1 Technical notes on version 2.3
5 kes Fix ANSI tape labeling. This fixes bug #954.
6 kes Increase the max block size to 4MB fixes bug #957.
7 kes ERABT if user sets min block size > max block size. Fixes bug #956.
8 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
9 is not properly mounted (recognized) during a poll.
10 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
11 Job that has differences reports Verify OK.
12 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
14 ebl Add an option to operate on all pools with update vol parameters.
15 This complete the project 20. Patch from Nigel Stepp.
16 ebl Add history support to bconsole when using readline.
17 Using Ctrl-D to exit doesn't update .bconsole_history
18 kes Modify new volume algorithm to use max MediaId for generating next
19 volume number rather than the count of Volumes. This should essentially
20 eliminate the failure rate if some volumes were deleted. Bug #921.
21 kes Begin implemention of Optimize Job Scheduling.
22 kes Implement restore callback that Dirk and I agreed on for bat
23 restore. This fixes bug #928. Restore of backup of zero files fails.
24 kes Fix SQL Catalog logging which broke with new db_escape_string
27 kes Fix bacula_cats.def for new db_escape_string().
28 kes Increase size of name string when FD making connection to SD.
29 May fix bug #953. FD->SD connection failure.
31 kes Add code to help Dan debug 2drive-incremental-2disk test.
32 kes Add code to try to fix bug #908.
33 kes Add waits to multiple exit detection code to try to force pid
34 file to always be deleted.
35 kes Restore good dev.tar.gz to rescue set appropriate binary property.
37 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
38 trying to switch drives by checking for blocking before unblocking.
40 kes Cancel storage daemon in all cases where FD reports error. This
41 should fix virtually all cases of bug #920.
42 kes Fix db_escape_string() for MySQL which did not compile.
44 kes Fix error message that was clobbered when Dir tells SD it does not
45 have write permission on Volume. This should fix a minor point
46 in bug #942, but not the main problem.
47 kes Add code to cancel job in SD if FD connection fails. This should
49 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
50 dvl Pass jcr and db into db_escape_string() to enable better escaping
52 kes Fix migration code to get correct Volume name with multiple volumes
53 by skipping |. Fixes bug #936.
54 kes Implement patch supplied by Landon to fix bug #944 where using
55 TLS with bconsole uses 99+% of the CPU.
56 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
58 kes Move patches into patches directory.
60 ebl Fix bug #946 about "bacula-dir -t" which doesn't works
63 ebl Using "m" in bconsole will show messages like before,
65 kes Fix bug #935, and probably also bug #903 where files were not
66 restored. MediaId was not properly set in JobMedia record after
69 kes Suppress chown and chmod error messages if the FD is not running
72 kes Apply Martin Simmons' patch that should turn off the new API usage
73 when batch insert is turned off allowing building on older
75 kes Add ./configure search in qwt-qt4 for qwt package
77 kes Bacula is now free of 3rd party GPL copyrighted code!
79 kes Add guid_to_name.c/h which replace idcache.
80 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
82 ebl Detect if new PosgreSQL batch insert API is present.
83 kes Correct incorrect mempool call causing Director crash. Occurs on
84 systems without va_copy().
85 sb Update spec files for 2.2.1 release
87 kes Fix memory pool call in ua_output.c. bug #934.
88 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
89 Add test program to fnmatch.c
91 kes Integrate patch to README.vc8 from
92 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
93 edit it to get it into Unix patch format.
94 kes Implement mkpath.c to replace old FSF makepath.c
96 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
100 kes Update POTFILES.in
101 kes Cleanup a few underquoted AC_DEFUNs in configure
102 kes Apply patch from Martin Simmons that adds a test for va_copy to
105 kes Fix bug #921 by increasing the number of tries to create a new volume
107 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
108 can be called multiple times. Implement a version for machines
109 without va_copy() that gets a big buffer.
111 kes Integrate more portable zone offset code into bsmtp.c
112 Submitted by Attila Fülöp.
114 kes Fix bad SD->FD return status reported by
115 (James Harper) <james.harper@bendigoit.com.au>
116 ebl Fix a bug in read_close_session which return random status
117 thanks to James Harper
119 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
120 and directory names during restore of single file/directories.
121 kes Add sanity checks to .sql command when string is empty. Hopefully
122 that will resolve Dirks Director crash.
124 kes Apply patch submitted by Martin Simmons that corrects a seg fault
125 in the bsmtp chat subroutine when debug is >= 10.
127 kes Fix Director crash when running bat SQL queries.
128 kes Add David's notes on Item 8: Copy pools.
130 kes Rework projects file to be current and ready for a vote.
131 kes Enhance lex scanner error message.
133 kes Tweak LICENSE file to mention BSD code.
134 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
135 if specified on the ./configure.
136 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
137 This class is intended to allow us to open a second bsock to the
138 Director while in the restore subdialog.
140 kes Fix configure to create bat Makefile before creating dependencies.
141 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
142 kes Add a tooltip to the tray monitor.
143 dvl Set the Director's PID file before dropping privs. This fixes
146 kes Update AUTHORs file
147 kes Increase the default max concurrent jobs to 20 in FD and SD to
148 correspond with the default .conf files.
149 kes Rewrite the Win32 service routines. This eliminates the 3 copies
150 some different, of the same file created by RN when porting the
152 kes Rearrange some of the Win32 directories and the placement of the files
154 kes Set DEVELOPER flag in version.h
156 ========================================================================
157 Release Version 2.2.0
159 kes Apply a second doc patch from Marc.
160 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
161 improves the tips section that discusses how to setup multiple
164 kes Update bat README file.
165 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
166 corrects a typo in the Recycle status check in db_find_next_volume().
167 This will probably fix a number of annoying problems with multiple
169 kes Modify most of dird/msgchan.c to use bsock class calls rather than
170 bnet calls -- no functionality change.
172 kes Modify the Verify output to specify if files are missing on
173 the Volume(s) or disk. Fixes confusion in bug #916.
174 kes When more than one Volume is read in a migration job, the last
175 Volume bytes reported are from the last read volume rather than
176 the last written volume. Fixed. This fixes bug #910.
177 kes Fix display of Recycle flag after update volume=foo recycle=yes.
178 It previously printed New Recyle flag is: no. This fixes bug
181 kes Correct seg fault when switching tape drives during restore.
182 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
183 be used until after 2.2.0 release.
185 kes Remove fnmatch() in SD that permitted wild card specifications.
188 kes Fix %g in filename returned by SQL for browse tree reported by
190 kes Fix configure so that it puts config.out in the cwd rather than
192 kes Attempt to fix the locking problem reported by Eric in bug #906.
193 kes Make berrno class to leave errno unchanged after constructor call.
194 kes Make bnet_server use the heap rather than the stack to allocate
195 its socket fd pointers to avoid a crash at termination. Problem
196 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
198 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
199 and putting it in depkgs-qt along with Qt4.3.
201 kes Rework code in acquire.c that switches drives for reading when
202 the Media Type does not match. This should fix bug #906
204 ebl Fix a director segfault during job setup #907
205 kes Correct seg fault in postgresql when first operation returns no
206 rows. Fixes Dirks File browser problem seg fault with bat.
208 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
209 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
212 kes Implement PopUp YES/NO dialog for bat.
214 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
216 kes Correct RunScript to terminate job in FD on failure.
217 kes Change abort_on_error and AbortJobOnError to fail_on_error
218 and FailJobOnError in RunScripts.
219 kes Minor tweaks of code formating in RunScripts, principally to
220 avoid depassing 80 columns.
222 kes Eliminate one #ifdef Win32 in bsmtp
223 kes Implement grow tool to grow a file for testing very large databases.
224 kes Add big-vol-test to test Bacula seeking with > 5GB.
227 kes Modify find_next_volume() to return all values in Media record.
228 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
232 kes Update Release notes
234 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
235 Warning, in previous beta version, all media get from scratch keep their
238 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
239 This should fix bug #842. Made a note to look at removing the temp
240 files at the end of the install.
241 kes Add ability to mount and unmount a file device providing it is
242 marked as being removable and has the appropriate mount and unmount
243 commands defined in the Device resource. This fixes bug #830.
244 kes When applying a storage override, release all previous storage
245 definitions rather than just prepending the new storage.
246 This should prevent a good deal of confusion.
248 kes Implement ./configure search for qwt libraries.
250 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
251 Win32 FD. This should fix bug #893.
252 kes Remove an unnecessary beep in Win32 init code.
253 kes Update copyright dates in Win32 executable about boxes.
254 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
255 code with a BSD getopt.c and getopt.h.
256 kes Remove sched.h from the Win32 compat directory -- not used.
257 kes Remove the Exit menu item from the Win32 tray monitor. If you really
258 need to shut it down, do it through the services panel or the command
260 kes Remove some inappropriate Bacula FSFE copyrights.
261 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
262 kes Fix regress config non-portable test as pointed out by
263 Florian Heigl <florian.heigl@gmail.com>
264 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
265 as pointed out by Florian Heigl <florian.heigl@gmail.com>
267 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
268 Reported by Frank Sweetser.
272 kes Fix client-only build.
273 kes Integrate client-only fixes for bsys (initgroups) and conio from
274 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
275 kes Make arguments to get_scratch_volume() in same order as other
277 kes Rework the prune_volumes() subroutine so that after purging and
278 no volume found in desired pool, it will check for a scratch
279 volume. This prevents recycling the whole scratch pool.
280 kes Add code to status storage to print boffset_t (largefile support).
282 kes Move qwt (Graphics libarary for Qt4) to depkgs.
283 kes You now need a --with-qwt=<dir> to be able to build bat.
284 kes Update src/win32/cats/bacula_cats.def to include the new
285 db_get_query_dbids() call on Win32.
287 kes Correct a problem when selecting a scratch volume and moving
288 it to another pool that lost some columns.
289 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
290 kes Enhance Autochanger error messages to include Volume and device name.
291 kes Rework prune_volumes() code to take account of InChanger flag,
292 and to handle recycling volumes going to the Scratch pool and
293 current pool because the RecyclePool directive.
294 kes Implement a better and more efficient db_get_query_dbids() to
295 handle creating and passing back a list of DBIds.
299 kes Start work on new more efficient DBId subroutine. First use
300 will be for recycling volume to Scratch inchanger.
301 kes Increase number of JobIds in pruning from 1000 to 10000.
302 This to be replaced by above routine.
303 kes Begin implementation of building Qt4 on Win32.
304 kes Correct typo in fix I added for bad TLS shutdown.
305 kes Pull 2.0.3 patches into patches directory.
306 kes Update Release notes. Include qt-console in line count.
307 kes Update Projects file.
309 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
310 bug in migration code where a job that spanned two volumes
313 kes Implement new BST_DESPOOLING blocked state. Change from locking
314 during despooling in SD to blocking. This means that other threads
315 can work with the device structure, in particular the reservations
316 system while despooling.
318 kes Fix return in reservation message queue that missed clearing
319 the jcr lock (implemented 26Jun07 below).
320 kes Rename a number of dev methods to make locking function names
322 kes Document locking in lock.c. Move lock structures to new file
325 kes Move reservations message lock to lock jcr only this
327 kes Move main SD locking code into lock.c (new file).
328 kes Update Win32 build to include lock.c
332 kes Dirk committed the qwt library code for drawing graphs in bat.
333 kes Tweak install of qwt so that it is integrated with ./configure.
335 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
336 out by Eric (my typo).
337 ebl Fix configure.in to get batch mode enable
338 kes Return correct string from authenticate.cpp in bat when connecting
340 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
341 spurious line drops when using TLS.
342 kes Do not file reparse points when restoring a file that already
345 kes Implement Windows reparse points -- similar to directories, but
346 we do not descend into it. This is a first cut. They seem to
347 be backed up, but restore is not yet tested.
348 kes Remove restore_blocking in tls code when shutting a socket to leave
349 it in blocking mode. Hopefully this will fix the encryption bug
350 reported by Frank Sweetser.
351 kes When opening a file for backup, tell the OS that we are going to
352 read it sequentially -- optimization.
353 kes Change variable names in authenticate_director() to not conflict
354 with member names in bat. Caused great confusion with compiler,
357 kes Queue openssl error messages in case of comm problem.
358 kes Do shutdown() call if socket terminated.
359 kes Remove some duplicated code in tls.c
360 kes Move more of the bsock member variables into private and access
362 kes Add Frank Sweetser's tls-test to the regression suite.
364 kes Add Swedish sv.po file
366 kes Don't print clock skew message in FD if less than 3 seconds diff.
367 kes Add a bit of VSS info to status client.
368 kes Implement a first cut of Vista VSS, using Win2003 code.
372 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
373 loaded tape but uses first drive).
374 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
375 This was indeed a Win32 issue.
377 kes Simplify search of autochanger for in-use Volume.
378 kes Fix exit condition of check for in-use volume. kes Remove
379 inappropriate my_postgresql_free_result() in db_close()
381 kes Fix bad return in FD when encryption signature not found.
382 Probably caused a crash.
383 kes Inhibit missing encryption signature error messages for
384 file types where no signature computed.
385 kes Correct inverted check on autochanger in reservation system.
386 kes Tweak debug code in autochanger reservation.
388 kes Add some additional locking in the cats directory in subroutines
389 that modify packet variables called from batch insert.
390 kes Rework how dcrs are allocated. new_dcr() can now be called
391 with an existing pointer, and it will simply clean it up.
392 This allows the reservation system to test various different
393 devices, and will permit easy device changes.
394 kes A bunch of changes all over to handle new new_dcr() calling
396 kes Work more on the Volume management in the SD. Remember Volumes
397 for tape drives and for autochangers (even virtual disk changers).
398 kes When looking at the Volume list to reserve a drive, handle
399 autochanger names correctly by interating through the changer
400 devices. Also call the Director to see if a Volume is suitable
402 kes Fix some bugs in bscan. Make sure all media records are written.
403 Make sure that valid JobMedia records are written for disk files.
404 Previously they were completely wrong.
405 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
406 that the URLs don't change and so that the developers will all
407 work off the same copy. Rebuild from scrach.
408 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
412 kes Fix seg fault in FD from incorrect digest size.
413 kes Fix argument to non-OpenSSL crypto.c subroutine.
417 kes Remove a few malloc()s from the encryption code.
418 kes Use the class calls to bsock in filed/backup.c and restore.c in
419 place of the old bnet_xxx code.
420 kes Implement code that does an on the fly calculation of the
421 signing digest during restore of encrypted files. It makes
422 a best guess at the algorithm, and if it is not correct, will
423 then revert to the old code which reads the file after it is
425 kes Implement at least one missing crypto stream in stream_to_ascii()
426 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
427 #877 where a reload with bad syntax causes Dir to exit.
429 Cut: 2.1.14 beta (not released)
431 kes Do not free a volume on a tape drive until another volume is
432 mounted and read, or the autochanger unloads the volume.
433 This should help the SD re-use volumes that are already mounted,
434 and should fix bug #886.
435 kes Apply patch from user brettedgar that allows gnome2-console include
436 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
437 kes Apply patch from Lucien Weller that fixes day of week calculation
438 because of DST flag problem. Fixes bug #887.
440 kes Move find_next_appendable_volume() to after acquiring a valid device
441 in reserve.c. This fixes bug #864 -- confirmed by reporter.
443 kes Unable to reproduce bug 872. However added additional testing for
445 kes Bug #874 resolved by documenting SQLite limitations.
446 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
447 kes Bug #881 resolved by removing typo in mtx-changer script.
448 kes Made Frank Sweetser's wiki the official Bacula wiki with his
449 approval. Added a link to the wiki on the web page, and implemented
450 a backup from http://paramount.ind.wpi.edu
452 kes Fix update allfrompool to pass pool name.
454 kes Convert to pure GPL v2 license.
455 kes Fix sscanf problems reported by Peter Buschman that caused
456 a bus error on Solaris.
457 kes Rework (simplify) the select prompt in bat.
458 kes Move get_jobid_from_tid() into lib and create a
460 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
461 should definitely fix the problem of lost error messages in the
463 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
464 kes Eliminate tcpd.h from the project. Enclose the #include from the
465 library with extern C ...
466 kes Add print of signal name when a signal is trapped.
470 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
472 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
473 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
474 makes SQLit3 run 30 times faster, though a bit less safe.
475 kes Implement --with-batch-insert in configure and detection of thread
476 safe libraries. It is on by default, but turned off if no thread
477 safe library (e.g. SQLite 2) is available.
479 kes Fix Bacula PostgreSQL buffer overruns.
480 kes Do better checking for NULL results returned from PostgreSQL;
481 implement retry for failed queries; clear results buffer after
482 failed query. Hopefully this will correct the PostgreSQL failures.
484 kes Implement algorithm to handle only one appendable volume with
485 Prefer Mounted Volumes = no.
486 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
487 returned from a query.
488 kes Make volume lock recursive.
489 kes Implement an additional volume reservation algorithm that
490 starts by considering all reserved volumes then uses the
491 old brute force algorithm of searching the resources to
492 find a suitable device.
493 kes Add new reservations debug code and refine the old code.
494 kes Update the win32/dll/bacula.defs file.
496 kes Tweak reservations algorithm to permit a few more cases, i.e.
497 volume reserved, but on different drive, ...
498 kes Enhance SD status to include Pool and Media Type for drive in a
499 more readable format (a bit longer).
500 kes Fix PostgreSQL double free.
502 kes Minor refactoring of restore decryption code.
503 kes Add code to smartall.c to detect double free of a buffer.
505 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
506 so that bsmtp will create a correct email address (mailbox only).
507 kes Modify 'memory' command so that the buffers are listed as 'In use'
508 to avoid confusion with Orphaned buffers.
509 kes I reworked the OpenSSL include/lib flags to be handled in
510 the standard Bacula way, which should fix bug #863 concerning
511 non-standard OpenSSL libraries.
513 kes Implement Help Browser window for bat.
514 kes Fix reload bug that reset StorageId to zero.
516 kes Fix TLS #ifdefing when TLS turned off.
517 kes Ensure that when labelling a tape with Slot=0 that InChanger
519 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
521 kes Add StartTime to final uar_sel_jobid_temp query so that we can
522 add DISTINCT (required by PostgreSQL).
523 kes Implement BSOCK authenticate_director() method. Eventually will
524 authenicate all daemons.
525 kes Move several more functions into the BSOCK class.
527 kes Add code to tell the OS that we no longer need a cached
528 file that we were reading. In findlib/bfile.c. Also,
529 only cache files that we are reading. Thanks to
530 Tobias Oetiker <tobi@oetiker.ch> for the idea.
531 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
532 kes Implement script to automatically generate cats and dll .def
534 kes Update README.mingw32 to include new .def file generation.
535 kes Correct typo in UTF-8 error message as reported by:
536 jhernandez <julianhernandez@gmail.com>
537 kes Add additional sm_check() code on debug level 1.
538 kes Set default debug level to 1.
539 kes Trap SIGABRT in attempt to get traceback.
541 kes Reduce bat connect timeout from 30 to 15 seconds.
542 kes More restructuring and implementing BSOCK class in place of
544 kes Remove a few unnecessary malloc() tests in crypto code.
545 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
546 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
547 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
549 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
551 kes Fix Verify InitCatalog. The attributes were not pointing to the
552 correct saved location.
553 kes Implement message callback so that GUI is sure to get all
554 daemon messages. Currently displayed in a dialog in bat.
555 kes Ignore SIGUSR2 (Bacula timer) in bat.
556 kes Apply regress patch from bug #859 to allow regress to work
557 with Solaris compiler.
559 kes Begin adding TLS support to bat.
560 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
561 clean up lex.c and make it more readable.
563 kes Move more bnet functions into the BSOCK class.
564 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
565 kes Complete change of berrno strerror() method to bstrerror()
569 kes Cleanup incorrect email addresses in bsmtp.
570 kes Make bat display initial messages rather than discard them.
572 kes First cut of adding .mod to the run command.
573 kes Implement auto display of messages in bat.
574 kes Enhanced preferences to allow all Bacula output to be
577 kes Try to make bsmtp date routines more generic.
578 kes Fixed bug #856 autochanger documentation.
579 kes Rework bsmtp date editing for Win32. This fixes bug #854.
580 kes Add new cats entry point so Win32 builds.
582 kes Attempt to fix bsmtp date editing on OSes without %z editing.
584 kes Do better checking for the MySQL 64 bit libraries looking for both
585 .a and .so libraries.
586 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
587 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
588 kes Require the thread safe version of MySQL during configure. Thanks
589 to Andre Noll for pointing this out.
590 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
591 continuing in migration code.
592 kes Apply implementation of tray-monitor font derived from gnome-console
593 submitted by Andreas Piesk <a.piesk@gmx.net>
595 kes Eliminate important memory loss in SQLite
596 kes Fixed the batch insert MySQL thread specific data that was not
597 being freed. See cats/mysql.c:db_thread_cleanup().
598 kes Fix restore before command.
599 kes Convert old hdr.name to name() in a few places.
600 kes Implement update jobid command.
601 kes Return all time_t dates in db_get_job_record()
602 kes Stop watchdog in SD earlier.
603 kes Put Pool just after Storage in please mount message.
604 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
607 kes Update the po files.
608 kes Fix Verify InitCatalog by making it cache attributes.
610 kes Change name bacula-bat to bat for man 1 page to correspond to
612 kes Check for client and store NULL pointers in status command. This
614 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
615 kes Fix sign extended editing of %p.
616 kes Clean out a little old #ifdefing in cats/mysql.c
618 kes If time diff between DIR and FD is more than 600 seconds convert
619 INFO message to WARNING.
620 kes Implement heap size display in status for all daemons.
621 kes Attempt to fix MySQL db open memory loss (not successfull).
622 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
623 kes Eliminate memory loss in MySQL (possibly other SQLs) during
624 Query. This looks like a MySQL but but by doing extra releases,
625 the memory goes away. This should fix bug #847.
627 kes When backup fails, cancel SD before waiting for sd termination.
628 kes If SD is waiting for FD to connect during cancel, wake up the
630 kes Fix fsf code so that errno is correctly reported.
631 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
633 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
634 so that Bacula doesn't later stumble into a seg fault.
635 kes Use the term Restore Client in the restore Job report.
636 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
637 the original job's FileSetId.
638 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
639 spooling in migration jobs. Not yet tested.
640 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
641 reading conf file from a pipe. However, do it with open_bpipe()
642 rather than popen. Not yet tested.
644 kes Fix an ugly bug where the VolCatBytes were getting updated
646 kes Implement bconsole memory command that prints current memory
647 usage, plus smartalloc dump.
648 kes Clarify some error messages in backup, admin, and migrate.
649 kes Shrink label dialog to smaller size.
650 kes Invert Cancel OK buttons on restore to be OK Cancel.
651 kes More strerror() to bstrerror() conversions.
653 kes Start implementing bstrerror() in place of strerror().
654 kes Stripping path -- seems to work.
656 kes Prevent door and port files from being restored (mostly
658 kes Free an unreleased buffer in compat code.
659 kes Change console Job name from *Console* to -Console- to eliminate
660 Win32 filename problems. Put Win32 path separator when creating
661 Console file. This fixes bug #846.
662 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
664 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
666 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
667 to force Win32 error message.
669 kes First cut strip path. The data should be passed to the FD,
670 but nothing is done with it yet.
671 kes Enhance the digest and signature routines in the crypto
672 library to accept a JCR and to use it to print error messages
673 so that they will go in the Job report rather than the daemon's
675 kes Simplify some of the verify signature code.
676 kes Simplify a few of the alternative returns in the signature
679 ebl Use only POSIX regex instead of GNU regex in breg.c for
680 File relocation. It fix broken freebsd compilation.
681 kes Convert all other Dir files to use new ua class message
683 kes Tentative fix for missing digest signature in bug 807.
684 kes Correct handle problem in new win32_ftruncate routine.
685 kes Convert ua_purge.c and ua_update.c to use new ua class
686 message routines for bat.
688 kes Correct incorrect installation of LICENSE in Win32 installer.
689 kes Display LICENSE at the beginning of the Win32 install.
690 kes Attempt to correct the need for the png files to be installed
692 kes Reapply my bat.conf install script in qt-console. I think I
693 editted bat.pro instead of bat.pro.in and it was lost.
694 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
695 the /var/lock/subsys for subsysdir. Also corrects typos in the
698 kes First cut update job.
699 kes Correct configure to include qmake of src/qt-console directory.
701 kes Make restore job yes/mod/no print in one command so GUI works.
702 kes First cut implementing backup and restore client.
703 kes Correct editing in Verify output that caused a seg fault.
705 kes Insure that bat.conf is not overwritten during installation.
706 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
707 while I was implementing migration in March 2006 !
709 ebl Cleanup file relocation, using char *RegexWhere instead of
710 char *where + bool where_use_regexp
711 kes Update some manpages and add bat manpage.
712 kes Make a first cut at converting bacula.spec.in for bwx-console
714 kes Apply patch from John Goerzen to add hostname as fourth argument
715 to make_catalog_backup script.
716 kes Fix typos I introduced into bsmtp.c
717 kes Make pm_strxxx() routines handle input of NULL pointer. This
718 is to protect from NULL pointers returned from SQL databases.
719 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
720 kes Add more debug to FIFO code -- fix fifo regression test.
722 kes Implement posix_fadvise in FD, and for reading spool files in SD.
723 kes Add thread timer to bnet_connect() to break from OS if wait time
726 kes Update Win32 build to include new files, new symbols, and
728 kes Implement socket level heartbeat (tcp_keepidle)
729 ebl Commit File relocation patch
730 kes Make bat have 'make install' target.
731 kes Warn during install if old gnome-console binary found.
732 kes Warn during install if old wx-console binary found.
733 kes Add -8 option to bsmtp command line to add content type utf-8.
734 Fixes bug #809. (Character coding problem in bsmtp).
735 kes If < is found in target (from, to, cc) then do not enclose the
736 target in < > in bsmtp. Fixes bug #772 (malformed address).
737 kes When printing certain items in dbcheck, stop after 300000.
738 Fixes bug #822. (dbcheck loops).
739 kes Incorrect status in Dir after waiting for mount with poll set.
742 kes Extend idea of Prefer Mounted Volumes to mean a volume about
744 kes Print waiting to reserve a device every 5 mins.
746 kes Don't call close_part in label.c if tape and relabel.
747 kes Don't free volume if busy in close() -- should help with
749 ebl Fix #824 RunScript bug (After script could be execute twice)
750 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
751 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
752 Add a regression script to test RunScript
754 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
757 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
758 deprecated. No additional bugs will be fixed, and they will be dropped
759 in a future release (probably 2.4.0).
760 kes Change name of wx-console to bwx-console to make it more Bacula
762 kes Change the name of gnome-console to bgnome-console to make it
765 kes Some time in March, a Feature Request with patch from Jorj Bauer
766 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
768 The ability for the director to validate a Client (FD) CN against
769 an arbitrary set of patterns rather than the hostname, with
770 A new 'TLS Allowed CN' set of directives which are implemented
771 in the Client resource. Then pattern matching is used in place
772 of hostname matching against the Certificate's CN. As an example, we
773 have certificates which (a) use a local CA, and (b) have a CN of the
775 kes Add new/changed entry points to Win32 build
776 kes Create unaccepted-projects for projects that are not accepted.
777 kes Simplify locking in the reservations system.
778 kes Add more debug code in reservations.
779 kes Make sure error condition on reserving a volume is handled correctly.
780 kes Correct handling of volume_in_use.
781 kes Correct handling of initializing a device.
782 kes Move handling of broadcasting releasing a device into release_device().
783 kes Correct attaching dcr to dev so that it is only done if device
784 is properly initiated.
786 kes Locking debug level tweaks in SD.
787 kes Tweak new Volume code.
789 kes Add exec external-command [wait-seconds] to bconsole. This
790 executes the external-command. Note! normally external-command
791 should be enclosed in double quotes.
792 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
793 it should normally be off in a production system.
795 kes Implement die command for SD so that we can force it to dump.
796 kes Implement SD lock debug code.
797 kes Implement new algorithm for keeping Volume list in SD. It
798 is now owned by the device.
800 kes Implement new code for freeing in use volumes that should
801 resolve if not all, some of the problems of multiple drive
802 tape conflicts described in bug 801.
804 kes Fix gui/bacula-web/images files in svn.
805 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
807 ebl Fix a bug in batch mode (in string escape)
808 kes Correct migration prune SQL typo that crept in in a
811 kes Move bnet_despool() into class in bsock.c
812 kes Modify job report to include director name and Build OS.
813 kes Move drop root privilege and check_catalog() before fork.
814 kes Add update database scripts (version 9 to 10) to updatedb directory.
816 ebl Check size and age of each file after its backup to see if
817 it has changed during backup, if 'checkfilechanges' is set.
818 The FD will do an extra check (stat(2)) after
819 each file backup. mtime, ctime and size are compared with
820 'before backup' information. If time or size mismatch, an
821 error message will be generated. You must upgrade FD to use it.
823 kes Make database name and user configurable
824 --with-db-name=xxx --with-db-user=xxx
825 kes Add back database type to message.c for debugging.
827 kes Implement dir_sql() which issues an SQL query.
828 kes Modify bat medialist to use dir_sql() and do some minor C++
829 formatting as well as eliminating a number of pointers, simplifing
832 kes Fix some of the mtx-changer grep commands for tape label readers.
833 kes Convert a number of bsendmsg into the appropriate send/warning/error
835 kes Suppress the using database message in the .sql command.
836 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
838 kes Add context menu for floating a window.
839 kes Some minor cleanup and name changes in qt-console
840 kes Add doing mt setblk 0 in Win32 mtx-changer.
841 kes Apply Martin's bug fix to move definition of ENODATA for
843 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
846 kes More pruning cleanup.
847 kes Turn on wait_for_drive by default in mtx-changer.
848 kes Turn on Batch insert code by default as it now passes regression.
849 kes Add ./configure --enable-bat to enable building of Bat.
850 No install yet though.
852 kes Implement a new .sql command for bat.
853 kes Implement code to turn off pruning in obtaining the next volume.
854 Pruning is turned off for the status dir command, but turned on
855 for SD requests and for the list nextvolume command.
857 kes Correct Qmsg() that was not updated correctly when committing a
858 previous change (probably the recent TLS patch).
860 kes Write new subroutine is_volume_purged() that explicitly checks
861 if the Volume is purged, and if so marks it as such. This should
862 resolve problems reported about needing to mount twice to recycle
864 kes Rewrite pruning algorithm to do more work in the SQL engine, and
865 to pass a list of JobIds to be deleted to SQL. Also, minimize the
866 amount of duplicated code.
867 kes Do volume pruning only for the Media Type desired (reduces pruning time
868 if multiple Media Types are in the same pool).
869 kes Implement more detailed info in the Job report for the Bacula version
871 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
873 ebl Add bbatch tool to bench database and insert mode.
874 Fix sql quote stuff in batch mode
875 Fix sql stuff for mysql
877 kes Correct problems with am/pm scheduling. Fixes bug #808.
878 kes Implement new prunning code that prunes up to 1000 jobs at
879 the same time. The same technique can be applied to a number
880 of other prune/purge subroutines.
881 kes Add an insanity check when starting a new tape job to ensure
882 that the tape position has not been changed. If so fail the
884 kes Fix Win32 build for dlls to add the folllowing:
885 src/lib/bsock.c -- new file with new entry points
886 src/lib/dlist.c -- new entry points
887 src/cats/sql_create.c -- new entry point
888 src/cats/sql_cmds.c -- new DATA item exported
890 ebl batch mode cleanup bscan-test is ok now.
891 kes Implement SD code to check length of disk volume before appending.
893 kes Correct return status on db_batch... routines.
894 kes Add call to db_write_batch_file_records() to migration code.
895 ebl Fix AfterJob timing
896 kes Move the checking of the database in initializion of the Director
897 to after we drop privileges. This avoids the need for both root
898 and bacula access to the DB.
899 kes Correct a misplaced variable definition in src/filed/backup.c
900 kes Correct how the new batch insert db_create_attributes_record()
901 uses the arguments. Caused a seg fault in bscan.
902 kes Implement lock() and unlock() methods in DEVICE class.
903 Implement block() and set_block(xx) methods in DEVICE class.
904 kes Modify bnet_connect() so that it uses time() to check for the
905 wait time expiring (on some OSes, some system calls may not
907 kes Modify Verify to obtain the previous JobId when it is actually
908 running rather than at schedule time (as it was in 1.38.x).
909 kes Fix src/job.c to handle MaxWaitTime correctly. This should
911 kes When checking pid in pid file, continue running if the pid is
912 the same as ours. This occurs on IRIX after a system crash.
915 kes Extend new GUI API.
916 kes Make the ua structure a class, and implement send_msg(),
917 error_msg(), warning_msg(), and info_msg().
919 kes Apply fix from for building wx-console on the Mac from
921 kes Implement new select mechanism for GUI programs.
922 kes Reorganize initialization of stackedWidgets in bat.
924 kes Add updated nagios plugin supplied by Christian Masopust.
926 kes More bat implementation.
927 kes File migrate bug with Pool Occupancy using mediaid instead
928 of jobids. Fixes bug #795.
929 kes Fix orphaned buffers in filed backup and verify due to
930 crypto buffers not freed during errors. Fixes bug #789.
931 kes Extend new GUI api code to tree commands.
932 kes Ensure that tree and dot commands check console ACLs.
933 kes Permit marking directory with trailing slash.
934 kes Allow 20 console connections (instead of only 10).
936 kes Add smartctl call to bacula-sd.conf as an example of getting
939 kes Modify jobq.c to let simultaneous restore jobs run. This may
940 cause them to fail if they cannot get a drive.
941 kes Add Client Connect Wait to Storage daemon to permit users to
942 modify the time the SD waits for a FD connection.
944 kes Correct virtual changer check which was backwards. This caused
945 volumes to be unloaded into slots already occupied.
947 kes Apply Command ACL filter to JobId list in restore command.
948 kes Correct typeo in var.c patch.
950 kes Don't let Bacula prune File or Job records for the current Job.
951 kes Fix variable substitution pad + inc bug reported (with patch)
954 kes Correct SQLite log table index as reported by Luca Berra.
956 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
958 kes Begin implementing new comm signals for API.
959 kes Fix a few places in lib/message.c where the open fd may
961 kes Continue implementing lib/bsock.c (real class). Make jcr,
962 who, host, and port private. There are new methods to access
963 them for non-class use. This required touching a number of files.
965 kes Add LANG=C to autoconf/randpass so it works with languages other
966 than English. Fixes bug #788.
968 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
970 You will not be able to generate Include/Exclude list any more.
971 It will be fixed soon.
972 If you want to use this, you can apply
973 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
975 kes Restore of sockets created false error messages because Bacula
976 no longer restores sockets, but the code was still trying to
977 set the attributes on a non-existent file. Reported by a user.
978 ebl finish RecyclePool feature
979 Media will takes Pool.RecyclePool
980 when moving from Scratch to a Pool or when user will do
981 update volume=xxx frompool
982 To use it, add RecyclePool = aPool to your Pool resource
985 RecyclePool = Scratch
989 kes Expand new BSOCK class adding signal() and new BNET signals.
990 kes Begin enhancing the dot commands adding a new API function
991 that returns more information and will make it easier
992 to interface to the Director from a program.
994 kes Make DEVICE fd private. Its new name is m_fd, and can be
995 obtained with dev->fd() outside the class. This is the
996 first of many DEVICE members to be made private.
997 kes Implement Michael Renner's idea on having a virtual disk
998 changer. I made some minor modifications (e.g. I did not
999 implement the Virtual Changer directive, but simply set
1000 the Changer Command to an empty string.
1002 kes Implement a BSOCK send() method that writes the whole record
1003 in a single write() request rather than in two.
1004 ebl add update volume=xxx recyclepool=yyyy
1005 volume takes recyclepool from pool when using update volume=xxx from pool
1007 kes Fix encryption deblocking bug, which caused some restored files
1008 to be truncated. This fixes bug #763.
1009 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1010 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1012 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1013 ebl Use btime_t instead of uint64_t in media patch.
1015 kes Optimize the use of the database a bit in the Status dir command.
1016 Only open it when needed, ensure that if any previous database
1017 was opened, it is closed.
1019 kes Correct VolCatBytes bug from media patch.
1020 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1021 in the case of orphaned records.
1022 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1023 and File records in 300K chunks to be more efficient. This
1024 idea came from Juan Luis Frances (if I remember right).
1025 kes Apply Eric's scratch patch that moves a purged Volume to
1026 the RecyclePool. Question: how is RecyclePool set? what
1027 happens to the ScratchPool?
1028 kes Apply Eric's media patch that collects read/write media
1029 times as well as byte counts. This patch requires a
1030 simultaneous upgrade of the DIR and SD. Note, there
1031 should be some way to turn off timing. I'm not sure
1032 times are in Bacula units.
1033 kes Apply Eric's batch-insert patch.
1035 kes Update projects list.
1037 kes Implement Include/Exclude file lists in FD as dlists using
1038 the new dlistString class. This permits efficiently having
1039 large include/exclude lists and completes project Item 25.
1040 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1041 console is authorized to cancel the job. This fixes bug
1043 kes Modify SD so that the VolCatJobs medium record is updated
1044 at the beginning of a Job rather than the end. This
1045 fixes bug #775 where exceeding MaxVolJobs caused jobs
1047 kes Added a mutex around getting and setting Volume information
1048 so that multiple simultaneous jobs will single thread.
1050 Switch to using Subversion
1051 kes Remove src/pygtk-console/ from configure
1053 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1054 plus the entrypoints.
1055 kes Apply patch supplied that corrects debug print
1056 in canceling jobs for max run time. Supplied as
1057 part of bug #621, which was previously fixed.
1059 kes Test on job_canceled() and sd_msg_thread_done inside
1060 loop starting the message thread to avoid a race condition.
1062 kes Remove rl_catch_signal from console.c as it conflicted
1063 with the header definition. Fixes bug #765.
1064 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1066 kes Clarify some stored/acquire messages to indicate if the
1067 problem is with read or append.
1069 kes Fix memory leak with storage ids in cats/sql_get.c
1070 kes Terminate watchdog earlier to avoid reference to released
1071 memory -- reported by Jason Austin.
1072 kes Move closing the database from jobq.c to the director daemon
1073 termination routine. This fixes memory leaks for shadow jobs
1074 (i.e. migration jobs).
1075 kes Free up the unique jobid chain items in migrate.c. This fixes
1076 a memory leak problem.
1077 kes Convert some ugly looking for statements to use foreach_alist
1078 in findlib/find.c. This will facilitate converting the structures
1079 to use dlist (for large include/exclude lists).
1080 kes Fix a bug in the btree.c and btree.h routines, then rename them
1081 rblist and add them to be built in src/lib. Include some new
1082 methods written by Rudolf Cejka that make the code more readable
1083 (hides some of the ugly casting).
1084 kes Add set_next() and set_prev() methods which make the code much more
1085 readable. Also add a new dlistString class that facilitates storing
1086 strings in dlists. To be used in the large include/exclude lists.
1087 kes Make some trivial modifications to lib/tree.h that use rblist
1088 rather than dlist for storing the tree links. This was suggested
1089 by Rudolf Cejka. The result of this is that the restore tree now
1090 uses red-black binary trees rather than simple linked lists. This
1091 should give rather dramatic speed improvements for directories
1092 contining large numbers of directories/files (more than 10000).
1094 kes Fix maxruntime bug #621.
1096 ebl Implement the include JobID in spool file name project.
1097 kes Reorder projects file in order determined by Jan 2007 vote.
1098 kes Implement item #12 on project list -- quick release of FD by
1100 kes Fix open of SQLite3 db where user does not have write permission
1101 so that DIR does not crash. Fixes bug #761.
1103 kes Add back missing @ in Win32 Makefile.
1104 kes Change 'Device not configured to autolabel' from INFO
1106 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1107 which should restart an indefinite # of times.
1108 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1109 other DIR specifications.
1111 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1112 Fix path quoting in SQLite scripts.
1113 Fix problems with SHGetFolderPath.
1115 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1117 kes Fix Job restart on error bug that promotes an Inc to a Full
1118 backup. This should fix bug #755.
1119 kes Add qt-console and first cut of code.
1123 kes Fix Bacula->Documentation link on Win32 to point to index.html
1124 instead of bacula.html. Fixed bug #750.
1125 kes Return JobId in db_get_job_record() when JobId==0. This should
1127 kes Do not release source pointers when restarting a failed job.
1129 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1130 This *should* fix bug #747.
1131 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1134 kes Modify USTORE constructor to set an empty store_source string,
1135 and don't copy the store_source string in a cancel. Hopefully
1136 this will fix Arno's seg fault, bug #744.
1137 kes Add back code to disable conio in configure. Fixes bug #743.
1138 kes Correct the Options scanner in the FD to correctly handle
1139 SHA1 option, which was eating the next option. Reported by
1141 kes Add code to indicate when the SD is spooling, spool wait, and
1142 despooling as requested by Alan Brown.
1144 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob