1 Technical notes on version 2.3
5 kes Put some FD auth code on dbglvl rather than fixed.
6 kes Return insert attributes error message in db msg buffer to avoid
8 kes Separate batch init error messages.
9 kes Make SD code that contructs attribute insert check string lengths
11 kes If Dir gets an error during inserting attributes, cancel SD.
12 This reduces unnecessary error messages.
14 kes Correct search boolean for getting Volume info
15 ebl Cleanup batch code.
16 kes Back out one small change to the reservation system (reserving a volume).
17 kes Rework how a Volume is mounted. It is now much more intelligent and
18 will always attempt to use any mounted volume if possible and reduces
19 calls to the Director asking about volumes.
21 kes Turn off some code when batch insert not enabled.
22 kes Edit FD name in connect error messages.
23 kes Rework the reservation system to take into account that the Director
24 might give us a Volume that is different from the current one being
25 used, and to ensure that we don't exceed Maximum Volume Jobs.
26 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
27 fatal error with multiple jobs running'
28 kes Add more debug code in reservation system.
29 kes Implement maxvol-test to check bug #947.
31 kes Add code to handle tray monitor separated from Win32 FD.
32 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
34 kes Add missed return in fixing verify bug -- trunk only.
35 ebl Fix a command parser issue causing a director segfault.
36 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
38 kes Increase the max block size to 4MB fixes bug #957.
39 kes ERABT if user sets min block size > max block size. Fixes bug #956.
40 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
41 is not properly mounted (recognized) during a poll.
42 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
43 Job that has differences reports Verify OK.
44 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
46 ebl Add an option to operate on all pools with update vol parameters.
47 This complete the project 20. Patch from Nigel Stepp.
48 ebl Add history support to bconsole when using readline.
49 Using Ctrl-D to exit doesn't update .bconsole_history
50 kes Modify new volume algorithm to use max MediaId for generating next
51 volume number rather than the count of Volumes. This should essentially
52 eliminate the failure rate if some volumes were deleted. Bug #921.
53 kes Begin implemention of Optimize Job Scheduling.
54 kes Implement restore callback that Dirk and I agreed on for bat
55 restore. This fixes bug #928. Restore of backup of zero files fails.
56 kes Fix SQL Catalog logging which broke with new db_escape_string
59 kes Fix bacula_cats.def for new db_escape_string().
60 kes Increase size of name string when FD making connection to SD.
61 May fix bug #953. FD->SD connection failure.
63 kes Add code to help Dan debug 2drive-incremental-2disk test.
64 kes Add code to try to fix bug #908.
65 kes Add waits to multiple exit detection code to try to force pid
66 file to always be deleted.
67 kes Restore good dev.tar.gz to rescue set appropriate binary property.
69 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
70 trying to switch drives by checking for blocking before unblocking.
72 kes Cancel storage daemon in all cases where FD reports error. This
73 should fix virtually all cases of bug #920.
74 kes Fix db_escape_string() for MySQL which did not compile.
76 kes Fix error message that was clobbered when Dir tells SD it does not
77 have write permission on Volume. This should fix a minor point
78 in bug #942, but not the main problem.
79 kes Add code to cancel job in SD if FD connection fails. This should
81 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
82 dvl Pass jcr and db into db_escape_string() to enable better escaping
84 kes Fix migration code to get correct Volume name with multiple volumes
85 by skipping |. Fixes bug #936.
86 kes Implement patch supplied by Landon to fix bug #944 where using
87 TLS with bconsole uses 99+% of the CPU.
88 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
90 kes Move patches into patches directory.
92 ebl Fix bug #946 about "bacula-dir -t" which doesn't works
95 ebl Using "m" in bconsole will show messages like before,
97 kes Fix bug #935, and probably also bug #903 where files were not
98 restored. MediaId was not properly set in JobMedia record after
101 kes Suppress chown and chmod error messages if the FD is not running
104 kes Apply Martin Simmons' patch that should turn off the new API usage
105 when batch insert is turned off allowing building on older
107 kes Add ./configure search in qwt-qt4 for qwt package
109 kes Bacula is now free of 3rd party GPL copyrighted code!
111 kes Add guid_to_name.c/h which replace idcache.
112 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
114 ebl Detect if new PosgreSQL batch insert API is present.
115 kes Correct incorrect mempool call causing Director crash. Occurs on
116 systems without va_copy().
117 sb Update spec files for 2.2.1 release
119 kes Fix memory pool call in ua_output.c. bug #934.
120 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
121 Add test program to fnmatch.c
123 kes Integrate patch to README.vc8 from
124 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
125 edit it to get it into Unix patch format.
126 kes Implement mkpath.c to replace old FSF makepath.c
128 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
130 Release Version 2.2.1
132 kes Update POTFILES.in
133 kes Cleanup a few underquoted AC_DEFUNs in configure
134 kes Apply patch from Martin Simmons that adds a test for va_copy to
137 kes Fix bug #921 by increasing the number of tries to create a new volume
139 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
140 can be called multiple times. Implement a version for machines
141 without va_copy() that gets a big buffer.
143 kes Integrate more portable zone offset code into bsmtp.c
144 Submitted by Attila Fülöp.
146 kes Fix bad SD->FD return status reported by
147 (James Harper) <james.harper@bendigoit.com.au>
148 ebl Fix a bug in read_close_session which return random status
149 thanks to James Harper
151 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
152 and directory names during restore of single file/directories.
153 kes Add sanity checks to .sql command when string is empty. Hopefully
154 that will resolve Dirks Director crash.
156 kes Apply patch submitted by Martin Simmons that corrects a seg fault
157 in the bsmtp chat subroutine when debug is >= 10.
159 kes Fix Director crash when running bat SQL queries.
160 kes Add David's notes on Item 8: Copy pools.
162 kes Rework projects file to be current and ready for a vote.
163 kes Enhance lex scanner error message.
165 kes Tweak LICENSE file to mention BSD code.
166 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
167 if specified on the ./configure.
168 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
169 This class is intended to allow us to open a second bsock to the
170 Director while in the restore subdialog.
172 kes Fix configure to create bat Makefile before creating dependencies.
173 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
174 kes Add a tooltip to the tray monitor.
175 dvl Set the Director's PID file before dropping privs. This fixes
178 kes Update AUTHORs file
179 kes Increase the default max concurrent jobs to 20 in FD and SD to
180 correspond with the default .conf files.
181 kes Rewrite the Win32 service routines. This eliminates the 3 copies
182 some different, of the same file created by RN when porting the
184 kes Rearrange some of the Win32 directories and the placement of the files
186 kes Set DEVELOPER flag in version.h
188 ========================================================================
189 Release Version 2.2.0
191 kes Apply a second doc patch from Marc.
192 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
193 improves the tips section that discusses how to setup multiple
196 kes Update bat README file.
197 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
198 corrects a typo in the Recycle status check in db_find_next_volume().
199 This will probably fix a number of annoying problems with multiple
201 kes Modify most of dird/msgchan.c to use bsock class calls rather than
202 bnet calls -- no functionality change.
204 kes Modify the Verify output to specify if files are missing on
205 the Volume(s) or disk. Fixes confusion in bug #916.
206 kes When more than one Volume is read in a migration job, the last
207 Volume bytes reported are from the last read volume rather than
208 the last written volume. Fixed. This fixes bug #910.
209 kes Fix display of Recycle flag after update volume=foo recycle=yes.
210 It previously printed New Recyle flag is: no. This fixes bug
213 kes Correct seg fault when switching tape drives during restore.
214 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
215 be used until after 2.2.0 release.
217 kes Remove fnmatch() in SD that permitted wild card specifications.
220 kes Fix %g in filename returned by SQL for browse tree reported by
222 kes Fix configure so that it puts config.out in the cwd rather than
224 kes Attempt to fix the locking problem reported by Eric in bug #906.
225 kes Make berrno class to leave errno unchanged after constructor call.
226 kes Make bnet_server use the heap rather than the stack to allocate
227 its socket fd pointers to avoid a crash at termination. Problem
228 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
230 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
231 and putting it in depkgs-qt along with Qt4.3.
233 kes Rework code in acquire.c that switches drives for reading when
234 the Media Type does not match. This should fix bug #906
236 ebl Fix a director segfault during job setup #907
237 kes Correct seg fault in postgresql when first operation returns no
238 rows. Fixes Dirks File browser problem seg fault with bat.
240 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
241 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
244 kes Implement PopUp YES/NO dialog for bat.
246 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
248 kes Correct RunScript to terminate job in FD on failure.
249 kes Change abort_on_error and AbortJobOnError to fail_on_error
250 and FailJobOnError in RunScripts.
251 kes Minor tweaks of code formating in RunScripts, principally to
252 avoid depassing 80 columns.
254 kes Eliminate one #ifdef Win32 in bsmtp
255 kes Implement grow tool to grow a file for testing very large databases.
256 kes Add big-vol-test to test Bacula seeking with > 5GB.
259 kes Modify find_next_volume() to return all values in Media record.
260 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
264 kes Update Release notes
266 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
267 Warning, in previous beta version, all media get from scratch keep their
270 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
271 This should fix bug #842. Made a note to look at removing the temp
272 files at the end of the install.
273 kes Add ability to mount and unmount a file device providing it is
274 marked as being removable and has the appropriate mount and unmount
275 commands defined in the Device resource. This fixes bug #830.
276 kes When applying a storage override, release all previous storage
277 definitions rather than just prepending the new storage.
278 This should prevent a good deal of confusion.
280 kes Implement ./configure search for qwt libraries.
282 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
283 Win32 FD. This should fix bug #893.
284 kes Remove an unnecessary beep in Win32 init code.
285 kes Update copyright dates in Win32 executable about boxes.
286 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
287 code with a BSD getopt.c and getopt.h.
288 kes Remove sched.h from the Win32 compat directory -- not used.
289 kes Remove the Exit menu item from the Win32 tray monitor. If you really
290 need to shut it down, do it through the services panel or the command
292 kes Remove some inappropriate Bacula FSFE copyrights.
293 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
294 kes Fix regress config non-portable test as pointed out by
295 Florian Heigl <florian.heigl@gmail.com>
296 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
297 as pointed out by Florian Heigl <florian.heigl@gmail.com>
299 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
300 Reported by Frank Sweetser.
304 kes Fix client-only build.
305 kes Integrate client-only fixes for bsys (initgroups) and conio from
306 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
307 kes Make arguments to get_scratch_volume() in same order as other
309 kes Rework the prune_volumes() subroutine so that after purging and
310 no volume found in desired pool, it will check for a scratch
311 volume. This prevents recycling the whole scratch pool.
312 kes Add code to status storage to print boffset_t (largefile support).
314 kes Move qwt (Graphics libarary for Qt4) to depkgs.
315 kes You now need a --with-qwt=<dir> to be able to build bat.
316 kes Update src/win32/cats/bacula_cats.def to include the new
317 db_get_query_dbids() call on Win32.
319 kes Correct a problem when selecting a scratch volume and moving
320 it to another pool that lost some columns.
321 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
322 kes Enhance Autochanger error messages to include Volume and device name.
323 kes Rework prune_volumes() code to take account of InChanger flag,
324 and to handle recycling volumes going to the Scratch pool and
325 current pool because the RecyclePool directive.
326 kes Implement a better and more efficient db_get_query_dbids() to
327 handle creating and passing back a list of DBIds.
331 kes Start work on new more efficient DBId subroutine. First use
332 will be for recycling volume to Scratch inchanger.
333 kes Increase number of JobIds in pruning from 1000 to 10000.
334 This to be replaced by above routine.
335 kes Begin implementation of building Qt4 on Win32.
336 kes Correct typo in fix I added for bad TLS shutdown.
337 kes Pull 2.0.3 patches into patches directory.
338 kes Update Release notes. Include qt-console in line count.
339 kes Update Projects file.
341 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
342 bug in migration code where a job that spanned two volumes
345 kes Implement new BST_DESPOOLING blocked state. Change from locking
346 during despooling in SD to blocking. This means that other threads
347 can work with the device structure, in particular the reservations
348 system while despooling.
350 kes Fix return in reservation message queue that missed clearing
351 the jcr lock (implemented 26Jun07 below).
352 kes Rename a number of dev methods to make locking function names
354 kes Document locking in lock.c. Move lock structures to new file
357 kes Move reservations message lock to lock jcr only this
359 kes Move main SD locking code into lock.c (new file).
360 kes Update Win32 build to include lock.c
364 kes Dirk committed the qwt library code for drawing graphs in bat.
365 kes Tweak install of qwt so that it is integrated with ./configure.
367 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
368 out by Eric (my typo).
369 ebl Fix configure.in to get batch mode enable
370 kes Return correct string from authenticate.cpp in bat when connecting
372 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
373 spurious line drops when using TLS.
374 kes Do not file reparse points when restoring a file that already
377 kes Implement Windows reparse points -- similar to directories, but
378 we do not descend into it. This is a first cut. They seem to
379 be backed up, but restore is not yet tested.
380 kes Remove restore_blocking in tls code when shutting a socket to leave
381 it in blocking mode. Hopefully this will fix the encryption bug
382 reported by Frank Sweetser.
383 kes When opening a file for backup, tell the OS that we are going to
384 read it sequentially -- optimization.
385 kes Change variable names in authenticate_director() to not conflict
386 with member names in bat. Caused great confusion with compiler,
389 kes Queue openssl error messages in case of comm problem.
390 kes Do shutdown() call if socket terminated.
391 kes Remove some duplicated code in tls.c
392 kes Move more of the bsock member variables into private and access
394 kes Add Frank Sweetser's tls-test to the regression suite.
396 kes Add Swedish sv.po file
398 kes Don't print clock skew message in FD if less than 3 seconds diff.
399 kes Add a bit of VSS info to status client.
400 kes Implement a first cut of Vista VSS, using Win2003 code.
404 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
405 loaded tape but uses first drive).
406 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
407 This was indeed a Win32 issue.
409 kes Simplify search of autochanger for in-use Volume.
410 kes Fix exit condition of check for in-use volume. kes Remove
411 inappropriate my_postgresql_free_result() in db_close()
413 kes Fix bad return in FD when encryption signature not found.
414 Probably caused a crash.
415 kes Inhibit missing encryption signature error messages for
416 file types where no signature computed.
417 kes Correct inverted check on autochanger in reservation system.
418 kes Tweak debug code in autochanger reservation.
420 kes Add some additional locking in the cats directory in subroutines
421 that modify packet variables called from batch insert.
422 kes Rework how dcrs are allocated. new_dcr() can now be called
423 with an existing pointer, and it will simply clean it up.
424 This allows the reservation system to test various different
425 devices, and will permit easy device changes.
426 kes A bunch of changes all over to handle new new_dcr() calling
428 kes Work more on the Volume management in the SD. Remember Volumes
429 for tape drives and for autochangers (even virtual disk changers).
430 kes When looking at the Volume list to reserve a drive, handle
431 autochanger names correctly by interating through the changer
432 devices. Also call the Director to see if a Volume is suitable
434 kes Fix some bugs in bscan. Make sure all media records are written.
435 Make sure that valid JobMedia records are written for disk files.
436 Previously they were completely wrong.
437 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
438 that the URLs don't change and so that the developers will all
439 work off the same copy. Rebuild from scrach.
440 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
444 kes Fix seg fault in FD from incorrect digest size.
445 kes Fix argument to non-OpenSSL crypto.c subroutine.
449 kes Remove a few malloc()s from the encryption code.
450 kes Use the class calls to bsock in filed/backup.c and restore.c in
451 place of the old bnet_xxx code.
452 kes Implement code that does an on the fly calculation of the
453 signing digest during restore of encrypted files. It makes
454 a best guess at the algorithm, and if it is not correct, will
455 then revert to the old code which reads the file after it is
457 kes Implement at least one missing crypto stream in stream_to_ascii()
458 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
459 #877 where a reload with bad syntax causes Dir to exit.
461 Cut: 2.1.14 beta (not released)
463 kes Do not free a volume on a tape drive until another volume is
464 mounted and read, or the autochanger unloads the volume.
465 This should help the SD re-use volumes that are already mounted,
466 and should fix bug #886.
467 kes Apply patch from user brettedgar that allows gnome2-console include
468 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
469 kes Apply patch from Lucien Weller that fixes day of week calculation
470 because of DST flag problem. Fixes bug #887.
472 kes Move find_next_appendable_volume() to after acquiring a valid device
473 in reserve.c. This fixes bug #864 -- confirmed by reporter.
475 kes Unable to reproduce bug 872. However added additional testing for
477 kes Bug #874 resolved by documenting SQLite limitations.
478 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
479 kes Bug #881 resolved by removing typo in mtx-changer script.
480 kes Made Frank Sweetser's wiki the official Bacula wiki with his
481 approval. Added a link to the wiki on the web page, and implemented
482 a backup from http://paramount.ind.wpi.edu
484 kes Fix update allfrompool to pass pool name.
486 kes Convert to pure GPL v2 license.
487 kes Fix sscanf problems reported by Peter Buschman that caused
488 a bus error on Solaris.
489 kes Rework (simplify) the select prompt in bat.
490 kes Move get_jobid_from_tid() into lib and create a
492 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
493 should definitely fix the problem of lost error messages in the
495 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
496 kes Eliminate tcpd.h from the project. Enclose the #include from the
497 library with extern C ...
498 kes Add print of signal name when a signal is trapped.
502 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
504 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
505 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
506 makes SQLit3 run 30 times faster, though a bit less safe.
507 kes Implement --with-batch-insert in configure and detection of thread
508 safe libraries. It is on by default, but turned off if no thread
509 safe library (e.g. SQLite 2) is available.
511 kes Fix Bacula PostgreSQL buffer overruns.
512 kes Do better checking for NULL results returned from PostgreSQL;
513 implement retry for failed queries; clear results buffer after
514 failed query. Hopefully this will correct the PostgreSQL failures.
516 kes Implement algorithm to handle only one appendable volume with
517 Prefer Mounted Volumes = no.
518 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
519 returned from a query.
520 kes Make volume lock recursive.
521 kes Implement an additional volume reservation algorithm that
522 starts by considering all reserved volumes then uses the
523 old brute force algorithm of searching the resources to
524 find a suitable device.
525 kes Add new reservations debug code and refine the old code.
526 kes Update the win32/dll/bacula.defs file.
528 kes Tweak reservations algorithm to permit a few more cases, i.e.
529 volume reserved, but on different drive, ...
530 kes Enhance SD status to include Pool and Media Type for drive in a
531 more readable format (a bit longer).
532 kes Fix PostgreSQL double free.
534 kes Minor refactoring of restore decryption code.
535 kes Add code to smartall.c to detect double free of a buffer.
537 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
538 so that bsmtp will create a correct email address (mailbox only).
539 kes Modify 'memory' command so that the buffers are listed as 'In use'
540 to avoid confusion with Orphaned buffers.
541 kes I reworked the OpenSSL include/lib flags to be handled in
542 the standard Bacula way, which should fix bug #863 concerning
543 non-standard OpenSSL libraries.
545 kes Implement Help Browser window for bat.
546 kes Fix reload bug that reset StorageId to zero.
548 kes Fix TLS #ifdefing when TLS turned off.
549 kes Ensure that when labelling a tape with Slot=0 that InChanger
551 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
553 kes Add StartTime to final uar_sel_jobid_temp query so that we can
554 add DISTINCT (required by PostgreSQL).
555 kes Implement BSOCK authenticate_director() method. Eventually will
556 authenicate all daemons.
557 kes Move several more functions into the BSOCK class.
559 kes Add code to tell the OS that we no longer need a cached
560 file that we were reading. In findlib/bfile.c. Also,
561 only cache files that we are reading. Thanks to
562 Tobias Oetiker <tobi@oetiker.ch> for the idea.
563 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
564 kes Implement script to automatically generate cats and dll .def
566 kes Update README.mingw32 to include new .def file generation.
567 kes Correct typo in UTF-8 error message as reported by:
568 jhernandez <julianhernandez@gmail.com>
569 kes Add additional sm_check() code on debug level 1.
570 kes Set default debug level to 1.
571 kes Trap SIGABRT in attempt to get traceback.
573 kes Reduce bat connect timeout from 30 to 15 seconds.
574 kes More restructuring and implementing BSOCK class in place of
576 kes Remove a few unnecessary malloc() tests in crypto code.
577 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
578 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
579 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
581 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
583 kes Fix Verify InitCatalog. The attributes were not pointing to the
584 correct saved location.
585 kes Implement message callback so that GUI is sure to get all
586 daemon messages. Currently displayed in a dialog in bat.
587 kes Ignore SIGUSR2 (Bacula timer) in bat.
588 kes Apply regress patch from bug #859 to allow regress to work
589 with Solaris compiler.
591 kes Begin adding TLS support to bat.
592 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
593 clean up lex.c and make it more readable.
595 kes Move more bnet functions into the BSOCK class.
596 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
597 kes Complete change of berrno strerror() method to bstrerror()
601 kes Cleanup incorrect email addresses in bsmtp.
602 kes Make bat display initial messages rather than discard them.
604 kes First cut of adding .mod to the run command.
605 kes Implement auto display of messages in bat.
606 kes Enhanced preferences to allow all Bacula output to be
609 kes Try to make bsmtp date routines more generic.
610 kes Fixed bug #856 autochanger documentation.
611 kes Rework bsmtp date editing for Win32. This fixes bug #854.
612 kes Add new cats entry point so Win32 builds.
614 kes Attempt to fix bsmtp date editing on OSes without %z editing.
616 kes Do better checking for the MySQL 64 bit libraries looking for both
617 .a and .so libraries.
618 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
619 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
620 kes Require the thread safe version of MySQL during configure. Thanks
621 to Andre Noll for pointing this out.
622 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
623 continuing in migration code.
624 kes Apply implementation of tray-monitor font derived from gnome-console
625 submitted by Andreas Piesk <a.piesk@gmx.net>
627 kes Eliminate important memory loss in SQLite
628 kes Fixed the batch insert MySQL thread specific data that was not
629 being freed. See cats/mysql.c:db_thread_cleanup().
630 kes Fix restore before command.
631 kes Convert old hdr.name to name() in a few places.
632 kes Implement update jobid command.
633 kes Return all time_t dates in db_get_job_record()
634 kes Stop watchdog in SD earlier.
635 kes Put Pool just after Storage in please mount message.
636 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
639 kes Update the po files.
640 kes Fix Verify InitCatalog by making it cache attributes.
642 kes Change name bacula-bat to bat for man 1 page to correspond to
644 kes Check for client and store NULL pointers in status command. This
646 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
647 kes Fix sign extended editing of %p.
648 kes Clean out a little old #ifdefing in cats/mysql.c
650 kes If time diff between DIR and FD is more than 600 seconds convert
651 INFO message to WARNING.
652 kes Implement heap size display in status for all daemons.
653 kes Attempt to fix MySQL db open memory loss (not successfull).
654 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
655 kes Eliminate memory loss in MySQL (possibly other SQLs) during
656 Query. This looks like a MySQL but but by doing extra releases,
657 the memory goes away. This should fix bug #847.
659 kes When backup fails, cancel SD before waiting for sd termination.
660 kes If SD is waiting for FD to connect during cancel, wake up the
662 kes Fix fsf code so that errno is correctly reported.
663 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
665 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
666 so that Bacula doesn't later stumble into a seg fault.
667 kes Use the term Restore Client in the restore Job report.
668 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
669 the original job's FileSetId.
670 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
671 spooling in migration jobs. Not yet tested.
672 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
673 reading conf file from a pipe. However, do it with open_bpipe()
674 rather than popen. Not yet tested.
676 kes Fix an ugly bug where the VolCatBytes were getting updated
678 kes Implement bconsole memory command that prints current memory
679 usage, plus smartalloc dump.
680 kes Clarify some error messages in backup, admin, and migrate.
681 kes Shrink label dialog to smaller size.
682 kes Invert Cancel OK buttons on restore to be OK Cancel.
683 kes More strerror() to bstrerror() conversions.
685 kes Start implementing bstrerror() in place of strerror().
686 kes Stripping path -- seems to work.
688 kes Prevent door and port files from being restored (mostly
690 kes Free an unreleased buffer in compat code.
691 kes Change console Job name from *Console* to -Console- to eliminate
692 Win32 filename problems. Put Win32 path separator when creating
693 Console file. This fixes bug #846.
694 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
696 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
698 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
699 to force Win32 error message.
701 kes First cut strip path. The data should be passed to the FD,
702 but nothing is done with it yet.
703 kes Enhance the digest and signature routines in the crypto
704 library to accept a JCR and to use it to print error messages
705 so that they will go in the Job report rather than the daemon's
707 kes Simplify some of the verify signature code.
708 kes Simplify a few of the alternative returns in the signature
711 ebl Use only POSIX regex instead of GNU regex in breg.c for
712 File relocation. It fix broken freebsd compilation.
713 kes Convert all other Dir files to use new ua class message
715 kes Tentative fix for missing digest signature in bug 807.
716 kes Correct handle problem in new win32_ftruncate routine.
717 kes Convert ua_purge.c and ua_update.c to use new ua class
718 message routines for bat.
720 kes Correct incorrect installation of LICENSE in Win32 installer.
721 kes Display LICENSE at the beginning of the Win32 install.
722 kes Attempt to correct the need for the png files to be installed
724 kes Reapply my bat.conf install script in qt-console. I think I
725 editted bat.pro instead of bat.pro.in and it was lost.
726 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
727 the /var/lock/subsys for subsysdir. Also corrects typos in the
730 kes First cut update job.
731 kes Correct configure to include qmake of src/qt-console directory.
733 kes Make restore job yes/mod/no print in one command so GUI works.
734 kes First cut implementing backup and restore client.
735 kes Correct editing in Verify output that caused a seg fault.
737 kes Insure that bat.conf is not overwritten during installation.
738 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
739 while I was implementing migration in March 2006 !
741 ebl Cleanup file relocation, using char *RegexWhere instead of
742 char *where + bool where_use_regexp
743 kes Update some manpages and add bat manpage.
744 kes Make a first cut at converting bacula.spec.in for bwx-console
746 kes Apply patch from John Goerzen to add hostname as fourth argument
747 to make_catalog_backup script.
748 kes Fix typos I introduced into bsmtp.c
749 kes Make pm_strxxx() routines handle input of NULL pointer. This
750 is to protect from NULL pointers returned from SQL databases.
751 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
752 kes Add more debug to FIFO code -- fix fifo regression test.
754 kes Implement posix_fadvise in FD, and for reading spool files in SD.
755 kes Add thread timer to bnet_connect() to break from OS if wait time
758 kes Update Win32 build to include new files, new symbols, and
760 kes Implement socket level heartbeat (tcp_keepidle)
761 ebl Commit File relocation patch
762 kes Make bat have 'make install' target.
763 kes Warn during install if old gnome-console binary found.
764 kes Warn during install if old wx-console binary found.
765 kes Add -8 option to bsmtp command line to add content type utf-8.
766 Fixes bug #809. (Character coding problem in bsmtp).
767 kes If < is found in target (from, to, cc) then do not enclose the
768 target in < > in bsmtp. Fixes bug #772 (malformed address).
769 kes When printing certain items in dbcheck, stop after 300000.
770 Fixes bug #822. (dbcheck loops).
771 kes Incorrect status in Dir after waiting for mount with poll set.
774 kes Extend idea of Prefer Mounted Volumes to mean a volume about
776 kes Print waiting to reserve a device every 5 mins.
778 kes Don't call close_part in label.c if tape and relabel.
779 kes Don't free volume if busy in close() -- should help with
781 ebl Fix #824 RunScript bug (After script could be execute twice)
782 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
783 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
784 Add a regression script to test RunScript
786 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
789 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
790 deprecated. No additional bugs will be fixed, and they will be dropped
791 in a future release (probably 2.4.0).
792 kes Change name of wx-console to bwx-console to make it more Bacula
794 kes Change the name of gnome-console to bgnome-console to make it
797 kes Some time in March, a Feature Request with patch from Jorj Bauer
798 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
800 The ability for the director to validate a Client (FD) CN against
801 an arbitrary set of patterns rather than the hostname, with
802 A new 'TLS Allowed CN' set of directives which are implemented
803 in the Client resource. Then pattern matching is used in place
804 of hostname matching against the Certificate's CN. As an example, we
805 have certificates which (a) use a local CA, and (b) have a CN of the
807 kes Add new/changed entry points to Win32 build
808 kes Create unaccepted-projects for projects that are not accepted.
809 kes Simplify locking in the reservations system.
810 kes Add more debug code in reservations.
811 kes Make sure error condition on reserving a volume is handled correctly.
812 kes Correct handling of volume_in_use.
813 kes Correct handling of initializing a device.
814 kes Move handling of broadcasting releasing a device into release_device().
815 kes Correct attaching dcr to dev so that it is only done if device
816 is properly initiated.
818 kes Locking debug level tweaks in SD.
819 kes Tweak new Volume code.
821 kes Add exec external-command [wait-seconds] to bconsole. This
822 executes the external-command. Note! normally external-command
823 should be enclosed in double quotes.
824 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
825 it should normally be off in a production system.
827 kes Implement die command for SD so that we can force it to dump.
828 kes Implement SD lock debug code.
829 kes Implement new algorithm for keeping Volume list in SD. It
830 is now owned by the device.
832 kes Implement new code for freeing in use volumes that should
833 resolve if not all, some of the problems of multiple drive
834 tape conflicts described in bug 801.
836 kes Fix gui/bacula-web/images files in svn.
837 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
839 ebl Fix a bug in batch mode (in string escape)
840 kes Correct migration prune SQL typo that crept in in a
843 kes Move bnet_despool() into class in bsock.c
844 kes Modify job report to include director name and Build OS.
845 kes Move drop root privilege and check_catalog() before fork.
846 kes Add update database scripts (version 9 to 10) to updatedb directory.
848 ebl Check size and age of each file after its backup to see if
849 it has changed during backup, if 'checkfilechanges' is set.
850 The FD will do an extra check (stat(2)) after
851 each file backup. mtime, ctime and size are compared with
852 'before backup' information. If time or size mismatch, an
853 error message will be generated. You must upgrade FD to use it.
855 kes Make database name and user configurable
856 --with-db-name=xxx --with-db-user=xxx
857 kes Add back database type to message.c for debugging.
859 kes Implement dir_sql() which issues an SQL query.
860 kes Modify bat medialist to use dir_sql() and do some minor C++
861 formatting as well as eliminating a number of pointers, simplifing
864 kes Fix some of the mtx-changer grep commands for tape label readers.
865 kes Convert a number of bsendmsg into the appropriate send/warning/error
867 kes Suppress the using database message in the .sql command.
868 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
870 kes Add context menu for floating a window.
871 kes Some minor cleanup and name changes in qt-console
872 kes Add doing mt setblk 0 in Win32 mtx-changer.
873 kes Apply Martin's bug fix to move definition of ENODATA for
875 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
878 kes More pruning cleanup.
879 kes Turn on wait_for_drive by default in mtx-changer.
880 kes Turn on Batch insert code by default as it now passes regression.
881 kes Add ./configure --enable-bat to enable building of Bat.
882 No install yet though.
884 kes Implement a new .sql command for bat.
885 kes Implement code to turn off pruning in obtaining the next volume.
886 Pruning is turned off for the status dir command, but turned on
887 for SD requests and for the list nextvolume command.
889 kes Correct Qmsg() that was not updated correctly when committing a
890 previous change (probably the recent TLS patch).
892 kes Write new subroutine is_volume_purged() that explicitly checks
893 if the Volume is purged, and if so marks it as such. This should
894 resolve problems reported about needing to mount twice to recycle
896 kes Rewrite pruning algorithm to do more work in the SQL engine, and
897 to pass a list of JobIds to be deleted to SQL. Also, minimize the
898 amount of duplicated code.
899 kes Do volume pruning only for the Media Type desired (reduces pruning time
900 if multiple Media Types are in the same pool).
901 kes Implement more detailed info in the Job report for the Bacula version
903 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
905 ebl Add bbatch tool to bench database and insert mode.
906 Fix sql quote stuff in batch mode
907 Fix sql stuff for mysql
909 kes Correct problems with am/pm scheduling. Fixes bug #808.
910 kes Implement new prunning code that prunes up to 1000 jobs at
911 the same time. The same technique can be applied to a number
912 of other prune/purge subroutines.
913 kes Add an insanity check when starting a new tape job to ensure
914 that the tape position has not been changed. If so fail the
916 kes Fix Win32 build for dlls to add the folllowing:
917 src/lib/bsock.c -- new file with new entry points
918 src/lib/dlist.c -- new entry points
919 src/cats/sql_create.c -- new entry point
920 src/cats/sql_cmds.c -- new DATA item exported
922 ebl batch mode cleanup bscan-test is ok now.
923 kes Implement SD code to check length of disk volume before appending.
925 kes Correct return status on db_batch... routines.
926 kes Add call to db_write_batch_file_records() to migration code.
927 ebl Fix AfterJob timing
928 kes Move the checking of the database in initializion of the Director
929 to after we drop privileges. This avoids the need for both root
930 and bacula access to the DB.
931 kes Correct a misplaced variable definition in src/filed/backup.c
932 kes Correct how the new batch insert db_create_attributes_record()
933 uses the arguments. Caused a seg fault in bscan.
934 kes Implement lock() and unlock() methods in DEVICE class.
935 Implement block() and set_block(xx) methods in DEVICE class.
936 kes Modify bnet_connect() so that it uses time() to check for the
937 wait time expiring (on some OSes, some system calls may not
939 kes Modify Verify to obtain the previous JobId when it is actually
940 running rather than at schedule time (as it was in 1.38.x).
941 kes Fix src/job.c to handle MaxWaitTime correctly. This should
943 kes When checking pid in pid file, continue running if the pid is
944 the same as ours. This occurs on IRIX after a system crash.
947 kes Extend new GUI API.
948 kes Make the ua structure a class, and implement send_msg(),
949 error_msg(), warning_msg(), and info_msg().
951 kes Apply fix from for building wx-console on the Mac from
953 kes Implement new select mechanism for GUI programs.
954 kes Reorganize initialization of stackedWidgets in bat.
956 kes Add updated nagios plugin supplied by Christian Masopust.
958 kes More bat implementation.
959 kes File migrate bug with Pool Occupancy using mediaid instead
960 of jobids. Fixes bug #795.
961 kes Fix orphaned buffers in filed backup and verify due to
962 crypto buffers not freed during errors. Fixes bug #789.
963 kes Extend new GUI api code to tree commands.
964 kes Ensure that tree and dot commands check console ACLs.
965 kes Permit marking directory with trailing slash.
966 kes Allow 20 console connections (instead of only 10).
968 kes Add smartctl call to bacula-sd.conf as an example of getting
971 kes Modify jobq.c to let simultaneous restore jobs run. This may
972 cause them to fail if they cannot get a drive.
973 kes Add Client Connect Wait to Storage daemon to permit users to
974 modify the time the SD waits for a FD connection.
976 kes Correct virtual changer check which was backwards. This caused
977 volumes to be unloaded into slots already occupied.
979 kes Apply Command ACL filter to JobId list in restore command.
980 kes Correct typeo in var.c patch.
982 kes Don't let Bacula prune File or Job records for the current Job.
983 kes Fix variable substitution pad + inc bug reported (with patch)
986 kes Correct SQLite log table index as reported by Luca Berra.
988 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
990 kes Begin implementing new comm signals for API.
991 kes Fix a few places in lib/message.c where the open fd may
993 kes Continue implementing lib/bsock.c (real class). Make jcr,
994 who, host, and port private. There are new methods to access
995 them for non-class use. This required touching a number of files.
997 kes Add LANG=C to autoconf/randpass so it works with languages other
998 than English. Fixes bug #788.
1000 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1002 You will not be able to generate Include/Exclude list any more.
1003 It will be fixed soon.
1004 If you want to use this, you can apply
1005 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1007 kes Restore of sockets created false error messages because Bacula
1008 no longer restores sockets, but the code was still trying to
1009 set the attributes on a non-existent file. Reported by a user.
1010 ebl finish RecyclePool feature
1011 Media will takes Pool.RecyclePool
1012 when moving from Scratch to a Pool or when user will do
1013 update volume=xxx frompool
1014 To use it, add RecyclePool = aPool to your Pool resource
1017 RecyclePool = Scratch
1021 kes Expand new BSOCK class adding signal() and new BNET signals.
1022 kes Begin enhancing the dot commands adding a new API function
1023 that returns more information and will make it easier
1024 to interface to the Director from a program.
1026 kes Make DEVICE fd private. Its new name is m_fd, and can be
1027 obtained with dev->fd() outside the class. This is the
1028 first of many DEVICE members to be made private.
1029 kes Implement Michael Renner's idea on having a virtual disk
1030 changer. I made some minor modifications (e.g. I did not
1031 implement the Virtual Changer directive, but simply set
1032 the Changer Command to an empty string.
1034 kes Implement a BSOCK send() method that writes the whole record
1035 in a single write() request rather than in two.
1036 ebl add update volume=xxx recyclepool=yyyy
1037 volume takes recyclepool from pool when using update volume=xxx from pool
1039 kes Fix encryption deblocking bug, which caused some restored files
1040 to be truncated. This fixes bug #763.
1041 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1042 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1044 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1045 ebl Use btime_t instead of uint64_t in media patch.
1047 kes Optimize the use of the database a bit in the Status dir command.
1048 Only open it when needed, ensure that if any previous database
1049 was opened, it is closed.
1051 kes Correct VolCatBytes bug from media patch.
1052 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1053 in the case of orphaned records.
1054 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1055 and File records in 300K chunks to be more efficient. This
1056 idea came from Juan Luis Frances (if I remember right).
1057 kes Apply Eric's scratch patch that moves a purged Volume to
1058 the RecyclePool. Question: how is RecyclePool set? what
1059 happens to the ScratchPool?
1060 kes Apply Eric's media patch that collects read/write media
1061 times as well as byte counts. This patch requires a
1062 simultaneous upgrade of the DIR and SD. Note, there
1063 should be some way to turn off timing. I'm not sure
1064 times are in Bacula units.
1065 kes Apply Eric's batch-insert patch.
1067 kes Update projects list.
1069 kes Implement Include/Exclude file lists in FD as dlists using
1070 the new dlistString class. This permits efficiently having
1071 large include/exclude lists and completes project Item 25.
1072 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1073 console is authorized to cancel the job. This fixes bug
1075 kes Modify SD so that the VolCatJobs medium record is updated
1076 at the beginning of a Job rather than the end. This
1077 fixes bug #775 where exceeding MaxVolJobs caused jobs
1079 kes Added a mutex around getting and setting Volume information
1080 so that multiple simultaneous jobs will single thread.
1082 Switch to using Subversion
1083 kes Remove src/pygtk-console/ from configure
1085 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1086 plus the entrypoints.
1087 kes Apply patch supplied that corrects debug print
1088 in canceling jobs for max run time. Supplied as
1089 part of bug #621, which was previously fixed.
1091 kes Test on job_canceled() and sd_msg_thread_done inside
1092 loop starting the message thread to avoid a race condition.
1094 kes Remove rl_catch_signal from console.c as it conflicted
1095 with the header definition. Fixes bug #765.
1096 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1098 kes Clarify some stored/acquire messages to indicate if the
1099 problem is with read or append.
1101 kes Fix memory leak with storage ids in cats/sql_get.c
1102 kes Terminate watchdog earlier to avoid reference to released
1103 memory -- reported by Jason Austin.
1104 kes Move closing the database from jobq.c to the director daemon
1105 termination routine. This fixes memory leaks for shadow jobs
1106 (i.e. migration jobs).
1107 kes Free up the unique jobid chain items in migrate.c. This fixes
1108 a memory leak problem.
1109 kes Convert some ugly looking for statements to use foreach_alist
1110 in findlib/find.c. This will facilitate converting the structures
1111 to use dlist (for large include/exclude lists).
1112 kes Fix a bug in the btree.c and btree.h routines, then rename them
1113 rblist and add them to be built in src/lib. Include some new
1114 methods written by Rudolf Cejka that make the code more readable
1115 (hides some of the ugly casting).
1116 kes Add set_next() and set_prev() methods which make the code much more
1117 readable. Also add a new dlistString class that facilitates storing
1118 strings in dlists. To be used in the large include/exclude lists.
1119 kes Make some trivial modifications to lib/tree.h that use rblist
1120 rather than dlist for storing the tree links. This was suggested
1121 by Rudolf Cejka. The result of this is that the restore tree now
1122 uses red-black binary trees rather than simple linked lists. This
1123 should give rather dramatic speed improvements for directories
1124 contining large numbers of directories/files (more than 10000).
1126 kes Fix maxruntime bug #621.
1128 ebl Implement the include JobID in spool file name project.
1129 kes Reorder projects file in order determined by Jan 2007 vote.
1130 kes Implement item #12 on project list -- quick release of FD by
1132 kes Fix open of SQLite3 db where user does not have write permission
1133 so that DIR does not crash. Fixes bug #761.
1135 kes Add back missing @ in Win32 Makefile.
1136 kes Change 'Device not configured to autolabel' from INFO
1138 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1139 which should restart an indefinite # of times.
1140 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1141 other DIR specifications.
1143 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1144 Fix path quoting in SQLite scripts.
1145 Fix problems with SHGetFolderPath.
1147 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1149 kes Fix Job restart on error bug that promotes an Inc to a Full
1150 backup. This should fix bug #755.
1151 kes Add qt-console and first cut of code.
1155 kes Fix Bacula->Documentation link on Win32 to point to index.html
1156 instead of bacula.html. Fixed bug #750.
1157 kes Return JobId in db_get_job_record() when JobId==0. This should
1159 kes Do not release source pointers when restarting a failed job.
1161 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1162 This *should* fix bug #747.
1163 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1166 kes Modify USTORE constructor to set an empty store_source string,
1167 and don't copy the store_source string in a cancel. Hopefully
1168 this will fix Arno's seg fault, bug #744.
1169 kes Add back code to disable conio in configure. Fixes bug #743.
1170 kes Correct the Options scanner in the FD to correctly handle
1171 SHA1 option, which was eating the next option. Reported by
1173 kes Add code to indicate when the SD is spooling, spool wait, and
1174 despooling as requested by Alan Brown.
1176 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob