but turned off if no thread
804 safe library (e.g. SQLite 2) is available.
806 kes Fix Bacula PostgreSQL buffer overruns.
807 kes Do better checking for NULL results returned from PostgreSQL;
808 implement retry for failed queries; clear results buffer after
809 failed query. Hopefully this will correct the PostgreSQL failures.
811 kes Implement algorithm to handle only one appendable volume with
812 Prefer Mounted Volumes = no.
813 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
814 returned from a query.
815 kes Make volume lock recursive.
816 kes Implement an additional volume reservation algorithm that
817 starts by considering all reserved volumes then uses the
818 old brute force algorithm of searching the resources to
819 find a suitable device.
820 kes Add new reservations debug code and refine the old code.
821 kes Update the win32/dll/bacula.defs file.
823 kes Tweak reservations algorithm to permit a few more cases, i.e.
824 volume reserved, but on different drive, ...
825 kes Enhance SD status to include Pool and Media Type for drive in a
826 more readable format (a bit longer).
827 kes Fix PostgreSQL double free.
829 kes Minor refactoring of restore decryption code.
830 kes Add code to smartall.c to detect double free of a buffer.
832 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
833 so that bsmtp will create a correct email address (mailbox only).
834 kes Modify 'memory' command so that the buffers are listed as 'In use'
835 to avoid confusion with Orphaned buffers.
836 kes I reworked the OpenSSL include/lib flags to be handled in
837 the standard Bacula way, which should fix bug #863 concerning
838 non-standard OpenSSL libraries.
840 kes Implement Help Browser window for bat.
841 kes Fix reload bug that reset StorageId to zero.
843 kes Fix TLS #ifdefing when TLS turned off.
844 kes Ensure that when labelling a tape with Slot=0 that InChanger
846 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
848 kes Add StartTime to final uar_sel_jobid_temp query so that we can
849 add DISTINCT (required by PostgreSQL).
850 kes Implement BSOCK authenticate_director() method. Eventually will
851 authenicate all daemons.
852 kes Move several more functions into the BSOCK class.
854 kes Add code to tell the OS that we no longer need a cached
855 file that we were reading. In findlib/bfile.c. Also,
856 only cache files that we are reading. Thanks to
857 Tobias Oetiker <tobi@oetiker.ch> for the idea.
858 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
859 kes Implement script to automatically generate cats and dll .def
861 kes Update README.mingw32 to include new .def file generation.
862 kes Correct typo in UTF-8 error message as reported by:
863 jhernandez <julianhernandez@gmail.com>
864 kes Add additional sm_check() code on debug level 1.
865 kes Set default debug level to 1.
866 kes Trap SIGABRT in attempt to get traceback.
868 kes Reduce bat connect timeout from 30 to 15 seconds.
869 kes More restructuring and implementing BSOCK class in place of
871 kes Remove a few unnecessary malloc() tests in crypto code.
872 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
873 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
874 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
876 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
878 kes Fix Verify InitCatalog. The attributes were not pointing to the
879 correct saved location.
880 kes Implement message callback so that GUI is sure to get all
881 daemon messages. Currently displayed in a dialog in bat.
882 kes Ignore SIGUSR2 (Bacula timer) in bat.
883 kes Apply regress patch from bug #859 to allow regress to work
884 with Solaris compiler.
886 kes Begin adding TLS support to bat.
887 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
888 clean up lex.c and make it more readable.
890 kes Move more bnet functions into the BSOCK class.
891 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
892 kes Complete change of berrno strerror() method to bstrerror()
896 kes Cleanup incorrect email addresses in bsmtp.
897 kes Make bat display initial messages rather than discard them.
899 kes First cut of adding .mod to the run command.
900 kes Implement auto display of messages in bat.
901 kes Enhanced preferences to allow all Bacula output to be
904 kes Try to make bsmtp date routines more generic.
905 kes Fixed bug #856 autochanger documentation.
906 kes Rework bsmtp date editing for Win32. This fixes bug #854.
907 kes Add new cats entry point so Win32 builds.
909 kes Attempt to fix bsmtp date editing on OSes without %z editing.
911 kes Do better checking for the MySQL 64 bit libraries looking for both
912 .a and .so libraries.
913 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
914 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
915 kes Require the thread safe version of MySQL during configure. Thanks
916 to Andre Noll for pointing this out.
917 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
918 continuing in migration code.
919 kes Apply implementation of tray-monitor font derived from gnome-console
920 submitted by Andreas Piesk <a.piesk@gmx.net>
922 kes Eliminate important memory loss in SQLite
923 kes Fixed the batch insert MySQL thread specific data that was not
924 being freed. See cats/mysql.c:db_thread_cleanup().
925 kes Fix restore before command.
926 kes Convert old hdr.name to name() in a few places.
927 kes Implement update jobid command.
928 kes Return all time_t dates in db_get_job_record()
929 kes Stop watchdog in SD earlier.
930 kes Put Pool just after Storage in please mount message.
931 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
934 kes Update the po files.
935 kes Fix Verify InitCatalog by making it cache attributes.
937 kes Change name bacula-bat to bat for man 1 page to correspond to
939 kes Check for client and store NULL pointers in status command. This
941 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
942 kes Fix sign extended editing of %p.
943 kes Clean out a little old #ifdefing in cats/mysql.c
945 kes If time diff between DIR and FD is more than 600 seconds convert
946 INFO message to WARNING.
947 kes Implement heap size display in status for all daemons.
948 kes Attempt to fix MySQL db open memory loss (not successfull).
949 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
950 kes Eliminate memory loss in MySQL (possibly other SQLs) during
951 Query. This looks like a MySQL but but by doing extra releases,
952 the memory goes away. This should fix bug #847.
954 kes When backup fails, cancel SD before waiting for sd termination.
955 kes If SD is waiting for FD to connect during cancel, wake up the
957 kes Fix fsf code so that errno is correctly reported.
958 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
960 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
961 so that Bacula doesn't later stumble into a seg fault.
962 kes Use the term Restore Client in the restore Job report.
963 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
964 the original job's FileSetId.
965 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
966 spooling in migration jobs. Not yet tested.
967 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
968 reading conf file from a pipe. However, do it with open_bpipe()
969 rather than popen. Not yet tested.
971 kes Fix an ugly bug where the VolCatBytes were getting updated
973 kes Implement bconsole memory command that prints current memory
974 usage, plus smartalloc dump.
975 kes Clarify some error messages in backup, admin, and migrate.
976 kes Shrink label dialog to smaller size.
977 kes Invert Cancel OK buttons on restore to be OK Cancel.
978 kes More strerror() to bstrerror() conversions.
980 kes Start implementing bstrerror() in place of strerror().
981 kes Stripping path -- seems to work.
983 kes Prevent door and port files from being restored (mostly
985 kes Free an unreleased buffer in compat code.
986 kes Change console Job name from *Console* to -Console- to eliminate
987 Win32 filename problems. Put Win32 path separator when creating
988 Console file. This fixes bug #846.
989 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
991 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
993 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
994 to force Win32 error message.
996 kes First cut strip path. The data should be passed to the FD,
997 but nothing is done with it yet.
998 kes Enhance the digest and signature routines in the crypto
999 library to accept a JCR and to use it to print error messages
1000 so that they will go in the Job report rather than the daemon's
1002 kes Simplify some of the verify signature code.
1003 kes Simplify a few of the alternative returns in the signature
1006 ebl Use only POSIX regex instead of GNU regex in breg.c for
1007 File relocation. It fix broken freebsd compilation.
1008 kes Convert all other Dir files to use new ua class message
1010 kes Tentative fix for missing digest signature in bug 807.
1011 kes Correct handle problem in new win32_ftruncate routine.
1012 kes Convert ua_purge.c and ua_update.c to use new ua class
1013 message routines for bat.
1015 kes Correct incorrect installation of LICENSE in Win32 installer.
1016 kes Display LICENSE at the beginning of the Win32 install.
1017 kes Attempt to correct the need for the png files to be installed
1019 kes Reapply my bat.conf install script in qt-console. I think I
1020 editted bat.pro instead of bat.pro.in and it was lost.
1021 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1022 the /var/lock/subsys for subsysdir. Also corrects typos in the
1025 kes First cut update job.
1026 kes Correct configure to include qmake of src/qt-console directory.
1028 kes Make restore job yes/mod/no print in one command so GUI works.
1029 kes First cut implementing backup and restore client.
1030 kes Correct editing in Verify output that caused a seg fault.
1032 kes Insure that bat.conf is not overwritten during installation.
1033 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1034 while I was implementing migration in March 2006 !
1036 ebl Cleanup file relocation, using char *RegexWhere instead of
1037 char *where + bool where_use_regexp
1038 kes Update some manpages and add bat manpage.
1039 kes Make a first cut at converting bacula.spec.in for bwx-console
1041 kes Apply patch from John Goerzen to add hostname as fourth argument
1042 to make_catalog_backup script.
1043 kes Fix typos I introduced into bsmtp.c
1044 kes Make pm_strxxx() routines handle input of NULL pointer. This
1045 is to protect from NULL pointers returned from SQL databases.
1046 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1047 kes Add more debug to FIFO code -- fix fifo regression test.
1049 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1050 kes Add thread timer to bnet_connect() to break from OS if wait time
1053 kes Update Win32 build to include new files, new symbols, and
1055 kes Implement socket level heartbeat (tcp_keepidle)
1056 ebl Commit File relocation patch
1057 kes Make bat have 'make install' target.
1058 kes Warn during install if old gnome-console binary found.
1059 kes Warn during install if old wx-console binary found.
1060 kes Add -8 option to bsmtp command line to add content type utf-8.
1061 Fixes bug #809. (Character coding problem in bsmtp).
1062 kes If < is found in target (from, to, cc) then do not enclose the
1063 target in < > in bsmtp. Fixes bug #772 (malformed address).
1064 kes When printing certain items in dbcheck, stop after 300000.
1065 Fixes bug #822. (dbcheck loops).
1066 kes Incorrect status in Dir after waiting for mount with poll set.
1069 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1071 kes Print waiting to reserve a device every 5 mins.
1073 kes Don't call close_part in label.c if tape and relabel.
1074 kes Don't free volume if busy in close() -- should help with
1076 ebl Fix #824 RunScript bug (After script could be execute twice)
1077 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1078 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1079 Add a regression script to test RunScript
1081 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1084 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1085 deprecated. No additional bugs will be fixed, and they will be dropped
1086 in a future release (probably 2.4.0).
1087 kes Change name of wx-console to bwx-console to make it more Bacula
1089 kes Change the name of gnome-console to bgnome-console to make it
1092 kes Some time in March, a Feature Request with patch from Jorj Bauer
1093 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1095 The ability for the director to validate a Client (FD) CN against
1096 an arbitrary set of patterns rather than the hostname, with
1097 A new 'TLS Allowed CN' set of directives which are implemented
1098 in the Client resource. Then pattern matching is used in place
1099 of hostname matching against the Certificate's CN. As an example, we
1100 have certificates which (a) use a local CA, and (b) have a CN of the
1102 kes Add new/changed entry points to Win32 build
1103 kes Create unaccepted-projects for projects that are not accepted.
1104 kes Simplify locking in the reservations system.
1105 kes Add more debug code in reservations.
1106 kes Make sure error condition on reserving a volume is handled correctly.
1107 kes Correct handling of volume_in_use.
1108 kes Correct handling of initializing a device.
1109 kes Move handling of broadcasting releasing a device into release_device().
1110 kes Correct attaching dcr to dev so that it is only done if device
1111 is properly initiated.
1113 kes Locking debug level tweaks in SD.
1114 kes Tweak new Volume code.
1116 kes Add exec external-command [wait-seconds] to bconsole. This
1117 executes the external-command. Note! normally external-command
1118 should be enclosed in double quotes.
1119 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1120 it should normally be off in a production system.
1122 kes Implement die command for SD so that we can force it to dump.
1123 kes Implement SD lock debug code.
1124 kes Implement new algorithm for keeping Volume list in SD. It
1125 is now owned by the device.
1127 kes Implement new code for freeing in use volumes that should
1128 resolve if not all, some of the problems of multiple drive
1129 tape conflicts described in bug 801.
1131 kes Fix gui/bacula-web/images files in svn.
1132 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1134 ebl Fix a bug in batch mode (in string escape)
1135 kes Correct migration prune SQL typo that crept in in a
1136 recent 2.1.x change.
1138 kes Move bnet_despool() into class in bsock.c
1139 kes Modify job report to include director name and Build OS.
1140 kes Move drop root privilege and check_catalog() before fork.
1141 kes Add update database scripts (version 9 to 10) to updatedb directory.
1143 ebl Check size and age of each file after its backup to see if
1144 it has changed during backup, if 'checkfilechanges' is set.
1145 The FD will do an extra check (stat(2)) after
1146 each file backup. mtime, ctime and size are compared with
1147 'before backup' information. If time or size mismatch, an
1148 error message will be generated. You must upgrade FD to use it.
1150 kes Make database name and user configurable
1151 --with-db-name=xxx --with-db-user=xxx
1152 kes Add back database type to message.c for debugging.
1154 kes Implement dir_sql() which issues an SQL query.
1155 kes Modify bat medialist to use dir_sql() and do some minor C++
1156 formatting as well as eliminating a number of pointers, simplifing
1159 kes Fix some of the mtx-changer grep commands for tape label readers.
1160 kes Convert a number of bsendmsg into the appropriate send/warning/error
1161 message class calls.
1162 kes Suppress the using database message in the .sql command.
1163 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1165 kes Add context menu for floating a window.
1166 kes Some minor cleanup and name changes in qt-console
1167 kes Add doing mt setblk 0 in Win32 mtx-changer.
1168 kes Apply Martin's bug fix to move definition of ENODATA for
1170 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1171 sqlite2 and sqlite3.
1173 kes More pruning cleanup.
1174 kes Turn on wait_for_drive by default in mtx-changer.
1175 kes Turn on Batch insert code by default as it now passes regression.
1176 kes Add ./configure --enable-bat to enable building of Bat.
1177 No install yet though.
1179 kes Implement a new .sql command for bat.
1180 kes Implement code to turn off pruning in obtaining the next volume.
1181 Pruning is turned off for the status dir command, but turned on
1182 for SD requests and for the list nextvolume command.
1184 kes Correct Qmsg() that was not updated correctly when committing a
1185 previous change (probably the recent TLS patch).
1187 kes Write new subroutine is_volume_purged() that explicitly checks
1188 if the Volume is purged, and if so marks it as such. This should
1189 resolve problems reported about needing to mount twice to recycle
1191 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1192 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1193 amount of duplicated code.
1194 kes Do volume pruning only for the Media Type desired (reduces pruning time
1195 if multiple Media Types are in the same pool).
1196 kes Implement more detailed info in the Job report for the Bacula version
1198 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1200 ebl Add bbatch tool to bench database and insert mode.
1201 Fix sql quote stuff in batch mode
1202 Fix sql stuff for mysql
1204 kes Correct problems with am/pm scheduling. Fixes bug #808.
1205 kes Implement new prunning code that prunes up to 1000 jobs at
1206 the same time. The same technique can be applied to a number
1207 of other prune/purge subroutines.
1208 kes Add an insanity check when starting a new tape job to ensure
1209 that the tape position has not been changed. If so fail the
1211 kes Fix Win32 build for dlls to add the folllowing:
1212 src/lib/bsock.c -- new file with new entry points
1213 src/lib/dlist.c -- new entry points
1214 src/cats/sql_create.c -- new entry point
1215 src/cats/sql_cmds.c -- new DATA item exported
1217 ebl batch mode cleanup bscan-test is ok now.
1218 kes Implement SD code to check length of disk volume before appending.
1220 kes Correct return status on db_batch... routines.
1221 kes Add call to db_write_batch_file_records() to migration code.
1222 ebl Fix AfterJob timing
1223 kes Move the checking of the database in initializion of the Director
1224 to after we drop privileges. This avoids the need for both root
1225 and bacula access to the DB.
1226 kes Correct a misplaced variable definition in src/filed/backup.c
1227 kes Correct how the new batch insert db_create_attributes_record()
1228 uses the arguments. Caused a seg fault in bscan.
1229 kes Implement lock() and unlock() methods in DEVICE class.
1230 Implement block() and set_block(xx) methods in DEVICE class.
1231 kes Modify bnet_connect() so that it uses time() to check for the
1232 wait time expiring (on some OSes, some system calls may not
1233 return immediately).
1234 kes Modify Verify to obtain the previous JobId when it is actually
1235 running rather than at schedule time (as it was in 1.38.x).
1236 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1238 kes When checking pid in pid file, continue running if the pid is
1239 the same as ours. This occurs on IRIX after a system crash.
1242 kes Extend new GUI API.
1243 kes Make the ua structure a class, and implement send_msg(),
1244 error_msg(), warning_msg(), and info_msg().
1246 kes Apply fix from for building wx-console on the Mac from
1248 kes Implement new select mechanism for GUI programs.
1249 kes Reorganize initialization of stackedWidgets in bat.
1251 kes Add updated nagios plugin supplied by Christian Masopust.
1253 kes More bat implementation.
1254 kes File migrate bug with Pool Occupancy using mediaid instead
1255 of jobids. Fixes bug #795.
1256 kes Fix orphaned buffers in filed backup and verify due to
1257 crypto buffers not freed during errors. Fixes bug #789.
1258 kes Extend new GUI api code to tree commands.
1259 kes Ensure that tree and dot commands check console ACLs.
1260 kes Permit marking directory with trailing slash.
1261 kes Allow 20 console connections (instead of only 10).
1263 kes Add smartctl call to bacula-sd.conf as an example of getting
1266 kes Modify jobq.c to let simultaneous restore jobs run. This may
1267 cause them to fail if they cannot get a drive.
1268 kes Add Client Connect Wait to Storage daemon to permit users to
1269 modify the time the SD waits for a FD connection.
1271 kes Correct virtual changer check which was backwards. This caused
1272 volumes to be unloaded into slots already occupied.
1274 kes Apply Command ACL filter to JobId list in restore command.
1275 kes Correct typeo in var.c patch.
1277 kes Don't let Bacula prune File or Job records for the current Job.
1278 kes Fix variable substitution pad + inc bug reported (with patch)
1281 kes Correct SQLite log table index as reported by Luca Berra.
1283 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1285 kes Begin implementing new comm signals for API.
1286 kes Fix a few places in lib/message.c where the open fd may
1288 kes Continue implementing lib/bsock.c (real class). Make jcr,
1289 who, host, and port private. There are new methods to access
1290 them for non-class use. This required touching a number of files.
1292 kes Add LANG=C to autoconf/randpass so it works with languages other
1293 than English. Fixes bug #788.
1295 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1297 You will not be able to generate Include/Exclude list any more.
1298 It will be fixed soon.
1299 If you want to use this, you can apply
1300 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1302 kes Restore of sockets created false error messages because Bacula
1303 no longer restores sockets, but the code was still trying to
1304 set the attributes on a non-existent file. Reported by a user.
1305 ebl finish RecyclePool feature
1306 Media will takes Pool.RecyclePool
1307 when moving from Scratch to a Pool or when user will do
1308 update volume=xxx frompool
1309 To use it, add RecyclePool = aPool to your Pool resource
1312 RecyclePool = Scratch
1316 kes Expand new BSOCK class adding signal() and new BNET signals.
1317 kes Begin enhancing the dot commands adding a new API function
1318 that returns more information and will make it easier
1319 to interface to the Director from a program.
1321 kes Make DEVICE fd private. Its new name is m_fd, and can be
1322 obtained with dev->fd() outside the class. This is the
1323 first of many DEVICE members to be made private.
1324 kes Implement Michael Renner's idea on having a virtual disk
1325 changer. I made some minor modifications (e.g. I did not
1326 implement the Virtual Changer directive, but simply set
1327 the Changer Command to an empty string.
1329 kes Implement a BSOCK send() method that writes the whole record
1330 in a single write() request rather than in two.
1331 ebl add update volume=xxx recyclepool=yyyy
1332 volume takes recyclepool from pool when using update volume=xxx from pool
1334 kes Fix encryption deblocking bug, which caused some restored files
1335 to be truncated. This fixes bug #763.
1336 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1337 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1339 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1340 ebl Use btime_t instead of uint64_t in media patch.
1342 kes Optimize the use of the database a bit in the Status dir command.
1343 Only open it when needed, ensure that if any previous database
1344 was opened, it is closed.
1346 kes Correct VolCatBytes bug from media patch.
1347 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1348 in the case of orphaned records.
1349 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1350 and File records in 300K chunks to be more efficient. This
1351 idea came from Juan Luis Frances (if I remember right).
1352 kes Apply Eric's scratch patch that moves a purged Volume to
1353 the RecyclePool. Question: how is RecyclePool set? what
1354 happens to the ScratchPool?
1355 kes Apply Eric's media patch that collects read/write media
1356 times as well as byte counts. This patch requires a
1357 simultaneous upgrade of the DIR and SD. Note, there
1358 should be some way to turn off timing. I'm not sure
1359 times are in Bacula units.
1360 kes Apply Eric's batch-insert patch.
1362 kes Update projects list.
1364 kes Implement Include/Exclude file lists in FD as dlists using
1365 the new dlistString class. This permits efficiently having
1366 large include/exclude lists and completes project Item 25.
1367 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1368 console is authorized to cancel the job. This fixes bug
1370 kes Modify SD so that the VolCatJobs medium record is updated
1371 at the beginning of a Job rather than the end. This
1372 fixes bug #775 where exceeding MaxVolJobs caused jobs
1374 kes Added a mutex around getting and setting Volume information
1375 so that multiple simultaneous jobs will single thread.
1377 Switch to using Subversion
1378 kes Remove src/pygtk-console/ from configure
1380 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1381 plus the entrypoints.
1382 kes Apply patch supplied that corrects debug print
1383 in canceling jobs for max run time. Supplied as
1384 part of bug #621, which was previously fixed.
1386 kes Test on job_canceled() and sd_msg_thread_done inside
1387 loop starting the message thread to avoid a race condition.
1389 kes Remove rl_catch_signal from console.c as it conflicted
1390 with the header definition. Fixes bug #765.
1391 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1393 kes Clarify some stored/acquire messages to indicate if the
1394 problem is with read or append.
1396 kes Fix memory leak with storage ids in cats/sql_get.c
1397 kes Terminate watchdog earlier to avoid reference to released
1398 memory -- reported by Jason Austin.
1399 kes Move closing the database from jobq.c to the director daemon
1400 termination routine. This fixes memory leaks for shadow jobs
1401 (i.e. migration jobs).
1402 kes Free up the unique jobid chain items in migrate.c. This fixes
1403 a memory leak problem.
1404 kes Convert some ugly looking for statements to use foreach_alist
1405 in findlib/find.c. This will facilitate converting the structures
1406 to use dlist (for large include/exclude lists).
1407 kes Fix a bug in the btree.c and btree.h routines, then rename them
1408 rblist and add them to be built in src/lib. Include some new
1409 methods written by Rudolf Cejka that make the code more readable
1410 (hides some of the ugly casting).
1411 kes Add set_next() and set_prev() methods which make the code much more
1412 readable. Also add a new dlistString class that facilitates storing
1413 strings in dlists. To be used in the large include/exclude lists.
1414 kes Make some trivial modifications to lib/tree.h that use rblist
1415 rather than dlist for storing the tree links. This was suggested
1416 by Rudolf Cejka. The result of this is that the restore tree now
1417 uses red-black binary trees rather than simple linked lists. This
1418 should give rather dramatic speed improvements for directories
1419 contining large numbers of directories/files (more than 10000).
1421 kes Fix maxruntime bug #621.
1423 ebl Implement the include JobID in spool file name project.
1424 kes Reorder projects file in order determined by Jan 2007 vote.
1425 kes Implement item #12 on project list -- quick release of FD by
1427 kes Fix open of SQLite3 db where user does not have write permission
1428 so that DIR does not crash. Fixes bug #761.
1430 kes Add back missing @ in Win32 Makefile.
1431 kes Change 'Device not configured to autolabel' from INFO
1433 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1434 which should restart an indefinite # of times.
1435 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1436 other DIR specifications.
1438 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1439 Fix path quoting in SQLite scripts.
1440 Fix problems with SHGetFolderPath.
1442 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1444 kes Fix Job restart on error bug that promotes an Inc to a Full
1445 backup. This should fix bug #755.
1446 kes Add qt-console and first cut of code.
1450 kes Fix Bacula->Documentation link on Win32 to point to index.html
1451 instead of bacula.html. Fixed bug #750.
1452 kes Return JobId in db_get_job_record() when JobId==0. This should
1454 kes Do not release source pointers when restarting a failed job.
1456 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1457 This *should* fix bug #747.
1458 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1461 kes Modify USTORE constructor to set an empty store_source string,
1462 and don't copy the store_source string in a cancel. Hopefully
1463 this will fix Arno's seg fault, bug #744.
1464 kes Add back code to disable conio in configure. Fixes bug #743.
1465 kes Correct the Options scanner in the FD to correctly handle
1466 SHA1 option, which was eating the next option. Reported by
1468 kes Add code to indicate when the SD is spooling, spool wait, and
1469 despooling as requested by Alan Brown.
1471 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob