1 Technical notes on version 2.3
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
20 Improved status commands for Bat
21 Spooling/despooling status
22 Implement ftruncate for NFS devices
23 Add long term statistics job table
28 ebl Fix #1091 about bad output in estimate command.
30 kes Modify autochanger locking to attempt to avoid race
32 kes Make sure device not busy before doing label command.
33 kes Display open() errors except when polling. Previously too
34 many were suppressed. This should fix bug #1070.
35 kes Fix Win32 reparse points. Bacula will not recurse into any
36 reparse point directory, including mount points, unless the
37 directory is explicitly mentioned at the top level (same as
38 with Unix). A file that is linked to another file will be
39 backed up -- much as Unix does for hardlinked files.
42 kes Remove double quotes from ChangeLog and ReleaseNotes
43 kes Remove StorageId test when pruning and recycling (Eric's changes).
44 kes Remove old form of locking when getting volumes -- causes deadlock.
45 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
46 the name unique and to eliminate compile time error.
47 kes Add accurate.o to Win32 FD Makefile
49 kes Fix cats dll build on Win32 after db_update_job_end_record
50 calling sequence change.
51 ebl Switch to tokyo dbm instead of htable in accurate code
52 ebl Include tokyo dbm to bacula source tree
54 kes Fix buffer overruns detected by Coverity.
56 kes Tweak joblog display.
58 kes Implement --without-qwt
59 kes Fix layout of restore tree dialog
60 kes Add configure bat QWT libraries, so that bat can be built
61 with or without the QWT libaries.
63 ebl Add dummy tape driver for regression tests.
64 kes Make sure we unload the right slot when swapping.
66 kes Add debug times, reduce size of two-pool-changer test
68 ebl Tweak autoconf scripts for faketape
70 kes Improve SD reserve debug code.
71 kes Testing an improvement to free up volumes no longer in use.
73 kes Rework SD acquire for read to handle autochanger Volume
75 kes Implement regression that explicitly tests swapping a Volume
76 from one drive to another.
77 kes Enhance disk-changer to detect most error conditions.
78 kes Fix SD code so that it properly swaps a Volume between drives.
81 kes Apply libdbi patch from Joao Freitas for regress and for
82 Bacula trunk. Regress now works with libdbi. Nice.
83 kes Apply .nobackup patch from bug #1077 submitted by
85 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
86 name into jobs cloned via the run directive.
88 kes Prevent a Volume that is being swapped from being freed from
89 the volume list. This will most likely fix, at least partially,
91 kes Fix strippath so that it does not get a buffer overrun and crash FD.
93 kes Remove 50 millisec wait in SD that broke debugger.
94 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
95 that a job may run, counted from when the job was scheduled.
96 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
97 a job may block waiting for a resource, counted from when the job starts
98 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
99 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
100 that implements multiple commands per line in the console when using
101 readline. Modify the default to use a semicolon as the command separator.
103 ebl Fix SQL query in migration code.
104 ebl Make accurate mode with hash disk pass regression tests
106 ebl Implement first cut of accurate backup with hash disk.
108 kes Force unload of volume when wrong volume mounted in SD.
110 kes Fix bat seg fault at termination.
111 kes Add Bacula generated version to bat about box.
114 kes Experiment with allowing multiple read jobs.
115 kes Move final volume swapping code to DCR method and
116 call it from acquire_for_read().
117 kes When wrong volume is mounted during read, unload_autochanger.
119 kes Integrate the libdbi changes from Joao Henrique Freitas
121 kes Stop searching for Volumes in SD askdir if DIR returns the
122 same volume name twice in a row.
123 kes Close bat console windows first to eliminate error message
126 kes Tweak the swap Volume from one drive to another code so that
127 it now seems to work.
128 kes Resolve several problems with recycling that broke the new
129 code (these problems are in 2.2.9 as well).
130 kes Remove the volume lock when calling the sysop code.
131 kes Don't mark a reserved volume with no writers as unused otherwise
134 kes Rework class structures for VOLRES, DCR, and DEVICE to make
135 the method names a bit more logical, and for more logically
136 handling the responsibilities.
138 kes Remove redundant code in terminating the scheduler that just
139 causes a seg fault in many cases.
140 kes Cleanup releasing a volume and make it a DCR method.
141 kes Improve algorithm for detecting pre-reserved volume and
144 kes Tweak volume swapping code so it works.
145 kes Correct name overloading in mount.c
146 kes Replace released flag in VOLRES with reserved and add access
147 methods for the VOLRES class.
148 kes Prevent volume from being released while being swapped.
149 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
151 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
153 kes Refactor parts of stored/mount.c
155 ebl Add sanity checks for VolWriteTime and VolReadTime
156 ebl Take care of bad clock changes while computing VolWriteTime
157 and VolReadTime. This should fix or limit #1066
158 kes Correct error string numbers in dird/catreq.c
159 kes Restructure reserving, acquiring, and mounting volumes. Calls to
160 autochanger are deferred for mount.c -- simplifes the code.
162 kes Do not prune any running job. It just fails the job.
163 kes Lock the volumes when changing dev->reserved_device and marking
164 the volume unused otherwise the device can get reserved by
165 another job before the volume is released, thus blocking it.
167 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
168 kes Fix bug #1063, reuse of freed ptr in list nextvol.
169 kes Release regex compile buffer in filed/job.c
170 kes Add proper type of const char in sql_create.c
171 kes Turn off debug in daemon termination routines
172 kes Move free_volume_list() before devices are freed in stored.c
173 kes Fix reference to uninitalized stack variables in bregex.c.
174 This should correct bug #1067.
176 kes Fix possible seg fault in SD when freeing a volume entry.
178 kes Implement unload_dev() before swap device.
179 ebl Add statistics prunning with option and menu
180 kes Separate unload_dev() from unload_other_device() in autochanger.c
182 kes Apply patch from bug #1069 that corrects spurious error messages
183 when ACLs enabled on SGI but no ACL exists.
184 ebl Fix small segfault in bacula-sd when debug level is 500
185 kes Modify run_program() and run_program_full_output() to use
186 call by reference for the results string. This corrects a long
187 standing problem where the address of the string may be changed
188 in the subroutine but not in the calling program.
190 kes Re-enable code to remember last volume mounted on a non-tape
192 kes Add patch supplied in bug #1068 that fixes a SD crash when using
193 a Virtual autochanger.
194 kes Generate correct JobMedia records during spooling/despooling when
195 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
196 <tih@hamartun.priv.no> for excellent analysis and testing.
198 kes Tweak hash algorithm for htable using Martin Simmons idea
199 for doing a circular shift.
200 kes Remember what volume is in VTLs (previously turned off for
202 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
203 pointed out some problems in creating JobMedia records during
204 spooling with concurrent jobs. Fix the problem by updating the
205 start file position before despooling and generate a jobmedia
206 record at the end of despooling.
208 kes Fix handling of JobMedia records during spooling and when a
209 Volume is changed without actually writing data to the Volume.
211 kes Rework certain SD locking based on gdb tracebacks of deadlocks
212 sent by Eric. This code now uses only the volume_lock() rather
213 than the reservations lock when at EOM and acquiring a new
215 kes Ensure only one exit point in several subroutines.
217 kes Implement bsock code to permit locking. Use the new code in Verify
218 in the FD to prevent the heartbeat thread from disrupting the Verify
219 data sent to the Dir.
220 kes Modify SD locking to eliminate locking the reservations system from
221 outside the system. Use the volume lock when getting media data
222 and reserving a new volume at end of media.
223 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
224 when SD starts are not locked into place.
226 kes Fix error compiling runscript code on 64 bit machines.
227 kes Tweak Win32 mount point code.
228 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
229 cleared giving bad file estimate).
230 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
233 kes Keep Schedule run lists in order as suggested by
236 kes Implement autostart scripts for Debian.
237 ebl Implement upgrade catalog scripts.
239 ebl Apply jobstat patch for long term statistics. Have to implement
240 purge stats command and upgrade scripts.
241 kes Fix mtx-changer.in for broken Debian mt program.
243 kes Fix large number of JobMedia records reported by Eric Bollengier.
245 kes Apply doc fix from bug #1062.
246 kes Resolve crash and improper restore wx-console Win32 restore
247 GUI. Fixes bug #1065.
248 kes Update Win32 wxWidgets to latest version.
249 kes Attempt to do correct handling of Win32 mount points. Should
251 kes Fix Win32 FD backup/restore memory leak due to improper termination
252 of BackupRead/Write. This fixes bug# 1038.
254 ebl Reduce memory usage for accurate backup, working only with ctime
255 and mtime. (not all Lstat field)
256 About 40MB for my linux system (400.000 files)
258 kes Add dcr->reserved_volume flag that allows us to release a volume
259 even if it is not vol->released. This allows maxvol2 to work when
260 Volumes expire and we are already writing to the device (i.e. a
261 volume is pulled out from under us by another job terminating after
262 we reserve the drive).
264 ebl Permit multiple command/console per runscript definition.
265 RunScript { command = /bin/true ; command = /bin/false ... }
266 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
267 (restart an application) just after the VSS snapshot on windows.
268 kes Don't zap dcr values during release_volume() as they might
269 have the next Volume to be mounted.
270 kes Fix AIX prototype.
272 kes Second cut of drive switching during backup.
275 kes Update Win32 version of wxWidgets to most recent version.
276 kes Tweak Copy job details.
277 kes Rework dir_find_next_appendable_volume to make a bit more effort
278 to find a suitable volume before giving up.
280 kes Make ask_sysop_to_create... to return if waken from wait.
281 This helps get out of blocked conditions.
282 kes Experimental implementation of switch_device in reservations.
283 kes Implement FD version to allow easier protocol changes.
284 kes Add Plugin Options string -- not yet passed to FD.
285 kes Implement PluginOptions ACL.
287 kes Attempt to correct problems with restores with autochangers and
288 use counts going negative
289 kes Rework SD status command and implement API for bat. Implements
290 header, runing waitreservation, devices, volumes, spooling,
291 and terminated status keywords.
292 .status storage=xxx <keyword>
293 kes Clarify TLS error message by adding double quotes around name.
294 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
295 kes Pass jcr to tls routines so debug messages can be handled better.
296 kes Rework jobq resource allocation code, and possibly fix a bug
297 that caused reference counts to get out of sync.
299 kes Rename fd/dir plugin to use Bacula standard underscore.
300 kes Plugin work -- bring dir up to fd level.
301 kes Start implementation of VTL code
302 kes Fix Win32 build after adding new cats subroutine.
304 kes First cut at Duplicate Job implementation.
306 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
307 kes Start PluginOptions string, and refactor a bit of ua_run.c
308 ebl Apply Allan patch that permit to reset recyclepool.
310 kes Test patch -- possible fix or improvement for bug #1053
311 kes Refactor FD and SD status commands to permit new API code in
312 SD, and to fix Win32 build.
313 kes Win32 build is now working.
315 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
316 some ideas in patch from Scott Bailey.
317 kes Begin implementation of duplicate Job control.
318 kes Fix some of Win32 build after recent additions.
319 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
320 which causes the FD to detect whether or not the OS has the
321 honor no dump bit (*BSD systems), and if so, to skip backing up
322 any file with this bit set. The feature is enabled by setting
323 'honor no dump flag = yes' in the Options section of a FileSet.
325 kes Correct po warning message with datarootdir
326 kes Implement more code in dird.c to put configuration parsing in
327 a class rather than use globals.
328 kes Restructure SD status command for implementation of bat API
331 kes Suppress incorrect 'Will not descend from x into y' messages.
332 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
333 daemon globals used by parser.
334 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
336 kes Fix free of plugin_list when none exists.
338 ebl Apply accurate project patch.
340 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
341 on non-mempool object)
342 kes First cut of converting FD .status to work with bat API.
344 .status client=XXX header
345 .status client=XXX running
346 .status client=XXX terminated
347 kes Implement first cut of Copy Job.
348 kes Implement Catalog in Pool resource. It overrides catalog specified
349 in the Client resource.
351 kes Apply patch (with some difficulties) from Joao Henrique Freitas
352 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
354 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
355 ftruncate() actually works. In the case of some (cheap) NAS devices,
356 it does not, and so recycling NAS Volumes does not work. The code
357 simply unlink()s the file, then recreates it. This fixes bug #1011.
359 kes First incomplete cut of big malloc blocks for htable.
360 kes Tweak plugin code.
362 kes Plugin debug code + tweak a couple bat dialog layouts
364 kes Fix creating first JobMedia record during Migration to include
365 proper index. This caused slow restores of migrated jobs.
366 kes Temp fix to plugin name file_index.
367 kes Bacula backed up and restored a MySQL database.
369 kes Implement plugin restore.
370 kes Implement parsing of db_driver to give db_type index.
372 kes First cut of plugin restore code.
373 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
374 and do not strip paths on symbolic links.
375 kes Set catalog backup database and user name from values specified on
376 the ./configure line.
377 ebl Fix #1031 about wrong pool source information in job report.
380 kes Remove a redundant jcr argument to find_files, match_files, and
382 kes Implement '.status dir header|scheduled|running|terminated' that
383 prints the requested status section. With the exception of the
384 header, the other reports have fields separated by tabs (\t).
386 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
387 a resource embedded run command to find a since time if no explicit
388 since time was supplied on the command line.
389 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
390 that updates the state file at job termination time in addition to
391 when the daemon terminates.
393 kes First version where a plugin did a backup.
394 bpipe-fd.so created a backup file, wrote a test
395 string to it, and Bacua could restore this fabricated file.
397 kes Implement DB Driver = string for the DBI driver.
398 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
399 kes First cut of code for loading Win32 plugin dlls. Implement
400 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
401 and implement a dlfcn.h file based on opengroup's definitions of
404 kes First cut plugin directives.
406 kes Apply patch from bug #1049 to prevent stripping the path on a
408 kes Attempt to fix bug #1047 where stripping a path corrupts the
409 heap. Waiting for feedback.
410 kes Correct the Mount message not to suggest labeling a new tape
411 when doing a restore. Submitted by email by John Stoffel.
412 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
413 FD by using casting. Reported in bug #1042.
415 kes A bit of crypto cleanup. More later.
417 Release Version 2.2.8
419 kes Apply patch from Martin to correct bug #1040, bscan sets existing
421 kes Fixed important spelling error in doc -- bug #1045.
423 ebl Fix bextract to be able to extract non-portable Win32 data to
425 kes Move initialization of read/write res lock earlier in the code.
426 This fixes the crash with a null conf file. This fixes bug
428 kes Redefine CURES in lib/parse_conf to be URES and move it all
429 into lib/parse_conf.c -- this responds to bug #1042, but does
430 not fix it. The fix is not to compile with FORTIFY_SOURCE.
431 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
432 the trunk SVN. I don't think this was reported as a bug.
434 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
436 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
438 kes Add DataDespooling and DataCommitting status (committing is
439 the last despooling).
440 kes Finish implementation of new reservations code noted below.
442 kes Fix bsnprintf for float point numbers. I broke recently when
443 parameterizing some variables. This fixes bug #1036.
444 kes Undo recent reservations changes ... will apply them later
445 when they work better.
447 ebl Fixes #1034 which cause mysql to hang the connection after 8h
448 ebl Change default statistics target of filename.name and path.path
449 fields for PostgreSQL. This speeds lookup by indexes. Thanks
451 kes A few more tweaks to new reservation code. Make sure to clear
452 vol released flag when retaking volume. When reading label and
453 label is bad mark volume unused. When recycling, mark volume
454 unused so it can be renamed.
456 kes Fix reserve_volume() so it doesn't release a volume in use
457 (i.e. a volume entry not marked released). This should be
458 the last part needed to fix bug #1018.
460 kes Move Heartbeat documentation from Job to Director resource.
461 This fixes bug #1033.
463 kes Fix existing switch drive SD code to call autochanger to release
464 any old volume. This must be done to keep the autochanger from
465 releasing subsequently newly reserved volumes in doing a close().
466 This should fix bug #1018.
467 kes Fail if attempting to get console input in batch mode. This
468 should help fail RunScript console commands that are incomplete.
469 kes First cut implementing switch_drive() in SD (not actually called).
471 kes Implement first cut running console commands in a RunScript.
473 ebl Fixes bug #1028 where 'Selection Type' option was not usable
475 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
478 Release Version 2.2.7
480 kes Add new free_tls() entry point so that Win32 builds.
481 kes Fix compile warning in src/lib/util.c
482 kes Fix entry point for edit_job_codes() so that Win32 builds.
483 kes Fix seg fault Frank Sweetser reports in regression testing
484 on his systems. The problem was that the original author of
485 bsnprintf.c did not take into account the side effects of
486 using ++x in the argument to a #define.
487 kes Make SD protocol backward compatible with version 2.2.x.
489 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
490 because Bacula no longer restores sockets.
491 ebl Always use ignorecase fileset option on win32 FD.
493 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
494 that implements double quoting include names in conf files,
495 and also allows piping input by having the first character
496 be a vertical bar (|).
497 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
498 that implement %f in RunScripts to pass the FileSet name.
499 kes Skip leading | when lex input comes from a pipe as suggested
500 by Michael Stapelberg <michael@stapelberg.de>.
502 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
503 Nerijus Baliunas <nerijus@users.sourceforge.net>
505 kes Implement Plugin Directory and plugin events.
507 kes Implement a security enhancement: TLS authentication but no
508 encryption. Enabled by setting 'TLS Authentication = yes'.
509 Note when this is on, TLS encryption is turned OFF!
511 kes This patch corrects a problem where the maximum concurrent storage
512 jobs counter gets out of sync during restore jobs causing jobs to
513 'wait on max Storage jobs'. This patch fixes bug #1009.
515 kes This patch fixes bcopy so that it produces correct Volumes.
517 kes This patch eliminates spurious output to the console during a VerifyVolume
518 job that contains encrypted data. It fixes bug #1024.
520 kes This patch prevents the 'status dir' command from trying to use a scratch
521 volume and possibly moving it from one pool to another. This patch fixes
524 kes Add new include to postgresql.c suggested by Marc Cousins so
525 that it compiles correctly with pgre version 8.3.
527 kes Fix --archivedir addition to configure. Replace it with
528 --with-archivedir in configure.in This fixes the regression
530 kes This patch fixes bug #1012 where the job is canceled because
531 of Max Run Time exceeded when the job has not yet started.
533 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
534 one 'part' to write. Instead of each part being stored on disk,
535 written to DVD, then deleted from disk, all parts are written to disk,
536 and only the last is written and deleted from disk.
537 kes This patch fixes the status command to include the formating string for
538 JS_AttrInsterting. It fixes bug #1021.
539 kes This patch should fix the Mac OS X build problem on the latest
540 Darwin, where sys/types.h was not included correctly (apparently
541 due to a change in the Mac headers). The solution was to explicitly
542 ensure that it is defined for the ./configure.
543 This patch also has a rebuild of configure that includes the Debian
544 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
545 kes This patch should ensure that queued messages to the console are
546 displayed as soon as possible. It should fix bug 1007, but has been
547 reported not to work.
549 kes This patch fixes the infinite loop when trying to increase the
550 maximum number of volumes in a Pool during the add command.
551 This patch fixes bug #1008.
553 Release Version 2.2.6
555 db Remove extra data on estimate command in joblist for bat.
557 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
558 really change anything, but is the beginning of doing it *right*.
559 To do it completely right the LastWritten date must be passed to
560 the SD, but it is not yet done.
561 kes Minor tweaks to some bat restore SQL.
562 kes This patch fixes bug #1003 where putting the message output from
563 a Verify job into the catalog results in a recursive loop. The problem
564 seems to show up only with postgresql (to be verified).
565 kes Correct %x to %p in postgresql debug statement.
567 kes Fix bug #942 where lots of emails where generated when the heartbeat
568 interval was low and Bacula wanted a different tape from the one in
571 ebl Add new SD despooling attributes and Dir inserting attributes
572 job status codes in the catalog (Status table).
574 ebl Use qmake-qt4 instead of qmake when available (debian system).
576 kes Add a security warning to src/cats/make_catalog_backup.in indicating
577 that passing the password via the command line (arg 3) is insecure.
578 This responds to bug #990 (it doesn't fix it).
580 kes Set default debug_level to zero. This corrects bugs #991 and #993.
581 kes Fix a crash in bat when it cannot connect to the Director for example
582 if the Director is not running.
583 kes Remove redundant INDEX (JobId) from File table in the trunk.
585 kes Make explicit exception to GPL in LICENSE to permit linking
586 the Win32 FD with Microsoft VSS code.
587 kes Apply the Solaris package patch from
588 Masopust, Christian <christian.masopust@siemens.com>
589 kes Apply the patch to optionally add a timestamp in the debug output
590 submitted by Mariusz Czulada <manieq@wp.eu>.
592 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
593 backend (sql_strerror). Fixes bug #989
595 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
596 It applied with no problems.
597 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
599 kes Redirect stderror to stdin on mt status command in mtx-changer.in
600 since the status is returned on stderr on Solaris.
601 kes Activate Close button on tray-monitor window. This fixes
603 kes Check for NULL item in parse_conf.c before calling it. In the
604 case of Device, there is no item and this caused a seg fault when
605 Device appears in the conf file.
606 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
607 avoids pulling in config.h multiple times in some new code.
609 kes Fix spurious warning message printed when creating a volume with
610 a LabelFormat. This fixes bug #976.
612 Release Version 2.2.5
614 kes Add JobId in place of Job name in all the Jmsg() output.
615 kes Correct the APP_DESC for the Win32 storage service (remove an e).
617 kes Make maxvol-test and new more strict maxvol2-test work.
618 kes Print JobId in all Jmsg() job output.
620 kes Add new SD despooling attributes and Dir inserting attributes
621 job status codes. This fixes bug 961.
622 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
624 kes Fix doc issue. This fixes bug #963.
625 kes Fix listing performance problems in bat. Pointed out by
627 kes Remove old debug code.
628 kes Fix bat code that tests for Win32. This should fix bug #968
629 kes Query 5 list wrong Vol after migration. This fixes bug #960
631 ebl Fix #969 where user can't change Replace option in restore menu.
633 kes Save jcr in thread specific data (tsd) for each thread.
634 kes Make Dmsg() print JobId as -%u.
635 kes Make Jmsg, Emsg, and others automatically pickup the jobid
636 for the thread if it exists.
637 kes Remove old reservation debug jid code.
638 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
639 ebl Add an option that permit to specify spool size in job
640 definition. (Applying patches/testing/spoolsize_per_job.patch).
641 You must upgrade SD and DIR at the same time.
642 dvl Add new configuration item --archivedir
643 dvl Adjust regression tests to use tmp not /tmp. This will allow
644 multiple concurrent runs of the regression tests.
646 kes Fix race condition that drops final block written to volume.
647 This happens in rare cases with multiple simultaneous jobs
648 when the Volume fills. This fixes bug #964. May be related
649 to bug #935 and possibly #903.
650 kes Eliminate more strerror() and replace with bstrerror().
651 kes Remove BSD getopt and replace with unrestricted IBM version.
652 kes Fix Win32 build for changed calling sequences.
653 kes More tweaks to the mount volume routines to get everything
654 right. Changed variable name from find to have_vol, which is
655 much easier to understand.
656 kes Enhance btimer debug code.
658 kes Fix FD->SD authorization failure, which was due to spurious
659 wakeups from a pthread_cond_timedwait(). Simply check the
660 predicate before continuing. This fixes bug #953.
661 kes Add const char where needed (more to do). Remove temp debug code.
663 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
664 kes Don't overwrite error message in check_tables_version.
666 kes Unlock batch insert tables with same calls used elsewhere.
667 kes Allow starting 59 jobs a second.
668 kes Make SD session key more random.
669 kes Add retry for SQLite opening db if it fails. Probably helps
671 kes Suppress extra error messages during batch insert failure.
673 kes Add jcr to timer packets so if killed message can be sent to job.
674 kes Add JobId to all Dmsg() output.
675 kes Put some FD auth code on dbglvl rather than fixed.
676 kes Return insert attributes error message in db msg buffer to avoid
677 false error messages. Helps fix bug #966.
678 kes Separate batch init error messages. Probably helps fix bug #966.
679 kes Make SD code that contructs attribute insert check string lengths
681 kes If Dir gets an error during inserting attributes, cancel SD.
682 This reduces unnecessary error messages.
684 kes Correct search boolean for getting Volume info
685 ebl Cleanup batch insert code. Probably fixes bug #965.
686 kes Back out one small change to the reservation system (reserving a volume).
687 kes Rework how a Volume is mounted. It is now much more intelligent and
688 will always attempt to use any mounted volume if possible and reduces
689 calls to the Director asking about volumes.
691 kes Turn off some code when batch insert not enabled.
692 kes Edit FD name in connect error messages.
693 kes Rework the reservation system to take into account that the Director
694 might give us a Volume that is different from the current one being
695 used, and to ensure that we don't exceed Maximum Volume Jobs.
696 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
697 fatal error with multiple jobs running'
698 kes Add more debug code in reservation system.
699 kes Implement maxvol-test to check bug #947.
701 kes Add code to handle tray monitor separated from Win32 FD.
702 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
704 kes Add missed return in fixing verify bug -- trunk only.
705 ebl Fix a command parser issue causing a director segfault.
706 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
708 kes Increase the max block size to 4MB fixes bug #957.
709 kes ERABT if user sets min block size > max block size. Fixes bug #956.
710 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
711 is not properly mounted (recognized) during a poll.
712 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
713 Job that has differences reports Verify OK.
714 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
716 ebl Add an option to operate on all pools with update vol parameters.
717 This complete the project 20. Patch from Nigel Stepp.
718 ebl Add history support to bconsole when using readline.
719 Using Ctrl-D to exit doesn't update .bconsole_history
720 kes Modify new volume algorithm to use max MediaId for generating next
721 volume number rather than the count of Volumes. This should essentially
722 eliminate the failure rate if some volumes were deleted. Bug #921.
723 kes Begin implemention of Optimize Job Scheduling.
724 kes Implement restore callback that Dirk and I agreed on for bat
725 restore. This fixes bug #928. Restore of backup of zero files fails.
726 kes Fix SQL Catalog logging which broke with new db_escape_string
729 Release Version 2.2.4
731 kes Fix bacula_cats.def for new db_escape_string().
732 kes Increase size of name string when FD making connection to SD.
733 May fix bug #953. FD->SD connection failure.
735 kes Add code to help Dan debug 2drive-incremental-2disk test.
736 kes Add code to try to fix bug #908.
737 kes Add waits to multiple exit detection code to try to force pid
738 file to always be deleted.
739 kes Restore good dev.tar.gz to rescue set appropriate binary property.
741 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
742 trying to switch drives by checking for blocking before unblocking.
744 kes Cancel storage daemon in all cases where FD reports error. This
745 should fix virtually all cases of bug #920.
746 kes Fix db_escape_string() for MySQL which did not compile.
748 kes Fix error message that was clobbered when Dir tells SD it does not
749 have write permission on Volume. This should fix a minor point
750 in bug #942, but not the main problem.
751 kes Add code to cancel job in SD if FD connection fails. This should
753 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
754 dvl Pass jcr and db into db_escape_string() to enable better escaping
756 kes Fix migration code to get correct Volume name with multiple volumes
757 by skipping |. Fixes bug #936.
758 kes Implement patch supplied by Landon to fix bug #944 where using
759 TLS with bconsole uses 99+% of the CPU.
760 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
762 kes Move patches into patches directory.
764 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
767 ebl Using 'm' in bconsole will show messages like before,
768 and not memory usage.
769 kes Fix bug #935, and probably also bug #903 where files were not
770 restored. MediaId was not properly set in JobMedia record after
773 kes Suppress chown and chmod error messages if the FD is not running
776 kes Apply Martin Simmons' patch that should turn off the new API usage
777 when batch insert is turned off allowing building on older
779 kes Add ./configure search in qwt-qt4 for qwt package
781 kes Bacula is now free of 3rd party GPL copyrighted code!
783 kes Add guid_to_name.c/h which replace idcache.
784 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
786 ebl Detect if new PosgreSQL batch insert API is present.
787 kes Correct incorrect mempool call causing Director crash. Occurs on
788 systems without va_copy().
789 sb Update spec files for 2.2.1 release
791 kes Fix memory pool call in ua_output.c. bug #934.
792 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
793 Add test program to fnmatch.c
795 kes Integrate patch to README.vc8 from
796 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
797 edit it to get it into Unix patch format.
798 kes Implement mkpath.c to replace old FSF makepath.c
800 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
802 Release Version 2.2.1
804 kes Update POTFILES.in
805 kes Cleanup a few underquoted AC_DEFUNs in configure
806 kes Apply patch from Martin Simmons that adds a test for va_copy to
809 kes Fix bug #921 by increasing the number of tries to create a new volume
811 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
812 can be called multiple times. Implement a version for machines
813 without va_copy() that gets a big buffer.
815 kes Integrate more portable zone offset code into bsmtp.c
816 Submitted by Attila Fülöp.
818 kes Fix bad SD->FD return status reported by
819 (James Harper) <james.harper@bendigoit.com.au>
820 ebl Fix a bug in read_close_session which return random status
821 thanks to James Harper
823 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
824 and directory names during restore of single file/directories.
825 kes Add sanity checks to .sql command when string is empty. Hopefully
826 that will resolve Dirks Director crash.
828 kes Apply patch submitted by Martin Simmons that corrects a seg fault
829 in the bsmtp chat subroutine when debug is >= 10.
831 kes Fix Director crash when running bat SQL queries.
832 kes Add David's notes on Item 8: Copy pools.
834 kes Rework projects file to be current and ready for a vote.
835 kes Enhance lex scanner error message.
837 kes Tweak LICENSE file to mention BSD code.
838 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
839 if specified on the ./configure.
840 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
841 This class is intended to allow us to open a second bsock to the
842 Director while in the restore subdialog.
844 kes Fix configure to create bat Makefile before creating dependencies.
845 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
846 kes Add a tooltip to the tray monitor.
847 dvl Set the Director's PID file before dropping privs. This fixes
850 kes Update AUTHORs file
851 kes Increase the default max concurrent jobs to 20 in FD and SD to
852 correspond with the default .conf files.
853 kes Rewrite the Win32 service routines. This eliminates the 3 copies
854 some different, of the same file created by RN when porting the
856 kes Rearrange some of the Win32 directories and the placement of the files
858 kes Set DEVELOPER flag in version.h
860 ========================================================================
861 Release Version 2.2.0
863 kes Apply a second doc patch from Marc.
864 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
865 improves the tips section that discusses how to setup multiple
868 kes Update bat README file.
869 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
870 corrects a typo in the Recycle status check in db_find_next_volume().
871 This will probably fix a number of annoying problems with multiple
873 kes Modify most of dird/msgchan.c to use bsock class calls rather than
874 bnet calls -- no functionality change.
876 kes Modify the Verify output to specify if files are missing on
877 the Volume(s) or disk. Fixes confusion in bug #916.
878 kes When more than one Volume is read in a migration job, the last
879 Volume bytes reported are from the last read volume rather than
880 the last written volume. Fixed. This fixes bug #910.
881 kes Fix display of Recycle flag after update volume=foo recycle=yes.
882 It previously printed New Recyle flag is: no. This fixes bug
885 kes Correct seg fault when switching tape drives during restore.
886 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
887 be used until after 2.2.0 release.
889 kes Remove fnmatch() in SD that permitted wild card specifications.
892 kes Fix %g in filename returned by SQL for browse tree reported by
894 kes Fix configure so that it puts config.out in the cwd rather than
896 kes Attempt to fix the locking problem reported by Eric in bug #906.
897 kes Make berrno class to leave errno unchanged after constructor call.
898 kes Make bnet_server use the heap rather than the stack to allocate
899 its socket fd pointers to avoid a crash at termination. Problem
900 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
902 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
903 and putting it in depkgs-qt along with Qt4.3.
905 kes Rework code in acquire.c that switches drives for reading when
906 the Media Type does not match. This should fix bug #906
908 ebl Fix a director segfault during job setup #907
909 kes Correct seg fault in postgresql when first operation returns no
910 rows. Fixes Dirks File browser problem seg fault with bat.
912 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
913 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
916 kes Implement PopUp YES/NO dialog for bat.
918 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
920 kes Correct RunScript to terminate job in FD on failure.
921 kes Change abort_on_error and AbortJobOnError to fail_on_error
922 and FailJobOnError in RunScripts.
923 kes Minor tweaks of code formating in RunScripts, principally to
924 avoid depassing 80 columns.
926 kes Eliminate one #ifdef Win32 in bsmtp
927 kes Implement grow tool to grow a file for testing very large databases.
928 kes Add big-vol-test to test Bacula seeking with > 5GB.
931 kes Modify find_next_volume() to return all values in Media record.
932 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
936 kes Update Release notes
938 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
939 Warning, in previous beta version, all media get from scratch keep their
942 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
943 This should fix bug #842. Made a note to look at removing the temp
944 files at the end of the install.
945 kes Add ability to mount and unmount a file device providing it is
946 marked as being removable and has the appropriate mount and unmount
947 commands defined in the Device resource. This fixes bug #830.
948 kes When applying a storage override, release all previous storage
949 definitions rather than just prepending the new storage.
950 This should prevent a good deal of confusion.
952 kes Implement ./configure search for qwt libraries.
954 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
955 Win32 FD. This should fix bug #893.
956 kes Remove an unnecessary beep in Win32 init code.
957 kes Update copyright dates in Win32 executable about boxes.
958 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
959 code with a BSD getopt.c and getopt.h.
960 kes Remove sched.h from the Win32 compat directory -- not used.
961 kes Remove the Exit menu item from the Win32 tray monitor. If you really
962 need to shut it down, do it through the services panel or the command
964 kes Remove some inappropriate Bacula FSFE copyrights.
965 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
966 kes Fix regress config non-portable test as pointed out by
967 Florian Heigl <florian.heigl@gmail.com>
968 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
969 as pointed out by Florian Heigl <florian.heigl@gmail.com>
971 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
972 Reported by Frank Sweetser.
976 kes Fix client-only build.
977 kes Integrate client-only fixes for bsys (initgroups) and conio from
978 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
979 kes Make arguments to get_scratch_volume() in same order as other
981 kes Rework the prune_volumes() subroutine so that after purging and
982 no volume found in desired pool, it will check for a scratch
983 volume. This prevents recycling the whole scratch pool.
984 kes Add code to status storage to print boffset_t (largefile support).
986 kes Move qwt (Graphics libarary for Qt4) to depkgs.
987 kes You now need a --with-qwt=<dir> to be able to build bat.
988 kes Update src/win32/cats/bacula_cats.def to include the new
989 db_get_query_dbids() call on Win32.
991 kes Correct a problem when selecting a scratch volume and moving
992 it to another pool that lost some columns.
993 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
994 kes Enhance Autochanger error messages to include Volume and device name.
995 kes Rework prune_volumes() code to take account of InChanger flag,
996 and to handle recycling volumes going to the Scratch pool and
997 current pool because the RecyclePool directive.
998 kes Implement a better and more efficient db_get_query_dbids() to
999 handle creating and passing back a list of DBIds.
1003 kes Start work on new more efficient DBId subroutine. First use
1004 will be for recycling volume to Scratch inchanger.
1005 kes Increase number of JobIds in pruning from 1000 to 10000.
1006 This to be replaced by above routine.
1007 kes Begin implementation of building Qt4 on Win32.
1008 kes Correct typo in fix I added for bad TLS shutdown.
1009 kes Pull 2.0.3 patches into patches directory.
1010 kes Update Release notes. Include qt-console in line count.
1011 kes Update Projects file.
1013 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1014 bug in migration code where a job that spanned two volumes
1017 kes Implement new BST_DESPOOLING blocked state. Change from locking
1018 during despooling in SD to blocking. This means that other threads
1019 can work with the device structure, in particular the reservations
1020 system while despooling.
1022 kes Fix return in reservation message queue that missed clearing
1023 the jcr lock (implemented 26Jun07 below).
1024 kes Rename a number of dev methods to make locking function names
1026 kes Document locking in lock.c. Move lock structures to new file
1029 kes Move reservations message lock to lock jcr only this
1031 kes Move main SD locking code into lock.c (new file).
1032 kes Update Win32 build to include lock.c
1036 kes Dirk committed the qwt library code for drawing graphs in bat.
1037 kes Tweak install of qwt so that it is integrated with ./configure.
1039 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1040 out by Eric (my typo).
1041 ebl Fix configure.in to get batch mode enable
1042 kes Return correct string from authenticate.cpp in bat when connecting
1044 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1045 spurious line drops when using TLS.
1046 kes Do not file reparse points when restoring a file that already
1049 kes Implement Windows reparse points -- similar to directories, but
1050 we do not descend into it. This is a first cut. They seem to
1051 be backed up, but restore is not yet tested.
1052 kes Remove restore_blocking in tls code when shutting a socket to leave
1053 it in blocking mode. Hopefully this will fix the encryption bug
1054 reported by Frank Sweetser.
1055 kes When opening a file for backup, tell the OS that we are going to
1056 read it sequentially -- optimization.
1057 kes Change variable names in authenticate_director() to not conflict
1058 with member names in bat. Caused great confusion with compiler,
1061 kes Queue openssl error messages in case of comm problem.
1062 kes Do shutdown() call if socket terminated.
1063 kes Remove some duplicated code in tls.c
1064 kes Move more of the bsock member variables into private and access
1066 kes Add Frank Sweetser's tls-test to the regression suite.
1068 kes Add Swedish sv.po file
1070 kes Don't print clock skew message in FD if less than 3 seconds diff.
1071 kes Add a bit of VSS info to status client.
1072 kes Implement a first cut of Vista VSS, using Win2003 code.
1074 Release: 2.1.20 beta
1076 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1077 loaded tape but uses first drive).
1078 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1079 This was indeed a Win32 issue.
1081 kes Simplify search of autochanger for in-use Volume.
1082 kes Fix exit condition of check for in-use volume. kes Remove
1083 inappropriate my_postgresql_free_result() in db_close()
1085 kes Fix bad return in FD when encryption signature not found.
1086 Probably caused a crash.
1087 kes Inhibit missing encryption signature error messages for
1088 file types where no signature computed.
1089 kes Correct inverted check on autochanger in reservation system.
1090 kes Tweak debug code in autochanger reservation.
1092 kes Add some additional locking in the cats directory in subroutines
1093 that modify packet variables called from batch insert.
1094 kes Rework how dcrs are allocated. new_dcr() can now be called
1095 with an existing pointer, and it will simply clean it up.
1096 This allows the reservation system to test various different
1097 devices, and will permit easy device changes.
1098 kes A bunch of changes all over to handle new new_dcr() calling
1100 kes Work more on the Volume management in the SD. Remember Volumes
1101 for tape drives and for autochangers (even virtual disk changers).
1102 kes When looking at the Volume list to reserve a drive, handle
1103 autochanger names correctly by interating through the changer
1104 devices. Also call the Director to see if a Volume is suitable
1105 for the current job.
1106 kes Fix some bugs in bscan. Make sure all media records are written.
1107 Make sure that valid JobMedia records are written for disk files.
1108 Previously they were completely wrong.
1109 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1110 that the URLs don't change and so that the developers will all
1111 work off the same copy. Rebuild from scrach.
1112 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1114 Release: 2.1.18 beta
1116 kes Fix seg fault in FD from incorrect digest size.
1117 kes Fix argument to non-OpenSSL crypto.c subroutine.
1119 Release: 2.1.16 beta
1121 kes Remove a few malloc()s from the encryption code.
1122 kes Use the class calls to bsock in filed/backup.c and restore.c in
1123 place of the old bnet_xxx code.
1124 kes Implement code that does an on the fly calculation of the
1125 signing digest during restore of encrypted files. It makes
1126 a best guess at the algorithm, and if it is not correct, will
1127 then revert to the old code which reads the file after it is
1129 kes Implement at least one missing crypto stream in stream_to_ascii()
1130 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1131 #877 where a reload with bad syntax causes Dir to exit.
1133 Cut: 2.1.14 beta (not released)
1135 kes Do not free a volume on a tape drive until another volume is
1136 mounted and read, or the autochanger unloads the volume.
1137 This should help the SD re-use volumes that are already mounted,
1138 and should fix bug #886.
1139 kes Apply patch from user brettedgar that allows gnome2-console include
1140 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1141 kes Apply patch from Lucien Weller that fixes day of week calculation
1142 because of DST flag problem. Fixes bug #887.
1144 kes Move find_next_appendable_volume() to after acquiring a valid device
1145 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1147 kes Unable to reproduce bug 872. However added additional testing for
1149 kes Bug #874 resolved by documenting SQLite limitations.
1150 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1151 kes Bug #881 resolved by removing typo in mtx-changer script.
1152 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1153 approval. Added a link to the wiki on the web page, and implemented
1154 a backup from http://paramount.ind.wpi.edu
1156 kes Fix update allfrompool to pass pool name.
1158 kes Convert to pure GPL v2 license.
1159 kes Fix sscanf problems reported by Peter Buschman that caused
1160 a bus error on Solaris.
1161 kes Rework (simplify) the select prompt in bat.
1162 kes Move get_jobid_from_tid() into lib and create a
1164 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1165 should definitely fix the problem of lost error messages in the
1167 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1168 kes Eliminate tcpd.h from the project. Enclose the #include from the
1169 library with extern C ...
1170 kes Add print of signal name when a signal is trapped.
1172 Release: 2.1.12 beta
1174 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1176 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1177 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1178 makes SQLit3 run 30 times faster, though a bit less safe.
1179 kes Implement --with-batch-insert in configure and detection of thread
1180 safe libraries. It is on by default, but turned off if no thread
1181 safe library (e.g. SQLite 2) is available.
1183 kes Fix Bacula PostgreSQL buffer overruns.
1184 kes Do better checking for NULL results returned from PostgreSQL;
1185 implement retry for failed queries; clear results buffer after
1186 failed query. Hopefully this will correct the PostgreSQL failures.
1188 kes Implement algorithm to handle only one appendable volume with
1189 Prefer Mounted Volumes = no.
1190 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1191 returned from a query.
1192 kes Make volume lock recursive.
1193 kes Implement an additional volume reservation algorithm that
1194 starts by considering all reserved volumes then uses the
1195 old brute force algorithm of searching the resources to
1196 find a suitable device.
1197 kes Add new reservations debug code and refine the old code.
1198 kes Update the win32/dll/bacula.defs file.
1200 kes Tweak reservations algorithm to permit a few more cases, i.e.
1201 volume reserved, but on different drive, ...
1202 kes Enhance SD status to include Pool and Media Type for drive in a
1203 more readable format (a bit longer).
1204 kes Fix PostgreSQL double free.
1206 kes Minor refactoring of restore decryption code.
1207 kes Add code to smartall.c to detect double free of a buffer.
1209 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1210 so that bsmtp will create a correct email address (mailbox only).
1211 kes Modify 'memory' command so that the buffers are listed as 'In use'
1212 to avoid confusion with Orphaned buffers.
1213 kes I reworked the OpenSSL include/lib flags to be handled in
1214 the standard Bacula way, which should fix bug #863 concerning
1215 non-standard OpenSSL libraries.
1217 kes Implement Help Browser window for bat.
1218 kes Fix reload bug that reset StorageId to zero.
1220 kes Fix TLS #ifdefing when TLS turned off.
1221 kes Ensure that when labelling a tape with Slot=0 that InChanger
1223 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1225 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1226 add DISTINCT (required by PostgreSQL).
1227 kes Implement BSOCK authenticate_director() method. Eventually will
1228 authenicate all daemons.
1229 kes Move several more functions into the BSOCK class.
1231 kes Add code to tell the OS that we no longer need a cached
1232 file that we were reading. In findlib/bfile.c. Also,
1233 only cache files that we are reading. Thanks to
1234 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1235 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1236 kes Implement script to automatically generate cats and dll .def
1237 files for Win32 dll.
1238 kes Update README.mingw32 to include new .def file generation.
1239 kes Correct typo in UTF-8 error message as reported by:
1240 jhernandez <julianhernandez@gmail.com>
1241 kes Add additional sm_check() code on debug level 1.
1242 kes Set default debug level to 1.
1243 kes Trap SIGABRT in attempt to get traceback.
1245 kes Reduce bat connect timeout from 30 to 15 seconds.
1246 kes More restructuring and implementing BSOCK class in place of
1248 kes Remove a few unnecessary malloc() tests in crypto code.
1249 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1250 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1251 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1253 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1255 kes Fix Verify InitCatalog. The attributes were not pointing to the
1256 correct saved location.
1257 kes Implement message callback so that GUI is sure to get all
1258 daemon messages. Currently displayed in a dialog in bat.
1259 kes Ignore SIGUSR2 (Bacula timer) in bat.
1260 kes Apply regress patch from bug #859 to allow regress to work
1261 with Solaris compiler.
1263 kes Begin adding TLS support to bat.
1264 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1265 clean up lex.c and make it more readable.
1267 kes Move more bnet functions into the BSOCK class.
1268 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1269 kes Complete change of berrno strerror() method to bstrerror()
1271 Release: 2.1.10 beta
1273 kes Cleanup incorrect email addresses in bsmtp.
1274 kes Make bat display initial messages rather than discard them.
1276 kes First cut of adding .mod to the run command.
1277 kes Implement auto display of messages in bat.
1278 kes Enhanced preferences to allow all Bacula output to be
1281 kes Try to make bsmtp date routines more generic.
1282 kes Fixed bug #856 autochanger documentation.
1283 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1284 kes Add new cats entry point so Win32 builds.
1286 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1288 kes Do better checking for the MySQL 64 bit libraries looking for both
1289 .a and .so libraries.
1290 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1291 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1292 kes Require the thread safe version of MySQL during configure. Thanks
1293 to Andre Noll for pointing this out.
1294 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1295 continuing in migration code.
1296 kes Apply implementation of tray-monitor font derived from gnome-console
1297 submitted by Andreas Piesk <a.piesk@gmx.net>
1299 kes Eliminate important memory loss in SQLite
1300 kes Fixed the batch insert MySQL thread specific data that was not
1301 being freed. See cats/mysql.c:db_thread_cleanup().
1302 kes Fix restore before command.
1303 kes Convert old hdr.name to name() in a few places.
1304 kes Implement update jobid command.
1305 kes Return all time_t dates in db_get_job_record()
1306 kes Stop watchdog in SD earlier.
1307 kes Put Pool just after Storage in please mount message.
1308 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1311 kes Update the po files.
1312 kes Fix Verify InitCatalog by making it cache attributes.
1314 kes Change name bacula-bat to bat for man 1 page to correspond to
1316 kes Check for client and store NULL pointers in status command. This
1318 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1319 kes Fix sign extended editing of %p.
1320 kes Clean out a little old #ifdefing in cats/mysql.c
1322 kes If time diff between DIR and FD is more than 600 seconds convert
1323 INFO message to WARNING.
1324 kes Implement heap size display in status for all daemons.
1325 kes Attempt to fix MySQL db open memory loss (not successfull).
1326 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1327 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1328 Query. This looks like a MySQL but but by doing extra releases,
1329 the memory goes away. This should fix bug #847.
1331 kes When backup fails, cancel SD before waiting for sd termination.
1332 kes If SD is waiting for FD to connect during cancel, wake up the
1334 kes Fix fsf code so that errno is correctly reported.
1335 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1337 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1338 so that Bacula doesn't later stumble into a seg fault.
1339 kes Use the term Restore Client in the restore Job report.
1340 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1341 the original job's FileSetId.
1342 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1343 spooling in migration jobs. Not yet tested.
1344 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1345 reading conf file from a pipe. However, do it with open_bpipe()
1346 rather than popen. Not yet tested.
1348 kes Fix an ugly bug where the VolCatBytes were getting updated
1350 kes Implement bconsole memory command that prints current memory
1351 usage, plus smartalloc dump.
1352 kes Clarify some error messages in backup, admin, and migrate.
1353 kes Shrink label dialog to smaller size.
1354 kes Invert Cancel OK buttons on restore to be OK Cancel.
1355 kes More strerror() to bstrerror() conversions.
1357 kes Start implementing bstrerror() in place of strerror().
1358 kes Stripping path -- seems to work.
1360 kes Prevent door and port files from being restored (mostly
1362 kes Free an unreleased buffer in compat code.
1363 kes Change console Job name from *Console* to -Console- to eliminate
1364 Win32 filename problems. Put Win32 path separator when creating
1365 Console file. This fixes bug #846.
1366 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1368 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1370 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1371 to force Win32 error message.
1373 kes First cut strip path. The data should be passed to the FD,
1374 but nothing is done with it yet.
1375 kes Enhance the digest and signature routines in the crypto
1376 library to accept a JCR and to use it to print error messages
1377 so that they will go in the Job report rather than the daemon's
1379 kes Simplify some of the verify signature code.
1380 kes Simplify a few of the alternative returns in the signature
1383 ebl Use only POSIX regex instead of GNU regex in breg.c for
1384 File relocation. It fix broken freebsd compilation.
1385 kes Convert all other Dir files to use new ua class message
1387 kes Tentative fix for missing digest signature in bug 807.
1388 kes Correct handle problem in new win32_ftruncate routine.
1389 kes Convert ua_purge.c and ua_update.c to use new ua class
1390 message routines for bat.
1392 kes Correct incorrect installation of LICENSE in Win32 installer.
1393 kes Display LICENSE at the beginning of the Win32 install.
1394 kes Attempt to correct the need for the png files to be installed
1396 kes Reapply my bat.conf install script in qt-console. I think I
1397 editted bat.pro instead of bat.pro.in and it was lost.
1398 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1399 the /var/lock/subsys for subsysdir. Also corrects typos in the
1402 kes First cut update job.
1403 kes Correct configure to include qmake of src/qt-console directory.
1405 kes Make restore job yes/mod/no print in one command so GUI works.
1406 kes First cut implementing backup and restore client.
1407 kes Correct editing in Verify output that caused a seg fault.
1409 kes Insure that bat.conf is not overwritten during installation.
1410 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1411 while I was implementing migration in March 2006 !
1413 ebl Cleanup file relocation, using char *RegexWhere instead of
1414 char *where + bool where_use_regexp
1415 kes Update some manpages and add bat manpage.
1416 kes Make a first cut at converting bacula.spec.in for bwx-console
1418 kes Apply patch from John Goerzen to add hostname as fourth argument
1419 to make_catalog_backup script.
1420 kes Fix typos I introduced into bsmtp.c
1421 kes Make pm_strxxx() routines handle input of NULL pointer. This
1422 is to protect from NULL pointers returned from SQL databases.
1423 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1424 kes Add more debug to FIFO code -- fix fifo regression test.
1426 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1427 kes Add thread timer to bnet_connect() to break from OS if wait time
1430 kes Update Win32 build to include new files, new symbols, and
1432 kes Implement socket level heartbeat (tcp_keepidle)
1433 ebl Commit File relocation patch
1434 kes Make bat have 'make install' target.
1435 kes Warn during install if old gnome-console binary found.
1436 kes Warn during install if old wx-console binary found.
1437 kes Add -8 option to bsmtp command line to add content type utf-8.
1438 Fixes bug #809. (Character coding problem in bsmtp).
1439 kes If < is found in target (from, to, cc) then do not enclose the
1440 target in < > in bsmtp. Fixes bug #772 (malformed address).
1441 kes When printing certain items in dbcheck, stop after 300000.
1442 Fixes bug #822. (dbcheck loops).
1443 kes Incorrect status in Dir after waiting for mount with poll set.
1446 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1448 kes Print waiting to reserve a device every 5 mins.
1450 kes Don't call close_part in label.c if tape and relabel.
1451 kes Don't free volume if busy in close() -- should help with
1453 ebl Fix #824 RunScript bug (After script could be execute twice)
1454 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1455 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1456 Add a regression script to test RunScript
1458 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1461 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1462 deprecated. No additional bugs will be fixed, and they will be dropped
1463 in a future release (probably 2.4.0).
1464 kes Change name of wx-console to bwx-console to make it more Bacula
1466 kes Change the name of gnome-console to bgnome-console to make it
1469 kes Some time in March, a Feature Request with patch from Jorj Bauer
1470 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1472 The ability for the director to validate a Client (FD) CN against
1473 an arbitrary set of patterns rather than the hostname, with
1474 A new 'TLS Allowed CN' set of directives which are implemented
1475 in the Client resource. Then pattern matching is used in place
1476 of hostname matching against the Certificate's CN. As an example, we
1477 have certificates which (a) use a local CA, and (b) have a CN of the
1479 kes Add new/changed entry points to Win32 build
1480 kes Create unaccepted-projects for projects that are not accepted.
1481 kes Simplify locking in the reservations system.
1482 kes Add more debug code in reservations.
1483 kes Make sure error condition on reserving a volume is handled correctly.
1484 kes Correct handling of volume_in_use.
1485 kes Correct handling of initializing a device.
1486 kes Move handling of broadcasting releasing a device into release_device().
1487 kes Correct attaching dcr to dev so that it is only done if device
1488 is properly initiated.
1490 kes Locking debug level tweaks in SD.
1491 kes Tweak new Volume code.
1493 kes Add exec external-command [wait-seconds] to bconsole. This
1494 executes the external-command. Note! normally external-command
1495 should be enclosed in double quotes.
1496 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1497 it should normally be off in a production system.
1499 kes Implement die command for SD so that we can force it to dump.
1500 kes Implement SD lock debug code.
1501 kes Implement new algorithm for keeping Volume list in SD. It
1502 is now owned by the device.
1504 kes Implement new code for freeing in use volumes that should
1505 resolve if not all, some of the problems of multiple drive
1506 tape conflicts described in bug 801.
1508 kes Fix gui/bacula-web/images files in svn.
1509 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1511 ebl Fix a bug in batch mode (in string escape)
1512 kes Correct migration prune SQL typo that crept in in a
1513 recent 2.1.x change.
1515 kes Move bnet_despool() into class in bsock.c
1516 kes Modify job report to include director name and Build OS.
1517 kes Move drop root privilege and check_catalog() before fork.
1518 kes Add update database scripts (version 9 to 10) to updatedb directory.
1520 ebl Check size and age of each file after its backup to see if
1521 it has changed during backup, if 'checkfilechanges' is set.
1522 The FD will do an extra check (stat(2)) after
1523 each file backup. mtime, ctime and size are compared with
1524 'before backup' information. If time or size mismatch, an
1525 error message will be generated. You must upgrade FD to use it.
1527 kes Make database name and user configurable
1528 --with-db-name=xxx --with-db-user=xxx
1529 kes Add back database type to message.c for debugging.
1531 kes Implement dir_sql() which issues an SQL query.
1532 kes Modify bat medialist to use dir_sql() and do some minor C++
1533 formatting as well as eliminating a number of pointers, simplifing
1536 kes Fix some of the mtx-changer grep commands for tape label readers.
1537 kes Convert a number of bsendmsg into the appropriate send/warning/error
1538 message class calls.
1539 kes Suppress the using database message in the .sql command.
1540 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1542 kes Add context menu for floating a window.
1543 kes Some minor cleanup and name changes in qt-console
1544 kes Add doing mt setblk 0 in Win32 mtx-changer.
1545 kes Apply Martin's bug fix to move definition of ENODATA for
1547 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1548 sqlite2 and sqlite3.
1550 kes More pruning cleanup.
1551 kes Turn on wait_for_drive by default in mtx-changer.
1552 kes Turn on Batch insert code by default as it now passes regression.
1553 kes Add ./configure --enable-bat to enable building of Bat.
1554 No install yet though.
1556 kes Implement a new .sql command for bat.
1557 kes Implement code to turn off pruning in obtaining the next volume.
1558 Pruning is turned off for the status dir command, but turned on
1559 for SD requests and for the list nextvolume command.
1561 kes Correct Qmsg() that was not updated correctly when committing a
1562 previous change (probably the recent TLS patch).
1564 kes Write new subroutine is_volume_purged() that explicitly checks
1565 if the Volume is purged, and if so marks it as such. This should
1566 resolve problems reported about needing to mount twice to recycle
1568 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1569 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1570 amount of duplicated code.
1571 kes Do volume pruning only for the Media Type desired (reduces pruning time
1572 if multiple Media Types are in the same pool).
1573 kes Implement more detailed info in the Job report for the Bacula version
1575 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1577 ebl Add bbatch tool to bench database and insert mode.
1578 Fix sql quote stuff in batch mode
1579 Fix sql stuff for mysql
1581 kes Correct problems with am/pm scheduling. Fixes bug #808.
1582 kes Implement new prunning code that prunes up to 1000 jobs at
1583 the same time. The same technique can be applied to a number
1584 of other prune/purge subroutines.
1585 kes Add an insanity check when starting a new tape job to ensure
1586 that the tape position has not been changed. If so fail the
1588 kes Fix Win32 build for dlls to add the folllowing:
1589 src/lib/bsock.c -- new file with new entry points
1590 src/lib/dlist.c -- new entry points
1591 src/cats/sql_create.c -- new entry point
1592 src/cats/sql_cmds.c -- new DATA item exported
1594 ebl batch mode cleanup bscan-test is ok now.
1595 kes Implement SD code to check length of disk volume before appending.
1597 kes Correct return status on db_batch... routines.
1598 kes Add call to db_write_batch_file_records() to migration code.
1599 ebl Fix AfterJob timing
1600 kes Move the checking of the database in initializion of the Director
1601 to after we drop privileges. This avoids the need for both root
1602 and bacula access to the DB.
1603 kes Correct a misplaced variable definition in src/filed/backup.c
1604 kes Correct how the new batch insert db_create_attributes_record()
1605 uses the arguments. Caused a seg fault in bscan.
1606 kes Implement lock() and unlock() methods in DEVICE class.
1607 Implement block() and set_block(xx) methods in DEVICE class.
1608 kes Modify bnet_connect() so that it uses time() to check for the
1609 wait time expiring (on some OSes, some system calls may not
1610 return immediately).
1611 kes Modify Verify to obtain the previous JobId when it is actually
1612 running rather than at schedule time (as it was in 1.38.x).
1613 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1615 kes When checking pid in pid file, continue running if the pid is
1616 the same as ours. This occurs on IRIX after a system crash.
1619 kes Extend new GUI API.
1620 kes Make the ua structure a class, and implement send_msg(),
1621 error_msg(), warning_msg(), and info_msg().
1623 kes Apply fix from for building wx-console on the Mac from
1625 kes Implement new select mechanism for GUI programs.
1626 kes Reorganize initialization of stackedWidgets in bat.
1628 kes Add updated nagios plugin supplied by Christian Masopust.
1630 kes More bat implementation.
1631 kes File migrate bug with Pool Occupancy using mediaid instead
1632 of jobids. Fixes bug #795.
1633 kes Fix orphaned buffers in filed backup and verify due to
1634 crypto buffers not freed during errors. Fixes bug #789.
1635 kes Extend new GUI api code to tree commands.
1636 kes Ensure that tree and dot commands check console ACLs.
1637 kes Permit marking directory with trailing slash.
1638 kes Allow 20 console connections (instead of only 10).
1640 kes Add smartctl call to bacula-sd.conf as an example of getting
1643 kes Modify jobq.c to let simultaneous restore jobs run. This may
1644 cause them to fail if they cannot get a drive.
1645 kes Add Client Connect Wait to Storage daemon to permit users to
1646 modify the time the SD waits for a FD connection.
1648 kes Correct virtual changer check which was backwards. This caused
1649 volumes to be unloaded into slots already occupied.
1651 kes Apply Command ACL filter to JobId list in restore command.
1652 kes Correct typeo in var.c patch.
1654 kes Don't let Bacula prune File or Job records for the current Job.
1655 kes Fix variable substitution pad + inc bug reported (with patch)
1658 kes Correct SQLite log table index as reported by Luca Berra.
1660 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1662 kes Begin implementing new comm signals for API.
1663 kes Fix a few places in lib/message.c where the open fd may
1665 kes Continue implementing lib/bsock.c (real class). Make jcr,
1666 who, host, and port private. There are new methods to access
1667 them for non-class use. This required touching a number of files.
1669 kes Add LANG=C to autoconf/randpass so it works with languages other
1670 than English. Fixes bug #788.
1672 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1674 You will not be able to generate Include/Exclude list any more.
1675 It will be fixed soon.
1676 If you want to use this, you can apply
1677 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1679 kes Restore of sockets created false error messages because Bacula
1680 no longer restores sockets, but the code was still trying to
1681 set the attributes on a non-existent file. Reported by a user.
1682 ebl finish RecyclePool feature
1683 Media will takes Pool.RecyclePool
1684 when moving from Scratch to a Pool or when user will do
1685 update volume=xxx frompool
1686 To use it, add RecyclePool = aPool to your Pool resource
1689 RecyclePool = Scratch
1693 kes Expand new BSOCK class adding signal() and new BNET signals.
1694 kes Begin enhancing the dot commands adding a new API function
1695 that returns more information and will make it easier
1696 to interface to the Director from a program.
1698 kes Make DEVICE fd private. Its new name is m_fd, and can be
1699 obtained with dev->fd() outside the class. This is the
1700 first of many DEVICE members to be made private.
1701 kes Implement Michael Renner's idea on having a virtual disk
1702 changer. I made some minor modifications (e.g. I did not
1703 implement the Virtual Changer directive, but simply set
1704 the Changer Command to an empty string.
1706 kes Implement a BSOCK send() method that writes the whole record
1707 in a single write() request rather than in two.
1708 ebl add update volume=xxx recyclepool=yyyy
1709 volume takes recyclepool from pool when using update volume=xxx from pool
1711 kes Fix encryption deblocking bug, which caused some restored files
1712 to be truncated. This fixes bug #763.
1713 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1714 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1716 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1717 ebl Use btime_t instead of uint64_t in media patch.
1719 kes Optimize the use of the database a bit in the Status dir command.
1720 Only open it when needed, ensure that if any previous database
1721 was opened, it is closed.
1723 kes Correct VolCatBytes bug from media patch.
1724 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1725 in the case of orphaned records.
1726 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1727 and File records in 300K chunks to be more efficient. This
1728 idea came from Juan Luis Frances (if I remember right).
1729 kes Apply Eric's scratch patch that moves a purged Volume to
1730 the RecyclePool. Question: how is RecyclePool set? what
1731 happens to the ScratchPool?
1732 kes Apply Eric's media patch that collects read/write media
1733 times as well as byte counts. This patch requires a
1734 simultaneous upgrade of the DIR and SD. Note, there
1735 should be some way to turn off timing. I'm not sure
1736 times are in Bacula units.
1737 kes Apply Eric's batch-insert patch.
1739 kes Update projects list.
1741 kes Implement Include/Exclude file lists in FD as dlists using
1742 the new dlistString class. This permits efficiently having
1743 large include/exclude lists and completes project Item 25.
1744 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1745 console is authorized to cancel the job. This fixes bug
1747 kes Modify SD so that the VolCatJobs medium record is updated
1748 at the beginning of a Job rather than the end. This
1749 fixes bug #775 where exceeding MaxVolJobs caused jobs
1751 kes Added a mutex around getting and setting Volume information
1752 so that multiple simultaneous jobs will single thread.
1754 Switch to using Subversion
1755 kes Remove src/pygtk-console/ from configure
1757 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1758 plus the entrypoints.
1759 kes Apply patch supplied that corrects debug print
1760 in canceling jobs for max run time. Supplied as
1761 part of bug #621, which was previously fixed.
1763 kes Test on job_canceled() and sd_msg_thread_done inside
1764 loop starting the message thread to avoid a race condition.
1766 kes Remove rl_catch_signal from console.c as it conflicted
1767 with the header definition. Fixes bug #765.
1768 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1770 kes Clarify some stored/acquire messages to indicate if the
1771 problem is with read or append.
1773 kes Fix memory leak with storage ids in cats/sql_get.c
1774 kes Terminate watchdog earlier to avoid reference to released
1775 memory -- reported by Jason Austin.
1776 kes Move closing the database from jobq.c to the director daemon
1777 termination routine. This fixes memory leaks for shadow jobs
1778 (i.e. migration jobs).
1779 kes Free up the unique jobid chain items in migrate.c. This fixes
1780 a memory leak problem.
1781 kes Convert some ugly looking for statements to use foreach_alist
1782 in findlib/find.c. This will facilitate converting the structures
1783 to use dlist (for large include/exclude lists).
1784 kes Fix a bug in the btree.c and btree.h routines, then rename them
1785 rblist and add them to be built in src/lib. Include some new
1786 methods written by Rudolf Cejka that make the code more readable
1787 (hides some of the ugly casting).
1788 kes Add set_next() and set_prev() methods which make the code much more
1789 readable. Also add a new dlistString class that facilitates storing
1790 strings in dlists. To be used in the large include/exclude lists.
1791 kes Make some trivial modifications to lib/tree.h that use rblist
1792 rather than dlist for storing the tree links. This was suggested
1793 by Rudolf Cejka. The result of this is that the restore tree now
1794 uses red-black binary trees rather than simple linked lists. This
1795 should give rather dramatic speed improvements for directories
1796 contining large numbers of directories/files (more than 10000).
1798 kes Fix maxruntime bug #621.
1800 ebl Implement the include JobID in spool file name project.
1801 kes Reorder projects file in order determined by Jan 2007 vote.
1802 kes Implement item #12 on project list -- quick release of FD by
1804 kes Fix open of SQLite3 db where user does not have write permission
1805 so that DIR does not crash. Fixes bug #761.
1807 kes Add back missing @ in Win32 Makefile.
1808 kes Change 'Device not configured to autolabel' from INFO
1810 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1811 which should restart an indefinite # of times.
1812 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1813 other DIR specifications.
1815 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1816 Fix path quoting in SQLite scripts.
1817 Fix problems with SHGetFolderPath.
1819 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1821 kes Fix Job restart on error bug that promotes an Inc to a Full
1822 backup. This should fix bug #755.
1823 kes Add qt-console and first cut of code.
1827 kes Fix Bacula->Documentation link on Win32 to point to index.html
1828 instead of bacula.html. Fixed bug #750.
1829 kes Return JobId in db_get_job_record() when JobId==0. This should
1831 kes Do not release source pointers when restarting a failed job.
1833 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1834 This *should* fix bug #747.
1835 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1838 kes Modify USTORE constructor to set an empty store_source string,
1839 and don't copy the store_source string in a cancel. Hopefully
1840 this will fix Arno's seg fault, bug #744.
1841 kes Add back code to disable conio in configure. Fixes bug #743.
1842 kes Correct the Options scanner in the FD to correctly handle
1843 SHA1 option, which was eating the next option. Reported by
1845 kes Add code to indicate when the SD is spooling, spool wait, and
1846 despooling as requested by Alan Brown.
1848 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob