1 Technical notes on version 2.3
5 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
7 kes Add DataDespooling and DataCommitting status (committing is
9 kes Finish implementation of new reservations code noted below.
11 kes Fix bsnprintf for float point numbers. I broke recently when
12 parameterizing some variables. This fixes bug #1036.
13 kes Undo recent reservations changes ... will apply them later
14 when they work better.
16 ebl Fixes #1034 which cause mysql to hang the connection after 8h
17 ebl Change default statistics target of filename.name and path.path
18 fields for PostgreSQL. This speeds lookup by indexes. Thanks
20 kes A few more tweaks to new reservation code. Make sure to clear
21 vol released flag when retaking volume. When reading label and
22 label is bad mark volume unused. When recycling, mark volume
23 unused so it can be renamed.
25 kes Fix reserve_volume() so it doesn't release a volume in use
26 (i.e. a volume entry not marked released). This should be
27 the last part needed to fix bug #1018.
29 kes Move Heartbeat documentation from Job to Director resource.
32 kes Fix existing switch drive SD code to call autochanger to release
33 any old volume. This must be done to keep the autochanger from
34 releasing subsequently newly reserved volumes in doing a close().
35 This should fix bug #1018.
36 kes Fail if attempting to get console input in batch mode. This
37 should help fail RunScript console commands that are incomplete.
38 kes First cut implementing switch_drive() in SD (not actually called).
40 kes Implement first cut running console commands in a RunScript.
42 ebl Fixes bug #1028 where "Selection Type" option was not usable
44 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
49 kes Add new free_tls() entry point so that Win32 builds.
50 kes Fix compile warning in src/lib/util.c
51 kes Fix entry point for edit_job_codes() so that Win32 builds.
52 kes Fix seg fault Frank Sweetser reports in regression testing
53 on his systems. The problem was that the original author of
54 bsnprintf.c did not take into account the side effects of
55 using ++x in the argument to a #define.
56 kes Make SD protocol backward compatible with version 2.2.x.
58 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
59 because Bacula no longer restores sockets.
60 ebl Always use ignorecase fileset option on win32 FD.
62 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
63 that implements double quoting include names in conf files,
64 and also allows piping input by having the first character
65 be a vertical bar (|).
66 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
67 that implement %f in RunScripts to pass the FileSet name.
68 kes Skip leading | when lex input comes from a pipe as suggested
69 by Michael Stapelberg <michael@stapelberg.de>.
71 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
72 Nerijus Baliunas <nerijus@users.sourceforge.net>
74 kes Implement Plugin Directory and plugin events.
76 kes Implement a security enhancement: TLS authentication but no
77 encryption. Enabled by setting 'TLS Authentication = yes'.
78 Note when this is on, TLS encryption is turned OFF!
80 kes This patch corrects a problem where the maximum concurrent storage
81 jobs counter gets out of sync during restore jobs causing jobs to
82 'wait on max Storage jobs'. This patch fixes bug #1009.
84 kes This patch fixes bcopy so that it produces correct Volumes.
86 kes This patch eliminates spurious output to the console during a VerifyVolume
87 job that contains encrypted data. It fixes bug #1024.
89 kes This patch prevents the 'status dir' command from trying to use a scratch
90 volume and possibly moving it from one pool to another. This patch fixes
93 kes Add new include to postgresql.c suggested by Marc Cousins so
94 that it compiles correctly with pgre version 8.3.
96 kes Fix --archivedir addition to configure. Replace it with
97 --with-archivedir in configure.in This fixes the regression
99 kes This patch fixes bug #1012 where the job is canceled because
100 of Max Run Time exceeded when the job has not yet started.
102 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
103 one 'part' to write. Instead of each part being stored on disk,
104 written to DVD, then deleted from disk, all parts are written to disk,
105 and only the last is written and deleted from disk.
106 kes This patch fixes the status command to include the formating string for
107 JS_AttrInsterting. It fixes bug #1021.
108 kes This patch should fix the Mac OS X build problem on the latest
109 Darwin, where sys/types.h was not included correctly (apparently
110 due to a change in the Mac headers). The solution was to explicitly
111 ensure that it is defined for the ./configure.
112 This patch also has a rebuild of configure that includes the Debian
113 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
114 kes This patch should ensure that queued messages to the console are
115 displayed as soon as possible. It should fix bug 1007, but has been
116 reported not to work.
118 kes This patch fixes the infinite loop when trying to increase the
119 maximum number of volumes in a Pool during the add command.
120 This patch fixes bug #1008.
122 Release Version 2.2.6
124 db Remove extra data on estimate command in joblist for bat.
126 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
127 really change anything, but is the beginning of doing it *right*.
128 To do it completely right the LastWritten date must be passed to
129 the SD, but it is not yet done.
130 kes Minor tweaks to some bat restore SQL.
131 kes This patch fixes bug #1003 where putting the message output from
132 a Verify job into the catalog results in a recursive loop. The problem
133 seems to show up only with postgresql (to be verified).
134 kes Correct %x to %p in postgresql debug statement.
136 kes Fix bug #942 where lots of emails where generated when the heartbeat
137 interval was low and Bacula wanted a different tape from the one in
140 ebl Add new SD despooling attributes and Dir inserting attributes
141 job status codes in the catalog (Status table).
143 ebl Use qmake-qt4 instead of qmake when available (debian system).
145 kes Add a security warning to src/cats/make_catalog_backup.in indicating
146 that passing the password via the command line (arg 3) is insecure.
147 This responds to bug #990 (it doesn't fix it).
149 kes Set default debug_level to zero. This corrects bugs #991 and #993.
150 kes Fix a crash in bat when it cannot connect to the Director for example
151 if the Director is not running.
152 kes Remove redundant INDEX (JobId) from File table in the trunk.
154 kes Make explicit exception to GPL in LICENSE to permit linking
155 the Win32 FD with Microsoft VSS code.
156 kes Apply the Solaris package patch from
157 Masopust, Christian <christian.masopust@siemens.com>
158 kes Apply the patch to optionally add a timestamp in the debug output
159 submitted by Mariusz Czulada <manieq@wp.eu>.
161 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
162 backend (sql_strerror). Fixes bug #989
164 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
165 It applied with no problems.
166 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
168 kes Redirect stderror to stdin on mt status command in mtx-changer.in
169 since the status is returned on stderr on Solaris.
170 kes Activate Close button on tray-monitor window. This fixes
172 kes Check for NULL item in parse_conf.c before calling it. In the
173 case of Device, there is no item and this caused a seg fault when
174 Device appears in the conf file.
175 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
176 avoids pulling in config.h multiple times in some new code.
178 kes Fix spurious warning message printed when creating a volume with
179 a LabelFormat. This fixes bug #976.
181 Release Version 2.2.5
183 kes Add JobId in place of Job name in all the Jmsg() output.
184 kes Correct the APP_DESC for the Win32 storage service (remove an e).
186 kes Make maxvol-test and new more strict maxvol2-test work.
187 kes Print JobId in all Jmsg() job output.
189 kes Add new SD despooling attributes and Dir inserting attributes
190 job status codes. This fixes bug 961.
191 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
193 kes Fix doc issue. This fixes bug #963.
194 kes Fix listing performance problems in bat. Pointed out by
196 kes Remove old debug code.
197 kes Fix bat code that tests for Win32. This should fix bug #968
198 kes Query 5 list wrong Vol after migration. This fixes bug #960
200 ebl Fix #969 where user can't change Replace option in restore menu.
202 kes Save jcr in thread specific data (tsd) for each thread.
203 kes Make Dmsg() print JobId as -%u.
204 kes Make Jmsg, Emsg, and others automatically pickup the jobid
205 for the thread if it exists.
206 kes Remove old reservation debug jid code.
207 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
208 ebl Add an option that permit to specify spool size in job
209 definition. (Applying patches/testing/spoolsize_per_job.patch).
210 You must upgrade SD and DIR at the same time.
211 dvl Add new configuration item --archivedir
212 dvl Adjust regression tests to use tmp not /tmp. This will allow
213 multiple concurrent runs of the regression tests.
215 kes Fix race condition that drops final block written to volume.
216 This happens in rare cases with multiple simultaneous jobs
217 when the Volume fills. This fixes bug #964. May be related
218 to bug #935 and possibly #903.
219 kes Eliminate more strerror() and replace with bstrerror().
220 kes Remove BSD getopt and replace with unrestricted IBM version.
221 kes Fix Win32 build for changed calling sequences.
222 kes More tweaks to the mount volume routines to get everything
223 right. Changed variable name from find to have_vol, which is
224 much easier to understand.
225 kes Enhance btimer debug code.
227 kes Fix FD->SD authorization failure, which was due to spurious
228 wakeups from a pthread_cond_timedwait(). Simply check the
229 predicate before continuing. This fixes bug #953.
230 kes Add const char where needed (more to do). Remove temp debug code.
232 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
233 kes Don't overwrite error message in check_tables_version.
235 kes Unlock batch insert tables with same calls used elsewhere.
236 kes Allow starting 59 jobs a second.
237 kes Make SD session key more random.
238 kes Add retry for SQLite opening db if it fails. Probably helps
240 kes Suppress extra error messages during batch insert failure.
242 kes Add jcr to timer packets so if killed message can be sent to job.
243 kes Add JobId to all Dmsg() output.
244 kes Put some FD auth code on dbglvl rather than fixed.
245 kes Return insert attributes error message in db msg buffer to avoid
246 false error messages. Helps fix bug #966.
247 kes Separate batch init error messages. Probably helps fix bug #966.
248 kes Make SD code that contructs attribute insert check string lengths
250 kes If Dir gets an error during inserting attributes, cancel SD.
251 This reduces unnecessary error messages.
253 kes Correct search boolean for getting Volume info
254 ebl Cleanup batch insert code. Probably fixes bug #965.
255 kes Back out one small change to the reservation system (reserving a volume).
256 kes Rework how a Volume is mounted. It is now much more intelligent and
257 will always attempt to use any mounted volume if possible and reduces
258 calls to the Director asking about volumes.
260 kes Turn off some code when batch insert not enabled.
261 kes Edit FD name in connect error messages.
262 kes Rework the reservation system to take into account that the Director
263 might give us a Volume that is different from the current one being
264 used, and to ensure that we don't exceed Maximum Volume Jobs.
265 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
266 fatal error with multiple jobs running'
267 kes Add more debug code in reservation system.
268 kes Implement maxvol-test to check bug #947.
270 kes Add code to handle tray monitor separated from Win32 FD.
271 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
273 kes Add missed return in fixing verify bug -- trunk only.
274 ebl Fix a command parser issue causing a director segfault.
275 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
277 kes Increase the max block size to 4MB fixes bug #957.
278 kes ERABT if user sets min block size > max block size. Fixes bug #956.
279 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
280 is not properly mounted (recognized) during a poll.
281 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
282 Job that has differences reports Verify OK.
283 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
285 ebl Add an option to operate on all pools with update vol parameters.
286 This complete the project 20. Patch from Nigel Stepp.
287 ebl Add history support to bconsole when using readline.
288 Using Ctrl-D to exit doesn't update .bconsole_history
289 kes Modify new volume algorithm to use max MediaId for generating next
290 volume number rather than the count of Volumes. This should essentially
291 eliminate the failure rate if some volumes were deleted. Bug #921.
292 kes Begin implemention of Optimize Job Scheduling.
293 kes Implement restore callback that Dirk and I agreed on for bat
294 restore. This fixes bug #928. Restore of backup of zero files fails.
295 kes Fix SQL Catalog logging which broke with new db_escape_string
298 Release Version 2.2.4
300 kes Fix bacula_cats.def for new db_escape_string().
301 kes Increase size of name string when FD making connection to SD.
302 May fix bug #953. FD->SD connection failure.
304 kes Add code to help Dan debug 2drive-incremental-2disk test.
305 kes Add code to try to fix bug #908.
306 kes Add waits to multiple exit detection code to try to force pid
307 file to always be deleted.
308 kes Restore good dev.tar.gz to rescue set appropriate binary property.
310 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
311 trying to switch drives by checking for blocking before unblocking.
313 kes Cancel storage daemon in all cases where FD reports error. This
314 should fix virtually all cases of bug #920.
315 kes Fix db_escape_string() for MySQL which did not compile.
317 kes Fix error message that was clobbered when Dir tells SD it does not
318 have write permission on Volume. This should fix a minor point
319 in bug #942, but not the main problem.
320 kes Add code to cancel job in SD if FD connection fails. This should
322 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
323 dvl Pass jcr and db into db_escape_string() to enable better escaping
325 kes Fix migration code to get correct Volume name with multiple volumes
326 by skipping |. Fixes bug #936.
327 kes Implement patch supplied by Landon to fix bug #944 where using
328 TLS with bconsole uses 99+% of the CPU.
329 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
331 kes Move patches into patches directory.
333 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
336 ebl Using 'm' in bconsole will show messages like before,
337 and not memory usage.
338 kes Fix bug #935, and probably also bug #903 where files were not
339 restored. MediaId was not properly set in JobMedia record after
342 kes Suppress chown and chmod error messages if the FD is not running
345 kes Apply Martin Simmons' patch that should turn off the new API usage
346 when batch insert is turned off allowing building on older
348 kes Add ./configure search in qwt-qt4 for qwt package
350 kes Bacula is now free of 3rd party GPL copyrighted code!
352 kes Add guid_to_name.c/h which replace idcache.
353 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
355 ebl Detect if new PosgreSQL batch insert API is present.
356 kes Correct incorrect mempool call causing Director crash. Occurs on
357 systems without va_copy().
358 sb Update spec files for 2.2.1 release
360 kes Fix memory pool call in ua_output.c. bug #934.
361 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
362 Add test program to fnmatch.c
364 kes Integrate patch to README.vc8 from
365 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
366 edit it to get it into Unix patch format.
367 kes Implement mkpath.c to replace old FSF makepath.c
369 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
371 Release Version 2.2.1
373 kes Update POTFILES.in
374 kes Cleanup a few underquoted AC_DEFUNs in configure
375 kes Apply patch from Martin Simmons that adds a test for va_copy to
378 kes Fix bug #921 by increasing the number of tries to create a new volume
380 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
381 can be called multiple times. Implement a version for machines
382 without va_copy() that gets a big buffer.
384 kes Integrate more portable zone offset code into bsmtp.c
385 Submitted by Attila Fülöp.
387 kes Fix bad SD->FD return status reported by
388 (James Harper) <james.harper@bendigoit.com.au>
389 ebl Fix a bug in read_close_session which return random status
390 thanks to James Harper
392 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
393 and directory names during restore of single file/directories.
394 kes Add sanity checks to .sql command when string is empty. Hopefully
395 that will resolve Dirks Director crash.
397 kes Apply patch submitted by Martin Simmons that corrects a seg fault
398 in the bsmtp chat subroutine when debug is >= 10.
400 kes Fix Director crash when running bat SQL queries.
401 kes Add David's notes on Item 8: Copy pools.
403 kes Rework projects file to be current and ready for a vote.
404 kes Enhance lex scanner error message.
406 kes Tweak LICENSE file to mention BSD code.
407 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
408 if specified on the ./configure.
409 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
410 This class is intended to allow us to open a second bsock to the
411 Director while in the restore subdialog.
413 kes Fix configure to create bat Makefile before creating dependencies.
414 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
415 kes Add a tooltip to the tray monitor.
416 dvl Set the Director's PID file before dropping privs. This fixes
419 kes Update AUTHORs file
420 kes Increase the default max concurrent jobs to 20 in FD and SD to
421 correspond with the default .conf files.
422 kes Rewrite the Win32 service routines. This eliminates the 3 copies
423 some different, of the same file created by RN when porting the
425 kes Rearrange some of the Win32 directories and the placement of the files
427 kes Set DEVELOPER flag in version.h
429 ========================================================================
430 Release Version 2.2.0
432 kes Apply a second doc patch from Marc.
433 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
434 improves the tips section that discusses how to setup multiple
437 kes Update bat README file.
438 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
439 corrects a typo in the Recycle status check in db_find_next_volume().
440 This will probably fix a number of annoying problems with multiple
442 kes Modify most of dird/msgchan.c to use bsock class calls rather than
443 bnet calls -- no functionality change.
445 kes Modify the Verify output to specify if files are missing on
446 the Volume(s) or disk. Fixes confusion in bug #916.
447 kes When more than one Volume is read in a migration job, the last
448 Volume bytes reported are from the last read volume rather than
449 the last written volume. Fixed. This fixes bug #910.
450 kes Fix display of Recycle flag after update volume=foo recycle=yes.
451 It previously printed New Recyle flag is: no. This fixes bug
454 kes Correct seg fault when switching tape drives during restore.
455 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
456 be used until after 2.2.0 release.
458 kes Remove fnmatch() in SD that permitted wild card specifications.
461 kes Fix %g in filename returned by SQL for browse tree reported by
463 kes Fix configure so that it puts config.out in the cwd rather than
465 kes Attempt to fix the locking problem reported by Eric in bug #906.
466 kes Make berrno class to leave errno unchanged after constructor call.
467 kes Make bnet_server use the heap rather than the stack to allocate
468 its socket fd pointers to avoid a crash at termination. Problem
469 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
471 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
472 and putting it in depkgs-qt along with Qt4.3.
474 kes Rework code in acquire.c that switches drives for reading when
475 the Media Type does not match. This should fix bug #906
477 ebl Fix a director segfault during job setup #907
478 kes Correct seg fault in postgresql when first operation returns no
479 rows. Fixes Dirks File browser problem seg fault with bat.
481 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
482 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
485 kes Implement PopUp YES/NO dialog for bat.
487 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
489 kes Correct RunScript to terminate job in FD on failure.
490 kes Change abort_on_error and AbortJobOnError to fail_on_error
491 and FailJobOnError in RunScripts.
492 kes Minor tweaks of code formating in RunScripts, principally to
493 avoid depassing 80 columns.
495 kes Eliminate one #ifdef Win32 in bsmtp
496 kes Implement grow tool to grow a file for testing very large databases.
497 kes Add big-vol-test to test Bacula seeking with > 5GB.
500 kes Modify find_next_volume() to return all values in Media record.
501 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
505 kes Update Release notes
507 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
508 Warning, in previous beta version, all media get from scratch keep their
511 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
512 This should fix bug #842. Made a note to look at removing the temp
513 files at the end of the install.
514 kes Add ability to mount and unmount a file device providing it is
515 marked as being removable and has the appropriate mount and unmount
516 commands defined in the Device resource. This fixes bug #830.
517 kes When applying a storage override, release all previous storage
518 definitions rather than just prepending the new storage.
519 This should prevent a good deal of confusion.
521 kes Implement ./configure search for qwt libraries.
523 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
524 Win32 FD. This should fix bug #893.
525 kes Remove an unnecessary beep in Win32 init code.
526 kes Update copyright dates in Win32 executable about boxes.
527 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
528 code with a BSD getopt.c and getopt.h.
529 kes Remove sched.h from the Win32 compat directory -- not used.
530 kes Remove the Exit menu item from the Win32 tray monitor. If you really
531 need to shut it down, do it through the services panel or the command
533 kes Remove some inappropriate Bacula FSFE copyrights.
534 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
535 kes Fix regress config non-portable test as pointed out by
536 Florian Heigl <florian.heigl@gmail.com>
537 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
538 as pointed out by Florian Heigl <florian.heigl@gmail.com>
540 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
541 Reported by Frank Sweetser.
545 kes Fix client-only build.
546 kes Integrate client-only fixes for bsys (initgroups) and conio from
547 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
548 kes Make arguments to get_scratch_volume() in same order as other
550 kes Rework the prune_volumes() subroutine so that after purging and
551 no volume found in desired pool, it will check for a scratch
552 volume. This prevents recycling the whole scratch pool.
553 kes Add code to status storage to print boffset_t (largefile support).
555 kes Move qwt (Graphics libarary for Qt4) to depkgs.
556 kes You now need a --with-qwt=<dir> to be able to build bat.
557 kes Update src/win32/cats/bacula_cats.def to include the new
558 db_get_query_dbids() call on Win32.
560 kes Correct a problem when selecting a scratch volume and moving
561 it to another pool that lost some columns.
562 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
563 kes Enhance Autochanger error messages to include Volume and device name.
564 kes Rework prune_volumes() code to take account of InChanger flag,
565 and to handle recycling volumes going to the Scratch pool and
566 current pool because the RecyclePool directive.
567 kes Implement a better and more efficient db_get_query_dbids() to
568 handle creating and passing back a list of DBIds.
572 kes Start work on new more efficient DBId subroutine. First use
573 will be for recycling volume to Scratch inchanger.
574 kes Increase number of JobIds in pruning from 1000 to 10000.
575 This to be replaced by above routine.
576 kes Begin implementation of building Qt4 on Win32.
577 kes Correct typo in fix I added for bad TLS shutdown.
578 kes Pull 2.0.3 patches into patches directory.
579 kes Update Release notes. Include qt-console in line count.
580 kes Update Projects file.
582 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
583 bug in migration code where a job that spanned two volumes
586 kes Implement new BST_DESPOOLING blocked state. Change from locking
587 during despooling in SD to blocking. This means that other threads
588 can work with the device structure, in particular the reservations
589 system while despooling.
591 kes Fix return in reservation message queue that missed clearing
592 the jcr lock (implemented 26Jun07 below).
593 kes Rename a number of dev methods to make locking function names
595 kes Document locking in lock.c. Move lock structures to new file
598 kes Move reservations message lock to lock jcr only this
600 kes Move main SD locking code into lock.c (new file).
601 kes Update Win32 build to include lock.c
605 kes Dirk committed the qwt library code for drawing graphs in bat.
606 kes Tweak install of qwt so that it is integrated with ./configure.
608 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
609 out by Eric (my typo).
610 ebl Fix configure.in to get batch mode enable
611 kes Return correct string from authenticate.cpp in bat when connecting
613 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
614 spurious line drops when using TLS.
615 kes Do not file reparse points when restoring a file that already
618 kes Implement Windows reparse points -- similar to directories, but
619 we do not descend into it. This is a first cut. They seem to
620 be backed up, but restore is not yet tested.
621 kes Remove restore_blocking in tls code when shutting a socket to leave
622 it in blocking mode. Hopefully this will fix the encryption bug
623 reported by Frank Sweetser.
624 kes When opening a file for backup, tell the OS that we are going to
625 read it sequentially -- optimization.
626 kes Change variable names in authenticate_director() to not conflict
627 with member names in bat. Caused great confusion with compiler,
630 kes Queue openssl error messages in case of comm problem.
631 kes Do shutdown() call if socket terminated.
632 kes Remove some duplicated code in tls.c
633 kes Move more of the bsock member variables into private and access
635 kes Add Frank Sweetser's tls-test to the regression suite.
637 kes Add Swedish sv.po file
639 kes Don't print clock skew message in FD if less than 3 seconds diff.
640 kes Add a bit of VSS info to status client.
641 kes Implement a first cut of Vista VSS, using Win2003 code.
645 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
646 loaded tape but uses first drive).
647 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
648 This was indeed a Win32 issue.
650 kes Simplify search of autochanger for in-use Volume.
651 kes Fix exit condition of check for in-use volume. kes Remove
652 inappropriate my_postgresql_free_result() in db_close()
654 kes Fix bad return in FD when encryption signature not found.
655 Probably caused a crash.
656 kes Inhibit missing encryption signature error messages for
657 file types where no signature computed.
658 kes Correct inverted check on autochanger in reservation system.
659 kes Tweak debug code in autochanger reservation.
661 kes Add some additional locking in the cats directory in subroutines
662 that modify packet variables called from batch insert.
663 kes Rework how dcrs are allocated. new_dcr() can now be called
664 with an existing pointer, and it will simply clean it up.
665 This allows the reservation system to test various different
666 devices, and will permit easy device changes.
667 kes A bunch of changes all over to handle new new_dcr() calling
669 kes Work more on the Volume management in the SD. Remember Volumes
670 for tape drives and for autochangers (even virtual disk changers).
671 kes When looking at the Volume list to reserve a drive, handle
672 autochanger names correctly by interating through the changer
673 devices. Also call the Director to see if a Volume is suitable
675 kes Fix some bugs in bscan. Make sure all media records are written.
676 Make sure that valid JobMedia records are written for disk files.
677 Previously they were completely wrong.
678 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
679 that the URLs don't change and so that the developers will all
680 work off the same copy. Rebuild from scrach.
681 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
685 kes Fix seg fault in FD from incorrect digest size.
686 kes Fix argument to non-OpenSSL crypto.c subroutine.
690 kes Remove a few malloc()s from the encryption code.
691 kes Use the class calls to bsock in filed/backup.c and restore.c in
692 place of the old bnet_xxx code.
693 kes Implement code that does an on the fly calculation of the
694 signing digest during restore of encrypted files. It makes
695 a best guess at the algorithm, and if it is not correct, will
696 then revert to the old code which reads the file after it is
698 kes Implement at least one missing crypto stream in stream_to_ascii()
699 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
700 #877 where a reload with bad syntax causes Dir to exit.
702 Cut: 2.1.14 beta (not released)
704 kes Do not free a volume on a tape drive until another volume is
705 mounted and read, or the autochanger unloads the volume.
706 This should help the SD re-use volumes that are already mounted,
707 and should fix bug #886.
708 kes Apply patch from user brettedgar that allows gnome2-console include
709 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
710 kes Apply patch from Lucien Weller that fixes day of week calculation
711 because of DST flag problem. Fixes bug #887.
713 kes Move find_next_appendable_volume() to after acquiring a valid device
714 in reserve.c. This fixes bug #864 -- confirmed by reporter.
716 kes Unable to reproduce bug 872. However added additional testing for
718 kes Bug #874 resolved by documenting SQLite limitations.
719 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
720 kes Bug #881 resolved by removing typo in mtx-changer script.
721 kes Made Frank Sweetser's wiki the official Bacula wiki with his
722 approval. Added a link to the wiki on the web page, and implemented
723 a backup from http://paramount.ind.wpi.edu
725 kes Fix update allfrompool to pass pool name.
727 kes Convert to pure GPL v2 license.
728 kes Fix sscanf problems reported by Peter Buschman that caused
729 a bus error on Solaris.
730 kes Rework (simplify) the select prompt in bat.
731 kes Move get_jobid_from_tid() into lib and create a
733 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
734 should definitely fix the problem of lost error messages in the
736 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
737 kes Eliminate tcpd.h from the project. Enclose the #include from the
738 library with extern C ...
739 kes Add print of signal name when a signal is trapped.
743 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
745 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
746 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
747 makes SQLit3 run 30 times faster, though a bit less safe.
748 kes Implement --with-batch-insert in configure and detection of thread
749 safe libraries. It is on by default, but turned off if no thread
750 safe library (e.g. SQLite 2) is available.
752 kes Fix Bacula PostgreSQL buffer overruns.
753 kes Do better checking for NULL results returned from PostgreSQL;
754 implement retry for failed queries; clear results buffer after
755 failed query. Hopefully this will correct the PostgreSQL failures.
757 kes Implement algorithm to handle only one appendable volume with
758 Prefer Mounted Volumes = no.
759 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
760 returned from a query.
761 kes Make volume lock recursive.
762 kes Implement an additional volume reservation algorithm that
763 starts by considering all reserved volumes then uses the
764 old brute force algorithm of searching the resources to
765 find a suitable device.
766 kes Add new reservations debug code and refine the old code.
767 kes Update the win32/dll/bacula.defs file.
769 kes Tweak reservations algorithm to permit a few more cases, i.e.
770 volume reserved, but on different drive, ...
771 kes Enhance SD status to include Pool and Media Type for drive in a
772 more readable format (a bit longer).
773 kes Fix PostgreSQL double free.
775 kes Minor refactoring of restore decryption code.
776 kes Add code to smartall.c to detect double free of a buffer.
778 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
779 so that bsmtp will create a correct email address (mailbox only).
780 kes Modify 'memory' command so that the buffers are listed as 'In use'
781 to avoid confusion with Orphaned buffers.
782 kes I reworked the OpenSSL include/lib flags to be handled in
783 the standard Bacula way, which should fix bug #863 concerning
784 non-standard OpenSSL libraries.
786 kes Implement Help Browser window for bat.
787 kes Fix reload bug that reset StorageId to zero.
789 kes Fix TLS #ifdefing when TLS turned off.
790 kes Ensure that when labelling a tape with Slot=0 that InChanger
792 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
794 kes Add StartTime to final uar_sel_jobid_temp query so that we can
795 add DISTINCT (required by PostgreSQL).
796 kes Implement BSOCK authenticate_director() method. Eventually will
797 authenicate all daemons.
798 kes Move several more functions into the BSOCK class.
800 kes Add code to tell the OS that we no longer need a cached
801 file that we were reading. In findlib/bfile.c. Also,
802 only cache files that we are reading. Thanks to
803 Tobias Oetiker <tobi@oetiker.ch> for the idea.
804 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
805 kes Implement script to automatically generate cats and dll .def
807 kes Update README.mingw32 to include new .def file generation.
808 kes Correct typo in UTF-8 error message as reported by:
809 jhernandez <julianhernandez@gmail.com>
810 kes Add additional sm_check() code on debug level 1.
811 kes Set default debug level to 1.
812 kes Trap SIGABRT in attempt to get traceback.
814 kes Reduce bat connect timeout from 30 to 15 seconds.
815 kes More restructuring and implementing BSOCK class in place of
817 kes Remove a few unnecessary malloc() tests in crypto code.
818 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
819 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
820 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
822 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
824 kes Fix Verify InitCatalog. The attributes were not pointing to the
825 correct saved location.
826 kes Implement message callback so that GUI is sure to get all
827 daemon messages. Currently displayed in a dialog in bat.
828 kes Ignore SIGUSR2 (Bacula timer) in bat.
829 kes Apply regress patch from bug #859 to allow regress to work
830 with Solaris compiler.
832 kes Begin adding TLS support to bat.
833 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
834 clean up lex.c and make it more readable.
836 kes Move more bnet functions into the BSOCK class.
837 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
838 kes Complete change of berrno strerror() method to bstrerror()
842 kes Cleanup incorrect email addresses in bsmtp.
843 kes Make bat display initial messages rather than discard them.
845 kes First cut of adding .mod to the run command.
846 kes Implement auto display of messages in bat.
847 kes Enhanced preferences to allow all Bacula output to be
850 kes Try to make bsmtp date routines more generic.
851 kes Fixed bug #856 autochanger documentation.
852 kes Rework bsmtp date editing for Win32. This fixes bug #854.
853 kes Add new cats entry point so Win32 builds.
855 kes Attempt to fix bsmtp date editing on OSes without %z editing.
857 kes Do better checking for the MySQL 64 bit libraries looking for both
858 .a and .so libraries.
859 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
860 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
861 kes Require the thread safe version of MySQL during configure. Thanks
862 to Andre Noll for pointing this out.
863 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
864 continuing in migration code.
865 kes Apply implementation of tray-monitor font derived from gnome-console
866 submitted by Andreas Piesk <a.piesk@gmx.net>
868 kes Eliminate important memory loss in SQLite
869 kes Fixed the batch insert MySQL thread specific data that was not
870 being freed. See cats/mysql.c:db_thread_cleanup().
871 kes Fix restore before command.
872 kes Convert old hdr.name to name() in a few places.
873 kes Implement update jobid command.
874 kes Return all time_t dates in db_get_job_record()
875 kes Stop watchdog in SD earlier.
876 kes Put Pool just after Storage in please mount message.
877 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
880 kes Update the po files.
881 kes Fix Verify InitCatalog by making it cache attributes.
883 kes Change name bacula-bat to bat for man 1 page to correspond to
885 kes Check for client and store NULL pointers in status command. This
887 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
888 kes Fix sign extended editing of %p.
889 kes Clean out a little old #ifdefing in cats/mysql.c
891 kes If time diff between DIR and FD is more than 600 seconds convert
892 INFO message to WARNING.
893 kes Implement heap size display in status for all daemons.
894 kes Attempt to fix MySQL db open memory loss (not successfull).
895 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
896 kes Eliminate memory loss in MySQL (possibly other SQLs) during
897 Query. This looks like a MySQL but but by doing extra releases,
898 the memory goes away. This should fix bug #847.
900 kes When backup fails, cancel SD before waiting for sd termination.
901 kes If SD is waiting for FD to connect during cancel, wake up the
903 kes Fix fsf code so that errno is correctly reported.
904 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
906 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
907 so that Bacula doesn't later stumble into a seg fault.
908 kes Use the term Restore Client in the restore Job report.
909 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
910 the original job's FileSetId.
911 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
912 spooling in migration jobs. Not yet tested.
913 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
914 reading conf file from a pipe. However, do it with open_bpipe()
915 rather than popen. Not yet tested.
917 kes Fix an ugly bug where the VolCatBytes were getting updated
919 kes Implement bconsole memory command that prints current memory
920 usage, plus smartalloc dump.
921 kes Clarify some error messages in backup, admin, and migrate.
922 kes Shrink label dialog to smaller size.
923 kes Invert Cancel OK buttons on restore to be OK Cancel.
924 kes More strerror() to bstrerror() conversions.
926 kes Start implementing bstrerror() in place of strerror().
927 kes Stripping path -- seems to work.
929 kes Prevent door and port files from being restored (mostly
931 kes Free an unreleased buffer in compat code.
932 kes Change console Job name from *Console* to -Console- to eliminate
933 Win32 filename problems. Put Win32 path separator when creating
934 Console file. This fixes bug #846.
935 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
937 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
939 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
940 to force Win32 error message.
942 kes First cut strip path. The data should be passed to the FD,
943 but nothing is done with it yet.
944 kes Enhance the digest and signature routines in the crypto
945 library to accept a JCR and to use it to print error messages
946 so that they will go in the Job report rather than the daemon's
948 kes Simplify some of the verify signature code.
949 kes Simplify a few of the alternative returns in the signature
952 ebl Use only POSIX regex instead of GNU regex in breg.c for
953 File relocation. It fix broken freebsd compilation.
954 kes Convert all other Dir files to use new ua class message
956 kes Tentative fix for missing digest signature in bug 807.
957 kes Correct handle problem in new win32_ftruncate routine.
958 kes Convert ua_purge.c and ua_update.c to use new ua class
959 message routines for bat.
961 kes Correct incorrect installation of LICENSE in Win32 installer.
962 kes Display LICENSE at the beginning of the Win32 install.
963 kes Attempt to correct the need for the png files to be installed
965 kes Reapply my bat.conf install script in qt-console. I think I
966 editted bat.pro instead of bat.pro.in and it was lost.
967 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
968 the /var/lock/subsys for subsysdir. Also corrects typos in the
971 kes First cut update job.
972 kes Correct configure to include qmake of src/qt-console directory.
974 kes Make restore job yes/mod/no print in one command so GUI works.
975 kes First cut implementing backup and restore client.
976 kes Correct editing in Verify output that caused a seg fault.
978 kes Insure that bat.conf is not overwritten during installation.
979 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
980 while I was implementing migration in March 2006 !
982 ebl Cleanup file relocation, using char *RegexWhere instead of
983 char *where + bool where_use_regexp
984 kes Update some manpages and add bat manpage.
985 kes Make a first cut at converting bacula.spec.in for bwx-console
987 kes Apply patch from John Goerzen to add hostname as fourth argument
988 to make_catalog_backup script.
989 kes Fix typos I introduced into bsmtp.c
990 kes Make pm_strxxx() routines handle input of NULL pointer. This
991 is to protect from NULL pointers returned from SQL databases.
992 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
993 kes Add more debug to FIFO code -- fix fifo regression test.
995 kes Implement posix_fadvise in FD, and for reading spool files in SD.
996 kes Add thread timer to bnet_connect() to break from OS if wait time
999 kes Update Win32 build to include new files, new symbols, and
1001 kes Implement socket level heartbeat (tcp_keepidle)
1002 ebl Commit File relocation patch
1003 kes Make bat have 'make install' target.
1004 kes Warn during install if old gnome-console binary found.
1005 kes Warn during install if old wx-console binary found.
1006 kes Add -8 option to bsmtp command line to add content type utf-8.
1007 Fixes bug #809. (Character coding problem in bsmtp).
1008 kes If < is found in target (from, to, cc) then do not enclose the
1009 target in < > in bsmtp. Fixes bug #772 (malformed address).
1010 kes When printing certain items in dbcheck, stop after 300000.
1011 Fixes bug #822. (dbcheck loops).
1012 kes Incorrect status in Dir after waiting for mount with poll set.
1015 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1017 kes Print waiting to reserve a device every 5 mins.
1019 kes Don't call close_part in label.c if tape and relabel.
1020 kes Don't free volume if busy in close() -- should help with
1022 ebl Fix #824 RunScript bug (After script could be execute twice)
1023 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1024 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1025 Add a regression script to test RunScript
1027 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1030 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1031 deprecated. No additional bugs will be fixed, and they will be dropped
1032 in a future release (probably 2.4.0).
1033 kes Change name of wx-console to bwx-console to make it more Bacula
1035 kes Change the name of gnome-console to bgnome-console to make it
1038 kes Some time in March, a Feature Request with patch from Jorj Bauer
1039 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1041 The ability for the director to validate a Client (FD) CN against
1042 an arbitrary set of patterns rather than the hostname, with
1043 A new 'TLS Allowed CN' set of directives which are implemented
1044 in the Client resource. Then pattern matching is used in place
1045 of hostname matching against the Certificate's CN. As an example, we
1046 have certificates which (a) use a local CA, and (b) have a CN of the
1048 kes Add new/changed entry points to Win32 build
1049 kes Create unaccepted-projects for projects that are not accepted.
1050 kes Simplify locking in the reservations system.
1051 kes Add more debug code in reservations.
1052 kes Make sure error condition on reserving a volume is handled correctly.
1053 kes Correct handling of volume_in_use.
1054 kes Correct handling of initializing a device.
1055 kes Move handling of broadcasting releasing a device into release_device().
1056 kes Correct attaching dcr to dev so that it is only done if device
1057 is properly initiated.
1059 kes Locking debug level tweaks in SD.
1060 kes Tweak new Volume code.
1062 kes Add exec external-command [wait-seconds] to bconsole. This
1063 executes the external-command. Note! normally external-command
1064 should be enclosed in double quotes.
1065 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1066 it should normally be off in a production system.
1068 kes Implement die command for SD so that we can force it to dump.
1069 kes Implement SD lock debug code.
1070 kes Implement new algorithm for keeping Volume list in SD. It
1071 is now owned by the device.
1073 kes Implement new code for freeing in use volumes that should
1074 resolve if not all, some of the problems of multiple drive
1075 tape conflicts described in bug 801.
1077 kes Fix gui/bacula-web/images files in svn.
1078 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1080 ebl Fix a bug in batch mode (in string escape)
1081 kes Correct migration prune SQL typo that crept in in a
1082 recent 2.1.x change.
1084 kes Move bnet_despool() into class in bsock.c
1085 kes Modify job report to include director name and Build OS.
1086 kes Move drop root privilege and check_catalog() before fork.
1087 kes Add update database scripts (version 9 to 10) to updatedb directory.
1089 ebl Check size and age of each file after its backup to see if
1090 it has changed during backup, if 'checkfilechanges' is set.
1091 The FD will do an extra check (stat(2)) after
1092 each file backup. mtime, ctime and size are compared with
1093 'before backup' information. If time or size mismatch, an
1094 error message will be generated. You must upgrade FD to use it.
1096 kes Make database name and user configurable
1097 --with-db-name=xxx --with-db-user=xxx
1098 kes Add back database type to message.c for debugging.
1100 kes Implement dir_sql() which issues an SQL query.
1101 kes Modify bat medialist to use dir_sql() and do some minor C++
1102 formatting as well as eliminating a number of pointers, simplifing
1105 kes Fix some of the mtx-changer grep commands for tape label readers.
1106 kes Convert a number of bsendmsg into the appropriate send/warning/error
1107 message class calls.
1108 kes Suppress the using database message in the .sql command.
1109 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1111 kes Add context menu for floating a window.
1112 kes Some minor cleanup and name changes in qt-console
1113 kes Add doing mt setblk 0 in Win32 mtx-changer.
1114 kes Apply Martin's bug fix to move definition of ENODATA for
1116 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1117 sqlite2 and sqlite3.
1119 kes More pruning cleanup.
1120 kes Turn on wait_for_drive by default in mtx-changer.
1121 kes Turn on Batch insert code by default as it now passes regression.
1122 kes Add ./configure --enable-bat to enable building of Bat.
1123 No install yet though.
1125 kes Implement a new .sql command for bat.
1126 kes Implement code to turn off pruning in obtaining the next volume.
1127 Pruning is turned off for the status dir command, but turned on
1128 for SD requests and for the list nextvolume command.
1130 kes Correct Qmsg() that was not updated correctly when committing a
1131 previous change (probably the recent TLS patch).
1133 kes Write new subroutine is_volume_purged() that explicitly checks
1134 if the Volume is purged, and if so marks it as such. This should
1135 resolve problems reported about needing to mount twice to recycle
1137 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1138 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1139 amount of duplicated code.
1140 kes Do volume pruning only for the Media Type desired (reduces pruning time
1141 if multiple Media Types are in the same pool).
1142 kes Implement more detailed info in the Job report for the Bacula version
1144 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1146 ebl Add bbatch tool to bench database and insert mode.
1147 Fix sql quote stuff in batch mode
1148 Fix sql stuff for mysql
1150 kes Correct problems with am/pm scheduling. Fixes bug #808.
1151 kes Implement new prunning code that prunes up to 1000 jobs at
1152 the same time. The same technique can be applied to a number
1153 of other prune/purge subroutines.
1154 kes Add an insanity check when starting a new tape job to ensure
1155 that the tape position has not been changed. If so fail the
1157 kes Fix Win32 build for dlls to add the folllowing:
1158 src/lib/bsock.c -- new file with new entry points
1159 src/lib/dlist.c -- new entry points
1160 src/cats/sql_create.c -- new entry point
1161 src/cats/sql_cmds.c -- new DATA item exported
1163 ebl batch mode cleanup bscan-test is ok now.
1164 kes Implement SD code to check length of disk volume before appending.
1166 kes Correct return status on db_batch... routines.
1167 kes Add call to db_write_batch_file_records() to migration code.
1168 ebl Fix AfterJob timing
1169 kes Move the checking of the database in initializion of the Director
1170 to after we drop privileges. This avoids the need for both root
1171 and bacula access to the DB.
1172 kes Correct a misplaced variable definition in src/filed/backup.c
1173 kes Correct how the new batch insert db_create_attributes_record()
1174 uses the arguments. Caused a seg fault in bscan.
1175 kes Implement lock() and unlock() methods in DEVICE class.
1176 Implement block() and set_block(xx) methods in DEVICE class.
1177 kes Modify bnet_connect() so that it uses time() to check for the
1178 wait time expiring (on some OSes, some system calls may not
1179 return immediately).
1180 kes Modify Verify to obtain the previous JobId when it is actually
1181 running rather than at schedule time (as it was in 1.38.x).
1182 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1184 kes When checking pid in pid file, continue running if the pid is
1185 the same as ours. This occurs on IRIX after a system crash.
1188 kes Extend new GUI API.
1189 kes Make the ua structure a class, and implement send_msg(),
1190 error_msg(), warning_msg(), and info_msg().
1192 kes Apply fix from for building wx-console on the Mac from
1194 kes Implement new select mechanism for GUI programs.
1195 kes Reorganize initialization of stackedWidgets in bat.
1197 kes Add updated nagios plugin supplied by Christian Masopust.
1199 kes More bat implementation.
1200 kes File migrate bug with Pool Occupancy using mediaid instead
1201 of jobids. Fixes bug #795.
1202 kes Fix orphaned buffers in filed backup and verify due to
1203 crypto buffers not freed during errors. Fixes bug #789.
1204 kes Extend new GUI api code to tree commands.
1205 kes Ensure that tree and dot commands check console ACLs.
1206 kes Permit marking directory with trailing slash.
1207 kes Allow 20 console connections (instead of only 10).
1209 kes Add smartctl call to bacula-sd.conf as an example of getting
1212 kes Modify jobq.c to let simultaneous restore jobs run. This may
1213 cause them to fail if they cannot get a drive.
1214 kes Add Client Connect Wait to Storage daemon to permit users to
1215 modify the time the SD waits for a FD connection.
1217 kes Correct virtual changer check which was backwards. This caused
1218 volumes to be unloaded into slots already occupied.
1220 kes Apply Command ACL filter to JobId list in restore command.
1221 kes Correct typeo in var.c patch.
1223 kes Don't let Bacula prune File or Job records for the current Job.
1224 kes Fix variable substitution pad + inc bug reported (with patch)
1227 kes Correct SQLite log table index as reported by Luca Berra.
1229 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1231 kes Begin implementing new comm signals for API.
1232 kes Fix a few places in lib/message.c where the open fd may
1234 kes Continue implementing lib/bsock.c (real class). Make jcr,
1235 who, host, and port private. There are new methods to access
1236 them for non-class use. This required touching a number of files.
1238 kes Add LANG=C to autoconf/randpass so it works with languages other
1239 than English. Fixes bug #788.
1241 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1243 You will not be able to generate Include/Exclude list any more.
1244 It will be fixed soon.
1245 If you want to use this, you can apply
1246 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1248 kes Restore of sockets created false error messages because Bacula
1249 no longer restores sockets, but the code was still trying to
1250 set the attributes on a non-existent file. Reported by a user.
1251 ebl finish RecyclePool feature
1252 Media will takes Pool.RecyclePool
1253 when moving from Scratch to a Pool or when user will do
1254 update volume=xxx frompool
1255 To use it, add RecyclePool = aPool to your Pool resource
1258 RecyclePool = Scratch
1262 kes Expand new BSOCK class adding signal() and new BNET signals.
1263 kes Begin enhancing the dot commands adding a new API function
1264 that returns more information and will make it easier
1265 to interface to the Director from a program.
1267 kes Make DEVICE fd private. Its new name is m_fd, and can be
1268 obtained with dev->fd() outside the class. This is the
1269 first of many DEVICE members to be made private.
1270 kes Implement Michael Renner's idea on having a virtual disk
1271 changer. I made some minor modifications (e.g. I did not
1272 implement the Virtual Changer directive, but simply set
1273 the Changer Command to an empty string.
1275 kes Implement a BSOCK send() method that writes the whole record
1276 in a single write() request rather than in two.
1277 ebl add update volume=xxx recyclepool=yyyy
1278 volume takes recyclepool from pool when using update volume=xxx from pool
1280 kes Fix encryption deblocking bug, which caused some restored files
1281 to be truncated. This fixes bug #763.
1282 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1283 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1285 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1286 ebl Use btime_t instead of uint64_t in media patch.
1288 kes Optimize the use of the database a bit in the Status dir command.
1289 Only open it when needed, ensure that if any previous database
1290 was opened, it is closed.
1292 kes Correct VolCatBytes bug from media patch.
1293 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1294 in the case of orphaned records.
1295 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1296 and File records in 300K chunks to be more efficient. This
1297 idea came from Juan Luis Frances (if I remember right).
1298 kes Apply Eric's scratch patch that moves a purged Volume to
1299 the RecyclePool. Question: how is RecyclePool set? what
1300 happens to the ScratchPool?
1301 kes Apply Eric's media patch that collects read/write media
1302 times as well as byte counts. This patch requires a
1303 simultaneous upgrade of the DIR and SD. Note, there
1304 should be some way to turn off timing. I'm not sure
1305 times are in Bacula units.
1306 kes Apply Eric's batch-insert patch.
1308 kes Update projects list.
1310 kes Implement Include/Exclude file lists in FD as dlists using
1311 the new dlistString class. This permits efficiently having
1312 large include/exclude lists and completes project Item 25.
1313 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1314 console is authorized to cancel the job. This fixes bug
1316 kes Modify SD so that the VolCatJobs medium record is updated
1317 at the beginning of a Job rather than the end. This
1318 fixes bug #775 where exceeding MaxVolJobs caused jobs
1320 kes Added a mutex around getting and setting Volume information
1321 so that multiple simultaneous jobs will single thread.
1323 Switch to using Subversion
1324 kes Remove src/pygtk-console/ from configure
1326 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1327 plus the entrypoints.
1328 kes Apply patch supplied that corrects debug print
1329 in canceling jobs for max run time. Supplied as
1330 part of bug #621, which was previously fixed.
1332 kes Test on job_canceled() and sd_msg_thread_done inside
1333 loop starting the message thread to avoid a race condition.
1335 kes Remove rl_catch_signal from console.c as it conflicted
1336 with the header definition. Fixes bug #765.
1337 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1339 kes Clarify some stored/acquire messages to indicate if the
1340 problem is with read or append.
1342 kes Fix memory leak with storage ids in cats/sql_get.c
1343 kes Terminate watchdog earlier to avoid reference to released
1344 memory -- reported by Jason Austin.
1345 kes Move closing the database from jobq.c to the director daemon
1346 termination routine. This fixes memory leaks for shadow jobs
1347 (i.e. migration jobs).
1348 kes Free up the unique jobid chain items in migrate.c. This fixes
1349 a memory leak problem.
1350 kes Convert some ugly looking for statements to use foreach_alist
1351 in findlib/find.c. This will facilitate converting the structures
1352 to use dlist (for large include/exclude lists).
1353 kes Fix a bug in the btree.c and btree.h routines, then rename them
1354 rblist and add them to be built in src/lib. Include some new
1355 methods written by Rudolf Cejka that make the code more readable
1356 (hides some of the ugly casting).
1357 kes Add set_next() and set_prev() methods which make the code much more
1358 readable. Also add a new dlistString class that facilitates storing
1359 strings in dlists. To be used in the large include/exclude lists.
1360 kes Make some trivial modifications to lib/tree.h that use rblist
1361 rather than dlist for storing the tree links. This was suggested
1362 by Rudolf Cejka. The result of this is that the restore tree now
1363 uses red-black binary trees rather than simple linked lists. This
1364 should give rather dramatic speed improvements for directories
1365 contining large numbers of directories/files (more than 10000).
1367 kes Fix maxruntime bug #621.
1369 ebl Implement the include JobID in spool file name project.
1370 kes Reorder projects file in order determined by Jan 2007 vote.
1371 kes Implement item #12 on project list -- quick release of FD by
1373 kes Fix open of SQLite3 db where user does not have write permission
1374 so that DIR does not crash. Fixes bug #761.
1376 kes Add back missing @ in Win32 Makefile.
1377 kes Change 'Device not configured to autolabel' from INFO
1379 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1380 which should restart an indefinite # of times.
1381 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1382 other DIR specifications.
1384 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1385 Fix path quoting in SQLite scripts.
1386 Fix problems with SHGetFolderPath.
1388 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1390 kes Fix Job restart on error bug that promotes an Inc to a Full
1391 backup. This should fix bug #755.
1392 kes Add qt-console and first cut of code.
1396 kes Fix Bacula->Documentation link on Win32 to point to index.html
1397 instead of bacula.html. Fixed bug #750.
1398 kes Return JobId in db_get_job_record() when JobId==0. This should
1400 kes Do not release source pointers when restarting a failed job.
1402 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1403 This *should* fix bug #747.
1404 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1407 kes Modify USTORE constructor to set an empty store_source string,
1408 and don't copy the store_source string in a cancel. Hopefully
1409 this will fix Arno's seg fault, bug #744.
1410 kes Add back code to disable conio in configure. Fixes bug #743.
1411 kes Correct the Options scanner in the FD to correctly handle
1412 SHA1 option, which was eating the next option. Reported by
1414 kes Add code to indicate when the SD is spooling, spool wait, and
1415 despooling as requested by Alan Brown.
1417 Version 2.0.0 released: 4 January 2007