1 Technical notes on version 2.3
5 kes Apply patch (with some difficulties) from Joao Henrique Freitas
6 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
8 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
9 ftruncate() actually works. In the case of some (cheap) NAS devices,
10 it does not, and so recycling NAS Volumes does not work. The code
11 simply unlink()s the file, then recreates it. This fixes bug #1011.
13 kes First incomplete cut of big malloc blocks for htable.
14 kes Tweak plugin code.
16 kes Plugin debug code + tweak a couple bat dialog layouts
18 kes Apply Max Full Age patch submitted by Scott Bailey
19 <scott dot bailey at eds dot com>
21 kes Fix creating first JobMedia record during Migration to include
22 proper index. This caused slow restores of migrated jobs.
23 kes Temp fix to plugin name file_index.
24 kes Bacula backed up and restored a MySQL database.
26 kes Implement plugin restore.
27 kes Implement parsing of db_driver to give db_type index.
29 kes First cut of plugin restore code.
30 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
31 and do not strip paths on symbolic links.
32 kes Set catalog backup database and user name from values specified on
34 ebl Fix #1031 about wrong pool source information in job report.
37 kes Remove a redundant jcr argument to find_files, match_files, and
39 kes Implement '.status dir header|scheduled|running|terminated' that
40 prints the requested status section. With the exception of the
41 header, the other reports have fields separated by tabs (\t).
43 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
44 a resource embedded run command to find a since time if no explicit
45 since time was supplied on the command line.
46 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
47 that updates the state file at job termination time in addition to
48 when the daemon terminates.
50 kes First version where a plugin did a backup.
51 bpipe-fd.so created a backup file, wrote a test
52 string to it, and Bacua could restore this fabricated file.
54 kes Implement DB Driver = string for the DBI driver.
55 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
56 kes First cut of code for loading Win32 plugin dlls. Implement
57 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
58 and implement a dlfcn.h file based on opengroup's definitions of
61 kes First cut plugin directives.
63 kes Apply patch from bug #1049 to prevent stripping the path on a
65 kes Attempt to fix bug #1047 where stripping a path corrupts the
66 heap. Waiting for feedback.
67 kes Correct the Mount message not to suggest labeling a new tape
68 when doing a restore. Submitted by email by John Stoffel.
69 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
70 FD by using casting. Reported in bug #1042.
72 kes A bit of crypto cleanup. More later.
76 kes Apply patch from Martin to correct bug #1040, bscan sets existing
78 kes Fixed important spelling error in doc -- bug #1045.
80 ebl Fix bextract to be able to extract non-portable Win32 data to
82 kes Move initialization of read/write res lock earlier in the code.
83 This fixes the crash with a null conf file. This fixes bug
85 kes Redefine CURES in lib/parse_conf to be URES and move it all
86 into lib/parse_conf.c -- this responds to bug #1042, but does
87 not fix it. The fix is not to compile with FORTIFY_SOURCE.
88 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
89 the trunk SVN. I don't think this was reported as a bug.
91 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
93 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
95 kes Add DataDespooling and DataCommitting status (committing is
97 kes Finish implementation of new reservations code noted below.
99 kes Fix bsnprintf for float point numbers. I broke recently when
100 parameterizing some variables. This fixes bug #1036.
101 kes Undo recent reservations changes ... will apply them later
102 when they work better.
104 ebl Fixes #1034 which cause mysql to hang the connection after 8h
105 ebl Change default statistics target of filename.name and path.path
106 fields for PostgreSQL. This speeds lookup by indexes. Thanks
108 kes A few more tweaks to new reservation code. Make sure to clear
109 vol released flag when retaking volume. When reading label and
110 label is bad mark volume unused. When recycling, mark volume
111 unused so it can be renamed.
113 kes Fix reserve_volume() so it doesn't release a volume in use
114 (i.e. a volume entry not marked released). This should be
115 the last part needed to fix bug #1018.
117 kes Move Heartbeat documentation from Job to Director resource.
118 This fixes bug #1033.
120 kes Fix existing switch drive SD code to call autochanger to release
121 any old volume. This must be done to keep the autochanger from
122 releasing subsequently newly reserved volumes in doing a close().
123 This should fix bug #1018.
124 kes Fail if attempting to get console input in batch mode. This
125 should help fail RunScript console commands that are incomplete.
126 kes First cut implementing switch_drive() in SD (not actually called).
128 kes Implement first cut running console commands in a RunScript.
130 ebl Fixes bug #1028 where 'Selection Type' option was not usable
132 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
135 Release Version 2.2.7
137 kes Add new free_tls() entry point so that Win32 builds.
138 kes Fix compile warning in src/lib/util.c
139 kes Fix entry point for edit_job_codes() so that Win32 builds.
140 kes Fix seg fault Frank Sweetser reports in regression testing
141 on his systems. The problem was that the original author of
142 bsnprintf.c did not take into account the side effects of
143 using ++x in the argument to a #define.
144 kes Make SD protocol backward compatible with version 2.2.x.
146 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
147 because Bacula no longer restores sockets.
148 ebl Always use ignorecase fileset option on win32 FD.
150 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
151 that implements double quoting include names in conf files,
152 and also allows piping input by having the first character
153 be a vertical bar (|).
154 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
155 that implement %f in RunScripts to pass the FileSet name.
156 kes Skip leading | when lex input comes from a pipe as suggested
157 by Michael Stapelberg <michael@stapelberg.de>.
159 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
160 Nerijus Baliunas <nerijus@users.sourceforge.net>
162 kes Implement Plugin Directory and plugin events.
164 kes Implement a security enhancement: TLS authentication but no
165 encryption. Enabled by setting 'TLS Authentication = yes'.
166 Note when this is on, TLS encryption is turned OFF!
168 kes This patch corrects a problem where the maximum concurrent storage
169 jobs counter gets out of sync during restore jobs causing jobs to
170 'wait on max Storage jobs'. This patch fixes bug #1009.
172 kes This patch fixes bcopy so that it produces correct Volumes.
174 kes This patch eliminates spurious output to the console during a VerifyVolume
175 job that contains encrypted data. It fixes bug #1024.
177 kes This patch prevents the 'status dir' command from trying to use a scratch
178 volume and possibly moving it from one pool to another. This patch fixes
181 kes Add new include to postgresql.c suggested by Marc Cousins so
182 that it compiles correctly with pgre version 8.3.
184 kes Fix --archivedir addition to configure. Replace it with
185 --with-archivedir in configure.in This fixes the regression
187 kes This patch fixes bug #1012 where the job is canceled because
188 of Max Run Time exceeded when the job has not yet started.
190 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
191 one 'part' to write. Instead of each part being stored on disk,
192 written to DVD, then deleted from disk, all parts are written to disk,
193 and only the last is written and deleted from disk.
194 kes This patch fixes the status command to include the formating string for
195 JS_AttrInsterting. It fixes bug #1021.
196 kes This patch should fix the Mac OS X build problem on the latest
197 Darwin, where sys/types.h was not included correctly (apparently
198 due to a change in the Mac headers). The solution was to explicitly
199 ensure that it is defined for the ./configure.
200 This patch also has a rebuild of configure that includes the Debian
201 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
202 kes This patch should ensure that queued messages to the console are
203 displayed as soon as possible. It should fix bug 1007, but has been
204 reported not to work.
206 kes This patch fixes the infinite loop when trying to increase the
207 maximum number of volumes in a Pool during the add command.
208 This patch fixes bug #1008.
210 Release Version 2.2.6
212 db Remove extra data on estimate command in joblist for bat.
214 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
215 really change anything, but is the beginning of doing it *right*.
216 To do it completely right the LastWritten date must be passed to
217 the SD, but it is not yet done.
218 kes Minor tweaks to some bat restore SQL.
219 kes This patch fixes bug #1003 where putting the message output from
220 a Verify job into the catalog results in a recursive loop. The problem
221 seems to show up only with postgresql (to be verified).
222 kes Correct %x to %p in postgresql debug statement.
224 kes Fix bug #942 where lots of emails where generated when the heartbeat
225 interval was low and Bacula wanted a different tape from the one in
228 ebl Add new SD despooling attributes and Dir inserting attributes
229 job status codes in the catalog (Status table).
231 ebl Use qmake-qt4 instead of qmake when available (debian system).
233 kes Add a security warning to src/cats/make_catalog_backup.in indicating
234 that passing the password via the command line (arg 3) is insecure.
235 This responds to bug #990 (it doesn't fix it).
237 kes Set default debug_level to zero. This corrects bugs #991 and #993.
238 kes Fix a crash in bat when it cannot connect to the Director for example
239 if the Director is not running.
240 kes Remove redundant INDEX (JobId) from File table in the trunk.
242 kes Make explicit exception to GPL in LICENSE to permit linking
243 the Win32 FD with Microsoft VSS code.
244 kes Apply the Solaris package patch from
245 Masopust, Christian <christian.masopust@siemens.com>
246 kes Apply the patch to optionally add a timestamp in the debug output
247 submitted by Mariusz Czulada <manieq@wp.eu>.
249 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
250 backend (sql_strerror). Fixes bug #989
252 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
253 It applied with no problems.
254 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
256 kes Redirect stderror to stdin on mt status command in mtx-changer.in
257 since the status is returned on stderr on Solaris.
258 kes Activate Close button on tray-monitor window. This fixes
260 kes Check for NULL item in parse_conf.c before calling it. In the
261 case of Device, there is no item and this caused a seg fault when
262 Device appears in the conf file.
263 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
264 avoids pulling in config.h multiple times in some new code.
266 kes Fix spurious warning message printed when creating a volume with
267 a LabelFormat. This fixes bug #976.
269 Release Version 2.2.5
271 kes Add JobId in place of Job name in all the Jmsg() output.
272 kes Correct the APP_DESC for the Win32 storage service (remove an e).
274 kes Make maxvol-test and new more strict maxvol2-test work.
275 kes Print JobId in all Jmsg() job output.
277 kes Add new SD despooling attributes and Dir inserting attributes
278 job status codes. This fixes bug 961.
279 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
281 kes Fix doc issue. This fixes bug #963.
282 kes Fix listing performance problems in bat. Pointed out by
284 kes Remove old debug code.
285 kes Fix bat code that tests for Win32. This should fix bug #968
286 kes Query 5 list wrong Vol after migration. This fixes bug #960
288 ebl Fix #969 where user can't change Replace option in restore menu.
290 kes Save jcr in thread specific data (tsd) for each thread.
291 kes Make Dmsg() print JobId as -%u.
292 kes Make Jmsg, Emsg, and others automatically pickup the jobid
293 for the thread if it exists.
294 kes Remove old reservation debug jid code.
295 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
296 ebl Add an option that permit to specify spool size in job
297 definition. (Applying patches/testing/spoolsize_per_job.patch).
298 You must upgrade SD and DIR at the same time.
299 dvl Add new configuration item --archivedir
300 dvl Adjust regression tests to use tmp not /tmp. This will allow
301 multiple concurrent runs of the regression tests.
303 kes Fix race condition that drops final block written to volume.
304 This happens in rare cases with multiple simultaneous jobs
305 when the Volume fills. This fixes bug #964. May be related
306 to bug #935 and possibly #903.
307 kes Eliminate more strerror() and replace with bstrerror().
308 kes Remove BSD getopt and replace with unrestricted IBM version.
309 kes Fix Win32 build for changed calling sequences.
310 kes More tweaks to the mount volume routines to get everything
311 right. Changed variable name from find to have_vol, which is
312 much easier to understand.
313 kes Enhance btimer debug code.
315 kes Fix FD->SD authorization failure, which was due to spurious
316 wakeups from a pthread_cond_timedwait(). Simply check the
317 predicate before continuing. This fixes bug #953.
318 kes Add const char where needed (more to do). Remove temp debug code.
320 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
321 kes Don't overwrite error message in check_tables_version.
323 kes Unlock batch insert tables with same calls used elsewhere.
324 kes Allow starting 59 jobs a second.
325 kes Make SD session key more random.
326 kes Add retry for SQLite opening db if it fails. Probably helps
328 kes Suppress extra error messages during batch insert failure.
330 kes Add jcr to timer packets so if killed message can be sent to job.
331 kes Add JobId to all Dmsg() output.
332 kes Put some FD auth code on dbglvl rather than fixed.
333 kes Return insert attributes error message in db msg buffer to avoid
334 false error messages. Helps fix bug #966.
335 kes Separate batch init error messages. Probably helps fix bug #966.
336 kes Make SD code that contructs attribute insert check string lengths
338 kes If Dir gets an error during inserting attributes, cancel SD.
339 This reduces unnecessary error messages.
341 kes Correct search boolean for getting Volume info
342 ebl Cleanup batch insert code. Probably fixes bug #965.
343 kes Back out one small change to the reservation system (reserving a volume).
344 kes Rework how a Volume is mounted. It is now much more intelligent and
345 will always attempt to use any mounted volume if possible and reduces
346 calls to the Director asking about volumes.
348 kes Turn off some code when batch insert not enabled.
349 kes Edit FD name in connect error messages.
350 kes Rework the reservation system to take into account that the Director
351 might give us a Volume that is different from the current one being
352 used, and to ensure that we don't exceed Maximum Volume Jobs.
353 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
354 fatal error with multiple jobs running'
355 kes Add more debug code in reservation system.
356 kes Implement maxvol-test to check bug #947.
358 kes Add code to handle tray monitor separated from Win32 FD.
359 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
361 kes Add missed return in fixing verify bug -- trunk only.
362 ebl Fix a command parser issue causing a director segfault.
363 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
365 kes Increase the max block size to 4MB fixes bug #957.
366 kes ERABT if user sets min block size > max block size. Fixes bug #956.
367 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
368 is not properly mounted (recognized) during a poll.
369 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
370 Job that has differences reports Verify OK.
371 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
373 ebl Add an option to operate on all pools with update vol parameters.
374 This complete the project 20. Patch from Nigel Stepp.
375 ebl Add history support to bconsole when using readline.
376 Using Ctrl-D to exit doesn't update .bconsole_history
377 kes Modify new volume algorithm to use max MediaId for generating next
378 volume number rather than the count of Volumes. This should essentially
379 eliminate the failure rate if some volumes were deleted. Bug #921.
380 kes Begin implemention of Optimize Job Scheduling.
381 kes Implement restore callback that Dirk and I agreed on for bat
382 restore. This fixes bug #928. Restore of backup of zero files fails.
383 kes Fix SQL Catalog logging which broke with new db_escape_string
386 Release Version 2.2.4
388 kes Fix bacula_cats.def for new db_escape_string().
389 kes Increase size of name string when FD making connection to SD.
390 May fix bug #953. FD->SD connection failure.
392 kes Add code to help Dan debug 2drive-incremental-2disk test.
393 kes Add code to try to fix bug #908.
394 kes Add waits to multiple exit detection code to try to force pid
395 file to always be deleted.
396 kes Restore good dev.tar.gz to rescue set appropriate binary property.
398 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
399 trying to switch drives by checking for blocking before unblocking.
401 kes Cancel storage daemon in all cases where FD reports error. This
402 should fix virtually all cases of bug #920.
403 kes Fix db_escape_string() for MySQL which did not compile.
405 kes Fix error message that was clobbered when Dir tells SD it does not
406 have write permission on Volume. This should fix a minor point
407 in bug #942, but not the main problem.
408 kes Add code to cancel job in SD if FD connection fails. This should
410 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
411 dvl Pass jcr and db into db_escape_string() to enable better escaping
413 kes Fix migration code to get correct Volume name with multiple volumes
414 by skipping |. Fixes bug #936.
415 kes Implement patch supplied by Landon to fix bug #944 where using
416 TLS with bconsole uses 99+% of the CPU.
417 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
419 kes Move patches into patches directory.
421 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
424 ebl Using 'm' in bconsole will show messages like before,
425 and not memory usage.
426 kes Fix bug #935, and probably also bug #903 where files were not
427 restored. MediaId was not properly set in JobMedia record after
430 kes Suppress chown and chmod error messages if the FD is not running
433 kes Apply Martin Simmons' patch that should turn off the new API usage
434 when batch insert is turned off allowing building on older
436 kes Add ./configure search in qwt-qt4 for qwt package
438 kes Bacula is now free of 3rd party GPL copyrighted code!
440 kes Add guid_to_name.c/h which replace idcache.
441 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
443 ebl Detect if new PosgreSQL batch insert API is present.
444 kes Correct incorrect mempool call causing Director crash. Occurs on
445 systems without va_copy().
446 sb Update spec files for 2.2.1 release
448 kes Fix memory pool call in ua_output.c. bug #934.
449 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
450 Add test program to fnmatch.c
452 kes Integrate patch to README.vc8 from
453 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
454 edit it to get it into Unix patch format.
455 kes Implement mkpath.c to replace old FSF makepath.c
457 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
459 Release Version 2.2.1
461 kes Update POTFILES.in
462 kes Cleanup a few underquoted AC_DEFUNs in configure
463 kes Apply patch from Martin Simmons that adds a test for va_copy to
466 kes Fix bug #921 by increasing the number of tries to create a new volume
468 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
469 can be called multiple times. Implement a version for machines
470 without va_copy() that gets a big buffer.
472 kes Integrate more portable zone offset code into bsmtp.c
473 Submitted by Attila Fülöp.
475 kes Fix bad SD->FD return status reported by
476 (James Harper) <james.harper@bendigoit.com.au>
477 ebl Fix a bug in read_close_session which return random status
478 thanks to James Harper
480 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
481 and directory names during restore of single file/directories.
482 kes Add sanity checks to .sql command when string is empty. Hopefully
483 that will resolve Dirks Director crash.
485 kes Apply patch submitted by Martin Simmons that corrects a seg fault
486 in the bsmtp chat subroutine when debug is >= 10.
488 kes Fix Director crash when running bat SQL queries.
489 kes Add David's notes on Item 8: Copy pools.
491 kes Rework projects file to be current and ready for a vote.
492 kes Enhance lex scanner error message.
494 kes Tweak LICENSE file to mention BSD code.
495 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
496 if specified on the ./configure.
497 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
498 This class is intended to allow us to open a second bsock to the
499 Director while in the restore subdialog.
501 kes Fix configure to create bat Makefile before creating dependencies.
502 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
503 kes Add a tooltip to the tray monitor.
504 dvl Set the Director's PID file before dropping privs. This fixes
507 kes Update AUTHORs file
508 kes Increase the default max concurrent jobs to 20 in FD and SD to
509 correspond with the default .conf files.
510 kes Rewrite the Win32 service routines. This eliminates the 3 copies
511 some different, of the same file created by RN when porting the
513 kes Rearrange some of the Win32 directories and the placement of the files
515 kes Set DEVELOPER flag in version.h
517 ========================================================================
518 Release Version 2.2.0
520 kes Apply a second doc patch from Marc.
521 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
522 improves the tips section that discusses how to setup multiple
525 kes Update bat README file.
526 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
527 corrects a typo in the Recycle status check in db_find_next_volume().
528 This will probably fix a number of annoying problems with multiple
530 kes Modify most of dird/msgchan.c to use bsock class calls rather than
531 bnet calls -- no functionality change.
533 kes Modify the Verify output to specify if files are missing on
534 the Volume(s) or disk. Fixes confusion in bug #916.
535 kes When more than one Volume is read in a migration job, the last
536 Volume bytes reported are from the last read volume rather than
537 the last written volume. Fixed. This fixes bug #910.
538 kes Fix display of Recycle flag after update volume=foo recycle=yes.
539 It previously printed New Recyle flag is: no. This fixes bug
542 kes Correct seg fault when switching tape drives during restore.
543 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
544 be used until after 2.2.0 release.
546 kes Remove fnmatch() in SD that permitted wild card specifications.
549 kes Fix %g in filename returned by SQL for browse tree reported by
551 kes Fix configure so that it puts config.out in the cwd rather than
553 kes Attempt to fix the locking problem reported by Eric in bug #906.
554 kes Make berrno class to leave errno unchanged after constructor call.
555 kes Make bnet_server use the heap rather than the stack to allocate
556 its socket fd pointers to avoid a crash at termination. Problem
557 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
559 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
560 and putting it in depkgs-qt along with Qt4.3.
562 kes Rework code in acquire.c that switches drives for reading when
563 the Media Type does not match. This should fix bug #906
565 ebl Fix a director segfault during job setup #907
566 kes Correct seg fault in postgresql when first operation returns no
567 rows. Fixes Dirks File browser problem seg fault with bat.
569 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
570 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
573 kes Implement PopUp YES/NO dialog for bat.
575 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
577 kes Correct RunScript to terminate job in FD on failure.
578 kes Change abort_on_error and AbortJobOnError to fail_on_error
579 and FailJobOnError in RunScripts.
580 kes Minor tweaks of code formating in RunScripts, principally to
581 avoid depassing 80 columns.
583 kes Eliminate one #ifdef Win32 in bsmtp
584 kes Implement grow tool to grow a file for testing very large databases.
585 kes Add big-vol-test to test Bacula seeking with > 5GB.
588 kes Modify find_next_volume() to return all values in Media record.
589 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
593 kes Update Release notes
595 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
596 Warning, in previous beta version, all media get from scratch keep their
599 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
600 This should fix bug #842. Made a note to look at removing the temp
601 files at the end of the install.
602 kes Add ability to mount and unmount a file device providing it is
603 marked as being removable and has the appropriate mount and unmount
604 commands defined in the Device resource. This fixes bug #830.
605 kes When applying a storage override, release all previous storage
606 definitions rather than just prepending the new storage.
607 This should prevent a good deal of confusion.
609 kes Implement ./configure search for qwt libraries.
611 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
612 Win32 FD. This should fix bug #893.
613 kes Remove an unnecessary beep in Win32 init code.
614 kes Update copyright dates in Win32 executable about boxes.
615 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
616 code with a BSD getopt.c and getopt.h.
617 kes Remove sched.h from the Win32 compat directory -- not used.
618 kes Remove the Exit menu item from the Win32 tray monitor. If you really
619 need to shut it down, do it through the services panel or the command
621 kes Remove some inappropriate Bacula FSFE copyrights.
622 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
623 kes Fix regress config non-portable test as pointed out by
624 Florian Heigl <florian.heigl@gmail.com>
625 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
626 as pointed out by Florian Heigl <florian.heigl@gmail.com>
628 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
629 Reported by Frank Sweetser.
633 kes Fix client-only build.
634 kes Integrate client-only fixes for bsys (initgroups) and conio from
635 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
636 kes Make arguments to get_scratch_volume() in same order as other
638 kes Rework the prune_volumes() subroutine so that after purging and
639 no volume found in desired pool, it will check for a scratch
640 volume. This prevents recycling the whole scratch pool.
641 kes Add code to status storage to print boffset_t (largefile support).
643 kes Move qwt (Graphics libarary for Qt4) to depkgs.
644 kes You now need a --with-qwt=<dir> to be able to build bat.
645 kes Update src/win32/cats/bacula_cats.def to include the new
646 db_get_query_dbids() call on Win32.
648 kes Correct a problem when selecting a scratch volume and moving
649 it to another pool that lost some columns.
650 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
651 kes Enhance Autochanger error messages to include Volume and device name.
652 kes Rework prune_volumes() code to take account of InChanger flag,
653 and to handle recycling volumes going to the Scratch pool and
654 current pool because the RecyclePool directive.
655 kes Implement a better and more efficient db_get_query_dbids() to
656 handle creating and passing back a list of DBIds.
660 kes Start work on new more efficient DBId subroutine. First use
661 will be for recycling volume to Scratch inchanger.
662 kes Increase number of JobIds in pruning from 1000 to 10000.
663 This to be replaced by above routine.
664 kes Begin implementation of building Qt4 on Win32.
665 kes Correct typo in fix I added for bad TLS shutdown.
666 kes Pull 2.0.3 patches into patches directory.
667 kes Update Release notes. Include qt-console in line count.
668 kes Update Projects file.
670 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
671 bug in migration code where a job that spanned two volumes
674 kes Implement new BST_DESPOOLING blocked state. Change from locking
675 during despooling in SD to blocking. This means that other threads
676 can work with the device structure, in particular the reservations
677 system while despooling.
679 kes Fix return in reservation message queue that missed clearing
680 the jcr lock (implemented 26Jun07 below).
681 kes Rename a number of dev methods to make locking function names
683 kes Document locking in lock.c. Move lock structures to new file
686 kes Move reservations message lock to lock jcr only this
688 kes Move main SD locking code into lock.c (new file).
689 kes Update Win32 build to include lock.c
693 kes Dirk committed the qwt library code for drawing graphs in bat.
694 kes Tweak install of qwt so that it is integrated with ./configure.
696 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
697 out by Eric (my typo).
698 ebl Fix configure.in to get batch mode enable
699 kes Return correct string from authenticate.cpp in bat when connecting
701 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
702 spurious line drops when using TLS.
703 kes Do not file reparse points when restoring a file that already
706 kes Implement Windows reparse points -- similar to directories, but
707 we do not descend into it. This is a first cut. They seem to
708 be backed up, but restore is not yet tested.
709 kes Remove restore_blocking in tls code when shutting a socket to leave
710 it in blocking mode. Hopefully this will fix the encryption bug
711 reported by Frank Sweetser.
712 kes When opening a file for backup, tell the OS that we are going to
713 read it sequentially -- optimization.
714 kes Change variable names in authenticate_director() to not conflict
715 with member names in bat. Caused great confusion with compiler,
718 kes Queue openssl error messages in case of comm problem.
719 kes Do shutdown() call if socket terminated.
720 kes Remove some duplicated code in tls.c
721 kes Move more of the bsock member variables into private and access
723 kes Add Frank Sweetser's tls-test to the regression suite.
725 kes Add Swedish sv.po file
727 kes Don't print clock skew message in FD if less than 3 seconds diff.
728 kes Add a bit of VSS info to status client.
729 kes Implement a first cut of Vista VSS, using Win2003 code.
733 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
734 loaded tape but uses first drive).
735 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
736 This was indeed a Win32 issue.
738 kes Simplify search of autochanger for in-use Volume.
739 kes Fix exit condition of check for in-use volume. kes Remove
740 inappropriate my_postgresql_free_result() in db_close()
742 kes Fix bad return in FD when encryption signature not found.
743 Probably caused a crash.
744 kes Inhibit missing encryption signature error messages for
745 file types where no signature computed.
746 kes Correct inverted check on autochanger in reservation system.
747 kes Tweak debug code in autochanger reservation.
749 kes Add some additional locking in the cats directory in subroutines
750 that modify packet variables called from batch insert.
751 kes Rework how dcrs are allocated. new_dcr() can now be called
752 with an existing pointer, and it will simply clean it up.
753 This allows the reservation system to test various different
754 devices, and will permit easy device changes.
755 kes A bunch of changes all over to handle new new_dcr() calling
757 kes Work more on the Volume management in the SD. Remember Volumes
758 for tape drives and for autochangers (even virtual disk changers).
759 kes When looking at the Volume list to reserve a drive, handle
760 autochanger names correctly by interating through the changer
761 devices. Also call the Director to see if a Volume is suitable
763 kes Fix some bugs in bscan. Make sure all media records are written.
764 Make sure that valid JobMedia records are written for disk files.
765 Previously they were completely wrong.
766 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
767 that the URLs don't change and so that the developers will all
768 work off the same copy. Rebuild from scrach.
769 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
773 kes Fix seg fault in FD from incorrect digest size.
774 kes Fix argument to non-OpenSSL crypto.c subroutine.
778 kes Remove a few malloc()s from the encryption code.
779 kes Use the class calls to bsock in filed/backup.c and restore.c in
780 place of the old bnet_xxx code.
781 kes Implement code that does an on the fly calculation of the
782 signing digest during restore of encrypted files. It makes
783 a best guess at the algorithm, and if it is not correct, will
784 then revert to the old code which reads the file after it is
786 kes Implement at least one missing crypto stream in stream_to_ascii()
787 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
788 #877 where a reload with bad syntax causes Dir to exit.
790 Cut: 2.1.14 beta (not released)
792 kes Do not free a volume on a tape drive until another volume is
793 mounted and read, or the autochanger unloads the volume.
794 This should help the SD re-use volumes that are already mounted,
795 and should fix bug #886.
796 kes Apply patch from user brettedgar that allows gnome2-console include
797 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
798 kes Apply patch from Lucien Weller that fixes day of week calculation
799 because of DST flag problem. Fixes bug #887.
801 kes Move find_next_appendable_volume() to after acquiring a valid device
802 in reserve.c. This fixes bug #864 -- confirmed by reporter.
804 kes Unable to reproduce bug 872. However added additional testing for
806 kes Bug #874 resolved by documenting SQLite limitations.
807 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
808 kes Bug #881 resolved by removing typo in mtx-changer script.
809 kes Made Frank Sweetser's wiki the official Bacula wiki with his
810 approval. Added a link to the wiki on the web page, and implemented
811 a backup from http://paramount.ind.wpi.edu
813 kes Fix update allfrompool to pass pool name.
815 kes Convert to pure GPL v2 license.
816 kes Fix sscanf problems reported by Peter Buschman that caused
817 a bus error on Solaris.
818 kes Rework (simplify) the select prompt in bat.
819 kes Move get_jobid_from_tid() into lib and create a
821 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
822 should definitely fix the problem of lost error messages in the
824 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
825 kes Eliminate tcpd.h from the project. Enclose the #include from the
826 library with extern C ...
827 kes Add print of signal name when a signal is trapped.
831 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
833 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
834 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
835 makes SQLit3 run 30 times faster, though a bit less safe.
836 kes Implement --with-batch-insert in configure and detection of thread
837 safe libraries. It is on by default, but turned off if no thread
838 safe library (e.g. SQLite 2) is available.
840 kes Fix Bacula PostgreSQL buffer overruns.
841 kes Do better checking for NULL results returned from PostgreSQL;
842 implement retry for failed queries; clear results buffer after
843 failed query. Hopefully this will correct the PostgreSQL failures.
845 kes Implement algorithm to handle only one appendable volume with
846 Prefer Mounted Volumes = no.
847 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
848 returned from a query.
849 kes Make volume lock recursive.
850 kes Implement an additional volume reservation algorithm that
851 starts by considering all reserved volumes then uses the
852 old brute force algorithm of searching the resources to
853 find a suitable device.
854 kes Add new reservations debug code and refine the old code.
855 kes Update the win32/dll/bacula.defs file.
857 kes Tweak reservations algorithm to permit a few more cases, i.e.
858 volume reserved, but on different drive, ...
859 kes Enhance SD status to include Pool and Media Type for drive in a
860 more readable format (a bit longer).
861 kes Fix PostgreSQL double free.
863 kes Minor refactoring of restore decryption code.
864 kes Add code to smartall.c to detect double free of a buffer.
866 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
867 so that bsmtp will create a correct email address (mailbox only).
868 kes Modify 'memory' command so that the buffers are listed as 'In use'
869 to avoid confusion with Orphaned buffers.
870 kes I reworked the OpenSSL include/lib flags to be handled in
871 the standard Bacula way, which should fix bug #863 concerning
872 non-standard OpenSSL libraries.
874 kes Implement Help Browser window for bat.
875 kes Fix reload bug that reset StorageId to zero.
877 kes Fix TLS #ifdefing when TLS turned off.
878 kes Ensure that when labelling a tape with Slot=0 that InChanger
880 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
882 kes Add StartTime to final uar_sel_jobid_temp query so that we can
883 add DISTINCT (required by PostgreSQL).
884 kes Implement BSOCK authenticate_director() method. Eventually will
885 authenicate all daemons.
886 kes Move several more functions into the BSOCK class.
888 kes Add code to tell the OS that we no longer need a cached
889 file that we were reading. In findlib/bfile.c. Also,
890 only cache files that we are reading. Thanks to
891 Tobias Oetiker <tobi@oetiker.ch> for the idea.
892 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
893 kes Implement script to automatically generate cats and dll .def
895 kes Update README.mingw32 to include new .def file generation.
896 kes Correct typo in UTF-8 error message as reported by:
897 jhernandez <julianhernandez@gmail.com>
898 kes Add additional sm_check() code on debug level 1.
899 kes Set default debug level to 1.
900 kes Trap SIGABRT in attempt to get traceback.
902 kes Reduce bat connect timeout from 30 to 15 seconds.
903 kes More restructuring and implementing BSOCK class in place of
905 kes Remove a few unnecessary malloc() tests in crypto code.
906 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
907 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
908 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
910 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
912 kes Fix Verify InitCatalog. The attributes were not pointing to the
913 correct saved location.
914 kes Implement message callback so that GUI is sure to get all
915 daemon messages. Currently displayed in a dialog in bat.
916 kes Ignore SIGUSR2 (Bacula timer) in bat.
917 kes Apply regress patch from bug #859 to allow regress to work
918 with Solaris compiler.
920 kes Begin adding TLS support to bat.
921 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
922 clean up lex.c and make it more readable.
924 kes Move more bnet functions into the BSOCK class.
925 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
926 kes Complete change of berrno strerror() method to bstrerror()
930 kes Cleanup incorrect email addresses in bsmtp.
931 kes Make bat display initial messages rather than discard them.
933 kes First cut of adding .mod to the run command.
934 kes Implement auto display of messages in bat.
935 kes Enhanced preferences to allow all Bacula output to be
938 kes Try to make bsmtp date routines more generic.
939 kes Fixed bug #856 autochanger documentation.
940 kes Rework bsmtp date editing for Win32. This fixes bug #854.
941 kes Add new cats entry point so Win32 builds.
943 kes Attempt to fix bsmtp date editing on OSes without %z editing.
945 kes Do better checking for the MySQL 64 bit libraries looking for both
946 .a and .so libraries.
947 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
948 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
949 kes Require the thread safe version of MySQL during configure. Thanks
950 to Andre Noll for pointing this out.
951 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
952 continuing in migration code.
953 kes Apply implementation of tray-monitor font derived from gnome-console
954 submitted by Andreas Piesk <a.piesk@gmx.net>
956 kes Eliminate important memory loss in SQLite
957 kes Fixed the batch insert MySQL thread specific data that was not
958 being freed. See cats/mysql.c:db_thread_cleanup().
959 kes Fix restore before command.
960 kes Convert old hdr.name to name() in a few places.
961 kes Implement update jobid command.
962 kes Return all time_t dates in db_get_job_record()
963 kes Stop watchdog in SD earlier.
964 kes Put Pool just after Storage in please mount message.
965 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
968 kes Update the po files.
969 kes Fix Verify InitCatalog by making it cache attributes.
971 kes Change name bacula-bat to bat for man 1 page to correspond to
973 kes Check for client and store NULL pointers in status command. This
975 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
976 kes Fix sign extended editing of %p.
977 kes Clean out a little old #ifdefing in cats/mysql.c
979 kes If time diff between DIR and FD is more than 600 seconds convert
980 INFO message to WARNING.
981 kes Implement heap size display in status for all daemons.
982 kes Attempt to fix MySQL db open memory loss (not successfull).
983 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
984 kes Eliminate memory loss in MySQL (possibly other SQLs) during
985 Query. This looks like a MySQL but but by doing extra releases,
986 the memory goes away. This should fix bug #847.
988 kes When backup fails, cancel SD before waiting for sd termination.
989 kes If SD is waiting for FD to connect during cancel, wake up the
991 kes Fix fsf code so that errno is correctly reported.
992 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
994 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
995 so that Bacula doesn't later stumble into a seg fault.
996 kes Use the term Restore Client in the restore Job report.
997 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
998 the original job's FileSetId.
999 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1000 spooling in migration jobs. Not yet tested.
1001 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1002 reading conf file from a pipe. However, do it with open_bpipe()
1003 rather than popen. Not yet tested.
1005 kes Fix an ugly bug where the VolCatBytes were getting updated
1007 kes Implement bconsole memory command that prints current memory
1008 usage, plus smartalloc dump.
1009 kes Clarify some error messages in backup, admin, and migrate.
1010 kes Shrink label dialog to smaller size.
1011 kes Invert Cancel OK buttons on restore to be OK Cancel.
1012 kes More strerror() to bstrerror() conversions.
1014 kes Start implementing bstrerror() in place of strerror().
1015 kes Stripping path -- seems to work.
1017 kes Prevent door and port files from being restored (mostly
1019 kes Free an unreleased buffer in compat code.
1020 kes Change console Job name from *Console* to -Console- to eliminate
1021 Win32 filename problems. Put Win32 path separator when creating
1022 Console file. This fixes bug #846.
1023 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1025 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1027 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1028 to force Win32 error message.
1030 kes First cut strip path. The data should be passed to the FD,
1031 but nothing is done with it yet.
1032 kes Enhance the digest and signature routines in the crypto
1033 library to accept a JCR and to use it to print error messages
1034 so that they will go in the Job report rather than the daemon's
1036 kes Simplify some of the verify signature code.
1037 kes Simplify a few of the alternative returns in the signature
1040 ebl Use only POSIX regex instead of GNU regex in breg.c for
1041 File relocation. It fix broken freebsd compilation.
1042 kes Convert all other Dir files to use new ua class message
1044 kes Tentative fix for missing digest signature in bug 807.
1045 kes Correct handle problem in new win32_ftruncate routine.
1046 kes Convert ua_purge.c and ua_update.c to use new ua class
1047 message routines for bat.
1049 kes Correct incorrect installation of LICENSE in Win32 installer.
1050 kes Display LICENSE at the beginning of the Win32 install.
1051 kes Attempt to correct the need for the png files to be installed
1053 kes Reapply my bat.conf install script in qt-console. I think I
1054 editted bat.pro instead of bat.pro.in and it was lost.
1055 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1056 the /var/lock/subsys for subsysdir. Also corrects typos in the
1059 kes First cut update job.
1060 kes Correct configure to include qmake of src/qt-console directory.
1062 kes Make restore job yes/mod/no print in one command so GUI works.
1063 kes First cut implementing backup and restore client.
1064 kes Correct editing in Verify output that caused a seg fault.
1066 kes Insure that bat.conf is not overwritten during installation.
1067 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1068 while I was implementing migration in March 2006 !
1070 ebl Cleanup file relocation, using char *RegexWhere instead of
1071 char *where + bool where_use_regexp
1072 kes Update some manpages and add bat manpage.
1073 kes Make a first cut at converting bacula.spec.in for bwx-console
1075 kes Apply patch from John Goerzen to add hostname as fourth argument
1076 to make_catalog_backup script.
1077 kes Fix typos I introduced into bsmtp.c
1078 kes Make pm_strxxx() routines handle input of NULL pointer. This
1079 is to protect from NULL pointers returned from SQL databases.
1080 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1081 kes Add more debug to FIFO code -- fix fifo regression test.
1083 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1084 kes Add thread timer to bnet_connect() to break from OS if wait time
1087 kes Update Win32 build to include new files, new symbols, and
1089 kes Implement socket level heartbeat (tcp_keepidle)
1090 ebl Commit File relocation patch
1091 kes Make bat have 'make install' target.
1092 kes Warn during install if old gnome-console binary found.
1093 kes Warn during install if old wx-console binary found.
1094 kes Add -8 option to bsmtp command line to add content type utf-8.
1095 Fixes bug #809. (Character coding problem in bsmtp).
1096 kes If < is found in target (from, to, cc) then do not enclose the
1097 target in < > in bsmtp. Fixes bug #772 (malformed address).
1098 kes When printing certain items in dbcheck, stop after 300000.
1099 Fixes bug #822. (dbcheck loops).
1100 kes Incorrect status in Dir after waiting for mount with poll set.
1103 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1105 kes Print waiting to reserve a device every 5 mins.
1107 kes Don't call close_part in label.c if tape and relabel.
1108 kes Don't free volume if busy in close() -- should help with
1110 ebl Fix #824 RunScript bug (After script could be execute twice)
1111 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1112 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1113 Add a regression script to test RunScript
1115 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1118 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1119 deprecated. No additional bugs will be fixed, and they will be dropped
1120 in a future release (probably 2.4.0).
1121 kes Change name of wx-console to bwx-console to make it more Bacula
1123 kes Change the name of gnome-console to bgnome-console to make it
1126 kes Some time in March, a Feature Request with patch from Jorj Bauer
1127 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1129 The ability for the director to validate a Client (FD) CN against
1130 an arbitrary set of patterns rather than the hostname, with
1131 A new 'TLS Allowed CN' set of directives which are implemented
1132 in the Client resource. Then pattern matching is used in place
1133 of hostname matching against the Certificate's CN. As an example, we
1134 have certificates which (a) use a local CA, and (b) have a CN of the
1136 kes Add new/changed entry points to Win32 build
1137 kes Create unaccepted-projects for projects that are not accepted.
1138 kes Simplify locking in the reservations system.
1139 kes Add more debug code in reservations.
1140 kes Make sure error condition on reserving a volume is handled correctly.
1141 kes Correct handling of volume_in_use.
1142 kes Correct handling of initializing a device.
1143 kes Move handling of broadcasting releasing a device into release_device().
1144 kes Correct attaching dcr to dev so that it is only done if device
1145 is properly initiated.
1147 kes Locking debug level tweaks in SD.
1148 kes Tweak new Volume code.
1150 kes Add exec external-command [wait-seconds] to bconsole. This
1151 executes the external-command. Note! normally external-command
1152 should be enclosed in double quotes.
1153 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1154 it should normally be off in a production system.
1156 kes Implement die command for SD so that we can force it to dump.
1157 kes Implement SD lock debug code.
1158 kes Implement new algorithm for keeping Volume list in SD. It
1159 is now owned by the device.
1161 kes Implement new code for freeing in use volumes that should
1162 resolve if not all, some of the problems of multiple drive
1163 tape conflicts described in bug 801.
1165 kes Fix gui/bacula-web/images files in svn.
1166 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1168 ebl Fix a bug in batch mode (in string escape)
1169 kes Correct migration prune SQL typo that crept in in a
1170 recent 2.1.x change.
1172 kes Move bnet_despool() into class in bsock.c
1173 kes Modify job report to include director name and Build OS.
1174 kes Move drop root privilege and check_catalog() before fork.
1175 kes Add update database scripts (version 9 to 10) to updatedb directory.
1177 ebl Check size and age of each file after its backup to see if
1178 it has changed during backup, if 'checkfilechanges' is set.
1179 The FD will do an extra check (stat(2)) after
1180 each file backup. mtime, ctime and size are compared with
1181 'before backup' information. If time or size mismatch, an
1182 error message will be generated. You must upgrade FD to use it.
1184 kes Make database name and user configurable
1185 --with-db-name=xxx --with-db-user=xxx
1186 kes Add back database type to message.c for debugging.
1188 kes Implement dir_sql() which issues an SQL query.
1189 kes Modify bat medialist to use dir_sql() and do some minor C++
1190 formatting as well as eliminating a number of pointers, simplifing
1193 kes Fix some of the mtx-changer grep commands for tape label readers.
1194 kes Convert a number of bsendmsg into the appropriate send/warning/error
1195 message class calls.
1196 kes Suppress the using database message in the .sql command.
1197 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1199 kes Add context menu for floating a window.
1200 kes Some minor cleanup and name changes in qt-console
1201 kes Add doing mt setblk 0 in Win32 mtx-changer.
1202 kes Apply Martin's bug fix to move definition of ENODATA for
1204 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1205 sqlite2 and sqlite3.
1207 kes More pruning cleanup.
1208 kes Turn on wait_for_drive by default in mtx-changer.
1209 kes Turn on Batch insert code by default as it now passes regression.
1210 kes Add ./configure --enable-bat to enable building of Bat.
1211 No install yet though.
1213 kes Implement a new .sql command for bat.
1214 kes Implement code to turn off pruning in obtaining the next volume.
1215 Pruning is turned off for the status dir command, but turned on
1216 for SD requests and for the list nextvolume command.
1218 kes Correct Qmsg() that was not updated correctly when committing a
1219 previous change (probably the recent TLS patch).
1221 kes Write new subroutine is_volume_purged() that explicitly checks
1222 if the Volume is purged, and if so marks it as such. This should
1223 resolve problems reported about needing to mount twice to recycle
1225 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1226 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1227 amount of duplicated code.
1228 kes Do volume pruning only for the Media Type desired (reduces pruning time
1229 if multiple Media Types are in the same pool).
1230 kes Implement more detailed info in the Job report for the Bacula version
1232 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1234 ebl Add bbatch tool to bench database and insert mode.
1235 Fix sql quote stuff in batch mode
1236 Fix sql stuff for mysql
1238 kes Correct problems with am/pm scheduling. Fixes bug #808.
1239 kes Implement new prunning code that prunes up to 1000 jobs at
1240 the same time. The same technique can be applied to a number
1241 of other prune/purge subroutines.
1242 kes Add an insanity check when starting a new tape job to ensure
1243 that the tape position has not been changed. If so fail the
1245 kes Fix Win32 build for dlls to add the folllowing:
1246 src/lib/bsock.c -- new file with new entry points
1247 src/lib/dlist.c -- new entry points
1248 src/cats/sql_create.c -- new entry point
1249 src/cats/sql_cmds.c -- new DATA item exported
1251 ebl batch mode cleanup bscan-test is ok now.
1252 kes Implement SD code to check length of disk volume before appending.
1254 kes Correct return status on db_batch... routines.
1255 kes Add call to db_write_batch_file_records() to migration code.
1256 ebl Fix AfterJob timing
1257 kes Move the checking of the database in initializion of the Director
1258 to after we drop privileges. This avoids the need for both root
1259 and bacula access to the DB.
1260 kes Correct a misplaced variable definition in src/filed/backup.c
1261 kes Correct how the new batch insert db_create_attributes_record()
1262 uses the arguments. Caused a seg fault in bscan.
1263 kes Implement lock() and unlock() methods in DEVICE class.
1264 Implement block() and set_block(xx) methods in DEVICE class.
1265 kes Modify bnet_connect() so that it uses time() to check for the
1266 wait time expiring (on some OSes, some system calls may not
1267 return immediately).
1268 kes Modify Verify to obtain the previous JobId when it is actually
1269 running rather than at schedule time (as it was in 1.38.x).
1270 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1272 kes When checking pid in pid file, continue running if the pid is
1273 the same as ours. This occurs on IRIX after a system crash.
1276 kes Extend new GUI API.
1277 kes Make the ua structure a class, and implement send_msg(),
1278 error_msg(), warning_msg(), and info_msg().
1280 kes Apply fix from for building wx-console on the Mac from
1282 kes Implement new select mechanism for GUI programs.
1283 kes Reorganize initialization of stackedWidgets in bat.
1285 kes Add updated nagios plugin supplied by Christian Masopust.
1287 kes More bat implementation.
1288 kes File migrate bug with Pool Occupancy using mediaid instead
1289 of jobids. Fixes bug #795.
1290 kes Fix orphaned buffers in filed backup and verify due to
1291 crypto buffers not freed during errors. Fixes bug #789.
1292 kes Extend new GUI api code to tree commands.
1293 kes Ensure that tree and dot commands check console ACLs.
1294 kes Permit marking directory with trailing slash.
1295 kes Allow 20 console connections (instead of only 10).
1297 kes Add smartctl call to bacula-sd.conf as an example of getting
1300 kes Modify jobq.c to let simultaneous restore jobs run. This may
1301 cause them to fail if they cannot get a drive.
1302 kes Add Client Connect Wait to Storage daemon to permit users to
1303 modify the time the SD waits for a FD connection.
1305 kes Correct virtual changer check which was backwards. This caused
1306 volumes to be unloaded into slots already occupied.
1308 kes Apply Command ACL filter to JobId list in restore command.
1309 kes Correct typeo in var.c patch.
1311 kes Don't let Bacula prune File or Job records for the current Job.
1312 kes Fix variable substitution pad + inc bug reported (with patch)
1315 kes Correct SQLite log table index as reported by Luca Berra.
1317 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1319 kes Begin implementing new comm signals for API.
1320 kes Fix a few places in lib/message.c where the open fd may
1322 kes Continue implementing lib/bsock.c (real class). Make jcr,
1323 who, host, and port private. There are new methods to access
1324 them for non-class use. This required touching a number of files.
1326 kes Add LANG=C to autoconf/randpass so it works with languages other
1327 than English. Fixes bug #788.
1329 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1331 You will not be able to generate Include/Exclude list any more.
1332 It will be fixed soon.
1333 If you want to use this, you can apply
1334 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1336 kes Restore of sockets created false error messages because Bacula
1337 no longer restores sockets, but the code was still trying to
1338 set the attributes on a non-existent file. Reported by a user.
1339 ebl finish RecyclePool feature
1340 Media will takes Pool.RecyclePool
1341 when moving from Scratch to a Pool or when user will do
1342 update volume=xxx frompool
1343 To use it, add RecyclePool = aPool to your Pool resource
1346 RecyclePool = Scratch
1350 kes Expand new BSOCK class adding signal() and new BNET signals.
1351 kes Begin enhancing the dot commands adding a new API function
1352 that returns more information and will make it easier
1353 to interface to the Director from a program.
1355 kes Make DEVICE fd private. Its new name is m_fd, and can be
1356 obtained with dev->fd() outside the class. This is the
1357 first of many DEVICE members to be made private.
1358 kes Implement Michael Renner's idea on having a virtual disk
1359 changer. I made some minor modifications (e.g. I did not
1360 implement the Virtual Changer directive, but simply set
1361 the Changer Command to an empty string.
1363 kes Implement a BSOCK send() method that writes the whole record
1364 in a single write() request rather than in two.
1365 ebl add update volume=xxx recyclepool=yyyy
1366 volume takes recyclepool from pool when using update volume=xxx from pool
1368 kes Fix encryption deblocking bug, which caused some restored files
1369 to be truncated. This fixes bug #763.
1370 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1371 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1373 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1374 ebl Use btime_t instead of uint64_t in media patch.
1376 kes Optimize the use of the database a bit in the Status dir command.
1377 Only open it when needed, ensure that if any previous database
1378 was opened, it is closed.
1380 kes Correct VolCatBytes bug from media patch.
1381 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1382 in the case of orphaned records.
1383 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1384 and File records in 300K chunks to be more efficient. This
1385 idea came from Juan Luis Frances (if I remember right).
1386 kes Apply Eric's scratch patch that moves a purged Volume to
1387 the RecyclePool. Question: how is RecyclePool set? what
1388 happens to the ScratchPool?
1389 kes Apply Eric's media patch that collects read/write media
1390 times as well as byte counts. This patch requires a
1391 simultaneous upgrade of the DIR and SD. Note, there
1392 should be some way to turn off timing. I'm not sure
1393 times are in Bacula units.
1394 kes Apply Eric's batch-insert patch.
1396 kes Update projects list.
1398 kes Implement Include/Exclude file lists in FD as dlists using
1399 the new dlistString class. This permits efficiently having
1400 large include/exclude lists and completes project Item 25.
1401 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1402 console is authorized to cancel the job. This fixes bug
1404 kes Modify SD so that the VolCatJobs medium record is updated
1405 at the beginning of a Job rather than the end. This
1406 fixes bug #775 where exceeding MaxVolJobs caused jobs
1408 kes Added a mutex around getting and setting Volume information
1409 so that multiple simultaneous jobs will single thread.
1411 Switch to using Subversion
1412 kes Remove src/pygtk-console/ from configure
1414 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1415 plus the entrypoints.
1416 kes Apply patch supplied that corrects debug print
1417 in canceling jobs for max run time. Supplied as
1418 part of bug #621, which was previously fixed.
1420 kes Test on job_canceled() and sd_msg_thread_done inside
1421 loop starting the message thread to avoid a race condition.
1423 kes Remove rl_catch_signal from console.c as it conflicted
1424 with the header definition. Fixes bug #765.
1425 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1427 kes Clarify some stored/acquire messages to indicate if the
1428 problem is with read or append.
1430 kes Fix memory leak with storage ids in cats/sql_get.c
1431 kes Terminate watchdog earlier to avoid reference to released
1432 memory -- reported by Jason Austin.
1433 kes Move closing the database from jobq.c to the director daemon
1434 termination routine. This fixes memory leaks for shadow jobs
1435 (i.e. migration jobs).
1436 kes Free up the unique jobid chain items in migrate.c. This fixes
1437 a memory leak problem.
1438 kes Convert some ugly looking for statements to use foreach_alist
1439 in findlib/find.c. This will facilitate converting the structures
1440 to use dlist (for large include/exclude lists).
1441 kes Fix a bug in the btree.c and btree.h routines, then rename them
1442 rblist and add them to be built in src/lib. Include some new
1443 methods written by Rudolf Cejka that make the code more readable
1444 (hides some of the ugly casting).
1445 kes Add set_next() and set_prev() methods which make the code much more
1446 readable. Also add a new dlistString class that facilitates storing
1447 strings in dlists. To be used in the large include/exclude lists.
1448 kes Make some trivial modifications to lib/tree.h that use rblist
1449 rather than dlist for storing the tree links. This was suggested
1450 by Rudolf Cejka. The result of this is that the restore tree now
1451 uses red-black binary trees rather than simple linked lists. This
1452 should give rather dramatic speed improvements for directories
1453 contining large numbers of directories/files (more than 10000).
1455 kes Fix maxruntime bug #621.
1457 ebl Implement the include JobID in spool file name project.
1458 kes Reorder projects file in order determined by Jan 2007 vote.
1459 kes Implement item #12 on project list -- quick release of FD by
1461 kes Fix open of SQLite3 db where user does not have write permission
1462 so that DIR does not crash. Fixes bug #761.
1464 kes Add back missing @ in Win32 Makefile.
1465 kes Change 'Device not configured to autolabel' from INFO
1467 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1468 which should restart an indefinite # of times.
1469 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1470 other DIR specifications.
1472 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1473 Fix path quoting in SQLite scripts.
1474 Fix problems with SHGetFolderPath.
1476 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1478 kes Fix Job restart on error bug that promotes an Inc to a Full
1479 backup. This should fix bug #755.
1480 kes Add qt-console and first cut of code.
1484 kes Fix Bacula->Documentation link on Win32 to point to index.html
1485 instead of bacula.html. Fixed bug #750.
1486 kes Return JobId in db_get_job_record() when JobId==0. This should
1488 kes Do not release source pointers when restarting a failed job.
1490 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1491 This *should* fix bug #747.
1492 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1495 kes Modify USTORE constructor to set an empty store_source string,
1496 and don't copy the store_source string in a cancel. Hopefully
1497 this will fix Arno's seg fault, bug #744.
1498 kes Add back code to disable conio in configure. Fixes bug #743.
1499 kes Correct the Options scanner in the FD to correctly handle
1500 SHA1 option, which was eating the next option. Reported by
1502 kes Add code to indicate when the SD is spooling, spool wait, and
1503 despooling as requested by Alan Brown.
1505 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob