1 Technical notes on version 2.3
5 kes Implement first cut of Copy Job.
6 kes Implement Catalog in Pool resource. It overrides catalog specified
7 in the Client resource.
9 kes Apply patch (with some difficulties) from Joao Henrique Freitas
10 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
12 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
13 ftruncate() actually works. In the case of some (cheap) NAS devices,
14 it does not, and so recycling NAS Volumes does not work. The code
15 simply unlink()s the file, then recreates it. This fixes bug #1011.
17 kes First incomplete cut of big malloc blocks for htable.
18 kes Tweak plugin code.
20 kes Plugin debug code + tweak a couple bat dialog layouts
22 kes Apply Max Full Age patch submitted by Scott Bailey
23 <scott dot bailey at eds dot com>
25 kes Fix creating first JobMedia record during Migration to include
26 proper index. This caused slow restores of migrated jobs.
27 kes Temp fix to plugin name file_index.
28 kes Bacula backed up and restored a MySQL database.
30 kes Implement plugin restore.
31 kes Implement parsing of db_driver to give db_type index.
33 kes First cut of plugin restore code.
34 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
35 and do not strip paths on symbolic links.
36 kes Set catalog backup database and user name from values specified on
38 ebl Fix #1031 about wrong pool source information in job report.
41 kes Remove a redundant jcr argument to find_files, match_files, and
43 kes Implement '.status dir header|scheduled|running|terminated' that
44 prints the requested status section. With the exception of the
45 header, the other reports have fields separated by tabs (\t).
47 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
48 a resource embedded run command to find a since time if no explicit
49 since time was supplied on the command line.
50 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
51 that updates the state file at job termination time in addition to
52 when the daemon terminates.
54 kes First version where a plugin did a backup.
55 bpipe-fd.so created a backup file, wrote a test
56 string to it, and Bacua could restore this fabricated file.
58 kes Implement DB Driver = string for the DBI driver.
59 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
60 kes First cut of code for loading Win32 plugin dlls. Implement
61 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
62 and implement a dlfcn.h file based on opengroup's definitions of
65 kes First cut plugin directives.
67 kes Apply patch from bug #1049 to prevent stripping the path on a
69 kes Attempt to fix bug #1047 where stripping a path corrupts the
70 heap. Waiting for feedback.
71 kes Correct the Mount message not to suggest labeling a new tape
72 when doing a restore. Submitted by email by John Stoffel.
73 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
74 FD by using casting. Reported in bug #1042.
76 kes A bit of crypto cleanup. More later.
80 kes Apply patch from Martin to correct bug #1040, bscan sets existing
82 kes Fixed important spelling error in doc -- bug #1045.
84 ebl Fix bextract to be able to extract non-portable Win32 data to
86 kes Move initialization of read/write res lock earlier in the code.
87 This fixes the crash with a null conf file. This fixes bug
89 kes Redefine CURES in lib/parse_conf to be URES and move it all
90 into lib/parse_conf.c -- this responds to bug #1042, but does
91 not fix it. The fix is not to compile with FORTIFY_SOURCE.
92 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
93 the trunk SVN. I don't think this was reported as a bug.
95 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
97 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
99 kes Add DataDespooling and DataCommitting status (committing is
100 the last despooling).
101 kes Finish implementation of new reservations code noted below.
103 kes Fix bsnprintf for float point numbers. I broke recently when
104 parameterizing some variables. This fixes bug #1036.
105 kes Undo recent reservations changes ... will apply them later
106 when they work better.
108 ebl Fixes #1034 which cause mysql to hang the connection after 8h
109 ebl Change default statistics target of filename.name and path.path
110 fields for PostgreSQL. This speeds lookup by indexes. Thanks
112 kes A few more tweaks to new reservation code. Make sure to clear
113 vol released flag when retaking volume. When reading label and
114 label is bad mark volume unused. When recycling, mark volume
115 unused so it can be renamed.
117 kes Fix reserve_volume() so it doesn't release a volume in use
118 (i.e. a volume entry not marked released). This should be
119 the last part needed to fix bug #1018.
121 kes Move Heartbeat documentation from Job to Director resource.
122 This fixes bug #1033.
124 kes Fix existing switch drive SD code to call autochanger to release
125 any old volume. This must be done to keep the autochanger from
126 releasing subsequently newly reserved volumes in doing a close().
127 This should fix bug #1018.
128 kes Fail if attempting to get console input in batch mode. This
129 should help fail RunScript console commands that are incomplete.
130 kes First cut implementing switch_drive() in SD (not actually called).
132 kes Implement first cut running console commands in a RunScript.
134 ebl Fixes bug #1028 where 'Selection Type' option was not usable
136 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
139 Release Version 2.2.7
141 kes Add new free_tls() entry point so that Win32 builds.
142 kes Fix compile warning in src/lib/util.c
143 kes Fix entry point for edit_job_codes() so that Win32 builds.
144 kes Fix seg fault Frank Sweetser reports in regression testing
145 on his systems. The problem was that the original author of
146 bsnprintf.c did not take into account the side effects of
147 using ++x in the argument to a #define.
148 kes Make SD protocol backward compatible with version 2.2.x.
150 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
151 because Bacula no longer restores sockets.
152 ebl Always use ignorecase fileset option on win32 FD.
154 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
155 that implements double quoting include names in conf files,
156 and also allows piping input by having the first character
157 be a vertical bar (|).
158 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
159 that implement %f in RunScripts to pass the FileSet name.
160 kes Skip leading | when lex input comes from a pipe as suggested
161 by Michael Stapelberg <michael@stapelberg.de>.
163 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
164 Nerijus Baliunas <nerijus@users.sourceforge.net>
166 kes Implement Plugin Directory and plugin events.
168 kes Implement a security enhancement: TLS authentication but no
169 encryption. Enabled by setting 'TLS Authentication = yes'.
170 Note when this is on, TLS encryption is turned OFF!
172 kes This patch corrects a problem where the maximum concurrent storage
173 jobs counter gets out of sync during restore jobs causing jobs to
174 'wait on max Storage jobs'. This patch fixes bug #1009.
176 kes This patch fixes bcopy so that it produces correct Volumes.
178 kes This patch eliminates spurious output to the console during a VerifyVolume
179 job that contains encrypted data. It fixes bug #1024.
181 kes This patch prevents the 'status dir' command from trying to use a scratch
182 volume and possibly moving it from one pool to another. This patch fixes
185 kes Add new include to postgresql.c suggested by Marc Cousins so
186 that it compiles correctly with pgre version 8.3.
188 kes Fix --archivedir addition to configure. Replace it with
189 --with-archivedir in configure.in This fixes the regression
191 kes This patch fixes bug #1012 where the job is canceled because
192 of Max Run Time exceeded when the job has not yet started.
194 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
195 one 'part' to write. Instead of each part being stored on disk,
196 written to DVD, then deleted from disk, all parts are written to disk,
197 and only the last is written and deleted from disk.
198 kes This patch fixes the status command to include the formating string for
199 JS_AttrInsterting. It fixes bug #1021.
200 kes This patch should fix the Mac OS X build problem on the latest
201 Darwin, where sys/types.h was not included correctly (apparently
202 due to a change in the Mac headers). The solution was to explicitly
203 ensure that it is defined for the ./configure.
204 This patch also has a rebuild of configure that includes the Debian
205 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
206 kes This patch should ensure that queued messages to the console are
207 displayed as soon as possible. It should fix bug 1007, but has been
208 reported not to work.
210 kes This patch fixes the infinite loop when trying to increase the
211 maximum number of volumes in a Pool during the add command.
212 This patch fixes bug #1008.
214 Release Version 2.2.6
216 db Remove extra data on estimate command in joblist for bat.
218 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
219 really change anything, but is the beginning of doing it *right*.
220 To do it completely right the LastWritten date must be passed to
221 the SD, but it is not yet done.
222 kes Minor tweaks to some bat restore SQL.
223 kes This patch fixes bug #1003 where putting the message output from
224 a Verify job into the catalog results in a recursive loop. The problem
225 seems to show up only with postgresql (to be verified).
226 kes Correct %x to %p in postgresql debug statement.
228 kes Fix bug #942 where lots of emails where generated when the heartbeat
229 interval was low and Bacula wanted a different tape from the one in
232 ebl Add new SD despooling attributes and Dir inserting attributes
233 job status codes in the catalog (Status table).
235 ebl Use qmake-qt4 instead of qmake when available (debian system).
237 kes Add a security warning to src/cats/make_catalog_backup.in indicating
238 that passing the password via the command line (arg 3) is insecure.
239 This responds to bug #990 (it doesn't fix it).
241 kes Set default debug_level to zero. This corrects bugs #991 and #993.
242 kes Fix a crash in bat when it cannot connect to the Director for example
243 if the Director is not running.
244 kes Remove redundant INDEX (JobId) from File table in the trunk.
246 kes Make explicit exception to GPL in LICENSE to permit linking
247 the Win32 FD with Microsoft VSS code.
248 kes Apply the Solaris package patch from
249 Masopust, Christian <christian.masopust@siemens.com>
250 kes Apply the patch to optionally add a timestamp in the debug output
251 submitted by Mariusz Czulada <manieq@wp.eu>.
253 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
254 backend (sql_strerror). Fixes bug #989
256 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
257 It applied with no problems.
258 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
260 kes Redirect stderror to stdin on mt status command in mtx-changer.in
261 since the status is returned on stderr on Solaris.
262 kes Activate Close button on tray-monitor window. This fixes
264 kes Check for NULL item in parse_conf.c before calling it. In the
265 case of Device, there is no item and this caused a seg fault when
266 Device appears in the conf file.
267 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
268 avoids pulling in config.h multiple times in some new code.
270 kes Fix spurious warning message printed when creating a volume with
271 a LabelFormat. This fixes bug #976.
273 Release Version 2.2.5
275 kes Add JobId in place of Job name in all the Jmsg() output.
276 kes Correct the APP_DESC for the Win32 storage service (remove an e).
278 kes Make maxvol-test and new more strict maxvol2-test work.
279 kes Print JobId in all Jmsg() job output.
281 kes Add new SD despooling attributes and Dir inserting attributes
282 job status codes. This fixes bug 961.
283 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
285 kes Fix doc issue. This fixes bug #963.
286 kes Fix listing performance problems in bat. Pointed out by
288 kes Remove old debug code.
289 kes Fix bat code that tests for Win32. This should fix bug #968
290 kes Query 5 list wrong Vol after migration. This fixes bug #960
292 ebl Fix #969 where user can't change Replace option in restore menu.
294 kes Save jcr in thread specific data (tsd) for each thread.
295 kes Make Dmsg() print JobId as -%u.
296 kes Make Jmsg, Emsg, and others automatically pickup the jobid
297 for the thread if it exists.
298 kes Remove old reservation debug jid code.
299 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
300 ebl Add an option that permit to specify spool size in job
301 definition. (Applying patches/testing/spoolsize_per_job.patch).
302 You must upgrade SD and DIR at the same time.
303 dvl Add new configuration item --archivedir
304 dvl Adjust regression tests to use tmp not /tmp. This will allow
305 multiple concurrent runs of the regression tests.
307 kes Fix race condition that drops final block written to volume.
308 This happens in rare cases with multiple simultaneous jobs
309 when the Volume fills. This fixes bug #964. May be related
310 to bug #935 and possibly #903.
311 kes Eliminate more strerror() and replace with bstrerror().
312 kes Remove BSD getopt and replace with unrestricted IBM version.
313 kes Fix Win32 build for changed calling sequences.
314 kes More tweaks to the mount volume routines to get everything
315 right. Changed variable name from find to have_vol, which is
316 much easier to understand.
317 kes Enhance btimer debug code.
319 kes Fix FD->SD authorization failure, which was due to spurious
320 wakeups from a pthread_cond_timedwait(). Simply check the
321 predicate before continuing. This fixes bug #953.
322 kes Add const char where needed (more to do). Remove temp debug code.
324 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
325 kes Don't overwrite error message in check_tables_version.
327 kes Unlock batch insert tables with same calls used elsewhere.
328 kes Allow starting 59 jobs a second.
329 kes Make SD session key more random.
330 kes Add retry for SQLite opening db if it fails. Probably helps
332 kes Suppress extra error messages during batch insert failure.
334 kes Add jcr to timer packets so if killed message can be sent to job.
335 kes Add JobId to all Dmsg() output.
336 kes Put some FD auth code on dbglvl rather than fixed.
337 kes Return insert attributes error message in db msg buffer to avoid
338 false error messages. Helps fix bug #966.
339 kes Separate batch init error messages. Probably helps fix bug #966.
340 kes Make SD code that contructs attribute insert check string lengths
342 kes If Dir gets an error during inserting attributes, cancel SD.
343 This reduces unnecessary error messages.
345 kes Correct search boolean for getting Volume info
346 ebl Cleanup batch insert code. Probably fixes bug #965.
347 kes Back out one small change to the reservation system (reserving a volume).
348 kes Rework how a Volume is mounted. It is now much more intelligent and
349 will always attempt to use any mounted volume if possible and reduces
350 calls to the Director asking about volumes.
352 kes Turn off some code when batch insert not enabled.
353 kes Edit FD name in connect error messages.
354 kes Rework the reservation system to take into account that the Director
355 might give us a Volume that is different from the current one being
356 used, and to ensure that we don't exceed Maximum Volume Jobs.
357 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
358 fatal error with multiple jobs running'
359 kes Add more debug code in reservation system.
360 kes Implement maxvol-test to check bug #947.
362 kes Add code to handle tray monitor separated from Win32 FD.
363 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
365 kes Add missed return in fixing verify bug -- trunk only.
366 ebl Fix a command parser issue causing a director segfault.
367 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
369 kes Increase the max block size to 4MB fixes bug #957.
370 kes ERABT if user sets min block size > max block size. Fixes bug #956.
371 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
372 is not properly mounted (recognized) during a poll.
373 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
374 Job that has differences reports Verify OK.
375 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
377 ebl Add an option to operate on all pools with update vol parameters.
378 This complete the project 20. Patch from Nigel Stepp.
379 ebl Add history support to bconsole when using readline.
380 Using Ctrl-D to exit doesn't update .bconsole_history
381 kes Modify new volume algorithm to use max MediaId for generating next
382 volume number rather than the count of Volumes. This should essentially
383 eliminate the failure rate if some volumes were deleted. Bug #921.
384 kes Begin implemention of Optimize Job Scheduling.
385 kes Implement restore callback that Dirk and I agreed on for bat
386 restore. This fixes bug #928. Restore of backup of zero files fails.
387 kes Fix SQL Catalog logging which broke with new db_escape_string
390 Release Version 2.2.4
392 kes Fix bacula_cats.def for new db_escape_string().
393 kes Increase size of name string when FD making connection to SD.
394 May fix bug #953. FD->SD connection failure.
396 kes Add code to help Dan debug 2drive-incremental-2disk test.
397 kes Add code to try to fix bug #908.
398 kes Add waits to multiple exit detection code to try to force pid
399 file to always be deleted.
400 kes Restore good dev.tar.gz to rescue set appropriate binary property.
402 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
403 trying to switch drives by checking for blocking before unblocking.
405 kes Cancel storage daemon in all cases where FD reports error. This
406 should fix virtually all cases of bug #920.
407 kes Fix db_escape_string() for MySQL which did not compile.
409 kes Fix error message that was clobbered when Dir tells SD it does not
410 have write permission on Volume. This should fix a minor point
411 in bug #942, but not the main problem.
412 kes Add code to cancel job in SD if FD connection fails. This should
414 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
415 dvl Pass jcr and db into db_escape_string() to enable better escaping
417 kes Fix migration code to get correct Volume name with multiple volumes
418 by skipping |. Fixes bug #936.
419 kes Implement patch supplied by Landon to fix bug #944 where using
420 TLS with bconsole uses 99+% of the CPU.
421 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
423 kes Move patches into patches directory.
425 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
428 ebl Using 'm' in bconsole will show messages like before,
429 and not memory usage.
430 kes Fix bug #935, and probably also bug #903 where files were not
431 restored. MediaId was not properly set in JobMedia record after
434 kes Suppress chown and chmod error messages if the FD is not running
437 kes Apply Martin Simmons' patch that should turn off the new API usage
438 when batch insert is turned off allowing building on older
440 kes Add ./configure search in qwt-qt4 for qwt package
442 kes Bacula is now free of 3rd party GPL copyrighted code!
444 kes Add guid_to_name.c/h which replace idcache.
445 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
447 ebl Detect if new PosgreSQL batch insert API is present.
448 kes Correct incorrect mempool call causing Director crash. Occurs on
449 systems without va_copy().
450 sb Update spec files for 2.2.1 release
452 kes Fix memory pool call in ua_output.c. bug #934.
453 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
454 Add test program to fnmatch.c
456 kes Integrate patch to README.vc8 from
457 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
458 edit it to get it into Unix patch format.
459 kes Implement mkpath.c to replace old FSF makepath.c
461 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
463 Release Version 2.2.1
465 kes Update POTFILES.in
466 kes Cleanup a few underquoted AC_DEFUNs in configure
467 kes Apply patch from Martin Simmons that adds a test for va_copy to
470 kes Fix bug #921 by increasing the number of tries to create a new volume
472 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
473 can be called multiple times. Implement a version for machines
474 without va_copy() that gets a big buffer.
476 kes Integrate more portable zone offset code into bsmtp.c
477 Submitted by Attila Fülöp.
479 kes Fix bad SD->FD return status reported by
480 (James Harper) <james.harper@bendigoit.com.au>
481 ebl Fix a bug in read_close_session which return random status
482 thanks to James Harper
484 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
485 and directory names during restore of single file/directories.
486 kes Add sanity checks to .sql command when string is empty. Hopefully
487 that will resolve Dirks Director crash.
489 kes Apply patch submitted by Martin Simmons that corrects a seg fault
490 in the bsmtp chat subroutine when debug is >= 10.
492 kes Fix Director crash when running bat SQL queries.
493 kes Add David's notes on Item 8: Copy pools.
495 kes Rework projects file to be current and ready for a vote.
496 kes Enhance lex scanner error message.
498 kes Tweak LICENSE file to mention BSD code.
499 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
500 if specified on the ./configure.
501 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
502 This class is intended to allow us to open a second bsock to the
503 Director while in the restore subdialog.
505 kes Fix configure to create bat Makefile before creating dependencies.
506 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
507 kes Add a tooltip to the tray monitor.
508 dvl Set the Director's PID file before dropping privs. This fixes
511 kes Update AUTHORs file
512 kes Increase the default max concurrent jobs to 20 in FD and SD to
513 correspond with the default .conf files.
514 kes Rewrite the Win32 service routines. This eliminates the 3 copies
515 some different, of the same file created by RN when porting the
517 kes Rearrange some of the Win32 directories and the placement of the files
519 kes Set DEVELOPER flag in version.h
521 ========================================================================
522 Release Version 2.2.0
524 kes Apply a second doc patch from Marc.
525 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
526 improves the tips section that discusses how to setup multiple
529 kes Update bat README file.
530 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
531 corrects a typo in the Recycle status check in db_find_next_volume().
532 This will probably fix a number of annoying problems with multiple
534 kes Modify most of dird/msgchan.c to use bsock class calls rather than
535 bnet calls -- no functionality change.
537 kes Modify the Verify output to specify if files are missing on
538 the Volume(s) or disk. Fixes confusion in bug #916.
539 kes When more than one Volume is read in a migration job, the last
540 Volume bytes reported are from the last read volume rather than
541 the last written volume. Fixed. This fixes bug #910.
542 kes Fix display of Recycle flag after update volume=foo recycle=yes.
543 It previously printed New Recyle flag is: no. This fixes bug
546 kes Correct seg fault when switching tape drives during restore.
547 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
548 be used until after 2.2.0 release.
550 kes Remove fnmatch() in SD that permitted wild card specifications.
553 kes Fix %g in filename returned by SQL for browse tree reported by
555 kes Fix configure so that it puts config.out in the cwd rather than
557 kes Attempt to fix the locking problem reported by Eric in bug #906.
558 kes Make berrno class to leave errno unchanged after constructor call.
559 kes Make bnet_server use the heap rather than the stack to allocate
560 its socket fd pointers to avoid a crash at termination. Problem
561 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
563 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
564 and putting it in depkgs-qt along with Qt4.3.
566 kes Rework code in acquire.c that switches drives for reading when
567 the Media Type does not match. This should fix bug #906
569 ebl Fix a director segfault during job setup #907
570 kes Correct seg fault in postgresql when first operation returns no
571 rows. Fixes Dirks File browser problem seg fault with bat.
573 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
574 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
577 kes Implement PopUp YES/NO dialog for bat.
579 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
581 kes Correct RunScript to terminate job in FD on failure.
582 kes Change abort_on_error and AbortJobOnError to fail_on_error
583 and FailJobOnError in RunScripts.
584 kes Minor tweaks of code formating in RunScripts, principally to
585 avoid depassing 80 columns.
587 kes Eliminate one #ifdef Win32 in bsmtp
588 kes Implement grow tool to grow a file for testing very large databases.
589 kes Add big-vol-test to test Bacula seeking with > 5GB.
592 kes Modify find_next_volume() to return all values in Media record.
593 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
597 kes Update Release notes
599 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
600 Warning, in previous beta version, all media get from scratch keep their
603 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
604 This should fix bug #842. Made a note to look at removing the temp
605 files at the end of the install.
606 kes Add ability to mount and unmount a file device providing it is
607 marked as being removable and has the appropriate mount and unmount
608 commands defined in the Device resource. This fixes bug #830.
609 kes When applying a storage override, release all previous storage
610 definitions rather than just prepending the new storage.
611 This should prevent a good deal of confusion.
613 kes Implement ./configure search for qwt libraries.
615 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
616 Win32 FD. This should fix bug #893.
617 kes Remove an unnecessary beep in Win32 init code.
618 kes Update copyright dates in Win32 executable about boxes.
619 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
620 code with a BSD getopt.c and getopt.h.
621 kes Remove sched.h from the Win32 compat directory -- not used.
622 kes Remove the Exit menu item from the Win32 tray monitor. If you really
623 need to shut it down, do it through the services panel or the command
625 kes Remove some inappropriate Bacula FSFE copyrights.
626 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
627 kes Fix regress config non-portable test as pointed out by
628 Florian Heigl <florian.heigl@gmail.com>
629 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
630 as pointed out by Florian Heigl <florian.heigl@gmail.com>
632 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
633 Reported by Frank Sweetser.
637 kes Fix client-only build.
638 kes Integrate client-only fixes for bsys (initgroups) and conio from
639 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
640 kes Make arguments to get_scratch_volume() in same order as other
642 kes Rework the prune_volumes() subroutine so that after purging and
643 no volume found in desired pool, it will check for a scratch
644 volume. This prevents recycling the whole scratch pool.
645 kes Add code to status storage to print boffset_t (largefile support).
647 kes Move qwt (Graphics libarary for Qt4) to depkgs.
648 kes You now need a --with-qwt=<dir> to be able to build bat.
649 kes Update src/win32/cats/bacula_cats.def to include the new
650 db_get_query_dbids() call on Win32.
652 kes Correct a problem when selecting a scratch volume and moving
653 it to another pool that lost some columns.
654 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
655 kes Enhance Autochanger error messages to include Volume and device name.
656 kes Rework prune_volumes() code to take account of InChanger flag,
657 and to handle recycling volumes going to the Scratch pool and
658 current pool because the RecyclePool directive.
659 kes Implement a better and more efficient db_get_query_dbids() to
660 handle creating and passing back a list of DBIds.
664 kes Start work on new more efficient DBId subroutine. First use
665 will be for recycling volume to Scratch inchanger.
666 kes Increase number of JobIds in pruning from 1000 to 10000.
667 This to be replaced by above routine.
668 kes Begin implementation of building Qt4 on Win32.
669 kes Correct typo in fix I added for bad TLS shutdown.
670 kes Pull 2.0.3 patches into patches directory.
671 kes Update Release notes. Include qt-console in line count.
672 kes Update Projects file.
674 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
675 bug in migration code where a job that spanned two volumes
678 kes Implement new BST_DESPOOLING blocked state. Change from locking
679 during despooling in SD to blocking. This means that other threads
680 can work with the device structure, in particular the reservations
681 system while despooling.
683 kes Fix return in reservation message queue that missed clearing
684 the jcr lock (implemented 26Jun07 below).
685 kes Rename a number of dev methods to make locking function names
687 kes Document locking in lock.c. Move lock structures to new file
690 kes Move reservations message lock to lock jcr only this
692 kes Move main SD locking code into lock.c (new file).
693 kes Update Win32 build to include lock.c
697 kes Dirk committed the qwt library code for drawing graphs in bat.
698 kes Tweak install of qwt so that it is integrated with ./configure.
700 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
701 out by Eric (my typo).
702 ebl Fix configure.in to get batch mode enable
703 kes Return correct string from authenticate.cpp in bat when connecting
705 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
706 spurious line drops when using TLS.
707 kes Do not file reparse points when restoring a file that already
710 kes Implement Windows reparse points -- similar to directories, but
711 we do not descend into it. This is a first cut. They seem to
712 be backed up, but restore is not yet tested.
713 kes Remove restore_blocking in tls code when shutting a socket to leave
714 it in blocking mode. Hopefully this will fix the encryption bug
715 reported by Frank Sweetser.
716 kes When opening a file for backup, tell the OS that we are going to
717 read it sequentially -- optimization.
718 kes Change variable names in authenticate_director() to not conflict
719 with member names in bat. Caused great confusion with compiler,
722 kes Queue openssl error messages in case of comm problem.
723 kes Do shutdown() call if socket terminated.
724 kes Remove some duplicated code in tls.c
725 kes Move more of the bsock member variables into private and access
727 kes Add Frank Sweetser's tls-test to the regression suite.
729 kes Add Swedish sv.po file
731 kes Don't print clock skew message in FD if less than 3 seconds diff.
732 kes Add a bit of VSS info to status client.
733 kes Implement a first cut of Vista VSS, using Win2003 code.
737 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
738 loaded tape but uses first drive).
739 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
740 This was indeed a Win32 issue.
742 kes Simplify search of autochanger for in-use Volume.
743 kes Fix exit condition of check for in-use volume. kes Remove
744 inappropriate my_postgresql_free_result() in db_close()
746 kes Fix bad return in FD when encryption signature not found.
747 Probably caused a crash.
748 kes Inhibit missing encryption signature error messages for
749 file types where no signature computed.
750 kes Correct inverted check on autochanger in reservation system.
751 kes Tweak debug code in autochanger reservation.
753 kes Add some additional locking in the cats directory in subroutines
754 that modify packet variables called from batch insert.
755 kes Rework how dcrs are allocated. new_dcr() can now be called
756 with an existing pointer, and it will simply clean it up.
757 This allows the reservation system to test various different
758 devices, and will permit easy device changes.
759 kes A bunch of changes all over to handle new new_dcr() calling
761 kes Work more on the Volume management in the SD. Remember Volumes
762 for tape drives and for autochangers (even virtual disk changers).
763 kes When looking at the Volume list to reserve a drive, handle
764 autochanger names correctly by interating through the changer
765 devices. Also call the Director to see if a Volume is suitable
767 kes Fix some bugs in bscan. Make sure all media records are written.
768 Make sure that valid JobMedia records are written for disk files.
769 Previously they were completely wrong.
770 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
771 that the URLs don't change and so that the developers will all
772 work off the same copy. Rebuild from scrach.
773 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
777 kes Fix seg fault in FD from incorrect digest size.
778 kes Fix argument to non-OpenSSL crypto.c subroutine.
782 kes Remove a few malloc()s from the encryption code.
783 kes Use the class calls to bsock in filed/backup.c and restore.c in
784 place of the old bnet_xxx code.
785 kes Implement code that does an on the fly calculation of the
786 signing digest during restore of encrypted files. It makes
787 a best guess at the algorithm, and if it is not correct, will
788 then revert to the old code which reads the file after it is
790 kes Implement at least one missing crypto stream in stream_to_ascii()
791 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
792 #877 where a reload with bad syntax causes Dir to exit.
794 Cut: 2.1.14 beta (not released)
796 kes Do not free a volume on a tape drive until another volume is
797 mounted and read, or the autochanger unloads the volume.
798 This should help the SD re-use volumes that are already mounted,
799 and should fix bug #886.
800 kes Apply patch from user brettedgar that allows gnome2-console include
801 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
802 kes Apply patch from Lucien Weller that fixes day of week calculation
803 because of DST flag problem. Fixes bug #887.
805 kes Move find_next_appendable_volume() to after acquiring a valid device
806 in reserve.c. This fixes bug #864 -- confirmed by reporter.
808 kes Unable to reproduce bug 872. However added additional testing for
810 kes Bug #874 resolved by documenting SQLite limitations.
811 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
812 kes Bug #881 resolved by removing typo in mtx-changer script.
813 kes Made Frank Sweetser's wiki the official Bacula wiki with his
814 approval. Added a link to the wiki on the web page, and implemented
815 a backup from http://paramount.ind.wpi.edu
817 kes Fix update allfrompool to pass pool name.
819 kes Convert to pure GPL v2 license.
820 kes Fix sscanf problems reported by Peter Buschman that caused
821 a bus error on Solaris.
822 kes Rework (simplify) the select prompt in bat.
823 kes Move get_jobid_from_tid() into lib and create a
825 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
826 should definitely fix the problem of lost error messages in the
828 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
829 kes Eliminate tcpd.h from the project. Enclose the #include from the
830 library with extern C ...
831 kes Add print of signal name when a signal is trapped.
835 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
837 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
838 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
839 makes SQLit3 run 30 times faster, though a bit less safe.
840 kes Implement --with-batch-insert in configure and detection of thread
841 safe libraries. It is on by default, but turned off if no thread
842 safe library (e.g. SQLite 2) is available.
844 kes Fix Bacula PostgreSQL buffer overruns.
845 kes Do better checking for NULL results returned from PostgreSQL;
846 implement retry for failed queries; clear results buffer after
847 failed query. Hopefully this will correct the PostgreSQL failures.
849 kes Implement algorithm to handle only one appendable volume with
850 Prefer Mounted Volumes = no.
851 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
852 returned from a query.
853 kes Make volume lock recursive.
854 kes Implement an additional volume reservation algorithm that
855 starts by considering all reserved volumes then uses the
856 old brute force algorithm of searching the resources to
857 find a suitable device.
858 kes Add new reservations debug code and refine the old code.
859 kes Update the win32/dll/bacula.defs file.
861 kes Tweak reservations algorithm to permit a few more cases, i.e.
862 volume reserved, but on different drive, ...
863 kes Enhance SD status to include Pool and Media Type for drive in a
864 more readable format (a bit longer).
865 kes Fix PostgreSQL double free.
867 kes Minor refactoring of restore decryption code.
868 kes Add code to smartall.c to detect double free of a buffer.
870 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
871 so that bsmtp will create a correct email address (mailbox only).
872 kes Modify 'memory' command so that the buffers are listed as 'In use'
873 to avoid confusion with Orphaned buffers.
874 kes I reworked the OpenSSL include/lib flags to be handled in
875 the standard Bacula way, which should fix bug #863 concerning
876 non-standard OpenSSL libraries.
878 kes Implement Help Browser window for bat.
879 kes Fix reload bug that reset StorageId to zero.
881 kes Fix TLS #ifdefing when TLS turned off.
882 kes Ensure that when labelling a tape with Slot=0 that InChanger
884 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
886 kes Add StartTime to final uar_sel_jobid_temp query so that we can
887 add DISTINCT (required by PostgreSQL).
888 kes Implement BSOCK authenticate_director() method. Eventually will
889 authenicate all daemons.
890 kes Move several more functions into the BSOCK class.
892 kes Add code to tell the OS that we no longer need a cached
893 file that we were reading. In findlib/bfile.c. Also,
894 only cache files that we are reading. Thanks to
895 Tobias Oetiker <tobi@oetiker.ch> for the idea.
896 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
897 kes Implement script to automatically generate cats and dll .def
899 kes Update README.mingw32 to include new .def file generation.
900 kes Correct typo in UTF-8 error message as reported by:
901 jhernandez <julianhernandez@gmail.com>
902 kes Add additional sm_check() code on debug level 1.
903 kes Set default debug level to 1.
904 kes Trap SIGABRT in attempt to get traceback.
906 kes Reduce bat connect timeout from 30 to 15 seconds.
907 kes More restructuring and implementing BSOCK class in place of
909 kes Remove a few unnecessary malloc() tests in crypto code.
910 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
911 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
912 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
914 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
916 kes Fix Verify InitCatalog. The attributes were not pointing to the
917 correct saved location.
918 kes Implement message callback so that GUI is sure to get all
919 daemon messages. Currently displayed in a dialog in bat.
920 kes Ignore SIGUSR2 (Bacula timer) in bat.
921 kes Apply regress patch from bug #859 to allow regress to work
922 with Solaris compiler.
924 kes Begin adding TLS support to bat.
925 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
926 clean up lex.c and make it more readable.
928 kes Move more bnet functions into the BSOCK class.
929 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
930 kes Complete change of berrno strerror() method to bstrerror()
934 kes Cleanup incorrect email addresses in bsmtp.
935 kes Make bat display initial messages rather than discard them.
937 kes First cut of adding .mod to the run command.
938 kes Implement auto display of messages in bat.
939 kes Enhanced preferences to allow all Bacula output to be
942 kes Try to make bsmtp date routines more generic.
943 kes Fixed bug #856 autochanger documentation.
944 kes Rework bsmtp date editing for Win32. This fixes bug #854.
945 kes Add new cats entry point so Win32 builds.
947 kes Attempt to fix bsmtp date editing on OSes without %z editing.
949 kes Do better checking for the MySQL 64 bit libraries looking for both
950 .a and .so libraries.
951 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
952 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
953 kes Require the thread safe version of MySQL during configure. Thanks
954 to Andre Noll for pointing this out.
955 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
956 continuing in migration code.
957 kes Apply implementation of tray-monitor font derived from gnome-console
958 submitted by Andreas Piesk <a.piesk@gmx.net>
960 kes Eliminate important memory loss in SQLite
961 kes Fixed the batch insert MySQL thread specific data that was not
962 being freed. See cats/mysql.c:db_thread_cleanup().
963 kes Fix restore before command.
964 kes Convert old hdr.name to name() in a few places.
965 kes Implement update jobid command.
966 kes Return all time_t dates in db_get_job_record()
967 kes Stop watchdog in SD earlier.
968 kes Put Pool just after Storage in please mount message.
969 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
972 kes Update the po files.
973 kes Fix Verify InitCatalog by making it cache attributes.
975 kes Change name bacula-bat to bat for man 1 page to correspond to
977 kes Check for client and store NULL pointers in status command. This
979 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
980 kes Fix sign extended editing of %p.
981 kes Clean out a little old #ifdefing in cats/mysql.c
983 kes If time diff between DIR and FD is more than 600 seconds convert
984 INFO message to WARNING.
985 kes Implement heap size display in status for all daemons.
986 kes Attempt to fix MySQL db open memory loss (not successfull).
987 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
988 kes Eliminate memory loss in MySQL (possibly other SQLs) during
989 Query. This looks like a MySQL but but by doing extra releases,
990 the memory goes away. This should fix bug #847.
992 kes When backup fails, cancel SD before waiting for sd termination.
993 kes If SD is waiting for FD to connect during cancel, wake up the
995 kes Fix fsf code so that errno is correctly reported.
996 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
998 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
999 so that Bacula doesn't later stumble into a seg fault.
1000 kes Use the term Restore Client in the restore Job report.
1001 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1002 the original job's FileSetId.
1003 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1004 spooling in migration jobs. Not yet tested.
1005 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1006 reading conf file from a pipe. However, do it with open_bpipe()
1007 rather than popen. Not yet tested.
1009 kes Fix an ugly bug where the VolCatBytes were getting updated
1011 kes Implement bconsole memory command that prints current memory
1012 usage, plus smartalloc dump.
1013 kes Clarify some error messages in backup, admin, and migrate.
1014 kes Shrink label dialog to smaller size.
1015 kes Invert Cancel OK buttons on restore to be OK Cancel.
1016 kes More strerror() to bstrerror() conversions.
1018 kes Start implementing bstrerror() in place of strerror().
1019 kes Stripping path -- seems to work.
1021 kes Prevent door and port files from being restored (mostly
1023 kes Free an unreleased buffer in compat code.
1024 kes Change console Job name from *Console* to -Console- to eliminate
1025 Win32 filename problems. Put Win32 path separator when creating
1026 Console file. This fixes bug #846.
1027 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1029 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1031 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1032 to force Win32 error message.
1034 kes First cut strip path. The data should be passed to the FD,
1035 but nothing is done with it yet.
1036 kes Enhance the digest and signature routines in the crypto
1037 library to accept a JCR and to use it to print error messages
1038 so that they will go in the Job report rather than the daemon's
1040 kes Simplify some of the verify signature code.
1041 kes Simplify a few of the alternative returns in the signature
1044 ebl Use only POSIX regex instead of GNU regex in breg.c for
1045 File relocation. It fix broken freebsd compilation.
1046 kes Convert all other Dir files to use new ua class message
1048 kes Tentative fix for missing digest signature in bug 807.
1049 kes Correct handle problem in new win32_ftruncate routine.
1050 kes Convert ua_purge.c and ua_update.c to use new ua class
1051 message routines for bat.
1053 kes Correct incorrect installation of LICENSE in Win32 installer.
1054 kes Display LICENSE at the beginning of the Win32 install.
1055 kes Attempt to correct the need for the png files to be installed
1057 kes Reapply my bat.conf install script in qt-console. I think I
1058 editted bat.pro instead of bat.pro.in and it was lost.
1059 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1060 the /var/lock/subsys for subsysdir. Also corrects typos in the
1063 kes First cut update job.
1064 kes Correct configure to include qmake of src/qt-console directory.
1066 kes Make restore job yes/mod/no print in one command so GUI works.
1067 kes First cut implementing backup and restore client.
1068 kes Correct editing in Verify output that caused a seg fault.
1070 kes Insure that bat.conf is not overwritten during installation.
1071 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1072 while I was implementing migration in March 2006 !
1074 ebl Cleanup file relocation, using char *RegexWhere instead of
1075 char *where + bool where_use_regexp
1076 kes Update some manpages and add bat manpage.
1077 kes Make a first cut at converting bacula.spec.in for bwx-console
1079 kes Apply patch from John Goerzen to add hostname as fourth argument
1080 to make_catalog_backup script.
1081 kes Fix typos I introduced into bsmtp.c
1082 kes Make pm_strxxx() routines handle input of NULL pointer. This
1083 is to protect from NULL pointers returned from SQL databases.
1084 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1085 kes Add more debug to FIFO code -- fix fifo regression test.
1087 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1088 kes Add thread timer to bnet_connect() to break from OS if wait time
1091 kes Update Win32 build to include new files, new symbols, and
1093 kes Implement socket level heartbeat (tcp_keepidle)
1094 ebl Commit File relocation patch
1095 kes Make bat have 'make install' target.
1096 kes Warn during install if old gnome-console binary found.
1097 kes Warn during install if old wx-console binary found.
1098 kes Add -8 option to bsmtp command line to add content type utf-8.
1099 Fixes bug #809. (Character coding problem in bsmtp).
1100 kes If < is found in target (from, to, cc) then do not enclose the
1101 target in < > in bsmtp. Fixes bug #772 (malformed address).
1102 kes When printing certain items in dbcheck, stop after 300000.
1103 Fixes bug #822. (dbcheck loops).
1104 kes Incorrect status in Dir after waiting for mount with poll set.
1107 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1109 kes Print waiting to reserve a device every 5 mins.
1111 kes Don't call close_part in label.c if tape and relabel.
1112 kes Don't free volume if busy in close() -- should help with
1114 ebl Fix #824 RunScript bug (After script could be execute twice)
1115 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1116 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1117 Add a regression script to test RunScript
1119 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1122 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1123 deprecated. No additional bugs will be fixed, and they will be dropped
1124 in a future release (probably 2.4.0).
1125 kes Change name of wx-console to bwx-console to make it more Bacula
1127 kes Change the name of gnome-console to bgnome-console to make it
1130 kes Some time in March, a Feature Request with patch from Jorj Bauer
1131 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1133 The ability for the director to validate a Client (FD) CN against
1134 an arbitrary set of patterns rather than the hostname, with
1135 A new 'TLS Allowed CN' set of directives which are implemented
1136 in the Client resource. Then pattern matching is used in place
1137 of hostname matching against the Certificate's CN. As an example, we
1138 have certificates which (a) use a local CA, and (b) have a CN of the
1140 kes Add new/changed entry points to Win32 build
1141 kes Create unaccepted-projects for projects that are not accepted.
1142 kes Simplify locking in the reservations system.
1143 kes Add more debug code in reservations.
1144 kes Make sure error condition on reserving a volume is handled correctly.
1145 kes Correct handling of volume_in_use.
1146 kes Correct handling of initializing a device.
1147 kes Move handling of broadcasting releasing a device into release_device().
1148 kes Correct attaching dcr to dev so that it is only done if device
1149 is properly initiated.
1151 kes Locking debug level tweaks in SD.
1152 kes Tweak new Volume code.
1154 kes Add exec external-command [wait-seconds] to bconsole. This
1155 executes the external-command. Note! normally external-command
1156 should be enclosed in double quotes.
1157 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1158 it should normally be off in a production system.
1160 kes Implement die command for SD so that we can force it to dump.
1161 kes Implement SD lock debug code.
1162 kes Implement new algorithm for keeping Volume list in SD. It
1163 is now owned by the device.
1165 kes Implement new code for freeing in use volumes that should
1166 resolve if not all, some of the problems of multiple drive
1167 tape conflicts described in bug 801.
1169 kes Fix gui/bacula-web/images files in svn.
1170 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1172 ebl Fix a bug in batch mode (in string escape)
1173 kes Correct migration prune SQL typo that crept in in a
1174 recent 2.1.x change.
1176 kes Move bnet_despool() into class in bsock.c
1177 kes Modify job report to include director name and Build OS.
1178 kes Move drop root privilege and check_catalog() before fork.
1179 kes Add update database scripts (version 9 to 10) to updatedb directory.
1181 ebl Check size and age of each file after its backup to see if
1182 it has changed during backup, if 'checkfilechanges' is set.
1183 The FD will do an extra check (stat(2)) after
1184 each file backup. mtime, ctime and size are compared with
1185 'before backup' information. If time or size mismatch, an
1186 error message will be generated. You must upgrade FD to use it.
1188 kes Make database name and user configurable
1189 --with-db-name=xxx --with-db-user=xxx
1190 kes Add back database type to message.c for debugging.
1192 kes Implement dir_sql() which issues an SQL query.
1193 kes Modify bat medialist to use dir_sql() and do some minor C++
1194 formatting as well as eliminating a number of pointers, simplifing
1197 kes Fix some of the mtx-changer grep commands for tape label readers.
1198 kes Convert a number of bsendmsg into the appropriate send/warning/error
1199 message class calls.
1200 kes Suppress the using database message in the .sql command.
1201 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1203 kes Add context menu for floating a window.
1204 kes Some minor cleanup and name changes in qt-console
1205 kes Add doing mt setblk 0 in Win32 mtx-changer.
1206 kes Apply Martin's bug fix to move definition of ENODATA for
1208 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1209 sqlite2 and sqlite3.
1211 kes More pruning cleanup.
1212 kes Turn on wait_for_drive by default in mtx-changer.
1213 kes Turn on Batch insert code by default as it now passes regression.
1214 kes Add ./configure --enable-bat to enable building of Bat.
1215 No install yet though.
1217 kes Implement a new .sql command for bat.
1218 kes Implement code to turn off pruning in obtaining the next volume.
1219 Pruning is turned off for the status dir command, but turned on
1220 for SD requests and for the list nextvolume command.
1222 kes Correct Qmsg() that was not updated correctly when committing a
1223 previous change (probably the recent TLS patch).
1225 kes Write new subroutine is_volume_purged() that explicitly checks
1226 if the Volume is purged, and if so marks it as such. This should
1227 resolve problems reported about needing to mount twice to recycle
1229 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1230 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1231 amount of duplicated code.
1232 kes Do volume pruning only for the Media Type desired (reduces pruning time
1233 if multiple Media Types are in the same pool).
1234 kes Implement more detailed info in the Job report for the Bacula version
1236 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1238 ebl Add bbatch tool to bench database and insert mode.
1239 Fix sql quote stuff in batch mode
1240 Fix sql stuff for mysql
1242 kes Correct problems with am/pm scheduling. Fixes bug #808.
1243 kes Implement new prunning code that prunes up to 1000 jobs at
1244 the same time. The same technique can be applied to a number
1245 of other prune/purge subroutines.
1246 kes Add an insanity check when starting a new tape job to ensure
1247 that the tape position has not been changed. If so fail the
1249 kes Fix Win32 build for dlls to add the folllowing:
1250 src/lib/bsock.c -- new file with new entry points
1251 src/lib/dlist.c -- new entry points
1252 src/cats/sql_create.c -- new entry point
1253 src/cats/sql_cmds.c -- new DATA item exported
1255 ebl batch mode cleanup bscan-test is ok now.
1256 kes Implement SD code to check length of disk volume before appending.
1258 kes Correct return status on db_batch... routines.
1259 kes Add call to db_write_batch_file_records() to migration code.
1260 ebl Fix AfterJob timing
1261 kes Move the checking of the database in initializion of the Director
1262 to after we drop privileges. This avoids the need for both root
1263 and bacula access to the DB.
1264 kes Correct a misplaced variable definition in src/filed/backup.c
1265 kes Correct how the new batch insert db_create_attributes_record()
1266 uses the arguments. Caused a seg fault in bscan.
1267 kes Implement lock() and unlock() methods in DEVICE class.
1268 Implement block() and set_block(xx) methods in DEVICE class.
1269 kes Modify bnet_connect() so that it uses time() to check for the
1270 wait time expiring (on some OSes, some system calls may not
1271 return immediately).
1272 kes Modify Verify to obtain the previous JobId when it is actually
1273 running rather than at schedule time (as it was in 1.38.x).
1274 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1276 kes When checking pid in pid file, continue running if the pid is
1277 the same as ours. This occurs on IRIX after a system crash.
1280 kes Extend new GUI API.
1281 kes Make the ua structure a class, and implement send_msg(),
1282 error_msg(), warning_msg(), and info_msg().
1284 kes Apply fix from for building wx-console on the Mac from
1286 kes Implement new select mechanism for GUI programs.
1287 kes Reorganize initialization of stackedWidgets in bat.
1289 kes Add updated nagios plugin supplied by Christian Masopust.
1291 kes More bat implementation.
1292 kes File migrate bug with Pool Occupancy using mediaid instead
1293 of jobids. Fixes bug #795.
1294 kes Fix orphaned buffers in filed backup and verify due to
1295 crypto buffers not freed during errors. Fixes bug #789.
1296 kes Extend new GUI api code to tree commands.
1297 kes Ensure that tree and dot commands check console ACLs.
1298 kes Permit marking directory with trailing slash.
1299 kes Allow 20 console connections (instead of only 10).
1301 kes Add smartctl call to bacula-sd.conf as an example of getting
1304 kes Modify jobq.c to let simultaneous restore jobs run. This may
1305 cause them to fail if they cannot get a drive.
1306 kes Add Client Connect Wait to Storage daemon to permit users to
1307 modify the time the SD waits for a FD connection.
1309 kes Correct virtual changer check which was backwards. This caused
1310 volumes to be unloaded into slots already occupied.
1312 kes Apply Command ACL filter to JobId list in restore command.
1313 kes Correct typeo in var.c patch.
1315 kes Don't let Bacula prune File or Job records for the current Job.
1316 kes Fix variable substitution pad + inc bug reported (with patch)
1319 kes Correct SQLite log table index as reported by Luca Berra.
1321 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1323 kes Begin implementing new comm signals for API.
1324 kes Fix a few places in lib/message.c where the open fd may
1326 kes Continue implementing lib/bsock.c (real class). Make jcr,
1327 who, host, and port private. There are new methods to access
1328 them for non-class use. This required touching a number of files.
1330 kes Add LANG=C to autoconf/randpass so it works with languages other
1331 than English. Fixes bug #788.
1333 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1335 You will not be able to generate Include/Exclude list any more.
1336 It will be fixed soon.
1337 If you want to use this, you can apply
1338 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1340 kes Restore of sockets created false error messages because Bacula
1341 no longer restores sockets, but the code was still trying to
1342 set the attributes on a non-existent file. Reported by a user.
1343 ebl finish RecyclePool feature
1344 Media will takes Pool.RecyclePool
1345 when moving from Scratch to a Pool or when user will do
1346 update volume=xxx frompool
1347 To use it, add RecyclePool = aPool to your Pool resource
1350 RecyclePool = Scratch
1354 kes Expand new BSOCK class adding signal() and new BNET signals.
1355 kes Begin enhancing the dot commands adding a new API function
1356 that returns more information and will make it easier
1357 to interface to the Director from a program.
1359 kes Make DEVICE fd private. Its new name is m_fd, and can be
1360 obtained with dev->fd() outside the class. This is the
1361 first of many DEVICE members to be made private.
1362 kes Implement Michael Renner's idea on having a virtual disk
1363 changer. I made some minor modifications (e.g. I did not
1364 implement the Virtual Changer directive, but simply set
1365 the Changer Command to an empty string.
1367 kes Implement a BSOCK send() method that writes the whole record
1368 in a single write() request rather than in two.
1369 ebl add update volume=xxx recyclepool=yyyy
1370 volume takes recyclepool from pool when using update volume=xxx from pool
1372 kes Fix encryption deblocking bug, which caused some restored files
1373 to be truncated. This fixes bug #763.
1374 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1375 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1377 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1378 ebl Use btime_t instead of uint64_t in media patch.
1380 kes Optimize the use of the database a bit in the Status dir command.
1381 Only open it when needed, ensure that if any previous database
1382 was opened, it is closed.
1384 kes Correct VolCatBytes bug from media patch.
1385 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1386 in the case of orphaned records.
1387 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1388 and File records in 300K chunks to be more efficient. This
1389 idea came from Juan Luis Frances (if I remember right).
1390 kes Apply Eric's scratch patch that moves a purged Volume to
1391 the RecyclePool. Question: how is RecyclePool set? what
1392 happens to the ScratchPool?
1393 kes Apply Eric's media patch that collects read/write media
1394 times as well as byte counts. This patch requires a
1395 simultaneous upgrade of the DIR and SD. Note, there
1396 should be some way to turn off timing. I'm not sure
1397 times are in Bacula units.
1398 kes Apply Eric's batch-insert patch.
1400 kes Update projects list.
1402 kes Implement Include/Exclude file lists in FD as dlists using
1403 the new dlistString class. This permits efficiently having
1404 large include/exclude lists and completes project Item 25.
1405 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1406 console is authorized to cancel the job. This fixes bug
1408 kes Modify SD so that the VolCatJobs medium record is updated
1409 at the beginning of a Job rather than the end. This
1410 fixes bug #775 where exceeding MaxVolJobs caused jobs
1412 kes Added a mutex around getting and setting Volume information
1413 so that multiple simultaneous jobs will single thread.
1415 Switch to using Subversion
1416 kes Remove src/pygtk-console/ from configure
1418 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1419 plus the entrypoints.
1420 kes Apply patch supplied that corrects debug print
1421 in canceling jobs for max run time. Supplied as
1422 part of bug #621, which was previously fixed.
1424 kes Test on job_canceled() and sd_msg_thread_done inside
1425 loop starting the message thread to avoid a race condition.
1427 kes Remove rl_catch_signal from console.c as it conflicted
1428 with the header definition. Fixes bug #765.
1429 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1431 kes Clarify some stored/acquire messages to indicate if the
1432 problem is with read or append.
1434 kes Fix memory leak with storage ids in cats/sql_get.c
1435 kes Terminate watchdog earlier to avoid reference to released
1436 memory -- reported by Jason Austin.
1437 kes Move closing the database from jobq.c to the director daemon
1438 termination routine. This fixes memory leaks for shadow jobs
1439 (i.e. migration jobs).
1440 kes Free up the unique jobid chain items in migrate.c. This fixes
1441 a memory leak problem.
1442 kes Convert some ugly looking for statements to use foreach_alist
1443 in findlib/find.c. This will facilitate converting the structures
1444 to use dlist (for large include/exclude lists).
1445 kes Fix a bug in the btree.c and btree.h routines, then rename them
1446 rblist and add them to be built in src/lib. Include some new
1447 methods written by Rudolf Cejka that make the code more readable
1448 (hides some of the ugly casting).
1449 kes Add set_next() and set_prev() methods which make the code much more
1450 readable. Also add a new dlistString class that facilitates storing
1451 strings in dlists. To be used in the large include/exclude lists.
1452 kes Make some trivial modifications to lib/tree.h that use rblist
1453 rather than dlist for storing the tree links. This was suggested
1454 by Rudolf Cejka. The result of this is that the restore tree now
1455 uses red-black binary trees rather than simple linked lists. This
1456 should give rather dramatic speed improvements for directories
1457 contining large numbers of directories/files (more than 10000).
1459 kes Fix maxruntime bug #621.
1461 ebl Implement the include JobID in spool file name project.
1462 kes Reorder projects file in order determined by Jan 2007 vote.
1463 kes Implement item #12 on project list -- quick release of FD by
1465 kes Fix open of SQLite3 db where user does not have write permission
1466 so that DIR does not crash. Fixes bug #761.
1468 kes Add back missing @ in Win32 Makefile.
1469 kes Change 'Device not configured to autolabel' from INFO
1471 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1472 which should restart an indefinite # of times.
1473 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1474 other DIR specifications.
1476 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1477 Fix path quoting in SQLite scripts.
1478 Fix problems with SHGetFolderPath.
1480 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1482 kes Fix Job restart on error bug that promotes an Inc to a Full
1483 backup. This should fix bug #755.
1484 kes Add qt-console and first cut of code.
1488 kes Fix Bacula->Documentation link on Win32 to point to index.html
1489 instead of bacula.html. Fixed bug #750.
1490 kes Return JobId in db_get_job_record() when JobId==0. This should
1492 kes Do not release source pointers when restarting a failed job.
1494 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1495 This *should* fix bug #747.
1496 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1499 kes Modify USTORE constructor to set an empty store_source string,
1500 and don't copy the store_source string in a cancel. Hopefully
1501 this will fix Arno's seg fault, bug #744.
1502 kes Add back code to disable conio in configure. Fixes bug #743.
1503 kes Correct the Options scanner in the FD to correctly handle
1504 SHA1 option, which was eating the next option. Reported by
1506 kes Add code to indicate when the SD is spooling, spool wait, and
1507 despooling as requested by Alan Brown.
1509 Version 2.0.0 released: 4 January 2007