1 Technical notes on version 2.3
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
20 Improved status commands for Bat
21 Spooling/despooling status
22 Implement ftruncate for NFS devices
23 Add long term statistics job table
28 kes Remove double quotes from ChangeLog and ReleaseNotes
29 kes Remove StorageId test when pruning and recycling (Eric's changes).
30 kes Remove old form of locking when getting volumes -- causes deadlock.
31 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
32 the name unique and to eliminate compile time error.
33 kes Add accurate.o to Win32 FD Makefile
35 kes Fix cats dll build on Win32 after db_update_job_end_record
36 calling sequence change.
37 ebl Switch to tokyo dbm instead of htable in accurate code
38 ebl Include tokyo dbm to bacula source tree
40 kes Fix buffer overruns detected by Coverity.
42 kes Tweak joblog display.
44 kes Implement --without-qwt
45 kes Fix layout of restore tree dialog
46 kes Add configure bat QWT libraries, so that bat can be built
47 with or without the QWT libaries.
49 ebl Add dummy tape driver for regression tests.
50 kes Make sure we unload the right slot when swapping.
52 kes Add debug times, reduce size of two-pool-changer test
54 ebl Tweak autoconf scripts for faketape
56 kes Improve SD reserve debug code.
57 kes Testing an improvement to free up volumes no longer in use.
59 kes Rework SD acquire for read to handle autochanger Volume
61 kes Implement regression that explicitly tests swapping a Volume
62 from one drive to another.
63 kes Enhance disk-changer to detect most error conditions.
64 kes Fix SD code so that it properly swaps a Volume between drives.
67 kes Apply libdbi patch from Joao Freitas for regress and for
68 Bacula trunk. Regress now works with libdbi. Nice.
69 kes Apply .nobackup patch from bug #1077 submitted by
71 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
72 name into jobs cloned via the run directive.
74 kes Prevent a Volume that is being swapped from being freed from
75 the volume list. This will most likely fix, at least partially,
77 kes Fix strippath so that it does not get a buffer overrun and crash FD.
79 kes Remove 50 millisec wait in SD that broke debugger.
80 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
81 that a job may run, counted from when the job was scheduled.
82 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
83 a job may block waiting for a resource, counted from when the job starts
84 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
85 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
86 that implements multiple commands per line in the console when using
87 readline. Modify the default to use a semicolon as the command separator.
89 ebl Fix SQL query in migration code.
90 ebl Make accurate mode with hash disk pass regression tests
92 ebl Implement first cut of accurate backup with hash disk.
94 kes Force unload of volume when wrong volume mounted in SD.
96 kes Fix bat seg fault at termination.
97 kes Add Bacula generated version to bat about box.
100 kes Experiment with allowing multiple read jobs.
101 kes Move final volume swapping code to DCR method and
102 call it from acquire_for_read().
103 kes When wrong volume is mounted during read, unload_autochanger.
105 kes Integrate the libdbi changes from Joao Henrique Freitas
107 kes Stop searching for Volumes in SD askdir if DIR returns the
108 same volume name twice in a row.
109 kes Close bat console windows first to eliminate error message
112 kes Tweak the swap Volume from one drive to another code so that
113 it now seems to work.
114 kes Resolve several problems with recycling that broke the new
115 code (these problems are in 2.2.9 as well).
116 kes Remove the volume lock when calling the sysop code.
117 kes Don't mark a reserved volume with no writers as unused otherwise
120 kes Rework class structures for VOLRES, DCR, and DEVICE to make
121 the method names a bit more logical, and for more logically
122 handling the responsibilities.
124 kes Remove redundant code in terminating the scheduler that just
125 causes a seg fault in many cases.
126 kes Cleanup releasing a volume and make it a DCR method.
127 kes Improve algorithm for detecting pre-reserved volume and
130 kes Tweak volume swapping code so it works.
131 kes Correct name overloading in mount.c
132 kes Replace released flag in VOLRES with reserved and add access
133 methods for the VOLRES class.
134 kes Prevent volume from being released while being swapped.
135 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
137 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
139 kes Refactor parts of stored/mount.c
141 ebl Add sanity checks for VolWriteTime and VolReadTime
142 ebl Take care of bad clock changes while computing VolWriteTime
143 and VolReadTime. This should fix or limit #1066
144 kes Correct error string numbers in dird/catreq.c
145 kes Restructure reserving, acquiring, and mounting volumes. Calls to
146 autochanger are deferred for mount.c -- simplifes the code.
148 kes Do not prune any running job. It just fails the job.
149 kes Lock the volumes when changing dev->reserved_device and marking
150 the volume unused otherwise the device can get reserved by
151 another job before the volume is released, thus blocking it.
153 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
154 kes Fix bug #1063, reuse of freed ptr in list nextvol.
155 kes Release regex compile buffer in filed/job.c
156 kes Add proper type of const char in sql_create.c
157 kes Turn off debug in daemon termination routines
158 kes Move free_volume_list() before devices are freed in stored.c
159 kes Fix reference to uninitalized stack variables in bregex.c.
160 This should correct bug #1067.
162 kes Fix possible seg fault in SD when freeing a volume entry.
164 kes Implement unload_dev() before swap device.
165 ebl Add statistics prunning with option and menu
166 kes Separate unload_dev() from unload_other_device() in autochanger.c
168 kes Apply patch from bug #1069 that corrects spurious error messages
169 when ACLs enabled on SGI but no ACL exists.
170 ebl Fix small segfault in bacula-sd when debug level is 500
171 kes Modify run_program() and run_program_full_output() to use
172 call by reference for the results string. This corrects a long
173 standing problem where the address of the string may be changed
174 in the subroutine but not in the calling program.
176 kes Re-enable code to remember last volume mounted on a non-tape
178 kes Add patch supplied in bug #1068 that fixes a SD crash when using
179 a Virtual autochanger.
180 kes Generate correct JobMedia records during spooling/despooling when
181 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
182 <tih@hamartun.priv.no> for excellent analysis and testing.
184 kes Tweak hash algorithm for htable using Martin Simmons idea
185 for doing a circular shift.
186 kes Remember what volume is in VTLs (previously turned off for
188 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
189 pointed out some problems in creating JobMedia records during
190 spooling with concurrent jobs. Fix the problem by updating the
191 start file position before despooling and generate a jobmedia
192 record at the end of despooling.
194 kes Fix handling of JobMedia records during spooling and when a
195 Volume is changed without actually writing data to the Volume.
197 kes Rework certain SD locking based on gdb tracebacks of deadlocks
198 sent by Eric. This code now uses only the volume_lock() rather
199 than the reservations lock when at EOM and acquiring a new
201 kes Ensure only one exit point in several subroutines.
203 kes Implement bsock code to permit locking. Use the new code in Verify
204 in the FD to prevent the heartbeat thread from disrupting the Verify
205 data sent to the Dir.
206 kes Modify SD locking to eliminate locking the reservations system from
207 outside the system. Use the volume lock when getting media data
208 and reserving a new volume at end of media.
209 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
210 when SD starts are not locked into place.
212 kes Fix error compiling runscript code on 64 bit machines.
213 kes Tweak Win32 mount point code.
214 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
215 cleared giving bad file estimate).
216 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
219 kes Keep Schedule run lists in order as suggested by
222 kes Implement autostart scripts for Debian.
223 ebl Implement upgrade catalog scripts.
225 ebl Apply jobstat patch for long term statistics. Have to implement
226 purge stats command and upgrade scripts.
227 kes Fix mtx-changer.in for broken Debian mt program.
229 kes Fix large number of JobMedia records reported by Eric Bollengier.
231 kes Apply doc fix from bug #1062.
232 kes Resolve crash and improper restore wx-console Win32 restore
233 GUI. Fixes bug #1065.
234 kes Update Win32 wxWidgets to latest version.
235 kes Attempt to do correct handling of Win32 mount points. Should
237 kes Fix Win32 FD backup/restore memory leak due to improper termination
238 of BackupRead/Write. This fixes bug# 1038.
240 ebl Reduce memory usage for accurate backup, working only with ctime
241 and mtime. (not all Lstat field)
242 About 40MB for my linux system (400.000 files)
244 kes Add dcr->reserved_volume flag that allows us to release a volume
245 even if it is not vol->released. This allows maxvol2 to work when
246 Volumes expire and we are already writing to the device (i.e. a
247 volume is pulled out from under us by another job terminating after
248 we reserve the drive).
250 ebl Permit multiple command/console per runscript definition.
251 RunScript { command = /bin/true ; command = /bin/false ... }
252 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
253 (restart an application) just after the VSS snapshot on windows.
254 kes Don't zap dcr values during release_volume() as they might
255 have the next Volume to be mounted.
256 kes Fix AIX prototype.
258 kes Second cut of drive switching during backup.
261 kes Update Win32 version of wxWidgets to most recent version.
262 kes Tweak Copy job details.
263 kes Rework dir_find_next_appendable_volume to make a bit more effort
264 to find a suitable volume before giving up.
266 kes Make ask_sysop_to_create... to return if waken from wait.
267 This helps get out of blocked conditions.
268 kes Experimental implementation of switch_device in reservations.
269 kes Implement FD version to allow easier protocol changes.
270 kes Add Plugin Options string -- not yet passed to FD.
271 kes Implement PluginOptions ACL.
273 kes Attempt to correct problems with restores with autochangers and
274 use counts going negative
275 kes Rework SD status command and implement API for bat. Implements
276 header, runing waitreservation, devices, volumes, spooling,
277 and terminated status keywords.
278 .status storage=xxx <keyword>
279 kes Clarify TLS error message by adding double quotes around name.
280 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
281 kes Pass jcr to tls routines so debug messages can be handled better.
282 kes Rework jobq resource allocation code, and possibly fix a bug
283 that caused reference counts to get out of sync.
285 kes Rename fd/dir plugin to use Bacula standard underscore.
286 kes Plugin work -- bring dir up to fd level.
287 kes Start implementation of VTL code
288 kes Fix Win32 build after adding new cats subroutine.
290 kes First cut at Duplicate Job implementation.
292 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
293 kes Start PluginOptions string, and refactor a bit of ua_run.c
294 ebl Apply Allan patch that permit to reset recyclepool.
296 kes Test patch -- possible fix or improvement for bug #1053
297 kes Refactor FD and SD status commands to permit new API code in
298 SD, and to fix Win32 build.
299 kes Win32 build is now working.
301 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
302 some ideas in patch from Scott Bailey.
303 kes Begin implementation of duplicate Job control.
304 kes Fix some of Win32 build after recent additions.
305 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
306 which causes the FD to detect whether or not the OS has the
307 honor no dump bit (*BSD systems), and if so, to skip backing up
308 any file with this bit set. The feature is enabled by setting
309 'honor no dump flag = yes' in the Options section of a FileSet.
311 kes Correct po warning message with datarootdir
312 kes Implement more code in dird.c to put configuration parsing in
313 a class rather than use globals.
314 kes Restructure SD status command for implementation of bat API
317 kes Suppress incorrect 'Will not descend from x into y' messages.
318 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
319 daemon globals used by parser.
320 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
322 kes Fix free of plugin_list when none exists.
324 ebl Apply accurate project patch.
326 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
327 on non-mempool object)
328 kes First cut of converting FD .status to work with bat API.
330 .status client=XXX header
331 .status client=XXX running
332 .status client=XXX terminated
333 kes Implement first cut of Copy Job.
334 kes Implement Catalog in Pool resource. It overrides catalog specified
335 in the Client resource.
337 kes Apply patch (with some difficulties) from Joao Henrique Freitas
338 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
340 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
341 ftruncate() actually works. In the case of some (cheap) NAS devices,
342 it does not, and so recycling NAS Volumes does not work. The code
343 simply unlink()s the file, then recreates it. This fixes bug #1011.
345 kes First incomplete cut of big malloc blocks for htable.
346 kes Tweak plugin code.
348 kes Plugin debug code + tweak a couple bat dialog layouts
350 kes Fix creating first JobMedia record during Migration to include
351 proper index. This caused slow restores of migrated jobs.
352 kes Temp fix to plugin name file_index.
353 kes Bacula backed up and restored a MySQL database.
355 kes Implement plugin restore.
356 kes Implement parsing of db_driver to give db_type index.
358 kes First cut of plugin restore code.
359 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
360 and do not strip paths on symbolic links.
361 kes Set catalog backup database and user name from values specified on
362 the ./configure line.
363 ebl Fix #1031 about wrong pool source information in job report.
366 kes Remove a redundant jcr argument to find_files, match_files, and
368 kes Implement '.status dir header|scheduled|running|terminated' that
369 prints the requested status section. With the exception of the
370 header, the other reports have fields separated by tabs (\t).
372 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
373 a resource embedded run command to find a since time if no explicit
374 since time was supplied on the command line.
375 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
376 that updates the state file at job termination time in addition to
377 when the daemon terminates.
379 kes First version where a plugin did a backup.
380 bpipe-fd.so created a backup file, wrote a test
381 string to it, and Bacua could restore this fabricated file.
383 kes Implement DB Driver = string for the DBI driver.
384 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
385 kes First cut of code for loading Win32 plugin dlls. Implement
386 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
387 and implement a dlfcn.h file based on opengroup's definitions of
390 kes First cut plugin directives.
392 kes Apply patch from bug #1049 to prevent stripping the path on a
394 kes Attempt to fix bug #1047 where stripping a path corrupts the
395 heap. Waiting for feedback.
396 kes Correct the Mount message not to suggest labeling a new tape
397 when doing a restore. Submitted by email by John Stoffel.
398 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
399 FD by using casting. Reported in bug #1042.
401 kes A bit of crypto cleanup. More later.
403 Release Version 2.2.8
405 kes Apply patch from Martin to correct bug #1040, bscan sets existing
407 kes Fixed important spelling error in doc -- bug #1045.
409 ebl Fix bextract to be able to extract non-portable Win32 data to
411 kes Move initialization of read/write res lock earlier in the code.
412 This fixes the crash with a null conf file. This fixes bug
414 kes Redefine CURES in lib/parse_conf to be URES and move it all
415 into lib/parse_conf.c -- this responds to bug #1042, but does
416 not fix it. The fix is not to compile with FORTIFY_SOURCE.
417 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
418 the trunk SVN. I don't think this was reported as a bug.
420 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
422 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
424 kes Add DataDespooling and DataCommitting status (committing is
425 the last despooling).
426 kes Finish implementation of new reservations code noted below.
428 kes Fix bsnprintf for float point numbers. I broke recently when
429 parameterizing some variables. This fixes bug #1036.
430 kes Undo recent reservations changes ... will apply them later
431 when they work better.
433 ebl Fixes #1034 which cause mysql to hang the connection after 8h
434 ebl Change default statistics target of filename.name and path.path
435 fields for PostgreSQL. This speeds lookup by indexes. Thanks
437 kes A few more tweaks to new reservation code. Make sure to clear
438 vol released flag when retaking volume. When reading label and
439 label is bad mark volume unused. When recycling, mark volume
440 unused so it can be renamed.
442 kes Fix reserve_volume() so it doesn't release a volume in use
443 (i.e. a volume entry not marked released). This should be
444 the last part needed to fix bug #1018.
446 kes Move Heartbeat documentation from Job to Director resource.
447 This fixes bug #1033.
449 kes Fix existing switch drive SD code to call autochanger to release
450 any old volume. This must be done to keep the autochanger from
451 releasing subsequently newly reserved volumes in doing a close().
452 This should fix bug #1018.
453 kes Fail if attempting to get console input in batch mode. This
454 should help fail RunScript console commands that are incomplete.
455 kes First cut implementing switch_drive() in SD (not actually called).
457 kes Implement first cut running console commands in a RunScript.
459 ebl Fixes bug #1028 where 'Selection Type' option was not usable
461 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
464 Release Version 2.2.7
466 kes Add new free_tls() entry point so that Win32 builds.
467 kes Fix compile warning in src/lib/util.c
468 kes Fix entry point for edit_job_codes() so that Win32 builds.
469 kes Fix seg fault Frank Sweetser reports in regression testing
470 on his systems. The problem was that the original author of
471 bsnprintf.c did not take into account the side effects of
472 using ++x in the argument to a #define.
473 kes Make SD protocol backward compatible with version 2.2.x.
475 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
476 because Bacula no longer restores sockets.
477 ebl Always use ignorecase fileset option on win32 FD.
479 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
480 that implements double quoting include names in conf files,
481 and also allows piping input by having the first character
482 be a vertical bar (|).
483 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
484 that implement %f in RunScripts to pass the FileSet name.
485 kes Skip leading | when lex input comes from a pipe as suggested
486 by Michael Stapelberg <michael@stapelberg.de>.
488 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
489 Nerijus Baliunas <nerijus@users.sourceforge.net>
491 kes Implement Plugin Directory and plugin events.
493 kes Implement a security enhancement: TLS authentication but no
494 encryption. Enabled by setting 'TLS Authentication = yes'.
495 Note when this is on, TLS encryption is turned OFF!
497 kes This patch corrects a problem where the maximum concurrent storage
498 jobs counter gets out of sync during restore jobs causing jobs to
499 'wait on max Storage jobs'. This patch fixes bug #1009.
501 kes This patch fixes bcopy so that it produces correct Volumes.
503 kes This patch eliminates spurious output to the console during a VerifyVolume
504 job that contains encrypted data. It fixes bug #1024.
506 kes This patch prevents the 'status dir' command from trying to use a scratch
507 volume and possibly moving it from one pool to another. This patch fixes
510 kes Add new include to postgresql.c suggested by Marc Cousins so
511 that it compiles correctly with pgre version 8.3.
513 kes Fix --archivedir addition to configure. Replace it with
514 --with-archivedir in configure.in This fixes the regression
516 kes This patch fixes bug #1012 where the job is canceled because
517 of Max Run Time exceeded when the job has not yet started.
519 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
520 one 'part' to write. Instead of each part being stored on disk,
521 written to DVD, then deleted from disk, all parts are written to disk,
522 and only the last is written and deleted from disk.
523 kes This patch fixes the status command to include the formating string for
524 JS_AttrInsterting. It fixes bug #1021.
525 kes This patch should fix the Mac OS X build problem on the latest
526 Darwin, where sys/types.h was not included correctly (apparently
527 due to a change in the Mac headers). The solution was to explicitly
528 ensure that it is defined for the ./configure.
529 This patch also has a rebuild of configure that includes the Debian
530 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
531 kes This patch should ensure that queued messages to the console are
532 displayed as soon as possible. It should fix bug 1007, but has been
533 reported not to work.
535 kes This patch fixes the infinite loop when trying to increase the
536 maximum number of volumes in a Pool during the add command.
537 This patch fixes bug #1008.
539 Release Version 2.2.6
541 db Remove extra data on estimate command in joblist for bat.
543 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
544 really change anything, but is the beginning of doing it *right*.
545 To do it completely right the LastWritten date must be passed to
546 the SD, but it is not yet done.
547 kes Minor tweaks to some bat restore SQL.
548 kes This patch fixes bug #1003 where putting the message output from
549 a Verify job into the catalog results in a recursive loop. The problem
550 seems to show up only with postgresql (to be verified).
551 kes Correct %x to %p in postgresql debug statement.
553 kes Fix bug #942 where lots of emails where generated when the heartbeat
554 interval was low and Bacula wanted a different tape from the one in
557 ebl Add new SD despooling attributes and Dir inserting attributes
558 job status codes in the catalog (Status table).
560 ebl Use qmake-qt4 instead of qmake when available (debian system).
562 kes Add a security warning to src/cats/make_catalog_backup.in indicating
563 that passing the password via the command line (arg 3) is insecure.
564 This responds to bug #990 (it doesn't fix it).
566 kes Set default debug_level to zero. This corrects bugs #991 and #993.
567 kes Fix a crash in bat when it cannot connect to the Director for example
568 if the Director is not running.
569 kes Remove redundant INDEX (JobId) from File table in the trunk.
571 kes Make explicit exception to GPL in LICENSE to permit linking
572 the Win32 FD with Microsoft VSS code.
573 kes Apply the Solaris package patch from
574 Masopust, Christian <christian.masopust@siemens.com>
575 kes Apply the patch to optionally add a timestamp in the debug output
576 submitted by Mariusz Czulada <manieq@wp.eu>.
578 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
579 backend (sql_strerror). Fixes bug #989
581 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
582 It applied with no problems.
583 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
585 kes Redirect stderror to stdin on mt status command in mtx-changer.in
586 since the status is returned on stderr on Solaris.
587 kes Activate Close button on tray-monitor window. This fixes
589 kes Check for NULL item in parse_conf.c before calling it. In the
590 case of Device, there is no item and this caused a seg fault when
591 Device appears in the conf file.
592 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
593 avoids pulling in config.h multiple times in some new code.
595 kes Fix spurious warning message printed when creating a volume with
596 a LabelFormat. This fixes bug #976.
598 Release Version 2.2.5
600 kes Add JobId in place of Job name in all the Jmsg() output.
601 kes Correct the APP_DESC for the Win32 storage service (remove an e).
603 kes Make maxvol-test and new more strict maxvol2-test work.
604 kes Print JobId in all Jmsg() job output.
606 kes Add new SD despooling attributes and Dir inserting attributes
607 job status codes. This fixes bug 961.
608 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
610 kes Fix doc issue. This fixes bug #963.
611 kes Fix listing performance problems in bat. Pointed out by
613 kes Remove old debug code.
614 kes Fix bat code that tests for Win32. This should fix bug #968
615 kes Query 5 list wrong Vol after migration. This fixes bug #960
617 ebl Fix #969 where user can't change Replace option in restore menu.
619 kes Save jcr in thread specific data (tsd) for each thread.
620 kes Make Dmsg() print JobId as -%u.
621 kes Make Jmsg, Emsg, and others automatically pickup the jobid
622 for the thread if it exists.
623 kes Remove old reservation debug jid code.
624 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
625 ebl Add an option that permit to specify spool size in job
626 definition. (Applying patches/testing/spoolsize_per_job.patch).
627 You must upgrade SD and DIR at the same time.
628 dvl Add new configuration item --archivedir
629 dvl Adjust regression tests to use tmp not /tmp. This will allow
630 multiple concurrent runs of the regression tests.
632 kes Fix race condition that drops final block written to volume.
633 This happens in rare cases with multiple simultaneous jobs
634 when the Volume fills. This fixes bug #964. May be related
635 to bug #935 and possibly #903.
636 kes Eliminate more strerror() and replace with bstrerror().
637 kes Remove BSD getopt and replace with unrestricted IBM version.
638 kes Fix Win32 build for changed calling sequences.
639 kes More tweaks to the mount volume routines to get everything
640 right. Changed variable name from find to have_vol, which is
641 much easier to understand.
642 kes Enhance btimer debug code.
644 kes Fix FD->SD authorization failure, which was due to spurious
645 wakeups from a pthread_cond_timedwait(). Simply check the
646 predicate before continuing. This fixes bug #953.
647 kes Add const char where needed (more to do). Remove temp debug code.
649 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
650 kes Don't overwrite error message in check_tables_version.
652 kes Unlock batch insert tables with same calls used elsewhere.
653 kes Allow starting 59 jobs a second.
654 kes Make SD session key more random.
655 kes Add retry for SQLite opening db if it fails. Probably helps
657 kes Suppress extra error messages during batch insert failure.
659 kes Add jcr to timer packets so if killed message can be sent to job.
660 kes Add JobId to all Dmsg() output.
661 kes Put some FD auth code on dbglvl rather than fixed.
662 kes Return insert attributes error message in db msg buffer to avoid
663 false error messages. Helps fix bug #966.
664 kes Separate batch init error messages. Probably helps fix bug #966.
665 kes Make SD code that contructs attribute insert check string lengths
667 kes If Dir gets an error during inserting attributes, cancel SD.
668 This reduces unnecessary error messages.
670 kes Correct search boolean for getting Volume info
671 ebl Cleanup batch insert code. Probably fixes bug #965.
672 kes Back out one small change to the reservation system (reserving a volume).
673 kes Rework how a Volume is mounted. It is now much more intelligent and
674 will always attempt to use any mounted volume if possible and reduces
675 calls to the Director asking about volumes.
677 kes Turn off some code when batch insert not enabled.
678 kes Edit FD name in connect error messages.
679 kes Rework the reservation system to take into account that the Director
680 might give us a Volume that is different from the current one being
681 used, and to ensure that we don't exceed Maximum Volume Jobs.
682 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
683 fatal error with multiple jobs running'
684 kes Add more debug code in reservation system.
685 kes Implement maxvol-test to check bug #947.
687 kes Add code to handle tray monitor separated from Win32 FD.
688 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
690 kes Add missed return in fixing verify bug -- trunk only.
691 ebl Fix a command parser issue causing a director segfault.
692 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
694 kes Increase the max block size to 4MB fixes bug #957.
695 kes ERABT if user sets min block size > max block size. Fixes bug #956.
696 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
697 is not properly mounted (recognized) during a poll.
698 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
699 Job that has differences reports Verify OK.
700 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
702 ebl Add an option to operate on all pools with update vol parameters.
703 This complete the project 20. Patch from Nigel Stepp.
704 ebl Add history support to bconsole when using readline.
705 Using Ctrl-D to exit doesn't update .bconsole_history
706 kes Modify new volume algorithm to use max MediaId for generating next
707 volume number rather than the count of Volumes. This should essentially
708 eliminate the failure rate if some volumes were deleted. Bug #921.
709 kes Begin implemention of Optimize Job Scheduling.
710 kes Implement restore callback that Dirk and I agreed on for bat
711 restore. This fixes bug #928. Restore of backup of zero files fails.
712 kes Fix SQL Catalog logging which broke with new db_escape_string
715 Release Version 2.2.4
717 kes Fix bacula_cats.def for new db_escape_string().
718 kes Increase size of name string when FD making connection to SD.
719 May fix bug #953. FD->SD connection failure.
721 kes Add code to help Dan debug 2drive-incremental-2disk test.
722 kes Add code to try to fix bug #908.
723 kes Add waits to multiple exit detection code to try to force pid
724 file to always be deleted.
725 kes Restore good dev.tar.gz to rescue set appropriate binary property.
727 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
728 trying to switch drives by checking for blocking before unblocking.
730 kes Cancel storage daemon in all cases where FD reports error. This
731 should fix virtually all cases of bug #920.
732 kes Fix db_escape_string() for MySQL which did not compile.
734 kes Fix error message that was clobbered when Dir tells SD it does not
735 have write permission on Volume. This should fix a minor point
736 in bug #942, but not the main problem.
737 kes Add code to cancel job in SD if FD connection fails. This should
739 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
740 dvl Pass jcr and db into db_escape_string() to enable better escaping
742 kes Fix migration code to get correct Volume name with multiple volumes
743 by skipping |. Fixes bug #936.
744 kes Implement patch supplied by Landon to fix bug #944 where using
745 TLS with bconsole uses 99+% of the CPU.
746 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
748 kes Move patches into patches directory.
750 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
753 ebl Using 'm' in bconsole will show messages like before,
754 and not memory usage.
755 kes Fix bug #935, and probably also bug #903 where files were not
756 restored. MediaId was not properly set in JobMedia record after
759 kes Suppress chown and chmod error messages if the FD is not running
762 kes Apply Martin Simmons' patch that should turn off the new API usage
763 when batch insert is turned off allowing building on older
765 kes Add ./configure search in qwt-qt4 for qwt package
767 kes Bacula is now free of 3rd party GPL copyrighted code!
769 kes Add guid_to_name.c/h which replace idcache.
770 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
772 ebl Detect if new PosgreSQL batch insert API is present.
773 kes Correct incorrect mempool call causing Director crash. Occurs on
774 systems without va_copy().
775 sb Update spec files for 2.2.1 release
777 kes Fix memory pool call in ua_output.c. bug #934.
778 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
779 Add test program to fnmatch.c
781 kes Integrate patch to README.vc8 from
782 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
783 edit it to get it into Unix patch format.
784 kes Implement mkpath.c to replace old FSF makepath.c
786 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
788 Release Version 2.2.1
790 kes Update POTFILES.in
791 kes Cleanup a few underquoted AC_DEFUNs in configure
792 kes Apply patch from Martin Simmons that adds a test for va_copy to
795 kes Fix bug #921 by increasing the number of tries to create a new volume
797 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
798 can be called multiple times. Implement a version for machines
799 without va_copy() that gets a big buffer.
801 kes Integrate more portable zone offset code into bsmtp.c
802 Submitted by Attila Fülöp.
804 kes Fix bad SD->FD return status reported by
805 (James Harper) <james.harper@bendigoit.com.au>
806 ebl Fix a bug in read_close_session which return random status
807 thanks to James Harper
809 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
810 and directory names during restore of single file/directories.
811 kes Add sanity checks to .sql command when string is empty. Hopefully
812 that will resolve Dirks Director crash.
814 kes Apply patch submitted by Martin Simmons that corrects a seg fault
815 in the bsmtp chat subroutine when debug is >= 10.
817 kes Fix Director crash when running bat SQL queries.
818 kes Add David's notes on Item 8: Copy pools.
820 kes Rework projects file to be current and ready for a vote.
821 kes Enhance lex scanner error message.
823 kes Tweak LICENSE file to mention BSD code.
824 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
825 if specified on the ./configure.
826 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
827 This class is intended to allow us to open a second bsock to the
828 Director while in the restore subdialog.
830 kes Fix configure to create bat Makefile before creating dependencies.
831 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
832 kes Add a tooltip to the tray monitor.
833 dvl Set the Director's PID file before dropping privs. This fixes
836 kes Update AUTHORs file
837 kes Increase the default max concurrent jobs to 20 in FD and SD to
838 correspond with the default .conf files.
839 kes Rewrite the Win32 service routines. This eliminates the 3 copies
840 some different, of the same file created by RN when porting the
842 kes Rearrange some of the Win32 directories and the placement of the files
844 kes Set DEVELOPER flag in version.h
846 ========================================================================
847 Release Version 2.2.0
849 kes Apply a second doc patch from Marc.
850 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
851 improves the tips section that discusses how to setup multiple
854 kes Update bat README file.
855 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
856 corrects a typo in the Recycle status check in db_find_next_volume().
857 This will probably fix a number of annoying problems with multiple
859 kes Modify most of dird/msgchan.c to use bsock class calls rather than
860 bnet calls -- no functionality change.
862 kes Modify the Verify output to specify if files are missing on
863 the Volume(s) or disk. Fixes confusion in bug #916.
864 kes When more than one Volume is read in a migration job, the last
865 Volume bytes reported are from the last read volume rather than
866 the last written volume. Fixed. This fixes bug #910.
867 kes Fix display of Recycle flag after update volume=foo recycle=yes.
868 It previously printed New Recyle flag is: no. This fixes bug
871 kes Correct seg fault when switching tape drives during restore.
872 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
873 be used until after 2.2.0 release.
875 kes Remove fnmatch() in SD that permitted wild card specifications.
878 kes Fix %g in filename returned by SQL for browse tree reported by
880 kes Fix configure so that it puts config.out in the cwd rather than
882 kes Attempt to fix the locking problem reported by Eric in bug #906.
883 kes Make berrno class to leave errno unchanged after constructor call.
884 kes Make bnet_server use the heap rather than the stack to allocate
885 its socket fd pointers to avoid a crash at termination. Problem
886 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
888 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
889 and putting it in depkgs-qt along with Qt4.3.
891 kes Rework code in acquire.c that switches drives for reading when
892 the Media Type does not match. This should fix bug #906
894 ebl Fix a director segfault during job setup #907
895 kes Correct seg fault in postgresql when first operation returns no
896 rows. Fixes Dirks File browser problem seg fault with bat.
898 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
899 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
902 kes Implement PopUp YES/NO dialog for bat.
904 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
906 kes Correct RunScript to terminate job in FD on failure.
907 kes Change abort_on_error and AbortJobOnError to fail_on_error
908 and FailJobOnError in RunScripts.
909 kes Minor tweaks of code formating in RunScripts, principally to
910 avoid depassing 80 columns.
912 kes Eliminate one #ifdef Win32 in bsmtp
913 kes Implement grow tool to grow a file for testing very large databases.
914 kes Add big-vol-test to test Bacula seeking with > 5GB.
917 kes Modify find_next_volume() to return all values in Media record.
918 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
922 kes Update Release notes
924 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
925 Warning, in previous beta version, all media get from scratch keep their
928 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
929 This should fix bug #842. Made a note to look at removing the temp
930 files at the end of the install.
931 kes Add ability to mount and unmount a file device providing it is
932 marked as being removable and has the appropriate mount and unmount
933 commands defined in the Device resource. This fixes bug #830.
934 kes When applying a storage override, release all previous storage
935 definitions rather than just prepending the new storage.
936 This should prevent a good deal of confusion.
938 kes Implement ./configure search for qwt libraries.
940 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
941 Win32 FD. This should fix bug #893.
942 kes Remove an unnecessary beep in Win32 init code.
943 kes Update copyright dates in Win32 executable about boxes.
944 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
945 code with a BSD getopt.c and getopt.h.
946 kes Remove sched.h from the Win32 compat directory -- not used.
947 kes Remove the Exit menu item from the Win32 tray monitor. If you really
948 need to shut it down, do it through the services panel or the command
950 kes Remove some inappropriate Bacula FSFE copyrights.
951 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
952 kes Fix regress config non-portable test as pointed out by
953 Florian Heigl <florian.heigl@gmail.com>
954 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
955 as pointed out by Florian Heigl <florian.heigl@gmail.com>
957 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
958 Reported by Frank Sweetser.
962 kes Fix client-only build.
963 kes Integrate client-only fixes for bsys (initgroups) and conio from
964 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
965 kes Make arguments to get_scratch_volume() in same order as other
967 kes Rework the prune_volumes() subroutine so that after purging and
968 no volume found in desired pool, it will check for a scratch
969 volume. This prevents recycling the whole scratch pool.
970 kes Add code to status storage to print boffset_t (largefile support).
972 kes Move qwt (Graphics libarary for Qt4) to depkgs.
973 kes You now need a --with-qwt=<dir> to be able to build bat.
974 kes Update src/win32/cats/bacula_cats.def to include the new
975 db_get_query_dbids() call on Win32.
977 kes Correct a problem when selecting a scratch volume and moving
978 it to another pool that lost some columns.
979 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
980 kes Enhance Autochanger error messages to include Volume and device name.
981 kes Rework prune_volumes() code to take account of InChanger flag,
982 and to handle recycling volumes going to the Scratch pool and
983 current pool because the RecyclePool directive.
984 kes Implement a better and more efficient db_get_query_dbids() to
985 handle creating and passing back a list of DBIds.
989 kes Start work on new more efficient DBId subroutine. First use
990 will be for recycling volume to Scratch inchanger.
991 kes Increase number of JobIds in pruning from 1000 to 10000.
992 This to be replaced by above routine.
993 kes Begin implementation of building Qt4 on Win32.
994 kes Correct typo in fix I added for bad TLS shutdown.
995 kes Pull 2.0.3 patches into patches directory.
996 kes Update Release notes. Include qt-console in line count.
997 kes Update Projects file.
999 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1000 bug in migration code where a job that spanned two volumes
1003 kes Implement new BST_DESPOOLING blocked state. Change from locking
1004 during despooling in SD to blocking. This means that other threads
1005 can work with the device structure, in particular the reservations
1006 system while despooling.
1008 kes Fix return in reservation message queue that missed clearing
1009 the jcr lock (implemented 26Jun07 below).
1010 kes Rename a number of dev methods to make locking function names
1012 kes Document locking in lock.c. Move lock structures to new file
1015 kes Move reservations message lock to lock jcr only this
1017 kes Move main SD locking code into lock.c (new file).
1018 kes Update Win32 build to include lock.c
1022 kes Dirk committed the qwt library code for drawing graphs in bat.
1023 kes Tweak install of qwt so that it is integrated with ./configure.
1025 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1026 out by Eric (my typo).
1027 ebl Fix configure.in to get batch mode enable
1028 kes Return correct string from authenticate.cpp in bat when connecting
1030 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1031 spurious line drops when using TLS.
1032 kes Do not file reparse points when restoring a file that already
1035 kes Implement Windows reparse points -- similar to directories, but
1036 we do not descend into it. This is a first cut. They seem to
1037 be backed up, but restore is not yet tested.
1038 kes Remove restore_blocking in tls code when shutting a socket to leave
1039 it in blocking mode. Hopefully this will fix the encryption bug
1040 reported by Frank Sweetser.
1041 kes When opening a file for backup, tell the OS that we are going to
1042 read it sequentially -- optimization.
1043 kes Change variable names in authenticate_director() to not conflict
1044 with member names in bat. Caused great confusion with compiler,
1047 kes Queue openssl error messages in case of comm problem.
1048 kes Do shutdown() call if socket terminated.
1049 kes Remove some duplicated code in tls.c
1050 kes Move more of the bsock member variables into private and access
1052 kes Add Frank Sweetser's tls-test to the regression suite.
1054 kes Add Swedish sv.po file
1056 kes Don't print clock skew message in FD if less than 3 seconds diff.
1057 kes Add a bit of VSS info to status client.
1058 kes Implement a first cut of Vista VSS, using Win2003 code.
1060 Release: 2.1.20 beta
1062 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1063 loaded tape but uses first drive).
1064 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1065 This was indeed a Win32 issue.
1067 kes Simplify search of autochanger for in-use Volume.
1068 kes Fix exit condition of check for in-use volume. kes Remove
1069 inappropriate my_postgresql_free_result() in db_close()
1071 kes Fix bad return in FD when encryption signature not found.
1072 Probably caused a crash.
1073 kes Inhibit missing encryption signature error messages for
1074 file types where no signature computed.
1075 kes Correct inverted check on autochanger in reservation system.
1076 kes Tweak debug code in autochanger reservation.
1078 kes Add some additional locking in the cats directory in subroutines
1079 that modify packet variables called from batch insert.
1080 kes Rework how dcrs are allocated. new_dcr() can now be called
1081 with an existing pointer, and it will simply clean it up.
1082 This allows the reservation system to test various different
1083 devices, and will permit easy device changes.
1084 kes A bunch of changes all over to handle new new_dcr() calling
1086 kes Work more on the Volume management in the SD. Remember Volumes
1087 for tape drives and for autochangers (even virtual disk changers).
1088 kes When looking at the Volume list to reserve a drive, handle
1089 autochanger names correctly by interating through the changer
1090 devices. Also call the Director to see if a Volume is suitable
1091 for the current job.
1092 kes Fix some bugs in bscan. Make sure all media records are written.
1093 Make sure that valid JobMedia records are written for disk files.
1094 Previously they were completely wrong.
1095 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1096 that the URLs don't change and so that the developers will all
1097 work off the same copy. Rebuild from scrach.
1098 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1100 Release: 2.1.18 beta
1102 kes Fix seg fault in FD from incorrect digest size.
1103 kes Fix argument to non-OpenSSL crypto.c subroutine.
1105 Release: 2.1.16 beta
1107 kes Remove a few malloc()s from the encryption code.
1108 kes Use the class calls to bsock in filed/backup.c and restore.c in
1109 place of the old bnet_xxx code.
1110 kes Implement code that does an on the fly calculation of the
1111 signing digest during restore of encrypted files. It makes
1112 a best guess at the algorithm, and if it is not correct, will
1113 then revert to the old code which reads the file after it is
1115 kes Implement at least one missing crypto stream in stream_to_ascii()
1116 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1117 #877 where a reload with bad syntax causes Dir to exit.
1119 Cut: 2.1.14 beta (not released)
1121 kes Do not free a volume on a tape drive until another volume is
1122 mounted and read, or the autochanger unloads the volume.
1123 This should help the SD re-use volumes that are already mounted,
1124 and should fix bug #886.
1125 kes Apply patch from user brettedgar that allows gnome2-console include
1126 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1127 kes Apply patch from Lucien Weller that fixes day of week calculation
1128 because of DST flag problem. Fixes bug #887.
1130 kes Move find_next_appendable_volume() to after acquiring a valid device
1131 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1133 kes Unable to reproduce bug 872. However added additional testing for
1135 kes Bug #874 resolved by documenting SQLite limitations.
1136 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1137 kes Bug #881 resolved by removing typo in mtx-changer script.
1138 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1139 approval. Added a link to the wiki on the web page, and implemented
1140 a backup from http://paramount.ind.wpi.edu
1142 kes Fix update allfrompool to pass pool name.
1144 kes Convert to pure GPL v2 license.
1145 kes Fix sscanf problems reported by Peter Buschman that caused
1146 a bus error on Solaris.
1147 kes Rework (simplify) the select prompt in bat.
1148 kes Move get_jobid_from_tid() into lib and create a
1150 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1151 should definitely fix the problem of lost error messages in the
1153 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1154 kes Eliminate tcpd.h from the project. Enclose the #include from the
1155 library with extern C ...
1156 kes Add print of signal name when a signal is trapped.
1158 Release: 2.1.12 beta
1160 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1162 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1163 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1164 makes SQLit3 run 30 times faster, though a bit less safe.
1165 kes Implement --with-batch-insert in configure and detection of thread
1166 safe libraries. It is on by default, but turned off if no thread
1167 safe library (e.g. SQLite 2) is available.
1169 kes Fix Bacula PostgreSQL buffer overruns.
1170 kes Do better checking for NULL results returned from PostgreSQL;
1171 implement retry for failed queries; clear results buffer after
1172 failed query. Hopefully this will correct the PostgreSQL failures.
1174 kes Implement algorithm to handle only one appendable volume with
1175 Prefer Mounted Volumes = no.
1176 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1177 returned from a query.
1178 kes Make volume lock recursive.
1179 kes Implement an additional volume reservation algorithm that
1180 starts by considering all reserved volumes then uses the
1181 old brute force algorithm of searching the resources to
1182 find a suitable device.
1183 kes Add new reservations debug code and refine the old code.
1184 kes Update the win32/dll/bacula.defs file.
1186 kes Tweak reservations algorithm to permit a few more cases, i.e.
1187 volume reserved, but on different drive, ...
1188 kes Enhance SD status to include Pool and Media Type for drive in a
1189 more readable format (a bit longer).
1190 kes Fix PostgreSQL double free.
1192 kes Minor refactoring of restore decryption code.
1193 kes Add code to smartall.c to detect double free of a buffer.
1195 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1196 so that bsmtp will create a correct email address (mailbox only).
1197 kes Modify 'memory' command so that the buffers are listed as 'In use'
1198 to avoid confusion with Orphaned buffers.
1199 kes I reworked the OpenSSL include/lib flags to be handled in
1200 the standard Bacula way, which should fix bug #863 concerning
1201 non-standard OpenSSL libraries.
1203 kes Implement Help Browser window for bat.
1204 kes Fix reload bug that reset StorageId to zero.
1206 kes Fix TLS #ifdefing when TLS turned off.
1207 kes Ensure that when labelling a tape with Slot=0 that InChanger
1209 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1211 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1212 add DISTINCT (required by PostgreSQL).
1213 kes Implement BSOCK authenticate_director() method. Eventually will
1214 authenicate all daemons.
1215 kes Move several more functions into the BSOCK class.
1217 kes Add code to tell the OS that we no longer need a cached
1218 file that we were reading. In findlib/bfile.c. Also,
1219 only cache files that we are reading. Thanks to
1220 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1221 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1222 kes Implement script to automatically generate cats and dll .def
1223 files for Win32 dll.
1224 kes Update README.mingw32 to include new .def file generation.
1225 kes Correct typo in UTF-8 error message as reported by:
1226 jhernandez <julianhernandez@gmail.com>
1227 kes Add additional sm_check() code on debug level 1.
1228 kes Set default debug level to 1.
1229 kes Trap SIGABRT in attempt to get traceback.
1231 kes Reduce bat connect timeout from 30 to 15 seconds.
1232 kes More restructuring and implementing BSOCK class in place of
1234 kes Remove a few unnecessary malloc() tests in crypto code.
1235 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1236 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1237 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1239 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1241 kes Fix Verify InitCatalog. The attributes were not pointing to the
1242 correct saved location.
1243 kes Implement message callback so that GUI is sure to get all
1244 daemon messages. Currently displayed in a dialog in bat.
1245 kes Ignore SIGUSR2 (Bacula timer) in bat.
1246 kes Apply regress patch from bug #859 to allow regress to work
1247 with Solaris compiler.
1249 kes Begin adding TLS support to bat.
1250 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1251 clean up lex.c and make it more readable.
1253 kes Move more bnet functions into the BSOCK class.
1254 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1255 kes Complete change of berrno strerror() method to bstrerror()
1257 Release: 2.1.10 beta
1259 kes Cleanup incorrect email addresses in bsmtp.
1260 kes Make bat display initial messages rather than discard them.
1262 kes First cut of adding .mod to the run command.
1263 kes Implement auto display of messages in bat.
1264 kes Enhanced preferences to allow all Bacula output to be
1267 kes Try to make bsmtp date routines more generic.
1268 kes Fixed bug #856 autochanger documentation.
1269 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1270 kes Add new cats entry point so Win32 builds.
1272 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1274 kes Do better checking for the MySQL 64 bit libraries looking for both
1275 .a and .so libraries.
1276 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1277 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1278 kes Require the thread safe version of MySQL during configure. Thanks
1279 to Andre Noll for pointing this out.
1280 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1281 continuing in migration code.
1282 kes Apply implementation of tray-monitor font derived from gnome-console
1283 submitted by Andreas Piesk <a.piesk@gmx.net>
1285 kes Eliminate important memory loss in SQLite
1286 kes Fixed the batch insert MySQL thread specific data that was not
1287 being freed. See cats/mysql.c:db_thread_cleanup().
1288 kes Fix restore before command.
1289 kes Convert old hdr.name to name() in a few places.
1290 kes Implement update jobid command.
1291 kes Return all time_t dates in db_get_job_record()
1292 kes Stop watchdog in SD earlier.
1293 kes Put Pool just after Storage in please mount message.
1294 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1297 kes Update the po files.
1298 kes Fix Verify InitCatalog by making it cache attributes.
1300 kes Change name bacula-bat to bat for man 1 page to correspond to
1302 kes Check for client and store NULL pointers in status command. This
1304 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1305 kes Fix sign extended editing of %p.
1306 kes Clean out a little old #ifdefing in cats/mysql.c
1308 kes If time diff between DIR and FD is more than 600 seconds convert
1309 INFO message to WARNING.
1310 kes Implement heap size display in status for all daemons.
1311 kes Attempt to fix MySQL db open memory loss (not successfull).
1312 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1313 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1314 Query. This looks like a MySQL but but by doing extra releases,
1315 the memory goes away. This should fix bug #847.
1317 kes When backup fails, cancel SD before waiting for sd termination.
1318 kes If SD is waiting for FD to connect during cancel, wake up the
1320 kes Fix fsf code so that errno is correctly reported.
1321 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1323 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1324 so that Bacula doesn't later stumble into a seg fault.
1325 kes Use the term Restore Client in the restore Job report.
1326 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1327 the original job's FileSetId.
1328 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1329 spooling in migration jobs. Not yet tested.
1330 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1331 reading conf file from a pipe. However, do it with open_bpipe()
1332 rather than popen. Not yet tested.
1334 kes Fix an ugly bug where the VolCatBytes were getting updated
1336 kes Implement bconsole memory command that prints current memory
1337 usage, plus smartalloc dump.
1338 kes Clarify some error messages in backup, admin, and migrate.
1339 kes Shrink label dialog to smaller size.
1340 kes Invert Cancel OK buttons on restore to be OK Cancel.
1341 kes More strerror() to bstrerror() conversions.
1343 kes Start implementing bstrerror() in place of strerror().
1344 kes Stripping path -- seems to work.
1346 kes Prevent door and port files from being restored (mostly
1348 kes Free an unreleased buffer in compat code.
1349 kes Change console Job name from *Console* to -Console- to eliminate
1350 Win32 filename problems. Put Win32 path separator when creating
1351 Console file. This fixes bug #846.
1352 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1354 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1356 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1357 to force Win32 error message.
1359 kes First cut strip path. The data should be passed to the FD,
1360 but nothing is done with it yet.
1361 kes Enhance the digest and signature routines in the crypto
1362 library to accept a JCR and to use it to print error messages
1363 so that they will go in the Job report rather than the daemon's
1365 kes Simplify some of the verify signature code.
1366 kes Simplify a few of the alternative returns in the signature
1369 ebl Use only POSIX regex instead of GNU regex in breg.c for
1370 File relocation. It fix broken freebsd compilation.
1371 kes Convert all other Dir files to use new ua class message
1373 kes Tentative fix for missing digest signature in bug 807.
1374 kes Correct handle problem in new win32_ftruncate routine.
1375 kes Convert ua_purge.c and ua_update.c to use new ua class
1376 message routines for bat.
1378 kes Correct incorrect installation of LICENSE in Win32 installer.
1379 kes Display LICENSE at the beginning of the Win32 install.
1380 kes Attempt to correct the need for the png files to be installed
1382 kes Reapply my bat.conf install script in qt-console. I think I
1383 editted bat.pro instead of bat.pro.in and it was lost.
1384 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1385 the /var/lock/subsys for subsysdir. Also corrects typos in the
1388 kes First cut update job.
1389 kes Correct configure to include qmake of src/qt-console directory.
1391 kes Make restore job yes/mod/no print in one command so GUI works.
1392 kes First cut implementing backup and restore client.
1393 kes Correct editing in Verify output that caused a seg fault.
1395 kes Insure that bat.conf is not overwritten during installation.
1396 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1397 while I was implementing migration in March 2006 !
1399 ebl Cleanup file relocation, using char *RegexWhere instead of
1400 char *where + bool where_use_regexp
1401 kes Update some manpages and add bat manpage.
1402 kes Make a first cut at converting bacula.spec.in for bwx-console
1404 kes Apply patch from John Goerzen to add hostname as fourth argument
1405 to make_catalog_backup script.
1406 kes Fix typos I introduced into bsmtp.c
1407 kes Make pm_strxxx() routines handle input of NULL pointer. This
1408 is to protect from NULL pointers returned from SQL databases.
1409 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1410 kes Add more debug to FIFO code -- fix fifo regression test.
1412 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1413 kes Add thread timer to bnet_connect() to break from OS if wait time
1416 kes Update Win32 build to include new files, new symbols, and
1418 kes Implement socket level heartbeat (tcp_keepidle)
1419 ebl Commit File relocation patch
1420 kes Make bat have 'make install' target.
1421 kes Warn during install if old gnome-console binary found.
1422 kes Warn during install if old wx-console binary found.
1423 kes Add -8 option to bsmtp command line to add content type utf-8.
1424 Fixes bug #809. (Character coding problem in bsmtp).
1425 kes If < is found in target (from, to, cc) then do not enclose the
1426 target in < > in bsmtp. Fixes bug #772 (malformed address).
1427 kes When printing certain items in dbcheck, stop after 300000.
1428 Fixes bug #822. (dbcheck loops).
1429 kes Incorrect status in Dir after waiting for mount with poll set.
1432 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1434 kes Print waiting to reserve a device every 5 mins.
1436 kes Don't call close_part in label.c if tape and relabel.
1437 kes Don't free volume if busy in close() -- should help with
1439 ebl Fix #824 RunScript bug (After script could be execute twice)
1440 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1441 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1442 Add a regression script to test RunScript
1444 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1447 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1448 deprecated. No additional bugs will be fixed, and they will be dropped
1449 in a future release (probably 2.4.0).
1450 kes Change name of wx-console to bwx-console to make it more Bacula
1452 kes Change the name of gnome-console to bgnome-console to make it
1455 kes Some time in March, a Feature Request with patch from Jorj Bauer
1456 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1458 The ability for the director to validate a Client (FD) CN against
1459 an arbitrary set of patterns rather than the hostname, with
1460 A new 'TLS Allowed CN' set of directives which are implemented
1461 in the Client resource. Then pattern matching is used in place
1462 of hostname matching against the Certificate's CN. As an example, we
1463 have certificates which (a) use a local CA, and (b) have a CN of the
1465 kes Add new/changed entry points to Win32 build
1466 kes Create unaccepted-projects for projects that are not accepted.
1467 kes Simplify locking in the reservations system.
1468 kes Add more debug code in reservations.
1469 kes Make sure error condition on reserving a volume is handled correctly.
1470 kes Correct handling of volume_in_use.
1471 kes Correct handling of initializing a device.
1472 kes Move handling of broadcasting releasing a device into release_device().
1473 kes Correct attaching dcr to dev so that it is only done if device
1474 is properly initiated.
1476 kes Locking debug level tweaks in SD.
1477 kes Tweak new Volume code.
1479 kes Add exec external-command [wait-seconds] to bconsole. This
1480 executes the external-command. Note! normally external-command
1481 should be enclosed in double quotes.
1482 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1483 it should normally be off in a production system.
1485 kes Implement die command for SD so that we can force it to dump.
1486 kes Implement SD lock debug code.
1487 kes Implement new algorithm for keeping Volume list in SD. It
1488 is now owned by the device.
1490 kes Implement new code for freeing in use volumes that should
1491 resolve if not all, some of the problems of multiple drive
1492 tape conflicts described in bug 801.
1494 kes Fix gui/bacula-web/images files in svn.
1495 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1497 ebl Fix a bug in batch mode (in string escape)
1498 kes Correct migration prune SQL typo that crept in in a
1499 recent 2.1.x change.
1501 kes Move bnet_despool() into class in bsock.c
1502 kes Modify job report to include director name and Build OS.
1503 kes Move drop root privilege and check_catalog() before fork.
1504 kes Add update database scripts (version 9 to 10) to updatedb directory.
1506 ebl Check size and age of each file after its backup to see if
1507 it has changed during backup, if 'checkfilechanges' is set.
1508 The FD will do an extra check (stat(2)) after
1509 each file backup. mtime, ctime and size are compared with
1510 'before backup' information. If time or size mismatch, an
1511 error message will be generated. You must upgrade FD to use it.
1513 kes Make database name and user configurable
1514 --with-db-name=xxx --with-db-user=xxx
1515 kes Add back database type to message.c for debugging.
1517 kes Implement dir_sql() which issues an SQL query.
1518 kes Modify bat medialist to use dir_sql() and do some minor C++
1519 formatting as well as eliminating a number of pointers, simplifing
1522 kes Fix some of the mtx-changer grep commands for tape label readers.
1523 kes Convert a number of bsendmsg into the appropriate send/warning/error
1524 message class calls.
1525 kes Suppress the using database message in the .sql command.
1526 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1528 kes Add context menu for floating a window.
1529 kes Some minor cleanup and name changes in qt-console
1530 kes Add doing mt setblk 0 in Win32 mtx-changer.
1531 kes Apply Martin's bug fix to move definition of ENODATA for
1533 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1534 sqlite2 and sqlite3.
1536 kes More pruning cleanup.
1537 kes Turn on wait_for_drive by default in mtx-changer.
1538 kes Turn on Batch insert code by default as it now passes regression.
1539 kes Add ./configure --enable-bat to enable building of Bat.
1540 No install yet though.
1542 kes Implement a new .sql command for bat.
1543 kes Implement code to turn off pruning in obtaining the next volume.
1544 Pruning is turned off for the status dir command, but turned on
1545 for SD requests and for the list nextvolume command.
1547 kes Correct Qmsg() that was not updated correctly when committing a
1548 previous change (probably the recent TLS patch).
1550 kes Write new subroutine is_volume_purged() that explicitly checks
1551 if the Volume is purged, and if so marks it as such. This should
1552 resolve problems reported about needing to mount twice to recycle
1554 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1555 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1556 amount of duplicated code.
1557 kes Do volume pruning only for the Media Type desired (reduces pruning time
1558 if multiple Media Types are in the same pool).
1559 kes Implement more detailed info in the Job report for the Bacula version
1561 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1563 ebl Add bbatch tool to bench database and insert mode.
1564 Fix sql quote stuff in batch mode
1565 Fix sql stuff for mysql
1567 kes Correct problems with am/pm scheduling. Fixes bug #808.
1568 kes Implement new prunning code that prunes up to 1000 jobs at
1569 the same time. The same technique can be applied to a number
1570 of other prune/purge subroutines.
1571 kes Add an insanity check when starting a new tape job to ensure
1572 that the tape position has not been changed. If so fail the
1574 kes Fix Win32 build for dlls to add the folllowing:
1575 src/lib/bsock.c -- new file with new entry points
1576 src/lib/dlist.c -- new entry points
1577 src/cats/sql_create.c -- new entry point
1578 src/cats/sql_cmds.c -- new DATA item exported
1580 ebl batch mode cleanup bscan-test is ok now.
1581 kes Implement SD code to check length of disk volume before appending.
1583 kes Correct return status on db_batch... routines.
1584 kes Add call to db_write_batch_file_records() to migration code.
1585 ebl Fix AfterJob timing
1586 kes Move the checking of the database in initializion of the Director
1587 to after we drop privileges. This avoids the need for both root
1588 and bacula access to the DB.
1589 kes Correct a misplaced variable definition in src/filed/backup.c
1590 kes Correct how the new batch insert db_create_attributes_record()
1591 uses the arguments. Caused a seg fault in bscan.
1592 kes Implement lock() and unlock() methods in DEVICE class.
1593 Implement block() and set_block(xx) methods in DEVICE class.
1594 kes Modify bnet_connect() so that it uses time() to check for the
1595 wait time expiring (on some OSes, some system calls may not
1596 return immediately).
1597 kes Modify Verify to obtain the previous JobId when it is actually
1598 running rather than at schedule time (as it was in 1.38.x).
1599 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1601 kes When checking pid in pid file, continue running if the pid is
1602 the same as ours. This occurs on IRIX after a system crash.
1605 kes Extend new GUI API.
1606 kes Make the ua structure a class, and implement send_msg(),
1607 error_msg(), warning_msg(), and info_msg().
1609 kes Apply fix from for building wx-console on the Mac from
1611 kes Implement new select mechanism for GUI programs.
1612 kes Reorganize initialization of stackedWidgets in bat.
1614 kes Add updated nagios plugin supplied by Christian Masopust.
1616 kes More bat implementation.
1617 kes File migrate bug with Pool Occupancy using mediaid instead
1618 of jobids. Fixes bug #795.
1619 kes Fix orphaned buffers in filed backup and verify due to
1620 crypto buffers not freed during errors. Fixes bug #789.
1621 kes Extend new GUI api code to tree commands.
1622 kes Ensure that tree and dot commands check console ACLs.
1623 kes Permit marking directory with trailing slash.
1624 kes Allow 20 console connections (instead of only 10).
1626 kes Add smartctl call to bacula-sd.conf as an example of getting
1629 kes Modify jobq.c to let simultaneous restore jobs run. This may
1630 cause them to fail if they cannot get a drive.
1631 kes Add Client Connect Wait to Storage daemon to permit users to
1632 modify the time the SD waits for a FD connection.
1634 kes Correct virtual changer check which was backwards. This caused
1635 volumes to be unloaded into slots already occupied.
1637 kes Apply Command ACL filter to JobId list in restore command.
1638 kes Correct typeo in var.c patch.
1640 kes Don't let Bacula prune File or Job records for the current Job.
1641 kes Fix variable substitution pad + inc bug reported (with patch)
1644 kes Correct SQLite log table index as reported by Luca Berra.
1646 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1648 kes Begin implementing new comm signals for API.
1649 kes Fix a few places in lib/message.c where the open fd may
1651 kes Continue implementing lib/bsock.c (real class). Make jcr,
1652 who, host, and port private. There are new methods to access
1653 them for non-class use. This required touching a number of files.
1655 kes Add LANG=C to autoconf/randpass so it works with languages other
1656 than English. Fixes bug #788.
1658 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1660 You will not be able to generate Include/Exclude list any more.
1661 It will be fixed soon.
1662 If you want to use this, you can apply
1663 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1665 kes Restore of sockets created false error messages because Bacula
1666 no longer restores sockets, but the code was still trying to
1667 set the attributes on a non-existent file. Reported by a user.
1668 ebl finish RecyclePool feature
1669 Media will takes Pool.RecyclePool
1670 when moving from Scratch to a Pool or when user will do
1671 update volume=xxx frompool
1672 To use it, add RecyclePool = aPool to your Pool resource
1675 RecyclePool = Scratch
1679 kes Expand new BSOCK class adding signal() and new BNET signals.
1680 kes Begin enhancing the dot commands adding a new API function
1681 that returns more information and will make it easier
1682 to interface to the Director from a program.
1684 kes Make DEVICE fd private. Its new name is m_fd, and can be
1685 obtained with dev->fd() outside the class. This is the
1686 first of many DEVICE members to be made private.
1687 kes Implement Michael Renner's idea on having a virtual disk
1688 changer. I made some minor modifications (e.g. I did not
1689 implement the Virtual Changer directive, but simply set
1690 the Changer Command to an empty string.
1692 kes Implement a BSOCK send() method that writes the whole record
1693 in a single write() request rather than in two.
1694 ebl add update volume=xxx recyclepool=yyyy
1695 volume takes recyclepool from pool when using update volume=xxx from pool
1697 kes Fix encryption deblocking bug, which caused some restored files
1698 to be truncated. This fixes bug #763.
1699 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1700 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1702 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1703 ebl Use btime_t instead of uint64_t in media patch.
1705 kes Optimize the use of the database a bit in the Status dir command.
1706 Only open it when needed, ensure that if any previous database
1707 was opened, it is closed.
1709 kes Correct VolCatBytes bug from media patch.
1710 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1711 in the case of orphaned records.
1712 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1713 and File records in 300K chunks to be more efficient. This
1714 idea came from Juan Luis Frances (if I remember right).
1715 kes Apply Eric's scratch patch that moves a purged Volume to
1716 the RecyclePool. Question: how is RecyclePool set? what
1717 happens to the ScratchPool?
1718 kes Apply Eric's media patch that collects read/write media
1719 times as well as byte counts. This patch requires a
1720 simultaneous upgrade of the DIR and SD. Note, there
1721 should be some way to turn off timing. I'm not sure
1722 times are in Bacula units.
1723 kes Apply Eric's batch-insert patch.
1725 kes Update projects list.
1727 kes Implement Include/Exclude file lists in FD as dlists using
1728 the new dlistString class. This permits efficiently having
1729 large include/exclude lists and completes project Item 25.
1730 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1731 console is authorized to cancel the job. This fixes bug
1733 kes Modify SD so that the VolCatJobs medium record is updated
1734 at the beginning of a Job rather than the end. This
1735 fixes bug #775 where exceeding MaxVolJobs caused jobs
1737 kes Added a mutex around getting and setting Volume information
1738 so that multiple simultaneous jobs will single thread.
1740 Switch to using Subversion
1741 kes Remove src/pygtk-console/ from configure
1743 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1744 plus the entrypoints.
1745 kes Apply patch supplied that corrects debug print
1746 in canceling jobs for max run time. Supplied as
1747 part of bug #621, which was previously fixed.
1749 kes Test on job_canceled() and sd_msg_thread_done inside
1750 loop starting the message thread to avoid a race condition.
1752 kes Remove rl_catch_signal from console.c as it conflicted
1753 with the header definition. Fixes bug #765.
1754 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1756 kes Clarify some stored/acquire messages to indicate if the
1757 problem is with read or append.
1759 kes Fix memory leak with storage ids in cats/sql_get.c
1760 kes Terminate watchdog earlier to avoid reference to released
1761 memory -- reported by Jason Austin.
1762 kes Move closing the database from jobq.c to the director daemon
1763 termination routine. This fixes memory leaks for shadow jobs
1764 (i.e. migration jobs).
1765 kes Free up the unique jobid chain items in migrate.c. This fixes
1766 a memory leak problem.
1767 kes Convert some ugly looking for statements to use foreach_alist
1768 in findlib/find.c. This will facilitate converting the structures
1769 to use dlist (for large include/exclude lists).
1770 kes Fix a bug in the btree.c and btree.h routines, then rename them
1771 rblist and add them to be built in src/lib. Include some new
1772 methods written by Rudolf Cejka that make the code more readable
1773 (hides some of the ugly casting).
1774 kes Add set_next() and set_prev() methods which make the code much more
1775 readable. Also add a new dlistString class that facilitates storing
1776 strings in dlists. To be used in the large include/exclude lists.
1777 kes Make some trivial modifications to lib/tree.h that use rblist
1778 rather than dlist for storing the tree links. This was suggested
1779 by Rudolf Cejka. The result of this is that the restore tree now
1780 uses red-black binary trees rather than simple linked lists. This
1781 should give rather dramatic speed improvements for directories
1782 contining large numbers of directories/files (more than 10000).
1784 kes Fix maxruntime bug #621.
1786 ebl Implement the include JobID in spool file name project.
1787 kes Reorder projects file in order determined by Jan 2007 vote.
1788 kes Implement item #12 on project list -- quick release of FD by
1790 kes Fix open of SQLite3 db where user does not have write permission
1791 so that DIR does not crash. Fixes bug #761.
1793 kes Add back missing @ in Win32 Makefile.
1794 kes Change 'Device not configured to autolabel' from INFO
1796 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1797 which should restart an indefinite # of times.
1798 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1799 other DIR specifications.
1801 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1802 Fix path quoting in SQLite scripts.
1803 Fix problems with SHGetFolderPath.
1805 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1807 kes Fix Job restart on error bug that promotes an Inc to a Full
1808 backup. This should fix bug #755.
1809 kes Add qt-console and first cut of code.
1813 kes Fix Bacula->Documentation link on Win32 to point to index.html
1814 instead of bacula.html. Fixed bug #750.
1815 kes Return JobId in db_get_job_record() when JobId==0. This should
1817 kes Do not release source pointers when restarting a failed job.
1819 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1820 This *should* fix bug #747.
1821 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1824 kes Modify USTORE constructor to set an empty store_source string,
1825 and don't copy the store_source string in a cancel. Hopefully
1826 this will fix Arno's seg fault, bug #744.
1827 kes Add back code to disable conio in configure. Fixes bug #743.
1828 kes Correct the Options scanner in the FD to correctly handle
1829 SHA1 option, which was eating the next option. Reported by
1831 kes Add code to indicate when the SD is spooling, spool wait, and
1832 despooling as requested by Alan Brown.
1834 Version 2.0.0 released: 4 January 2007