1 Technical notes on version 2.3
5 kes Make SD code that contructs attribute insert check string lengths
7 kes If Dir gets an error during inserting attributes, cancel SD.
8 This reduces unnecessary error messages.
10 kes Correct search boolean for getting Volume info
11 ebl Cleanup batch code.
12 kes Back out one small change to the reservation system (reserving a volume).
13 kes Rework how a Volume is mounted. It is now much more intelligent and
14 will always attempt to use any mounted volume if possible and reduces
15 calls to the Director asking about volumes.
17 kes Turn off some code when batch insert not enabled.
18 kes Edit FD name in connect error messages.
19 kes Rework the reservation system to take into account that the Director
20 might give us a Volume that is different from the current one being
21 used, and to ensure that we don't exceed Maximum Volume Jobs.
22 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
23 fatal error with multiple jobs running'
24 kes Add more debug code in reservation system.
25 kes Implement maxvol-test to check bug #947.
27 kes Add code to handle tray monitor separated from Win32 FD.
28 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
30 kes Add missed return in fixing verify bug -- trunk only.
31 ebl Fix a command parser issue causing a director segfault.
32 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
34 kes Increase the max block size to 4MB fixes bug #957.
35 kes ERABT if user sets min block size > max block size. Fixes bug #956.
36 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
37 is not properly mounted (recognized) during a poll.
38 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
39 Job that has differences reports Verify OK.
40 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
42 ebl Add an option to operate on all pools with update vol parameters.
43 This complete the project 20. Patch from Nigel Stepp.
44 ebl Add history support to bconsole when using readline.
45 Using Ctrl-D to exit doesn't update .bconsole_history
46 kes Modify new volume algorithm to use max MediaId for generating next
47 volume number rather than the count of Volumes. This should essentially
48 eliminate the failure rate if some volumes were deleted. Bug #921.
49 kes Begin implemention of Optimize Job Scheduling.
50 kes Implement restore callback that Dirk and I agreed on for bat
51 restore. This fixes bug #928. Restore of backup of zero files fails.
52 kes Fix SQL Catalog logging which broke with new db_escape_string
55 kes Fix bacula_cats.def for new db_escape_string().
56 kes Increase size of name string when FD making connection to SD.
57 May fix bug #953. FD->SD connection failure.
59 kes Add code to help Dan debug 2drive-incremental-2disk test.
60 kes Add code to try to fix bug #908.
61 kes Add waits to multiple exit detection code to try to force pid
62 file to always be deleted.
63 kes Restore good dev.tar.gz to rescue set appropriate binary property.
65 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
66 trying to switch drives by checking for blocking before unblocking.
68 kes Cancel storage daemon in all cases where FD reports error. This
69 should fix virtually all cases of bug #920.
70 kes Fix db_escape_string() for MySQL which did not compile.
72 kes Fix error message that was clobbered when Dir tells SD it does not
73 have write permission on Volume. This should fix a minor point
74 in bug #942, but not the main problem.
75 kes Add code to cancel job in SD if FD connection fails. This should
77 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
78 dvl Pass jcr and db into db_escape_string() to enable better escaping
80 kes Fix migration code to get correct Volume name with multiple volumes
81 by skipping |. Fixes bug #936.
82 kes Implement patch supplied by Landon to fix bug #944 where using
83 TLS with bconsole uses 99+% of the CPU.
84 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
86 kes Move patches into patches directory.
88 ebl Fix bug #946 about "bacula-dir -t" which doesn't works
91 ebl Using "m" in bconsole will show messages like before,
93 kes Fix bug #935, and probably also bug #903 where files were not
94 restored. MediaId was not properly set in JobMedia record after
97 kes Suppress chown and chmod error messages if the FD is not running
100 kes Apply Martin Simmons' patch that should turn off the new API usage
101 when batch insert is turned off allowing building on older
103 kes Add ./configure search in qwt-qt4 for qwt package
105 kes Bacula is now free of 3rd party GPL copyrighted code!
107 kes Add guid_to_name.c/h which replace idcache.
108 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
110 ebl Detect if new PosgreSQL batch insert API is present.
111 kes Correct incorrect mempool call causing Director crash. Occurs on
112 systems without va_copy().
113 sb Update spec files for 2.2.1 release
115 kes Fix memory pool call in ua_output.c. bug #934.
116 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
117 Add test program to fnmatch.c
119 kes Integrate patch to README.vc8 from
120 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
121 edit it to get it into Unix patch format.
122 kes Implement mkpath.c to replace old FSF makepath.c
124 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
126 Release Version 2.2.1
128 kes Update POTFILES.in
129 kes Cleanup a few underquoted AC_DEFUNs in configure
130 kes Apply patch from Martin Simmons that adds a test for va_copy to
133 kes Fix bug #921 by increasing the number of tries to create a new volume
135 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
136 can be called multiple times. Implement a version for machines
137 without va_copy() that gets a big buffer.
139 kes Integrate more portable zone offset code into bsmtp.c
140 Submitted by Attila Fülöp.
142 kes Fix bad SD->FD return status reported by
143 (James Harper) <james.harper@bendigoit.com.au>
144 ebl Fix a bug in read_close_session which return random status
145 thanks to James Harper
147 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
148 and directory names during restore of single file/directories.
149 kes Add sanity checks to .sql command when string is empty. Hopefully
150 that will resolve Dirks Director crash.
152 kes Apply patch submitted by Martin Simmons that corrects a seg fault
153 in the bsmtp chat subroutine when debug is >= 10.
155 kes Fix Director crash when running bat SQL queries.
156 kes Add David's notes on Item 8: Copy pools.
158 kes Rework projects file to be current and ready for a vote.
159 kes Enhance lex scanner error message.
161 kes Tweak LICENSE file to mention BSD code.
162 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
163 if specified on the ./configure.
164 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
165 This class is intended to allow us to open a second bsock to the
166 Director while in the restore subdialog.
168 kes Fix configure to create bat Makefile before creating dependencies.
169 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
170 kes Add a tooltip to the tray monitor.
171 dvl Set the Director's PID file before dropping privs. This fixes
174 kes Update AUTHORs file
175 kes Increase the default max concurrent jobs to 20 in FD and SD to
176 correspond with the default .conf files.
177 kes Rewrite the Win32 service routines. This eliminates the 3 copies
178 some different, of the same file created by RN when porting the
180 kes Rearrange some of the Win32 directories and the placement of the files
182 kes Set DEVELOPER flag in version.h
184 ========================================================================
185 Release Version 2.2.0
187 kes Apply a second doc patch from Marc.
188 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
189 improves the tips section that discusses how to setup multiple
192 kes Update bat README file.
193 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
194 corrects a typo in the Recycle status check in db_find_next_volume().
195 This will probably fix a number of annoying problems with multiple
197 kes Modify most of dird/msgchan.c to use bsock class calls rather than
198 bnet calls -- no functionality change.
200 kes Modify the Verify output to specify if files are missing on
201 the Volume(s) or disk. Fixes confusion in bug #916.
202 kes When more than one Volume is read in a migration job, the last
203 Volume bytes reported are from the last read volume rather than
204 the last written volume. Fixed. This fixes bug #910.
205 kes Fix display of Recycle flag after update volume=foo recycle=yes.
206 It previously printed New Recyle flag is: no. This fixes bug
209 kes Correct seg fault when switching tape drives during restore.
210 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
211 be used until after 2.2.0 release.
213 kes Remove fnmatch() in SD that permitted wild card specifications.
216 kes Fix %g in filename returned by SQL for browse tree reported by
218 kes Fix configure so that it puts config.out in the cwd rather than
220 kes Attempt to fix the locking problem reported by Eric in bug #906.
221 kes Make berrno class to leave errno unchanged after constructor call.
222 kes Make bnet_server use the heap rather than the stack to allocate
223 its socket fd pointers to avoid a crash at termination. Problem
224 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
226 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
227 and putting it in depkgs-qt along with Qt4.3.
229 kes Rework code in acquire.c that switches drives for reading when
230 the Media Type does not match. This should fix bug #906
232 ebl Fix a director segfault during job setup #907
233 kes Correct seg fault in postgresql when first operation returns no
234 rows. Fixes Dirks File browser problem seg fault with bat.
236 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
237 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
240 kes Implement PopUp YES/NO dialog for bat.
242 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
244 kes Correct RunScript to terminate job in FD on failure.
245 kes Change abort_on_error and AbortJobOnError to fail_on_error
246 and FailJobOnError in RunScripts.
247 kes Minor tweaks of code formating in RunScripts, principally to
248 avoid depassing 80 columns.
250 kes Eliminate one #ifdef Win32 in bsmtp
251 kes Implement grow tool to grow a file for testing very large databases.
252 kes Add big-vol-test to test Bacula seeking with > 5GB.
255 kes Modify find_next_volume() to return all values in Media record.
256 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
260 kes Update Release notes
262 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
263 Warning, in previous beta version, all media get from scratch keep their
266 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
267 This should fix bug #842. Made a note to look at removing the temp
268 files at the end of the install.
269 kes Add ability to mount and unmount a file device providing it is
270 marked as being removable and has the appropriate mount and unmount
271 commands defined in the Device resource. This fixes bug #830.
272 kes When applying a storage override, release all previous storage
273 definitions rather than just prepending the new storage.
274 This should prevent a good deal of confusion.
276 kes Implement ./configure search for qwt libraries.
278 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
279 Win32 FD. This should fix bug #893.
280 kes Remove an unnecessary beep in Win32 init code.
281 kes Update copyright dates in Win32 executable about boxes.
282 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
283 code with a BSD getopt.c and getopt.h.
284 kes Remove sched.h from the Win32 compat directory -- not used.
285 kes Remove the Exit menu item from the Win32 tray monitor. If you really
286 need to shut it down, do it through the services panel or the command
288 kes Remove some inappropriate Bacula FSFE copyrights.
289 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
290 kes Fix regress config non-portable test as pointed out by
291 Florian Heigl <florian.heigl@gmail.com>
292 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
293 as pointed out by Florian Heigl <florian.heigl@gmail.com>
295 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
296 Reported by Frank Sweetser.
300 kes Fix client-only build.
301 kes Integrate client-only fixes for bsys (initgroups) and conio from
302 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
303 kes Make arguments to get_scratch_volume() in same order as other
305 kes Rework the prune_volumes() subroutine so that after purging and
306 no volume found in desired pool, it will check for a scratch
307 volume. This prevents recycling the whole scratch pool.
308 kes Add code to status storage to print boffset_t (largefile support).
310 kes Move qwt (Graphics libarary for Qt4) to depkgs.
311 kes You now need a --with-qwt=<dir> to be able to build bat.
312 kes Update src/win32/cats/bacula_cats.def to include the new
313 db_get_query_dbids() call on Win32.
315 kes Correct a problem when selecting a scratch volume and moving
316 it to another pool that lost some columns.
317 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
318 kes Enhance Autochanger error messages to include Volume and device name.
319 kes Rework prune_volumes() code to take account of InChanger flag,
320 and to handle recycling volumes going to the Scratch pool and
321 current pool because the RecyclePool directive.
322 kes Implement a better and more efficient db_get_query_dbids() to
323 handle creating and passing back a list of DBIds.
327 kes Start work on new more efficient DBId subroutine. First use
328 will be for recycling volume to Scratch inchanger.
329 kes Increase number of JobIds in pruning from 1000 to 10000.
330 This to be replaced by above routine.
331 kes Begin implementation of building Qt4 on Win32.
332 kes Correct typo in fix I added for bad TLS shutdown.
333 kes Pull 2.0.3 patches into patches directory.
334 kes Update Release notes. Include qt-console in line count.
335 kes Update Projects file.
337 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
338 bug in migration code where a job that spanned two volumes
341 kes Implement new BST_DESPOOLING blocked state. Change from locking
342 during despooling in SD to blocking. This means that other threads
343 can work with the device structure, in particular the reservations
344 system while despooling.
346 kes Fix return in reservation message queue that missed clearing
347 the jcr lock (implemented 26Jun07 below).
348 kes Rename a number of dev methods to make locking function names
350 kes Document locking in lock.c. Move lock structures to new file
353 kes Move reservations message lock to lock jcr only this
355 kes Move main SD locking code into lock.c (new file).
356 kes Update Win32 build to include lock.c
360 kes Dirk committed the qwt library code for drawing graphs in bat.
361 kes Tweak install of qwt so that it is integrated with ./configure.
363 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
364 out by Eric (my typo).
365 ebl Fix configure.in to get batch mode enable
366 kes Return correct string from authenticate.cpp in bat when connecting
368 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
369 spurious line drops when using TLS.
370 kes Do not file reparse points when restoring a file that already
373 kes Implement Windows reparse points -- similar to directories, but
374 we do not descend into it. This is a first cut. They seem to
375 be backed up, but restore is not yet tested.
376 kes Remove restore_blocking in tls code when shutting a socket to leave
377 it in blocking mode. Hopefully this will fix the encryption bug
378 reported by Frank Sweetser.
379 kes When opening a file for backup, tell the OS that we are going to
380 read it sequentially -- optimization.
381 kes Change variable names in authenticate_director() to not conflict
382 with member names in bat. Caused great confusion with compiler,
385 kes Queue openssl error messages in case of comm problem.
386 kes Do shutdown() call if socket terminated.
387 kes Remove some duplicated code in tls.c
388 kes Move more of the bsock member variables into private and access
390 kes Add Frank Sweetser's tls-test to the regression suite.
392 kes Add Swedish sv.po file
394 kes Don't print clock skew message in FD if less than 3 seconds diff.
395 kes Add a bit of VSS info to status client.
396 kes Implement a first cut of Vista VSS, using Win2003 code.
400 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
401 loaded tape but uses first drive).
402 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
403 This was indeed a Win32 issue.
405 kes Simplify search of autochanger for in-use Volume.
406 kes Fix exit condition of check for in-use volume. kes Remove
407 inappropriate my_postgresql_free_result() in db_close()
409 kes Fix bad return in FD when encryption signature not found.
410 Probably caused a crash.
411 kes Inhibit missing encryption signature error messages for
412 file types where no signature computed.
413 kes Correct inverted check on autochanger in reservation system.
414 kes Tweak debug code in autochanger reservation.
416 kes Add some additional locking in the cats directory in subroutines
417 that modify packet variables called from batch insert.
418 kes Rework how dcrs are allocated. new_dcr() can now be called
419 with an existing pointer, and it will simply clean it up.
420 This allows the reservation system to test various different
421 devices, and will permit easy device changes.
422 kes A bunch of changes all over to handle new new_dcr() calling
424 kes Work more on the Volume management in the SD. Remember Volumes
425 for tape drives and for autochangers (even virtual disk changers).
426 kes When looking at the Volume list to reserve a drive, handle
427 autochanger names correctly by interating through the changer
428 devices. Also call the Director to see if a Volume is suitable
430 kes Fix some bugs in bscan. Make sure all media records are written.
431 Make sure that valid JobMedia records are written for disk files.
432 Previously they were completely wrong.
433 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
434 that the URLs don't change and so that the developers will all
435 work off the same copy. Rebuild from scrach.
436 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
440 kes Fix seg fault in FD from incorrect digest size.
441 kes Fix argument to non-OpenSSL crypto.c subroutine.
445 kes Remove a few malloc()s from the encryption code.
446 kes Use the class calls to bsock in filed/backup.c and restore.c in
447 place of the old bnet_xxx code.
448 kes Implement code that does an on the fly calculation of the
449 signing digest during restore of encrypted files. It makes
450 a best guess at the algorithm, and if it is not correct, will
451 then revert to the old code which reads the file after it is
453 kes Implement at least one missing crypto stream in stream_to_ascii()
454 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
455 #877 where a reload with bad syntax causes Dir to exit.
457 Cut: 2.1.14 beta (not released)
459 kes Do not free a volume on a tape drive until another volume is
460 mounted and read, or the autochanger unloads the volume.
461 This should help the SD re-use volumes that are already mounted,
462 and should fix bug #886.
463 kes Apply patch from user brettedgar that allows gnome2-console include
464 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
465 kes Apply patch from Lucien Weller that fixes day of week calculation
466 because of DST flag problem. Fixes bug #887.
468 kes Move find_next_appendable_volume() to after acquiring a valid device
469 in reserve.c. This fixes bug #864 -- confirmed by reporter.
471 kes Unable to reproduce bug 872. However added additional testing for
473 kes Bug #874 resolved by documenting SQLite limitations.
474 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
475 kes Bug #881 resolved by removing typo in mtx-changer script.
476 kes Made Frank Sweetser's wiki the official Bacula wiki with his
477 approval. Added a link to the wiki on the web page, and implemented
478 a backup from http://paramount.ind.wpi.edu
480 kes Fix update allfrompool to pass pool name.
482 kes Convert to pure GPL v2 license.
483 kes Fix sscanf problems reported by Peter Buschman that caused
484 a bus error on Solaris.
485 kes Rework (simplify) the select prompt in bat.
486 kes Move get_jobid_from_tid() into lib and create a
488 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
489 should definitely fix the problem of lost error messages in the
491 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
492 kes Eliminate tcpd.h from the project. Enclose the #include from the
493 library with extern C ...
494 kes Add print of signal name when a signal is trapped.
498 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
500 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
501 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
502 makes SQLit3 run 30 times faster, though a bit less safe.
503 kes Implement --with-batch-insert in configure and detection of thread
504 safe libraries. It is on by default, but turned off if no thread
505 safe library (e.g. SQLite 2) is available.
507 kes Fix Bacula PostgreSQL buffer overruns.
508 kes Do better checking for NULL results returned from PostgreSQL;
509 implement retry for failed queries; clear results buffer after
510 failed query. Hopefully this will correct the PostgreSQL failures.
512 kes Implement algorithm to handle only one appendable volume with
513 Prefer Mounted Volumes = no.
514 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
515 returned from a query.
516 kes Make volume lock recursive.
517 kes Implement an additional volume reservation algorithm that
518 starts by considering all reserved volumes then uses the
519 old brute force algorithm of searching the resources to
520 find a suitable device.
521 kes Add new reservations debug code and refine the old code.
522 kes Update the win32/dll/bacula.defs file.
524 kes Tweak reservations algorithm to permit a few more cases, i.e.
525 volume reserved, but on different drive, ...
526 kes Enhance SD status to include Pool and Media Type for drive in a
527 more readable format (a bit longer).
528 kes Fix PostgreSQL double free.
530 kes Minor refactoring of restore decryption code.
531 kes Add code to smartall.c to detect double free of a buffer.
533 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
534 so that bsmtp will create a correct email address (mailbox only).
535 kes Modify 'memory' command so that the buffers are listed as 'In use'
536 to avoid confusion with Orphaned buffers.
537 kes I reworked the OpenSSL include/lib flags to be handled in
538 the standard Bacula way, which should fix bug #863 concerning
539 non-standard OpenSSL libraries.
541 kes Implement Help Browser window for bat.
542 kes Fix reload bug that reset StorageId to zero.
544 kes Fix TLS #ifdefing when TLS turned off.
545 kes Ensure that when labelling a tape with Slot=0 that InChanger
547 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
549 kes Add StartTime to final uar_sel_jobid_temp query so that we can
550 add DISTINCT (required by PostgreSQL).
551 kes Implement BSOCK authenticate_director() method. Eventually will
552 authenicate all daemons.
553 kes Move several more functions into the BSOCK class.
555 kes Add code to tell the OS that we no longer need a cached
556 file that we were reading. In findlib/bfile.c. Also,
557 only cache files that we are reading. Thanks to
558 Tobias Oetiker <tobi@oetiker.ch> for the idea.
559 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
560 kes Implement script to automatically generate cats and dll .def
562 kes Update README.mingw32 to include new .def file generation.
563 kes Correct typo in UTF-8 error message as reported by:
564 jhernandez <julianhernandez@gmail.com>
565 kes Add additional sm_check() code on debug level 1.
566 kes Set default debug level to 1.
567 kes Trap SIGABRT in attempt to get traceback.
569 kes Reduce bat connect timeout from 30 to 15 seconds.
570 kes More restructuring and implementing BSOCK class in place of
572 kes Remove a few unnecessary malloc() tests in crypto code.
573 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
574 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
575 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
577 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
579 kes Fix Verify InitCatalog. The attributes were not pointing to the
580 correct saved location.
581 kes Implement message callback so that GUI is sure to get all
582 daemon messages. Currently displayed in a dialog in bat.
583 kes Ignore SIGUSR2 (Bacula timer) in bat.
584 kes Apply regress patch from bug #859 to allow regress to work
585 with Solaris compiler.
587 kes Begin adding TLS support to bat.
588 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
589 clean up lex.c and make it more readable.
591 kes Move more bnet functions into the BSOCK class.
592 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
593 kes Complete change of berrno strerror() method to bstrerror()
597 kes Cleanup incorrect email addresses in bsmtp.
598 kes Make bat display initial messages rather than discard them.
600 kes First cut of adding .mod to the run command.
601 kes Implement auto display of messages in bat.
602 kes Enhanced preferences to allow all Bacula output to be
605 kes Try to make bsmtp date routines more generic.
606 kes Fixed bug #856 autochanger documentation.
607 kes Rework bsmtp date editing for Win32. This fixes bug #854.
608 kes Add new cats entry point so Win32 builds.
610 kes Attempt to fix bsmtp date editing on OSes without %z editing.
612 kes Do better checking for the MySQL 64 bit libraries looking for both
613 .a and .so libraries.
614 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
615 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
616 kes Require the thread safe version of MySQL during configure. Thanks
617 to Andre Noll for pointing this out.
618 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
619 continuing in migration code.
620 kes Apply implementation of tray-monitor font derived from gnome-console
621 submitted by Andreas Piesk <a.piesk@gmx.net>
623 kes Eliminate important memory loss in SQLite
624 kes Fixed the batch insert MySQL thread specific data that was not
625 being freed. See cats/mysql.c:db_thread_cleanup().
626 kes Fix restore before command.
627 kes Convert old hdr.name to name() in a few places.
628 kes Implement update jobid command.
629 kes Return all time_t dates in db_get_job_record()
630 kes Stop watchdog in SD earlier.
631 kes Put Pool just after Storage in please mount message.
632 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
635 kes Update the po files.
636 kes Fix Verify InitCatalog by making it cache attributes.
638 kes Change name bacula-bat to bat for man 1 page to correspond to
640 kes Check for client and store NULL pointers in status command. This
642 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
643 kes Fix sign extended editing of %p.
644 kes Clean out a little old #ifdefing in cats/mysql.c
646 kes If time diff between DIR and FD is more than 600 seconds convert
647 INFO message to WARNING.
648 kes Implement heap size display in status for all daemons.
649 kes Attempt to fix MySQL db open memory loss (not successfull).
650 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
651 kes Eliminate memory loss in MySQL (possibly other SQLs) during
652 Query. This looks like a MySQL but but by doing extra releases,
653 the memory goes away. This should fix bug #847.
655 kes When backup fails, cancel SD before waiting for sd termination.
656 kes If SD is waiting for FD to connect during cancel, wake up the
658 kes Fix fsf code so that errno is correctly reported.
659 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
661 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
662 so that Bacula doesn't later stumble into a seg fault.
663 kes Use the term Restore Client in the restore Job report.
664 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
665 the original job's FileSetId.
666 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
667 spooling in migration jobs. Not yet tested.
668 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
669 reading conf file from a pipe. However, do it with open_bpipe()
670 rather than popen. Not yet tested.
672 kes Fix an ugly bug where the VolCatBytes were getting updated
674 kes Implement bconsole memory command that prints current memory
675 usage, plus smartalloc dump.
676 kes Clarify some error messages in backup, admin, and migrate.
677 kes Shrink label dialog to smaller size.
678 kes Invert Cancel OK buttons on restore to be OK Cancel.
679 kes More strerror() to bstrerror() conversions.
681 kes Start implementing bstrerror() in place of strerror().
682 kes Stripping path -- seems to work.
684 kes Prevent door and port files from being restored (mostly
686 kes Free an unreleased buffer in compat code.
687 kes Change console Job name from *Console* to -Console- to eliminate
688 Win32 filename problems. Put Win32 path separator when creating
689 Console file. This fixes bug #846.
690 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
692 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
694 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
695 to force Win32 error message.
697 kes First cut strip path. The data should be passed to the FD,
698 but nothing is done with it yet.
699 kes Enhance the digest and signature routines in the crypto
700 library to accept a JCR and to use it to print error messages
701 so that they will go in the Job report rather than the daemon's
703 kes Simplify some of the verify signature code.
704 kes Simplify a few of the alternative returns in the signature
707 ebl Use only POSIX regex instead of GNU regex in breg.c for
708 File relocation. It fix broken freebsd compilation.
709 kes Convert all other Dir files to use new ua class message
711 kes Tentative fix for missing digest signature in bug 807.
712 kes Correct handle problem in new win32_ftruncate routine.
713 kes Convert ua_purge.c and ua_update.c to use new ua class
714 message routines for bat.
716 kes Correct incorrect installation of LICENSE in Win32 installer.
717 kes Display LICENSE at the beginning of the Win32 install.
718 kes Attempt to correct the need for the png files to be installed
720 kes Reapply my bat.conf install script in qt-console. I think I
721 editted bat.pro instead of bat.pro.in and it was lost.
722 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
723 the /var/lock/subsys for subsysdir. Also corrects typos in the
726 kes First cut update job.
727 kes Correct configure to include qmake of src/qt-console directory.
729 kes Make restore job yes/mod/no print in one command so GUI works.
730 kes First cut implementing backup and restore client.
731 kes Correct editing in Verify output that caused a seg fault.
733 kes Insure that bat.conf is not overwritten during installation.
734 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
735 while I was implementing migration in March 2006 !
737 ebl Cleanup file relocation, using char *RegexWhere instead of
738 char *where + bool where_use_regexp
739 kes Update some manpages and add bat manpage.
740 kes Make a first cut at converting bacula.spec.in for bwx-console
742 kes Apply patch from John Goerzen to add hostname as fourth argument
743 to make_catalog_backup script.
744 kes Fix typos I introduced into bsmtp.c
745 kes Make pm_strxxx() routines handle input of NULL pointer. This
746 is to protect from NULL pointers returned from SQL databases.
747 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
748 kes Add more debug to FIFO code -- fix fifo regression test.
750 kes Implement posix_fadvise in FD, and for reading spool files in SD.
751 kes Add thread timer to bnet_connect() to break from OS if wait time
754 kes Update Win32 build to include new files, new symbols, and
756 kes Implement socket level heartbeat (tcp_keepidle)
757 ebl Commit File relocation patch
758 kes Make bat have 'make install' target.
759 kes Warn during install if old gnome-console binary found.
760 kes Warn during install if old wx-console binary found.
761 kes Add -8 option to bsmtp command line to add content type utf-8.
762 Fixes bug #809. (Character coding problem in bsmtp).
763 kes If < is found in target (from, to, cc) then do not enclose the
764 target in < > in bsmtp. Fixes bug #772 (malformed address).
765 kes When printing certain items in dbcheck, stop after 300000.
766 Fixes bug #822. (dbcheck loops).
767 kes Incorrect status in Dir after waiting for mount with poll set.
770 kes Extend idea of Prefer Mounted Volumes to mean a volume about
772 kes Print waiting to reserve a device every 5 mins.
774 kes Don't call close_part in label.c if tape and relabel.
775 kes Don't free volume if busy in close() -- should help with
777 ebl Fix #824 RunScript bug (After script could be execute twice)
778 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
779 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
780 Add a regression script to test RunScript
782 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
785 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
786 deprecated. No additional bugs will be fixed, and they will be dropped
787 in a future release (probably 2.4.0).
788 kes Change name of wx-console to bwx-console to make it more Bacula
790 kes Change the name of gnome-console to bgnome-console to make it
793 kes Some time in March, a Feature Request with patch from Jorj Bauer
794 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
796 The ability for the director to validate a Client (FD) CN against
797 an arbitrary set of patterns rather than the hostname, with
798 A new 'TLS Allowed CN' set of directives which are implemented
799 in the Client resource. Then pattern matching is used in place
800 of hostname matching against the Certificate's CN. As an example, we
801 have certificates which (a) use a local CA, and (b) have a CN of the
803 kes Add new/changed entry points to Win32 build
804 kes Create unaccepted-projects for projects that are not accepted.
805 kes Simplify locking in the reservations system.
806 kes Add more debug code in reservations.
807 kes Make sure error condition on reserving a volume is handled correctly.
808 kes Correct handling of volume_in_use.
809 kes Correct handling of initializing a device.
810 kes Move handling of broadcasting releasing a device into release_device().
811 kes Correct attaching dcr to dev so that it is only done if device
812 is properly initiated.
814 kes Locking debug level tweaks in SD.
815 kes Tweak new Volume code.
817 kes Add exec external-command [wait-seconds] to bconsole. This
818 executes the external-command. Note! normally external-command
819 should be enclosed in double quotes.
820 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
821 it should normally be off in a production system.
823 kes Implement die command for SD so that we can force it to dump.
824 kes Implement SD lock debug code.
825 kes Implement new algorithm for keeping Volume list in SD. It
826 is now owned by the device.
828 kes Implement new code for freeing in use volumes that should
829 resolve if not all, some of the problems of multiple drive
830 tape conflicts described in bug 801.
832 kes Fix gui/bacula-web/images files in svn.
833 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
835 ebl Fix a bug in batch mode (in string escape)
836 kes Correct migration prune SQL typo that crept in in a
839 kes Move bnet_despool() into class in bsock.c
840 kes Modify job report to include director name and Build OS.
841 kes Move drop root privilege and check_catalog() before fork.
842 kes Add update database scripts (version 9 to 10) to updatedb directory.
844 ebl Check size and age of each file after its backup to see if
845 it has changed during backup, if 'checkfilechanges' is set.
846 The FD will do an extra check (stat(2)) after
847 each file backup. mtime, ctime and size are compared with
848 'before backup' information. If time or size mismatch, an
849 error message will be generated. You must upgrade FD to use it.
851 kes Make database name and user configurable
852 --with-db-name=xxx --with-db-user=xxx
853 kes Add back database type to message.c for debugging.
855 kes Implement dir_sql() which issues an SQL query.
856 kes Modify bat medialist to use dir_sql() and do some minor C++
857 formatting as well as eliminating a number of pointers, simplifing
860 kes Fix some of the mtx-changer grep commands for tape label readers.
861 kes Convert a number of bsendmsg into the appropriate send/warning/error
863 kes Suppress the using database message in the .sql command.
864 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
866 kes Add context menu for floating a window.
867 kes Some minor cleanup and name changes in qt-console
868 kes Add doing mt setblk 0 in Win32 mtx-changer.
869 kes Apply Martin's bug fix to move definition of ENODATA for
871 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
874 kes More pruning cleanup.
875 kes Turn on wait_for_drive by default in mtx-changer.
876 kes Turn on Batch insert code by default as it now passes regression.
877 kes Add ./configure --enable-bat to enable building of Bat.
878 No install yet though.
880 kes Implement a new .sql command for bat.
881 kes Implement code to turn off pruning in obtaining the next volume.
882 Pruning is turned off for the status dir command, but turned on
883 for SD requests and for the list nextvolume command.
885 kes Correct Qmsg() that was not updated correctly when committing a
886 previous change (probably the recent TLS patch).
888 kes Write new subroutine is_volume_purged() that explicitly checks
889 if the Volume is purged, and if so marks it as such. This should
890 resolve problems reported about needing to mount twice to recycle
892 kes Rewrite pruning algorithm to do more work in the SQL engine, and
893 to pass a list of JobIds to be deleted to SQL. Also, minimize the
894 amount of duplicated code.
895 kes Do volume pruning only for the Media Type desired (reduces pruning time
896 if multiple Media Types are in the same pool).
897 kes Implement more detailed info in the Job report for the Bacula version
899 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
901 ebl Add bbatch tool to bench database and insert mode.
902 Fix sql quote stuff in batch mode
903 Fix sql stuff for mysql
905 kes Correct problems with am/pm scheduling. Fixes bug #808.
906 kes Implement new prunning code that prunes up to 1000 jobs at
907 the same time. The same technique can be applied to a number
908 of other prune/purge subroutines.
909 kes Add an insanity check when starting a new tape job to ensure
910 that the tape position has not been changed. If so fail the
912 kes Fix Win32 build for dlls to add the folllowing:
913 src/lib/bsock.c -- new file with new entry points
914 src/lib/dlist.c -- new entry points
915 src/cats/sql_create.c -- new entry point
916 src/cats/sql_cmds.c -- new DATA item exported
918 ebl batch mode cleanup bscan-test is ok now.
919 kes Implement SD code to check length of disk volume before appending.
921 kes Correct return status on db_batch... routines.
922 kes Add call to db_write_batch_file_records() to migration code.
923 ebl Fix AfterJob timing
924 kes Move the checking of the database in initializion of the Director
925 to after we drop privileges. This avoids the need for both root
926 and bacula access to the DB.
927 kes Correct a misplaced variable definition in src/filed/backup.c
928 kes Correct how the new batch insert db_create_attributes_record()
929 uses the arguments. Caused a seg fault in bscan.
930 kes Implement lock() and unlock() methods in DEVICE class.
931 Implement block() and set_block(xx) methods in DEVICE class.
932 kes Modify bnet_connect() so that it uses time() to check for the
933 wait time expiring (on some OSes, some system calls may not
935 kes Modify Verify to obtain the previous JobId when it is actually
936 running rather than at schedule time (as it was in 1.38.x).
937 kes Fix src/job.c to handle MaxWaitTime correctly. This should
939 kes When checking pid in pid file, continue running if the pid is
940 the same as ours. This occurs on IRIX after a system crash.
943 kes Extend new GUI API.
944 kes Make the ua structure a class, and implement send_msg(),
945 error_msg(), warning_msg(), and info_msg().
947 kes Apply fix from for building wx-console on the Mac from
949 kes Implement new select mechanism for GUI programs.
950 kes Reorganize initialization of stackedWidgets in bat.
952 kes Add updated nagios plugin supplied by Christian Masopust.
954 kes More bat implementation.
955 kes File migrate bug with Pool Occupancy using mediaid instead
956 of jobids. Fixes bug #795.
957 kes Fix orphaned buffers in filed backup and verify due to
958 crypto buffers not freed during errors. Fixes bug #789.
959 kes Extend new GUI api code to tree commands.
960 kes Ensure that tree and dot commands check console ACLs.
961 kes Permit marking directory with trailing slash.
962 kes Allow 20 console connections (instead of only 10).
964 kes Add smartctl call to bacula-sd.conf as an example of getting
967 kes Modify jobq.c to let simultaneous restore jobs run. This may
968 cause them to fail if they cannot get a drive.
969 kes Add Client Connect Wait to Storage daemon to permit users to
970 modify the time the SD waits for a FD connection.
972 kes Correct virtual changer check which was backwards. This caused
973 volumes to be unloaded into slots already occupied.
975 kes Apply Command ACL filter to JobId list in restore command.
976 kes Correct typeo in var.c patch.
978 kes Don't let Bacula prune File or Job records for the current Job.
979 kes Fix variable substitution pad + inc bug reported (with patch)
982 kes Correct SQLite log table index as reported by Luca Berra.
984 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
986 kes Begin implementing new comm signals for API.
987 kes Fix a few places in lib/message.c where the open fd may
989 kes Continue implementing lib/bsock.c (real class). Make jcr,
990 who, host, and port private. There are new methods to access
991 them for non-class use. This required touching a number of files.
993 kes Add LANG=C to autoconf/randpass so it works with languages other
994 than English. Fixes bug #788.
996 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
998 You will not be able to generate Include/Exclude list any more.
999 It will be fixed soon.
1000 If you want to use this, you can apply
1001 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1003 kes Restore of sockets created false error messages because Bacula
1004 no longer restores sockets, but the code was still trying to
1005 set the attributes on a non-existent file. Reported by a user.
1006 ebl finish RecyclePool feature
1007 Media will takes Pool.RecyclePool
1008 when moving from Scratch to a Pool or when user will do
1009 update volume=xxx frompool
1010 To use it, add RecyclePool = aPool to your Pool resource
1013 RecyclePool = Scratch
1017 kes Expand new BSOCK class adding signal() and new BNET signals.
1018 kes Begin enhancing the dot commands adding a new API function
1019 that returns more information and will make it easier
1020 to interface to the Director from a program.
1022 kes Make DEVICE fd private. Its new name is m_fd, and can be
1023 obtained with dev->fd() outside the class. This is the
1024 first of many DEVICE members to be made private.
1025 kes Implement Michael Renner's idea on having a virtual disk
1026 changer. I made some minor modifications (e.g. I did not
1027 implement the Virtual Changer directive, but simply set
1028 the Changer Command to an empty string.
1030 kes Implement a BSOCK send() method that writes the whole record
1031 in a single write() request rather than in two.
1032 ebl add update volume=xxx recyclepool=yyyy
1033 volume takes recyclepool from pool when using update volume=xxx from pool
1035 kes Fix encryption deblocking bug, which caused some restored files
1036 to be truncated. This fixes bug #763.
1037 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1038 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1040 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1041 ebl Use btime_t instead of uint64_t in media patch.
1043 kes Optimize the use of the database a bit in the Status dir command.
1044 Only open it when needed, ensure that if any previous database
1045 was opened, it is closed.
1047 kes Correct VolCatBytes bug from media patch.
1048 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1049 in the case of orphaned records.
1050 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1051 and File records in 300K chunks to be more efficient. This
1052 idea came from Juan Luis Frances (if I remember right).
1053 kes Apply Eric's scratch patch that moves a purged Volume to
1054 the RecyclePool. Question: how is RecyclePool set? what
1055 happens to the ScratchPool?
1056 kes Apply Eric's media patch that collects read/write media
1057 times as well as byte counts. This patch requires a
1058 simultaneous upgrade of the DIR and SD. Note, there
1059 should be some way to turn off timing. I'm not sure
1060 times are in Bacula units.
1061 kes Apply Eric's batch-insert patch.
1063 kes Update projects list.
1065 kes Implement Include/Exclude file lists in FD as dlists using
1066 the new dlistString class. This permits efficiently having
1067 large include/exclude lists and completes project Item 25.
1068 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1069 console is authorized to cancel the job. This fixes bug
1071 kes Modify SD so that the VolCatJobs medium record is updated
1072 at the beginning of a Job rather than the end. This
1073 fixes bug #775 where exceeding MaxVolJobs caused jobs
1075 kes Added a mutex around getting and setting Volume information
1076 so that multiple simultaneous jobs will single thread.
1078 Switch to using Subversion
1079 kes Remove src/pygtk-console/ from configure
1081 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1082 plus the entrypoints.
1083 kes Apply patch supplied that corrects debug print
1084 in canceling jobs for max run time. Supplied as
1085 part of bug #621, which was previously fixed.
1087 kes Test on job_canceled() and sd_msg_thread_done inside
1088 loop starting the message thread to avoid a race condition.
1090 kes Remove rl_catch_signal from console.c as it conflicted
1091 with the header definition. Fixes bug #765.
1092 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1094 kes Clarify some stored/acquire messages to indicate if the
1095 problem is with read or append.
1097 kes Fix memory leak with storage ids in cats/sql_get.c
1098 kes Terminate watchdog earlier to avoid reference to released
1099 memory -- reported by Jason Austin.
1100 kes Move closing the database from jobq.c to the director daemon
1101 termination routine. This fixes memory leaks for shadow jobs
1102 (i.e. migration jobs).
1103 kes Free up the unique jobid chain items in migrate.c. This fixes
1104 a memory leak problem.
1105 kes Convert some ugly looking for statements to use foreach_alist
1106 in findlib/find.c. This will facilitate converting the structures
1107 to use dlist (for large include/exclude lists).
1108 kes Fix a bug in the btree.c and btree.h routines, then rename them
1109 rblist and add them to be built in src/lib. Include some new
1110 methods written by Rudolf Cejka that make the code more readable
1111 (hides some of the ugly casting).
1112 kes Add set_next() and set_prev() methods which make the code much more
1113 readable. Also add a new dlistString class that facilitates storing
1114 strings in dlists. To be used in the large include/exclude lists.
1115 kes Make some trivial modifications to lib/tree.h that use rblist
1116 rather than dlist for storing the tree links. This was suggested
1117 by Rudolf Cejka. The result of this is that the restore tree now
1118 uses red-black binary trees rather than simple linked lists. This
1119 should give rather dramatic speed improvements for directories
1120 contining large numbers of directories/files (more than 10000).
1122 kes Fix maxruntime bug #621.
1124 ebl Implement the include JobID in spool file name project.
1125 kes Reorder projects file in order determined by Jan 2007 vote.
1126 kes Implement item #12 on project list -- quick release of FD by
1128 kes Fix open of SQLite3 db where user does not have write permission
1129 so that DIR does not crash. Fixes bug #761.
1131 kes Add back missing @ in Win32 Makefile.
1132 kes Change 'Device not configured to autolabel' from INFO
1134 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1135 which should restart an indefinite # of times.
1136 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1137 other DIR specifications.
1139 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1140 Fix path quoting in SQLite scripts.
1141 Fix problems with SHGetFolderPath.
1143 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1145 kes Fix Job restart on error bug that promotes an Inc to a Full
1146 backup. This should fix bug #755.
1147 kes Add qt-console and first cut of code.
1151 kes Fix Bacula->Documentation link on Win32 to point to index.html
1152 instead of bacula.html. Fixed bug #750.
1153 kes Return JobId in db_get_job_record() when JobId==0. This should
1155 kes Do not release source pointers when restarting a failed job.
1157 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1158 This *should* fix bug #747.
1159 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1162 kes Modify USTORE constructor to set an empty store_source string,
1163 and don't copy the store_source string in a cancel. Hopefully
1164 this will fix Arno's seg fault, bug #744.
1165 kes Add back code to disable conio in configure. Fixes bug #743.
1166 kes Correct the Options scanner in the FD to correctly handle
1167 SHA1 option, which was eating the next option. Reported by
1169 kes Add code to indicate when the SD is spooling, spool wait, and
1170 despooling as requested by Alan Brown.
1172 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob