1 Technical notes on version 2.2
5 kes Force unload of volume when wrong volume mounted in SD.
7 kes Fix bat seg fault at termination.
8 kes Add Bacula generated version to bat about box.
10 Beta Release Version 2.2.10-b1
12 kes Permit multiple simultaneous restores -- experiment.
14 kes Backport development stream SD reservation system changes.
18 kes Move final volume swapping code to DCR method and
19 call it from acquire_for_read().
20 kes When wrong volume is mounted during read, unload_autochanger.
22 kes Stop searching for Volumes in SD askdir if DIR returns the
23 same volume name twice in a row.
25 kes Tweak the swap Volume from one drive to another code so that
27 kes Resolve several problems with recycling that broke the new
28 code (these problems are in 2.2.9 as well).
29 kes Remove the volume lock when calling the sysop code.
30 kes Don't mark a reserved volume with no writers as unused otherwise
33 kes Rework class structures for VOLRES, DCR, and DEVICE to make
34 the method names a bit more logical, and for more logically
35 handling the responsibilities.
37 kes Remove redundant code in terminating the scheduler that just
38 causes a seg fault in many cases.
39 kes Cleanup releasing a volume and make it a DCR method.
40 kes Improve algorithm for detecting pre-reserved volume and
43 kes Tweak volume swapping code so it works.
44 kes Correct name overloading in mount.c
45 kes Replace released flag in VOLRES with reserved and add access
46 methods for the VOLRES class.
47 kes Prevent volume from being released while being swapped.
48 kes Refactor parts of stored/mount.c
50 ebl Add sanity checks for VolWriteTime and VolReadTime
51 ebl Take care of bad clock changes while computing VolWriteTime
52 and VolReadTime. This should fix or limit #1066
53 kes Correct error string numbers in dird/catreq.c
54 kes Restructure reserving, acquiring, and mounting volumes. Calls to
55 autochanger are deferred for mount.c -- simplifes the code.
57 kes Do not prune any running job. It just fails the job.
58 kes Lock the volumes when changing dev->reserved_device and marking
59 the volume unused otherwise the device can get reserved by
60 another job before the volume is released, thus blocking it.
63 Beta Release Version 2.2.9-b7
65 kes Close bat console windows first to eliminate error message
67 kes Remove useless code in Scheduler that causes seg fault on
69 kes Correct some SD catalog request error messages.
70 kes Don't allow pruning of any running job.
71 kes Turn off code in read_record that causes a seg fault in the SD
72 when reading past an EOS_LABEL.
73 kes Turn off unloading the autochanger in reserve.c as it just
75 kes Lock volumes when unreserving a device.
76 kes Do not mark volume unused when recycling.
77 kes When acquiring, don't mark volume unused if it is reserved (busy).
79 Beta Release Version 2.2.9-b6
81 kes Eliminate ./configure warning on po directory
82 kes Fix bug #1063, reuse of freed ptr in list nextvol.
83 kes Release regex compile buffer in filed/job.c
84 kes Add proper type of const char in sql_create.c
85 kes Turn off debug in daemon termination routines
86 kes Move free_volume_list() before devices are freed in stored.c
87 kes Fix reference to uninitalized stack variables in bregex.c.
88 This should correct bug #1067.
90 kes Fix possible seg fault in SD when freeing a volume entry.
92 kes Apply patch from bug #1069 that corrects spurious error messages
93 when ACLs enabled on SGI but no ACL exists.
94 ebl Fix a storage deamon segfault at debug level 500.
96 Beta Release Version 2.2.9-b5 -- not released
98 Beta Release Version 2.2.9-b4
100 kes Re-enable code to remember last volume mounted on a non-tape
102 kes Add patch supplied in bug #1068 that fixes a SD crash when using
103 a Virtual autochanger.
104 kes Generate correct JobMedia records during spooling/despooling when
105 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
106 <tih@hamartun.priv.no> for excellent analysis and testing.
108 Beta release Version 2.2.9-b3
110 kes Rework certain SD locking based on gdb tracebacks of deadlocks
111 sent by Eric. This code now uses only the volume_lock() rather
112 than the reservations lock when at EOM and acquiring a new
114 kes Ensure only one exit point in several subroutines.
116 Beta release version 2.2.9-b2
118 kes Fix to initial tape drive open to release the volume name
120 Beta release Version 2.2.9-b1
122 kes Fix to JobMedia fix.
123 kes Fix bug pointed out by Peter Much that causes the StorageId to
124 be updated when reading a tape (during migration, it could have
125 been incorrectly set to the write StorageId).
127 kes Implement autostart scripts for Debian
129 kes Fix mtx-changer.in for broken Debian mt program.
131 kes Massive commit of all fixes and back ports to create 2.2.9
133 kes Apply doc fix from bug #1062.
134 kes Resolve crash and improper restore wx-console Win32 restore
135 GUI. Fixes bug #1065.
136 kes Update Win32 wxWidgets to latest version.
137 kes Attempt to do correct handling of Win32 mount points. Should
139 kes Fix Win32 FD backup/restore memory leak due to improper termination
140 of BackupRead/Write. This fixes bug# 1038.
141 kes Add const to AIX prototype for initgroups()
143 kes Undo bug #1047 heap overrun fix as it is not correct.
145 kes Fix creating first JobMedia record during Migration to include
146 proper index. This caused slow restores of migrated jobs.
148 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
149 and do not strip paths on symbolic links.
150 kes Set catalog backup database and user name from values specified on
151 the ./configure line.
152 ebl Apply patch to correct bug #1031, about wrong pool source information
155 Release Version 2.2.8
157 kes Apply patch from Martin to correct bug #1040, bscan sets existing
159 kes Fixed important spelling error in doc -- bug #1045.
161 kes Move initialization of read/write res lock earlier in the code.
162 This fixes the crash with a null conf file. This fixes bug
164 kes Redefine CURES in lib/parse_conf to be URES and move it all
165 into lib/parse_conf.c -- this responds to bug #1042, but does
166 not fix it. The fix is not to compile with FORTIFY_SOURCE.
167 kes Backport fix de-referencing a NULL pointer in the scanner from
168 the trunk SVN. I don't think this was reported as a bug.
170 Beta release Version 2.2.8
172 kes Re-enable the new job code editing (%f).
174 kes Fix bsnprintf for float point numbers. I broke recently when
175 parameterizing some variables. This fixes bug #1036.
177 kes Move Heartbeat documentation from Job to Director resource.
178 This fixes bug #1033.
180 kes Fix existing switch drive SD code to call autochanger to release
181 any old volume. This must be done to keep the autochanger from
182 releasing subsequently newly reserved volumes in doing a close().
183 This should possibly fix bugs #1032 and #1018.
184 kes Apply big backport of current SVN SD code that corrects a number
185 of race conditions. This is a first step in fixing bug #1018.
187 ebl Fixes bug #1028 where "Selection Type" option was not usable
191 Release Version 2.2.7
193 kes Partial back out (disabled) %f job code editing because it
194 does not build on Win32.
195 kes Fix seg fault Frank Sweetser reports in regression testing
196 on his systems. The problem was that the original author of
197 bsnprintf.c did not take into account the side effects of
198 using ++x in the argument to a #define.
200 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
201 that implements double quoting include names in conf files,
202 and also allows piping input by having the first character
203 be a vertical bar (|).
204 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
205 that implement %f in RunScripts to pass the FileSet name.
206 kes Skip leading | when lex input comes from a pipe as suggested
207 by Michael Stapelberg <michael@stapelberg.de>.
209 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
210 Nerijus Baliunas <nerijus@users.sourceforge.net>
212 kes This patch corrects a problem where the maximum concurrent storage
213 jobs counter gets out of sync during restore jobs causing jobs to
214 'wait on max Storage jobs'. This patch fixes bug #1009.
216 kes Add new include to postgresql.c suggested by Marc Cousins so
217 that it compiles correctly with pgre version 8.3. Also fix
218 misuse of %x with pointer (should be %p).
220 kes This patch fixes bcopy so that it produces correct Volumes.
222 kes This patch eliminates spurious output to the console during a VerifyVolume
223 job that contains encrypted data. It fixes bug #1024.
225 kes This patch prevents the 'status dir' command from trying to use a scratch
226 volume and possibly moving it from one pool to another. This patch fixes
229 kes Fix --archivedir addition to configure. Replace it with
230 --with-archivedir in configure.in This fixes the regression
232 kes This patch fixes bug #1012 where the job is canceled because
233 of Max Run Time exceeded when the job has not yet started.
235 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
236 one 'part' to write. Instead of each part being stored on disk,
237 written to DVD, then deleted from disk, all parts are written to disk,
238 and only the last is written and deleted from disk.
240 kes Correct typos in disk-changer.in
242 kes This patch fixes the status command to include the formating string for
243 JS_AttrInserting. It fixes bug #1021.
244 kes This patch should fix the Mac OS X build problem on the latest
245 Darwin, where sys/types.h was not included correctly (apparently
246 due to a change in the Mac headers). The solution was to explicitly
247 ensure that it is defined for the ./configure.
248 This patch also has a rebuild of configure that includes the Debian
249 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
250 kes This patch should ensure that queued messages to the console are
251 displayed as soon as possible. It should fix bug #1007, but has been
252 reported not to work.
254 kes This patch fixes the infinite loop when trying to increase the
255 maximum number of volumes in a Pool during the add command.
256 This patch fixes bug #1008.
258 Release Version 2.2.6
260 kes Get fix for joblist bug in bat from trunk.
262 kes This patch fixes bug #1003 where putting the message output from
263 a Verify job into the catalog results in a recursive loop. The problem
264 seems to show up only with postgresql (to be verified).
266 kes Fix bug #942 where lots of emails where generated when the heartbeat
267 interval was low and Bacula wanted a different tape from the one in
270 ebl Apply 2.2.5-lastwritten.patch to fix the LastWritten field
271 which was updated during a restore (or a reading migration) bug #982
273 ebl Use qmake-qt4 instead of qmake when available (debian system).
275 kes Add a security warning to src/cats/make_catalog_backup.in indicating
276 that passing the password via the command line (arg 3) is insecure.
277 This responds to bug #990 (it doesn't fix it).
278 kes Apply 2.2.5-postgresql-errors.patch
279 kes Remove unneeded File table index on JobId, which is already
280 present as the first index of another multi-index.
282 kes Set default debug_level to zero. This corrects bugs #991 and #993.
283 kes Fix a crash in bat when it cannot connect to the Director for example
284 if the Director is not running.
286 kes Activate Close button on tray-monitor window. This fixes
289 kes Fix spurious warning message printed when creating a volume with
290 a LabelFormat. This fixes bug #976.
292 Release Version 2.2.5
294 kes Add JobId in place of Job name in all the Jmsg() output.
295 kes Correct the APP_DESC for the Win32 storage service (remove an e).
297 kes Add new SD despooling attributes and Dir inserting attributes
298 job status codes. This fixes bug #961.
299 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
301 kes Fix doc issue. This fixes bug #963.
302 kes Fix listing performance problems in bat. Pointed out by
304 ebl Fix replace on restore. This fixes bug #969
305 kes Fix bat code that tests for Win32. This should fix bug #968
306 kes Query 5 list wrong Vol after migration. This fixes bug #960
308 kes Correct lib/Makefile.in to include enh_fnmatch.o that was removed
309 in back porting from 2.3.x
311 kes Backport almost 4000 lines of 2.3 code that fixes a number of bugs.
312 The details are included in the notes in this file.
314 kes Backport 2.3 code that fixes: it fixes incorrect or incomplete error
315 messages; it fixes a problem opening the SQLite3 database when multiple
316 simultaneous jobs were running; it fixes a bug with certain versions of
317 MySQL where batch inserts failed because of table name character case
318 (upper/lower) differences.
319 kes Fix race condition that drops final block written to volume.
320 This happens in rare cases with multiple simultaneous jobs
321 when the Volume fills. This fixes bug #964. May be related
322 to bug #935 and possibly #903.
324 kes Fix FD->SD authorization failure, which was due to spurious
325 wakeups from a pthread_cond_timedwait(). Simply check the
326 predicate before continuing. This fixes bug #953
327 dvl Add new configuration item --archivedir
328 dvl Adjust regression tests to use tmp not /tmp. This will allow
329 multiple concurrent runs of the regression tests.
331 kes Eliminate more strerror() and replace with bstrerror().
332 kes Remove BSD getopt and replace with unrestricted IBM version.
333 kes Fix Win32 build for changed calling sequences.
335 kes Fix FD->SD authorization failure, which was due to spurious
336 wakeups from a pthread_cond_timedwait(). Simply check the
337 predicate before continuing. This fixes bug #953.
338 kes Add const char where needed (more to do).
340 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
341 kes Don't overwrite error message in check_tables_version.
343 kes Unlock batch insert tables with same calls used elsewhere.
344 kes Allow starting 59 jobs a second.
345 kes Make SD session key more random.
346 kes Add retry for SQLite opening db if it fails. Probably helps
348 kes Suppress extra error messages during batch insert failure.
350 kes Put some FD auth code on dbglvl rather than fixed.
351 kes Return insert attributes error message in db msg buffer to avoid
352 false error messages. Helps fix bug #966.
353 kes Separate batch init error messages. Probably helps fix bug #966.
354 kes If Dir gets an error during inserting attributes, cancel SD.
355 This reduces unnecessary error messages.
357 ebl Cleanup batch insert code. Probably fixes bug #965.
359 kes Turn off some code when batch insert not enabled.
360 kes Edit FD name in connect error messages.
362 kes Add code to handle tray monitor separated from Win32 FD.
363 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
365 kes Fix ANSI tape labeling. This fixes bug #954.
366 kes Increase the max block size to 4MB fixes bug #957.
367 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
368 is not properly mounted (recognized) during a poll.
369 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
370 Job that has differences reports Verify OK.
371 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
373 Release Version 2.2.4
375 kes Increase size of name string when FD making connection to SD.
378 kes Add waits to multiple exit detection code to try to force pid
379 file to always be deleted.
380 kes Restore good dev.tar.gz to rescue set appropriate binary property.
382 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
383 trying to switch drives by checking for blocking before unblocking.
385 kes Cancel storage daemon in all cases where FD reports error. This
386 should fix virtually all cases of bug #920.
388 kes Fix error message that was clobbered when Dir tells SD it does not
389 have write permission on Volume. This should fix a minor point
390 in bug #942, but not the main problem.
391 kes Add code to cancel job in SD if FD connection fails. This should
393 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
394 kes Fix migration code to get correct Volume name with multiple volumes
395 by skipping |. Fixes bug #936.
396 kes Implement patch supplied by Landon to fix bug #944 where using
397 TLS with bconsole uses 99+% of the CPU.
398 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
400 kes Move patches into patches directory.
402 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
405 ebl Using 'm' in bconsole will show messages like before,
406 and not memory usage.
408 Release Version 2.2.3
409 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
412 kes Fix bug #935, and probably also bug #903 where files were not
413 restored. MediaId was not properly set in JobMedia record after
416 kes Add ./configure search in qwt-qt4 for qwt package
417 kes Apply Martin Simmons patch that should turn off the new API usage
418 when batch insert is turned off allowing building on older
421 Release Version 2.2.2
423 ebl Detect if new PosgreSQL batch insert API is present.
424 kes Correct incorrect mempool call causing Director crash.
425 sb Update spec files for 2.2.1 release
427 Release Version 2.2.1
429 kes Update POTFILES.in
430 kes Cleanup a few underquoted AC_DEFUNs in configure
431 kes Apply patch from Martin Simmons that adds a test for va_copy to
434 kes Fix bug #921 by increasing the number of tries to create a new volume
436 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
437 can be called multiple times. Implement a version for machines
438 without va_copy() that gets a big buffer.
440 kes Integrate more portable zone offset code into bsmtp.c
441 Submitted by Attila Fülöp.
443 kes Fix bad SD->FD return status reported by
444 (James Harper) <james.harper@bendigoit.com.au>
445 ebl Fix a bug in read_close_session which return random status
446 thanks to James Harper
448 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
449 and directory names during restore of single file/directories.
450 kes Add sanity checks to .sql command when string is empty. Hopefully
451 that will resolve Dirks Director crash.
453 kes Apply patch submitted by Martin Simmons that corrects a seg fault
454 in the bsmtp chat subroutine when debug is >= 10.
456 kes Fix Director crash when running bat SQL queries.
457 kes Add David's notes on Item 8: Copy pools.
459 kes Rework projects file to be current and ready for a vote.
460 kes Enhance lex scanner error message.
462 kes Tweak LICENSE file to mention BSD code.
463 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
464 if specified on the ./configure.
465 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
466 This class is intended to allow us to open a second bsock to the
467 Director while in the restore subdialog.
469 kes Fix configure to create bat Makefile before creating dependencies.
470 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
471 kes Add a tooltip to the tray monitor.
472 dvl Set the Director's PID file before dropping privs. This fixes
475 kes Update AUTHORs file
476 kes Increase the default max concurrent jobs to 20 in FD and SD to
477 correspond with the default .conf files.
478 kes Rewrite the Win32 service routines. This eliminates the 3 copies
479 some different, of the same file created by RN when porting the
481 kes Rearrange some of the Win32 directories and the placement of the files
483 kes Set DEVELOPER flag in version.h
485 ========================================================================
486 Release Version 2.2.0
488 kes Apply a second doc patch from Marc.
489 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
490 improves the tips section that discusses how to setup multiple
493 kes Update bat README file.
494 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
495 corrects a typo in the Recycle status check in db_find_next_volume().
496 This will probably fix a number of annoying problems with multiple
498 kes Modify most of dird/msgchan.c to use bsock class calls rather than
499 bnet calls -- no functionality change.
501 kes Modify the Verify output to specify if files are missing on
502 the Volume(s) or disk. Fixes confusion in bug #916.
503 kes When more than one Volume is read in a migration job, the last
504 Volume bytes reported are from the last read volume rather than
505 the last written volume. Fixed. This fixes bug #910.
506 kes Fix display of Recycle flag after update volume=foo recycle=yes.
507 It previously printed New Recyle flag is: no. This fixes bug
510 kes Correct seg fault when switching tape drives during restore.
511 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
512 be used until after 2.2.0 release.
514 kes Remove fnmatch() in SD that permitted wild card specifications.
517 kes Fix %g in filename returned by SQL for browse tree reported by
519 kes Fix configure so that it puts config.out in the cwd rather than
521 kes Attempt to fix the locking problem reported by Eric in bug #906.
522 kes Make berrno class to leave errno unchanged after constructor call.
523 kes Make bnet_server use the heap rather than the stack to allocate
524 its socket fd pointers to avoid a crash at termination. Problem
525 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
527 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
528 and putting it in depkgs-qt along with Qt4.3.
530 kes Rework code in acquire.c that switches drives for reading when
531 the Media Type does not match. This should fix bug #906
533 ebl Fix a director segfault during job setup #907
534 kes Correct seg fault in postgresql when first operation returns no
535 rows. Fixes Dirks File browser problem seg fault with bat.
537 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
538 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
541 kes Implement PopUp YES/NO dialog for bat.
543 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
545 kes Correct RunScript to terminate job in FD on failure.
546 kes Change abort_on_error and AbortJobOnError to fail_on_error
547 and FailJobOnError in RunScripts.
548 kes Minor tweaks of code formating in RunScripts, principally to
549 avoid depassing 80 columns.
551 kes Eliminate one #ifdef Win32 in bsmtp
552 kes Implement grow tool to grow a file for testing very large databases.
553 kes Add big-vol-test to test Bacula seeking with > 5GB.
556 kes Modify find_next_volume() to return all values in Media record.
557 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
561 kes Update Release notes
563 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
564 Warning, in previous beta version, all media get from scratch keep their
567 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
568 This should fix bug #842. Made a note to look at removing the temp
569 files at the end of the install.
570 kes Add ability to mount and unmount a file device providing it is
571 marked as being removable and has the appropriate mount and unmount
572 commands defined in the Device resource. This fixes bug #830.
573 kes When applying a storage override, release all previous storage
574 definitions rather than just prepending the new storage.
575 This should prevent a good deal of confusion.
577 kes Implement ./configure search for qwt libraries.
579 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
580 Win32 FD. This should fix bug #893.
581 kes Remove an unnecessary beep in Win32 init code.
582 kes Update copyright dates in Win32 executable about boxes.
583 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
584 code with a BSD getopt.c and getopt.h.
585 kes Remove sched.h from the Win32 compat directory -- not used.
586 kes Remove the Exit menu item from the Win32 tray monitor. If you really
587 need to shut it down, do it through the services panel or the command
589 kes Remove some inappropriate Bacula FSFE copyrights.
590 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
591 kes Fix regress config non-portable test as pointed out by
592 Florian Heigl <florian.heigl@gmail.com>
593 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
594 as pointed out by Florian Heigl <florian.heigl@gmail.com>
596 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
597 Reported by Frank Sweetser.
601 kes Fix client-only build.
602 kes Integrate client-only fixes for bsys (initgroups) and conio from
603 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
604 kes Make arguments to get_scratch_volume() in same order as other
606 kes Rework the prune_volumes() subroutine so that after purging and
607 no volume found in desired pool, it will check for a scratch
608 volume. This prevents recycling the whole scratch pool.
609 kes Add code to status storage to print boffset_t (largefile support).
611 kes Move qwt (Graphics libarary for Qt4) to depkgs.
612 kes You now need a --with-qwt=<dir> to be able to build bat.
613 kes Update src/win32/cats/bacula_cats.def to include the new
614 db_get_query_dbids() call on Win32.
616 kes Correct a problem when selecting a scratch volume and moving
617 it to another pool that lost some columns.
618 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
619 kes Enhance Autochanger error messages to include Volume and device name.
620 kes Rework prune_volumes() code to take account of InChanger flag,
621 and to handle recycling volumes going to the Scratch pool and
622 current pool because the RecyclePool directive.
623 kes Implement a better and more efficient db_get_query_dbids() to
624 handle creating and passing back a list of DBIds.
628 kes Start work on new more efficient DBId subroutine. First use
629 will be for recycling volume to Scratch inchanger.
630 kes Increase number of JobIds in pruning from 1000 to 10000.
631 This to be replaced by above routine.
632 kes Begin implementation of building Qt4 on Win32.
633 kes Correct typo in fix I added for bad TLS shutdown.
634 kes Pull 2.0.3 patches into patches directory.
635 kes Update Release notes. Include qt-console in line count.
636 kes Update Projects file.
638 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
639 bug in migration code where a job that spanned two volumes
642 kes Implement new BST_DESPOOLING blocked state. Change from locking
643 during despooling in SD to blocking. This means that other threads
644 can work with the device structure, in particular the reservations
645 system while despooling.
647 kes Fix return in reservation message queue that missed clearing
648 the jcr lock (implemented 26Jun07 below).
649 kes Rename a number of dev methods to make locking function names
651 kes Document locking in lock.c. Move lock structures to new file
654 kes Move reservations message lock to lock jcr only this
656 kes Move main SD locking code into lock.c (new file).
657 kes Update Win32 build to include lock.c
661 kes Dirk committed the qwt library code for drawing graphs in bat.
662 kes Tweak install of qwt so that it is integrated with ./configure.
664 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
665 out by Eric (my typo).
666 ebl Fix configure.in to get batch mode enable
667 kes Return correct string from authenticate.cpp in bat when connecting
669 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
670 spurious line drops when using TLS.
671 kes Do not file reparse points when restoring a file that already
674 kes Implement Windows reparse points -- similar to directories, but
675 we do not descend into it. This is a first cut. They seem to
676 be backed up, but restore is not yet tested.
677 kes Remove restore_blocking in tls code when shutting a socket to leave
678 it in blocking mode. Hopefully this will fix the encryption bug
679 reported by Frank Sweetser.
680 kes When opening a file for backup, tell the OS that we are going to
681 read it sequentially -- optimization.
682 kes Change variable names in authenticate_director() to not conflict
683 with member names in bat. Caused great confusion with compiler,
686 kes Queue openssl error messages in case of comm problem.
687 kes Do shutdown() call if socket terminated.
688 kes Remove some duplicated code in tls.c
689 kes Move more of the bsock member variables into private and access
691 kes Add Frank Sweetser's tls-test to the regression suite.
693 kes Add Swedish sv.po file
695 kes Don't print clock skew message in FD if less than 3 seconds diff.
696 kes Add a bit of VSS info to status client.
697 kes Implement a first cut of Vista VSS, using Win2003 code.
701 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
702 loaded tape but uses first drive).
703 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
704 This was indeed a Win32 issue.
706 kes Simplify search of autochanger for in-use Volume.
707 kes Fix exit condition of check for in-use volume. kes Remove
708 inappropriate my_postgresql_free_result() in db_close()
710 kes Fix bad return in FD when encryption signature not found.
711 Probably caused a crash.
712 kes Inhibit missing encryption signature error messages for
713 file types where no signature computed.
714 kes Correct inverted check on autochanger in reservation system.
715 kes Tweak debug code in autochanger reservation.
717 kes Add some additional locking in the cats directory in subroutines
718 that modify packet variables called from batch insert.
719 kes Rework how dcrs are allocated. new_dcr() can now be called
720 with an existing pointer, and it will simply clean it up.
721 This allows the reservation system to test various different
722 devices, and will permit easy device changes.
723 kes A bunch of changes all over to handle new new_dcr() calling
725 kes Work more on the Volume management in the SD. Remember Volumes
726 for tape drives and for autochangers (even virtual disk changers).
727 kes When looking at the Volume list to reserve a drive, handle
728 autochanger names correctly by interating through the changer
729 devices. Also call the Director to see if a Volume is suitable
731 kes Fix some bugs in bscan. Make sure all media records are written.
732 Make sure that valid JobMedia records are written for disk files.
733 Previously they were completely wrong.
734 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
735 that the URLs don't change and so that the developers will all
736 work off the same copy. Rebuild from scrach.
737 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
741 kes Fix seg fault in FD from incorrect digest size.
742 kes Fix argument to non-OpenSSL crypto.c subroutine.
746 kes Remove a few malloc()s from the encryption code.
747 kes Use the class calls to bsock in filed/backup.c and restore.c in
748 place of the old bnet_xxx code.
749 kes Implement code that does an on the fly calculation of the
750 signing digest during restore of encrypted files. It makes
751 a best guess at the algorithm, and if it is not correct, will
752 then revert to the old code which reads the file after it is
754 kes Implement at least one missing crypto stream in stream_to_ascii()
755 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
756 #877 where a reload with bad syntax causes Dir to exit.
758 Cut: 2.1.14 beta (not released)
760 kes Do not free a volume on a tape drive until another volume is
761 mounted and read, or the autochanger unloads the volume.
762 This should help the SD re-use volumes that are already mounted,
763 and should fix bug #886.
764 kes Apply patch from user brettedgar that allows gnome2-console include
765 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
766 kes Apply patch from Lucien Weller that fixes day of week calculation
767 because of DST flag problem. Fixes bug #887.
769 kes Move find_next_appendable_volume() to after acquiring a valid device
770 in reserve.c. This fixes bug #864 -- confirmed by reporter.
772 kes Unable to reproduce bug 872. However added additional testing for
774 kes Bug #874 resolved by documenting SQLite limitations.
775 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
776 kes Bug #881 resolved by removing typo in mtx-changer script.
777 kes Made Frank Sweetser's wiki the official Bacula wiki with his
778 approval. Added a link to the wiki on the web page, and implemented
779 a backup from http://paramount.ind.wpi.edu
781 kes Fix update allfrompool to pass pool name.
783 kes Convert to pure GPL v2 license.
784 kes Fix sscanf problems reported by Peter Buschman that caused
785 a bus error on Solaris.
786 kes Rework (simplify) the select prompt in bat.
787 kes Move get_jobid_from_tid() into lib and create a
789 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
790 should definitely fix the problem of lost error messages in the
792 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
793 kes Eliminate tcpd.h from the project. Enclose the #include from the
794 library with extern C ...
795 kes Add print of signal name when a signal is trapped.
799 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
801 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
802 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
803 makes SQLit3 run 30 times faster, though a bit less safe.
804 kes Implement --with-batch-insert in configure and detection of thread
805 safe libraries. It is on by default, but turned off if no thread
806 safe library (e.g. SQLite 2) is available.
808 kes Fix Bacula PostgreSQL buffer overruns.
809 kes Do better checking for NULL results returned from PostgreSQL;
810 implement retry for failed queries; clear results buffer after
811 failed query. Hopefully this will correct the PostgreSQL failures.
813 kes Implement algorithm to handle only one appendable volume with
814 Prefer Mounted Volumes = no.
815 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
816 returned from a query.
817 kes Make volume lock recursive.
818 kes Implement an additional volume reservation algorithm that
819 starts by considering all reserved volumes then uses the
820 old brute force algorithm of searching the resources to
821 find a suitable device.
822 kes Add new reservations debug code and refine the old code.
823 kes Update the win32/dll/bacula.defs file.
825 kes Tweak reservations algorithm to permit a few more cases, i.e.
826 volume reserved, but on different drive, ...
827 kes Enhance SD status to include Pool and Media Type for drive in a
828 more readable format (a bit longer).
829 kes Fix PostgreSQL double free.
831 kes Minor refactoring of restore decryption code.
832 kes Add code to smartall.c to detect double free of a buffer.
834 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
835 so that bsmtp will create a correct email address (mailbox only).
836 kes Modify 'memory' command so that the buffers are listed as 'In use'
837 to avoid confusion with Orphaned buffers.
838 kes I reworked the OpenSSL include/lib flags to be handled in
839 the standard Bacula way, which should fix bug #863 concerning
840 non-standard OpenSSL libraries.
842 kes Implement Help Browser window for bat.
843 kes Fix reload bug that reset StorageId to zero.
845 kes Fix TLS #ifdefing when TLS turned off.
846 kes Ensure that when labelling a tape with Slot=0 that InChanger
848 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
850 kes Add StartTime to final uar_sel_jobid_temp query so that we can
851 add DISTINCT (required by PostgreSQL).
852 kes Implement BSOCK authenticate_director() method. Eventually will
853 authenicate all daemons.
854 kes Move several more functions into the BSOCK class.
856 kes Add code to tell the OS that we no longer need a cached
857 file that we were reading. In findlib/bfile.c. Also,
858 only cache files that we are reading. Thanks to
859 Tobias Oetiker <tobi@oetiker.ch> for the idea.
860 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
861 kes Implement script to automatically generate cats and dll .def
863 kes Update README.mingw32 to include new .def file generation.
864 kes Correct typo in UTF-8 error message as reported by:
865 jhernandez <julianhernandez@gmail.com>
866 kes Add additional sm_check() code on debug level 1.
867 kes Set default debug level to 1.
868 kes Trap SIGABRT in attempt to get traceback.
870 kes Reduce bat connect timeout from 30 to 15 seconds.
871 kes More restructuring and implementing BSOCK class in place of
873 kes Remove a few unnecessary malloc() tests in crypto code.
874 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
875 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
876 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
878 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
880 kes Fix Verify InitCatalog. The attributes were not pointing to the
881 correct saved location.
882 kes Implement message callback so that GUI is sure to get all
883 daemon messages. Currently displayed in a dialog in bat.
884 kes Ignore SIGUSR2 (Bacula timer) in bat.
885 kes Apply regress patch from bug #859 to allow regress to work
886 with Solaris compiler.
888 kes Begin adding TLS support to bat.
889 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
890 clean up lex.c and make it more readable.
892 kes Move more bnet functions into the BSOCK class.
893 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
894 kes Complete change of berrno strerror() method to bstrerror()
898 kes Cleanup incorrect email addresses in bsmtp.
899 kes Make bat display initial messages rather than discard them.
901 kes First cut of adding .mod to the run command.
902 kes Implement auto display of messages in bat.
903 kes Enhanced preferences to allow all Bacula output to be
906 kes Try to make bsmtp date routines more generic.
907 kes Fixed bug #856 autochanger documentation.
908 kes Rework bsmtp date editing for Win32. This fixes bug #854.
909 kes Add new cats entry point so Win32 builds.
911 kes Attempt to fix bsmtp date editing on OSes without %z editing.
913 kes Do better checking for the MySQL 64 bit libraries looking for both
914 .a and .so libraries.
915 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
916 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
917 kes Require the thread safe version of MySQL during configure. Thanks
918 to Andre Noll for pointing this out.
919 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
920 continuing in migration code.
921 kes Apply implementation of tray-monitor font derived from gnome-console
922 submitted by Andreas Piesk <a.piesk@gmx.net>
924 kes Eliminate important memory loss in SQLite
925 kes Fixed the batch insert MySQL thread specific data that was not
926 being freed. See cats/mysql.c:db_thread_cleanup().
927 kes Fix restore before command.
928 kes Convert old hdr.name to name() in a few places.
929 kes Implement update jobid command.
930 kes Return all time_t dates in db_get_job_record()
931 kes Stop watchdog in SD earlier.
932 kes Put Pool just after Storage in please mount message.
933 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
936 kes Update the po files.
937 kes Fix Verify InitCatalog by making it cache attributes.
939 kes Change name bacula-bat to bat for man 1 page to correspond to
941 kes Check for client and store NULL pointers in status command. This
943 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
944 kes Fix sign extended editing of %p.
945 kes Clean out a little old #ifdefing in cats/mysql.c
947 kes If time diff between DIR and FD is more than 600 seconds convert
948 INFO message to WARNING.
949 kes Implement heap size display in status for all daemons.
950 kes Attempt to fix MySQL db open memory loss (not successfull).
951 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
952 kes Eliminate memory loss in MySQL (possibly other SQLs) during
953 Query. This looks like a MySQL but but by doing extra releases,
954 the memory goes away. This should fix bug #847.
956 kes When backup fails, cancel SD before waiting for sd termination.
957 kes If SD is waiting for FD to connect during cancel, wake up the
959 kes Fix fsf code so that errno is correctly reported.
960 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
962 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
963 so that Bacula doesn't later stumble into a seg fault.
964 kes Use the term Restore Client in the restore Job report.
965 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
966 the original job's FileSetId.
967 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
968 spooling in migration jobs. Not yet tested.
969 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
970 reading conf file from a pipe. However, do it with open_bpipe()
971 rather than popen. Not yet tested.
973 kes Fix an ugly bug where the VolCatBytes were getting updated
975 kes Implement bconsole memory command that prints current memory
976 usage, plus smartalloc dump.
977 kes Clarify some error messages in backup, admin, and migrate.
978 kes Shrink label dialog to smaller size.
979 kes Invert Cancel OK buttons on restore to be OK Cancel.
980 kes More strerror() to bstrerror() conversions.
982 kes Start implementing bstrerror() in place of strerror().
983 kes Stripping path -- seems to work.
985 kes Prevent door and port files from being restored (mostly
987 kes Free an unreleased buffer in compat code.
988 kes Change console Job name from *Console* to -Console- to eliminate
989 Win32 filename problems. Put Win32 path separator when creating
990 Console file. This fixes bug #846.
991 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
993 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
995 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
996 to force Win32 error message.
998 kes First cut strip path. The data should be passed to the FD,
999 but nothing is done with it yet.
1000 kes Enhance the digest and signature routines in the crypto
1001 library to accept a JCR and to use it to print error messages
1002 so that they will go in the Job report rather than the daemon's
1004 kes Simplify some of the verify signature code.
1005 kes Simplify a few of the alternative returns in the signature
1008 ebl Use only POSIX regex instead of GNU regex in breg.c for
1009 File relocation. It fix broken freebsd compilation.
1010 kes Convert all other Dir files to use new ua class message
1012 kes Tentative fix for missing digest signature in bug 807.
1013 kes Correct handle problem in new win32_ftruncate routine.
1014 kes Convert ua_purge.c and ua_update.c to use new ua class
1015 message routines for bat.
1017 kes Correct incorrect installation of LICENSE in Win32 installer.
1018 kes Display LICENSE at the beginning of the Win32 install.
1019 kes Attempt to correct the need for the png files to be installed
1021 kes Reapply my bat.conf install script in qt-console. I think I
1022 editted bat.pro instead of bat.pro.in and it was lost.
1023 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1024 the /var/lock/subsys for subsysdir. Also corrects typos in the
1027 kes First cut update job.
1028 kes Correct configure to include qmake of src/qt-console directory.
1030 kes Make restore job yes/mod/no print in one command so GUI works.
1031 kes First cut implementing backup and restore client.
1032 kes Correct editing in Verify output that caused a seg fault.
1034 kes Insure that bat.conf is not overwritten during installation.
1035 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1036 while I was implementing migration in March 2006 !
1038 ebl Cleanup file relocation, using char *RegexWhere instead of
1039 char *where + bool where_use_regexp
1040 kes Update some manpages and add bat manpage.
1041 kes Make a first cut at converting bacula.spec.in for bwx-console
1043 kes Apply patch from John Goerzen to add hostname as fourth argument
1044 to make_catalog_backup script.
1045 kes Fix typos I introduced into bsmtp.c
1046 kes Make pm_strxxx() routines handle input of NULL pointer. This
1047 is to protect from NULL pointers returned from SQL databases.
1048 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1049 kes Add more debug to FIFO code -- fix fifo regression test.
1051 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1052 kes Add thread timer to bnet_connect() to break from OS if wait time
1055 kes Update Win32 build to include new files, new symbols, and
1057 kes Implement socket level heartbeat (tcp_keepidle)
1058 ebl Commit File relocation patch
1059 kes Make bat have 'make install' target.
1060 kes Warn during install if old gnome-console binary found.
1061 kes Warn during install if old wx-console binary found.
1062 kes Add -8 option to bsmtp command line to add content type utf-8.
1063 Fixes bug #809. (Character coding problem in bsmtp).
1064 kes If < is found in target (from, to, cc) then do not enclose the
1065 target in < > in bsmtp. Fixes bug #772 (malformed address).
1066 kes When printing certain items in dbcheck, stop after 300000.
1067 Fixes bug #822. (dbcheck loops).
1068 kes Incorrect status in Dir after waiting for mount with poll set.
1071 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1073 kes Print waiting to reserve a device every 5 mins.
1075 kes Don't call close_part in label.c if tape and relabel.
1076 kes Don't free volume if busy in close() -- should help with
1078 ebl Fix #824 RunScript bug (After script could be execute twice)
1079 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1080 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1081 Add a regression script to test RunScript
1083 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1086 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1087 deprecated. No additional bugs will be fixed, and they will be dropped
1088 in a future release (probably 2.4.0).
1089 kes Change name of wx-console to bwx-console to make it more Bacula
1091 kes Change the name of gnome-console to bgnome-console to make it
1094 kes Some time in March, a Feature Request with patch from Jorj Bauer
1095 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1097 The ability for the director to validate a Client (FD) CN against
1098 an arbitrary set of patterns rather than the hostname, with
1099 A new 'TLS Allowed CN' set of directives which are implemented
1100 in the Client resource. Then pattern matching is used in place
1101 of hostname matching against the Certificate's CN. As an example, we
1102 have certificates which (a) use a local CA, and (b) have a CN of the
1104 kes Add new/changed entry points to Win32 build
1105 kes Create unaccepted-projects for projects that are not accepted.
1106 kes Simplify locking in the reservations system.
1107 kes Add more debug code in reservations.
1108 kes Make sure error condition on reserving a volume is handled correctly.
1109 kes Correct handling of volume_in_use.
1110 kes Correct handling of initializing a device.
1111 kes Move handling of broadcasting releasing a device into release_device().
1112 kes Correct attaching dcr to dev so that it is only done if device
1113 is properly initiated.
1115 kes Locking debug level tweaks in SD.
1116 kes Tweak new Volume code.
1118 kes Add exec external-command [wait-seconds] to bconsole. This
1119 executes the external-command. Note! normally external-command
1120 should be enclosed in double quotes.
1121 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1122 it should normally be off in a production system.
1124 kes Implement die command for SD so that we can force it to dump.
1125 kes Implement SD lock debug code.
1126 kes Implement new algorithm for keeping Volume list in SD. It
1127 is now owned by the device.
1129 kes Implement new code for freeing in use volumes that should
1130 resolve if not all, some of the problems of multiple drive
1131 tape conflicts described in bug 801.
1133 kes Fix gui/bacula-web/images files in svn.
1134 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1136 ebl Fix a bug in batch mode (in string escape)
1137 kes Correct migration prune SQL typo that crept in in a
1138 recent 2.1.x change.
1140 kes Move bnet_despool() into class in bsock.c
1141 kes Modify job report to include director name and Build OS.
1142 kes Move drop root privilege and check_catalog() before fork.
1143 kes Add update database scripts (version 9 to 10) to updatedb directory.
1145 ebl Check size and age of each file after its backup to see if
1146 it has changed during backup, if 'checkfilechanges' is set.
1147 The FD will do an extra check (stat(2)) after
1148 each file backup. mtime, ctime and size are compared with
1149 'before backup' information. If time or size mismatch, an
1150 error message will be generated. You must upgrade FD to use it.
1152 kes Make database name and user configurable
1153 --with-db-name=xxx --with-db-user=xxx
1154 kes Add back database type to message.c for debugging.
1156 kes Implement dir_sql() which issues an SQL query.
1157 kes Modify bat medialist to use dir_sql() and do some minor C++
1158 formatting as well as eliminating a number of pointers, simplifing
1161 kes Fix some of the mtx-changer grep commands for tape label readers.
1162 kes Convert a number of bsendmsg into the appropriate send/warning/error
1163 message class calls.
1164 kes Suppress the using database message in the .sql command.
1165 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1167 kes Add context menu for floating a window.
1168 kes Some minor cleanup and name changes in qt-console
1169 kes Add doing mt setblk 0 in Win32 mtx-changer.
1170 kes Apply Martin's bug fix to move definition of ENODATA for
1172 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1173 sqlite2 and sqlite3.
1175 kes More pruning cleanup.
1176 kes Turn on wait_for_drive by default in mtx-changer.
1177 kes Turn on Batch insert code by default as it now passes regression.
1178 kes Add ./configure --enable-bat to enable building of Bat.
1179 No install yet though.
1181 kes Implement a new .sql command for bat.
1182 kes Implement code to turn off pruning in obtaining the next volume.
1183 Pruning is turned off for the status dir command, but turned on
1184 for SD requests and for the list nextvolume command.
1186 kes Correct Qmsg() that was not updated correctly when committing a
1187 previous change (probably the recent TLS patch).
1189 kes Write new subroutine is_volume_purged() that explicitly checks
1190 if the Volume is purged, and if so marks it as such. This should
1191 resolve problems reported about needing to mount twice to recycle
1193 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1194 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1195 amount of duplicated code.
1196 kes Do volume pruning only for the Media Type desired (reduces pruning time
1197 if multiple Media Types are in the same pool).
1198 kes Implement more detailed info in the Job report for the Bacula version
1200 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1202 ebl Add bbatch tool to bench database and insert mode.
1203 Fix sql quote stuff in batch mode
1204 Fix sql stuff for mysql
1206 kes Correct problems with am/pm scheduling. Fixes bug #808.
1207 kes Implement new prunning code that prunes up to 1000 jobs at
1208 the same time. The same technique can be applied to a number
1209 of other prune/purge subroutines.
1210 kes Add an insanity check when starting a new tape job to ensure
1211 that the tape position has not been changed. If so fail the
1213 kes Fix Win32 build for dlls to add the folllowing:
1214 src/lib/bsock.c -- new file with new entry points
1215 src/lib/dlist.c -- new entry points
1216 src/cats/sql_create.c -- new entry point
1217 src/cats/sql_cmds.c -- new DATA item exported
1219 ebl batch mode cleanup bscan-test is ok now.
1220 kes Implement SD code to check length of disk volume before appending.
1222 kes Correct return status on db_batch... routines.
1223 kes Add call to db_write_batch_file_records() to migration code.
1224 ebl Fix AfterJob timing
1225 kes Move the checking of the database in initializion of the Director
1226 to after we drop privileges. This avoids the need for both root
1227 and bacula access to the DB.
1228 kes Correct a misplaced variable definition in src/filed/backup.c
1229 kes Correct how the new batch insert db_create_attributes_record()
1230 uses the arguments. Caused a seg fault in bscan.
1231 kes Implement lock() and unlock() methods in DEVICE class.
1232 Implement block() and set_block(xx) methods in DEVICE class.
1233 kes Modify bnet_connect() so that it uses time() to check for the
1234 wait time expiring (on some OSes, some system calls may not
1235 return immediately).
1236 kes Modify Verify to obtain the previous JobId when it is actually
1237 running rather than at schedule time (as it was in 1.38.x).
1238 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1240 kes When checking pid in pid file, continue running if the pid is
1241 the same as ours. This occurs on IRIX after a system crash.
1244 kes Extend new GUI API.
1245 kes Make the ua structure a class, and implement send_msg(),
1246 error_msg(), warning_msg(), and info_msg().
1248 kes Apply fix from for building wx-console on the Mac from
1250 kes Implement new select mechanism for GUI programs.
1251 kes Reorganize initialization of stackedWidgets in bat.
1253 kes Add updated nagios plugin supplied by Christian Masopust.
1255 kes More bat implementation.
1256 kes File migrate bug with Pool Occupancy using mediaid instead
1257 of jobids. Fixes bug #795.
1258 kes Fix orphaned buffers in filed backup and verify due to
1259 crypto buffers not freed during errors. Fixes bug #789.
1260 kes Extend new GUI api code to tree commands.
1261 kes Ensure that tree and dot commands check console ACLs.
1262 kes Permit marking directory with trailing slash.
1263 kes Allow 20 console connections (instead of only 10).
1265 kes Add smartctl call to bacula-sd.conf as an example of getting
1268 kes Modify jobq.c to let simultaneous restore jobs run. This may
1269 cause them to fail if they cannot get a drive.
1270 kes Add Client Connect Wait to Storage daemon to permit users to
1271 modify the time the SD waits for a FD connection.
1273 kes Correct virtual changer check which was backwards. This caused
1274 volumes to be unloaded into slots already occupied.
1276 kes Apply Command ACL filter to JobId list in restore command.
1277 kes Correct typeo in var.c patch.
1279 kes Don't let Bacula prune File or Job records for the current Job.
1280 kes Fix variable substitution pad + inc bug reported (with patch)
1283 kes Correct SQLite log table index as reported by Luca Berra.
1285 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1287 kes Begin implementing new comm signals for API.
1288 kes Fix a few places in lib/message.c where the open fd may
1290 kes Continue implementing lib/bsock.c (real class). Make jcr,
1291 who, host, and port private. There are new methods to access
1292 them for non-class use. This required touching a number of files.
1294 kes Add LANG=C to autoconf/randpass so it works with languages other
1295 than English. Fixes bug #788.
1297 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1299 You will not be able to generate Include/Exclude list any more.
1300 It will be fixed soon.
1301 If you want to use this, you can apply
1302 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1304 kes Restore of sockets created false error messages because Bacula
1305 no longer restores sockets, but the code was still trying to
1306 set the attributes on a non-existent file. Reported by a user.
1307 ebl finish RecyclePool feature
1308 Media will takes Pool.RecyclePool
1309 when moving from Scratch to a Pool or when user will do
1310 update volume=xxx frompool
1311 To use it, add RecyclePool = aPool to your Pool resource
1314 RecyclePool = Scratch
1318 kes Expand new BSOCK class adding signal() and new BNET signals.
1319 kes Begin enhancing the dot commands adding a new API function
1320 that returns more information and will make it easier
1321 to interface to the Director from a program.
1323 kes Make DEVICE fd private. Its new name is m_fd, and can be
1324 obtained with dev->fd() outside the class. This is the
1325 first of many DEVICE members to be made private.
1326 kes Implement Michael Renner's idea on having a virtual disk
1327 changer. I made some minor modifications (e.g. I did not
1328 implement the Virtual Changer directive, but simply set
1329 the Changer Command to an empty string.
1331 kes Implement a BSOCK send() method that writes the whole record
1332 in a single write() request rather than in two.
1333 ebl add update volume=xxx recyclepool=yyyy
1334 volume takes recyclepool from pool when using update volume=xxx from pool
1336 kes Fix encryption deblocking bug, which caused some restored files
1337 to be truncated. This fixes bug #763.
1338 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1339 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1341 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1342 ebl Use btime_t instead of uint64_t in media patch.
1344 kes Optimize the use of the database a bit in the Status dir command.
1345 Only open it when needed, ensure that if any previous database
1346 was opened, it is closed.
1348 kes Correct VolCatBytes bug from media patch.
1349 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1350 in the case of orphaned records.
1351 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1352 and File records in 300K chunks to be more efficient. This
1353 idea came from Juan Luis Frances (if I remember right).
1354 kes Apply Eric's scratch patch that moves a purged Volume to
1355 the RecyclePool. Question: how is RecyclePool set? what
1356 happens to the ScratchPool?
1357 kes Apply Eric's media patch that collects read/write media
1358 times as well as byte counts. This patch requires a
1359 simultaneous upgrade of the DIR and SD. Note, there
1360 should be some way to turn off timing. I'm not sure
1361 times are in Bacula units.
1362 kes Apply Eric's batch-insert patch.
1364 kes Update projects list.
1366 kes Implement Include/Exclude file lists in FD as dlists using
1367 the new dlistString class. This permits efficiently having
1368 large include/exclude lists and completes project Item 25.
1369 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1370 console is authorized to cancel the job. This fixes bug
1372 kes Modify SD so that the VolCatJobs medium record is updated
1373 at the beginning of a Job rather than the end. This
1374 fixes bug #775 where exceeding MaxVolJobs caused jobs
1376 kes Added a mutex around getting and setting Volume information
1377 so that multiple simultaneous jobs will single thread.
1379 Switch to using Subversion
1380 kes Remove src/pygtk-console/ from configure
1382 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1383 plus the entrypoints.
1384 kes Apply patch supplied that corrects debug print
1385 in canceling jobs for max run time. Supplied as
1386 part of bug #621, which was previously fixed.
1388 kes Test on job_canceled() and sd_msg_thread_done inside
1389 loop starting the message thread to avoid a race condition.
1391 kes Remove rl_catch_signal from console.c as it conflicted
1392 with the header definition. Fixes bug #765.
1393 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1395 kes Clarify some stored/acquire messages to indicate if the
1396 problem is with read or append.
1398 kes Fix memory leak with storage ids in cats/sql_get.c
1399 kes Terminate watchdog earlier to avoid reference to released
1400 memory -- reported by Jason Austin.
1401 kes Move closing the database from jobq.c to the director daemon
1402 termination routine. This fixes memory leaks for shadow jobs
1403 (i.e. migration jobs).
1404 kes Free up the unique jobid chain items in migrate.c. This fixes
1405 a memory leak problem.
1406 kes Convert some ugly looking for statements to use foreach_alist
1407 in findlib/find.c. This will facilitate converting the structures
1408 to use dlist (for large include/exclude lists).
1409 kes Fix a bug in the btree.c and btree.h routines, then rename them
1410 rblist and add them to be built in src/lib. Include some new
1411 methods written by Rudolf Cejka that make the code more readable
1412 (hides some of the ugly casting).
1413 kes Add set_next() and set_prev() methods which make the code much more
1414 readable. Also add a new dlistString class that facilitates storing
1415 strings in dlists. To be used in the large include/exclude lists.
1416 kes Make some trivial modifications to lib/tree.h that use rblist
1417 rather than dlist for storing the tree links. This was suggested
1418 by Rudolf Cejka. The result of this is that the restore tree now
1419 uses red-black binary trees rather than simple linked lists. This
1420 should give rather dramatic speed improvements for directories
1421 contining large numbers of directories/files (more than 10000).
1423 kes Fix maxruntime bug #621.
1425 ebl Implement the include JobID in spool file name project.
1426 kes Reorder projects file in order determined by Jan 2007 vote.
1427 kes Implement item #12 on project list -- quick release of FD by
1429 kes Fix open of SQLite3 db where user does not have write permission
1430 so that DIR does not crash. Fixes bug #761.
1432 kes Add back missing @ in Win32 Makefile.
1433 kes Change 'Device not configured to autolabel' from INFO
1435 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1436 which should restart an indefinite # of times.
1437 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1438 other DIR specifications.
1440 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1441 Fix path quoting in SQLite scripts.
1442 Fix problems with SHGetFolderPath.
1444 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1446 kes Fix Job restart on error bug that promotes an Inc to a Full
1447 backup. This should fix bug #755.
1448 kes Add qt-console and first cut of code.
1452 kes Fix Bacula->Documentation link on Win32 to point to index.html
1453 instead of bacula.html. Fixed bug #750.
1454 kes Return JobId in db_get_job_record() when JobId==0. This should
1456 kes Do not release source pointers when restarting a failed job.
1458 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1459 This *should* fix bug #747.
1460 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1463 kes Modify USTORE constructor to set an empty store_source string,
1464 and don't copy the store_source string in a cancel. Hopefully
1465 this will fix Arno's seg fault, bug #744.
1466 kes Add back code to disable conio in configure. Fixes bug #743.
1467 kes Correct the Options scanner in the FD to correctly handle
1468 SHA1 option, which was eating the next option. Reported by
1470 kes Add code to indicate when the SD is spooling, spool wait, and
1471 despooling as requested by Alan Brown.
1473 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob