1 Technical notes on version 2.3
5 kes Undo recent reservations changes ... will apply them later
7 kes Fix bsnprintf for float point numbers. I broke recently when
8 parameterizing some variables.
10 ebl Fixes #1034 which cause mysql to hang the connection after 8h
11 ebl Change default statistics target of filename.name and path.path
12 fields for PostgreSQL. This speeds lookup by indexes. Thanks
14 kes A few more tweaks to new reservation code. Make sure to clear
15 vol released flag when retaking volume. When reading label and
16 label is bad mark volume unused. When recycling, mark volume
17 unused so it can be renamed.
19 kes Fix reserve_volume() so it doesn't release a volume in use
20 (i.e. a volume entry not marked released). This should be
21 the last part needed to fix bug #1018.
23 kes Move Heartbeat documentation from Job to Director resource.
26 kes Fix existing switch drive SD code to call autochanger to release
27 any old volume. This must be done to keep the autochanger from
28 releasing subsequently newly reserved volumes in doing a close().
29 This should fix bug #1018.
30 kes Fail if attempting to get console input in batch mode. This
31 should help fail RunScript console commands that are incomplete.
32 kes First cut implementing switch_drive() in SD (not actually called).
34 kes Implement first cut running console commands in a RunScript.
36 ebl Fixes bug #1028 where "Selection Type" option was not usable
38 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
41 kes Add new free_tls() entry point so that Win32 builds.
42 kes Fix compile warning in src/lib/util.c
43 kes Fix entry point for edit_job_codes() so that Win32 builds.
44 kes Fix seg fault Frank Sweetser reports in regression testing
45 on his systems. The problem was that the original author of
46 bsnprintf.c did not take into account the side effects of
47 using ++x in the argument to a #define.
48 kes Make SD protocol backward compatible with version 2.2.x.
50 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
51 because Bacula no longer restores sockets.
52 ebl Always use ignorecase fileset option on win32 FD.
54 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
55 that implements double quoting include names in conf files,
56 and also allows piping input by having the first character
57 be a vertical bar (|).
58 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
59 that implement %f in RunScripts to pass the FileSet name.
60 kes Skip leading | when lex input comes from a pipe as suggested
61 by Michael Stapelberg <michael@stapelberg.de>.
63 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
64 Nerijus Baliunas <nerijus@users.sourceforge.net>
66 kes Implement Plugin Directory and plugin events.
68 kes Implement a security enhancement: TLS authentication but no
69 encryption. Enabled by setting 'TLS Authentication = yes'.
70 Note when this is on, TLS encryption is turned OFF!
72 kes This patch corrects a problem where the maximum concurrent storage
73 jobs counter gets out of sync during restore jobs causing jobs to
74 'wait on max Storage jobs'. This patch fixes bug #1009.
76 kes This patch fixes bcopy so that it produces correct Volumes.
78 kes This patch eliminates spurious output to the console during a VerifyVolume
79 job that contains encrypted data. It fixes bug #1024.
81 kes This patch prevents the 'status dir' command from trying to use a scratch
82 volume and possibly moving it from one pool to another. This patch fixes
85 kes Add new include to postgresql.c suggested by Marc Cousins so
86 that it compiles correctly with pgre version 8.3.
88 kes Fix --archivedir addition to configure. Replace it with
89 --with-archivedir in configure.in This fixes the regression
91 kes This patch fixes bug #1012 where the job is canceled because
92 of Max Run Time exceeded when the job has not yet started.
94 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
95 one 'part' to write. Instead of each part being stored on disk,
96 written to DVD, then deleted from disk, all parts are written to disk,
97 and only the last is written and deleted from disk.
98 kes This patch fixes the status command to include the formating string for
99 JS_AttrInsterting. It fixes bug #1021.
100 kes This patch should fix the Mac OS X build problem on the latest
101 Darwin, where sys/types.h was not included correctly (apparently
102 due to a change in the Mac headers). The solution was to explicitly
103 ensure that it is defined for the ./configure.
104 This patch also has a rebuild of configure that includes the Debian
105 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
106 kes This patch should ensure that queued messages to the console are
107 displayed as soon as possible. It should fix bug 1007, but has been
108 reported not to work.
110 kes This patch fixes the infinite loop when trying to increase the
111 maximum number of volumes in a Pool during the add command.
112 This patch fixes bug #1008.
114 Release Version 2.2.6
116 db Remove extra data on estimate command in joblist for bat.
118 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
119 really change anything, but is the beginning of doing it *right*.
120 To do it completely right the LastWritten date must be passed to
121 the SD, but it is not yet done.
122 kes Minor tweaks to some bat restore SQL.
123 kes This patch fixes bug #1003 where putting the message output from
124 a Verify job into the catalog results in a recursive loop. The problem
125 seems to show up only with postgresql (to be verified).
126 kes Correct %x to %p in postgresql debug statement.
128 kes Fix bug #942 where lots of emails where generated when the heartbeat
129 interval was low and Bacula wanted a different tape from the one in
132 ebl Add new SD despooling attributes and Dir inserting attributes
133 job status codes in the catalog (Status table).
135 ebl Use qmake-qt4 instead of qmake when available (debian system).
137 kes Add a security warning to src/cats/make_catalog_backup.in indicating
138 that passing the password via the command line (arg 3) is insecure.
139 This responds to bug #990 (it doesn't fix it).
141 kes Set default debug_level to zero. This corrects bugs #991 and #993.
142 kes Fix a crash in bat when it cannot connect to the Director for example
143 if the Director is not running.
144 kes Remove redundant INDEX (JobId) from File table in the trunk.
146 kes Make explicit exception to GPL in LICENSE to permit linking
147 the Win32 FD with Microsoft VSS code.
148 kes Apply the Solaris package patch from
149 Masopust, Christian <christian.masopust@siemens.com>
150 kes Apply the patch to optionally add a timestamp in the debug output
151 submitted by Mariusz Czulada <manieq@wp.eu>.
153 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
154 backend (sql_strerror). Fixes bug #989
156 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
157 It applied with no problems.
158 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
160 kes Redirect stderror to stdin on mt status command in mtx-changer.in
161 since the status is returned on stderr on Solaris.
162 kes Activate Close button on tray-monitor window. This fixes
164 kes Check for NULL item in parse_conf.c before calling it. In the
165 case of Device, there is no item and this caused a seg fault when
166 Device appears in the conf file.
167 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
168 avoids pulling in config.h multiple times in some new code.
170 kes Fix spurious warning message printed when creating a volume with
171 a LabelFormat. This fixes bug #976.
173 Release Version 2.2.5
175 kes Add JobId in place of Job name in all the Jmsg() output.
176 kes Correct the APP_DESC for the Win32 storage service (remove an e).
178 kes Make maxvol-test and new more strict maxvol2-test work.
179 kes Print JobId in all Jmsg() job output.
181 kes Add new SD despooling attributes and Dir inserting attributes
182 job status codes. This fixes bug 961.
183 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
185 kes Fix doc issue. This fixes bug #963.
186 kes Fix listing performance problems in bat. Pointed out by
188 kes Remove old debug code.
189 kes Fix bat code that tests for Win32. This should fix bug #968
190 kes Query 5 list wrong Vol after migration. This fixes bug #960
192 ebl Fix #969 where user can't change Replace option in restore menu.
194 kes Save jcr in thread specific data (tsd) for each thread.
195 kes Make Dmsg() print JobId as -%u.
196 kes Make Jmsg, Emsg, and others automatically pickup the jobid
197 for the thread if it exists.
198 kes Remove old reservation debug jid code.
199 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
200 ebl Add an option that permit to specify spool size in job
201 definition. (Applying patches/testing/spoolsize_per_job.patch).
202 You must upgrade SD and DIR at the same time.
203 dvl Add new configuration item --archivedir
204 dvl Adjust regression tests to use tmp not /tmp. This will allow
205 multiple concurrent runs of the regression tests.
207 kes Fix race condition that drops final block written to volume.
208 This happens in rare cases with multiple simultaneous jobs
209 when the Volume fills. This fixes bug #964. May be related
210 to bug #935 and possibly #903.
211 kes Eliminate more strerror() and replace with bstrerror().
212 kes Remove BSD getopt and replace with unrestricted IBM version.
213 kes Fix Win32 build for changed calling sequences.
214 kes More tweaks to the mount volume routines to get everything
215 right. Changed variable name from find to have_vol, which is
216 much easier to understand.
217 kes Enhance btimer debug code.
219 kes Fix FD->SD authorization failure, which was due to spurious
220 wakeups from a pthread_cond_timedwait(). Simply check the
221 predicate before continuing. This fixes bug #953.
222 kes Add const char where needed (more to do). Remove temp debug code.
224 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
225 kes Don't overwrite error message in check_tables_version.
227 kes Unlock batch insert tables with same calls used elsewhere.
228 kes Allow starting 59 jobs a second.
229 kes Make SD session key more random.
230 kes Add retry for SQLite opening db if it fails. Probably helps
232 kes Suppress extra error messages during batch insert failure.
234 kes Add jcr to timer packets so if killed message can be sent to job.
235 kes Add JobId to all Dmsg() output.
236 kes Put some FD auth code on dbglvl rather than fixed.
237 kes Return insert attributes error message in db msg buffer to avoid
238 false error messages. Helps fix bug #966.
239 kes Separate batch init error messages. Probably helps fix bug #966.
240 kes Make SD code that contructs attribute insert check string lengths
242 kes If Dir gets an error during inserting attributes, cancel SD.
243 This reduces unnecessary error messages.
245 kes Correct search boolean for getting Volume info
246 ebl Cleanup batch insert code. Probably fixes bug #965.
247 kes Back out one small change to the reservation system (reserving a volume).
248 kes Rework how a Volume is mounted. It is now much more intelligent and
249 will always attempt to use any mounted volume if possible and reduces
250 calls to the Director asking about volumes.
252 kes Turn off some code when batch insert not enabled.
253 kes Edit FD name in connect error messages.
254 kes Rework the reservation system to take into account that the Director
255 might give us a Volume that is different from the current one being
256 used, and to ensure that we don't exceed Maximum Volume Jobs.
257 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
258 fatal error with multiple jobs running'
259 kes Add more debug code in reservation system.
260 kes Implement maxvol-test to check bug #947.
262 kes Add code to handle tray monitor separated from Win32 FD.
263 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
265 kes Add missed return in fixing verify bug -- trunk only.
266 ebl Fix a command parser issue causing a director segfault.
267 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
269 kes Increase the max block size to 4MB fixes bug #957.
270 kes ERABT if user sets min block size > max block size. Fixes bug #956.
271 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
272 is not properly mounted (recognized) during a poll.
273 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
274 Job that has differences reports Verify OK.
275 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
277 ebl Add an option to operate on all pools with update vol parameters.
278 This complete the project 20. Patch from Nigel Stepp.
279 ebl Add history support to bconsole when using readline.
280 Using Ctrl-D to exit doesn't update .bconsole_history
281 kes Modify new volume algorithm to use max MediaId for generating next
282 volume number rather than the count of Volumes. This should essentially
283 eliminate the failure rate if some volumes were deleted. Bug #921.
284 kes Begin implemention of Optimize Job Scheduling.
285 kes Implement restore callback that Dirk and I agreed on for bat
286 restore. This fixes bug #928. Restore of backup of zero files fails.
287 kes Fix SQL Catalog logging which broke with new db_escape_string
290 Release Version 2.2.4
292 kes Fix bacula_cats.def for new db_escape_string().
293 kes Increase size of name string when FD making connection to SD.
294 May fix bug #953. FD->SD connection failure.
296 kes Add code to help Dan debug 2drive-incremental-2disk test.
297 kes Add code to try to fix bug #908.
298 kes Add waits to multiple exit detection code to try to force pid
299 file to always be deleted.
300 kes Restore good dev.tar.gz to rescue set appropriate binary property.
302 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
303 trying to switch drives by checking for blocking before unblocking.
305 kes Cancel storage daemon in all cases where FD reports error. This
306 should fix virtually all cases of bug #920.
307 kes Fix db_escape_string() for MySQL which did not compile.
309 kes Fix error message that was clobbered when Dir tells SD it does not
310 have write permission on Volume. This should fix a minor point
311 in bug #942, but not the main problem.
312 kes Add code to cancel job in SD if FD connection fails. This should
314 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
315 dvl Pass jcr and db into db_escape_string() to enable better escaping
317 kes Fix migration code to get correct Volume name with multiple volumes
318 by skipping |. Fixes bug #936.
319 kes Implement patch supplied by Landon to fix bug #944 where using
320 TLS with bconsole uses 99+% of the CPU.
321 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
323 kes Move patches into patches directory.
325 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
328 ebl Using 'm' in bconsole will show messages like before,
329 and not memory usage.
330 kes Fix bug #935, and probably also bug #903 where files were not
331 restored. MediaId was not properly set in JobMedia record after
334 kes Suppress chown and chmod error messages if the FD is not running
337 kes Apply Martin Simmons' patch that should turn off the new API usage
338 when batch insert is turned off allowing building on older
340 kes Add ./configure search in qwt-qt4 for qwt package
342 kes Bacula is now free of 3rd party GPL copyrighted code!
344 kes Add guid_to_name.c/h which replace idcache.
345 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
347 ebl Detect if new PosgreSQL batch insert API is present.
348 kes Correct incorrect mempool call causing Director crash. Occurs on
349 systems without va_copy().
350 sb Update spec files for 2.2.1 release
352 kes Fix memory pool call in ua_output.c. bug #934.
353 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
354 Add test program to fnmatch.c
356 kes Integrate patch to README.vc8 from
357 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
358 edit it to get it into Unix patch format.
359 kes Implement mkpath.c to replace old FSF makepath.c
361 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
363 Release Version 2.2.1
365 kes Update POTFILES.in
366 kes Cleanup a few underquoted AC_DEFUNs in configure
367 kes Apply patch from Martin Simmons that adds a test for va_copy to
370 kes Fix bug #921 by increasing the number of tries to create a new volume
372 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
373 can be called multiple times. Implement a version for machines
374 without va_copy() that gets a big buffer.
376 kes Integrate more portable zone offset code into bsmtp.c
377 Submitted by Attila Fülöp.
379 kes Fix bad SD->FD return status reported by
380 (James Harper) <james.harper@bendigoit.com.au>
381 ebl Fix a bug in read_close_session which return random status
382 thanks to James Harper
384 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
385 and directory names during restore of single file/directories.
386 kes Add sanity checks to .sql command when string is empty. Hopefully
387 that will resolve Dirks Director crash.
389 kes Apply patch submitted by Martin Simmons that corrects a seg fault
390 in the bsmtp chat subroutine when debug is >= 10.
392 kes Fix Director crash when running bat SQL queries.
393 kes Add David's notes on Item 8: Copy pools.
395 kes Rework projects file to be current and ready for a vote.
396 kes Enhance lex scanner error message.
398 kes Tweak LICENSE file to mention BSD code.
399 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
400 if specified on the ./configure.
401 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
402 This class is intended to allow us to open a second bsock to the
403 Director while in the restore subdialog.
405 kes Fix configure to create bat Makefile before creating dependencies.
406 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
407 kes Add a tooltip to the tray monitor.
408 dvl Set the Director's PID file before dropping privs. This fixes
411 kes Update AUTHORs file
412 kes Increase the default max concurrent jobs to 20 in FD and SD to
413 correspond with the default .conf files.
414 kes Rewrite the Win32 service routines. This eliminates the 3 copies
415 some different, of the same file created by RN when porting the
417 kes Rearrange some of the Win32 directories and the placement of the files
419 kes Set DEVELOPER flag in version.h
421 ========================================================================
422 Release Version 2.2.0
424 kes Apply a second doc patch from Marc.
425 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
426 improves the tips section that discusses how to setup multiple
429 kes Update bat README file.
430 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
431 corrects a typo in the Recycle status check in db_find_next_volume().
432 This will probably fix a number of annoying problems with multiple
434 kes Modify most of dird/msgchan.c to use bsock class calls rather than
435 bnet calls -- no functionality change.
437 kes Modify the Verify output to specify if files are missing on
438 the Volume(s) or disk. Fixes confusion in bug #916.
439 kes When more than one Volume is read in a migration job, the last
440 Volume bytes reported are from the last read volume rather than
441 the last written volume. Fixed. This fixes bug #910.
442 kes Fix display of Recycle flag after update volume=foo recycle=yes.
443 It previously printed New Recyle flag is: no. This fixes bug
446 kes Correct seg fault when switching tape drives during restore.
447 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
448 be used until after 2.2.0 release.
450 kes Remove fnmatch() in SD that permitted wild card specifications.
453 kes Fix %g in filename returned by SQL for browse tree reported by
455 kes Fix configure so that it puts config.out in the cwd rather than
457 kes Attempt to fix the locking problem reported by Eric in bug #906.
458 kes Make berrno class to leave errno unchanged after constructor call.
459 kes Make bnet_server use the heap rather than the stack to allocate
460 its socket fd pointers to avoid a crash at termination. Problem
461 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
463 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
464 and putting it in depkgs-qt along with Qt4.3.
466 kes Rework code in acquire.c that switches drives for reading when
467 the Media Type does not match. This should fix bug #906
469 ebl Fix a director segfault during job setup #907
470 kes Correct seg fault in postgresql when first operation returns no
471 rows. Fixes Dirks File browser problem seg fault with bat.
473 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
474 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
477 kes Implement PopUp YES/NO dialog for bat.
479 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
481 kes Correct RunScript to terminate job in FD on failure.
482 kes Change abort_on_error and AbortJobOnError to fail_on_error
483 and FailJobOnError in RunScripts.
484 kes Minor tweaks of code formating in RunScripts, principally to
485 avoid depassing 80 columns.
487 kes Eliminate one #ifdef Win32 in bsmtp
488 kes Implement grow tool to grow a file for testing very large databases.
489 kes Add big-vol-test to test Bacula seeking with > 5GB.
492 kes Modify find_next_volume() to return all values in Media record.
493 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
497 kes Update Release notes
499 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
500 Warning, in previous beta version, all media get from scratch keep their
503 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
504 This should fix bug #842. Made a note to look at removing the temp
505 files at the end of the install.
506 kes Add ability to mount and unmount a file device providing it is
507 marked as being removable and has the appropriate mount and unmount
508 commands defined in the Device resource. This fixes bug #830.
509 kes When applying a storage override, release all previous storage
510 definitions rather than just prepending the new storage.
511 This should prevent a good deal of confusion.
513 kes Implement ./configure search for qwt libraries.
515 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
516 Win32 FD. This should fix bug #893.
517 kes Remove an unnecessary beep in Win32 init code.
518 kes Update copyright dates in Win32 executable about boxes.
519 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
520 code with a BSD getopt.c and getopt.h.
521 kes Remove sched.h from the Win32 compat directory -- not used.
522 kes Remove the Exit menu item from the Win32 tray monitor. If you really
523 need to shut it down, do it through the services panel or the command
525 kes Remove some inappropriate Bacula FSFE copyrights.
526 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
527 kes Fix regress config non-portable test as pointed out by
528 Florian Heigl <florian.heigl@gmail.com>
529 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
530 as pointed out by Florian Heigl <florian.heigl@gmail.com>
532 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
533 Reported by Frank Sweetser.
537 kes Fix client-only build.
538 kes Integrate client-only fixes for bsys (initgroups) and conio from
539 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
540 kes Make arguments to get_scratch_volume() in same order as other
542 kes Rework the prune_volumes() subroutine so that after purging and
543 no volume found in desired pool, it will check for a scratch
544 volume. This prevents recycling the whole scratch pool.
545 kes Add code to status storage to print boffset_t (largefile support).
547 kes Move qwt (Graphics libarary for Qt4) to depkgs.
548 kes You now need a --with-qwt=<dir> to be able to build bat.
549 kes Update src/win32/cats/bacula_cats.def to include the new
550 db_get_query_dbids() call on Win32.
552 kes Correct a problem when selecting a scratch volume and moving
553 it to another pool that lost some columns.
554 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
555 kes Enhance Autochanger error messages to include Volume and device name.
556 kes Rework prune_volumes() code to take account of InChanger flag,
557 and to handle recycling volumes going to the Scratch pool and
558 current pool because the RecyclePool directive.
559 kes Implement a better and more efficient db_get_query_dbids() to
560 handle creating and passing back a list of DBIds.
564 kes Start work on new more efficient DBId subroutine. First use
565 will be for recycling volume to Scratch inchanger.
566 kes Increase number of JobIds in pruning from 1000 to 10000.
567 This to be replaced by above routine.
568 kes Begin implementation of building Qt4 on Win32.
569 kes Correct typo in fix I added for bad TLS shutdown.
570 kes Pull 2.0.3 patches into patches directory.
571 kes Update Release notes. Include qt-console in line count.
572 kes Update Projects file.
574 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
575 bug in migration code where a job that spanned two volumes
578 kes Implement new BST_DESPOOLING blocked state. Change from locking
579 during despooling in SD to blocking. This means that other threads
580 can work with the device structure, in particular the reservations
581 system while despooling.
583 kes Fix return in reservation message queue that missed clearing
584 the jcr lock (implemented 26Jun07 below).
585 kes Rename a number of dev methods to make locking function names
587 kes Document locking in lock.c. Move lock structures to new file
590 kes Move reservations message lock to lock jcr only this
592 kes Move main SD locking code into lock.c (new file).
593 kes Update Win32 build to include lock.c
597 kes Dirk committed the qwt library code for drawing graphs in bat.
598 kes Tweak install of qwt so that it is integrated with ./configure.
600 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
601 out by Eric (my typo).
602 ebl Fix configure.in to get batch mode enable
603 kes Return correct string from authenticate.cpp in bat when connecting
605 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
606 spurious line drops when using TLS.
607 kes Do not file reparse points when restoring a file that already
610 kes Implement Windows reparse points -- similar to directories, but
611 we do not descend into it. This is a first cut. They seem to
612 be backed up, but restore is not yet tested.
613 kes Remove restore_blocking in tls code when shutting a socket to leave
614 it in blocking mode. Hopefully this will fix the encryption bug
615 reported by Frank Sweetser.
616 kes When opening a file for backup, tell the OS that we are going to
617 read it sequentially -- optimization.
618 kes Change variable names in authenticate_director() to not conflict
619 with member names in bat. Caused great confusion with compiler,
622 kes Queue openssl error messages in case of comm problem.
623 kes Do shutdown() call if socket terminated.
624 kes Remove some duplicated code in tls.c
625 kes Move more of the bsock member variables into private and access
627 kes Add Frank Sweetser's tls-test to the regression suite.
629 kes Add Swedish sv.po file
631 kes Don't print clock skew message in FD if less than 3 seconds diff.
632 kes Add a bit of VSS info to status client.
633 kes Implement a first cut of Vista VSS, using Win2003 code.
637 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
638 loaded tape but uses first drive).
639 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
640 This was indeed a Win32 issue.
642 kes Simplify search of autochanger for in-use Volume.
643 kes Fix exit condition of check for in-use volume. kes Remove
644 inappropriate my_postgresql_free_result() in db_close()
646 kes Fix bad return in FD when encryption signature not found.
647 Probably caused a crash.
648 kes Inhibit missing encryption signature error messages for
649 file types where no signature computed.
650 kes Correct inverted check on autochanger in reservation system.
651 kes Tweak debug code in autochanger reservation.
653 kes Add some additional locking in the cats directory in subroutines
654 that modify packet variables called from batch insert.
655 kes Rework how dcrs are allocated. new_dcr() can now be called
656 with an existing pointer, and it will simply clean it up.
657 This allows the reservation system to test various different
658 devices, and will permit easy device changes.
659 kes A bunch of changes all over to handle new new_dcr() calling
661 kes Work more on the Volume management in the SD. Remember Volumes
662 for tape drives and for autochangers (even virtual disk changers).
663 kes When looking at the Volume list to reserve a drive, handle
664 autochanger names correctly by interating through the changer
665 devices. Also call the Director to see if a Volume is suitable
667 kes Fix some bugs in bscan. Make sure all media records are written.
668 Make sure that valid JobMedia records are written for disk files.
669 Previously they were completely wrong.
670 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
671 that the URLs don't change and so that the developers will all
672 work off the same copy. Rebuild from scrach.
673 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
677 kes Fix seg fault in FD from incorrect digest size.
678 kes Fix argument to non-OpenSSL crypto.c subroutine.
682 kes Remove a few malloc()s from the encryption code.
683 kes Use the class calls to bsock in filed/backup.c and restore.c in
684 place of the old bnet_xxx code.
685 kes Implement code that does an on the fly calculation of the
686 signing digest during restore of encrypted files. It makes
687 a best guess at the algorithm, and if it is not correct, will
688 then revert to the old code which reads the file after it is
690 kes Implement at least one missing crypto stream in stream_to_ascii()
691 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
692 #877 where a reload with bad syntax causes Dir to exit.
694 Cut: 2.1.14 beta (not released)
696 kes Do not free a volume on a tape drive until another volume is
697 mounted and read, or the autochanger unloads the volume.
698 This should help the SD re-use volumes that are already mounted,
699 and should fix bug #886.
700 kes Apply patch from user brettedgar that allows gnome2-console include
701 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
702 kes Apply patch from Lucien Weller that fixes day of week calculation
703 because of DST flag problem. Fixes bug #887.
705 kes Move find_next_appendable_volume() to after acquiring a valid device
706 in reserve.c. This fixes bug #864 -- confirmed by reporter.
708 kes Unable to reproduce bug 872. However added additional testing for
710 kes Bug #874 resolved by documenting SQLite limitations.
711 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
712 kes Bug #881 resolved by removing typo in mtx-changer script.
713 kes Made Frank Sweetser's wiki the official Bacula wiki with his
714 approval. Added a link to the wiki on the web page, and implemented
715 a backup from http://paramount.ind.wpi.edu
717 kes Fix update allfrompool to pass pool name.
719 kes Convert to pure GPL v2 license.
720 kes Fix sscanf problems reported by Peter Buschman that caused
721 a bus error on Solaris.
722 kes Rework (simplify) the select prompt in bat.
723 kes Move get_jobid_from_tid() into lib and create a
725 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
726 should definitely fix the problem of lost error messages in the
728 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
729 kes Eliminate tcpd.h from the project. Enclose the #include from the
730 library with extern C ...
731 kes Add print of signal name when a signal is trapped.
735 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
737 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
738 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
739 makes SQLit3 run 30 times faster, though a bit less safe.
740 kes Implement --with-batch-insert in configure and detection of thread
741 safe libraries. It is on by default, but turned off if no thread
742 safe library (e.g. SQLite 2) is available.
744 kes Fix Bacula PostgreSQL buffer overruns.
745 kes Do better checking for NULL results returned from PostgreSQL;
746 implement retry for failed queries; clear results buffer after
747 failed query. Hopefully this will correct the PostgreSQL failures.
749 kes Implement algorithm to handle only one appendable volume with
750 Prefer Mounted Volumes = no.
751 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
752 returned from a query.
753 kes Make volume lock recursive.
754 kes Implement an additional volume reservation algorithm that
755 starts by considering all reserved volumes then uses the
756 old brute force algorithm of searching the resources to
757 find a suitable device.
758 kes Add new reservations debug code and refine the old code.
759 kes Update the win32/dll/bacula.defs file.
761 kes Tweak reservations algorithm to permit a few more cases, i.e.
762 volume reserved, but on different drive, ...
763 kes Enhance SD status to include Pool and Media Type for drive in a
764 more readable format (a bit longer).
765 kes Fix PostgreSQL double free.
767 kes Minor refactoring of restore decryption code.
768 kes Add code to smartall.c to detect double free of a buffer.
770 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
771 so that bsmtp will create a correct email address (mailbox only).
772 kes Modify 'memory' command so that the buffers are listed as 'In use'
773 to avoid confusion with Orphaned buffers.
774 kes I reworked the OpenSSL include/lib flags to be handled in
775 the standard Bacula way, which should fix bug #863 concerning
776 non-standard OpenSSL libraries.
778 kes Implement Help Browser window for bat.
779 kes Fix reload bug that reset StorageId to zero.
781 kes Fix TLS #ifdefing when TLS turned off.
782 kes Ensure that when labelling a tape with Slot=0 that InChanger
784 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
786 kes Add StartTime to final uar_sel_jobid_temp query so that we can
787 add DISTINCT (required by PostgreSQL).
788 kes Implement BSOCK authenticate_director() method. Eventually will
789 authenicate all daemons.
790 kes Move several more functions into the BSOCK class.
792 kes Add code to tell the OS that we no longer need a cached
793 file that we were reading. In findlib/bfile.c. Also,
794 only cache files that we are reading. Thanks to
795 Tobias Oetiker <tobi@oetiker.ch> for the idea.
796 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
797 kes Implement script to automatically generate cats and dll .def
799 kes Update README.mingw32 to include new .def file generation.
800 kes Correct typo in UTF-8 error message as reported by:
801 jhernandez <julianhernandez@gmail.com>
802 kes Add additional sm_check() code on debug level 1.
803 kes Set default debug level to 1.
804 kes Trap SIGABRT in attempt to get traceback.
806 kes Reduce bat connect timeout from 30 to 15 seconds.
807 kes More restructuring and implementing BSOCK class in place of
809 kes Remove a few unnecessary malloc() tests in crypto code.
810 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
811 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
812 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
814 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
816 kes Fix Verify InitCatalog. The attributes were not pointing to the
817 correct saved location.
818 kes Implement message callback so that GUI is sure to get all
819 daemon messages. Currently displayed in a dialog in bat.
820 kes Ignore SIGUSR2 (Bacula timer) in bat.
821 kes Apply regress patch from bug #859 to allow regress to work
822 with Solaris compiler.
824 kes Begin adding TLS support to bat.
825 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
826 clean up lex.c and make it more readable.
828 kes Move more bnet functions into the BSOCK class.
829 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
830 kes Complete change of berrno strerror() method to bstrerror()
834 kes Cleanup incorrect email addresses in bsmtp.
835 kes Make bat display initial messages rather than discard them.
837 kes First cut of adding .mod to the run command.
838 kes Implement auto display of messages in bat.
839 kes Enhanced preferences to allow all Bacula output to be
842 kes Try to make bsmtp date routines more generic.
843 kes Fixed bug #856 autochanger documentation.
844 kes Rework bsmtp date editing for Win32. This fixes bug #854.
845 kes Add new cats entry point so Win32 builds.
847 kes Attempt to fix bsmtp date editing on OSes without %z editing.
849 kes Do better checking for the MySQL 64 bit libraries looking for both
850 .a and .so libraries.
851 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
852 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
853 kes Require the thread safe version of MySQL during configure. Thanks
854 to Andre Noll for pointing this out.
855 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
856 continuing in migration code.
857 kes Apply implementation of tray-monitor font derived from gnome-console
858 submitted by Andreas Piesk <a.piesk@gmx.net>
860 kes Eliminate important memory loss in SQLite
861 kes Fixed the batch insert MySQL thread specific data that was not
862 being freed. See cats/mysql.c:db_thread_cleanup().
863 kes Fix restore before command.
864 kes Convert old hdr.name to name() in a few places.
865 kes Implement update jobid command.
866 kes Return all time_t dates in db_get_job_record()
867 kes Stop watchdog in SD earlier.
868 kes Put Pool just after Storage in please mount message.
869 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
872 kes Update the po files.
873 kes Fix Verify InitCatalog by making it cache attributes.
875 kes Change name bacula-bat to bat for man 1 page to correspond to
877 kes Check for client and store NULL pointers in status command. This
879 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
880 kes Fix sign extended editing of %p.
881 kes Clean out a little old #ifdefing in cats/mysql.c
883 kes If time diff between DIR and FD is more than 600 seconds convert
884 INFO message to WARNING.
885 kes Implement heap size display in status for all daemons.
886 kes Attempt to fix MySQL db open memory loss (not successfull).
887 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
888 kes Eliminate memory loss in MySQL (possibly other SQLs) during
889 Query. This looks like a MySQL but but by doing extra releases,
890 the memory goes away. This should fix bug #847.
892 kes When backup fails, cancel SD before waiting for sd termination.
893 kes If SD is waiting for FD to connect during cancel, wake up the
895 kes Fix fsf code so that errno is correctly reported.
896 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
898 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
899 so that Bacula doesn't later stumble into a seg fault.
900 kes Use the term Restore Client in the restore Job report.
901 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
902 the original job's FileSetId.
903 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
904 spooling in migration jobs. Not yet tested.
905 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
906 reading conf file from a pipe. However, do it with open_bpipe()
907 rather than popen. Not yet tested.
909 kes Fix an ugly bug where the VolCatBytes were getting updated
911 kes Implement bconsole memory command that prints current memory
912 usage, plus smartalloc dump.
913 kes Clarify some error messages in backup, admin, and migrate.
914 kes Shrink label dialog to smaller size.
915 kes Invert Cancel OK buttons on restore to be OK Cancel.
916 kes More strerror() to bstrerror() conversions.
918 kes Start implementing bstrerror() in place of strerror().
919 kes Stripping path -- seems to work.
921 kes Prevent door and port files from being restored (mostly
923 kes Free an unreleased buffer in compat code.
924 kes Change console Job name from *Console* to -Console- to eliminate
925 Win32 filename problems. Put Win32 path separator when creating
926 Console file. This fixes bug #846.
927 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
929 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
931 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
932 to force Win32 error message.
934 kes First cut strip path. The data should be passed to the FD,
935 but nothing is done with it yet.
936 kes Enhance the digest and signature routines in the crypto
937 library to accept a JCR and to use it to print error messages
938 so that they will go in the Job report rather than the daemon's
940 kes Simplify some of the verify signature code.
941 kes Simplify a few of the alternative returns in the signature
944 ebl Use only POSIX regex instead of GNU regex in breg.c for
945 File relocation. It fix broken freebsd compilation.
946 kes Convert all other Dir files to use new ua class message
948 kes Tentative fix for missing digest signature in bug 807.
949 kes Correct handle problem in new win32_ftruncate routine.
950 kes Convert ua_purge.c and ua_update.c to use new ua class
951 message routines for bat.
953 kes Correct incorrect installation of LICENSE in Win32 installer.
954 kes Display LICENSE at the beginning of the Win32 install.
955 kes Attempt to correct the need for the png files to be installed
957 kes Reapply my bat.conf install script in qt-console. I think I
958 editted bat.pro instead of bat.pro.in and it was lost.
959 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
960 the /var/lock/subsys for subsysdir. Also corrects typos in the
963 kes First cut update job.
964 kes Correct configure to include qmake of src/qt-console directory.
966 kes Make restore job yes/mod/no print in one command so GUI works.
967 kes First cut implementing backup and restore client.
968 kes Correct editing in Verify output that caused a seg fault.
970 kes Insure that bat.conf is not overwritten during installation.
971 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
972 while I was implementing migration in March 2006 !
974 ebl Cleanup file relocation, using char *RegexWhere instead of
975 char *where + bool where_use_regexp
976 kes Update some manpages and add bat manpage.
977 kes Make a first cut at converting bacula.spec.in for bwx-console
979 kes Apply patch from John Goerzen to add hostname as fourth argument
980 to make_catalog_backup script.
981 kes Fix typos I introduced into bsmtp.c
982 kes Make pm_strxxx() routines handle input of NULL pointer. This
983 is to protect from NULL pointers returned from SQL databases.
984 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
985 kes Add more debug to FIFO code -- fix fifo regression test.
987 kes Implement posix_fadvise in FD, and for reading spool files in SD.
988 kes Add thread timer to bnet_connect() to break from OS if wait time
991 kes Update Win32 build to include new files, new symbols, and
993 kes Implement socket level heartbeat (tcp_keepidle)
994 ebl Commit File relocation patch
995 kes Make bat have 'make install' target.
996 kes Warn during install if old gnome-console binary found.
997 kes Warn during install if old wx-console binary found.
998 kes Add -8 option to bsmtp command line to add content type utf-8.
999 Fixes bug #809. (Character coding problem in bsmtp).
1000 kes If < is found in target (from, to, cc) then do not enclose the
1001 target in < > in bsmtp. Fixes bug #772 (malformed address).
1002 kes When printing certain items in dbcheck, stop after 300000.
1003 Fixes bug #822. (dbcheck loops).
1004 kes Incorrect status in Dir after waiting for mount with poll set.
1007 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1009 kes Print waiting to reserve a device every 5 mins.
1011 kes Don't call close_part in label.c if tape and relabel.
1012 kes Don't free volume if busy in close() -- should help with
1014 ebl Fix #824 RunScript bug (After script could be execute twice)
1015 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1016 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1017 Add a regression script to test RunScript
1019 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1022 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1023 deprecated. No additional bugs will be fixed, and they will be dropped
1024 in a future release (probably 2.4.0).
1025 kes Change name of wx-console to bwx-console to make it more Bacula
1027 kes Change the name of gnome-console to bgnome-console to make it
1030 kes Some time in March, a Feature Request with patch from Jorj Bauer
1031 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1033 The ability for the director to validate a Client (FD) CN against
1034 an arbitrary set of patterns rather than the hostname, with
1035 A new 'TLS Allowed CN' set of directives which are implemented
1036 in the Client resource. Then pattern matching is used in place
1037 of hostname matching against the Certificate's CN. As an example, we
1038 have certificates which (a) use a local CA, and (b) have a CN of the
1040 kes Add new/changed entry points to Win32 build
1041 kes Create unaccepted-projects for projects that are not accepted.
1042 kes Simplify locking in the reservations system.
1043 kes Add more debug code in reservations.
1044 kes Make sure error condition on reserving a volume is handled correctly.
1045 kes Correct handling of volume_in_use.
1046 kes Correct handling of initializing a device.
1047 kes Move handling of broadcasting releasing a device into release_device().
1048 kes Correct attaching dcr to dev so that it is only done if device
1049 is properly initiated.
1051 kes Locking debug level tweaks in SD.
1052 kes Tweak new Volume code.
1054 kes Add exec external-command [wait-seconds] to bconsole. This
1055 executes the external-command. Note! normally external-command
1056 should be enclosed in double quotes.
1057 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1058 it should normally be off in a production system.
1060 kes Implement die command for SD so that we can force it to dump.
1061 kes Implement SD lock debug code.
1062 kes Implement new algorithm for keeping Volume list in SD. It
1063 is now owned by the device.
1065 kes Implement new code for freeing in use volumes that should
1066 resolve if not all, some of the problems of multiple drive
1067 tape conflicts described in bug 801.
1069 kes Fix gui/bacula-web/images files in svn.
1070 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1072 ebl Fix a bug in batch mode (in string escape)
1073 kes Correct migration prune SQL typo that crept in in a
1074 recent 2.1.x change.
1076 kes Move bnet_despool() into class in bsock.c
1077 kes Modify job report to include director name and Build OS.
1078 kes Move drop root privilege and check_catalog() before fork.
1079 kes Add update database scripts (version 9 to 10) to updatedb directory.
1081 ebl Check size and age of each file after its backup to see if
1082 it has changed during backup, if 'checkfilechanges' is set.
1083 The FD will do an extra check (stat(2)) after
1084 each file backup. mtime, ctime and size are compared with
1085 'before backup' information. If time or size mismatch, an
1086 error message will be generated. You must upgrade FD to use it.
1088 kes Make database name and user configurable
1089 --with-db-name=xxx --with-db-user=xxx
1090 kes Add back database type to message.c for debugging.
1092 kes Implement dir_sql() which issues an SQL query.
1093 kes Modify bat medialist to use dir_sql() and do some minor C++
1094 formatting as well as eliminating a number of pointers, simplifing
1097 kes Fix some of the mtx-changer grep commands for tape label readers.
1098 kes Convert a number of bsendmsg into the appropriate send/warning/error
1099 message class calls.
1100 kes Suppress the using database message in the .sql command.
1101 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1103 kes Add context menu for floating a window.
1104 kes Some minor cleanup and name changes in qt-console
1105 kes Add doing mt setblk 0 in Win32 mtx-changer.
1106 kes Apply Martin's bug fix to move definition of ENODATA for
1108 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1109 sqlite2 and sqlite3.
1111 kes More pruning cleanup.
1112 kes Turn on wait_for_drive by default in mtx-changer.
1113 kes Turn on Batch insert code by default as it now passes regression.
1114 kes Add ./configure --enable-bat to enable building of Bat.
1115 No install yet though.
1117 kes Implement a new .sql command for bat.
1118 kes Implement code to turn off pruning in obtaining the next volume.
1119 Pruning is turned off for the status dir command, but turned on
1120 for SD requests and for the list nextvolume command.
1122 kes Correct Qmsg() that was not updated correctly when committing a
1123 previous change (probably the recent TLS patch).
1125 kes Write new subroutine is_volume_purged() that explicitly checks
1126 if the Volume is purged, and if so marks it as such. This should
1127 resolve problems reported about needing to mount twice to recycle
1129 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1130 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1131 amount of duplicated code.
1132 kes Do volume pruning only for the Media Type desired (reduces pruning time
1133 if multiple Media Types are in the same pool).
1134 kes Implement more detailed info in the Job report for the Bacula version
1136 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1138 ebl Add bbatch tool to bench database and insert mode.
1139 Fix sql quote stuff in batch mode
1140 Fix sql stuff for mysql
1142 kes Correct problems with am/pm scheduling. Fixes bug #808.
1143 kes Implement new prunning code that prunes up to 1000 jobs at
1144 the same time. The same technique can be applied to a number
1145 of other prune/purge subroutines.
1146 kes Add an insanity check when starting a new tape job to ensure
1147 that the tape position has not been changed. If so fail the
1149 kes Fix Win32 build for dlls to add the folllowing:
1150 src/lib/bsock.c -- new file with new entry points
1151 src/lib/dlist.c -- new entry points
1152 src/cats/sql_create.c -- new entry point
1153 src/cats/sql_cmds.c -- new DATA item exported
1155 ebl batch mode cleanup bscan-test is ok now.
1156 kes Implement SD code to check length of disk volume before appending.
1158 kes Correct return status on db_batch... routines.
1159 kes Add call to db_write_batch_file_records() to migration code.
1160 ebl Fix AfterJob timing
1161 kes Move the checking of the database in initializion of the Director
1162 to after we drop privileges. This avoids the need for both root
1163 and bacula access to the DB.
1164 kes Correct a misplaced variable definition in src/filed/backup.c
1165 kes Correct how the new batch insert db_create_attributes_record()
1166 uses the arguments. Caused a seg fault in bscan.
1167 kes Implement lock() and unlock() methods in DEVICE class.
1168 Implement block() and set_block(xx) methods in DEVICE class.
1169 kes Modify bnet_connect() so that it uses time() to check for the
1170 wait time expiring (on some OSes, some system calls may not
1171 return immediately).
1172 kes Modify Verify to obtain the previous JobId when it is actually
1173 running rather than at schedule time (as it was in 1.38.x).
1174 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1176 kes When checking pid in pid file, continue running if the pid is
1177 the same as ours. This occurs on IRIX after a system crash.
1180 kes Extend new GUI API.
1181 kes Make the ua structure a class, and implement send_msg(),
1182 error_msg(), warning_msg(), and info_msg().
1184 kes Apply fix from for building wx-console on the Mac from
1186 kes Implement new select mechanism for GUI programs.
1187 kes Reorganize initialization of stackedWidgets in bat.
1189 kes Add updated nagios plugin supplied by Christian Masopust.
1191 kes More bat implementation.
1192 kes File migrate bug with Pool Occupancy using mediaid instead
1193 of jobids. Fixes bug #795.
1194 kes Fix orphaned buffers in filed backup and verify due to
1195 crypto buffers not freed during errors. Fixes bug #789.
1196 kes Extend new GUI api code to tree commands.
1197 kes Ensure that tree and dot commands check console ACLs.
1198 kes Permit marking directory with trailing slash.
1199 kes Allow 20 console connections (instead of only 10).
1201 kes Add smartctl call to bacula-sd.conf as an example of getting
1204 kes Modify jobq.c to let simultaneous restore jobs run. This may
1205 cause them to fail if they cannot get a drive.
1206 kes Add Client Connect Wait to Storage daemon to permit users to
1207 modify the time the SD waits for a FD connection.
1209 kes Correct virtual changer check which was backwards. This caused
1210 volumes to be unloaded into slots already occupied.
1212 kes Apply Command ACL filter to JobId list in restore command.
1213 kes Correct typeo in var.c patch.
1215 kes Don't let Bacula prune File or Job records for the current Job.
1216 kes Fix variable substitution pad + inc bug reported (with patch)
1219 kes Correct SQLite log table index as reported by Luca Berra.
1221 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1223 kes Begin implementing new comm signals for API.
1224 kes Fix a few places in lib/message.c where the open fd may
1226 kes Continue implementing lib/bsock.c (real class). Make jcr,
1227 who, host, and port private. There are new methods to access
1228 them for non-class use. This required touching a number of files.
1230 kes Add LANG=C to autoconf/randpass so it works with languages other
1231 than English. Fixes bug #788.
1233 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1235 You will not be able to generate Include/Exclude list any more.
1236 It will be fixed soon.
1237 If you want to use this, you can apply
1238 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1240 kes Restore of sockets created false error messages because Bacula
1241 no longer restores sockets, but the code was still trying to
1242 set the attributes on a non-existent file. Reported by a user.
1243 ebl finish RecyclePool feature
1244 Media will takes Pool.RecyclePool
1245 when moving from Scratch to a Pool or when user will do
1246 update volume=xxx frompool
1247 To use it, add RecyclePool = aPool to your Pool resource
1250 RecyclePool = Scratch
1254 kes Expand new BSOCK class adding signal() and new BNET signals.
1255 kes Begin enhancing the dot commands adding a new API function
1256 that returns more information and will make it easier
1257 to interface to the Director from a program.
1259 kes Make DEVICE fd private. Its new name is m_fd, and can be
1260 obtained with dev->fd() outside the class. This is the
1261 first of many DEVICE members to be made private.
1262 kes Implement Michael Renner's idea on having a virtual disk
1263 changer. I made some minor modifications (e.g. I did not
1264 implement the Virtual Changer directive, but simply set
1265 the Changer Command to an empty string.
1267 kes Implement a BSOCK send() method that writes the whole record
1268 in a single write() request rather than in two.
1269 ebl add update volume=xxx recyclepool=yyyy
1270 volume takes recyclepool from pool when using update volume=xxx from pool
1272 kes Fix encryption deblocking bug, which caused some restored files
1273 to be truncated. This fixes bug #763.
1274 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1275 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1277 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1278 ebl Use btime_t instead of uint64_t in media patch.
1280 kes Optimize the use of the database a bit in the Status dir command.
1281 Only open it when needed, ensure that if any previous database
1282 was opened, it is closed.
1284 kes Correct VolCatBytes bug from media patch.
1285 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1286 in the case of orphaned records.
1287 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1288 and File records in 300K chunks to be more efficient. This
1289 idea came from Juan Luis Frances (if I remember right).
1290 kes Apply Eric's scratch patch that moves a purged Volume to
1291 the RecyclePool. Question: how is RecyclePool set? what
1292 happens to the ScratchPool?
1293 kes Apply Eric's media patch that collects read/write media
1294 times as well as byte counts. This patch requires a
1295 simultaneous upgrade of the DIR and SD. Note, there
1296 should be some way to turn off timing. I'm not sure
1297 times are in Bacula units.
1298 kes Apply Eric's batch-insert patch.
1300 kes Update projects list.
1302 kes Implement Include/Exclude file lists in FD as dlists using
1303 the new dlistString class. This permits efficiently having
1304 large include/exclude lists and completes project Item 25.
1305 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1306 console is authorized to cancel the job. This fixes bug
1308 kes Modify SD so that the VolCatJobs medium record is updated
1309 at the beginning of a Job rather than the end. This
1310 fixes bug #775 where exceeding MaxVolJobs caused jobs
1312 kes Added a mutex around getting and setting Volume information
1313 so that multiple simultaneous jobs will single thread.
1315 Switch to using Subversion
1316 kes Remove src/pygtk-console/ from configure
1318 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1319 plus the entrypoints.
1320 kes Apply patch supplied that corrects debug print
1321 in canceling jobs for max run time. Supplied as
1322 part of bug #621, which was previously fixed.
1324 kes Test on job_canceled() and sd_msg_thread_done inside
1325 loop starting the message thread to avoid a race condition.
1327 kes Remove rl_catch_signal from console.c as it conflicted
1328 with the header definition. Fixes bug #765.
1329 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1331 kes Clarify some stored/acquire messages to indicate if the
1332 problem is with read or append.
1334 kes Fix memory leak with storage ids in cats/sql_get.c
1335 kes Terminate watchdog earlier to avoid reference to released
1336 memory -- reported by Jason Austin.
1337 kes Move closing the database from jobq.c to the director daemon
1338 termination routine. This fixes memory leaks for shadow jobs
1339 (i.e. migration jobs).
1340 kes Free up the unique jobid chain items in migrate.c. This fixes
1341 a memory leak problem.
1342 kes Convert some ugly looking for statements to use foreach_alist
1343 in findlib/find.c. This will facilitate converting the structures
1344 to use dlist (for large include/exclude lists).
1345 kes Fix a bug in the btree.c and btree.h routines, then rename them
1346 rblist and add them to be built in src/lib. Include some new
1347 methods written by Rudolf Cejka that make the code more readable
1348 (hides some of the ugly casting).
1349 kes Add set_next() and set_prev() methods which make the code much more
1350 readable. Also add a new dlistString class that facilitates storing
1351 strings in dlists. To be used in the large include/exclude lists.
1352 kes Make some trivial modifications to lib/tree.h that use rblist
1353 rather than dlist for storing the tree links. This was suggested
1354 by Rudolf Cejka. The result of this is that the restore tree now
1355 uses red-black binary trees rather than simple linked lists. This
1356 should give rather dramatic speed improvements for directories
1357 contining large numbers of directories/files (more than 10000).
1359 kes Fix maxruntime bug #621.
1361 ebl Implement the include JobID in spool file name project.
1362 kes Reorder projects file in order determined by Jan 2007 vote.
1363 kes Implement item #12 on project list -- quick release of FD by
1365 kes Fix open of SQLite3 db where user does not have write permission
1366 so that DIR does not crash. Fixes bug #761.
1368 kes Add back missing @ in Win32 Makefile.
1369 kes Change 'Device not configured to autolabel' from INFO
1371 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1372 which should restart an indefinite # of times.
1373 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1374 other DIR specifications.
1376 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1377 Fix path quoting in SQLite scripts.
1378 Fix problems with SHGetFolderPath.
1380 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1382 kes Fix Job restart on error bug that promotes an Inc to a Full
1383 backup. This should fix bug #755.
1384 kes Add qt-console and first cut of code.
1388 kes Fix Bacula->Documentation link on Win32 to point to index.html
1389 instead of bacula.html. Fixed bug #750.
1390 kes Return JobId in db_get_job_record() when JobId==0. This should
1392 kes Do not release source pointers when restarting a failed job.
1394 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1395 This *should* fix bug #747.
1396 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1399 kes Modify USTORE constructor to set an empty store_source string,
1400 and don't copy the store_source string in a cancel. Hopefully
1401 this will fix Arno's seg fault, bug #744.
1402 kes Add back code to disable conio in configure. Fixes bug #743.
1403 kes Correct the Options scanner in the FD to correctly handle
1404 SHA1 option, which was eating the next option. Reported by
1406 kes Add code to indicate when the SD is spooling, spool wait, and
1407 despooling as requested by Alan Brown.
1409 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob