1 Technical notes on version 2.2
5 kes Fix a couple of pedantic compiler warnings.
6 ebl Fix bug when starting a restore on a storage that doesn't
7 have the requested MediaType.
9 kes More work on word alignments -- eliminate all ints from
10 the configuration routines.
12 kes Fix bug reported by Scott Barninger where the bacula script
13 refers to scripts in the wrong directory. Needed to meet the
14 requirements of recent FHS location changes.
15 kes Fix word alignment problem on non-Intel 64 bit machines
16 such as Solaris. This should fix bug #1097 -- bus error in SD.
18 kes Add missing win32/patches/wxWidgets.patch to 2.4 repository.
22 kes Update version to reflect the magnitude of the SD changes.
24 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
27 kes Add create_postgresql_database.sql to Win32 installer. Should
28 fix problem reported by Juilio Monteiro.
29 kes Get correct slot when auto unloading a device. This fixes bug
32 kes Fix multiple media restore.
33 kes Make DEVICE Slot private and access it via a method.
34 Allows better control over when it is set and cleared.
35 kes Fix possible seg fault if SQL error.
37 kes Add debug code to SD.
38 kes Fix renaming a Volume, which used the wrong Volume name.
40 kes If operator has rewind tape, print warning, release tape and
41 try once more. If tape is positioned somewhere, something went
42 wrong, so mark the tape in error and try once more. Previously
43 this error was fatal, now it produces an error message.
44 kes Ensure correct volume name displayed during restore
45 kes Ensure that Volume is mounted for restore.
47 kes Fix a few more Coverity reported problems.
49 Beta Release Version 2.2.10-b4
51 kes Enhance a couple of SD debug messages.
52 kes Tweak unload flag setting and ensure it is set during swap.
54 ebl Fix #1091 about bad output in estimate command.
56 kes Modify autochanger locking to attempt to avoid race
58 kes Make sure device not busy before doing label command.
59 kes Display open() errors except when polling. Previously too
60 many were suppressed. This should fix bug #1070.
61 kes Fix Win32 reparse points. Bacula will not recurse into any
62 reparse point directory, including mount points, unless the
63 directory is explicitly mentioned at the top level (same as
64 with Unix). A file that is linked to another file will be
65 backed up -- much as Unix does for hardlinked files.
68 kes Remove double quotes from ChangeLog and ReleaseNotes
69 kes Remove StorageId test when pruning and recycling (Eric's changes).
70 kes Remove old form of locking when getting volumes -- causes deadlock.
72 kes Fix buffer overruns detected by Coverity.
74 Beta Release Version 2.2.10-b3
76 kes Tweak joblog display.
78 kes Implement --without-qwt
79 kes Fix layout of restore tree dialog
80 kes Add configure bat QWT libraries, so that bat can be built
81 with or without the QWT libaries.
83 kes Apply batfix bat cleanup patch from Riccardo.
84 kes Make sure we unload the right slot when swapping.
86 kes Improve SD reserve debug code.
87 kes Testing an improvement to free up volumes no longer in use.
89 Beta Release Version 2.2.10-b2
92 kes Rework SD acquire for read to handle autochanger Volume
94 kes Implement regression that explicitly tests swapping a Volume
95 from one drive to another.
96 kes Enhance disk-changer to detect most error conditions.
97 kes Fix SD code so that it properly swaps a Volume between drives.
100 kes Prevent a Volume that is being swapped from being freed from
101 the volume list. This will most likely fix, at least partially,
103 kes Fix strippath so that it does not get a buffer overrun and crash FD.
104 This fixes bug #1078.
105 kes Make inability to change owner/group when creating a dir only a
106 warning rather than an error.
108 ebl Fix SQL query in migration code
110 kes Force unload of volume when wrong volume mounted in SD.
112 kes Fix bat seg fault at termination.
113 kes Add Bacula generated version to bat about box.
115 Beta Release Version 2.2.10-b1
117 kes Permit multiple simultaneous restores -- experiment.
119 kes Backport development stream SD reservation system changes.
122 kes Move final volume swapping code to DCR method and
123 call it from acquire_for_read().
124 kes When wrong volume is mounted during read, unload_autochanger.
126 kes Stop searching for Volumes in SD askdir if DIR returns the
127 same volume name twice in a row.
129 kes Tweak the swap Volume from one drive to another code so that
130 it now seems to work.
131 kes Resolve several problems with recycling that broke the new
132 code (these problems are in 2.2.9 as well).
133 kes Remove the volume lock when calling the sysop code.
134 kes Don't mark a reserved volume with no writers as unused otherwise
137 kes Rework class structures for VOLRES, DCR, and DEVICE to make
138 the method names a bit more logical, and for more logically
139 handling the responsibilities.
141 kes Remove redundant code in terminating the scheduler that just
142 causes a seg fault in many cases.
143 kes Cleanup releasing a volume and make it a DCR method.
144 kes Improve algorithm for detecting pre-reserved volume and
147 kes Tweak volume swapping code so it works.
148 kes Correct name overloading in mount.c
149 kes Replace released flag in VOLRES with reserved and add access
150 methods for the VOLRES class.
151 kes Prevent volume from being released while being swapped.
152 kes Refactor parts of stored/mount.c
154 ebl Add sanity checks for VolWriteTime and VolReadTime
155 ebl Take care of bad clock changes while computing VolWriteTime
156 and VolReadTime. This should fix or limit #1066
157 kes Correct error string numbers in dird/catreq.c
158 kes Restructure reserving, acquiring, and mounting volumes. Calls to
159 autochanger are deferred for mount.c -- simplifes the code.
161 kes Do not prune any running job. It just fails the job.
162 kes Lock the volumes when changing dev->reserved_device and marking
163 the volume unused otherwise the device can get reserved by
164 another job before the volume is released, thus blocking it.
167 Beta Release Version 2.2.9-b7
169 kes Close bat console windows first to eliminate error message
171 kes Remove useless code in Scheduler that causes seg fault on
173 kes Correct some SD catalog request error messages.
174 kes Don't allow pruning of any running job.
175 kes Turn off code in read_record that causes a seg fault in the SD
176 when reading past an EOS_LABEL.
177 kes Turn off unloading the autochanger in reserve.c as it just
179 kes Lock volumes when unreserving a device.
180 kes Do not mark volume unused when recycling.
181 kes When acquiring, don't mark volume unused if it is reserved (busy).
183 Beta Release Version 2.2.9-b6
185 kes Eliminate ./configure warning on po directory
186 kes Fix bug #1063, reuse of freed ptr in list nextvol.
187 kes Release regex compile buffer in filed/job.c
188 kes Add proper type of const char in sql_create.c
189 kes Turn off debug in daemon termination routines
190 kes Move free_volume_list() before devices are freed in stored.c
191 kes Fix reference to uninitalized stack variables in bregex.c.
192 This should correct bug #1067.
194 kes Fix possible seg fault in SD when freeing a volume entry.
196 kes Apply patch from bug #1069 that corrects spurious error messages
197 when ACLs enabled on SGI but no ACL exists.
198 ebl Fix a storage deamon segfault at debug level 500.
200 Beta Release Version 2.2.9-b5 -- not released
202 Beta Release Version 2.2.9-b4
204 kes Re-enable code to remember last volume mounted on a non-tape
206 kes Add patch supplied in bug #1068 that fixes a SD crash when using
207 a Virtual autochanger.
208 kes Generate correct JobMedia records during spooling/despooling when
209 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
210 <tih@hamartun.priv.no> for excellent analysis and testing.
212 Beta release Version 2.2.9-b3
214 kes Rework certain SD locking based on gdb tracebacks of deadlocks
215 sent by Eric. This code now uses only the volume_lock() rather
216 than the reservations lock when at EOM and acquiring a new
218 kes Ensure only one exit point in several subroutines.
220 Beta release version 2.2.9-b2
222 kes Fix to initial tape drive open to release the volume name
224 Beta release Version 2.2.9-b1
226 kes Fix to JobMedia fix.
227 kes Fix bug pointed out by Peter Much that causes the StorageId to
228 be updated when reading a tape (during migration, it could have
229 been incorrectly set to the write StorageId).
231 kes Implement autostart scripts for Debian
233 kes Fix mtx-changer.in for broken Debian mt program.
235 kes Massive commit of all fixes and back ports to create 2.2.9
237 kes Apply doc fix from bug #1062.
238 kes Resolve crash and improper restore wx-console Win32 restore
239 GUI. Fixes bug #1065.
240 kes Update Win32 wxWidgets to latest version.
241 kes Attempt to do correct handling of Win32 mount points. Should
243 kes Fix Win32 FD backup/restore memory leak due to improper termination
244 of BackupRead/Write. This fixes bug# 1038.
245 kes Add const to AIX prototype for initgroups()
247 kes Undo bug #1047 heap overrun fix as it is not correct.
249 kes Fix creating first JobMedia record during Migration to include
250 proper index. This caused slow restores of migrated jobs.
252 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
253 and do not strip paths on symbolic links.
254 kes Set catalog backup database and user name from values specified on
255 the ./configure line.
256 ebl Apply patch to correct bug #1031, about wrong pool source information
259 Release Version 2.2.8
261 kes Apply patch from Martin to correct bug #1040, bscan sets existing
263 kes Fixed important spelling error in doc -- bug #1045.
265 kes Move initialization of read/write res lock earlier in the code.
266 This fixes the crash with a null conf file. This fixes bug
268 kes Redefine CURES in lib/parse_conf to be URES and move it all
269 into lib/parse_conf.c -- this responds to bug #1042, but does
270 not fix it. The fix is not to compile with FORTIFY_SOURCE.
271 kes Backport fix de-referencing a NULL pointer in the scanner from
272 the trunk SVN. I don't think this was reported as a bug.
274 Beta release Version 2.2.8
276 kes Re-enable the new job code editing (%f).
278 kes Fix bsnprintf for float point numbers. I broke recently when
279 parameterizing some variables. This fixes bug #1036.
281 kes Move Heartbeat documentation from Job to Director resource.
282 This fixes bug #1033.
284 kes Fix existing switch drive SD code to call autochanger to release
285 any old volume. This must be done to keep the autochanger from
286 releasing subsequently newly reserved volumes in doing a close().
287 This should possibly fix bugs #1032 and #1018.
288 kes Apply big backport of current SVN SD code that corrects a number
289 of race conditions. This is a first step in fixing bug #1018.
291 ebl Fixes bug #1028 where "Selection Type" option was not usable
295 Release Version 2.2.7
297 kes Partial back out (disabled) %f job code editing because it
298 does not build on Win32.
299 kes Fix seg fault Frank Sweetser reports in regression testing
300 on his systems. The problem was that the original author of
301 bsnprintf.c did not take into account the side effects of
302 using ++x in the argument to a #define.
304 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
305 that implements double quoting include names in conf files,
306 and also allows piping input by having the first character
307 be a vertical bar (|).
308 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
309 that implement %f in RunScripts to pass the FileSet name.
310 kes Skip leading | when lex input comes from a pipe as suggested
311 by Michael Stapelberg <michael@stapelberg.de>.
313 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
314 Nerijus Baliunas <nerijus@users.sourceforge.net>
316 kes This patch corrects a problem where the maximum concurrent storage
317 jobs counter gets out of sync during restore jobs causing jobs to
318 'wait on max Storage jobs'. This patch fixes bug #1009.
320 kes Add new include to postgresql.c suggested by Marc Cousins so
321 that it compiles correctly with pgre version 8.3. Also fix
322 misuse of %x with pointer (should be %p).
324 kes This patch fixes bcopy so that it produces correct Volumes.
326 kes This patch eliminates spurious output to the console during a VerifyVolume
327 job that contains encrypted data. It fixes bug #1024.
329 kes This patch prevents the 'status dir' command from trying to use a scratch
330 volume and possibly moving it from one pool to another. This patch fixes
333 kes Fix --archivedir addition to configure. Replace it with
334 --with-archivedir in configure.in This fixes the regression
336 kes This patch fixes bug #1012 where the job is canceled because
337 of Max Run Time exceeded when the job has not yet started.
339 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
340 one 'part' to write. Instead of each part being stored on disk,
341 written to DVD, then deleted from disk, all parts are written to disk,
342 and only the last is written and deleted from disk.
344 kes Correct typos in disk-changer.in
346 kes This patch fixes the status command to include the formating string for
347 JS_AttrInserting. It fixes bug #1021.
348 kes This patch should fix the Mac OS X build problem on the latest
349 Darwin, where sys/types.h was not included correctly (apparently
350 due to a change in the Mac headers). The solution was to explicitly
351 ensure that it is defined for the ./configure.
352 This patch also has a rebuild of configure that includes the Debian
353 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
354 kes This patch should ensure that queued messages to the console are
355 displayed as soon as possible. It should fix bug #1007, but has been
356 reported not to work.
358 kes This patch fixes the infinite loop when trying to increase the
359 maximum number of volumes in a Pool during the add command.
360 This patch fixes bug #1008.
362 Release Version 2.2.6
364 kes Get fix for joblist bug in bat from trunk.
366 kes This patch fixes bug #1003 where putting the message output from
367 a Verify job into the catalog results in a recursive loop. The problem
368 seems to show up only with postgresql (to be verified).
370 kes Fix bug #942 where lots of emails where generated when the heartbeat
371 interval was low and Bacula wanted a different tape from the one in
374 ebl Apply 2.2.5-lastwritten.patch to fix the LastWritten field
375 which was updated during a restore (or a reading migration) bug #982
377 ebl Use qmake-qt4 instead of qmake when available (debian system).
379 kes Add a security warning to src/cats/make_catalog_backup.in indicating
380 that passing the password via the command line (arg 3) is insecure.
381 This responds to bug #990 (it doesn't fix it).
382 kes Apply 2.2.5-postgresql-errors.patch
383 kes Remove unneeded File table index on JobId, which is already
384 present as the first index of another multi-index.
386 kes Set default debug_level to zero. This corrects bugs #991 and #993.
387 kes Fix a crash in bat when it cannot connect to the Director for example
388 if the Director is not running.
390 kes Activate Close button on tray-monitor window. This fixes
393 kes Fix spurious warning message printed when creating a volume with
394 a LabelFormat. This fixes bug #976.
396 Release Version 2.2.5
398 kes Add JobId in place of Job name in all the Jmsg() output.
399 kes Correct the APP_DESC for the Win32 storage service (remove an e).
401 kes Add new SD despooling attributes and Dir inserting attributes
402 job status codes. This fixes bug #961.
403 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
405 kes Fix doc issue. This fixes bug #963.
406 kes Fix listing performance problems in bat. Pointed out by
408 ebl Fix replace on restore. This fixes bug #969
409 kes Fix bat code that tests for Win32. This should fix bug #968
410 kes Query 5 list wrong Vol after migration. This fixes bug #960
412 kes Correct lib/Makefile.in to include enh_fnmatch.o that was removed
413 in back porting from 2.3.x
415 kes Backport almost 4000 lines of 2.3 code that fixes a number of bugs.
416 The details are included in the notes in this file.
418 kes Backport 2.3 code that fixes: it fixes incorrect or incomplete error
419 messages; it fixes a problem opening the SQLite3 database when multiple
420 simultaneous jobs were running; it fixes a bug with certain versions of
421 MySQL where batch inserts failed because of table name character case
422 (upper/lower) differences.
423 kes Fix race condition that drops final block written to volume.
424 This happens in rare cases with multiple simultaneous jobs
425 when the Volume fills. This fixes bug #964. May be related
426 to bug #935 and possibly #903.
428 kes Fix FD->SD authorization failure, which was due to spurious
429 wakeups from a pthread_cond_timedwait(). Simply check the
430 predicate before continuing. This fixes bug #953
431 dvl Add new configuration item --archivedir
432 dvl Adjust regression tests to use tmp not /tmp. This will allow
433 multiple concurrent runs of the regression tests.
435 kes Eliminate more strerror() and replace with bstrerror().
436 kes Remove BSD getopt and replace with unrestricted IBM version.
437 kes Fix Win32 build for changed calling sequences.
439 kes Fix FD->SD authorization failure, which was due to spurious
440 wakeups from a pthread_cond_timedwait(). Simply check the
441 predicate before continuing. This fixes bug #953.
442 kes Add const char where needed (more to do).
444 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
445 kes Don't overwrite error message in check_tables_version.
447 kes Unlock batch insert tables with same calls used elsewhere.
448 kes Allow starting 59 jobs a second.
449 kes Make SD session key more random.
450 kes Add retry for SQLite opening db if it fails. Probably helps
452 kes Suppress extra error messages during batch insert failure.
454 kes Put some FD auth code on dbglvl rather than fixed.
455 kes Return insert attributes error message in db msg buffer to avoid
456 false error messages. Helps fix bug #966.
457 kes Separate batch init error messages. Probably helps fix bug #966.
458 kes If Dir gets an error during inserting attributes, cancel SD.
459 This reduces unnecessary error messages.
461 ebl Cleanup batch insert code. Probably fixes bug #965.
463 kes Turn off some code when batch insert not enabled.
464 kes Edit FD name in connect error messages.
466 kes Add code to handle tray monitor separated from Win32 FD.
467 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
469 kes Fix ANSI tape labeling. This fixes bug #954.
470 kes Increase the max block size to 4MB fixes bug #957.
471 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
472 is not properly mounted (recognized) during a poll.
473 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
474 Job that has differences reports Verify OK.
475 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
477 Release Version 2.2.4
479 kes Increase size of name string when FD making connection to SD.
482 kes Add waits to multiple exit detection code to try to force pid
483 file to always be deleted.
484 kes Restore good dev.tar.gz to rescue set appropriate binary property.
486 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
487 trying to switch drives by checking for blocking before unblocking.
489 kes Cancel storage daemon in all cases where FD reports error. This
490 should fix virtually all cases of bug #920.
492 kes Fix error message that was clobbered when Dir tells SD it does not
493 have write permission on Volume. This should fix a minor point
494 in bug #942, but not the main problem.
495 kes Add code to cancel job in SD if FD connection fails. This should
497 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
498 kes Fix migration code to get correct Volume name with multiple volumes
499 by skipping |. Fixes bug #936.
500 kes Implement patch supplied by Landon to fix bug #944 where using
501 TLS with bconsole uses 99+% of the CPU.
502 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
504 kes Move patches into patches directory.
506 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
509 ebl Using 'm' in bconsole will show messages like before,
510 and not memory usage.
512 Release Version 2.2.3
513 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
516 kes Fix bug #935, and probably also bug #903 where files were not
517 restored. MediaId was not properly set in JobMedia record after
520 kes Add ./configure search in qwt-qt4 for qwt package
521 kes Apply Martin Simmons patch that should turn off the new API usage
522 when batch insert is turned off allowing building on older
525 Release Version 2.2.2
527 ebl Detect if new PosgreSQL batch insert API is present.
528 kes Correct incorrect mempool call causing Director crash.
529 sb Update spec files for 2.2.1 release
531 Release Version 2.2.1
533 kes Update POTFILES.in
534 kes Cleanup a few underquoted AC_DEFUNs in configure
535 kes Apply patch from Martin Simmons that adds a test for va_copy to
538 kes Fix bug #921 by increasing the number of tries to create a new volume
540 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
541 can be called multiple times. Implement a version for machines
542 without va_copy() that gets a big buffer.
544 kes Integrate more portable zone offset code into bsmtp.c
545 Submitted by Attila Fülöp.
547 kes Fix bad SD->FD return status reported by
548 (James Harper) <james.harper@bendigoit.com.au>
549 ebl Fix a bug in read_close_session which return random status
550 thanks to James Harper
552 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
553 and directory names during restore of single file/directories.
554 kes Add sanity checks to .sql command when string is empty. Hopefully
555 that will resolve Dirks Director crash.
557 kes Apply patch submitted by Martin Simmons that corrects a seg fault
558 in the bsmtp chat subroutine when debug is >= 10.
560 kes Fix Director crash when running bat SQL queries.
561 kes Add David's notes on Item 8: Copy pools.
563 kes Rework projects file to be current and ready for a vote.
564 kes Enhance lex scanner error message.
566 kes Tweak LICENSE file to mention BSD code.
567 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
568 if specified on the ./configure.
569 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
570 This class is intended to allow us to open a second bsock to the
571 Director while in the restore subdialog.
573 kes Fix configure to create bat Makefile before creating dependencies.
574 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
575 kes Add a tooltip to the tray monitor.
576 dvl Set the Director's PID file before dropping privs. This fixes
579 kes Update AUTHORs file
580 kes Increase the default max concurrent jobs to 20 in FD and SD to
581 correspond with the default .conf files.
582 kes Rewrite the Win32 service routines. This eliminates the 3 copies
583 some different, of the same file created by RN when porting the
585 kes Rearrange some of the Win32 directories and the placement of the files
587 kes Set DEVELOPER flag in version.h
589 ========================================================================
590 Release Version 2.2.0
592 kes Apply a second doc patch from Marc.
593 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
594 improves the tips section that discusses how to setup multiple
597 kes Update bat README file.
598 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
599 corrects a typo in the Recycle status check in db_find_next_volume().
600 This will probably fix a number of annoying problems with multiple
602 kes Modify most of dird/msgchan.c to use bsock class calls rather than
603 bnet calls -- no functionality change.
605 kes Modify the Verify output to specify if files are missing on
606 the Volume(s) or disk. Fixes confusion in bug #916.
607 kes When more than one Volume is read in a migration job, the last
608 Volume bytes reported are from the last read volume rather than
609 the last written volume. Fixed. This fixes bug #910.
610 kes Fix display of Recycle flag after update volume=foo recycle=yes.
611 It previously printed New Recyle flag is: no. This fixes bug
614 kes Correct seg fault when switching tape drives during restore.
615 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
616 be used until after 2.2.0 release.
618 kes Remove fnmatch() in SD that permitted wild card specifications.
621 kes Fix %g in filename returned by SQL for browse tree reported by
623 kes Fix configure so that it puts config.out in the cwd rather than
625 kes Attempt to fix the locking problem reported by Eric in bug #906.
626 kes Make berrno class to leave errno unchanged after constructor call.
627 kes Make bnet_server use the heap rather than the stack to allocate
628 its socket fd pointers to avoid a crash at termination. Problem
629 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
631 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
632 and putting it in depkgs-qt along with Qt4.3.
634 kes Rework code in acquire.c that switches drives for reading when
635 the Media Type does not match. This should fix bug #906
637 ebl Fix a director segfault during job setup #907
638 kes Correct seg fault in postgresql when first operation returns no
639 rows. Fixes Dirks File browser problem seg fault with bat.
641 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
642 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
645 kes Implement PopUp YES/NO dialog for bat.
647 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
649 kes Correct RunScript to terminate job in FD on failure.
650 kes Change abort_on_error and AbortJobOnError to fail_on_error
651 and FailJobOnError in RunScripts.
652 kes Minor tweaks of code formating in RunScripts, principally to
653 avoid depassing 80 columns.
655 kes Eliminate one #ifdef Win32 in bsmtp
656 kes Implement grow tool to grow a file for testing very large databases.
657 kes Add big-vol-test to test Bacula seeking with > 5GB.
660 kes Modify find_next_volume() to return all values in Media record.
661 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
665 kes Update Release notes
667 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
668 Warning, in previous beta version, all media get from scratch keep their
671 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
672 This should fix bug #842. Made a note to look at removing the temp
673 files at the end of the install.
674 kes Add ability to mount and unmount a file device providing it is
675 marked as being removable and has the appropriate mount and unmount
676 commands defined in the Device resource. This fixes bug #830.
677 kes When applying a storage override, release all previous storage
678 definitions rather than just prepending the new storage.
679 This should prevent a good deal of confusion.
681 kes Implement ./configure search for qwt libraries.
683 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
684 Win32 FD. This should fix bug #893.
685 kes Remove an unnecessary beep in Win32 init code.
686 kes Update copyright dates in Win32 executable about boxes.
687 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
688 code with a BSD getopt.c and getopt.h.
689 kes Remove sched.h from the Win32 compat directory -- not used.
690 kes Remove the Exit menu item from the Win32 tray monitor. If you really
691 need to shut it down, do it through the services panel or the command
693 kes Remove some inappropriate Bacula FSFE copyrights.
694 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
695 kes Fix regress config non-portable test as pointed out by
696 Florian Heigl <florian.heigl@gmail.com>
697 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
698 as pointed out by Florian Heigl <florian.heigl@gmail.com>
700 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
701 Reported by Frank Sweetser.
705 kes Fix client-only build.
706 kes Integrate client-only fixes for bsys (initgroups) and conio from
707 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
708 kes Make arguments to get_scratch_volume() in same order as other
710 kes Rework the prune_volumes() subroutine so that after purging and
711 no volume found in desired pool, it will check for a scratch
712 volume. This prevents recycling the whole scratch pool.
713 kes Add code to status storage to print boffset_t (largefile support).
715 kes Move qwt (Graphics libarary for Qt4) to depkgs.
716 kes You now need a --with-qwt=<dir> to be able to build bat.
717 kes Update src/win32/cats/bacula_cats.def to include the new
718 db_get_query_dbids() call on Win32.
720 kes Correct a problem when selecting a scratch volume and moving
721 it to another pool that lost some columns.
722 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
723 kes Enhance Autochanger error messages to include Volume and device name.
724 kes Rework prune_volumes() code to take account of InChanger flag,
725 and to handle recycling volumes going to the Scratch pool and
726 current pool because the RecyclePool directive.
727 kes Implement a better and more efficient db_get_query_dbids() to
728 handle creating and passing back a list of DBIds.
732 kes Start work on new more efficient DBId subroutine. First use
733 will be for recycling volume to Scratch inchanger.
734 kes Increase number of JobIds in pruning from 1000 to 10000.
735 This to be replaced by above routine.
736 kes Begin implementation of building Qt4 on Win32.
737 kes Correct typo in fix I added for bad TLS shutdown.
738 kes Pull 2.0.3 patches into patches directory.
739 kes Update Release notes. Include qt-console in line count.
740 kes Update Projects file.
742 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
743 bug in migration code where a job that spanned two volumes
746 kes Implement new BST_DESPOOLING blocked state. Change from locking
747 during despooling in SD to blocking. This means that other threads
748 can work with the device structure, in particular the reservations
749 system while despooling.
751 kes Fix return in reservation message queue that missed clearing
752 the jcr lock (implemented 26Jun07 below).
753 kes Rename a number of dev methods to make locking function names
755 kes Document locking in lock.c. Move lock structures to new file
758 kes Move reservations message lock to lock jcr only this
760 kes Move main SD locking code into lock.c (new file).
761 kes Update Win32 build to include lock.c
765 kes Dirk committed the qwt library code for drawing graphs in bat.
766 kes Tweak install of qwt so that it is integrated with ./configure.
768 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
769 out by Eric (my typo).
770 ebl Fix configure.in to get batch mode enable
771 kes Return correct string from authenticate.cpp in bat when connecting
773 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
774 spurious line drops when using TLS.
775 kes Do not file reparse points when restoring a file that already
778 kes Implement Windows reparse points -- similar to directories, but
779 we do not descend into it. This is a first cut. They seem to
780 be backed up, but restore is not yet tested.
781 kes Remove restore_blocking in tls code when shutting a socket to leave
782 it in blocking mode. Hopefully this will fix the encryption bug
783 reported by Frank Sweetser.
784 kes When opening a file for backup, tell the OS that we are going to
785 read it sequentially -- optimization.
786 kes Change variable names in authenticate_director() to not conflict
787 with member names in bat. Caused great confusion with compiler,
790 kes Queue openssl error messages in case of comm problem.
791 kes Do shutdown() call if socket terminated.
792 kes Remove some duplicated code in tls.c
793 kes Move more of the bsock member variables into private and access
795 kes Add Frank Sweetser's tls-test to the regression suite.
797 kes Add Swedish sv.po file
799 kes Don't print clock skew message in FD if less than 3 seconds diff.
800 kes Add a bit of VSS info to status client.
801 kes Implement a first cut of Vista VSS, using Win2003 code.
805 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
806 loaded tape but uses first drive).
807 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
808 This was indeed a Win32 issue.
810 kes Simplify search of autochanger for in-use Volume.
811 kes Fix exit condition of check for in-use volume. kes Remove
812 inappropriate my_postgresql_free_result() in db_close()
814 kes Fix bad return in FD when encryption signature not found.
815 Probably caused a crash.
816 kes Inhibit missing encryption signature error messages for
817 file types where no signature computed.
818 kes Correct inverted check on autochanger in reservation system.
819 kes Tweak debug code in autochanger reservation.
821 kes Add some additional locking in the cats directory in subroutines
822 that modify packet variables called from batch insert.
823 kes Rework how dcrs are allocated. new_dcr() can now be called
824 with an existing pointer, and it will simply clean it up.
825 This allows the reservation system to test various different
826 devices, and will permit easy device changes.
827 kes A bunch of changes all over to handle new new_dcr() calling
829 kes Work more on the Volume management in the SD. Remember Volumes
830 for tape drives and for autochangers (even virtual disk changers).
831 kes When looking at the Volume list to reserve a drive, handle
832 autochanger names correctly by interating through the changer
833 devices. Also call the Director to see if a Volume is suitable
835 kes Fix some bugs in bscan. Make sure all media records are written.
836 Make sure that valid JobMedia records are written for disk files.
837 Previously they were completely wrong.
838 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
839 that the URLs don't change and so that the developers will all
840 work off the same copy. Rebuild from scrach.
841 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
845 kes Fix seg fault in FD from incorrect digest size.
846 kes Fix argument to non-OpenSSL crypto.c subroutine.
850 kes Remove a few malloc()s from the encryption code.
851 kes Use the class calls to bsock in filed/backup.c and restore.c in
852 place of the old bnet_xxx code.
853 kes Implement code that does an on the fly calculation of the
854 signing digest during restore of encrypted files. It makes
855 a best guess at the algorithm, and if it is not correct, will
856 then revert to the old code which reads the file after it is
858 kes Implement at least one missing crypto stream in stream_to_ascii()
859 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
860 #877 where a reload with bad syntax causes Dir to exit.
862 Cut: 2.1.14 beta (not released)
864 kes Do not free a volume on a tape drive until another volume is
865 mounted and read, or the autochanger unloads the volume.
866 This should help the SD re-use volumes that are already mounted,
867 and should fix bug #886.
868 kes Apply patch from user brettedgar that allows gnome2-console include
869 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
870 kes Apply patch from Lucien Weller that fixes day of week calculation
871 because of DST flag problem. Fixes bug #887.
873 kes Move find_next_appendable_volume() to after acquiring a valid device
874 in reserve.c. This fixes bug #864 -- confirmed by reporter.
876 kes Unable to reproduce bug 872. However added additional testing for
878 kes Bug #874 resolved by documenting SQLite limitations.
879 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
880 kes Bug #881 resolved by removing typo in mtx-changer script.
881 kes Made Frank Sweetser's wiki the official Bacula wiki with his
882 approval. Added a link to the wiki on the web page, and implemented
883 a backup from http://paramount.ind.wpi.edu
885 kes Fix update allfrompool to pass pool name.
887 kes Convert to pure GPL v2 license.
888 kes Fix sscanf problems reported by Peter Buschman that caused
889 a bus error on Solaris.
890 kes Rework (simplify) the select prompt in bat.
891 kes Move get_jobid_from_tid() into lib and create a
893 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
894 should definitely fix the problem of lost error messages in the
896 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
897 kes Eliminate tcpd.h from the project. Enclose the #include from the
898 library with extern C ...
899 kes Add print of signal name when a signal is trapped.
903 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
905 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
906 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
907 makes SQLit3 run 30 times faster, though a bit less safe.
908 kes Implement --with-batch-insert in configure and detection of thread
909 safe libraries. It is on by default, but turned off if no thread
910 safe library (e.g. SQLite 2) is available.
912 kes Fix Bacula PostgreSQL buffer overruns.
913 kes Do better checking for NULL results returned from PostgreSQL;
914 implement retry for failed queries; clear results buffer after
915 failed query. Hopefully this will correct the PostgreSQL failures.
917 kes Implement algorithm to handle only one appendable volume with
918 Prefer Mounted Volumes = no.
919 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
920 returned from a query.
921 kes Make volume lock recursive.
922 kes Implement an additional volume reservation algorithm that
923 starts by considering all reserved volumes then uses the
924 old brute force algorithm of searching the resources to
925 find a suitable device.
926 kes Add new reservations debug code and refine the old code.
927 kes Update the win32/dll/bacula.defs file.
929 kes Tweak reservations algorithm to permit a few more cases, i.e.
930 volume reserved, but on different drive, ...
931 kes Enhance SD status to include Pool and Media Type for drive in a
932 more readable format (a bit longer).
933 kes Fix PostgreSQL double free.
935 kes Minor refactoring of restore decryption code.
936 kes Add code to smartall.c to detect double free of a buffer.
938 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
939 so that bsmtp will create a correct email address (mailbox only).
940 kes Modify 'memory' command so that the buffers are listed as 'In use'
941 to avoid confusion with Orphaned buffers.
942 kes I reworked the OpenSSL include/lib flags to be handled in
943 the standard Bacula way, which should fix bug #863 concerning
944 non-standard OpenSSL libraries.
946 kes Implement Help Browser window for bat.
947 kes Fix reload bug that reset StorageId to zero.
949 kes Fix TLS #ifdefing when TLS turned off.
950 kes Ensure that when labelling a tape with Slot=0 that InChanger
952 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
954 kes Add StartTime to final uar_sel_jobid_temp query so that we can
955 add DISTINCT (required by PostgreSQL).
956 kes Implement BSOCK authenticate_director() method. Eventually will
957 authenicate all daemons.
958 kes Move several more functions into the BSOCK class.
960 kes Add code to tell the OS that we no longer need a cached
961 file that we were reading. In findlib/bfile.c. Also,
962 only cache files that we are reading. Thanks to
963 Tobias Oetiker <tobi@oetiker.ch> for the idea.
964 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
965 kes Implement script to automatically generate cats and dll .def
967 kes Update README.mingw32 to include new .def file generation.
968 kes Correct typo in UTF-8 error message as reported by:
969 jhernandez <julianhernandez@gmail.com>
970 kes Add additional sm_check() code on debug level 1.
971 kes Set default debug level to 1.
972 kes Trap SIGABRT in attempt to get traceback.
974 kes Reduce bat connect timeout from 30 to 15 seconds.
975 kes More restructuring and implementing BSOCK class in place of
977 kes Remove a few unnecessary malloc() tests in crypto code.
978 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
979 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
980 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
982 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
984 kes Fix Verify InitCatalog. The attributes were not pointing to the
985 correct saved location.
986 kes Implement message callback so that GUI is sure to get all
987 daemon messages. Currently displayed in a dialog in bat.
988 kes Ignore SIGUSR2 (Bacula timer) in bat.
989 kes Apply regress patch from bug #859 to allow regress to work
990 with Solaris compiler.
992 kes Begin adding TLS support to bat.
993 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
994 clean up lex.c and make it more readable.
996 kes Move more bnet functions into the BSOCK class.
997 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
998 kes Complete change of berrno strerror() method to bstrerror()
1000 Release: 2.1.10 beta
1002 kes Cleanup incorrect email addresses in bsmtp.
1003 kes Make bat display initial messages rather than discard them.
1005 kes First cut of adding .mod to the run command.
1006 kes Implement auto display of messages in bat.
1007 kes Enhanced preferences to allow all Bacula output to be
1010 kes Try to make bsmtp date routines more generic.
1011 kes Fixed bug #856 autochanger documentation.
1012 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1013 kes Add new cats entry point so Win32 builds.
1015 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1017 kes Do better checking for the MySQL 64 bit libraries looking for both
1018 .a and .so libraries.
1019 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1020 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1021 kes Require the thread safe version of MySQL during configure. Thanks
1022 to Andre Noll for pointing this out.
1023 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1024 continuing in migration code.
1025 kes Apply implementation of tray-monitor font derived from gnome-console
1026 submitted by Andreas Piesk <a.piesk@gmx.net>
1028 kes Eliminate important memory loss in SQLite
1029 kes Fixed the batch insert MySQL thread specific data that was not
1030 being freed. See cats/mysql.c:db_thread_cleanup().
1031 kes Fix restore before command.
1032 kes Convert old hdr.name to name() in a few places.
1033 kes Implement update jobid command.
1034 kes Return all time_t dates in db_get_job_record()
1035 kes Stop watchdog in SD earlier.
1036 kes Put Pool just after Storage in please mount message.
1037 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1040 kes Update the po files.
1041 kes Fix Verify InitCatalog by making it cache attributes.
1043 kes Change name bacula-bat to bat for man 1 page to correspond to
1045 kes Check for client and store NULL pointers in status command. This
1047 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1048 kes Fix sign extended editing of %p.
1049 kes Clean out a little old #ifdefing in cats/mysql.c
1051 kes If time diff between DIR and FD is more than 600 seconds convert
1052 INFO message to WARNING.
1053 kes Implement heap size display in status for all daemons.
1054 kes Attempt to fix MySQL db open memory loss (not successfull).
1055 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1056 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1057 Query. This looks like a MySQL but but by doing extra releases,
1058 the memory goes away. This should fix bug #847.
1060 kes When backup fails, cancel SD before waiting for sd termination.
1061 kes If SD is waiting for FD to connect during cancel, wake up the
1063 kes Fix fsf code so that errno is correctly reported.
1064 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1066 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1067 so that Bacula doesn't later stumble into a seg fault.
1068 kes Use the term Restore Client in the restore Job report.
1069 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1070 the original job's FileSetId.
1071 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1072 spooling in migration jobs. Not yet tested.
1073 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1074 reading conf file from a pipe. However, do it with open_bpipe()
1075 rather than popen. Not yet tested.
1077 kes Fix an ugly bug where the VolCatBytes were getting updated
1079 kes Implement bconsole memory command that prints current memory
1080 usage, plus smartalloc dump.
1081 kes Clarify some error messages in backup, admin, and migrate.
1082 kes Shrink label dialog to smaller size.
1083 kes Invert Cancel OK buttons on restore to be OK Cancel.
1084 kes More strerror() to bstrerror() conversions.
1086 kes Start implementing bstrerror() in place of strerror().
1087 kes Stripping path -- seems to work.
1089 kes Prevent door and port files from being restored (mostly
1091 kes Free an unreleased buffer in compat code.
1092 kes Change console Job name from *Console* to -Console- to eliminate
1093 Win32 filename problems. Put Win32 path separator when creating
1094 Console file. This fixes bug #846.
1095 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1097 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1099 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1100 to force Win32 error message.
1102 kes First cut strip path. The data should be passed to the FD,
1103 but nothing is done with it yet.
1104 kes Enhance the digest and signature routines in the crypto
1105 library to accept a JCR and to use it to print error messages
1106 so that they will go in the Job report rather than the daemon's
1108 kes Simplify some of the verify signature code.
1109 kes Simplify a few of the alternative returns in the signature
1112 ebl Use only POSIX regex instead of GNU regex in breg.c for
1113 File relocation. It fix broken freebsd compilation.
1114 kes Convert all other Dir files to use new ua class message
1116 kes Tentative fix for missing digest signature in bug 807.
1117 kes Correct handle problem in new win32_ftruncate routine.
1118 kes Convert ua_purge.c and ua_update.c to use new ua class
1119 message routines for bat.
1121 kes Correct incorrect installation of LICENSE in Win32 installer.
1122 kes Display LICENSE at the beginning of the Win32 install.
1123 kes Attempt to correct the need for the png files to be installed
1125 kes Reapply my bat.conf install script in qt-console. I think I
1126 editted bat.pro instead of bat.pro.in and it was lost.
1127 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1128 the /var/lock/subsys for subsysdir. Also corrects typos in the
1131 kes First cut update job.
1132 kes Correct configure to include qmake of src/qt-console directory.
1134 kes Make restore job yes/mod/no print in one command so GUI works.
1135 kes First cut implementing backup and restore client.
1136 kes Correct editing in Verify output that caused a seg fault.
1138 kes Insure that bat.conf is not overwritten during installation.
1139 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1140 while I was implementing migration in March 2006 !
1142 ebl Cleanup file relocation, using char *RegexWhere instead of
1143 char *where + bool where_use_regexp
1144 kes Update some manpages and add bat manpage.
1145 kes Make a first cut at converting bacula.spec.in for bwx-console
1147 kes Apply patch from John Goerzen to add hostname as fourth argument
1148 to make_catalog_backup script.
1149 kes Fix typos I introduced into bsmtp.c
1150 kes Make pm_strxxx() routines handle input of NULL pointer. This
1151 is to protect from NULL pointers returned from SQL databases.
1152 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1153 kes Add more debug to FIFO code -- fix fifo regression test.
1155 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1156 kes Add thread timer to bnet_connect() to break from OS if wait time
1159 kes Update Win32 build to include new files, new symbols, and
1161 kes Implement socket level heartbeat (tcp_keepidle)
1162 ebl Commit File relocation patch
1163 kes Make bat have 'make install' target.
1164 kes Warn during install if old gnome-console binary found.
1165 kes Warn during install if old wx-console binary found.
1166 kes Add -8 option to bsmtp command line to add content type utf-8.
1167 Fixes bug #809. (Character coding problem in bsmtp).
1168 kes If < is found in target (from, to, cc) then do not enclose the
1169 target in < > in bsmtp. Fixes bug #772 (malformed address).
1170 kes When printing certain items in dbcheck, stop after 300000.
1171 Fixes bug #822. (dbcheck loops).
1172 kes Incorrect status in Dir after waiting for mount with poll set.
1175 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1177 kes Print waiting to reserve a device every 5 mins.
1179 kes Don't call close_part in label.c if tape and relabel.
1180 kes Don't free volume if busy in close() -- should help with
1182 ebl Fix #824 RunScript bug (After script could be execute twice)
1183 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1184 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1185 Add a regression script to test RunScript
1187 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1190 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1191 deprecated. No additional bugs will be fixed, and they will be dropped
1192 in a future release (probably 2.4.0).
1193 kes Change name of wx-console to bwx-console to make it more Bacula
1195 kes Change the name of gnome-console to bgnome-console to make it
1198 kes Some time in March, a Feature Request with patch from Jorj Bauer
1199 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1201 The ability for the director to validate a Client (FD) CN against
1202 an arbitrary set of patterns rather than the hostname, with
1203 A new 'TLS Allowed CN' set of directives which are implemented
1204 in the Client resource. Then pattern matching is used in place
1205 of hostname matching against the Certificate's CN. As an example, we
1206 have certificates which (a) use a local CA, and (b) have a CN of the
1208 kes Add new/changed entry points to Win32 build
1209 kes Create unaccepted-projects for projects that are not accepted.
1210 kes Simplify locking in the reservations system.
1211 kes Add more debug code in reservations.
1212 kes Make sure error condition on reserving a volume is handled correctly.
1213 kes Correct handling of volume_in_use.
1214 kes Correct handling of initializing a device.
1215 kes Move handling of broadcasting releasing a device into release_device().
1216 kes Correct attaching dcr to dev so that it is only done if device
1217 is properly initiated.
1219 kes Locking debug level tweaks in SD.
1220 kes Tweak new Volume code.
1222 kes Add exec external-command [wait-seconds] to bconsole. This
1223 executes the external-command. Note! normally external-command
1224 should be enclosed in double quotes.
1225 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1226 it should normally be off in a production system.
1228 kes Implement die command for SD so that we can force it to dump.
1229 kes Implement SD lock debug code.
1230 kes Implement new algorithm for keeping Volume list in SD. It
1231 is now owned by the device.
1233 kes Implement new code for freeing in use volumes that should
1234 resolve if not all, some of the problems of multiple drive
1235 tape conflicts described in bug 801.
1237 kes Fix gui/bacula-web/images files in svn.
1238 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1240 ebl Fix a bug in batch mode (in string escape)
1241 kes Correct migration prune SQL typo that crept in in a
1242 recent 2.1.x change.
1244 kes Move bnet_despool() into class in bsock.c
1245 kes Modify job report to include director name and Build OS.
1246 kes Move drop root privilege and check_catalog() before fork.
1247 kes Add update database scripts (version 9 to 10) to updatedb directory.
1249 ebl Check size and age of each file after its backup to see if
1250 it has changed during backup, if 'checkfilechanges' is set.
1251 The FD will do an extra check (stat(2)) after
1252 each file backup. mtime, ctime and size are compared with
1253 'before backup' information. If time or size mismatch, an
1254 error message will be generated. You must upgrade FD to use it.
1256 kes Make database name and user configurable
1257 --with-db-name=xxx --with-db-user=xxx
1258 kes Add back database type to message.c for debugging.
1260 kes Implement dir_sql() which issues an SQL query.
1261 kes Modify bat medialist to use dir_sql() and do some minor C++
1262 formatting as well as eliminating a number of pointers, simplifing
1265 kes Fix some of the mtx-changer grep commands for tape label readers.
1266 kes Convert a number of bsendmsg into the appropriate send/warning/error
1267 message class calls.
1268 kes Suppress the using database message in the .sql command.
1269 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1271 kes Add context menu for floating a window.
1272 kes Some minor cleanup and name changes in qt-console
1273 kes Add doing mt setblk 0 in Win32 mtx-changer.
1274 kes Apply Martin's bug fix to move definition of ENODATA for
1276 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1277 sqlite2 and sqlite3.
1279 kes More pruning cleanup.
1280 kes Turn on wait_for_drive by default in mtx-changer.
1281 kes Turn on Batch insert code by default as it now passes regression.
1282 kes Add ./configure --enable-bat to enable building of Bat.
1283 No install yet though.
1285 kes Implement a new .sql command for bat.
1286 kes Implement code to turn off pruning in obtaining the next volume.
1287 Pruning is turned off for the status dir command, but turned on
1288 for SD requests and for the list nextvolume command.
1290 kes Correct Qmsg() that was not updated correctly when committing a
1291 previous change (probably the recent TLS patch).
1293 kes Write new subroutine is_volume_purged() that explicitly checks
1294 if the Volume is purged, and if so marks it as such. This should
1295 resolve problems reported about needing to mount twice to recycle
1297 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1298 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1299 amount of duplicated code.
1300 kes Do volume pruning only for the Media Type desired (reduces pruning time
1301 if multiple Media Types are in the same pool).
1302 kes Implement more detailed info in the Job report for the Bacula version
1304 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1306 ebl Add bbatch tool to bench database and insert mode.
1307 Fix sql quote stuff in batch mode
1308 Fix sql stuff for mysql
1310 kes Correct problems with am/pm scheduling. Fixes bug #808.
1311 kes Implement new prunning code that prunes up to 1000 jobs at
1312 the same time. The same technique can be applied to a number
1313 of other prune/purge subroutines.
1314 kes Add an insanity check when starting a new tape job to ensure
1315 that the tape position has not been changed. If so fail the
1317 kes Fix Win32 build for dlls to add the folllowing:
1318 src/lib/bsock.c -- new file with new entry points
1319 src/lib/dlist.c -- new entry points
1320 src/cats/sql_create.c -- new entry point
1321 src/cats/sql_cmds.c -- new DATA item exported
1323 ebl batch mode cleanup bscan-test is ok now.
1324 kes Implement SD code to check length of disk volume before appending.
1326 kes Correct return status on db_batch... routines.
1327 kes Add call to db_write_batch_file_records() to migration code.
1328 ebl Fix AfterJob timing
1329 kes Move the checking of the database in initializion of the Director
1330 to after we drop privileges. This avoids the need for both root
1331 and bacula access to the DB.
1332 kes Correct a misplaced variable definition in src/filed/backup.c
1333 kes Correct how the new batch insert db_create_attributes_record()
1334 uses the arguments. Caused a seg fault in bscan.
1335 kes Implement lock() and unlock() methods in DEVICE class.
1336 Implement block() and set_block(xx) methods in DEVICE class.
1337 kes Modify bnet_connect() so that it uses time() to check for the
1338 wait time expiring (on some OSes, some system calls may not
1339 return immediately).
1340 kes Modify Verify to obtain the previous JobId when it is actually
1341 running rather than at schedule time (as it was in 1.38.x).
1342 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1344 kes When checking pid in pid file, continue running if the pid is
1345 the same as ours. This occurs on IRIX after a system crash.
1348 kes Extend new GUI API.
1349 kes Make the ua structure a class, and implement send_msg(),
1350 error_msg(), warning_msg(), and info_msg().
1352 kes Apply fix from for building wx-console on the Mac from
1354 kes Implement new select mechanism for GUI programs.
1355 kes Reorganize initialization of stackedWidgets in bat.
1357 kes Add updated nagios plugin supplied by Christian Masopust.
1359 kes More bat implementation.
1360 kes File migrate bug with Pool Occupancy using mediaid instead
1361 of jobids. Fixes bug #795.
1362 kes Fix orphaned buffers in filed backup and verify due to
1363 crypto buffers not freed during errors. Fixes bug #789.
1364 kes Extend new GUI api code to tree commands.
1365 kes Ensure that tree and dot commands check console ACLs.
1366 kes Permit marking directory with trailing slash.
1367 kes Allow 20 console connections (instead of only 10).
1369 kes Add smartctl call to bacula-sd.conf as an example of getting
1372 kes Modify jobq.c to let simultaneous restore jobs run. This may
1373 cause them to fail if they cannot get a drive.
1374 kes Add Client Connect Wait to Storage daemon to permit users to
1375 modify the time the SD waits for a FD connection.
1377 kes Correct virtual changer check which was backwards. This caused
1378 volumes to be unloaded into slots already occupied.
1380 kes Apply Command ACL filter to JobId list in restore command.
1381 kes Correct typeo in var.c patch.
1383 kes Don't let Bacula prune File or Job records for the current Job.
1384 kes Fix variable substitution pad + inc bug reported (with patch)
1387 kes Correct SQLite log table index as reported by Luca Berra.
1389 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1391 kes Begin implementing new comm signals for API.
1392 kes Fix a few places in lib/message.c where the open fd may
1394 kes Continue implementing lib/bsock.c (real class). Make jcr,
1395 who, host, and port private. There are new methods to access
1396 them for non-class use. This required touching a number of files.
1398 kes Add LANG=C to autoconf/randpass so it works with languages other
1399 than English. Fixes bug #788.
1401 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1403 You will not be able to generate Include/Exclude list any more.
1404 It will be fixed soon.
1405 If you want to use this, you can apply
1406 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1408 kes Restore of sockets created false error messages because Bacula
1409 no longer restores sockets, but the code was still trying to
1410 set the attributes on a non-existent file. Reported by a user.
1411 ebl finish RecyclePool feature
1412 Media will takes Pool.RecyclePool
1413 when moving from Scratch to a Pool or when user will do
1414 update volume=xxx frompool
1415 To use it, add RecyclePool = aPool to your Pool resource
1418 RecyclePool = Scratch
1422 kes Expand new BSOCK class adding signal() and new BNET signals.
1423 kes Begin enhancing the dot commands adding a new API function
1424 that returns more information and will make it easier
1425 to interface to the Director from a program.
1427 kes Make DEVICE fd private. Its new name is m_fd, and can be
1428 obtained with dev->fd() outside the class. This is the
1429 first of many DEVICE members to be made private.
1430 kes Implement Michael Renner's idea on having a virtual disk
1431 changer. I made some minor modifications (e.g. I did not
1432 implement the Virtual Changer directive, but simply set
1433 the Changer Command to an empty string.
1435 kes Implement a BSOCK send() method that writes the whole record
1436 in a single write() request rather than in two.
1437 ebl add update volume=xxx recyclepool=yyyy
1438 volume takes recyclepool from pool when using update volume=xxx from pool
1440 kes Fix encryption deblocking bug, which caused some restored files
1441 to be truncated. This fixes bug #763.
1442 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1443 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1445 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1446 ebl Use btime_t instead of uint64_t in media patch.
1448 kes Optimize the use of the database a bit in the Status dir command.
1449 Only open it when needed, ensure that if any previous database
1450 was opened, it is closed.
1452 kes Correct VolCatBytes bug from media patch.
1453 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1454 in the case of orphaned records.
1455 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1456 and File records in 300K chunks to be more efficient. This
1457 idea came from Juan Luis Frances (if I remember right).
1458 kes Apply Eric's scratch patch that moves a purged Volume to
1459 the RecyclePool. Question: how is RecyclePool set? what
1460 happens to the ScratchPool?
1461 kes Apply Eric's media patch that collects read/write media
1462 times as well as byte counts. This patch requires a
1463 simultaneous upgrade of the DIR and SD. Note, there
1464 should be some way to turn off timing. I'm not sure
1465 times are in Bacula units.
1466 kes Apply Eric's batch-insert patch.
1468 kes Update projects list.
1470 kes Implement Include/Exclude file lists in FD as dlists using
1471 the new dlistString class. This permits efficiently having
1472 large include/exclude lists and completes project Item 25.
1473 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1474 console is authorized to cancel the job. This fixes bug
1476 kes Modify SD so that the VolCatJobs medium record is updated
1477 at the beginning of a Job rather than the end. This
1478 fixes bug #775 where exceeding MaxVolJobs caused jobs
1480 kes Added a mutex around getting and setting Volume information
1481 so that multiple simultaneous jobs will single thread.
1483 Switch to using Subversion
1484 kes Remove src/pygtk-console/ from configure
1486 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1487 plus the entrypoints.
1488 kes Apply patch supplied that corrects debug print
1489 in canceling jobs for max run time. Supplied as
1490 part of bug #621, which was previously fixed.
1492 kes Test on job_canceled() and sd_msg_thread_done inside
1493 loop starting the message thread to avoid a race condition.
1495 kes Remove rl_catch_signal from console.c as it conflicted
1496 with the header definition. Fixes bug #765.
1497 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1499 kes Clarify some stored/acquire messages to indicate if the
1500 problem is with read or append.
1502 kes Fix memory leak with storage ids in cats/sql_get.c
1503 kes Terminate watchdog earlier to avoid reference to released
1504 memory -- reported by Jason Austin.
1505 kes Move closing the database from jobq.c to the director daemon
1506 termination routine. This fixes memory leaks for shadow jobs
1507 (i.e. migration jobs).
1508 kes Free up the unique jobid chain items in migrate.c. This fixes
1509 a memory leak problem.
1510 kes Convert some ugly looking for statements to use foreach_alist
1511 in findlib/find.c. This will facilitate converting the structures
1512 to use dlist (for large include/exclude lists).
1513 kes Fix a bug in the btree.c and btree.h routines, then rename them
1514 rblist and add them to be built in src/lib. Include some new
1515 methods written by Rudolf Cejka that make the code more readable
1516 (hides some of the ugly casting).
1517 kes Add set_next() and set_prev() methods which make the code much more
1518 readable. Also add a new dlistString class that facilitates storing
1519 strings in dlists. To be used in the large include/exclude lists.
1520 kes Make some trivial modifications to lib/tree.h that use rblist
1521 rather than dlist for storing the tree links. This was suggested
1522 by Rudolf Cejka. The result of this is that the restore tree now
1523 uses red-black binary trees rather than simple linked lists. This
1524 should give rather dramatic speed improvements for directories
1525 contining large numbers of directories/files (more than 10000).
1527 kes Fix maxruntime bug #621.
1529 ebl Implement the include JobID in spool file name project.
1530 kes Reorder projects file in order determined by Jan 2007 vote.
1531 kes Implement item #12 on project list -- quick release of FD by
1533 kes Fix open of SQLite3 db where user does not have write permission
1534 so that DIR does not crash. Fixes bug #761.
1536 kes Add back missing @ in Win32 Makefile.
1537 kes Change 'Device not configured to autolabel' from INFO
1539 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1540 which should restart an indefinite # of times.
1541 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1542 other DIR specifications.
1544 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1545 Fix path quoting in SQLite scripts.
1546 Fix problems with SHGetFolderPath.
1548 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1550 kes Fix Job restart on error bug that promotes an Inc to a Full
1551 backup. This should fix bug #755.
1552 kes Add qt-console and first cut of code.
1556 kes Fix Bacula->Documentation link on Win32 to point to index.html
1557 instead of bacula.html. Fixed bug #750.
1558 kes Return JobId in db_get_job_record() when JobId==0. This should
1560 kes Do not release source pointers when restarting a failed job.
1562 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1563 This *should* fix bug #747.
1564 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1567 kes Modify USTORE constructor to set an empty store_source string,
1568 and don't copy the store_source string in a cancel. Hopefully
1569 this will fix Arno's seg fault, bug #744.
1570 kes Add back code to disable conio in configure. Fixes bug #743.
1571 kes Correct the Options scanner in the FD to correctly handle
1572 SHA1 option, which was eating the next option. Reported by
1574 kes Add code to indicate when the SD is spooling, spool wait, and
1575 despooling as requested by Alan Brown.
1577 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob