1 Technical notes on version 2.3
5 kes First cut of converting FD .status to work with bat API.
7 .status client=XXX header
8 .status client=XXX running
9 .status client=XXX terminated
10 kes Implement first cut of Copy Job.
11 kes Implement Catalog in Pool resource. It overrides catalog specified
12 in the Client resource.
14 kes Apply patch (with some difficulties) from Joao Henrique Freitas
15 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
17 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
18 ftruncate() actually works. In the case of some (cheap) NAS devices,
19 it does not, and so recycling NAS Volumes does not work. The code
20 simply unlink()s the file, then recreates it. This fixes bug #1011.
22 kes First incomplete cut of big malloc blocks for htable.
23 kes Tweak plugin code.
25 kes Plugin debug code + tweak a couple bat dialog layouts
27 kes Apply Max Full Age patch submitted by Scott Bailey
28 <scott dot bailey at eds dot com>
30 kes Fix creating first JobMedia record during Migration to include
31 proper index. This caused slow restores of migrated jobs.
32 kes Temp fix to plugin name file_index.
33 kes Bacula backed up and restored a MySQL database.
35 kes Implement plugin restore.
36 kes Implement parsing of db_driver to give db_type index.
38 kes First cut of plugin restore code.
39 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
40 and do not strip paths on symbolic links.
41 kes Set catalog backup database and user name from values specified on
43 ebl Fix #1031 about wrong pool source information in job report.
46 kes Remove a redundant jcr argument to find_files, match_files, and
48 kes Implement '.status dir header|scheduled|running|terminated' that
49 prints the requested status section. With the exception of the
50 header, the other reports have fields separated by tabs (\t).
52 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
53 a resource embedded run command to find a since time if no explicit
54 since time was supplied on the command line.
55 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
56 that updates the state file at job termination time in addition to
57 when the daemon terminates.
59 kes First version where a plugin did a backup.
60 bpipe-fd.so created a backup file, wrote a test
61 string to it, and Bacua could restore this fabricated file.
63 kes Implement DB Driver = string for the DBI driver.
64 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
65 kes First cut of code for loading Win32 plugin dlls. Implement
66 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
67 and implement a dlfcn.h file based on opengroup's definitions of
70 kes First cut plugin directives.
72 kes Apply patch from bug #1049 to prevent stripping the path on a
74 kes Attempt to fix bug #1047 where stripping a path corrupts the
75 heap. Waiting for feedback.
76 kes Correct the Mount message not to suggest labeling a new tape
77 when doing a restore. Submitted by email by John Stoffel.
78 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
79 FD by using casting. Reported in bug #1042.
81 kes A bit of crypto cleanup. More later.
85 kes Apply patch from Martin to correct bug #1040, bscan sets existing
87 kes Fixed important spelling error in doc -- bug #1045.
89 ebl Fix bextract to be able to extract non-portable Win32 data to
91 kes Move initialization of read/write res lock earlier in the code.
92 This fixes the crash with a null conf file. This fixes bug
94 kes Redefine CURES in lib/parse_conf to be URES and move it all
95 into lib/parse_conf.c -- this responds to bug #1042, but does
96 not fix it. The fix is not to compile with FORTIFY_SOURCE.
97 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
98 the trunk SVN. I don't think this was reported as a bug.
100 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
102 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
104 kes Add DataDespooling and DataCommitting status (committing is
105 the last despooling).
106 kes Finish implementation of new reservations code noted below.
108 kes Fix bsnprintf for float point numbers. I broke recently when
109 parameterizing some variables. This fixes bug #1036.
110 kes Undo recent reservations changes ... will apply them later
111 when they work better.
113 ebl Fixes #1034 which cause mysql to hang the connection after 8h
114 ebl Change default statistics target of filename.name and path.path
115 fields for PostgreSQL. This speeds lookup by indexes. Thanks
117 kes A few more tweaks to new reservation code. Make sure to clear
118 vol released flag when retaking volume. When reading label and
119 label is bad mark volume unused. When recycling, mark volume
120 unused so it can be renamed.
122 kes Fix reserve_volume() so it doesn't release a volume in use
123 (i.e. a volume entry not marked released). This should be
124 the last part needed to fix bug #1018.
126 kes Move Heartbeat documentation from Job to Director resource.
127 This fixes bug #1033.
129 kes Fix existing switch drive SD code to call autochanger to release
130 any old volume. This must be done to keep the autochanger from
131 releasing subsequently newly reserved volumes in doing a close().
132 This should fix bug #1018.
133 kes Fail if attempting to get console input in batch mode. This
134 should help fail RunScript console commands that are incomplete.
135 kes First cut implementing switch_drive() in SD (not actually called).
137 kes Implement first cut running console commands in a RunScript.
139 ebl Fixes bug #1028 where 'Selection Type' option was not usable
141 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
144 Release Version 2.2.7
146 kes Add new free_tls() entry point so that Win32 builds.
147 kes Fix compile warning in src/lib/util.c
148 kes Fix entry point for edit_job_codes() so that Win32 builds.
149 kes Fix seg fault Frank Sweetser reports in regression testing
150 on his systems. The problem was that the original author of
151 bsnprintf.c did not take into account the side effects of
152 using ++x in the argument to a #define.
153 kes Make SD protocol backward compatible with version 2.2.x.
155 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
156 because Bacula no longer restores sockets.
157 ebl Always use ignorecase fileset option on win32 FD.
159 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
160 that implements double quoting include names in conf files,
161 and also allows piping input by having the first character
162 be a vertical bar (|).
163 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
164 that implement %f in RunScripts to pass the FileSet name.
165 kes Skip leading | when lex input comes from a pipe as suggested
166 by Michael Stapelberg <michael@stapelberg.de>.
168 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
169 Nerijus Baliunas <nerijus@users.sourceforge.net>
171 kes Implement Plugin Directory and plugin events.
173 kes Implement a security enhancement: TLS authentication but no
174 encryption. Enabled by setting 'TLS Authentication = yes'.
175 Note when this is on, TLS encryption is turned OFF!
177 kes This patch corrects a problem where the maximum concurrent storage
178 jobs counter gets out of sync during restore jobs causing jobs to
179 'wait on max Storage jobs'. This patch fixes bug #1009.
181 kes This patch fixes bcopy so that it produces correct Volumes.
183 kes This patch eliminates spurious output to the console during a VerifyVolume
184 job that contains encrypted data. It fixes bug #1024.
186 kes This patch prevents the 'status dir' command from trying to use a scratch
187 volume and possibly moving it from one pool to another. This patch fixes
190 kes Add new include to postgresql.c suggested by Marc Cousins so
191 that it compiles correctly with pgre version 8.3.
193 kes Fix --archivedir addition to configure. Replace it with
194 --with-archivedir in configure.in This fixes the regression
196 kes This patch fixes bug #1012 where the job is canceled because
197 of Max Run Time exceeded when the job has not yet started.
199 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
200 one 'part' to write. Instead of each part being stored on disk,
201 written to DVD, then deleted from disk, all parts are written to disk,
202 and only the last is written and deleted from disk.
203 kes This patch fixes the status command to include the formating string for
204 JS_AttrInsterting. It fixes bug #1021.
205 kes This patch should fix the Mac OS X build problem on the latest
206 Darwin, where sys/types.h was not included correctly (apparently
207 due to a change in the Mac headers). The solution was to explicitly
208 ensure that it is defined for the ./configure.
209 This patch also has a rebuild of configure that includes the Debian
210 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
211 kes This patch should ensure that queued messages to the console are
212 displayed as soon as possible. It should fix bug 1007, but has been
213 reported not to work.
215 kes This patch fixes the infinite loop when trying to increase the
216 maximum number of volumes in a Pool during the add command.
217 This patch fixes bug #1008.
219 Release Version 2.2.6
221 db Remove extra data on estimate command in joblist for bat.
223 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
224 really change anything, but is the beginning of doing it *right*.
225 To do it completely right the LastWritten date must be passed to
226 the SD, but it is not yet done.
227 kes Minor tweaks to some bat restore SQL.
228 kes This patch fixes bug #1003 where putting the message output from
229 a Verify job into the catalog results in a recursive loop. The problem
230 seems to show up only with postgresql (to be verified).
231 kes Correct %x to %p in postgresql debug statement.
233 kes Fix bug #942 where lots of emails where generated when the heartbeat
234 interval was low and Bacula wanted a different tape from the one in
237 ebl Add new SD despooling attributes and Dir inserting attributes
238 job status codes in the catalog (Status table).
240 ebl Use qmake-qt4 instead of qmake when available (debian system).
242 kes Add a security warning to src/cats/make_catalog_backup.in indicating
243 that passing the password via the command line (arg 3) is insecure.
244 This responds to bug #990 (it doesn't fix it).
246 kes Set default debug_level to zero. This corrects bugs #991 and #993.
247 kes Fix a crash in bat when it cannot connect to the Director for example
248 if the Director is not running.
249 kes Remove redundant INDEX (JobId) from File table in the trunk.
251 kes Make explicit exception to GPL in LICENSE to permit linking
252 the Win32 FD with Microsoft VSS code.
253 kes Apply the Solaris package patch from
254 Masopust, Christian <christian.masopust@siemens.com>
255 kes Apply the patch to optionally add a timestamp in the debug output
256 submitted by Mariusz Czulada <manieq@wp.eu>.
258 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
259 backend (sql_strerror). Fixes bug #989
261 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
262 It applied with no problems.
263 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
265 kes Redirect stderror to stdin on mt status command in mtx-changer.in
266 since the status is returned on stderr on Solaris.
267 kes Activate Close button on tray-monitor window. This fixes
269 kes Check for NULL item in parse_conf.c before calling it. In the
270 case of Device, there is no item and this caused a seg fault when
271 Device appears in the conf file.
272 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
273 avoids pulling in config.h multiple times in some new code.
275 kes Fix spurious warning message printed when creating a volume with
276 a LabelFormat. This fixes bug #976.
278 Release Version 2.2.5
280 kes Add JobId in place of Job name in all the Jmsg() output.
281 kes Correct the APP_DESC for the Win32 storage service (remove an e).
283 kes Make maxvol-test and new more strict maxvol2-test work.
284 kes Print JobId in all Jmsg() job output.
286 kes Add new SD despooling attributes and Dir inserting attributes
287 job status codes. This fixes bug 961.
288 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
290 kes Fix doc issue. This fixes bug #963.
291 kes Fix listing performance problems in bat. Pointed out by
293 kes Remove old debug code.
294 kes Fix bat code that tests for Win32. This should fix bug #968
295 kes Query 5 list wrong Vol after migration. This fixes bug #960
297 ebl Fix #969 where user can't change Replace option in restore menu.
299 kes Save jcr in thread specific data (tsd) for each thread.
300 kes Make Dmsg() print JobId as -%u.
301 kes Make Jmsg, Emsg, and others automatically pickup the jobid
302 for the thread if it exists.
303 kes Remove old reservation debug jid code.
304 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
305 ebl Add an option that permit to specify spool size in job
306 definition. (Applying patches/testing/spoolsize_per_job.patch).
307 You must upgrade SD and DIR at the same time.
308 dvl Add new configuration item --archivedir
309 dvl Adjust regression tests to use tmp not /tmp. This will allow
310 multiple concurrent runs of the regression tests.
312 kes Fix race condition that drops final block written to volume.
313 This happens in rare cases with multiple simultaneous jobs
314 when the Volume fills. This fixes bug #964. May be related
315 to bug #935 and possibly #903.
316 kes Eliminate more strerror() and replace with bstrerror().
317 kes Remove BSD getopt and replace with unrestricted IBM version.
318 kes Fix Win32 build for changed calling sequences.
319 kes More tweaks to the mount volume routines to get everything
320 right. Changed variable name from find to have_vol, which is
321 much easier to understand.
322 kes Enhance btimer debug code.
324 kes Fix FD->SD authorization failure, which was due to spurious
325 wakeups from a pthread_cond_timedwait(). Simply check the
326 predicate before continuing. This fixes bug #953.
327 kes Add const char where needed (more to do). Remove temp debug code.
329 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
330 kes Don't overwrite error message in check_tables_version.
332 kes Unlock batch insert tables with same calls used elsewhere.
333 kes Allow starting 59 jobs a second.
334 kes Make SD session key more random.
335 kes Add retry for SQLite opening db if it fails. Probably helps
337 kes Suppress extra error messages during batch insert failure.
339 kes Add jcr to timer packets so if killed message can be sent to job.
340 kes Add JobId to all Dmsg() output.
341 kes Put some FD auth code on dbglvl rather than fixed.
342 kes Return insert attributes error message in db msg buffer to avoid
343 false error messages. Helps fix bug #966.
344 kes Separate batch init error messages. Probably helps fix bug #966.
345 kes Make SD code that contructs attribute insert check string lengths
347 kes If Dir gets an error during inserting attributes, cancel SD.
348 This reduces unnecessary error messages.
350 kes Correct search boolean for getting Volume info
351 ebl Cleanup batch insert code. Probably fixes bug #965.
352 kes Back out one small change to the reservation system (reserving a volume).
353 kes Rework how a Volume is mounted. It is now much more intelligent and
354 will always attempt to use any mounted volume if possible and reduces
355 calls to the Director asking about volumes.
357 kes Turn off some code when batch insert not enabled.
358 kes Edit FD name in connect error messages.
359 kes Rework the reservation system to take into account that the Director
360 might give us a Volume that is different from the current one being
361 used, and to ensure that we don't exceed Maximum Volume Jobs.
362 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
363 fatal error with multiple jobs running'
364 kes Add more debug code in reservation system.
365 kes Implement maxvol-test to check bug #947.
367 kes Add code to handle tray monitor separated from Win32 FD.
368 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
370 kes Add missed return in fixing verify bug -- trunk only.
371 ebl Fix a command parser issue causing a director segfault.
372 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
374 kes Increase the max block size to 4MB fixes bug #957.
375 kes ERABT if user sets min block size > max block size. Fixes bug #956.
376 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
377 is not properly mounted (recognized) during a poll.
378 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
379 Job that has differences reports Verify OK.
380 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
382 ebl Add an option to operate on all pools with update vol parameters.
383 This complete the project 20. Patch from Nigel Stepp.
384 ebl Add history support to bconsole when using readline.
385 Using Ctrl-D to exit doesn't update .bconsole_history
386 kes Modify new volume algorithm to use max MediaId for generating next
387 volume number rather than the count of Volumes. This should essentially
388 eliminate the failure rate if some volumes were deleted. Bug #921.
389 kes Begin implemention of Optimize Job Scheduling.
390 kes Implement restore callback that Dirk and I agreed on for bat
391 restore. This fixes bug #928. Restore of backup of zero files fails.
392 kes Fix SQL Catalog logging which broke with new db_escape_string
395 Release Version 2.2.4
397 kes Fix bacula_cats.def for new db_escape_string().
398 kes Increase size of name string when FD making connection to SD.
399 May fix bug #953. FD->SD connection failure.
401 kes Add code to help Dan debug 2drive-incremental-2disk test.
402 kes Add code to try to fix bug #908.
403 kes Add waits to multiple exit detection code to try to force pid
404 file to always be deleted.
405 kes Restore good dev.tar.gz to rescue set appropriate binary property.
407 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
408 trying to switch drives by checking for blocking before unblocking.
410 kes Cancel storage daemon in all cases where FD reports error. This
411 should fix virtually all cases of bug #920.
412 kes Fix db_escape_string() for MySQL which did not compile.
414 kes Fix error message that was clobbered when Dir tells SD it does not
415 have write permission on Volume. This should fix a minor point
416 in bug #942, but not the main problem.
417 kes Add code to cancel job in SD if FD connection fails. This should
419 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
420 dvl Pass jcr and db into db_escape_string() to enable better escaping
422 kes Fix migration code to get correct Volume name with multiple volumes
423 by skipping |. Fixes bug #936.
424 kes Implement patch supplied by Landon to fix bug #944 where using
425 TLS with bconsole uses 99+% of the CPU.
426 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
428 kes Move patches into patches directory.
430 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
433 ebl Using 'm' in bconsole will show messages like before,
434 and not memory usage.
435 kes Fix bug #935, and probably also bug #903 where files were not
436 restored. MediaId was not properly set in JobMedia record after
439 kes Suppress chown and chmod error messages if the FD is not running
442 kes Apply Martin Simmons' patch that should turn off the new API usage
443 when batch insert is turned off allowing building on older
445 kes Add ./configure search in qwt-qt4 for qwt package
447 kes Bacula is now free of 3rd party GPL copyrighted code!
449 kes Add guid_to_name.c/h which replace idcache.
450 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
452 ebl Detect if new PosgreSQL batch insert API is present.
453 kes Correct incorrect mempool call causing Director crash. Occurs on
454 systems without va_copy().
455 sb Update spec files for 2.2.1 release
457 kes Fix memory pool call in ua_output.c. bug #934.
458 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
459 Add test program to fnmatch.c
461 kes Integrate patch to README.vc8 from
462 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
463 edit it to get it into Unix patch format.
464 kes Implement mkpath.c to replace old FSF makepath.c
466 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
468 Release Version 2.2.1
470 kes Update POTFILES.in
471 kes Cleanup a few underquoted AC_DEFUNs in configure
472 kes Apply patch from Martin Simmons that adds a test for va_copy to
475 kes Fix bug #921 by increasing the number of tries to create a new volume
477 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
478 can be called multiple times. Implement a version for machines
479 without va_copy() that gets a big buffer.
481 kes Integrate more portable zone offset code into bsmtp.c
482 Submitted by Attila Fülöp.
484 kes Fix bad SD->FD return status reported by
485 (James Harper) <james.harper@bendigoit.com.au>
486 ebl Fix a bug in read_close_session which return random status
487 thanks to James Harper
489 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
490 and directory names during restore of single file/directories.
491 kes Add sanity checks to .sql command when string is empty. Hopefully
492 that will resolve Dirks Director crash.
494 kes Apply patch submitted by Martin Simmons that corrects a seg fault
495 in the bsmtp chat subroutine when debug is >= 10.
497 kes Fix Director crash when running bat SQL queries.
498 kes Add David's notes on Item 8: Copy pools.
500 kes Rework projects file to be current and ready for a vote.
501 kes Enhance lex scanner error message.
503 kes Tweak LICENSE file to mention BSD code.
504 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
505 if specified on the ./configure.
506 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
507 This class is intended to allow us to open a second bsock to the
508 Director while in the restore subdialog.
510 kes Fix configure to create bat Makefile before creating dependencies.
511 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
512 kes Add a tooltip to the tray monitor.
513 dvl Set the Director's PID file before dropping privs. This fixes
516 kes Update AUTHORs file
517 kes Increase the default max concurrent jobs to 20 in FD and SD to
518 correspond with the default .conf files.
519 kes Rewrite the Win32 service routines. This eliminates the 3 copies
520 some different, of the same file created by RN when porting the
522 kes Rearrange some of the Win32 directories and the placement of the files
524 kes Set DEVELOPER flag in version.h
526 ========================================================================
527 Release Version 2.2.0
529 kes Apply a second doc patch from Marc.
530 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
531 improves the tips section that discusses how to setup multiple
534 kes Update bat README file.
535 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
536 corrects a typo in the Recycle status check in db_find_next_volume().
537 This will probably fix a number of annoying problems with multiple
539 kes Modify most of dird/msgchan.c to use bsock class calls rather than
540 bnet calls -- no functionality change.
542 kes Modify the Verify output to specify if files are missing on
543 the Volume(s) or disk. Fixes confusion in bug #916.
544 kes When more than one Volume is read in a migration job, the last
545 Volume bytes reported are from the last read volume rather than
546 the last written volume. Fixed. This fixes bug #910.
547 kes Fix display of Recycle flag after update volume=foo recycle=yes.
548 It previously printed New Recyle flag is: no. This fixes bug
551 kes Correct seg fault when switching tape drives during restore.
552 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
553 be used until after 2.2.0 release.
555 kes Remove fnmatch() in SD that permitted wild card specifications.
558 kes Fix %g in filename returned by SQL for browse tree reported by
560 kes Fix configure so that it puts config.out in the cwd rather than
562 kes Attempt to fix the locking problem reported by Eric in bug #906.
563 kes Make berrno class to leave errno unchanged after constructor call.
564 kes Make bnet_server use the heap rather than the stack to allocate
565 its socket fd pointers to avoid a crash at termination. Problem
566 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
568 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
569 and putting it in depkgs-qt along with Qt4.3.
571 kes Rework code in acquire.c that switches drives for reading when
572 the Media Type does not match. This should fix bug #906
574 ebl Fix a director segfault during job setup #907
575 kes Correct seg fault in postgresql when first operation returns no
576 rows. Fixes Dirks File browser problem seg fault with bat.
578 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
579 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
582 kes Implement PopUp YES/NO dialog for bat.
584 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
586 kes Correct RunScript to terminate job in FD on failure.
587 kes Change abort_on_error and AbortJobOnError to fail_on_error
588 and FailJobOnError in RunScripts.
589 kes Minor tweaks of code formating in RunScripts, principally to
590 avoid depassing 80 columns.
592 kes Eliminate one #ifdef Win32 in bsmtp
593 kes Implement grow tool to grow a file for testing very large databases.
594 kes Add big-vol-test to test Bacula seeking with > 5GB.
597 kes Modify find_next_volume() to return all values in Media record.
598 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
602 kes Update Release notes
604 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
605 Warning, in previous beta version, all media get from scratch keep their
608 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
609 This should fix bug #842. Made a note to look at removing the temp
610 files at the end of the install.
611 kes Add ability to mount and unmount a file device providing it is
612 marked as being removable and has the appropriate mount and unmount
613 commands defined in the Device resource. This fixes bug #830.
614 kes When applying a storage override, release all previous storage
615 definitions rather than just prepending the new storage.
616 This should prevent a good deal of confusion.
618 kes Implement ./configure search for qwt libraries.
620 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
621 Win32 FD. This should fix bug #893.
622 kes Remove an unnecessary beep in Win32 init code.
623 kes Update copyright dates in Win32 executable about boxes.
624 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
625 code with a BSD getopt.c and getopt.h.
626 kes Remove sched.h from the Win32 compat directory -- not used.
627 kes Remove the Exit menu item from the Win32 tray monitor. If you really
628 need to shut it down, do it through the services panel or the command
630 kes Remove some inappropriate Bacula FSFE copyrights.
631 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
632 kes Fix regress config non-portable test as pointed out by
633 Florian Heigl <florian.heigl@gmail.com>
634 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
635 as pointed out by Florian Heigl <florian.heigl@gmail.com>
637 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
638 Reported by Frank Sweetser.
642 kes Fix client-only build.
643 kes Integrate client-only fixes for bsys (initgroups) and conio from
644 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
645 kes Make arguments to get_scratch_volume() in same order as other
647 kes Rework the prune_volumes() subroutine so that after purging and
648 no volume found in desired pool, it will check for a scratch
649 volume. This prevents recycling the whole scratch pool.
650 kes Add code to status storage to print boffset_t (largefile support).
652 kes Move qwt (Graphics libarary for Qt4) to depkgs.
653 kes You now need a --with-qwt=<dir> to be able to build bat.
654 kes Update src/win32/cats/bacula_cats.def to include the new
655 db_get_query_dbids() call on Win32.
657 kes Correct a problem when selecting a scratch volume and moving
658 it to another pool that lost some columns.
659 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
660 kes Enhance Autochanger error messages to include Volume and device name.
661 kes Rework prune_volumes() code to take account of InChanger flag,
662 and to handle recycling volumes going to the Scratch pool and
663 current pool because the RecyclePool directive.
664 kes Implement a better and more efficient db_get_query_dbids() to
665 handle creating and passing back a list of DBIds.
669 kes Start work on new more efficient DBId subroutine. First use
670 will be for recycling volume to Scratch inchanger.
671 kes Increase number of JobIds in pruning from 1000 to 10000.
672 This to be replaced by above routine.
673 kes Begin implementation of building Qt4 on Win32.
674 kes Correct typo in fix I added for bad TLS shutdown.
675 kes Pull 2.0.3 patches into patches directory.
676 kes Update Release notes. Include qt-console in line count.
677 kes Update Projects file.
679 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
680 bug in migration code where a job that spanned two volumes
683 kes Implement new BST_DESPOOLING blocked state. Change from locking
684 during despooling in SD to blocking. This means that other threads
685 can work with the device structure, in particular the reservations
686 system while despooling.
688 kes Fix return in reservation message queue that missed clearing
689 the jcr lock (implemented 26Jun07 below).
690 kes Rename a number of dev methods to make locking function names
692 kes Document locking in lock.c. Move lock structures to new file
695 kes Move reservations message lock to lock jcr only this
697 kes Move main SD locking code into lock.c (new file).
698 kes Update Win32 build to include lock.c
702 kes Dirk committed the qwt library code for drawing graphs in bat.
703 kes Tweak install of qwt so that it is integrated with ./configure.
705 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
706 out by Eric (my typo).
707 ebl Fix configure.in to get batch mode enable
708 kes Return correct string from authenticate.cpp in bat when connecting
710 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
711 spurious line drops when using TLS.
712 kes Do not file reparse points when restoring a file that already
715 kes Implement Windows reparse points -- similar to directories, but
716 we do not descend into it. This is a first cut. They seem to
717 be backed up, but restore is not yet tested.
718 kes Remove restore_blocking in tls code when shutting a socket to leave
719 it in blocking mode. Hopefully this will fix the encryption bug
720 reported by Frank Sweetser.
721 kes When opening a file for backup, tell the OS that we are going to
722 read it sequentially -- optimization.
723 kes Change variable names in authenticate_director() to not conflict
724 with member names in bat. Caused great confusion with compiler,
727 kes Queue openssl error messages in case of comm problem.
728 kes Do shutdown() call if socket terminated.
729 kes Remove some duplicated code in tls.c
730 kes Move more of the bsock member variables into private and access
732 kes Add Frank Sweetser's tls-test to the regression suite.
734 kes Add Swedish sv.po file
736 kes Don't print clock skew message in FD if less than 3 seconds diff.
737 kes Add a bit of VSS info to status client.
738 kes Implement a first cut of Vista VSS, using Win2003 code.
742 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
743 loaded tape but uses first drive).
744 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
745 This was indeed a Win32 issue.
747 kes Simplify search of autochanger for in-use Volume.
748 kes Fix exit condition of check for in-use volume. kes Remove
749 inappropriate my_postgresql_free_result() in db_close()
751 kes Fix bad return in FD when encryption signature not found.
752 Probably caused a crash.
753 kes Inhibit missing encryption signature error messages for
754 file types where no signature computed.
755 kes Correct inverted check on autochanger in reservation system.
756 kes Tweak debug code in autochanger reservation.
758 kes Add some additional locking in the cats directory in subroutines
759 that modify packet variables called from batch insert.
760 kes Rework how dcrs are allocated. new_dcr() can now be called
761 with an existing pointer, and it will simply clean it up.
762 This allows the reservation system to test various different
763 devices, and will permit easy device changes.
764 kes A bunch of changes all over to handle new new_dcr() calling
766 kes Work more on the Volume management in the SD. Remember Volumes
767 for tape drives and for autochangers (even virtual disk changers).
768 kes When looking at the Volume list to reserve a drive, handle
769 autochanger names correctly by interating through the changer
770 devices. Also call the Director to see if a Volume is suitable
772 kes Fix some bugs in bscan. Make sure all media records are written.
773 Make sure that valid JobMedia records are written for disk files.
774 Previously they were completely wrong.
775 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
776 that the URLs don't change and so that the developers will all
777 work off the same copy. Rebuild from scrach.
778 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
782 kes Fix seg fault in FD from incorrect digest size.
783 kes Fix argument to non-OpenSSL crypto.c subroutine.
787 kes Remove a few malloc()s from the encryption code.
788 kes Use the class calls to bsock in filed/backup.c and restore.c in
789 place of the old bnet_xxx code.
790 kes Implement code that does an on the fly calculation of the
791 signing digest during restore of encrypted files. It makes
792 a best guess at the algorithm, and if it is not correct, will
793 then revert to the old code which reads the file after it is
795 kes Implement at least one missing crypto stream in stream_to_ascii()
796 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
797 #877 where a reload with bad syntax causes Dir to exit.
799 Cut: 2.1.14 beta (not released)
801 kes Do not free a volume on a tape drive until another volume is
802 mounted and read, or the autochanger unloads the volume.
803 This should help the SD re-use volumes that are already mounted,
804 and should fix bug #886.
805 kes Apply patch from user brettedgar that allows gnome2-console include
806 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
807 kes Apply patch from Lucien Weller that fixes day of week calculation
808 because of DST flag problem. Fixes bug #887.
810 kes Move find_next_appendable_volume() to after acquiring a valid device
811 in reserve.c. This fixes bug #864 -- confirmed by reporter.
813 kes Unable to reproduce bug 872. However added additional testing for
815 kes Bug #874 resolved by documenting SQLite limitations.
816 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
817 kes Bug #881 resolved by removing typo in mtx-changer script.
818 kes Made Frank Sweetser's wiki the official Bacula wiki with his
819 approval. Added a link to the wiki on the web page, and implemented
820 a backup from http://paramount.ind.wpi.edu
822 kes Fix update allfrompool to pass pool name.
824 kes Convert to pure GPL v2 license.
825 kes Fix sscanf problems reported by Peter Buschman that caused
826 a bus error on Solaris.
827 kes Rework (simplify) the select prompt in bat.
828 kes Move get_jobid_from_tid() into lib and create a
830 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
831 should definitely fix the problem of lost error messages in the
833 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
834 kes Eliminate tcpd.h from the project. Enclose the #include from the
835 library with extern C ...
836 kes Add print of signal name when a signal is trapped.
840 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
842 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
843 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
844 makes SQLit3 run 30 times faster, though a bit less safe.
845 kes Implement --with-batch-insert in configure and detection of thread
846 safe libraries. It is on by default, but turned off if no thread
847 safe library (e.g. SQLite 2) is available.
849 kes Fix Bacula PostgreSQL buffer overruns.
850 kes Do better checking for NULL results returned from PostgreSQL;
851 implement retry for failed queries; clear results buffer after
852 failed query. Hopefully this will correct the PostgreSQL failures.
854 kes Implement algorithm to handle only one appendable volume with
855 Prefer Mounted Volumes = no.
856 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
857 returned from a query.
858 kes Make volume lock recursive.
859 kes Implement an additional volume reservation algorithm that
860 starts by considering all reserved volumes then uses the
861 old brute force algorithm of searching the resources to
862 find a suitable device.
863 kes Add new reservations debug code and refine the old code.
864 kes Update the win32/dll/bacula.defs file.
866 kes Tweak reservations algorithm to permit a few more cases, i.e.
867 volume reserved, but on different drive, ...
868 kes Enhance SD status to include Pool and Media Type for drive in a
869 more readable format (a bit longer).
870 kes Fix PostgreSQL double free.
872 kes Minor refactoring of restore decryption code.
873 kes Add code to smartall.c to detect double free of a buffer.
875 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
876 so that bsmtp will create a correct email address (mailbox only).
877 kes Modify 'memory' command so that the buffers are listed as 'In use'
878 to avoid confusion with Orphaned buffers.
879 kes I reworked the OpenSSL include/lib flags to be handled in
880 the standard Bacula way, which should fix bug #863 concerning
881 non-standard OpenSSL libraries.
883 kes Implement Help Browser window for bat.
884 kes Fix reload bug that reset StorageId to zero.
886 kes Fix TLS #ifdefing when TLS turned off.
887 kes Ensure that when labelling a tape with Slot=0 that InChanger
889 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
891 kes Add StartTime to final uar_sel_jobid_temp query so that we can
892 add DISTINCT (required by PostgreSQL).
893 kes Implement BSOCK authenticate_director() method. Eventually will
894 authenicate all daemons.
895 kes Move several more functions into the BSOCK class.
897 kes Add code to tell the OS that we no longer need a cached
898 file that we were reading. In findlib/bfile.c. Also,
899 only cache files that we are reading. Thanks to
900 Tobias Oetiker <tobi@oetiker.ch> for the idea.
901 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
902 kes Implement script to automatically generate cats and dll .def
904 kes Update README.mingw32 to include new .def file generation.
905 kes Correct typo in UTF-8 error message as reported by:
906 jhernandez <julianhernandez@gmail.com>
907 kes Add additional sm_check() code on debug level 1.
908 kes Set default debug level to 1.
909 kes Trap SIGABRT in attempt to get traceback.
911 kes Reduce bat connect timeout from 30 to 15 seconds.
912 kes More restructuring and implementing BSOCK class in place of
914 kes Remove a few unnecessary malloc() tests in crypto code.
915 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
916 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
917 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
919 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
921 kes Fix Verify InitCatalog. The attributes were not pointing to the
922 correct saved location.
923 kes Implement message callback so that GUI is sure to get all
924 daemon messages. Currently displayed in a dialog in bat.
925 kes Ignore SIGUSR2 (Bacula timer) in bat.
926 kes Apply regress patch from bug #859 to allow regress to work
927 with Solaris compiler.
929 kes Begin adding TLS support to bat.
930 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
931 clean up lex.c and make it more readable.
933 kes Move more bnet functions into the BSOCK class.
934 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
935 kes Complete change of berrno strerror() method to bstrerror()
939 kes Cleanup incorrect email addresses in bsmtp.
940 kes Make bat display initial messages rather than discard them.
942 kes First cut of adding .mod to the run command.
943 kes Implement auto display of messages in bat.
944 kes Enhanced preferences to allow all Bacula output to be
947 kes Try to make bsmtp date routines more generic.
948 kes Fixed bug #856 autochanger documentation.
949 kes Rework bsmtp date editing for Win32. This fixes bug #854.
950 kes Add new cats entry point so Win32 builds.
952 kes Attempt to fix bsmtp date editing on OSes without %z editing.
954 kes Do better checking for the MySQL 64 bit libraries looking for both
955 .a and .so libraries.
956 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
957 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
958 kes Require the thread safe version of MySQL during configure. Thanks
959 to Andre Noll for pointing this out.
960 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
961 continuing in migration code.
962 kes Apply implementation of tray-monitor font derived from gnome-console
963 submitted by Andreas Piesk <a.piesk@gmx.net>
965 kes Eliminate important memory loss in SQLite
966 kes Fixed the batch insert MySQL thread specific data that was not
967 being freed. See cats/mysql.c:db_thread_cleanup().
968 kes Fix restore before command.
969 kes Convert old hdr.name to name() in a few places.
970 kes Implement update jobid command.
971 kes Return all time_t dates in db_get_job_record()
972 kes Stop watchdog in SD earlier.
973 kes Put Pool just after Storage in please mount message.
974 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
977 kes Update the po files.
978 kes Fix Verify InitCatalog by making it cache attributes.
980 kes Change name bacula-bat to bat for man 1 page to correspond to
982 kes Check for client and store NULL pointers in status command. This
984 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
985 kes Fix sign extended editing of %p.
986 kes Clean out a little old #ifdefing in cats/mysql.c
988 kes If time diff between DIR and FD is more than 600 seconds convert
989 INFO message to WARNING.
990 kes Implement heap size display in status for all daemons.
991 kes Attempt to fix MySQL db open memory loss (not successfull).
992 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
993 kes Eliminate memory loss in MySQL (possibly other SQLs) during
994 Query. This looks like a MySQL but but by doing extra releases,
995 the memory goes away. This should fix bug #847.
997 kes When backup fails, cancel SD before waiting for sd termination.
998 kes If SD is waiting for FD to connect during cancel, wake up the
1000 kes Fix fsf code so that errno is correctly reported.
1001 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1003 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1004 so that Bacula doesn't later stumble into a seg fault.
1005 kes Use the term Restore Client in the restore Job report.
1006 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1007 the original job's FileSetId.
1008 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1009 spooling in migration jobs. Not yet tested.
1010 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1011 reading conf file from a pipe. However, do it with open_bpipe()
1012 rather than popen. Not yet tested.
1014 kes Fix an ugly bug where the VolCatBytes were getting updated
1016 kes Implement bconsole memory command that prints current memory
1017 usage, plus smartalloc dump.
1018 kes Clarify some error messages in backup, admin, and migrate.
1019 kes Shrink label dialog to smaller size.
1020 kes Invert Cancel OK buttons on restore to be OK Cancel.
1021 kes More strerror() to bstrerror() conversions.
1023 kes Start implementing bstrerror() in place of strerror().
1024 kes Stripping path -- seems to work.
1026 kes Prevent door and port files from being restored (mostly
1028 kes Free an unreleased buffer in compat code.
1029 kes Change console Job name from *Console* to -Console- to eliminate
1030 Win32 filename problems. Put Win32 path separator when creating
1031 Console file. This fixes bug #846.
1032 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1034 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1036 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1037 to force Win32 error message.
1039 kes First cut strip path. The data should be passed to the FD,
1040 but nothing is done with it yet.
1041 kes Enhance the digest and signature routines in the crypto
1042 library to accept a JCR and to use it to print error messages
1043 so that they will go in the Job report rather than the daemon's
1045 kes Simplify some of the verify signature code.
1046 kes Simplify a few of the alternative returns in the signature
1049 ebl Use only POSIX regex instead of GNU regex in breg.c for
1050 File relocation. It fix broken freebsd compilation.
1051 kes Convert all other Dir files to use new ua class message
1053 kes Tentative fix for missing digest signature in bug 807.
1054 kes Correct handle problem in new win32_ftruncate routine.
1055 kes Convert ua_purge.c and ua_update.c to use new ua class
1056 message routines for bat.
1058 kes Correct incorrect installation of LICENSE in Win32 installer.
1059 kes Display LICENSE at the beginning of the Win32 install.
1060 kes Attempt to correct the need for the png files to be installed
1062 kes Reapply my bat.conf install script in qt-console. I think I
1063 editted bat.pro instead of bat.pro.in and it was lost.
1064 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1065 the /var/lock/subsys for subsysdir. Also corrects typos in the
1068 kes First cut update job.
1069 kes Correct configure to include qmake of src/qt-console directory.
1071 kes Make restore job yes/mod/no print in one command so GUI works.
1072 kes First cut implementing backup and restore client.
1073 kes Correct editing in Verify output that caused a seg fault.
1075 kes Insure that bat.conf is not overwritten during installation.
1076 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1077 while I was implementing migration in March 2006 !
1079 ebl Cleanup file relocation, using char *RegexWhere instead of
1080 char *where + bool where_use_regexp
1081 kes Update some manpages and add bat manpage.
1082 kes Make a first cut at converting bacula.spec.in for bwx-console
1084 kes Apply patch from John Goerzen to add hostname as fourth argument
1085 to make_catalog_backup script.
1086 kes Fix typos I introduced into bsmtp.c
1087 kes Make pm_strxxx() routines handle input of NULL pointer. This
1088 is to protect from NULL pointers returned from SQL databases.
1089 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1090 kes Add more debug to FIFO code -- fix fifo regression test.
1092 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1093 kes Add thread timer to bnet_connect() to break from OS if wait time
1096 kes Update Win32 build to include new files, new symbols, and
1098 kes Implement socket level heartbeat (tcp_keepidle)
1099 ebl Commit File relocation patch
1100 kes Make bat have 'make install' target.
1101 kes Warn during install if old gnome-console binary found.
1102 kes Warn during install if old wx-console binary found.
1103 kes Add -8 option to bsmtp command line to add content type utf-8.
1104 Fixes bug #809. (Character coding problem in bsmtp).
1105 kes If < is found in target (from, to, cc) then do not enclose the
1106 target in < > in bsmtp. Fixes bug #772 (malformed address).
1107 kes When printing certain items in dbcheck, stop after 300000.
1108 Fixes bug #822. (dbcheck loops).
1109 kes Incorrect status in Dir after waiting for mount with poll set.
1112 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1114 kes Print waiting to reserve a device every 5 mins.
1116 kes Don't call close_part in label.c if tape and relabel.
1117 kes Don't free volume if busy in close() -- should help with
1119 ebl Fix #824 RunScript bug (After script could be execute twice)
1120 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1121 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1122 Add a regression script to test RunScript
1124 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1127 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1128 deprecated. No additional bugs will be fixed, and they will be dropped
1129 in a future release (probably 2.4.0).
1130 kes Change name of wx-console to bwx-console to make it more Bacula
1132 kes Change the name of gnome-console to bgnome-console to make it
1135 kes Some time in March, a Feature Request with patch from Jorj Bauer
1136 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1138 The ability for the director to validate a Client (FD) CN against
1139 an arbitrary set of patterns rather than the hostname, with
1140 A new 'TLS Allowed CN' set of directives which are implemented
1141 in the Client resource. Then pattern matching is used in place
1142 of hostname matching against the Certificate's CN. As an example, we
1143 have certificates which (a) use a local CA, and (b) have a CN of the
1145 kes Add new/changed entry points to Win32 build
1146 kes Create unaccepted-projects for projects that are not accepted.
1147 kes Simplify locking in the reservations system.
1148 kes Add more debug code in reservations.
1149 kes Make sure error condition on reserving a volume is handled correctly.
1150 kes Correct handling of volume_in_use.
1151 kes Correct handling of initializing a device.
1152 kes Move handling of broadcasting releasing a device into release_device().
1153 kes Correct attaching dcr to dev so that it is only done if device
1154 is properly initiated.
1156 kes Locking debug level tweaks in SD.
1157 kes Tweak new Volume code.
1159 kes Add exec external-command [wait-seconds] to bconsole. This
1160 executes the external-command. Note! normally external-command
1161 should be enclosed in double quotes.
1162 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1163 it should normally be off in a production system.
1165 kes Implement die command for SD so that we can force it to dump.
1166 kes Implement SD lock debug code.
1167 kes Implement new algorithm for keeping Volume list in SD. It
1168 is now owned by the device.
1170 kes Implement new code for freeing in use volumes that should
1171 resolve if not all, some of the problems of multiple drive
1172 tape conflicts described in bug 801.
1174 kes Fix gui/bacula-web/images files in svn.
1175 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1177 ebl Fix a bug in batch mode (in string escape)
1178 kes Correct migration prune SQL typo that crept in in a
1179 recent 2.1.x change.
1181 kes Move bnet_despool() into class in bsock.c
1182 kes Modify job report to include director name and Build OS.
1183 kes Move drop root privilege and check_catalog() before fork.
1184 kes Add update database scripts (version 9 to 10) to updatedb directory.
1186 ebl Check size and age of each file after its backup to see if
1187 it has changed during backup, if 'checkfilechanges' is set.
1188 The FD will do an extra check (stat(2)) after
1189 each file backup. mtime, ctime and size are compared with
1190 'before backup' information. If time or size mismatch, an
1191 error message will be generated. You must upgrade FD to use it.
1193 kes Make database name and user configurable
1194 --with-db-name=xxx --with-db-user=xxx
1195 kes Add back database type to message.c for debugging.
1197 kes Implement dir_sql() which issues an SQL query.
1198 kes Modify bat medialist to use dir_sql() and do some minor C++
1199 formatting as well as eliminating a number of pointers, simplifing
1202 kes Fix some of the mtx-changer grep commands for tape label readers.
1203 kes Convert a number of bsendmsg into the appropriate send/warning/error
1204 message class calls.
1205 kes Suppress the using database message in the .sql command.
1206 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1208 kes Add context menu for floating a window.
1209 kes Some minor cleanup and name changes in qt-console
1210 kes Add doing mt setblk 0 in Win32 mtx-changer.
1211 kes Apply Martin's bug fix to move definition of ENODATA for
1213 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1214 sqlite2 and sqlite3.
1216 kes More pruning cleanup.
1217 kes Turn on wait_for_drive by default in mtx-changer.
1218 kes Turn on Batch insert code by default as it now passes regression.
1219 kes Add ./configure --enable-bat to enable building of Bat.
1220 No install yet though.
1222 kes Implement a new .sql command for bat.
1223 kes Implement code to turn off pruning in obtaining the next volume.
1224 Pruning is turned off for the status dir command, but turned on
1225 for SD requests and for the list nextvolume command.
1227 kes Correct Qmsg() that was not updated correctly when committing a
1228 previous change (probably the recent TLS patch).
1230 kes Write new subroutine is_volume_purged() that explicitly checks
1231 if the Volume is purged, and if so marks it as such. This should
1232 resolve problems reported about needing to mount twice to recycle
1234 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1235 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1236 amount of duplicated code.
1237 kes Do volume pruning only for the Media Type desired (reduces pruning time
1238 if multiple Media Types are in the same pool).
1239 kes Implement more detailed info in the Job report for the Bacula version
1241 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1243 ebl Add bbatch tool to bench database and insert mode.
1244 Fix sql quote stuff in batch mode
1245 Fix sql stuff for mysql
1247 kes Correct problems with am/pm scheduling. Fixes bug #808.
1248 kes Implement new prunning code that prunes up to 1000 jobs at
1249 the same time. The same technique can be applied to a number
1250 of other prune/purge subroutines.
1251 kes Add an insanity check when starting a new tape job to ensure
1252 that the tape position has not been changed. If so fail the
1254 kes Fix Win32 build for dlls to add the folllowing:
1255 src/lib/bsock.c -- new file with new entry points
1256 src/lib/dlist.c -- new entry points
1257 src/cats/sql_create.c -- new entry point
1258 src/cats/sql_cmds.c -- new DATA item exported
1260 ebl batch mode cleanup bscan-test is ok now.
1261 kes Implement SD code to check length of disk volume before appending.
1263 kes Correct return status on db_batch... routines.
1264 kes Add call to db_write_batch_file_records() to migration code.
1265 ebl Fix AfterJob timing
1266 kes Move the checking of the database in initializion of the Director
1267 to after we drop privileges. This avoids the need for both root
1268 and bacula access to the DB.
1269 kes Correct a misplaced variable definition in src/filed/backup.c
1270 kes Correct how the new batch insert db_create_attributes_record()
1271 uses the arguments. Caused a seg fault in bscan.
1272 kes Implement lock() and unlock() methods in DEVICE class.
1273 Implement block() and set_block(xx) methods in DEVICE class.
1274 kes Modify bnet_connect() so that it uses time() to check for the
1275 wait time expiring (on some OSes, some system calls may not
1276 return immediately).
1277 kes Modify Verify to obtain the previous JobId when it is actually
1278 running rather than at schedule time (as it was in 1.38.x).
1279 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1281 kes When checking pid in pid file, continue running if the pid is
1282 the same as ours. This occurs on IRIX after a system crash.
1285 kes Extend new GUI API.
1286 kes Make the ua structure a class, and implement send_msg(),
1287 error_msg(), warning_msg(), and info_msg().
1289 kes Apply fix from for building wx-console on the Mac from
1291 kes Implement new select mechanism for GUI programs.
1292 kes Reorganize initialization of stackedWidgets in bat.
1294 kes Add updated nagios plugin supplied by Christian Masopust.
1296 kes More bat implementation.
1297 kes File migrate bug with Pool Occupancy using mediaid instead
1298 of jobids. Fixes bug #795.
1299 kes Fix orphaned buffers in filed backup and verify due to
1300 crypto buffers not freed during errors. Fixes bug #789.
1301 kes Extend new GUI api code to tree commands.
1302 kes Ensure that tree and dot commands check console ACLs.
1303 kes Permit marking directory with trailing slash.
1304 kes Allow 20 console connections (instead of only 10).
1306 kes Add smartctl call to bacula-sd.conf as an example of getting
1309 kes Modify jobq.c to let simultaneous restore jobs run. This may
1310 cause them to fail if they cannot get a drive.
1311 kes Add Client Connect Wait to Storage daemon to permit users to
1312 modify the time the SD waits for a FD connection.
1314 kes Correct virtual changer check which was backwards. This caused
1315 volumes to be unloaded into slots already occupied.
1317 kes Apply Command ACL filter to JobId list in restore command.
1318 kes Correct typeo in var.c patch.
1320 kes Don't let Bacula prune File or Job records for the current Job.
1321 kes Fix variable substitution pad + inc bug reported (with patch)
1324 kes Correct SQLite log table index as reported by Luca Berra.
1326 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1328 kes Begin implementing new comm signals for API.
1329 kes Fix a few places in lib/message.c where the open fd may
1331 kes Continue implementing lib/bsock.c (real class). Make jcr,
1332 who, host, and port private. There are new methods to access
1333 them for non-class use. This required touching a number of files.
1335 kes Add LANG=C to autoconf/randpass so it works with languages other
1336 than English. Fixes bug #788.
1338 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1340 You will not be able to generate Include/Exclude list any more.
1341 It will be fixed soon.
1342 If you want to use this, you can apply
1343 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1345 kes Restore of sockets created false error messages because Bacula
1346 no longer restores sockets, but the code was still trying to
1347 set the attributes on a non-existent file. Reported by a user.
1348 ebl finish RecyclePool feature
1349 Media will takes Pool.RecyclePool
1350 when moving from Scratch to a Pool or when user will do
1351 update volume=xxx frompool
1352 To use it, add RecyclePool = aPool to your Pool resource
1355 RecyclePool = Scratch
1359 kes Expand new BSOCK class adding signal() and new BNET signals.
1360 kes Begin enhancing the dot commands adding a new API function
1361 that returns more information and will make it easier
1362 to interface to the Director from a program.
1364 kes Make DEVICE fd private. Its new name is m_fd, and can be
1365 obtained with dev->fd() outside the class. This is the
1366 first of many DEVICE members to be made private.
1367 kes Implement Michael Renner's idea on having a virtual disk
1368 changer. I made some minor modifications (e.g. I did not
1369 implement the Virtual Changer directive, but simply set
1370 the Changer Command to an empty string.
1372 kes Implement a BSOCK send() method that writes the whole record
1373 in a single write() request rather than in two.
1374 ebl add update volume=xxx recyclepool=yyyy
1375 volume takes recyclepool from pool when using update volume=xxx from pool
1377 kes Fix encryption deblocking bug, which caused some restored files
1378 to be truncated. This fixes bug #763.
1379 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1380 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1382 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1383 ebl Use btime_t instead of uint64_t in media patch.
1385 kes Optimize the use of the database a bit in the Status dir command.
1386 Only open it when needed, ensure that if any previous database
1387 was opened, it is closed.
1389 kes Correct VolCatBytes bug from media patch.
1390 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1391 in the case of orphaned records.
1392 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1393 and File records in 300K chunks to be more efficient. This
1394 idea came from Juan Luis Frances (if I remember right).
1395 kes Apply Eric's scratch patch that moves a purged Volume to
1396 the RecyclePool. Question: how is RecyclePool set? what
1397 happens to the ScratchPool?
1398 kes Apply Eric's media patch that collects read/write media
1399 times as well as byte counts. This patch requires a
1400 simultaneous upgrade of the DIR and SD. Note, there
1401 should be some way to turn off timing. I'm not sure
1402 times are in Bacula units.
1403 kes Apply Eric's batch-insert patch.
1405 kes Update projects list.
1407 kes Implement Include/Exclude file lists in FD as dlists using
1408 the new dlistString class. This permits efficiently having
1409 large include/exclude lists and completes project Item 25.
1410 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1411 console is authorized to cancel the job. This fixes bug
1413 kes Modify SD so that the VolCatJobs medium record is updated
1414 at the beginning of a Job rather than the end. This
1415 fixes bug #775 where exceeding MaxVolJobs caused jobs
1417 kes Added a mutex around getting and setting Volume information
1418 so that multiple simultaneous jobs will single thread.
1420 Switch to using Subversion
1421 kes Remove src/pygtk-console/ from configure
1423 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1424 plus the entrypoints.
1425 kes Apply patch supplied that corrects debug print
1426 in canceling jobs for max run time. Supplied as
1427 part of bug #621, which was previously fixed.
1429 kes Test on job_canceled() and sd_msg_thread_done inside
1430 loop starting the message thread to avoid a race condition.
1432 kes Remove rl_catch_signal from console.c as it conflicted
1433 with the header definition. Fixes bug #765.
1434 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1436 kes Clarify some stored/acquire messages to indicate if the
1437 problem is with read or append.
1439 kes Fix memory leak with storage ids in cats/sql_get.c
1440 kes Terminate watchdog earlier to avoid reference to released
1441 memory -- reported by Jason Austin.
1442 kes Move closing the database from jobq.c to the director daemon
1443 termination routine. This fixes memory leaks for shadow jobs
1444 (i.e. migration jobs).
1445 kes Free up the unique jobid chain items in migrate.c. This fixes
1446 a memory leak problem.
1447 kes Convert some ugly looking for statements to use foreach_alist
1448 in findlib/find.c. This will facilitate converting the structures
1449 to use dlist (for large include/exclude lists).
1450 kes Fix a bug in the btree.c and btree.h routines, then rename them
1451 rblist and add them to be built in src/lib. Include some new
1452 methods written by Rudolf Cejka that make the code more readable
1453 (hides some of the ugly casting).
1454 kes Add set_next() and set_prev() methods which make the code much more
1455 readable. Also add a new dlistString class that facilitates storing
1456 strings in dlists. To be used in the large include/exclude lists.
1457 kes Make some trivial modifications to lib/tree.h that use rblist
1458 rather than dlist for storing the tree links. This was suggested
1459 by Rudolf Cejka. The result of this is that the restore tree now
1460 uses red-black binary trees rather than simple linked lists. This
1461 should give rather dramatic speed improvements for directories
1462 contining large numbers of directories/files (more than 10000).
1464 kes Fix maxruntime bug #621.
1466 ebl Implement the include JobID in spool file name project.
1467 kes Reorder projects file in order determined by Jan 2007 vote.
1468 kes Implement item #12 on project list -- quick release of FD by
1470 kes Fix open of SQLite3 db where user does not have write permission
1471 so that DIR does not crash. Fixes bug #761.
1473 kes Add back missing @ in Win32 Makefile.
1474 kes Change 'Device not configured to autolabel' from INFO
1476 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1477 which should restart an indefinite # of times.
1478 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1479 other DIR specifications.
1481 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1482 Fix path quoting in SQLite scripts.
1483 Fix problems with SHGetFolderPath.
1485 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1487 kes Fix Job restart on error bug that promotes an Inc to a Full
1488 backup. This should fix bug #755.
1489 kes Add qt-console and first cut of code.
1493 kes Fix Bacula->Documentation link on Win32 to point to index.html
1494 instead of bacula.html. Fixed bug #750.
1495 kes Return JobId in db_get_job_record() when JobId==0. This should
1497 kes Do not release source pointers when restarting a failed job.
1499 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1500 This *should* fix bug #747.
1501 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1504 kes Modify USTORE constructor to set an empty store_source string,
1505 and don't copy the store_source string in a cancel. Hopefully
1506 this will fix Arno's seg fault, bug #744.
1507 kes Add back code to disable conio in configure. Fixes bug #743.
1508 kes Correct the Options scanner in the FD to correctly handle
1509 SHA1 option, which was eating the next option. Reported by
1511 kes Add code to indicate when the SD is spooling, spool wait, and
1512 despooling as requested by Alan Brown.
1514 Version 2.0.0 released: 4 January 2007