1 Technical notes on version 2.3
5 kes Fix exist switch drive SD code to call autochanger to release
6 any old volume. This must be done to keep the autochanger from
7 releasing subsequently newly reserved volumes in doing a close().
8 kes Fail if attempting to get console input in batch mode. This
9 should help fail RunScript console commands that are incomplete.
10 kes First cut implementing switch_drive() in SD (not actually called).
12 kes Implement first cut running console commands in a RunScript.
14 ebl Fixes #1028 where "Selection Type" option was not usable with JobDefs.
15 ebl Fixes #897 and #1005 where bacula doesn't display runscript
18 kes Add new free_tls() entry point so that Win32 builds.
19 kes Fix compile warning in src/lib/util.c
20 kes Fix entry point for edit_job_codes() so that Win32 builds.
21 kes Fix seg fault Frank Sweetser reports in regression testing
22 on his systems. The problem was that the original author of
23 bsnprintf.c did not take into account the side effects of
24 using ++x in the argument to a #define.
25 kes Make SD protocol backward compatible with version 2.2.x.
27 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
28 because Bacula no longer restores sockets.
29 ebl Always use ignorecase fileset option on win32 FD.
31 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
32 that implements double quoting include names in conf files,
33 and also allows piping input by having the first character
34 be a vertical bar (|).
35 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
36 that implement %f in RunScripts to pass the FileSet name.
37 kes Skip leading | when lex input comes from a pipe as suggested
38 by Michael Stapelberg <michael@stapelberg.de>.
40 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
41 Nerijus Baliunas <nerijus@users.sourceforge.net>
43 kes Implement Plugin Directory and plugin events.
45 kes Implement a security enhancement: TLS authentication but no
46 encryption. Enabled by setting 'TLS Authentication = yes'.
47 Note when this is on, TLS encryption is turned OFF!
49 kes This patch corrects a problem where the maximum concurrent storage
50 jobs counter gets out of sync during restore jobs causing jobs to
51 'wait on max Storage jobs'. This patch fixes bug #1009.
53 kes This patch fixes bcopy so that it produces correct Volumes.
55 kes This patch eliminates spurious output to the console during a VerifyVolume
56 job that contains encrypted data. It fixes bug #1024.
58 kes This patch prevents the 'status dir' command from trying to use a scratch
59 volume and possibly moving it from one pool to another. This patch fixes
62 kes Add new include to postgresql.c suggested by Marc Cousins so
63 that it compiles correctly with pgre version 8.3.
65 kes Fix --archivedir addition to configure. Replace it with
66 --with-archivedir in configure.in This fixes the regression
68 kes This patch fixes bug #1012 where the job is canceled because
69 of Max Run Time exceeded when the job has not yet started.
71 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
72 one 'part' to write. Instead of each part being stored on disk,
73 written to DVD, then deleted from disk, all parts are written to disk,
74 and only the last is written and deleted from disk.
75 kes This patch fixes the status command to include the formating string for
76 JS_AttrInsterting. It fixes bug #1021.
77 kes This patch should fix the Mac OS X build problem on the latest
78 Darwin, where sys/types.h was not included correctly (apparently
79 due to a change in the Mac headers). The solution was to explicitly
80 ensure that it is defined for the ./configure.
81 This patch also has a rebuild of configure that includes the Debian
82 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
83 kes This patch should ensure that queued messages to the console are
84 displayed as soon as possible. It should fix bug 1007, but has been
87 kes This patch fixes the infinite loop when trying to increase the
88 maximum number of volumes in a Pool during the add command.
89 This patch fixes bug #1008.
93 db Remove extra data on estimate command in joblist for bat.
95 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
96 really change anything, but is the beginning of doing it *right*.
97 To do it completely right the LastWritten date must be passed to
98 the SD, but it is not yet done.
99 kes Minor tweaks to some bat restore SQL.
100 kes This patch fixes bug #1003 where putting the message output from
101 a Verify job into the catalog results in a recursive loop. The problem
102 seems to show up only with postgresql (to be verified).
103 kes Correct %x to %p in postgresql debug statement.
105 kes Fix bug #942 where lots of emails where generated when the heartbeat
106 interval was low and Bacula wanted a different tape from the one in
109 ebl Add new SD despooling attributes and Dir inserting attributes
110 job status codes in the catalog (Status table).
112 ebl Use qmake-qt4 instead of qmake when available (debian system).
114 kes Add a security warning to src/cats/make_catalog_backup.in indicating
115 that passing the password via the command line (arg 3) is insecure.
116 This responds to bug #990 (it doesn't fix it).
118 kes Set default debug_level to zero. This corrects bugs #991 and #993.
119 kes Fix a crash in bat when it cannot connect to the Director for example
120 if the Director is not running.
121 kes Remove redundant INDEX (JobId) from File table in the trunk.
123 kes Make explicit exception to GPL in LICENSE to permit linking
124 the Win32 FD with Microsoft VSS code.
125 kes Apply the Solaris package patch from
126 Masopust, Christian <christian.masopust@siemens.com>
127 kes Apply the patch to optionally add a timestamp in the debug output
128 submitted by Mariusz Czulada <manieq@wp.eu>.
130 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
131 backend (sql_strerror). Fixes bug #989
133 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
134 It applied with no problems.
135 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
137 kes Redirect stderror to stdin on mt status command in mtx-changer.in
138 since the status is returned on stderr on Solaris.
139 kes Activate Close button on tray-monitor window. This fixes
141 kes Check for NULL item in parse_conf.c before calling it. In the
142 case of Device, there is no item and this caused a seg fault when
143 Device appears in the conf file.
144 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
145 avoids pulling in config.h multiple times in some new code.
147 kes Fix spurious warning message printed when creating a volume with
148 a LabelFormat. This fixes bug #976.
150 Release Version 2.2.5
152 kes Add JobId in place of Job name in all the Jmsg() output.
153 kes Correct the APP_DESC for the Win32 storage service (remove an e).
155 kes Make maxvol-test and new more strict maxvol2-test work.
156 kes Print JobId in all Jmsg() job output.
158 kes Add new SD despooling attributes and Dir inserting attributes
159 job status codes. This fixes bug 961.
160 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
162 kes Fix doc issue. This fixes bug #963.
163 kes Fix listing performance problems in bat. Pointed out by
165 kes Remove old debug code.
166 kes Fix bat code that tests for Win32. This should fix bug #968
167 kes Query 5 list wrong Vol after migration. This fixes bug #960
169 ebl Fix #969 where user can't change Replace option in restore menu.
171 kes Save jcr in thread specific data (tsd) for each thread.
172 kes Make Dmsg() print JobId as -%u.
173 kes Make Jmsg, Emsg, and others automatically pickup the jobid
174 for the thread if it exists.
175 kes Remove old reservation debug jid code.
176 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
177 ebl Add an option that permit to specify spool size in job
178 definition. (Applying patches/testing/spoolsize_per_job.patch).
179 You must upgrade SD and DIR at the same time.
180 dvl Add new configuration item --archivedir
181 dvl Adjust regression tests to use tmp not /tmp. This will allow
182 multiple concurrent runs of the regression tests.
184 kes Fix race condition that drops final block written to volume.
185 This happens in rare cases with multiple simultaneous jobs
186 when the Volume fills. This fixes bug #964. May be related
187 to bug #935 and possibly #903.
188 kes Eliminate more strerror() and replace with bstrerror().
189 kes Remove BSD getopt and replace with unrestricted IBM version.
190 kes Fix Win32 build for changed calling sequences.
191 kes More tweaks to the mount volume routines to get everything
192 right. Changed variable name from find to have_vol, which is
193 much easier to understand.
194 kes Enhance btimer debug code.
196 kes Fix FD->SD authorization failure, which was due to spurious
197 wakeups from a pthread_cond_timedwait(). Simply check the
198 predicate before continuing. This fixes bug #953.
199 kes Add const char where needed (more to do). Remove temp debug code.
201 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
202 kes Don't overwrite error message in check_tables_version.
204 kes Unlock batch insert tables with same calls used elsewhere.
205 kes Allow starting 59 jobs a second.
206 kes Make SD session key more random.
207 kes Add retry for SQLite opening db if it fails. Probably helps
209 kes Suppress extra error messages during batch insert failure.
211 kes Add jcr to timer packets so if killed message can be sent to job.
212 kes Add JobId to all Dmsg() output.
213 kes Put some FD auth code on dbglvl rather than fixed.
214 kes Return insert attributes error message in db msg buffer to avoid
215 false error messages. Helps fix bug #966.
216 kes Separate batch init error messages. Probably helps fix bug #966.
217 kes Make SD code that contructs attribute insert check string lengths
219 kes If Dir gets an error during inserting attributes, cancel SD.
220 This reduces unnecessary error messages.
222 kes Correct search boolean for getting Volume info
223 ebl Cleanup batch insert code. Probably fixes bug #965.
224 kes Back out one small change to the reservation system (reserving a volume).
225 kes Rework how a Volume is mounted. It is now much more intelligent and
226 will always attempt to use any mounted volume if possible and reduces
227 calls to the Director asking about volumes.
229 kes Turn off some code when batch insert not enabled.
230 kes Edit FD name in connect error messages.
231 kes Rework the reservation system to take into account that the Director
232 might give us a Volume that is different from the current one being
233 used, and to ensure that we don't exceed Maximum Volume Jobs.
234 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
235 fatal error with multiple jobs running'
236 kes Add more debug code in reservation system.
237 kes Implement maxvol-test to check bug #947.
239 kes Add code to handle tray monitor separated from Win32 FD.
240 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
242 kes Add missed return in fixing verify bug -- trunk only.
243 ebl Fix a command parser issue causing a director segfault.
244 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
246 kes Increase the max block size to 4MB fixes bug #957.
247 kes ERABT if user sets min block size > max block size. Fixes bug #956.
248 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
249 is not properly mounted (recognized) during a poll.
250 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
251 Job that has differences reports Verify OK.
252 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
254 ebl Add an option to operate on all pools with update vol parameters.
255 This complete the project 20. Patch from Nigel Stepp.
256 ebl Add history support to bconsole when using readline.
257 Using Ctrl-D to exit doesn't update .bconsole_history
258 kes Modify new volume algorithm to use max MediaId for generating next
259 volume number rather than the count of Volumes. This should essentially
260 eliminate the failure rate if some volumes were deleted. Bug #921.
261 kes Begin implemention of Optimize Job Scheduling.
262 kes Implement restore callback that Dirk and I agreed on for bat
263 restore. This fixes bug #928. Restore of backup of zero files fails.
264 kes Fix SQL Catalog logging which broke with new db_escape_string
267 Release Version 2.2.4
269 kes Fix bacula_cats.def for new db_escape_string().
270 kes Increase size of name string when FD making connection to SD.
271 May fix bug #953. FD->SD connection failure.
273 kes Add code to help Dan debug 2drive-incremental-2disk test.
274 kes Add code to try to fix bug #908.
275 kes Add waits to multiple exit detection code to try to force pid
276 file to always be deleted.
277 kes Restore good dev.tar.gz to rescue set appropriate binary property.
279 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
280 trying to switch drives by checking for blocking before unblocking.
282 kes Cancel storage daemon in all cases where FD reports error. This
283 should fix virtually all cases of bug #920.
284 kes Fix db_escape_string() for MySQL which did not compile.
286 kes Fix error message that was clobbered when Dir tells SD it does not
287 have write permission on Volume. This should fix a minor point
288 in bug #942, but not the main problem.
289 kes Add code to cancel job in SD if FD connection fails. This should
291 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
292 dvl Pass jcr and db into db_escape_string() to enable better escaping
294 kes Fix migration code to get correct Volume name with multiple volumes
295 by skipping |. Fixes bug #936.
296 kes Implement patch supplied by Landon to fix bug #944 where using
297 TLS with bconsole uses 99+% of the CPU.
298 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
300 kes Move patches into patches directory.
302 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
305 ebl Using 'm' in bconsole will show messages like before,
306 and not memory usage.
307 kes Fix bug #935, and probably also bug #903 where files were not
308 restored. MediaId was not properly set in JobMedia record after
311 kes Suppress chown and chmod error messages if the FD is not running
314 kes Apply Martin Simmons' patch that should turn off the new API usage
315 when batch insert is turned off allowing building on older
317 kes Add ./configure search in qwt-qt4 for qwt package
319 kes Bacula is now free of 3rd party GPL copyrighted code!
321 kes Add guid_to_name.c/h which replace idcache.
322 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
324 ebl Detect if new PosgreSQL batch insert API is present.
325 kes Correct incorrect mempool call causing Director crash. Occurs on
326 systems without va_copy().
327 sb Update spec files for 2.2.1 release
329 kes Fix memory pool call in ua_output.c. bug #934.
330 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
331 Add test program to fnmatch.c
333 kes Integrate patch to README.vc8 from
334 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
335 edit it to get it into Unix patch format.
336 kes Implement mkpath.c to replace old FSF makepath.c
338 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
340 Release Version 2.2.1
342 kes Update POTFILES.in
343 kes Cleanup a few underquoted AC_DEFUNs in configure
344 kes Apply patch from Martin Simmons that adds a test for va_copy to
347 kes Fix bug #921 by increasing the number of tries to create a new volume
349 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
350 can be called multiple times. Implement a version for machines
351 without va_copy() that gets a big buffer.
353 kes Integrate more portable zone offset code into bsmtp.c
354 Submitted by Attila Fülöp.
356 kes Fix bad SD->FD return status reported by
357 (James Harper) <james.harper@bendigoit.com.au>
358 ebl Fix a bug in read_close_session which return random status
359 thanks to James Harper
361 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
362 and directory names during restore of single file/directories.
363 kes Add sanity checks to .sql command when string is empty. Hopefully
364 that will resolve Dirks Director crash.
366 kes Apply patch submitted by Martin Simmons that corrects a seg fault
367 in the bsmtp chat subroutine when debug is >= 10.
369 kes Fix Director crash when running bat SQL queries.
370 kes Add David's notes on Item 8: Copy pools.
372 kes Rework projects file to be current and ready for a vote.
373 kes Enhance lex scanner error message.
375 kes Tweak LICENSE file to mention BSD code.
376 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
377 if specified on the ./configure.
378 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
379 This class is intended to allow us to open a second bsock to the
380 Director while in the restore subdialog.
382 kes Fix configure to create bat Makefile before creating dependencies.
383 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
384 kes Add a tooltip to the tray monitor.
385 dvl Set the Director's PID file before dropping privs. This fixes
388 kes Update AUTHORs file
389 kes Increase the default max concurrent jobs to 20 in FD and SD to
390 correspond with the default .conf files.
391 kes Rewrite the Win32 service routines. This eliminates the 3 copies
392 some different, of the same file created by RN when porting the
394 kes Rearrange some of the Win32 directories and the placement of the files
396 kes Set DEVELOPER flag in version.h
398 ========================================================================
399 Release Version 2.2.0
401 kes Apply a second doc patch from Marc.
402 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
403 improves the tips section that discusses how to setup multiple
406 kes Update bat README file.
407 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
408 corrects a typo in the Recycle status check in db_find_next_volume().
409 This will probably fix a number of annoying problems with multiple
411 kes Modify most of dird/msgchan.c to use bsock class calls rather than
412 bnet calls -- no functionality change.
414 kes Modify the Verify output to specify if files are missing on
415 the Volume(s) or disk. Fixes confusion in bug #916.
416 kes When more than one Volume is read in a migration job, the last
417 Volume bytes reported are from the last read volume rather than
418 the last written volume. Fixed. This fixes bug #910.
419 kes Fix display of Recycle flag after update volume=foo recycle=yes.
420 It previously printed New Recyle flag is: no. This fixes bug
423 kes Correct seg fault when switching tape drives during restore.
424 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
425 be used until after 2.2.0 release.
427 kes Remove fnmatch() in SD that permitted wild card specifications.
430 kes Fix %g in filename returned by SQL for browse tree reported by
432 kes Fix configure so that it puts config.out in the cwd rather than
434 kes Attempt to fix the locking problem reported by Eric in bug #906.
435 kes Make berrno class to leave errno unchanged after constructor call.
436 kes Make bnet_server use the heap rather than the stack to allocate
437 its socket fd pointers to avoid a crash at termination. Problem
438 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
440 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
441 and putting it in depkgs-qt along with Qt4.3.
443 kes Rework code in acquire.c that switches drives for reading when
444 the Media Type does not match. This should fix bug #906
446 ebl Fix a director segfault during job setup #907
447 kes Correct seg fault in postgresql when first operation returns no
448 rows. Fixes Dirks File browser problem seg fault with bat.
450 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
451 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
454 kes Implement PopUp YES/NO dialog for bat.
456 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
458 kes Correct RunScript to terminate job in FD on failure.
459 kes Change abort_on_error and AbortJobOnError to fail_on_error
460 and FailJobOnError in RunScripts.
461 kes Minor tweaks of code formating in RunScripts, principally to
462 avoid depassing 80 columns.
464 kes Eliminate one #ifdef Win32 in bsmtp
465 kes Implement grow tool to grow a file for testing very large databases.
466 kes Add big-vol-test to test Bacula seeking with > 5GB.
469 kes Modify find_next_volume() to return all values in Media record.
470 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
474 kes Update Release notes
476 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
477 Warning, in previous beta version, all media get from scratch keep their
480 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
481 This should fix bug #842. Made a note to look at removing the temp
482 files at the end of the install.
483 kes Add ability to mount and unmount a file device providing it is
484 marked as being removable and has the appropriate mount and unmount
485 commands defined in the Device resource. This fixes bug #830.
486 kes When applying a storage override, release all previous storage
487 definitions rather than just prepending the new storage.
488 This should prevent a good deal of confusion.
490 kes Implement ./configure search for qwt libraries.
492 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
493 Win32 FD. This should fix bug #893.
494 kes Remove an unnecessary beep in Win32 init code.
495 kes Update copyright dates in Win32 executable about boxes.
496 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
497 code with a BSD getopt.c and getopt.h.
498 kes Remove sched.h from the Win32 compat directory -- not used.
499 kes Remove the Exit menu item from the Win32 tray monitor. If you really
500 need to shut it down, do it through the services panel or the command
502 kes Remove some inappropriate Bacula FSFE copyrights.
503 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
504 kes Fix regress config non-portable test as pointed out by
505 Florian Heigl <florian.heigl@gmail.com>
506 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
507 as pointed out by Florian Heigl <florian.heigl@gmail.com>
509 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
510 Reported by Frank Sweetser.
514 kes Fix client-only build.
515 kes Integrate client-only fixes for bsys (initgroups) and conio from
516 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
517 kes Make arguments to get_scratch_volume() in same order as other
519 kes Rework the prune_volumes() subroutine so that after purging and
520 no volume found in desired pool, it will check for a scratch
521 volume. This prevents recycling the whole scratch pool.
522 kes Add code to status storage to print boffset_t (largefile support).
524 kes Move qwt (Graphics libarary for Qt4) to depkgs.
525 kes You now need a --with-qwt=<dir> to be able to build bat.
526 kes Update src/win32/cats/bacula_cats.def to include the new
527 db_get_query_dbids() call on Win32.
529 kes Correct a problem when selecting a scratch volume and moving
530 it to another pool that lost some columns.
531 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
532 kes Enhance Autochanger error messages to include Volume and device name.
533 kes Rework prune_volumes() code to take account of InChanger flag,
534 and to handle recycling volumes going to the Scratch pool and
535 current pool because the RecyclePool directive.
536 kes Implement a better and more efficient db_get_query_dbids() to
537 handle creating and passing back a list of DBIds.
541 kes Start work on new more efficient DBId subroutine. First use
542 will be for recycling volume to Scratch inchanger.
543 kes Increase number of JobIds in pruning from 1000 to 10000.
544 This to be replaced by above routine.
545 kes Begin implementation of building Qt4 on Win32.
546 kes Correct typo in fix I added for bad TLS shutdown.
547 kes Pull 2.0.3 patches into patches directory.
548 kes Update Release notes. Include qt-console in line count.
549 kes Update Projects file.
551 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
552 bug in migration code where a job that spanned two volumes
555 kes Implement new BST_DESPOOLING blocked state. Change from locking
556 during despooling in SD to blocking. This means that other threads
557 can work with the device structure, in particular the reservations
558 system while despooling.
560 kes Fix return in reservation message queue that missed clearing
561 the jcr lock (implemented 26Jun07 below).
562 kes Rename a number of dev methods to make locking function names
564 kes Document locking in lock.c. Move lock structures to new file
567 kes Move reservations message lock to lock jcr only this
569 kes Move main SD locking code into lock.c (new file).
570 kes Update Win32 build to include lock.c
574 kes Dirk committed the qwt library code for drawing graphs in bat.
575 kes Tweak install of qwt so that it is integrated with ./configure.
577 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
578 out by Eric (my typo).
579 ebl Fix configure.in to get batch mode enable
580 kes Return correct string from authenticate.cpp in bat when connecting
582 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
583 spurious line drops when using TLS.
584 kes Do not file reparse points when restoring a file that already
587 kes Implement Windows reparse points -- similar to directories, but
588 we do not descend into it. This is a first cut. They seem to
589 be backed up, but restore is not yet tested.
590 kes Remove restore_blocking in tls code when shutting a socket to leave
591 it in blocking mode. Hopefully this will fix the encryption bug
592 reported by Frank Sweetser.
593 kes When opening a file for backup, tell the OS that we are going to
594 read it sequentially -- optimization.
595 kes Change variable names in authenticate_director() to not conflict
596 with member names in bat. Caused great confusion with compiler,
599 kes Queue openssl error messages in case of comm problem.
600 kes Do shutdown() call if socket terminated.
601 kes Remove some duplicated code in tls.c
602 kes Move more of the bsock member variables into private and access
604 kes Add Frank Sweetser's tls-test to the regression suite.
606 kes Add Swedish sv.po file
608 kes Don't print clock skew message in FD if less than 3 seconds diff.
609 kes Add a bit of VSS info to status client.
610 kes Implement a first cut of Vista VSS, using Win2003 code.
614 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
615 loaded tape but uses first drive).
616 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
617 This was indeed a Win32 issue.
619 kes Simplify search of autochanger for in-use Volume.
620 kes Fix exit condition of check for in-use volume. kes Remove
621 inappropriate my_postgresql_free_result() in db_close()
623 kes Fix bad return in FD when encryption signature not found.
624 Probably caused a crash.
625 kes Inhibit missing encryption signature error messages for
626 file types where no signature computed.
627 kes Correct inverted check on autochanger in reservation system.
628 kes Tweak debug code in autochanger reservation.
630 kes Add some additional locking in the cats directory in subroutines
631 that modify packet variables called from batch insert.
632 kes Rework how dcrs are allocated. new_dcr() can now be called
633 with an existing pointer, and it will simply clean it up.
634 This allows the reservation system to test various different
635 devices, and will permit easy device changes.
636 kes A bunch of changes all over to handle new new_dcr() calling
638 kes Work more on the Volume management in the SD. Remember Volumes
639 for tape drives and for autochangers (even virtual disk changers).
640 kes When looking at the Volume list to reserve a drive, handle
641 autochanger names correctly by interating through the changer
642 devices. Also call the Director to see if a Volume is suitable
644 kes Fix some bugs in bscan. Make sure all media records are written.
645 Make sure that valid JobMedia records are written for disk files.
646 Previously they were completely wrong.
647 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
648 that the URLs don't change and so that the developers will all
649 work off the same copy. Rebuild from scrach.
650 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
654 kes Fix seg fault in FD from incorrect digest size.
655 kes Fix argument to non-OpenSSL crypto.c subroutine.
659 kes Remove a few malloc()s from the encryption code.
660 kes Use the class calls to bsock in filed/backup.c and restore.c in
661 place of the old bnet_xxx code.
662 kes Implement code that does an on the fly calculation of the
663 signing digest during restore of encrypted files. It makes
664 a best guess at the algorithm, and if it is not correct, will
665 then revert to the old code which reads the file after it is
667 kes Implement at least one missing crypto stream in stream_to_ascii()
668 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
669 #877 where a reload with bad syntax causes Dir to exit.
671 Cut: 2.1.14 beta (not released)
673 kes Do not free a volume on a tape drive until another volume is
674 mounted and read, or the autochanger unloads the volume.
675 This should help the SD re-use volumes that are already mounted,
676 and should fix bug #886.
677 kes Apply patch from user brettedgar that allows gnome2-console include
678 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
679 kes Apply patch from Lucien Weller that fixes day of week calculation
680 because of DST flag problem. Fixes bug #887.
682 kes Move find_next_appendable_volume() to after acquiring a valid device
683 in reserve.c. This fixes bug #864 -- confirmed by reporter.
685 kes Unable to reproduce bug 872. However added additional testing for
687 kes Bug #874 resolved by documenting SQLite limitations.
688 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
689 kes Bug #881 resolved by removing typo in mtx-changer script.
690 kes Made Frank Sweetser's wiki the official Bacula wiki with his
691 approval. Added a link to the wiki on the web page, and implemented
692 a backup from http://paramount.ind.wpi.edu
694 kes Fix update allfrompool to pass pool name.
696 kes Convert to pure GPL v2 license.
697 kes Fix sscanf problems reported by Peter Buschman that caused
698 a bus error on Solaris.
699 kes Rework (simplify) the select prompt in bat.
700 kes Move get_jobid_from_tid() into lib and create a
702 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
703 should definitely fix the problem of lost error messages in the
705 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
706 kes Eliminate tcpd.h from the project. Enclose the #include from the
707 library with extern C ...
708 kes Add print of signal name when a signal is trapped.
712 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
714 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
715 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
716 makes SQLit3 run 30 times faster, though a bit less safe.
717 kes Implement --with-batch-insert in configure and detection of thread
718 safe libraries. It is on by default, but turned off if no thread
719 safe library (e.g. SQLite 2) is available.
721 kes Fix Bacula PostgreSQL buffer overruns.
722 kes Do better checking for NULL results returned from PostgreSQL;
723 implement retry for failed queries; clear results buffer after
724 failed query. Hopefully this will correct the PostgreSQL failures.
726 kes Implement algorithm to handle only one appendable volume with
727 Prefer Mounted Volumes = no.
728 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
729 returned from a query.
730 kes Make volume lock recursive.
731 kes Implement an additional volume reservation algorithm that
732 starts by considering all reserved volumes then uses the
733 old brute force algorithm of searching the resources to
734 find a suitable device.
735 kes Add new reservations debug code and refine the old code.
736 kes Update the win32/dll/bacula.defs file.
738 kes Tweak reservations algorithm to permit a few more cases, i.e.
739 volume reserved, but on different drive, ...
740 kes Enhance SD status to include Pool and Media Type for drive in a
741 more readable format (a bit longer).
742 kes Fix PostgreSQL double free.
744 kes Minor refactoring of restore decryption code.
745 kes Add code to smartall.c to detect double free of a buffer.
747 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
748 so that bsmtp will create a correct email address (mailbox only).
749 kes Modify 'memory' command so that the buffers are listed as 'In use'
750 to avoid confusion with Orphaned buffers.
751 kes I reworked the OpenSSL include/lib flags to be handled in
752 the standard Bacula way, which should fix bug #863 concerning
753 non-standard OpenSSL libraries.
755 kes Implement Help Browser window for bat.
756 kes Fix reload bug that reset StorageId to zero.
758 kes Fix TLS #ifdefing when TLS turned off.
759 kes Ensure that when labelling a tape with Slot=0 that InChanger
761 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
763 kes Add StartTime to final uar_sel_jobid_temp query so that we can
764 add DISTINCT (required by PostgreSQL).
765 kes Implement BSOCK authenticate_director() method. Eventually will
766 authenicate all daemons.
767 kes Move several more functions into the BSOCK class.
769 kes Add code to tell the OS that we no longer need a cached
770 file that we were reading. In findlib/bfile.c. Also,
771 only cache files that we are reading. Thanks to
772 Tobias Oetiker <tobi@oetiker.ch> for the idea.
773 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
774 kes Implement script to automatically generate cats and dll .def
776 kes Update README.mingw32 to include new .def file generation.
777 kes Correct typo in UTF-8 error message as reported by:
778 jhernandez <julianhernandez@gmail.com>
779 kes Add additional sm_check() code on debug level 1.
780 kes Set default debug level to 1.
781 kes Trap SIGABRT in attempt to get traceback.
783 kes Reduce bat connect timeout from 30 to 15 seconds.
784 kes More restructuring and implementing BSOCK class in place of
786 kes Remove a few unnecessary malloc() tests in crypto code.
787 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
788 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
789 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
791 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
793 kes Fix Verify InitCatalog. The attributes were not pointing to the
794 correct saved location.
795 kes Implement message callback so that GUI is sure to get all
796 daemon messages. Currently displayed in a dialog in bat.
797 kes Ignore SIGUSR2 (Bacula timer) in bat.
798 kes Apply regress patch from bug #859 to allow regress to work
799 with Solaris compiler.
801 kes Begin adding TLS support to bat.
802 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
803 clean up lex.c and make it more readable.
805 kes Move more bnet functions into the BSOCK class.
806 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
807 kes Complete change of berrno strerror() method to bstrerror()
811 kes Cleanup incorrect email addresses in bsmtp.
812 kes Make bat display initial messages rather than discard them.
814 kes First cut of adding .mod to the run command.
815 kes Implement auto display of messages in bat.
816 kes Enhanced preferences to allow all Bacula output to be
819 kes Try to make bsmtp date routines more generic.
820 kes Fixed bug #856 autochanger documentation.
821 kes Rework bsmtp date editing for Win32. This fixes bug #854.
822 kes Add new cats entry point so Win32 builds.
824 kes Attempt to fix bsmtp date editing on OSes without %z editing.
826 kes Do better checking for the MySQL 64 bit libraries looking for both
827 .a and .so libraries.
828 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
829 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
830 kes Require the thread safe version of MySQL during configure. Thanks
831 to Andre Noll for pointing this out.
832 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
833 continuing in migration code.
834 kes Apply implementation of tray-monitor font derived from gnome-console
835 submitted by Andreas Piesk <a.piesk@gmx.net>
837 kes Eliminate important memory loss in SQLite
838 kes Fixed the batch insert MySQL thread specific data that was not
839 being freed. See cats/mysql.c:db_thread_cleanup().
840 kes Fix restore before command.
841 kes Convert old hdr.name to name() in a few places.
842 kes Implement update jobid command.
843 kes Return all time_t dates in db_get_job_record()
844 kes Stop watchdog in SD earlier.
845 kes Put Pool just after Storage in please mount message.
846 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
849 kes Update the po files.
850 kes Fix Verify InitCatalog by making it cache attributes.
852 kes Change name bacula-bat to bat for man 1 page to correspond to
854 kes Check for client and store NULL pointers in status command. This
856 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
857 kes Fix sign extended editing of %p.
858 kes Clean out a little old #ifdefing in cats/mysql.c
860 kes If time diff between DIR and FD is more than 600 seconds convert
861 INFO message to WARNING.
862 kes Implement heap size display in status for all daemons.
863 kes Attempt to fix MySQL db open memory loss (not successfull).
864 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
865 kes Eliminate memory loss in MySQL (possibly other SQLs) during
866 Query. This looks like a MySQL but but by doing extra releases,
867 the memory goes away. This should fix bug #847.
869 kes When backup fails, cancel SD before waiting for sd termination.
870 kes If SD is waiting for FD to connect during cancel, wake up the
872 kes Fix fsf code so that errno is correctly reported.
873 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
875 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
876 so that Bacula doesn't later stumble into a seg fault.
877 kes Use the term Restore Client in the restore Job report.
878 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
879 the original job's FileSetId.
880 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
881 spooling in migration jobs. Not yet tested.
882 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
883 reading conf file from a pipe. However, do it with open_bpipe()
884 rather than popen. Not yet tested.
886 kes Fix an ugly bug where the VolCatBytes were getting updated
888 kes Implement bconsole memory command that prints current memory
889 usage, plus smartalloc dump.
890 kes Clarify some error messages in backup, admin, and migrate.
891 kes Shrink label dialog to smaller size.
892 kes Invert Cancel OK buttons on restore to be OK Cancel.
893 kes More strerror() to bstrerror() conversions.
895 kes Start implementing bstrerror() in place of strerror().
896 kes Stripping path -- seems to work.
898 kes Prevent door and port files from being restored (mostly
900 kes Free an unreleased buffer in compat code.
901 kes Change console Job name from *Console* to -Console- to eliminate
902 Win32 filename problems. Put Win32 path separator when creating
903 Console file. This fixes bug #846.
904 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
906 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
908 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
909 to force Win32 error message.
911 kes First cut strip path. The data should be passed to the FD,
912 but nothing is done with it yet.
913 kes Enhance the digest and signature routines in the crypto
914 library to accept a JCR and to use it to print error messages
915 so that they will go in the Job report rather than the daemon's
917 kes Simplify some of the verify signature code.
918 kes Simplify a few of the alternative returns in the signature
921 ebl Use only POSIX regex instead of GNU regex in breg.c for
922 File relocation. It fix broken freebsd compilation.
923 kes Convert all other Dir files to use new ua class message
925 kes Tentative fix for missing digest signature in bug 807.
926 kes Correct handle problem in new win32_ftruncate routine.
927 kes Convert ua_purge.c and ua_update.c to use new ua class
928 message routines for bat.
930 kes Correct incorrect installation of LICENSE in Win32 installer.
931 kes Display LICENSE at the beginning of the Win32 install.
932 kes Attempt to correct the need for the png files to be installed
934 kes Reapply my bat.conf install script in qt-console. I think I
935 editted bat.pro instead of bat.pro.in and it was lost.
936 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
937 the /var/lock/subsys for subsysdir. Also corrects typos in the
940 kes First cut update job.
941 kes Correct configure to include qmake of src/qt-console directory.
943 kes Make restore job yes/mod/no print in one command so GUI works.
944 kes First cut implementing backup and restore client.
945 kes Correct editing in Verify output that caused a seg fault.
947 kes Insure that bat.conf is not overwritten during installation.
948 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
949 while I was implementing migration in March 2006 !
951 ebl Cleanup file relocation, using char *RegexWhere instead of
952 char *where + bool where_use_regexp
953 kes Update some manpages and add bat manpage.
954 kes Make a first cut at converting bacula.spec.in for bwx-console
956 kes Apply patch from John Goerzen to add hostname as fourth argument
957 to make_catalog_backup script.
958 kes Fix typos I introduced into bsmtp.c
959 kes Make pm_strxxx() routines handle input of NULL pointer. This
960 is to protect from NULL pointers returned from SQL databases.
961 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
962 kes Add more debug to FIFO code -- fix fifo regression test.
964 kes Implement posix_fadvise in FD, and for reading spool files in SD.
965 kes Add thread timer to bnet_connect() to break from OS if wait time
968 kes Update Win32 build to include new files, new symbols, and
970 kes Implement socket level heartbeat (tcp_keepidle)
971 ebl Commit File relocation patch
972 kes Make bat have 'make install' target.
973 kes Warn during install if old gnome-console binary found.
974 kes Warn during install if old wx-console binary found.
975 kes Add -8 option to bsmtp command line to add content type utf-8.
976 Fixes bug #809. (Character coding problem in bsmtp).
977 kes If < is found in target (from, to, cc) then do not enclose the
978 target in < > in bsmtp. Fixes bug #772 (malformed address).
979 kes When printing certain items in dbcheck, stop after 300000.
980 Fixes bug #822. (dbcheck loops).
981 kes Incorrect status in Dir after waiting for mount with poll set.
984 kes Extend idea of Prefer Mounted Volumes to mean a volume about
986 kes Print waiting to reserve a device every 5 mins.
988 kes Don't call close_part in label.c if tape and relabel.
989 kes Don't free volume if busy in close() -- should help with
991 ebl Fix #824 RunScript bug (After script could be execute twice)
992 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
993 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
994 Add a regression script to test RunScript
996 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
999 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1000 deprecated. No additional bugs will be fixed, and they will be dropped
1001 in a future release (probably 2.4.0).
1002 kes Change name of wx-console to bwx-console to make it more Bacula
1004 kes Change the name of gnome-console to bgnome-console to make it
1007 kes Some time in March, a Feature Request with patch from Jorj Bauer
1008 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1010 The ability for the director to validate a Client (FD) CN against
1011 an arbitrary set of patterns rather than the hostname, with
1012 A new 'TLS Allowed CN' set of directives which are implemented
1013 in the Client resource. Then pattern matching is used in place
1014 of hostname matching against the Certificate's CN. As an example, we
1015 have certificates which (a) use a local CA, and (b) have a CN of the
1017 kes Add new/changed entry points to Win32 build
1018 kes Create unaccepted-projects for projects that are not accepted.
1019 kes Simplify locking in the reservations system.
1020 kes Add more debug code in reservations.
1021 kes Make sure error condition on reserving a volume is handled correctly.
1022 kes Correct handling of volume_in_use.
1023 kes Correct handling of initializing a device.
1024 kes Move handling of broadcasting releasing a device into release_device().
1025 kes Correct attaching dcr to dev so that it is only done if device
1026 is properly initiated.
1028 kes Locking debug level tweaks in SD.
1029 kes Tweak new Volume code.
1031 kes Add exec external-command [wait-seconds] to bconsole. This
1032 executes the external-command. Note! normally external-command
1033 should be enclosed in double quotes.
1034 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1035 it should normally be off in a production system.
1037 kes Implement die command for SD so that we can force it to dump.
1038 kes Implement SD lock debug code.
1039 kes Implement new algorithm for keeping Volume list in SD. It
1040 is now owned by the device.
1042 kes Implement new code for freeing in use volumes that should
1043 resolve if not all, some of the problems of multiple drive
1044 tape conflicts described in bug 801.
1046 kes Fix gui/bacula-web/images files in svn.
1047 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1049 ebl Fix a bug in batch mode (in string escape)
1050 kes Correct migration prune SQL typo that crept in in a
1051 recent 2.1.x change.
1053 kes Move bnet_despool() into class in bsock.c
1054 kes Modify job report to include director name and Build OS.
1055 kes Move drop root privilege and check_catalog() before fork.
1056 kes Add update database scripts (version 9 to 10) to updatedb directory.
1058 ebl Check size and age of each file after its backup to see if
1059 it has changed during backup, if 'checkfilechanges' is set.
1060 The FD will do an extra check (stat(2)) after
1061 each file backup. mtime, ctime and size are compared with
1062 'before backup' information. If time or size mismatch, an
1063 error message will be generated. You must upgrade FD to use it.
1065 kes Make database name and user configurable
1066 --with-db-name=xxx --with-db-user=xxx
1067 kes Add back database type to message.c for debugging.
1069 kes Implement dir_sql() which issues an SQL query.
1070 kes Modify bat medialist to use dir_sql() and do some minor C++
1071 formatting as well as eliminating a number of pointers, simplifing
1074 kes Fix some of the mtx-changer grep commands for tape label readers.
1075 kes Convert a number of bsendmsg into the appropriate send/warning/error
1076 message class calls.
1077 kes Suppress the using database message in the .sql command.
1078 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1080 kes Add context menu for floating a window.
1081 kes Some minor cleanup and name changes in qt-console
1082 kes Add doing mt setblk 0 in Win32 mtx-changer.
1083 kes Apply Martin's bug fix to move definition of ENODATA for
1085 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1086 sqlite2 and sqlite3.
1088 kes More pruning cleanup.
1089 kes Turn on wait_for_drive by default in mtx-changer.
1090 kes Turn on Batch insert code by default as it now passes regression.
1091 kes Add ./configure --enable-bat to enable building of Bat.
1092 No install yet though.
1094 kes Implement a new .sql command for bat.
1095 kes Implement code to turn off pruning in obtaining the next volume.
1096 Pruning is turned off for the status dir command, but turned on
1097 for SD requests and for the list nextvolume command.
1099 kes Correct Qmsg() that was not updated correctly when committing a
1100 previous change (probably the recent TLS patch).
1102 kes Write new subroutine is_volume_purged() that explicitly checks
1103 if the Volume is purged, and if so marks it as such. This should
1104 resolve problems reported about needing to mount twice to recycle
1106 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1107 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1108 amount of duplicated code.
1109 kes Do volume pruning only for the Media Type desired (reduces pruning time
1110 if multiple Media Types are in the same pool).
1111 kes Implement more detailed info in the Job report for the Bacula version
1113 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1115 ebl Add bbatch tool to bench database and insert mode.
1116 Fix sql quote stuff in batch mode
1117 Fix sql stuff for mysql
1119 kes Correct problems with am/pm scheduling. Fixes bug #808.
1120 kes Implement new prunning code that prunes up to 1000 jobs at
1121 the same time. The same technique can be applied to a number
1122 of other prune/purge subroutines.
1123 kes Add an insanity check when starting a new tape job to ensure
1124 that the tape position has not been changed. If so fail the
1126 kes Fix Win32 build for dlls to add the folllowing:
1127 src/lib/bsock.c -- new file with new entry points
1128 src/lib/dlist.c -- new entry points
1129 src/cats/sql_create.c -- new entry point
1130 src/cats/sql_cmds.c -- new DATA item exported
1132 ebl batch mode cleanup bscan-test is ok now.
1133 kes Implement SD code to check length of disk volume before appending.
1135 kes Correct return status on db_batch... routines.
1136 kes Add call to db_write_batch_file_records() to migration code.
1137 ebl Fix AfterJob timing
1138 kes Move the checking of the database in initializion of the Director
1139 to after we drop privileges. This avoids the need for both root
1140 and bacula access to the DB.
1141 kes Correct a misplaced variable definition in src/filed/backup.c
1142 kes Correct how the new batch insert db_create_attributes_record()
1143 uses the arguments. Caused a seg fault in bscan.
1144 kes Implement lock() and unlock() methods in DEVICE class.
1145 Implement block() and set_block(xx) methods in DEVICE class.
1146 kes Modify bnet_connect() so that it uses time() to check for the
1147 wait time expiring (on some OSes, some system calls may not
1148 return immediately).
1149 kes Modify Verify to obtain the previous JobId when it is actually
1150 running rather than at schedule time (as it was in 1.38.x).
1151 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1153 kes When checking pid in pid file, continue running if the pid is
1154 the same as ours. This occurs on IRIX after a system crash.
1157 kes Extend new GUI API.
1158 kes Make the ua structure a class, and implement send_msg(),
1159 error_msg(), warning_msg(), and info_msg().
1161 kes Apply fix from for building wx-console on the Mac from
1163 kes Implement new select mechanism for GUI programs.
1164 kes Reorganize initialization of stackedWidgets in bat.
1166 kes Add updated nagios plugin supplied by Christian Masopust.
1168 kes More bat implementation.
1169 kes File migrate bug with Pool Occupancy using mediaid instead
1170 of jobids. Fixes bug #795.
1171 kes Fix orphaned buffers in filed backup and verify due to
1172 crypto buffers not freed during errors. Fixes bug #789.
1173 kes Extend new GUI api code to tree commands.
1174 kes Ensure that tree and dot commands check console ACLs.
1175 kes Permit marking directory with trailing slash.
1176 kes Allow 20 console connections (instead of only 10).
1178 kes Add smartctl call to bacula-sd.conf as an example of getting
1181 kes Modify jobq.c to let simultaneous restore jobs run. This may
1182 cause them to fail if they cannot get a drive.
1183 kes Add Client Connect Wait to Storage daemon to permit users to
1184 modify the time the SD waits for a FD connection.
1186 kes Correct virtual changer check which was backwards. This caused
1187 volumes to be unloaded into slots already occupied.
1189 kes Apply Command ACL filter to JobId list in restore command.
1190 kes Correct typeo in var.c patch.
1192 kes Don't let Bacula prune File or Job records for the current Job.
1193 kes Fix variable substitution pad + inc bug reported (with patch)
1196 kes Correct SQLite log table index as reported by Luca Berra.
1198 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1200 kes Begin implementing new comm signals for API.
1201 kes Fix a few places in lib/message.c where the open fd may
1203 kes Continue implementing lib/bsock.c (real class). Make jcr,
1204 who, host, and port private. There are new methods to access
1205 them for non-class use. This required touching a number of files.
1207 kes Add LANG=C to autoconf/randpass so it works with languages other
1208 than English. Fixes bug #788.
1210 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1212 You will not be able to generate Include/Exclude list any more.
1213 It will be fixed soon.
1214 If you want to use this, you can apply
1215 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1217 kes Restore of sockets created false error messages because Bacula
1218 no longer restores sockets, but the code was still trying to
1219 set the attributes on a non-existent file. Reported by a user.
1220 ebl finish RecyclePool feature
1221 Media will takes Pool.RecyclePool
1222 when moving from Scratch to a Pool or when user will do
1223 update volume=xxx frompool
1224 To use it, add RecyclePool = aPool to your Pool resource
1227 RecyclePool = Scratch
1231 kes Expand new BSOCK class adding signal() and new BNET signals.
1232 kes Begin enhancing the dot commands adding a new API function
1233 that returns more information and will make it easier
1234 to interface to the Director from a program.
1236 kes Make DEVICE fd private. Its new name is m_fd, and can be
1237 obtained with dev->fd() outside the class. This is the
1238 first of many DEVICE members to be made private.
1239 kes Implement Michael Renner's idea on having a virtual disk
1240 changer. I made some minor modifications (e.g. I did not
1241 implement the Virtual Changer directive, but simply set
1242 the Changer Command to an empty string.
1244 kes Implement a BSOCK send() method that writes the whole record
1245 in a single write() request rather than in two.
1246 ebl add update volume=xxx recyclepool=yyyy
1247 volume takes recyclepool from pool when using update volume=xxx from pool
1249 kes Fix encryption deblocking bug, which caused some restored files
1250 to be truncated. This fixes bug #763.
1251 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1252 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1254 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1255 ebl Use btime_t instead of uint64_t in media patch.
1257 kes Optimize the use of the database a bit in the Status dir command.
1258 Only open it when needed, ensure that if any previous database
1259 was opened, it is closed.
1261 kes Correct VolCatBytes bug from media patch.
1262 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1263 in the case of orphaned records.
1264 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1265 and File records in 300K chunks to be more efficient. This
1266 idea came from Juan Luis Frances (if I remember right).
1267 kes Apply Eric's scratch patch that moves a purged Volume to
1268 the RecyclePool. Question: how is RecyclePool set? what
1269 happens to the ScratchPool?
1270 kes Apply Eric's media patch that collects read/write media
1271 times as well as byte counts. This patch requires a
1272 simultaneous upgrade of the DIR and SD. Note, there
1273 should be some way to turn off timing. I'm not sure
1274 times are in Bacula units.
1275 kes Apply Eric's batch-insert patch.
1277 kes Update projects list.
1279 kes Implement Include/Exclude file lists in FD as dlists using
1280 the new dlistString class. This permits efficiently having
1281 large include/exclude lists and completes project Item 25.
1282 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1283 console is authorized to cancel the job. This fixes bug
1285 kes Modify SD so that the VolCatJobs medium record is updated
1286 at the beginning of a Job rather than the end. This
1287 fixes bug #775 where exceeding MaxVolJobs caused jobs
1289 kes Added a mutex around getting and setting Volume information
1290 so that multiple simultaneous jobs will single thread.
1292 Switch to using Subversion
1293 kes Remove src/pygtk-console/ from configure
1295 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1296 plus the entrypoints.
1297 kes Apply patch supplied that corrects debug print
1298 in canceling jobs for max run time. Supplied as
1299 part of bug #621, which was previously fixed.
1301 kes Test on job_canceled() and sd_msg_thread_done inside
1302 loop starting the message thread to avoid a race condition.
1304 kes Remove rl_catch_signal from console.c as it conflicted
1305 with the header definition. Fixes bug #765.
1306 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1308 kes Clarify some stored/acquire messages to indicate if the
1309 problem is with read or append.
1311 kes Fix memory leak with storage ids in cats/sql_get.c
1312 kes Terminate watchdog earlier to avoid reference to released
1313 memory -- reported by Jason Austin.
1314 kes Move closing the database from jobq.c to the director daemon
1315 termination routine. This fixes memory leaks for shadow jobs
1316 (i.e. migration jobs).
1317 kes Free up the unique jobid chain items in migrate.c. This fixes
1318 a memory leak problem.
1319 kes Convert some ugly looking for statements to use foreach_alist
1320 in findlib/find.c. This will facilitate converting the structures
1321 to use dlist (for large include/exclude lists).
1322 kes Fix a bug in the btree.c and btree.h routines, then rename them
1323 rblist and add them to be built in src/lib. Include some new
1324 methods written by Rudolf Cejka that make the code more readable
1325 (hides some of the ugly casting).
1326 kes Add set_next() and set_prev() methods which make the code much more
1327 readable. Also add a new dlistString class that facilitates storing
1328 strings in dlists. To be used in the large include/exclude lists.
1329 kes Make some trivial modifications to lib/tree.h that use rblist
1330 rather than dlist for storing the tree links. This was suggested
1331 by Rudolf Cejka. The result of this is that the restore tree now
1332 uses red-black binary trees rather than simple linked lists. This
1333 should give rather dramatic speed improvements for directories
1334 contining large numbers of directories/files (more than 10000).
1336 kes Fix maxruntime bug #621.
1338 ebl Implement the include JobID in spool file name project.
1339 kes Reorder projects file in order determined by Jan 2007 vote.
1340 kes Implement item #12 on project list -- quick release of FD by
1342 kes Fix open of SQLite3 db where user does not have write permission
1343 so that DIR does not crash. Fixes bug #761.
1345 kes Add back missing @ in Win32 Makefile.
1346 kes Change 'Device not configured to autolabel' from INFO
1348 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1349 which should restart an indefinite # of times.
1350 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1351 other DIR specifications.
1353 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1354 Fix path quoting in SQLite scripts.
1355 Fix problems with SHGetFolderPath.
1357 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1359 kes Fix Job restart on error bug that promotes an Inc to a Full
1360 backup. This should fix bug #755.
1361 kes Add qt-console and first cut of code.
1365 kes Fix Bacula->Documentation link on Win32 to point to index.html
1366 instead of bacula.html. Fixed bug #750.
1367 kes Return JobId in db_get_job_record() when JobId==0. This should
1369 kes Do not release source pointers when restarting a failed job.
1371 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1372 This *should* fix bug #747.
1373 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1376 kes Modify USTORE constructor to set an empty store_source string,
1377 and don't copy the store_source string in a cancel. Hopefully
1378 this will fix Arno's seg fault, bug #744.
1379 kes Add back code to disable conio in configure. Fixes bug #743.
1380 kes Correct the Options scanner in the FD to correctly handle
1381 SHA1 option, which was eating the next option. Reported by
1383 kes Add code to indicate when the SD is spooling, spool wait, and
1384 despooling as requested by Alan Brown.
1386 Version 2.0.0 released: 4 January 2007