1 Technical notes on version 2.2
4 Beta Release Version 2.2.9-b7
6 kes Close bat console windows first to eliminate error message
8 kes Remove useless code in Scheduler that causes seg fault on
10 kes Correct some SD catalog request error messages.
11 kes Don't allow pruning of any running job.
12 kes Turn off code in read_record that causes a seg fault in the SD
13 when reading past an EOS_LABEL.
14 kes Turn off unloading the autochanger in reserve.c as it just
16 kes Lock volumes when unreserving a device.
17 kes Do not mark volume unused when recycling.
18 kes When acquiring, don't mark volume unused if it is reserved (busy).
20 Beta Release Version 2.2.9-b6
22 kes Eliminate ./configure warning on po directory
23 kes Fix bug #1063, reuse of freed ptr in list nextvol.
24 kes Release regex compile buffer in filed/job.c
25 kes Add proper type of const char in sql_create.c
26 kes Turn off debug in daemon termination routines
27 kes Move free_volume_list() before devices are freed in stored.c
28 kes Fix reference to uninitalized stack variables in bregex.c.
29 This should correct bug #1067.
31 kes Fix possible seg fault in SD when freeing a volume entry.
33 kes Apply patch from bug #1069 that corrects spurious error messages
34 when ACLs enabled on SGI but no ACL exists.
35 ebl Fix a storage deamon segfault at debug level 500.
37 Beta Release Version 2.2.9-b5 -- not released
39 Beta Release Version 2.2.9-b4
41 kes Re-enable code to remember last volume mounted on a non-tape
43 kes Add patch supplied in bug #1068 that fixes a SD crash when using
44 a Virtual autochanger.
45 kes Generate correct JobMedia records during spooling/despooling when
46 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
47 <tih@hamartun.priv.no> for excellent analysis and testing.
49 Beta release Version 2.2.9-b3
51 kes Rework certain SD locking based on gdb tracebacks of deadlocks
52 sent by Eric. This code now uses only the volume_lock() rather
53 than the reservations lock when at EOM and acquiring a new
55 kes Ensure only one exit point in several subroutines.
57 Beta release version 2.2.9-b2
59 kes Fix to initial tape drive open to release the volume name
61 Beta release Version 2.2.9-b1
63 kes Fix to JobMedia fix.
64 kes Fix bug pointed out by Peter Much that causes the StorageId to
65 be updated when reading a tape (during migration, it could have
66 been incorrectly set to the write StorageId).
68 kes Implement autostart scripts for Debian
70 kes Fix mtx-changer.in for broken Debian mt program.
72 kes Massive commit of all fixes and back ports to create 2.2.9
74 kes Apply doc fix from bug #1062.
75 kes Resolve crash and improper restore wx-console Win32 restore
77 kes Update Win32 wxWidgets to latest version.
78 kes Attempt to do correct handling of Win32 mount points. Should
80 kes Fix Win32 FD backup/restore memory leak due to improper termination
81 of BackupRead/Write. This fixes bug# 1038.
82 kes Add const to AIX prototype for initgroups()
84 kes Undo bug #1047 heap overrun fix as it is not correct.
86 kes Fix creating first JobMedia record during Migration to include
87 proper index. This caused slow restores of migrated jobs.
89 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
90 and do not strip paths on symbolic links.
91 kes Set catalog backup database and user name from values specified on
93 ebl Apply patch to correct bug #1031, about wrong pool source information
98 kes Apply patch from Martin to correct bug #1040, bscan sets existing
100 kes Fixed important spelling error in doc -- bug #1045.
102 kes Move initialization of read/write res lock earlier in the code.
103 This fixes the crash with a null conf file. This fixes bug
105 kes Redefine CURES in lib/parse_conf to be URES and move it all
106 into lib/parse_conf.c -- this responds to bug #1042, but does
107 not fix it. The fix is not to compile with FORTIFY_SOURCE.
108 kes Backport fix de-referencing a NULL pointer in the scanner from
109 the trunk SVN. I don't think this was reported as a bug.
111 Beta release Version 2.2.8
113 kes Re-enable the new job code editing (%f).
115 kes Fix bsnprintf for float point numbers. I broke recently when
116 parameterizing some variables. This fixes bug #1036.
118 kes Move Heartbeat documentation from Job to Director resource.
119 This fixes bug #1033.
121 kes Fix existing switch drive SD code to call autochanger to release
122 any old volume. This must be done to keep the autochanger from
123 releasing subsequently newly reserved volumes in doing a close().
124 This should possibly fix bugs #1032 and #1018.
125 kes Apply big backport of current SVN SD code that corrects a number
126 of race conditions. This is a first step in fixing bug #1018.
128 ebl Fixes bug #1028 where "Selection Type" option was not usable
132 Release Version 2.2.7
134 kes Partial back out (disabled) %f job code editing because it
135 does not build on Win32.
136 kes Fix seg fault Frank Sweetser reports in regression testing
137 on his systems. The problem was that the original author of
138 bsnprintf.c did not take into account the side effects of
139 using ++x in the argument to a #define.
141 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
142 that implements double quoting include names in conf files,
143 and also allows piping input by having the first character
144 be a vertical bar (|).
145 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
146 that implement %f in RunScripts to pass the FileSet name.
147 kes Skip leading | when lex input comes from a pipe as suggested
148 by Michael Stapelberg <michael@stapelberg.de>.
150 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
151 Nerijus Baliunas <nerijus@users.sourceforge.net>
153 kes This patch corrects a problem where the maximum concurrent storage
154 jobs counter gets out of sync during restore jobs causing jobs to
155 'wait on max Storage jobs'. This patch fixes bug #1009.
157 kes Add new include to postgresql.c suggested by Marc Cousins so
158 that it compiles correctly with pgre version 8.3. Also fix
159 misuse of %x with pointer (should be %p).
161 kes This patch fixes bcopy so that it produces correct Volumes.
163 kes This patch eliminates spurious output to the console during a VerifyVolume
164 job that contains encrypted data. It fixes bug #1024.
166 kes This patch prevents the 'status dir' command from trying to use a scratch
167 volume and possibly moving it from one pool to another. This patch fixes
170 kes Fix --archivedir addition to configure. Replace it with
171 --with-archivedir in configure.in This fixes the regression
173 kes This patch fixes bug #1012 where the job is canceled because
174 of Max Run Time exceeded when the job has not yet started.
176 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
177 one 'part' to write. Instead of each part being stored on disk,
178 written to DVD, then deleted from disk, all parts are written to disk,
179 and only the last is written and deleted from disk.
181 kes Correct typos in disk-changer.in
183 kes This patch fixes the status command to include the formating string for
184 JS_AttrInserting. It fixes bug #1021.
185 kes This patch should fix the Mac OS X build problem on the latest
186 Darwin, where sys/types.h was not included correctly (apparently
187 due to a change in the Mac headers). The solution was to explicitly
188 ensure that it is defined for the ./configure.
189 This patch also has a rebuild of configure that includes the Debian
190 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
191 kes This patch should ensure that queued messages to the console are
192 displayed as soon as possible. It should fix bug #1007, but has been
193 reported not to work.
195 kes This patch fixes the infinite loop when trying to increase the
196 maximum number of volumes in a Pool during the add command.
197 This patch fixes bug #1008.
199 Release Version 2.2.6
201 kes Get fix for joblist bug in bat from trunk.
203 kes This patch fixes bug #1003 where putting the message output from
204 a Verify job into the catalog results in a recursive loop. The problem
205 seems to show up only with postgresql (to be verified).
207 kes Fix bug #942 where lots of emails where generated when the heartbeat
208 interval was low and Bacula wanted a different tape from the one in
211 ebl Apply 2.2.5-lastwritten.patch to fix the LastWritten field
212 which was updated during a restore (or a reading migration) bug #982
214 ebl Use qmake-qt4 instead of qmake when available (debian system).
216 kes Add a security warning to src/cats/make_catalog_backup.in indicating
217 that passing the password via the command line (arg 3) is insecure.
218 This responds to bug #990 (it doesn't fix it).
219 kes Apply 2.2.5-postgresql-errors.patch
220 kes Remove unneeded File table index on JobId, which is already
221 present as the first index of another multi-index.
223 kes Set default debug_level to zero. This corrects bugs #991 and #993.
224 kes Fix a crash in bat when it cannot connect to the Director for example
225 if the Director is not running.
227 kes Activate Close button on tray-monitor window. This fixes
230 kes Fix spurious warning message printed when creating a volume with
231 a LabelFormat. This fixes bug #976.
233 Release Version 2.2.5
235 kes Add JobId in place of Job name in all the Jmsg() output.
236 kes Correct the APP_DESC for the Win32 storage service (remove an e).
238 kes Add new SD despooling attributes and Dir inserting attributes
239 job status codes. This fixes bug #961.
240 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
242 kes Fix doc issue. This fixes bug #963.
243 kes Fix listing performance problems in bat. Pointed out by
245 ebl Fix replace on restore. This fixes bug #969
246 kes Fix bat code that tests for Win32. This should fix bug #968
247 kes Query 5 list wrong Vol after migration. This fixes bug #960
249 kes Correct lib/Makefile.in to include enh_fnmatch.o that was removed
250 in back porting from 2.3.x
252 kes Backport almost 4000 lines of 2.3 code that fixes a number of bugs.
253 The details are included in the notes in this file.
255 kes Backport 2.3 code that fixes: it fixes incorrect or incomplete error
256 messages; it fixes a problem opening the SQLite3 database when multiple
257 simultaneous jobs were running; it fixes a bug with certain versions of
258 MySQL where batch inserts failed because of table name character case
259 (upper/lower) differences.
260 kes Fix race condition that drops final block written to volume.
261 This happens in rare cases with multiple simultaneous jobs
262 when the Volume fills. This fixes bug #964. May be related
263 to bug #935 and possibly #903.
265 kes Fix FD->SD authorization failure, which was due to spurious
266 wakeups from a pthread_cond_timedwait(). Simply check the
267 predicate before continuing. This fixes bug #953
268 dvl Add new configuration item --archivedir
269 dvl Adjust regression tests to use tmp not /tmp. This will allow
270 multiple concurrent runs of the regression tests.
272 kes Eliminate more strerror() and replace with bstrerror().
273 kes Remove BSD getopt and replace with unrestricted IBM version.
274 kes Fix Win32 build for changed calling sequences.
276 kes Fix FD->SD authorization failure, which was due to spurious
277 wakeups from a pthread_cond_timedwait(). Simply check the
278 predicate before continuing. This fixes bug #953.
279 kes Add const char where needed (more to do).
281 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
282 kes Don't overwrite error message in check_tables_version.
284 kes Unlock batch insert tables with same calls used elsewhere.
285 kes Allow starting 59 jobs a second.
286 kes Make SD session key more random.
287 kes Add retry for SQLite opening db if it fails. Probably helps
289 kes Suppress extra error messages during batch insert failure.
291 kes Put some FD auth code on dbglvl rather than fixed.
292 kes Return insert attributes error message in db msg buffer to avoid
293 false error messages. Helps fix bug #966.
294 kes Separate batch init error messages. Probably helps fix bug #966.
295 kes If Dir gets an error during inserting attributes, cancel SD.
296 This reduces unnecessary error messages.
298 ebl Cleanup batch insert code. Probably fixes bug #965.
300 kes Turn off some code when batch insert not enabled.
301 kes Edit FD name in connect error messages.
303 kes Add code to handle tray monitor separated from Win32 FD.
304 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
306 kes Fix ANSI tape labeling. This fixes bug #954.
307 kes Increase the max block size to 4MB fixes bug #957.
308 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
309 is not properly mounted (recognized) during a poll.
310 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
311 Job that has differences reports Verify OK.
312 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
314 Release Version 2.2.4
316 kes Increase size of name string when FD making connection to SD.
319 kes Add waits to multiple exit detection code to try to force pid
320 file to always be deleted.
321 kes Restore good dev.tar.gz to rescue set appropriate binary property.
323 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
324 trying to switch drives by checking for blocking before unblocking.
326 kes Cancel storage daemon in all cases where FD reports error. This
327 should fix virtually all cases of bug #920.
329 kes Fix error message that was clobbered when Dir tells SD it does not
330 have write permission on Volume. This should fix a minor point
331 in bug #942, but not the main problem.
332 kes Add code to cancel job in SD if FD connection fails. This should
334 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
335 kes Fix migration code to get correct Volume name with multiple volumes
336 by skipping |. Fixes bug #936.
337 kes Implement patch supplied by Landon to fix bug #944 where using
338 TLS with bconsole uses 99+% of the CPU.
339 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
341 kes Move patches into patches directory.
343 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
346 ebl Using 'm' in bconsole will show messages like before,
347 and not memory usage.
349 Release Version 2.2.3
350 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
353 kes Fix bug #935, and probably also bug #903 where files were not
354 restored. MediaId was not properly set in JobMedia record after
357 kes Add ./configure search in qwt-qt4 for qwt package
358 kes Apply Martin Simmons patch that should turn off the new API usage
359 when batch insert is turned off allowing building on older
362 Release Version 2.2.2
364 ebl Detect if new PosgreSQL batch insert API is present.
365 kes Correct incorrect mempool call causing Director crash.
366 sb Update spec files for 2.2.1 release
368 Release Version 2.2.1
370 kes Update POTFILES.in
371 kes Cleanup a few underquoted AC_DEFUNs in configure
372 kes Apply patch from Martin Simmons that adds a test for va_copy to
375 kes Fix bug #921 by increasing the number of tries to create a new volume
377 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
378 can be called multiple times. Implement a version for machines
379 without va_copy() that gets a big buffer.
381 kes Integrate more portable zone offset code into bsmtp.c
382 Submitted by Attila Fülöp.
384 kes Fix bad SD->FD return status reported by
385 (James Harper) <james.harper@bendigoit.com.au>
386 ebl Fix a bug in read_close_session which return random status
387 thanks to James Harper
389 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
390 and directory names during restore of single file/directories.
391 kes Add sanity checks to .sql command when string is empty. Hopefully
392 that will resolve Dirks Director crash.
394 kes Apply patch submitted by Martin Simmons that corrects a seg fault
395 in the bsmtp chat subroutine when debug is >= 10.
397 kes Fix Director crash when running bat SQL queries.
398 kes Add David's notes on Item 8: Copy pools.
400 kes Rework projects file to be current and ready for a vote.
401 kes Enhance lex scanner error message.
403 kes Tweak LICENSE file to mention BSD code.
404 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
405 if specified on the ./configure.
406 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
407 This class is intended to allow us to open a second bsock to the
408 Director while in the restore subdialog.
410 kes Fix configure to create bat Makefile before creating dependencies.
411 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
412 kes Add a tooltip to the tray monitor.
413 dvl Set the Director's PID file before dropping privs. This fixes
416 kes Update AUTHORs file
417 kes Increase the default max concurrent jobs to 20 in FD and SD to
418 correspond with the default .conf files.
419 kes Rewrite the Win32 service routines. This eliminates the 3 copies
420 some different, of the same file created by RN when porting the
422 kes Rearrange some of the Win32 directories and the placement of the files
424 kes Set DEVELOPER flag in version.h
426 ========================================================================
427 Release Version 2.2.0
429 kes Apply a second doc patch from Marc.
430 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
431 improves the tips section that discusses how to setup multiple
434 kes Update bat README file.
435 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
436 corrects a typo in the Recycle status check in db_find_next_volume().
437 This will probably fix a number of annoying problems with multiple
439 kes Modify most of dird/msgchan.c to use bsock class calls rather than
440 bnet calls -- no functionality change.
442 kes Modify the Verify output to specify if files are missing on
443 the Volume(s) or disk. Fixes confusion in bug #916.
444 kes When more than one Volume is read in a migration job, the last
445 Volume bytes reported are from the last read volume rather than
446 the last written volume. Fixed. This fixes bug #910.
447 kes Fix display of Recycle flag after update volume=foo recycle=yes.
448 It previously printed New Recyle flag is: no. This fixes bug
451 kes Correct seg fault when switching tape drives during restore.
452 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
453 be used until after 2.2.0 release.
455 kes Remove fnmatch() in SD that permitted wild card specifications.
458 kes Fix %g in filename returned by SQL for browse tree reported by
460 kes Fix configure so that it puts config.out in the cwd rather than
462 kes Attempt to fix the locking problem reported by Eric in bug #906.
463 kes Make berrno class to leave errno unchanged after constructor call.
464 kes Make bnet_server use the heap rather than the stack to allocate
465 its socket fd pointers to avoid a crash at termination. Problem
466 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
468 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
469 and putting it in depkgs-qt along with Qt4.3.
471 kes Rework code in acquire.c that switches drives for reading when
472 the Media Type does not match. This should fix bug #906
474 ebl Fix a director segfault during job setup #907
475 kes Correct seg fault in postgresql when first operation returns no
476 rows. Fixes Dirks File browser problem seg fault with bat.
478 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
479 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
482 kes Implement PopUp YES/NO dialog for bat.
484 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
486 kes Correct RunScript to terminate job in FD on failure.
487 kes Change abort_on_error and AbortJobOnError to fail_on_error
488 and FailJobOnError in RunScripts.
489 kes Minor tweaks of code formating in RunScripts, principally to
490 avoid depassing 80 columns.
492 kes Eliminate one #ifdef Win32 in bsmtp
493 kes Implement grow tool to grow a file for testing very large databases.
494 kes Add big-vol-test to test Bacula seeking with > 5GB.
497 kes Modify find_next_volume() to return all values in Media record.
498 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
502 kes Update Release notes
504 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
505 Warning, in previous beta version, all media get from scratch keep their
508 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
509 This should fix bug #842. Made a note to look at removing the temp
510 files at the end of the install.
511 kes Add ability to mount and unmount a file device providing it is
512 marked as being removable and has the appropriate mount and unmount
513 commands defined in the Device resource. This fixes bug #830.
514 kes When applying a storage override, release all previous storage
515 definitions rather than just prepending the new storage.
516 This should prevent a good deal of confusion.
518 kes Implement ./configure search for qwt libraries.
520 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
521 Win32 FD. This should fix bug #893.
522 kes Remove an unnecessary beep in Win32 init code.
523 kes Update copyright dates in Win32 executable about boxes.
524 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
525 code with a BSD getopt.c and getopt.h.
526 kes Remove sched.h from the Win32 compat directory -- not used.
527 kes Remove the Exit menu item from the Win32 tray monitor. If you really
528 need to shut it down, do it through the services panel or the command
530 kes Remove some inappropriate Bacula FSFE copyrights.
531 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
532 kes Fix regress config non-portable test as pointed out by
533 Florian Heigl <florian.heigl@gmail.com>
534 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
535 as pointed out by Florian Heigl <florian.heigl@gmail.com>
537 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
538 Reported by Frank Sweetser.
542 kes Fix client-only build.
543 kes Integrate client-only fixes for bsys (initgroups) and conio from
544 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
545 kes Make arguments to get_scratch_volume() in same order as other
547 kes Rework the prune_volumes() subroutine so that after purging and
548 no volume found in desired pool, it will check for a scratch
549 volume. This prevents recycling the whole scratch pool.
550 kes Add code to status storage to print boffset_t (largefile support).
552 kes Move qwt (Graphics libarary for Qt4) to depkgs.
553 kes You now need a --with-qwt=<dir> to be able to build bat.
554 kes Update src/win32/cats/bacula_cats.def to include the new
555 db_get_query_dbids() call on Win32.
557 kes Correct a problem when selecting a scratch volume and moving
558 it to another pool that lost some columns.
559 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
560 kes Enhance Autochanger error messages to include Volume and device name.
561 kes Rework prune_volumes() code to take account of InChanger flag,
562 and to handle recycling volumes going to the Scratch pool and
563 current pool because the RecyclePool directive.
564 kes Implement a better and more efficient db_get_query_dbids() to
565 handle creating and passing back a list of DBIds.
569 kes Start work on new more efficient DBId subroutine. First use
570 will be for recycling volume to Scratch inchanger.
571 kes Increase number of JobIds in pruning from 1000 to 10000.
572 This to be replaced by above routine.
573 kes Begin implementation of building Qt4 on Win32.
574 kes Correct typo in fix I added for bad TLS shutdown.
575 kes Pull 2.0.3 patches into patches directory.
576 kes Update Release notes. Include qt-console in line count.
577 kes Update Projects file.
579 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
580 bug in migration code where a job that spanned two volumes
583 kes Implement new BST_DESPOOLING blocked state. Change from locking
584 during despooling in SD to blocking. This means that other threads
585 can work with the device structure, in particular the reservations
586 system while despooling.
588 kes Fix return in reservation message queue that missed clearing
589 the jcr lock (implemented 26Jun07 below).
590 kes Rename a number of dev methods to make locking function names
592 kes Document locking in lock.c. Move lock structures to new file
595 kes Move reservations message lock to lock jcr only this
597 kes Move main SD locking code into lock.c (new file).
598 kes Update Win32 build to include lock.c
602 kes Dirk committed the qwt library code for drawing graphs in bat.
603 kes Tweak install of qwt so that it is integrated with ./configure.
605 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
606 out by Eric (my typo).
607 ebl Fix configure.in to get batch mode enable
608 kes Return correct string from authenticate.cpp in bat when connecting
610 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
611 spurious line drops when using TLS.
612 kes Do not file reparse points when restoring a file that already
615 kes Implement Windows reparse points -- similar to directories, but
616 we do not descend into it. This is a first cut. They seem to
617 be backed up, but restore is not yet tested.
618 kes Remove restore_blocking in tls code when shutting a socket to leave
619 it in blocking mode. Hopefully this will fix the encryption bug
620 reported by Frank Sweetser.
621 kes When opening a file for backup, tell the OS that we are going to
622 read it sequentially -- optimization.
623 kes Change variable names in authenticate_director() to not conflict
624 with member names in bat. Caused great confusion with compiler,
627 kes Queue openssl error messages in case of comm problem.
628 kes Do shutdown() call if socket terminated.
629 kes Remove some duplicated code in tls.c
630 kes Move more of the bsock member variables into private and access
632 kes Add Frank Sweetser's tls-test to the regression suite.
634 kes Add Swedish sv.po file
636 kes Don't print clock skew message in FD if less than 3 seconds diff.
637 kes Add a bit of VSS info to status client.
638 kes Implement a first cut of Vista VSS, using Win2003 code.
642 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
643 loaded tape but uses first drive).
644 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
645 This was indeed a Win32 issue.
647 kes Simplify search of autochanger for in-use Volume.
648 kes Fix exit condition of check for in-use volume. kes Remove
649 inappropriate my_postgresql_free_result() in db_close()
651 kes Fix bad return in FD when encryption signature not found.
652 Probably caused a crash.
653 kes Inhibit missing encryption signature error messages for
654 file types where no signature computed.
655 kes Correct inverted check on autochanger in reservation system.
656 kes Tweak debug code in autochanger reservation.
658 kes Add some additional locking in the cats directory in subroutines
659 that modify packet variables called from batch insert.
660 kes Rework how dcrs are allocated. new_dcr() can now be called
661 with an existing pointer, and it will simply clean it up.
662 This allows the reservation system to test various different
663 devices, and will permit easy device changes.
664 kes A bunch of changes all over to handle new new_dcr() calling
666 kes Work more on the Volume management in the SD. Remember Volumes
667 for tape drives and for autochangers (even virtual disk changers).
668 kes When looking at the Volume list to reserve a drive, handle
669 autochanger names correctly by interating through the changer
670 devices. Also call the Director to see if a Volume is suitable
672 kes Fix some bugs in bscan. Make sure all media records are written.
673 Make sure that valid JobMedia records are written for disk files.
674 Previously they were completely wrong.
675 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
676 that the URLs don't change and so that the developers will all
677 work off the same copy. Rebuild from scrach.
678 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
682 kes Fix seg fault in FD from incorrect digest size.
683 kes Fix argument to non-OpenSSL crypto.c subroutine.
687 kes Remove a few malloc()s from the encryption code.
688 kes Use the class calls to bsock in filed/backup.c and restore.c in
689 place of the old bnet_xxx code.
690 kes Implement code that does an on the fly calculation of the
691 signing digest during restore of encrypted files. It makes
692 a best guess at the algorithm, and if it is not correct, will
693 then revert to the old code which reads the file after it is
695 kes Implement at least one missing crypto stream in stream_to_ascii()
696 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
697 #877 where a reload with bad syntax causes Dir to exit.
699 Cut: 2.1.14 beta (not released)
701 kes Do not free a volume on a tape drive until another volume is
702 mounted and read, or the autochanger unloads the volume.
703 This should help the SD re-use volumes that are already mounted,
704 and should fix bug #886.
705 kes Apply patch from user brettedgar that allows gnome2-console include
706 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
707 kes Apply patch from Lucien Weller that fixes day of week calculation
708 because of DST flag problem. Fixes bug #887.
710 kes Move find_next_appendable_volume() to after acquiring a valid device
711 in reserve.c. This fixes bug #864 -- confirmed by reporter.
713 kes Unable to reproduce bug 872. However added additional testing for
715 kes Bug #874 resolved by documenting SQLite limitations.
716 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
717 kes Bug #881 resolved by removing typo in mtx-changer script.
718 kes Made Frank Sweetser's wiki the official Bacula wiki with his
719 approval. Added a link to the wiki on the web page, and implemented
720 a backup from http://paramount.ind.wpi.edu
722 kes Fix update allfrompool to pass pool name.
724 kes Convert to pure GPL v2 license.
725 kes Fix sscanf problems reported by Peter Buschman that caused
726 a bus error on Solaris.
727 kes Rework (simplify) the select prompt in bat.
728 kes Move get_jobid_from_tid() into lib and create a
730 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
731 should definitely fix the problem of lost error messages in the
733 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
734 kes Eliminate tcpd.h from the project. Enclose the #include from the
735 library with extern C ...
736 kes Add print of signal name when a signal is trapped.
740 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
742 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
743 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
744 makes SQLit3 run 30 times faster, though a bit less safe.
745 kes Implement --with-batch-insert in configure and detection of thread
746 safe libraries. It is on by default, but turned off if no thread
747 safe library (e.g. SQLite 2) is available.
749 kes Fix Bacula PostgreSQL buffer overruns.
750 kes Do better checking for NULL results returned from PostgreSQL;
751 implement retry for failed queries; clear results buffer after
752 failed query. Hopefully this will correct the PostgreSQL failures.
754 kes Implement algorithm to handle only one appendable volume with
755 Prefer Mounted Volumes = no.
756 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
757 returned from a query.
758 kes Make volume lock recursive.
759 kes Implement an additional volume reservation algorithm that
760 starts by considering all reserved volumes then uses the
761 old brute force algorithm of searching the resources to
762 find a suitable device.
763 kes Add new reservations debug code and refine the old code.
764 kes Update the win32/dll/bacula.defs file.
766 kes Tweak reservations algorithm to permit a few more cases, i.e.
767 volume reserved, but on different drive, ...
768 kes Enhance SD status to include Pool and Media Type for drive in a
769 more readable format (a bit longer).
770 kes Fix PostgreSQL double free.
772 kes Minor refactoring of restore decryption code.
773 kes Add code to smartall.c to detect double free of a buffer.
775 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
776 so that bsmtp will create a correct email address (mailbox only).
777 kes Modify 'memory' command so that the buffers are listed as 'In use'
778 to avoid confusion with Orphaned buffers.
779 kes I reworked the OpenSSL include/lib flags to be handled in
780 the standard Bacula way, which should fix bug #863 concerning
781 non-standard OpenSSL libraries.
783 kes Implement Help Browser window for bat.
784 kes Fix reload bug that reset StorageId to zero.
786 kes Fix TLS #ifdefing when TLS turned off.
787 kes Ensure that when labelling a tape with Slot=0 that InChanger
789 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
791 kes Add StartTime to final uar_sel_jobid_temp query so that we can
792 add DISTINCT (required by PostgreSQL).
793 kes Implement BSOCK authenticate_director() method. Eventually will
794 authenicate all daemons.
795 kes Move several more functions into the BSOCK class.
797 kes Add code to tell the OS that we no longer need a cached
798 file that we were reading. In findlib/bfile.c. Also,
799 only cache files that we are reading. Thanks to
800 Tobias Oetiker <tobi@oetiker.ch> for the idea.
801 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
802 kes Implement script to automatically generate cats and dll .def
804 kes Update README.mingw32 to include new .def file generation.
805 kes Correct typo in UTF-8 error message as reported by:
806 jhernandez <julianhernandez@gmail.com>
807 kes Add additional sm_check() code on debug level 1.
808 kes Set default debug level to 1.
809 kes Trap SIGABRT in attempt to get traceback.
811 kes Reduce bat connect timeout from 30 to 15 seconds.
812 kes More restructuring and implementing BSOCK class in place of
814 kes Remove a few unnecessary malloc() tests in crypto code.
815 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
816 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
817 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
819 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
821 kes Fix Verify InitCatalog. The attributes were not pointing to the
822 correct saved location.
823 kes Implement message callback so that GUI is sure to get all
824 daemon messages. Currently displayed in a dialog in bat.
825 kes Ignore SIGUSR2 (Bacula timer) in bat.
826 kes Apply regress patch from bug #859 to allow regress to work
827 with Solaris compiler.
829 kes Begin adding TLS support to bat.
830 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
831 clean up lex.c and make it more readable.
833 kes Move more bnet functions into the BSOCK class.
834 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
835 kes Complete change of berrno strerror() method to bstrerror()
839 kes Cleanup incorrect email addresses in bsmtp.
840 kes Make bat display initial messages rather than discard them.
842 kes First cut of adding .mod to the run command.
843 kes Implement auto display of messages in bat.
844 kes Enhanced preferences to allow all Bacula output to be
847 kes Try to make bsmtp date routines more generic.
848 kes Fixed bug #856 autochanger documentation.
849 kes Rework bsmtp date editing for Win32. This fixes bug #854.
850 kes Add new cats entry point so Win32 builds.
852 kes Attempt to fix bsmtp date editing on OSes without %z editing.
854 kes Do better checking for the MySQL 64 bit libraries looking for both
855 .a and .so libraries.
856 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
857 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
858 kes Require the thread safe version of MySQL during configure. Thanks
859 to Andre Noll for pointing this out.
860 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
861 continuing in migration code.
862 kes Apply implementation of tray-monitor font derived from gnome-console
863 submitted by Andreas Piesk <a.piesk@gmx.net>
865 kes Eliminate important memory loss in SQLite
866 kes Fixed the batch insert MySQL thread specific data that was not
867 being freed. See cats/mysql.c:db_thread_cleanup().
868 kes Fix restore before command.
869 kes Convert old hdr.name to name() in a few places.
870 kes Implement update jobid command.
871 kes Return all time_t dates in db_get_job_record()
872 kes Stop watchdog in SD earlier.
873 kes Put Pool just after Storage in please mount message.
874 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
877 kes Update the po files.
878 kes Fix Verify InitCatalog by making it cache attributes.
880 kes Change name bacula-bat to bat for man 1 page to correspond to
882 kes Check for client and store NULL pointers in status command. This
884 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
885 kes Fix sign extended editing of %p.
886 kes Clean out a little old #ifdefing in cats/mysql.c
888 kes If time diff between DIR and FD is more than 600 seconds convert
889 INFO message to WARNING.
890 kes Implement heap size display in status for all daemons.
891 kes Attempt to fix MySQL db open memory loss (not successfull).
892 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
893 kes Eliminate memory loss in MySQL (possibly other SQLs) during
894 Query. This looks like a MySQL but but by doing extra releases,
895 the memory goes away. This should fix bug #847.
897 kes When backup fails, cancel SD before waiting for sd termination.
898 kes If SD is waiting for FD to connect during cancel, wake up the
900 kes Fix fsf code so that errno is correctly reported.
901 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
903 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
904 so that Bacula doesn't later stumble into a seg fault.
905 kes Use the term Restore Client in the restore Job report.
906 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
907 the original job's FileSetId.
908 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
909 spooling in migration jobs. Not yet tested.
910 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
911 reading conf file from a pipe. However, do it with open_bpipe()
912 rather than popen. Not yet tested.
914 kes Fix an ugly bug where the VolCatBytes were getting updated
916 kes Implement bconsole memory command that prints current memory
917 usage, plus smartalloc dump.
918 kes Clarify some error messages in backup, admin, and migrate.
919 kes Shrink label dialog to smaller size.
920 kes Invert Cancel OK buttons on restore to be OK Cancel.
921 kes More strerror() to bstrerror() conversions.
923 kes Start implementing bstrerror() in place of strerror().
924 kes Stripping path -- seems to work.
926 kes Prevent door and port files from being restored (mostly
928 kes Free an unreleased buffer in compat code.
929 kes Change console Job name from *Console* to -Console- to eliminate
930 Win32 filename problems. Put Win32 path separator when creating
931 Console file. This fixes bug #846.
932 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
934 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
936 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
937 to force Win32 error message.
939 kes First cut strip path. The data should be passed to the FD,
940 but nothing is done with it yet.
941 kes Enhance the digest and signature routines in the crypto
942 library to accept a JCR and to use it to print error messages
943 so that they will go in the Job report rather than the daemon's
945 kes Simplify some of the verify signature code.
946 kes Simplify a few of the alternative returns in the signature
949 ebl Use only POSIX regex instead of GNU regex in breg.c for
950 File relocation. It fix broken freebsd compilation.
951 kes Convert all other Dir files to use new ua class message
953 kes Tentative fix for missing digest signature in bug 807.
954 kes Correct handle problem in new win32_ftruncate routine.
955 kes Convert ua_purge.c and ua_update.c to use new ua class
956 message routines for bat.
958 kes Correct incorrect installation of LICENSE in Win32 installer.
959 kes Display LICENSE at the beginning of the Win32 install.
960 kes Attempt to correct the need for the png files to be installed
962 kes Reapply my bat.conf install script in qt-console. I think I
963 editted bat.pro instead of bat.pro.in and it was lost.
964 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
965 the /var/lock/subsys for subsysdir. Also corrects typos in the
968 kes First cut update job.
969 kes Correct configure to include qmake of src/qt-console directory.
971 kes Make restore job yes/mod/no print in one command so GUI works.
972 kes First cut implementing backup and restore client.
973 kes Correct editing in Verify output that caused a seg fault.
975 kes Insure that bat.conf is not overwritten during installation.
976 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
977 while I was implementing migration in March 2006 !
979 ebl Cleanup file relocation, using char *RegexWhere instead of
980 char *where + bool where_use_regexp
981 kes Update some manpages and add bat manpage.
982 kes Make a first cut at converting bacula.spec.in for bwx-console
984 kes Apply patch from John Goerzen to add hostname as fourth argument
985 to make_catalog_backup script.
986 kes Fix typos I introduced into bsmtp.c
987 kes Make pm_strxxx() routines handle input of NULL pointer. This
988 is to protect from NULL pointers returned from SQL databases.
989 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
990 kes Add more debug to FIFO code -- fix fifo regression test.
992 kes Implement posix_fadvise in FD, and for reading spool files in SD.
993 kes Add thread timer to bnet_connect() to break from OS if wait time
996 kes Update Win32 build to include new files, new symbols, and
998 kes Implement socket level heartbeat (tcp_keepidle)
999 ebl Commit File relocation patch
1000 kes Make bat have 'make install' target.
1001 kes Warn during install if old gnome-console binary found.
1002 kes Warn during install if old wx-console binary found.
1003 kes Add -8 option to bsmtp command line to add content type utf-8.
1004 Fixes bug #809. (Character coding problem in bsmtp).
1005 kes If < is found in target (from, to, cc) then do not enclose the
1006 target in < > in bsmtp. Fixes bug #772 (malformed address).
1007 kes When printing certain items in dbcheck, stop after 300000.
1008 Fixes bug #822. (dbcheck loops).
1009 kes Incorrect status in Dir after waiting for mount with poll set.
1012 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1014 kes Print waiting to reserve a device every 5 mins.
1016 kes Don't call close_part in label.c if tape and relabel.
1017 kes Don't free volume if busy in close() -- should help with
1019 ebl Fix #824 RunScript bug (After script could be execute twice)
1020 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1021 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1022 Add a regression script to test RunScript
1024 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1027 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1028 deprecated. No additional bugs will be fixed, and they will be dropped
1029 in a future release (probably 2.4.0).
1030 kes Change name of wx-console to bwx-console to make it more Bacula
1032 kes Change the name of gnome-console to bgnome-console to make it
1035 kes Some time in March, a Feature Request with patch from Jorj Bauer
1036 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1038 The ability for the director to validate a Client (FD) CN against
1039 an arbitrary set of patterns rather than the hostname, with
1040 A new 'TLS Allowed CN' set of directives which are implemented
1041 in the Client resource. Then pattern matching is used in place
1042 of hostname matching against the Certificate's CN. As an example, we
1043 have certificates which (a) use a local CA, and (b) have a CN of the
1045 kes Add new/changed entry points to Win32 build
1046 kes Create unaccepted-projects for projects that are not accepted.
1047 kes Simplify locking in the reservations system.
1048 kes Add more debug code in reservations.
1049 kes Make sure error condition on reserving a volume is handled correctly.
1050 kes Correct handling of volume_in_use.
1051 kes Correct handling of initializing a device.
1052 kes Move handling of broadcasting releasing a device into release_device().
1053 kes Correct attaching dcr to dev so that it is only done if device
1054 is properly initiated.
1056 kes Locking debug level tweaks in SD.
1057 kes Tweak new Volume code.
1059 kes Add exec external-command [wait-seconds] to bconsole. This
1060 executes the external-command. Note! normally external-command
1061 should be enclosed in double quotes.
1062 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1063 it should normally be off in a production system.
1065 kes Implement die command for SD so that we can force it to dump.
1066 kes Implement SD lock debug code.
1067 kes Implement new algorithm for keeping Volume list in SD. It
1068 is now owned by the device.
1070 kes Implement new code for freeing in use volumes that should
1071 resolve if not all, some of the problems of multiple drive
1072 tape conflicts described in bug 801.
1074 kes Fix gui/bacula-web/images files in svn.
1075 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1077 ebl Fix a bug in batch mode (in string escape)
1078 kes Correct migration prune SQL typo that crept in in a
1079 recent 2.1.x change.
1081 kes Move bnet_despool() into class in bsock.c
1082 kes Modify job report to include director name and Build OS.
1083 kes Move drop root privilege and check_catalog() before fork.
1084 kes Add update database scripts (version 9 to 10) to updatedb directory.
1086 ebl Check size and age of each file after its backup to see if
1087 it has changed during backup, if 'checkfilechanges' is set.
1088 The FD will do an extra check (stat(2)) after
1089 each file backup. mtime, ctime and size are compared with
1090 'before backup' information. If time or size mismatch, an
1091 error message will be generated. You must upgrade FD to use it.
1093 kes Make database name and user configurable
1094 --with-db-name=xxx --with-db-user=xxx
1095 kes Add back database type to message.c for debugging.
1097 kes Implement dir_sql() which issues an SQL query.
1098 kes Modify bat medialist to use dir_sql() and do some minor C++
1099 formatting as well as eliminating a number of pointers, simplifing
1102 kes Fix some of the mtx-changer grep commands for tape label readers.
1103 kes Convert a number of bsendmsg into the appropriate send/warning/error
1104 message class calls.
1105 kes Suppress the using database message in the .sql command.
1106 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1108 kes Add context menu for floating a window.
1109 kes Some minor cleanup and name changes in qt-console
1110 kes Add doing mt setblk 0 in Win32 mtx-changer.
1111 kes Apply Martin's bug fix to move definition of ENODATA for
1113 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1114 sqlite2 and sqlite3.
1116 kes More pruning cleanup.
1117 kes Turn on wait_for_drive by default in mtx-changer.
1118 kes Turn on Batch insert code by default as it now passes regression.
1119 kes Add ./configure --enable-bat to enable building of Bat.
1120 No install yet though.
1122 kes Implement a new .sql command for bat.
1123 kes Implement code to turn off pruning in obtaining the next volume.
1124 Pruning is turned off for the status dir command, but turned on
1125 for SD requests and for the list nextvolume command.
1127 kes Correct Qmsg() that was not updated correctly when committing a
1128 previous change (probably the recent TLS patch).
1130 kes Write new subroutine is_volume_purged() that explicitly checks
1131 if the Volume is purged, and if so marks it as such. This should
1132 resolve problems reported about needing to mount twice to recycle
1134 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1135 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1136 amount of duplicated code.
1137 kes Do volume pruning only for the Media Type desired (reduces pruning time
1138 if multiple Media Types are in the same pool).
1139 kes Implement more detailed info in the Job report for the Bacula version
1141 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1143 ebl Add bbatch tool to bench database and insert mode.
1144 Fix sql quote stuff in batch mode
1145 Fix sql stuff for mysql
1147 kes Correct problems with am/pm scheduling. Fixes bug #808.
1148 kes Implement new prunning code that prunes up to 1000 jobs at
1149 the same time. The same technique can be applied to a number
1150 of other prune/purge subroutines.
1151 kes Add an insanity check when starting a new tape job to ensure
1152 that the tape position has not been changed. If so fail the
1154 kes Fix Win32 build for dlls to add the folllowing:
1155 src/lib/bsock.c -- new file with new entry points
1156 src/lib/dlist.c -- new entry points
1157 src/cats/sql_create.c -- new entry point
1158 src/cats/sql_cmds.c -- new DATA item exported
1160 ebl batch mode cleanup bscan-test is ok now.
1161 kes Implement SD code to check length of disk volume before appending.
1163 kes Correct return status on db_batch... routines.
1164 kes Add call to db_write_batch_file_records() to migration code.
1165 ebl Fix AfterJob timing
1166 kes Move the checking of the database in initializion of the Director
1167 to after we drop privileges. This avoids the need for both root
1168 and bacula access to the DB.
1169 kes Correct a misplaced variable definition in src/filed/backup.c
1170 kes Correct how the new batch insert db_create_attributes_record()
1171 uses the arguments. Caused a seg fault in bscan.
1172 kes Implement lock() and unlock() methods in DEVICE class.
1173 Implement block() and set_block(xx) methods in DEVICE class.
1174 kes Modify bnet_connect() so that it uses time() to check for the
1175 wait time expiring (on some OSes, some system calls may not
1176 return immediately).
1177 kes Modify Verify to obtain the previous JobId when it is actually
1178 running rather than at schedule time (as it was in 1.38.x).
1179 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1181 kes When checking pid in pid file, continue running if the pid is
1182 the same as ours. This occurs on IRIX after a system crash.
1185 kes Extend new GUI API.
1186 kes Make the ua structure a class, and implement send_msg(),
1187 error_msg(), warning_msg(), and info_msg().
1189 kes Apply fix from for building wx-console on the Mac from
1191 kes Implement new select mechanism for GUI programs.
1192 kes Reorganize initialization of stackedWidgets in bat.
1194 kes Add updated nagios plugin supplied by Christian Masopust.
1196 kes More bat implementation.
1197 kes File migrate bug with Pool Occupancy using mediaid instead
1198 of jobids. Fixes bug #795.
1199 kes Fix orphaned buffers in filed backup and verify due to
1200 crypto buffers not freed during errors. Fixes bug #789.
1201 kes Extend new GUI api code to tree commands.
1202 kes Ensure that tree and dot commands check console ACLs.
1203 kes Permit marking directory with trailing slash.
1204 kes Allow 20 console connections (instead of only 10).
1206 kes Add smartctl call to bacula-sd.conf as an example of getting
1209 kes Modify jobq.c to let simultaneous restore jobs run. This may
1210 cause them to fail if they cannot get a drive.
1211 kes Add Client Connect Wait to Storage daemon to permit users to
1212 modify the time the SD waits for a FD connection.
1214 kes Correct virtual changer check which was backwards. This caused
1215 volumes to be unloaded into slots already occupied.
1217 kes Apply Command ACL filter to JobId list in restore command.
1218 kes Correct typeo in var.c patch.
1220 kes Don't let Bacula prune File or Job records for the current Job.
1221 kes Fix variable substitution pad + inc bug reported (with patch)
1224 kes Correct SQLite log table index as reported by Luca Berra.
1226 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1228 kes Begin implementing new comm signals for API.
1229 kes Fix a few places in lib/message.c where the open fd may
1231 kes Continue implementing lib/bsock.c (real class). Make jcr,
1232 who, host, and port private. There are new methods to access
1233 them for non-class use. This required touching a number of files.
1235 kes Add LANG=C to autoconf/randpass so it works with languages other
1236 than English. Fixes bug #788.
1238 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1240 You will not be able to generate Include/Exclude list any more.
1241 It will be fixed soon.
1242 If you want to use this, you can apply
1243 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1245 kes Restore of sockets created false error messages because Bacula
1246 no longer restores sockets, but the code was still trying to
1247 set the attributes on a non-existent file. Reported by a user.
1248 ebl finish RecyclePool feature
1249 Media will takes Pool.RecyclePool
1250 when moving from Scratch to a Pool or when user will do
1251 update volume=xxx frompool
1252 To use it, add RecyclePool = aPool to your Pool resource
1255 RecyclePool = Scratch
1259 kes Expand new BSOCK class adding signal() and new BNET signals.
1260 kes Begin enhancing the dot commands adding a new API function
1261 that returns more information and will make it easier
1262 to interface to the Director from a program.
1264 kes Make DEVICE fd private. Its new name is m_fd, and can be
1265 obtained with dev->fd() outside the class. This is the
1266 first of many DEVICE members to be made private.
1267 kes Implement Michael Renner's idea on having a virtual disk
1268 changer. I made some minor modifications (e.g. I did not
1269 implement the Virtual Changer directive, but simply set
1270 the Changer Command to an empty string.
1272 kes Implement a BSOCK send() method that writes the whole record
1273 in a single write() request rather than in two.
1274 ebl add update volume=xxx recyclepool=yyyy
1275 volume takes recyclepool from pool when using update volume=xxx from pool
1277 kes Fix encryption deblocking bug, which caused some restored files
1278 to be truncated. This fixes bug #763.
1279 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1280 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1282 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1283 ebl Use btime_t instead of uint64_t in media patch.
1285 kes Optimize the use of the database a bit in the Status dir command.
1286 Only open it when needed, ensure that if any previous database
1287 was opened, it is closed.
1289 kes Correct VolCatBytes bug from media patch.
1290 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1291 in the case of orphaned records.
1292 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1293 and File records in 300K chunks to be more efficient. This
1294 idea came from Juan Luis Frances (if I remember right).
1295 kes Apply Eric's scratch patch that moves a purged Volume to
1296 the RecyclePool. Question: how is RecyclePool set? what
1297 happens to the ScratchPool?
1298 kes Apply Eric's media patch that collects read/write media
1299 times as well as byte counts. This patch requires a
1300 simultaneous upgrade of the DIR and SD. Note, there
1301 should be some way to turn off timing. I'm not sure
1302 times are in Bacula units.
1303 kes Apply Eric's batch-insert patch.
1305 kes Update projects list.
1307 kes Implement Include/Exclude file lists in FD as dlists using
1308 the new dlistString class. This permits efficiently having
1309 large include/exclude lists and completes project Item 25.
1310 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1311 console is authorized to cancel the job. This fixes bug
1313 kes Modify SD so that the VolCatJobs medium record is updated
1314 at the beginning of a Job rather than the end. This
1315 fixes bug #775 where exceeding MaxVolJobs caused jobs
1317 kes Added a mutex around getting and setting Volume information
1318 so that multiple simultaneous jobs will single thread.
1320 Switch to using Subversion
1321 kes Remove src/pygtk-console/ from configure
1323 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1324 plus the entrypoints.
1325 kes Apply patch supplied that corrects debug print
1326 in canceling jobs for max run time. Supplied as
1327 part of bug #621, which was previously fixed.
1329 kes Test on job_canceled() and sd_msg_thread_done inside
1330 loop starting the message thread to avoid a race condition.
1332 kes Remove rl_catch_signal from console.c as it conflicted
1333 with the header definition. Fixes bug #765.
1334 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1336 kes Clarify some stored/acquire messages to indicate if the
1337 problem is with read or append.
1339 kes Fix memory leak with storage ids in cats/sql_get.c
1340 kes Terminate watchdog earlier to avoid reference to released
1341 memory -- reported by Jason Austin.
1342 kes Move closing the database from jobq.c to the director daemon
1343 termination routine. This fixes memory leaks for shadow jobs
1344 (i.e. migration jobs).
1345 kes Free up the unique jobid chain items in migrate.c. This fixes
1346 a memory leak problem.
1347 kes Convert some ugly looking for statements to use foreach_alist
1348 in findlib/find.c. This will facilitate converting the structures
1349 to use dlist (for large include/exclude lists).
1350 kes Fix a bug in the btree.c and btree.h routines, then rename them
1351 rblist and add them to be built in src/lib. Include some new
1352 methods written by Rudolf Cejka that make the code more readable
1353 (hides some of the ugly casting).
1354 kes Add set_next() and set_prev() methods which make the code much more
1355 readable. Also add a new dlistString class that facilitates storing
1356 strings in dlists. To be used in the large include/exclude lists.
1357 kes Make some trivial modifications to lib/tree.h that use rblist
1358 rather than dlist for storing the tree links. This was suggested
1359 by Rudolf Cejka. The result of this is that the restore tree now
1360 uses red-black binary trees rather than simple linked lists. This
1361 should give rather dramatic speed improvements for directories
1362 contining large numbers of directories/files (more than 10000).
1364 kes Fix maxruntime bug #621.
1366 ebl Implement the include JobID in spool file name project.
1367 kes Reorder projects file in order determined by Jan 2007 vote.
1368 kes Implement item #12 on project list -- quick release of FD by
1370 kes Fix open of SQLite3 db where user does not have write permission
1371 so that DIR does not crash. Fixes bug #761.
1373 kes Add back missing @ in Win32 Makefile.
1374 kes Change 'Device not configured to autolabel' from INFO
1376 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1377 which should restart an indefinite # of times.
1378 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1379 other DIR specifications.
1381 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1382 Fix path quoting in SQLite scripts.
1383 Fix problems with SHGetFolderPath.
1385 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1387 kes Fix Job restart on error bug that promotes an Inc to a Full
1388 backup. This should fix bug #755.
1389 kes Add qt-console and first cut of code.
1393 kes Fix Bacula->Documentation link on Win32 to point to index.html
1394 instead of bacula.html. Fixed bug #750.
1395 kes Return JobId in db_get_job_record() when JobId==0. This should
1397 kes Do not release source pointers when restarting a failed job.
1399 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1400 This *should* fix bug #747.
1401 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1404 kes Modify USTORE constructor to set an empty store_source string,
1405 and don't copy the store_source string in a cancel. Hopefully
1406 this will fix Arno's seg fault, bug #744.
1407 kes Add back code to disable conio in configure. Fixes bug #743.
1408 kes Correct the Options scanner in the FD to correctly handle
1409 SHA1 option, which was eating the next option. Reported by
1411 kes Add code to indicate when the SD is spooling, spool wait, and
1412 despooling as requested by Alan Brown.
1414 Version 2.0.0 released: 4 January 2007