1 Technical notes on version 2.3
5 kes Pass jcr to tls routines so debug messages can be handled better.
6 kes Rework jobq resource allocation code, and possibly fix a bug
7 that caused reference counts to get out of sync.
9 kes Rename fd/dir plugin to use Bacula standard underscore.
10 kes Plugin work -- bring dir up to fd level.
11 kes Start implementation of VTL code
12 kes Fix Win32 build after adding new cats subroutine.
14 kes First cut at Duplicate Job implementation.
16 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
17 kes Start PluginOptions string, and refactor a bit of ua_run.c
18 ebl Apply Allan patch that permit to reset recyclepool.
20 kes Test patch -- possible fix or improvement for bug #1053
21 kes Refactor FD and SD status commands to permit new API code in
22 SD, and to fix Win32 build.
23 kes Win32 build is now working.
25 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
26 some ideas in patch from Scott Bailey.
27 kes Begin implementation of duplicate Job control.
28 kes Fix some of Win32 build after recent additions.
29 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
30 which causes the FD to detect whether or not the OS has the
31 honor no dump bit (*BSD systems), and if so, to skip backing up
32 any file with this bit set. The feature is enabled by setting
33 'honor no dump flag = yes' in the Options section of a FileSet.
35 kes Correct po warning message with datarootdir
36 kes Implement more code in dird.c to put configuration parsing in
37 a class rather than use globals.
38 kes Restructure SD status command for implementation of bat API
41 kes Suppress incorrect 'Will not descend from x into y' messages.
42 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
43 daemon globals used by parser.
44 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
46 kes Fix free of plugin_list when none exists.
48 ebl Apply accurate project patch.
50 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
51 on non-mempool object)
52 kes First cut of converting FD .status to work with bat API.
54 .status client=XXX header
55 .status client=XXX running
56 .status client=XXX terminated
57 kes Implement first cut of Copy Job.
58 kes Implement Catalog in Pool resource. It overrides catalog specified
59 in the Client resource.
61 kes Apply patch (with some difficulties) from Joao Henrique Freitas
62 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
64 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
65 ftruncate() actually works. In the case of some (cheap) NAS devices,
66 it does not, and so recycling NAS Volumes does not work. The code
67 simply unlink()s the file, then recreates it. This fixes bug #1011.
69 kes First incomplete cut of big malloc blocks for htable.
70 kes Tweak plugin code.
72 kes Plugin debug code + tweak a couple bat dialog layouts
74 kes Fix creating first JobMedia record during Migration to include
75 proper index. This caused slow restores of migrated jobs.
76 kes Temp fix to plugin name file_index.
77 kes Bacula backed up and restored a MySQL database.
79 kes Implement plugin restore.
80 kes Implement parsing of db_driver to give db_type index.
82 kes First cut of plugin restore code.
83 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
84 and do not strip paths on symbolic links.
85 kes Set catalog backup database and user name from values specified on
87 ebl Fix #1031 about wrong pool source information in job report.
90 kes Remove a redundant jcr argument to find_files, match_files, and
92 kes Implement '.status dir header|scheduled|running|terminated' that
93 prints the requested status section. With the exception of the
94 header, the other reports have fields separated by tabs (\t).
96 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
97 a resource embedded run command to find a since time if no explicit
98 since time was supplied on the command line.
99 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
100 that updates the state file at job termination time in addition to
101 when the daemon terminates.
103 kes First version where a plugin did a backup.
104 bpipe-fd.so created a backup file, wrote a test
105 string to it, and Bacua could restore this fabricated file.
107 kes Implement DB Driver = string for the DBI driver.
108 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
109 kes First cut of code for loading Win32 plugin dlls. Implement
110 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
111 and implement a dlfcn.h file based on opengroup's definitions of
114 kes First cut plugin directives.
116 kes Apply patch from bug #1049 to prevent stripping the path on a
118 kes Attempt to fix bug #1047 where stripping a path corrupts the
119 heap. Waiting for feedback.
120 kes Correct the Mount message not to suggest labeling a new tape
121 when doing a restore. Submitted by email by John Stoffel.
122 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
123 FD by using casting. Reported in bug #1042.
125 kes A bit of crypto cleanup. More later.
127 Release Version 2.2.8
129 kes Apply patch from Martin to correct bug #1040, bscan sets existing
131 kes Fixed important spelling error in doc -- bug #1045.
133 ebl Fix bextract to be able to extract non-portable Win32 data to
135 kes Move initialization of read/write res lock earlier in the code.
136 This fixes the crash with a null conf file. This fixes bug
138 kes Redefine CURES in lib/parse_conf to be URES and move it all
139 into lib/parse_conf.c -- this responds to bug #1042, but does
140 not fix it. The fix is not to compile with FORTIFY_SOURCE.
141 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
142 the trunk SVN. I don't think this was reported as a bug.
144 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
146 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
148 kes Add DataDespooling and DataCommitting status (committing is
149 the last despooling).
150 kes Finish implementation of new reservations code noted below.
152 kes Fix bsnprintf for float point numbers. I broke recently when
153 parameterizing some variables. This fixes bug #1036.
154 kes Undo recent reservations changes ... will apply them later
155 when they work better.
157 ebl Fixes #1034 which cause mysql to hang the connection after 8h
158 ebl Change default statistics target of filename.name and path.path
159 fields for PostgreSQL. This speeds lookup by indexes. Thanks
161 kes A few more tweaks to new reservation code. Make sure to clear
162 vol released flag when retaking volume. When reading label and
163 label is bad mark volume unused. When recycling, mark volume
164 unused so it can be renamed.
166 kes Fix reserve_volume() so it doesn't release a volume in use
167 (i.e. a volume entry not marked released). This should be
168 the last part needed to fix bug #1018.
170 kes Move Heartbeat documentation from Job to Director resource.
171 This fixes bug #1033.
173 kes Fix existing switch drive SD code to call autochanger to release
174 any old volume. This must be done to keep the autochanger from
175 releasing subsequently newly reserved volumes in doing a close().
176 This should fix bug #1018.
177 kes Fail if attempting to get console input in batch mode. This
178 should help fail RunScript console commands that are incomplete.
179 kes First cut implementing switch_drive() in SD (not actually called).
181 kes Implement first cut running console commands in a RunScript.
183 ebl Fixes bug #1028 where 'Selection Type' option was not usable
185 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
188 Release Version 2.2.7
190 kes Add new free_tls() entry point so that Win32 builds.
191 kes Fix compile warning in src/lib/util.c
192 kes Fix entry point for edit_job_codes() so that Win32 builds.
193 kes Fix seg fault Frank Sweetser reports in regression testing
194 on his systems. The problem was that the original author of
195 bsnprintf.c did not take into account the side effects of
196 using ++x in the argument to a #define.
197 kes Make SD protocol backward compatible with version 2.2.x.
199 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
200 because Bacula no longer restores sockets.
201 ebl Always use ignorecase fileset option on win32 FD.
203 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
204 that implements double quoting include names in conf files,
205 and also allows piping input by having the first character
206 be a vertical bar (|).
207 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
208 that implement %f in RunScripts to pass the FileSet name.
209 kes Skip leading | when lex input comes from a pipe as suggested
210 by Michael Stapelberg <michael@stapelberg.de>.
212 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
213 Nerijus Baliunas <nerijus@users.sourceforge.net>
215 kes Implement Plugin Directory and plugin events.
217 kes Implement a security enhancement: TLS authentication but no
218 encryption. Enabled by setting 'TLS Authentication = yes'.
219 Note when this is on, TLS encryption is turned OFF!
221 kes This patch corrects a problem where the maximum concurrent storage
222 jobs counter gets out of sync during restore jobs causing jobs to
223 'wait on max Storage jobs'. This patch fixes bug #1009.
225 kes This patch fixes bcopy so that it produces correct Volumes.
227 kes This patch eliminates spurious output to the console during a VerifyVolume
228 job that contains encrypted data. It fixes bug #1024.
230 kes This patch prevents the 'status dir' command from trying to use a scratch
231 volume and possibly moving it from one pool to another. This patch fixes
234 kes Add new include to postgresql.c suggested by Marc Cousins so
235 that it compiles correctly with pgre version 8.3.
237 kes Fix --archivedir addition to configure. Replace it with
238 --with-archivedir in configure.in This fixes the regression
240 kes This patch fixes bug #1012 where the job is canceled because
241 of Max Run Time exceeded when the job has not yet started.
243 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
244 one 'part' to write. Instead of each part being stored on disk,
245 written to DVD, then deleted from disk, all parts are written to disk,
246 and only the last is written and deleted from disk.
247 kes This patch fixes the status command to include the formating string for
248 JS_AttrInsterting. It fixes bug #1021.
249 kes This patch should fix the Mac OS X build problem on the latest
250 Darwin, where sys/types.h was not included correctly (apparently
251 due to a change in the Mac headers). The solution was to explicitly
252 ensure that it is defined for the ./configure.
253 This patch also has a rebuild of configure that includes the Debian
254 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
255 kes This patch should ensure that queued messages to the console are
256 displayed as soon as possible. It should fix bug 1007, but has been
257 reported not to work.
259 kes This patch fixes the infinite loop when trying to increase the
260 maximum number of volumes in a Pool during the add command.
261 This patch fixes bug #1008.
263 Release Version 2.2.6
265 db Remove extra data on estimate command in joblist for bat.
267 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
268 really change anything, but is the beginning of doing it *right*.
269 To do it completely right the LastWritten date must be passed to
270 the SD, but it is not yet done.
271 kes Minor tweaks to some bat restore SQL.
272 kes This patch fixes bug #1003 where putting the message output from
273 a Verify job into the catalog results in a recursive loop. The problem
274 seems to show up only with postgresql (to be verified).
275 kes Correct %x to %p in postgresql debug statement.
277 kes Fix bug #942 where lots of emails where generated when the heartbeat
278 interval was low and Bacula wanted a different tape from the one in
281 ebl Add new SD despooling attributes and Dir inserting attributes
282 job status codes in the catalog (Status table).
284 ebl Use qmake-qt4 instead of qmake when available (debian system).
286 kes Add a security warning to src/cats/make_catalog_backup.in indicating
287 that passing the password via the command line (arg 3) is insecure.
288 This responds to bug #990 (it doesn't fix it).
290 kes Set default debug_level to zero. This corrects bugs #991 and #993.
291 kes Fix a crash in bat when it cannot connect to the Director for example
292 if the Director is not running.
293 kes Remove redundant INDEX (JobId) from File table in the trunk.
295 kes Make explicit exception to GPL in LICENSE to permit linking
296 the Win32 FD with Microsoft VSS code.
297 kes Apply the Solaris package patch from
298 Masopust, Christian <christian.masopust@siemens.com>
299 kes Apply the patch to optionally add a timestamp in the debug output
300 submitted by Mariusz Czulada <manieq@wp.eu>.
302 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
303 backend (sql_strerror). Fixes bug #989
305 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
306 It applied with no problems.
307 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
309 kes Redirect stderror to stdin on mt status command in mtx-changer.in
310 since the status is returned on stderr on Solaris.
311 kes Activate Close button on tray-monitor window. This fixes
313 kes Check for NULL item in parse_conf.c before calling it. In the
314 case of Device, there is no item and this caused a seg fault when
315 Device appears in the conf file.
316 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
317 avoids pulling in config.h multiple times in some new code.
319 kes Fix spurious warning message printed when creating a volume with
320 a LabelFormat. This fixes bug #976.
322 Release Version 2.2.5
324 kes Add JobId in place of Job name in all the Jmsg() output.
325 kes Correct the APP_DESC for the Win32 storage service (remove an e).
327 kes Make maxvol-test and new more strict maxvol2-test work.
328 kes Print JobId in all Jmsg() job output.
330 kes Add new SD despooling attributes and Dir inserting attributes
331 job status codes. This fixes bug 961.
332 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
334 kes Fix doc issue. This fixes bug #963.
335 kes Fix listing performance problems in bat. Pointed out by
337 kes Remove old debug code.
338 kes Fix bat code that tests for Win32. This should fix bug #968
339 kes Query 5 list wrong Vol after migration. This fixes bug #960
341 ebl Fix #969 where user can't change Replace option in restore menu.
343 kes Save jcr in thread specific data (tsd) for each thread.
344 kes Make Dmsg() print JobId as -%u.
345 kes Make Jmsg, Emsg, and others automatically pickup the jobid
346 for the thread if it exists.
347 kes Remove old reservation debug jid code.
348 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
349 ebl Add an option that permit to specify spool size in job
350 definition. (Applying patches/testing/spoolsize_per_job.patch).
351 You must upgrade SD and DIR at the same time.
352 dvl Add new configuration item --archivedir
353 dvl Adjust regression tests to use tmp not /tmp. This will allow
354 multiple concurrent runs of the regression tests.
356 kes Fix race condition that drops final block written to volume.
357 This happens in rare cases with multiple simultaneous jobs
358 when the Volume fills. This fixes bug #964. May be related
359 to bug #935 and possibly #903.
360 kes Eliminate more strerror() and replace with bstrerror().
361 kes Remove BSD getopt and replace with unrestricted IBM version.
362 kes Fix Win32 build for changed calling sequences.
363 kes More tweaks to the mount volume routines to get everything
364 right. Changed variable name from find to have_vol, which is
365 much easier to understand.
366 kes Enhance btimer debug code.
368 kes Fix FD->SD authorization failure, which was due to spurious
369 wakeups from a pthread_cond_timedwait(). Simply check the
370 predicate before continuing. This fixes bug #953.
371 kes Add const char where needed (more to do). Remove temp debug code.
373 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
374 kes Don't overwrite error message in check_tables_version.
376 kes Unlock batch insert tables with same calls used elsewhere.
377 kes Allow starting 59 jobs a second.
378 kes Make SD session key more random.
379 kes Add retry for SQLite opening db if it fails. Probably helps
381 kes Suppress extra error messages during batch insert failure.
383 kes Add jcr to timer packets so if killed message can be sent to job.
384 kes Add JobId to all Dmsg() output.
385 kes Put some FD auth code on dbglvl rather than fixed.
386 kes Return insert attributes error message in db msg buffer to avoid
387 false error messages. Helps fix bug #966.
388 kes Separate batch init error messages. Probably helps fix bug #966.
389 kes Make SD code that contructs attribute insert check string lengths
391 kes If Dir gets an error during inserting attributes, cancel SD.
392 This reduces unnecessary error messages.
394 kes Correct search boolean for getting Volume info
395 ebl Cleanup batch insert code. Probably fixes bug #965.
396 kes Back out one small change to the reservation system (reserving a volume).
397 kes Rework how a Volume is mounted. It is now much more intelligent and
398 will always attempt to use any mounted volume if possible and reduces
399 calls to the Director asking about volumes.
401 kes Turn off some code when batch insert not enabled.
402 kes Edit FD name in connect error messages.
403 kes Rework the reservation system to take into account that the Director
404 might give us a Volume that is different from the current one being
405 used, and to ensure that we don't exceed Maximum Volume Jobs.
406 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
407 fatal error with multiple jobs running'
408 kes Add more debug code in reservation system.
409 kes Implement maxvol-test to check bug #947.
411 kes Add code to handle tray monitor separated from Win32 FD.
412 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
414 kes Add missed return in fixing verify bug -- trunk only.
415 ebl Fix a command parser issue causing a director segfault.
416 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
418 kes Increase the max block size to 4MB fixes bug #957.
419 kes ERABT if user sets min block size > max block size. Fixes bug #956.
420 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
421 is not properly mounted (recognized) during a poll.
422 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
423 Job that has differences reports Verify OK.
424 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
426 ebl Add an option to operate on all pools with update vol parameters.
427 This complete the project 20. Patch from Nigel Stepp.
428 ebl Add history support to bconsole when using readline.
429 Using Ctrl-D to exit doesn't update .bconsole_history
430 kes Modify new volume algorithm to use max MediaId for generating next
431 volume number rather than the count of Volumes. This should essentially
432 eliminate the failure rate if some volumes were deleted. Bug #921.
433 kes Begin implemention of Optimize Job Scheduling.
434 kes Implement restore callback that Dirk and I agreed on for bat
435 restore. This fixes bug #928. Restore of backup of zero files fails.
436 kes Fix SQL Catalog logging which broke with new db_escape_string
439 Release Version 2.2.4
441 kes Fix bacula_cats.def for new db_escape_string().
442 kes Increase size of name string when FD making connection to SD.
443 May fix bug #953. FD->SD connection failure.
445 kes Add code to help Dan debug 2drive-incremental-2disk test.
446 kes Add code to try to fix bug #908.
447 kes Add waits to multiple exit detection code to try to force pid
448 file to always be deleted.
449 kes Restore good dev.tar.gz to rescue set appropriate binary property.
451 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
452 trying to switch drives by checking for blocking before unblocking.
454 kes Cancel storage daemon in all cases where FD reports error. This
455 should fix virtually all cases of bug #920.
456 kes Fix db_escape_string() for MySQL which did not compile.
458 kes Fix error message that was clobbered when Dir tells SD it does not
459 have write permission on Volume. This should fix a minor point
460 in bug #942, but not the main problem.
461 kes Add code to cancel job in SD if FD connection fails. This should
463 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
464 dvl Pass jcr and db into db_escape_string() to enable better escaping
466 kes Fix migration code to get correct Volume name with multiple volumes
467 by skipping |. Fixes bug #936.
468 kes Implement patch supplied by Landon to fix bug #944 where using
469 TLS with bconsole uses 99+% of the CPU.
470 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
472 kes Move patches into patches directory.
474 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
477 ebl Using 'm' in bconsole will show messages like before,
478 and not memory usage.
479 kes Fix bug #935, and probably also bug #903 where files were not
480 restored. MediaId was not properly set in JobMedia record after
483 kes Suppress chown and chmod error messages if the FD is not running
486 kes Apply Martin Simmons' patch that should turn off the new API usage
487 when batch insert is turned off allowing building on older
489 kes Add ./configure search in qwt-qt4 for qwt package
491 kes Bacula is now free of 3rd party GPL copyrighted code!
493 kes Add guid_to_name.c/h which replace idcache.
494 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
496 ebl Detect if new PosgreSQL batch insert API is present.
497 kes Correct incorrect mempool call causing Director crash. Occurs on
498 systems without va_copy().
499 sb Update spec files for 2.2.1 release
501 kes Fix memory pool call in ua_output.c. bug #934.
502 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
503 Add test program to fnmatch.c
505 kes Integrate patch to README.vc8 from
506 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
507 edit it to get it into Unix patch format.
508 kes Implement mkpath.c to replace old FSF makepath.c
510 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
512 Release Version 2.2.1
514 kes Update POTFILES.in
515 kes Cleanup a few underquoted AC_DEFUNs in configure
516 kes Apply patch from Martin Simmons that adds a test for va_copy to
519 kes Fix bug #921 by increasing the number of tries to create a new volume
521 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
522 can be called multiple times. Implement a version for machines
523 without va_copy() that gets a big buffer.
525 kes Integrate more portable zone offset code into bsmtp.c
526 Submitted by Attila Fülöp.
528 kes Fix bad SD->FD return status reported by
529 (James Harper) <james.harper@bendigoit.com.au>
530 ebl Fix a bug in read_close_session which return random status
531 thanks to James Harper
533 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
534 and directory names during restore of single file/directories.
535 kes Add sanity checks to .sql command when string is empty. Hopefully
536 that will resolve Dirks Director crash.
538 kes Apply patch submitted by Martin Simmons that corrects a seg fault
539 in the bsmtp chat subroutine when debug is >= 10.
541 kes Fix Director crash when running bat SQL queries.
542 kes Add David's notes on Item 8: Copy pools.
544 kes Rework projects file to be current and ready for a vote.
545 kes Enhance lex scanner error message.
547 kes Tweak LICENSE file to mention BSD code.
548 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
549 if specified on the ./configure.
550 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
551 This class is intended to allow us to open a second bsock to the
552 Director while in the restore subdialog.
554 kes Fix configure to create bat Makefile before creating dependencies.
555 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
556 kes Add a tooltip to the tray monitor.
557 dvl Set the Director's PID file before dropping privs. This fixes
560 kes Update AUTHORs file
561 kes Increase the default max concurrent jobs to 20 in FD and SD to
562 correspond with the default .conf files.
563 kes Rewrite the Win32 service routines. This eliminates the 3 copies
564 some different, of the same file created by RN when porting the
566 kes Rearrange some of the Win32 directories and the placement of the files
568 kes Set DEVELOPER flag in version.h
570 ========================================================================
571 Release Version 2.2.0
573 kes Apply a second doc patch from Marc.
574 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
575 improves the tips section that discusses how to setup multiple
578 kes Update bat README file.
579 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
580 corrects a typo in the Recycle status check in db_find_next_volume().
581 This will probably fix a number of annoying problems with multiple
583 kes Modify most of dird/msgchan.c to use bsock class calls rather than
584 bnet calls -- no functionality change.
586 kes Modify the Verify output to specify if files are missing on
587 the Volume(s) or disk. Fixes confusion in bug #916.
588 kes When more than one Volume is read in a migration job, the last
589 Volume bytes reported are from the last read volume rather than
590 the last written volume. Fixed. This fixes bug #910.
591 kes Fix display of Recycle flag after update volume=foo recycle=yes.
592 It previously printed New Recyle flag is: no. This fixes bug
595 kes Correct seg fault when switching tape drives during restore.
596 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
597 be used until after 2.2.0 release.
599 kes Remove fnmatch() in SD that permitted wild card specifications.
602 kes Fix %g in filename returned by SQL for browse tree reported by
604 kes Fix configure so that it puts config.out in the cwd rather than
606 kes Attempt to fix the locking problem reported by Eric in bug #906.
607 kes Make berrno class to leave errno unchanged after constructor call.
608 kes Make bnet_server use the heap rather than the stack to allocate
609 its socket fd pointers to avoid a crash at termination. Problem
610 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
612 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
613 and putting it in depkgs-qt along with Qt4.3.
615 kes Rework code in acquire.c that switches drives for reading when
616 the Media Type does not match. This should fix bug #906
618 ebl Fix a director segfault during job setup #907
619 kes Correct seg fault in postgresql when first operation returns no
620 rows. Fixes Dirks File browser problem seg fault with bat.
622 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
623 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
626 kes Implement PopUp YES/NO dialog for bat.
628 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
630 kes Correct RunScript to terminate job in FD on failure.
631 kes Change abort_on_error and AbortJobOnError to fail_on_error
632 and FailJobOnError in RunScripts.
633 kes Minor tweaks of code formating in RunScripts, principally to
634 avoid depassing 80 columns.
636 kes Eliminate one #ifdef Win32 in bsmtp
637 kes Implement grow tool to grow a file for testing very large databases.
638 kes Add big-vol-test to test Bacula seeking with > 5GB.
641 kes Modify find_next_volume() to return all values in Media record.
642 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
646 kes Update Release notes
648 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
649 Warning, in previous beta version, all media get from scratch keep their
652 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
653 This should fix bug #842. Made a note to look at removing the temp
654 files at the end of the install.
655 kes Add ability to mount and unmount a file device providing it is
656 marked as being removable and has the appropriate mount and unmount
657 commands defined in the Device resource. This fixes bug #830.
658 kes When applying a storage override, release all previous storage
659 definitions rather than just prepending the new storage.
660 This should prevent a good deal of confusion.
662 kes Implement ./configure search for qwt libraries.
664 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
665 Win32 FD. This should fix bug #893.
666 kes Remove an unnecessary beep in Win32 init code.
667 kes Update copyright dates in Win32 executable about boxes.
668 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
669 code with a BSD getopt.c and getopt.h.
670 kes Remove sched.h from the Win32 compat directory -- not used.
671 kes Remove the Exit menu item from the Win32 tray monitor. If you really
672 need to shut it down, do it through the services panel or the command
674 kes Remove some inappropriate Bacula FSFE copyrights.
675 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
676 kes Fix regress config non-portable test as pointed out by
677 Florian Heigl <florian.heigl@gmail.com>
678 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
679 as pointed out by Florian Heigl <florian.heigl@gmail.com>
681 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
682 Reported by Frank Sweetser.
686 kes Fix client-only build.
687 kes Integrate client-only fixes for bsys (initgroups) and conio from
688 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
689 kes Make arguments to get_scratch_volume() in same order as other
691 kes Rework the prune_volumes() subroutine so that after purging and
692 no volume found in desired pool, it will check for a scratch
693 volume. This prevents recycling the whole scratch pool.
694 kes Add code to status storage to print boffset_t (largefile support).
696 kes Move qwt (Graphics libarary for Qt4) to depkgs.
697 kes You now need a --with-qwt=<dir> to be able to build bat.
698 kes Update src/win32/cats/bacula_cats.def to include the new
699 db_get_query_dbids() call on Win32.
701 kes Correct a problem when selecting a scratch volume and moving
702 it to another pool that lost some columns.
703 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
704 kes Enhance Autochanger error messages to include Volume and device name.
705 kes Rework prune_volumes() code to take account of InChanger flag,
706 and to handle recycling volumes going to the Scratch pool and
707 current pool because the RecyclePool directive.
708 kes Implement a better and more efficient db_get_query_dbids() to
709 handle creating and passing back a list of DBIds.
713 kes Start work on new more efficient DBId subroutine. First use
714 will be for recycling volume to Scratch inchanger.
715 kes Increase number of JobIds in pruning from 1000 to 10000.
716 This to be replaced by above routine.
717 kes Begin implementation of building Qt4 on Win32.
718 kes Correct typo in fix I added for bad TLS shutdown.
719 kes Pull 2.0.3 patches into patches directory.
720 kes Update Release notes. Include qt-console in line count.
721 kes Update Projects file.
723 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
724 bug in migration code where a job that spanned two volumes
727 kes Implement new BST_DESPOOLING blocked state. Change from locking
728 during despooling in SD to blocking. This means that other threads
729 can work with the device structure, in particular the reservations
730 system while despooling.
732 kes Fix return in reservation message queue that missed clearing
733 the jcr lock (implemented 26Jun07 below).
734 kes Rename a number of dev methods to make locking function names
736 kes Document locking in lock.c. Move lock structures to new file
739 kes Move reservations message lock to lock jcr only this
741 kes Move main SD locking code into lock.c (new file).
742 kes Update Win32 build to include lock.c
746 kes Dirk committed the qwt library code for drawing graphs in bat.
747 kes Tweak install of qwt so that it is integrated with ./configure.
749 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
750 out by Eric (my typo).
751 ebl Fix configure.in to get batch mode enable
752 kes Return correct string from authenticate.cpp in bat when connecting
754 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
755 spurious line drops when using TLS.
756 kes Do not file reparse points when restoring a file that already
759 kes Implement Windows reparse points -- similar to directories, but
760 we do not descend into it. This is a first cut. They seem to
761 be backed up, but restore is not yet tested.
762 kes Remove restore_blocking in tls code when shutting a socket to leave
763 it in blocking mode. Hopefully this will fix the encryption bug
764 reported by Frank Sweetser.
765 kes When opening a file for backup, tell the OS that we are going to
766 read it sequentially -- optimization.
767 kes Change variable names in authenticate_director() to not conflict
768 with member names in bat. Caused great confusion with compiler,
771 kes Queue openssl error messages in case of comm problem.
772 kes Do shutdown() call if socket terminated.
773 kes Remove some duplicated code in tls.c
774 kes Move more of the bsock member variables into private and access
776 kes Add Frank Sweetser's tls-test to the regression suite.
778 kes Add Swedish sv.po file
780 kes Don't print clock skew message in FD if less than 3 seconds diff.
781 kes Add a bit of VSS info to status client.
782 kes Implement a first cut of Vista VSS, using Win2003 code.
786 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
787 loaded tape but uses first drive).
788 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
789 This was indeed a Win32 issue.
791 kes Simplify search of autochanger for in-use Volume.
792 kes Fix exit condition of check for in-use volume. kes Remove
793 inappropriate my_postgresql_free_result() in db_close()
795 kes Fix bad return in FD when encryption signature not found.
796 Probably caused a crash.
797 kes Inhibit missing encryption signature error messages for
798 file types where no signature computed.
799 kes Correct inverted check on autochanger in reservation system.
800 kes Tweak debug code in autochanger reservation.
802 kes Add some additional locking in the cats directory in subroutines
803 that modify packet variables called from batch insert.
804 kes Rework how dcrs are allocated. new_dcr() can now be called
805 with an existing pointer, and it will simply clean it up.
806 This allows the reservation system to test various different
807 devices, and will permit easy device changes.
808 kes A bunch of changes all over to handle new new_dcr() calling
810 kes Work more on the Volume management in the SD. Remember Volumes
811 for tape drives and for autochangers (even virtual disk changers).
812 kes When looking at the Volume list to reserve a drive, handle
813 autochanger names correctly by interating through the changer
814 devices. Also call the Director to see if a Volume is suitable
816 kes Fix some bugs in bscan. Make sure all media records are written.
817 Make sure that valid JobMedia records are written for disk files.
818 Previously they were completely wrong.
819 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
820 that the URLs don't change and so that the developers will all
821 work off the same copy. Rebuild from scrach.
822 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
826 kes Fix seg fault in FD from incorrect digest size.
827 kes Fix argument to non-OpenSSL crypto.c subroutine.
831 kes Remove a few malloc()s from the encryption code.
832 kes Use the class calls to bsock in filed/backup.c and restore.c in
833 place of the old bnet_xxx code.
834 kes Implement code that does an on the fly calculation of the
835 signing digest during restore of encrypted files. It makes
836 a best guess at the algorithm, and if it is not correct, will
837 then revert to the old code which reads the file after it is
839 kes Implement at least one missing crypto stream in stream_to_ascii()
840 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
841 #877 where a reload with bad syntax causes Dir to exit.
843 Cut: 2.1.14 beta (not released)
845 kes Do not free a volume on a tape drive until another volume is
846 mounted and read, or the autochanger unloads the volume.
847 This should help the SD re-use volumes that are already mounted,
848 and should fix bug #886.
849 kes Apply patch from user brettedgar that allows gnome2-console include
850 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
851 kes Apply patch from Lucien Weller that fixes day of week calculation
852 because of DST flag problem. Fixes bug #887.
854 kes Move find_next_appendable_volume() to after acquiring a valid device
855 in reserve.c. This fixes bug #864 -- confirmed by reporter.
857 kes Unable to reproduce bug 872. However added additional testing for
859 kes Bug #874 resolved by documenting SQLite limitations.
860 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
861 kes Bug #881 resolved by removing typo in mtx-changer script.
862 kes Made Frank Sweetser's wiki the official Bacula wiki with his
863 approval. Added a link to the wiki on the web page, and implemented
864 a backup from http://paramount.ind.wpi.edu
866 kes Fix update allfrompool to pass pool name.
868 kes Convert to pure GPL v2 license.
869 kes Fix sscanf problems reported by Peter Buschman that caused
870 a bus error on Solaris.
871 kes Rework (simplify) the select prompt in bat.
872 kes Move get_jobid_from_tid() into lib and create a
874 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
875 should definitely fix the problem of lost error messages in the
877 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
878 kes Eliminate tcpd.h from the project. Enclose the #include from the
879 library with extern C ...
880 kes Add print of signal name when a signal is trapped.
884 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
886 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
887 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
888 makes SQLit3 run 30 times faster, though a bit less safe.
889 kes Implement --with-batch-insert in configure and detection of thread
890 safe libraries. It is on by default, but turned off if no thread
891 safe library (e.g. SQLite 2) is available.
893 kes Fix Bacula PostgreSQL buffer overruns.
894 kes Do better checking for NULL results returned from PostgreSQL;
895 implement retry for failed queries; clear results buffer after
896 failed query. Hopefully this will correct the PostgreSQL failures.
898 kes Implement algorithm to handle only one appendable volume with
899 Prefer Mounted Volumes = no.
900 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
901 returned from a query.
902 kes Make volume lock recursive.
903 kes Implement an additional volume reservation algorithm that
904 starts by considering all reserved volumes then uses the
905 old brute force algorithm of searching the resources to
906 find a suitable device.
907 kes Add new reservations debug code and refine the old code.
908 kes Update the win32/dll/bacula.defs file.
910 kes Tweak reservations algorithm to permit a few more cases, i.e.
911 volume reserved, but on different drive, ...
912 kes Enhance SD status to include Pool and Media Type for drive in a
913 more readable format (a bit longer).
914 kes Fix PostgreSQL double free.
916 kes Minor refactoring of restore decryption code.
917 kes Add code to smartall.c to detect double free of a buffer.
919 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
920 so that bsmtp will create a correct email address (mailbox only).
921 kes Modify 'memory' command so that the buffers are listed as 'In use'
922 to avoid confusion with Orphaned buffers.
923 kes I reworked the OpenSSL include/lib flags to be handled in
924 the standard Bacula way, which should fix bug #863 concerning
925 non-standard OpenSSL libraries.
927 kes Implement Help Browser window for bat.
928 kes Fix reload bug that reset StorageId to zero.
930 kes Fix TLS #ifdefing when TLS turned off.
931 kes Ensure that when labelling a tape with Slot=0 that InChanger
933 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
935 kes Add StartTime to final uar_sel_jobid_temp query so that we can
936 add DISTINCT (required by PostgreSQL).
937 kes Implement BSOCK authenticate_director() method. Eventually will
938 authenicate all daemons.
939 kes Move several more functions into the BSOCK class.
941 kes Add code to tell the OS that we no longer need a cached
942 file that we were reading. In findlib/bfile.c. Also,
943 only cache files that we are reading. Thanks to
944 Tobias Oetiker <tobi@oetiker.ch> for the idea.
945 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
946 kes Implement script to automatically generate cats and dll .def
948 kes Update README.mingw32 to include new .def file generation.
949 kes Correct typo in UTF-8 error message as reported by:
950 jhernandez <julianhernandez@gmail.com>
951 kes Add additional sm_check() code on debug level 1.
952 kes Set default debug level to 1.
953 kes Trap SIGABRT in attempt to get traceback.
955 kes Reduce bat connect timeout from 30 to 15 seconds.
956 kes More restructuring and implementing BSOCK class in place of
958 kes Remove a few unnecessary malloc() tests in crypto code.
959 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
960 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
961 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
963 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
965 kes Fix Verify InitCatalog. The attributes were not pointing to the
966 correct saved location.
967 kes Implement message callback so that GUI is sure to get all
968 daemon messages. Currently displayed in a dialog in bat.
969 kes Ignore SIGUSR2 (Bacula timer) in bat.
970 kes Apply regress patch from bug #859 to allow regress to work
971 with Solaris compiler.
973 kes Begin adding TLS support to bat.
974 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
975 clean up lex.c and make it more readable.
977 kes Move more bnet functions into the BSOCK class.
978 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
979 kes Complete change of berrno strerror() method to bstrerror()
983 kes Cleanup incorrect email addresses in bsmtp.
984 kes Make bat display initial messages rather than discard them.
986 kes First cut of adding .mod to the run command.
987 kes Implement auto display of messages in bat.
988 kes Enhanced preferences to allow all Bacula output to be
991 kes Try to make bsmtp date routines more generic.
992 kes Fixed bug #856 autochanger documentation.
993 kes Rework bsmtp date editing for Win32. This fixes bug #854.
994 kes Add new cats entry point so Win32 builds.
996 kes Attempt to fix bsmtp date editing on OSes without %z editing.
998 kes Do better checking for the MySQL 64 bit libraries looking for both
999 .a and .so libraries.
1000 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1001 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1002 kes Require the thread safe version of MySQL during configure. Thanks
1003 to Andre Noll for pointing this out.
1004 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1005 continuing in migration code.
1006 kes Apply implementation of tray-monitor font derived from gnome-console
1007 submitted by Andreas Piesk <a.piesk@gmx.net>
1009 kes Eliminate important memory loss in SQLite
1010 kes Fixed the batch insert MySQL thread specific data that was not
1011 being freed. See cats/mysql.c:db_thread_cleanup().
1012 kes Fix restore before command.
1013 kes Convert old hdr.name to name() in a few places.
1014 kes Implement update jobid command.
1015 kes Return all time_t dates in db_get_job_record()
1016 kes Stop watchdog in SD earlier.
1017 kes Put Pool just after Storage in please mount message.
1018 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1021 kes Update the po files.
1022 kes Fix Verify InitCatalog by making it cache attributes.
1024 kes Change name bacula-bat to bat for man 1 page to correspond to
1026 kes Check for client and store NULL pointers in status command. This
1028 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1029 kes Fix sign extended editing of %p.
1030 kes Clean out a little old #ifdefing in cats/mysql.c
1032 kes If time diff between DIR and FD is more than 600 seconds convert
1033 INFO message to WARNING.
1034 kes Implement heap size display in status for all daemons.
1035 kes Attempt to fix MySQL db open memory loss (not successfull).
1036 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1037 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1038 Query. This looks like a MySQL but but by doing extra releases,
1039 the memory goes away. This should fix bug #847.
1041 kes When backup fails, cancel SD before waiting for sd termination.
1042 kes If SD is waiting for FD to connect during cancel, wake up the
1044 kes Fix fsf code so that errno is correctly reported.
1045 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1047 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1048 so that Bacula doesn't later stumble into a seg fault.
1049 kes Use the term Restore Client in the restore Job report.
1050 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1051 the original job's FileSetId.
1052 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1053 spooling in migration jobs. Not yet tested.
1054 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1055 reading conf file from a pipe. However, do it with open_bpipe()
1056 rather than popen. Not yet tested.
1058 kes Fix an ugly bug where the VolCatBytes were getting updated
1060 kes Implement bconsole memory command that prints current memory
1061 usage, plus smartalloc dump.
1062 kes Clarify some error messages in backup, admin, and migrate.
1063 kes Shrink label dialog to smaller size.
1064 kes Invert Cancel OK buttons on restore to be OK Cancel.
1065 kes More strerror() to bstrerror() conversions.
1067 kes Start implementing bstrerror() in place of strerror().
1068 kes Stripping path -- seems to work.
1070 kes Prevent door and port files from being restored (mostly
1072 kes Free an unreleased buffer in compat code.
1073 kes Change console Job name from *Console* to -Console- to eliminate
1074 Win32 filename problems. Put Win32 path separator when creating
1075 Console file. This fixes bug #846.
1076 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1078 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1080 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1081 to force Win32 error message.
1083 kes First cut strip path. The data should be passed to the FD,
1084 but nothing is done with it yet.
1085 kes Enhance the digest and signature routines in the crypto
1086 library to accept a JCR and to use it to print error messages
1087 so that they will go in the Job report rather than the daemon's
1089 kes Simplify some of the verify signature code.
1090 kes Simplify a few of the alternative returns in the signature
1093 ebl Use only POSIX regex instead of GNU regex in breg.c for
1094 File relocation. It fix broken freebsd compilation.
1095 kes Convert all other Dir files to use new ua class message
1097 kes Tentative fix for missing digest signature in bug 807.
1098 kes Correct handle problem in new win32_ftruncate routine.
1099 kes Convert ua_purge.c and ua_update.c to use new ua class
1100 message routines for bat.
1102 kes Correct incorrect installation of LICENSE in Win32 installer.
1103 kes Display LICENSE at the beginning of the Win32 install.
1104 kes Attempt to correct the need for the png files to be installed
1106 kes Reapply my bat.conf install script in qt-console. I think I
1107 editted bat.pro instead of bat.pro.in and it was lost.
1108 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1109 the /var/lock/subsys for subsysdir. Also corrects typos in the
1112 kes First cut update job.
1113 kes Correct configure to include qmake of src/qt-console directory.
1115 kes Make restore job yes/mod/no print in one command so GUI works.
1116 kes First cut implementing backup and restore client.
1117 kes Correct editing in Verify output that caused a seg fault.
1119 kes Insure that bat.conf is not overwritten during installation.
1120 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1121 while I was implementing migration in March 2006 !
1123 ebl Cleanup file relocation, using char *RegexWhere instead of
1124 char *where + bool where_use_regexp
1125 kes Update some manpages and add bat manpage.
1126 kes Make a first cut at converting bacula.spec.in for bwx-console
1128 kes Apply patch from John Goerzen to add hostname as fourth argument
1129 to make_catalog_backup script.
1130 kes Fix typos I introduced into bsmtp.c
1131 kes Make pm_strxxx() routines handle input of NULL pointer. This
1132 is to protect from NULL pointers returned from SQL databases.
1133 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1134 kes Add more debug to FIFO code -- fix fifo regression test.
1136 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1137 kes Add thread timer to bnet_connect() to break from OS if wait time
1140 kes Update Win32 build to include new files, new symbols, and
1142 kes Implement socket level heartbeat (tcp_keepidle)
1143 ebl Commit File relocation patch
1144 kes Make bat have 'make install' target.
1145 kes Warn during install if old gnome-console binary found.
1146 kes Warn during install if old wx-console binary found.
1147 kes Add -8 option to bsmtp command line to add content type utf-8.
1148 Fixes bug #809. (Character coding problem in bsmtp).
1149 kes If < is found in target (from, to, cc) then do not enclose the
1150 target in < > in bsmtp. Fixes bug #772 (malformed address).
1151 kes When printing certain items in dbcheck, stop after 300000.
1152 Fixes bug #822. (dbcheck loops).
1153 kes Incorrect status in Dir after waiting for mount with poll set.
1156 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1158 kes Print waiting to reserve a device every 5 mins.
1160 kes Don't call close_part in label.c if tape and relabel.
1161 kes Don't free volume if busy in close() -- should help with
1163 ebl Fix #824 RunScript bug (After script could be execute twice)
1164 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1165 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1166 Add a regression script to test RunScript
1168 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1171 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1172 deprecated. No additional bugs will be fixed, and they will be dropped
1173 in a future release (probably 2.4.0).
1174 kes Change name of wx-console to bwx-console to make it more Bacula
1176 kes Change the name of gnome-console to bgnome-console to make it
1179 kes Some time in March, a Feature Request with patch from Jorj Bauer
1180 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1182 The ability for the director to validate a Client (FD) CN against
1183 an arbitrary set of patterns rather than the hostname, with
1184 A new 'TLS Allowed CN' set of directives which are implemented
1185 in the Client resource. Then pattern matching is used in place
1186 of hostname matching against the Certificate's CN. As an example, we
1187 have certificates which (a) use a local CA, and (b) have a CN of the
1189 kes Add new/changed entry points to Win32 build
1190 kes Create unaccepted-projects for projects that are not accepted.
1191 kes Simplify locking in the reservations system.
1192 kes Add more debug code in reservations.
1193 kes Make sure error condition on reserving a volume is handled correctly.
1194 kes Correct handling of volume_in_use.
1195 kes Correct handling of initializing a device.
1196 kes Move handling of broadcasting releasing a device into release_device().
1197 kes Correct attaching dcr to dev so that it is only done if device
1198 is properly initiated.
1200 kes Locking debug level tweaks in SD.
1201 kes Tweak new Volume code.
1203 kes Add exec external-command [wait-seconds] to bconsole. This
1204 executes the external-command. Note! normally external-command
1205 should be enclosed in double quotes.
1206 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1207 it should normally be off in a production system.
1209 kes Implement die command for SD so that we can force it to dump.
1210 kes Implement SD lock debug code.
1211 kes Implement new algorithm for keeping Volume list in SD. It
1212 is now owned by the device.
1214 kes Implement new code for freeing in use volumes that should
1215 resolve if not all, some of the problems of multiple drive
1216 tape conflicts described in bug 801.
1218 kes Fix gui/bacula-web/images files in svn.
1219 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1221 ebl Fix a bug in batch mode (in string escape)
1222 kes Correct migration prune SQL typo that crept in in a
1223 recent 2.1.x change.
1225 kes Move bnet_despool() into class in bsock.c
1226 kes Modify job report to include director name and Build OS.
1227 kes Move drop root privilege and check_catalog() before fork.
1228 kes Add update database scripts (version 9 to 10) to updatedb directory.
1230 ebl Check size and age of each file after its backup to see if
1231 it has changed during backup, if 'checkfilechanges' is set.
1232 The FD will do an extra check (stat(2)) after
1233 each file backup. mtime, ctime and size are compared with
1234 'before backup' information. If time or size mismatch, an
1235 error message will be generated. You must upgrade FD to use it.
1237 kes Make database name and user configurable
1238 --with-db-name=xxx --with-db-user=xxx
1239 kes Add back database type to message.c for debugging.
1241 kes Implement dir_sql() which issues an SQL query.
1242 kes Modify bat medialist to use dir_sql() and do some minor C++
1243 formatting as well as eliminating a number of pointers, simplifing
1246 kes Fix some of the mtx-changer grep commands for tape label readers.
1247 kes Convert a number of bsendmsg into the appropriate send/warning/error
1248 message class calls.
1249 kes Suppress the using database message in the .sql command.
1250 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1252 kes Add context menu for floating a window.
1253 kes Some minor cleanup and name changes in qt-console
1254 kes Add doing mt setblk 0 in Win32 mtx-changer.
1255 kes Apply Martin's bug fix to move definition of ENODATA for
1257 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1258 sqlite2 and sqlite3.
1260 kes More pruning cleanup.
1261 kes Turn on wait_for_drive by default in mtx-changer.
1262 kes Turn on Batch insert code by default as it now passes regression.
1263 kes Add ./configure --enable-bat to enable building of Bat.
1264 No install yet though.
1266 kes Implement a new .sql command for bat.
1267 kes Implement code to turn off pruning in obtaining the next volume.
1268 Pruning is turned off for the status dir command, but turned on
1269 for SD requests and for the list nextvolume command.
1271 kes Correct Qmsg() that was not updated correctly when committing a
1272 previous change (probably the recent TLS patch).
1274 kes Write new subroutine is_volume_purged() that explicitly checks
1275 if the Volume is purged, and if so marks it as such. This should
1276 resolve problems reported about needing to mount twice to recycle
1278 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1279 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1280 amount of duplicated code.
1281 kes Do volume pruning only for the Media Type desired (reduces pruning time
1282 if multiple Media Types are in the same pool).
1283 kes Implement more detailed info in the Job report for the Bacula version
1285 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1287 ebl Add bbatch tool to bench database and insert mode.
1288 Fix sql quote stuff in batch mode
1289 Fix sql stuff for mysql
1291 kes Correct problems with am/pm scheduling. Fixes bug #808.
1292 kes Implement new prunning code that prunes up to 1000 jobs at
1293 the same time. The same technique can be applied to a number
1294 of other prune/purge subroutines.
1295 kes Add an insanity check when starting a new tape job to ensure
1296 that the tape position has not been changed. If so fail the
1298 kes Fix Win32 build for dlls to add the folllowing:
1299 src/lib/bsock.c -- new file with new entry points
1300 src/lib/dlist.c -- new entry points
1301 src/cats/sql_create.c -- new entry point
1302 src/cats/sql_cmds.c -- new DATA item exported
1304 ebl batch mode cleanup bscan-test is ok now.
1305 kes Implement SD code to check length of disk volume before appending.
1307 kes Correct return status on db_batch... routines.
1308 kes Add call to db_write_batch_file_records() to migration code.
1309 ebl Fix AfterJob timing
1310 kes Move the checking of the database in initializion of the Director
1311 to after we drop privileges. This avoids the need for both root
1312 and bacula access to the DB.
1313 kes Correct a misplaced variable definition in src/filed/backup.c
1314 kes Correct how the new batch insert db_create_attributes_record()
1315 uses the arguments. Caused a seg fault in bscan.
1316 kes Implement lock() and unlock() methods in DEVICE class.
1317 Implement block() and set_block(xx) methods in DEVICE class.
1318 kes Modify bnet_connect() so that it uses time() to check for the
1319 wait time expiring (on some OSes, some system calls may not
1320 return immediately).
1321 kes Modify Verify to obtain the previous JobId when it is actually
1322 running rather than at schedule time (as it was in 1.38.x).
1323 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1325 kes When checking pid in pid file, continue running if the pid is
1326 the same as ours. This occurs on IRIX after a system crash.
1329 kes Extend new GUI API.
1330 kes Make the ua structure a class, and implement send_msg(),
1331 error_msg(), warning_msg(), and info_msg().
1333 kes Apply fix from for building wx-console on the Mac from
1335 kes Implement new select mechanism for GUI programs.
1336 kes Reorganize initialization of stackedWidgets in bat.
1338 kes Add updated nagios plugin supplied by Christian Masopust.
1340 kes More bat implementation.
1341 kes File migrate bug with Pool Occupancy using mediaid instead
1342 of jobids. Fixes bug #795.
1343 kes Fix orphaned buffers in filed backup and verify due to
1344 crypto buffers not freed during errors. Fixes bug #789.
1345 kes Extend new GUI api code to tree commands.
1346 kes Ensure that tree and dot commands check console ACLs.
1347 kes Permit marking directory with trailing slash.
1348 kes Allow 20 console connections (instead of only 10).
1350 kes Add smartctl call to bacula-sd.conf as an example of getting
1353 kes Modify jobq.c to let simultaneous restore jobs run. This may
1354 cause them to fail if they cannot get a drive.
1355 kes Add Client Connect Wait to Storage daemon to permit users to
1356 modify the time the SD waits for a FD connection.
1358 kes Correct virtual changer check which was backwards. This caused
1359 volumes to be unloaded into slots already occupied.
1361 kes Apply Command ACL filter to JobId list in restore command.
1362 kes Correct typeo in var.c patch.
1364 kes Don't let Bacula prune File or Job records for the current Job.
1365 kes Fix variable substitution pad + inc bug reported (with patch)
1368 kes Correct SQLite log table index as reported by Luca Berra.
1370 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1372 kes Begin implementing new comm signals for API.
1373 kes Fix a few places in lib/message.c where the open fd may
1375 kes Continue implementing lib/bsock.c (real class). Make jcr,
1376 who, host, and port private. There are new methods to access
1377 them for non-class use. This required touching a number of files.
1379 kes Add LANG=C to autoconf/randpass so it works with languages other
1380 than English. Fixes bug #788.
1382 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1384 You will not be able to generate Include/Exclude list any more.
1385 It will be fixed soon.
1386 If you want to use this, you can apply
1387 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1389 kes Restore of sockets created false error messages because Bacula
1390 no longer restores sockets, but the code was still trying to
1391 set the attributes on a non-existent file. Reported by a user.
1392 ebl finish RecyclePool feature
1393 Media will takes Pool.RecyclePool
1394 when moving from Scratch to a Pool or when user will do
1395 update volume=xxx frompool
1396 To use it, add RecyclePool = aPool to your Pool resource
1399 RecyclePool = Scratch
1403 kes Expand new BSOCK class adding signal() and new BNET signals.
1404 kes Begin enhancing the dot commands adding a new API function
1405 that returns more information and will make it easier
1406 to interface to the Director from a program.
1408 kes Make DEVICE fd private. Its new name is m_fd, and can be
1409 obtained with dev->fd() outside the class. This is the
1410 first of many DEVICE members to be made private.
1411 kes Implement Michael Renner's idea on having a virtual disk
1412 changer. I made some minor modifications (e.g. I did not
1413 implement the Virtual Changer directive, but simply set
1414 the Changer Command to an empty string.
1416 kes Implement a BSOCK send() method that writes the whole record
1417 in a single write() request rather than in two.
1418 ebl add update volume=xxx recyclepool=yyyy
1419 volume takes recyclepool from pool when using update volume=xxx from pool
1421 kes Fix encryption deblocking bug, which caused some restored files
1422 to be truncated. This fixes bug #763.
1423 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1424 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1426 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1427 ebl Use btime_t instead of uint64_t in media patch.
1429 kes Optimize the use of the database a bit in the Status dir command.
1430 Only open it when needed, ensure that if any previous database
1431 was opened, it is closed.
1433 kes Correct VolCatBytes bug from media patch.
1434 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1435 in the case of orphaned records.
1436 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1437 and File records in 300K chunks to be more efficient. This
1438 idea came from Juan Luis Frances (if I remember right).
1439 kes Apply Eric's scratch patch that moves a purged Volume to
1440 the RecyclePool. Question: how is RecyclePool set? what
1441 happens to the ScratchPool?
1442 kes Apply Eric's media patch that collects read/write media
1443 times as well as byte counts. This patch requires a
1444 simultaneous upgrade of the DIR and SD. Note, there
1445 should be some way to turn off timing. I'm not sure
1446 times are in Bacula units.
1447 kes Apply Eric's batch-insert patch.
1449 kes Update projects list.
1451 kes Implement Include/Exclude file lists in FD as dlists using
1452 the new dlistString class. This permits efficiently having
1453 large include/exclude lists and completes project Item 25.
1454 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1455 console is authorized to cancel the job. This fixes bug
1457 kes Modify SD so that the VolCatJobs medium record is updated
1458 at the beginning of a Job rather than the end. This
1459 fixes bug #775 where exceeding MaxVolJobs caused jobs
1461 kes Added a mutex around getting and setting Volume information
1462 so that multiple simultaneous jobs will single thread.
1464 Switch to using Subversion
1465 kes Remove src/pygtk-console/ from configure
1467 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1468 plus the entrypoints.
1469 kes Apply patch supplied that corrects debug print
1470 in canceling jobs for max run time. Supplied as
1471 part of bug #621, which was previously fixed.
1473 kes Test on job_canceled() and sd_msg_thread_done inside
1474 loop starting the message thread to avoid a race condition.
1476 kes Remove rl_catch_signal from console.c as it conflicted
1477 with the header definition. Fixes bug #765.
1478 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1480 kes Clarify some stored/acquire messages to indicate if the
1481 problem is with read or append.
1483 kes Fix memory leak with storage ids in cats/sql_get.c
1484 kes Terminate watchdog earlier to avoid reference to released
1485 memory -- reported by Jason Austin.
1486 kes Move closing the database from jobq.c to the director daemon
1487 termination routine. This fixes memory leaks for shadow jobs
1488 (i.e. migration jobs).
1489 kes Free up the unique jobid chain items in migrate.c. This fixes
1490 a memory leak problem.
1491 kes Convert some ugly looking for statements to use foreach_alist
1492 in findlib/find.c. This will facilitate converting the structures
1493 to use dlist (for large include/exclude lists).
1494 kes Fix a bug in the btree.c and btree.h routines, then rename them
1495 rblist and add them to be built in src/lib. Include some new
1496 methods written by Rudolf Cejka that make the code more readable
1497 (hides some of the ugly casting).
1498 kes Add set_next() and set_prev() methods which make the code much more
1499 readable. Also add a new dlistString class that facilitates storing
1500 strings in dlists. To be used in the large include/exclude lists.
1501 kes Make some trivial modifications to lib/tree.h that use rblist
1502 rather than dlist for storing the tree links. This was suggested
1503 by Rudolf Cejka. The result of this is that the restore tree now
1504 uses red-black binary trees rather than simple linked lists. This
1505 should give rather dramatic speed improvements for directories
1506 contining large numbers of directories/files (more than 10000).
1508 kes Fix maxruntime bug #621.
1510 ebl Implement the include JobID in spool file name project.
1511 kes Reorder projects file in order determined by Jan 2007 vote.
1512 kes Implement item #12 on project list -- quick release of FD by
1514 kes Fix open of SQLite3 db where user does not have write permission
1515 so that DIR does not crash. Fixes bug #761.
1517 kes Add back missing @ in Win32 Makefile.
1518 kes Change 'Device not configured to autolabel' from INFO
1520 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1521 which should restart an indefinite # of times.
1522 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1523 other DIR specifications.
1525 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1526 Fix path quoting in SQLite scripts.
1527 Fix problems with SHGetFolderPath.
1529 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1531 kes Fix Job restart on error bug that promotes an Inc to a Full
1532 backup. This should fix bug #755.
1533 kes Add qt-console and first cut of code.
1537 kes Fix Bacula->Documentation link on Win32 to point to index.html
1538 instead of bacula.html. Fixed bug #750.
1539 kes Return JobId in db_get_job_record() when JobId==0. This should
1541 kes Do not release source pointers when restarting a failed job.
1543 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1544 This *should* fix bug #747.
1545 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1548 kes Modify USTORE constructor to set an empty store_source string,
1549 and don't copy the store_source string in a cancel. Hopefully
1550 this will fix Arno's seg fault, bug #744.
1551 kes Add back code to disable conio in configure. Fixes bug #743.
1552 kes Correct the Options scanner in the FD to correctly handle
1553 SHA1 option, which was eating the next option. Reported by
1555 kes Add code to indicate when the SD is spooling, spool wait, and
1556 despooling as requested by Alan Brown.
1558 Version 2.0.0 released: 4 January 2007