1 Technical notes on version 2.3
5 ebl Fixes #897 and #1005 where bacula doesn't display runscript
8 kes Add new free_tls() entry point so that Win32 builds.
9 kes Fix compile warning in src/lib/util.c
10 kes Fix entry point for edit_job_codes() so that Win32 builds.
11 kes Fix seg fault Frank Sweetser reports in regression testing
12 on his systems. The problem was that the original author of
13 bsnprintf.c did not take into account the side effects of
14 using ++x in the argument to a #define.
15 kes Make SD protocol backward compatible with version 2.2.x.
17 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
18 because Bacula no longer restores sockets.
19 ebl Always use ignorecase fileset option on win32 FD.
21 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
22 that implements double quoting include names in conf files,
23 and also allows piping input by having the first character
24 be a vertical bar (|).
25 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
26 that implement %f in RunScripts to pass the FileSet name.
27 kes Skip leading | when lex input comes from a pipe as suggested
28 by Michael Stapelberg <michael@stapelberg.de>.
30 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
31 Nerijus Baliunas <nerijus@users.sourceforge.net>
33 kes Implement Plugin Directory and plugin events.
35 kes Implement a security enhancement: TLS authentication but no
36 encryption. Enabled by setting 'TLS Authentication = yes'.
37 Note when this is on, TLS encryption is turned OFF!
39 kes This patch corrects a problem where the maximum concurrent storage
40 jobs counter gets out of sync during restore jobs causing jobs to
41 'wait on max Storage jobs'. This patch fixes bug #1009.
43 kes This patch fixes bcopy so that it produces correct Volumes.
45 kes This patch eliminates spurious output to the console during a VerifyVolume
46 job that contains encrypted data. It fixes bug #1024.
48 kes This patch prevents the 'status dir' command from trying to use a scratch
49 volume and possibly moving it from one pool to another. This patch fixes
52 kes Add new include to postgresql.c suggested by Marc Cousins so
53 that it compiles correctly with pgre version 8.3.
55 kes Fix --archivedir addition to configure. Replace it with
56 --with-archivedir in configure.in This fixes the regression
58 kes This patch fixes bug #1012 where the job is canceled because
59 of Max Run Time exceeded when the job has not yet started.
61 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
62 one 'part' to write. Instead of each part being stored on disk,
63 written to DVD, then deleted from disk, all parts are written to disk,
64 and only the last is written and deleted from disk.
65 kes This patch fixes the status command to include the formating string for
66 JS_AttrInsterting. It fixes bug #1021.
67 kes This patch should fix the Mac OS X build problem on the latest
68 Darwin, where sys/types.h was not included correctly (apparently
69 due to a change in the Mac headers). The solution was to explicitly
70 ensure that it is defined for the ./configure.
71 This patch also has a rebuild of configure that includes the Debian
72 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
73 kes This patch should ensure that queued messages to the console are
74 displayed as soon as possible. It should fix bug 1007, but has been
77 kes This patch fixes the infinite loop when trying to increase the
78 maximum number of volumes in a Pool during the add command.
79 This patch fixes bug #1008.
83 db Remove extra data on estimate command in joblist for bat.
85 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
86 really change anything, but is the beginning of doing it *right*.
87 To do it completely right the LastWritten date must be passed to
88 the SD, but it is not yet done.
89 kes Minor tweaks to some bat restore SQL.
90 kes This patch fixes bug #1003 where putting the message output from
91 a Verify job into the catalog results in a recursive loop. The problem
92 seems to show up only with postgresql (to be verified).
93 kes Correct %x to %p in postgresql debug statement.
95 kes Fix bug #942 where lots of emails where generated when the heartbeat
96 interval was low and Bacula wanted a different tape from the one in
99 ebl Add new SD despooling attributes and Dir inserting attributes
100 job status codes in the catalog (Status table).
102 ebl Use qmake-qt4 instead of qmake when available (debian system).
104 kes Add a security warning to src/cats/make_catalog_backup.in indicating
105 that passing the password via the command line (arg 3) is insecure.
106 This responds to bug #990 (it doesn't fix it).
108 kes Set default debug_level to zero. This corrects bugs #991 and #993.
109 kes Fix a crash in bat when it cannot connect to the Director for example
110 if the Director is not running.
111 kes Remove redundant INDEX (JobId) from File table in the trunk.
113 kes Make explicit exception to GPL in LICENSE to permit linking
114 the Win32 FD with Microsoft VSS code.
115 kes Apply the Solaris package patch from
116 Masopust, Christian <christian.masopust@siemens.com>
117 kes Apply the patch to optionally add a timestamp in the debug output
118 submitted by Mariusz Czulada <manieq@wp.eu>.
120 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
121 backend (sql_strerror). Fixes bug #989
123 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
124 It applied with no problems.
125 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
127 kes Redirect stderror to stdin on mt status command in mtx-changer.in
128 since the status is returned on stderr on Solaris.
129 kes Activate Close button on tray-monitor window. This fixes
131 kes Check for NULL item in parse_conf.c before calling it. In the
132 case of Device, there is no item and this caused a seg fault when
133 Device appears in the conf file.
134 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
135 avoids pulling in config.h multiple times in some new code.
137 kes Fix spurious warning message printed when creating a volume with
138 a LabelFormat. This fixes bug #976.
140 Release Version 2.2.5
142 kes Add JobId in place of Job name in all the Jmsg() output.
143 kes Correct the APP_DESC for the Win32 storage service (remove an e).
145 kes Make maxvol-test and new more strict maxvol2-test work.
146 kes Print JobId in all Jmsg() job output.
148 kes Add new SD despooling attributes and Dir inserting attributes
149 job status codes. This fixes bug 961.
150 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
152 kes Fix doc issue. This fixes bug #963.
153 kes Fix listing performance problems in bat. Pointed out by
155 kes Remove old debug code.
156 kes Fix bat code that tests for Win32. This should fix bug #968
157 kes Query 5 list wrong Vol after migration. This fixes bug #960
159 ebl Fix #969 where user can't change Replace option in restore menu.
161 kes Save jcr in thread specific data (tsd) for each thread.
162 kes Make Dmsg() print JobId as -%u.
163 kes Make Jmsg, Emsg, and others automatically pickup the jobid
164 for the thread if it exists.
165 kes Remove old reservation debug jid code.
166 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
167 ebl Add an option that permit to specify spool size in job
168 definition. (Applying patches/testing/spoolsize_per_job.patch).
169 You must upgrade SD and DIR at the same time.
170 dvl Add new configuration item --archivedir
171 dvl Adjust regression tests to use tmp not /tmp. This will allow
172 multiple concurrent runs of the regression tests.
174 kes Fix race condition that drops final block written to volume.
175 This happens in rare cases with multiple simultaneous jobs
176 when the Volume fills. This fixes bug #964. May be related
177 to bug #935 and possibly #903.
178 kes Eliminate more strerror() and replace with bstrerror().
179 kes Remove BSD getopt and replace with unrestricted IBM version.
180 kes Fix Win32 build for changed calling sequences.
181 kes More tweaks to the mount volume routines to get everything
182 right. Changed variable name from find to have_vol, which is
183 much easier to understand.
184 kes Enhance btimer debug code.
186 kes Fix FD->SD authorization failure, which was due to spurious
187 wakeups from a pthread_cond_timedwait(). Simply check the
188 predicate before continuing. This fixes bug #953.
189 kes Add const char where needed (more to do). Remove temp debug code.
191 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
192 kes Don't overwrite error message in check_tables_version.
194 kes Unlock batch insert tables with same calls used elsewhere.
195 kes Allow starting 59 jobs a second.
196 kes Make SD session key more random.
197 kes Add retry for SQLite opening db if it fails. Probably helps
199 kes Suppress extra error messages during batch insert failure.
201 kes Add jcr to timer packets so if killed message can be sent to job.
202 kes Add JobId to all Dmsg() output.
203 kes Put some FD auth code on dbglvl rather than fixed.
204 kes Return insert attributes error message in db msg buffer to avoid
205 false error messages. Helps fix bug #966.
206 kes Separate batch init error messages. Probably helps fix bug #966.
207 kes Make SD code that contructs attribute insert check string lengths
209 kes If Dir gets an error during inserting attributes, cancel SD.
210 This reduces unnecessary error messages.
212 kes Correct search boolean for getting Volume info
213 ebl Cleanup batch insert code. Probably fixes bug #965.
214 kes Back out one small change to the reservation system (reserving a volume).
215 kes Rework how a Volume is mounted. It is now much more intelligent and
216 will always attempt to use any mounted volume if possible and reduces
217 calls to the Director asking about volumes.
219 kes Turn off some code when batch insert not enabled.
220 kes Edit FD name in connect error messages.
221 kes Rework the reservation system to take into account that the Director
222 might give us a Volume that is different from the current one being
223 used, and to ensure that we don't exceed Maximum Volume Jobs.
224 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
225 fatal error with multiple jobs running'
226 kes Add more debug code in reservation system.
227 kes Implement maxvol-test to check bug #947.
229 kes Add code to handle tray monitor separated from Win32 FD.
230 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
232 kes Add missed return in fixing verify bug -- trunk only.
233 ebl Fix a command parser issue causing a director segfault.
234 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
236 kes Increase the max block size to 4MB fixes bug #957.
237 kes ERABT if user sets min block size > max block size. Fixes bug #956.
238 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
239 is not properly mounted (recognized) during a poll.
240 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
241 Job that has differences reports Verify OK.
242 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
244 ebl Add an option to operate on all pools with update vol parameters.
245 This complete the project 20. Patch from Nigel Stepp.
246 ebl Add history support to bconsole when using readline.
247 Using Ctrl-D to exit doesn't update .bconsole_history
248 kes Modify new volume algorithm to use max MediaId for generating next
249 volume number rather than the count of Volumes. This should essentially
250 eliminate the failure rate if some volumes were deleted. Bug #921.
251 kes Begin implemention of Optimize Job Scheduling.
252 kes Implement restore callback that Dirk and I agreed on for bat
253 restore. This fixes bug #928. Restore of backup of zero files fails.
254 kes Fix SQL Catalog logging which broke with new db_escape_string
257 Release Version 2.2.4
259 kes Fix bacula_cats.def for new db_escape_string().
260 kes Increase size of name string when FD making connection to SD.
261 May fix bug #953. FD->SD connection failure.
263 kes Add code to help Dan debug 2drive-incremental-2disk test.
264 kes Add code to try to fix bug #908.
265 kes Add waits to multiple exit detection code to try to force pid
266 file to always be deleted.
267 kes Restore good dev.tar.gz to rescue set appropriate binary property.
269 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
270 trying to switch drives by checking for blocking before unblocking.
272 kes Cancel storage daemon in all cases where FD reports error. This
273 should fix virtually all cases of bug #920.
274 kes Fix db_escape_string() for MySQL which did not compile.
276 kes Fix error message that was clobbered when Dir tells SD it does not
277 have write permission on Volume. This should fix a minor point
278 in bug #942, but not the main problem.
279 kes Add code to cancel job in SD if FD connection fails. This should
281 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
282 dvl Pass jcr and db into db_escape_string() to enable better escaping
284 kes Fix migration code to get correct Volume name with multiple volumes
285 by skipping |. Fixes bug #936.
286 kes Implement patch supplied by Landon to fix bug #944 where using
287 TLS with bconsole uses 99+% of the CPU.
288 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
290 kes Move patches into patches directory.
292 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
295 ebl Using 'm' in bconsole will show messages like before,
296 and not memory usage.
297 kes Fix bug #935, and probably also bug #903 where files were not
298 restored. MediaId was not properly set in JobMedia record after
301 kes Suppress chown and chmod error messages if the FD is not running
304 kes Apply Martin Simmons' patch that should turn off the new API usage
305 when batch insert is turned off allowing building on older
307 kes Add ./configure search in qwt-qt4 for qwt package
309 kes Bacula is now free of 3rd party GPL copyrighted code!
311 kes Add guid_to_name.c/h which replace idcache.
312 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
314 ebl Detect if new PosgreSQL batch insert API is present.
315 kes Correct incorrect mempool call causing Director crash. Occurs on
316 systems without va_copy().
317 sb Update spec files for 2.2.1 release
319 kes Fix memory pool call in ua_output.c. bug #934.
320 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
321 Add test program to fnmatch.c
323 kes Integrate patch to README.vc8 from
324 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
325 edit it to get it into Unix patch format.
326 kes Implement mkpath.c to replace old FSF makepath.c
328 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
330 Release Version 2.2.1
332 kes Update POTFILES.in
333 kes Cleanup a few underquoted AC_DEFUNs in configure
334 kes Apply patch from Martin Simmons that adds a test for va_copy to
337 kes Fix bug #921 by increasing the number of tries to create a new volume
339 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
340 can be called multiple times. Implement a version for machines
341 without va_copy() that gets a big buffer.
343 kes Integrate more portable zone offset code into bsmtp.c
344 Submitted by Attila Fülöp.
346 kes Fix bad SD->FD return status reported by
347 (James Harper) <james.harper@bendigoit.com.au>
348 ebl Fix a bug in read_close_session which return random status
349 thanks to James Harper
351 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
352 and directory names during restore of single file/directories.
353 kes Add sanity checks to .sql command when string is empty. Hopefully
354 that will resolve Dirks Director crash.
356 kes Apply patch submitted by Martin Simmons that corrects a seg fault
357 in the bsmtp chat subroutine when debug is >= 10.
359 kes Fix Director crash when running bat SQL queries.
360 kes Add David's notes on Item 8: Copy pools.
362 kes Rework projects file to be current and ready for a vote.
363 kes Enhance lex scanner error message.
365 kes Tweak LICENSE file to mention BSD code.
366 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
367 if specified on the ./configure.
368 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
369 This class is intended to allow us to open a second bsock to the
370 Director while in the restore subdialog.
372 kes Fix configure to create bat Makefile before creating dependencies.
373 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
374 kes Add a tooltip to the tray monitor.
375 dvl Set the Director's PID file before dropping privs. This fixes
378 kes Update AUTHORs file
379 kes Increase the default max concurrent jobs to 20 in FD and SD to
380 correspond with the default .conf files.
381 kes Rewrite the Win32 service routines. This eliminates the 3 copies
382 some different, of the same file created by RN when porting the
384 kes Rearrange some of the Win32 directories and the placement of the files
386 kes Set DEVELOPER flag in version.h
388 ========================================================================
389 Release Version 2.2.0
391 kes Apply a second doc patch from Marc.
392 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
393 improves the tips section that discusses how to setup multiple
396 kes Update bat README file.
397 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
398 corrects a typo in the Recycle status check in db_find_next_volume().
399 This will probably fix a number of annoying problems with multiple
401 kes Modify most of dird/msgchan.c to use bsock class calls rather than
402 bnet calls -- no functionality change.
404 kes Modify the Verify output to specify if files are missing on
405 the Volume(s) or disk. Fixes confusion in bug #916.
406 kes When more than one Volume is read in a migration job, the last
407 Volume bytes reported are from the last read volume rather than
408 the last written volume. Fixed. This fixes bug #910.
409 kes Fix display of Recycle flag after update volume=foo recycle=yes.
410 It previously printed New Recyle flag is: no. This fixes bug
413 kes Correct seg fault when switching tape drives during restore.
414 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
415 be used until after 2.2.0 release.
417 kes Remove fnmatch() in SD that permitted wild card specifications.
420 kes Fix %g in filename returned by SQL for browse tree reported by
422 kes Fix configure so that it puts config.out in the cwd rather than
424 kes Attempt to fix the locking problem reported by Eric in bug #906.
425 kes Make berrno class to leave errno unchanged after constructor call.
426 kes Make bnet_server use the heap rather than the stack to allocate
427 its socket fd pointers to avoid a crash at termination. Problem
428 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
430 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
431 and putting it in depkgs-qt along with Qt4.3.
433 kes Rework code in acquire.c that switches drives for reading when
434 the Media Type does not match. This should fix bug #906
436 ebl Fix a director segfault during job setup #907
437 kes Correct seg fault in postgresql when first operation returns no
438 rows. Fixes Dirks File browser problem seg fault with bat.
440 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
441 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
444 kes Implement PopUp YES/NO dialog for bat.
446 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
448 kes Correct RunScript to terminate job in FD on failure.
449 kes Change abort_on_error and AbortJobOnError to fail_on_error
450 and FailJobOnError in RunScripts.
451 kes Minor tweaks of code formating in RunScripts, principally to
452 avoid depassing 80 columns.
454 kes Eliminate one #ifdef Win32 in bsmtp
455 kes Implement grow tool to grow a file for testing very large databases.
456 kes Add big-vol-test to test Bacula seeking with > 5GB.
459 kes Modify find_next_volume() to return all values in Media record.
460 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
464 kes Update Release notes
466 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
467 Warning, in previous beta version, all media get from scratch keep their
470 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
471 This should fix bug #842. Made a note to look at removing the temp
472 files at the end of the install.
473 kes Add ability to mount and unmount a file device providing it is
474 marked as being removable and has the appropriate mount and unmount
475 commands defined in the Device resource. This fixes bug #830.
476 kes When applying a storage override, release all previous storage
477 definitions rather than just prepending the new storage.
478 This should prevent a good deal of confusion.
480 kes Implement ./configure search for qwt libraries.
482 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
483 Win32 FD. This should fix bug #893.
484 kes Remove an unnecessary beep in Win32 init code.
485 kes Update copyright dates in Win32 executable about boxes.
486 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
487 code with a BSD getopt.c and getopt.h.
488 kes Remove sched.h from the Win32 compat directory -- not used.
489 kes Remove the Exit menu item from the Win32 tray monitor. If you really
490 need to shut it down, do it through the services panel or the command
492 kes Remove some inappropriate Bacula FSFE copyrights.
493 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
494 kes Fix regress config non-portable test as pointed out by
495 Florian Heigl <florian.heigl@gmail.com>
496 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
497 as pointed out by Florian Heigl <florian.heigl@gmail.com>
499 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
500 Reported by Frank Sweetser.
504 kes Fix client-only build.
505 kes Integrate client-only fixes for bsys (initgroups) and conio from
506 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
507 kes Make arguments to get_scratch_volume() in same order as other
509 kes Rework the prune_volumes() subroutine so that after purging and
510 no volume found in desired pool, it will check for a scratch
511 volume. This prevents recycling the whole scratch pool.
512 kes Add code to status storage to print boffset_t (largefile support).
514 kes Move qwt (Graphics libarary for Qt4) to depkgs.
515 kes You now need a --with-qwt=<dir> to be able to build bat.
516 kes Update src/win32/cats/bacula_cats.def to include the new
517 db_get_query_dbids() call on Win32.
519 kes Correct a problem when selecting a scratch volume and moving
520 it to another pool that lost some columns.
521 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
522 kes Enhance Autochanger error messages to include Volume and device name.
523 kes Rework prune_volumes() code to take account of InChanger flag,
524 and to handle recycling volumes going to the Scratch pool and
525 current pool because the RecyclePool directive.
526 kes Implement a better and more efficient db_get_query_dbids() to
527 handle creating and passing back a list of DBIds.
531 kes Start work on new more efficient DBId subroutine. First use
532 will be for recycling volume to Scratch inchanger.
533 kes Increase number of JobIds in pruning from 1000 to 10000.
534 This to be replaced by above routine.
535 kes Begin implementation of building Qt4 on Win32.
536 kes Correct typo in fix I added for bad TLS shutdown.
537 kes Pull 2.0.3 patches into patches directory.
538 kes Update Release notes. Include qt-console in line count.
539 kes Update Projects file.
541 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
542 bug in migration code where a job that spanned two volumes
545 kes Implement new BST_DESPOOLING blocked state. Change from locking
546 during despooling in SD to blocking. This means that other threads
547 can work with the device structure, in particular the reservations
548 system while despooling.
550 kes Fix return in reservation message queue that missed clearing
551 the jcr lock (implemented 26Jun07 below).
552 kes Rename a number of dev methods to make locking function names
554 kes Document locking in lock.c. Move lock structures to new file
557 kes Move reservations message lock to lock jcr only this
559 kes Move main SD locking code into lock.c (new file).
560 kes Update Win32 build to include lock.c
564 kes Dirk committed the qwt library code for drawing graphs in bat.
565 kes Tweak install of qwt so that it is integrated with ./configure.
567 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
568 out by Eric (my typo).
569 ebl Fix configure.in to get batch mode enable
570 kes Return correct string from authenticate.cpp in bat when connecting
572 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
573 spurious line drops when using TLS.
574 kes Do not file reparse points when restoring a file that already
577 kes Implement Windows reparse points -- similar to directories, but
578 we do not descend into it. This is a first cut. They seem to
579 be backed up, but restore is not yet tested.
580 kes Remove restore_blocking in tls code when shutting a socket to leave
581 it in blocking mode. Hopefully this will fix the encryption bug
582 reported by Frank Sweetser.
583 kes When opening a file for backup, tell the OS that we are going to
584 read it sequentially -- optimization.
585 kes Change variable names in authenticate_director() to not conflict
586 with member names in bat. Caused great confusion with compiler,
589 kes Queue openssl error messages in case of comm problem.
590 kes Do shutdown() call if socket terminated.
591 kes Remove some duplicated code in tls.c
592 kes Move more of the bsock member variables into private and access
594 kes Add Frank Sweetser's tls-test to the regression suite.
596 kes Add Swedish sv.po file
598 kes Don't print clock skew message in FD if less than 3 seconds diff.
599 kes Add a bit of VSS info to status client.
600 kes Implement a first cut of Vista VSS, using Win2003 code.
604 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
605 loaded tape but uses first drive).
606 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
607 This was indeed a Win32 issue.
609 kes Simplify search of autochanger for in-use Volume.
610 kes Fix exit condition of check for in-use volume. kes Remove
611 inappropriate my_postgresql_free_result() in db_close()
613 kes Fix bad return in FD when encryption signature not found.
614 Probably caused a crash.
615 kes Inhibit missing encryption signature error messages for
616 file types where no signature computed.
617 kes Correct inverted check on autochanger in reservation system.
618 kes Tweak debug code in autochanger reservation.
620 kes Add some additional locking in the cats directory in subroutines
621 that modify packet variables called from batch insert.
622 kes Rework how dcrs are allocated. new_dcr() can now be called
623 with an existing pointer, and it will simply clean it up.
624 This allows the reservation system to test various different
625 devices, and will permit easy device changes.
626 kes A bunch of changes all over to handle new new_dcr() calling
628 kes Work more on the Volume management in the SD. Remember Volumes
629 for tape drives and for autochangers (even virtual disk changers).
630 kes When looking at the Volume list to reserve a drive, handle
631 autochanger names correctly by interating through the changer
632 devices. Also call the Director to see if a Volume is suitable
634 kes Fix some bugs in bscan. Make sure all media records are written.
635 Make sure that valid JobMedia records are written for disk files.
636 Previously they were completely wrong.
637 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
638 that the URLs don't change and so that the developers will all
639 work off the same copy. Rebuild from scrach.
640 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
644 kes Fix seg fault in FD from incorrect digest size.
645 kes Fix argument to non-OpenSSL crypto.c subroutine.
649 kes Remove a few malloc()s from the encryption code.
650 kes Use the class calls to bsock in filed/backup.c and restore.c in
651 place of the old bnet_xxx code.
652 kes Implement code that does an on the fly calculation of the
653 signing digest during restore of encrypted files. It makes
654 a best guess at the algorithm, and if it is not correct, will
655 then revert to the old code which reads the file after it is
657 kes Implement at least one missing crypto stream in stream_to_ascii()
658 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
659 #877 where a reload with bad syntax causes Dir to exit.
661 Cut: 2.1.14 beta (not released)
663 kes Do not free a volume on a tape drive until another volume is
664 mounted and read, or the autochanger unloads the volume.
665 This should help the SD re-use volumes that are already mounted,
666 and should fix bug #886.
667 kes Apply patch from user brettedgar that allows gnome2-console include
668 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
669 kes Apply patch from Lucien Weller that fixes day of week calculation
670 because of DST flag problem. Fixes bug #887.
672 kes Move find_next_appendable_volume() to after acquiring a valid device
673 in reserve.c. This fixes bug #864 -- confirmed by reporter.
675 kes Unable to reproduce bug 872. However added additional testing for
677 kes Bug #874 resolved by documenting SQLite limitations.
678 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
679 kes Bug #881 resolved by removing typo in mtx-changer script.
680 kes Made Frank Sweetser's wiki the official Bacula wiki with his
681 approval. Added a link to the wiki on the web page, and implemented
682 a backup from http://paramount.ind.wpi.edu
684 kes Fix update allfrompool to pass pool name.
686 kes Convert to pure GPL v2 license.
687 kes Fix sscanf problems reported by Peter Buschman that caused
688 a bus error on Solaris.
689 kes Rework (simplify) the select prompt in bat.
690 kes Move get_jobid_from_tid() into lib and create a
692 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
693 should definitely fix the problem of lost error messages in the
695 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
696 kes Eliminate tcpd.h from the project. Enclose the #include from the
697 library with extern C ...
698 kes Add print of signal name when a signal is trapped.
702 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
704 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
705 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
706 makes SQLit3 run 30 times faster, though a bit less safe.
707 kes Implement --with-batch-insert in configure and detection of thread
708 safe libraries. It is on by default, but turned off if no thread
709 safe library (e.g. SQLite 2) is available.
711 kes Fix Bacula PostgreSQL buffer overruns.
712 kes Do better checking for NULL results returned from PostgreSQL;
713 implement retry for failed queries; clear results buffer after
714 failed query. Hopefully this will correct the PostgreSQL failures.
716 kes Implement algorithm to handle only one appendable volume with
717 Prefer Mounted Volumes = no.
718 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
719 returned from a query.
720 kes Make volume lock recursive.
721 kes Implement an additional volume reservation algorithm that
722 starts by considering all reserved volumes then uses the
723 old brute force algorithm of searching the resources to
724 find a suitable device.
725 kes Add new reservations debug code and refine the old code.
726 kes Update the win32/dll/bacula.defs file.
728 kes Tweak reservations algorithm to permit a few more cases, i.e.
729 volume reserved, but on different drive, ...
730 kes Enhance SD status to include Pool and Media Type for drive in a
731 more readable format (a bit longer).
732 kes Fix PostgreSQL double free.
734 kes Minor refactoring of restore decryption code.
735 kes Add code to smartall.c to detect double free of a buffer.
737 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
738 so that bsmtp will create a correct email address (mailbox only).
739 kes Modify 'memory' command so that the buffers are listed as 'In use'
740 to avoid confusion with Orphaned buffers.
741 kes I reworked the OpenSSL include/lib flags to be handled in
742 the standard Bacula way, which should fix bug #863 concerning
743 non-standard OpenSSL libraries.
745 kes Implement Help Browser window for bat.
746 kes Fix reload bug that reset StorageId to zero.
748 kes Fix TLS #ifdefing when TLS turned off.
749 kes Ensure that when labelling a tape with Slot=0 that InChanger
751 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
753 kes Add StartTime to final uar_sel_jobid_temp query so that we can
754 add DISTINCT (required by PostgreSQL).
755 kes Implement BSOCK authenticate_director() method. Eventually will
756 authenicate all daemons.
757 kes Move several more functions into the BSOCK class.
759 kes Add code to tell the OS that we no longer need a cached
760 file that we were reading. In findlib/bfile.c. Also,
761 only cache files that we are reading. Thanks to
762 Tobias Oetiker <tobi@oetiker.ch> for the idea.
763 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
764 kes Implement script to automatically generate cats and dll .def
766 kes Update README.mingw32 to include new .def file generation.
767 kes Correct typo in UTF-8 error message as reported by:
768 jhernandez <julianhernandez@gmail.com>
769 kes Add additional sm_check() code on debug level 1.
770 kes Set default debug level to 1.
771 kes Trap SIGABRT in attempt to get traceback.
773 kes Reduce bat connect timeout from 30 to 15 seconds.
774 kes More restructuring and implementing BSOCK class in place of
776 kes Remove a few unnecessary malloc() tests in crypto code.
777 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
778 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
779 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
781 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
783 kes Fix Verify InitCatalog. The attributes were not pointing to the
784 correct saved location.
785 kes Implement message callback so that GUI is sure to get all
786 daemon messages. Currently displayed in a dialog in bat.
787 kes Ignore SIGUSR2 (Bacula timer) in bat.
788 kes Apply regress patch from bug #859 to allow regress to work
789 with Solaris compiler.
791 kes Begin adding TLS support to bat.
792 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
793 clean up lex.c and make it more readable.
795 kes Move more bnet functions into the BSOCK class.
796 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
797 kes Complete change of berrno strerror() method to bstrerror()
801 kes Cleanup incorrect email addresses in bsmtp.
802 kes Make bat display initial messages rather than discard them.
804 kes First cut of adding .mod to the run command.
805 kes Implement auto display of messages in bat.
806 kes Enhanced preferences to allow all Bacula output to be
809 kes Try to make bsmtp date routines more generic.
810 kes Fixed bug #856 autochanger documentation.
811 kes Rework bsmtp date editing for Win32. This fixes bug #854.
812 kes Add new cats entry point so Win32 builds.
814 kes Attempt to fix bsmtp date editing on OSes without %z editing.
816 kes Do better checking for the MySQL 64 bit libraries looking for both
817 .a and .so libraries.
818 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
819 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
820 kes Require the thread safe version of MySQL during configure. Thanks
821 to Andre Noll for pointing this out.
822 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
823 continuing in migration code.
824 kes Apply implementation of tray-monitor font derived from gnome-console
825 submitted by Andreas Piesk <a.piesk@gmx.net>
827 kes Eliminate important memory loss in SQLite
828 kes Fixed the batch insert MySQL thread specific data that was not
829 being freed. See cats/mysql.c:db_thread_cleanup().
830 kes Fix restore before command.
831 kes Convert old hdr.name to name() in a few places.
832 kes Implement update jobid command.
833 kes Return all time_t dates in db_get_job_record()
834 kes Stop watchdog in SD earlier.
835 kes Put Pool just after Storage in please mount message.
836 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
839 kes Update the po files.
840 kes Fix Verify InitCatalog by making it cache attributes.
842 kes Change name bacula-bat to bat for man 1 page to correspond to
844 kes Check for client and store NULL pointers in status command. This
846 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
847 kes Fix sign extended editing of %p.
848 kes Clean out a little old #ifdefing in cats/mysql.c
850 kes If time diff between DIR and FD is more than 600 seconds convert
851 INFO message to WARNING.
852 kes Implement heap size display in status for all daemons.
853 kes Attempt to fix MySQL db open memory loss (not successfull).
854 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
855 kes Eliminate memory loss in MySQL (possibly other SQLs) during
856 Query. This looks like a MySQL but but by doing extra releases,
857 the memory goes away. This should fix bug #847.
859 kes When backup fails, cancel SD before waiting for sd termination.
860 kes If SD is waiting for FD to connect during cancel, wake up the
862 kes Fix fsf code so that errno is correctly reported.
863 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
865 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
866 so that Bacula doesn't later stumble into a seg fault.
867 kes Use the term Restore Client in the restore Job report.
868 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
869 the original job's FileSetId.
870 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
871 spooling in migration jobs. Not yet tested.
872 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
873 reading conf file from a pipe. However, do it with open_bpipe()
874 rather than popen. Not yet tested.
876 kes Fix an ugly bug where the VolCatBytes were getting updated
878 kes Implement bconsole memory command that prints current memory
879 usage, plus smartalloc dump.
880 kes Clarify some error messages in backup, admin, and migrate.
881 kes Shrink label dialog to smaller size.
882 kes Invert Cancel OK buttons on restore to be OK Cancel.
883 kes More strerror() to bstrerror() conversions.
885 kes Start implementing bstrerror() in place of strerror().
886 kes Stripping path -- seems to work.
888 kes Prevent door and port files from being restored (mostly
890 kes Free an unreleased buffer in compat code.
891 kes Change console Job name from *Console* to -Console- to eliminate
892 Win32 filename problems. Put Win32 path separator when creating
893 Console file. This fixes bug #846.
894 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
896 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
898 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
899 to force Win32 error message.
901 kes First cut strip path. The data should be passed to the FD,
902 but nothing is done with it yet.
903 kes Enhance the digest and signature routines in the crypto
904 library to accept a JCR and to use it to print error messages
905 so that they will go in the Job report rather than the daemon's
907 kes Simplify some of the verify signature code.
908 kes Simplify a few of the alternative returns in the signature
911 ebl Use only POSIX regex instead of GNU regex in breg.c for
912 File relocation. It fix broken freebsd compilation.
913 kes Convert all other Dir files to use new ua class message
915 kes Tentative fix for missing digest signature in bug 807.
916 kes Correct handle problem in new win32_ftruncate routine.
917 kes Convert ua_purge.c and ua_update.c to use new ua class
918 message routines for bat.
920 kes Correct incorrect installation of LICENSE in Win32 installer.
921 kes Display LICENSE at the beginning of the Win32 install.
922 kes Attempt to correct the need for the png files to be installed
924 kes Reapply my bat.conf install script in qt-console. I think I
925 editted bat.pro instead of bat.pro.in and it was lost.
926 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
927 the /var/lock/subsys for subsysdir. Also corrects typos in the
930 kes First cut update job.
931 kes Correct configure to include qmake of src/qt-console directory.
933 kes Make restore job yes/mod/no print in one command so GUI works.
934 kes First cut implementing backup and restore client.
935 kes Correct editing in Verify output that caused a seg fault.
937 kes Insure that bat.conf is not overwritten during installation.
938 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
939 while I was implementing migration in March 2006 !
941 ebl Cleanup file relocation, using char *RegexWhere instead of
942 char *where + bool where_use_regexp
943 kes Update some manpages and add bat manpage.
944 kes Make a first cut at converting bacula.spec.in for bwx-console
946 kes Apply patch from John Goerzen to add hostname as fourth argument
947 to make_catalog_backup script.
948 kes Fix typos I introduced into bsmtp.c
949 kes Make pm_strxxx() routines handle input of NULL pointer. This
950 is to protect from NULL pointers returned from SQL databases.
951 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
952 kes Add more debug to FIFO code -- fix fifo regression test.
954 kes Implement posix_fadvise in FD, and for reading spool files in SD.
955 kes Add thread timer to bnet_connect() to break from OS if wait time
958 kes Update Win32 build to include new files, new symbols, and
960 kes Implement socket level heartbeat (tcp_keepidle)
961 ebl Commit File relocation patch
962 kes Make bat have 'make install' target.
963 kes Warn during install if old gnome-console binary found.
964 kes Warn during install if old wx-console binary found.
965 kes Add -8 option to bsmtp command line to add content type utf-8.
966 Fixes bug #809. (Character coding problem in bsmtp).
967 kes If < is found in target (from, to, cc) then do not enclose the
968 target in < > in bsmtp. Fixes bug #772 (malformed address).
969 kes When printing certain items in dbcheck, stop after 300000.
970 Fixes bug #822. (dbcheck loops).
971 kes Incorrect status in Dir after waiting for mount with poll set.
974 kes Extend idea of Prefer Mounted Volumes to mean a volume about
976 kes Print waiting to reserve a device every 5 mins.
978 kes Don't call close_part in label.c if tape and relabel.
979 kes Don't free volume if busy in close() -- should help with
981 ebl Fix #824 RunScript bug (After script could be execute twice)
982 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
983 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
984 Add a regression script to test RunScript
986 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
989 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
990 deprecated. No additional bugs will be fixed, and they will be dropped
991 in a future release (probably 2.4.0).
992 kes Change name of wx-console to bwx-console to make it more Bacula
994 kes Change the name of gnome-console to bgnome-console to make it
997 kes Some time in March, a Feature Request with patch from Jorj Bauer
998 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1000 The ability for the director to validate a Client (FD) CN against
1001 an arbitrary set of patterns rather than the hostname, with
1002 A new 'TLS Allowed CN' set of directives which are implemented
1003 in the Client resource. Then pattern matching is used in place
1004 of hostname matching against the Certificate's CN. As an example, we
1005 have certificates which (a) use a local CA, and (b) have a CN of the
1007 kes Add new/changed entry points to Win32 build
1008 kes Create unaccepted-projects for projects that are not accepted.
1009 kes Simplify locking in the reservations system.
1010 kes Add more debug code in reservations.
1011 kes Make sure error condition on reserving a volume is handled correctly.
1012 kes Correct handling of volume_in_use.
1013 kes Correct handling of initializing a device.
1014 kes Move handling of broadcasting releasing a device into release_device().
1015 kes Correct attaching dcr to dev so that it is only done if device
1016 is properly initiated.
1018 kes Locking debug level tweaks in SD.
1019 kes Tweak new Volume code.
1021 kes Add exec external-command [wait-seconds] to bconsole. This
1022 executes the external-command. Note! normally external-command
1023 should be enclosed in double quotes.
1024 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1025 it should normally be off in a production system.
1027 kes Implement die command for SD so that we can force it to dump.
1028 kes Implement SD lock debug code.
1029 kes Implement new algorithm for keeping Volume list in SD. It
1030 is now owned by the device.
1032 kes Implement new code for freeing in use volumes that should
1033 resolve if not all, some of the problems of multiple drive
1034 tape conflicts described in bug 801.
1036 kes Fix gui/bacula-web/images files in svn.
1037 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1039 ebl Fix a bug in batch mode (in string escape)
1040 kes Correct migration prune SQL typo that crept in in a
1041 recent 2.1.x change.
1043 kes Move bnet_despool() into class in bsock.c
1044 kes Modify job report to include director name and Build OS.
1045 kes Move drop root privilege and check_catalog() before fork.
1046 kes Add update database scripts (version 9 to 10) to updatedb directory.
1048 ebl Check size and age of each file after its backup to see if
1049 it has changed during backup, if 'checkfilechanges' is set.
1050 The FD will do an extra check (stat(2)) after
1051 each file backup. mtime, ctime and size are compared with
1052 'before backup' information. If time or size mismatch, an
1053 error message will be generated. You must upgrade FD to use it.
1055 kes Make database name and user configurable
1056 --with-db-name=xxx --with-db-user=xxx
1057 kes Add back database type to message.c for debugging.
1059 kes Implement dir_sql() which issues an SQL query.
1060 kes Modify bat medialist to use dir_sql() and do some minor C++
1061 formatting as well as eliminating a number of pointers, simplifing
1064 kes Fix some of the mtx-changer grep commands for tape label readers.
1065 kes Convert a number of bsendmsg into the appropriate send/warning/error
1066 message class calls.
1067 kes Suppress the using database message in the .sql command.
1068 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1070 kes Add context menu for floating a window.
1071 kes Some minor cleanup and name changes in qt-console
1072 kes Add doing mt setblk 0 in Win32 mtx-changer.
1073 kes Apply Martin's bug fix to move definition of ENODATA for
1075 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1076 sqlite2 and sqlite3.
1078 kes More pruning cleanup.
1079 kes Turn on wait_for_drive by default in mtx-changer.
1080 kes Turn on Batch insert code by default as it now passes regression.
1081 kes Add ./configure --enable-bat to enable building of Bat.
1082 No install yet though.
1084 kes Implement a new .sql command for bat.
1085 kes Implement code to turn off pruning in obtaining the next volume.
1086 Pruning is turned off for the status dir command, but turned on
1087 for SD requests and for the list nextvolume command.
1089 kes Correct Qmsg() that was not updated correctly when committing a
1090 previous change (probably the recent TLS patch).
1092 kes Write new subroutine is_volume_purged() that explicitly checks
1093 if the Volume is purged, and if so marks it as such. This should
1094 resolve problems reported about needing to mount twice to recycle
1096 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1097 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1098 amount of duplicated code.
1099 kes Do volume pruning only for the Media Type desired (reduces pruning time
1100 if multiple Media Types are in the same pool).
1101 kes Implement more detailed info in the Job report for the Bacula version
1103 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1105 ebl Add bbatch tool to bench database and insert mode.
1106 Fix sql quote stuff in batch mode
1107 Fix sql stuff for mysql
1109 kes Correct problems with am/pm scheduling. Fixes bug #808.
1110 kes Implement new prunning code that prunes up to 1000 jobs at
1111 the same time. The same technique can be applied to a number
1112 of other prune/purge subroutines.
1113 kes Add an insanity check when starting a new tape job to ensure
1114 that the tape position has not been changed. If so fail the
1116 kes Fix Win32 build for dlls to add the folllowing:
1117 src/lib/bsock.c -- new file with new entry points
1118 src/lib/dlist.c -- new entry points
1119 src/cats/sql_create.c -- new entry point
1120 src/cats/sql_cmds.c -- new DATA item exported
1122 ebl batch mode cleanup bscan-test is ok now.
1123 kes Implement SD code to check length of disk volume before appending.
1125 kes Correct return status on db_batch... routines.
1126 kes Add call to db_write_batch_file_records() to migration code.
1127 ebl Fix AfterJob timing
1128 kes Move the checking of the database in initializion of the Director
1129 to after we drop privileges. This avoids the need for both root
1130 and bacula access to the DB.
1131 kes Correct a misplaced variable definition in src/filed/backup.c
1132 kes Correct how the new batch insert db_create_attributes_record()
1133 uses the arguments. Caused a seg fault in bscan.
1134 kes Implement lock() and unlock() methods in DEVICE class.
1135 Implement block() and set_block(xx) methods in DEVICE class.
1136 kes Modify bnet_connect() so that it uses time() to check for the
1137 wait time expiring (on some OSes, some system calls may not
1138 return immediately).
1139 kes Modify Verify to obtain the previous JobId when it is actually
1140 running rather than at schedule time (as it was in 1.38.x).
1141 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1143 kes When checking pid in pid file, continue running if the pid is
1144 the same as ours. This occurs on IRIX after a system crash.
1147 kes Extend new GUI API.
1148 kes Make the ua structure a class, and implement send_msg(),
1149 error_msg(), warning_msg(), and info_msg().
1151 kes Apply fix from for building wx-console on the Mac from
1153 kes Implement new select mechanism for GUI programs.
1154 kes Reorganize initialization of stackedWidgets in bat.
1156 kes Add updated nagios plugin supplied by Christian Masopust.
1158 kes More bat implementation.
1159 kes File migrate bug with Pool Occupancy using mediaid instead
1160 of jobids. Fixes bug #795.
1161 kes Fix orphaned buffers in filed backup and verify due to
1162 crypto buffers not freed during errors. Fixes bug #789.
1163 kes Extend new GUI api code to tree commands.
1164 kes Ensure that tree and dot commands check console ACLs.
1165 kes Permit marking directory with trailing slash.
1166 kes Allow 20 console connections (instead of only 10).
1168 kes Add smartctl call to bacula-sd.conf as an example of getting
1171 kes Modify jobq.c to let simultaneous restore jobs run. This may
1172 cause them to fail if they cannot get a drive.
1173 kes Add Client Connect Wait to Storage daemon to permit users to
1174 modify the time the SD waits for a FD connection.
1176 kes Correct virtual changer check which was backwards. This caused
1177 volumes to be unloaded into slots already occupied.
1179 kes Apply Command ACL filter to JobId list in restore command.
1180 kes Correct typeo in var.c patch.
1182 kes Don't let Bacula prune File or Job records for the current Job.
1183 kes Fix variable substitution pad + inc bug reported (with patch)
1186 kes Correct SQLite log table index as reported by Luca Berra.
1188 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1190 kes Begin implementing new comm signals for API.
1191 kes Fix a few places in lib/message.c where the open fd may
1193 kes Continue implementing lib/bsock.c (real class). Make jcr,
1194 who, host, and port private. There are new methods to access
1195 them for non-class use. This required touching a number of files.
1197 kes Add LANG=C to autoconf/randpass so it works with languages other
1198 than English. Fixes bug #788.
1200 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1202 You will not be able to generate Include/Exclude list any more.
1203 It will be fixed soon.
1204 If you want to use this, you can apply
1205 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1207 kes Restore of sockets created false error messages because Bacula
1208 no longer restores sockets, but the code was still trying to
1209 set the attributes on a non-existent file. Reported by a user.
1210 ebl finish RecyclePool feature
1211 Media will takes Pool.RecyclePool
1212 when moving from Scratch to a Pool or when user will do
1213 update volume=xxx frompool
1214 To use it, add RecyclePool = aPool to your Pool resource
1217 RecyclePool = Scratch
1221 kes Expand new BSOCK class adding signal() and new BNET signals.
1222 kes Begin enhancing the dot commands adding a new API function
1223 that returns more information and will make it easier
1224 to interface to the Director from a program.
1226 kes Make DEVICE fd private. Its new name is m_fd, and can be
1227 obtained with dev->fd() outside the class. This is the
1228 first of many DEVICE members to be made private.
1229 kes Implement Michael Renner's idea on having a virtual disk
1230 changer. I made some minor modifications (e.g. I did not
1231 implement the Virtual Changer directive, but simply set
1232 the Changer Command to an empty string.
1234 kes Implement a BSOCK send() method that writes the whole record
1235 in a single write() request rather than in two.
1236 ebl add update volume=xxx recyclepool=yyyy
1237 volume takes recyclepool from pool when using update volume=xxx from pool
1239 kes Fix encryption deblocking bug, which caused some restored files
1240 to be truncated. This fixes bug #763.
1241 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1242 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1244 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1245 ebl Use btime_t instead of uint64_t in media patch.
1247 kes Optimize the use of the database a bit in the Status dir command.
1248 Only open it when needed, ensure that if any previous database
1249 was opened, it is closed.
1251 kes Correct VolCatBytes bug from media patch.
1252 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1253 in the case of orphaned records.
1254 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1255 and File records in 300K chunks to be more efficient. This
1256 idea came from Juan Luis Frances (if I remember right).
1257 kes Apply Eric's scratch patch that moves a purged Volume to
1258 the RecyclePool. Question: how is RecyclePool set? what
1259 happens to the ScratchPool?
1260 kes Apply Eric's media patch that collects read/write media
1261 times as well as byte counts. This patch requires a
1262 simultaneous upgrade of the DIR and SD. Note, there
1263 should be some way to turn off timing. I'm not sure
1264 times are in Bacula units.
1265 kes Apply Eric's batch-insert patch.
1267 kes Update projects list.
1269 kes Implement Include/Exclude file lists in FD as dlists using
1270 the new dlistString class. This permits efficiently having
1271 large include/exclude lists and completes project Item 25.
1272 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1273 console is authorized to cancel the job. This fixes bug
1275 kes Modify SD so that the VolCatJobs medium record is updated
1276 at the beginning of a Job rather than the end. This
1277 fixes bug #775 where exceeding MaxVolJobs caused jobs
1279 kes Added a mutex around getting and setting Volume information
1280 so that multiple simultaneous jobs will single thread.
1282 Switch to using Subversion
1283 kes Remove src/pygtk-console/ from configure
1285 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1286 plus the entrypoints.
1287 kes Apply patch supplied that corrects debug print
1288 in canceling jobs for max run time. Supplied as
1289 part of bug #621, which was previously fixed.
1291 kes Test on job_canceled() and sd_msg_thread_done inside
1292 loop starting the message thread to avoid a race condition.
1294 kes Remove rl_catch_signal from console.c as it conflicted
1295 with the header definition. Fixes bug #765.
1296 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1298 kes Clarify some stored/acquire messages to indicate if the
1299 problem is with read or append.
1301 kes Fix memory leak with storage ids in cats/sql_get.c
1302 kes Terminate watchdog earlier to avoid reference to released
1303 memory -- reported by Jason Austin.
1304 kes Move closing the database from jobq.c to the director daemon
1305 termination routine. This fixes memory leaks for shadow jobs
1306 (i.e. migration jobs).
1307 kes Free up the unique jobid chain items in migrate.c. This fixes
1308 a memory leak problem.
1309 kes Convert some ugly looking for statements to use foreach_alist
1310 in findlib/find.c. This will facilitate converting the structures
1311 to use dlist (for large include/exclude lists).
1312 kes Fix a bug in the btree.c and btree.h routines, then rename them
1313 rblist and add them to be built in src/lib. Include some new
1314 methods written by Rudolf Cejka that make the code more readable
1315 (hides some of the ugly casting).
1316 kes Add set_next() and set_prev() methods which make the code much more
1317 readable. Also add a new dlistString class that facilitates storing
1318 strings in dlists. To be used in the large include/exclude lists.
1319 kes Make some trivial modifications to lib/tree.h that use rblist
1320 rather than dlist for storing the tree links. This was suggested
1321 by Rudolf Cejka. The result of this is that the restore tree now
1322 uses red-black binary trees rather than simple linked lists. This
1323 should give rather dramatic speed improvements for directories
1324 contining large numbers of directories/files (more than 10000).
1326 kes Fix maxruntime bug #621.
1328 ebl Implement the include JobID in spool file name project.
1329 kes Reorder projects file in order determined by Jan 2007 vote.
1330 kes Implement item #12 on project list -- quick release of FD by
1332 kes Fix open of SQLite3 db where user does not have write permission
1333 so that DIR does not crash. Fixes bug #761.
1335 kes Add back missing @ in Win32 Makefile.
1336 kes Change 'Device not configured to autolabel' from INFO
1338 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1339 which should restart an indefinite # of times.
1340 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1341 other DIR specifications.
1343 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1344 Fix path quoting in SQLite scripts.
1345 Fix problems with SHGetFolderPath.
1347 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1349 kes Fix Job restart on error bug that promotes an Inc to a Full
1350 backup. This should fix bug #755.
1351 kes Add qt-console and first cut of code.
1355 kes Fix Bacula->Documentation link on Win32 to point to index.html
1356 instead of bacula.html. Fixed bug #750.
1357 kes Return JobId in db_get_job_record() when JobId==0. This should
1359 kes Do not release source pointers when restarting a failed job.
1361 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1362 This *should* fix bug #747.
1363 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1366 kes Modify USTORE constructor to set an empty store_source string,
1367 and don't copy the store_source string in a cancel. Hopefully
1368 this will fix Arno's seg fault, bug #744.
1369 kes Add back code to disable conio in configure. Fixes bug #743.
1370 kes Correct the Options scanner in the FD to correctly handle
1371 SHA1 option, which was eating the next option. Reported by
1373 kes Add code to indicate when the SD is spooling, spool wait, and
1374 despooling as requested by Alan Brown.
1376 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob