1 Technical notes on version 2.3
6 kes Update Win32 version of wxWidgets to most recent version.
7 kes Tweak Copy job details.
8 kes Rework dir_find_next_appendable_volume to make a bit more effort
9 to find a suitable volume before giving up.
11 kes Make ask_sysop_to_create... to return if waken from wait.
12 This helps get out of blocked conditions.
13 kes Experimental implementation of switch_device in reservations.
14 kes Implement FD version to allow easier protocol changes.
15 kes Add Plugin Options string -- not yet passed to FD.
16 kes Implement PluginOptions ACL.
18 kes Attempt to correct problems with restores with autochangers and
19 use counts going negative
20 kes Rework SD status command and implement API for bat. Implements
21 header, runing waitreservation, devices, volumes, spooling,
22 and terminated status keywords.
23 .status storage=xxx <keyword>
24 kes Clarify TLS error message by adding double quotes around name.
25 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
26 kes Pass jcr to tls routines so debug messages can be handled better.
27 kes Rework jobq resource allocation code, and possibly fix a bug
28 that caused reference counts to get out of sync.
30 kes Rename fd/dir plugin to use Bacula standard underscore.
31 kes Plugin work -- bring dir up to fd level.
32 kes Start implementation of VTL code
33 kes Fix Win32 build after adding new cats subroutine.
35 kes First cut at Duplicate Job implementation.
37 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
38 kes Start PluginOptions string, and refactor a bit of ua_run.c
39 ebl Apply Allan patch that permit to reset recyclepool.
41 kes Test patch -- possible fix or improvement for bug #1053
42 kes Refactor FD and SD status commands to permit new API code in
43 SD, and to fix Win32 build.
44 kes Win32 build is now working.
46 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
47 some ideas in patch from Scott Bailey.
48 kes Begin implementation of duplicate Job control.
49 kes Fix some of Win32 build after recent additions.
50 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
51 which causes the FD to detect whether or not the OS has the
52 honor no dump bit (*BSD systems), and if so, to skip backing up
53 any file with this bit set. The feature is enabled by setting
54 'honor no dump flag = yes' in the Options section of a FileSet.
56 kes Correct po warning message with datarootdir
57 kes Implement more code in dird.c to put configuration parsing in
58 a class rather than use globals.
59 kes Restructure SD status command for implementation of bat API
62 kes Suppress incorrect 'Will not descend from x into y' messages.
63 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
64 daemon globals used by parser.
65 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
67 kes Fix free of plugin_list when none exists.
69 ebl Apply accurate project patch.
71 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
72 on non-mempool object)
73 kes First cut of converting FD .status to work with bat API.
75 .status client=XXX header
76 .status client=XXX running
77 .status client=XXX terminated
78 kes Implement first cut of Copy Job.
79 kes Implement Catalog in Pool resource. It overrides catalog specified
80 in the Client resource.
82 kes Apply patch (with some difficulties) from Joao Henrique Freitas
83 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
85 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
86 ftruncate() actually works. In the case of some (cheap) NAS devices,
87 it does not, and so recycling NAS Volumes does not work. The code
88 simply unlink()s the file, then recreates it. This fixes bug #1011.
90 kes First incomplete cut of big malloc blocks for htable.
91 kes Tweak plugin code.
93 kes Plugin debug code + tweak a couple bat dialog layouts
95 kes Fix creating first JobMedia record during Migration to include
96 proper index. This caused slow restores of migrated jobs.
97 kes Temp fix to plugin name file_index.
98 kes Bacula backed up and restored a MySQL database.
100 kes Implement plugin restore.
101 kes Implement parsing of db_driver to give db_type index.
103 kes First cut of plugin restore code.
104 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
105 and do not strip paths on symbolic links.
106 kes Set catalog backup database and user name from values specified on
107 the ./configure line.
108 ebl Fix #1031 about wrong pool source information in job report.
111 kes Remove a redundant jcr argument to find_files, match_files, and
113 kes Implement '.status dir header|scheduled|running|terminated' that
114 prints the requested status section. With the exception of the
115 header, the other reports have fields separated by tabs (\t).
117 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
118 a resource embedded run command to find a since time if no explicit
119 since time was supplied on the command line.
120 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
121 that updates the state file at job termination time in addition to
122 when the daemon terminates.
124 kes First version where a plugin did a backup.
125 bpipe-fd.so created a backup file, wrote a test
126 string to it, and Bacua could restore this fabricated file.
128 kes Implement DB Driver = string for the DBI driver.
129 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
130 kes First cut of code for loading Win32 plugin dlls. Implement
131 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
132 and implement a dlfcn.h file based on opengroup's definitions of
135 kes First cut plugin directives.
137 kes Apply patch from bug #1049 to prevent stripping the path on a
139 kes Attempt to fix bug #1047 where stripping a path corrupts the
140 heap. Waiting for feedback.
141 kes Correct the Mount message not to suggest labeling a new tape
142 when doing a restore. Submitted by email by John Stoffel.
143 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
144 FD by using casting. Reported in bug #1042.
146 kes A bit of crypto cleanup. More later.
148 Release Version 2.2.8
150 kes Apply patch from Martin to correct bug #1040, bscan sets existing
152 kes Fixed important spelling error in doc -- bug #1045.
154 ebl Fix bextract to be able to extract non-portable Win32 data to
156 kes Move initialization of read/write res lock earlier in the code.
157 This fixes the crash with a null conf file. This fixes bug
159 kes Redefine CURES in lib/parse_conf to be URES and move it all
160 into lib/parse_conf.c -- this responds to bug #1042, but does
161 not fix it. The fix is not to compile with FORTIFY_SOURCE.
162 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
163 the trunk SVN. I don't think this was reported as a bug.
165 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
167 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
169 kes Add DataDespooling and DataCommitting status (committing is
170 the last despooling).
171 kes Finish implementation of new reservations code noted below.
173 kes Fix bsnprintf for float point numbers. I broke recently when
174 parameterizing some variables. This fixes bug #1036.
175 kes Undo recent reservations changes ... will apply them later
176 when they work better.
178 ebl Fixes #1034 which cause mysql to hang the connection after 8h
179 ebl Change default statistics target of filename.name and path.path
180 fields for PostgreSQL. This speeds lookup by indexes. Thanks
182 kes A few more tweaks to new reservation code. Make sure to clear
183 vol released flag when retaking volume. When reading label and
184 label is bad mark volume unused. When recycling, mark volume
185 unused so it can be renamed.
187 kes Fix reserve_volume() so it doesn't release a volume in use
188 (i.e. a volume entry not marked released). This should be
189 the last part needed to fix bug #1018.
191 kes Move Heartbeat documentation from Job to Director resource.
192 This fixes bug #1033.
194 kes Fix existing switch drive SD code to call autochanger to release
195 any old volume. This must be done to keep the autochanger from
196 releasing subsequently newly reserved volumes in doing a close().
197 This should fix bug #1018.
198 kes Fail if attempting to get console input in batch mode. This
199 should help fail RunScript console commands that are incomplete.
200 kes First cut implementing switch_drive() in SD (not actually called).
202 kes Implement first cut running console commands in a RunScript.
204 ebl Fixes bug #1028 where 'Selection Type' option was not usable
206 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
209 Release Version 2.2.7
211 kes Add new free_tls() entry point so that Win32 builds.
212 kes Fix compile warning in src/lib/util.c
213 kes Fix entry point for edit_job_codes() so that Win32 builds.
214 kes Fix seg fault Frank Sweetser reports in regression testing
215 on his systems. The problem was that the original author of
216 bsnprintf.c did not take into account the side effects of
217 using ++x in the argument to a #define.
218 kes Make SD protocol backward compatible with version 2.2.x.
220 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
221 because Bacula no longer restores sockets.
222 ebl Always use ignorecase fileset option on win32 FD.
224 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
225 that implements double quoting include names in conf files,
226 and also allows piping input by having the first character
227 be a vertical bar (|).
228 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
229 that implement %f in RunScripts to pass the FileSet name.
230 kes Skip leading | when lex input comes from a pipe as suggested
231 by Michael Stapelberg <michael@stapelberg.de>.
233 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
234 Nerijus Baliunas <nerijus@users.sourceforge.net>
236 kes Implement Plugin Directory and plugin events.
238 kes Implement a security enhancement: TLS authentication but no
239 encryption. Enabled by setting 'TLS Authentication = yes'.
240 Note when this is on, TLS encryption is turned OFF!
242 kes This patch corrects a problem where the maximum concurrent storage
243 jobs counter gets out of sync during restore jobs causing jobs to
244 'wait on max Storage jobs'. This patch fixes bug #1009.
246 kes This patch fixes bcopy so that it produces correct Volumes.
248 kes This patch eliminates spurious output to the console during a VerifyVolume
249 job that contains encrypted data. It fixes bug #1024.
251 kes This patch prevents the 'status dir' command from trying to use a scratch
252 volume and possibly moving it from one pool to another. This patch fixes
255 kes Add new include to postgresql.c suggested by Marc Cousins so
256 that it compiles correctly with pgre version 8.3.
258 kes Fix --archivedir addition to configure. Replace it with
259 --with-archivedir in configure.in This fixes the regression
261 kes This patch fixes bug #1012 where the job is canceled because
262 of Max Run Time exceeded when the job has not yet started.
264 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
265 one 'part' to write. Instead of each part being stored on disk,
266 written to DVD, then deleted from disk, all parts are written to disk,
267 and only the last is written and deleted from disk.
268 kes This patch fixes the status command to include the formating string for
269 JS_AttrInsterting. It fixes bug #1021.
270 kes This patch should fix the Mac OS X build problem on the latest
271 Darwin, where sys/types.h was not included correctly (apparently
272 due to a change in the Mac headers). The solution was to explicitly
273 ensure that it is defined for the ./configure.
274 This patch also has a rebuild of configure that includes the Debian
275 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
276 kes This patch should ensure that queued messages to the console are
277 displayed as soon as possible. It should fix bug 1007, but has been
278 reported not to work.
280 kes This patch fixes the infinite loop when trying to increase the
281 maximum number of volumes in a Pool during the add command.
282 This patch fixes bug #1008.
284 Release Version 2.2.6
286 db Remove extra data on estimate command in joblist for bat.
288 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
289 really change anything, but is the beginning of doing it *right*.
290 To do it completely right the LastWritten date must be passed to
291 the SD, but it is not yet done.
292 kes Minor tweaks to some bat restore SQL.
293 kes This patch fixes bug #1003 where putting the message output from
294 a Verify job into the catalog results in a recursive loop. The problem
295 seems to show up only with postgresql (to be verified).
296 kes Correct %x to %p in postgresql debug statement.
298 kes Fix bug #942 where lots of emails where generated when the heartbeat
299 interval was low and Bacula wanted a different tape from the one in
302 ebl Add new SD despooling attributes and Dir inserting attributes
303 job status codes in the catalog (Status table).
305 ebl Use qmake-qt4 instead of qmake when available (debian system).
307 kes Add a security warning to src/cats/make_catalog_backup.in indicating
308 that passing the password via the command line (arg 3) is insecure.
309 This responds to bug #990 (it doesn't fix it).
311 kes Set default debug_level to zero. This corrects bugs #991 and #993.
312 kes Fix a crash in bat when it cannot connect to the Director for example
313 if the Director is not running.
314 kes Remove redundant INDEX (JobId) from File table in the trunk.
316 kes Make explicit exception to GPL in LICENSE to permit linking
317 the Win32 FD with Microsoft VSS code.
318 kes Apply the Solaris package patch from
319 Masopust, Christian <christian.masopust@siemens.com>
320 kes Apply the patch to optionally add a timestamp in the debug output
321 submitted by Mariusz Czulada <manieq@wp.eu>.
323 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
324 backend (sql_strerror). Fixes bug #989
326 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
327 It applied with no problems.
328 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
330 kes Redirect stderror to stdin on mt status command in mtx-changer.in
331 since the status is returned on stderr on Solaris.
332 kes Activate Close button on tray-monitor window. This fixes
334 kes Check for NULL item in parse_conf.c before calling it. In the
335 case of Device, there is no item and this caused a seg fault when
336 Device appears in the conf file.
337 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
338 avoids pulling in config.h multiple times in some new code.
340 kes Fix spurious warning message printed when creating a volume with
341 a LabelFormat. This fixes bug #976.
343 Release Version 2.2.5
345 kes Add JobId in place of Job name in all the Jmsg() output.
346 kes Correct the APP_DESC for the Win32 storage service (remove an e).
348 kes Make maxvol-test and new more strict maxvol2-test work.
349 kes Print JobId in all Jmsg() job output.
351 kes Add new SD despooling attributes and Dir inserting attributes
352 job status codes. This fixes bug 961.
353 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
355 kes Fix doc issue. This fixes bug #963.
356 kes Fix listing performance problems in bat. Pointed out by
358 kes Remove old debug code.
359 kes Fix bat code that tests for Win32. This should fix bug #968
360 kes Query 5 list wrong Vol after migration. This fixes bug #960
362 ebl Fix #969 where user can't change Replace option in restore menu.
364 kes Save jcr in thread specific data (tsd) for each thread.
365 kes Make Dmsg() print JobId as -%u.
366 kes Make Jmsg, Emsg, and others automatically pickup the jobid
367 for the thread if it exists.
368 kes Remove old reservation debug jid code.
369 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
370 ebl Add an option that permit to specify spool size in job
371 definition. (Applying patches/testing/spoolsize_per_job.patch).
372 You must upgrade SD and DIR at the same time.
373 dvl Add new configuration item --archivedir
374 dvl Adjust regression tests to use tmp not /tmp. This will allow
375 multiple concurrent runs of the regression tests.
377 kes Fix race condition that drops final block written to volume.
378 This happens in rare cases with multiple simultaneous jobs
379 when the Volume fills. This fixes bug #964. May be related
380 to bug #935 and possibly #903.
381 kes Eliminate more strerror() and replace with bstrerror().
382 kes Remove BSD getopt and replace with unrestricted IBM version.
383 kes Fix Win32 build for changed calling sequences.
384 kes More tweaks to the mount volume routines to get everything
385 right. Changed variable name from find to have_vol, which is
386 much easier to understand.
387 kes Enhance btimer debug code.
389 kes Fix FD->SD authorization failure, which was due to spurious
390 wakeups from a pthread_cond_timedwait(). Simply check the
391 predicate before continuing. This fixes bug #953.
392 kes Add const char where needed (more to do). Remove temp debug code.
394 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
395 kes Don't overwrite error message in check_tables_version.
397 kes Unlock batch insert tables with same calls used elsewhere.
398 kes Allow starting 59 jobs a second.
399 kes Make SD session key more random.
400 kes Add retry for SQLite opening db if it fails. Probably helps
402 kes Suppress extra error messages during batch insert failure.
404 kes Add jcr to timer packets so if killed message can be sent to job.
405 kes Add JobId to all Dmsg() output.
406 kes Put some FD auth code on dbglvl rather than fixed.
407 kes Return insert attributes error message in db msg buffer to avoid
408 false error messages. Helps fix bug #966.
409 kes Separate batch init error messages. Probably helps fix bug #966.
410 kes Make SD code that contructs attribute insert check string lengths
412 kes If Dir gets an error during inserting attributes, cancel SD.
413 This reduces unnecessary error messages.
415 kes Correct search boolean for getting Volume info
416 ebl Cleanup batch insert code. Probably fixes bug #965.
417 kes Back out one small change to the reservation system (reserving a volume).
418 kes Rework how a Volume is mounted. It is now much more intelligent and
419 will always attempt to use any mounted volume if possible and reduces
420 calls to the Director asking about volumes.
422 kes Turn off some code when batch insert not enabled.
423 kes Edit FD name in connect error messages.
424 kes Rework the reservation system to take into account that the Director
425 might give us a Volume that is different from the current one being
426 used, and to ensure that we don't exceed Maximum Volume Jobs.
427 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
428 fatal error with multiple jobs running'
429 kes Add more debug code in reservation system.
430 kes Implement maxvol-test to check bug #947.
432 kes Add code to handle tray monitor separated from Win32 FD.
433 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
435 kes Add missed return in fixing verify bug -- trunk only.
436 ebl Fix a command parser issue causing a director segfault.
437 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
439 kes Increase the max block size to 4MB fixes bug #957.
440 kes ERABT if user sets min block size > max block size. Fixes bug #956.
441 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
442 is not properly mounted (recognized) during a poll.
443 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
444 Job that has differences reports Verify OK.
445 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
447 ebl Add an option to operate on all pools with update vol parameters.
448 This complete the project 20. Patch from Nigel Stepp.
449 ebl Add history support to bconsole when using readline.
450 Using Ctrl-D to exit doesn't update .bconsole_history
451 kes Modify new volume algorithm to use max MediaId for generating next
452 volume number rather than the count of Volumes. This should essentially
453 eliminate the failure rate if some volumes were deleted. Bug #921.
454 kes Begin implemention of Optimize Job Scheduling.
455 kes Implement restore callback that Dirk and I agreed on for bat
456 restore. This fixes bug #928. Restore of backup of zero files fails.
457 kes Fix SQL Catalog logging which broke with new db_escape_string
460 Release Version 2.2.4
462 kes Fix bacula_cats.def for new db_escape_string().
463 kes Increase size of name string when FD making connection to SD.
464 May fix bug #953. FD->SD connection failure.
466 kes Add code to help Dan debug 2drive-incremental-2disk test.
467 kes Add code to try to fix bug #908.
468 kes Add waits to multiple exit detection code to try to force pid
469 file to always be deleted.
470 kes Restore good dev.tar.gz to rescue set appropriate binary property.
472 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
473 trying to switch drives by checking for blocking before unblocking.
475 kes Cancel storage daemon in all cases where FD reports error. This
476 should fix virtually all cases of bug #920.
477 kes Fix db_escape_string() for MySQL which did not compile.
479 kes Fix error message that was clobbered when Dir tells SD it does not
480 have write permission on Volume. This should fix a minor point
481 in bug #942, but not the main problem.
482 kes Add code to cancel job in SD if FD connection fails. This should
484 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
485 dvl Pass jcr and db into db_escape_string() to enable better escaping
487 kes Fix migration code to get correct Volume name with multiple volumes
488 by skipping |. Fixes bug #936.
489 kes Implement patch supplied by Landon to fix bug #944 where using
490 TLS with bconsole uses 99+% of the CPU.
491 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
493 kes Move patches into patches directory.
495 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
498 ebl Using 'm' in bconsole will show messages like before,
499 and not memory usage.
500 kes Fix bug #935, and probably also bug #903 where files were not
501 restored. MediaId was not properly set in JobMedia record after
504 kes Suppress chown and chmod error messages if the FD is not running
507 kes Apply Martin Simmons' patch that should turn off the new API usage
508 when batch insert is turned off allowing building on older
510 kes Add ./configure search in qwt-qt4 for qwt package
512 kes Bacula is now free of 3rd party GPL copyrighted code!
514 kes Add guid_to_name.c/h which replace idcache.
515 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
517 ebl Detect if new PosgreSQL batch insert API is present.
518 kes Correct incorrect mempool call causing Director crash. Occurs on
519 systems without va_copy().
520 sb Update spec files for 2.2.1 release
522 kes Fix memory pool call in ua_output.c. bug #934.
523 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
524 Add test program to fnmatch.c
526 kes Integrate patch to README.vc8 from
527 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
528 edit it to get it into Unix patch format.
529 kes Implement mkpath.c to replace old FSF makepath.c
531 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
533 Release Version 2.2.1
535 kes Update POTFILES.in
536 kes Cleanup a few underquoted AC_DEFUNs in configure
537 kes Apply patch from Martin Simmons that adds a test for va_copy to
540 kes Fix bug #921 by increasing the number of tries to create a new volume
542 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
543 can be called multiple times. Implement a version for machines
544 without va_copy() that gets a big buffer.
546 kes Integrate more portable zone offset code into bsmtp.c
547 Submitted by Attila Fülöp.
549 kes Fix bad SD->FD return status reported by
550 (James Harper) <james.harper@bendigoit.com.au>
551 ebl Fix a bug in read_close_session which return random status
552 thanks to James Harper
554 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
555 and directory names during restore of single file/directories.
556 kes Add sanity checks to .sql command when string is empty. Hopefully
557 that will resolve Dirks Director crash.
559 kes Apply patch submitted by Martin Simmons that corrects a seg fault
560 in the bsmtp chat subroutine when debug is >= 10.
562 kes Fix Director crash when running bat SQL queries.
563 kes Add David's notes on Item 8: Copy pools.
565 kes Rework projects file to be current and ready for a vote.
566 kes Enhance lex scanner error message.
568 kes Tweak LICENSE file to mention BSD code.
569 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
570 if specified on the ./configure.
571 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
572 This class is intended to allow us to open a second bsock to the
573 Director while in the restore subdialog.
575 kes Fix configure to create bat Makefile before creating dependencies.
576 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
577 kes Add a tooltip to the tray monitor.
578 dvl Set the Director's PID file before dropping privs. This fixes
581 kes Update AUTHORs file
582 kes Increase the default max concurrent jobs to 20 in FD and SD to
583 correspond with the default .conf files.
584 kes Rewrite the Win32 service routines. This eliminates the 3 copies
585 some different, of the same file created by RN when porting the
587 kes Rearrange some of the Win32 directories and the placement of the files
589 kes Set DEVELOPER flag in version.h
591 ========================================================================
592 Release Version 2.2.0
594 kes Apply a second doc patch from Marc.
595 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
596 improves the tips section that discusses how to setup multiple
599 kes Update bat README file.
600 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
601 corrects a typo in the Recycle status check in db_find_next_volume().
602 This will probably fix a number of annoying problems with multiple
604 kes Modify most of dird/msgchan.c to use bsock class calls rather than
605 bnet calls -- no functionality change.
607 kes Modify the Verify output to specify if files are missing on
608 the Volume(s) or disk. Fixes confusion in bug #916.
609 kes When more than one Volume is read in a migration job, the last
610 Volume bytes reported are from the last read volume rather than
611 the last written volume. Fixed. This fixes bug #910.
612 kes Fix display of Recycle flag after update volume=foo recycle=yes.
613 It previously printed New Recyle flag is: no. This fixes bug
616 kes Correct seg fault when switching tape drives during restore.
617 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
618 be used until after 2.2.0 release.
620 kes Remove fnmatch() in SD that permitted wild card specifications.
623 kes Fix %g in filename returned by SQL for browse tree reported by
625 kes Fix configure so that it puts config.out in the cwd rather than
627 kes Attempt to fix the locking problem reported by Eric in bug #906.
628 kes Make berrno class to leave errno unchanged after constructor call.
629 kes Make bnet_server use the heap rather than the stack to allocate
630 its socket fd pointers to avoid a crash at termination. Problem
631 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
633 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
634 and putting it in depkgs-qt along with Qt4.3.
636 kes Rework code in acquire.c that switches drives for reading when
637 the Media Type does not match. This should fix bug #906
639 ebl Fix a director segfault during job setup #907
640 kes Correct seg fault in postgresql when first operation returns no
641 rows. Fixes Dirks File browser problem seg fault with bat.
643 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
644 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
647 kes Implement PopUp YES/NO dialog for bat.
649 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
651 kes Correct RunScript to terminate job in FD on failure.
652 kes Change abort_on_error and AbortJobOnError to fail_on_error
653 and FailJobOnError in RunScripts.
654 kes Minor tweaks of code formating in RunScripts, principally to
655 avoid depassing 80 columns.
657 kes Eliminate one #ifdef Win32 in bsmtp
658 kes Implement grow tool to grow a file for testing very large databases.
659 kes Add big-vol-test to test Bacula seeking with > 5GB.
662 kes Modify find_next_volume() to return all values in Media record.
663 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
667 kes Update Release notes
669 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
670 Warning, in previous beta version, all media get from scratch keep their
673 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
674 This should fix bug #842. Made a note to look at removing the temp
675 files at the end of the install.
676 kes Add ability to mount and unmount a file device providing it is
677 marked as being removable and has the appropriate mount and unmount
678 commands defined in the Device resource. This fixes bug #830.
679 kes When applying a storage override, release all previous storage
680 definitions rather than just prepending the new storage.
681 This should prevent a good deal of confusion.
683 kes Implement ./configure search for qwt libraries.
685 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
686 Win32 FD. This should fix bug #893.
687 kes Remove an unnecessary beep in Win32 init code.
688 kes Update copyright dates in Win32 executable about boxes.
689 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
690 code with a BSD getopt.c and getopt.h.
691 kes Remove sched.h from the Win32 compat directory -- not used.
692 kes Remove the Exit menu item from the Win32 tray monitor. If you really
693 need to shut it down, do it through the services panel or the command
695 kes Remove some inappropriate Bacula FSFE copyrights.
696 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
697 kes Fix regress config non-portable test as pointed out by
698 Florian Heigl <florian.heigl@gmail.com>
699 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
700 as pointed out by Florian Heigl <florian.heigl@gmail.com>
702 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
703 Reported by Frank Sweetser.
707 kes Fix client-only build.
708 kes Integrate client-only fixes for bsys (initgroups) and conio from
709 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
710 kes Make arguments to get_scratch_volume() in same order as other
712 kes Rework the prune_volumes() subroutine so that after purging and
713 no volume found in desired pool, it will check for a scratch
714 volume. This prevents recycling the whole scratch pool.
715 kes Add code to status storage to print boffset_t (largefile support).
717 kes Move qwt (Graphics libarary for Qt4) to depkgs.
718 kes You now need a --with-qwt=<dir> to be able to build bat.
719 kes Update src/win32/cats/bacula_cats.def to include the new
720 db_get_query_dbids() call on Win32.
722 kes Correct a problem when selecting a scratch volume and moving
723 it to another pool that lost some columns.
724 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
725 kes Enhance Autochanger error messages to include Volume and device name.
726 kes Rework prune_volumes() code to take account of InChanger flag,
727 and to handle recycling volumes going to the Scratch pool and
728 current pool because the RecyclePool directive.
729 kes Implement a better and more efficient db_get_query_dbids() to
730 handle creating and passing back a list of DBIds.
734 kes Start work on new more efficient DBId subroutine. First use
735 will be for recycling volume to Scratch inchanger.
736 kes Increase number of JobIds in pruning from 1000 to 10000.
737 This to be replaced by above routine.
738 kes Begin implementation of building Qt4 on Win32.
739 kes Correct typo in fix I added for bad TLS shutdown.
740 kes Pull 2.0.3 patches into patches directory.
741 kes Update Release notes. Include qt-console in line count.
742 kes Update Projects file.
744 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
745 bug in migration code where a job that spanned two volumes
748 kes Implement new BST_DESPOOLING blocked state. Change from locking
749 during despooling in SD to blocking. This means that other threads
750 can work with the device structure, in particular the reservations
751 system while despooling.
753 kes Fix return in reservation message queue that missed clearing
754 the jcr lock (implemented 26Jun07 below).
755 kes Rename a number of dev methods to make locking function names
757 kes Document locking in lock.c. Move lock structures to new file
760 kes Move reservations message lock to lock jcr only this
762 kes Move main SD locking code into lock.c (new file).
763 kes Update Win32 build to include lock.c
767 kes Dirk committed the qwt library code for drawing graphs in bat.
768 kes Tweak install of qwt so that it is integrated with ./configure.
770 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
771 out by Eric (my typo).
772 ebl Fix configure.in to get batch mode enable
773 kes Return correct string from authenticate.cpp in bat when connecting
775 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
776 spurious line drops when using TLS.
777 kes Do not file reparse points when restoring a file that already
780 kes Implement Windows reparse points -- similar to directories, but
781 we do not descend into it. This is a first cut. They seem to
782 be backed up, but restore is not yet tested.
783 kes Remove restore_blocking in tls code when shutting a socket to leave
784 it in blocking mode. Hopefully this will fix the encryption bug
785 reported by Frank Sweetser.
786 kes When opening a file for backup, tell the OS that we are going to
787 read it sequentially -- optimization.
788 kes Change variable names in authenticate_director() to not conflict
789 with member names in bat. Caused great confusion with compiler,
792 kes Queue openssl error messages in case of comm problem.
793 kes Do shutdown() call if socket terminated.
794 kes Remove some duplicated code in tls.c
795 kes Move more of the bsock member variables into private and access
797 kes Add Frank Sweetser's tls-test to the regression suite.
799 kes Add Swedish sv.po file
801 kes Don't print clock skew message in FD if less than 3 seconds diff.
802 kes Add a bit of VSS info to status client.
803 kes Implement a first cut of Vista VSS, using Win2003 code.
807 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
808 loaded tape but uses first drive).
809 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
810 This was indeed a Win32 issue.
812 kes Simplify search of autochanger for in-use Volume.
813 kes Fix exit condition of check for in-use volume. kes Remove
814 inappropriate my_postgresql_free_result() in db_close()
816 kes Fix bad return in FD when encryption signature not found.
817 Probably caused a crash.
818 kes Inhibit missing encryption signature error messages for
819 file types where no signature computed.
820 kes Correct inverted check on autochanger in reservation system.
821 kes Tweak debug code in autochanger reservation.
823 kes Add some additional locking in the cats directory in subroutines
824 that modify packet variables called from batch insert.
825 kes Rework how dcrs are allocated. new_dcr() can now be called
826 with an existing pointer, and it will simply clean it up.
827 This allows the reservation system to test various different
828 devices, and will permit easy device changes.
829 kes A bunch of changes all over to handle new new_dcr() calling
831 kes Work more on the Volume management in the SD. Remember Volumes
832 for tape drives and for autochangers (even virtual disk changers).
833 kes When looking at the Volume list to reserve a drive, handle
834 autochanger names correctly by interating through the changer
835 devices. Also call the Director to see if a Volume is suitable
837 kes Fix some bugs in bscan. Make sure all media records are written.
838 Make sure that valid JobMedia records are written for disk files.
839 Previously they were completely wrong.
840 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
841 that the URLs don't change and so that the developers will all
842 work off the same copy. Rebuild from scrach.
843 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
847 kes Fix seg fault in FD from incorrect digest size.
848 kes Fix argument to non-OpenSSL crypto.c subroutine.
852 kes Remove a few malloc()s from the encryption code.
853 kes Use the class calls to bsock in filed/backup.c and restore.c in
854 place of the old bnet_xxx code.
855 kes Implement code that does an on the fly calculation of the
856 signing digest during restore of encrypted files. It makes
857 a best guess at the algorithm, and if it is not correct, will
858 then revert to the old code which reads the file after it is
860 kes Implement at least one missing crypto stream in stream_to_ascii()
861 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
862 #877 where a reload with bad syntax causes Dir to exit.
864 Cut: 2.1.14 beta (not released)
866 kes Do not free a volume on a tape drive until another volume is
867 mounted and read, or the autochanger unloads the volume.
868 This should help the SD re-use volumes that are already mounted,
869 and should fix bug #886.
870 kes Apply patch from user brettedgar that allows gnome2-console include
871 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
872 kes Apply patch from Lucien Weller that fixes day of week calculation
873 because of DST flag problem. Fixes bug #887.
875 kes Move find_next_appendable_volume() to after acquiring a valid device
876 in reserve.c. This fixes bug #864 -- confirmed by reporter.
878 kes Unable to reproduce bug 872. However added additional testing for
880 kes Bug #874 resolved by documenting SQLite limitations.
881 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
882 kes Bug #881 resolved by removing typo in mtx-changer script.
883 kes Made Frank Sweetser's wiki the official Bacula wiki with his
884 approval. Added a link to the wiki on the web page, and implemented
885 a backup from http://paramount.ind.wpi.edu
887 kes Fix update allfrompool to pass pool name.
889 kes Convert to pure GPL v2 license.
890 kes Fix sscanf problems reported by Peter Buschman that caused
891 a bus error on Solaris.
892 kes Rework (simplify) the select prompt in bat.
893 kes Move get_jobid_from_tid() into lib and create a
895 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
896 should definitely fix the problem of lost error messages in the
898 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
899 kes Eliminate tcpd.h from the project. Enclose the #include from the
900 library with extern C ...
901 kes Add print of signal name when a signal is trapped.
905 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
907 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
908 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
909 makes SQLit3 run 30 times faster, though a bit less safe.
910 kes Implement --with-batch-insert in configure and detection of thread
911 safe libraries. It is on by default, but turned off if no thread
912 safe library (e.g. SQLite 2) is available.
914 kes Fix Bacula PostgreSQL buffer overruns.
915 kes Do better checking for NULL results returned from PostgreSQL;
916 implement retry for failed queries; clear results buffer after
917 failed query. Hopefully this will correct the PostgreSQL failures.
919 kes Implement algorithm to handle only one appendable volume with
920 Prefer Mounted Volumes = no.
921 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
922 returned from a query.
923 kes Make volume lock recursive.
924 kes Implement an additional volume reservation algorithm that
925 starts by considering all reserved volumes then uses the
926 old brute force algorithm of searching the resources to
927 find a suitable device.
928 kes Add new reservations debug code and refine the old code.
929 kes Update the win32/dll/bacula.defs file.
931 kes Tweak reservations algorithm to permit a few more cases, i.e.
932 volume reserved, but on different drive, ...
933 kes Enhance SD status to include Pool and Media Type for drive in a
934 more readable format (a bit longer).
935 kes Fix PostgreSQL double free.
937 kes Minor refactoring of restore decryption code.
938 kes Add code to smartall.c to detect double free of a buffer.
940 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
941 so that bsmtp will create a correct email address (mailbox only).
942 kes Modify 'memory' command so that the buffers are listed as 'In use'
943 to avoid confusion with Orphaned buffers.
944 kes I reworked the OpenSSL include/lib flags to be handled in
945 the standard Bacula way, which should fix bug #863 concerning
946 non-standard OpenSSL libraries.
948 kes Implement Help Browser window for bat.
949 kes Fix reload bug that reset StorageId to zero.
951 kes Fix TLS #ifdefing when TLS turned off.
952 kes Ensure that when labelling a tape with Slot=0 that InChanger
954 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
956 kes Add StartTime to final uar_sel_jobid_temp query so that we can
957 add DISTINCT (required by PostgreSQL).
958 kes Implement BSOCK authenticate_director() method. Eventually will
959 authenicate all daemons.
960 kes Move several more functions into the BSOCK class.
962 kes Add code to tell the OS that we no longer need a cached
963 file that we were reading. In findlib/bfile.c. Also,
964 only cache files that we are reading. Thanks to
965 Tobias Oetiker <tobi@oetiker.ch> for the idea.
966 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
967 kes Implement script to automatically generate cats and dll .def
969 kes Update README.mingw32 to include new .def file generation.
970 kes Correct typo in UTF-8 error message as reported by:
971 jhernandez <julianhernandez@gmail.com>
972 kes Add additional sm_check() code on debug level 1.
973 kes Set default debug level to 1.
974 kes Trap SIGABRT in attempt to get traceback.
976 kes Reduce bat connect timeout from 30 to 15 seconds.
977 kes More restructuring and implementing BSOCK class in place of
979 kes Remove a few unnecessary malloc() tests in crypto code.
980 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
981 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
982 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
984 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
986 kes Fix Verify InitCatalog. The attributes were not pointing to the
987 correct saved location.
988 kes Implement message callback so that GUI is sure to get all
989 daemon messages. Currently displayed in a dialog in bat.
990 kes Ignore SIGUSR2 (Bacula timer) in bat.
991 kes Apply regress patch from bug #859 to allow regress to work
992 with Solaris compiler.
994 kes Begin adding TLS support to bat.
995 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
996 clean up lex.c and make it more readable.
998 kes Move more bnet functions into the BSOCK class.
999 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1000 kes Complete change of berrno strerror() method to bstrerror()
1002 Release: 2.1.10 beta
1004 kes Cleanup incorrect email addresses in bsmtp.
1005 kes Make bat display initial messages rather than discard them.
1007 kes First cut of adding .mod to the run command.
1008 kes Implement auto display of messages in bat.
1009 kes Enhanced preferences to allow all Bacula output to be
1012 kes Try to make bsmtp date routines more generic.
1013 kes Fixed bug #856 autochanger documentation.
1014 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1015 kes Add new cats entry point so Win32 builds.
1017 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1019 kes Do better checking for the MySQL 64 bit libraries looking for both
1020 .a and .so libraries.
1021 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1022 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1023 kes Require the thread safe version of MySQL during configure. Thanks
1024 to Andre Noll for pointing this out.
1025 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1026 continuing in migration code.
1027 kes Apply implementation of tray-monitor font derived from gnome-console
1028 submitted by Andreas Piesk <a.piesk@gmx.net>
1030 kes Eliminate important memory loss in SQLite
1031 kes Fixed the batch insert MySQL thread specific data that was not
1032 being freed. See cats/mysql.c:db_thread_cleanup().
1033 kes Fix restore before command.
1034 kes Convert old hdr.name to name() in a few places.
1035 kes Implement update jobid command.
1036 kes Return all time_t dates in db_get_job_record()
1037 kes Stop watchdog in SD earlier.
1038 kes Put Pool just after Storage in please mount message.
1039 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1042 kes Update the po files.
1043 kes Fix Verify InitCatalog by making it cache attributes.
1045 kes Change name bacula-bat to bat for man 1 page to correspond to
1047 kes Check for client and store NULL pointers in status command. This
1049 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1050 kes Fix sign extended editing of %p.
1051 kes Clean out a little old #ifdefing in cats/mysql.c
1053 kes If time diff between DIR and FD is more than 600 seconds convert
1054 INFO message to WARNING.
1055 kes Implement heap size display in status for all daemons.
1056 kes Attempt to fix MySQL db open memory loss (not successfull).
1057 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1058 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1059 Query. This looks like a MySQL but but by doing extra releases,
1060 the memory goes away. This should fix bug #847.
1062 kes When backup fails, cancel SD before waiting for sd termination.
1063 kes If SD is waiting for FD to connect during cancel, wake up the
1065 kes Fix fsf code so that errno is correctly reported.
1066 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1068 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1069 so that Bacula doesn't later stumble into a seg fault.
1070 kes Use the term Restore Client in the restore Job report.
1071 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1072 the original job's FileSetId.
1073 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1074 spooling in migration jobs. Not yet tested.
1075 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1076 reading conf file from a pipe. However, do it with open_bpipe()
1077 rather than popen. Not yet tested.
1079 kes Fix an ugly bug where the VolCatBytes were getting updated
1081 kes Implement bconsole memory command that prints current memory
1082 usage, plus smartalloc dump.
1083 kes Clarify some error messages in backup, admin, and migrate.
1084 kes Shrink label dialog to smaller size.
1085 kes Invert Cancel OK buttons on restore to be OK Cancel.
1086 kes More strerror() to bstrerror() conversions.
1088 kes Start implementing bstrerror() in place of strerror().
1089 kes Stripping path -- seems to work.
1091 kes Prevent door and port files from being restored (mostly
1093 kes Free an unreleased buffer in compat code.
1094 kes Change console Job name from *Console* to -Console- to eliminate
1095 Win32 filename problems. Put Win32 path separator when creating
1096 Console file. This fixes bug #846.
1097 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1099 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1101 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1102 to force Win32 error message.
1104 kes First cut strip path. The data should be passed to the FD,
1105 but nothing is done with it yet.
1106 kes Enhance the digest and signature routines in the crypto
1107 library to accept a JCR and to use it to print error messages
1108 so that they will go in the Job report rather than the daemon's
1110 kes Simplify some of the verify signature code.
1111 kes Simplify a few of the alternative returns in the signature
1114 ebl Use only POSIX regex instead of GNU regex in breg.c for
1115 File relocation. It fix broken freebsd compilation.
1116 kes Convert all other Dir files to use new ua class message
1118 kes Tentative fix for missing digest signature in bug 807.
1119 kes Correct handle problem in new win32_ftruncate routine.
1120 kes Convert ua_purge.c and ua_update.c to use new ua class
1121 message routines for bat.
1123 kes Correct incorrect installation of LICENSE in Win32 installer.
1124 kes Display LICENSE at the beginning of the Win32 install.
1125 kes Attempt to correct the need for the png files to be installed
1127 kes Reapply my bat.conf install script in qt-console. I think I
1128 editted bat.pro instead of bat.pro.in and it was lost.
1129 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1130 the /var/lock/subsys for subsysdir. Also corrects typos in the
1133 kes First cut update job.
1134 kes Correct configure to include qmake of src/qt-console directory.
1136 kes Make restore job yes/mod/no print in one command so GUI works.
1137 kes First cut implementing backup and restore client.
1138 kes Correct editing in Verify output that caused a seg fault.
1140 kes Insure that bat.conf is not overwritten during installation.
1141 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1142 while I was implementing migration in March 2006 !
1144 ebl Cleanup file relocation, using char *RegexWhere instead of
1145 char *where + bool where_use_regexp
1146 kes Update some manpages and add bat manpage.
1147 kes Make a first cut at converting bacula.spec.in for bwx-console
1149 kes Apply patch from John Goerzen to add hostname as fourth argument
1150 to make_catalog_backup script.
1151 kes Fix typos I introduced into bsmtp.c
1152 kes Make pm_strxxx() routines handle input of NULL pointer. This
1153 is to protect from NULL pointers returned from SQL databases.
1154 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1155 kes Add more debug to FIFO code -- fix fifo regression test.
1157 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1158 kes Add thread timer to bnet_connect() to break from OS if wait time
1161 kes Update Win32 build to include new files, new symbols, and
1163 kes Implement socket level heartbeat (tcp_keepidle)
1164 ebl Commit File relocation patch
1165 kes Make bat have 'make install' target.
1166 kes Warn during install if old gnome-console binary found.
1167 kes Warn during install if old wx-console binary found.
1168 kes Add -8 option to bsmtp command line to add content type utf-8.
1169 Fixes bug #809. (Character coding problem in bsmtp).
1170 kes If < is found in target (from, to, cc) then do not enclose the
1171 target in < > in bsmtp. Fixes bug #772 (malformed address).
1172 kes When printing certain items in dbcheck, stop after 300000.
1173 Fixes bug #822. (dbcheck loops).
1174 kes Incorrect status in Dir after waiting for mount with poll set.
1177 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1179 kes Print waiting to reserve a device every 5 mins.
1181 kes Don't call close_part in label.c if tape and relabel.
1182 kes Don't free volume if busy in close() -- should help with
1184 ebl Fix #824 RunScript bug (After script could be execute twice)
1185 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1186 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1187 Add a regression script to test RunScript
1189 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1192 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1193 deprecated. No additional bugs will be fixed, and they will be dropped
1194 in a future release (probably 2.4.0).
1195 kes Change name of wx-console to bwx-console to make it more Bacula
1197 kes Change the name of gnome-console to bgnome-console to make it
1200 kes Some time in March, a Feature Request with patch from Jorj Bauer
1201 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1203 The ability for the director to validate a Client (FD) CN against
1204 an arbitrary set of patterns rather than the hostname, with
1205 A new 'TLS Allowed CN' set of directives which are implemented
1206 in the Client resource. Then pattern matching is used in place
1207 of hostname matching against the Certificate's CN. As an example, we
1208 have certificates which (a) use a local CA, and (b) have a CN of the
1210 kes Add new/changed entry points to Win32 build
1211 kes Create unaccepted-projects for projects that are not accepted.
1212 kes Simplify locking in the reservations system.
1213 kes Add more debug code in reservations.
1214 kes Make sure error condition on reserving a volume is handled correctly.
1215 kes Correct handling of volume_in_use.
1216 kes Correct handling of initializing a device.
1217 kes Move handling of broadcasting releasing a device into release_device().
1218 kes Correct attaching dcr to dev so that it is only done if device
1219 is properly initiated.
1221 kes Locking debug level tweaks in SD.
1222 kes Tweak new Volume code.
1224 kes Add exec external-command [wait-seconds] to bconsole. This
1225 executes the external-command. Note! normally external-command
1226 should be enclosed in double quotes.
1227 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1228 it should normally be off in a production system.
1230 kes Implement die command for SD so that we can force it to dump.
1231 kes Implement SD lock debug code.
1232 kes Implement new algorithm for keeping Volume list in SD. It
1233 is now owned by the device.
1235 kes Implement new code for freeing in use volumes that should
1236 resolve if not all, some of the problems of multiple drive
1237 tape conflicts described in bug 801.
1239 kes Fix gui/bacula-web/images files in svn.
1240 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1242 ebl Fix a bug in batch mode (in string escape)
1243 kes Correct migration prune SQL typo that crept in in a
1244 recent 2.1.x change.
1246 kes Move bnet_despool() into class in bsock.c
1247 kes Modify job report to include director name and Build OS.
1248 kes Move drop root privilege and check_catalog() before fork.
1249 kes Add update database scripts (version 9 to 10) to updatedb directory.
1251 ebl Check size and age of each file after its backup to see if
1252 it has changed during backup, if 'checkfilechanges' is set.
1253 The FD will do an extra check (stat(2)) after
1254 each file backup. mtime, ctime and size are compared with
1255 'before backup' information. If time or size mismatch, an
1256 error message will be generated. You must upgrade FD to use it.
1258 kes Make database name and user configurable
1259 --with-db-name=xxx --with-db-user=xxx
1260 kes Add back database type to message.c for debugging.
1262 kes Implement dir_sql() which issues an SQL query.
1263 kes Modify bat medialist to use dir_sql() and do some minor C++
1264 formatting as well as eliminating a number of pointers, simplifing
1267 kes Fix some of the mtx-changer grep commands for tape label readers.
1268 kes Convert a number of bsendmsg into the appropriate send/warning/error
1269 message class calls.
1270 kes Suppress the using database message in the .sql command.
1271 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1273 kes Add context menu for floating a window.
1274 kes Some minor cleanup and name changes in qt-console
1275 kes Add doing mt setblk 0 in Win32 mtx-changer.
1276 kes Apply Martin's bug fix to move definition of ENODATA for
1278 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1279 sqlite2 and sqlite3.
1281 kes More pruning cleanup.
1282 kes Turn on wait_for_drive by default in mtx-changer.
1283 kes Turn on Batch insert code by default as it now passes regression.
1284 kes Add ./configure --enable-bat to enable building of Bat.
1285 No install yet though.
1287 kes Implement a new .sql command for bat.
1288 kes Implement code to turn off pruning in obtaining the next volume.
1289 Pruning is turned off for the status dir command, but turned on
1290 for SD requests and for the list nextvolume command.
1292 kes Correct Qmsg() that was not updated correctly when committing a
1293 previous change (probably the recent TLS patch).
1295 kes Write new subroutine is_volume_purged() that explicitly checks
1296 if the Volume is purged, and if so marks it as such. This should
1297 resolve problems reported about needing to mount twice to recycle
1299 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1300 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1301 amount of duplicated code.
1302 kes Do volume pruning only for the Media Type desired (reduces pruning time
1303 if multiple Media Types are in the same pool).
1304 kes Implement more detailed info in the Job report for the Bacula version
1306 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1308 ebl Add bbatch tool to bench database and insert mode.
1309 Fix sql quote stuff in batch mode
1310 Fix sql stuff for mysql
1312 kes Correct problems with am/pm scheduling. Fixes bug #808.
1313 kes Implement new prunning code that prunes up to 1000 jobs at
1314 the same time. The same technique can be applied to a number
1315 of other prune/purge subroutines.
1316 kes Add an insanity check when starting a new tape job to ensure
1317 that the tape position has not been changed. If so fail the
1319 kes Fix Win32 build for dlls to add the folllowing:
1320 src/lib/bsock.c -- new file with new entry points
1321 src/lib/dlist.c -- new entry points
1322 src/cats/sql_create.c -- new entry point
1323 src/cats/sql_cmds.c -- new DATA item exported
1325 ebl batch mode cleanup bscan-test is ok now.
1326 kes Implement SD code to check length of disk volume before appending.
1328 kes Correct return status on db_batch... routines.
1329 kes Add call to db_write_batch_file_records() to migration code.
1330 ebl Fix AfterJob timing
1331 kes Move the checking of the database in initializion of the Director
1332 to after we drop privileges. This avoids the need for both root
1333 and bacula access to the DB.
1334 kes Correct a misplaced variable definition in src/filed/backup.c
1335 kes Correct how the new batch insert db_create_attributes_record()
1336 uses the arguments. Caused a seg fault in bscan.
1337 kes Implement lock() and unlock() methods in DEVICE class.
1338 Implement block() and set_block(xx) methods in DEVICE class.
1339 kes Modify bnet_connect() so that it uses time() to check for the
1340 wait time expiring (on some OSes, some system calls may not
1341 return immediately).
1342 kes Modify Verify to obtain the previous JobId when it is actually
1343 running rather than at schedule time (as it was in 1.38.x).
1344 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1346 kes When checking pid in pid file, continue running if the pid is
1347 the same as ours. This occurs on IRIX after a system crash.
1350 kes Extend new GUI API.
1351 kes Make the ua structure a class, and implement send_msg(),
1352 error_msg(), warning_msg(), and info_msg().
1354 kes Apply fix from for building wx-console on the Mac from
1356 kes Implement new select mechanism for GUI programs.
1357 kes Reorganize initialization of stackedWidgets in bat.
1359 kes Add updated nagios plugin supplied by Christian Masopust.
1361 kes More bat implementation.
1362 kes File migrate bug with Pool Occupancy using mediaid instead
1363 of jobids. Fixes bug #795.
1364 kes Fix orphaned buffers in filed backup and verify due to
1365 crypto buffers not freed during errors. Fixes bug #789.
1366 kes Extend new GUI api code to tree commands.
1367 kes Ensure that tree and dot commands check console ACLs.
1368 kes Permit marking directory with trailing slash.
1369 kes Allow 20 console connections (instead of only 10).
1371 kes Add smartctl call to bacula-sd.conf as an example of getting
1374 kes Modify jobq.c to let simultaneous restore jobs run. This may
1375 cause them to fail if they cannot get a drive.
1376 kes Add Client Connect Wait to Storage daemon to permit users to
1377 modify the time the SD waits for a FD connection.
1379 kes Correct virtual changer check which was backwards. This caused
1380 volumes to be unloaded into slots already occupied.
1382 kes Apply Command ACL filter to JobId list in restore command.
1383 kes Correct typeo in var.c patch.
1385 kes Don't let Bacula prune File or Job records for the current Job.
1386 kes Fix variable substitution pad + inc bug reported (with patch)
1389 kes Correct SQLite log table index as reported by Luca Berra.
1391 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1393 kes Begin implementing new comm signals for API.
1394 kes Fix a few places in lib/message.c where the open fd may
1396 kes Continue implementing lib/bsock.c (real class). Make jcr,
1397 who, host, and port private. There are new methods to access
1398 them for non-class use. This required touching a number of files.
1400 kes Add LANG=C to autoconf/randpass so it works with languages other
1401 than English. Fixes bug #788.
1403 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1405 You will not be able to generate Include/Exclude list any more.
1406 It will be fixed soon.
1407 If you want to use this, you can apply
1408 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1410 kes Restore of sockets created false error messages because Bacula
1411 no longer restores sockets, but the code was still trying to
1412 set the attributes on a non-existent file. Reported by a user.
1413 ebl finish RecyclePool feature
1414 Media will takes Pool.RecyclePool
1415 when moving from Scratch to a Pool or when user will do
1416 update volume=xxx frompool
1417 To use it, add RecyclePool = aPool to your Pool resource
1420 RecyclePool = Scratch
1424 kes Expand new BSOCK class adding signal() and new BNET signals.
1425 kes Begin enhancing the dot commands adding a new API function
1426 that returns more information and will make it easier
1427 to interface to the Director from a program.
1429 kes Make DEVICE fd private. Its new name is m_fd, and can be
1430 obtained with dev->fd() outside the class. This is the
1431 first of many DEVICE members to be made private.
1432 kes Implement Michael Renner's idea on having a virtual disk
1433 changer. I made some minor modifications (e.g. I did not
1434 implement the Virtual Changer directive, but simply set
1435 the Changer Command to an empty string.
1437 kes Implement a BSOCK send() method that writes the whole record
1438 in a single write() request rather than in two.
1439 ebl add update volume=xxx recyclepool=yyyy
1440 volume takes recyclepool from pool when using update volume=xxx from pool
1442 kes Fix encryption deblocking bug, which caused some restored files
1443 to be truncated. This fixes bug #763.
1444 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1445 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1447 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1448 ebl Use btime_t instead of uint64_t in media patch.
1450 kes Optimize the use of the database a bit in the Status dir command.
1451 Only open it when needed, ensure that if any previous database
1452 was opened, it is closed.
1454 kes Correct VolCatBytes bug from media patch.
1455 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1456 in the case of orphaned records.
1457 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1458 and File records in 300K chunks to be more efficient. This
1459 idea came from Juan Luis Frances (if I remember right).
1460 kes Apply Eric's scratch patch that moves a purged Volume to
1461 the RecyclePool. Question: how is RecyclePool set? what
1462 happens to the ScratchPool?
1463 kes Apply Eric's media patch that collects read/write media
1464 times as well as byte counts. This patch requires a
1465 simultaneous upgrade of the DIR and SD. Note, there
1466 should be some way to turn off timing. I'm not sure
1467 times are in Bacula units.
1468 kes Apply Eric's batch-insert patch.
1470 kes Update projects list.
1472 kes Implement Include/Exclude file lists in FD as dlists using
1473 the new dlistString class. This permits efficiently having
1474 large include/exclude lists and completes project Item 25.
1475 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1476 console is authorized to cancel the job. This fixes bug
1478 kes Modify SD so that the VolCatJobs medium record is updated
1479 at the beginning of a Job rather than the end. This
1480 fixes bug #775 where exceeding MaxVolJobs caused jobs
1482 kes Added a mutex around getting and setting Volume information
1483 so that multiple simultaneous jobs will single thread.
1485 Switch to using Subversion
1486 kes Remove src/pygtk-console/ from configure
1488 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1489 plus the entrypoints.
1490 kes Apply patch supplied that corrects debug print
1491 in canceling jobs for max run time. Supplied as
1492 part of bug #621, which was previously fixed.
1494 kes Test on job_canceled() and sd_msg_thread_done inside
1495 loop starting the message thread to avoid a race condition.
1497 kes Remove rl_catch_signal from console.c as it conflicted
1498 with the header definition. Fixes bug #765.
1499 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1501 kes Clarify some stored/acquire messages to indicate if the
1502 problem is with read or append.
1504 kes Fix memory leak with storage ids in cats/sql_get.c
1505 kes Terminate watchdog earlier to avoid reference to released
1506 memory -- reported by Jason Austin.
1507 kes Move closing the database from jobq.c to the director daemon
1508 termination routine. This fixes memory leaks for shadow jobs
1509 (i.e. migration jobs).
1510 kes Free up the unique jobid chain items in migrate.c. This fixes
1511 a memory leak problem.
1512 kes Convert some ugly looking for statements to use foreach_alist
1513 in findlib/find.c. This will facilitate converting the structures
1514 to use dlist (for large include/exclude lists).
1515 kes Fix a bug in the btree.c and btree.h routines, then rename them
1516 rblist and add them to be built in src/lib. Include some new
1517 methods written by Rudolf Cejka that make the code more readable
1518 (hides some of the ugly casting).
1519 kes Add set_next() and set_prev() methods which make the code much more
1520 readable. Also add a new dlistString class that facilitates storing
1521 strings in dlists. To be used in the large include/exclude lists.
1522 kes Make some trivial modifications to lib/tree.h that use rblist
1523 rather than dlist for storing the tree links. This was suggested
1524 by Rudolf Cejka. The result of this is that the restore tree now
1525 uses red-black binary trees rather than simple linked lists. This
1526 should give rather dramatic speed improvements for directories
1527 contining large numbers of directories/files (more than 10000).
1529 kes Fix maxruntime bug #621.
1531 ebl Implement the include JobID in spool file name project.
1532 kes Reorder projects file in order determined by Jan 2007 vote.
1533 kes Implement item #12 on project list -- quick release of FD by
1535 kes Fix open of SQLite3 db where user does not have write permission
1536 so that DIR does not crash. Fixes bug #761.
1538 kes Add back missing @ in Win32 Makefile.
1539 kes Change 'Device not configured to autolabel' from INFO
1541 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1542 which should restart an indefinite # of times.
1543 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1544 other DIR specifications.
1546 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1547 Fix path quoting in SQLite scripts.
1548 Fix problems with SHGetFolderPath.
1550 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1552 kes Fix Job restart on error bug that promotes an Inc to a Full
1553 backup. This should fix bug #755.
1554 kes Add qt-console and first cut of code.
1558 kes Fix Bacula->Documentation link on Win32 to point to index.html
1559 instead of bacula.html. Fixed bug #750.
1560 kes Return JobId in db_get_job_record() when JobId==0. This should
1562 kes Do not release source pointers when restarting a failed job.
1564 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1565 This *should* fix bug #747.
1566 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1569 kes Modify USTORE constructor to set an empty store_source string,
1570 and don't copy the store_source string in a cancel. Hopefully
1571 this will fix Arno's seg fault, bug #744.
1572 kes Add back code to disable conio in configure. Fixes bug #743.
1573 kes Correct the Options scanner in the FD to correctly handle
1574 SHA1 option, which was eating the next option. Reported by
1576 kes Add code to indicate when the SD is spooling, spool wait, and
1577 despooling as requested by Alan Brown.
1579 Version 2.0.0 released: 4 January 2007