1 Technical notes on version 2.3
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
20 Improved status commands for Bat
21 Spooling/despooling status
22 Implement ftruncate for NFS devices
23 Add long term statistics job table
28 kes Add Martin's fixes to argument scanning for the estimate
29 command. This fixes bug #1093.
30 kes Add debug code to SD.
31 kes Fix renaming a Volume, which used the wrong Volume name.
33 kes If operator has rewind tape, print warning, release tape and
34 try once more. If tape is positioned somewhere, something went
35 wrong, so mark the tape in error and try once more. Previously
36 this error was fatal, now it produces an error message.
37 kes Ensure correct volume name displayed during restore
38 kes Ensure that Volume is mounted for restore.
40 kes Fix a few more Coverity reported problems.
42 kes Apply Allan Black's status dir job count patch.
43 ebl Add information about IMPORT/EXPORT slots in mtx-script.
44 kes Enhance a couple of SD debug messages.
45 kes Tweak unload flag setting and ensure it is set during swap.
47 ebl Fix #1091 about bad output in estimate command.
49 kes Modify autochanger locking to attempt to avoid race
51 kes Make sure device not busy before doing label command.
52 kes Display open() errors except when polling. Previously too
53 many were suppressed. This should fix bug #1070.
54 kes Fix Win32 reparse points. Bacula will not recurse into any
55 reparse point directory, including mount points, unless the
56 directory is explicitly mentioned at the top level (same as
57 with Unix). A file that is linked to another file will be
58 backed up -- much as Unix does for hardlinked files.
61 kes Remove double quotes from ChangeLog and ReleaseNotes
62 kes Remove StorageId test when pruning and recycling (Eric's changes).
63 kes Remove old form of locking when getting volumes -- causes deadlock.
64 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
65 the name unique and to eliminate compile time error.
66 kes Add accurate.o to Win32 FD Makefile
68 kes Fix cats dll build on Win32 after db_update_job_end_record
69 calling sequence change.
70 ebl Switch to tokyo dbm instead of htable in accurate code
71 ebl Include tokyo dbm to bacula source tree
73 kes Fix buffer overruns detected by Coverity.
75 kes Tweak joblog display.
77 kes Implement --without-qwt
78 kes Fix layout of restore tree dialog
79 kes Add configure bat QWT libraries, so that bat can be built
80 with or without the QWT libaries.
82 ebl Add dummy tape driver for regression tests.
83 kes Make sure we unload the right slot when swapping.
85 kes Add debug times, reduce size of two-pool-changer test
87 ebl Tweak autoconf scripts for faketape
89 kes Improve SD reserve debug code.
90 kes Testing an improvement to free up volumes no longer in use.
92 kes Rework SD acquire for read to handle autochanger Volume
94 kes Implement regression that explicitly tests swapping a Volume
95 from one drive to another.
96 kes Enhance disk-changer to detect most error conditions.
97 kes Fix SD code so that it properly swaps a Volume between drives.
100 kes Apply libdbi patch from Joao Freitas for regress and for
101 Bacula trunk. Regress now works with libdbi. Nice.
102 kes Apply .nobackup patch from bug #1077 submitted by
104 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
105 name into jobs cloned via the run directive.
107 kes Prevent a Volume that is being swapped from being freed from
108 the volume list. This will most likely fix, at least partially,
110 kes Fix strippath so that it does not get a buffer overrun and crash FD.
111 This fixes bug #1078.
112 kes Remove 50 millisec wait in SD that broke debugger.
113 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
114 that a job may run, counted from when the job was scheduled.
115 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
116 a job may block waiting for a resource, counted from when the job starts
117 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
118 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
119 that implements multiple commands per line in the console when using
120 readline. Modify the default to use a semicolon as the command separator.
122 ebl Fix SQL query in migration code.
123 ebl Make accurate mode with hash disk pass regression tests
125 ebl Implement first cut of accurate backup with hash disk.
127 kes Force unload of volume when wrong volume mounted in SD.
129 kes Fix bat seg fault at termination.
130 kes Add Bacula generated version to bat about box.
133 kes Experiment with allowing multiple read jobs.
134 kes Move final volume swapping code to DCR method and
135 call it from acquire_for_read().
136 kes When wrong volume is mounted during read, unload_autochanger.
138 kes Integrate the libdbi changes from Joao Henrique Freitas
140 kes Stop searching for Volumes in SD askdir if DIR returns the
141 same volume name twice in a row.
142 kes Close bat console windows first to eliminate error message
145 kes Tweak the swap Volume from one drive to another code so that
146 it now seems to work.
147 kes Resolve several problems with recycling that broke the new
148 code (these problems are in 2.2.9 as well).
149 kes Remove the volume lock when calling the sysop code.
150 kes Don't mark a reserved volume with no writers as unused otherwise
153 kes Rework class structures for VOLRES, DCR, and DEVICE to make
154 the method names a bit more logical, and for more logically
155 handling the responsibilities.
157 kes Remove redundant code in terminating the scheduler that just
158 causes a seg fault in many cases.
159 kes Cleanup releasing a volume and make it a DCR method.
160 kes Improve algorithm for detecting pre-reserved volume and
163 kes Tweak volume swapping code so it works.
164 kes Correct name overloading in mount.c
165 kes Replace released flag in VOLRES with reserved and add access
166 methods for the VOLRES class.
167 kes Prevent volume from being released while being swapped.
168 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
170 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
172 kes Refactor parts of stored/mount.c
174 ebl Add sanity checks for VolWriteTime and VolReadTime
175 ebl Take care of bad clock changes while computing VolWriteTime
176 and VolReadTime. This should fix or limit #1066
177 kes Correct error string numbers in dird/catreq.c
178 kes Restructure reserving, acquiring, and mounting volumes. Calls to
179 autochanger are deferred for mount.c -- simplifes the code.
181 kes Do not prune any running job. It just fails the job.
182 kes Lock the volumes when changing dev->reserved_device and marking
183 the volume unused otherwise the device can get reserved by
184 another job before the volume is released, thus blocking it.
186 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
187 kes Fix bug #1063, reuse of freed ptr in list nextvol.
188 kes Release regex compile buffer in filed/job.c
189 kes Add proper type of const char in sql_create.c
190 kes Turn off debug in daemon termination routines
191 kes Move free_volume_list() before devices are freed in stored.c
192 kes Fix reference to uninitalized stack variables in bregex.c.
193 This should correct bug #1067.
195 kes Fix possible seg fault in SD when freeing a volume entry.
197 kes Implement unload_dev() before swap device.
198 ebl Add statistics prunning with option and menu
199 kes Separate unload_dev() from unload_other_device() in autochanger.c
201 kes Apply patch from bug #1069 that corrects spurious error messages
202 when ACLs enabled on SGI but no ACL exists.
203 ebl Fix small segfault in bacula-sd when debug level is 500
204 kes Modify run_program() and run_program_full_output() to use
205 call by reference for the results string. This corrects a long
206 standing problem where the address of the string may be changed
207 in the subroutine but not in the calling program.
209 kes Re-enable code to remember last volume mounted on a non-tape
211 kes Add patch supplied in bug #1068 that fixes a SD crash when using
212 a Virtual autochanger.
213 kes Generate correct JobMedia records during spooling/despooling when
214 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
215 <tih@hamartun.priv.no> for excellent analysis and testing.
217 kes Tweak hash algorithm for htable using Martin Simmons idea
218 for doing a circular shift.
219 kes Remember what volume is in VTLs (previously turned off for
221 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
222 pointed out some problems in creating JobMedia records during
223 spooling with concurrent jobs. Fix the problem by updating the
224 start file position before despooling and generate a jobmedia
225 record at the end of despooling.
227 kes Fix handling of JobMedia records during spooling and when a
228 Volume is changed without actually writing data to the Volume.
230 kes Rework certain SD locking based on gdb tracebacks of deadlocks
231 sent by Eric. This code now uses only the volume_lock() rather
232 than the reservations lock when at EOM and acquiring a new
234 kes Ensure only one exit point in several subroutines.
236 kes Implement bsock code to permit locking. Use the new code in Verify
237 in the FD to prevent the heartbeat thread from disrupting the Verify
238 data sent to the Dir.
239 kes Modify SD locking to eliminate locking the reservations system from
240 outside the system. Use the volume lock when getting media data
241 and reserving a new volume at end of media.
242 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
243 when SD starts are not locked into place.
245 kes Fix error compiling runscript code on 64 bit machines.
246 kes Tweak Win32 mount point code.
247 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
248 cleared giving bad file estimate).
249 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
252 kes Keep Schedule run lists in order as suggested by
255 kes Implement autostart scripts for Debian.
256 ebl Implement upgrade catalog scripts.
258 ebl Apply jobstat patch for long term statistics. Have to implement
259 purge stats command and upgrade scripts.
260 kes Fix mtx-changer.in for broken Debian mt program.
262 kes Fix large number of JobMedia records reported by Eric Bollengier.
264 kes Apply doc fix from bug #1062.
265 kes Resolve crash and improper restore wx-console Win32 restore
266 GUI. Fixes bug #1065.
267 kes Update Win32 wxWidgets to latest version.
268 kes Attempt to do correct handling of Win32 mount points. Should
270 kes Fix Win32 FD backup/restore memory leak due to improper termination
271 of BackupRead/Write. This fixes bug# 1038.
273 ebl Reduce memory usage for accurate backup, working only with ctime
274 and mtime. (not all Lstat field)
275 About 40MB for my linux system (400.000 files)
277 kes Add dcr->reserved_volume flag that allows us to release a volume
278 even if it is not vol->released. This allows maxvol2 to work when
279 Volumes expire and we are already writing to the device (i.e. a
280 volume is pulled out from under us by another job terminating after
281 we reserve the drive).
283 ebl Permit multiple command/console per runscript definition.
284 RunScript { command = /bin/true ; command = /bin/false ... }
285 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
286 (restart an application) just after the VSS snapshot on windows.
287 kes Don't zap dcr values during release_volume() as they might
288 have the next Volume to be mounted.
289 kes Fix AIX prototype.
291 kes Second cut of drive switching during backup.
294 kes Update Win32 version of wxWidgets to most recent version.
295 kes Tweak Copy job details.
296 kes Rework dir_find_next_appendable_volume to make a bit more effort
297 to find a suitable volume before giving up.
299 kes Make ask_sysop_to_create... to return if waken from wait.
300 This helps get out of blocked conditions.
301 kes Experimental implementation of switch_device in reservations.
302 kes Implement FD version to allow easier protocol changes.
303 kes Add Plugin Options string -- not yet passed to FD.
304 kes Implement PluginOptions ACL.
306 kes Attempt to correct problems with restores with autochangers and
307 use counts going negative
308 kes Rework SD status command and implement API for bat. Implements
309 header, runing waitreservation, devices, volumes, spooling,
310 and terminated status keywords.
311 .status storage=xxx <keyword>
312 kes Clarify TLS error message by adding double quotes around name.
313 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
314 kes Pass jcr to tls routines so debug messages can be handled better.
315 kes Rework jobq resource allocation code, and possibly fix a bug
316 that caused reference counts to get out of sync.
318 kes Rename fd/dir plugin to use Bacula standard underscore.
319 kes Plugin work -- bring dir up to fd level.
320 kes Start implementation of VTL code
321 kes Fix Win32 build after adding new cats subroutine.
323 kes First cut at Duplicate Job implementation.
325 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
326 kes Start PluginOptions string, and refactor a bit of ua_run.c
327 ebl Apply Allan patch that permit to reset recyclepool.
329 kes Test patch -- possible fix or improvement for bug #1053
330 kes Refactor FD and SD status commands to permit new API code in
331 SD, and to fix Win32 build.
332 kes Win32 build is now working.
334 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
335 some ideas in patch from Scott Bailey.
336 kes Begin implementation of duplicate Job control.
337 kes Fix some of Win32 build after recent additions.
338 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
339 which causes the FD to detect whether or not the OS has the
340 honor no dump bit (*BSD systems), and if so, to skip backing up
341 any file with this bit set. The feature is enabled by setting
342 'honor no dump flag = yes' in the Options section of a FileSet.
344 kes Correct po warning message with datarootdir
345 kes Implement more code in dird.c to put configuration parsing in
346 a class rather than use globals.
347 kes Restructure SD status command for implementation of bat API
350 kes Suppress incorrect 'Will not descend from x into y' messages.
351 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
352 daemon globals used by parser.
353 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
355 kes Fix free of plugin_list when none exists.
357 ebl Apply accurate project patch.
359 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
360 on non-mempool object)
361 kes First cut of converting FD .status to work with bat API.
363 .status client=XXX header
364 .status client=XXX running
365 .status client=XXX terminated
366 kes Implement first cut of Copy Job.
367 kes Implement Catalog in Pool resource. It overrides catalog specified
368 in the Client resource.
370 kes Apply patch (with some difficulties) from Joao Henrique Freitas
371 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
373 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
374 ftruncate() actually works. In the case of some (cheap) NAS devices,
375 it does not, and so recycling NAS Volumes does not work. The code
376 simply unlink()s the file, then recreates it. This fixes bug #1011.
378 kes First incomplete cut of big malloc blocks for htable.
379 kes Tweak plugin code.
381 kes Plugin debug code + tweak a couple bat dialog layouts
383 kes Fix creating first JobMedia record during Migration to include
384 proper index. This caused slow restores of migrated jobs.
385 kes Temp fix to plugin name file_index.
386 kes Bacula backed up and restored a MySQL database.
388 kes Implement plugin restore.
389 kes Implement parsing of db_driver to give db_type index.
391 kes First cut of plugin restore code.
392 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
393 and do not strip paths on symbolic links.
394 kes Set catalog backup database and user name from values specified on
395 the ./configure line.
396 ebl Fix #1031 about wrong pool source information in job report.
399 kes Remove a redundant jcr argument to find_files, match_files, and
401 kes Implement '.status dir header|scheduled|running|terminated' that
402 prints the requested status section. With the exception of the
403 header, the other reports have fields separated by tabs (\t).
405 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
406 a resource embedded run command to find a since time if no explicit
407 since time was supplied on the command line.
408 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
409 that updates the state file at job termination time in addition to
410 when the daemon terminates.
412 kes First version where a plugin did a backup.
413 bpipe-fd.so created a backup file, wrote a test
414 string to it, and Bacua could restore this fabricated file.
416 kes Implement DB Driver = string for the DBI driver.
417 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
418 kes First cut of code for loading Win32 plugin dlls. Implement
419 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
420 and implement a dlfcn.h file based on opengroup's definitions of
423 kes First cut plugin directives.
425 kes Apply patch from bug #1049 to prevent stripping the path on a
427 kes Attempt to fix bug #1047 where stripping a path corrupts the
428 heap. Waiting for feedback.
429 kes Correct the Mount message not to suggest labeling a new tape
430 when doing a restore. Submitted by email by John Stoffel.
431 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
432 FD by using casting. Reported in bug #1042.
434 kes A bit of crypto cleanup. More later.
436 Release Version 2.2.8
438 kes Apply patch from Martin to correct bug #1040, bscan sets existing
440 kes Fixed important spelling error in doc -- bug #1045.
442 ebl Fix bextract to be able to extract non-portable Win32 data to
444 kes Move initialization of read/write res lock earlier in the code.
445 This fixes the crash with a null conf file. This fixes bug
447 kes Redefine CURES in lib/parse_conf to be URES and move it all
448 into lib/parse_conf.c -- this responds to bug #1042, but does
449 not fix it. The fix is not to compile with FORTIFY_SOURCE.
450 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
451 the trunk SVN. I don't think this was reported as a bug.
453 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
455 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
457 kes Add DataDespooling and DataCommitting status (committing is
458 the last despooling).
459 kes Finish implementation of new reservations code noted below.
461 kes Fix bsnprintf for float point numbers. I broke recently when
462 parameterizing some variables. This fixes bug #1036.
463 kes Undo recent reservations changes ... will apply them later
464 when they work better.
466 ebl Fixes #1034 which cause mysql to hang the connection after 8h
467 ebl Change default statistics target of filename.name and path.path
468 fields for PostgreSQL. This speeds lookup by indexes. Thanks
470 kes A few more tweaks to new reservation code. Make sure to clear
471 vol released flag when retaking volume. When reading label and
472 label is bad mark volume unused. When recycling, mark volume
473 unused so it can be renamed.
475 kes Fix reserve_volume() so it doesn't release a volume in use
476 (i.e. a volume entry not marked released). This should be
477 the last part needed to fix bug #1018.
479 kes Move Heartbeat documentation from Job to Director resource.
480 This fixes bug #1033.
482 kes Fix existing switch drive SD code to call autochanger to release
483 any old volume. This must be done to keep the autochanger from
484 releasing subsequently newly reserved volumes in doing a close().
485 This should fix bug #1018.
486 kes Fail if attempting to get console input in batch mode. This
487 should help fail RunScript console commands that are incomplete.
488 kes First cut implementing switch_drive() in SD (not actually called).
490 kes Implement first cut running console commands in a RunScript.
492 ebl Fixes bug #1028 where 'Selection Type' option was not usable
494 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
497 Release Version 2.2.7
499 kes Add new free_tls() entry point so that Win32 builds.
500 kes Fix compile warning in src/lib/util.c
501 kes Fix entry point for edit_job_codes() so that Win32 builds.
502 kes Fix seg fault Frank Sweetser reports in regression testing
503 on his systems. The problem was that the original author of
504 bsnprintf.c did not take into account the side effects of
505 using ++x in the argument to a #define.
506 kes Make SD protocol backward compatible with version 2.2.x.
508 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
509 because Bacula no longer restores sockets.
510 ebl Always use ignorecase fileset option on win32 FD.
512 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
513 that implements double quoting include names in conf files,
514 and also allows piping input by having the first character
515 be a vertical bar (|).
516 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
517 that implement %f in RunScripts to pass the FileSet name.
518 kes Skip leading | when lex input comes from a pipe as suggested
519 by Michael Stapelberg <michael@stapelberg.de>.
521 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
522 Nerijus Baliunas <nerijus@users.sourceforge.net>
524 kes Implement Plugin Directory and plugin events.
526 kes Implement a security enhancement: TLS authentication but no
527 encryption. Enabled by setting 'TLS Authentication = yes'.
528 Note when this is on, TLS encryption is turned OFF!
530 kes This patch corrects a problem where the maximum concurrent storage
531 jobs counter gets out of sync during restore jobs causing jobs to
532 'wait on max Storage jobs'. This patch fixes bug #1009.
534 kes This patch fixes bcopy so that it produces correct Volumes.
536 kes This patch eliminates spurious output to the console during a VerifyVolume
537 job that contains encrypted data. It fixes bug #1024.
539 kes This patch prevents the 'status dir' command from trying to use a scratch
540 volume and possibly moving it from one pool to another. This patch fixes
543 kes Add new include to postgresql.c suggested by Marc Cousins so
544 that it compiles correctly with pgre version 8.3.
546 kes Fix --archivedir addition to configure. Replace it with
547 --with-archivedir in configure.in This fixes the regression
549 kes This patch fixes bug #1012 where the job is canceled because
550 of Max Run Time exceeded when the job has not yet started.
552 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
553 one 'part' to write. Instead of each part being stored on disk,
554 written to DVD, then deleted from disk, all parts are written to disk,
555 and only the last is written and deleted from disk.
556 kes This patch fixes the status command to include the formating string for
557 JS_AttrInsterting. It fixes bug #1021.
558 kes This patch should fix the Mac OS X build problem on the latest
559 Darwin, where sys/types.h was not included correctly (apparently
560 due to a change in the Mac headers). The solution was to explicitly
561 ensure that it is defined for the ./configure.
562 This patch also has a rebuild of configure that includes the Debian
563 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
564 kes This patch should ensure that queued messages to the console are
565 displayed as soon as possible. It should fix bug 1007, but has been
566 reported not to work.
568 kes This patch fixes the infinite loop when trying to increase the
569 maximum number of volumes in a Pool during the add command.
570 This patch fixes bug #1008.
572 Release Version 2.2.6
574 db Remove extra data on estimate command in joblist for bat.
576 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
577 really change anything, but is the beginning of doing it *right*.
578 To do it completely right the LastWritten date must be passed to
579 the SD, but it is not yet done.
580 kes Minor tweaks to some bat restore SQL.
581 kes This patch fixes bug #1003 where putting the message output from
582 a Verify job into the catalog results in a recursive loop. The problem
583 seems to show up only with postgresql (to be verified).
584 kes Correct %x to %p in postgresql debug statement.
586 kes Fix bug #942 where lots of emails where generated when the heartbeat
587 interval was low and Bacula wanted a different tape from the one in
590 ebl Add new SD despooling attributes and Dir inserting attributes
591 job status codes in the catalog (Status table).
593 ebl Use qmake-qt4 instead of qmake when available (debian system).
595 kes Add a security warning to src/cats/make_catalog_backup.in indicating
596 that passing the password via the command line (arg 3) is insecure.
597 This responds to bug #990 (it doesn't fix it).
599 kes Set default debug_level to zero. This corrects bugs #991 and #993.
600 kes Fix a crash in bat when it cannot connect to the Director for example
601 if the Director is not running.
602 kes Remove redundant INDEX (JobId) from File table in the trunk.
604 kes Make explicit exception to GPL in LICENSE to permit linking
605 the Win32 FD with Microsoft VSS code.
606 kes Apply the Solaris package patch from
607 Masopust, Christian <christian.masopust@siemens.com>
608 kes Apply the patch to optionally add a timestamp in the debug output
609 submitted by Mariusz Czulada <manieq@wp.eu>.
611 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
612 backend (sql_strerror). Fixes bug #989
614 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
615 It applied with no problems.
616 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
618 kes Redirect stderror to stdin on mt status command in mtx-changer.in
619 since the status is returned on stderr on Solaris.
620 kes Activate Close button on tray-monitor window. This fixes
622 kes Check for NULL item in parse_conf.c before calling it. In the
623 case of Device, there is no item and this caused a seg fault when
624 Device appears in the conf file.
625 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
626 avoids pulling in config.h multiple times in some new code.
628 kes Fix spurious warning message printed when creating a volume with
629 a LabelFormat. This fixes bug #976.
631 Release Version 2.2.5
633 kes Add JobId in place of Job name in all the Jmsg() output.
634 kes Correct the APP_DESC for the Win32 storage service (remove an e).
636 kes Make maxvol-test and new more strict maxvol2-test work.
637 kes Print JobId in all Jmsg() job output.
639 kes Add new SD despooling attributes and Dir inserting attributes
640 job status codes. This fixes bug 961.
641 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
643 kes Fix doc issue. This fixes bug #963.
644 kes Fix listing performance problems in bat. Pointed out by
646 kes Remove old debug code.
647 kes Fix bat code that tests for Win32. This should fix bug #968
648 kes Query 5 list wrong Vol after migration. This fixes bug #960
650 ebl Fix #969 where user can't change Replace option in restore menu.
652 kes Save jcr in thread specific data (tsd) for each thread.
653 kes Make Dmsg() print JobId as -%u.
654 kes Make Jmsg, Emsg, and others automatically pickup the jobid
655 for the thread if it exists.
656 kes Remove old reservation debug jid code.
657 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
658 ebl Add an option that permit to specify spool size in job
659 definition. (Applying patches/testing/spoolsize_per_job.patch).
660 You must upgrade SD and DIR at the same time.
661 dvl Add new configuration item --archivedir
662 dvl Adjust regression tests to use tmp not /tmp. This will allow
663 multiple concurrent runs of the regression tests.
665 kes Fix race condition that drops final block written to volume.
666 This happens in rare cases with multiple simultaneous jobs
667 when the Volume fills. This fixes bug #964. May be related
668 to bug #935 and possibly #903.
669 kes Eliminate more strerror() and replace with bstrerror().
670 kes Remove BSD getopt and replace with unrestricted IBM version.
671 kes Fix Win32 build for changed calling sequences.
672 kes More tweaks to the mount volume routines to get everything
673 right. Changed variable name from find to have_vol, which is
674 much easier to understand.
675 kes Enhance btimer debug code.
677 kes Fix FD->SD authorization failure, which was due to spurious
678 wakeups from a pthread_cond_timedwait(). Simply check the
679 predicate before continuing. This fixes bug #953.
680 kes Add const char where needed (more to do). Remove temp debug code.
682 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
683 kes Don't overwrite error message in check_tables_version.
685 kes Unlock batch insert tables with same calls used elsewhere.
686 kes Allow starting 59 jobs a second.
687 kes Make SD session key more random.
688 kes Add retry for SQLite opening db if it fails. Probably helps
690 kes Suppress extra error messages during batch insert failure.
692 kes Add jcr to timer packets so if killed message can be sent to job.
693 kes Add JobId to all Dmsg() output.
694 kes Put some FD auth code on dbglvl rather than fixed.
695 kes Return insert attributes error message in db msg buffer to avoid
696 false error messages. Helps fix bug #966.
697 kes Separate batch init error messages. Probably helps fix bug #966.
698 kes Make SD code that contructs attribute insert check string lengths
700 kes If Dir gets an error during inserting attributes, cancel SD.
701 This reduces unnecessary error messages.
703 kes Correct search boolean for getting Volume info
704 ebl Cleanup batch insert code. Probably fixes bug #965.
705 kes Back out one small change to the reservation system (reserving a volume).
706 kes Rework how a Volume is mounted. It is now much more intelligent and
707 will always attempt to use any mounted volume if possible and reduces
708 calls to the Director asking about volumes.
710 kes Turn off some code when batch insert not enabled.
711 kes Edit FD name in connect error messages.
712 kes Rework the reservation system to take into account that the Director
713 might give us a Volume that is different from the current one being
714 used, and to ensure that we don't exceed Maximum Volume Jobs.
715 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
716 fatal error with multiple jobs running'
717 kes Add more debug code in reservation system.
718 kes Implement maxvol-test to check bug #947.
720 kes Add code to handle tray monitor separated from Win32 FD.
721 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
723 kes Add missed return in fixing verify bug -- trunk only.
724 ebl Fix a command parser issue causing a director segfault.
725 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
727 kes Increase the max block size to 4MB fixes bug #957.
728 kes ERABT if user sets min block size > max block size. Fixes bug #956.
729 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
730 is not properly mounted (recognized) during a poll.
731 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
732 Job that has differences reports Verify OK.
733 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
735 ebl Add an option to operate on all pools with update vol parameters.
736 This complete the project 20. Patch from Nigel Stepp.
737 ebl Add history support to bconsole when using readline.
738 Using Ctrl-D to exit doesn't update .bconsole_history
739 kes Modify new volume algorithm to use max MediaId for generating next
740 volume number rather than the count of Volumes. This should essentially
741 eliminate the failure rate if some volumes were deleted. Bug #921.
742 kes Begin implemention of Optimize Job Scheduling.
743 kes Implement restore callback that Dirk and I agreed on for bat
744 restore. This fixes bug #928. Restore of backup of zero files fails.
745 kes Fix SQL Catalog logging which broke with new db_escape_string
748 Release Version 2.2.4
750 kes Fix bacula_cats.def for new db_escape_string().
751 kes Increase size of name string when FD making connection to SD.
752 May fix bug #953. FD->SD connection failure.
754 kes Add code to help Dan debug 2drive-incremental-2disk test.
755 kes Add code to try to fix bug #908.
756 kes Add waits to multiple exit detection code to try to force pid
757 file to always be deleted.
758 kes Restore good dev.tar.gz to rescue set appropriate binary property.
760 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
761 trying to switch drives by checking for blocking before unblocking.
763 kes Cancel storage daemon in all cases where FD reports error. This
764 should fix virtually all cases of bug #920.
765 kes Fix db_escape_string() for MySQL which did not compile.
767 kes Fix error message that was clobbered when Dir tells SD it does not
768 have write permission on Volume. This should fix a minor point
769 in bug #942, but not the main problem.
770 kes Add code to cancel job in SD if FD connection fails. This should
772 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
773 dvl Pass jcr and db into db_escape_string() to enable better escaping
775 kes Fix migration code to get correct Volume name with multiple volumes
776 by skipping |. Fixes bug #936.
777 kes Implement patch supplied by Landon to fix bug #944 where using
778 TLS with bconsole uses 99+% of the CPU.
779 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
781 kes Move patches into patches directory.
783 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
786 ebl Using 'm' in bconsole will show messages like before,
787 and not memory usage.
788 kes Fix bug #935, and probably also bug #903 where files were not
789 restored. MediaId was not properly set in JobMedia record after
792 kes Suppress chown and chmod error messages if the FD is not running
795 kes Apply Martin Simmons' patch that should turn off the new API usage
796 when batch insert is turned off allowing building on older
798 kes Add ./configure search in qwt-qt4 for qwt package
800 kes Bacula is now free of 3rd party GPL copyrighted code!
802 kes Add guid_to_name.c/h which replace idcache.
803 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
805 ebl Detect if new PosgreSQL batch insert API is present.
806 kes Correct incorrect mempool call causing Director crash. Occurs on
807 systems without va_copy().
808 sb Update spec files for 2.2.1 release
810 kes Fix memory pool call in ua_output.c. bug #934.
811 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
812 Add test program to fnmatch.c
814 kes Integrate patch to README.vc8 from
815 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
816 edit it to get it into Unix patch format.
817 kes Implement mkpath.c to replace old FSF makepath.c
819 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
821 Release Version 2.2.1
823 kes Update POTFILES.in
824 kes Cleanup a few underquoted AC_DEFUNs in configure
825 kes Apply patch from Martin Simmons that adds a test for va_copy to
828 kes Fix bug #921 by increasing the number of tries to create a new volume
830 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
831 can be called multiple times. Implement a version for machines
832 without va_copy() that gets a big buffer.
834 kes Integrate more portable zone offset code into bsmtp.c
835 Submitted by Attila Fülöp.
837 kes Fix bad SD->FD return status reported by
838 (James Harper) <james.harper@bendigoit.com.au>
839 ebl Fix a bug in read_close_session which return random status
840 thanks to James Harper
842 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
843 and directory names during restore of single file/directories.
844 kes Add sanity checks to .sql command when string is empty. Hopefully
845 that will resolve Dirks Director crash.
847 kes Apply patch submitted by Martin Simmons that corrects a seg fault
848 in the bsmtp chat subroutine when debug is >= 10.
850 kes Fix Director crash when running bat SQL queries.
851 kes Add David's notes on Item 8: Copy pools.
853 kes Rework projects file to be current and ready for a vote.
854 kes Enhance lex scanner error message.
856 kes Tweak LICENSE file to mention BSD code.
857 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
858 if specified on the ./configure.
859 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
860 This class is intended to allow us to open a second bsock to the
861 Director while in the restore subdialog.
863 kes Fix configure to create bat Makefile before creating dependencies.
864 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
865 kes Add a tooltip to the tray monitor.
866 dvl Set the Director's PID file before dropping privs. This fixes
869 kes Update AUTHORs file
870 kes Increase the default max concurrent jobs to 20 in FD and SD to
871 correspond with the default .conf files.
872 kes Rewrite the Win32 service routines. This eliminates the 3 copies
873 some different, of the same file created by RN when porting the
875 kes Rearrange some of the Win32 directories and the placement of the files
877 kes Set DEVELOPER flag in version.h
879 ========================================================================
880 Release Version 2.2.0
882 kes Apply a second doc patch from Marc.
883 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
884 improves the tips section that discusses how to setup multiple
887 kes Update bat README file.
888 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
889 corrects a typo in the Recycle status check in db_find_next_volume().
890 This will probably fix a number of annoying problems with multiple
892 kes Modify most of dird/msgchan.c to use bsock class calls rather than
893 bnet calls -- no functionality change.
895 kes Modify the Verify output to specify if files are missing on
896 the Volume(s) or disk. Fixes confusion in bug #916.
897 kes When more than one Volume is read in a migration job, the last
898 Volume bytes reported are from the last read volume rather than
899 the last written volume. Fixed. This fixes bug #910.
900 kes Fix display of Recycle flag after update volume=foo recycle=yes.
901 It previously printed New Recyle flag is: no. This fixes bug
904 kes Correct seg fault when switching tape drives during restore.
905 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
906 be used until after 2.2.0 release.
908 kes Remove fnmatch() in SD that permitted wild card specifications.
911 kes Fix %g in filename returned by SQL for browse tree reported by
913 kes Fix configure so that it puts config.out in the cwd rather than
915 kes Attempt to fix the locking problem reported by Eric in bug #906.
916 kes Make berrno class to leave errno unchanged after constructor call.
917 kes Make bnet_server use the heap rather than the stack to allocate
918 its socket fd pointers to avoid a crash at termination. Problem
919 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
921 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
922 and putting it in depkgs-qt along with Qt4.3.
924 kes Rework code in acquire.c that switches drives for reading when
925 the Media Type does not match. This should fix bug #906
927 ebl Fix a director segfault during job setup #907
928 kes Correct seg fault in postgresql when first operation returns no
929 rows. Fixes Dirks File browser problem seg fault with bat.
931 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
932 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
935 kes Implement PopUp YES/NO dialog for bat.
937 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
939 kes Correct RunScript to terminate job in FD on failure.
940 kes Change abort_on_error and AbortJobOnError to fail_on_error
941 and FailJobOnError in RunScripts.
942 kes Minor tweaks of code formating in RunScripts, principally to
943 avoid depassing 80 columns.
945 kes Eliminate one #ifdef Win32 in bsmtp
946 kes Implement grow tool to grow a file for testing very large databases.
947 kes Add big-vol-test to test Bacula seeking with > 5GB.
950 kes Modify find_next_volume() to return all values in Media record.
951 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
955 kes Update Release notes
957 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
958 Warning, in previous beta version, all media get from scratch keep their
961 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
962 This should fix bug #842. Made a note to look at removing the temp
963 files at the end of the install.
964 kes Add ability to mount and unmount a file device providing it is
965 marked as being removable and has the appropriate mount and unmount
966 commands defined in the Device resource. This fixes bug #830.
967 kes When applying a storage override, release all previous storage
968 definitions rather than just prepending the new storage.
969 This should prevent a good deal of confusion.
971 kes Implement ./configure search for qwt libraries.
973 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
974 Win32 FD. This should fix bug #893.
975 kes Remove an unnecessary beep in Win32 init code.
976 kes Update copyright dates in Win32 executable about boxes.
977 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
978 code with a BSD getopt.c and getopt.h.
979 kes Remove sched.h from the Win32 compat directory -- not used.
980 kes Remove the Exit menu item from the Win32 tray monitor. If you really
981 need to shut it down, do it through the services panel or the command
983 kes Remove some inappropriate Bacula FSFE copyrights.
984 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
985 kes Fix regress config non-portable test as pointed out by
986 Florian Heigl <florian.heigl@gmail.com>
987 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
988 as pointed out by Florian Heigl <florian.heigl@gmail.com>
990 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
991 Reported by Frank Sweetser.
995 kes Fix client-only build.
996 kes Integrate client-only fixes for bsys (initgroups) and conio from
997 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
998 kes Make arguments to get_scratch_volume() in same order as other
1000 kes Rework the prune_volumes() subroutine so that after purging and
1001 no volume found in desired pool, it will check for a scratch
1002 volume. This prevents recycling the whole scratch pool.
1003 kes Add code to status storage to print boffset_t (largefile support).
1005 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1006 kes You now need a --with-qwt=<dir> to be able to build bat.
1007 kes Update src/win32/cats/bacula_cats.def to include the new
1008 db_get_query_dbids() call on Win32.
1010 kes Correct a problem when selecting a scratch volume and moving
1011 it to another pool that lost some columns.
1012 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1013 kes Enhance Autochanger error messages to include Volume and device name.
1014 kes Rework prune_volumes() code to take account of InChanger flag,
1015 and to handle recycling volumes going to the Scratch pool and
1016 current pool because the RecyclePool directive.
1017 kes Implement a better and more efficient db_get_query_dbids() to
1018 handle creating and passing back a list of DBIds.
1022 kes Start work on new more efficient DBId subroutine. First use
1023 will be for recycling volume to Scratch inchanger.
1024 kes Increase number of JobIds in pruning from 1000 to 10000.
1025 This to be replaced by above routine.
1026 kes Begin implementation of building Qt4 on Win32.
1027 kes Correct typo in fix I added for bad TLS shutdown.
1028 kes Pull 2.0.3 patches into patches directory.
1029 kes Update Release notes. Include qt-console in line count.
1030 kes Update Projects file.
1032 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1033 bug in migration code where a job that spanned two volumes
1036 kes Implement new BST_DESPOOLING blocked state. Change from locking
1037 during despooling in SD to blocking. This means that other threads
1038 can work with the device structure, in particular the reservations
1039 system while despooling.
1041 kes Fix return in reservation message queue that missed clearing
1042 the jcr lock (implemented 26Jun07 below).
1043 kes Rename a number of dev methods to make locking function names
1045 kes Document locking in lock.c. Move lock structures to new file
1048 kes Move reservations message lock to lock jcr only this
1050 kes Move main SD locking code into lock.c (new file).
1051 kes Update Win32 build to include lock.c
1055 kes Dirk committed the qwt library code for drawing graphs in bat.
1056 kes Tweak install of qwt so that it is integrated with ./configure.
1058 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1059 out by Eric (my typo).
1060 ebl Fix configure.in to get batch mode enable
1061 kes Return correct string from authenticate.cpp in bat when connecting
1063 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1064 spurious line drops when using TLS.
1065 kes Do not file reparse points when restoring a file that already
1068 kes Implement Windows reparse points -- similar to directories, but
1069 we do not descend into it. This is a first cut. They seem to
1070 be backed up, but restore is not yet tested.
1071 kes Remove restore_blocking in tls code when shutting a socket to leave
1072 it in blocking mode. Hopefully this will fix the encryption bug
1073 reported by Frank Sweetser.
1074 kes When opening a file for backup, tell the OS that we are going to
1075 read it sequentially -- optimization.
1076 kes Change variable names in authenticate_director() to not conflict
1077 with member names in bat. Caused great confusion with compiler,
1080 kes Queue openssl error messages in case of comm problem.
1081 kes Do shutdown() call if socket terminated.
1082 kes Remove some duplicated code in tls.c
1083 kes Move more of the bsock member variables into private and access
1085 kes Add Frank Sweetser's tls-test to the regression suite.
1087 kes Add Swedish sv.po file
1089 kes Don't print clock skew message in FD if less than 3 seconds diff.
1090 kes Add a bit of VSS info to status client.
1091 kes Implement a first cut of Vista VSS, using Win2003 code.
1093 Release: 2.1.20 beta
1095 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1096 loaded tape but uses first drive).
1097 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1098 This was indeed a Win32 issue.
1100 kes Simplify search of autochanger for in-use Volume.
1101 kes Fix exit condition of check for in-use volume. kes Remove
1102 inappropriate my_postgresql_free_result() in db_close()
1104 kes Fix bad return in FD when encryption signature not found.
1105 Probably caused a crash.
1106 kes Inhibit missing encryption signature error messages for
1107 file types where no signature computed.
1108 kes Correct inverted check on autochanger in reservation system.
1109 kes Tweak debug code in autochanger reservation.
1111 kes Add some additional locking in the cats directory in subroutines
1112 that modify packet variables called from batch insert.
1113 kes Rework how dcrs are allocated. new_dcr() can now be called
1114 with an existing pointer, and it will simply clean it up.
1115 This allows the reservation system to test various different
1116 devices, and will permit easy device changes.
1117 kes A bunch of changes all over to handle new new_dcr() calling
1119 kes Work more on the Volume management in the SD. Remember Volumes
1120 for tape drives and for autochangers (even virtual disk changers).
1121 kes When looking at the Volume list to reserve a drive, handle
1122 autochanger names correctly by interating through the changer
1123 devices. Also call the Director to see if a Volume is suitable
1124 for the current job.
1125 kes Fix some bugs in bscan. Make sure all media records are written.
1126 Make sure that valid JobMedia records are written for disk files.
1127 Previously they were completely wrong.
1128 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1129 that the URLs don't change and so that the developers will all
1130 work off the same copy. Rebuild from scrach.
1131 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1133 Release: 2.1.18 beta
1135 kes Fix seg fault in FD from incorrect digest size.
1136 kes Fix argument to non-OpenSSL crypto.c subroutine.
1138 Release: 2.1.16 beta
1140 kes Remove a few malloc()s from the encryption code.
1141 kes Use the class calls to bsock in filed/backup.c and restore.c in
1142 place of the old bnet_xxx code.
1143 kes Implement code that does an on the fly calculation of the
1144 signing digest during restore of encrypted files. It makes
1145 a best guess at the algorithm, and if it is not correct, will
1146 then revert to the old code which reads the file after it is
1148 kes Implement at least one missing crypto stream in stream_to_ascii()
1149 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1150 #877 where a reload with bad syntax causes Dir to exit.
1152 Cut: 2.1.14 beta (not released)
1154 kes Do not free a volume on a tape drive until another volume is
1155 mounted and read, or the autochanger unloads the volume.
1156 This should help the SD re-use volumes that are already mounted,
1157 and should fix bug #886.
1158 kes Apply patch from user brettedgar that allows gnome2-console include
1159 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1160 kes Apply patch from Lucien Weller that fixes day of week calculation
1161 because of DST flag problem. Fixes bug #887.
1163 kes Move find_next_appendable_volume() to after acquiring a valid device
1164 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1166 kes Unable to reproduce bug 872. However added additional testing for
1168 kes Bug #874 resolved by documenting SQLite limitations.
1169 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1170 kes Bug #881 resolved by removing typo in mtx-changer script.
1171 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1172 approval. Added a link to the wiki on the web page, and implemented
1173 a backup from http://paramount.ind.wpi.edu
1175 kes Fix update allfrompool to pass pool name.
1177 kes Convert to pure GPL v2 license.
1178 kes Fix sscanf problems reported by Peter Buschman that caused
1179 a bus error on Solaris.
1180 kes Rework (simplify) the select prompt in bat.
1181 kes Move get_jobid_from_tid() into lib and create a
1183 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1184 should definitely fix the problem of lost error messages in the
1186 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1187 kes Eliminate tcpd.h from the project. Enclose the #include from the
1188 library with extern C ...
1189 kes Add print of signal name when a signal is trapped.
1191 Release: 2.1.12 beta
1193 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1195 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1196 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1197 makes SQLit3 run 30 times faster, though a bit less safe.
1198 kes Implement --with-batch-insert in configure and detection of thread
1199 safe libraries. It is on by default, but turned off if no thread
1200 safe library (e.g. SQLite 2) is available.
1202 kes Fix Bacula PostgreSQL buffer overruns.
1203 kes Do better checking for NULL results returned from PostgreSQL;
1204 implement retry for failed queries; clear results buffer after
1205 failed query. Hopefully this will correct the PostgreSQL failures.
1207 kes Implement algorithm to handle only one appendable volume with
1208 Prefer Mounted Volumes = no.
1209 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1210 returned from a query.
1211 kes Make volume lock recursive.
1212 kes Implement an additional volume reservation algorithm that
1213 starts by considering all reserved volumes then uses the
1214 old brute force algorithm of searching the resources to
1215 find a suitable device.
1216 kes Add new reservations debug code and refine the old code.
1217 kes Update the win32/dll/bacula.defs file.
1219 kes Tweak reservations algorithm to permit a few more cases, i.e.
1220 volume reserved, but on different drive, ...
1221 kes Enhance SD status to include Pool and Media Type for drive in a
1222 more readable format (a bit longer).
1223 kes Fix PostgreSQL double free.
1225 kes Minor refactoring of restore decryption code.
1226 kes Add code to smartall.c to detect double free of a buffer.
1228 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1229 so that bsmtp will create a correct email address (mailbox only).
1230 kes Modify 'memory' command so that the buffers are listed as 'In use'
1231 to avoid confusion with Orphaned buffers.
1232 kes I reworked the OpenSSL include/lib flags to be handled in
1233 the standard Bacula way, which should fix bug #863 concerning
1234 non-standard OpenSSL libraries.
1236 kes Implement Help Browser window for bat.
1237 kes Fix reload bug that reset StorageId to zero.
1239 kes Fix TLS #ifdefing when TLS turned off.
1240 kes Ensure that when labelling a tape with Slot=0 that InChanger
1242 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1244 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1245 add DISTINCT (required by PostgreSQL).
1246 kes Implement BSOCK authenticate_director() method. Eventually will
1247 authenicate all daemons.
1248 kes Move several more functions into the BSOCK class.
1250 kes Add code to tell the OS that we no longer need a cached
1251 file that we were reading. In findlib/bfile.c. Also,
1252 only cache files that we are reading. Thanks to
1253 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1254 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1255 kes Implement script to automatically generate cats and dll .def
1256 files for Win32 dll.
1257 kes Update README.mingw32 to include new .def file generation.
1258 kes Correct typo in UTF-8 error message as reported by:
1259 jhernandez <julianhernandez@gmail.com>
1260 kes Add additional sm_check() code on debug level 1.
1261 kes Set default debug level to 1.
1262 kes Trap SIGABRT in attempt to get traceback.
1264 kes Reduce bat connect timeout from 30 to 15 seconds.
1265 kes More restructuring and implementing BSOCK class in place of
1267 kes Remove a few unnecessary malloc() tests in crypto code.
1268 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1269 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1270 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1272 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1274 kes Fix Verify InitCatalog. The attributes were not pointing to the
1275 correct saved location.
1276 kes Implement message callback so that GUI is sure to get all
1277 daemon messages. Currently displayed in a dialog in bat.
1278 kes Ignore SIGUSR2 (Bacula timer) in bat.
1279 kes Apply regress patch from bug #859 to allow regress to work
1280 with Solaris compiler.
1282 kes Begin adding TLS support to bat.
1283 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1284 clean up lex.c and make it more readable.
1286 kes Move more bnet functions into the BSOCK class.
1287 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1288 kes Complete change of berrno strerror() method to bstrerror()
1290 Release: 2.1.10 beta
1292 kes Cleanup incorrect email addresses in bsmtp.
1293 kes Make bat display initial messages rather than discard them.
1295 kes First cut of adding .mod to the run command.
1296 kes Implement auto display of messages in bat.
1297 kes Enhanced preferences to allow all Bacula output to be
1300 kes Try to make bsmtp date routines more generic.
1301 kes Fixed bug #856 autochanger documentation.
1302 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1303 kes Add new cats entry point so Win32 builds.
1305 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1307 kes Do better checking for the MySQL 64 bit libraries looking for both
1308 .a and .so libraries.
1309 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1310 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1311 kes Require the thread safe version of MySQL during configure. Thanks
1312 to Andre Noll for pointing this out.
1313 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1314 continuing in migration code.
1315 kes Apply implementation of tray-monitor font derived from gnome-console
1316 submitted by Andreas Piesk <a.piesk@gmx.net>
1318 kes Eliminate important memory loss in SQLite
1319 kes Fixed the batch insert MySQL thread specific data that was not
1320 being freed. See cats/mysql.c:db_thread_cleanup().
1321 kes Fix restore before command.
1322 kes Convert old hdr.name to name() in a few places.
1323 kes Implement update jobid command.
1324 kes Return all time_t dates in db_get_job_record()
1325 kes Stop watchdog in SD earlier.
1326 kes Put Pool just after Storage in please mount message.
1327 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1330 kes Update the po files.
1331 kes Fix Verify InitCatalog by making it cache attributes.
1333 kes Change name bacula-bat to bat for man 1 page to correspond to
1335 kes Check for client and store NULL pointers in status command. This
1337 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1338 kes Fix sign extended editing of %p.
1339 kes Clean out a little old #ifdefing in cats/mysql.c
1341 kes If time diff between DIR and FD is more than 600 seconds convert
1342 INFO message to WARNING.
1343 kes Implement heap size display in status for all daemons.
1344 kes Attempt to fix MySQL db open memory loss (not successfull).
1345 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1346 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1347 Query. This looks like a MySQL but but by doing extra releases,
1348 the memory goes away. This should fix bug #847.
1350 kes When backup fails, cancel SD before waiting for sd termination.
1351 kes If SD is waiting for FD to connect during cancel, wake up the
1353 kes Fix fsf code so that errno is correctly reported.
1354 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1356 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1357 so that Bacula doesn't later stumble into a seg fault.
1358 kes Use the term Restore Client in the restore Job report.
1359 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1360 the original job's FileSetId.
1361 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1362 spooling in migration jobs. Not yet tested.
1363 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1364 reading conf file from a pipe. However, do it with open_bpipe()
1365 rather than popen. Not yet tested.
1367 kes Fix an ugly bug where the VolCatBytes were getting updated
1369 kes Implement bconsole memory command that prints current memory
1370 usage, plus smartalloc dump.
1371 kes Clarify some error messages in backup, admin, and migrate.
1372 kes Shrink label dialog to smaller size.
1373 kes Invert Cancel OK buttons on restore to be OK Cancel.
1374 kes More strerror() to bstrerror() conversions.
1376 kes Start implementing bstrerror() in place of strerror().
1377 kes Stripping path -- seems to work.
1379 kes Prevent door and port files from being restored (mostly
1381 kes Free an unreleased buffer in compat code.
1382 kes Change console Job name from *Console* to -Console- to eliminate
1383 Win32 filename problems. Put Win32 path separator when creating
1384 Console file. This fixes bug #846.
1385 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1387 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1389 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1390 to force Win32 error message.
1392 kes First cut strip path. The data should be passed to the FD,
1393 but nothing is done with it yet.
1394 kes Enhance the digest and signature routines in the crypto
1395 library to accept a JCR and to use it to print error messages
1396 so that they will go in the Job report rather than the daemon's
1398 kes Simplify some of the verify signature code.
1399 kes Simplify a few of the alternative returns in the signature
1402 ebl Use only POSIX regex instead of GNU regex in breg.c for
1403 File relocation. It fix broken freebsd compilation.
1404 kes Convert all other Dir files to use new ua class message
1406 kes Tentative fix for missing digest signature in bug 807.
1407 kes Correct handle problem in new win32_ftruncate routine.
1408 kes Convert ua_purge.c and ua_update.c to use new ua class
1409 message routines for bat.
1411 kes Correct incorrect installation of LICENSE in Win32 installer.
1412 kes Display LICENSE at the beginning of the Win32 install.
1413 kes Attempt to correct the need for the png files to be installed
1415 kes Reapply my bat.conf install script in qt-console. I think I
1416 editted bat.pro instead of bat.pro.in and it was lost.
1417 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1418 the /var/lock/subsys for subsysdir. Also corrects typos in the
1421 kes First cut update job.
1422 kes Correct configure to include qmake of src/qt-console directory.
1424 kes Make restore job yes/mod/no print in one command so GUI works.
1425 kes First cut implementing backup and restore client.
1426 kes Correct editing in Verify output that caused a seg fault.
1428 kes Insure that bat.conf is not overwritten during installation.
1429 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1430 while I was implementing migration in March 2006 !
1432 ebl Cleanup file relocation, using char *RegexWhere instead of
1433 char *where + bool where_use_regexp
1434 kes Update some manpages and add bat manpage.
1435 kes Make a first cut at converting bacula.spec.in for bwx-console
1437 kes Apply patch from John Goerzen to add hostname as fourth argument
1438 to make_catalog_backup script.
1439 kes Fix typos I introduced into bsmtp.c
1440 kes Make pm_strxxx() routines handle input of NULL pointer. This
1441 is to protect from NULL pointers returned from SQL databases.
1442 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1443 kes Add more debug to FIFO code -- fix fifo regression test.
1445 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1446 kes Add thread timer to bnet_connect() to break from OS if wait time
1449 kes Update Win32 build to include new files, new symbols, and
1451 kes Implement socket level heartbeat (tcp_keepidle)
1452 ebl Commit File relocation patch
1453 kes Make bat have 'make install' target.
1454 kes Warn during install if old gnome-console binary found.
1455 kes Warn during install if old wx-console binary found.
1456 kes Add -8 option to bsmtp command line to add content type utf-8.
1457 Fixes bug #809. (Character coding problem in bsmtp).
1458 kes If < is found in target (from, to, cc) then do not enclose the
1459 target in < > in bsmtp. Fixes bug #772 (malformed address).
1460 kes When printing certain items in dbcheck, stop after 300000.
1461 Fixes bug #822. (dbcheck loops).
1462 kes Incorrect status in Dir after waiting for mount with poll set.
1465 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1467 kes Print waiting to reserve a device every 5 mins.
1469 kes Don't call close_part in label.c if tape and relabel.
1470 kes Don't free volume if busy in close() -- should help with
1472 ebl Fix #824 RunScript bug (After script could be execute twice)
1473 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1474 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1475 Add a regression script to test RunScript
1477 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1480 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1481 deprecated. No additional bugs will be fixed, and they will be dropped
1482 in a future release (probably 2.4.0).
1483 kes Change name of wx-console to bwx-console to make it more Bacula
1485 kes Change the name of gnome-console to bgnome-console to make it
1488 kes Some time in March, a Feature Request with patch from Jorj Bauer
1489 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1491 The ability for the director to validate a Client (FD) CN against
1492 an arbitrary set of patterns rather than the hostname, with
1493 A new 'TLS Allowed CN' set of directives which are implemented
1494 in the Client resource. Then pattern matching is used in place
1495 of hostname matching against the Certificate's CN. As an example, we
1496 have certificates which (a) use a local CA, and (b) have a CN of the
1498 kes Add new/changed entry points to Win32 build
1499 kes Create unaccepted-projects for projects that are not accepted.
1500 kes Simplify locking in the reservations system.
1501 kes Add more debug code in reservations.
1502 kes Make sure error condition on reserving a volume is handled correctly.
1503 kes Correct handling of volume_in_use.
1504 kes Correct handling of initializing a device.
1505 kes Move handling of broadcasting releasing a device into release_device().
1506 kes Correct attaching dcr to dev so that it is only done if device
1507 is properly initiated.
1509 kes Locking debug level tweaks in SD.
1510 kes Tweak new Volume code.
1512 kes Add exec external-command [wait-seconds] to bconsole. This
1513 executes the external-command. Note! normally external-command
1514 should be enclosed in double quotes.
1515 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1516 it should normally be off in a production system.
1518 kes Implement die command for SD so that we can force it to dump.
1519 kes Implement SD lock debug code.
1520 kes Implement new algorithm for keeping Volume list in SD. It
1521 is now owned by the device.
1523 kes Implement new code for freeing in use volumes that should
1524 resolve if not all, some of the problems of multiple drive
1525 tape conflicts described in bug 801.
1527 kes Fix gui/bacula-web/images files in svn.
1528 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1530 ebl Fix a bug in batch mode (in string escape)
1531 kes Correct migration prune SQL typo that crept in in a
1532 recent 2.1.x change.
1534 kes Move bnet_despool() into class in bsock.c
1535 kes Modify job report to include director name and Build OS.
1536 kes Move drop root privilege and check_catalog() before fork.
1537 kes Add update database scripts (version 9 to 10) to updatedb directory.
1539 ebl Check size and age of each file after its backup to see if
1540 it has changed during backup, if 'checkfilechanges' is set.
1541 The FD will do an extra check (stat(2)) after
1542 each file backup. mtime, ctime and size are compared with
1543 'before backup' information. If time or size mismatch, an
1544 error message will be generated. You must upgrade FD to use it.
1546 kes Make database name and user configurable
1547 --with-db-name=xxx --with-db-user=xxx
1548 kes Add back database type to message.c for debugging.
1550 kes Implement dir_sql() which issues an SQL query.
1551 kes Modify bat medialist to use dir_sql() and do some minor C++
1552 formatting as well as eliminating a number of pointers, simplifing
1555 kes Fix some of the mtx-changer grep commands for tape label readers.
1556 kes Convert a number of bsendmsg into the appropriate send/warning/error
1557 message class calls.
1558 kes Suppress the using database message in the .sql command.
1559 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1561 kes Add context menu for floating a window.
1562 kes Some minor cleanup and name changes in qt-console
1563 kes Add doing mt setblk 0 in Win32 mtx-changer.
1564 kes Apply Martin's bug fix to move definition of ENODATA for
1566 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1567 sqlite2 and sqlite3.
1569 kes More pruning cleanup.
1570 kes Turn on wait_for_drive by default in mtx-changer.
1571 kes Turn on Batch insert code by default as it now passes regression.
1572 kes Add ./configure --enable-bat to enable building of Bat.
1573 No install yet though.
1575 kes Implement a new .sql command for bat.
1576 kes Implement code to turn off pruning in obtaining the next volume.
1577 Pruning is turned off for the status dir command, but turned on
1578 for SD requests and for the list nextvolume command.
1580 kes Correct Qmsg() that was not updated correctly when committing a
1581 previous change (probably the recent TLS patch).
1583 kes Write new subroutine is_volume_purged() that explicitly checks
1584 if the Volume is purged, and if so marks it as such. This should
1585 resolve problems reported about needing to mount twice to recycle
1587 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1588 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1589 amount of duplicated code.
1590 kes Do volume pruning only for the Media Type desired (reduces pruning time
1591 if multiple Media Types are in the same pool).
1592 kes Implement more detailed info in the Job report for the Bacula version
1594 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1596 ebl Add bbatch tool to bench database and insert mode.
1597 Fix sql quote stuff in batch mode
1598 Fix sql stuff for mysql
1600 kes Correct problems with am/pm scheduling. Fixes bug #808.
1601 kes Implement new prunning code that prunes up to 1000 jobs at
1602 the same time. The same technique can be applied to a number
1603 of other prune/purge subroutines.
1604 kes Add an insanity check when starting a new tape job to ensure
1605 that the tape position has not been changed. If so fail the
1607 kes Fix Win32 build for dlls to add the folllowing:
1608 src/lib/bsock.c -- new file with new entry points
1609 src/lib/dlist.c -- new entry points
1610 src/cats/sql_create.c -- new entry point
1611 src/cats/sql_cmds.c -- new DATA item exported
1613 ebl batch mode cleanup bscan-test is ok now.
1614 kes Implement SD code to check length of disk volume before appending.
1616 kes Correct return status on db_batch... routines.
1617 kes Add call to db_write_batch_file_records() to migration code.
1618 ebl Fix AfterJob timing
1619 kes Move the checking of the database in initializion of the Director
1620 to after we drop privileges. This avoids the need for both root
1621 and bacula access to the DB.
1622 kes Correct a misplaced variable definition in src/filed/backup.c
1623 kes Correct how the new batch insert db_create_attributes_record()
1624 uses the arguments. Caused a seg fault in bscan.
1625 kes Implement lock() and unlock() methods in DEVICE class.
1626 Implement block() and set_block(xx) methods in DEVICE class.
1627 kes Modify bnet_connect() so that it uses time() to check for the
1628 wait time expiring (on some OSes, some system calls may not
1629 return immediately).
1630 kes Modify Verify to obtain the previous JobId when it is actually
1631 running rather than at schedule time (as it was in 1.38.x).
1632 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1634 kes When checking pid in pid file, continue running if the pid is
1635 the same as ours. This occurs on IRIX after a system crash.
1638 kes Extend new GUI API.
1639 kes Make the ua structure a class, and implement send_msg(),
1640 error_msg(), warning_msg(), and info_msg().
1642 kes Apply fix from for building wx-console on the Mac from
1644 kes Implement new select mechanism for GUI programs.
1645 kes Reorganize initialization of stackedWidgets in bat.
1647 kes Add updated nagios plugin supplied by Christian Masopust.
1649 kes More bat implementation.
1650 kes File migrate bug with Pool Occupancy using mediaid instead
1651 of jobids. Fixes bug #795.
1652 kes Fix orphaned buffers in filed backup and verify due to
1653 crypto buffers not freed during errors. Fixes bug #789.
1654 kes Extend new GUI api code to tree commands.
1655 kes Ensure that tree and dot commands check console ACLs.
1656 kes Permit marking directory with trailing slash.
1657 kes Allow 20 console connections (instead of only 10).
1659 kes Add smartctl call to bacula-sd.conf as an example of getting
1662 kes Modify jobq.c to let simultaneous restore jobs run. This may
1663 cause them to fail if they cannot get a drive.
1664 kes Add Client Connect Wait to Storage daemon to permit users to
1665 modify the time the SD waits for a FD connection.
1667 kes Correct virtual changer check which was backwards. This caused
1668 volumes to be unloaded into slots already occupied.
1670 kes Apply Command ACL filter to JobId list in restore command.
1671 kes Correct typeo in var.c patch.
1673 kes Don't let Bacula prune File or Job records for the current Job.
1674 kes Fix variable substitution pad + inc bug reported (with patch)
1677 kes Correct SQLite log table index as reported by Luca Berra.
1679 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1681 kes Begin implementing new comm signals for API.
1682 kes Fix a few places in lib/message.c where the open fd may
1684 kes Continue implementing lib/bsock.c (real class). Make jcr,
1685 who, host, and port private. There are new methods to access
1686 them for non-class use. This required touching a number of files.
1688 kes Add LANG=C to autoconf/randpass so it works with languages other
1689 than English. Fixes bug #788.
1691 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1693 You will not be able to generate Include/Exclude list any more.
1694 It will be fixed soon.
1695 If you want to use this, you can apply
1696 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1698 kes Restore of sockets created false error messages because Bacula
1699 no longer restores sockets, but the code was still trying to
1700 set the attributes on a non-existent file. Reported by a user.
1701 ebl finish RecyclePool feature
1702 Media will takes Pool.RecyclePool
1703 when moving from Scratch to a Pool or when user will do
1704 update volume=xxx frompool
1705 To use it, add RecyclePool = aPool to your Pool resource
1708 RecyclePool = Scratch
1712 kes Expand new BSOCK class adding signal() and new BNET signals.
1713 kes Begin enhancing the dot commands adding a new API function
1714 that returns more information and will make it easier
1715 to interface to the Director from a program.
1717 kes Make DEVICE fd private. Its new name is m_fd, and can be
1718 obtained with dev->fd() outside the class. This is the
1719 first of many DEVICE members to be made private.
1720 kes Implement Michael Renner's idea on having a virtual disk
1721 changer. I made some minor modifications (e.g. I did not
1722 implement the Virtual Changer directive, but simply set
1723 the Changer Command to an empty string.
1725 kes Implement a BSOCK send() method that writes the whole record
1726 in a single write() request rather than in two.
1727 ebl add update volume=xxx recyclepool=yyyy
1728 volume takes recyclepool from pool when using update volume=xxx from pool
1730 kes Fix encryption deblocking bug, which caused some restored files
1731 to be truncated. This fixes bug #763.
1732 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1733 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1735 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1736 ebl Use btime_t instead of uint64_t in media patch.
1738 kes Optimize the use of the database a bit in the Status dir command.
1739 Only open it when needed, ensure that if any previous database
1740 was opened, it is closed.
1742 kes Correct VolCatBytes bug from media patch.
1743 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1744 in the case of orphaned records.
1745 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1746 and File records in 300K chunks to be more efficient. This
1747 idea came from Juan Luis Frances (if I remember right).
1748 kes Apply Eric's scratch patch that moves a purged Volume to
1749 the RecyclePool. Question: how is RecyclePool set? what
1750 happens to the ScratchPool?
1751 kes Apply Eric's media patch that collects read/write media
1752 times as well as byte counts. This patch requires a
1753 simultaneous upgrade of the DIR and SD. Note, there
1754 should be some way to turn off timing. I'm not sure
1755 times are in Bacula units.
1756 kes Apply Eric's batch-insert patch.
1758 kes Update projects list.
1760 kes Implement Include/Exclude file lists in FD as dlists using
1761 the new dlistString class. This permits efficiently having
1762 large include/exclude lists and completes project Item 25.
1763 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1764 console is authorized to cancel the job. This fixes bug
1766 kes Modify SD so that the VolCatJobs medium record is updated
1767 at the beginning of a Job rather than the end. This
1768 fixes bug #775 where exceeding MaxVolJobs caused jobs
1770 kes Added a mutex around getting and setting Volume information
1771 so that multiple simultaneous jobs will single thread.
1773 Switch to using Subversion
1774 kes Remove src/pygtk-console/ from configure
1776 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1777 plus the entrypoints.
1778 kes Apply patch supplied that corrects debug print
1779 in canceling jobs for max run time. Supplied as
1780 part of bug #621, which was previously fixed.
1782 kes Test on job_canceled() and sd_msg_thread_done inside
1783 loop starting the message thread to avoid a race condition.
1785 kes Remove rl_catch_signal from console.c as it conflicted
1786 with the header definition. Fixes bug #765.
1787 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1789 kes Clarify some stored/acquire messages to indicate if the
1790 problem is with read or append.
1792 kes Fix memory leak with storage ids in cats/sql_get.c
1793 kes Terminate watchdog earlier to avoid reference to released
1794 memory -- reported by Jason Austin.
1795 kes Move closing the database from jobq.c to the director daemon
1796 termination routine. This fixes memory leaks for shadow jobs
1797 (i.e. migration jobs).
1798 kes Free up the unique jobid chain items in migrate.c. This fixes
1799 a memory leak problem.
1800 kes Convert some ugly looking for statements to use foreach_alist
1801 in findlib/find.c. This will facilitate converting the structures
1802 to use dlist (for large include/exclude lists).
1803 kes Fix a bug in the btree.c and btree.h routines, then rename them
1804 rblist and add them to be built in src/lib. Include some new
1805 methods written by Rudolf Cejka that make the code more readable
1806 (hides some of the ugly casting).
1807 kes Add set_next() and set_prev() methods which make the code much more
1808 readable. Also add a new dlistString class that facilitates storing
1809 strings in dlists. To be used in the large include/exclude lists.
1810 kes Make some trivial modifications to lib/tree.h that use rblist
1811 rather than dlist for storing the tree links. This was suggested
1812 by Rudolf Cejka. The result of this is that the restore tree now
1813 uses red-black binary trees rather than simple linked lists. This
1814 should give rather dramatic speed improvements for directories
1815 contining large numbers of directories/files (more than 10000).
1817 kes Fix maxruntime bug #621.
1819 ebl Implement the include JobID in spool file name project.
1820 kes Reorder projects file in order determined by Jan 2007 vote.
1821 kes Implement item #12 on project list -- quick release of FD by
1823 kes Fix open of SQLite3 db where user does not have write permission
1824 so that DIR does not crash. Fixes bug #761.
1826 kes Add back missing @ in Win32 Makefile.
1827 kes Change 'Device not configured to autolabel' from INFO
1829 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1830 which should restart an indefinite # of times.
1831 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1832 other DIR specifications.
1834 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1835 Fix path quoting in SQLite scripts.
1836 Fix problems with SHGetFolderPath.
1838 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1840 kes Fix Job restart on error bug that promotes an Inc to a Full
1841 backup. This should fix bug #755.
1842 kes Add qt-console and first cut of code.
1846 kes Fix Bacula->Documentation link on Win32 to point to index.html
1847 instead of bacula.html. Fixed bug #750.
1848 kes Return JobId in db_get_job_record() when JobId==0. This should
1850 kes Do not release source pointers when restarting a failed job.
1852 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1853 This *should* fix bug #747.
1854 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1857 kes Modify USTORE constructor to set an empty store_source string,
1858 and don't copy the store_source string in a cancel. Hopefully
1859 this will fix Arno's seg fault, bug #744.
1860 kes Add back code to disable conio in configure. Fixes bug #743.
1861 kes Correct the Options scanner in the FD to correctly handle
1862 SHA1 option, which was eating the next option. Reported by
1864 kes Add code to indicate when the SD is spooling, spool wait, and
1865 despooling as requested by Alan Brown.
1867 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob