1 Technical notes on version 2.2
5 ebl Fix negative VolWriteTime value during UpdateMedia
7 kes Eliminate ./configure warning on po directory
8 kes Fix bug #1063, reuse of freed ptr in list nextvol.
9 kes Release regex compile buffer in filed/job.c
10 kes Add proper type of const char in sql_create.c
11 kes Turn off debug in daemon termination routines
12 kes Move free_volume_list() before devices are freed in stored.c
13 kes Fix reference to uninitalized stack variables in bregex.c.
14 This should correct bug #1067.
16 kes Fix possible seg fault in SD when freeing a volume entry.
18 kes Apply patch from bug #1069 that corrects spurious error messages
19 when ACLs enabled on SGI but no ACL exists.
20 ebl Fix a storage deamon segfault at debug level 500.
22 Beta Release Version 2.2.9-b4
24 kes Re-enable code to remember last volume mounted on a non-tape
26 kes Add patch supplied in bug #1068 that fixes a SD crash when using
27 a Virtual autochanger.
28 kes Generate correct JobMedia records during spooling/despooling when
29 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
30 <tih@hamartun.priv.no> for excellent analysis and testing.
32 Beta release Version 2.2.9-b3
34 kes Rework certain SD locking based on gdb tracebacks of deadlocks
35 sent by Eric. This code now uses only the volume_lock() rather
36 than the reservations lock when at EOM and acquiring a new
38 kes Ensure only one exit point in several subroutines.
40 Beta release version 2.2.9-b2
42 kes Fix to initial tape drive open to release the volume name
44 Beta release Version 2.2.9-b1
46 kes Fix to JobMedia fix.
47 kes Fix bug pointed out by Peter Much that causes the StorageId to
48 be updated when reading a tape (during migration, it could have
49 been incorrectly set to the write StorageId).
51 kes Implement autostart scripts for Debian
53 kes Fix mtx-changer.in for broken Debian mt program.
55 kes Massive commit of all fixes and back ports to create 2.2.9
57 kes Apply doc fix from bug #1062.
58 kes Resolve crash and improper restore wx-console Win32 restore
60 kes Update Win32 wxWidgets to latest version.
61 kes Attempt to do correct handling of Win32 mount points. Should
63 kes Fix Win32 FD backup/restore memory leak due to improper termination
64 of BackupRead/Write. This fixes bug# 1038.
65 kes Add const to AIX prototype for initgroups()
67 kes Undo bug #1047 heap overrun fix as it is not correct.
69 kes Fix creating first JobMedia record during Migration to include
70 proper index. This caused slow restores of migrated jobs.
72 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
73 and do not strip paths on symbolic links.
74 kes Set catalog backup database and user name from values specified on
76 ebl Apply patch to correct bug #1031, about wrong pool source information
81 kes Apply patch from Martin to correct bug #1040, bscan sets existing
83 kes Fixed important spelling error in doc -- bug #1045.
85 kes Move initialization of read/write res lock earlier in the code.
86 This fixes the crash with a null conf file. This fixes bug
88 kes Redefine CURES in lib/parse_conf to be URES and move it all
89 into lib/parse_conf.c -- this responds to bug #1042, but does
90 not fix it. The fix is not to compile with FORTIFY_SOURCE.
91 kes Backport fix de-referencing a NULL pointer in the scanner from
92 the trunk SVN. I don't think this was reported as a bug.
94 Beta release Version 2.2.8
96 kes Re-enable the new job code editing (%f).
98 kes Fix bsnprintf for float point numbers. I broke recently when
99 parameterizing some variables. This fixes bug #1036.
101 kes Move Heartbeat documentation from Job to Director resource.
102 This fixes bug #1033.
104 kes Fix existing switch drive SD code to call autochanger to release
105 any old volume. This must be done to keep the autochanger from
106 releasing subsequently newly reserved volumes in doing a close().
107 This should possibly fix bugs #1032 and #1018.
108 kes Apply big backport of current SVN SD code that corrects a number
109 of race conditions. This is a first step in fixing bug #1018.
111 ebl Fixes bug #1028 where "Selection Type" option was not usable
115 Release Version 2.2.7
117 kes Partial back out (disabled) %f job code editing because it
118 does not build on Win32.
119 kes Fix seg fault Frank Sweetser reports in regression testing
120 on his systems. The problem was that the original author of
121 bsnprintf.c did not take into account the side effects of
122 using ++x in the argument to a #define.
124 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
125 that implements double quoting include names in conf files,
126 and also allows piping input by having the first character
127 be a vertical bar (|).
128 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
129 that implement %f in RunScripts to pass the FileSet name.
130 kes Skip leading | when lex input comes from a pipe as suggested
131 by Michael Stapelberg <michael@stapelberg.de>.
133 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
134 Nerijus Baliunas <nerijus@users.sourceforge.net>
136 kes This patch corrects a problem where the maximum concurrent storage
137 jobs counter gets out of sync during restore jobs causing jobs to
138 'wait on max Storage jobs'. This patch fixes bug #1009.
140 kes Add new include to postgresql.c suggested by Marc Cousins so
141 that it compiles correctly with pgre version 8.3. Also fix
142 misuse of %x with pointer (should be %p).
144 kes This patch fixes bcopy so that it produces correct Volumes.
146 kes This patch eliminates spurious output to the console during a VerifyVolume
147 job that contains encrypted data. It fixes bug #1024.
149 kes This patch prevents the 'status dir' command from trying to use a scratch
150 volume and possibly moving it from one pool to another. This patch fixes
153 kes Fix --archivedir addition to configure. Replace it with
154 --with-archivedir in configure.in This fixes the regression
156 kes This patch fixes bug #1012 where the job is canceled because
157 of Max Run Time exceeded when the job has not yet started.
159 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
160 one 'part' to write. Instead of each part being stored on disk,
161 written to DVD, then deleted from disk, all parts are written to disk,
162 and only the last is written and deleted from disk.
164 kes Correct typos in disk-changer.in
166 kes This patch fixes the status command to include the formating string for
167 JS_AttrInserting. It fixes bug #1021.
168 kes This patch should fix the Mac OS X build problem on the latest
169 Darwin, where sys/types.h was not included correctly (apparently
170 due to a change in the Mac headers). The solution was to explicitly
171 ensure that it is defined for the ./configure.
172 This patch also has a rebuild of configure that includes the Debian
173 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
174 kes This patch should ensure that queued messages to the console are
175 displayed as soon as possible. It should fix bug #1007, but has been
176 reported not to work.
178 kes This patch fixes the infinite loop when trying to increase the
179 maximum number of volumes in a Pool during the add command.
180 This patch fixes bug #1008.
182 Release Version 2.2.6
184 kes Get fix for joblist bug in bat from trunk.
186 kes This patch fixes bug #1003 where putting the message output from
187 a Verify job into the catalog results in a recursive loop. The problem
188 seems to show up only with postgresql (to be verified).
190 kes Fix bug #942 where lots of emails where generated when the heartbeat
191 interval was low and Bacula wanted a different tape from the one in
194 ebl Apply 2.2.5-lastwritten.patch to fix the LastWritten field
195 which was updated during a restore (or a reading migration) bug #982
197 ebl Use qmake-qt4 instead of qmake when available (debian system).
199 kes Add a security warning to src/cats/make_catalog_backup.in indicating
200 that passing the password via the command line (arg 3) is insecure.
201 This responds to bug #990 (it doesn't fix it).
202 kes Apply 2.2.5-postgresql-errors.patch
203 kes Remove unneeded File table index on JobId, which is already
204 present as the first index of another multi-index.
206 kes Set default debug_level to zero. This corrects bugs #991 and #993.
207 kes Fix a crash in bat when it cannot connect to the Director for example
208 if the Director is not running.
210 kes Activate Close button on tray-monitor window. This fixes
213 kes Fix spurious warning message printed when creating a volume with
214 a LabelFormat. This fixes bug #976.
216 Release Version 2.2.5
218 kes Add JobId in place of Job name in all the Jmsg() output.
219 kes Correct the APP_DESC for the Win32 storage service (remove an e).
221 kes Add new SD despooling attributes and Dir inserting attributes
222 job status codes. This fixes bug #961.
223 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
225 kes Fix doc issue. This fixes bug #963.
226 kes Fix listing performance problems in bat. Pointed out by
228 ebl Fix replace on restore. This fixes bug #969
229 kes Fix bat code that tests for Win32. This should fix bug #968
230 kes Query 5 list wrong Vol after migration. This fixes bug #960
232 kes Correct lib/Makefile.in to include enh_fnmatch.o that was removed
233 in back porting from 2.3.x
235 kes Backport almost 4000 lines of 2.3 code that fixes a number of bugs.
236 The details are included in the notes in this file.
238 kes Backport 2.3 code that fixes: it fixes incorrect or incomplete error
239 messages; it fixes a problem opening the SQLite3 database when multiple
240 simultaneous jobs were running; it fixes a bug with certain versions of
241 MySQL where batch inserts failed because of table name character case
242 (upper/lower) differences.
243 kes Fix race condition that drops final block written to volume.
244 This happens in rare cases with multiple simultaneous jobs
245 when the Volume fills. This fixes bug #964. May be related
246 to bug #935 and possibly #903.
248 kes Fix FD->SD authorization failure, which was due to spurious
249 wakeups from a pthread_cond_timedwait(). Simply check the
250 predicate before continuing. This fixes bug #953
251 dvl Add new configuration item --archivedir
252 dvl Adjust regression tests to use tmp not /tmp. This will allow
253 multiple concurrent runs of the regression tests.
255 kes Eliminate more strerror() and replace with bstrerror().
256 kes Remove BSD getopt and replace with unrestricted IBM version.
257 kes Fix Win32 build for changed calling sequences.
259 kes Fix FD->SD authorization failure, which was due to spurious
260 wakeups from a pthread_cond_timedwait(). Simply check the
261 predicate before continuing. This fixes bug #953.
262 kes Add const char where needed (more to do).
264 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
265 kes Don't overwrite error message in check_tables_version.
267 kes Unlock batch insert tables with same calls used elsewhere.
268 kes Allow starting 59 jobs a second.
269 kes Make SD session key more random.
270 kes Add retry for SQLite opening db if it fails. Probably helps
272 kes Suppress extra error messages during batch insert failure.
274 kes Put some FD auth code on dbglvl rather than fixed.
275 kes Return insert attributes error message in db msg buffer to avoid
276 false error messages. Helps fix bug #966.
277 kes Separate batch init error messages. Probably helps fix bug #966.
278 kes If Dir gets an error during inserting attributes, cancel SD.
279 This reduces unnecessary error messages.
281 ebl Cleanup batch insert code. Probably fixes bug #965.
283 kes Turn off some code when batch insert not enabled.
284 kes Edit FD name in connect error messages.
286 kes Add code to handle tray monitor separated from Win32 FD.
287 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
289 kes Fix ANSI tape labeling. This fixes bug #954.
290 kes Increase the max block size to 4MB fixes bug #957.
291 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
292 is not properly mounted (recognized) during a poll.
293 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
294 Job that has differences reports Verify OK.
295 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
297 Release Version 2.2.4
299 kes Increase size of name string when FD making connection to SD.
302 kes Add waits to multiple exit detection code to try to force pid
303 file to always be deleted.
304 kes Restore good dev.tar.gz to rescue set appropriate binary property.
306 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
307 trying to switch drives by checking for blocking before unblocking.
309 kes Cancel storage daemon in all cases where FD reports error. This
310 should fix virtually all cases of bug #920.
312 kes Fix error message that was clobbered when Dir tells SD it does not
313 have write permission on Volume. This should fix a minor point
314 in bug #942, but not the main problem.
315 kes Add code to cancel job in SD if FD connection fails. This should
317 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
318 kes Fix migration code to get correct Volume name with multiple volumes
319 by skipping |. Fixes bug #936.
320 kes Implement patch supplied by Landon to fix bug #944 where using
321 TLS with bconsole uses 99+% of the CPU.
322 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
324 kes Move patches into patches directory.
326 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
329 ebl Using 'm' in bconsole will show messages like before,
330 and not memory usage.
332 Release Version 2.2.3
333 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
336 kes Fix bug #935, and probably also bug #903 where files were not
337 restored. MediaId was not properly set in JobMedia record after
340 kes Add ./configure search in qwt-qt4 for qwt package
341 kes Apply Martin Simmons patch that should turn off the new API usage
342 when batch insert is turned off allowing building on older
345 Release Version 2.2.2
347 ebl Detect if new PosgreSQL batch insert API is present.
348 kes Correct incorrect mempool call causing Director crash.
349 sb Update spec files for 2.2.1 release
351 Release Version 2.2.1
353 kes Update POTFILES.in
354 kes Cleanup a few underquoted AC_DEFUNs in configure
355 kes Apply patch from Martin Simmons that adds a test for va_copy to
358 kes Fix bug #921 by increasing the number of tries to create a new volume
360 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
361 can be called multiple times. Implement a version for machines
362 without va_copy() that gets a big buffer.
364 kes Integrate more portable zone offset code into bsmtp.c
365 Submitted by Attila Fülöp.
367 kes Fix bad SD->FD return status reported by
368 (James Harper) <james.harper@bendigoit.com.au>
369 ebl Fix a bug in read_close_session which return random status
370 thanks to James Harper
372 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
373 and directory names during restore of single file/directories.
374 kes Add sanity checks to .sql command when string is empty. Hopefully
375 that will resolve Dirks Director crash.
377 kes Apply patch submitted by Martin Simmons that corrects a seg fault
378 in the bsmtp chat subroutine when debug is >= 10.
380 kes Fix Director crash when running bat SQL queries.
381 kes Add David's notes on Item 8: Copy pools.
383 kes Rework projects file to be current and ready for a vote.
384 kes Enhance lex scanner error message.
386 kes Tweak LICENSE file to mention BSD code.
387 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
388 if specified on the ./configure.
389 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
390 This class is intended to allow us to open a second bsock to the
391 Director while in the restore subdialog.
393 kes Fix configure to create bat Makefile before creating dependencies.
394 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
395 kes Add a tooltip to the tray monitor.
396 dvl Set the Director's PID file before dropping privs. This fixes
399 kes Update AUTHORs file
400 kes Increase the default max concurrent jobs to 20 in FD and SD to
401 correspond with the default .conf files.
402 kes Rewrite the Win32 service routines. This eliminates the 3 copies
403 some different, of the same file created by RN when porting the
405 kes Rearrange some of the Win32 directories and the placement of the files
407 kes Set DEVELOPER flag in version.h
409 ========================================================================
410 Release Version 2.2.0
412 kes Apply a second doc patch from Marc.
413 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
414 improves the tips section that discusses how to setup multiple
417 kes Update bat README file.
418 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
419 corrects a typo in the Recycle status check in db_find_next_volume().
420 This will probably fix a number of annoying problems with multiple
422 kes Modify most of dird/msgchan.c to use bsock class calls rather than
423 bnet calls -- no functionality change.
425 kes Modify the Verify output to specify if files are missing on
426 the Volume(s) or disk. Fixes confusion in bug #916.
427 kes When more than one Volume is read in a migration job, the last
428 Volume bytes reported are from the last read volume rather than
429 the last written volume. Fixed. This fixes bug #910.
430 kes Fix display of Recycle flag after update volume=foo recycle=yes.
431 It previously printed New Recyle flag is: no. This fixes bug
434 kes Correct seg fault when switching tape drives during restore.
435 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
436 be used until after 2.2.0 release.
438 kes Remove fnmatch() in SD that permitted wild card specifications.
441 kes Fix %g in filename returned by SQL for browse tree reported by
443 kes Fix configure so that it puts config.out in the cwd rather than
445 kes Attempt to fix the locking problem reported by Eric in bug #906.
446 kes Make berrno class to leave errno unchanged after constructor call.
447 kes Make bnet_server use the heap rather than the stack to allocate
448 its socket fd pointers to avoid a crash at termination. Problem
449 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
451 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
452 and putting it in depkgs-qt along with Qt4.3.
454 kes Rework code in acquire.c that switches drives for reading when
455 the Media Type does not match. This should fix bug #906
457 ebl Fix a director segfault during job setup #907
458 kes Correct seg fault in postgresql when first operation returns no
459 rows. Fixes Dirks File browser problem seg fault with bat.
461 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
462 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
465 kes Implement PopUp YES/NO dialog for bat.
467 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
469 kes Correct RunScript to terminate job in FD on failure.
470 kes Change abort_on_error and AbortJobOnError to fail_on_error
471 and FailJobOnError in RunScripts.
472 kes Minor tweaks of code formating in RunScripts, principally to
473 avoid depassing 80 columns.
475 kes Eliminate one #ifdef Win32 in bsmtp
476 kes Implement grow tool to grow a file for testing very large databases.
477 kes Add big-vol-test to test Bacula seeking with > 5GB.
480 kes Modify find_next_volume() to return all values in Media record.
481 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
485 kes Update Release notes
487 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
488 Warning, in previous beta version, all media get from scratch keep their
491 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
492 This should fix bug #842. Made a note to look at removing the temp
493 files at the end of the install.
494 kes Add ability to mount and unmount a file device providing it is
495 marked as being removable and has the appropriate mount and unmount
496 commands defined in the Device resource. This fixes bug #830.
497 kes When applying a storage override, release all previous storage
498 definitions rather than just prepending the new storage.
499 This should prevent a good deal of confusion.
501 kes Implement ./configure search for qwt libraries.
503 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
504 Win32 FD. This should fix bug #893.
505 kes Remove an unnecessary beep in Win32 init code.
506 kes Update copyright dates in Win32 executable about boxes.
507 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
508 code with a BSD getopt.c and getopt.h.
509 kes Remove sched.h from the Win32 compat directory -- not used.
510 kes Remove the Exit menu item from the Win32 tray monitor. If you really
511 need to shut it down, do it through the services panel or the command
513 kes Remove some inappropriate Bacula FSFE copyrights.
514 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
515 kes Fix regress config non-portable test as pointed out by
516 Florian Heigl <florian.heigl@gmail.com>
517 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
518 as pointed out by Florian Heigl <florian.heigl@gmail.com>
520 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
521 Reported by Frank Sweetser.
525 kes Fix client-only build.
526 kes Integrate client-only fixes for bsys (initgroups) and conio from
527 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
528 kes Make arguments to get_scratch_volume() in same order as other
530 kes Rework the prune_volumes() subroutine so that after purging and
531 no volume found in desired pool, it will check for a scratch
532 volume. This prevents recycling the whole scratch pool.
533 kes Add code to status storage to print boffset_t (largefile support).
535 kes Move qwt (Graphics libarary for Qt4) to depkgs.
536 kes You now need a --with-qwt=<dir> to be able to build bat.
537 kes Update src/win32/cats/bacula_cats.def to include the new
538 db_get_query_dbids() call on Win32.
540 kes Correct a problem when selecting a scratch volume and moving
541 it to another pool that lost some columns.
542 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
543 kes Enhance Autochanger error messages to include Volume and device name.
544 kes Rework prune_volumes() code to take account of InChanger flag,
545 and to handle recycling volumes going to the Scratch pool and
546 current pool because the RecyclePool directive.
547 kes Implement a better and more efficient db_get_query_dbids() to
548 handle creating and passing back a list of DBIds.
552 kes Start work on new more efficient DBId subroutine. First use
553 will be for recycling volume to Scratch inchanger.
554 kes Increase number of JobIds in pruning from 1000 to 10000.
555 This to be replaced by above routine.
556 kes Begin implementation of building Qt4 on Win32.
557 kes Correct typo in fix I added for bad TLS shutdown.
558 kes Pull 2.0.3 patches into patches directory.
559 kes Update Release notes. Include qt-console in line count.
560 kes Update Projects file.
562 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
563 bug in migration code where a job that spanned two volumes
566 kes Implement new BST_DESPOOLING blocked state. Change from locking
567 during despooling in SD to blocking. This means that other threads
568 can work with the device structure, in particular the reservations
569 system while despooling.
571 kes Fix return in reservation message queue that missed clearing
572 the jcr lock (implemented 26Jun07 below).
573 kes Rename a number of dev methods to make locking function names
575 kes Document locking in lock.c. Move lock structures to new file
578 kes Move reservations message lock to lock jcr only this
580 kes Move main SD locking code into lock.c (new file).
581 kes Update Win32 build to include lock.c
585 kes Dirk committed the qwt library code for drawing graphs in bat.
586 kes Tweak install of qwt so that it is integrated with ./configure.
588 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
589 out by Eric (my typo).
590 ebl Fix configure.in to get batch mode enable
591 kes Return correct string from authenticate.cpp in bat when connecting
593 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
594 spurious line drops when using TLS.
595 kes Do not file reparse points when restoring a file that already
598 kes Implement Windows reparse points -- similar to directories, but
599 we do not descend into it. This is a first cut. They seem to
600 be backed up, but restore is not yet tested.
601 kes Remove restore_blocking in tls code when shutting a socket to leave
602 it in blocking mode. Hopefully this will fix the encryption bug
603 reported by Frank Sweetser.
604 kes When opening a file for backup, tell the OS that we are going to
605 read it sequentially -- optimization.
606 kes Change variable names in authenticate_director() to not conflict
607 with member names in bat. Caused great confusion with compiler,
610 kes Queue openssl error messages in case of comm problem.
611 kes Do shutdown() call if socket terminated.
612 kes Remove some duplicated code in tls.c
613 kes Move more of the bsock member variables into private and access
615 kes Add Frank Sweetser's tls-test to the regression suite.
617 kes Add Swedish sv.po file
619 kes Don't print clock skew message in FD if less than 3 seconds diff.
620 kes Add a bit of VSS info to status client.
621 kes Implement a first cut of Vista VSS, using Win2003 code.
625 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
626 loaded tape but uses first drive).
627 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
628 This was indeed a Win32 issue.
630 kes Simplify search of autochanger for in-use Volume.
631 kes Fix exit condition of check for in-use volume. kes Remove
632 inappropriate my_postgresql_free_result() in db_close()
634 kes Fix bad return in FD when encryption signature not found.
635 Probably caused a crash.
636 kes Inhibit missing encryption signature error messages for
637 file types where no signature computed.
638 kes Correct inverted check on autochanger in reservation system.
639 kes Tweak debug code in autochanger reservation.
641 kes Add some additional locking in the cats directory in subroutines
642 that modify packet variables called from batch insert.
643 kes Rework how dcrs are allocated. new_dcr() can now be called
644 with an existing pointer, and it will simply clean it up.
645 This allows the reservation system to test various different
646 devices, and will permit easy device changes.
647 kes A bunch of changes all over to handle new new_dcr() calling
649 kes Work more on the Volume management in the SD. Remember Volumes
650 for tape drives and for autochangers (even virtual disk changers).
651 kes When looking at the Volume list to reserve a drive, handle
652 autochanger names correctly by interating through the changer
653 devices. Also call the Director to see if a Volume is suitable
655 kes Fix some bugs in bscan. Make sure all media records are written.
656 Make sure that valid JobMedia records are written for disk files.
657 Previously they were completely wrong.
658 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
659 that the URLs don't change and so that the developers will all
660 work off the same copy. Rebuild from scrach.
661 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
665 kes Fix seg fault in FD from incorrect digest size.
666 kes Fix argument to non-OpenSSL crypto.c subroutine.
670 kes Remove a few malloc()s from the encryption code.
671 kes Use the class calls to bsock in filed/backup.c and restore.c in
672 place of the old bnet_xxx code.
673 kes Implement code that does an on the fly calculation of the
674 signing digest during restore of encrypted files. It makes
675 a best guess at the algorithm, and if it is not correct, will
676 then revert to the old code which reads the file after it is
678 kes Implement at least one missing crypto stream in stream_to_ascii()
679 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
680 #877 where a reload with bad syntax causes Dir to exit.
682 Cut: 2.1.14 beta (not released)
684 kes Do not free a volume on a tape drive until another volume is
685 mounted and read, or the autochanger unloads the volume.
686 This should help the SD re-use volumes that are already mounted,
687 and should fix bug #886.
688 kes Apply patch from user brettedgar that allows gnome2-console include
689 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
690 kes Apply patch from Lucien Weller that fixes day of week calculation
691 because of DST flag problem. Fixes bug #887.
693 kes Move find_next_appendable_volume() to after acquiring a valid device
694 in reserve.c. This fixes bug #864 -- confirmed by reporter.
696 kes Unable to reproduce bug 872. However added additional testing for
698 kes Bug #874 resolved by documenting SQLite limitations.
699 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
700 kes Bug #881 resolved by removing typo in mtx-changer script.
701 kes Made Frank Sweetser's wiki the official Bacula wiki with his
702 approval. Added a link to the wiki on the web page, and implemented
703 a backup from http://paramount.ind.wpi.edu
705 kes Fix update allfrompool to pass pool name.
707 kes Convert to pure GPL v2 license.
708 kes Fix sscanf problems reported by Peter Buschman that caused
709 a bus error on Solaris.
710 kes Rework (simplify) the select prompt in bat.
711 kes Move get_jobid_from_tid() into lib and create a
713 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
714 should definitely fix the problem of lost error messages in the
716 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
717 kes Eliminate tcpd.h from the project. Enclose the #include from the
718 library with extern C ...
719 kes Add print of signal name when a signal is trapped.
723 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
725 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
726 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
727 makes SQLit3 run 30 times faster, though a bit less safe.
728 kes Implement --with-batch-insert in configure and detection of thread
729 safe libraries. It is on by default, but turned off if no thread
730 safe library (e.g. SQLite 2) is available.
732 kes Fix Bacula PostgreSQL buffer overruns.
733 kes Do better checking for NULL results returned from PostgreSQL;
734 implement retry for failed queries; clear results buffer after
735 failed query. Hopefully this will correct the PostgreSQL failures.
737 kes Implement algorithm to handle only one appendable volume with
738 Prefer Mounted Volumes = no.
739 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
740 returned from a query.
741 kes Make volume lock recursive.
742 kes Implement an additional volume reservation algorithm that
743 starts by considering all reserved volumes then uses the
744 old brute force algorithm of searching the resources to
745 find a suitable device.
746 kes Add new reservations debug code and refine the old code.
747 kes Update the win32/dll/bacula.defs file.
749 kes Tweak reservations algorithm to permit a few more cases, i.e.
750 volume reserved, but on different drive, ...
751 kes Enhance SD status to include Pool and Media Type for drive in a
752 more readable format (a bit longer).
753 kes Fix PostgreSQL double free.
755 kes Minor refactoring of restore decryption code.
756 kes Add code to smartall.c to detect double free of a buffer.
758 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
759 so that bsmtp will create a correct email address (mailbox only).
760 kes Modify 'memory' command so that the buffers are listed as 'In use'
761 to avoid confusion with Orphaned buffers.
762 kes I reworked the OpenSSL include/lib flags to be handled in
763 the standard Bacula way, which should fix bug #863 concerning
764 non-standard OpenSSL libraries.
766 kes Implement Help Browser window for bat.
767 kes Fix reload bug that reset StorageId to zero.
769 kes Fix TLS #ifdefing when TLS turned off.
770 kes Ensure that when labelling a tape with Slot=0 that InChanger
772 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
774 kes Add StartTime to final uar_sel_jobid_temp query so that we can
775 add DISTINCT (required by PostgreSQL).
776 kes Implement BSOCK authenticate_director() method. Eventually will
777 authenicate all daemons.
778 kes Move several more functions into the BSOCK class.
780 kes Add code to tell the OS that we no longer need a cached
781 file that we were reading. In findlib/bfile.c. Also,
782 only cache files that we are reading. Thanks to
783 Tobias Oetiker <tobi@oetiker.ch> for the idea.
784 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
785 kes Implement script to automatically generate cats and dll .def
787 kes Update README.mingw32 to include new .def file generation.
788 kes Correct typo in UTF-8 error message as reported by:
789 jhernandez <julianhernandez@gmail.com>
790 kes Add additional sm_check() code on debug level 1.
791 kes Set default debug level to 1.
792 kes Trap SIGABRT in attempt to get traceback.
794 kes Reduce bat connect timeout from 30 to 15 seconds.
795 kes More restructuring and implementing BSOCK class in place of
797 kes Remove a few unnecessary malloc() tests in crypto code.
798 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
799 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
800 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
802 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
804 kes Fix Verify InitCatalog. The attributes were not pointing to the
805 correct saved location.
806 kes Implement message callback so that GUI is sure to get all
807 daemon messages. Currently displayed in a dialog in bat.
808 kes Ignore SIGUSR2 (Bacula timer) in bat.
809 kes Apply regress patch from bug #859 to allow regress to work
810 with Solaris compiler.
812 kes Begin adding TLS support to bat.
813 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
814 clean up lex.c and make it more readable.
816 kes Move more bnet functions into the BSOCK class.
817 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
818 kes Complete change of berrno strerror() method to bstrerror()
822 kes Cleanup incorrect email addresses in bsmtp.
823 kes Make bat display initial messages rather than discard them.
825 kes First cut of adding .mod to the run command.
826 kes Implement auto display of messages in bat.
827 kes Enhanced preferences to allow all Bacula output to be
830 kes Try to make bsmtp date routines more generic.
831 kes Fixed bug #856 autochanger documentation.
832 kes Rework bsmtp date editing for Win32. This fixes bug #854.
833 kes Add new cats entry point so Win32 builds.
835 kes Attempt to fix bsmtp date editing on OSes without %z editing.
837 kes Do better checking for the MySQL 64 bit libraries looking for both
838 .a and .so libraries.
839 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
840 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
841 kes Require the thread safe version of MySQL during configure. Thanks
842 to Andre Noll for pointing this out.
843 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
844 continuing in migration code.
845 kes Apply implementation of tray-monitor font derived from gnome-console
846 submitted by Andreas Piesk <a.piesk@gmx.net>
848 kes Eliminate important memory loss in SQLite
849 kes Fixed the batch insert MySQL thread specific data that was not
850 being freed. See cats/mysql.c:db_thread_cleanup().
851 kes Fix restore before command.
852 kes Convert old hdr.name to name() in a few places.
853 kes Implement update jobid command.
854 kes Return all time_t dates in db_get_job_record()
855 kes Stop watchdog in SD earlier.
856 kes Put Pool just after Storage in please mount message.
857 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
860 kes Update the po files.
861 kes Fix Verify InitCatalog by making it cache attributes.
863 kes Change name bacula-bat to bat for man 1 page to correspond to
865 kes Check for client and store NULL pointers in status command. This
867 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
868 kes Fix sign extended editing of %p.
869 kes Clean out a little old #ifdefing in cats/mysql.c
871 kes If time diff between DIR and FD is more than 600 seconds convert
872 INFO message to WARNING.
873 kes Implement heap size display in status for all daemons.
874 kes Attempt to fix MySQL db open memory loss (not successfull).
875 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
876 kes Eliminate memory loss in MySQL (possibly other SQLs) during
877 Query. This looks like a MySQL but but by doing extra releases,
878 the memory goes away. This should fix bug #847.
880 kes When backup fails, cancel SD before waiting for sd termination.
881 kes If SD is waiting for FD to connect during cancel, wake up the
883 kes Fix fsf code so that errno is correctly reported.
884 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
886 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
887 so that Bacula doesn't later stumble into a seg fault.
888 kes Use the term Restore Client in the restore Job report.
889 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
890 the original job's FileSetId.
891 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
892 spooling in migration jobs. Not yet tested.
893 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
894 reading conf file from a pipe. However, do it with open_bpipe()
895 rather than popen. Not yet tested.
897 kes Fix an ugly bug where the VolCatBytes were getting updated
899 kes Implement bconsole memory command that prints current memory
900 usage, plus smartalloc dump.
901 kes Clarify some error messages in backup, admin, and migrate.
902 kes Shrink label dialog to smaller size.
903 kes Invert Cancel OK buttons on restore to be OK Cancel.
904 kes More strerror() to bstrerror() conversions.
906 kes Start implementing bstrerror() in place of strerror().
907 kes Stripping path -- seems to work.
909 kes Prevent door and port files from being restored (mostly
911 kes Free an unreleased buffer in compat code.
912 kes Change console Job name from *Console* to -Console- to eliminate
913 Win32 filename problems. Put Win32 path separator when creating
914 Console file. This fixes bug #846.
915 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
917 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
919 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
920 to force Win32 error message.
922 kes First cut strip path. The data should be passed to the FD,
923 but nothing is done with it yet.
924 kes Enhance the digest and signature routines in the crypto
925 library to accept a JCR and to use it to print error messages
926 so that they will go in the Job report rather than the daemon's
928 kes Simplify some of the verify signature code.
929 kes Simplify a few of the alternative returns in the signature
932 ebl Use only POSIX regex instead of GNU regex in breg.c for
933 File relocation. It fix broken freebsd compilation.
934 kes Convert all other Dir files to use new ua class message
936 kes Tentative fix for missing digest signature in bug 807.
937 kes Correct handle problem in new win32_ftruncate routine.
938 kes Convert ua_purge.c and ua_update.c to use new ua class
939 message routines for bat.
941 kes Correct incorrect installation of LICENSE in Win32 installer.
942 kes Display LICENSE at the beginning of the Win32 install.
943 kes Attempt to correct the need for the png files to be installed
945 kes Reapply my bat.conf install script in qt-console. I think I
946 editted bat.pro instead of bat.pro.in and it was lost.
947 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
948 the /var/lock/subsys for subsysdir. Also corrects typos in the
951 kes First cut update job.
952 kes Correct configure to include qmake of src/qt-console directory.
954 kes Make restore job yes/mod/no print in one command so GUI works.
955 kes First cut implementing backup and restore client.
956 kes Correct editing in Verify output that caused a seg fault.
958 kes Insure that bat.conf is not overwritten during installation.
959 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
960 while I was implementing migration in March 2006 !
962 ebl Cleanup file relocation, using char *RegexWhere instead of
963 char *where + bool where_use_regexp
964 kes Update some manpages and add bat manpage.
965 kes Make a first cut at converting bacula.spec.in for bwx-console
967 kes Apply patch from John Goerzen to add hostname as fourth argument
968 to make_catalog_backup script.
969 kes Fix typos I introduced into bsmtp.c
970 kes Make pm_strxxx() routines handle input of NULL pointer. This
971 is to protect from NULL pointers returned from SQL databases.
972 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
973 kes Add more debug to FIFO code -- fix fifo regression test.
975 kes Implement posix_fadvise in FD, and for reading spool files in SD.
976 kes Add thread timer to bnet_connect() to break from OS if wait time
979 kes Update Win32 build to include new files, new symbols, and
981 kes Implement socket level heartbeat (tcp_keepidle)
982 ebl Commit File relocation patch
983 kes Make bat have 'make install' target.
984 kes Warn during install if old gnome-console binary found.
985 kes Warn during install if old wx-console binary found.
986 kes Add -8 option to bsmtp command line to add content type utf-8.
987 Fixes bug #809. (Character coding problem in bsmtp).
988 kes If < is found in target (from, to, cc) then do not enclose the
989 target in < > in bsmtp. Fixes bug #772 (malformed address).
990 kes When printing certain items in dbcheck, stop after 300000.
991 Fixes bug #822. (dbcheck loops).
992 kes Incorrect status in Dir after waiting for mount with poll set.
995 kes Extend idea of Prefer Mounted Volumes to mean a volume about
997 kes Print waiting to reserve a device every 5 mins.
999 kes Don't call close_part in label.c if tape and relabel.
1000 kes Don't free volume if busy in close() -- should help with
1002 ebl Fix #824 RunScript bug (After script could be execute twice)
1003 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1004 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1005 Add a regression script to test RunScript
1007 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1010 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1011 deprecated. No additional bugs will be fixed, and they will be dropped
1012 in a future release (probably 2.4.0).
1013 kes Change name of wx-console to bwx-console to make it more Bacula
1015 kes Change the name of gnome-console to bgnome-console to make it
1018 kes Some time in March, a Feature Request with patch from Jorj Bauer
1019 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1021 The ability for the director to validate a Client (FD) CN against
1022 an arbitrary set of patterns rather than the hostname, with
1023 A new 'TLS Allowed CN' set of directives which are implemented
1024 in the Client resource. Then pattern matching is used in place
1025 of hostname matching against the Certificate's CN. As an example, we
1026 have certificates which (a) use a local CA, and (b) have a CN of the
1028 kes Add new/changed entry points to Win32 build
1029 kes Create unaccepted-projects for projects that are not accepted.
1030 kes Simplify locking in the reservations system.
1031 kes Add more debug code in reservations.
1032 kes Make sure error condition on reserving a volume is handled correctly.
1033 kes Correct handling of volume_in_use.
1034 kes Correct handling of initializing a device.
1035 kes Move handling of broadcasting releasing a device into release_device().
1036 kes Correct attaching dcr to dev so that it is only done if device
1037 is properly initiated.
1039 kes Locking debug level tweaks in SD.
1040 kes Tweak new Volume code.
1042 kes Add exec external-command [wait-seconds] to bconsole. This
1043 executes the external-command. Note! normally external-command
1044 should be enclosed in double quotes.
1045 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1046 it should normally be off in a production system.
1048 kes Implement die command for SD so that we can force it to dump.
1049 kes Implement SD lock debug code.
1050 kes Implement new algorithm for keeping Volume list in SD. It
1051 is now owned by the device.
1053 kes Implement new code for freeing in use volumes that should
1054 resolve if not all, some of the problems of multiple drive
1055 tape conflicts described in bug 801.
1057 kes Fix gui/bacula-web/images files in svn.
1058 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1060 ebl Fix a bug in batch mode (in string escape)
1061 kes Correct migration prune SQL typo that crept in in a
1062 recent 2.1.x change.
1064 kes Move bnet_despool() into class in bsock.c
1065 kes Modify job report to include director name and Build OS.
1066 kes Move drop root privilege and check_catalog() before fork.
1067 kes Add update database scripts (version 9 to 10) to updatedb directory.
1069 ebl Check size and age of each file after its backup to see if
1070 it has changed during backup, if 'checkfilechanges' is set.
1071 The FD will do an extra check (stat(2)) after
1072 each file backup. mtime, ctime and size are compared with
1073 'before backup' information. If time or size mismatch, an
1074 error message will be generated. You must upgrade FD to use it.
1076 kes Make database name and user configurable
1077 --with-db-name=xxx --with-db-user=xxx
1078 kes Add back database type to message.c for debugging.
1080 kes Implement dir_sql() which issues an SQL query.
1081 kes Modify bat medialist to use dir_sql() and do some minor C++
1082 formatting as well as eliminating a number of pointers, simplifing
1085 kes Fix some of the mtx-changer grep commands for tape label readers.
1086 kes Convert a number of bsendmsg into the appropriate send/warning/error
1087 message class calls.
1088 kes Suppress the using database message in the .sql command.
1089 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1091 kes Add context menu for floating a window.
1092 kes Some minor cleanup and name changes in qt-console
1093 kes Add doing mt setblk 0 in Win32 mtx-changer.
1094 kes Apply Martin's bug fix to move definition of ENODATA for
1096 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1097 sqlite2 and sqlite3.
1099 kes More pruning cleanup.
1100 kes Turn on wait_for_drive by default in mtx-changer.
1101 kes Turn on Batch insert code by default as it now passes regression.
1102 kes Add ./configure --enable-bat to enable building of Bat.
1103 No install yet though.
1105 kes Implement a new .sql command for bat.
1106 kes Implement code to turn off pruning in obtaining the next volume.
1107 Pruning is turned off for the status dir command, but turned on
1108 for SD requests and for the list nextvolume command.
1110 kes Correct Qmsg() that was not updated correctly when committing a
1111 previous change (probably the recent TLS patch).
1113 kes Write new subroutine is_volume_purged() that explicitly checks
1114 if the Volume is purged, and if so marks it as such. This should
1115 resolve problems reported about needing to mount twice to recycle
1117 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1118 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1119 amount of duplicated code.
1120 kes Do volume pruning only for the Media Type desired (reduces pruning time
1121 if multiple Media Types are in the same pool).
1122 kes Implement more detailed info in the Job report for the Bacula version
1124 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1126 ebl Add bbatch tool to bench database and insert mode.
1127 Fix sql quote stuff in batch mode
1128 Fix sql stuff for mysql
1130 kes Correct problems with am/pm scheduling. Fixes bug #808.
1131 kes Implement new prunning code that prunes up to 1000 jobs at
1132 the same time. The same technique can be applied to a number
1133 of other prune/purge subroutines.
1134 kes Add an insanity check when starting a new tape job to ensure
1135 that the tape position has not been changed. If so fail the
1137 kes Fix Win32 build for dlls to add the folllowing:
1138 src/lib/bsock.c -- new file with new entry points
1139 src/lib/dlist.c -- new entry points
1140 src/cats/sql_create.c -- new entry point
1141 src/cats/sql_cmds.c -- new DATA item exported
1143 ebl batch mode cleanup bscan-test is ok now.
1144 kes Implement SD code to check length of disk volume before appending.
1146 kes Correct return status on db_batch... routines.
1147 kes Add call to db_write_batch_file_records() to migration code.
1148 ebl Fix AfterJob timing
1149 kes Move the checking of the database in initializion of the Director
1150 to after we drop privileges. This avoids the need for both root
1151 and bacula access to the DB.
1152 kes Correct a misplaced variable definition in src/filed/backup.c
1153 kes Correct how the new batch insert db_create_attributes_record()
1154 uses the arguments. Caused a seg fault in bscan.
1155 kes Implement lock() and unlock() methods in DEVICE class.
1156 Implement block() and set_block(xx) methods in DEVICE class.
1157 kes Modify bnet_connect() so that it uses time() to check for the
1158 wait time expiring (on some OSes, some system calls may not
1159 return immediately).
1160 kes Modify Verify to obtain the previous JobId when it is actually
1161 running rather than at schedule time (as it was in 1.38.x).
1162 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1164 kes When checking pid in pid file, continue running if the pid is
1165 the same as ours. This occurs on IRIX after a system crash.
1168 kes Extend new GUI API.
1169 kes Make the ua structure a class, and implement send_msg(),
1170 error_msg(), warning_msg(), and info_msg().
1172 kes Apply fix from for building wx-console on the Mac from
1174 kes Implement new select mechanism for GUI programs.
1175 kes Reorganize initialization of stackedWidgets in bat.
1177 kes Add updated nagios plugin supplied by Christian Masopust.
1179 kes More bat implementation.
1180 kes File migrate bug with Pool Occupancy using mediaid instead
1181 of jobids. Fixes bug #795.
1182 kes Fix orphaned buffers in filed backup and verify due to
1183 crypto buffers not freed during errors. Fixes bug #789.
1184 kes Extend new GUI api code to tree commands.
1185 kes Ensure that tree and dot commands check console ACLs.
1186 kes Permit marking directory with trailing slash.
1187 kes Allow 20 console connections (instead of only 10).
1189 kes Add smartctl call to bacula-sd.conf as an example of getting
1192 kes Modify jobq.c to let simultaneous restore jobs run. This may
1193 cause them to fail if they cannot get a drive.
1194 kes Add Client Connect Wait to Storage daemon to permit users to
1195 modify the time the SD waits for a FD connection.
1197 kes Correct virtual changer check which was backwards. This caused
1198 volumes to be unloaded into slots already occupied.
1200 kes Apply Command ACL filter to JobId list in restore command.
1201 kes Correct typeo in var.c patch.
1203 kes Don't let Bacula prune File or Job records for the current Job.
1204 kes Fix variable substitution pad + inc bug reported (with patch)
1207 kes Correct SQLite log table index as reported by Luca Berra.
1209 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1211 kes Begin implementing new comm signals for API.
1212 kes Fix a few places in lib/message.c where the open fd may
1214 kes Continue implementing lib/bsock.c (real class). Make jcr,
1215 who, host, and port private. There are new methods to access
1216 them for non-class use. This required touching a number of files.
1218 kes Add LANG=C to autoconf/randpass so it works with languages other
1219 than English. Fixes bug #788.
1221 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1223 You will not be able to generate Include/Exclude list any more.
1224 It will be fixed soon.
1225 If you want to use this, you can apply
1226 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1228 kes Restore of sockets created false error messages because Bacula
1229 no longer restores sockets, but the code was still trying to
1230 set the attributes on a non-existent file. Reported by a user.
1231 ebl finish RecyclePool feature
1232 Media will takes Pool.RecyclePool
1233 when moving from Scratch to a Pool or when user will do
1234 update volume=xxx frompool
1235 To use it, add RecyclePool = aPool to your Pool resource
1238 RecyclePool = Scratch
1242 kes Expand new BSOCK class adding signal() and new BNET signals.
1243 kes Begin enhancing the dot commands adding a new API function
1244 that returns more information and will make it easier
1245 to interface to the Director from a program.
1247 kes Make DEVICE fd private. Its new name is m_fd, and can be
1248 obtained with dev->fd() outside the class. This is the
1249 first of many DEVICE members to be made private.
1250 kes Implement Michael Renner's idea on having a virtual disk
1251 changer. I made some minor modifications (e.g. I did not
1252 implement the Virtual Changer directive, but simply set
1253 the Changer Command to an empty string.
1255 kes Implement a BSOCK send() method that writes the whole record
1256 in a single write() request rather than in two.
1257 ebl add update volume=xxx recyclepool=yyyy
1258 volume takes recyclepool from pool when using update volume=xxx from pool
1260 kes Fix encryption deblocking bug, which caused some restored files
1261 to be truncated. This fixes bug #763.
1262 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1263 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1265 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1266 ebl Use btime_t instead of uint64_t in media patch.
1268 kes Optimize the use of the database a bit in the Status dir command.
1269 Only open it when needed, ensure that if any previous database
1270 was opened, it is closed.
1272 kes Correct VolCatBytes bug from media patch.
1273 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1274 in the case of orphaned records.
1275 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1276 and File records in 300K chunks to be more efficient. This
1277 idea came from Juan Luis Frances (if I remember right).
1278 kes Apply Eric's scratch patch that moves a purged Volume to
1279 the RecyclePool. Question: how is RecyclePool set? what
1280 happens to the ScratchPool?
1281 kes Apply Eric's media patch that collects read/write media
1282 times as well as byte counts. This patch requires a
1283 simultaneous upgrade of the DIR and SD. Note, there
1284 should be some way to turn off timing. I'm not sure
1285 times are in Bacula units.
1286 kes Apply Eric's batch-insert patch.
1288 kes Update projects list.
1290 kes Implement Include/Exclude file lists in FD as dlists using
1291 the new dlistString class. This permits efficiently having
1292 large include/exclude lists and completes project Item 25.
1293 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1294 console is authorized to cancel the job. This fixes bug
1296 kes Modify SD so that the VolCatJobs medium record is updated
1297 at the beginning of a Job rather than the end. This
1298 fixes bug #775 where exceeding MaxVolJobs caused jobs
1300 kes Added a mutex around getting and setting Volume information
1301 so that multiple simultaneous jobs will single thread.
1303 Switch to using Subversion
1304 kes Remove src/pygtk-console/ from configure
1306 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1307 plus the entrypoints.
1308 kes Apply patch supplied that corrects debug print
1309 in canceling jobs for max run time. Supplied as
1310 part of bug #621, which was previously fixed.
1312 kes Test on job_canceled() and sd_msg_thread_done inside
1313 loop starting the message thread to avoid a race condition.
1315 kes Remove rl_catch_signal from console.c as it conflicted
1316 with the header definition. Fixes bug #765.
1317 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1319 kes Clarify some stored/acquire messages to indicate if the
1320 problem is with read or append.
1322 kes Fix memory leak with storage ids in cats/sql_get.c
1323 kes Terminate watchdog earlier to avoid reference to released
1324 memory -- reported by Jason Austin.
1325 kes Move closing the database from jobq.c to the director daemon
1326 termination routine. This fixes memory leaks for shadow jobs
1327 (i.e. migration jobs).
1328 kes Free up the unique jobid chain items in migrate.c. This fixes
1329 a memory leak problem.
1330 kes Convert some ugly looking for statements to use foreach_alist
1331 in findlib/find.c. This will facilitate converting the structures
1332 to use dlist (for large include/exclude lists).
1333 kes Fix a bug in the btree.c and btree.h routines, then rename them
1334 rblist and add them to be built in src/lib. Include some new
1335 methods written by Rudolf Cejka that make the code more readable
1336 (hides some of the ugly casting).
1337 kes Add set_next() and set_prev() methods which make the code much more
1338 readable. Also add a new dlistString class that facilitates storing
1339 strings in dlists. To be used in the large include/exclude lists.
1340 kes Make some trivial modifications to lib/tree.h that use rblist
1341 rather than dlist for storing the tree links. This was suggested
1342 by Rudolf Cejka. The result of this is that the restore tree now
1343 uses red-black binary trees rather than simple linked lists. This
1344 should give rather dramatic speed improvements for directories
1345 contining large numbers of directories/files (more than 10000).
1347 kes Fix maxruntime bug #621.
1349 ebl Implement the include JobID in spool file name project.
1350 kes Reorder projects file in order determined by Jan 2007 vote.
1351 kes Implement item #12 on project list -- quick release of FD by
1353 kes Fix open of SQLite3 db where user does not have write permission
1354 so that DIR does not crash. Fixes bug #761.
1356 kes Add back missing @ in Win32 Makefile.
1357 kes Change 'Device not configured to autolabel' from INFO
1359 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1360 which should restart an indefinite # of times.
1361 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1362 other DIR specifications.
1364 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1365 Fix path quoting in SQLite scripts.
1366 Fix problems with SHGetFolderPath.
1368 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1370 kes Fix Job restart on error bug that promotes an Inc to a Full
1371 backup. This should fix bug #755.
1372 kes Add qt-console and first cut of code.
1376 kes Fix Bacula->Documentation link on Win32 to point to index.html
1377 instead of bacula.html. Fixed bug #750.
1378 kes Return JobId in db_get_job_record() when JobId==0. This should
1380 kes Do not release source pointers when restarting a failed job.
1382 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1383 This *should* fix bug #747.
1384 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1387 kes Modify USTORE constructor to set an empty store_source string,
1388 and don't copy the store_source string in a cancel. Hopefully
1389 this will fix Arno's seg fault, bug #744.
1390 kes Add back code to disable conio in configure. Fixes bug #743.
1391 kes Correct the Options scanner in the FD to correctly handle
1392 SHA1 option, which was eating the next option. Reported by
1394 kes Add code to indicate when the SD is spooling, spool wait, and
1395 despooling as requested by Alan Brown.
1397 Version 2.0.0 released: 4 January 2007