1 Technical notes on version 2.3
5 kes Add code to handle tray monitor separated from Win32 FD.
6 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
8 kes Add missed return in fixing verify bug -- trunk only.
9 ebl Fix a command parser issue causing a director segfault.
10 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
12 kes Increase the max block size to 4MB fixes bug #957.
13 kes ERABT if user sets min block size > max block size. Fixes bug #956.
14 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
15 is not properly mounted (recognized) during a poll.
16 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
17 Job that has differences reports Verify OK.
18 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
20 ebl Add an option to operate on all pools with update vol parameters.
21 This complete the project 20. Patch from Nigel Stepp.
22 ebl Add history support to bconsole when using readline.
23 Using Ctrl-D to exit doesn't update .bconsole_history
24 kes Modify new volume algorithm to use max MediaId for generating next
25 volume number rather than the count of Volumes. This should essentially
26 eliminate the failure rate if some volumes were deleted. Bug #921.
27 kes Begin implemention of Optimize Job Scheduling.
28 kes Implement restore callback that Dirk and I agreed on for bat
29 restore. This fixes bug #928. Restore of backup of zero files fails.
30 kes Fix SQL Catalog logging which broke with new db_escape_string
33 kes Fix bacula_cats.def for new db_escape_string().
34 kes Increase size of name string when FD making connection to SD.
35 May fix bug #953. FD->SD connection failure.
37 kes Add code to help Dan debug 2drive-incremental-2disk test.
38 kes Add code to try to fix bug #908.
39 kes Add waits to multiple exit detection code to try to force pid
40 file to always be deleted.
41 kes Restore good dev.tar.gz to rescue set appropriate binary property.
43 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
44 trying to switch drives by checking for blocking before unblocking.
46 kes Cancel storage daemon in all cases where FD reports error. This
47 should fix virtually all cases of bug #920.
48 kes Fix db_escape_string() for MySQL which did not compile.
50 kes Fix error message that was clobbered when Dir tells SD it does not
51 have write permission on Volume. This should fix a minor point
52 in bug #942, but not the main problem.
53 kes Add code to cancel job in SD if FD connection fails. This should
55 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
56 dvl Pass jcr and db into db_escape_string() to enable better escaping
58 kes Fix migration code to get correct Volume name with multiple volumes
59 by skipping |. Fixes bug #936.
60 kes Implement patch supplied by Landon to fix bug #944 where using
61 TLS with bconsole uses 99+% of the CPU.
62 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
64 kes Move patches into patches directory.
66 ebl Fix bug #946 about "bacula-dir -t" which doesn't works
69 ebl Using "m" in bconsole will show messages like before,
71 kes Fix bug #935, and probably also bug #903 where files were not
72 restored. MediaId was not properly set in JobMedia record after
75 kes Suppress chown and chmod error messages if the FD is not running
78 kes Apply Martin Simmons' patch that should turn off the new API usage
79 when batch insert is turned off allowing building on older
81 kes Add ./configure search in qwt-qt4 for qwt package
83 kes Bacula is now free of 3rd party GPL copyrighted code!
85 kes Add guid_to_name.c/h which replace idcache.
86 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
88 ebl Detect if new PosgreSQL batch insert API is present.
89 kes Correct incorrect mempool call causing Director crash. Occurs on
90 systems without va_copy().
91 sb Update spec files for 2.2.1 release
93 kes Fix memory pool call in ua_output.c. bug #934.
94 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
95 Add test program to fnmatch.c
97 kes Integrate patch to README.vc8 from
98 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
99 edit it to get it into Unix patch format.
100 kes Implement mkpath.c to replace old FSF makepath.c
102 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
104 Release Version 2.2.1
106 kes Update POTFILES.in
107 kes Cleanup a few underquoted AC_DEFUNs in configure
108 kes Apply patch from Martin Simmons that adds a test for va_copy to
111 kes Fix bug #921 by increasing the number of tries to create a new volume
113 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
114 can be called multiple times. Implement a version for machines
115 without va_copy() that gets a big buffer.
117 kes Integrate more portable zone offset code into bsmtp.c
118 Submitted by Attila Fülöp.
120 kes Fix bad SD->FD return status reported by
121 (James Harper) <james.harper@bendigoit.com.au>
122 ebl Fix a bug in read_close_session which return random status
123 thanks to James Harper
125 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
126 and directory names during restore of single file/directories.
127 kes Add sanity checks to .sql command when string is empty. Hopefully
128 that will resolve Dirks Director crash.
130 kes Apply patch submitted by Martin Simmons that corrects a seg fault
131 in the bsmtp chat subroutine when debug is >= 10.
133 kes Fix Director crash when running bat SQL queries.
134 kes Add David's notes on Item 8: Copy pools.
136 kes Rework projects file to be current and ready for a vote.
137 kes Enhance lex scanner error message.
139 kes Tweak LICENSE file to mention BSD code.
140 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
141 if specified on the ./configure.
142 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
143 This class is intended to allow us to open a second bsock to the
144 Director while in the restore subdialog.
146 kes Fix configure to create bat Makefile before creating dependencies.
147 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
148 kes Add a tooltip to the tray monitor.
149 dvl Set the Director's PID file before dropping privs. This fixes
152 kes Update AUTHORs file
153 kes Increase the default max concurrent jobs to 20 in FD and SD to
154 correspond with the default .conf files.
155 kes Rewrite the Win32 service routines. This eliminates the 3 copies
156 some different, of the same file created by RN when porting the
158 kes Rearrange some of the Win32 directories and the placement of the files
160 kes Set DEVELOPER flag in version.h
162 ========================================================================
163 Release Version 2.2.0
165 kes Apply a second doc patch from Marc.
166 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
167 improves the tips section that discusses how to setup multiple
170 kes Update bat README file.
171 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
172 corrects a typo in the Recycle status check in db_find_next_volume().
173 This will probably fix a number of annoying problems with multiple
175 kes Modify most of dird/msgchan.c to use bsock class calls rather than
176 bnet calls -- no functionality change.
178 kes Modify the Verify output to specify if files are missing on
179 the Volume(s) or disk. Fixes confusion in bug #916.
180 kes When more than one Volume is read in a migration job, the last
181 Volume bytes reported are from the last read volume rather than
182 the last written volume. Fixed. This fixes bug #910.
183 kes Fix display of Recycle flag after update volume=foo recycle=yes.
184 It previously printed New Recyle flag is: no. This fixes bug
187 kes Correct seg fault when switching tape drives during restore.
188 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
189 be used until after 2.2.0 release.
191 kes Remove fnmatch() in SD that permitted wild card specifications.
194 kes Fix %g in filename returned by SQL for browse tree reported by
196 kes Fix configure so that it puts config.out in the cwd rather than
198 kes Attempt to fix the locking problem reported by Eric in bug #906.
199 kes Make berrno class to leave errno unchanged after constructor call.
200 kes Make bnet_server use the heap rather than the stack to allocate
201 its socket fd pointers to avoid a crash at termination. Problem
202 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
204 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
205 and putting it in depkgs-qt along with Qt4.3.
207 kes Rework code in acquire.c that switches drives for reading when
208 the Media Type does not match. This should fix bug #906
210 ebl Fix a director segfault during job setup #907
211 kes Correct seg fault in postgresql when first operation returns no
212 rows. Fixes Dirks File browser problem seg fault with bat.
214 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
215 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
218 kes Implement PopUp YES/NO dialog for bat.
220 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
222 kes Correct RunScript to terminate job in FD on failure.
223 kes Change abort_on_error and AbortJobOnError to fail_on_error
224 and FailJobOnError in RunScripts.
225 kes Minor tweaks of code formating in RunScripts, principally to
226 avoid depassing 80 columns.
228 kes Eliminate one #ifdef Win32 in bsmtp
229 kes Implement grow tool to grow a file for testing very large databases.
230 kes Add big-vol-test to test Bacula seeking with > 5GB.
233 kes Modify find_next_volume() to return all values in Media record.
234 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
238 kes Update Release notes
240 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
241 Warning, in previous beta version, all media get from scratch keep their
244 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
245 This should fix bug #842. Made a note to look at removing the temp
246 files at the end of the install.
247 kes Add ability to mount and unmount a file device providing it is
248 marked as being removable and has the appropriate mount and unmount
249 commands defined in the Device resource. This fixes bug #830.
250 kes When applying a storage override, release all previous storage
251 definitions rather than just prepending the new storage.
252 This should prevent a good deal of confusion.
254 kes Implement ./configure search for qwt libraries.
256 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
257 Win32 FD. This should fix bug #893.
258 kes Remove an unnecessary beep in Win32 init code.
259 kes Update copyright dates in Win32 executable about boxes.
260 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
261 code with a BSD getopt.c and getopt.h.
262 kes Remove sched.h from the Win32 compat directory -- not used.
263 kes Remove the Exit menu item from the Win32 tray monitor. If you really
264 need to shut it down, do it through the services panel or the command
266 kes Remove some inappropriate Bacula FSFE copyrights.
267 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
268 kes Fix regress config non-portable test as pointed out by
269 Florian Heigl <florian.heigl@gmail.com>
270 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
271 as pointed out by Florian Heigl <florian.heigl@gmail.com>
273 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
274 Reported by Frank Sweetser.
278 kes Fix client-only build.
279 kes Integrate client-only fixes for bsys (initgroups) and conio from
280 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
281 kes Make arguments to get_scratch_volume() in same order as other
283 kes Rework the prune_volumes() subroutine so that after purging and
284 no volume found in desired pool, it will check for a scratch
285 volume. This prevents recycling the whole scratch pool.
286 kes Add code to status storage to print boffset_t (largefile support).
288 kes Move qwt (Graphics libarary for Qt4) to depkgs.
289 kes You now need a --with-qwt=<dir> to be able to build bat.
290 kes Update src/win32/cats/bacula_cats.def to include the new
291 db_get_query_dbids() call on Win32.
293 kes Correct a problem when selecting a scratch volume and moving
294 it to another pool that lost some columns.
295 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
296 kes Enhance Autochanger error messages to include Volume and device name.
297 kes Rework prune_volumes() code to take account of InChanger flag,
298 and to handle recycling volumes going to the Scratch pool and
299 current pool because the RecyclePool directive.
300 kes Implement a better and more efficient db_get_query_dbids() to
301 handle creating and passing back a list of DBIds.
305 kes Start work on new more efficient DBId subroutine. First use
306 will be for recycling volume to Scratch inchanger.
307 kes Increase number of JobIds in pruning from 1000 to 10000.
308 This to be replaced by above routine.
309 kes Begin implementation of building Qt4 on Win32.
310 kes Correct typo in fix I added for bad TLS shutdown.
311 kes Pull 2.0.3 patches into patches directory.
312 kes Update Release notes. Include qt-console in line count.
313 kes Update Projects file.
315 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
316 bug in migration code where a job that spanned two volumes
319 kes Implement new BST_DESPOOLING blocked state. Change from locking
320 during despooling in SD to blocking. This means that other threads
321 can work with the device structure, in particular the reservations
322 system while despooling.
324 kes Fix return in reservation message queue that missed clearing
325 the jcr lock (implemented 26Jun07 below).
326 kes Rename a number of dev methods to make locking function names
328 kes Document locking in lock.c. Move lock structures to new file
331 kes Move reservations message lock to lock jcr only this
333 kes Move main SD locking code into lock.c (new file).
334 kes Update Win32 build to include lock.c
338 kes Dirk committed the qwt library code for drawing graphs in bat.
339 kes Tweak install of qwt so that it is integrated with ./configure.
341 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
342 out by Eric (my typo).
343 ebl Fix configure.in to get batch mode enable
344 kes Return correct string from authenticate.cpp in bat when connecting
346 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
347 spurious line drops when using TLS.
348 kes Do not file reparse points when restoring a file that already
351 kes Implement Windows reparse points -- similar to directories, but
352 we do not descend into it. This is a first cut. They seem to
353 be backed up, but restore is not yet tested.
354 kes Remove restore_blocking in tls code when shutting a socket to leave
355 it in blocking mode. Hopefully this will fix the encryption bug
356 reported by Frank Sweetser.
357 kes When opening a file for backup, tell the OS that we are going to
358 read it sequentially -- optimization.
359 kes Change variable names in authenticate_director() to not conflict
360 with member names in bat. Caused great confusion with compiler,
363 kes Queue openssl error messages in case of comm problem.
364 kes Do shutdown() call if socket terminated.
365 kes Remove some duplicated code in tls.c
366 kes Move more of the bsock member variables into private and access
368 kes Add Frank Sweetser's tls-test to the regression suite.
370 kes Add Swedish sv.po file
372 kes Don't print clock skew message in FD if less than 3 seconds diff.
373 kes Add a bit of VSS info to status client.
374 kes Implement a first cut of Vista VSS, using Win2003 code.
378 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
379 loaded tape but uses first drive).
380 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
381 This was indeed a Win32 issue.
383 kes Simplify search of autochanger for in-use Volume.
384 kes Fix exit condition of check for in-use volume. kes Remove
385 inappropriate my_postgresql_free_result() in db_close()
387 kes Fix bad return in FD when encryption signature not found.
388 Probably caused a crash.
389 kes Inhibit missing encryption signature error messages for
390 file types where no signature computed.
391 kes Correct inverted check on autochanger in reservation system.
392 kes Tweak debug code in autochanger reservation.
394 kes Add some additional locking in the cats directory in subroutines
395 that modify packet variables called from batch insert.
396 kes Rework how dcrs are allocated. new_dcr() can now be called
397 with an existing pointer, and it will simply clean it up.
398 This allows the reservation system to test various different
399 devices, and will permit easy device changes.
400 kes A bunch of changes all over to handle new new_dcr() calling
402 kes Work more on the Volume management in the SD. Remember Volumes
403 for tape drives and for autochangers (even virtual disk changers).
404 kes When looking at the Volume list to reserve a drive, handle
405 autochanger names correctly by interating through the changer
406 devices. Also call the Director to see if a Volume is suitable
408 kes Fix some bugs in bscan. Make sure all media records are written.
409 Make sure that valid JobMedia records are written for disk files.
410 Previously they were completely wrong.
411 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
412 that the URLs don't change and so that the developers will all
413 work off the same copy. Rebuild from scrach.
414 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
418 kes Fix seg fault in FD from incorrect digest size.
419 kes Fix argument to non-OpenSSL crypto.c subroutine.
423 kes Remove a few malloc()s from the encryption code.
424 kes Use the class calls to bsock in filed/backup.c and restore.c in
425 place of the old bnet_xxx code.
426 kes Implement code that does an on the fly calculation of the
427 signing digest during restore of encrypted files. It makes
428 a best guess at the algorithm, and if it is not correct, will
429 then revert to the old code which reads the file after it is
431 kes Implement at least one missing crypto stream in stream_to_ascii()
432 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
433 #877 where a reload with bad syntax causes Dir to exit.
435 Cut: 2.1.14 beta (not released)
437 kes Do not free a volume on a tape drive until another volume is
438 mounted and read, or the autochanger unloads the volume.
439 This should help the SD re-use volumes that are already mounted,
440 and should fix bug #886.
441 kes Apply patch from user brettedgar that allows gnome2-console include
442 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
443 kes Apply patch from Lucien Weller that fixes day of week calculation
444 because of DST flag problem. Fixes bug #887.
446 kes Move find_next_appendable_volume() to after acquiring a valid device
447 in reserve.c. This fixes bug #864 -- confirmed by reporter.
449 kes Unable to reproduce bug 872. However added additional testing for
451 kes Bug #874 resolved by documenting SQLite limitations.
452 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
453 kes Bug #881 resolved by removing typo in mtx-changer script.
454 kes Made Frank Sweetser's wiki the official Bacula wiki with his
455 approval. Added a link to the wiki on the web page, and implemented
456 a backup from http://paramount.ind.wpi.edu
458 kes Fix update allfrompool to pass pool name.
460 kes Convert to pure GPL v2 license.
461 kes Fix sscanf problems reported by Peter Buschman that caused
462 a bus error on Solaris.
463 kes Rework (simplify) the select prompt in bat.
464 kes Move get_jobid_from_tid() into lib and create a
466 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
467 should definitely fix the problem of lost error messages in the
469 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
470 kes Eliminate tcpd.h from the project. Enclose the #include from the
471 library with extern C ...
472 kes Add print of signal name when a signal is trapped.
476 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
478 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
479 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
480 makes SQLit3 run 30 times faster, though a bit less safe.
481 kes Implement --with-batch-insert in configure and detection of thread
482 safe libraries. It is on by default, but turned off if no thread
483 safe library (e.g. SQLite 2) is available.
485 kes Fix Bacula PostgreSQL buffer overruns.
486 kes Do better checking for NULL results returned from PostgreSQL;
487 implement retry for failed queries; clear results buffer after
488 failed query. Hopefully this will correct the PostgreSQL failures.
490 kes Implement algorithm to handle only one appendable volume with
491 Prefer Mounted Volumes = no.
492 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
493 returned from a query.
494 kes Make volume lock recursive.
495 kes Implement an additional volume reservation algorithm that
496 starts by considering all reserved volumes then uses the
497 old brute force algorithm of searching the resources to
498 find a suitable device.
499 kes Add new reservations debug code and refine the old code.
500 kes Update the win32/dll/bacula.defs file.
502 kes Tweak reservations algorithm to permit a few more cases, i.e.
503 volume reserved, but on different drive, ...
504 kes Enhance SD status to include Pool and Media Type for drive in a
505 more readable format (a bit longer).
506 kes Fix PostgreSQL double free.
508 kes Minor refactoring of restore decryption code.
509 kes Add code to smartall.c to detect double free of a buffer.
511 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
512 so that bsmtp will create a correct email address (mailbox only).
513 kes Modify 'memory' command so that the buffers are listed as 'In use'
514 to avoid confusion with Orphaned buffers.
515 kes I reworked the OpenSSL include/lib flags to be handled in
516 the standard Bacula way, which should fix bug #863 concerning
517 non-standard OpenSSL libraries.
519 kes Implement Help Browser window for bat.
520 kes Fix reload bug that reset StorageId to zero.
522 kes Fix TLS #ifdefing when TLS turned off.
523 kes Ensure that when labelling a tape with Slot=0 that InChanger
525 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
527 kes Add StartTime to final uar_sel_jobid_temp query so that we can
528 add DISTINCT (required by PostgreSQL).
529 kes Implement BSOCK authenticate_director() method. Eventually will
530 authenicate all daemons.
531 kes Move several more functions into the BSOCK class.
533 kes Add code to tell the OS that we no longer need a cached
534 file that we were reading. In findlib/bfile.c. Also,
535 only cache files that we are reading. Thanks to
536 Tobias Oetiker <tobi@oetiker.ch> for the idea.
537 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
538 kes Implement script to automatically generate cats and dll .def
540 kes Update README.mingw32 to include new .def file generation.
541 kes Correct typo in UTF-8 error message as reported by:
542 jhernandez <julianhernandez@gmail.com>
543 kes Add additional sm_check() code on debug level 1.
544 kes Set default debug level to 1.
545 kes Trap SIGABRT in attempt to get traceback.
547 kes Reduce bat connect timeout from 30 to 15 seconds.
548 kes More restructuring and implementing BSOCK class in place of
550 kes Remove a few unnecessary malloc() tests in crypto code.
551 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
552 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
553 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
555 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
557 kes Fix Verify InitCatalog. The attributes were not pointing to the
558 correct saved location.
559 kes Implement message callback so that GUI is sure to get all
560 daemon messages. Currently displayed in a dialog in bat.
561 kes Ignore SIGUSR2 (Bacula timer) in bat.
562 kes Apply regress patch from bug #859 to allow regress to work
563 with Solaris compiler.
565 kes Begin adding TLS support to bat.
566 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
567 clean up lex.c and make it more readable.
569 kes Move more bnet functions into the BSOCK class.
570 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
571 kes Complete change of berrno strerror() method to bstrerror()
575 kes Cleanup incorrect email addresses in bsmtp.
576 kes Make bat display initial messages rather than discard them.
578 kes First cut of adding .mod to the run command.
579 kes Implement auto display of messages in bat.
580 kes Enhanced preferences to allow all Bacula output to be
583 kes Try to make bsmtp date routines more generic.
584 kes Fixed bug #856 autochanger documentation.
585 kes Rework bsmtp date editing for Win32. This fixes bug #854.
586 kes Add new cats entry point so Win32 builds.
588 kes Attempt to fix bsmtp date editing on OSes without %z editing.
590 kes Do better checking for the MySQL 64 bit libraries looking for both
591 .a and .so libraries.
592 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
593 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
594 kes Require the thread safe version of MySQL during configure. Thanks
595 to Andre Noll for pointing this out.
596 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
597 continuing in migration code.
598 kes Apply implementation of tray-monitor font derived from gnome-console
599 submitted by Andreas Piesk <a.piesk@gmx.net>
601 kes Eliminate important memory loss in SQLite
602 kes Fixed the batch insert MySQL thread specific data that was not
603 being freed. See cats/mysql.c:db_thread_cleanup().
604 kes Fix restore before command.
605 kes Convert old hdr.name to name() in a few places.
606 kes Implement update jobid command.
607 kes Return all time_t dates in db_get_job_record()
608 kes Stop watchdog in SD earlier.
609 kes Put Pool just after Storage in please mount message.
610 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
613 kes Update the po files.
614 kes Fix Verify InitCatalog by making it cache attributes.
616 kes Change name bacula-bat to bat for man 1 page to correspond to
618 kes Check for client and store NULL pointers in status command. This
620 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
621 kes Fix sign extended editing of %p.
622 kes Clean out a little old #ifdefing in cats/mysql.c
624 kes If time diff between DIR and FD is more than 600 seconds convert
625 INFO message to WARNING.
626 kes Implement heap size display in status for all daemons.
627 kes Attempt to fix MySQL db open memory loss (not successfull).
628 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
629 kes Eliminate memory loss in MySQL (possibly other SQLs) during
630 Query. This looks like a MySQL but but by doing extra releases,
631 the memory goes away. This should fix bug #847.
633 kes When backup fails, cancel SD before waiting for sd termination.
634 kes If SD is waiting for FD to connect during cancel, wake up the
636 kes Fix fsf code so that errno is correctly reported.
637 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
639 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
640 so that Bacula doesn't later stumble into a seg fault.
641 kes Use the term Restore Client in the restore Job report.
642 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
643 the original job's FileSetId.
644 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
645 spooling in migration jobs. Not yet tested.
646 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
647 reading conf file from a pipe. However, do it with open_bpipe()
648 rather than popen. Not yet tested.
650 kes Fix an ugly bug where the VolCatBytes were getting updated
652 kes Implement bconsole memory command that prints current memory
653 usage, plus smartalloc dump.
654 kes Clarify some error messages in backup, admin, and migrate.
655 kes Shrink label dialog to smaller size.
656 kes Invert Cancel OK buttons on restore to be OK Cancel.
657 kes More strerror() to bstrerror() conversions.
659 kes Start implementing bstrerror() in place of strerror().
660 kes Stripping path -- seems to work.
662 kes Prevent door and port files from being restored (mostly
664 kes Free an unreleased buffer in compat code.
665 kes Change console Job name from *Console* to -Console- to eliminate
666 Win32 filename problems. Put Win32 path separator when creating
667 Console file. This fixes bug #846.
668 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
670 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
672 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
673 to force Win32 error message.
675 kes First cut strip path. The data should be passed to the FD,
676 but nothing is done with it yet.
677 kes Enhance the digest and signature routines in the crypto
678 library to accept a JCR and to use it to print error messages
679 so that they will go in the Job report rather than the daemon's
681 kes Simplify some of the verify signature code.
682 kes Simplify a few of the alternative returns in the signature
685 ebl Use only POSIX regex instead of GNU regex in breg.c for
686 File relocation. It fix broken freebsd compilation.
687 kes Convert all other Dir files to use new ua class message
689 kes Tentative fix for missing digest signature in bug 807.
690 kes Correct handle problem in new win32_ftruncate routine.
691 kes Convert ua_purge.c and ua_update.c to use new ua class
692 message routines for bat.
694 kes Correct incorrect installation of LICENSE in Win32 installer.
695 kes Display LICENSE at the beginning of the Win32 install.
696 kes Attempt to correct the need for the png files to be installed
698 kes Reapply my bat.conf install script in qt-console. I think I
699 editted bat.pro instead of bat.pro.in and it was lost.
700 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
701 the /var/lock/subsys for subsysdir. Also corrects typos in the
704 kes First cut update job.
705 kes Correct configure to include qmake of src/qt-console directory.
707 kes Make restore job yes/mod/no print in one command so GUI works.
708 kes First cut implementing backup and restore client.
709 kes Correct editing in Verify output that caused a seg fault.
711 kes Insure that bat.conf is not overwritten during installation.
712 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
713 while I was implementing migration in March 2006 !
715 ebl Cleanup file relocation, using char *RegexWhere instead of
716 char *where + bool where_use_regexp
717 kes Update some manpages and add bat manpage.
718 kes Make a first cut at converting bacula.spec.in for bwx-console
720 kes Apply patch from John Goerzen to add hostname as fourth argument
721 to make_catalog_backup script.
722 kes Fix typos I introduced into bsmtp.c
723 kes Make pm_strxxx() routines handle input of NULL pointer. This
724 is to protect from NULL pointers returned from SQL databases.
725 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
726 kes Add more debug to FIFO code -- fix fifo regression test.
728 kes Implement posix_fadvise in FD, and for reading spool files in SD.
729 kes Add thread timer to bnet_connect() to break from OS if wait time
732 kes Update Win32 build to include new files, new symbols, and
734 kes Implement socket level heartbeat (tcp_keepidle)
735 ebl Commit File relocation patch
736 kes Make bat have 'make install' target.
737 kes Warn during install if old gnome-console binary found.
738 kes Warn during install if old wx-console binary found.
739 kes Add -8 option to bsmtp command line to add content type utf-8.
740 Fixes bug #809. (Character coding problem in bsmtp).
741 kes If < is found in target (from, to, cc) then do not enclose the
742 target in < > in bsmtp. Fixes bug #772 (malformed address).
743 kes When printing certain items in dbcheck, stop after 300000.
744 Fixes bug #822. (dbcheck loops).
745 kes Incorrect status in Dir after waiting for mount with poll set.
748 kes Extend idea of Prefer Mounted Volumes to mean a volume about
750 kes Print waiting to reserve a device every 5 mins.
752 kes Don't call close_part in label.c if tape and relabel.
753 kes Don't free volume if busy in close() -- should help with
755 ebl Fix #824 RunScript bug (After script could be execute twice)
756 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
757 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
758 Add a regression script to test RunScript
760 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
763 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
764 deprecated. No additional bugs will be fixed, and they will be dropped
765 in a future release (probably 2.4.0).
766 kes Change name of wx-console to bwx-console to make it more Bacula
768 kes Change the name of gnome-console to bgnome-console to make it
771 kes Some time in March, a Feature Request with patch from Jorj Bauer
772 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
774 The ability for the director to validate a Client (FD) CN against
775 an arbitrary set of patterns rather than the hostname, with
776 A new 'TLS Allowed CN' set of directives which are implemented
777 in the Client resource. Then pattern matching is used in place
778 of hostname matching against the Certificate's CN. As an example, we
779 have certificates which (a) use a local CA, and (b) have a CN of the
781 kes Add new/changed entry points to Win32 build
782 kes Create unaccepted-projects for projects that are not accepted.
783 kes Simplify locking in the reservations system.
784 kes Add more debug code in reservations.
785 kes Make sure error condition on reserving a volume is handled correctly.
786 kes Correct handling of volume_in_use.
787 kes Correct handling of initializing a device.
788 kes Move handling of broadcasting releasing a device into release_device().
789 kes Correct attaching dcr to dev so that it is only done if device
790 is properly initiated.
792 kes Locking debug level tweaks in SD.
793 kes Tweak new Volume code.
795 kes Add exec external-command [wait-seconds] to bconsole. This
796 executes the external-command. Note! normally external-command
797 should be enclosed in double quotes.
798 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
799 it should normally be off in a production system.
801 kes Implement die command for SD so that we can force it to dump.
802 kes Implement SD lock debug code.
803 kes Implement new algorithm for keeping Volume list in SD. It
804 is now owned by the device.
806 kes Implement new code for freeing in use volumes that should
807 resolve if not all, some of the problems of multiple drive
808 tape conflicts described in bug 801.
810 kes Fix gui/bacula-web/images files in svn.
811 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
813 ebl Fix a bug in batch mode (in string escape)
814 kes Correct migration prune SQL typo that crept in in a
817 kes Move bnet_despool() into class in bsock.c
818 kes Modify job report to include director name and Build OS.
819 kes Move drop root privilege and check_catalog() before fork.
820 kes Add update database scripts (version 9 to 10) to updatedb directory.
822 ebl Check size and age of each file after its backup to see if
823 it has changed during backup, if 'checkfilechanges' is set.
824 The FD will do an extra check (stat(2)) after
825 each file backup. mtime, ctime and size are compared with
826 'before backup' information. If time or size mismatch, an
827 error message will be generated. You must upgrade FD to use it.
829 kes Make database name and user configurable
830 --with-db-name=xxx --with-db-user=xxx
831 kes Add back database type to message.c for debugging.
833 kes Implement dir_sql() which issues an SQL query.
834 kes Modify bat medialist to use dir_sql() and do some minor C++
835 formatting as well as eliminating a number of pointers, simplifing
838 kes Fix some of the mtx-changer grep commands for tape label readers.
839 kes Convert a number of bsendmsg into the appropriate send/warning/error
841 kes Suppress the using database message in the .sql command.
842 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
844 kes Add context menu for floating a window.
845 kes Some minor cleanup and name changes in qt-console
846 kes Add doing mt setblk 0 in Win32 mtx-changer.
847 kes Apply Martin's bug fix to move definition of ENODATA for
849 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
852 kes More pruning cleanup.
853 kes Turn on wait_for_drive by default in mtx-changer.
854 kes Turn on Batch insert code by default as it now passes regression.
855 kes Add ./configure --enable-bat to enable building of Bat.
856 No install yet though.
858 kes Implement a new .sql command for bat.
859 kes Implement code to turn off pruning in obtaining the next volume.
860 Pruning is turned off for the status dir command, but turned on
861 for SD requests and for the list nextvolume command.
863 kes Correct Qmsg() that was not updated correctly when committing a
864 previous change (probably the recent TLS patch).
866 kes Write new subroutine is_volume_purged() that explicitly checks
867 if the Volume is purged, and if so marks it as such. This should
868 resolve problems reported about needing to mount twice to recycle
870 kes Rewrite pruning algorithm to do more work in the SQL engine, and
871 to pass a list of JobIds to be deleted to SQL. Also, minimize the
872 amount of duplicated code.
873 kes Do volume pruning only for the Media Type desired (reduces pruning time
874 if multiple Media Types are in the same pool).
875 kes Implement more detailed info in the Job report for the Bacula version
877 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
879 ebl Add bbatch tool to bench database and insert mode.
880 Fix sql quote stuff in batch mode
881 Fix sql stuff for mysql
883 kes Correct problems with am/pm scheduling. Fixes bug #808.
884 kes Implement new prunning code that prunes up to 1000 jobs at
885 the same time. The same technique can be applied to a number
886 of other prune/purge subroutines.
887 kes Add an insanity check when starting a new tape job to ensure
888 that the tape position has not been changed. If so fail the
890 kes Fix Win32 build for dlls to add the folllowing:
891 src/lib/bsock.c -- new file with new entry points
892 src/lib/dlist.c -- new entry points
893 src/cats/sql_create.c -- new entry point
894 src/cats/sql_cmds.c -- new DATA item exported
896 ebl batch mode cleanup bscan-test is ok now.
897 kes Implement SD code to check length of disk volume before appending.
899 kes Correct return status on db_batch... routines.
900 kes Add call to db_write_batch_file_records() to migration code.
901 ebl Fix AfterJob timing
902 kes Move the checking of the database in initializion of the Director
903 to after we drop privileges. This avoids the need for both root
904 and bacula access to the DB.
905 kes Correct a misplaced variable definition in src/filed/backup.c
906 kes Correct how the new batch insert db_create_attributes_record()
907 uses the arguments. Caused a seg fault in bscan.
908 kes Implement lock() and unlock() methods in DEVICE class.
909 Implement block() and set_block(xx) methods in DEVICE class.
910 kes Modify bnet_connect() so that it uses time() to check for the
911 wait time expiring (on some OSes, some system calls may not
913 kes Modify Verify to obtain the previous JobId when it is actually
914 running rather than at schedule time (as it was in 1.38.x).
915 kes Fix src/job.c to handle MaxWaitTime correctly. This should
917 kes When checking pid in pid file, continue running if the pid is
918 the same as ours. This occurs on IRIX after a system crash.
921 kes Extend new GUI API.
922 kes Make the ua structure a class, and implement send_msg(),
923 error_msg(), warning_msg(), and info_msg().
925 kes Apply fix from for building wx-console on the Mac from
927 kes Implement new select mechanism for GUI programs.
928 kes Reorganize initialization of stackedWidgets in bat.
930 kes Add updated nagios plugin supplied by Christian Masopust.
932 kes More bat implementation.
933 kes File migrate bug with Pool Occupancy using mediaid instead
934 of jobids. Fixes bug #795.
935 kes Fix orphaned buffers in filed backup and verify due to
936 crypto buffers not freed during errors. Fixes bug #789.
937 kes Extend new GUI api code to tree commands.
938 kes Ensure that tree and dot commands check console ACLs.
939 kes Permit marking directory with trailing slash.
940 kes Allow 20 console connections (instead of only 10).
942 kes Add smartctl call to bacula-sd.conf as an example of getting
945 kes Modify jobq.c to let simultaneous restore jobs run. This may
946 cause them to fail if they cannot get a drive.
947 kes Add Client Connect Wait to Storage daemon to permit users to
948 modify the time the SD waits for a FD connection.
950 kes Correct virtual changer check which was backwards. This caused
951 volumes to be unloaded into slots already occupied.
953 kes Apply Command ACL filter to JobId list in restore command.
954 kes Correct typeo in var.c patch.
956 kes Don't let Bacula prune File or Job records for the current Job.
957 kes Fix variable substitution pad + inc bug reported (with patch)
960 kes Correct SQLite log table index as reported by Luca Berra.
962 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
964 kes Begin implementing new comm signals for API.
965 kes Fix a few places in lib/message.c where the open fd may
967 kes Continue implementing lib/bsock.c (real class). Make jcr,
968 who, host, and port private. There are new methods to access
969 them for non-class use. This required touching a number of files.
971 kes Add LANG=C to autoconf/randpass so it works with languages other
972 than English. Fixes bug #788.
974 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
976 You will not be able to generate Include/Exclude list any more.
977 It will be fixed soon.
978 If you want to use this, you can apply
979 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
981 kes Restore of sockets created false error messages because Bacula
982 no longer restores sockets, but the code was still trying to
983 set the attributes on a non-existent file. Reported by a user.
984 ebl finish RecyclePool feature
985 Media will takes Pool.RecyclePool
986 when moving from Scratch to a Pool or when user will do
987 update volume=xxx frompool
988 To use it, add RecyclePool = aPool to your Pool resource
991 RecyclePool = Scratch
995 kes Expand new BSOCK class adding signal() and new BNET signals.
996 kes Begin enhancing the dot commands adding a new API function
997 that returns more information and will make it easier
998 to interface to the Director from a program.
1000 kes Make DEVICE fd private. Its new name is m_fd, and can be
1001 obtained with dev->fd() outside the class. This is the
1002 first of many DEVICE members to be made private.
1003 kes Implement Michael Renner's idea on having a virtual disk
1004 changer. I made some minor modifications (e.g. I did not
1005 implement the Virtual Changer directive, but simply set
1006 the Changer Command to an empty string.
1008 kes Implement a BSOCK send() method that writes the whole record
1009 in a single write() request rather than in two.
1010 ebl add update volume=xxx recyclepool=yyyy
1011 volume takes recyclepool from pool when using update volume=xxx from pool
1013 kes Fix encryption deblocking bug, which caused some restored files
1014 to be truncated. This fixes bug #763.
1015 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1016 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1018 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1019 ebl Use btime_t instead of uint64_t in media patch.
1021 kes Optimize the use of the database a bit in the Status dir command.
1022 Only open it when needed, ensure that if any previous database
1023 was opened, it is closed.
1025 kes Correct VolCatBytes bug from media patch.
1026 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1027 in the case of orphaned records.
1028 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1029 and File records in 300K chunks to be more efficient. This
1030 idea came from Juan Luis Frances (if I remember right).
1031 kes Apply Eric's scratch patch that moves a purged Volume to
1032 the RecyclePool. Question: how is RecyclePool set? what
1033 happens to the ScratchPool?
1034 kes Apply Eric's media patch that collects read/write media
1035 times as well as byte counts. This patch requires a
1036 simultaneous upgrade of the DIR and SD. Note, there
1037 should be some way to turn off timing. I'm not sure
1038 times are in Bacula units.
1039 kes Apply Eric's batch-insert patch.
1041 kes Update projects list.
1043 kes Implement Include/Exclude file lists in FD as dlists using
1044 the new dlistString class. This permits efficiently having
1045 large include/exclude lists and completes project Item 25.
1046 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1047 console is authorized to cancel the job. This fixes bug
1049 kes Modify SD so that the VolCatJobs medium record is updated
1050 at the beginning of a Job rather than the end. This
1051 fixes bug #775 where exceeding MaxVolJobs caused jobs
1053 kes Added a mutex around getting and setting Volume information
1054 so that multiple simultaneous jobs will single thread.
1056 Switch to using Subversion
1057 kes Remove src/pygtk-console/ from configure
1059 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1060 plus the entrypoints.
1061 kes Apply patch supplied that corrects debug print
1062 in canceling jobs for max run time. Supplied as
1063 part of bug #621, which was previously fixed.
1065 kes Test on job_canceled() and sd_msg_thread_done inside
1066 loop starting the message thread to avoid a race condition.
1068 kes Remove rl_catch_signal from console.c as it conflicted
1069 with the header definition. Fixes bug #765.
1070 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1072 kes Clarify some stored/acquire messages to indicate if the
1073 problem is with read or append.
1075 kes Fix memory leak with storage ids in cats/sql_get.c
1076 kes Terminate watchdog earlier to avoid reference to released
1077 memory -- reported by Jason Austin.
1078 kes Move closing the database from jobq.c to the director daemon
1079 termination routine. This fixes memory leaks for shadow jobs
1080 (i.e. migration jobs).
1081 kes Free up the unique jobid chain items in migrate.c. This fixes
1082 a memory leak problem.
1083 kes Convert some ugly looking for statements to use foreach_alist
1084 in findlib/find.c. This will facilitate converting the structures
1085 to use dlist (for large include/exclude lists).
1086 kes Fix a bug in the btree.c and btree.h routines, then rename them
1087 rblist and add them to be built in src/lib. Include some new
1088 methods written by Rudolf Cejka that make the code more readable
1089 (hides some of the ugly casting).
1090 kes Add set_next() and set_prev() methods which make the code much more
1091 readable. Also add a new dlistString class that facilitates storing
1092 strings in dlists. To be used in the large include/exclude lists.
1093 kes Make some trivial modifications to lib/tree.h that use rblist
1094 rather than dlist for storing the tree links. This was suggested
1095 by Rudolf Cejka. The result of this is that the restore tree now
1096 uses red-black binary trees rather than simple linked lists. This
1097 should give rather dramatic speed improvements for directories
1098 contining large numbers of directories/files (more than 10000).
1100 kes Fix maxruntime bug #621.
1102 ebl Implement the include JobID in spool file name project.
1103 kes Reorder projects file in order determined by Jan 2007 vote.
1104 kes Implement item #12 on project list -- quick release of FD by
1106 kes Fix open of SQLite3 db where user does not have write permission
1107 so that DIR does not crash. Fixes bug #761.
1109 kes Add back missing @ in Win32 Makefile.
1110 kes Change 'Device not configured to autolabel' from INFO
1112 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1113 which should restart an indefinite # of times.
1114 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1115 other DIR specifications.
1117 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1118 Fix path quoting in SQLite scripts.
1119 Fix problems with SHGetFolderPath.
1121 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1123 kes Fix Job restart on error bug that promotes an Inc to a Full
1124 backup. This should fix bug #755.
1125 kes Add qt-console and first cut of code.
1129 kes Fix Bacula->Documentation link on Win32 to point to index.html
1130 instead of bacula.html. Fixed bug #750.
1131 kes Return JobId in db_get_job_record() when JobId==0. This should
1133 kes Do not release source pointers when restarting a failed job.
1135 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1136 This *should* fix bug #747.
1137 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1140 kes Modify USTORE constructor to set an empty store_source string,
1141 and don't copy the store_source string in a cancel. Hopefully
1142 this will fix Arno's seg fault, bug #744.
1143 kes Add back code to disable conio in configure. Fixes bug #743.
1144 kes Correct the Options scanner in the FD to correctly handle
1145 SHA1 option, which was eating the next option. Reported by
1147 kes Add code to indicate when the SD is spooling, spool wait, and
1148 despooling as requested by Alan Brown.
1150 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob