1 Technical notes on version 2.3
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
20 Improved status commands for Bat
21 Spooling/despooling status
22 Implement ftruncate for NFS devices
23 Add long term statistics job table
28 ebl Implement first cut of accurate backup with hash disk.
30 kes Force unload of volume when wrong volume mounted in SD.
32 kes Fix bat seg fault at termination.
33 kes Add Bacula generated version to bat about box.
36 kes Experiment with allowing multiple read jobs.
37 kes Move final volume swapping code to DCR method and
38 call it from acquire_for_read().
39 kes When wrong volume is mounted during read, unload_autochanger.
41 kes Integrate the libdbi changes from Joao Henrique Freitas
43 kes Stop searching for Volumes in SD askdir if DIR returns the
44 same volume name twice in a row.
45 kes Close bat console windows first to eliminate error message
48 kes Tweak the swap Volume from one drive to another code so that
50 kes Resolve several problems with recycling that broke the new
51 code (these problems are in 2.2.9 as well).
52 kes Remove the volume lock when calling the sysop code.
53 kes Don't mark a reserved volume with no writers as unused otherwise
56 kes Rework class structures for VOLRES, DCR, and DEVICE to make
57 the method names a bit more logical, and for more logically
58 handling the responsibilities.
60 kes Remove redundant code in terminating the scheduler that just
61 causes a seg fault in many cases.
62 kes Cleanup releasing a volume and make it a DCR method.
63 kes Improve algorithm for detecting pre-reserved volume and
66 kes Tweak volume swapping code so it works.
67 kes Correct name overloading in mount.c
68 kes Replace released flag in VOLRES with reserved and add access
69 methods for the VOLRES class.
70 kes Prevent volume from being released while being swapped.
71 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
73 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
75 kes Refactor parts of stored/mount.c
77 ebl Add sanity checks for VolWriteTime and VolReadTime
78 ebl Take care of bad clock changes while computing VolWriteTime
79 and VolReadTime. This should fix or limit #1066
80 kes Correct error string numbers in dird/catreq.c
81 kes Restructure reserving, acquiring, and mounting volumes. Calls to
82 autochanger are deferred for mount.c -- simplifes the code.
84 kes Do not prune any running job. It just fails the job.
85 kes Lock the volumes when changing dev->reserved_device and marking
86 the volume unused otherwise the device can get reserved by
87 another job before the volume is released, thus blocking it.
89 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
90 kes Fix bug #1063, reuse of freed ptr in list nextvol.
91 kes Release regex compile buffer in filed/job.c
92 kes Add proper type of const char in sql_create.c
93 kes Turn off debug in daemon termination routines
94 kes Move free_volume_list() before devices are freed in stored.c
95 kes Fix reference to uninitalized stack variables in bregex.c.
96 This should correct bug #1067.
98 kes Fix possible seg fault in SD when freeing a volume entry.
100 kes Implement unload_dev() before swap device.
101 ebl Add statistics prunning with option and menu
102 kes Separate unload_dev() from unload_other_device() in autochanger.c
104 kes Apply patch from bug #1069 that corrects spurious error messages
105 when ACLs enabled on SGI but no ACL exists.
106 ebl Fix small segfault in bacula-sd when debug level is 500
107 kes Modify run_program() and run_program_full_output() to use
108 call by reference for the results string. This corrects a long
109 standing problem where the address of the string may be changed
110 in the subroutine but not in the calling program.
112 kes Re-enable code to remember last volume mounted on a non-tape
114 kes Add patch supplied in bug #1068 that fixes a SD crash when using
115 a Virtual autochanger.
116 kes Generate correct JobMedia records during spooling/despooling when
117 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
118 <tih@hamartun.priv.no> for excellent analysis and testing.
120 kes Tweak hash algorithm for htable using Martin Simmons idea
121 for doing a circular shift.
122 kes Remember what volume is in VTLs (previously turned off for
124 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
125 pointed out some problems in creating JobMedia records during
126 spooling with concurrent jobs. Fix the problem by updating the
127 start file position before despooling and generate a jobmedia
128 record at the end of despooling.
130 kes Fix handling of JobMedia records during spooling and when a
131 Volume is changed without actually writing data to the Volume.
133 kes Rework certain SD locking based on gdb tracebacks of deadlocks
134 sent by Eric. This code now uses only the volume_lock() rather
135 than the reservations lock when at EOM and acquiring a new
137 kes Ensure only one exit point in several subroutines.
139 kes Implement bsock code to permit locking. Use the new code in Verify
140 in the FD to prevent the heartbeat thread from disrupting the Verify
141 data sent to the Dir.
142 kes Modify SD locking to eliminate locking the reservations system from
143 outside the system. Use the volume lock when getting media data
144 and reserving a new volume at end of media.
145 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
146 when SD starts are not locked into place.
148 kes Fix error compiling runscript code on 64 bit machines.
149 kes Tweak Win32 mount point code.
150 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
151 cleared giving bad file estimate).
152 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
155 kes Keep Schedule run lists in order as suggested by
158 kes Implement autostart scripts for Debian.
159 ebl Implement upgrade catalog scripts.
161 ebl Apply jobstat patch for long term statistics. Have to implement
162 purge stats command and upgrade scripts.
163 kes Fix mtx-changer.in for broken Debian mt program.
165 kes Fix large number of JobMedia records reported by Eric Bollengier.
167 kes Apply doc fix from bug #1062.
168 kes Resolve crash and improper restore wx-console Win32 restore
169 GUI. Fixes bug #1065.
170 kes Update Win32 wxWidgets to latest version.
171 kes Attempt to do correct handling of Win32 mount points. Should
173 kes Fix Win32 FD backup/restore memory leak due to improper termination
174 of BackupRead/Write. This fixes bug# 1038.
176 ebl Reduce memory usage for accurate backup, working only with ctime
177 and mtime. (not all Lstat field)
178 About 40MB for my linux system (400.000 files)
180 kes Add dcr->reserved_volume flag that allows us to release a volume
181 even if it is not vol->released. This allows maxvol2 to work when
182 Volumes expire and we are already writing to the device (i.e. a
183 volume is pulled out from under us by another job terminating after
184 we reserve the drive).
186 ebl Permit multiple command/console per runscript definition.
187 RunScript { command = /bin/true ; command = /bin/false ... }
188 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
189 (restart an application) just after the VSS snapshot on windows.
190 kes Don't zap dcr values during release_volume() as they might
191 have the next Volume to be mounted.
192 kes Fix AIX prototype.
194 kes Second cut of drive switching during backup.
197 kes Update Win32 version of wxWidgets to most recent version.
198 kes Tweak Copy job details.
199 kes Rework dir_find_next_appendable_volume to make a bit more effort
200 to find a suitable volume before giving up.
202 kes Make ask_sysop_to_create... to return if waken from wait.
203 This helps get out of blocked conditions.
204 kes Experimental implementation of switch_device in reservations.
205 kes Implement FD version to allow easier protocol changes.
206 kes Add Plugin Options string -- not yet passed to FD.
207 kes Implement PluginOptions ACL.
209 kes Attempt to correct problems with restores with autochangers and
210 use counts going negative
211 kes Rework SD status command and implement API for bat. Implements
212 header, runing waitreservation, devices, volumes, spooling,
213 and terminated status keywords.
214 .status storage=xxx <keyword>
215 kes Clarify TLS error message by adding double quotes around name.
216 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
217 kes Pass jcr to tls routines so debug messages can be handled better.
218 kes Rework jobq resource allocation code, and possibly fix a bug
219 that caused reference counts to get out of sync.
221 kes Rename fd/dir plugin to use Bacula standard underscore.
222 kes Plugin work -- bring dir up to fd level.
223 kes Start implementation of VTL code
224 kes Fix Win32 build after adding new cats subroutine.
226 kes First cut at Duplicate Job implementation.
228 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
229 kes Start PluginOptions string, and refactor a bit of ua_run.c
230 ebl Apply Allan patch that permit to reset recyclepool.
232 kes Test patch -- possible fix or improvement for bug #1053
233 kes Refactor FD and SD status commands to permit new API code in
234 SD, and to fix Win32 build.
235 kes Win32 build is now working.
237 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
238 some ideas in patch from Scott Bailey.
239 kes Begin implementation of duplicate Job control.
240 kes Fix some of Win32 build after recent additions.
241 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
242 which causes the FD to detect whether or not the OS has the
243 honor no dump bit (*BSD systems), and if so, to skip backing up
244 any file with this bit set. The feature is enabled by setting
245 'honor no dump flag = yes' in the Options section of a FileSet.
247 kes Correct po warning message with datarootdir
248 kes Implement more code in dird.c to put configuration parsing in
249 a class rather than use globals.
250 kes Restructure SD status command for implementation of bat API
253 kes Suppress incorrect 'Will not descend from x into y' messages.
254 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
255 daemon globals used by parser.
256 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
258 kes Fix free of plugin_list when none exists.
260 ebl Apply accurate project patch.
262 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
263 on non-mempool object)
264 kes First cut of converting FD .status to work with bat API.
266 .status client=XXX header
267 .status client=XXX running
268 .status client=XXX terminated
269 kes Implement first cut of Copy Job.
270 kes Implement Catalog in Pool resource. It overrides catalog specified
271 in the Client resource.
273 kes Apply patch (with some difficulties) from Joao Henrique Freitas
274 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
276 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
277 ftruncate() actually works. In the case of some (cheap) NAS devices,
278 it does not, and so recycling NAS Volumes does not work. The code
279 simply unlink()s the file, then recreates it. This fixes bug #1011.
281 kes First incomplete cut of big malloc blocks for htable.
282 kes Tweak plugin code.
284 kes Plugin debug code + tweak a couple bat dialog layouts
286 kes Fix creating first JobMedia record during Migration to include
287 proper index. This caused slow restores of migrated jobs.
288 kes Temp fix to plugin name file_index.
289 kes Bacula backed up and restored a MySQL database.
291 kes Implement plugin restore.
292 kes Implement parsing of db_driver to give db_type index.
294 kes First cut of plugin restore code.
295 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
296 and do not strip paths on symbolic links.
297 kes Set catalog backup database and user name from values specified on
298 the ./configure line.
299 ebl Fix #1031 about wrong pool source information in job report.
302 kes Remove a redundant jcr argument to find_files, match_files, and
304 kes Implement '.status dir header|scheduled|running|terminated' that
305 prints the requested status section. With the exception of the
306 header, the other reports have fields separated by tabs (\t).
308 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
309 a resource embedded run command to find a since time if no explicit
310 since time was supplied on the command line.
311 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
312 that updates the state file at job termination time in addition to
313 when the daemon terminates.
315 kes First version where a plugin did a backup.
316 bpipe-fd.so created a backup file, wrote a test
317 string to it, and Bacua could restore this fabricated file.
319 kes Implement DB Driver = string for the DBI driver.
320 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
321 kes First cut of code for loading Win32 plugin dlls. Implement
322 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
323 and implement a dlfcn.h file based on opengroup's definitions of
326 kes First cut plugin directives.
328 kes Apply patch from bug #1049 to prevent stripping the path on a
330 kes Attempt to fix bug #1047 where stripping a path corrupts the
331 heap. Waiting for feedback.
332 kes Correct the Mount message not to suggest labeling a new tape
333 when doing a restore. Submitted by email by John Stoffel.
334 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
335 FD by using casting. Reported in bug #1042.
337 kes A bit of crypto cleanup. More later.
339 Release Version 2.2.8
341 kes Apply patch from Martin to correct bug #1040, bscan sets existing
343 kes Fixed important spelling error in doc -- bug #1045.
345 ebl Fix bextract to be able to extract non-portable Win32 data to
347 kes Move initialization of read/write res lock earlier in the code.
348 This fixes the crash with a null conf file. This fixes bug
350 kes Redefine CURES in lib/parse_conf to be URES and move it all
351 into lib/parse_conf.c -- this responds to bug #1042, but does
352 not fix it. The fix is not to compile with FORTIFY_SOURCE.
353 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
354 the trunk SVN. I don't think this was reported as a bug.
356 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
358 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
360 kes Add DataDespooling and DataCommitting status (committing is
361 the last despooling).
362 kes Finish implementation of new reservations code noted below.
364 kes Fix bsnprintf for float point numbers. I broke recently when
365 parameterizing some variables. This fixes bug #1036.
366 kes Undo recent reservations changes ... will apply them later
367 when they work better.
369 ebl Fixes #1034 which cause mysql to hang the connection after 8h
370 ebl Change default statistics target of filename.name and path.path
371 fields for PostgreSQL. This speeds lookup by indexes. Thanks
373 kes A few more tweaks to new reservation code. Make sure to clear
374 vol released flag when retaking volume. When reading label and
375 label is bad mark volume unused. When recycling, mark volume
376 unused so it can be renamed.
378 kes Fix reserve_volume() so it doesn't release a volume in use
379 (i.e. a volume entry not marked released). This should be
380 the last part needed to fix bug #1018.
382 kes Move Heartbeat documentation from Job to Director resource.
383 This fixes bug #1033.
385 kes Fix existing switch drive SD code to call autochanger to release
386 any old volume. This must be done to keep the autochanger from
387 releasing subsequently newly reserved volumes in doing a close().
388 This should fix bug #1018.
389 kes Fail if attempting to get console input in batch mode. This
390 should help fail RunScript console commands that are incomplete.
391 kes First cut implementing switch_drive() in SD (not actually called).
393 kes Implement first cut running console commands in a RunScript.
395 ebl Fixes bug #1028 where 'Selection Type' option was not usable
397 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
400 Release Version 2.2.7
402 kes Add new free_tls() entry point so that Win32 builds.
403 kes Fix compile warning in src/lib/util.c
404 kes Fix entry point for edit_job_codes() so that Win32 builds.
405 kes Fix seg fault Frank Sweetser reports in regression testing
406 on his systems. The problem was that the original author of
407 bsnprintf.c did not take into account the side effects of
408 using ++x in the argument to a #define.
409 kes Make SD protocol backward compatible with version 2.2.x.
411 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
412 because Bacula no longer restores sockets.
413 ebl Always use ignorecase fileset option on win32 FD.
415 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
416 that implements double quoting include names in conf files,
417 and also allows piping input by having the first character
418 be a vertical bar (|).
419 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
420 that implement %f in RunScripts to pass the FileSet name.
421 kes Skip leading | when lex input comes from a pipe as suggested
422 by Michael Stapelberg <michael@stapelberg.de>.
424 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
425 Nerijus Baliunas <nerijus@users.sourceforge.net>
427 kes Implement Plugin Directory and plugin events.
429 kes Implement a security enhancement: TLS authentication but no
430 encryption. Enabled by setting 'TLS Authentication = yes'.
431 Note when this is on, TLS encryption is turned OFF!
433 kes This patch corrects a problem where the maximum concurrent storage
434 jobs counter gets out of sync during restore jobs causing jobs to
435 'wait on max Storage jobs'. This patch fixes bug #1009.
437 kes This patch fixes bcopy so that it produces correct Volumes.
439 kes This patch eliminates spurious output to the console during a VerifyVolume
440 job that contains encrypted data. It fixes bug #1024.
442 kes This patch prevents the 'status dir' command from trying to use a scratch
443 volume and possibly moving it from one pool to another. This patch fixes
446 kes Add new include to postgresql.c suggested by Marc Cousins so
447 that it compiles correctly with pgre version 8.3.
449 kes Fix --archivedir addition to configure. Replace it with
450 --with-archivedir in configure.in This fixes the regression
452 kes This patch fixes bug #1012 where the job is canceled because
453 of Max Run Time exceeded when the job has not yet started.
455 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
456 one 'part' to write. Instead of each part being stored on disk,
457 written to DVD, then deleted from disk, all parts are written to disk,
458 and only the last is written and deleted from disk.
459 kes This patch fixes the status command to include the formating string for
460 JS_AttrInsterting. It fixes bug #1021.
461 kes This patch should fix the Mac OS X build problem on the latest
462 Darwin, where sys/types.h was not included correctly (apparently
463 due to a change in the Mac headers). The solution was to explicitly
464 ensure that it is defined for the ./configure.
465 This patch also has a rebuild of configure that includes the Debian
466 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
467 kes This patch should ensure that queued messages to the console are
468 displayed as soon as possible. It should fix bug 1007, but has been
469 reported not to work.
471 kes This patch fixes the infinite loop when trying to increase the
472 maximum number of volumes in a Pool during the add command.
473 This patch fixes bug #1008.
475 Release Version 2.2.6
477 db Remove extra data on estimate command in joblist for bat.
479 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
480 really change anything, but is the beginning of doing it *right*.
481 To do it completely right the LastWritten date must be passed to
482 the SD, but it is not yet done.
483 kes Minor tweaks to some bat restore SQL.
484 kes This patch fixes bug #1003 where putting the message output from
485 a Verify job into the catalog results in a recursive loop. The problem
486 seems to show up only with postgresql (to be verified).
487 kes Correct %x to %p in postgresql debug statement.
489 kes Fix bug #942 where lots of emails where generated when the heartbeat
490 interval was low and Bacula wanted a different tape from the one in
493 ebl Add new SD despooling attributes and Dir inserting attributes
494 job status codes in the catalog (Status table).
496 ebl Use qmake-qt4 instead of qmake when available (debian system).
498 kes Add a security warning to src/cats/make_catalog_backup.in indicating
499 that passing the password via the command line (arg 3) is insecure.
500 This responds to bug #990 (it doesn't fix it).
502 kes Set default debug_level to zero. This corrects bugs #991 and #993.
503 kes Fix a crash in bat when it cannot connect to the Director for example
504 if the Director is not running.
505 kes Remove redundant INDEX (JobId) from File table in the trunk.
507 kes Make explicit exception to GPL in LICENSE to permit linking
508 the Win32 FD with Microsoft VSS code.
509 kes Apply the Solaris package patch from
510 Masopust, Christian <christian.masopust@siemens.com>
511 kes Apply the patch to optionally add a timestamp in the debug output
512 submitted by Mariusz Czulada <manieq@wp.eu>.
514 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
515 backend (sql_strerror). Fixes bug #989
517 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
518 It applied with no problems.
519 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
521 kes Redirect stderror to stdin on mt status command in mtx-changer.in
522 since the status is returned on stderr on Solaris.
523 kes Activate Close button on tray-monitor window. This fixes
525 kes Check for NULL item in parse_conf.c before calling it. In the
526 case of Device, there is no item and this caused a seg fault when
527 Device appears in the conf file.
528 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
529 avoids pulling in config.h multiple times in some new code.
531 kes Fix spurious warning message printed when creating a volume with
532 a LabelFormat. This fixes bug #976.
534 Release Version 2.2.5
536 kes Add JobId in place of Job name in all the Jmsg() output.
537 kes Correct the APP_DESC for the Win32 storage service (remove an e).
539 kes Make maxvol-test and new more strict maxvol2-test work.
540 kes Print JobId in all Jmsg() job output.
542 kes Add new SD despooling attributes and Dir inserting attributes
543 job status codes. This fixes bug 961.
544 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
546 kes Fix doc issue. This fixes bug #963.
547 kes Fix listing performance problems in bat. Pointed out by
549 kes Remove old debug code.
550 kes Fix bat code that tests for Win32. This should fix bug #968
551 kes Query 5 list wrong Vol after migration. This fixes bug #960
553 ebl Fix #969 where user can't change Replace option in restore menu.
555 kes Save jcr in thread specific data (tsd) for each thread.
556 kes Make Dmsg() print JobId as -%u.
557 kes Make Jmsg, Emsg, and others automatically pickup the jobid
558 for the thread if it exists.
559 kes Remove old reservation debug jid code.
560 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
561 ebl Add an option that permit to specify spool size in job
562 definition. (Applying patches/testing/spoolsize_per_job.patch).
563 You must upgrade SD and DIR at the same time.
564 dvl Add new configuration item --archivedir
565 dvl Adjust regression tests to use tmp not /tmp. This will allow
566 multiple concurrent runs of the regression tests.
568 kes Fix race condition that drops final block written to volume.
569 This happens in rare cases with multiple simultaneous jobs
570 when the Volume fills. This fixes bug #964. May be related
571 to bug #935 and possibly #903.
572 kes Eliminate more strerror() and replace with bstrerror().
573 kes Remove BSD getopt and replace with unrestricted IBM version.
574 kes Fix Win32 build for changed calling sequences.
575 kes More tweaks to the mount volume routines to get everything
576 right. Changed variable name from find to have_vol, which is
577 much easier to understand.
578 kes Enhance btimer debug code.
580 kes Fix FD->SD authorization failure, which was due to spurious
581 wakeups from a pthread_cond_timedwait(). Simply check the
582 predicate before continuing. This fixes bug #953.
583 kes Add const char where needed (more to do). Remove temp debug code.
585 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
586 kes Don't overwrite error message in check_tables_version.
588 kes Unlock batch insert tables with same calls used elsewhere.
589 kes Allow starting 59 jobs a second.
590 kes Make SD session key more random.
591 kes Add retry for SQLite opening db if it fails. Probably helps
593 kes Suppress extra error messages during batch insert failure.
595 kes Add jcr to timer packets so if killed message can be sent to job.
596 kes Add JobId to all Dmsg() output.
597 kes Put some FD auth code on dbglvl rather than fixed.
598 kes Return insert attributes error message in db msg buffer to avoid
599 false error messages. Helps fix bug #966.
600 kes Separate batch init error messages. Probably helps fix bug #966.
601 kes Make SD code that contructs attribute insert check string lengths
603 kes If Dir gets an error during inserting attributes, cancel SD.
604 This reduces unnecessary error messages.
606 kes Correct search boolean for getting Volume info
607 ebl Cleanup batch insert code. Probably fixes bug #965.
608 kes Back out one small change to the reservation system (reserving a volume).
609 kes Rework how a Volume is mounted. It is now much more intelligent and
610 will always attempt to use any mounted volume if possible and reduces
611 calls to the Director asking about volumes.
613 kes Turn off some code when batch insert not enabled.
614 kes Edit FD name in connect error messages.
615 kes Rework the reservation system to take into account that the Director
616 might give us a Volume that is different from the current one being
617 used, and to ensure that we don't exceed Maximum Volume Jobs.
618 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
619 fatal error with multiple jobs running'
620 kes Add more debug code in reservation system.
621 kes Implement maxvol-test to check bug #947.
623 kes Add code to handle tray monitor separated from Win32 FD.
624 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
626 kes Add missed return in fixing verify bug -- trunk only.
627 ebl Fix a command parser issue causing a director segfault.
628 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
630 kes Increase the max block size to 4MB fixes bug #957.
631 kes ERABT if user sets min block size > max block size. Fixes bug #956.
632 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
633 is not properly mounted (recognized) during a poll.
634 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
635 Job that has differences reports Verify OK.
636 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
638 ebl Add an option to operate on all pools with update vol parameters.
639 This complete the project 20. Patch from Nigel Stepp.
640 ebl Add history support to bconsole when using readline.
641 Using Ctrl-D to exit doesn't update .bconsole_history
642 kes Modify new volume algorithm to use max MediaId for generating next
643 volume number rather than the count of Volumes. This should essentially
644 eliminate the failure rate if some volumes were deleted. Bug #921.
645 kes Begin implemention of Optimize Job Scheduling.
646 kes Implement restore callback that Dirk and I agreed on for bat
647 restore. This fixes bug #928. Restore of backup of zero files fails.
648 kes Fix SQL Catalog logging which broke with new db_escape_string
651 Release Version 2.2.4
653 kes Fix bacula_cats.def for new db_escape_string().
654 kes Increase size of name string when FD making connection to SD.
655 May fix bug #953. FD->SD connection failure.
657 kes Add code to help Dan debug 2drive-incremental-2disk test.
658 kes Add code to try to fix bug #908.
659 kes Add waits to multiple exit detection code to try to force pid
660 file to always be deleted.
661 kes Restore good dev.tar.gz to rescue set appropriate binary property.
663 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
664 trying to switch drives by checking for blocking before unblocking.
666 kes Cancel storage daemon in all cases where FD reports error. This
667 should fix virtually all cases of bug #920.
668 kes Fix db_escape_string() for MySQL which did not compile.
670 kes Fix error message that was clobbered when Dir tells SD it does not
671 have write permission on Volume. This should fix a minor point
672 in bug #942, but not the main problem.
673 kes Add code to cancel job in SD if FD connection fails. This should
675 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
676 dvl Pass jcr and db into db_escape_string() to enable better escaping
678 kes Fix migration code to get correct Volume name with multiple volumes
679 by skipping |. Fixes bug #936.
680 kes Implement patch supplied by Landon to fix bug #944 where using
681 TLS with bconsole uses 99+% of the CPU.
682 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
684 kes Move patches into patches directory.
686 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
689 ebl Using 'm' in bconsole will show messages like before,
690 and not memory usage.
691 kes Fix bug #935, and probably also bug #903 where files were not
692 restored. MediaId was not properly set in JobMedia record after
695 kes Suppress chown and chmod error messages if the FD is not running
698 kes Apply Martin Simmons' patch that should turn off the new API usage
699 when batch insert is turned off allowing building on older
701 kes Add ./configure search in qwt-qt4 for qwt package
703 kes Bacula is now free of 3rd party GPL copyrighted code!
705 kes Add guid_to_name.c/h which replace idcache.
706 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
708 ebl Detect if new PosgreSQL batch insert API is present.
709 kes Correct incorrect mempool call causing Director crash. Occurs on
710 systems without va_copy().
711 sb Update spec files for 2.2.1 release
713 kes Fix memory pool call in ua_output.c. bug #934.
714 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
715 Add test program to fnmatch.c
717 kes Integrate patch to README.vc8 from
718 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
719 edit it to get it into Unix patch format.
720 kes Implement mkpath.c to replace old FSF makepath.c
722 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
724 Release Version 2.2.1
726 kes Update POTFILES.in
727 kes Cleanup a few underquoted AC_DEFUNs in configure
728 kes Apply patch from Martin Simmons that adds a test for va_copy to
731 kes Fix bug #921 by increasing the number of tries to create a new volume
733 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
734 can be called multiple times. Implement a version for machines
735 without va_copy() that gets a big buffer.
737 kes Integrate more portable zone offset code into bsmtp.c
738 Submitted by Attila Fülöp.
740 kes Fix bad SD->FD return status reported by
741 (James Harper) <james.harper@bendigoit.com.au>
742 ebl Fix a bug in read_close_session which return random status
743 thanks to James Harper
745 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
746 and directory names during restore of single file/directories.
747 kes Add sanity checks to .sql command when string is empty. Hopefully
748 that will resolve Dirks Director crash.
750 kes Apply patch submitted by Martin Simmons that corrects a seg fault
751 in the bsmtp chat subroutine when debug is >= 10.
753 kes Fix Director crash when running bat SQL queries.
754 kes Add David's notes on Item 8: Copy pools.
756 kes Rework projects file to be current and ready for a vote.
757 kes Enhance lex scanner error message.
759 kes Tweak LICENSE file to mention BSD code.
760 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
761 if specified on the ./configure.
762 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
763 This class is intended to allow us to open a second bsock to the
764 Director while in the restore subdialog.
766 kes Fix configure to create bat Makefile before creating dependencies.
767 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
768 kes Add a tooltip to the tray monitor.
769 dvl Set the Director's PID file before dropping privs. This fixes
772 kes Update AUTHORs file
773 kes Increase the default max concurrent jobs to 20 in FD and SD to
774 correspond with the default .conf files.
775 kes Rewrite the Win32 service routines. This eliminates the 3 copies
776 some different, of the same file created by RN when porting the
778 kes Rearrange some of the Win32 directories and the placement of the files
780 kes Set DEVELOPER flag in version.h
782 ========================================================================
783 Release Version 2.2.0
785 kes Apply a second doc patch from Marc.
786 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
787 improves the tips section that discusses how to setup multiple
790 kes Update bat README file.
791 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
792 corrects a typo in the Recycle status check in db_find_next_volume().
793 This will probably fix a number of annoying problems with multiple
795 kes Modify most of dird/msgchan.c to use bsock class calls rather than
796 bnet calls -- no functionality change.
798 kes Modify the Verify output to specify if files are missing on
799 the Volume(s) or disk. Fixes confusion in bug #916.
800 kes When more than one Volume is read in a migration job, the last
801 Volume bytes reported are from the last read volume rather than
802 the last written volume. Fixed. This fixes bug #910.
803 kes Fix display of Recycle flag after update volume=foo recycle=yes.
804 It previously printed New Recyle flag is: no. This fixes bug
807 kes Correct seg fault when switching tape drives during restore.
808 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
809 be used until after 2.2.0 release.
811 kes Remove fnmatch() in SD that permitted wild card specifications.
814 kes Fix %g in filename returned by SQL for browse tree reported by
816 kes Fix configure so that it puts config.out in the cwd rather than
818 kes Attempt to fix the locking problem reported by Eric in bug #906.
819 kes Make berrno class to leave errno unchanged after constructor call.
820 kes Make bnet_server use the heap rather than the stack to allocate
821 its socket fd pointers to avoid a crash at termination. Problem
822 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
824 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
825 and putting it in depkgs-qt along with Qt4.3.
827 kes Rework code in acquire.c that switches drives for reading when
828 the Media Type does not match. This should fix bug #906
830 ebl Fix a director segfault during job setup #907
831 kes Correct seg fault in postgresql when first operation returns no
832 rows. Fixes Dirks File browser problem seg fault with bat.
834 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
835 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
838 kes Implement PopUp YES/NO dialog for bat.
840 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
842 kes Correct RunScript to terminate job in FD on failure.
843 kes Change abort_on_error and AbortJobOnError to fail_on_error
844 and FailJobOnError in RunScripts.
845 kes Minor tweaks of code formating in RunScripts, principally to
846 avoid depassing 80 columns.
848 kes Eliminate one #ifdef Win32 in bsmtp
849 kes Implement grow tool to grow a file for testing very large databases.
850 kes Add big-vol-test to test Bacula seeking with > 5GB.
853 kes Modify find_next_volume() to return all values in Media record.
854 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
858 kes Update Release notes
860 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
861 Warning, in previous beta version, all media get from scratch keep their
864 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
865 This should fix bug #842. Made a note to look at removing the temp
866 files at the end of the install.
867 kes Add ability to mount and unmount a file device providing it is
868 marked as being removable and has the appropriate mount and unmount
869 commands defined in the Device resource. This fixes bug #830.
870 kes When applying a storage override, release all previous storage
871 definitions rather than just prepending the new storage.
872 This should prevent a good deal of confusion.
874 kes Implement ./configure search for qwt libraries.
876 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
877 Win32 FD. This should fix bug #893.
878 kes Remove an unnecessary beep in Win32 init code.
879 kes Update copyright dates in Win32 executable about boxes.
880 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
881 code with a BSD getopt.c and getopt.h.
882 kes Remove sched.h from the Win32 compat directory -- not used.
883 kes Remove the Exit menu item from the Win32 tray monitor. If you really
884 need to shut it down, do it through the services panel or the command
886 kes Remove some inappropriate Bacula FSFE copyrights.
887 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
888 kes Fix regress config non-portable test as pointed out by
889 Florian Heigl <florian.heigl@gmail.com>
890 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
891 as pointed out by Florian Heigl <florian.heigl@gmail.com>
893 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
894 Reported by Frank Sweetser.
898 kes Fix client-only build.
899 kes Integrate client-only fixes for bsys (initgroups) and conio from
900 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
901 kes Make arguments to get_scratch_volume() in same order as other
903 kes Rework the prune_volumes() subroutine so that after purging and
904 no volume found in desired pool, it will check for a scratch
905 volume. This prevents recycling the whole scratch pool.
906 kes Add code to status storage to print boffset_t (largefile support).
908 kes Move qwt (Graphics libarary for Qt4) to depkgs.
909 kes You now need a --with-qwt=<dir> to be able to build bat.
910 kes Update src/win32/cats/bacula_cats.def to include the new
911 db_get_query_dbids() call on Win32.
913 kes Correct a problem when selecting a scratch volume and moving
914 it to another pool that lost some columns.
915 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
916 kes Enhance Autochanger error messages to include Volume and device name.
917 kes Rework prune_volumes() code to take account of InChanger flag,
918 and to handle recycling volumes going to the Scratch pool and
919 current pool because the RecyclePool directive.
920 kes Implement a better and more efficient db_get_query_dbids() to
921 handle creating and passing back a list of DBIds.
925 kes Start work on new more efficient DBId subroutine. First use
926 will be for recycling volume to Scratch inchanger.
927 kes Increase number of JobIds in pruning from 1000 to 10000.
928 This to be replaced by above routine.
929 kes Begin implementation of building Qt4 on Win32.
930 kes Correct typo in fix I added for bad TLS shutdown.
931 kes Pull 2.0.3 patches into patches directory.
932 kes Update Release notes. Include qt-console in line count.
933 kes Update Projects file.
935 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
936 bug in migration code where a job that spanned two volumes
939 kes Implement new BST_DESPOOLING blocked state. Change from locking
940 during despooling in SD to blocking. This means that other threads
941 can work with the device structure, in particular the reservations
942 system while despooling.
944 kes Fix return in reservation message queue that missed clearing
945 the jcr lock (implemented 26Jun07 below).
946 kes Rename a number of dev methods to make locking function names
948 kes Document locking in lock.c. Move lock structures to new file
951 kes Move reservations message lock to lock jcr only this
953 kes Move main SD locking code into lock.c (new file).
954 kes Update Win32 build to include lock.c
958 kes Dirk committed the qwt library code for drawing graphs in bat.
959 kes Tweak install of qwt so that it is integrated with ./configure.
961 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
962 out by Eric (my typo).
963 ebl Fix configure.in to get batch mode enable
964 kes Return correct string from authenticate.cpp in bat when connecting
966 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
967 spurious line drops when using TLS.
968 kes Do not file reparse points when restoring a file that already
971 kes Implement Windows reparse points -- similar to directories, but
972 we do not descend into it. This is a first cut. They seem to
973 be backed up, but restore is not yet tested.
974 kes Remove restore_blocking in tls code when shutting a socket to leave
975 it in blocking mode. Hopefully this will fix the encryption bug
976 reported by Frank Sweetser.
977 kes When opening a file for backup, tell the OS that we are going to
978 read it sequentially -- optimization.
979 kes Change variable names in authenticate_director() to not conflict
980 with member names in bat. Caused great confusion with compiler,
983 kes Queue openssl error messages in case of comm problem.
984 kes Do shutdown() call if socket terminated.
985 kes Remove some duplicated code in tls.c
986 kes Move more of the bsock member variables into private and access
988 kes Add Frank Sweetser's tls-test to the regression suite.
990 kes Add Swedish sv.po file
992 kes Don't print clock skew message in FD if less than 3 seconds diff.
993 kes Add a bit of VSS info to status client.
994 kes Implement a first cut of Vista VSS, using Win2003 code.
998 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
999 loaded tape but uses first drive).
1000 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1001 This was indeed a Win32 issue.
1003 kes Simplify search of autochanger for in-use Volume.
1004 kes Fix exit condition of check for in-use volume. kes Remove
1005 inappropriate my_postgresql_free_result() in db_close()
1007 kes Fix bad return in FD when encryption signature not found.
1008 Probably caused a crash.
1009 kes Inhibit missing encryption signature error messages for
1010 file types where no signature computed.
1011 kes Correct inverted check on autochanger in reservation system.
1012 kes Tweak debug code in autochanger reservation.
1014 kes Add some additional locking in the cats directory in subroutines
1015 that modify packet variables called from batch insert.
1016 kes Rework how dcrs are allocated. new_dcr() can now be called
1017 with an existing pointer, and it will simply clean it up.
1018 This allows the reservation system to test various different
1019 devices, and will permit easy device changes.
1020 kes A bunch of changes all over to handle new new_dcr() calling
1022 kes Work more on the Volume management in the SD. Remember Volumes
1023 for tape drives and for autochangers (even virtual disk changers).
1024 kes When looking at the Volume list to reserve a drive, handle
1025 autochanger names correctly by interating through the changer
1026 devices. Also call the Director to see if a Volume is suitable
1027 for the current job.
1028 kes Fix some bugs in bscan. Make sure all media records are written.
1029 Make sure that valid JobMedia records are written for disk files.
1030 Previously they were completely wrong.
1031 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1032 that the URLs don't change and so that the developers will all
1033 work off the same copy. Rebuild from scrach.
1034 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1036 Release: 2.1.18 beta
1038 kes Fix seg fault in FD from incorrect digest size.
1039 kes Fix argument to non-OpenSSL crypto.c subroutine.
1041 Release: 2.1.16 beta
1043 kes Remove a few malloc()s from the encryption code.
1044 kes Use the class calls to bsock in filed/backup.c and restore.c in
1045 place of the old bnet_xxx code.
1046 kes Implement code that does an on the fly calculation of the
1047 signing digest during restore of encrypted files. It makes
1048 a best guess at the algorithm, and if it is not correct, will
1049 then revert to the old code which reads the file after it is
1051 kes Implement at least one missing crypto stream in stream_to_ascii()
1052 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1053 #877 where a reload with bad syntax causes Dir to exit.
1055 Cut: 2.1.14 beta (not released)
1057 kes Do not free a volume on a tape drive until another volume is
1058 mounted and read, or the autochanger unloads the volume.
1059 This should help the SD re-use volumes that are already mounted,
1060 and should fix bug #886.
1061 kes Apply patch from user brettedgar that allows gnome2-console include
1062 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1063 kes Apply patch from Lucien Weller that fixes day of week calculation
1064 because of DST flag problem. Fixes bug #887.
1066 kes Move find_next_appendable_volume() to after acquiring a valid device
1067 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1069 kes Unable to reproduce bug 872. However added additional testing for
1071 kes Bug #874 resolved by documenting SQLite limitations.
1072 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1073 kes Bug #881 resolved by removing typo in mtx-changer script.
1074 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1075 approval. Added a link to the wiki on the web page, and implemented
1076 a backup from http://paramount.ind.wpi.edu
1078 kes Fix update allfrompool to pass pool name.
1080 kes Convert to pure GPL v2 license.
1081 kes Fix sscanf problems reported by Peter Buschman that caused
1082 a bus error on Solaris.
1083 kes Rework (simplify) the select prompt in bat.
1084 kes Move get_jobid_from_tid() into lib and create a
1086 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1087 should definitely fix the problem of lost error messages in the
1089 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1090 kes Eliminate tcpd.h from the project. Enclose the #include from the
1091 library with extern C ...
1092 kes Add print of signal name when a signal is trapped.
1094 Release: 2.1.12 beta
1096 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1098 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1099 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1100 makes SQLit3 run 30 times faster, though a bit less safe.
1101 kes Implement --with-batch-insert in configure and detection of thread
1102 safe libraries. It is on by default, but turned off if no thread
1103 safe library (e.g. SQLite 2) is available.
1105 kes Fix Bacula PostgreSQL buffer overruns.
1106 kes Do better checking for NULL results returned from PostgreSQL;
1107 implement retry for failed queries; clear results buffer after
1108 failed query. Hopefully this will correct the PostgreSQL failures.
1110 kes Implement algorithm to handle only one appendable volume with
1111 Prefer Mounted Volumes = no.
1112 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1113 returned from a query.
1114 kes Make volume lock recursive.
1115 kes Implement an additional volume reservation algorithm that
1116 starts by considering all reserved volumes then uses the
1117 old brute force algorithm of searching the resources to
1118 find a suitable device.
1119 kes Add new reservations debug code and refine the old code.
1120 kes Update the win32/dll/bacula.defs file.
1122 kes Tweak reservations algorithm to permit a few more cases, i.e.
1123 volume reserved, but on different drive, ...
1124 kes Enhance SD status to include Pool and Media Type for drive in a
1125 more readable format (a bit longer).
1126 kes Fix PostgreSQL double free.
1128 kes Minor refactoring of restore decryption code.
1129 kes Add code to smartall.c to detect double free of a buffer.
1131 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1132 so that bsmtp will create a correct email address (mailbox only).
1133 kes Modify 'memory' command so that the buffers are listed as 'In use'
1134 to avoid confusion with Orphaned buffers.
1135 kes I reworked the OpenSSL include/lib flags to be handled in
1136 the standard Bacula way, which should fix bug #863 concerning
1137 non-standard OpenSSL libraries.
1139 kes Implement Help Browser window for bat.
1140 kes Fix reload bug that reset StorageId to zero.
1142 kes Fix TLS #ifdefing when TLS turned off.
1143 kes Ensure that when labelling a tape with Slot=0 that InChanger
1145 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1147 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1148 add DISTINCT (required by PostgreSQL).
1149 kes Implement BSOCK authenticate_director() method. Eventually will
1150 authenicate all daemons.
1151 kes Move several more functions into the BSOCK class.
1153 kes Add code to tell the OS that we no longer need a cached
1154 file that we were reading. In findlib/bfile.c. Also,
1155 only cache files that we are reading. Thanks to
1156 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1157 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1158 kes Implement script to automatically generate cats and dll .def
1159 files for Win32 dll.
1160 kes Update README.mingw32 to include new .def file generation.
1161 kes Correct typo in UTF-8 error message as reported by:
1162 jhernandez <julianhernandez@gmail.com>
1163 kes Add additional sm_check() code on debug level 1.
1164 kes Set default debug level to 1.
1165 kes Trap SIGABRT in attempt to get traceback.
1167 kes Reduce bat connect timeout from 30 to 15 seconds.
1168 kes More restructuring and implementing BSOCK class in place of
1170 kes Remove a few unnecessary malloc() tests in crypto code.
1171 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1172 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1173 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1175 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1177 kes Fix Verify InitCatalog. The attributes were not pointing to the
1178 correct saved location.
1179 kes Implement message callback so that GUI is sure to get all
1180 daemon messages. Currently displayed in a dialog in bat.
1181 kes Ignore SIGUSR2 (Bacula timer) in bat.
1182 kes Apply regress patch from bug #859 to allow regress to work
1183 with Solaris compiler.
1185 kes Begin adding TLS support to bat.
1186 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1187 clean up lex.c and make it more readable.
1189 kes Move more bnet functions into the BSOCK class.
1190 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1191 kes Complete change of berrno strerror() method to bstrerror()
1193 Release: 2.1.10 beta
1195 kes Cleanup incorrect email addresses in bsmtp.
1196 kes Make bat display initial messages rather than discard them.
1198 kes First cut of adding .mod to the run command.
1199 kes Implement auto display of messages in bat.
1200 kes Enhanced preferences to allow all Bacula output to be
1203 kes Try to make bsmtp date routines more generic.
1204 kes Fixed bug #856 autochanger documentation.
1205 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1206 kes Add new cats entry point so Win32 builds.
1208 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1210 kes Do better checking for the MySQL 64 bit libraries looking for both
1211 .a and .so libraries.
1212 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1213 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1214 kes Require the thread safe version of MySQL during configure. Thanks
1215 to Andre Noll for pointing this out.
1216 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1217 continuing in migration code.
1218 kes Apply implementation of tray-monitor font derived from gnome-console
1219 submitted by Andreas Piesk <a.piesk@gmx.net>
1221 kes Eliminate important memory loss in SQLite
1222 kes Fixed the batch insert MySQL thread specific data that was not
1223 being freed. See cats/mysql.c:db_thread_cleanup().
1224 kes Fix restore before command.
1225 kes Convert old hdr.name to name() in a few places.
1226 kes Implement update jobid command.
1227 kes Return all time_t dates in db_get_job_record()
1228 kes Stop watchdog in SD earlier.
1229 kes Put Pool just after Storage in please mount message.
1230 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1233 kes Update the po files.
1234 kes Fix Verify InitCatalog by making it cache attributes.
1236 kes Change name bacula-bat to bat for man 1 page to correspond to
1238 kes Check for client and store NULL pointers in status command. This
1240 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1241 kes Fix sign extended editing of %p.
1242 kes Clean out a little old #ifdefing in cats/mysql.c
1244 kes If time diff between DIR and FD is more than 600 seconds convert
1245 INFO message to WARNING.
1246 kes Implement heap size display in status for all daemons.
1247 kes Attempt to fix MySQL db open memory loss (not successfull).
1248 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1249 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1250 Query. This looks like a MySQL but but by doing extra releases,
1251 the memory goes away. This should fix bug #847.
1253 kes When backup fails, cancel SD before waiting for sd termination.
1254 kes If SD is waiting for FD to connect during cancel, wake up the
1256 kes Fix fsf code so that errno is correctly reported.
1257 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1259 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1260 so that Bacula doesn't later stumble into a seg fault.
1261 kes Use the term Restore Client in the restore Job report.
1262 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1263 the original job's FileSetId.
1264 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1265 spooling in migration jobs. Not yet tested.
1266 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1267 reading conf file from a pipe. However, do it with open_bpipe()
1268 rather than popen. Not yet tested.
1270 kes Fix an ugly bug where the VolCatBytes were getting updated
1272 kes Implement bconsole memory command that prints current memory
1273 usage, plus smartalloc dump.
1274 kes Clarify some error messages in backup, admin, and migrate.
1275 kes Shrink label dialog to smaller size.
1276 kes Invert Cancel OK buttons on restore to be OK Cancel.
1277 kes More strerror() to bstrerror() conversions.
1279 kes Start implementing bstrerror() in place of strerror().
1280 kes Stripping path -- seems to work.
1282 kes Prevent door and port files from being restored (mostly
1284 kes Free an unreleased buffer in compat code.
1285 kes Change console Job name from *Console* to -Console- to eliminate
1286 Win32 filename problems. Put Win32 path separator when creating
1287 Console file. This fixes bug #846.
1288 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1290 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1292 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1293 to force Win32 error message.
1295 kes First cut strip path. The data should be passed to the FD,
1296 but nothing is done with it yet.
1297 kes Enhance the digest and signature routines in the crypto
1298 library to accept a JCR and to use it to print error messages
1299 so that they will go in the Job report rather than the daemon's
1301 kes Simplify some of the verify signature code.
1302 kes Simplify a few of the alternative returns in the signature
1305 ebl Use only POSIX regex instead of GNU regex in breg.c for
1306 File relocation. It fix broken freebsd compilation.
1307 kes Convert all other Dir files to use new ua class message
1309 kes Tentative fix for missing digest signature in bug 807.
1310 kes Correct handle problem in new win32_ftruncate routine.
1311 kes Convert ua_purge.c and ua_update.c to use new ua class
1312 message routines for bat.
1314 kes Correct incorrect installation of LICENSE in Win32 installer.
1315 kes Display LICENSE at the beginning of the Win32 install.
1316 kes Attempt to correct the need for the png files to be installed
1318 kes Reapply my bat.conf install script in qt-console. I think I
1319 editted bat.pro instead of bat.pro.in and it was lost.
1320 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1321 the /var/lock/subsys for subsysdir. Also corrects typos in the
1324 kes First cut update job.
1325 kes Correct configure to include qmake of src/qt-console directory.
1327 kes Make restore job yes/mod/no print in one command so GUI works.
1328 kes First cut implementing backup and restore client.
1329 kes Correct editing in Verify output that caused a seg fault.
1331 kes Insure that bat.conf is not overwritten during installation.
1332 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1333 while I was implementing migration in March 2006 !
1335 ebl Cleanup file relocation, using char *RegexWhere instead of
1336 char *where + bool where_use_regexp
1337 kes Update some manpages and add bat manpage.
1338 kes Make a first cut at converting bacula.spec.in for bwx-console
1340 kes Apply patch from John Goerzen to add hostname as fourth argument
1341 to make_catalog_backup script.
1342 kes Fix typos I introduced into bsmtp.c
1343 kes Make pm_strxxx() routines handle input of NULL pointer. This
1344 is to protect from NULL pointers returned from SQL databases.
1345 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1346 kes Add more debug to FIFO code -- fix fifo regression test.
1348 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1349 kes Add thread timer to bnet_connect() to break from OS if wait time
1352 kes Update Win32 build to include new files, new symbols, and
1354 kes Implement socket level heartbeat (tcp_keepidle)
1355 ebl Commit File relocation patch
1356 kes Make bat have 'make install' target.
1357 kes Warn during install if old gnome-console binary found.
1358 kes Warn during install if old wx-console binary found.
1359 kes Add -8 option to bsmtp command line to add content type utf-8.
1360 Fixes bug #809. (Character coding problem in bsmtp).
1361 kes If < is found in target (from, to, cc) then do not enclose the
1362 target in < > in bsmtp. Fixes bug #772 (malformed address).
1363 kes When printing certain items in dbcheck, stop after 300000.
1364 Fixes bug #822. (dbcheck loops).
1365 kes Incorrect status in Dir after waiting for mount with poll set.
1368 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1370 kes Print waiting to reserve a device every 5 mins.
1372 kes Don't call close_part in label.c if tape and relabel.
1373 kes Don't free volume if busy in close() -- should help with
1375 ebl Fix #824 RunScript bug (After script could be execute twice)
1376 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1377 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1378 Add a regression script to test RunScript
1380 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1383 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1384 deprecated. No additional bugs will be fixed, and they will be dropped
1385 in a future release (probably 2.4.0).
1386 kes Change name of wx-console to bwx-console to make it more Bacula
1388 kes Change the name of gnome-console to bgnome-console to make it
1391 kes Some time in March, a Feature Request with patch from Jorj Bauer
1392 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1394 The ability for the director to validate a Client (FD) CN against
1395 an arbitrary set of patterns rather than the hostname, with
1396 A new 'TLS Allowed CN' set of directives which are implemented
1397 in the Client resource. Then pattern matching is used in place
1398 of hostname matching against the Certificate's CN. As an example, we
1399 have certificates which (a) use a local CA, and (b) have a CN of the
1401 kes Add new/changed entry points to Win32 build
1402 kes Create unaccepted-projects for projects that are not accepted.
1403 kes Simplify locking in the reservations system.
1404 kes Add more debug code in reservations.
1405 kes Make sure error condition on reserving a volume is handled correctly.
1406 kes Correct handling of volume_in_use.
1407 kes Correct handling of initializing a device.
1408 kes Move handling of broadcasting releasing a device into release_device().
1409 kes Correct attaching dcr to dev so that it is only done if device
1410 is properly initiated.
1412 kes Locking debug level tweaks in SD.
1413 kes Tweak new Volume code.
1415 kes Add exec external-command [wait-seconds] to bconsole. This
1416 executes the external-command. Note! normally external-command
1417 should be enclosed in double quotes.
1418 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1419 it should normally be off in a production system.
1421 kes Implement die command for SD so that we can force it to dump.
1422 kes Implement SD lock debug code.
1423 kes Implement new algorithm for keeping Volume list in SD. It
1424 is now owned by the device.
1426 kes Implement new code for freeing in use volumes that should
1427 resolve if not all, some of the problems of multiple drive
1428 tape conflicts described in bug 801.
1430 kes Fix gui/bacula-web/images files in svn.
1431 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1433 ebl Fix a bug in batch mode (in string escape)
1434 kes Correct migration prune SQL typo that crept in in a
1435 recent 2.1.x change.
1437 kes Move bnet_despool() into class in bsock.c
1438 kes Modify job report to include director name and Build OS.
1439 kes Move drop root privilege and check_catalog() before fork.
1440 kes Add update database scripts (version 9 to 10) to updatedb directory.
1442 ebl Check size and age of each file after its backup to see if
1443 it has changed during backup, if 'checkfilechanges' is set.
1444 The FD will do an extra check (stat(2)) after
1445 each file backup. mtime, ctime and size are compared with
1446 'before backup' information. If time or size mismatch, an
1447 error message will be generated. You must upgrade FD to use it.
1449 kes Make database name and user configurable
1450 --with-db-name=xxx --with-db-user=xxx
1451 kes Add back database type to message.c for debugging.
1453 kes Implement dir_sql() which issues an SQL query.
1454 kes Modify bat medialist to use dir_sql() and do some minor C++
1455 formatting as well as eliminating a number of pointers, simplifing
1458 kes Fix some of the mtx-changer grep commands for tape label readers.
1459 kes Convert a number of bsendmsg into the appropriate send/warning/error
1460 message class calls.
1461 kes Suppress the using database message in the .sql command.
1462 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1464 kes Add context menu for floating a window.
1465 kes Some minor cleanup and name changes in qt-console
1466 kes Add doing mt setblk 0 in Win32 mtx-changer.
1467 kes Apply Martin's bug fix to move definition of ENODATA for
1469 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1470 sqlite2 and sqlite3.
1472 kes More pruning cleanup.
1473 kes Turn on wait_for_drive by default in mtx-changer.
1474 kes Turn on Batch insert code by default as it now passes regression.
1475 kes Add ./configure --enable-bat to enable building of Bat.
1476 No install yet though.
1478 kes Implement a new .sql command for bat.
1479 kes Implement code to turn off pruning in obtaining the next volume.
1480 Pruning is turned off for the status dir command, but turned on
1481 for SD requests and for the list nextvolume command.
1483 kes Correct Qmsg() that was not updated correctly when committing a
1484 previous change (probably the recent TLS patch).
1486 kes Write new subroutine is_volume_purged() that explicitly checks
1487 if the Volume is purged, and if so marks it as such. This should
1488 resolve problems reported about needing to mount twice to recycle
1490 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1491 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1492 amount of duplicated code.
1493 kes Do volume pruning only for the Media Type desired (reduces pruning time
1494 if multiple Media Types are in the same pool).
1495 kes Implement more detailed info in the Job report for the Bacula version
1497 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1499 ebl Add bbatch tool to bench database and insert mode.
1500 Fix sql quote stuff in batch mode
1501 Fix sql stuff for mysql
1503 kes Correct problems with am/pm scheduling. Fixes bug #808.
1504 kes Implement new prunning code that prunes up to 1000 jobs at
1505 the same time. The same technique can be applied to a number
1506 of other prune/purge subroutines.
1507 kes Add an insanity check when starting a new tape job to ensure
1508 that the tape position has not been changed. If so fail the
1510 kes Fix Win32 build for dlls to add the folllowing:
1511 src/lib/bsock.c -- new file with new entry points
1512 src/lib/dlist.c -- new entry points
1513 src/cats/sql_create.c -- new entry point
1514 src/cats/sql_cmds.c -- new DATA item exported
1516 ebl batch mode cleanup bscan-test is ok now.
1517 kes Implement SD code to check length of disk volume before appending.
1519 kes Correct return status on db_batch... routines.
1520 kes Add call to db_write_batch_file_records() to migration code.
1521 ebl Fix AfterJob timing
1522 kes Move the checking of the database in initializion of the Director
1523 to after we drop privileges. This avoids the need for both root
1524 and bacula access to the DB.
1525 kes Correct a misplaced variable definition in src/filed/backup.c
1526 kes Correct how the new batch insert db_create_attributes_record()
1527 uses the arguments. Caused a seg fault in bscan.
1528 kes Implement lock() and unlock() methods in DEVICE class.
1529 Implement block() and set_block(xx) methods in DEVICE class.
1530 kes Modify bnet_connect() so that it uses time() to check for the
1531 wait time expiring (on some OSes, some system calls may not
1532 return immediately).
1533 kes Modify Verify to obtain the previous JobId when it is actually
1534 running rather than at schedule time (as it was in 1.38.x).
1535 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1537 kes When checking pid in pid file, continue running if the pid is
1538 the same as ours. This occurs on IRIX after a system crash.
1541 kes Extend new GUI API.
1542 kes Make the ua structure a class, and implement send_msg(),
1543 error_msg(), warning_msg(), and info_msg().
1545 kes Apply fix from for building wx-console on the Mac from
1547 kes Implement new select mechanism for GUI programs.
1548 kes Reorganize initialization of stackedWidgets in bat.
1550 kes Add updated nagios plugin supplied by Christian Masopust.
1552 kes More bat implementation.
1553 kes File migrate bug with Pool Occupancy using mediaid instead
1554 of jobids. Fixes bug #795.
1555 kes Fix orphaned buffers in filed backup and verify due to
1556 crypto buffers not freed during errors. Fixes bug #789.
1557 kes Extend new GUI api code to tree commands.
1558 kes Ensure that tree and dot commands check console ACLs.
1559 kes Permit marking directory with trailing slash.
1560 kes Allow 20 console connections (instead of only 10).
1562 kes Add smartctl call to bacula-sd.conf as an example of getting
1565 kes Modify jobq.c to let simultaneous restore jobs run. This may
1566 cause them to fail if they cannot get a drive.
1567 kes Add Client Connect Wait to Storage daemon to permit users to
1568 modify the time the SD waits for a FD connection.
1570 kes Correct virtual changer check which was backwards. This caused
1571 volumes to be unloaded into slots already occupied.
1573 kes Apply Command ACL filter to JobId list in restore command.
1574 kes Correct typeo in var.c patch.
1576 kes Don't let Bacula prune File or Job records for the current Job.
1577 kes Fix variable substitution pad + inc bug reported (with patch)
1580 kes Correct SQLite log table index as reported by Luca Berra.
1582 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1584 kes Begin implementing new comm signals for API.
1585 kes Fix a few places in lib/message.c where the open fd may
1587 kes Continue implementing lib/bsock.c (real class). Make jcr,
1588 who, host, and port private. There are new methods to access
1589 them for non-class use. This required touching a number of files.
1591 kes Add LANG=C to autoconf/randpass so it works with languages other
1592 than English. Fixes bug #788.
1594 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1596 You will not be able to generate Include/Exclude list any more.
1597 It will be fixed soon.
1598 If you want to use this, you can apply
1599 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1601 kes Restore of sockets created false error messages because Bacula
1602 no longer restores sockets, but the code was still trying to
1603 set the attributes on a non-existent file. Reported by a user.
1604 ebl finish RecyclePool feature
1605 Media will takes Pool.RecyclePool
1606 when moving from Scratch to a Pool or when user will do
1607 update volume=xxx frompool
1608 To use it, add RecyclePool = aPool to your Pool resource
1611 RecyclePool = Scratch
1615 kes Expand new BSOCK class adding signal() and new BNET signals.
1616 kes Begin enhancing the dot commands adding a new API function
1617 that returns more information and will make it easier
1618 to interface to the Director from a program.
1620 kes Make DEVICE fd private. Its new name is m_fd, and can be
1621 obtained with dev->fd() outside the class. This is the
1622 first of many DEVICE members to be made private.
1623 kes Implement Michael Renner's idea on having a virtual disk
1624 changer. I made some minor modifications (e.g. I did not
1625 implement the Virtual Changer directive, but simply set
1626 the Changer Command to an empty string.
1628 kes Implement a BSOCK send() method that writes the whole record
1629 in a single write() request rather than in two.
1630 ebl add update volume=xxx recyclepool=yyyy
1631 volume takes recyclepool from pool when using update volume=xxx from pool
1633 kes Fix encryption deblocking bug, which caused some restored files
1634 to be truncated. This fixes bug #763.
1635 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1636 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1638 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1639 ebl Use btime_t instead of uint64_t in media patch.
1641 kes Optimize the use of the database a bit in the Status dir command.
1642 Only open it when needed, ensure that if any previous database
1643 was opened, it is closed.
1645 kes Correct VolCatBytes bug from media patch.
1646 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1647 in the case of orphaned records.
1648 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1649 and File records in 300K chunks to be more efficient. This
1650 idea came from Juan Luis Frances (if I remember right).
1651 kes Apply Eric's scratch patch that moves a purged Volume to
1652 the RecyclePool. Question: how is RecyclePool set? what
1653 happens to the ScratchPool?
1654 kes Apply Eric's media patch that collects read/write media
1655 times as well as byte counts. This patch requires a
1656 simultaneous upgrade of the DIR and SD. Note, there
1657 should be some way to turn off timing. I'm not sure
1658 times are in Bacula units.
1659 kes Apply Eric's batch-insert patch.
1661 kes Update projects list.
1663 kes Implement Include/Exclude file lists in FD as dlists using
1664 the new dlistString class. This permits efficiently having
1665 large include/exclude lists and completes project Item 25.
1666 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1667 console is authorized to cancel the job. This fixes bug
1669 kes Modify SD so that the VolCatJobs medium record is updated
1670 at the beginning of a Job rather than the end. This
1671 fixes bug #775 where exceeding MaxVolJobs caused jobs
1673 kes Added a mutex around getting and setting Volume information
1674 so that multiple simultaneous jobs will single thread.
1676 Switch to using Subversion
1677 kes Remove src/pygtk-console/ from configure
1679 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1680 plus the entrypoints.
1681 kes Apply patch supplied that corrects debug print
1682 in canceling jobs for max run time. Supplied as
1683 part of bug #621, which was previously fixed.
1685 kes Test on job_canceled() and sd_msg_thread_done inside
1686 loop starting the message thread to avoid a race condition.
1688 kes Remove rl_catch_signal from console.c as it conflicted
1689 with the header definition. Fixes bug #765.
1690 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1692 kes Clarify some stored/acquire messages to indicate if the
1693 problem is with read or append.
1695 kes Fix memory leak with storage ids in cats/sql_get.c
1696 kes Terminate watchdog earlier to avoid reference to released
1697 memory -- reported by Jason Austin.
1698 kes Move closing the database from jobq.c to the director daemon
1699 termination routine. This fixes memory leaks for shadow jobs
1700 (i.e. migration jobs).
1701 kes Free up the unique jobid chain items in migrate.c. This fixes
1702 a memory leak problem.
1703 kes Convert some ugly looking for statements to use foreach_alist
1704 in findlib/find.c. This will facilitate converting the structures
1705 to use dlist (for large include/exclude lists).
1706 kes Fix a bug in the btree.c and btree.h routines, then rename them
1707 rblist and add them to be built in src/lib. Include some new
1708 methods written by Rudolf Cejka that make the code more readable
1709 (hides some of the ugly casting).
1710 kes Add set_next() and set_prev() methods which make the code much more
1711 readable. Also add a new dlistString class that facilitates storing
1712 strings in dlists. To be used in the large include/exclude lists.
1713 kes Make some trivial modifications to lib/tree.h that use rblist
1714 rather than dlist for storing the tree links. This was suggested
1715 by Rudolf Cejka. The result of this is that the restore tree now
1716 uses red-black binary trees rather than simple linked lists. This
1717 should give rather dramatic speed improvements for directories
1718 contining large numbers of directories/files (more than 10000).
1720 kes Fix maxruntime bug #621.
1722 ebl Implement the include JobID in spool file name project.
1723 kes Reorder projects file in order determined by Jan 2007 vote.
1724 kes Implement item #12 on project list -- quick release of FD by
1726 kes Fix open of SQLite3 db where user does not have write permission
1727 so that DIR does not crash. Fixes bug #761.
1729 kes Add back missing @ in Win32 Makefile.
1730 kes Change 'Device not configured to autolabel' from INFO
1732 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1733 which should restart an indefinite # of times.
1734 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1735 other DIR specifications.
1737 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1738 Fix path quoting in SQLite scripts.
1739 Fix problems with SHGetFolderPath.
1741 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1743 kes Fix Job restart on error bug that promotes an Inc to a Full
1744 backup. This should fix bug #755.
1745 kes Add qt-console and first cut of code.
1749 kes Fix Bacula->Documentation link on Win32 to point to index.html
1750 instead of bacula.html. Fixed bug #750.
1751 kes Return JobId in db_get_job_record() when JobId==0. This should
1753 kes Do not release source pointers when restarting a failed job.
1755 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1756 This *should* fix bug #747.
1757 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1760 kes Modify USTORE constructor to set an empty store_source string,
1761 and don't copy the store_source string in a cancel. Hopefully
1762 this will fix Arno's seg fault, bug #744.
1763 kes Add back code to disable conio in configure. Fixes bug #743.
1764 kes Correct the Options scanner in the FD to correctly handle
1765 SHA1 option, which was eating the next option. Reported by
1767 kes Add code to indicate when the SD is spooling, spool wait, and
1768 despooling as requested by Alan Brown.
1770 Version 2.0.0 released: 4 January 2007