1 Technical notes on version 2.3
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
20 Improved status commands for Bat
21 Spooling/despooling status
22 Implement ftruncate for NFS devices
23 Add long term statistics job table
28 kes Add create_postgresql_database.sql to Win32 installer. Should
29 fix problem reported by Juilio Monteiro.
30 kes Get correct slot when auto unloading a device.
32 kes Fix multiple media restore.
33 kes Make DEVICE Slot private and access it via a method.
34 Allows better control over when it is set and cleared.
35 kes Fix possible seg fault if SQL error.
37 kes Add Martin's fixes to argument scanning for the estimate
38 command. This fixes bug #1093.
39 kes Add debug code to SD.
40 kes Fix renaming a Volume, which used the wrong Volume name.
42 kes If operator has rewind tape, print warning, release tape and
43 try once more. If tape is positioned somewhere, something went
44 wrong, so mark the tape in error and try once more. Previously
45 this error was fatal, now it produces an error message.
46 kes Ensure correct volume name displayed during restore
47 kes Ensure that Volume is mounted for restore.
49 kes Fix a few more Coverity reported problems.
51 kes Apply Allan Black's status dir job count patch.
52 ebl Add information about IMPORT/EXPORT slots in mtx-script.
53 kes Enhance a couple of SD debug messages.
54 kes Tweak unload flag setting and ensure it is set during swap.
56 ebl Fix #1091 about bad output in estimate command.
58 kes Modify autochanger locking to attempt to avoid race
60 kes Make sure device not busy before doing label command.
61 kes Display open() errors except when polling. Previously too
62 many were suppressed. This should fix bug #1070.
63 kes Fix Win32 reparse points. Bacula will not recurse into any
64 reparse point directory, including mount points, unless the
65 directory is explicitly mentioned at the top level (same as
66 with Unix). A file that is linked to another file will be
67 backed up -- much as Unix does for hardlinked files.
70 kes Remove double quotes from ChangeLog and ReleaseNotes
71 kes Remove StorageId test when pruning and recycling (Eric's changes).
72 kes Remove old form of locking when getting volumes -- causes deadlock.
73 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
74 the name unique and to eliminate compile time error.
75 kes Add accurate.o to Win32 FD Makefile
77 kes Fix cats dll build on Win32 after db_update_job_end_record
78 calling sequence change.
79 ebl Switch to tokyo dbm instead of htable in accurate code
80 ebl Include tokyo dbm to bacula source tree
82 kes Fix buffer overruns detected by Coverity.
84 kes Tweak joblog display.
86 kes Implement --without-qwt
87 kes Fix layout of restore tree dialog
88 kes Add configure bat QWT libraries, so that bat can be built
89 with or without the QWT libaries.
91 ebl Add dummy tape driver for regression tests.
92 kes Make sure we unload the right slot when swapping.
94 kes Add debug times, reduce size of two-pool-changer test
96 ebl Tweak autoconf scripts for faketape
98 kes Improve SD reserve debug code.
99 kes Testing an improvement to free up volumes no longer in use.
101 kes Rework SD acquire for read to handle autochanger Volume
103 kes Implement regression that explicitly tests swapping a Volume
104 from one drive to another.
105 kes Enhance disk-changer to detect most error conditions.
106 kes Fix SD code so that it properly swaps a Volume between drives.
107 This fixes bug #1083.
109 kes Apply libdbi patch from Joao Freitas for regress and for
110 Bacula trunk. Regress now works with libdbi. Nice.
111 kes Apply .nobackup patch from bug #1077 submitted by
113 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
114 name into jobs cloned via the run directive.
116 kes Prevent a Volume that is being swapped from being freed from
117 the volume list. This will most likely fix, at least partially,
119 kes Fix strippath so that it does not get a buffer overrun and crash FD.
120 This fixes bug #1078.
121 kes Remove 50 millisec wait in SD that broke debugger.
122 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
123 that a job may run, counted from when the job was scheduled.
124 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
125 a job may block waiting for a resource, counted from when the job starts
126 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
127 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
128 that implements multiple commands per line in the console when using
129 readline. Modify the default to use a semicolon as the command separator.
131 ebl Fix SQL query in migration code.
132 ebl Make accurate mode with hash disk pass regression tests
134 ebl Implement first cut of accurate backup with hash disk.
136 kes Force unload of volume when wrong volume mounted in SD.
138 kes Fix bat seg fault at termination.
139 kes Add Bacula generated version to bat about box.
142 kes Experiment with allowing multiple read jobs.
143 kes Move final volume swapping code to DCR method and
144 call it from acquire_for_read().
145 kes When wrong volume is mounted during read, unload_autochanger.
147 kes Integrate the libdbi changes from Joao Henrique Freitas
149 kes Stop searching for Volumes in SD askdir if DIR returns the
150 same volume name twice in a row.
151 kes Close bat console windows first to eliminate error message
154 kes Tweak the swap Volume from one drive to another code so that
155 it now seems to work.
156 kes Resolve several problems with recycling that broke the new
157 code (these problems are in 2.2.9 as well).
158 kes Remove the volume lock when calling the sysop code.
159 kes Don't mark a reserved volume with no writers as unused otherwise
162 kes Rework class structures for VOLRES, DCR, and DEVICE to make
163 the method names a bit more logical, and for more logically
164 handling the responsibilities.
166 kes Remove redundant code in terminating the scheduler that just
167 causes a seg fault in many cases.
168 kes Cleanup releasing a volume and make it a DCR method.
169 kes Improve algorithm for detecting pre-reserved volume and
172 kes Tweak volume swapping code so it works.
173 kes Correct name overloading in mount.c
174 kes Replace released flag in VOLRES with reserved and add access
175 methods for the VOLRES class.
176 kes Prevent volume from being released while being swapped.
177 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
179 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
181 kes Refactor parts of stored/mount.c
183 ebl Add sanity checks for VolWriteTime and VolReadTime
184 ebl Take care of bad clock changes while computing VolWriteTime
185 and VolReadTime. This should fix or limit #1066
186 kes Correct error string numbers in dird/catreq.c
187 kes Restructure reserving, acquiring, and mounting volumes. Calls to
188 autochanger are deferred for mount.c -- simplifes the code.
190 kes Do not prune any running job. It just fails the job.
191 kes Lock the volumes when changing dev->reserved_device and marking
192 the volume unused otherwise the device can get reserved by
193 another job before the volume is released, thus blocking it.
195 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
196 kes Fix bug #1063, reuse of freed ptr in list nextvol.
197 kes Release regex compile buffer in filed/job.c
198 kes Add proper type of const char in sql_create.c
199 kes Turn off debug in daemon termination routines
200 kes Move free_volume_list() before devices are freed in stored.c
201 kes Fix reference to uninitalized stack variables in bregex.c.
202 This should correct bug #1067.
204 kes Fix possible seg fault in SD when freeing a volume entry.
206 kes Implement unload_dev() before swap device.
207 ebl Add statistics prunning with option and menu
208 kes Separate unload_dev() from unload_other_device() in autochanger.c
210 kes Apply patch from bug #1069 that corrects spurious error messages
211 when ACLs enabled on SGI but no ACL exists.
212 ebl Fix small segfault in bacula-sd when debug level is 500
213 kes Modify run_program() and run_program_full_output() to use
214 call by reference for the results string. This corrects a long
215 standing problem where the address of the string may be changed
216 in the subroutine but not in the calling program.
218 kes Re-enable code to remember last volume mounted on a non-tape
220 kes Add patch supplied in bug #1068 that fixes a SD crash when using
221 a Virtual autochanger.
222 kes Generate correct JobMedia records during spooling/despooling when
223 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
224 <tih@hamartun.priv.no> for excellent analysis and testing.
226 kes Tweak hash algorithm for htable using Martin Simmons idea
227 for doing a circular shift.
228 kes Remember what volume is in VTLs (previously turned off for
230 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
231 pointed out some problems in creating JobMedia records during
232 spooling with concurrent jobs. Fix the problem by updating the
233 start file position before despooling and generate a jobmedia
234 record at the end of despooling.
236 kes Fix handling of JobMedia records during spooling and when a
237 Volume is changed without actually writing data to the Volume.
239 kes Rework certain SD locking based on gdb tracebacks of deadlocks
240 sent by Eric. This code now uses only the volume_lock() rather
241 than the reservations lock when at EOM and acquiring a new
243 kes Ensure only one exit point in several subroutines.
245 kes Implement bsock code to permit locking. Use the new code in Verify
246 in the FD to prevent the heartbeat thread from disrupting the Verify
247 data sent to the Dir.
248 kes Modify SD locking to eliminate locking the reservations system from
249 outside the system. Use the volume lock when getting media data
250 and reserving a new volume at end of media.
251 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
252 when SD starts are not locked into place.
254 kes Fix error compiling runscript code on 64 bit machines.
255 kes Tweak Win32 mount point code.
256 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
257 cleared giving bad file estimate).
258 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
261 kes Keep Schedule run lists in order as suggested by
264 kes Implement autostart scripts for Debian.
265 ebl Implement upgrade catalog scripts.
267 ebl Apply jobstat patch for long term statistics. Have to implement
268 purge stats command and upgrade scripts.
269 kes Fix mtx-changer.in for broken Debian mt program.
271 kes Fix large number of JobMedia records reported by Eric Bollengier.
273 kes Apply doc fix from bug #1062.
274 kes Resolve crash and improper restore wx-console Win32 restore
275 GUI. Fixes bug #1065.
276 kes Update Win32 wxWidgets to latest version.
277 kes Attempt to do correct handling of Win32 mount points. Should
279 kes Fix Win32 FD backup/restore memory leak due to improper termination
280 of BackupRead/Write. This fixes bug# 1038.
282 ebl Reduce memory usage for accurate backup, working only with ctime
283 and mtime. (not all Lstat field)
284 About 40MB for my linux system (400.000 files)
286 kes Add dcr->reserved_volume flag that allows us to release a volume
287 even if it is not vol->released. This allows maxvol2 to work when
288 Volumes expire and we are already writing to the device (i.e. a
289 volume is pulled out from under us by another job terminating after
290 we reserve the drive).
292 ebl Permit multiple command/console per runscript definition.
293 RunScript { command = /bin/true ; command = /bin/false ... }
294 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
295 (restart an application) just after the VSS snapshot on windows.
296 kes Don't zap dcr values during release_volume() as they might
297 have the next Volume to be mounted.
298 kes Fix AIX prototype.
300 kes Second cut of drive switching during backup.
303 kes Update Win32 version of wxWidgets to most recent version.
304 kes Tweak Copy job details.
305 kes Rework dir_find_next_appendable_volume to make a bit more effort
306 to find a suitable volume before giving up.
308 kes Make ask_sysop_to_create... to return if waken from wait.
309 This helps get out of blocked conditions.
310 kes Experimental implementation of switch_device in reservations.
311 kes Implement FD version to allow easier protocol changes.
312 kes Add Plugin Options string -- not yet passed to FD.
313 kes Implement PluginOptions ACL.
315 kes Attempt to correct problems with restores with autochangers and
316 use counts going negative
317 kes Rework SD status command and implement API for bat. Implements
318 header, runing waitreservation, devices, volumes, spooling,
319 and terminated status keywords.
320 .status storage=xxx <keyword>
321 kes Clarify TLS error message by adding double quotes around name.
322 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
323 kes Pass jcr to tls routines so debug messages can be handled better.
324 kes Rework jobq resource allocation code, and possibly fix a bug
325 that caused reference counts to get out of sync.
327 kes Rename fd/dir plugin to use Bacula standard underscore.
328 kes Plugin work -- bring dir up to fd level.
329 kes Start implementation of VTL code
330 kes Fix Win32 build after adding new cats subroutine.
332 kes First cut at Duplicate Job implementation.
334 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
335 kes Start PluginOptions string, and refactor a bit of ua_run.c
336 ebl Apply Allan patch that permit to reset recyclepool.
338 kes Test patch -- possible fix or improvement for bug #1053
339 kes Refactor FD and SD status commands to permit new API code in
340 SD, and to fix Win32 build.
341 kes Win32 build is now working.
343 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
344 some ideas in patch from Scott Bailey.
345 kes Begin implementation of duplicate Job control.
346 kes Fix some of Win32 build after recent additions.
347 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
348 which causes the FD to detect whether or not the OS has the
349 honor no dump bit (*BSD systems), and if so, to skip backing up
350 any file with this bit set. The feature is enabled by setting
351 'honor no dump flag = yes' in the Options section of a FileSet.
353 kes Correct po warning message with datarootdir
354 kes Implement more code in dird.c to put configuration parsing in
355 a class rather than use globals.
356 kes Restructure SD status command for implementation of bat API
359 kes Suppress incorrect 'Will not descend from x into y' messages.
360 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
361 daemon globals used by parser.
362 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
364 kes Fix free of plugin_list when none exists.
366 ebl Apply accurate project patch.
368 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
369 on non-mempool object)
370 kes First cut of converting FD .status to work with bat API.
372 .status client=XXX header
373 .status client=XXX running
374 .status client=XXX terminated
375 kes Implement first cut of Copy Job.
376 kes Implement Catalog in Pool resource. It overrides catalog specified
377 in the Client resource.
379 kes Apply patch (with some difficulties) from Joao Henrique Freitas
380 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
382 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
383 ftruncate() actually works. In the case of some (cheap) NAS devices,
384 it does not, and so recycling NAS Volumes does not work. The code
385 simply unlink()s the file, then recreates it. This fixes bug #1011.
387 kes First incomplete cut of big malloc blocks for htable.
388 kes Tweak plugin code.
390 kes Plugin debug code + tweak a couple bat dialog layouts
392 kes Fix creating first JobMedia record during Migration to include
393 proper index. This caused slow restores of migrated jobs.
394 kes Temp fix to plugin name file_index.
395 kes Bacula backed up and restored a MySQL database.
397 kes Implement plugin restore.
398 kes Implement parsing of db_driver to give db_type index.
400 kes First cut of plugin restore code.
401 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
402 and do not strip paths on symbolic links.
403 kes Set catalog backup database and user name from values specified on
404 the ./configure line.
405 ebl Fix #1031 about wrong pool source information in job report.
408 kes Remove a redundant jcr argument to find_files, match_files, and
410 kes Implement '.status dir header|scheduled|running|terminated' that
411 prints the requested status section. With the exception of the
412 header, the other reports have fields separated by tabs (\t).
414 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
415 a resource embedded run command to find a since time if no explicit
416 since time was supplied on the command line.
417 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
418 that updates the state file at job termination time in addition to
419 when the daemon terminates.
421 kes First version where a plugin did a backup.
422 bpipe-fd.so created a backup file, wrote a test
423 string to it, and Bacua could restore this fabricated file.
425 kes Implement DB Driver = string for the DBI driver.
426 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
427 kes First cut of code for loading Win32 plugin dlls. Implement
428 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
429 and implement a dlfcn.h file based on opengroup's definitions of
432 kes First cut plugin directives.
434 kes Apply patch from bug #1049 to prevent stripping the path on a
436 kes Attempt to fix bug #1047 where stripping a path corrupts the
437 heap. Waiting for feedback.
438 kes Correct the Mount message not to suggest labeling a new tape
439 when doing a restore. Submitted by email by John Stoffel.
440 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
441 FD by using casting. Reported in bug #1042.
443 kes A bit of crypto cleanup. More later.
445 Release Version 2.2.8
447 kes Apply patch from Martin to correct bug #1040, bscan sets existing
449 kes Fixed important spelling error in doc -- bug #1045.
451 ebl Fix bextract to be able to extract non-portable Win32 data to
453 kes Move initialization of read/write res lock earlier in the code.
454 This fixes the crash with a null conf file. This fixes bug
456 kes Redefine CURES in lib/parse_conf to be URES and move it all
457 into lib/parse_conf.c -- this responds to bug #1042, but does
458 not fix it. The fix is not to compile with FORTIFY_SOURCE.
459 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
460 the trunk SVN. I don't think this was reported as a bug.
462 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
464 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
466 kes Add DataDespooling and DataCommitting status (committing is
467 the last despooling).
468 kes Finish implementation of new reservations code noted below.
470 kes Fix bsnprintf for float point numbers. I broke recently when
471 parameterizing some variables. This fixes bug #1036.
472 kes Undo recent reservations changes ... will apply them later
473 when they work better.
475 ebl Fixes #1034 which cause mysql to hang the connection after 8h
476 ebl Change default statistics target of filename.name and path.path
477 fields for PostgreSQL. This speeds lookup by indexes. Thanks
479 kes A few more tweaks to new reservation code. Make sure to clear
480 vol released flag when retaking volume. When reading label and
481 label is bad mark volume unused. When recycling, mark volume
482 unused so it can be renamed.
484 kes Fix reserve_volume() so it doesn't release a volume in use
485 (i.e. a volume entry not marked released). This should be
486 the last part needed to fix bug #1018.
488 kes Move Heartbeat documentation from Job to Director resource.
489 This fixes bug #1033.
491 kes Fix existing switch drive SD code to call autochanger to release
492 any old volume. This must be done to keep the autochanger from
493 releasing subsequently newly reserved volumes in doing a close().
494 This should fix bug #1018.
495 kes Fail if attempting to get console input in batch mode. This
496 should help fail RunScript console commands that are incomplete.
497 kes First cut implementing switch_drive() in SD (not actually called).
499 kes Implement first cut running console commands in a RunScript.
501 ebl Fixes bug #1028 where 'Selection Type' option was not usable
503 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
506 Release Version 2.2.7
508 kes Add new free_tls() entry point so that Win32 builds.
509 kes Fix compile warning in src/lib/util.c
510 kes Fix entry point for edit_job_codes() so that Win32 builds.
511 kes Fix seg fault Frank Sweetser reports in regression testing
512 on his systems. The problem was that the original author of
513 bsnprintf.c did not take into account the side effects of
514 using ++x in the argument to a #define.
515 kes Make SD protocol backward compatible with version 2.2.x.
517 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
518 because Bacula no longer restores sockets.
519 ebl Always use ignorecase fileset option on win32 FD.
521 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
522 that implements double quoting include names in conf files,
523 and also allows piping input by having the first character
524 be a vertical bar (|).
525 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
526 that implement %f in RunScripts to pass the FileSet name.
527 kes Skip leading | when lex input comes from a pipe as suggested
528 by Michael Stapelberg <michael@stapelberg.de>.
530 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
531 Nerijus Baliunas <nerijus@users.sourceforge.net>
533 kes Implement Plugin Directory and plugin events.
535 kes Implement a security enhancement: TLS authentication but no
536 encryption. Enabled by setting 'TLS Authentication = yes'.
537 Note when this is on, TLS encryption is turned OFF!
539 kes This patch corrects a problem where the maximum concurrent storage
540 jobs counter gets out of sync during restore jobs causing jobs to
541 'wait on max Storage jobs'. This patch fixes bug #1009.
543 kes This patch fixes bcopy so that it produces correct Volumes.
545 kes This patch eliminates spurious output to the console during a VerifyVolume
546 job that contains encrypted data. It fixes bug #1024.
548 kes This patch prevents the 'status dir' command from trying to use a scratch
549 volume and possibly moving it from one pool to another. This patch fixes
552 kes Add new include to postgresql.c suggested by Marc Cousins so
553 that it compiles correctly with pgre version 8.3.
555 kes Fix --archivedir addition to configure. Replace it with
556 --with-archivedir in configure.in This fixes the regression
558 kes This patch fixes bug #1012 where the job is canceled because
559 of Max Run Time exceeded when the job has not yet started.
561 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
562 one 'part' to write. Instead of each part being stored on disk,
563 written to DVD, then deleted from disk, all parts are written to disk,
564 and only the last is written and deleted from disk.
565 kes This patch fixes the status command to include the formating string for
566 JS_AttrInsterting. It fixes bug #1021.
567 kes This patch should fix the Mac OS X build problem on the latest
568 Darwin, where sys/types.h was not included correctly (apparently
569 due to a change in the Mac headers). The solution was to explicitly
570 ensure that it is defined for the ./configure.
571 This patch also has a rebuild of configure that includes the Debian
572 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
573 kes This patch should ensure that queued messages to the console are
574 displayed as soon as possible. It should fix bug 1007, but has been
575 reported not to work.
577 kes This patch fixes the infinite loop when trying to increase the
578 maximum number of volumes in a Pool during the add command.
579 This patch fixes bug #1008.
581 Release Version 2.2.6
583 db Remove extra data on estimate command in joblist for bat.
585 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
586 really change anything, but is the beginning of doing it *right*.
587 To do it completely right the LastWritten date must be passed to
588 the SD, but it is not yet done.
589 kes Minor tweaks to some bat restore SQL.
590 kes This patch fixes bug #1003 where putting the message output from
591 a Verify job into the catalog results in a recursive loop. The problem
592 seems to show up only with postgresql (to be verified).
593 kes Correct %x to %p in postgresql debug statement.
595 kes Fix bug #942 where lots of emails where generated when the heartbeat
596 interval was low and Bacula wanted a different tape from the one in
599 ebl Add new SD despooling attributes and Dir inserting attributes
600 job status codes in the catalog (Status table).
602 ebl Use qmake-qt4 instead of qmake when available (debian system).
604 kes Add a security warning to src/cats/make_catalog_backup.in indicating
605 that passing the password via the command line (arg 3) is insecure.
606 This responds to bug #990 (it doesn't fix it).
608 kes Set default debug_level to zero. This corrects bugs #991 and #993.
609 kes Fix a crash in bat when it cannot connect to the Director for example
610 if the Director is not running.
611 kes Remove redundant INDEX (JobId) from File table in the trunk.
613 kes Make explicit exception to GPL in LICENSE to permit linking
614 the Win32 FD with Microsoft VSS code.
615 kes Apply the Solaris package patch from
616 Masopust, Christian <christian.masopust@siemens.com>
617 kes Apply the patch to optionally add a timestamp in the debug output
618 submitted by Mariusz Czulada <manieq@wp.eu>.
620 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
621 backend (sql_strerror). Fixes bug #989
623 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
624 It applied with no problems.
625 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
627 kes Redirect stderror to stdin on mt status command in mtx-changer.in
628 since the status is returned on stderr on Solaris.
629 kes Activate Close button on tray-monitor window. This fixes
631 kes Check for NULL item in parse_conf.c before calling it. In the
632 case of Device, there is no item and this caused a seg fault when
633 Device appears in the conf file.
634 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
635 avoids pulling in config.h multiple times in some new code.
637 kes Fix spurious warning message printed when creating a volume with
638 a LabelFormat. This fixes bug #976.
640 Release Version 2.2.5
642 kes Add JobId in place of Job name in all the Jmsg() output.
643 kes Correct the APP_DESC for the Win32 storage service (remove an e).
645 kes Make maxvol-test and new more strict maxvol2-test work.
646 kes Print JobId in all Jmsg() job output.
648 kes Add new SD despooling attributes and Dir inserting attributes
649 job status codes. This fixes bug 961.
650 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
652 kes Fix doc issue. This fixes bug #963.
653 kes Fix listing performance problems in bat. Pointed out by
655 kes Remove old debug code.
656 kes Fix bat code that tests for Win32. This should fix bug #968
657 kes Query 5 list wrong Vol after migration. This fixes bug #960
659 ebl Fix #969 where user can't change Replace option in restore menu.
661 kes Save jcr in thread specific data (tsd) for each thread.
662 kes Make Dmsg() print JobId as -%u.
663 kes Make Jmsg, Emsg, and others automatically pickup the jobid
664 for the thread if it exists.
665 kes Remove old reservation debug jid code.
666 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
667 ebl Add an option that permit to specify spool size in job
668 definition. (Applying patches/testing/spoolsize_per_job.patch).
669 You must upgrade SD and DIR at the same time.
670 dvl Add new configuration item --archivedir
671 dvl Adjust regression tests to use tmp not /tmp. This will allow
672 multiple concurrent runs of the regression tests.
674 kes Fix race condition that drops final block written to volume.
675 This happens in rare cases with multiple simultaneous jobs
676 when the Volume fills. This fixes bug #964. May be related
677 to bug #935 and possibly #903.
678 kes Eliminate more strerror() and replace with bstrerror().
679 kes Remove BSD getopt and replace with unrestricted IBM version.
680 kes Fix Win32 build for changed calling sequences.
681 kes More tweaks to the mount volume routines to get everything
682 right. Changed variable name from find to have_vol, which is
683 much easier to understand.
684 kes Enhance btimer debug code.
686 kes Fix FD->SD authorization failure, which was due to spurious
687 wakeups from a pthread_cond_timedwait(). Simply check the
688 predicate before continuing. This fixes bug #953.
689 kes Add const char where needed (more to do). Remove temp debug code.
691 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
692 kes Don't overwrite error message in check_tables_version.
694 kes Unlock batch insert tables with same calls used elsewhere.
695 kes Allow starting 59 jobs a second.
696 kes Make SD session key more random.
697 kes Add retry for SQLite opening db if it fails. Probably helps
699 kes Suppress extra error messages during batch insert failure.
701 kes Add jcr to timer packets so if killed message can be sent to job.
702 kes Add JobId to all Dmsg() output.
703 kes Put some FD auth code on dbglvl rather than fixed.
704 kes Return insert attributes error message in db msg buffer to avoid
705 false error messages. Helps fix bug #966.
706 kes Separate batch init error messages. Probably helps fix bug #966.
707 kes Make SD code that contructs attribute insert check string lengths
709 kes If Dir gets an error during inserting attributes, cancel SD.
710 This reduces unnecessary error messages.
712 kes Correct search boolean for getting Volume info
713 ebl Cleanup batch insert code. Probably fixes bug #965.
714 kes Back out one small change to the reservation system (reserving a volume).
715 kes Rework how a Volume is mounted. It is now much more intelligent and
716 will always attempt to use any mounted volume if possible and reduces
717 calls to the Director asking about volumes.
719 kes Turn off some code when batch insert not enabled.
720 kes Edit FD name in connect error messages.
721 kes Rework the reservation system to take into account that the Director
722 might give us a Volume that is different from the current one being
723 used, and to ensure that we don't exceed Maximum Volume Jobs.
724 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
725 fatal error with multiple jobs running'
726 kes Add more debug code in reservation system.
727 kes Implement maxvol-test to check bug #947.
729 kes Add code to handle tray monitor separated from Win32 FD.
730 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
732 kes Add missed return in fixing verify bug -- trunk only.
733 ebl Fix a command parser issue causing a director segfault.
734 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
736 kes Increase the max block size to 4MB fixes bug #957.
737 kes ERABT if user sets min block size > max block size. Fixes bug #956.
738 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
739 is not properly mounted (recognized) during a poll.
740 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
741 Job that has differences reports Verify OK.
742 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
744 ebl Add an option to operate on all pools with update vol parameters.
745 This complete the project 20. Patch from Nigel Stepp.
746 ebl Add history support to bconsole when using readline.
747 Using Ctrl-D to exit doesn't update .bconsole_history
748 kes Modify new volume algorithm to use max MediaId for generating next
749 volume number rather than the count of Volumes. This should essentially
750 eliminate the failure rate if some volumes were deleted. Bug #921.
751 kes Begin implemention of Optimize Job Scheduling.
752 kes Implement restore callback that Dirk and I agreed on for bat
753 restore. This fixes bug #928. Restore of backup of zero files fails.
754 kes Fix SQL Catalog logging which broke with new db_escape_string
757 Release Version 2.2.4
759 kes Fix bacula_cats.def for new db_escape_string().
760 kes Increase size of name string when FD making connection to SD.
761 May fix bug #953. FD->SD connection failure.
763 kes Add code to help Dan debug 2drive-incremental-2disk test.
764 kes Add code to try to fix bug #908.
765 kes Add waits to multiple exit detection code to try to force pid
766 file to always be deleted.
767 kes Restore good dev.tar.gz to rescue set appropriate binary property.
769 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
770 trying to switch drives by checking for blocking before unblocking.
772 kes Cancel storage daemon in all cases where FD reports error. This
773 should fix virtually all cases of bug #920.
774 kes Fix db_escape_string() for MySQL which did not compile.
776 kes Fix error message that was clobbered when Dir tells SD it does not
777 have write permission on Volume. This should fix a minor point
778 in bug #942, but not the main problem.
779 kes Add code to cancel job in SD if FD connection fails. This should
781 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
782 dvl Pass jcr and db into db_escape_string() to enable better escaping
784 kes Fix migration code to get correct Volume name with multiple volumes
785 by skipping |. Fixes bug #936.
786 kes Implement patch supplied by Landon to fix bug #944 where using
787 TLS with bconsole uses 99+% of the CPU.
788 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
790 kes Move patches into patches directory.
792 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
795 ebl Using 'm' in bconsole will show messages like before,
796 and not memory usage.
797 kes Fix bug #935, and probably also bug #903 where files were not
798 restored. MediaId was not properly set in JobMedia record after
801 kes Suppress chown and chmod error messages if the FD is not running
804 kes Apply Martin Simmons' patch that should turn off the new API usage
805 when batch insert is turned off allowing building on older
807 kes Add ./configure search in qwt-qt4 for qwt package
809 kes Bacula is now free of 3rd party GPL copyrighted code!
811 kes Add guid_to_name.c/h which replace idcache.
812 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
814 ebl Detect if new PosgreSQL batch insert API is present.
815 kes Correct incorrect mempool call causing Director crash. Occurs on
816 systems without va_copy().
817 sb Update spec files for 2.2.1 release
819 kes Fix memory pool call in ua_output.c. bug #934.
820 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
821 Add test program to fnmatch.c
823 kes Integrate patch to README.vc8 from
824 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
825 edit it to get it into Unix patch format.
826 kes Implement mkpath.c to replace old FSF makepath.c
828 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
830 Release Version 2.2.1
832 kes Update POTFILES.in
833 kes Cleanup a few underquoted AC_DEFUNs in configure
834 kes Apply patch from Martin Simmons that adds a test for va_copy to
837 kes Fix bug #921 by increasing the number of tries to create a new volume
839 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
840 can be called multiple times. Implement a version for machines
841 without va_copy() that gets a big buffer.
843 kes Integrate more portable zone offset code into bsmtp.c
844 Submitted by Attila Fülöp.
846 kes Fix bad SD->FD return status reported by
847 (James Harper) <james.harper@bendigoit.com.au>
848 ebl Fix a bug in read_close_session which return random status
849 thanks to James Harper
851 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
852 and directory names during restore of single file/directories.
853 kes Add sanity checks to .sql command when string is empty. Hopefully
854 that will resolve Dirks Director crash.
856 kes Apply patch submitted by Martin Simmons that corrects a seg fault
857 in the bsmtp chat subroutine when debug is >= 10.
859 kes Fix Director crash when running bat SQL queries.
860 kes Add David's notes on Item 8: Copy pools.
862 kes Rework projects file to be current and ready for a vote.
863 kes Enhance lex scanner error message.
865 kes Tweak LICENSE file to mention BSD code.
866 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
867 if specified on the ./configure.
868 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
869 This class is intended to allow us to open a second bsock to the
870 Director while in the restore subdialog.
872 kes Fix configure to create bat Makefile before creating dependencies.
873 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
874 kes Add a tooltip to the tray monitor.
875 dvl Set the Director's PID file before dropping privs. This fixes
878 kes Update AUTHORs file
879 kes Increase the default max concurrent jobs to 20 in FD and SD to
880 correspond with the default .conf files.
881 kes Rewrite the Win32 service routines. This eliminates the 3 copies
882 some different, of the same file created by RN when porting the
884 kes Rearrange some of the Win32 directories and the placement of the files
886 kes Set DEVELOPER flag in version.h
888 ========================================================================
889 Release Version 2.2.0
891 kes Apply a second doc patch from Marc.
892 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
893 improves the tips section that discusses how to setup multiple
896 kes Update bat README file.
897 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
898 corrects a typo in the Recycle status check in db_find_next_volume().
899 This will probably fix a number of annoying problems with multiple
901 kes Modify most of dird/msgchan.c to use bsock class calls rather than
902 bnet calls -- no functionality change.
904 kes Modify the Verify output to specify if files are missing on
905 the Volume(s) or disk. Fixes confusion in bug #916.
906 kes When more than one Volume is read in a migration job, the last
907 Volume bytes reported are from the last read volume rather than
908 the last written volume. Fixed. This fixes bug #910.
909 kes Fix display of Recycle flag after update volume=foo recycle=yes.
910 It previously printed New Recyle flag is: no. This fixes bug
913 kes Correct seg fault when switching tape drives during restore.
914 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
915 be used until after 2.2.0 release.
917 kes Remove fnmatch() in SD that permitted wild card specifications.
920 kes Fix %g in filename returned by SQL for browse tree reported by
922 kes Fix configure so that it puts config.out in the cwd rather than
924 kes Attempt to fix the locking problem reported by Eric in bug #906.
925 kes Make berrno class to leave errno unchanged after constructor call.
926 kes Make bnet_server use the heap rather than the stack to allocate
927 its socket fd pointers to avoid a crash at termination. Problem
928 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
930 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
931 and putting it in depkgs-qt along with Qt4.3.
933 kes Rework code in acquire.c that switches drives for reading when
934 the Media Type does not match. This should fix bug #906
936 ebl Fix a director segfault during job setup #907
937 kes Correct seg fault in postgresql when first operation returns no
938 rows. Fixes Dirks File browser problem seg fault with bat.
940 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
941 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
944 kes Implement PopUp YES/NO dialog for bat.
946 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
948 kes Correct RunScript to terminate job in FD on failure.
949 kes Change abort_on_error and AbortJobOnError to fail_on_error
950 and FailJobOnError in RunScripts.
951 kes Minor tweaks of code formating in RunScripts, principally to
952 avoid depassing 80 columns.
954 kes Eliminate one #ifdef Win32 in bsmtp
955 kes Implement grow tool to grow a file for testing very large databases.
956 kes Add big-vol-test to test Bacula seeking with > 5GB.
959 kes Modify find_next_volume() to return all values in Media record.
960 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
964 kes Update Release notes
966 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
967 Warning, in previous beta version, all media get from scratch keep their
970 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
971 This should fix bug #842. Made a note to look at removing the temp
972 files at the end of the install.
973 kes Add ability to mount and unmount a file device providing it is
974 marked as being removable and has the appropriate mount and unmount
975 commands defined in the Device resource. This fixes bug #830.
976 kes When applying a storage override, release all previous storage
977 definitions rather than just prepending the new storage.
978 This should prevent a good deal of confusion.
980 kes Implement ./configure search for qwt libraries.
982 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
983 Win32 FD. This should fix bug #893.
984 kes Remove an unnecessary beep in Win32 init code.
985 kes Update copyright dates in Win32 executable about boxes.
986 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
987 code with a BSD getopt.c and getopt.h.
988 kes Remove sched.h from the Win32 compat directory -- not used.
989 kes Remove the Exit menu item from the Win32 tray monitor. If you really
990 need to shut it down, do it through the services panel or the command
992 kes Remove some inappropriate Bacula FSFE copyrights.
993 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
994 kes Fix regress config non-portable test as pointed out by
995 Florian Heigl <florian.heigl@gmail.com>
996 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
997 as pointed out by Florian Heigl <florian.heigl@gmail.com>
999 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1000 Reported by Frank Sweetser.
1004 kes Fix client-only build.
1005 kes Integrate client-only fixes for bsys (initgroups) and conio from
1006 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1007 kes Make arguments to get_scratch_volume() in same order as other
1009 kes Rework the prune_volumes() subroutine so that after purging and
1010 no volume found in desired pool, it will check for a scratch
1011 volume. This prevents recycling the whole scratch pool.
1012 kes Add code to status storage to print boffset_t (largefile support).
1014 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1015 kes You now need a --with-qwt=<dir> to be able to build bat.
1016 kes Update src/win32/cats/bacula_cats.def to include the new
1017 db_get_query_dbids() call on Win32.
1019 kes Correct a problem when selecting a scratch volume and moving
1020 it to another pool that lost some columns.
1021 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1022 kes Enhance Autochanger error messages to include Volume and device name.
1023 kes Rework prune_volumes() code to take account of InChanger flag,
1024 and to handle recycling volumes going to the Scratch pool and
1025 current pool because the RecyclePool directive.
1026 kes Implement a better and more efficient db_get_query_dbids() to
1027 handle creating and passing back a list of DBIds.
1031 kes Start work on new more efficient DBId subroutine. First use
1032 will be for recycling volume to Scratch inchanger.
1033 kes Increase number of JobIds in pruning from 1000 to 10000.
1034 This to be replaced by above routine.
1035 kes Begin implementation of building Qt4 on Win32.
1036 kes Correct typo in fix I added for bad TLS shutdown.
1037 kes Pull 2.0.3 patches into patches directory.
1038 kes Update Release notes. Include qt-console in line count.
1039 kes Update Projects file.
1041 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1042 bug in migration code where a job that spanned two volumes
1045 kes Implement new BST_DESPOOLING blocked state. Change from locking
1046 during despooling in SD to blocking. This means that other threads
1047 can work with the device structure, in particular the reservations
1048 system while despooling.
1050 kes Fix return in reservation message queue that missed clearing
1051 the jcr lock (implemented 26Jun07 below).
1052 kes Rename a number of dev methods to make locking function names
1054 kes Document locking in lock.c. Move lock structures to new file
1057 kes Move reservations message lock to lock jcr only this
1059 kes Move main SD locking code into lock.c (new file).
1060 kes Update Win32 build to include lock.c
1064 kes Dirk committed the qwt library code for drawing graphs in bat.
1065 kes Tweak install of qwt so that it is integrated with ./configure.
1067 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1068 out by Eric (my typo).
1069 ebl Fix configure.in to get batch mode enable
1070 kes Return correct string from authenticate.cpp in bat when connecting
1072 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1073 spurious line drops when using TLS.
1074 kes Do not file reparse points when restoring a file that already
1077 kes Implement Windows reparse points -- similar to directories, but
1078 we do not descend into it. This is a first cut. They seem to
1079 be backed up, but restore is not yet tested.
1080 kes Remove restore_blocking in tls code when shutting a socket to leave
1081 it in blocking mode. Hopefully this will fix the encryption bug
1082 reported by Frank Sweetser.
1083 kes When opening a file for backup, tell the OS that we are going to
1084 read it sequentially -- optimization.
1085 kes Change variable names in authenticate_director() to not conflict
1086 with member names in bat. Caused great confusion with compiler,
1089 kes Queue openssl error messages in case of comm problem.
1090 kes Do shutdown() call if socket terminated.
1091 kes Remove some duplicated code in tls.c
1092 kes Move more of the bsock member variables into private and access
1094 kes Add Frank Sweetser's tls-test to the regression suite.
1096 kes Add Swedish sv.po file
1098 kes Don't print clock skew message in FD if less than 3 seconds diff.
1099 kes Add a bit of VSS info to status client.
1100 kes Implement a first cut of Vista VSS, using Win2003 code.
1102 Release: 2.1.20 beta
1104 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1105 loaded tape but uses first drive).
1106 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1107 This was indeed a Win32 issue.
1109 kes Simplify search of autochanger for in-use Volume.
1110 kes Fix exit condition of check for in-use volume. kes Remove
1111 inappropriate my_postgresql_free_result() in db_close()
1113 kes Fix bad return in FD when encryption signature not found.
1114 Probably caused a crash.
1115 kes Inhibit missing encryption signature error messages for
1116 file types where no signature computed.
1117 kes Correct inverted check on autochanger in reservation system.
1118 kes Tweak debug code in autochanger reservation.
1120 kes Add some additional locking in the cats directory in subroutines
1121 that modify packet variables called from batch insert.
1122 kes Rework how dcrs are allocated. new_dcr() can now be called
1123 with an existing pointer, and it will simply clean it up.
1124 This allows the reservation system to test various different
1125 devices, and will permit easy device changes.
1126 kes A bunch of changes all over to handle new new_dcr() calling
1128 kes Work more on the Volume management in the SD. Remember Volumes
1129 for tape drives and for autochangers (even virtual disk changers).
1130 kes When looking at the Volume list to reserve a drive, handle
1131 autochanger names correctly by interating through the changer
1132 devices. Also call the Director to see if a Volume is suitable
1133 for the current job.
1134 kes Fix some bugs in bscan. Make sure all media records are written.
1135 Make sure that valid JobMedia records are written for disk files.
1136 Previously they were completely wrong.
1137 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1138 that the URLs don't change and so that the developers will all
1139 work off the same copy. Rebuild from scrach.
1140 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1142 Release: 2.1.18 beta
1144 kes Fix seg fault in FD from incorrect digest size.
1145 kes Fix argument to non-OpenSSL crypto.c subroutine.
1147 Release: 2.1.16 beta
1149 kes Remove a few malloc()s from the encryption code.
1150 kes Use the class calls to bsock in filed/backup.c and restore.c in
1151 place of the old bnet_xxx code.
1152 kes Implement code that does an on the fly calculation of the
1153 signing digest during restore of encrypted files. It makes
1154 a best guess at the algorithm, and if it is not correct, will
1155 then revert to the old code which reads the file after it is
1157 kes Implement at least one missing crypto stream in stream_to_ascii()
1158 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1159 #877 where a reload with bad syntax causes Dir to exit.
1161 Cut: 2.1.14 beta (not released)
1163 kes Do not free a volume on a tape drive until another volume is
1164 mounted and read, or the autochanger unloads the volume.
1165 This should help the SD re-use volumes that are already mounted,
1166 and should fix bug #886.
1167 kes Apply patch from user brettedgar that allows gnome2-console include
1168 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1169 kes Apply patch from Lucien Weller that fixes day of week calculation
1170 because of DST flag problem. Fixes bug #887.
1172 kes Move find_next_appendable_volume() to after acquiring a valid device
1173 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1175 kes Unable to reproduce bug 872. However added additional testing for
1177 kes Bug #874 resolved by documenting SQLite limitations.
1178 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1179 kes Bug #881 resolved by removing typo in mtx-changer script.
1180 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1181 approval. Added a link to the wiki on the web page, and implemented
1182 a backup from http://paramount.ind.wpi.edu
1184 kes Fix update allfrompool to pass pool name.
1186 kes Convert to pure GPL v2 license.
1187 kes Fix sscanf problems reported by Peter Buschman that caused
1188 a bus error on Solaris.
1189 kes Rework (simplify) the select prompt in bat.
1190 kes Move get_jobid_from_tid() into lib and create a
1192 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1193 should definitely fix the problem of lost error messages in the
1195 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1196 kes Eliminate tcpd.h from the project. Enclose the #include from the
1197 library with extern C ...
1198 kes Add print of signal name when a signal is trapped.
1200 Release: 2.1.12 beta
1202 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1204 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1205 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1206 makes SQLit3 run 30 times faster, though a bit less safe.
1207 kes Implement --with-batch-insert in configure and detection of thread
1208 safe libraries. It is on by default, but turned off if no thread
1209 safe library (e.g. SQLite 2) is available.
1211 kes Fix Bacula PostgreSQL buffer overruns.
1212 kes Do better checking for NULL results returned from PostgreSQL;
1213 implement retry for failed queries; clear results buffer after
1214 failed query. Hopefully this will correct the PostgreSQL failures.
1216 kes Implement algorithm to handle only one appendable volume with
1217 Prefer Mounted Volumes = no.
1218 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1219 returned from a query.
1220 kes Make volume lock recursive.
1221 kes Implement an additional volume reservation algorithm that
1222 starts by considering all reserved volumes then uses the
1223 old brute force algorithm of searching the resources to
1224 find a suitable device.
1225 kes Add new reservations debug code and refine the old code.
1226 kes Update the win32/dll/bacula.defs file.
1228 kes Tweak reservations algorithm to permit a few more cases, i.e.
1229 volume reserved, but on different drive, ...
1230 kes Enhance SD status to include Pool and Media Type for drive in a
1231 more readable format (a bit longer).
1232 kes Fix PostgreSQL double free.
1234 kes Minor refactoring of restore decryption code.
1235 kes Add code to smartall.c to detect double free of a buffer.
1237 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1238 so that bsmtp will create a correct email address (mailbox only).
1239 kes Modify 'memory' command so that the buffers are listed as 'In use'
1240 to avoid confusion with Orphaned buffers.
1241 kes I reworked the OpenSSL include/lib flags to be handled in
1242 the standard Bacula way, which should fix bug #863 concerning
1243 non-standard OpenSSL libraries.
1245 kes Implement Help Browser window for bat.
1246 kes Fix reload bug that reset StorageId to zero.
1248 kes Fix TLS #ifdefing when TLS turned off.
1249 kes Ensure that when labelling a tape with Slot=0 that InChanger
1251 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1253 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1254 add DISTINCT (required by PostgreSQL).
1255 kes Implement BSOCK authenticate_director() method. Eventually will
1256 authenicate all daemons.
1257 kes Move several more functions into the BSOCK class.
1259 kes Add code to tell the OS that we no longer need a cached
1260 file that we were reading. In findlib/bfile.c. Also,
1261 only cache files that we are reading. Thanks to
1262 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1263 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1264 kes Implement script to automatically generate cats and dll .def
1265 files for Win32 dll.
1266 kes Update README.mingw32 to include new .def file generation.
1267 kes Correct typo in UTF-8 error message as reported by:
1268 jhernandez <julianhernandez@gmail.com>
1269 kes Add additional sm_check() code on debug level 1.
1270 kes Set default debug level to 1.
1271 kes Trap SIGABRT in attempt to get traceback.
1273 kes Reduce bat connect timeout from 30 to 15 seconds.
1274 kes More restructuring and implementing BSOCK class in place of
1276 kes Remove a few unnecessary malloc() tests in crypto code.
1277 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1278 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1279 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1281 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1283 kes Fix Verify InitCatalog. The attributes were not pointing to the
1284 correct saved location.
1285 kes Implement message callback so that GUI is sure to get all
1286 daemon messages. Currently displayed in a dialog in bat.
1287 kes Ignore SIGUSR2 (Bacula timer) in bat.
1288 kes Apply regress patch from bug #859 to allow regress to work
1289 with Solaris compiler.
1291 kes Begin adding TLS support to bat.
1292 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1293 clean up lex.c and make it more readable.
1295 kes Move more bnet functions into the BSOCK class.
1296 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1297 kes Complete change of berrno strerror() method to bstrerror()
1299 Release: 2.1.10 beta
1301 kes Cleanup incorrect email addresses in bsmtp.
1302 kes Make bat display initial messages rather than discard them.
1304 kes First cut of adding .mod to the run command.
1305 kes Implement auto display of messages in bat.
1306 kes Enhanced preferences to allow all Bacula output to be
1309 kes Try to make bsmtp date routines more generic.
1310 kes Fixed bug #856 autochanger documentation.
1311 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1312 kes Add new cats entry point so Win32 builds.
1314 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1316 kes Do better checking for the MySQL 64 bit libraries looking for both
1317 .a and .so libraries.
1318 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1319 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1320 kes Require the thread safe version of MySQL during configure. Thanks
1321 to Andre Noll for pointing this out.
1322 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1323 continuing in migration code.
1324 kes Apply implementation of tray-monitor font derived from gnome-console
1325 submitted by Andreas Piesk <a.piesk@gmx.net>
1327 kes Eliminate important memory loss in SQLite
1328 kes Fixed the batch insert MySQL thread specific data that was not
1329 being freed. See cats/mysql.c:db_thread_cleanup().
1330 kes Fix restore before command.
1331 kes Convert old hdr.name to name() in a few places.
1332 kes Implement update jobid command.
1333 kes Return all time_t dates in db_get_job_record()
1334 kes Stop watchdog in SD earlier.
1335 kes Put Pool just after Storage in please mount message.
1336 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1339 kes Update the po files.
1340 kes Fix Verify InitCatalog by making it cache attributes.
1342 kes Change name bacula-bat to bat for man 1 page to correspond to
1344 kes Check for client and store NULL pointers in status command. This
1346 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1347 kes Fix sign extended editing of %p.
1348 kes Clean out a little old #ifdefing in cats/mysql.c
1350 kes If time diff between DIR and FD is more than 600 seconds convert
1351 INFO message to WARNING.
1352 kes Implement heap size display in status for all daemons.
1353 kes Attempt to fix MySQL db open memory loss (not successfull).
1354 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1355 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1356 Query. This looks like a MySQL but but by doing extra releases,
1357 the memory goes away. This should fix bug #847.
1359 kes When backup fails, cancel SD before waiting for sd termination.
1360 kes If SD is waiting for FD to connect during cancel, wake up the
1362 kes Fix fsf code so that errno is correctly reported.
1363 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1365 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1366 so that Bacula doesn't later stumble into a seg fault.
1367 kes Use the term Restore Client in the restore Job report.
1368 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1369 the original job's FileSetId.
1370 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1371 spooling in migration jobs. Not yet tested.
1372 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1373 reading conf file from a pipe. However, do it with open_bpipe()
1374 rather than popen. Not yet tested.
1376 kes Fix an ugly bug where the VolCatBytes were getting updated
1378 kes Implement bconsole memory command that prints current memory
1379 usage, plus smartalloc dump.
1380 kes Clarify some error messages in backup, admin, and migrate.
1381 kes Shrink label dialog to smaller size.
1382 kes Invert Cancel OK buttons on restore to be OK Cancel.
1383 kes More strerror() to bstrerror() conversions.
1385 kes Start implementing bstrerror() in place of strerror().
1386 kes Stripping path -- seems to work.
1388 kes Prevent door and port files from being restored (mostly
1390 kes Free an unreleased buffer in compat code.
1391 kes Change console Job name from *Console* to -Console- to eliminate
1392 Win32 filename problems. Put Win32 path separator when creating
1393 Console file. This fixes bug #846.
1394 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1396 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1398 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1399 to force Win32 error message.
1401 kes First cut strip path. The data should be passed to the FD,
1402 but nothing is done with it yet.
1403 kes Enhance the digest and signature routines in the crypto
1404 library to accept a JCR and to use it to print error messages
1405 so that they will go in the Job report rather than the daemon's
1407 kes Simplify some of the verify signature code.
1408 kes Simplify a few of the alternative returns in the signature
1411 ebl Use only POSIX regex instead of GNU regex in breg.c for
1412 File relocation. It fix broken freebsd compilation.
1413 kes Convert all other Dir files to use new ua class message
1415 kes Tentative fix for missing digest signature in bug 807.
1416 kes Correct handle problem in new win32_ftruncate routine.
1417 kes Convert ua_purge.c and ua_update.c to use new ua class
1418 message routines for bat.
1420 kes Correct incorrect installation of LICENSE in Win32 installer.
1421 kes Display LICENSE at the beginning of the Win32 install.
1422 kes Attempt to correct the need for the png files to be installed
1424 kes Reapply my bat.conf install script in qt-console. I think I
1425 editted bat.pro instead of bat.pro.in and it was lost.
1426 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1427 the /var/lock/subsys for subsysdir. Also corrects typos in the
1430 kes First cut update job.
1431 kes Correct configure to include qmake of src/qt-console directory.
1433 kes Make restore job yes/mod/no print in one command so GUI works.
1434 kes First cut implementing backup and restore client.
1435 kes Correct editing in Verify output that caused a seg fault.
1437 kes Insure that bat.conf is not overwritten during installation.
1438 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1439 while I was implementing migration in March 2006 !
1441 ebl Cleanup file relocation, using char *RegexWhere instead of
1442 char *where + bool where_use_regexp
1443 kes Update some manpages and add bat manpage.
1444 kes Make a first cut at converting bacula.spec.in for bwx-console
1446 kes Apply patch from John Goerzen to add hostname as fourth argument
1447 to make_catalog_backup script.
1448 kes Fix typos I introduced into bsmtp.c
1449 kes Make pm_strxxx() routines handle input of NULL pointer. This
1450 is to protect from NULL pointers returned from SQL databases.
1451 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1452 kes Add more debug to FIFO code -- fix fifo regression test.
1454 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1455 kes Add thread timer to bnet_connect() to break from OS if wait time
1458 kes Update Win32 build to include new files, new symbols, and
1460 kes Implement socket level heartbeat (tcp_keepidle)
1461 ebl Commit File relocation patch
1462 kes Make bat have 'make install' target.
1463 kes Warn during install if old gnome-console binary found.
1464 kes Warn during install if old wx-console binary found.
1465 kes Add -8 option to bsmtp command line to add content type utf-8.
1466 Fixes bug #809. (Character coding problem in bsmtp).
1467 kes If < is found in target (from, to, cc) then do not enclose the
1468 target in < > in bsmtp. Fixes bug #772 (malformed address).
1469 kes When printing certain items in dbcheck, stop after 300000.
1470 Fixes bug #822. (dbcheck loops).
1471 kes Incorrect status in Dir after waiting for mount with poll set.
1474 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1476 kes Print waiting to reserve a device every 5 mins.
1478 kes Don't call close_part in label.c if tape and relabel.
1479 kes Don't free volume if busy in close() -- should help with
1481 ebl Fix #824 RunScript bug (After script could be execute twice)
1482 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1483 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1484 Add a regression script to test RunScript
1486 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1489 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1490 deprecated. No additional bugs will be fixed, and they will be dropped
1491 in a future release (probably 2.4.0).
1492 kes Change name of wx-console to bwx-console to make it more Bacula
1494 kes Change the name of gnome-console to bgnome-console to make it
1497 kes Some time in March, a Feature Request with patch from Jorj Bauer
1498 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1500 The ability for the director to validate a Client (FD) CN against
1501 an arbitrary set of patterns rather than the hostname, with
1502 A new 'TLS Allowed CN' set of directives which are implemented
1503 in the Client resource. Then pattern matching is used in place
1504 of hostname matching against the Certificate's CN. As an example, we
1505 have certificates which (a) use a local CA, and (b) have a CN of the
1507 kes Add new/changed entry points to Win32 build
1508 kes Create unaccepted-projects for projects that are not accepted.
1509 kes Simplify locking in the reservations system.
1510 kes Add more debug code in reservations.
1511 kes Make sure error condition on reserving a volume is handled correctly.
1512 kes Correct handling of volume_in_use.
1513 kes Correct handling of initializing a device.
1514 kes Move handling of broadcasting releasing a device into release_device().
1515 kes Correct attaching dcr to dev so that it is only done if device
1516 is properly initiated.
1518 kes Locking debug level tweaks in SD.
1519 kes Tweak new Volume code.
1521 kes Add exec external-command [wait-seconds] to bconsole. This
1522 executes the external-command. Note! normally external-command
1523 should be enclosed in double quotes.
1524 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1525 it should normally be off in a production system.
1527 kes Implement die command for SD so that we can force it to dump.
1528 kes Implement SD lock debug code.
1529 kes Implement new algorithm for keeping Volume list in SD. It
1530 is now owned by the device.
1532 kes Implement new code for freeing in use volumes that should
1533 resolve if not all, some of the problems of multiple drive
1534 tape conflicts described in bug 801.
1536 kes Fix gui/bacula-web/images files in svn.
1537 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1539 ebl Fix a bug in batch mode (in string escape)
1540 kes Correct migration prune SQL typo that crept in in a
1541 recent 2.1.x change.
1543 kes Move bnet_despool() into class in bsock.c
1544 kes Modify job report to include director name and Build OS.
1545 kes Move drop root privilege and check_catalog() before fork.
1546 kes Add update database scripts (version 9 to 10) to updatedb directory.
1548 ebl Check size and age of each file after its backup to see if
1549 it has changed during backup, if 'checkfilechanges' is set.
1550 The FD will do an extra check (stat(2)) after
1551 each file backup. mtime, ctime and size are compared with
1552 'before backup' information. If time or size mismatch, an
1553 error message will be generated. You must upgrade FD to use it.
1555 kes Make database name and user configurable
1556 --with-db-name=xxx --with-db-user=xxx
1557 kes Add back database type to message.c for debugging.
1559 kes Implement dir_sql() which issues an SQL query.
1560 kes Modify bat medialist to use dir_sql() and do some minor C++
1561 formatting as well as eliminating a number of pointers, simplifing
1564 kes Fix some of the mtx-changer grep commands for tape label readers.
1565 kes Convert a number of bsendmsg into the appropriate send/warning/error
1566 message class calls.
1567 kes Suppress the using database message in the .sql command.
1568 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1570 kes Add context menu for floating a window.
1571 kes Some minor cleanup and name changes in qt-console
1572 kes Add doing mt setblk 0 in Win32 mtx-changer.
1573 kes Apply Martin's bug fix to move definition of ENODATA for
1575 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1576 sqlite2 and sqlite3.
1578 kes More pruning cleanup.
1579 kes Turn on wait_for_drive by default in mtx-changer.
1580 kes Turn on Batch insert code by default as it now passes regression.
1581 kes Add ./configure --enable-bat to enable building of Bat.
1582 No install yet though.
1584 kes Implement a new .sql command for bat.
1585 kes Implement code to turn off pruning in obtaining the next volume.
1586 Pruning is turned off for the status dir command, but turned on
1587 for SD requests and for the list nextvolume command.
1589 kes Correct Qmsg() that was not updated correctly when committing a
1590 previous change (probably the recent TLS patch).
1592 kes Write new subroutine is_volume_purged() that explicitly checks
1593 if the Volume is purged, and if so marks it as such. This should
1594 resolve problems reported about needing to mount twice to recycle
1596 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1597 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1598 amount of duplicated code.
1599 kes Do volume pruning only for the Media Type desired (reduces pruning time
1600 if multiple Media Types are in the same pool).
1601 kes Implement more detailed info in the Job report for the Bacula version
1603 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1605 ebl Add bbatch tool to bench database and insert mode.
1606 Fix sql quote stuff in batch mode
1607 Fix sql stuff for mysql
1609 kes Correct problems with am/pm scheduling. Fixes bug #808.
1610 kes Implement new prunning code that prunes up to 1000 jobs at
1611 the same time. The same technique can be applied to a number
1612 of other prune/purge subroutines.
1613 kes Add an insanity check when starting a new tape job to ensure
1614 that the tape position has not been changed. If so fail the
1616 kes Fix Win32 build for dlls to add the folllowing:
1617 src/lib/bsock.c -- new file with new entry points
1618 src/lib/dlist.c -- new entry points
1619 src/cats/sql_create.c -- new entry point
1620 src/cats/sql_cmds.c -- new DATA item exported
1622 ebl batch mode cleanup bscan-test is ok now.
1623 kes Implement SD code to check length of disk volume before appending.
1625 kes Correct return status on db_batch... routines.
1626 kes Add call to db_write_batch_file_records() to migration code.
1627 ebl Fix AfterJob timing
1628 kes Move the checking of the database in initializion of the Director
1629 to after we drop privileges. This avoids the need for both root
1630 and bacula access to the DB.
1631 kes Correct a misplaced variable definition in src/filed/backup.c
1632 kes Correct how the new batch insert db_create_attributes_record()
1633 uses the arguments. Caused a seg fault in bscan.
1634 kes Implement lock() and unlock() methods in DEVICE class.
1635 Implement block() and set_block(xx) methods in DEVICE class.
1636 kes Modify bnet_connect() so that it uses time() to check for the
1637 wait time expiring (on some OSes, some system calls may not
1638 return immediately).
1639 kes Modify Verify to obtain the previous JobId when it is actually
1640 running rather than at schedule time (as it was in 1.38.x).
1641 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1643 kes When checking pid in pid file, continue running if the pid is
1644 the same as ours. This occurs on IRIX after a system crash.
1647 kes Extend new GUI API.
1648 kes Make the ua structure a class, and implement send_msg(),
1649 error_msg(), warning_msg(), and info_msg().
1651 kes Apply fix from for building wx-console on the Mac from
1653 kes Implement new select mechanism for GUI programs.
1654 kes Reorganize initialization of stackedWidgets in bat.
1656 kes Add updated nagios plugin supplied by Christian Masopust.
1658 kes More bat implementation.
1659 kes File migrate bug with Pool Occupancy using mediaid instead
1660 of jobids. Fixes bug #795.
1661 kes Fix orphaned buffers in filed backup and verify due to
1662 crypto buffers not freed during errors. Fixes bug #789.
1663 kes Extend new GUI api code to tree commands.
1664 kes Ensure that tree and dot commands check console ACLs.
1665 kes Permit marking directory with trailing slash.
1666 kes Allow 20 console connections (instead of only 10).
1668 kes Add smartctl call to bacula-sd.conf as an example of getting
1671 kes Modify jobq.c to let simultaneous restore jobs run. This may
1672 cause them to fail if they cannot get a drive.
1673 kes Add Client Connect Wait to Storage daemon to permit users to
1674 modify the time the SD waits for a FD connection.
1676 kes Correct virtual changer check which was backwards. This caused
1677 volumes to be unloaded into slots already occupied.
1679 kes Apply Command ACL filter to JobId list in restore command.
1680 kes Correct typeo in var.c patch.
1682 kes Don't let Bacula prune File or Job records for the current Job.
1683 kes Fix variable substitution pad + inc bug reported (with patch)
1686 kes Correct SQLite log table index as reported by Luca Berra.
1688 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1690 kes Begin implementing new comm signals for API.
1691 kes Fix a few places in lib/message.c where the open fd may
1693 kes Continue implementing lib/bsock.c (real class). Make jcr,
1694 who, host, and port private. There are new methods to access
1695 them for non-class use. This required touching a number of files.
1697 kes Add LANG=C to autoconf/randpass so it works with languages other
1698 than English. Fixes bug #788.
1700 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1702 You will not be able to generate Include/Exclude list any more.
1703 It will be fixed soon.
1704 If you want to use this, you can apply
1705 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1707 kes Restore of sockets created false error messages because Bacula
1708 no longer restores sockets, but the code was still trying to
1709 set the attributes on a non-existent file. Reported by a user.
1710 ebl finish RecyclePool feature
1711 Media will takes Pool.RecyclePool
1712 when moving from Scratch to a Pool or when user will do
1713 update volume=xxx frompool
1714 To use it, add RecyclePool = aPool to your Pool resource
1717 RecyclePool = Scratch
1721 kes Expand new BSOCK class adding signal() and new BNET signals.
1722 kes Begin enhancing the dot commands adding a new API function
1723 that returns more information and will make it easier
1724 to interface to the Director from a program.
1726 kes Make DEVICE fd private. Its new name is m_fd, and can be
1727 obtained with dev->fd() outside the class. This is the
1728 first of many DEVICE members to be made private.
1729 kes Implement Michael Renner's idea on having a virtual disk
1730 changer. I made some minor modifications (e.g. I did not
1731 implement the Virtual Changer directive, but simply set
1732 the Changer Command to an empty string.
1734 kes Implement a BSOCK send() method that writes the whole record
1735 in a single write() request rather than in two.
1736 ebl add update volume=xxx recyclepool=yyyy
1737 volume takes recyclepool from pool when using update volume=xxx from pool
1739 kes Fix encryption deblocking bug, which caused some restored files
1740 to be truncated. This fixes bug #763.
1741 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1742 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1744 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1745 ebl Use btime_t instead of uint64_t in media patch.
1747 kes Optimize the use of the database a bit in the Status dir command.
1748 Only open it when needed, ensure that if any previous database
1749 was opened, it is closed.
1751 kes Correct VolCatBytes bug from media patch.
1752 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1753 in the case of orphaned records.
1754 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1755 and File records in 300K chunks to be more efficient. This
1756 idea came from Juan Luis Frances (if I remember right).
1757 kes Apply Eric's scratch patch that moves a purged Volume to
1758 the RecyclePool. Question: how is RecyclePool set? what
1759 happens to the ScratchPool?
1760 kes Apply Eric's media patch that collects read/write media
1761 times as well as byte counts. This patch requires a
1762 simultaneous upgrade of the DIR and SD. Note, there
1763 should be some way to turn off timing. I'm not sure
1764 times are in Bacula units.
1765 kes Apply Eric's batch-insert patch.
1767 kes Update projects list.
1769 kes Implement Include/Exclude file lists in FD as dlists using
1770 the new dlistString class. This permits efficiently having
1771 large include/exclude lists and completes project Item 25.
1772 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1773 console is authorized to cancel the job. This fixes bug
1775 kes Modify SD so that the VolCatJobs medium record is updated
1776 at the beginning of a Job rather than the end. This
1777 fixes bug #775 where exceeding MaxVolJobs caused jobs
1779 kes Added a mutex around getting and setting Volume information
1780 so that multiple simultaneous jobs will single thread.
1782 Switch to using Subversion
1783 kes Remove src/pygtk-console/ from configure
1785 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1786 plus the entrypoints.
1787 kes Apply patch supplied that corrects debug print
1788 in canceling jobs for max run time. Supplied as
1789 part of bug #621, which was previously fixed.
1791 kes Test on job_canceled() and sd_msg_thread_done inside
1792 loop starting the message thread to avoid a race condition.
1794 kes Remove rl_catch_signal from console.c as it conflicted
1795 with the header definition. Fixes bug #765.
1796 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1798 kes Clarify some stored/acquire messages to indicate if the
1799 problem is with read or append.
1801 kes Fix memory leak with storage ids in cats/sql_get.c
1802 kes Terminate watchdog earlier to avoid reference to released
1803 memory -- reported by Jason Austin.
1804 kes Move closing the database from jobq.c to the director daemon
1805 termination routine. This fixes memory leaks for shadow jobs
1806 (i.e. migration jobs).
1807 kes Free up the unique jobid chain items in migrate.c. This fixes
1808 a memory leak problem.
1809 kes Convert some ugly looking for statements to use foreach_alist
1810 in findlib/find.c. This will facilitate converting the structures
1811 to use dlist (for large include/exclude lists).
1812 kes Fix a bug in the btree.c and btree.h routines, then rename them
1813 rblist and add them to be built in src/lib. Include some new
1814 methods written by Rudolf Cejka that make the code more readable
1815 (hides some of the ugly casting).
1816 kes Add set_next() and set_prev() methods which make the code much more
1817 readable. Also add a new dlistString class that facilitates storing
1818 strings in dlists. To be used in the large include/exclude lists.
1819 kes Make some trivial modifications to lib/tree.h that use rblist
1820 rather than dlist for storing the tree links. This was suggested
1821 by Rudolf Cejka. The result of this is that the restore tree now
1822 uses red-black binary trees rather than simple linked lists. This
1823 should give rather dramatic speed improvements for directories
1824 contining large numbers of directories/files (more than 10000).
1826 kes Fix maxruntime bug #621.
1828 ebl Implement the include JobID in spool file name project.
1829 kes Reorder projects file in order determined by Jan 2007 vote.
1830 kes Implement item #12 on project list -- quick release of FD by
1832 kes Fix open of SQLite3 db where user does not have write permission
1833 so that DIR does not crash. Fixes bug #761.
1835 kes Add back missing @ in Win32 Makefile.
1836 kes Change 'Device not configured to autolabel' from INFO
1838 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1839 which should restart an indefinite # of times.
1840 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1841 other DIR specifications.
1843 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1844 Fix path quoting in SQLite scripts.
1845 Fix problems with SHGetFolderPath.
1847 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1849 kes Fix Job restart on error bug that promotes an Inc to a Full
1850 backup. This should fix bug #755.
1851 kes Add qt-console and first cut of code.
1855 kes Fix Bacula->Documentation link on Win32 to point to index.html
1856 instead of bacula.html. Fixed bug #750.
1857 kes Return JobId in db_get_job_record() when JobId==0. This should
1859 kes Do not release source pointers when restarting a failed job.
1861 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1862 This *should* fix bug #747.
1863 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1866 kes Modify USTORE constructor to set an empty store_source string,
1867 and don't copy the store_source string in a cancel. Hopefully
1868 this will fix Arno's seg fault, bug #744.
1869 kes Add back code to disable conio in configure. Fixes bug #743.
1870 kes Correct the Options scanner in the FD to correctly handle
1871 SHA1 option, which was eating the next option. Reported by
1873 kes Add code to indicate when the SD is spooling, spool wait, and
1874 despooling as requested by Alan Brown.
1876 Version 2.0.0 released: 4 January 2007