1 Technical notes on version 2.3
5 kes Skip leading | when lex input comes from a pipe as suggested
6 by Michael Stapelberg <michael@stapelberg.de>.
8 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
9 Nerijus Baliunas <nerijus@users.sourceforge.net>
11 kes Implement Plugin Directory and plugin events.
13 kes Implement a security enhancement: TLS authentication but no
14 encryption. Enabled by setting 'TLS Authentication = yes'.
15 Note when this is on, TLS encryption is turned OFF!
17 kes This patch corrects a problem where the maximum concurrent storage
18 jobs counter gets out of sync during restore jobs causing jobs to
19 'wait on max Storage jobs'. This patch fixes bug #1009.
21 kes This patch fixes bcopy so that it produces correct Volumes.
23 kes This patch eliminates spurious output to the console during a VerifyVolume
24 job that contains encrypted data. It fixes bug #1024.
26 kes This patch prevents the 'status dir' command from trying to use a scratch
27 volume and possibly moving it from one pool to another. This patch fixes
30 kes Add new include to postgresql.c suggested by Marc Cousins so
31 that it compiles correctly with pgre version 8.3.
33 kes Fix --archivedir addition to configure. Replace it with
34 --with-archivedir in configure.in This fixes the regression
36 kes This patch fixes bug #1012 where the job is canceled because
37 of Max Run Time exceeded when the job has not yet started.
39 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
40 one 'part' to write. Instead of each part being stored on disk,
41 written to DVD, then deleted from disk, all parts are written to disk,
42 and only the last is written and deleted from disk.
43 kes This patch fixes the status command to include the formating string for
44 JS_AttrInsterting. It fixes bug #1021.
45 kes This patch should fix the Mac OS X build problem on the latest
46 Darwin, where sys/types.h was not included correctly (apparently
47 due to a change in the Mac headers). The solution was to explicitly
48 ensure that it is defined for the ./configure.
49 This patch also has a rebuild of configure that includes the Debian
50 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
51 kes This patch should ensure that queued messages to the console are
52 displayed as soon as possible. It should fix bug 1007, but has been
55 kes This patch fixes the infinite loop when trying to increase the
56 maximum number of volumes in a Pool during the add command.
57 This patch fixes bug #1008.
61 db Remove extra data on estimate command in joblist for bat.
63 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
64 really change anything, but is the beginning of doing it *right*.
65 To do it completely right the LastWritten date must be passed to
66 the SD, but it is not yet done.
67 kes Minor tweaks to some bat restore SQL.
68 kes This patch fixes bug #1003 where putting the message output from
69 a Verify job into the catalog results in a recursive loop. The problem
70 seems to show up only with postgresql (to be verified).
71 kes Correct %x to %p in postgresql debug statement.
73 kes Fix bug #942 where lots of emails where generated when the heartbeat
74 interval was low and Bacula wanted a different tape from the one in
77 ebl Add new SD despooling attributes and Dir inserting attributes
78 job status codes in the catalog (Status table).
80 ebl Use qmake-qt4 instead of qmake when available (debian system).
82 kes Add a security warning to src/cats/make_catalog_backup.in indicating
83 that passing the password via the command line (arg 3) is insecure.
84 This responds to bug #990 (it doesn't fix it).
86 kes Set default debug_level to zero. This corrects bugs #991 and #993.
87 kes Fix a crash in bat when it cannot connect to the Director for example
88 if the Director is not running.
89 kes Remove redundant INDEX (JobId) from File table in the trunk.
91 kes Make explicit exception to GPL in LICENSE to permit linking
92 the Win32 FD with Microsoft VSS code.
93 kes Apply the Solaris package patch from
94 Masopust, Christian <christian.masopust@siemens.com>
95 kes Apply the patch to optionally add a timestamp in the debug output
96 submitted by Mariusz Czulada <manieq@wp.eu>.
98 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
99 backend (sql_strerror). Fixes bug #989
101 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
102 It applied with no problems.
103 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
105 kes Redirect stderror to stdin on mt status command in mtx-changer.in
106 since the status is returned on stderr on Solaris.
107 kes Activate Close button on tray-monitor window. This fixes
109 kes Check for NULL item in parse_conf.c before calling it. In the
110 case of Device, there is no item and this caused a seg fault when
111 Device appears in the conf file.
112 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
113 avoids pulling in config.h multiple times in some new code.
115 kes Fix spurious warning message printed when creating a volume with
116 a LabelFormat. This fixes bug #976.
118 Release Version 2.2.5
120 kes Add JobId in place of Job name in all the Jmsg() output.
121 kes Correct the APP_DESC for the Win32 storage service (remove an e).
123 kes Make maxvol-test and new more strict maxvol2-test work.
124 kes Print JobId in all Jmsg() job output.
126 kes Add new SD despooling attributes and Dir inserting attributes
127 job status codes. This fixes bug 961.
128 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
130 kes Fix doc issue. This fixes bug #963.
131 kes Fix listing performance problems in bat. Pointed out by
133 kes Remove old debug code.
134 kes Fix bat code that tests for Win32. This should fix bug #968
135 kes Query 5 list wrong Vol after migration. This fixes bug #960
137 ebl Fix #969 where user can't change Replace option in restore menu.
139 kes Save jcr in thread specific data (tsd) for each thread.
140 kes Make Dmsg() print JobId as -%u.
141 kes Make Jmsg, Emsg, and others automatically pickup the jobid
142 for the thread if it exists.
143 kes Remove old reservation debug jid code.
144 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
145 ebl Add an option that permit to specify spool size in job
146 definition. (Applying patches/testing/spoolsize_per_job.patch).
147 You must upgrade SD and DIR at the same time.
148 dvl Add new configuration item --archivedir
149 dvl Adjust regression tests to use tmp not /tmp. This will allow
150 multiple concurrent runs of the regression tests.
152 kes Fix race condition that drops final block written to volume.
153 This happens in rare cases with multiple simultaneous jobs
154 when the Volume fills. This fixes bug #964. May be related
155 to bug #935 and possibly #903.
156 kes Eliminate more strerror() and replace with bstrerror().
157 kes Remove BSD getopt and replace with unrestricted IBM version.
158 kes Fix Win32 build for changed calling sequences.
159 kes More tweaks to the mount volume routines to get everything
160 right. Changed variable name from find to have_vol, which is
161 much easier to understand.
162 kes Enhance btimer debug code.
164 kes Fix FD->SD authorization failure, which was due to spurious
165 wakeups from a pthread_cond_timedwait(). Simply check the
166 predicate before continuing. This fixes bug #953.
167 kes Add const char where needed (more to do). Remove temp debug code.
169 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
170 kes Don't overwrite error message in check_tables_version.
172 kes Unlock batch insert tables with same calls used elsewhere.
173 kes Allow starting 59 jobs a second.
174 kes Make SD session key more random.
175 kes Add retry for SQLite opening db if it fails. Probably helps
177 kes Suppress extra error messages during batch insert failure.
179 kes Add jcr to timer packets so if killed message can be sent to job.
180 kes Add JobId to all Dmsg() output.
181 kes Put some FD auth code on dbglvl rather than fixed.
182 kes Return insert attributes error message in db msg buffer to avoid
183 false error messages. Helps fix bug #966.
184 kes Separate batch init error messages. Probably helps fix bug #966.
185 kes Make SD code that contructs attribute insert check string lengths
187 kes If Dir gets an error during inserting attributes, cancel SD.
188 This reduces unnecessary error messages.
190 kes Correct search boolean for getting Volume info
191 ebl Cleanup batch insert code. Probably fixes bug #965.
192 kes Back out one small change to the reservation system (reserving a volume).
193 kes Rework how a Volume is mounted. It is now much more intelligent and
194 will always attempt to use any mounted volume if possible and reduces
195 calls to the Director asking about volumes.
197 kes Turn off some code when batch insert not enabled.
198 kes Edit FD name in connect error messages.
199 kes Rework the reservation system to take into account that the Director
200 might give us a Volume that is different from the current one being
201 used, and to ensure that we don't exceed Maximum Volume Jobs.
202 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
203 fatal error with multiple jobs running'
204 kes Add more debug code in reservation system.
205 kes Implement maxvol-test to check bug #947.
207 kes Add code to handle tray monitor separated from Win32 FD.
208 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
210 kes Add missed return in fixing verify bug -- trunk only.
211 ebl Fix a command parser issue causing a director segfault.
212 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
214 kes Increase the max block size to 4MB fixes bug #957.
215 kes ERABT if user sets min block size > max block size. Fixes bug #956.
216 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
217 is not properly mounted (recognized) during a poll.
218 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
219 Job that has differences reports Verify OK.
220 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
222 ebl Add an option to operate on all pools with update vol parameters.
223 This complete the project 20. Patch from Nigel Stepp.
224 ebl Add history support to bconsole when using readline.
225 Using Ctrl-D to exit doesn't update .bconsole_history
226 kes Modify new volume algorithm to use max MediaId for generating next
227 volume number rather than the count of Volumes. This should essentially
228 eliminate the failure rate if some volumes were deleted. Bug #921.
229 kes Begin implemention of Optimize Job Scheduling.
230 kes Implement restore callback that Dirk and I agreed on for bat
231 restore. This fixes bug #928. Restore of backup of zero files fails.
232 kes Fix SQL Catalog logging which broke with new db_escape_string
235 Release Version 2.2.4
237 kes Fix bacula_cats.def for new db_escape_string().
238 kes Increase size of name string when FD making connection to SD.
239 May fix bug #953. FD->SD connection failure.
241 kes Add code to help Dan debug 2drive-incremental-2disk test.
242 kes Add code to try to fix bug #908.
243 kes Add waits to multiple exit detection code to try to force pid
244 file to always be deleted.
245 kes Restore good dev.tar.gz to rescue set appropriate binary property.
247 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
248 trying to switch drives by checking for blocking before unblocking.
250 kes Cancel storage daemon in all cases where FD reports error. This
251 should fix virtually all cases of bug #920.
252 kes Fix db_escape_string() for MySQL which did not compile.
254 kes Fix error message that was clobbered when Dir tells SD it does not
255 have write permission on Volume. This should fix a minor point
256 in bug #942, but not the main problem.
257 kes Add code to cancel job in SD if FD connection fails. This should
259 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
260 dvl Pass jcr and db into db_escape_string() to enable better escaping
262 kes Fix migration code to get correct Volume name with multiple volumes
263 by skipping |. Fixes bug #936.
264 kes Implement patch supplied by Landon to fix bug #944 where using
265 TLS with bconsole uses 99+% of the CPU.
266 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
268 kes Move patches into patches directory.
270 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
273 ebl Using 'm' in bconsole will show messages like before,
274 and not memory usage.
275 kes Fix bug #935, and probably also bug #903 where files were not
276 restored. MediaId was not properly set in JobMedia record after
279 kes Suppress chown and chmod error messages if the FD is not running
282 kes Apply Martin Simmons' patch that should turn off the new API usage
283 when batch insert is turned off allowing building on older
285 kes Add ./configure search in qwt-qt4 for qwt package
287 kes Bacula is now free of 3rd party GPL copyrighted code!
289 kes Add guid_to_name.c/h which replace idcache.
290 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
292 ebl Detect if new PosgreSQL batch insert API is present.
293 kes Correct incorrect mempool call causing Director crash. Occurs on
294 systems without va_copy().
295 sb Update spec files for 2.2.1 release
297 kes Fix memory pool call in ua_output.c. bug #934.
298 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
299 Add test program to fnmatch.c
301 kes Integrate patch to README.vc8 from
302 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
303 edit it to get it into Unix patch format.
304 kes Implement mkpath.c to replace old FSF makepath.c
306 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
308 Release Version 2.2.1
310 kes Update POTFILES.in
311 kes Cleanup a few underquoted AC_DEFUNs in configure
312 kes Apply patch from Martin Simmons that adds a test for va_copy to
315 kes Fix bug #921 by increasing the number of tries to create a new volume
317 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
318 can be called multiple times. Implement a version for machines
319 without va_copy() that gets a big buffer.
321 kes Integrate more portable zone offset code into bsmtp.c
322 Submitted by Attila Fülöp.
324 kes Fix bad SD->FD return status reported by
325 (James Harper) <james.harper@bendigoit.com.au>
326 ebl Fix a bug in read_close_session which return random status
327 thanks to James Harper
329 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
330 and directory names during restore of single file/directories.
331 kes Add sanity checks to .sql command when string is empty. Hopefully
332 that will resolve Dirks Director crash.
334 kes Apply patch submitted by Martin Simmons that corrects a seg fault
335 in the bsmtp chat subroutine when debug is >= 10.
337 kes Fix Director crash when running bat SQL queries.
338 kes Add David's notes on Item 8: Copy pools.
340 kes Rework projects file to be current and ready for a vote.
341 kes Enhance lex scanner error message.
343 kes Tweak LICENSE file to mention BSD code.
344 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
345 if specified on the ./configure.
346 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
347 This class is intended to allow us to open a second bsock to the
348 Director while in the restore subdialog.
350 kes Fix configure to create bat Makefile before creating dependencies.
351 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
352 kes Add a tooltip to the tray monitor.
353 dvl Set the Director's PID file before dropping privs. This fixes
356 kes Update AUTHORs file
357 kes Increase the default max concurrent jobs to 20 in FD and SD to
358 correspond with the default .conf files.
359 kes Rewrite the Win32 service routines. This eliminates the 3 copies
360 some different, of the same file created by RN when porting the
362 kes Rearrange some of the Win32 directories and the placement of the files
364 kes Set DEVELOPER flag in version.h
366 ========================================================================
367 Release Version 2.2.0
369 kes Apply a second doc patch from Marc.
370 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
371 improves the tips section that discusses how to setup multiple
374 kes Update bat README file.
375 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
376 corrects a typo in the Recycle status check in db_find_next_volume().
377 This will probably fix a number of annoying problems with multiple
379 kes Modify most of dird/msgchan.c to use bsock class calls rather than
380 bnet calls -- no functionality change.
382 kes Modify the Verify output to specify if files are missing on
383 the Volume(s) or disk. Fixes confusion in bug #916.
384 kes When more than one Volume is read in a migration job, the last
385 Volume bytes reported are from the last read volume rather than
386 the last written volume. Fixed. This fixes bug #910.
387 kes Fix display of Recycle flag after update volume=foo recycle=yes.
388 It previously printed New Recyle flag is: no. This fixes bug
391 kes Correct seg fault when switching tape drives during restore.
392 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
393 be used until after 2.2.0 release.
395 kes Remove fnmatch() in SD that permitted wild card specifications.
398 kes Fix %g in filename returned by SQL for browse tree reported by
400 kes Fix configure so that it puts config.out in the cwd rather than
402 kes Attempt to fix the locking problem reported by Eric in bug #906.
403 kes Make berrno class to leave errno unchanged after constructor call.
404 kes Make bnet_server use the heap rather than the stack to allocate
405 its socket fd pointers to avoid a crash at termination. Problem
406 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
408 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
409 and putting it in depkgs-qt along with Qt4.3.
411 kes Rework code in acquire.c that switches drives for reading when
412 the Media Type does not match. This should fix bug #906
414 ebl Fix a director segfault during job setup #907
415 kes Correct seg fault in postgresql when first operation returns no
416 rows. Fixes Dirks File browser problem seg fault with bat.
418 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
419 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
422 kes Implement PopUp YES/NO dialog for bat.
424 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
426 kes Correct RunScript to terminate job in FD on failure.
427 kes Change abort_on_error and AbortJobOnError to fail_on_error
428 and FailJobOnError in RunScripts.
429 kes Minor tweaks of code formating in RunScripts, principally to
430 avoid depassing 80 columns.
432 kes Eliminate one #ifdef Win32 in bsmtp
433 kes Implement grow tool to grow a file for testing very large databases.
434 kes Add big-vol-test to test Bacula seeking with > 5GB.
437 kes Modify find_next_volume() to return all values in Media record.
438 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
442 kes Update Release notes
444 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
445 Warning, in previous beta version, all media get from scratch keep their
448 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
449 This should fix bug #842. Made a note to look at removing the temp
450 files at the end of the install.
451 kes Add ability to mount and unmount a file device providing it is
452 marked as being removable and has the appropriate mount and unmount
453 commands defined in the Device resource. This fixes bug #830.
454 kes When applying a storage override, release all previous storage
455 definitions rather than just prepending the new storage.
456 This should prevent a good deal of confusion.
458 kes Implement ./configure search for qwt libraries.
460 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
461 Win32 FD. This should fix bug #893.
462 kes Remove an unnecessary beep in Win32 init code.
463 kes Update copyright dates in Win32 executable about boxes.
464 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
465 code with a BSD getopt.c and getopt.h.
466 kes Remove sched.h from the Win32 compat directory -- not used.
467 kes Remove the Exit menu item from the Win32 tray monitor. If you really
468 need to shut it down, do it through the services panel or the command
470 kes Remove some inappropriate Bacula FSFE copyrights.
471 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
472 kes Fix regress config non-portable test as pointed out by
473 Florian Heigl <florian.heigl@gmail.com>
474 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
475 as pointed out by Florian Heigl <florian.heigl@gmail.com>
477 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
478 Reported by Frank Sweetser.
482 kes Fix client-only build.
483 kes Integrate client-only fixes for bsys (initgroups) and conio from
484 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
485 kes Make arguments to get_scratch_volume() in same order as other
487 kes Rework the prune_volumes() subroutine so that after purging and
488 no volume found in desired pool, it will check for a scratch
489 volume. This prevents recycling the whole scratch pool.
490 kes Add code to status storage to print boffset_t (largefile support).
492 kes Move qwt (Graphics libarary for Qt4) to depkgs.
493 kes You now need a --with-qwt=<dir> to be able to build bat.
494 kes Update src/win32/cats/bacula_cats.def to include the new
495 db_get_query_dbids() call on Win32.
497 kes Correct a problem when selecting a scratch volume and moving
498 it to another pool that lost some columns.
499 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
500 kes Enhance Autochanger error messages to include Volume and device name.
501 kes Rework prune_volumes() code to take account of InChanger flag,
502 and to handle recycling volumes going to the Scratch pool and
503 current pool because the RecyclePool directive.
504 kes Implement a better and more efficient db_get_query_dbids() to
505 handle creating and passing back a list of DBIds.
509 kes Start work on new more efficient DBId subroutine. First use
510 will be for recycling volume to Scratch inchanger.
511 kes Increase number of JobIds in pruning from 1000 to 10000.
512 This to be replaced by above routine.
513 kes Begin implementation of building Qt4 on Win32.
514 kes Correct typo in fix I added for bad TLS shutdown.
515 kes Pull 2.0.3 patches into patches directory.
516 kes Update Release notes. Include qt-console in line count.
517 kes Update Projects file.
519 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
520 bug in migration code where a job that spanned two volumes
523 kes Implement new BST_DESPOOLING blocked state. Change from locking
524 during despooling in SD to blocking. This means that other threads
525 can work with the device structure, in particular the reservations
526 system while despooling.
528 kes Fix return in reservation message queue that missed clearing
529 the jcr lock (implemented 26Jun07 below).
530 kes Rename a number of dev methods to make locking function names
532 kes Document locking in lock.c. Move lock structures to new file
535 kes Move reservations message lock to lock jcr only this
537 kes Move main SD locking code into lock.c (new file).
538 kes Update Win32 build to include lock.c
542 kes Dirk committed the qwt library code for drawing graphs in bat.
543 kes Tweak install of qwt so that it is integrated with ./configure.
545 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
546 out by Eric (my typo).
547 ebl Fix configure.in to get batch mode enable
548 kes Return correct string from authenticate.cpp in bat when connecting
550 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
551 spurious line drops when using TLS.
552 kes Do not file reparse points when restoring a file that already
555 kes Implement Windows reparse points -- similar to directories, but
556 we do not descend into it. This is a first cut. They seem to
557 be backed up, but restore is not yet tested.
558 kes Remove restore_blocking in tls code when shutting a socket to leave
559 it in blocking mode. Hopefully this will fix the encryption bug
560 reported by Frank Sweetser.
561 kes When opening a file for backup, tell the OS that we are going to
562 read it sequentially -- optimization.
563 kes Change variable names in authenticate_director() to not conflict
564 with member names in bat. Caused great confusion with compiler,
567 kes Queue openssl error messages in case of comm problem.
568 kes Do shutdown() call if socket terminated.
569 kes Remove some duplicated code in tls.c
570 kes Move more of the bsock member variables into private and access
572 kes Add Frank Sweetser's tls-test to the regression suite.
574 kes Add Swedish sv.po file
576 kes Don't print clock skew message in FD if less than 3 seconds diff.
577 kes Add a bit of VSS info to status client.
578 kes Implement a first cut of Vista VSS, using Win2003 code.
582 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
583 loaded tape but uses first drive).
584 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
585 This was indeed a Win32 issue.
587 kes Simplify search of autochanger for in-use Volume.
588 kes Fix exit condition of check for in-use volume. kes Remove
589 inappropriate my_postgresql_free_result() in db_close()
591 kes Fix bad return in FD when encryption signature not found.
592 Probably caused a crash.
593 kes Inhibit missing encryption signature error messages for
594 file types where no signature computed.
595 kes Correct inverted check on autochanger in reservation system.
596 kes Tweak debug code in autochanger reservation.
598 kes Add some additional locking in the cats directory in subroutines
599 that modify packet variables called from batch insert.
600 kes Rework how dcrs are allocated. new_dcr() can now be called
601 with an existing pointer, and it will simply clean it up.
602 This allows the reservation system to test various different
603 devices, and will permit easy device changes.
604 kes A bunch of changes all over to handle new new_dcr() calling
606 kes Work more on the Volume management in the SD. Remember Volumes
607 for tape drives and for autochangers (even virtual disk changers).
608 kes When looking at the Volume list to reserve a drive, handle
609 autochanger names correctly by interating through the changer
610 devices. Also call the Director to see if a Volume is suitable
612 kes Fix some bugs in bscan. Make sure all media records are written.
613 Make sure that valid JobMedia records are written for disk files.
614 Previously they were completely wrong.
615 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
616 that the URLs don't change and so that the developers will all
617 work off the same copy. Rebuild from scrach.
618 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
622 kes Fix seg fault in FD from incorrect digest size.
623 kes Fix argument to non-OpenSSL crypto.c subroutine.
627 kes Remove a few malloc()s from the encryption code.
628 kes Use the class calls to bsock in filed/backup.c and restore.c in
629 place of the old bnet_xxx code.
630 kes Implement code that does an on the fly calculation of the
631 signing digest during restore of encrypted files. It makes
632 a best guess at the algorithm, and if it is not correct, will
633 then revert to the old code which reads the file after it is
635 kes Implement at least one missing crypto stream in stream_to_ascii()
636 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
637 #877 where a reload with bad syntax causes Dir to exit.
639 Cut: 2.1.14 beta (not released)
641 kes Do not free a volume on a tape drive until another volume is
642 mounted and read, or the autochanger unloads the volume.
643 This should help the SD re-use volumes that are already mounted,
644 and should fix bug #886.
645 kes Apply patch from user brettedgar that allows gnome2-console include
646 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
647 kes Apply patch from Lucien Weller that fixes day of week calculation
648 because of DST flag problem. Fixes bug #887.
650 kes Move find_next_appendable_volume() to after acquiring a valid device
651 in reserve.c. This fixes bug #864 -- confirmed by reporter.
653 kes Unable to reproduce bug 872. However added additional testing for
655 kes Bug #874 resolved by documenting SQLite limitations.
656 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
657 kes Bug #881 resolved by removing typo in mtx-changer script.
658 kes Made Frank Sweetser's wiki the official Bacula wiki with his
659 approval. Added a link to the wiki on the web page, and implemented
660 a backup from http://paramount.ind.wpi.edu
662 kes Fix update allfrompool to pass pool name.
664 kes Convert to pure GPL v2 license.
665 kes Fix sscanf problems reported by Peter Buschman that caused
666 a bus error on Solaris.
667 kes Rework (simplify) the select prompt in bat.
668 kes Move get_jobid_from_tid() into lib and create a
670 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
671 should definitely fix the problem of lost error messages in the
673 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
674 kes Eliminate tcpd.h from the project. Enclose the #include from the
675 library with extern C ...
676 kes Add print of signal name when a signal is trapped.
680 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
682 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
683 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
684 makes SQLit3 run 30 times faster, though a bit less safe.
685 kes Implement --with-batch-insert in configure and detection of thread
686 safe libraries. It is on by default, but turned off if no thread
687 safe library (e.g. SQLite 2) is available.
689 kes Fix Bacula PostgreSQL buffer overruns.
690 kes Do better checking for NULL results returned from PostgreSQL;
691 implement retry for failed queries; clear results buffer after
692 failed query. Hopefully this will correct the PostgreSQL failures.
694 kes Implement algorithm to handle only one appendable volume with
695 Prefer Mounted Volumes = no.
696 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
697 returned from a query.
698 kes Make volume lock recursive.
699 kes Implement an additional volume reservation algorithm that
700 starts by considering all reserved volumes then uses the
701 old brute force algorithm of searching the resources to
702 find a suitable device.
703 kes Add new reservations debug code and refine the old code.
704 kes Update the win32/dll/bacula.defs file.
706 kes Tweak reservations algorithm to permit a few more cases, i.e.
707 volume reserved, but on different drive, ...
708 kes Enhance SD status to include Pool and Media Type for drive in a
709 more readable format (a bit longer).
710 kes Fix PostgreSQL double free.
712 kes Minor refactoring of restore decryption code.
713 kes Add code to smartall.c to detect double free of a buffer.
715 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
716 so that bsmtp will create a correct email address (mailbox only).
717 kes Modify 'memory' command so that the buffers are listed as 'In use'
718 to avoid confusion with Orphaned buffers.
719 kes I reworked the OpenSSL include/lib flags to be handled in
720 the standard Bacula way, which should fix bug #863 concerning
721 non-standard OpenSSL libraries.
723 kes Implement Help Browser window for bat.
724 kes Fix reload bug that reset StorageId to zero.
726 kes Fix TLS #ifdefing when TLS turned off.
727 kes Ensure that when labelling a tape with Slot=0 that InChanger
729 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
731 kes Add StartTime to final uar_sel_jobid_temp query so that we can
732 add DISTINCT (required by PostgreSQL).
733 kes Implement BSOCK authenticate_director() method. Eventually will
734 authenicate all daemons.
735 kes Move several more functions into the BSOCK class.
737 kes Add code to tell the OS that we no longer need a cached
738 file that we were reading. In findlib/bfile.c. Also,
739 only cache files that we are reading. Thanks to
740 Tobias Oetiker <tobi@oetiker.ch> for the idea.
741 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
742 kes Implement script to automatically generate cats and dll .def
744 kes Update README.mingw32 to include new .def file generation.
745 kes Correct typo in UTF-8 error message as reported by:
746 jhernandez <julianhernandez@gmail.com>
747 kes Add additional sm_check() code on debug level 1.
748 kes Set default debug level to 1.
749 kes Trap SIGABRT in attempt to get traceback.
751 kes Reduce bat connect timeout from 30 to 15 seconds.
752 kes More restructuring and implementing BSOCK class in place of
754 kes Remove a few unnecessary malloc() tests in crypto code.
755 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
756 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
757 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
759 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
761 kes Fix Verify InitCatalog. The attributes were not pointing to the
762 correct saved location.
763 kes Implement message callback so that GUI is sure to get all
764 daemon messages. Currently displayed in a dialog in bat.
765 kes Ignore SIGUSR2 (Bacula timer) in bat.
766 kes Apply regress patch from bug #859 to allow regress to work
767 with Solaris compiler.
769 kes Begin adding TLS support to bat.
770 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
771 clean up lex.c and make it more readable.
773 kes Move more bnet functions into the BSOCK class.
774 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
775 kes Complete change of berrno strerror() method to bstrerror()
779 kes Cleanup incorrect email addresses in bsmtp.
780 kes Make bat display initial messages rather than discard them.
782 kes First cut of adding .mod to the run command.
783 kes Implement auto display of messages in bat.
784 kes Enhanced preferences to allow all Bacula output to be
787 kes Try to make bsmtp date routines more generic.
788 kes Fixed bug #856 autochanger documentation.
789 kes Rework bsmtp date editing for Win32. This fixes bug #854.
790 kes Add new cats entry point so Win32 builds.
792 kes Attempt to fix bsmtp date editing on OSes without %z editing.
794 kes Do better checking for the MySQL 64 bit libraries looking for both
795 .a and .so libraries.
796 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
797 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
798 kes Require the thread safe version of MySQL during configure. Thanks
799 to Andre Noll for pointing this out.
800 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
801 continuing in migration code.
802 kes Apply implementation of tray-monitor font derived from gnome-console
803 submitted by Andreas Piesk <a.piesk@gmx.net>
805 kes Eliminate important memory loss in SQLite
806 kes Fixed the batch insert MySQL thread specific data that was not
807 being freed. See cats/mysql.c:db_thread_cleanup().
808 kes Fix restore before command.
809 kes Convert old hdr.name to name() in a few places.
810 kes Implement update jobid command.
811 kes Return all time_t dates in db_get_job_record()
812 kes Stop watchdog in SD earlier.
813 kes Put Pool just after Storage in please mount message.
814 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
817 kes Update the po files.
818 kes Fix Verify InitCatalog by making it cache attributes.
820 kes Change name bacula-bat to bat for man 1 page to correspond to
822 kes Check for client and store NULL pointers in status command. This
824 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
825 kes Fix sign extended editing of %p.
826 kes Clean out a little old #ifdefing in cats/mysql.c
828 kes If time diff between DIR and FD is more than 600 seconds convert
829 INFO message to WARNING.
830 kes Implement heap size display in status for all daemons.
831 kes Attempt to fix MySQL db open memory loss (not successfull).
832 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
833 kes Eliminate memory loss in MySQL (possibly other SQLs) during
834 Query. This looks like a MySQL but but by doing extra releases,
835 the memory goes away. This should fix bug #847.
837 kes When backup fails, cancel SD before waiting for sd termination.
838 kes If SD is waiting for FD to connect during cancel, wake up the
840 kes Fix fsf code so that errno is correctly reported.
841 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
843 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
844 so that Bacula doesn't later stumble into a seg fault.
845 kes Use the term Restore Client in the restore Job report.
846 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
847 the original job's FileSetId.
848 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
849 spooling in migration jobs. Not yet tested.
850 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
851 reading conf file from a pipe. However, do it with open_bpipe()
852 rather than popen. Not yet tested.
854 kes Fix an ugly bug where the VolCatBytes were getting updated
856 kes Implement bconsole memory command that prints current memory
857 usage, plus smartalloc dump.
858 kes Clarify some error messages in backup, admin, and migrate.
859 kes Shrink label dialog to smaller size.
860 kes Invert Cancel OK buttons on restore to be OK Cancel.
861 kes More strerror() to bstrerror() conversions.
863 kes Start implementing bstrerror() in place of strerror().
864 kes Stripping path -- seems to work.
866 kes Prevent door and port files from being restored (mostly
868 kes Free an unreleased buffer in compat code.
869 kes Change console Job name from *Console* to -Console- to eliminate
870 Win32 filename problems. Put Win32 path separator when creating
871 Console file. This fixes bug #846.
872 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
874 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
876 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
877 to force Win32 error message.
879 kes First cut strip path. The data should be passed to the FD,
880 but nothing is done with it yet.
881 kes Enhance the digest and signature routines in the crypto
882 library to accept a JCR and to use it to print error messages
883 so that they will go in the Job report rather than the daemon's
885 kes Simplify some of the verify signature code.
886 kes Simplify a few of the alternative returns in the signature
889 ebl Use only POSIX regex instead of GNU regex in breg.c for
890 File relocation. It fix broken freebsd compilation.
891 kes Convert all other Dir files to use new ua class message
893 kes Tentative fix for missing digest signature in bug 807.
894 kes Correct handle problem in new win32_ftruncate routine.
895 kes Convert ua_purge.c and ua_update.c to use new ua class
896 message routines for bat.
898 kes Correct incorrect installation of LICENSE in Win32 installer.
899 kes Display LICENSE at the beginning of the Win32 install.
900 kes Attempt to correct the need for the png files to be installed
902 kes Reapply my bat.conf install script in qt-console. I think I
903 editted bat.pro instead of bat.pro.in and it was lost.
904 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
905 the /var/lock/subsys for subsysdir. Also corrects typos in the
908 kes First cut update job.
909 kes Correct configure to include qmake of src/qt-console directory.
911 kes Make restore job yes/mod/no print in one command so GUI works.
912 kes First cut implementing backup and restore client.
913 kes Correct editing in Verify output that caused a seg fault.
915 kes Insure that bat.conf is not overwritten during installation.
916 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
917 while I was implementing migration in March 2006 !
919 ebl Cleanup file relocation, using char *RegexWhere instead of
920 char *where + bool where_use_regexp
921 kes Update some manpages and add bat manpage.
922 kes Make a first cut at converting bacula.spec.in for bwx-console
924 kes Apply patch from John Goerzen to add hostname as fourth argument
925 to make_catalog_backup script.
926 kes Fix typos I introduced into bsmtp.c
927 kes Make pm_strxxx() routines handle input of NULL pointer. This
928 is to protect from NULL pointers returned from SQL databases.
929 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
930 kes Add more debug to FIFO code -- fix fifo regression test.
932 kes Implement posix_fadvise in FD, and for reading spool files in SD.
933 kes Add thread timer to bnet_connect() to break from OS if wait time
936 kes Update Win32 build to include new files, new symbols, and
938 kes Implement socket level heartbeat (tcp_keepidle)
939 ebl Commit File relocation patch
940 kes Make bat have 'make install' target.
941 kes Warn during install if old gnome-console binary found.
942 kes Warn during install if old wx-console binary found.
943 kes Add -8 option to bsmtp command line to add content type utf-8.
944 Fixes bug #809. (Character coding problem in bsmtp).
945 kes If < is found in target (from, to, cc) then do not enclose the
946 target in < > in bsmtp. Fixes bug #772 (malformed address).
947 kes When printing certain items in dbcheck, stop after 300000.
948 Fixes bug #822. (dbcheck loops).
949 kes Incorrect status in Dir after waiting for mount with poll set.
952 kes Extend idea of Prefer Mounted Volumes to mean a volume about
954 kes Print waiting to reserve a device every 5 mins.
956 kes Don't call close_part in label.c if tape and relabel.
957 kes Don't free volume if busy in close() -- should help with
959 ebl Fix #824 RunScript bug (After script could be execute twice)
960 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
961 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
962 Add a regression script to test RunScript
964 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
967 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
968 deprecated. No additional bugs will be fixed, and they will be dropped
969 in a future release (probably 2.4.0).
970 kes Change name of wx-console to bwx-console to make it more Bacula
972 kes Change the name of gnome-console to bgnome-console to make it
975 kes Some time in March, a Feature Request with patch from Jorj Bauer
976 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
978 The ability for the director to validate a Client (FD) CN against
979 an arbitrary set of patterns rather than the hostname, with
980 A new 'TLS Allowed CN' set of directives which are implemented
981 in the Client resource. Then pattern matching is used in place
982 of hostname matching against the Certificate's CN. As an example, we
983 have certificates which (a) use a local CA, and (b) have a CN of the
985 kes Add new/changed entry points to Win32 build
986 kes Create unaccepted-projects for projects that are not accepted.
987 kes Simplify locking in the reservations system.
988 kes Add more debug code in reservations.
989 kes Make sure error condition on reserving a volume is handled correctly.
990 kes Correct handling of volume_in_use.
991 kes Correct handling of initializing a device.
992 kes Move handling of broadcasting releasing a device into release_device().
993 kes Correct attaching dcr to dev so that it is only done if device
994 is properly initiated.
996 kes Locking debug level tweaks in SD.
997 kes Tweak new Volume code.
999 kes Add exec external-command [wait-seconds] to bconsole. This
1000 executes the external-command. Note! normally external-command
1001 should be enclosed in double quotes.
1002 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1003 it should normally be off in a production system.
1005 kes Implement die command for SD so that we can force it to dump.
1006 kes Implement SD lock debug code.
1007 kes Implement new algorithm for keeping Volume list in SD. It
1008 is now owned by the device.
1010 kes Implement new code for freeing in use volumes that should
1011 resolve if not all, some of the problems of multiple drive
1012 tape conflicts described in bug 801.
1014 kes Fix gui/bacula-web/images files in svn.
1015 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1017 ebl Fix a bug in batch mode (in string escape)
1018 kes Correct migration prune SQL typo that crept in in a
1019 recent 2.1.x change.
1021 kes Move bnet_despool() into class in bsock.c
1022 kes Modify job report to include director name and Build OS.
1023 kes Move drop root privilege and check_catalog() before fork.
1024 kes Add update database scripts (version 9 to 10) to updatedb directory.
1026 ebl Check size and age of each file after its backup to see if
1027 it has changed during backup, if 'checkfilechanges' is set.
1028 The FD will do an extra check (stat(2)) after
1029 each file backup. mtime, ctime and size are compared with
1030 'before backup' information. If time or size mismatch, an
1031 error message will be generated. You must upgrade FD to use it.
1033 kes Make database name and user configurable
1034 --with-db-name=xxx --with-db-user=xxx
1035 kes Add back database type to message.c for debugging.
1037 kes Implement dir_sql() which issues an SQL query.
1038 kes Modify bat medialist to use dir_sql() and do some minor C++
1039 formatting as well as eliminating a number of pointers, simplifing
1042 kes Fix some of the mtx-changer grep commands for tape label readers.
1043 kes Convert a number of bsendmsg into the appropriate send/warning/error
1044 message class calls.
1045 kes Suppress the using database message in the .sql command.
1046 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1048 kes Add context menu for floating a window.
1049 kes Some minor cleanup and name changes in qt-console
1050 kes Add doing mt setblk 0 in Win32 mtx-changer.
1051 kes Apply Martin's bug fix to move definition of ENODATA for
1053 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1054 sqlite2 and sqlite3.
1056 kes More pruning cleanup.
1057 kes Turn on wait_for_drive by default in mtx-changer.
1058 kes Turn on Batch insert code by default as it now passes regression.
1059 kes Add ./configure --enable-bat to enable building of Bat.
1060 No install yet though.
1062 kes Implement a new .sql command for bat.
1063 kes Implement code to turn off pruning in obtaining the next volume.
1064 Pruning is turned off for the status dir command, but turned on
1065 for SD requests and for the list nextvolume command.
1067 kes Correct Qmsg() that was not updated correctly when committing a
1068 previous change (probably the recent TLS patch).
1070 kes Write new subroutine is_volume_purged() that explicitly checks
1071 if the Volume is purged, and if so marks it as such. This should
1072 resolve problems reported about needing to mount twice to recycle
1074 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1075 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1076 amount of duplicated code.
1077 kes Do volume pruning only for the Media Type desired (reduces pruning time
1078 if multiple Media Types are in the same pool).
1079 kes Implement more detailed info in the Job report for the Bacula version
1081 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1083 ebl Add bbatch tool to bench database and insert mode.
1084 Fix sql quote stuff in batch mode
1085 Fix sql stuff for mysql
1087 kes Correct problems with am/pm scheduling. Fixes bug #808.
1088 kes Implement new prunning code that prunes up to 1000 jobs at
1089 the same time. The same technique can be applied to a number
1090 of other prune/purge subroutines.
1091 kes Add an insanity check when starting a new tape job to ensure
1092 that the tape position has not been changed. If so fail the
1094 kes Fix Win32 build for dlls to add the folllowing:
1095 src/lib/bsock.c -- new file with new entry points
1096 src/lib/dlist.c -- new entry points
1097 src/cats/sql_create.c -- new entry point
1098 src/cats/sql_cmds.c -- new DATA item exported
1100 ebl batch mode cleanup bscan-test is ok now.
1101 kes Implement SD code to check length of disk volume before appending.
1103 kes Correct return status on db_batch... routines.
1104 kes Add call to db_write_batch_file_records() to migration code.
1105 ebl Fix AfterJob timing
1106 kes Move the checking of the database in initializion of the Director
1107 to after we drop privileges. This avoids the need for both root
1108 and bacula access to the DB.
1109 kes Correct a misplaced variable definition in src/filed/backup.c
1110 kes Correct how the new batch insert db_create_attributes_record()
1111 uses the arguments. Caused a seg fault in bscan.
1112 kes Implement lock() and unlock() methods in DEVICE class.
1113 Implement block() and set_block(xx) methods in DEVICE class.
1114 kes Modify bnet_connect() so that it uses time() to check for the
1115 wait time expiring (on some OSes, some system calls may not
1116 return immediately).
1117 kes Modify Verify to obtain the previous JobId when it is actually
1118 running rather than at schedule time (as it was in 1.38.x).
1119 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1121 kes When checking pid in pid file, continue running if the pid is
1122 the same as ours. This occurs on IRIX after a system crash.
1125 kes Extend new GUI API.
1126 kes Make the ua structure a class, and implement send_msg(),
1127 error_msg(), warning_msg(), and info_msg().
1129 kes Apply fix from for building wx-console on the Mac from
1131 kes Implement new select mechanism for GUI programs.
1132 kes Reorganize initialization of stackedWidgets in bat.
1134 kes Add updated nagios plugin supplied by Christian Masopust.
1136 kes More bat implementation.
1137 kes File migrate bug with Pool Occupancy using mediaid instead
1138 of jobids. Fixes bug #795.
1139 kes Fix orphaned buffers in filed backup and verify due to
1140 crypto buffers not freed during errors. Fixes bug #789.
1141 kes Extend new GUI api code to tree commands.
1142 kes Ensure that tree and dot commands check console ACLs.
1143 kes Permit marking directory with trailing slash.
1144 kes Allow 20 console connections (instead of only 10).
1146 kes Add smartctl call to bacula-sd.conf as an example of getting
1149 kes Modify jobq.c to let simultaneous restore jobs run. This may
1150 cause them to fail if they cannot get a drive.
1151 kes Add Client Connect Wait to Storage daemon to permit users to
1152 modify the time the SD waits for a FD connection.
1154 kes Correct virtual changer check which was backwards. This caused
1155 volumes to be unloaded into slots already occupied.
1157 kes Apply Command ACL filter to JobId list in restore command.
1158 kes Correct typeo in var.c patch.
1160 kes Don't let Bacula prune File or Job records for the current Job.
1161 kes Fix variable substitution pad + inc bug reported (with patch)
1164 kes Correct SQLite log table index as reported by Luca Berra.
1166 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1168 kes Begin implementing new comm signals for API.
1169 kes Fix a few places in lib/message.c where the open fd may
1171 kes Continue implementing lib/bsock.c (real class). Make jcr,
1172 who, host, and port private. There are new methods to access
1173 them for non-class use. This required touching a number of files.
1175 kes Add LANG=C to autoconf/randpass so it works with languages other
1176 than English. Fixes bug #788.
1178 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1180 You will not be able to generate Include/Exclude list any more.
1181 It will be fixed soon.
1182 If you want to use this, you can apply
1183 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1185 kes Restore of sockets created false error messages because Bacula
1186 no longer restores sockets, but the code was still trying to
1187 set the attributes on a non-existent file. Reported by a user.
1188 ebl finish RecyclePool feature
1189 Media will takes Pool.RecyclePool
1190 when moving from Scratch to a Pool or when user will do
1191 update volume=xxx frompool
1192 To use it, add RecyclePool = aPool to your Pool resource
1195 RecyclePool = Scratch
1199 kes Expand new BSOCK class adding signal() and new BNET signals.
1200 kes Begin enhancing the dot commands adding a new API function
1201 that returns more information and will make it easier
1202 to interface to the Director from a program.
1204 kes Make DEVICE fd private. Its new name is m_fd, and can be
1205 obtained with dev->fd() outside the class. This is the
1206 first of many DEVICE members to be made private.
1207 kes Implement Michael Renner's idea on having a virtual disk
1208 changer. I made some minor modifications (e.g. I did not
1209 implement the Virtual Changer directive, but simply set
1210 the Changer Command to an empty string.
1212 kes Implement a BSOCK send() method that writes the whole record
1213 in a single write() request rather than in two.
1214 ebl add update volume=xxx recyclepool=yyyy
1215 volume takes recyclepool from pool when using update volume=xxx from pool
1217 kes Fix encryption deblocking bug, which caused some restored files
1218 to be truncated. This fixes bug #763.
1219 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1220 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1222 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1223 ebl Use btime_t instead of uint64_t in media patch.
1225 kes Optimize the use of the database a bit in the Status dir command.
1226 Only open it when needed, ensure that if any previous database
1227 was opened, it is closed.
1229 kes Correct VolCatBytes bug from media patch.
1230 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1231 in the case of orphaned records.
1232 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1233 and File records in 300K chunks to be more efficient. This
1234 idea came from Juan Luis Frances (if I remember right).
1235 kes Apply Eric's scratch patch that moves a purged Volume to
1236 the RecyclePool. Question: how is RecyclePool set? what
1237 happens to the ScratchPool?
1238 kes Apply Eric's media patch that collects read/write media
1239 times as well as byte counts. This patch requires a
1240 simultaneous upgrade of the DIR and SD. Note, there
1241 should be some way to turn off timing. I'm not sure
1242 times are in Bacula units.
1243 kes Apply Eric's batch-insert patch.
1245 kes Update projects list.
1247 kes Implement Include/Exclude file lists in FD as dlists using
1248 the new dlistString class. This permits efficiently having
1249 large include/exclude lists and completes project Item 25.
1250 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1251 console is authorized to cancel the job. This fixes bug
1253 kes Modify SD so that the VolCatJobs medium record is updated
1254 at the beginning of a Job rather than the end. This
1255 fixes bug #775 where exceeding MaxVolJobs caused jobs
1257 kes Added a mutex around getting and setting Volume information
1258 so that multiple simultaneous jobs will single thread.
1260 Switch to using Subversion
1261 kes Remove src/pygtk-console/ from configure
1263 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1264 plus the entrypoints.
1265 kes Apply patch supplied that corrects debug print
1266 in canceling jobs for max run time. Supplied as
1267 part of bug #621, which was previously fixed.
1269 kes Test on job_canceled() and sd_msg_thread_done inside
1270 loop starting the message thread to avoid a race condition.
1272 kes Remove rl_catch_signal from console.c as it conflicted
1273 with the header definition. Fixes bug #765.
1274 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1276 kes Clarify some stored/acquire messages to indicate if the
1277 problem is with read or append.
1279 kes Fix memory leak with storage ids in cats/sql_get.c
1280 kes Terminate watchdog earlier to avoid reference to released
1281 memory -- reported by Jason Austin.
1282 kes Move closing the database from jobq.c to the director daemon
1283 termination routine. This fixes memory leaks for shadow jobs
1284 (i.e. migration jobs).
1285 kes Free up the unique jobid chain items in migrate.c. This fixes
1286 a memory leak problem.
1287 kes Convert some ugly looking for statements to use foreach_alist
1288 in findlib/find.c. This will facilitate converting the structures
1289 to use dlist (for large include/exclude lists).
1290 kes Fix a bug in the btree.c and btree.h routines, then rename them
1291 rblist and add them to be built in src/lib. Include some new
1292 methods written by Rudolf Cejka that make the code more readable
1293 (hides some of the ugly casting).
1294 kes Add set_next() and set_prev() methods which make the code much more
1295 readable. Also add a new dlistString class that facilitates storing
1296 strings in dlists. To be used in the large include/exclude lists.
1297 kes Make some trivial modifications to lib/tree.h that use rblist
1298 rather than dlist for storing the tree links. This was suggested
1299 by Rudolf Cejka. The result of this is that the restore tree now
1300 uses red-black binary trees rather than simple linked lists. This
1301 should give rather dramatic speed improvements for directories
1302 contining large numbers of directories/files (more than 10000).
1304 kes Fix maxruntime bug #621.
1306 ebl Implement the include JobID in spool file name project.
1307 kes Reorder projects file in order determined by Jan 2007 vote.
1308 kes Implement item #12 on project list -- quick release of FD by
1310 kes Fix open of SQLite3 db where user does not have write permission
1311 so that DIR does not crash. Fixes bug #761.
1313 kes Add back missing @ in Win32 Makefile.
1314 kes Change 'Device not configured to autolabel' from INFO
1316 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1317 which should restart an indefinite # of times.
1318 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1319 other DIR specifications.
1321 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1322 Fix path quoting in SQLite scripts.
1323 Fix problems with SHGetFolderPath.
1325 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1327 kes Fix Job restart on error bug that promotes an Inc to a Full
1328 backup. This should fix bug #755.
1329 kes Add qt-console and first cut of code.
1333 kes Fix Bacula->Documentation link on Win32 to point to index.html
1334 instead of bacula.html. Fixed bug #750.
1335 kes Return JobId in db_get_job_record() when JobId==0. This should
1337 kes Do not release source pointers when restarting a failed job.
1339 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1340 This *should* fix bug #747.
1341 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1344 kes Modify USTORE constructor to set an empty store_source string,
1345 and don't copy the store_source string in a cancel. Hopefully
1346 this will fix Arno's seg fault, bug #744.
1347 kes Add back code to disable conio in configure. Fixes bug #743.
1348 kes Correct the Options scanner in the FD to correctly handle
1349 SHA1 option, which was eating the next option. Reported by
1351 kes Add code to indicate when the SD is spooling, spool wait, and
1352 despooling as requested by Alan Brown.
1354 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob