1 Technical notes on version 2.3
5 kes Fix bacula_cats.def for new db_escape_string().
6 kes Increase size of name string when FD making connection to SD.
9 kes Add code to help Dan debug 2drive-incremental-2disk test.
10 kes Add code to try to fix bug #908.
11 kes Add waits to multiple exit detection code to try to force pid
12 file to always be deleted.
13 kes Restore good dev.tar.gz to rescue set appropriate binary property.
15 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
16 trying to switch drives by checking for blocking before unblocking.
18 kes Cancel storage daemon in all cases where FD reports error. This
19 should fix virtually all cases of bug #920.
20 kes Fix db_escape_string() for MySQL which did not compile.
22 kes Fix error message that was clobbered when Dir tells SD it does not
23 have write permission on Volume. This should fix a minor point
24 in bug #942, but not the main problem.
25 kes Add code to cancel job in SD if FD connection fails. This should
27 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
28 dvl Pass jcr and db into db_escape_string() to enable better escaping
30 kes Fix migration code to get correct Volume name with multiple volumes
31 by skipping |. Fixes bug #936.
32 kes Implement patch supplied by Landon to fix bug #944 where using
33 TLS with bconsole uses 99+% of the CPU.
34 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
36 kes Move patches into patches directory.
38 ebl Fix bug #946 about "bacula-dir -t" which doesn't works
41 ebl Using "m" in bconsole will show messages like before,
43 kes Fix bug #935, and probably also bug #903 where files were not
44 restored. MediaId was not properly set in JobMedia record after
47 kes Suppress chown and chmod error messages if the FD is not running
50 kes Apply Martin Simmons' patch that should turn off the new API usage
51 when batch insert is turned off allowing building on older
53 kes Add ./configure search in qwt-qt4 for qwt package
55 kes Bacula is now free of 3rd party GPL copyrighted code!
57 kes Add guid_to_name.c/h which replace idcache.
58 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
60 ebl Detect if new PosgreSQL batch insert API is present.
61 kes Correct incorrect mempool call causing Director crash. Occurs on
62 systems without va_copy().
63 sb Update spec files for 2.2.1 release
65 kes Fix memory pool call in ua_output.c. bug #934.
66 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
67 Add test program to fnmatch.c
69 kes Integrate patch to README.vc8 from
70 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
71 edit it to get it into Unix patch format.
72 kes Implement mkpath.c to replace old FSF makepath.c
74 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
78 kes Update POTFILES.in
79 kes Cleanup a few underquoted AC_DEFUNs in configure
80 kes Apply patch from Martin Simmons that adds a test for va_copy to
83 kes Fix bug #921 by increasing the number of tries to create a new volume
85 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
86 can be called multiple times. Implement a version for machines
87 without va_copy() that gets a big buffer.
89 kes Integrate more portable zone offset code into bsmtp.c
90 Submitted by Attila Fülöp.
92 kes Fix bad SD->FD return status reported by
93 (James Harper) <james.harper@bendigoit.com.au>
94 ebl Fix a bug in read_close_session which return random status
95 thanks to James Harper
97 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
98 and directory names during restore of single file/directories.
99 kes Add sanity checks to .sql command when string is empty. Hopefully
100 that will resolve Dirks Director crash.
102 kes Apply patch submitted by Martin Simmons that corrects a seg fault
103 in the bsmtp chat subroutine when debug is >= 10.
105 kes Fix Director crash when running bat SQL queries.
106 kes Add David's notes on Item 8: Copy pools.
108 kes Rework projects file to be current and ready for a vote.
109 kes Enhance lex scanner error message.
111 kes Tweak LICENSE file to mention BSD code.
112 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
113 if specified on the ./configure.
114 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
115 This class is intended to allow us to open a second bsock to the
116 Director while in the restore subdialog.
118 kes Fix configure to create bat Makefile before creating dependencies.
119 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
120 kes Add a tooltip to the tray monitor.
121 dvl Set the Director's PID file before dropping privs. This fixes
124 kes Update AUTHORs file
125 kes Increase the default max concurrent jobs to 20 in FD and SD to
126 correspond with the default .conf files.
127 kes Rewrite the Win32 service routines. This eliminates the 3 copies
128 some different, of the same file created by RN when porting the
130 kes Rearrange some of the Win32 directories and the placement of the files
132 kes Set DEVELOPER flag in version.h
134 ========================================================================
135 Release Version 2.2.0
137 kes Apply a second doc patch from Marc.
138 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
139 improves the tips section that discusses how to setup multiple
142 kes Update bat README file.
143 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
144 corrects a typo in the Recycle status check in db_find_next_volume().
145 This will probably fix a number of annoying problems with multiple
147 kes Modify most of dird/msgchan.c to use bsock class calls rather than
148 bnet calls -- no functionality change.
150 kes Modify the Verify output to specify if files are missing on
151 the Volume(s) or disk. Fixes confusion in bug #916.
152 kes When more than one Volume is read in a migration job, the last
153 Volume bytes reported are from the last read volume rather than
154 the last written volume. Fixed. This fixes bug #910.
155 kes Fix display of Recycle flag after update volume=foo recycle=yes.
156 It previously printed New Recyle flag is: no. This fixes bug
159 kes Correct seg fault when switching tape drives during restore.
160 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
161 be used until after 2.2.0 release.
163 kes Remove fnmatch() in SD that permitted wild card specifications.
166 kes Fix %g in filename returned by SQL for browse tree reported by
168 kes Fix configure so that it puts config.out in the cwd rather than
170 kes Attempt to fix the locking problem reported by Eric in bug #906.
171 kes Make berrno class to leave errno unchanged after constructor call.
172 kes Make bnet_server use the heap rather than the stack to allocate
173 its socket fd pointers to avoid a crash at termination. Problem
174 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
176 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
177 and putting it in depkgs-qt along with Qt4.3.
179 kes Rework code in acquire.c that switches drives for reading when
180 the Media Type does not match. This should fix bug #906
182 ebl Fix a director segfault during job setup #907
183 kes Correct seg fault in postgresql when first operation returns no
184 rows. Fixes Dirks File browser problem seg fault with bat.
186 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
187 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
190 kes Implement PopUp YES/NO dialog for bat.
192 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
194 kes Correct RunScript to terminate job in FD on failure.
195 kes Change abort_on_error and AbortJobOnError to fail_on_error
196 and FailJobOnError in RunScripts.
197 kes Minor tweaks of code formating in RunScripts, principally to
198 avoid depassing 80 columns.
200 kes Eliminate one #ifdef Win32 in bsmtp
201 kes Implement grow tool to grow a file for testing very large databases.
202 kes Add big-vol-test to test Bacula seeking with > 5GB.
205 kes Modify find_next_volume() to return all values in Media record.
206 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
210 kes Update Release notes
212 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
213 Warning, in previous beta version, all media get from scratch keep their
216 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
217 This should fix bug #842. Made a note to look at removing the temp
218 files at the end of the install.
219 kes Add ability to mount and unmount a file device providing it is
220 marked as being removable and has the appropriate mount and unmount
221 commands defined in the Device resource. This fixes bug #830.
222 kes When applying a storage override, release all previous storage
223 definitions rather than just prepending the new storage.
224 This should prevent a good deal of confusion.
226 kes Implement ./configure search for qwt libraries.
228 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
229 Win32 FD. This should fix bug #893.
230 kes Remove an unnecessary beep in Win32 init code.
231 kes Update copyright dates in Win32 executable about boxes.
232 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
233 code with a BSD getopt.c and getopt.h.
234 kes Remove sched.h from the Win32 compat directory -- not used.
235 kes Remove the Exit menu item from the Win32 tray monitor. If you really
236 need to shut it down, do it through the services panel or the command
238 kes Remove some inappropriate Bacula FSFE copyrights.
239 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
240 kes Fix regress config non-portable test as pointed out by
241 Florian Heigl <florian.heigl@gmail.com>
242 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
243 as pointed out by Florian Heigl <florian.heigl@gmail.com>
245 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
246 Reported by Frank Sweetser.
250 kes Fix client-only build.
251 kes Integrate client-only fixes for bsys (initgroups) and conio from
252 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
253 kes Make arguments to get_scratch_volume() in same order as other
255 kes Rework the prune_volumes() subroutine so that after purging and
256 no volume found in desired pool, it will check for a scratch
257 volume. This prevents recycling the whole scratch pool.
258 kes Add code to status storage to print boffset_t (largefile support).
260 kes Move qwt (Graphics libarary for Qt4) to depkgs.
261 kes You now need a --with-qwt=<dir> to be able to build bat.
262 kes Update src/win32/cats/bacula_cats.def to include the new
263 db_get_query_dbids() call on Win32.
265 kes Correct a problem when selecting a scratch volume and moving
266 it to another pool that lost some columns.
267 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
268 kes Enhance Autochanger error messages to include Volume and device name.
269 kes Rework prune_volumes() code to take account of InChanger flag,
270 and to handle recycling volumes going to the Scratch pool and
271 current pool because the RecyclePool directive.
272 kes Implement a better and more efficient db_get_query_dbids() to
273 handle creating and passing back a list of DBIds.
277 kes Start work on new more efficient DBId subroutine. First use
278 will be for recycling volume to Scratch inchanger.
279 kes Increase number of JobIds in pruning from 1000 to 10000.
280 This to be replaced by above routine.
281 kes Begin implementation of building Qt4 on Win32.
282 kes Correct typo in fix I added for bad TLS shutdown.
283 kes Pull 2.0.3 patches into patches directory.
284 kes Update Release notes. Include qt-console in line count.
285 kes Update Projects file.
287 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
288 bug in migration code where a job that spanned two volumes
291 kes Implement new BST_DESPOOLING blocked state. Change from locking
292 during despooling in SD to blocking. This means that other threads
293 can work with the device structure, in particular the reservations
294 system while despooling.
296 kes Fix return in reservation message queue that missed clearing
297 the jcr lock (implemented 26Jun07 below).
298 kes Rename a number of dev methods to make locking function names
300 kes Document locking in lock.c. Move lock structures to new file
303 kes Move reservations message lock to lock jcr only this
305 kes Move main SD locking code into lock.c (new file).
306 kes Update Win32 build to include lock.c
310 kes Dirk committed the qwt library code for drawing graphs in bat.
311 kes Tweak install of qwt so that it is integrated with ./configure.
313 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
314 out by Eric (my typo).
315 ebl Fix configure.in to get batch mode enable
316 kes Return correct string from authenticate.cpp in bat when connecting
318 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
319 spurious line drops when using TLS.
320 kes Do not file reparse points when restoring a file that already
323 kes Implement Windows reparse points -- similar to directories, but
324 we do not descend into it. This is a first cut. They seem to
325 be backed up, but restore is not yet tested.
326 kes Remove restore_blocking in tls code when shutting a socket to leave
327 it in blocking mode. Hopefully this will fix the encryption bug
328 reported by Frank Sweetser.
329 kes When opening a file for backup, tell the OS that we are going to
330 read it sequentially -- optimization.
331 kes Change variable names in authenticate_director() to not conflict
332 with member names in bat. Caused great confusion with compiler,
335 kes Queue openssl error messages in case of comm problem.
336 kes Do shutdown() call if socket terminated.
337 kes Remove some duplicated code in tls.c
338 kes Move more of the bsock member variables into private and access
340 kes Add Frank Sweetser's tls-test to the regression suite.
342 kes Add Swedish sv.po file
344 kes Don't print clock skew message in FD if less than 3 seconds diff.
345 kes Add a bit of VSS info to status client.
346 kes Implement a first cut of Vista VSS, using Win2003 code.
350 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
351 loaded tape but uses first drive).
352 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
353 This was indeed a Win32 issue.
355 kes Simplify search of autochanger for in-use Volume.
356 kes Fix exit condition of check for in-use volume. kes Remove
357 inappropriate my_postgresql_free_result() in db_close()
359 kes Fix bad return in FD when encryption signature not found.
360 Probably caused a crash.
361 kes Inhibit missing encryption signature error messages for
362 file types where no signature computed.
363 kes Correct inverted check on autochanger in reservation system.
364 kes Tweak debug code in autochanger reservation.
366 kes Add some additional locking in the cats directory in subroutines
367 that modify packet variables called from batch insert.
368 kes Rework how dcrs are allocated. new_dcr() can now be called
369 with an existing pointer, and it will simply clean it up.
370 This allows the reservation system to test various different
371 devices, and will permit easy device changes.
372 kes A bunch of changes all over to handle new new_dcr() calling
374 kes Work more on the Volume management in the SD. Remember Volumes
375 for tape drives and for autochangers (even virtual disk changers).
376 kes When looking at the Volume list to reserve a drive, handle
377 autochanger names correctly by interating through the changer
378 devices. Also call the Director to see if a Volume is suitable
380 kes Fix some bugs in bscan. Make sure all media records are written.
381 Make sure that valid JobMedia records are written for disk files.
382 Previously they were completely wrong.
383 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
384 that the URLs don't change and so that the developers will all
385 work off the same copy. Rebuild from scrach.
386 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
390 kes Fix seg fault in FD from incorrect digest size.
391 kes Fix argument to non-OpenSSL crypto.c subroutine.
395 kes Remove a few malloc()s from the encryption code.
396 kes Use the class calls to bsock in filed/backup.c and restore.c in
397 place of the old bnet_xxx code.
398 kes Implement code that does an on the fly calculation of the
399 signing digest during restore of encrypted files. It makes
400 a best guess at the algorithm, and if it is not correct, will
401 then revert to the old code which reads the file after it is
403 kes Implement at least one missing crypto stream in stream_to_ascii()
404 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
405 #877 where a reload with bad syntax causes Dir to exit.
407 Cut: 2.1.14 beta (not released)
409 kes Do not free a volume on a tape drive until another volume is
410 mounted and read, or the autochanger unloads the volume.
411 This should help the SD re-use volumes that are already mounted,
412 and should fix bug #886.
413 kes Apply patch from user brettedgar that allows gnome2-console include
414 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
415 kes Apply patch from Lucien Weller that fixes day of week calculation
416 because of DST flag problem. Fixes bug #887.
418 kes Move find_next_appendable_volume() to after acquiring a valid device
419 in reserve.c. This fixes bug #864 -- confirmed by reporter.
421 kes Unable to reproduce bug 872. However added additional testing for
423 kes Bug #874 resolved by documenting SQLite limitations.
424 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
425 kes Bug #881 resolved by removing typo in mtx-changer script.
426 kes Made Frank Sweetser's wiki the official Bacula wiki with his
427 approval. Added a link to the wiki on the web page, and implemented
428 a backup from http://paramount.ind.wpi.edu
430 kes Fix update allfrompool to pass pool name.
432 kes Convert to pure GPL v2 license.
433 kes Fix sscanf problems reported by Peter Buschman that caused
434 a bus error on Solaris.
435 kes Rework (simplify) the select prompt in bat.
436 kes Move get_jobid_from_tid() into lib and create a
438 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
439 should definitely fix the problem of lost error messages in the
441 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
442 kes Eliminate tcpd.h from the project. Enclose the #include from the
443 library with extern C ...
444 kes Add print of signal name when a signal is trapped.
448 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
450 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
451 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
452 makes SQLit3 run 30 times faster, though a bit less safe.
453 kes Implement --with-batch-insert in configure and detection of thread
454 safe libraries. It is on by default, but turned off if no thread
455 safe library (e.g. SQLite 2) is available.
457 kes Fix Bacula PostgreSQL buffer overruns.
458 kes Do better checking for NULL results returned from PostgreSQL;
459 implement retry for failed queries; clear results buffer after
460 failed query. Hopefully this will correct the PostgreSQL failures.
462 kes Implement algorithm to handle only one appendable volume with
463 Prefer Mounted Volumes = no.
464 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
465 returned from a query.
466 kes Make volume lock recursive.
467 kes Implement an additional volume reservation algorithm that
468 starts by considering all reserved volumes then uses the
469 old brute force algorithm of searching the resources to
470 find a suitable device.
471 kes Add new reservations debug code and refine the old code.
472 kes Update the win32/dll/bacula.defs file.
474 kes Tweak reservations algorithm to permit a few more cases, i.e.
475 volume reserved, but on different drive, ...
476 kes Enhance SD status to include Pool and Media Type for drive in a
477 more readable format (a bit longer).
478 kes Fix PostgreSQL double free.
480 kes Minor refactoring of restore decryption code.
481 kes Add code to smartall.c to detect double free of a buffer.
483 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
484 so that bsmtp will create a correct email address (mailbox only).
485 kes Modify 'memory' command so that the buffers are listed as 'In use'
486 to avoid confusion with Orphaned buffers.
487 kes I reworked the OpenSSL include/lib flags to be handled in
488 the standard Bacula way, which should fix bug #863 concerning
489 non-standard OpenSSL libraries.
491 kes Implement Help Browser window for bat.
492 kes Fix reload bug that reset StorageId to zero.
494 kes Fix TLS #ifdefing when TLS turned off.
495 kes Ensure that when labelling a tape with Slot=0 that InChanger
497 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
499 kes Add StartTime to final uar_sel_jobid_temp query so that we can
500 add DISTINCT (required by PostgreSQL).
501 kes Implement BSOCK authenticate_director() method. Eventually will
502 authenicate all daemons.
503 kes Move several more functions into the BSOCK class.
505 kes Add code to tell the OS that we no longer need a cached
506 file that we were reading. In findlib/bfile.c. Also,
507 only cache files that we are reading. Thanks to
508 Tobias Oetiker <tobi@oetiker.ch> for the idea.
509 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
510 kes Implement script to automatically generate cats and dll .def
512 kes Update README.mingw32 to include new .def file generation.
513 kes Correct typo in UTF-8 error message as reported by:
514 jhernandez <julianhernandez@gmail.com>
515 kes Add additional sm_check() code on debug level 1.
516 kes Set default debug level to 1.
517 kes Trap SIGABRT in attempt to get traceback.
519 kes Reduce bat connect timeout from 30 to 15 seconds.
520 kes More restructuring and implementing BSOCK class in place of
522 kes Remove a few unnecessary malloc() tests in crypto code.
523 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
524 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
525 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
527 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
529 kes Fix Verify InitCatalog. The attributes were not pointing to the
530 correct saved location.
531 kes Implement message callback so that GUI is sure to get all
532 daemon messages. Currently displayed in a dialog in bat.
533 kes Ignore SIGUSR2 (Bacula timer) in bat.
534 kes Apply regress patch from bug #859 to allow regress to work
535 with Solaris compiler.
537 kes Begin adding TLS support to bat.
538 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
539 clean up lex.c and make it more readable.
541 kes Move more bnet functions into the BSOCK class.
542 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
543 kes Complete change of berrno strerror() method to bstrerror()
547 kes Cleanup incorrect email addresses in bsmtp.
548 kes Make bat display initial messages rather than discard them.
550 kes First cut of adding .mod to the run command.
551 kes Implement auto display of messages in bat.
552 kes Enhanced preferences to allow all Bacula output to be
555 kes Try to make bsmtp date routines more generic.
556 kes Fixed bug #856 autochanger documentation.
557 kes Rework bsmtp date editing for Win32. This fixes bug #854.
558 kes Add new cats entry point so Win32 builds.
560 kes Attempt to fix bsmtp date editing on OSes without %z editing.
562 kes Do better checking for the MySQL 64 bit libraries looking for both
563 .a and .so libraries.
564 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
565 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
566 kes Require the thread safe version of MySQL during configure. Thanks
567 to Andre Noll for pointing this out.
568 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
569 continuing in migration code.
570 kes Apply implementation of tray-monitor font derived from gnome-console
571 submitted by Andreas Piesk <a.piesk@gmx.net>
573 kes Eliminate important memory loss in SQLite
574 kes Fixed the batch insert MySQL thread specific data that was not
575 being freed. See cats/mysql.c:db_thread_cleanup().
576 kes Fix restore before command.
577 kes Convert old hdr.name to name() in a few places.
578 kes Implement update jobid command.
579 kes Return all time_t dates in db_get_job_record()
580 kes Stop watchdog in SD earlier.
581 kes Put Pool just after Storage in please mount message.
582 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
585 kes Update the po files.
586 kes Fix Verify InitCatalog by making it cache attributes.
588 kes Change name bacula-bat to bat for man 1 page to correspond to
590 kes Check for client and store NULL pointers in status command. This
592 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
593 kes Fix sign extended editing of %p.
594 kes Clean out a little old #ifdefing in cats/mysql.c
596 kes If time diff between DIR and FD is more than 600 seconds convert
597 INFO message to WARNING.
598 kes Implement heap size display in status for all daemons.
599 kes Attempt to fix MySQL db open memory loss (not successfull).
600 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
601 kes Eliminate memory loss in MySQL (possibly other SQLs) during
602 Query. This looks like a MySQL but but by doing extra releases,
603 the memory goes away. This should fix bug #847.
605 kes When backup fails, cancel SD before waiting for sd termination.
606 kes If SD is waiting for FD to connect during cancel, wake up the
608 kes Fix fsf code so that errno is correctly reported.
609 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
611 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
612 so that Bacula doesn't later stumble into a seg fault.
613 kes Use the term Restore Client in the restore Job report.
614 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
615 the original job's FileSetId.
616 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
617 spooling in migration jobs. Not yet tested.
618 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
619 reading conf file from a pipe. However, do it with open_bpipe()
620 rather than popen. Not yet tested.
622 kes Fix an ugly bug where the VolCatBytes were getting updated
624 kes Implement bconsole memory command that prints current memory
625 usage, plus smartalloc dump.
626 kes Clarify some error messages in backup, admin, and migrate.
627 kes Shrink label dialog to smaller size.
628 kes Invert Cancel OK buttons on restore to be OK Cancel.
629 kes More strerror() to bstrerror() conversions.
631 kes Start implementing bstrerror() in place of strerror().
632 kes Stripping path -- seems to work.
634 kes Prevent door and port files from being restored (mostly
636 kes Free an unreleased buffer in compat code.
637 kes Change console Job name from *Console* to -Console- to eliminate
638 Win32 filename problems. Put Win32 path separator when creating
639 Console file. This fixes bug #846.
640 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
642 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
644 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
645 to force Win32 error message.
647 kes First cut strip path. The data should be passed to the FD,
648 but nothing is done with it yet.
649 kes Enhance the digest and signature routines in the crypto
650 library to accept a JCR and to use it to print error messages
651 so that they will go in the Job report rather than the daemon's
653 kes Simplify some of the verify signature code.
654 kes Simplify a few of the alternative returns in the signature
657 ebl Use only POSIX regex instead of GNU regex in breg.c for
658 File relocation. It fix broken freebsd compilation.
659 kes Convert all other Dir files to use new ua class message
661 kes Tentative fix for missing digest signature in bug 807.
662 kes Correct handle problem in new win32_ftruncate routine.
663 kes Convert ua_purge.c and ua_update.c to use new ua class
664 message routines for bat.
666 kes Correct incorrect installation of LICENSE in Win32 installer.
667 kes Display LICENSE at the beginning of the Win32 install.
668 kes Attempt to correct the need for the png files to be installed
670 kes Reapply my bat.conf install script in qt-console. I think I
671 editted bat.pro instead of bat.pro.in and it was lost.
672 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
673 the /var/lock/subsys for subsysdir. Also corrects typos in the
676 kes First cut update job.
677 kes Correct configure to include qmake of src/qt-console directory.
679 kes Make restore job yes/mod/no print in one command so GUI works.
680 kes First cut implementing backup and restore client.
681 kes Correct editing in Verify output that caused a seg fault.
683 kes Insure that bat.conf is not overwritten during installation.
684 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
685 while I was implementing migration in March 2006 !
687 ebl Cleanup file relocation, using char *RegexWhere instead of
688 char *where + bool where_use_regexp
689 kes Update some manpages and add bat manpage.
690 kes Make a first cut at converting bacula.spec.in for bwx-console
692 kes Apply patch from John Goerzen to add hostname as fourth argument
693 to make_catalog_backup script.
694 kes Fix typos I introduced into bsmtp.c
695 kes Make pm_strxxx() routines handle input of NULL pointer. This
696 is to protect from NULL pointers returned from SQL databases.
697 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
698 kes Add more debug to FIFO code -- fix fifo regression test.
700 kes Implement posix_fadvise in FD, and for reading spool files in SD.
701 kes Add thread timer to bnet_connect() to break from OS if wait time
704 kes Update Win32 build to include new files, new symbols, and
706 kes Implement socket level heartbeat (tcp_keepidle)
707 ebl Commit File relocation patch
708 kes Make bat have 'make install' target.
709 kes Warn during install if old gnome-console binary found.
710 kes Warn during install if old wx-console binary found.
711 kes Add -8 option to bsmtp command line to add content type utf-8.
712 Fixes bug #809. (Character coding problem in bsmtp).
713 kes If < is found in target (from, to, cc) then do not enclose the
714 target in < > in bsmtp. Fixes bug #772 (malformed address).
715 kes When printing certain items in dbcheck, stop after 300000.
716 Fixes bug #822. (dbcheck loops).
717 kes Incorrect status in Dir after waiting for mount with poll set.
720 kes Extend idea of Prefer Mounted Volumes to mean a volume about
722 kes Print waiting to reserve a device every 5 mins.
724 kes Don't call close_part in label.c if tape and relabel.
725 kes Don't free volume if busy in close() -- should help with
727 ebl Fix #824 RunScript bug (After script could be execute twice)
728 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
729 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
730 Add a regression script to test RunScript
732 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
735 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
736 deprecated. No additional bugs will be fixed, and they will be dropped
737 in a future release (probably 2.4.0).
738 kes Change name of wx-console to bwx-console to make it more Bacula
740 kes Change the name of gnome-console to bgnome-console to make it
743 kes Some time in March, a Feature Request with patch from Jorj Bauer
744 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
746 The ability for the director to validate a Client (FD) CN against
747 an arbitrary set of patterns rather than the hostname, with
748 A new 'TLS Allowed CN' set of directives which are implemented
749 in the Client resource. Then pattern matching is used in place
750 of hostname matching against the Certificate's CN. As an example, we
751 have certificates which (a) use a local CA, and (b) have a CN of the
753 kes Add new/changed entry points to Win32 build
754 kes Create unaccepted-projects for projects that are not accepted.
755 kes Simplify locking in the reservations system.
756 kes Add more debug code in reservations.
757 kes Make sure error condition on reserving a volume is handled correctly.
758 kes Correct handling of volume_in_use.
759 kes Correct handling of initializing a device.
760 kes Move handling of broadcasting releasing a device into release_device().
761 kes Correct attaching dcr to dev so that it is only done if device
762 is properly initiated.
764 kes Locking debug level tweaks in SD.
765 kes Tweak new Volume code.
767 kes Add exec external-command [wait-seconds] to bconsole. This
768 executes the external-command. Note! normally external-command
769 should be enclosed in double quotes.
770 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
771 it should normally be off in a production system.
773 kes Implement die command for SD so that we can force it to dump.
774 kes Implement SD lock debug code.
775 kes Implement new algorithm for keeping Volume list in SD. It
776 is now owned by the device.
778 kes Implement new code for freeing in use volumes that should
779 resolve if not all, some of the problems of multiple drive
780 tape conflicts described in bug 801.
782 kes Fix gui/bacula-web/images files in svn.
783 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
785 ebl Fix a bug in batch mode (in string escape)
786 kes Correct migration prune SQL typo that crept in in a
789 kes Move bnet_despool() into class in bsock.c
790 kes Modify job report to include director name and Build OS.
791 kes Move drop root privilege and check_catalog() before fork.
792 kes Add update database scripts (version 9 to 10) to updatedb directory.
794 ebl Check size and age of each file after its backup to see if
795 it has changed during backup, if 'checkfilechanges' is set.
796 The FD will do an extra check (stat(2)) after
797 each file backup. mtime, ctime and size are compared with
798 'before backup' information. If time or size mismatch, an
799 error message will be generated. You must upgrade FD to use it.
801 kes Make database name and user configurable
802 --with-db-name=xxx --with-db-user=xxx
803 kes Add back database type to message.c for debugging.
805 kes Implement dir_sql() which issues an SQL query.
806 kes Modify bat medialist to use dir_sql() and do some minor C++
807 formatting as well as eliminating a number of pointers, simplifing
810 kes Fix some of the mtx-changer grep commands for tape label readers.
811 kes Convert a number of bsendmsg into the appropriate send/warning/error
813 kes Suppress the using database message in the .sql command.
814 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
816 kes Add context menu for floating a window.
817 kes Some minor cleanup and name changes in qt-console
818 kes Add doing mt setblk 0 in Win32 mtx-changer.
819 kes Apply Martin's bug fix to move definition of ENODATA for
821 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
824 kes More pruning cleanup.
825 kes Turn on wait_for_drive by default in mtx-changer.
826 kes Turn on Batch insert code by default as it now passes regression.
827 kes Add ./configure --enable-bat to enable building of Bat.
828 No install yet though.
830 kes Implement a new .sql command for bat.
831 kes Implement code to turn off pruning in obtaining the next volume.
832 Pruning is turned off for the status dir command, but turned on
833 for SD requests and for the list nextvolume command.
835 kes Correct Qmsg() that was not updated correctly when committing a
836 previous change (probably the recent TLS patch).
838 kes Write new subroutine is_volume_purged() that explicitly checks
839 if the Volume is purged, and if so marks it as such. This should
840 resolve problems reported about needing to mount twice to recycle
842 kes Rewrite pruning algorithm to do more work in the SQL engine, and
843 to pass a list of JobIds to be deleted to SQL. Also, minimize the
844 amount of duplicated code.
845 kes Do volume pruning only for the Media Type desired (reduces pruning time
846 if multiple Media Types are in the same pool).
847 kes Implement more detailed info in the Job report for the Bacula version
849 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
851 ebl Add bbatch tool to bench database and insert mode.
852 Fix sql quote stuff in batch mode
853 Fix sql stuff for mysql
855 kes Correct problems with am/pm scheduling. Fixes bug #808.
856 kes Implement new prunning code that prunes up to 1000 jobs at
857 the same time. The same technique can be applied to a number
858 of other prune/purge subroutines.
859 kes Add an insanity check when starting a new tape job to ensure
860 that the tape position has not been changed. If so fail the
862 kes Fix Win32 build for dlls to add the folllowing:
863 src/lib/bsock.c -- new file with new entry points
864 src/lib/dlist.c -- new entry points
865 src/cats/sql_create.c -- new entry point
866 src/cats/sql_cmds.c -- new DATA item exported
868 ebl batch mode cleanup bscan-test is ok now.
869 kes Implement SD code to check length of disk volume before appending.
871 kes Correct return status on db_batch... routines.
872 kes Add call to db_write_batch_file_records() to migration code.
873 ebl Fix AfterJob timing
874 kes Move the checking of the database in initializion of the Director
875 to after we drop privileges. This avoids the need for both root
876 and bacula access to the DB.
877 kes Correct a misplaced variable definition in src/filed/backup.c
878 kes Correct how the new batch insert db_create_attributes_record()
879 uses the arguments. Caused a seg fault in bscan.
880 kes Implement lock() and unlock() methods in DEVICE class.
881 Implement block() and set_block(xx) methods in DEVICE class.
882 kes Modify bnet_connect() so that it uses time() to check for the
883 wait time expiring (on some OSes, some system calls may not
885 kes Modify Verify to obtain the previous JobId when it is actually
886 running rather than at schedule time (as it was in 1.38.x).
887 kes Fix src/job.c to handle MaxWaitTime correctly. This should
889 kes When checking pid in pid file, continue running if the pid is
890 the same as ours. This occurs on IRIX after a system crash.
893 kes Extend new GUI API.
894 kes Make the ua structure a class, and implement send_msg(),
895 error_msg(), warning_msg(), and info_msg().
897 kes Apply fix from for building wx-console on the Mac from
899 kes Implement new select mechanism for GUI programs.
900 kes Reorganize initialization of stackedWidgets in bat.
902 kes Add updated nagios plugin supplied by Christian Masopust.
904 kes More bat implementation.
905 kes File migrate bug with Pool Occupancy using mediaid instead
906 of jobids. Fixes bug #795.
907 kes Fix orphaned buffers in filed backup and verify due to
908 crypto buffers not freed during errors. Fixes bug #789.
909 kes Extend new GUI api code to tree commands.
910 kes Ensure that tree and dot commands check console ACLs.
911 kes Permit marking directory with trailing slash.
912 kes Allow 20 console connections (instead of only 10).
914 kes Add smartctl call to bacula-sd.conf as an example of getting
917 kes Modify jobq.c to let simultaneous restore jobs run. This may
918 cause them to fail if they cannot get a drive.
919 kes Add Client Connect Wait to Storage daemon to permit users to
920 modify the time the SD waits for a FD connection.
922 kes Correct virtual changer check which was backwards. This caused
923 volumes to be unloaded into slots already occupied.
925 kes Apply Command ACL filter to JobId list in restore command.
926 kes Correct typeo in var.c patch.
928 kes Don't let Bacula prune File or Job records for the current Job.
929 kes Fix variable substitution pad + inc bug reported (with patch)
932 kes Correct SQLite log table index as reported by Luca Berra.
934 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
936 kes Begin implementing new comm signals for API.
937 kes Fix a few places in lib/message.c where the open fd may
939 kes Continue implementing lib/bsock.c (real class). Make jcr,
940 who, host, and port private. There are new methods to access
941 them for non-class use. This required touching a number of files.
943 kes Add LANG=C to autoconf/randpass so it works with languages other
944 than English. Fixes bug #788.
946 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
948 You will not be able to generate Include/Exclude list any more.
949 It will be fixed soon.
950 If you want to use this, you can apply
951 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
953 kes Restore of sockets created false error messages because Bacula
954 no longer restores sockets, but the code was still trying to
955 set the attributes on a non-existent file. Reported by a user.
956 ebl finish RecyclePool feature
957 Media will takes Pool.RecyclePool
958 when moving from Scratch to a Pool or when user will do
959 update volume=xxx frompool
960 To use it, add RecyclePool = aPool to your Pool resource
963 RecyclePool = Scratch
967 kes Expand new BSOCK class adding signal() and new BNET signals.
968 kes Begin enhancing the dot commands adding a new API function
969 that returns more information and will make it easier
970 to interface to the Director from a program.
972 kes Make DEVICE fd private. Its new name is m_fd, and can be
973 obtained with dev->fd() outside the class. This is the
974 first of many DEVICE members to be made private.
975 kes Implement Michael Renner's idea on having a virtual disk
976 changer. I made some minor modifications (e.g. I did not
977 implement the Virtual Changer directive, but simply set
978 the Changer Command to an empty string.
980 kes Implement a BSOCK send() method that writes the whole record
981 in a single write() request rather than in two.
982 ebl add update volume=xxx recyclepool=yyyy
983 volume takes recyclepool from pool when using update volume=xxx from pool
985 kes Fix encryption deblocking bug, which caused some restored files
986 to be truncated. This fixes bug #763.
987 kes Add FD event sequence order prepared by Eric -- for RunScripts.
988 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
990 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
991 ebl Use btime_t instead of uint64_t in media patch.
993 kes Optimize the use of the database a bit in the Status dir command.
994 Only open it when needed, ensure that if any previous database
995 was opened, it is closed.
997 kes Correct VolCatBytes bug from media patch.
998 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
999 in the case of orphaned records.
1000 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1001 and File records in 300K chunks to be more efficient. This
1002 idea came from Juan Luis Frances (if I remember right).
1003 kes Apply Eric's scratch patch that moves a purged Volume to
1004 the RecyclePool. Question: how is RecyclePool set? what
1005 happens to the ScratchPool?
1006 kes Apply Eric's media patch that collects read/write media
1007 times as well as byte counts. This patch requires a
1008 simultaneous upgrade of the DIR and SD. Note, there
1009 should be some way to turn off timing. I'm not sure
1010 times are in Bacula units.
1011 kes Apply Eric's batch-insert patch.
1013 kes Update projects list.
1015 kes Implement Include/Exclude file lists in FD as dlists using
1016 the new dlistString class. This permits efficiently having
1017 large include/exclude lists and completes project Item 25.
1018 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1019 console is authorized to cancel the job. This fixes bug
1021 kes Modify SD so that the VolCatJobs medium record is updated
1022 at the beginning of a Job rather than the end. This
1023 fixes bug #775 where exceeding MaxVolJobs caused jobs
1025 kes Added a mutex around getting and setting Volume information
1026 so that multiple simultaneous jobs will single thread.
1028 Switch to using Subversion
1029 kes Remove src/pygtk-console/ from configure
1031 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1032 plus the entrypoints.
1033 kes Apply patch supplied that corrects debug print
1034 in canceling jobs for max run time. Supplied as
1035 part of bug #621, which was previously fixed.
1037 kes Test on job_canceled() and sd_msg_thread_done inside
1038 loop starting the message thread to avoid a race condition.
1040 kes Remove rl_catch_signal from console.c as it conflicted
1041 with the header definition. Fixes bug #765.
1042 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1044 kes Clarify some stored/acquire messages to indicate if the
1045 problem is with read or append.
1047 kes Fix memory leak with storage ids in cats/sql_get.c
1048 kes Terminate watchdog earlier to avoid reference to released
1049 memory -- reported by Jason Austin.
1050 kes Move closing the database from jobq.c to the director daemon
1051 termination routine. This fixes memory leaks for shadow jobs
1052 (i.e. migration jobs).
1053 kes Free up the unique jobid chain items in migrate.c. This fixes
1054 a memory leak problem.
1055 kes Convert some ugly looking for statements to use foreach_alist
1056 in findlib/find.c. This will facilitate converting the structures
1057 to use dlist (for large include/exclude lists).
1058 kes Fix a bug in the btree.c and btree.h routines, then rename them
1059 rblist and add them to be built in src/lib. Include some new
1060 methods written by Rudolf Cejka that make the code more readable
1061 (hides some of the ugly casting).
1062 kes Add set_next() and set_prev() methods which make the code much more
1063 readable. Also add a new dlistString class that facilitates storing
1064 strings in dlists. To be used in the large include/exclude lists.
1065 kes Make some trivial modifications to lib/tree.h that use rblist
1066 rather than dlist for storing the tree links. This was suggested
1067 by Rudolf Cejka. The result of this is that the restore tree now
1068 uses red-black binary trees rather than simple linked lists. This
1069 should give rather dramatic speed improvements for directories
1070 contining large numbers of directories/files (more than 10000).
1072 kes Fix maxruntime bug #621.
1074 ebl Implement the include JobID in spool file name project.
1075 kes Reorder projects file in order determined by Jan 2007 vote.
1076 kes Implement item #12 on project list -- quick release of FD by
1078 kes Fix open of SQLite3 db where user does not have write permission
1079 so that DIR does not crash. Fixes bug #761.
1081 kes Add back missing @ in Win32 Makefile.
1082 kes Change 'Device not configured to autolabel' from INFO
1084 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1085 which should restart an indefinite # of times.
1086 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1087 other DIR specifications.
1089 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1090 Fix path quoting in SQLite scripts.
1091 Fix problems with SHGetFolderPath.
1093 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1095 kes Fix Job restart on error bug that promotes an Inc to a Full
1096 backup. This should fix bug #755.
1097 kes Add qt-console and first cut of code.
1101 kes Fix Bacula->Documentation link on Win32 to point to index.html
1102 instead of bacula.html. Fixed bug #750.
1103 kes Return JobId in db_get_job_record() when JobId==0. This should
1105 kes Do not release source pointers when restarting a failed job.
1107 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1108 This *should* fix bug #747.
1109 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1112 kes Modify USTORE constructor to set an empty store_source string,
1113 and don't copy the store_source string in a cancel. Hopefully
1114 this will fix Arno's seg fault, bug #744.
1115 kes Add back code to disable conio in configure. Fixes bug #743.
1116 kes Correct the Options scanner in the FD to correctly handle
1117 SHA1 option, which was eating the next option. Reported by
1119 kes Add code to indicate when the SD is spooling, spool wait, and
1120 despooling as requested by Alan Brown.
1122 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob