1 Technical notes on version 2.2
5 kes Backport 2.3 code that fixes: it fixes incorrect or incomplete error
6 messages; it fixes a problem opening the SQLite3 database when multiple
7 simultaneous jobs were running; it fixes a bug with certain versions of
8 MySQL where batch inserts failed because of table name character case
9 (upper/lower) differences.
10 kes Fix race condition that drops final block written to volume.
11 This happens in rare cases with multiple simultaneous jobs
12 when the Volume fills. This fixes bug #964. May be related
13 to bug #935 and possibly #903.
15 kes Fix FD->SD authorization failure, which was due to spurious
16 wakeups from a pthread_cond_timedwait(). Simply check the
17 predicate before continuing. This fixes bug #953
19 kes Add code to handle tray monitor separated from Win32 FD.
20 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
22 kes Fix ANSI tape labeling. This fixes bug #954.
23 kes Increase the max block size to 4MB fixes bug #957.
24 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
25 is not properly mounted (recognized) during a poll.
26 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
27 Job that has differences reports Verify OK.
31 kes Increase size of name string when FD making connection to SD.
34 kes Add waits to multiple exit detection code to try to force pid
35 file to always be deleted.
36 kes Restore good dev.tar.gz to rescue set appropriate binary property.
38 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
39 trying to switch drives by checking for blocking before unblocking.
41 kes Cancel storage daemon in all cases where FD reports error. This
42 should fix virtually all cases of bug #920.
44 kes Fix error message that was clobbered when Dir tells SD it does not
45 have write permission on Volume. This should fix a minor point
46 in bug #942, but not the main problem.
47 kes Add code to cancel job in SD if FD connection fails. This should
49 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
50 kes Fix migration code to get correct Volume name with multiple volumes
51 by skipping |. Fixes bug #936.
52 kes Implement patch supplied by Landon to fix bug #944 where using
53 TLS with bconsole uses 99+% of the CPU.
54 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
56 kes Move patches into patches directory.
58 ebl Fix bug #946 about "bacula-dir -t" which doesn't works
61 ebl Using "m" in bconsole will show messages like before,
65 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
68 kes Fix bug #935, and probably also bug #903 where files were not
69 restored. MediaId was not properly set in JobMedia record after
72 kes Add ./configure search in qwt-qt4 for qwt package
73 kes Apply Martin Simmons patch that should turn off the new API usage
74 when batch insert is turned off allowing building on older
79 ebl Detect if new PosgreSQL batch insert API is present.
80 kes Correct incorrect mempool call causing Director crash.
81 sb Update spec files for 2.2.1 release
85 kes Update POTFILES.in
86 kes Cleanup a few underquoted AC_DEFUNs in configure
87 kes Apply patch from Martin Simmons that adds a test for va_copy to
90 kes Fix bug #921 by increasing the number of tries to create a new volume
92 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
93 can be called multiple times. Implement a version for machines
94 without va_copy() that gets a big buffer.
96 kes Integrate more portable zone offset code into bsmtp.c
97 Submitted by Attila Fülöp.
99 kes Fix bad SD->FD return status reported by
100 (James Harper) <james.harper@bendigoit.com.au>
101 ebl Fix a bug in read_close_session which return random status
102 thanks to James Harper
104 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
105 and directory names during restore of single file/directories.
106 kes Add sanity checks to .sql command when string is empty. Hopefully
107 that will resolve Dirks Director crash.
109 kes Apply patch submitted by Martin Simmons that corrects a seg fault
110 in the bsmtp chat subroutine when debug is >= 10.
112 kes Fix Director crash when running bat SQL queries.
113 kes Add David's notes on Item 8: Copy pools.
115 kes Rework projects file to be current and ready for a vote.
116 kes Enhance lex scanner error message.
118 kes Tweak LICENSE file to mention BSD code.
119 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
120 if specified on the ./configure.
121 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
122 This class is intended to allow us to open a second bsock to the
123 Director while in the restore subdialog.
125 kes Fix configure to create bat Makefile before creating dependencies.
126 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
127 kes Add a tooltip to the tray monitor.
128 dvl Set the Director's PID file before dropping privs. This fixes
131 kes Update AUTHORs file
132 kes Increase the default max concurrent jobs to 20 in FD and SD to
133 correspond with the default .conf files.
134 kes Rewrite the Win32 service routines. This eliminates the 3 copies
135 some different, of the same file created by RN when porting the
137 kes Rearrange some of the Win32 directories and the placement of the files
139 kes Set DEVELOPER flag in version.h
141 ========================================================================
142 Release Version 2.2.0
144 kes Apply a second doc patch from Marc.
145 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
146 improves the tips section that discusses how to setup multiple
149 kes Update bat README file.
150 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
151 corrects a typo in the Recycle status check in db_find_next_volume().
152 This will probably fix a number of annoying problems with multiple
154 kes Modify most of dird/msgchan.c to use bsock class calls rather than
155 bnet calls -- no functionality change.
157 kes Modify the Verify output to specify if files are missing on
158 the Volume(s) or disk. Fixes confusion in bug #916.
159 kes When more than one Volume is read in a migration job, the last
160 Volume bytes reported are from the last read volume rather than
161 the last written volume. Fixed. This fixes bug #910.
162 kes Fix display of Recycle flag after update volume=foo recycle=yes.
163 It previously printed New Recyle flag is: no. This fixes bug
166 kes Correct seg fault when switching tape drives during restore.
167 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
168 be used until after 2.2.0 release.
170 kes Remove fnmatch() in SD that permitted wild card specifications.
173 kes Fix %g in filename returned by SQL for browse tree reported by
175 kes Fix configure so that it puts config.out in the cwd rather than
177 kes Attempt to fix the locking problem reported by Eric in bug #906.
178 kes Make berrno class to leave errno unchanged after constructor call.
179 kes Make bnet_server use the heap rather than the stack to allocate
180 its socket fd pointers to avoid a crash at termination. Problem
181 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
183 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
184 and putting it in depkgs-qt along with Qt4.3.
186 kes Rework code in acquire.c that switches drives for reading when
187 the Media Type does not match. This should fix bug #906
189 ebl Fix a director segfault during job setup #907
190 kes Correct seg fault in postgresql when first operation returns no
191 rows. Fixes Dirks File browser problem seg fault with bat.
193 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
194 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
197 kes Implement PopUp YES/NO dialog for bat.
199 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
201 kes Correct RunScript to terminate job in FD on failure.
202 kes Change abort_on_error and AbortJobOnError to fail_on_error
203 and FailJobOnError in RunScripts.
204 kes Minor tweaks of code formating in RunScripts, principally to
205 avoid depassing 80 columns.
207 kes Eliminate one #ifdef Win32 in bsmtp
208 kes Implement grow tool to grow a file for testing very large databases.
209 kes Add big-vol-test to test Bacula seeking with > 5GB.
212 kes Modify find_next_volume() to return all values in Media record.
213 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
217 kes Update Release notes
219 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
220 Warning, in previous beta version, all media get from scratch keep their
223 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
224 This should fix bug #842. Made a note to look at removing the temp
225 files at the end of the install.
226 kes Add ability to mount and unmount a file device providing it is
227 marked as being removable and has the appropriate mount and unmount
228 commands defined in the Device resource. This fixes bug #830.
229 kes When applying a storage override, release all previous storage
230 definitions rather than just prepending the new storage.
231 This should prevent a good deal of confusion.
233 kes Implement ./configure search for qwt libraries.
235 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
236 Win32 FD. This should fix bug #893.
237 kes Remove an unnecessary beep in Win32 init code.
238 kes Update copyright dates in Win32 executable about boxes.
239 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
240 code with a BSD getopt.c and getopt.h.
241 kes Remove sched.h from the Win32 compat directory -- not used.
242 kes Remove the Exit menu item from the Win32 tray monitor. If you really
243 need to shut it down, do it through the services panel or the command
245 kes Remove some inappropriate Bacula FSFE copyrights.
246 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
247 kes Fix regress config non-portable test as pointed out by
248 Florian Heigl <florian.heigl@gmail.com>
249 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
250 as pointed out by Florian Heigl <florian.heigl@gmail.com>
252 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
253 Reported by Frank Sweetser.
257 kes Fix client-only build.
258 kes Integrate client-only fixes for bsys (initgroups) and conio from
259 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
260 kes Make arguments to get_scratch_volume() in same order as other
262 kes Rework the prune_volumes() subroutine so that after purging and
263 no volume found in desired pool, it will check for a scratch
264 volume. This prevents recycling the whole scratch pool.
265 kes Add code to status storage to print boffset_t (largefile support).
267 kes Move qwt (Graphics libarary for Qt4) to depkgs.
268 kes You now need a --with-qwt=<dir> to be able to build bat.
269 kes Update src/win32/cats/bacula_cats.def to include the new
270 db_get_query_dbids() call on Win32.
272 kes Correct a problem when selecting a scratch volume and moving
273 it to another pool that lost some columns.
274 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
275 kes Enhance Autochanger error messages to include Volume and device name.
276 kes Rework prune_volumes() code to take account of InChanger flag,
277 and to handle recycling volumes going to the Scratch pool and
278 current pool because the RecyclePool directive.
279 kes Implement a better and more efficient db_get_query_dbids() to
280 handle creating and passing back a list of DBIds.
284 kes Start work on new more efficient DBId subroutine. First use
285 will be for recycling volume to Scratch inchanger.
286 kes Increase number of JobIds in pruning from 1000 to 10000.
287 This to be replaced by above routine.
288 kes Begin implementation of building Qt4 on Win32.
289 kes Correct typo in fix I added for bad TLS shutdown.
290 kes Pull 2.0.3 patches into patches directory.
291 kes Update Release notes. Include qt-console in line count.
292 kes Update Projects file.
294 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
295 bug in migration code where a job that spanned two volumes
298 kes Implement new BST_DESPOOLING blocked state. Change from locking
299 during despooling in SD to blocking. This means that other threads
300 can work with the device structure, in particular the reservations
301 system while despooling.
303 kes Fix return in reservation message queue that missed clearing
304 the jcr lock (implemented 26Jun07 below).
305 kes Rename a number of dev methods to make locking function names
307 kes Document locking in lock.c. Move lock structures to new file
310 kes Move reservations message lock to lock jcr only this
312 kes Move main SD locking code into lock.c (new file).
313 kes Update Win32 build to include lock.c
317 kes Dirk committed the qwt library code for drawing graphs in bat.
318 kes Tweak install of qwt so that it is integrated with ./configure.
320 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
321 out by Eric (my typo).
322 ebl Fix configure.in to get batch mode enable
323 kes Return correct string from authenticate.cpp in bat when connecting
325 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
326 spurious line drops when using TLS.
327 kes Do not file reparse points when restoring a file that already
330 kes Implement Windows reparse points -- similar to directories, but
331 we do not descend into it. This is a first cut. They seem to
332 be backed up, but restore is not yet tested.
333 kes Remove restore_blocking in tls code when shutting a socket to leave
334 it in blocking mode. Hopefully this will fix the encryption bug
335 reported by Frank Sweetser.
336 kes When opening a file for backup, tell the OS that we are going to
337 read it sequentially -- optimization.
338 kes Change variable names in authenticate_director() to not conflict
339 with member names in bat. Caused great confusion with compiler,
342 kes Queue openssl error messages in case of comm problem.
343 kes Do shutdown() call if socket terminated.
344 kes Remove some duplicated code in tls.c
345 kes Move more of the bsock member variables into private and access
347 kes Add Frank Sweetser's tls-test to the regression suite.
349 kes Add Swedish sv.po file
351 kes Don't print clock skew message in FD if less than 3 seconds diff.
352 kes Add a bit of VSS info to status client.
353 kes Implement a first cut of Vista VSS, using Win2003 code.
357 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
358 loaded tape but uses first drive).
359 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
360 This was indeed a Win32 issue.
362 kes Simplify search of autochanger for in-use Volume.
363 kes Fix exit condition of check for in-use volume. kes Remove
364 inappropriate my_postgresql_free_result() in db_close()
366 kes Fix bad return in FD when encryption signature not found.
367 Probably caused a crash.
368 kes Inhibit missing encryption signature error messages for
369 file types where no signature computed.
370 kes Correct inverted check on autochanger in reservation system.
371 kes Tweak debug code in autochanger reservation.
373 kes Add some additional locking in the cats directory in subroutines
374 that modify packet variables called from batch insert.
375 kes Rework how dcrs are allocated. new_dcr() can now be called
376 with an existing pointer, and it will simply clean it up.
377 This allows the reservation system to test various different
378 devices, and will permit easy device changes.
379 kes A bunch of changes all over to handle new new_dcr() calling
381 kes Work more on the Volume management in the SD. Remember Volumes
382 for tape drives and for autochangers (even virtual disk changers).
383 kes When looking at the Volume list to reserve a drive, handle
384 autochanger names correctly by interating through the changer
385 devices. Also call the Director to see if a Volume is suitable
387 kes Fix some bugs in bscan. Make sure all media records are written.
388 Make sure that valid JobMedia records are written for disk files.
389 Previously they were completely wrong.
390 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
391 that the URLs don't change and so that the developers will all
392 work off the same copy. Rebuild from scrach.
393 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
397 kes Fix seg fault in FD from incorrect digest size.
398 kes Fix argument to non-OpenSSL crypto.c subroutine.
402 kes Remove a few malloc()s from the encryption code.
403 kes Use the class calls to bsock in filed/backup.c and restore.c in
404 place of the old bnet_xxx code.
405 kes Implement code that does an on the fly calculation of the
406 signing digest during restore of encrypted files. It makes
407 a best guess at the algorithm, and if it is not correct, will
408 then revert to the old code which reads the file after it is
410 kes Implement at least one missing crypto stream in stream_to_ascii()
411 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
412 #877 where a reload with bad syntax causes Dir to exit.
414 Cut: 2.1.14 beta (not released)
416 kes Do not free a volume on a tape drive until another volume is
417 mounted and read, or the autochanger unloads the volume.
418 This should help the SD re-use volumes that are already mounted,
419 and should fix bug #886.
420 kes Apply patch from user brettedgar that allows gnome2-console include
421 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
422 kes Apply patch from Lucien Weller that fixes day of week calculation
423 because of DST flag problem. Fixes bug #887.
425 kes Move find_next_appendable_volume() to after acquiring a valid device
426 in reserve.c. This fixes bug #864 -- confirmed by reporter.
428 kes Unable to reproduce bug 872. However added additional testing for
430 kes Bug #874 resolved by documenting SQLite limitations.
431 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
432 kes Bug #881 resolved by removing typo in mtx-changer script.
433 kes Made Frank Sweetser's wiki the official Bacula wiki with his
434 approval. Added a link to the wiki on the web page, and implemented
435 a backup from http://paramount.ind.wpi.edu
437 kes Fix update allfrompool to pass pool name.
439 kes Convert to pure GPL v2 license.
440 kes Fix sscanf problems reported by Peter Buschman that caused
441 a bus error on Solaris.
442 kes Rework (simplify) the select prompt in bat.
443 kes Move get_jobid_from_tid() into lib and create a
445 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
446 should definitely fix the problem of lost error messages in the
448 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
449 kes Eliminate tcpd.h from the project. Enclose the #include from the
450 library with extern C ...
451 kes Add print of signal name when a signal is trapped.
455 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
457 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
458 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
459 makes SQLit3 run 30 times faster, though a bit less safe.
460 kes Implement --with-batch-insert in configure and detection of thread
461 safe libraries. It is on by default, but turned off if no thread
462 safe library (e.g. SQLite 2) is available.
464 kes Fix Bacula PostgreSQL buffer overruns.
465 kes Do better checking for NULL results returned from PostgreSQL;
466 implement retry for failed queries; clear results buffer after
467 failed query. Hopefully this will correct the PostgreSQL failures.
469 kes Implement algorithm to handle only one appendable volume with
470 Prefer Mounted Volumes = no.
471 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
472 returned from a query.
473 kes Make volume lock recursive.
474 kes Implement an additional volume reservation algorithm that
475 starts by considering all reserved volumes then uses the
476 old brute force algorithm of searching the resources to
477 find a suitable device.
478 kes Add new reservations debug code and refine the old code.
479 kes Update the win32/dll/bacula.defs file.
481 kes Tweak reservations algorithm to permit a few more cases, i.e.
482 volume reserved, but on different drive, ...
483 kes Enhance SD status to include Pool and Media Type for drive in a
484 more readable format (a bit longer).
485 kes Fix PostgreSQL double free.
487 kes Minor refactoring of restore decryption code.
488 kes Add code to smartall.c to detect double free of a buffer.
490 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
491 so that bsmtp will create a correct email address (mailbox only).
492 kes Modify 'memory' command so that the buffers are listed as 'In use'
493 to avoid confusion with Orphaned buffers.
494 kes I reworked the OpenSSL include/lib flags to be handled in
495 the standard Bacula way, which should fix bug #863 concerning
496 non-standard OpenSSL libraries.
498 kes Implement Help Browser window for bat.
499 kes Fix reload bug that reset StorageId to zero.
501 kes Fix TLS #ifdefing when TLS turned off.
502 kes Ensure that when labelling a tape with Slot=0 that InChanger
504 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
506 kes Add StartTime to final uar_sel_jobid_temp query so that we can
507 add DISTINCT (required by PostgreSQL).
508 kes Implement BSOCK authenticate_director() method. Eventually will
509 authenicate all daemons.
510 kes Move several more functions into the BSOCK class.
512 kes Add code to tell the OS that we no longer need a cached
513 file that we were reading. In findlib/bfile.c. Also,
514 only cache files that we are reading. Thanks to
515 Tobias Oetiker <tobi@oetiker.ch> for the idea.
516 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
517 kes Implement script to automatically generate cats and dll .def
519 kes Update README.mingw32 to include new .def file generation.
520 kes Correct typo in UTF-8 error message as reported by:
521 jhernandez <julianhernandez@gmail.com>
522 kes Add additional sm_check() code on debug level 1.
523 kes Set default debug level to 1.
524 kes Trap SIGABRT in attempt to get traceback.
526 kes Reduce bat connect timeout from 30 to 15 seconds.
527 kes More restructuring and implementing BSOCK class in place of
529 kes Remove a few unnecessary malloc() tests in crypto code.
530 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
531 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
532 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
534 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
536 kes Fix Verify InitCatalog. The attributes were not pointing to the
537 correct saved location.
538 kes Implement message callback so that GUI is sure to get all
539 daemon messages. Currently displayed in a dialog in bat.
540 kes Ignore SIGUSR2 (Bacula timer) in bat.
541 kes Apply regress patch from bug #859 to allow regress to work
542 with Solaris compiler.
544 kes Begin adding TLS support to bat.
545 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
546 clean up lex.c and make it more readable.
548 kes Move more bnet functions into the BSOCK class.
549 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
550 kes Complete change of berrno strerror() method to bstrerror()
554 kes Cleanup incorrect email addresses in bsmtp.
555 kes Make bat display initial messages rather than discard them.
557 kes First cut of adding .mod to the run command.
558 kes Implement auto display of messages in bat.
559 kes Enhanced preferences to allow all Bacula output to be
562 kes Try to make bsmtp date routines more generic.
563 kes Fixed bug #856 autochanger documentation.
564 kes Rework bsmtp date editing for Win32. This fixes bug #854.
565 kes Add new cats entry point so Win32 builds.
567 kes Attempt to fix bsmtp date editing on OSes without %z editing.
569 kes Do better checking for the MySQL 64 bit libraries looking for both
570 .a and .so libraries.
571 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
572 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
573 kes Require the thread safe version of MySQL during configure. Thanks
574 to Andre Noll for pointing this out.
575 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
576 continuing in migration code.
577 kes Apply implementation of tray-monitor font derived from gnome-console
578 submitted by Andreas Piesk <a.piesk@gmx.net>
580 kes Eliminate important memory loss in SQLite
581 kes Fixed the batch insert MySQL thread specific data that was not
582 being freed. See cats/mysql.c:db_thread_cleanup().
583 kes Fix restore before command.
584 kes Convert old hdr.name to name() in a few places.
585 kes Implement update jobid command.
586 kes Return all time_t dates in db_get_job_record()
587 kes Stop watchdog in SD earlier.
588 kes Put Pool just after Storage in please mount message.
589 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
592 kes Update the po files.
593 kes Fix Verify InitCatalog by making it cache attributes.
595 kes Change name bacula-bat to bat for man 1 page to correspond to
597 kes Check for client and store NULL pointers in status command. This
599 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
600 kes Fix sign extended editing of %p.
601 kes Clean out a little old #ifdefing in cats/mysql.c
603 kes If time diff between DIR and FD is more than 600 seconds convert
604 INFO message to WARNING.
605 kes Implement heap size display in status for all daemons.
606 kes Attempt to fix MySQL db open memory loss (not successfull).
607 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
608 kes Eliminate memory loss in MySQL (possibly other SQLs) during
609 Query. This looks like a MySQL but but by doing extra releases,
610 the memory goes away. This should fix bug #847.
612 kes When backup fails, cancel SD before waiting for sd termination.
613 kes If SD is waiting for FD to connect during cancel, wake up the
615 kes Fix fsf code so that errno is correctly reported.
616 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
618 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
619 so that Bacula doesn't later stumble into a seg fault.
620 kes Use the term Restore Client in the restore Job report.
621 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
622 the original job's FileSetId.
623 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
624 spooling in migration jobs. Not yet tested.
625 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
626 reading conf file from a pipe. However, do it with open_bpipe()
627 rather than popen. Not yet tested.
629 kes Fix an ugly bug where the VolCatBytes were getting updated
631 kes Implement bconsole memory command that prints current memory
632 usage, plus smartalloc dump.
633 kes Clarify some error messages in backup, admin, and migrate.
634 kes Shrink label dialog to smaller size.
635 kes Invert Cancel OK buttons on restore to be OK Cancel.
636 kes More strerror() to bstrerror() conversions.
638 kes Start implementing bstrerror() in place of strerror().
639 kes Stripping path -- seems to work.
641 kes Prevent door and port files from being restored (mostly
643 kes Free an unreleased buffer in compat code.
644 kes Change console Job name from *Console* to -Console- to eliminate
645 Win32 filename problems. Put Win32 path separator when creating
646 Console file. This fixes bug #846.
647 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
649 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
651 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
652 to force Win32 error message.
654 kes First cut strip path. The data should be passed to the FD,
655 but nothing is done with it yet.
656 kes Enhance the digest and signature routines in the crypto
657 library to accept a JCR and to use it to print error messages
658 so that they will go in the Job report rather than the daemon's
660 kes Simplify some of the verify signature code.
661 kes Simplify a few of the alternative returns in the signature
664 ebl Use only POSIX regex instead of GNU regex in breg.c for
665 File relocation. It fix broken freebsd compilation.
666 kes Convert all other Dir files to use new ua class message
668 kes Tentative fix for missing digest signature in bug 807.
669 kes Correct handle problem in new win32_ftruncate routine.
670 kes Convert ua_purge.c and ua_update.c to use new ua class
671 message routines for bat.
673 kes Correct incorrect installation of LICENSE in Win32 installer.
674 kes Display LICENSE at the beginning of the Win32 install.
675 kes Attempt to correct the need for the png files to be installed
677 kes Reapply my bat.conf install script in qt-console. I think I
678 editted bat.pro instead of bat.pro.in and it was lost.
679 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
680 the /var/lock/subsys for subsysdir. Also corrects typos in the
683 kes First cut update job.
684 kes Correct configure to include qmake of src/qt-console directory.
686 kes Make restore job yes/mod/no print in one command so GUI works.
687 kes First cut implementing backup and restore client.
688 kes Correct editing in Verify output that caused a seg fault.
690 kes Insure that bat.conf is not overwritten during installation.
691 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
692 while I was implementing migration in March 2006 !
694 ebl Cleanup file relocation, using char *RegexWhere instead of
695 char *where + bool where_use_regexp
696 kes Update some manpages and add bat manpage.
697 kes Make a first cut at converting bacula.spec.in for bwx-console
699 kes Apply patch from John Goerzen to add hostname as fourth argument
700 to make_catalog_backup script.
701 kes Fix typos I introduced into bsmtp.c
702 kes Make pm_strxxx() routines handle input of NULL pointer. This
703 is to protect from NULL pointers returned from SQL databases.
704 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
705 kes Add more debug to FIFO code -- fix fifo regression test.
707 kes Implement posix_fadvise in FD, and for reading spool files in SD.
708 kes Add thread timer to bnet_connect() to break from OS if wait time
711 kes Update Win32 build to include new files, new symbols, and
713 kes Implement socket level heartbeat (tcp_keepidle)
714 ebl Commit File relocation patch
715 kes Make bat have 'make install' target.
716 kes Warn during install if old gnome-console binary found.
717 kes Warn during install if old wx-console binary found.
718 kes Add -8 option to bsmtp command line to add content type utf-8.
719 Fixes bug #809. (Character coding problem in bsmtp).
720 kes If < is found in target (from, to, cc) then do not enclose the
721 target in < > in bsmtp. Fixes bug #772 (malformed address).
722 kes When printing certain items in dbcheck, stop after 300000.
723 Fixes bug #822. (dbcheck loops).
724 kes Incorrect status in Dir after waiting for mount with poll set.
727 kes Extend idea of Prefer Mounted Volumes to mean a volume about
729 kes Print waiting to reserve a device every 5 mins.
731 kes Don't call close_part in label.c if tape and relabel.
732 kes Don't free volume if busy in close() -- should help with
734 ebl Fix #824 RunScript bug (After script could be execute twice)
735 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
736 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
737 Add a regression script to test RunScript
739 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
742 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
743 deprecated. No additional bugs will be fixed, and they will be dropped
744 in a future release (probably 2.4.0).
745 kes Change name of wx-console to bwx-console to make it more Bacula
747 kes Change the name of gnome-console to bgnome-console to make it
750 kes Some time in March, a Feature Request with patch from Jorj Bauer
751 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
753 The ability for the director to validate a Client (FD) CN against
754 an arbitrary set of patterns rather than the hostname, with
755 A new 'TLS Allowed CN' set of directives which are implemented
756 in the Client resource. Then pattern matching is used in place
757 of hostname matching against the Certificate's CN. As an example, we
758 have certificates which (a) use a local CA, and (b) have a CN of the
760 kes Add new/changed entry points to Win32 build
761 kes Create unaccepted-projects for projects that are not accepted.
762 kes Simplify locking in the reservations system.
763 kes Add more debug code in reservations.
764 kes Make sure error condition on reserving a volume is handled correctly.
765 kes Correct handling of volume_in_use.
766 kes Correct handling of initializing a device.
767 kes Move handling of broadcasting releasing a device into release_device().
768 kes Correct attaching dcr to dev so that it is only done if device
769 is properly initiated.
771 kes Locking debug level tweaks in SD.
772 kes Tweak new Volume code.
774 kes Add exec external-command [wait-seconds] to bconsole. This
775 executes the external-command. Note! normally external-command
776 should be enclosed in double quotes.
777 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
778 it should normally be off in a production system.
780 kes Implement die command for SD so that we can force it to dump.
781 kes Implement SD lock debug code.
782 kes Implement new algorithm for keeping Volume list in SD. It
783 is now owned by the device.
785 kes Implement new code for freeing in use volumes that should
786 resolve if not all, some of the problems of multiple drive
787 tape conflicts described in bug 801.
789 kes Fix gui/bacula-web/images files in svn.
790 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
792 ebl Fix a bug in batch mode (in string escape)
793 kes Correct migration prune SQL typo that crept in in a
796 kes Move bnet_despool() into class in bsock.c
797 kes Modify job report to include director name and Build OS.
798 kes Move drop root privilege and check_catalog() before fork.
799 kes Add update database scripts (version 9 to 10) to updatedb directory.
801 ebl Check size and age of each file after its backup to see if
802 it has changed during backup, if 'checkfilechanges' is set.
803 The FD will do an extra check (stat(2)) after
804 each file backup. mtime, ctime and size are compared with
805 'before backup' information. If time or size mismatch, an
806 error message will be generated. You must upgrade FD to use it.
808 kes Make database name and user configurable
809 --with-db-name=xxx --with-db-user=xxx
810 kes Add back database type to message.c for debugging.
812 kes Implement dir_sql() which issues an SQL query.
813 kes Modify bat medialist to use dir_sql() and do some minor C++
814 formatting as well as eliminating a number of pointers, simplifing
817 kes Fix some of the mtx-changer grep commands for tape label readers.
818 kes Convert a number of bsendmsg into the appropriate send/warning/error
820 kes Suppress the using database message in the .sql command.
821 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
823 kes Add context menu for floating a window.
824 kes Some minor cleanup and name changes in qt-console
825 kes Add doing mt setblk 0 in Win32 mtx-changer.
826 kes Apply Martin's bug fix to move definition of ENODATA for
828 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
831 kes More pruning cleanup.
832 kes Turn on wait_for_drive by default in mtx-changer.
833 kes Turn on Batch insert code by default as it now passes regression.
834 kes Add ./configure --enable-bat to enable building of Bat.
835 No install yet though.
837 kes Implement a new .sql command for bat.
838 kes Implement code to turn off pruning in obtaining the next volume.
839 Pruning is turned off for the status dir command, but turned on
840 for SD requests and for the list nextvolume command.
842 kes Correct Qmsg() that was not updated correctly when committing a
843 previous change (probably the recent TLS patch).
845 kes Write new subroutine is_volume_purged() that explicitly checks
846 if the Volume is purged, and if so marks it as such. This should
847 resolve problems reported about needing to mount twice to recycle
849 kes Rewrite pruning algorithm to do more work in the SQL engine, and
850 to pass a list of JobIds to be deleted to SQL. Also, minimize the
851 amount of duplicated code.
852 kes Do volume pruning only for the Media Type desired (reduces pruning time
853 if multiple Media Types are in the same pool).
854 kes Implement more detailed info in the Job report for the Bacula version
856 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
858 ebl Add bbatch tool to bench database and insert mode.
859 Fix sql quote stuff in batch mode
860 Fix sql stuff for mysql
862 kes Correct problems with am/pm scheduling. Fixes bug #808.
863 kes Implement new prunning code that prunes up to 1000 jobs at
864 the same time. The same technique can be applied to a number
865 of other prune/purge subroutines.
866 kes Add an insanity check when starting a new tape job to ensure
867 that the tape position has not been changed. If so fail the
869 kes Fix Win32 build for dlls to add the folllowing:
870 src/lib/bsock.c -- new file with new entry points
871 src/lib/dlist.c -- new entry points
872 src/cats/sql_create.c -- new entry point
873 src/cats/sql_cmds.c -- new DATA item exported
875 ebl batch mode cleanup bscan-test is ok now.
876 kes Implement SD code to check length of disk volume before appending.
878 kes Correct return status on db_batch... routines.
879 kes Add call to db_write_batch_file_records() to migration code.
880 ebl Fix AfterJob timing
881 kes Move the checking of the database in initializion of the Director
882 to after we drop privileges. This avoids the need for both root
883 and bacula access to the DB.
884 kes Correct a misplaced variable definition in src/filed/backup.c
885 kes Correct how the new batch insert db_create_attributes_record()
886 uses the arguments. Caused a seg fault in bscan.
887 kes Implement lock() and unlock() methods in DEVICE class.
888 Implement block() and set_block(xx) methods in DEVICE class.
889 kes Modify bnet_connect() so that it uses time() to check for the
890 wait time expiring (on some OSes, some system calls may not
892 kes Modify Verify to obtain the previous JobId when it is actually
893 running rather than at schedule time (as it was in 1.38.x).
894 kes Fix src/job.c to handle MaxWaitTime correctly. This should
896 kes When checking pid in pid file, continue running if the pid is
897 the same as ours. This occurs on IRIX after a system crash.
900 kes Extend new GUI API.
901 kes Make the ua structure a class, and implement send_msg(),
902 error_msg(), warning_msg(), and info_msg().
904 kes Apply fix from for building wx-console on the Mac from
906 kes Implement new select mechanism for GUI programs.
907 kes Reorganize initialization of stackedWidgets in bat.
909 kes Add updated nagios plugin supplied by Christian Masopust.
911 kes More bat implementation.
912 kes File migrate bug with Pool Occupancy using mediaid instead
913 of jobids. Fixes bug #795.
914 kes Fix orphaned buffers in filed backup and verify due to
915 crypto buffers not freed during errors. Fixes bug #789.
916 kes Extend new GUI api code to tree commands.
917 kes Ensure that tree and dot commands check console ACLs.
918 kes Permit marking directory with trailing slash.
919 kes Allow 20 console connections (instead of only 10).
921 kes Add smartctl call to bacula-sd.conf as an example of getting
924 kes Modify jobq.c to let simultaneous restore jobs run. This may
925 cause them to fail if they cannot get a drive.
926 kes Add Client Connect Wait to Storage daemon to permit users to
927 modify the time the SD waits for a FD connection.
929 kes Correct virtual changer check which was backwards. This caused
930 volumes to be unloaded into slots already occupied.
932 kes Apply Command ACL filter to JobId list in restore command.
933 kes Correct typeo in var.c patch.
935 kes Don't let Bacula prune File or Job records for the current Job.
936 kes Fix variable substitution pad + inc bug reported (with patch)
939 kes Correct SQLite log table index as reported by Luca Berra.
941 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
943 kes Begin implementing new comm signals for API.
944 kes Fix a few places in lib/message.c where the open fd may
946 kes Continue implementing lib/bsock.c (real class). Make jcr,
947 who, host, and port private. There are new methods to access
948 them for non-class use. This required touching a number of files.
950 kes Add LANG=C to autoconf/randpass so it works with languages other
951 than English. Fixes bug #788.
953 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
955 You will not be able to generate Include/Exclude list any more.
956 It will be fixed soon.
957 If you want to use this, you can apply
958 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
960 kes Restore of sockets created false error messages because Bacula
961 no longer restores sockets, but the code was still trying to
962 set the attributes on a non-existent file. Reported by a user.
963 ebl finish RecyclePool feature
964 Media will takes Pool.RecyclePool
965 when moving from Scratch to a Pool or when user will do
966 update volume=xxx frompool
967 To use it, add RecyclePool = aPool to your Pool resource
970 RecyclePool = Scratch
974 kes Expand new BSOCK class adding signal() and new BNET signals.
975 kes Begin enhancing the dot commands adding a new API function
976 that returns more information and will make it easier
977 to interface to the Director from a program.
979 kes Make DEVICE fd private. Its new name is m_fd, and can be
980 obtained with dev->fd() outside the class. This is the
981 first of many DEVICE members to be made private.
982 kes Implement Michael Renner's idea on having a virtual disk
983 changer. I made some minor modifications (e.g. I did not
984 implement the Virtual Changer directive, but simply set
985 the Changer Command to an empty string.
987 kes Implement a BSOCK send() method that writes the whole record
988 in a single write() request rather than in two.
989 ebl add update volume=xxx recyclepool=yyyy
990 volume takes recyclepool from pool when using update volume=xxx from pool
992 kes Fix encryption deblocking bug, which caused some restored files
993 to be truncated. This fixes bug #763.
994 kes Add FD event sequence order prepared by Eric -- for RunScripts.
995 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
997 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
998 ebl Use btime_t instead of uint64_t in media patch.
1000 kes Optimize the use of the database a bit in the Status dir command.
1001 Only open it when needed, ensure that if any previous database
1002 was opened, it is closed.
1004 kes Correct VolCatBytes bug from media patch.
1005 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1006 in the case of orphaned records.
1007 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1008 and File records in 300K chunks to be more efficient. This
1009 idea came from Juan Luis Frances (if I remember right).
1010 kes Apply Eric's scratch patch that moves a purged Volume to
1011 the RecyclePool. Question: how is RecyclePool set? what
1012 happens to the ScratchPool?
1013 kes Apply Eric's media patch that collects read/write media
1014 times as well as byte counts. This patch requires a
1015 simultaneous upgrade of the DIR and SD. Note, there
1016 should be some way to turn off timing. I'm not sure
1017 times are in Bacula units.
1018 kes Apply Eric's batch-insert patch.
1020 kes Update projects list.
1022 kes Implement Include/Exclude file lists in FD as dlists using
1023 the new dlistString class. This permits efficiently having
1024 large include/exclude lists and completes project Item 25.
1025 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1026 console is authorized to cancel the job. This fixes bug
1028 kes Modify SD so that the VolCatJobs medium record is updated
1029 at the beginning of a Job rather than the end. This
1030 fixes bug #775 where exceeding MaxVolJobs caused jobs
1032 kes Added a mutex around getting and setting Volume information
1033 so that multiple simultaneous jobs will single thread.
1035 Switch to using Subversion
1036 kes Remove src/pygtk-console/ from configure
1038 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1039 plus the entrypoints.
1040 kes Apply patch supplied that corrects debug print
1041 in canceling jobs for max run time. Supplied as
1042 part of bug #621, which was previously fixed.
1044 kes Test on job_canceled() and sd_msg_thread_done inside
1045 loop starting the message thread to avoid a race condition.
1047 kes Remove rl_catch_signal from console.c as it conflicted
1048 with the header definition. Fixes bug #765.
1049 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1051 kes Clarify some stored/acquire messages to indicate if the
1052 problem is with read or append.
1054 kes Fix memory leak with storage ids in cats/sql_get.c
1055 kes Terminate watchdog earlier to avoid reference to released
1056 memory -- reported by Jason Austin.
1057 kes Move closing the database from jobq.c to the director daemon
1058 termination routine. This fixes memory leaks for shadow jobs
1059 (i.e. migration jobs).
1060 kes Free up the unique jobid chain items in migrate.c. This fixes
1061 a memory leak problem.
1062 kes Convert some ugly looking for statements to use foreach_alist
1063 in findlib/find.c. This will facilitate converting the structures
1064 to use dlist (for large include/exclude lists).
1065 kes Fix a bug in the btree.c and btree.h routines, then rename them
1066 rblist and add them to be built in src/lib. Include some new
1067 methods written by Rudolf Cejka that make the code more readable
1068 (hides some of the ugly casting).
1069 kes Add set_next() and set_prev() methods which make the code much more
1070 readable. Also add a new dlistString class that facilitates storing
1071 strings in dlists. To be used in the large include/exclude lists.
1072 kes Make some trivial modifications to lib/tree.h that use rblist
1073 rather than dlist for storing the tree links. This was suggested
1074 by Rudolf Cejka. The result of this is that the restore tree now
1075 uses red-black binary trees rather than simple linked lists. This
1076 should give rather dramatic speed improvements for directories
1077 contining large numbers of directories/files (more than 10000).
1079 kes Fix maxruntime bug #621.
1081 ebl Implement the include JobID in spool file name project.
1082 kes Reorder projects file in order determined by Jan 2007 vote.
1083 kes Implement item #12 on project list -- quick release of FD by
1085 kes Fix open of SQLite3 db where user does not have write permission
1086 so that DIR does not crash. Fixes bug #761.
1088 kes Add back missing @ in Win32 Makefile.
1089 kes Change 'Device not configured to autolabel' from INFO
1091 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1092 which should restart an indefinite # of times.
1093 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1094 other DIR specifications.
1096 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1097 Fix path quoting in SQLite scripts.
1098 Fix problems with SHGetFolderPath.
1100 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1102 kes Fix Job restart on error bug that promotes an Inc to a Full
1103 backup. This should fix bug #755.
1104 kes Add qt-console and first cut of code.
1108 kes Fix Bacula->Documentation link on Win32 to point to index.html
1109 instead of bacula.html. Fixed bug #750.
1110 kes Return JobId in db_get_job_record() when JobId==0. This should
1112 kes Do not release source pointers when restarting a failed job.
1114 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1115 This *should* fix bug #747.
1116 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1119 kes Modify USTORE constructor to set an empty store_source string,
1120 and don't copy the store_source string in a cancel. Hopefully
1121 this will fix Arno's seg fault, bug #744.
1122 kes Add back code to disable conio in configure. Fixes bug #743.
1123 kes Correct the Options scanner in the FD to correctly handle
1124 SHA1 option, which was eating the next option. Reported by
1126 kes Add code to indicate when the SD is spooling, spool wait, and
1127 despooling as requested by Alan Brown.
1129 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob