1 Technical notes on version 2.2
5 kes Fix seg fault terminating bat.
7 Beta Release Version 2.2.10-b1
9 kes Permit multiple simultaneous restores -- experiment.
11 kes Backport development stream SD reservation system changes.
15 kes Move final volume swapping code to DCR method and
16 call it from acquire_for_read().
17 kes When wrong volume is mounted during read, unload_autochanger.
19 kes Stop searching for Volumes in SD askdir if DIR returns the
20 same volume name twice in a row.
22 kes Tweak the swap Volume from one drive to another code so that
24 kes Resolve several problems with recycling that broke the new
25 code (these problems are in 2.2.9 as well).
26 kes Remove the volume lock when calling the sysop code.
27 kes Don't mark a reserved volume with no writers as unused otherwise
30 kes Rework class structures for VOLRES, DCR, and DEVICE to make
31 the method names a bit more logical, and for more logically
32 handling the responsibilities.
34 kes Remove redundant code in terminating the scheduler that just
35 causes a seg fault in many cases.
36 kes Cleanup releasing a volume and make it a DCR method.
37 kes Improve algorithm for detecting pre-reserved volume and
40 kes Tweak volume swapping code so it works.
41 kes Correct name overloading in mount.c
42 kes Replace released flag in VOLRES with reserved and add access
43 methods for the VOLRES class.
44 kes Prevent volume from being released while being swapped.
45 kes Refactor parts of stored/mount.c
47 ebl Add sanity checks for VolWriteTime and VolReadTime
48 ebl Take care of bad clock changes while computing VolWriteTime
49 and VolReadTime. This should fix or limit #1066
50 kes Correct error string numbers in dird/catreq.c
51 kes Restructure reserving, acquiring, and mounting volumes. Calls to
52 autochanger are deferred for mount.c -- simplifes the code.
54 kes Do not prune any running job. It just fails the job.
55 kes Lock the volumes when changing dev->reserved_device and marking
56 the volume unused otherwise the device can get reserved by
57 another job before the volume is released, thus blocking it.
60 Beta Release Version 2.2.9-b7
62 kes Close bat console windows first to eliminate error message
64 kes Remove useless code in Scheduler that causes seg fault on
66 kes Correct some SD catalog request error messages.
67 kes Don't allow pruning of any running job.
68 kes Turn off code in read_record that causes a seg fault in the SD
69 when reading past an EOS_LABEL.
70 kes Turn off unloading the autochanger in reserve.c as it just
72 kes Lock volumes when unreserving a device.
73 kes Do not mark volume unused when recycling.
74 kes When acquiring, don't mark volume unused if it is reserved (busy).
76 Beta Release Version 2.2.9-b6
78 kes Eliminate ./configure warning on po directory
79 kes Fix bug #1063, reuse of freed ptr in list nextvol.
80 kes Release regex compile buffer in filed/job.c
81 kes Add proper type of const char in sql_create.c
82 kes Turn off debug in daemon termination routines
83 kes Move free_volume_list() before devices are freed in stored.c
84 kes Fix reference to uninitalized stack variables in bregex.c.
85 This should correct bug #1067.
87 kes Fix possible seg fault in SD when freeing a volume entry.
89 kes Apply patch from bug #1069 that corrects spurious error messages
90 when ACLs enabled on SGI but no ACL exists.
91 ebl Fix a storage deamon segfault at debug level 500.
93 Beta Release Version 2.2.9-b5 -- not released
95 Beta Release Version 2.2.9-b4
97 kes Re-enable code to remember last volume mounted on a non-tape
99 kes Add patch supplied in bug #1068 that fixes a SD crash when using
100 a Virtual autochanger.
101 kes Generate correct JobMedia records during spooling/despooling when
102 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
103 <tih@hamartun.priv.no> for excellent analysis and testing.
105 Beta release Version 2.2.9-b3
107 kes Rework certain SD locking based on gdb tracebacks of deadlocks
108 sent by Eric. This code now uses only the volume_lock() rather
109 than the reservations lock when at EOM and acquiring a new
111 kes Ensure only one exit point in several subroutines.
113 Beta release version 2.2.9-b2
115 kes Fix to initial tape drive open to release the volume name
117 Beta release Version 2.2.9-b1
119 kes Fix to JobMedia fix.
120 kes Fix bug pointed out by Peter Much that causes the StorageId to
121 be updated when reading a tape (during migration, it could have
122 been incorrectly set to the write StorageId).
124 kes Implement autostart scripts for Debian
126 kes Fix mtx-changer.in for broken Debian mt program.
128 kes Massive commit of all fixes and back ports to create 2.2.9
130 kes Apply doc fix from bug #1062.
131 kes Resolve crash and improper restore wx-console Win32 restore
132 GUI. Fixes bug #1065.
133 kes Update Win32 wxWidgets to latest version.
134 kes Attempt to do correct handling of Win32 mount points. Should
136 kes Fix Win32 FD backup/restore memory leak due to improper termination
137 of BackupRead/Write. This fixes bug# 1038.
138 kes Add const to AIX prototype for initgroups()
140 kes Undo bug #1047 heap overrun fix as it is not correct.
142 kes Fix creating first JobMedia record during Migration to include
143 proper index. This caused slow restores of migrated jobs.
145 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
146 and do not strip paths on symbolic links.
147 kes Set catalog backup database and user name from values specified on
148 the ./configure line.
149 ebl Apply patch to correct bug #1031, about wrong pool source information
152 Release Version 2.2.8
154 kes Apply patch from Martin to correct bug #1040, bscan sets existing
156 kes Fixed important spelling error in doc -- bug #1045.
158 kes Move initialization of read/write res lock earlier in the code.
159 This fixes the crash with a null conf file. This fixes bug
161 kes Redefine CURES in lib/parse_conf to be URES and move it all
162 into lib/parse_conf.c -- this responds to bug #1042, but does
163 not fix it. The fix is not to compile with FORTIFY_SOURCE.
164 kes Backport fix de-referencing a NULL pointer in the scanner from
165 the trunk SVN. I don't think this was reported as a bug.
167 Beta release Version 2.2.8
169 kes Re-enable the new job code editing (%f).
171 kes Fix bsnprintf for float point numbers. I broke recently when
172 parameterizing some variables. This fixes bug #1036.
174 kes Move Heartbeat documentation from Job to Director resource.
175 This fixes bug #1033.
177 kes Fix existing switch drive SD code to call autochanger to release
178 any old volume. This must be done to keep the autochanger from
179 releasing subsequently newly reserved volumes in doing a close().
180 This should possibly fix bugs #1032 and #1018.
181 kes Apply big backport of current SVN SD code that corrects a number
182 of race conditions. This is a first step in fixing bug #1018.
184 ebl Fixes bug #1028 where "Selection Type" option was not usable
188 Release Version 2.2.7
190 kes Partial back out (disabled) %f job code editing because it
191 does not build on Win32.
192 kes Fix seg fault Frank Sweetser reports in regression testing
193 on his systems. The problem was that the original author of
194 bsnprintf.c did not take into account the side effects of
195 using ++x in the argument to a #define.
197 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
198 that implements double quoting include names in conf files,
199 and also allows piping input by having the first character
200 be a vertical bar (|).
201 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
202 that implement %f in RunScripts to pass the FileSet name.
203 kes Skip leading | when lex input comes from a pipe as suggested
204 by Michael Stapelberg <michael@stapelberg.de>.
206 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
207 Nerijus Baliunas <nerijus@users.sourceforge.net>
209 kes This patch corrects a problem where the maximum concurrent storage
210 jobs counter gets out of sync during restore jobs causing jobs to
211 'wait on max Storage jobs'. This patch fixes bug #1009.
213 kes Add new include to postgresql.c suggested by Marc Cousins so
214 that it compiles correctly with pgre version 8.3. Also fix
215 misuse of %x with pointer (should be %p).
217 kes This patch fixes bcopy so that it produces correct Volumes.
219 kes This patch eliminates spurious output to the console during a VerifyVolume
220 job that contains encrypted data. It fixes bug #1024.
222 kes This patch prevents the 'status dir' command from trying to use a scratch
223 volume and possibly moving it from one pool to another. This patch fixes
226 kes Fix --archivedir addition to configure. Replace it with
227 --with-archivedir in configure.in This fixes the regression
229 kes This patch fixes bug #1012 where the job is canceled because
230 of Max Run Time exceeded when the job has not yet started.
232 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
233 one 'part' to write. Instead of each part being stored on disk,
234 written to DVD, then deleted from disk, all parts are written to disk,
235 and only the last is written and deleted from disk.
237 kes Correct typos in disk-changer.in
239 kes This patch fixes the status command to include the formating string for
240 JS_AttrInserting. It fixes bug #1021.
241 kes This patch should fix the Mac OS X build problem on the latest
242 Darwin, where sys/types.h was not included correctly (apparently
243 due to a change in the Mac headers). The solution was to explicitly
244 ensure that it is defined for the ./configure.
245 This patch also has a rebuild of configure that includes the Debian
246 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
247 kes This patch should ensure that queued messages to the console are
248 displayed as soon as possible. It should fix bug #1007, but has been
249 reported not to work.
251 kes This patch fixes the infinite loop when trying to increase the
252 maximum number of volumes in a Pool during the add command.
253 This patch fixes bug #1008.
255 Release Version 2.2.6
257 kes Get fix for joblist bug in bat from trunk.
259 kes This patch fixes bug #1003 where putting the message output from
260 a Verify job into the catalog results in a recursive loop. The problem
261 seems to show up only with postgresql (to be verified).
263 kes Fix bug #942 where lots of emails where generated when the heartbeat
264 interval was low and Bacula wanted a different tape from the one in
267 ebl Apply 2.2.5-lastwritten.patch to fix the LastWritten field
268 which was updated during a restore (or a reading migration) bug #982
270 ebl Use qmake-qt4 instead of qmake when available (debian system).
272 kes Add a security warning to src/cats/make_catalog_backup.in indicating
273 that passing the password via the command line (arg 3) is insecure.
274 This responds to bug #990 (it doesn't fix it).
275 kes Apply 2.2.5-postgresql-errors.patch
276 kes Remove unneeded File table index on JobId, which is already
277 present as the first index of another multi-index.
279 kes Set default debug_level to zero. This corrects bugs #991 and #993.
280 kes Fix a crash in bat when it cannot connect to the Director for example
281 if the Director is not running.
283 kes Activate Close button on tray-monitor window. This fixes
286 kes Fix spurious warning message printed when creating a volume with
287 a LabelFormat. This fixes bug #976.
289 Release Version 2.2.5
291 kes Add JobId in place of Job name in all the Jmsg() output.
292 kes Correct the APP_DESC for the Win32 storage service (remove an e).
294 kes Add new SD despooling attributes and Dir inserting attributes
295 job status codes. This fixes bug #961.
296 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
298 kes Fix doc issue. This fixes bug #963.
299 kes Fix listing performance problems in bat. Pointed out by
301 ebl Fix replace on restore. This fixes bug #969
302 kes Fix bat code that tests for Win32. This should fix bug #968
303 kes Query 5 list wrong Vol after migration. This fixes bug #960
305 kes Correct lib/Makefile.in to include enh_fnmatch.o that was removed
306 in back porting from 2.3.x
308 kes Backport almost 4000 lines of 2.3 code that fixes a number of bugs.
309 The details are included in the notes in this file.
311 kes Backport 2.3 code that fixes: it fixes incorrect or incomplete error
312 messages; it fixes a problem opening the SQLite3 database when multiple
313 simultaneous jobs were running; it fixes a bug with certain versions of
314 MySQL where batch inserts failed because of table name character case
315 (upper/lower) differences.
316 kes Fix race condition that drops final block written to volume.
317 This happens in rare cases with multiple simultaneous jobs
318 when the Volume fills. This fixes bug #964. May be related
319 to bug #935 and possibly #903.
321 kes Fix FD->SD authorization failure, which was due to spurious
322 wakeups from a pthread_cond_timedwait(). Simply check the
323 predicate before continuing. This fixes bug #953
324 dvl Add new configuration item --archivedir
325 dvl Adjust regression tests to use tmp not /tmp. This will allow
326 multiple concurrent runs of the regression tests.
328 kes Eliminate more strerror() and replace with bstrerror().
329 kes Remove BSD getopt and replace with unrestricted IBM version.
330 kes Fix Win32 build for changed calling sequences.
332 kes Fix FD->SD authorization failure, which was due to spurious
333 wakeups from a pthread_cond_timedwait(). Simply check the
334 predicate before continuing. This fixes bug #953.
335 kes Add const char where needed (more to do).
337 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
338 kes Don't overwrite error message in check_tables_version.
340 kes Unlock batch insert tables with same calls used elsewhere.
341 kes Allow starting 59 jobs a second.
342 kes Make SD session key more random.
343 kes Add retry for SQLite opening db if it fails. Probably helps
345 kes Suppress extra error messages during batch insert failure.
347 kes Put some FD auth code on dbglvl rather than fixed.
348 kes Return insert attributes error message in db msg buffer to avoid
349 false error messages. Helps fix bug #966.
350 kes Separate batch init error messages. Probably helps fix bug #966.
351 kes If Dir gets an error during inserting attributes, cancel SD.
352 This reduces unnecessary error messages.
354 ebl Cleanup batch insert code. Probably fixes bug #965.
356 kes Turn off some code when batch insert not enabled.
357 kes Edit FD name in connect error messages.
359 kes Add code to handle tray monitor separated from Win32 FD.
360 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
362 kes Fix ANSI tape labeling. This fixes bug #954.
363 kes Increase the max block size to 4MB fixes bug #957.
364 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
365 is not properly mounted (recognized) during a poll.
366 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
367 Job that has differences reports Verify OK.
368 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
370 Release Version 2.2.4
372 kes Increase size of name string when FD making connection to SD.
375 kes Add waits to multiple exit detection code to try to force pid
376 file to always be deleted.
377 kes Restore good dev.tar.gz to rescue set appropriate binary property.
379 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
380 trying to switch drives by checking for blocking before unblocking.
382 kes Cancel storage daemon in all cases where FD reports error. This
383 should fix virtually all cases of bug #920.
385 kes Fix error message that was clobbered when Dir tells SD it does not
386 have write permission on Volume. This should fix a minor point
387 in bug #942, but not the main problem.
388 kes Add code to cancel job in SD if FD connection fails. This should
390 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
391 kes Fix migration code to get correct Volume name with multiple volumes
392 by skipping |. Fixes bug #936.
393 kes Implement patch supplied by Landon to fix bug #944 where using
394 TLS with bconsole uses 99+% of the CPU.
395 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
397 kes Move patches into patches directory.
399 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
402 ebl Using 'm' in bconsole will show messages like before,
403 and not memory usage.
405 Release Version 2.2.3
406 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
409 kes Fix bug #935, and probably also bug #903 where files were not
410 restored. MediaId was not properly set in JobMedia record after
413 kes Add ./configure search in qwt-qt4 for qwt package
414 kes Apply Martin Simmons patch that should turn off the new API usage
415 when batch insert is turned off allowing building on older
418 Release Version 2.2.2
420 ebl Detect if new PosgreSQL batch insert API is present.
421 kes Correct incorrect mempool call causing Director crash.
422 sb Update spec files for 2.2.1 release
424 Release Version 2.2.1
426 kes Update POTFILES.in
427 kes Cleanup a few underquoted AC_DEFUNs in configure
428 kes Apply patch from Martin Simmons that adds a test for va_copy to
431 kes Fix bug #921 by increasing the number of tries to create a new volume
433 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
434 can be called multiple times. Implement a version for machines
435 without va_copy() that gets a big buffer.
437 kes Integrate more portable zone offset code into bsmtp.c
438 Submitted by Attila Fülöp.
440 kes Fix bad SD->FD return status reported by
441 (James Harper) <james.harper@bendigoit.com.au>
442 ebl Fix a bug in read_close_session which return random status
443 thanks to James Harper
445 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
446 and directory names during restore of single file/directories.
447 kes Add sanity checks to .sql command when string is empty. Hopefully
448 that will resolve Dirks Director crash.
450 kes Apply patch submitted by Martin Simmons that corrects a seg fault
451 in the bsmtp chat subroutine when debug is >= 10.
453 kes Fix Director crash when running bat SQL queries.
454 kes Add David's notes on Item 8: Copy pools.
456 kes Rework projects file to be current and ready for a vote.
457 kes Enhance lex scanner error message.
459 kes Tweak LICENSE file to mention BSD code.
460 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
461 if specified on the ./configure.
462 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
463 This class is intended to allow us to open a second bsock to the
464 Director while in the restore subdialog.
466 kes Fix configure to create bat Makefile before creating dependencies.
467 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
468 kes Add a tooltip to the tray monitor.
469 dvl Set the Director's PID file before dropping privs. This fixes
472 kes Update AUTHORs file
473 kes Increase the default max concurrent jobs to 20 in FD and SD to
474 correspond with the default .conf files.
475 kes Rewrite the Win32 service routines. This eliminates the 3 copies
476 some different, of the same file created by RN when porting the
478 kes Rearrange some of the Win32 directories and the placement of the files
480 kes Set DEVELOPER flag in version.h
482 ========================================================================
483 Release Version 2.2.0
485 kes Apply a second doc patch from Marc.
486 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
487 improves the tips section that discusses how to setup multiple
490 kes Update bat README file.
491 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
492 corrects a typo in the Recycle status check in db_find_next_volume().
493 This will probably fix a number of annoying problems with multiple
495 kes Modify most of dird/msgchan.c to use bsock class calls rather than
496 bnet calls -- no functionality change.
498 kes Modify the Verify output to specify if files are missing on
499 the Volume(s) or disk. Fixes confusion in bug #916.
500 kes When more than one Volume is read in a migration job, the last
501 Volume bytes reported are from the last read volume rather than
502 the last written volume. Fixed. This fixes bug #910.
503 kes Fix display of Recycle flag after update volume=foo recycle=yes.
504 It previously printed New Recyle flag is: no. This fixes bug
507 kes Correct seg fault when switching tape drives during restore.
508 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
509 be used until after 2.2.0 release.
511 kes Remove fnmatch() in SD that permitted wild card specifications.
514 kes Fix %g in filename returned by SQL for browse tree reported by
516 kes Fix configure so that it puts config.out in the cwd rather than
518 kes Attempt to fix the locking problem reported by Eric in bug #906.
519 kes Make berrno class to leave errno unchanged after constructor call.
520 kes Make bnet_server use the heap rather than the stack to allocate
521 its socket fd pointers to avoid a crash at termination. Problem
522 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
524 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
525 and putting it in depkgs-qt along with Qt4.3.
527 kes Rework code in acquire.c that switches drives for reading when
528 the Media Type does not match. This should fix bug #906
530 ebl Fix a director segfault during job setup #907
531 kes Correct seg fault in postgresql when first operation returns no
532 rows. Fixes Dirks File browser problem seg fault with bat.
534 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
535 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
538 kes Implement PopUp YES/NO dialog for bat.
540 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
542 kes Correct RunScript to terminate job in FD on failure.
543 kes Change abort_on_error and AbortJobOnError to fail_on_error
544 and FailJobOnError in RunScripts.
545 kes Minor tweaks of code formating in RunScripts, principally to
546 avoid depassing 80 columns.
548 kes Eliminate one #ifdef Win32 in bsmtp
549 kes Implement grow tool to grow a file for testing very large databases.
550 kes Add big-vol-test to test Bacula seeking with > 5GB.
553 kes Modify find_next_volume() to return all values in Media record.
554 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
558 kes Update Release notes
560 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
561 Warning, in previous beta version, all media get from scratch keep their
564 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
565 This should fix bug #842. Made a note to look at removing the temp
566 files at the end of the install.
567 kes Add ability to mount and unmount a file device providing it is
568 marked as being removable and has the appropriate mount and unmount
569 commands defined in the Device resource. This fixes bug #830.
570 kes When applying a storage override, release all previous storage
571 definitions rather than just prepending the new storage.
572 This should prevent a good deal of confusion.
574 kes Implement ./configure search for qwt libraries.
576 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
577 Win32 FD. This should fix bug #893.
578 kes Remove an unnecessary beep in Win32 init code.
579 kes Update copyright dates in Win32 executable about boxes.
580 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
581 code with a BSD getopt.c and getopt.h.
582 kes Remove sched.h from the Win32 compat directory -- not used.
583 kes Remove the Exit menu item from the Win32 tray monitor. If you really
584 need to shut it down, do it through the services panel or the command
586 kes Remove some inappropriate Bacula FSFE copyrights.
587 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
588 kes Fix regress config non-portable test as pointed out by
589 Florian Heigl <florian.heigl@gmail.com>
590 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
591 as pointed out by Florian Heigl <florian.heigl@gmail.com>
593 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
594 Reported by Frank Sweetser.
598 kes Fix client-only build.
599 kes Integrate client-only fixes for bsys (initgroups) and conio from
600 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
601 kes Make arguments to get_scratch_volume() in same order as other
603 kes Rework the prune_volumes() subroutine so that after purging and
604 no volume found in desired pool, it will check for a scratch
605 volume. This prevents recycling the whole scratch pool.
606 kes Add code to status storage to print boffset_t (largefile support).
608 kes Move qwt (Graphics libarary for Qt4) to depkgs.
609 kes You now need a --with-qwt=<dir> to be able to build bat.
610 kes Update src/win32/cats/bacula_cats.def to include the new
611 db_get_query_dbids() call on Win32.
613 kes Correct a problem when selecting a scratch volume and moving
614 it to another pool that lost some columns.
615 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
616 kes Enhance Autochanger error messages to include Volume and device name.
617 kes Rework prune_volumes() code to take account of InChanger flag,
618 and to handle recycling volumes going to the Scratch pool and
619 current pool because the RecyclePool directive.
620 kes Implement a better and more efficient db_get_query_dbids() to
621 handle creating and passing back a list of DBIds.
625 kes Start work on new more efficient DBId subroutine. First use
626 will be for recycling volume to Scratch inchanger.
627 kes Increase number of JobIds in pruning from 1000 to 10000.
628 This to be replaced by above routine.
629 kes Begin implementation of building Qt4 on Win32.
630 kes Correct typo in fix I added for bad TLS shutdown.
631 kes Pull 2.0.3 patches into patches directory.
632 kes Update Release notes. Include qt-console in line count.
633 kes Update Projects file.
635 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
636 bug in migration code where a job that spanned two volumes
639 kes Implement new BST_DESPOOLING blocked state. Change from locking
640 during despooling in SD to blocking. This means that other threads
641 can work with the device structure, in particular the reservations
642 system while despooling.
644 kes Fix return in reservation message queue that missed clearing
645 the jcr lock (implemented 26Jun07 below).
646 kes Rename a number of dev methods to make locking function names
648 kes Document locking in lock.c. Move lock structures to new file
651 kes Move reservations message lock to lock jcr only this
653 kes Move main SD locking code into lock.c (new file).
654 kes Update Win32 build to include lock.c
658 kes Dirk committed the qwt library code for drawing graphs in bat.
659 kes Tweak install of qwt so that it is integrated with ./configure.
661 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
662 out by Eric (my typo).
663 ebl Fix configure.in to get batch mode enable
664 kes Return correct string from authenticate.cpp in bat when connecting
666 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
667 spurious line drops when using TLS.
668 kes Do not file reparse points when restoring a file that already
671 kes Implement Windows reparse points -- similar to directories, but
672 we do not descend into it. This is a first cut. They seem to
673 be backed up, but restore is not yet tested.
674 kes Remove restore_blocking in tls code when shutting a socket to leave
675 it in blocking mode. Hopefully this will fix the encryption bug
676 reported by Frank Sweetser.
677 kes When opening a file for backup, tell the OS that we are going to
678 read it sequentially -- optimization.
679 kes Change variable names in authenticate_director() to not conflict
680 with member names in bat. Caused great confusion with compiler,
683 kes Queue openssl error messages in case of comm problem.
684 kes Do shutdown() call if socket terminated.
685 kes Remove some duplicated code in tls.c
686 kes Move more of the bsock member variables into private and access
688 kes Add Frank Sweetser's tls-test to the regression suite.
690 kes Add Swedish sv.po file
692 kes Don't print clock skew message in FD if less than 3 seconds diff.
693 kes Add a bit of VSS info to status client.
694 kes Implement a first cut of Vista VSS, using Win2003 code.
698 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
699 loaded tape but uses first drive).
700 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
701 This was indeed a Win32 issue.
703 kes Simplify search of autochanger for in-use Volume.
704 kes Fix exit condition of check for in-use volume. kes Remove
705 inappropriate my_postgresql_free_result() in db_close()
707 kes Fix bad return in FD when encryption signature not found.
708 Probably caused a crash.
709 kes Inhibit missing encryption signature error messages for
710 file types where no signature computed.
711 kes Correct inverted check on autochanger in reservation system.
712 kes Tweak debug code in autochanger reservation.
714 kes Add some additional locking in the cats directory in subroutines
715 that modify packet variables called from batch insert.
716 kes Rework how dcrs are allocated. new_dcr() can now be called
717 with an existing pointer, and it will simply clean it up.
718 This allows the reservation system to test various different
719 devices, and will permit easy device changes.
720 kes A bunch of changes all over to handle new new_dcr() calling
722 kes Work more on the Volume management in the SD. Remember Volumes
723 for tape drives and for autochangers (even virtual disk changers).
724 kes When looking at the Volume list to reserve a drive, handle
725 autochanger names correctly by interating through the changer
726 devices. Also call the Director to see if a Volume is suitable
728 kes Fix some bugs in bscan. Make sure all media records are written.
729 Make sure that valid JobMedia records are written for disk files.
730 Previously they were completely wrong.
731 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
732 that the URLs don't change and so that the developers will all
733 work off the same copy. Rebuild from scrach.
734 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
738 kes Fix seg fault in FD from incorrect digest size.
739 kes Fix argument to non-OpenSSL crypto.c subroutine.
743 kes Remove a few malloc()s from the encryption code.
744 kes Use the class calls to bsock in filed/backup.c and restore.c in
745 place of the old bnet_xxx code.
746 kes Implement code that does an on the fly calculation of the
747 signing digest during restore of encrypted files. It makes
748 a best guess at the algorithm, and if it is not correct, will
749 then revert to the old code which reads the file after it is
751 kes Implement at least one missing crypto stream in stream_to_ascii()
752 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
753 #877 where a reload with bad syntax causes Dir to exit.
755 Cut: 2.1.14 beta (not released)
757 kes Do not free a volume on a tape drive until another volume is
758 mounted and read, or the autochanger unloads the volume.
759 This should help the SD re-use volumes that are already mounted,
760 and should fix bug #886.
761 kes Apply patch from user brettedgar that allows gnome2-console include
762 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
763 kes Apply patch from Lucien Weller that fixes day of week calculation
764 because of DST flag problem. Fixes bug #887.
766 kes Move find_next_appendable_volume() to after acquiring a valid device
767 in reserve.c. This fixes bug #864 -- confirmed by reporter.
769 kes Unable to reproduce bug 872. However added additional testing for
771 kes Bug #874 resolved by documenting SQLite limitations.
772 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
773 kes Bug #881 resolved by removing typo in mtx-changer script.
774 kes Made Frank Sweetser's wiki the official Bacula wiki with his
775 approval. Added a link to the wiki on the web page, and implemented
776 a backup from http://paramount.ind.wpi.edu
778 kes Fix update allfrompool to pass pool name.
780 kes Convert to pure GPL v2 license.
781 kes Fix sscanf problems reported by Peter Buschman that caused
782 a bus error on Solaris.
783 kes Rework (simplify) the select prompt in bat.
784 kes Move get_jobid_from_tid() into lib and create a
786 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
787 should definitely fix the problem of lost error messages in the
789 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
790 kes Eliminate tcpd.h from the project. Enclose the #include from the
791 library with extern C ...
792 kes Add print of signal name when a signal is trapped.
796 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
798 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
799 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
800 makes SQLit3 run 30 times faster, though a bit less safe.
801 kes Implement --with-batch-insert in configure and detection of thread
802 safe libraries. It is on by default, but turned off if no thread
803 safe library (e.g. SQLite 2) is available.
805 kes Fix Bacula PostgreSQL buffer overruns.
806 kes Do better checking for NULL results returned from PostgreSQL;
807 implement retry for failed queries; clear results buffer after
808 failed query. Hopefully this will correct the PostgreSQL failures.
810 kes Implement algorithm to handle only one appendable volume with
811 Prefer Mounted Volumes = no.
812 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
813 returned from a query.
814 kes Make volume lock recursive.
815 kes Implement an additional volume reservation algorithm that
816 starts by considering all reserved volumes then uses the
817 old brute force algorithm of searching the resources to
818 find a suitable device.
819 kes Add new reservations debug code and refine the old code.
820 kes Update the win32/dll/bacula.defs file.
822 kes Tweak reservations algorithm to permit a few more cases, i.e.
823 volume reserved, but on different drive, ...
824 kes Enhance SD status to include Pool and Media Type for drive in a
825 more readable format (a bit longer).
826 kes Fix PostgreSQL double free.
828 kes Minor refactoring of restore decryption code.
829 kes Add code to smartall.c to detect double free of a buffer.
831 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
832 so that bsmtp will create a correct email address (mailbox only).
833 kes Modify 'memory' command so that the buffers are listed as 'In use'
834 to avoid confusion with Orphaned buffers.
835 kes I reworked the OpenSSL include/lib flags to be handled in
836 the standard Bacula way, which should fix bug #863 concerning
837 non-standard OpenSSL libraries.
839 kes Implement Help Browser window for bat.
840 kes Fix reload bug that reset StorageId to zero.
842 kes Fix TLS #ifdefing when TLS turned off.
843 kes Ensure that when labelling a tape with Slot=0 that InChanger
845 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
847 kes Add StartTime to final uar_sel_jobid_temp query so that we can
848 add DISTINCT (required by PostgreSQL).
849 kes Implement BSOCK authenticate_director() method. Eventually will
850 authenicate all daemons.
851 kes Move several more functions into the BSOCK class.
853 kes Add code to tell the OS that we no longer need a cached
854 file that we were reading. In findlib/bfile.c. Also,
855 only cache files that we are reading. Thanks to
856 Tobias Oetiker <tobi@oetiker.ch> for the idea.
857 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
858 kes Implement script to automatically generate cats and dll .def
860 kes Update README.mingw32 to include new .def file generation.
861 kes Correct typo in UTF-8 error message as reported by:
862 jhernandez <julianhernandez@gmail.com>
863 kes Add additional sm_check() code on debug level 1.
864 kes Set default debug level to 1.
865 kes Trap SIGABRT in attempt to get traceback.
867 kes Reduce bat connect timeout from 30 to 15 seconds.
868 kes More restructuring and implementing BSOCK class in place of
870 kes Remove a few unnecessary malloc() tests in crypto code.
871 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
872 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
873 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
875 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
877 kes Fix Verify InitCatalog. The attributes were not pointing to the
878 correct saved location.
879 kes Implement message callback so that GUI is sure to get all
880 daemon messages. Currently displayed in a dialog in bat.
881 kes Ignore SIGUSR2 (Bacula timer) in bat.
882 kes Apply regress patch from bug #859 to allow regress to work
883 with Solaris compiler.
885 kes Begin adding TLS support to bat.
886 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
887 clean up lex.c and make it more readable.
889 kes Move more bnet functions into the BSOCK class.
890 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
891 kes Complete change of berrno strerror() method to bstrerror()
895 kes Cleanup incorrect email addresses in bsmtp.
896 kes Make bat display initial messages rather than discard them.
898 kes First cut of adding .mod to the run command.
899 kes Implement auto display of messages in bat.
900 kes Enhanced preferences to allow all Bacula output to be
903 kes Try to make bsmtp date routines more generic.
904 kes Fixed bug #856 autochanger documentation.
905 kes Rework bsmtp date editing for Win32. This fixes bug #854.
906 kes Add new cats entry point so Win32 builds.
908 kes Attempt to fix bsmtp date editing on OSes without %z editing.
910 kes Do better checking for the MySQL 64 bit libraries looking for both
911 .a and .so libraries.
912 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
913 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
914 kes Require the thread safe version of MySQL during configure. Thanks
915 to Andre Noll for pointing this out.
916 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
917 continuing in migration code.
918 kes Apply implementation of tray-monitor font derived from gnome-console
919 submitted by Andreas Piesk <a.piesk@gmx.net>
921 kes Eliminate important memory loss in SQLite
922 kes Fixed the batch insert MySQL thread specific data that was not
923 being freed. See cats/mysql.c:db_thread_cleanup().
924 kes Fix restore before command.
925 kes Convert old hdr.name to name() in a few places.
926 kes Implement update jobid command.
927 kes Return all time_t dates in db_get_job_record()
928 kes Stop watchdog in SD earlier.
929 kes Put Pool just after Storage in please mount message.
930 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
933 kes Update the po files.
934 kes Fix Verify InitCatalog by making it cache attributes.
936 kes Change name bacula-bat to bat for man 1 page to correspond to
938 kes Check for client and store NULL pointers in status command. This
940 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
941 kes Fix sign extended editing of %p.
942 kes Clean out a little old #ifdefing in cats/mysql.c
944 kes If time diff between DIR and FD is more than 600 seconds convert
945 INFO message to WARNING.
946 kes Implement heap size display in status for all daemons.
947 kes Attempt to fix MySQL db open memory loss (not successfull).
948 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
949 kes Eliminate memory loss in MySQL (possibly other SQLs) during
950 Query. This looks like a MySQL but but by doing extra releases,
951 the memory goes away. This should fix bug #847.
953 kes When backup fails, cancel SD before waiting for sd termination.
954 kes If SD is waiting for FD to connect during cancel, wake up the
956 kes Fix fsf code so that errno is correctly reported.
957 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
959 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
960 so that Bacula doesn't later stumble into a seg fault.
961 kes Use the term Restore Client in the restore Job report.
962 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
963 the original job's FileSetId.
964 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
965 spooling in migration jobs. Not yet tested.
966 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
967 reading conf file from a pipe. However, do it with open_bpipe()
968 rather than popen. Not yet tested.
970 kes Fix an ugly bug where the VolCatBytes were getting updated
972 kes Implement bconsole memory command that prints current memory
973 usage, plus smartalloc dump.
974 kes Clarify some error messages in backup, admin, and migrate.
975 kes Shrink label dialog to smaller size.
976 kes Invert Cancel OK buttons on restore to be OK Cancel.
977 kes More strerror() to bstrerror() conversions.
979 kes Start implementing bstrerror() in place of strerror().
980 kes Stripping path -- seems to work.
982 kes Prevent door and port files from being restored (mostly
984 kes Free an unreleased buffer in compat code.
985 kes Change console Job name from *Console* to -Console- to eliminate
986 Win32 filename problems. Put Win32 path separator when creating
987 Console file. This fixes bug #846.
988 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
990 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
992 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
993 to force Win32 error message.
995 kes First cut strip path. The data should be passed to the FD,
996 but nothing is done with it yet.
997 kes Enhance the digest and signature routines in the crypto
998 library to accept a JCR and to use it to print error messages
999 so that they will go in the Job report rather than the daemon's
1001 kes Simplify some of the verify signature code.
1002 kes Simplify a few of the alternative returns in the signature
1005 ebl Use only POSIX regex instead of GNU regex in breg.c for
1006 File relocation. It fix broken freebsd compilation.
1007 kes Convert all other Dir files to use new ua class message
1009 kes Tentative fix for missing digest signature in bug 807.
1010 kes Correct handle problem in new win32_ftruncate routine.
1011 kes Convert ua_purge.c and ua_update.c to use new ua class
1012 message routines for bat.
1014 kes Correct incorrect installation of LICENSE in Win32 installer.
1015 kes Display LICENSE at the beginning of the Win32 install.
1016 kes Attempt to correct the need for the png files to be installed
1018 kes Reapply my bat.conf install script in qt-console. I think I
1019 editted bat.pro instead of bat.pro.in and it was lost.
1020 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1021 the /var/lock/subsys for subsysdir. Also corrects typos in the
1024 kes First cut update job.
1025 kes Correct configure to include qmake of src/qt-console directory.
1027 kes Make restore job yes/mod/no print in one command so GUI works.
1028 kes First cut implementing backup and restore client.
1029 kes Correct editing in Verify output that caused a seg fault.
1031 kes Insure that bat.conf is not overwritten during installation.
1032 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1033 while I was implementing migration in March 2006 !
1035 ebl Cleanup file relocation, using char *RegexWhere instead of
1036 char *where + bool where_use_regexp
1037 kes Update some manpages and add bat manpage.
1038 kes Make a first cut at converting bacula.spec.in for bwx-console
1040 kes Apply patch from John Goerzen to add hostname as fourth argument
1041 to make_catalog_backup script.
1042 kes Fix typos I introduced into bsmtp.c
1043 kes Make pm_strxxx() routines handle input of NULL pointer. This
1044 is to protect from NULL pointers returned from SQL databases.
1045 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1046 kes Add more debug to FIFO code -- fix fifo regression test.
1048 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1049 kes Add thread timer to bnet_connect() to break from OS if wait time
1052 kes Update Win32 build to include new files, new symbols, and
1054 kes Implement socket level heartbeat (tcp_keepidle)
1055 ebl Commit File relocation patch
1056 kes Make bat have 'make install' target.
1057 kes Warn during install if old gnome-console binary found.
1058 kes Warn during install if old wx-console binary found.
1059 kes Add -8 option to bsmtp command line to add content type utf-8.
1060 Fixes bug #809. (Character coding problem in bsmtp).
1061 kes If < is found in target (from, to, cc) then do not enclose the
1062 target in < > in bsmtp. Fixes bug #772 (malformed address).
1063 kes When printing certain items in dbcheck, stop after 300000.
1064 Fixes bug #822. (dbcheck loops).
1065 kes Incorrect status in Dir after waiting for mount with poll set.
1068 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1070 kes Print waiting to reserve a device every 5 mins.
1072 kes Don't call close_part in label.c if tape and relabel.
1073 kes Don't free volume if busy in close() -- should help with
1075 ebl Fix #824 RunScript bug (After script could be execute twice)
1076 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1077 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1078 Add a regression script to test RunScript
1080 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1083 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1084 deprecated. No additional bugs will be fixed, and they will be dropped
1085 in a future release (probably 2.4.0).
1086 kes Change name of wx-console to bwx-console to make it more Bacula
1088 kes Change the name of gnome-console to bgnome-console to make it
1091 kes Some time in March, a Feature Request with patch from Jorj Bauer
1092 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1094 The ability for the director to validate a Client (FD) CN against
1095 an arbitrary set of patterns rather than the hostname, with
1096 A new 'TLS Allowed CN' set of directives which are implemented
1097 in the Client resource. Then pattern matching is used in place
1098 of hostname matching against the Certificate's CN. As an example, we
1099 have certificates which (a) use a local CA, and (b) have a CN of the
1101 kes Add new/changed entry points to Win32 build
1102 kes Create unaccepted-projects for projects that are not accepted.
1103 kes Simplify locking in the reservations system.
1104 kes Add more debug code in reservations.
1105 kes Make sure error condition on reserving a volume is handled correctly.
1106 kes Correct handling of volume_in_use.
1107 kes Correct handling of initializing a device.
1108 kes Move handling of broadcasting releasing a device into release_device().
1109 kes Correct attaching dcr to dev so that it is only done if device
1110 is properly initiated.
1112 kes Locking debug level tweaks in SD.
1113 kes Tweak new Volume code.
1115 kes Add exec external-command [wait-seconds] to bconsole. This
1116 executes the external-command. Note! normally external-command
1117 should be enclosed in double quotes.
1118 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1119 it should normally be off in a production system.
1121 kes Implement die command for SD so that we can force it to dump.
1122 kes Implement SD lock debug code.
1123 kes Implement new algorithm for keeping Volume list in SD. It
1124 is now owned by the device.
1126 kes Implement new code for freeing in use volumes that should
1127 resolve if not all, some of the problems of multiple drive
1128 tape conflicts described in bug 801.
1130 kes Fix gui/bacula-web/images files in svn.
1131 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1133 ebl Fix a bug in batch mode (in string escape)
1134 kes Correct migration prune SQL typo that crept in in a
1135 recent 2.1.x change.
1137 kes Move bnet_despool() into class in bsock.c
1138 kes Modify job report to include director name and Build OS.
1139 kes Move drop root privilege and check_catalog() before fork.
1140 kes Add update database scripts (version 9 to 10) to updatedb directory.
1142 ebl Check size and age of each file after its backup to see if
1143 it has changed during backup, if 'checkfilechanges' is set.
1144 The FD will do an extra check (stat(2)) after
1145 each file backup. mtime, ctime and size are compared with
1146 'before backup' information. If time or size mismatch, an
1147 error message will be generated. You must upgrade FD to use it.
1149 kes Make database name and user configurable
1150 --with-db-name=xxx --with-db-user=xxx
1151 kes Add back database type to message.c for debugging.
1153 kes Implement dir_sql() which issues an SQL query.
1154 kes Modify bat medialist to use dir_sql() and do some minor C++
1155 formatting as well as eliminating a number of pointers, simplifing
1158 kes Fix some of the mtx-changer grep commands for tape label readers.
1159 kes Convert a number of bsendmsg into the appropriate send/warning/error
1160 message class calls.
1161 kes Suppress the using database message in the .sql command.
1162 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1164 kes Add context menu for floating a window.
1165 kes Some minor cleanup and name changes in qt-console
1166 kes Add doing mt setblk 0 in Win32 mtx-changer.
1167 kes Apply Martin's bug fix to move definition of ENODATA for
1169 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1170 sqlite2 and sqlite3.
1172 kes More pruning cleanup.
1173 kes Turn on wait_for_drive by default in mtx-changer.
1174 kes Turn on Batch insert code by default as it now passes regression.
1175 kes Add ./configure --enable-bat to enable building of Bat.
1176 No install yet though.
1178 kes Implement a new .sql command for bat.
1179 kes Implement code to turn off pruning in obtaining the next volume.
1180 Pruning is turned off for the status dir command, but turned on
1181 for SD requests and for the list nextvolume command.
1183 kes Correct Qmsg() that was not updated correctly when committing a
1184 previous change (probably the recent TLS patch).
1186 kes Write new subroutine is_volume_purged() that explicitly checks
1187 if the Volume is purged, and if so marks it as such. This should
1188 resolve problems reported about needing to mount twice to recycle
1190 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1191 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1192 amount of duplicated code.
1193 kes Do volume pruning only for the Media Type desired (reduces pruning time
1194 if multiple Media Types are in the same pool).
1195 kes Implement more detailed info in the Job report for the Bacula version
1197 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1199 ebl Add bbatch tool to bench database and insert mode.
1200 Fix sql quote stuff in batch mode
1201 Fix sql stuff for mysql
1203 kes Correct problems with am/pm scheduling. Fixes bug #808.
1204 kes Implement new prunning code that prunes up to 1000 jobs at
1205 the same time. The same technique can be applied to a number
1206 of other prune/purge subroutines.
1207 kes Add an insanity check when starting a new tape job to ensure
1208 that the tape position has not been changed. If so fail the
1210 kes Fix Win32 build for dlls to add the folllowing:
1211 src/lib/bsock.c -- new file with new entry points
1212 src/lib/dlist.c -- new entry points
1213 src/cats/sql_create.c -- new entry point
1214 src/cats/sql_cmds.c -- new DATA item exported
1216 ebl batch mode cleanup bscan-test is ok now.
1217 kes Implement SD code to check length of disk volume before appending.
1219 kes Correct return status on db_batch... routines.
1220 kes Add call to db_write_batch_file_records() to migration code.
1221 ebl Fix AfterJob timing
1222 kes Move the checking of the database in initializion of the Director
1223 to after we drop privileges. This avoids the need for both root
1224 and bacula access to the DB.
1225 kes Correct a misplaced variable definition in src/filed/backup.c
1226 kes Correct how the new batch insert db_create_attributes_record()
1227 uses the arguments. Caused a seg fault in bscan.
1228 kes Implement lock() and unlock() methods in DEVICE class.
1229 Implement block() and set_block(xx) methods in DEVICE class.
1230 kes Modify bnet_connect() so that it uses time() to check for the
1231 wait time expiring (on some OSes, some system calls may not
1232 return immediately).
1233 kes Modify Verify to obtain the previous JobId when it is actually
1234 running rather than at schedule time (as it was in 1.38.x).
1235 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1237 kes When checking pid in pid file, continue running if the pid is
1238 the same as ours. This occurs on IRIX after a system crash.
1241 kes Extend new GUI API.
1242 kes Make the ua structure a class, and implement send_msg(),
1243 error_msg(), warning_msg(), and info_msg().
1245 kes Apply fix from for building wx-console on the Mac from
1247 kes Implement new select mechanism for GUI programs.
1248 kes Reorganize initialization of stackedWidgets in bat.
1250 kes Add updated nagios plugin supplied by Christian Masopust.
1252 kes More bat implementation.
1253 kes File migrate bug with Pool Occupancy using mediaid instead
1254 of jobids. Fixes bug #795.
1255 kes Fix orphaned buffers in filed backup and verify due to
1256 crypto buffers not freed during errors. Fixes bug #789.
1257 kes Extend new GUI api code to tree commands.
1258 kes Ensure that tree and dot commands check console ACLs.
1259 kes Permit marking directory with trailing slash.
1260 kes Allow 20 console connections (instead of only 10).
1262 kes Add smartctl call to bacula-sd.conf as an example of getting
1265 kes Modify jobq.c to let simultaneous restore jobs run. This may
1266 cause them to fail if they cannot get a drive.
1267 kes Add Client Connect Wait to Storage daemon to permit users to
1268 modify the time the SD waits for a FD connection.
1270 kes Correct virtual changer check which was backwards. This caused
1271 volumes to be unloaded into slots already occupied.
1273 kes Apply Command ACL filter to JobId list in restore command.
1274 kes Correct typeo in var.c patch.
1276 kes Don't let Bacula prune File or Job records for the current Job.
1277 kes Fix variable substitution pad + inc bug reported (with patch)
1280 kes Correct SQLite log table index as reported by Luca Berra.
1282 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1284 kes Begin implementing new comm signals for API.
1285 kes Fix a few places in lib/message.c where the open fd may
1287 kes Continue implementing lib/bsock.c (real class). Make jcr,
1288 who, host, and port private. There are new methods to access
1289 them for non-class use. This required touching a number of files.
1291 kes Add LANG=C to autoconf/randpass so it works with languages other
1292 than English. Fixes bug #788.
1294 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1296 You will not be able to generate Include/Exclude list any more.
1297 It will be fixed soon.
1298 If you want to use this, you can apply
1299 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1301 kes Restore of sockets created false error messages because Bacula
1302 no longer restores sockets, but the code was still trying to
1303 set the attributes on a non-existent file. Reported by a user.
1304 ebl finish RecyclePool feature
1305 Media will takes Pool.RecyclePool
1306 when moving from Scratch to a Pool or when user will do
1307 update volume=xxx frompool
1308 To use it, add RecyclePool = aPool to your Pool resource
1311 RecyclePool = Scratch
1315 kes Expand new BSOCK class adding signal() and new BNET signals.
1316 kes Begin enhancing the dot commands adding a new API function
1317 that returns more information and will make it easier
1318 to interface to the Director from a program.
1320 kes Make DEVICE fd private. Its new name is m_fd, and can be
1321 obtained with dev->fd() outside the class. This is the
1322 first of many DEVICE members to be made private.
1323 kes Implement Michael Renner's idea on having a virtual disk
1324 changer. I made some minor modifications (e.g. I did not
1325 implement the Virtual Changer directive, but simply set
1326 the Changer Command to an empty string.
1328 kes Implement a BSOCK send() method that writes the whole record
1329 in a single write() request rather than in two.
1330 ebl add update volume=xxx recyclepool=yyyy
1331 volume takes recyclepool from pool when using update volume=xxx from pool
1333 kes Fix encryption deblocking bug, which caused some restored files
1334 to be truncated. This fixes bug #763.
1335 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1336 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1338 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1339 ebl Use btime_t instead of uint64_t in media patch.
1341 kes Optimize the use of the database a bit in the Status dir command.
1342 Only open it when needed, ensure that if any previous database
1343 was opened, it is closed.
1345 kes Correct VolCatBytes bug from media patch.
1346 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1347 in the case of orphaned records.
1348 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1349 and File records in 300K chunks to be more efficient. This
1350 idea came from Juan Luis Frances (if I remember right).
1351 kes Apply Eric's scratch patch that moves a purged Volume to
1352 the RecyclePool. Question: how is RecyclePool set? what
1353 happens to the ScratchPool?
1354 kes Apply Eric's media patch that collects read/write media
1355 times as well as byte counts. This patch requires a
1356 simultaneous upgrade of the DIR and SD. Note, there
1357 should be some way to turn off timing. I'm not sure
1358 times are in Bacula units.
1359 kes Apply Eric's batch-insert patch.
1361 kes Update projects list.
1363 kes Implement Include/Exclude file lists in FD as dlists using
1364 the new dlistString class. This permits efficiently having
1365 large include/exclude lists and completes project Item 25.
1366 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1367 console is authorized to cancel the job. This fixes bug
1369 kes Modify SD so that the VolCatJobs medium record is updated
1370 at the beginning of a Job rather than the end. This
1371 fixes bug #775 where exceeding MaxVolJobs caused jobs
1373 kes Added a mutex around getting and setting Volume information
1374 so that multiple simultaneous jobs will single thread.
1376 Switch to using Subversion
1377 kes Remove src/pygtk-console/ from configure
1379 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1380 plus the entrypoints.
1381 kes Apply patch supplied that corrects debug print
1382 in canceling jobs for max run time. Supplied as
1383 part of bug #621, which was previously fixed.
1385 kes Test on job_canceled() and sd_msg_thread_done inside
1386 loop starting the message thread to avoid a race condition.
1388 kes Remove rl_catch_signal from console.c as it conflicted
1389 with the header definition. Fixes bug #765.
1390 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1392 kes Clarify some stored/acquire messages to indicate if the
1393 problem is with read or append.
1395 kes Fix memory leak with storage ids in cats/sql_get.c
1396 kes Terminate watchdog earlier to avoid reference to released
1397 memory -- reported by Jason Austin.
1398 kes Move closing the database from jobq.c to the director daemon
1399 termination routine. This fixes memory leaks for shadow jobs
1400 (i.e. migration jobs).
1401 kes Free up the unique jobid chain items in migrate.c. This fixes
1402 a memory leak problem.
1403 kes Convert some ugly looking for statements to use foreach_alist
1404 in findlib/find.c. This will facilitate converting the structures
1405 to use dlist (for large include/exclude lists).
1406 kes Fix a bug in the btree.c and btree.h routines, then rename them
1407 rblist and add them to be built in src/lib. Include some new
1408 methods written by Rudolf Cejka that make the code more readable
1409 (hides some of the ugly casting).
1410 kes Add set_next() and set_prev() methods which make the code much more
1411 readable. Also add a new dlistString class that facilitates storing
1412 strings in dlists. To be used in the large include/exclude lists.
1413 kes Make some trivial modifications to lib/tree.h that use rblist
1414 rather than dlist for storing the tree links. This was suggested
1415 by Rudolf Cejka. The result of this is that the restore tree now
1416 uses red-black binary trees rather than simple linked lists. This
1417 should give rather dramatic speed improvements for directories
1418 contining large numbers of directories/files (more than 10000).
1420 kes Fix maxruntime bug #621.
1422 ebl Implement the include JobID in spool file name project.
1423 kes Reorder projects file in order determined by Jan 2007 vote.
1424 kes Implement item #12 on project list -- quick release of FD by
1426 kes Fix open of SQLite3 db where user does not have write permission
1427 so that DIR does not crash. Fixes bug #761.
1429 kes Add back missing @ in Win32 Makefile.
1430 kes Change 'Device not configured to autolabel' from INFO
1432 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1433 which should restart an indefinite # of times.
1434 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1435 other DIR specifications.
1437 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1438 Fix path quoting in SQLite scripts.
1439 Fix problems with SHGetFolderPath.
1441 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1443 kes Fix Job restart on error bug that promotes an Inc to a Full
1444 backup. This should fix bug #755.
1445 kes Add qt-console and first cut of code.
1449 kes Fix Bacula->Documentation link on Win32 to point to index.html
1450 instead of bacula.html. Fixed bug #750.
1451 kes Return JobId in db_get_job_record() when JobId==0. This should
1453 kes Do not release source pointers when restarting a failed job.
1455 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1456 This *should* fix bug #747.
1457 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1460 kes Modify USTORE constructor to set an empty store_source string,
1461 and don't copy the store_source string in a cancel. Hopefully
1462 this will fix Arno's seg fault, bug #744.
1463 kes Add back code to disable conio in configure. Fixes bug #743.
1464 kes Correct the Options scanner in the FD to correctly handle
1465 SHA1 option, which was eating the next option. Reported by
1467 kes Add code to indicate when the SD is spooling, spool wait, and
1468 despooling as requested by Alan Brown.
1470 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob