1 Technical notes on version 2.3
5 kes Tweak LICENSE file to mention BSD code.
6 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
7 if specified on the ./configure.
8 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
9 This class is intended to allow us to open a second bsock to the
10 Director while in the restore subdialog.
12 kes Fix configure to create bat Makefile before creating dependencies.
13 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
14 kes Add a tooltip to the tray monitor.
15 dvl Set the Director's PID file before dropping privs. This fixes
18 kes Update AUTHORs file
19 kes Increase the default max concurrent jobs to 20 in FD and SD to
20 correspond with the default .conf files.
21 kes Rewrite the Win32 service routines. This eliminates the 3 copies
22 some different, of the same file created by RN when porting the
24 kes Rearrange some of the Win32 directories and the placement of the files
26 kes Set DEVELOPER flag in version.h
28 ========================================================================
31 kes Apply a second doc patch from Marc.
32 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
33 improves the tips section that discusses how to setup multiple
36 kes Update bat README file.
37 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
38 corrects a typo in the Recycle status check in db_find_next_volume().
39 This will probably fix a number of annoying problems with multiple
41 kes Modify most of dird/msgchan.c to use bsock class calls rather than
42 bnet calls -- no functionality change.
44 kes Modify the Verify output to specify if files are missing on
45 the Volume(s) or disk. Fixes confusion in bug #916.
46 kes When more than one Volume is read in a migration job, the last
47 Volume bytes reported are from the last read volume rather than
48 the last written volume. Fixed. This fixes bug #910.
49 kes Fix display of Recycle flag after update volume=foo recycle=yes.
50 It previously printed New Recyle flag is: no. This fixes bug
53 kes Correct seg fault when switching tape drives during restore.
54 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
55 be used until after 2.2.0 release.
57 kes Remove fnmatch() in SD that permitted wild card specifications.
60 kes Fix %g in filename returned by SQL for browse tree reported by
62 kes Fix configure so that it puts config.out in the cwd rather than
64 kes Attempt to fix the locking problem reported by Eric in bug #906.
65 kes Make berrno class to leave errno unchanged after constructor call.
66 kes Make bnet_server use the heap rather than the stack to allocate
67 its socket fd pointers to avoid a crash at termination. Problem
68 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
70 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
71 and putting it in depkgs-qt along with Qt4.3.
73 kes Rework code in acquire.c that switches drives for reading when
74 the Media Type does not match. This should fix bug #906
76 ebl Fix a director segfault during job setup #907
77 kes Correct seg fault in postgresql when first operation returns no
78 rows. Fixes Dirks File browser problem seg fault with bat.
80 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
81 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
84 kes Implement PopUp YES/NO dialog for bat.
86 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
88 kes Correct RunScript to terminate job in FD on failure.
89 kes Change abort_on_error and AbortJobOnError to fail_on_error
90 and FailJobOnError in RunScripts.
91 kes Minor tweaks of code formating in RunScripts, principally to
92 avoid depassing 80 columns.
94 kes Eliminate one #ifdef Win32 in bsmtp
95 kes Implement grow tool to grow a file for testing very large databases.
96 kes Add big-vol-test to test Bacula seeking with > 5GB.
99 kes Modify find_next_volume() to return all values in Media record.
100 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
104 kes Update Release notes
106 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
107 Warning, in previous beta version, all media get from scratch keep their
110 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
111 This should fix bug #842. Made a note to look at removing the temp
112 files at the end of the install.
113 kes Add ability to mount and unmount a file device providing it is
114 marked as being removable and has the appropriate mount and unmount
115 commands defined in the Device resource. This fixes bug #830.
116 kes When applying a storage override, release all previous storage
117 definitions rather than just prepending the new storage.
118 This should prevent a good deal of confusion.
120 kes Implement ./configure search for qwt libraries.
122 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
123 Win32 FD. This should fix bug #893.
124 kes Remove an unnecessary beep in Win32 init code.
125 kes Update copyright dates in Win32 executable about boxes.
126 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
127 code with a BSD getopt.c and getopt.h.
128 kes Remove sched.h from the Win32 compat directory -- not used.
129 kes Remove the Exit menu item from the Win32 tray monitor. If you really
130 need to shut it down, do it through the services panel or the command
132 kes Remove some inappropriate Bacula FSFE copyrights.
133 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
134 kes Fix regress config non-portable test as pointed out by
135 Florian Heigl <florian.heigl@gmail.com>
136 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
137 as pointed out by Florian Heigl <florian.heigl@gmail.com>
139 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
140 Reported by Frank Sweetser.
144 kes Fix client-only build.
145 kes Integrate client-only fixes for bsys (initgroups) and conio from
146 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
147 kes Make arguments to get_scratch_volume() in same order as other
149 kes Rework the prune_volumes() subroutine so that after purging and
150 no volume found in desired pool, it will check for a scratch
151 volume. This prevents recycling the whole scratch pool.
152 kes Add code to status storage to print boffset_t (largefile support).
154 kes Move qwt (Graphics libarary for Qt4) to depkgs.
155 kes You now need a --with-qwt=<dir> to be able to build bat.
156 kes Update src/win32/cats/bacula_cats.def to include the new
157 db_get_query_dbids() call on Win32.
159 kes Correct a problem when selecting a scratch volume and moving
160 it to another pool that lost some columns.
161 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
162 kes Enhance Autochanger error messages to include Volume and device name.
163 kes Rework prune_volumes() code to take account of InChanger flag,
164 and to handle recycling volumes going to the Scratch pool and
165 current pool because the RecyclePool directive.
166 kes Implement a better and more efficient db_get_query_dbids() to
167 handle creating and passing back a list of DBIds.
171 kes Start work on new more efficient DBId subroutine. First use
172 will be for recycling volume to Scratch inchanger.
173 kes Increase number of JobIds in pruning from 1000 to 10000.
174 This to be replaced by above routine.
175 kes Begin implementation of building Qt4 on Win32.
176 kes Correct typo in fix I added for bad TLS shutdown.
177 kes Pull 2.0.3 patches into patches directory.
178 kes Update Release notes. Include qt-console in line count.
179 kes Update Projects file.
181 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
182 bug in migration code where a job that spanned two volumes
185 kes Implement new BST_DESPOOLING blocked state. Change from locking
186 during despooling in SD to blocking. This means that other threads
187 can work with the device structure, in particular the reservations
188 system while despooling.
190 kes Fix return in reservation message queue that missed clearing
191 the jcr lock (implemented 26Jun07 below).
192 kes Rename a number of dev methods to make locking function names
194 kes Document locking in lock.c. Move lock structures to new file
197 kes Move reservations message lock to lock jcr only this
199 kes Move main SD locking code into lock.c (new file).
200 kes Update Win32 build to include lock.c
204 kes Dirk committed the qwt library code for drawing graphs in bat.
205 kes Tweak install of qwt so that it is integrated with ./configure.
207 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
208 out by Eric (my typo).
209 ebl Fix configure.in to get batch mode enable
210 kes Return correct string from authenticate.cpp in bat when connecting
212 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
213 spurious line drops when using TLS.
214 kes Do not file reparse points when restoring a file that already
217 kes Implement Windows reparse points -- similar to directories, but
218 we do not descend into it. This is a first cut. They seem to
219 be backed up, but restore is not yet tested.
220 kes Remove restore_blocking in tls code when shutting a socket to leave
221 it in blocking mode. Hopefully this will fix the encryption bug
222 reported by Frank Sweetser.
223 kes When opening a file for backup, tell the OS that we are going to
224 read it sequentially -- optimization.
225 kes Change variable names in authenticate_director() to not conflict
226 with member names in bat. Caused great confusion with compiler,
229 kes Queue openssl error messages in case of comm problem.
230 kes Do shutdown() call if socket terminated.
231 kes Remove some duplicated code in tls.c
232 kes Move more of the bsock member variables into private and access
234 kes Add Frank Sweetser's tls-test to the regression suite.
236 kes Add Swedish sv.po file
238 kes Don't print clock skew message in FD if less than 3 seconds diff.
239 kes Add a bit of VSS info to status client.
240 kes Implement a first cut of Vista VSS, using Win2003 code.
244 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
245 loaded tape but uses first drive).
246 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
247 This was indeed a Win32 issue.
249 kes Simplify search of autochanger for in-use Volume.
250 kes Fix exit condition of check for in-use volume. kes Remove
251 inappropriate my_postgresql_free_result() in db_close()
253 kes Fix bad return in FD when encryption signature not found.
254 Probably caused a crash.
255 kes Inhibit missing encryption signature error messages for
256 file types where no signature computed.
257 kes Correct inverted check on autochanger in reservation system.
258 kes Tweak debug code in autochanger reservation.
260 kes Add some additional locking in the cats directory in subroutines
261 that modify packet variables called from batch insert.
262 kes Rework how dcrs are allocated. new_dcr() can now be called
263 with an existing pointer, and it will simply clean it up.
264 This allows the reservation system to test various different
265 devices, and will permit easy device changes.
266 kes A bunch of changes all over to handle new new_dcr() calling
268 kes Work more on the Volume management in the SD. Remember Volumes
269 for tape drives and for autochangers (even virtual disk changers).
270 kes When looking at the Volume list to reserve a drive, handle
271 autochanger names correctly by interating through the changer
272 devices. Also call the Director to see if a Volume is suitable
274 kes Fix some bugs in bscan. Make sure all media records are written.
275 Make sure that valid JobMedia records are written for disk files.
276 Previously they were completely wrong.
277 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
278 that the URLs don't change and so that the developers will all
279 work off the same copy. Rebuild from scrach.
280 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
284 kes Fix seg fault in FD from incorrect digest size.
285 kes Fix argument to non-OpenSSL crypto.c subroutine.
289 kes Remove a few malloc()s from the encryption code.
290 kes Use the class calls to bsock in filed/backup.c and restore.c in
291 place of the old bnet_xxx code.
292 kes Implement code that does an on the fly calculation of the
293 signing digest during restore of encrypted files. It makes
294 a best guess at the algorithm, and if it is not correct, will
295 then revert to the old code which reads the file after it is
297 kes Implement at least one missing crypto stream in stream_to_ascii()
298 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
299 #877 where a reload with bad syntax causes Dir to exit.
301 Cut: 2.1.14 beta (not released)
303 kes Do not free a volume on a tape drive until another volume is
304 mounted and read, or the autochanger unloads the volume.
305 This should help the SD re-use volumes that are already mounted,
306 and should fix bug #886.
307 kes Apply patch from user brettedgar that allows gnome2-console include
308 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
309 kes Apply patch from Lucien Weller that fixes day of week calculation
310 because of DST flag problem. Fixes bug #887.
312 kes Move find_next_appendable_volume() to after acquiring a valid device
313 in reserve.c. This fixes bug #864 -- confirmed by reporter.
315 kes Unable to reproduce bug 872. However added additional testing for
317 kes Bug #874 resolved by documenting SQLite limitations.
318 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
319 kes Bug #881 resolved by removing typo in mtx-changer script.
320 kes Made Frank Sweetser's wiki the official Bacula wiki with his
321 approval. Added a link to the wiki on the web page, and implemented
322 a backup from http://paramount.ind.wpi.edu
324 kes Fix update allfrompool to pass pool name.
326 kes Convert to pure GPL v2 license.
327 kes Fix sscanf problems reported by Peter Buschman that caused
328 a bus error on Solaris.
329 kes Rework (simplify) the select prompt in bat.
330 kes Move get_jobid_from_tid() into lib and create a
332 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
333 should definitely fix the problem of lost error messages in the
335 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
336 kes Eliminate tcpd.h from the project. Enclose the #include from the
337 library with extern C ...
338 kes Add print of signal name when a signal is trapped.
342 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
344 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
345 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
346 makes SQLit3 run 30 times faster, though a bit less safe.
347 kes Implement --with-batch-insert in configure and detection of thread
348 safe libraries. It is on by default, but turned off if no thread
349 safe library (e.g. SQLite 2) is available.
351 kes Fix Bacula PostgreSQL buffer overruns.
352 kes Do better checking for NULL results returned from PostgreSQL;
353 implement retry for failed queries; clear results buffer after
354 failed query. Hopefully this will correct the PostgreSQL failures.
356 kes Implement algorithm to handle only one appendable volume with
357 Prefer Mounted Volumes = no.
358 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
359 returned from a query.
360 kes Make volume lock recursive.
361 kes Implement an additional volume reservation algorithm that
362 starts by considering all reserved volumes then uses the
363 old brute force algorithm of searching the resources to
364 find a suitable device.
365 kes Add new reservations debug code and refine the old code.
366 kes Update the win32/dll/bacula.defs file.
368 kes Tweak reservations algorithm to permit a few more cases, i.e.
369 volume reserved, but on different drive, ...
370 kes Enhance SD status to include Pool and Media Type for drive in a
371 more readable format (a bit longer).
372 kes Fix PostgreSQL double free.
374 kes Minor refactoring of restore decryption code.
375 kes Add code to smartall.c to detect double free of a buffer.
377 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
378 so that bsmtp will create a correct email address (mailbox only).
379 kes Modify 'memory' command so that the buffers are listed as 'In use'
380 to avoid confusion with Orphaned buffers.
381 kes I reworked the OpenSSL include/lib flags to be handled in
382 the standard Bacula way, which should fix bug #863 concerning
383 non-standard OpenSSL libraries.
385 kes Implement Help Browser window for bat.
386 kes Fix reload bug that reset StorageId to zero.
388 kes Fix TLS #ifdefing when TLS turned off.
389 kes Ensure that when labelling a tape with Slot=0 that InChanger
391 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
393 kes Add StartTime to final uar_sel_jobid_temp query so that we can
394 add DISTINCT (required by PostgreSQL).
395 kes Implement BSOCK authenticate_director() method. Eventually will
396 authenicate all daemons.
397 kes Move several more functions into the BSOCK class.
399 kes Add code to tell the OS that we no longer need a cached
400 file that we were reading. In findlib/bfile.c. Also,
401 only cache files that we are reading. Thanks to
402 Tobias Oetiker <tobi@oetiker.ch> for the idea.
403 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
404 kes Implement script to automatically generate cats and dll .def
406 kes Update README.mingw32 to include new .def file generation.
407 kes Correct typo in UTF-8 error message as reported by:
408 jhernandez <julianhernandez@gmail.com>
409 kes Add additional sm_check() code on debug level 1.
410 kes Set default debug level to 1.
411 kes Trap SIGABRT in attempt to get traceback.
413 kes Reduce bat connect timeout from 30 to 15 seconds.
414 kes More restructuring and implementing BSOCK class in place of
416 kes Remove a few unnecessary malloc() tests in crypto code.
417 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
418 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
419 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
421 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
423 kes Fix Verify InitCatalog. The attributes were not pointing to the
424 correct saved location.
425 kes Implement message callback so that GUI is sure to get all
426 daemon messages. Currently displayed in a dialog in bat.
427 kes Ignore SIGUSR2 (Bacula timer) in bat.
428 kes Apply regress patch from bug #859 to allow regress to work
429 with Solaris compiler.
431 kes Begin adding TLS support to bat.
432 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
433 clean up lex.c and make it more readable.
435 kes Move more bnet functions into the BSOCK class.
436 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
437 kes Complete change of berrno strerror() method to bstrerror()
441 kes Cleanup incorrect email addresses in bsmtp.
442 kes Make bat display initial messages rather than discard them.
444 kes First cut of adding .mod to the run command.
445 kes Implement auto display of messages in bat.
446 kes Enhanced preferences to allow all Bacula output to be
449 kes Try to make bsmtp date routines more generic.
450 kes Fixed bug #856 autochanger documentation.
451 kes Rework bsmtp date editing for Win32. This fixes bug #854.
452 kes Add new cats entry point so Win32 builds.
454 kes Attempt to fix bsmtp date editing on OSes without %z editing.
456 kes Do better checking for the MySQL 64 bit libraries looking for both
457 .a and .so libraries.
458 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
459 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
460 kes Require the thread safe version of MySQL during configure. Thanks
461 to Andre Noll for pointing this out.
462 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
463 continuing in migration code.
464 kes Apply implementation of tray-monitor font derived from gnome-console
465 submitted by Andreas Piesk <a.piesk@gmx.net>
467 kes Eliminate important memory loss in SQLite
468 kes Fixed the batch insert MySQL thread specific data that was not
469 being freed. See cats/mysql.c:db_thread_cleanup().
470 kes Fix restore before command.
471 kes Convert old hdr.name to name() in a few places.
472 kes Implement update jobid command.
473 kes Return all time_t dates in db_get_job_record()
474 kes Stop watchdog in SD earlier.
475 kes Put Pool just after Storage in please mount message.
476 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
479 kes Update the po files.
480 kes Fix Verify InitCatalog by making it cache attributes.
482 kes Change name bacula-bat to bat for man 1 page to correspond to
484 kes Check for client and store NULL pointers in status command. This
486 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
487 kes Fix sign extended editing of %p.
488 kes Clean out a little old #ifdefing in cats/mysql.c
490 kes If time diff between DIR and FD is more than 600 seconds convert
491 INFO message to WARNING.
492 kes Implement heap size display in status for all daemons.
493 kes Attempt to fix MySQL db open memory loss (not successfull).
494 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
495 kes Eliminate memory loss in MySQL (possibly other SQLs) during
496 Query. This looks like a MySQL but but by doing extra releases,
497 the memory goes away. This should fix bug #847.
499 kes When backup fails, cancel SD before waiting for sd termination.
500 kes If SD is waiting for FD to connect during cancel, wake up the
502 kes Fix fsf code so that errno is correctly reported.
503 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
505 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
506 so that Bacula doesn't later stumble into a seg fault.
507 kes Use the term Restore Client in the restore Job report.
508 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
509 the original job's FileSetId.
510 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
511 spooling in migration jobs. Not yet tested.
512 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
513 reading conf file from a pipe. However, do it with open_bpipe()
514 rather than popen. Not yet tested.
516 kes Fix an ugly bug where the VolCatBytes were getting updated
518 kes Implement bconsole memory command that prints current memory
519 usage, plus smartalloc dump.
520 kes Clarify some error messages in backup, admin, and migrate.
521 kes Shrink label dialog to smaller size.
522 kes Invert Cancel OK buttons on restore to be OK Cancel.
523 kes More strerror() to bstrerror() conversions.
525 kes Start implementing bstrerror() in place of strerror().
526 kes Stripping path -- seems to work.
528 kes Prevent door and port files from being restored (mostly
530 kes Free an unreleased buffer in compat code.
531 kes Change console Job name from *Console* to -Console- to eliminate
532 Win32 filename problems. Put Win32 path separator when creating
533 Console file. This fixes bug #846.
534 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
536 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
538 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
539 to force Win32 error message.
541 kes First cut strip path. The data should be passed to the FD,
542 but nothing is done with it yet.
543 kes Enhance the digest and signature routines in the crypto
544 library to accept a JCR and to use it to print error messages
545 so that they will go in the Job report rather than the daemon's
547 kes Simplify some of the verify signature code.
548 kes Simplify a few of the alternative returns in the signature
551 ebl Use only POSIX regex instead of GNU regex in breg.c for
552 File relocation. It fix broken freebsd compilation.
553 kes Convert all other Dir files to use new ua class message
555 kes Tentative fix for missing digest signature in bug 807.
556 kes Correct handle problem in new win32_ftruncate routine.
557 kes Convert ua_purge.c and ua_update.c to use new ua class
558 message routines for bat.
560 kes Correct incorrect installation of LICENSE in Win32 installer.
561 kes Display LICENSE at the beginning of the Win32 install.
562 kes Attempt to correct the need for the png files to be installed
564 kes Reapply my bat.conf install script in qt-console. I think I
565 editted bat.pro instead of bat.pro.in and it was lost.
566 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
567 the /var/lock/subsys for subsysdir. Also corrects typos in the
570 kes First cut update job.
571 kes Correct configure to include qmake of src/qt-console directory.
573 kes Make restore job yes/mod/no print in one command so GUI works.
574 kes First cut implementing backup and restore client.
575 kes Correct editing in Verify output that caused a seg fault.
577 kes Insure that bat.conf is not overwritten during installation.
578 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
579 while I was implementing migration in March 2006 !
581 ebl Cleanup file relocation, using char *RegexWhere instead of
582 char *where + bool where_use_regexp
583 kes Update some manpages and add bat manpage.
584 kes Make a first cut at converting bacula.spec.in for bwx-console
586 kes Apply patch from John Goerzen to add hostname as fourth argument
587 to make_catalog_backup script.
588 kes Fix typos I introduced into bsmtp.c
589 kes Make pm_strxxx() routines handle input of NULL pointer. This
590 is to protect from NULL pointers returned from SQL databases.
591 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
592 kes Add more debug to FIFO code -- fix fifo regression test.
594 kes Implement posix_fadvise in FD, and for reading spool files in SD.
595 kes Add thread timer to bnet_connect() to break from OS if wait time
598 kes Update Win32 build to include new files, new symbols, and
600 kes Implement socket level heartbeat (tcp_keepidle)
601 ebl Commit File relocation patch
602 kes Make bat have 'make install' target.
603 kes Warn during install if old gnome-console binary found.
604 kes Warn during install if old wx-console binary found.
605 kes Add -8 option to bsmtp command line to add content type utf-8.
606 Fixes bug #809. (Character coding problem in bsmtp).
607 kes If < is found in target (from, to, cc) then do not enclose the
608 target in < > in bsmtp. Fixes bug #772 (malformed address).
609 kes When printing certain items in dbcheck, stop after 300000.
610 Fixes bug #822. (dbcheck loops).
611 kes Incorrect status in Dir after waiting for mount with poll set.
614 kes Extend idea of Prefer Mounted Volumes to mean a volume about
616 kes Print waiting to reserve a device every 5 mins.
618 kes Don't call close_part in label.c if tape and relabel.
619 kes Don't free volume if busy in close() -- should help with
621 ebl Fix #824 RunScript bug (After script could be execute twice)
622 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
623 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
624 Add a regression script to test RunScript
626 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
629 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
630 deprecated. No additional bugs will be fixed, and they will be dropped
631 in a future release (probably 2.4.0).
632 kes Change name of wx-console to bwx-console to make it more Bacula
634 kes Change the name of gnome-console to bgnome-console to make it
637 kes Some time in March, a Feature Request with patch from Jorj Bauer
638 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
640 The ability for the director to validate a Client (FD) CN against
641 an arbitrary set of patterns rather than the hostname, with
642 A new 'TLS Allowed CN' set of directives which are implemented
643 in the Client resource. Then pattern matching is used in place
644 of hostname matching against the Certificate's CN. As an example, we
645 have certificates which (a) use a local CA, and (b) have a CN of the
647 kes Add new/changed entry points to Win32 build
648 kes Create unaccepted-projects for projects that are not accepted.
649 kes Simplify locking in the reservations system.
650 kes Add more debug code in reservations.
651 kes Make sure error condition on reserving a volume is handled correctly.
652 kes Correct handling of volume_in_use.
653 kes Correct handling of initializing a device.
654 kes Move handling of broadcasting releasing a device into release_device().
655 kes Correct attaching dcr to dev so that it is only done if device
656 is properly initiated.
658 kes Locking debug level tweaks in SD.
659 kes Tweak new Volume code.
661 kes Add exec external-command [wait-seconds] to bconsole. This
662 executes the external-command. Note! normally external-command
663 should be enclosed in double quotes.
664 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
665 it should normally be off in a production system.
667 kes Implement die command for SD so that we can force it to dump.
668 kes Implement SD lock debug code.
669 kes Implement new algorithm for keeping Volume list in SD. It
670 is now owned by the device.
672 kes Implement new code for freeing in use volumes that should
673 resolve if not all, some of the problems of multiple drive
674 tape conflicts described in bug 801.
676 kes Fix gui/bacula-web/images files in svn.
677 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
679 ebl Fix a bug in batch mode (in string escape)
680 kes Correct migration prune SQL typo that crept in in a
683 kes Move bnet_despool() into class in bsock.c
684 kes Modify job report to include director name and Build OS.
685 kes Move drop root privilege and check_catalog() before fork.
686 kes Add update database scripts (version 9 to 10) to updatedb directory.
688 ebl Check size and age of each file after its backup to see if
689 it has changed during backup, if 'checkfilechanges' is set.
690 The FD will do an extra check (stat(2)) after
691 each file backup. mtime, ctime and size are compared with
692 'before backup' information. If time or size mismatch, an
693 error message will be generated. You must upgrade FD to use it.
695 kes Make database name and user configurable
696 --with-db-name=xxx --with-db-user=xxx
697 kes Add back database type to message.c for debugging.
699 kes Implement dir_sql() which issues an SQL query.
700 kes Modify bat medialist to use dir_sql() and do some minor C++
701 formatting as well as eliminating a number of pointers, simplifing
704 kes Fix some of the mtx-changer grep commands for tape label readers.
705 kes Convert a number of bsendmsg into the appropriate send/warning/error
707 kes Suppress the using database message in the .sql command.
708 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
710 kes Add context menu for floating a window.
711 kes Some minor cleanup and name changes in qt-console
712 kes Add doing mt setblk 0 in Win32 mtx-changer.
713 kes Apply Martin's bug fix to move definition of ENODATA for
715 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
718 kes More pruning cleanup.
719 kes Turn on wait_for_drive by default in mtx-changer.
720 kes Turn on Batch insert code by default as it now passes regression.
721 kes Add ./configure --enable-bat to enable building of Bat.
722 No install yet though.
724 kes Implement a new .sql command for bat.
725 kes Implement code to turn off pruning in obtaining the next volume.
726 Pruning is turned off for the status dir command, but turned on
727 for SD requests and for the list nextvolume command.
729 kes Correct Qmsg() that was not updated correctly when committing a
730 previous change (probably the recent TLS patch).
732 kes Write new subroutine is_volume_purged() that explicitly checks
733 if the Volume is purged, and if so marks it as such. This should
734 resolve problems reported about needing to mount twice to recycle
736 kes Rewrite pruning algorithm to do more work in the SQL engine, and
737 to pass a list of JobIds to be deleted to SQL. Also, minimize the
738 amount of duplicated code.
739 kes Do volume pruning only for the Media Type desired (reduces pruning time
740 if multiple Media Types are in the same pool).
741 kes Implement more detailed info in the Job report for the Bacula version
743 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
745 ebl Add bbatch tool to bench database and insert mode.
746 Fix sql quote stuff in batch mode
747 Fix sql stuff for mysql
749 kes Correct problems with am/pm scheduling. Fixes bug #808.
750 kes Implement new prunning code that prunes up to 1000 jobs at
751 the same time. The same technique can be applied to a number
752 of other prune/purge subroutines.
753 kes Add an insanity check when starting a new tape job to ensure
754 that the tape position has not been changed. If so fail the
756 kes Fix Win32 build for dlls to add the folllowing:
757 src/lib/bsock.c -- new file with new entry points
758 src/lib/dlist.c -- new entry points
759 src/cats/sql_create.c -- new entry point
760 src/cats/sql_cmds.c -- new DATA item exported
762 ebl batch mode cleanup bscan-test is ok now.
763 kes Implement SD code to check length of disk volume before appending.
765 kes Correct return status on db_batch... routines.
766 kes Add call to db_write_batch_file_records() to migration code.
767 ebl Fix AfterJob timing
768 kes Move the checking of the database in initializion of the Director
769 to after we drop privileges. This avoids the need for both root
770 and bacula access to the DB.
771 kes Correct a misplaced variable definition in src/filed/backup.c
772 kes Correct how the new batch insert db_create_attributes_record()
773 uses the arguments. Caused a seg fault in bscan.
774 kes Implement lock() and unlock() methods in DEVICE class.
775 Implement block() and set_block(xx) methods in DEVICE class.
776 kes Modify bnet_connect() so that it uses time() to check for the
777 wait time expiring (on some OSes, some system calls may not
779 kes Modify Verify to obtain the previous JobId when it is actually
780 running rather than at schedule time (as it was in 1.38.x).
781 kes Fix src/job.c to handle MaxWaitTime correctly. This should
783 kes When checking pid in pid file, continue running if the pid is
784 the same as ours. This occurs on IRIX after a system crash.
787 kes Extend new GUI API.
788 kes Make the ua structure a class, and implement send_msg(),
789 error_msg(), warning_msg(), and info_msg().
791 kes Apply fix from for building wx-console on the Mac from
793 kes Implement new select mechanism for GUI programs.
794 kes Reorganize initialization of stackedWidgets in bat.
796 kes Add updated nagios plugin supplied by Christian Masopust.
798 kes More bat implementation.
799 kes File migrate bug with Pool Occupancy using mediaid instead
800 of jobids. Fixes bug #795.
801 kes Fix orphaned buffers in filed backup and verify due to
802 crypto buffers not freed during errors. Fixes bug #789.
803 kes Extend new GUI api code to tree commands.
804 kes Ensure that tree and dot commands check console ACLs.
805 kes Permit marking directory with trailing slash.
806 kes Allow 20 console connections (instead of only 10).
808 kes Add smartctl call to bacula-sd.conf as an example of getting
811 kes Modify jobq.c to let simultaneous restore jobs run. This may
812 cause them to fail if they cannot get a drive.
813 kes Add Client Connect Wait to Storage daemon to permit users to
814 modify the time the SD waits for a FD connection.
816 kes Correct virtual changer check which was backwards. This caused
817 volumes to be unloaded into slots already occupied.
819 kes Apply Command ACL filter to JobId list in restore command.
820 kes Correct typeo in var.c patch.
822 kes Don't let Bacula prune File or Job records for the current Job.
823 kes Fix variable substitution pad + inc bug reported (with patch)
826 kes Correct SQLite log table index as reported by Luca Berra.
828 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
830 kes Begin implementing new comm signals for API.
831 kes Fix a few places in lib/message.c where the open fd may
833 kes Continue implementing lib/bsock.c (real class). Make jcr,
834 who, host, and port private. There are new methods to access
835 them for non-class use. This required touching a number of files.
837 kes Add LANG=C to autoconf/randpass so it works with languages other
838 than English. Fixes bug #788.
840 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
842 You will not be able to generate Include/Exclude list any more.
843 It will be fixed soon.
844 If you want to use this, you can apply
845 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
847 kes Restore of sockets created false error messages because Bacula
848 no longer restores sockets, but the code was still trying to
849 set the attributes on a non-existent file. Reported by a user.
850 ebl finish RecyclePool feature
851 Media will takes Pool.RecyclePool
852 when moving from Scratch to a Pool or when user will do
853 update volume=xxx frompool
854 To use it, add RecyclePool = aPool to your Pool resource
857 RecyclePool = Scratch
861 kes Expand new BSOCK class adding signal() and new BNET signals.
862 kes Begin enhancing the dot commands adding a new API function
863 that returns more information and will make it easier
864 to interface to the Director from a program.
866 kes Make DEVICE fd private. Its new name is m_fd, and can be
867 obtained with dev->fd() outside the class. This is the
868 first of many DEVICE members to be made private.
869 kes Implement Michael Renner's idea on having a virtual disk
870 changer. I made some minor modifications (e.g. I did not
871 implement the Virtual Changer directive, but simply set
872 the Changer Command to an empty string.
874 kes Implement a BSOCK send() method that writes the whole record
875 in a single write() request rather than in two.
876 ebl add update volume=xxx recyclepool=yyyy
877 volume takes recyclepool from pool when using update volume=xxx from pool
879 kes Fix encryption deblocking bug, which caused some restored files
880 to be truncated. This fixes bug #763.
881 kes Add FD event sequence order prepared by Eric -- for RunScripts.
882 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
884 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
885 ebl Use btime_t instead of uint64_t in media patch.
887 kes Optimize the use of the database a bit in the Status dir command.
888 Only open it when needed, ensure that if any previous database
889 was opened, it is closed.
891 kes Correct VolCatBytes bug from media patch.
892 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
893 in the case of orphaned records.
894 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
895 and File records in 300K chunks to be more efficient. This
896 idea came from Juan Luis Frances (if I remember right).
897 kes Apply Eric's scratch patch that moves a purged Volume to
898 the RecyclePool. Question: how is RecyclePool set? what
899 happens to the ScratchPool?
900 kes Apply Eric's media patch that collects read/write media
901 times as well as byte counts. This patch requires a
902 simultaneous upgrade of the DIR and SD. Note, there
903 should be some way to turn off timing. I'm not sure
904 times are in Bacula units.
905 kes Apply Eric's batch-insert patch.
907 kes Update projects list.
909 kes Implement Include/Exclude file lists in FD as dlists using
910 the new dlistString class. This permits efficiently having
911 large include/exclude lists and completes project Item 25.
912 kes Fix dird/ua_cmds.c so that a cancel command checks if the
913 console is authorized to cancel the job. This fixes bug
915 kes Modify SD so that the VolCatJobs medium record is updated
916 at the beginning of a Job rather than the end. This
917 fixes bug #775 where exceeding MaxVolJobs caused jobs
919 kes Added a mutex around getting and setting Volume information
920 so that multiple simultaneous jobs will single thread.
922 Switch to using Subversion
923 kes Remove src/pygtk-console/ from configure
925 kes Delete src/lib/btree.c from win32 build, then add rblist.c
926 plus the entrypoints.
927 kes Apply patch supplied that corrects debug print
928 in canceling jobs for max run time. Supplied as
929 part of bug #621, which was previously fixed.
931 kes Test on job_canceled() and sd_msg_thread_done inside
932 loop starting the message thread to avoid a race condition.
934 kes Remove rl_catch_signal from console.c as it conflicted
935 with the header definition. Fixes bug #765.
936 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
938 kes Clarify some stored/acquire messages to indicate if the
939 problem is with read or append.
941 kes Fix memory leak with storage ids in cats/sql_get.c
942 kes Terminate watchdog earlier to avoid reference to released
943 memory -- reported by Jason Austin.
944 kes Move closing the database from jobq.c to the director daemon
945 termination routine. This fixes memory leaks for shadow jobs
946 (i.e. migration jobs).
947 kes Free up the unique jobid chain items in migrate.c. This fixes
948 a memory leak problem.
949 kes Convert some ugly looking for statements to use foreach_alist
950 in findlib/find.c. This will facilitate converting the structures
951 to use dlist (for large include/exclude lists).
952 kes Fix a bug in the btree.c and btree.h routines, then rename them
953 rblist and add them to be built in src/lib. Include some new
954 methods written by Rudolf Cejka that make the code more readable
955 (hides some of the ugly casting).
956 kes Add set_next() and set_prev() methods which make the code much more
957 readable. Also add a new dlistString class that facilitates storing
958 strings in dlists. To be used in the large include/exclude lists.
959 kes Make some trivial modifications to lib/tree.h that use rblist
960 rather than dlist for storing the tree links. This was suggested
961 by Rudolf Cejka. The result of this is that the restore tree now
962 uses red-black binary trees rather than simple linked lists. This
963 should give rather dramatic speed improvements for directories
964 contining large numbers of directories/files (more than 10000).
966 kes Fix maxruntime bug #621.
968 ebl Implement the include JobID in spool file name project.
969 kes Reorder projects file in order determined by Jan 2007 vote.
970 kes Implement item #12 on project list -- quick release of FD by
972 kes Fix open of SQLite3 db where user does not have write permission
973 so that DIR does not crash. Fixes bug #761.
975 kes Add back missing @ in Win32 Makefile.
976 kes Change 'Device not configured to autolabel' from INFO
978 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
979 which should restart an indefinite # of times.
980 kes Fix configure --help to print --with-mysql[=DIR]. Same for
981 other DIR specifications.
983 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
984 Fix path quoting in SQLite scripts.
985 Fix problems with SHGetFolderPath.
987 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
989 kes Fix Job restart on error bug that promotes an Inc to a Full
990 backup. This should fix bug #755.
991 kes Add qt-console and first cut of code.
995 kes Fix Bacula->Documentation link on Win32 to point to index.html
996 instead of bacula.html. Fixed bug #750.
997 kes Return JobId in db_get_job_record() when JobId==0. This should
999 kes Do not release source pointers when restarting a failed job.
1001 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1002 This *should* fix bug #747.
1003 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1006 kes Modify USTORE constructor to set an empty store_source string,
1007 and don't copy the store_source string in a cancel. Hopefully
1008 this will fix Arno's seg fault, bug #744.
1009 kes Add back code to disable conio in configure. Fixes bug #743.
1010 kes Correct the Options scanner in the FD to correctly handle
1011 SHA1 option, which was eating the next option. Reported by
1013 kes Add code to indicate when the SD is spooling, spool wait, and
1014 despooling as requested by Alan Brown.
1016 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob