1 Technical notes on version 2.3
5 kes Make ask_sysop_to_create... to return if waken from wait.
6 This helps get out of blocked conditions.
7 kes Experimental implementation of switch_device in reservations.
8 kes Implement FD version to allow easier protocol changes.
9 kes Add Plugin Options string -- not yet passed to FD.
10 kes Implement PluginOptions ACL.
12 kes Attempt to correct problems with restores with autochangers and
13 use counts going negative
14 kes Rework SD status command and implement API for bat. Implements
15 header, runing waitreservation, devices, volumes, spooling,
16 and terminated status keywords.
17 .status storage=xxx <keyword>
18 kes Clarify TLS error message by adding double quotes around name.
19 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
20 kes Pass jcr to tls routines so debug messages can be handled better.
21 kes Rework jobq resource allocation code, and possibly fix a bug
22 that caused reference counts to get out of sync.
24 kes Rename fd/dir plugin to use Bacula standard underscore.
25 kes Plugin work -- bring dir up to fd level.
26 kes Start implementation of VTL code
27 kes Fix Win32 build after adding new cats subroutine.
29 kes First cut at Duplicate Job implementation.
31 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
32 kes Start PluginOptions string, and refactor a bit of ua_run.c
33 ebl Apply Allan patch that permit to reset recyclepool.
35 kes Test patch -- possible fix or improvement for bug #1053
36 kes Refactor FD and SD status commands to permit new API code in
37 SD, and to fix Win32 build.
38 kes Win32 build is now working.
40 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
41 some ideas in patch from Scott Bailey.
42 kes Begin implementation of duplicate Job control.
43 kes Fix some of Win32 build after recent additions.
44 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
45 which causes the FD to detect whether or not the OS has the
46 honor no dump bit (*BSD systems), and if so, to skip backing up
47 any file with this bit set. The feature is enabled by setting
48 'honor no dump flag = yes' in the Options section of a FileSet.
50 kes Correct po warning message with datarootdir
51 kes Implement more code in dird.c to put configuration parsing in
52 a class rather than use globals.
53 kes Restructure SD status command for implementation of bat API
56 kes Suppress incorrect 'Will not descend from x into y' messages.
57 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
58 daemon globals used by parser.
59 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
61 kes Fix free of plugin_list when none exists.
63 ebl Apply accurate project patch.
65 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
66 on non-mempool object)
67 kes First cut of converting FD .status to work with bat API.
69 .status client=XXX header
70 .status client=XXX running
71 .status client=XXX terminated
72 kes Implement first cut of Copy Job.
73 kes Implement Catalog in Pool resource. It overrides catalog specified
74 in the Client resource.
76 kes Apply patch (with some difficulties) from Joao Henrique Freitas
77 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
79 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
80 ftruncate() actually works. In the case of some (cheap) NAS devices,
81 it does not, and so recycling NAS Volumes does not work. The code
82 simply unlink()s the file, then recreates it. This fixes bug #1011.
84 kes First incomplete cut of big malloc blocks for htable.
85 kes Tweak plugin code.
87 kes Plugin debug code + tweak a couple bat dialog layouts
89 kes Fix creating first JobMedia record during Migration to include
90 proper index. This caused slow restores of migrated jobs.
91 kes Temp fix to plugin name file_index.
92 kes Bacula backed up and restored a MySQL database.
94 kes Implement plugin restore.
95 kes Implement parsing of db_driver to give db_type index.
97 kes First cut of plugin restore code.
98 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
99 and do not strip paths on symbolic links.
100 kes Set catalog backup database and user name from values specified on
101 the ./configure line.
102 ebl Fix #1031 about wrong pool source information in job report.
105 kes Remove a redundant jcr argument to find_files, match_files, and
107 kes Implement '.status dir header|scheduled|running|terminated' that
108 prints the requested status section. With the exception of the
109 header, the other reports have fields separated by tabs (\t).
111 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
112 a resource embedded run command to find a since time if no explicit
113 since time was supplied on the command line.
114 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
115 that updates the state file at job termination time in addition to
116 when the daemon terminates.
118 kes First version where a plugin did a backup.
119 bpipe-fd.so created a backup file, wrote a test
120 string to it, and Bacua could restore this fabricated file.
122 kes Implement DB Driver = string for the DBI driver.
123 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
124 kes First cut of code for loading Win32 plugin dlls. Implement
125 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
126 and implement a dlfcn.h file based on opengroup's definitions of
129 kes First cut plugin directives.
131 kes Apply patch from bug #1049 to prevent stripping the path on a
133 kes Attempt to fix bug #1047 where stripping a path corrupts the
134 heap. Waiting for feedback.
135 kes Correct the Mount message not to suggest labeling a new tape
136 when doing a restore. Submitted by email by John Stoffel.
137 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
138 FD by using casting. Reported in bug #1042.
140 kes A bit of crypto cleanup. More later.
142 Release Version 2.2.8
144 kes Apply patch from Martin to correct bug #1040, bscan sets existing
146 kes Fixed important spelling error in doc -- bug #1045.
148 ebl Fix bextract to be able to extract non-portable Win32 data to
150 kes Move initialization of read/write res lock earlier in the code.
151 This fixes the crash with a null conf file. This fixes bug
153 kes Redefine CURES in lib/parse_conf to be URES and move it all
154 into lib/parse_conf.c -- this responds to bug #1042, but does
155 not fix it. The fix is not to compile with FORTIFY_SOURCE.
156 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
157 the trunk SVN. I don't think this was reported as a bug.
159 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
161 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
163 kes Add DataDespooling and DataCommitting status (committing is
164 the last despooling).
165 kes Finish implementation of new reservations code noted below.
167 kes Fix bsnprintf for float point numbers. I broke recently when
168 parameterizing some variables. This fixes bug #1036.
169 kes Undo recent reservations changes ... will apply them later
170 when they work better.
172 ebl Fixes #1034 which cause mysql to hang the connection after 8h
173 ebl Change default statistics target of filename.name and path.path
174 fields for PostgreSQL. This speeds lookup by indexes. Thanks
176 kes A few more tweaks to new reservation code. Make sure to clear
177 vol released flag when retaking volume. When reading label and
178 label is bad mark volume unused. When recycling, mark volume
179 unused so it can be renamed.
181 kes Fix reserve_volume() so it doesn't release a volume in use
182 (i.e. a volume entry not marked released). This should be
183 the last part needed to fix bug #1018.
185 kes Move Heartbeat documentation from Job to Director resource.
186 This fixes bug #1033.
188 kes Fix existing switch drive SD code to call autochanger to release
189 any old volume. This must be done to keep the autochanger from
190 releasing subsequently newly reserved volumes in doing a close().
191 This should fix bug #1018.
192 kes Fail if attempting to get console input in batch mode. This
193 should help fail RunScript console commands that are incomplete.
194 kes First cut implementing switch_drive() in SD (not actually called).
196 kes Implement first cut running console commands in a RunScript.
198 ebl Fixes bug #1028 where 'Selection Type' option was not usable
200 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
203 Release Version 2.2.7
205 kes Add new free_tls() entry point so that Win32 builds.
206 kes Fix compile warning in src/lib/util.c
207 kes Fix entry point for edit_job_codes() so that Win32 builds.
208 kes Fix seg fault Frank Sweetser reports in regression testing
209 on his systems. The problem was that the original author of
210 bsnprintf.c did not take into account the side effects of
211 using ++x in the argument to a #define.
212 kes Make SD protocol backward compatible with version 2.2.x.
214 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
215 because Bacula no longer restores sockets.
216 ebl Always use ignorecase fileset option on win32 FD.
218 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
219 that implements double quoting include names in conf files,
220 and also allows piping input by having the first character
221 be a vertical bar (|).
222 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
223 that implement %f in RunScripts to pass the FileSet name.
224 kes Skip leading | when lex input comes from a pipe as suggested
225 by Michael Stapelberg <michael@stapelberg.de>.
227 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
228 Nerijus Baliunas <nerijus@users.sourceforge.net>
230 kes Implement Plugin Directory and plugin events.
232 kes Implement a security enhancement: TLS authentication but no
233 encryption. Enabled by setting 'TLS Authentication = yes'.
234 Note when this is on, TLS encryption is turned OFF!
236 kes This patch corrects a problem where the maximum concurrent storage
237 jobs counter gets out of sync during restore jobs causing jobs to
238 'wait on max Storage jobs'. This patch fixes bug #1009.
240 kes This patch fixes bcopy so that it produces correct Volumes.
242 kes This patch eliminates spurious output to the console during a VerifyVolume
243 job that contains encrypted data. It fixes bug #1024.
245 kes This patch prevents the 'status dir' command from trying to use a scratch
246 volume and possibly moving it from one pool to another. This patch fixes
249 kes Add new include to postgresql.c suggested by Marc Cousins so
250 that it compiles correctly with pgre version 8.3.
252 kes Fix --archivedir addition to configure. Replace it with
253 --with-archivedir in configure.in This fixes the regression
255 kes This patch fixes bug #1012 where the job is canceled because
256 of Max Run Time exceeded when the job has not yet started.
258 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
259 one 'part' to write. Instead of each part being stored on disk,
260 written to DVD, then deleted from disk, all parts are written to disk,
261 and only the last is written and deleted from disk.
262 kes This patch fixes the status command to include the formating string for
263 JS_AttrInsterting. It fixes bug #1021.
264 kes This patch should fix the Mac OS X build problem on the latest
265 Darwin, where sys/types.h was not included correctly (apparently
266 due to a change in the Mac headers). The solution was to explicitly
267 ensure that it is defined for the ./configure.
268 This patch also has a rebuild of configure that includes the Debian
269 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
270 kes This patch should ensure that queued messages to the console are
271 displayed as soon as possible. It should fix bug 1007, but has been
272 reported not to work.
274 kes This patch fixes the infinite loop when trying to increase the
275 maximum number of volumes in a Pool during the add command.
276 This patch fixes bug #1008.
278 Release Version 2.2.6
280 db Remove extra data on estimate command in joblist for bat.
282 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
283 really change anything, but is the beginning of doing it *right*.
284 To do it completely right the LastWritten date must be passed to
285 the SD, but it is not yet done.
286 kes Minor tweaks to some bat restore SQL.
287 kes This patch fixes bug #1003 where putting the message output from
288 a Verify job into the catalog results in a recursive loop. The problem
289 seems to show up only with postgresql (to be verified).
290 kes Correct %x to %p in postgresql debug statement.
292 kes Fix bug #942 where lots of emails where generated when the heartbeat
293 interval was low and Bacula wanted a different tape from the one in
296 ebl Add new SD despooling attributes and Dir inserting attributes
297 job status codes in the catalog (Status table).
299 ebl Use qmake-qt4 instead of qmake when available (debian system).
301 kes Add a security warning to src/cats/make_catalog_backup.in indicating
302 that passing the password via the command line (arg 3) is insecure.
303 This responds to bug #990 (it doesn't fix it).
305 kes Set default debug_level to zero. This corrects bugs #991 and #993.
306 kes Fix a crash in bat when it cannot connect to the Director for example
307 if the Director is not running.
308 kes Remove redundant INDEX (JobId) from File table in the trunk.
310 kes Make explicit exception to GPL in LICENSE to permit linking
311 the Win32 FD with Microsoft VSS code.
312 kes Apply the Solaris package patch from
313 Masopust, Christian <christian.masopust@siemens.com>
314 kes Apply the patch to optionally add a timestamp in the debug output
315 submitted by Mariusz Czulada <manieq@wp.eu>.
317 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
318 backend (sql_strerror). Fixes bug #989
320 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
321 It applied with no problems.
322 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
324 kes Redirect stderror to stdin on mt status command in mtx-changer.in
325 since the status is returned on stderr on Solaris.
326 kes Activate Close button on tray-monitor window. This fixes
328 kes Check for NULL item in parse_conf.c before calling it. In the
329 case of Device, there is no item and this caused a seg fault when
330 Device appears in the conf file.
331 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
332 avoids pulling in config.h multiple times in some new code.
334 kes Fix spurious warning message printed when creating a volume with
335 a LabelFormat. This fixes bug #976.
337 Release Version 2.2.5
339 kes Add JobId in place of Job name in all the Jmsg() output.
340 kes Correct the APP_DESC for the Win32 storage service (remove an e).
342 kes Make maxvol-test and new more strict maxvol2-test work.
343 kes Print JobId in all Jmsg() job output.
345 kes Add new SD despooling attributes and Dir inserting attributes
346 job status codes. This fixes bug 961.
347 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
349 kes Fix doc issue. This fixes bug #963.
350 kes Fix listing performance problems in bat. Pointed out by
352 kes Remove old debug code.
353 kes Fix bat code that tests for Win32. This should fix bug #968
354 kes Query 5 list wrong Vol after migration. This fixes bug #960
356 ebl Fix #969 where user can't change Replace option in restore menu.
358 kes Save jcr in thread specific data (tsd) for each thread.
359 kes Make Dmsg() print JobId as -%u.
360 kes Make Jmsg, Emsg, and others automatically pickup the jobid
361 for the thread if it exists.
362 kes Remove old reservation debug jid code.
363 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
364 ebl Add an option that permit to specify spool size in job
365 definition. (Applying patches/testing/spoolsize_per_job.patch).
366 You must upgrade SD and DIR at the same time.
367 dvl Add new configuration item --archivedir
368 dvl Adjust regression tests to use tmp not /tmp. This will allow
369 multiple concurrent runs of the regression tests.
371 kes Fix race condition that drops final block written to volume.
372 This happens in rare cases with multiple simultaneous jobs
373 when the Volume fills. This fixes bug #964. May be related
374 to bug #935 and possibly #903.
375 kes Eliminate more strerror() and replace with bstrerror().
376 kes Remove BSD getopt and replace with unrestricted IBM version.
377 kes Fix Win32 build for changed calling sequences.
378 kes More tweaks to the mount volume routines to get everything
379 right. Changed variable name from find to have_vol, which is
380 much easier to understand.
381 kes Enhance btimer debug code.
383 kes Fix FD->SD authorization failure, which was due to spurious
384 wakeups from a pthread_cond_timedwait(). Simply check the
385 predicate before continuing. This fixes bug #953.
386 kes Add const char where needed (more to do). Remove temp debug code.
388 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
389 kes Don't overwrite error message in check_tables_version.
391 kes Unlock batch insert tables with same calls used elsewhere.
392 kes Allow starting 59 jobs a second.
393 kes Make SD session key more random.
394 kes Add retry for SQLite opening db if it fails. Probably helps
396 kes Suppress extra error messages during batch insert failure.
398 kes Add jcr to timer packets so if killed message can be sent to job.
399 kes Add JobId to all Dmsg() output.
400 kes Put some FD auth code on dbglvl rather than fixed.
401 kes Return insert attributes error message in db msg buffer to avoid
402 false error messages. Helps fix bug #966.
403 kes Separate batch init error messages. Probably helps fix bug #966.
404 kes Make SD code that contructs attribute insert check string lengths
406 kes If Dir gets an error during inserting attributes, cancel SD.
407 This reduces unnecessary error messages.
409 kes Correct search boolean for getting Volume info
410 ebl Cleanup batch insert code. Probably fixes bug #965.
411 kes Back out one small change to the reservation system (reserving a volume).
412 kes Rework how a Volume is mounted. It is now much more intelligent and
413 will always attempt to use any mounted volume if possible and reduces
414 calls to the Director asking about volumes.
416 kes Turn off some code when batch insert not enabled.
417 kes Edit FD name in connect error messages.
418 kes Rework the reservation system to take into account that the Director
419 might give us a Volume that is different from the current one being
420 used, and to ensure that we don't exceed Maximum Volume Jobs.
421 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
422 fatal error with multiple jobs running'
423 kes Add more debug code in reservation system.
424 kes Implement maxvol-test to check bug #947.
426 kes Add code to handle tray monitor separated from Win32 FD.
427 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
429 kes Add missed return in fixing verify bug -- trunk only.
430 ebl Fix a command parser issue causing a director segfault.
431 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
433 kes Increase the max block size to 4MB fixes bug #957.
434 kes ERABT if user sets min block size > max block size. Fixes bug #956.
435 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
436 is not properly mounted (recognized) during a poll.
437 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
438 Job that has differences reports Verify OK.
439 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
441 ebl Add an option to operate on all pools with update vol parameters.
442 This complete the project 20. Patch from Nigel Stepp.
443 ebl Add history support to bconsole when using readline.
444 Using Ctrl-D to exit doesn't update .bconsole_history
445 kes Modify new volume algorithm to use max MediaId for generating next
446 volume number rather than the count of Volumes. This should essentially
447 eliminate the failure rate if some volumes were deleted. Bug #921.
448 kes Begin implemention of Optimize Job Scheduling.
449 kes Implement restore callback that Dirk and I agreed on for bat
450 restore. This fixes bug #928. Restore of backup of zero files fails.
451 kes Fix SQL Catalog logging which broke with new db_escape_string
454 Release Version 2.2.4
456 kes Fix bacula_cats.def for new db_escape_string().
457 kes Increase size of name string when FD making connection to SD.
458 May fix bug #953. FD->SD connection failure.
460 kes Add code to help Dan debug 2drive-incremental-2disk test.
461 kes Add code to try to fix bug #908.
462 kes Add waits to multiple exit detection code to try to force pid
463 file to always be deleted.
464 kes Restore good dev.tar.gz to rescue set appropriate binary property.
466 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
467 trying to switch drives by checking for blocking before unblocking.
469 kes Cancel storage daemon in all cases where FD reports error. This
470 should fix virtually all cases of bug #920.
471 kes Fix db_escape_string() for MySQL which did not compile.
473 kes Fix error message that was clobbered when Dir tells SD it does not
474 have write permission on Volume. This should fix a minor point
475 in bug #942, but not the main problem.
476 kes Add code to cancel job in SD if FD connection fails. This should
478 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
479 dvl Pass jcr and db into db_escape_string() to enable better escaping
481 kes Fix migration code to get correct Volume name with multiple volumes
482 by skipping |. Fixes bug #936.
483 kes Implement patch supplied by Landon to fix bug #944 where using
484 TLS with bconsole uses 99+% of the CPU.
485 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
487 kes Move patches into patches directory.
489 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
492 ebl Using 'm' in bconsole will show messages like before,
493 and not memory usage.
494 kes Fix bug #935, and probably also bug #903 where files were not
495 restored. MediaId was not properly set in JobMedia record after
498 kes Suppress chown and chmod error messages if the FD is not running
501 kes Apply Martin Simmons' patch that should turn off the new API usage
502 when batch insert is turned off allowing building on older
504 kes Add ./configure search in qwt-qt4 for qwt package
506 kes Bacula is now free of 3rd party GPL copyrighted code!
508 kes Add guid_to_name.c/h which replace idcache.
509 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
511 ebl Detect if new PosgreSQL batch insert API is present.
512 kes Correct incorrect mempool call causing Director crash. Occurs on
513 systems without va_copy().
514 sb Update spec files for 2.2.1 release
516 kes Fix memory pool call in ua_output.c. bug #934.
517 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
518 Add test program to fnmatch.c
520 kes Integrate patch to README.vc8 from
521 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
522 edit it to get it into Unix patch format.
523 kes Implement mkpath.c to replace old FSF makepath.c
525 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
527 Release Version 2.2.1
529 kes Update POTFILES.in
530 kes Cleanup a few underquoted AC_DEFUNs in configure
531 kes Apply patch from Martin Simmons that adds a test for va_copy to
534 kes Fix bug #921 by increasing the number of tries to create a new volume
536 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
537 can be called multiple times. Implement a version for machines
538 without va_copy() that gets a big buffer.
540 kes Integrate more portable zone offset code into bsmtp.c
541 Submitted by Attila Fülöp.
543 kes Fix bad SD->FD return status reported by
544 (James Harper) <james.harper@bendigoit.com.au>
545 ebl Fix a bug in read_close_session which return random status
546 thanks to James Harper
548 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
549 and directory names during restore of single file/directories.
550 kes Add sanity checks to .sql command when string is empty. Hopefully
551 that will resolve Dirks Director crash.
553 kes Apply patch submitted by Martin Simmons that corrects a seg fault
554 in the bsmtp chat subroutine when debug is >= 10.
556 kes Fix Director crash when running bat SQL queries.
557 kes Add David's notes on Item 8: Copy pools.
559 kes Rework projects file to be current and ready for a vote.
560 kes Enhance lex scanner error message.
562 kes Tweak LICENSE file to mention BSD code.
563 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
564 if specified on the ./configure.
565 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
566 This class is intended to allow us to open a second bsock to the
567 Director while in the restore subdialog.
569 kes Fix configure to create bat Makefile before creating dependencies.
570 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
571 kes Add a tooltip to the tray monitor.
572 dvl Set the Director's PID file before dropping privs. This fixes
575 kes Update AUTHORs file
576 kes Increase the default max concurrent jobs to 20 in FD and SD to
577 correspond with the default .conf files.
578 kes Rewrite the Win32 service routines. This eliminates the 3 copies
579 some different, of the same file created by RN when porting the
581 kes Rearrange some of the Win32 directories and the placement of the files
583 kes Set DEVELOPER flag in version.h
585 ========================================================================
586 Release Version 2.2.0
588 kes Apply a second doc patch from Marc.
589 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
590 improves the tips section that discusses how to setup multiple
593 kes Update bat README file.
594 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
595 corrects a typo in the Recycle status check in db_find_next_volume().
596 This will probably fix a number of annoying problems with multiple
598 kes Modify most of dird/msgchan.c to use bsock class calls rather than
599 bnet calls -- no functionality change.
601 kes Modify the Verify output to specify if files are missing on
602 the Volume(s) or disk. Fixes confusion in bug #916.
603 kes When more than one Volume is read in a migration job, the last
604 Volume bytes reported are from the last read volume rather than
605 the last written volume. Fixed. This fixes bug #910.
606 kes Fix display of Recycle flag after update volume=foo recycle=yes.
607 It previously printed New Recyle flag is: no. This fixes bug
610 kes Correct seg fault when switching tape drives during restore.
611 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
612 be used until after 2.2.0 release.
614 kes Remove fnmatch() in SD that permitted wild card specifications.
617 kes Fix %g in filename returned by SQL for browse tree reported by
619 kes Fix configure so that it puts config.out in the cwd rather than
621 kes Attempt to fix the locking problem reported by Eric in bug #906.
622 kes Make berrno class to leave errno unchanged after constructor call.
623 kes Make bnet_server use the heap rather than the stack to allocate
624 its socket fd pointers to avoid a crash at termination. Problem
625 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
627 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
628 and putting it in depkgs-qt along with Qt4.3.
630 kes Rework code in acquire.c that switches drives for reading when
631 the Media Type does not match. This should fix bug #906
633 ebl Fix a director segfault during job setup #907
634 kes Correct seg fault in postgresql when first operation returns no
635 rows. Fixes Dirks File browser problem seg fault with bat.
637 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
638 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
641 kes Implement PopUp YES/NO dialog for bat.
643 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
645 kes Correct RunScript to terminate job in FD on failure.
646 kes Change abort_on_error and AbortJobOnError to fail_on_error
647 and FailJobOnError in RunScripts.
648 kes Minor tweaks of code formating in RunScripts, principally to
649 avoid depassing 80 columns.
651 kes Eliminate one #ifdef Win32 in bsmtp
652 kes Implement grow tool to grow a file for testing very large databases.
653 kes Add big-vol-test to test Bacula seeking with > 5GB.
656 kes Modify find_next_volume() to return all values in Media record.
657 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
661 kes Update Release notes
663 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
664 Warning, in previous beta version, all media get from scratch keep their
667 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
668 This should fix bug #842. Made a note to look at removing the temp
669 files at the end of the install.
670 kes Add ability to mount and unmount a file device providing it is
671 marked as being removable and has the appropriate mount and unmount
672 commands defined in the Device resource. This fixes bug #830.
673 kes When applying a storage override, release all previous storage
674 definitions rather than just prepending the new storage.
675 This should prevent a good deal of confusion.
677 kes Implement ./configure search for qwt libraries.
679 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
680 Win32 FD. This should fix bug #893.
681 kes Remove an unnecessary beep in Win32 init code.
682 kes Update copyright dates in Win32 executable about boxes.
683 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
684 code with a BSD getopt.c and getopt.h.
685 kes Remove sched.h from the Win32 compat directory -- not used.
686 kes Remove the Exit menu item from the Win32 tray monitor. If you really
687 need to shut it down, do it through the services panel or the command
689 kes Remove some inappropriate Bacula FSFE copyrights.
690 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
691 kes Fix regress config non-portable test as pointed out by
692 Florian Heigl <florian.heigl@gmail.com>
693 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
694 as pointed out by Florian Heigl <florian.heigl@gmail.com>
696 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
697 Reported by Frank Sweetser.
701 kes Fix client-only build.
702 kes Integrate client-only fixes for bsys (initgroups) and conio from
703 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
704 kes Make arguments to get_scratch_volume() in same order as other
706 kes Rework the prune_volumes() subroutine so that after purging and
707 no volume found in desired pool, it will check for a scratch
708 volume. This prevents recycling the whole scratch pool.
709 kes Add code to status storage to print boffset_t (largefile support).
711 kes Move qwt (Graphics libarary for Qt4) to depkgs.
712 kes You now need a --with-qwt=<dir> to be able to build bat.
713 kes Update src/win32/cats/bacula_cats.def to include the new
714 db_get_query_dbids() call on Win32.
716 kes Correct a problem when selecting a scratch volume and moving
717 it to another pool that lost some columns.
718 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
719 kes Enhance Autochanger error messages to include Volume and device name.
720 kes Rework prune_volumes() code to take account of InChanger flag,
721 and to handle recycling volumes going to the Scratch pool and
722 current pool because the RecyclePool directive.
723 kes Implement a better and more efficient db_get_query_dbids() to
724 handle creating and passing back a list of DBIds.
728 kes Start work on new more efficient DBId subroutine. First use
729 will be for recycling volume to Scratch inchanger.
730 kes Increase number of JobIds in pruning from 1000 to 10000.
731 This to be replaced by above routine.
732 kes Begin implementation of building Qt4 on Win32.
733 kes Correct typo in fix I added for bad TLS shutdown.
734 kes Pull 2.0.3 patches into patches directory.
735 kes Update Release notes. Include qt-console in line count.
736 kes Update Projects file.
738 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
739 bug in migration code where a job that spanned two volumes
742 kes Implement new BST_DESPOOLING blocked state. Change from locking
743 during despooling in SD to blocking. This means that other threads
744 can work with the device structure, in particular the reservations
745 system while despooling.
747 kes Fix return in reservation message queue that missed clearing
748 the jcr lock (implemented 26Jun07 below).
749 kes Rename a number of dev methods to make locking function names
751 kes Document locking in lock.c. Move lock structures to new file
754 kes Move reservations message lock to lock jcr only this
756 kes Move main SD locking code into lock.c (new file).
757 kes Update Win32 build to include lock.c
761 kes Dirk committed the qwt library code for drawing graphs in bat.
762 kes Tweak install of qwt so that it is integrated with ./configure.
764 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
765 out by Eric (my typo).
766 ebl Fix configure.in to get batch mode enable
767 kes Return correct string from authenticate.cpp in bat when connecting
769 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
770 spurious line drops when using TLS.
771 kes Do not file reparse points when restoring a file that already
774 kes Implement Windows reparse points -- similar to directories, but
775 we do not descend into it. This is a first cut. They seem to
776 be backed up, but restore is not yet tested.
777 kes Remove restore_blocking in tls code when shutting a socket to leave
778 it in blocking mode. Hopefully this will fix the encryption bug
779 reported by Frank Sweetser.
780 kes When opening a file for backup, tell the OS that we are going to
781 read it sequentially -- optimization.
782 kes Change variable names in authenticate_director() to not conflict
783 with member names in bat. Caused great confusion with compiler,
786 kes Queue openssl error messages in case of comm problem.
787 kes Do shutdown() call if socket terminated.
788 kes Remove some duplicated code in tls.c
789 kes Move more of the bsock member variables into private and access
791 kes Add Frank Sweetser's tls-test to the regression suite.
793 kes Add Swedish sv.po file
795 kes Don't print clock skew message in FD if less than 3 seconds diff.
796 kes Add a bit of VSS info to status client.
797 kes Implement a first cut of Vista VSS, using Win2003 code.
801 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
802 loaded tape but uses first drive).
803 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
804 This was indeed a Win32 issue.
806 kes Simplify search of autochanger for in-use Volume.
807 kes Fix exit condition of check for in-use volume. kes Remove
808 inappropriate my_postgresql_free_result() in db_close()
810 kes Fix bad return in FD when encryption signature not found.
811 Probably caused a crash.
812 kes Inhibit missing encryption signature error messages for
813 file types where no signature computed.
814 kes Correct inverted check on autochanger in reservation system.
815 kes Tweak debug code in autochanger reservation.
817 kes Add some additional locking in the cats directory in subroutines
818 that modify packet variables called from batch insert.
819 kes Rework how dcrs are allocated. new_dcr() can now be called
820 with an existing pointer, and it will simply clean it up.
821 This allows the reservation system to test various different
822 devices, and will permit easy device changes.
823 kes A bunch of changes all over to handle new new_dcr() calling
825 kes Work more on the Volume management in the SD. Remember Volumes
826 for tape drives and for autochangers (even virtual disk changers).
827 kes When looking at the Volume list to reserve a drive, handle
828 autochanger names correctly by interating through the changer
829 devices. Also call the Director to see if a Volume is suitable
831 kes Fix some bugs in bscan. Make sure all media records are written.
832 Make sure that valid JobMedia records are written for disk files.
833 Previously they were completely wrong.
834 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
835 that the URLs don't change and so that the developers will all
836 work off the same copy. Rebuild from scrach.
837 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
841 kes Fix seg fault in FD from incorrect digest size.
842 kes Fix argument to non-OpenSSL crypto.c subroutine.
846 kes Remove a few malloc()s from the encryption code.
847 kes Use the class calls to bsock in filed/backup.c and restore.c in
848 place of the old bnet_xxx code.
849 kes Implement code that does an on the fly calculation of the
850 signing digest during restore of encrypted files. It makes
851 a best guess at the algorithm, and if it is not correct, will
852 then revert to the old code which reads the file after it is
854 kes Implement at least one missing crypto stream in stream_to_ascii()
855 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
856 #877 where a reload with bad syntax causes Dir to exit.
858 Cut: 2.1.14 beta (not released)
860 kes Do not free a volume on a tape drive until another volume is
861 mounted and read, or the autochanger unloads the volume.
862 This should help the SD re-use volumes that are already mounted,
863 and should fix bug #886.
864 kes Apply patch from user brettedgar that allows gnome2-console include
865 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
866 kes Apply patch from Lucien Weller that fixes day of week calculation
867 because of DST flag problem. Fixes bug #887.
869 kes Move find_next_appendable_volume() to after acquiring a valid device
870 in reserve.c. This fixes bug #864 -- confirmed by reporter.
872 kes Unable to reproduce bug 872. However added additional testing for
874 kes Bug #874 resolved by documenting SQLite limitations.
875 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
876 kes Bug #881 resolved by removing typo in mtx-changer script.
877 kes Made Frank Sweetser's wiki the official Bacula wiki with his
878 approval. Added a link to the wiki on the web page, and implemented
879 a backup from http://paramount.ind.wpi.edu
881 kes Fix update allfrompool to pass pool name.
883 kes Convert to pure GPL v2 license.
884 kes Fix sscanf problems reported by Peter Buschman that caused
885 a bus error on Solaris.
886 kes Rework (simplify) the select prompt in bat.
887 kes Move get_jobid_from_tid() into lib and create a
889 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
890 should definitely fix the problem of lost error messages in the
892 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
893 kes Eliminate tcpd.h from the project. Enclose the #include from the
894 library with extern C ...
895 kes Add print of signal name when a signal is trapped.
899 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
901 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
902 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
903 makes SQLit3 run 30 times faster, though a bit less safe.
904 kes Implement --with-batch-insert in configure and detection of thread
905 safe libraries. It is on by default, but turned off if no thread
906 safe library (e.g. SQLite 2) is available.
908 kes Fix Bacula PostgreSQL buffer overruns.
909 kes Do better checking for NULL results returned from PostgreSQL;
910 implement retry for failed queries; clear results buffer after
911 failed query. Hopefully this will correct the PostgreSQL failures.
913 kes Implement algorithm to handle only one appendable volume with
914 Prefer Mounted Volumes = no.
915 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
916 returned from a query.
917 kes Make volume lock recursive.
918 kes Implement an additional volume reservation algorithm that
919 starts by considering all reserved volumes then uses the
920 old brute force algorithm of searching the resources to
921 find a suitable device.
922 kes Add new reservations debug code and refine the old code.
923 kes Update the win32/dll/bacula.defs file.
925 kes Tweak reservations algorithm to permit a few more cases, i.e.
926 volume reserved, but on different drive, ...
927 kes Enhance SD status to include Pool and Media Type for drive in a
928 more readable format (a bit longer).
929 kes Fix PostgreSQL double free.
931 kes Minor refactoring of restore decryption code.
932 kes Add code to smartall.c to detect double free of a buffer.
934 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
935 so that bsmtp will create a correct email address (mailbox only).
936 kes Modify 'memory' command so that the buffers are listed as 'In use'
937 to avoid confusion with Orphaned buffers.
938 kes I reworked the OpenSSL include/lib flags to be handled in
939 the standard Bacula way, which should fix bug #863 concerning
940 non-standard OpenSSL libraries.
942 kes Implement Help Browser window for bat.
943 kes Fix reload bug that reset StorageId to zero.
945 kes Fix TLS #ifdefing when TLS turned off.
946 kes Ensure that when labelling a tape with Slot=0 that InChanger
948 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
950 kes Add StartTime to final uar_sel_jobid_temp query so that we can
951 add DISTINCT (required by PostgreSQL).
952 kes Implement BSOCK authenticate_director() method. Eventually will
953 authenicate all daemons.
954 kes Move several more functions into the BSOCK class.
956 kes Add code to tell the OS that we no longer need a cached
957 file that we were reading. In findlib/bfile.c. Also,
958 only cache files that we are reading. Thanks to
959 Tobias Oetiker <tobi@oetiker.ch> for the idea.
960 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
961 kes Implement script to automatically generate cats and dll .def
963 kes Update README.mingw32 to include new .def file generation.
964 kes Correct typo in UTF-8 error message as reported by:
965 jhernandez <julianhernandez@gmail.com>
966 kes Add additional sm_check() code on debug level 1.
967 kes Set default debug level to 1.
968 kes Trap SIGABRT in attempt to get traceback.
970 kes Reduce bat connect timeout from 30 to 15 seconds.
971 kes More restructuring and implementing BSOCK class in place of
973 kes Remove a few unnecessary malloc() tests in crypto code.
974 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
975 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
976 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
978 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
980 kes Fix Verify InitCatalog. The attributes were not pointing to the
981 correct saved location.
982 kes Implement message callback so that GUI is sure to get all
983 daemon messages. Currently displayed in a dialog in bat.
984 kes Ignore SIGUSR2 (Bacula timer) in bat.
985 kes Apply regress patch from bug #859 to allow regress to work
986 with Solaris compiler.
988 kes Begin adding TLS support to bat.
989 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
990 clean up lex.c and make it more readable.
992 kes Move more bnet functions into the BSOCK class.
993 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
994 kes Complete change of berrno strerror() method to bstrerror()
998 kes Cleanup incorrect email addresses in bsmtp.
999 kes Make bat display initial messages rather than discard them.
1001 kes First cut of adding .mod to the run command.
1002 kes Implement auto display of messages in bat.
1003 kes Enhanced preferences to allow all Bacula output to be
1006 kes Try to make bsmtp date routines more generic.
1007 kes Fixed bug #856 autochanger documentation.
1008 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1009 kes Add new cats entry point so Win32 builds.
1011 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1013 kes Do better checking for the MySQL 64 bit libraries looking for both
1014 .a and .so libraries.
1015 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1016 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1017 kes Require the thread safe version of MySQL during configure. Thanks
1018 to Andre Noll for pointing this out.
1019 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1020 continuing in migration code.
1021 kes Apply implementation of tray-monitor font derived from gnome-console
1022 submitted by Andreas Piesk <a.piesk@gmx.net>
1024 kes Eliminate important memory loss in SQLite
1025 kes Fixed the batch insert MySQL thread specific data that was not
1026 being freed. See cats/mysql.c:db_thread_cleanup().
1027 kes Fix restore before command.
1028 kes Convert old hdr.name to name() in a few places.
1029 kes Implement update jobid command.
1030 kes Return all time_t dates in db_get_job_record()
1031 kes Stop watchdog in SD earlier.
1032 kes Put Pool just after Storage in please mount message.
1033 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1036 kes Update the po files.
1037 kes Fix Verify InitCatalog by making it cache attributes.
1039 kes Change name bacula-bat to bat for man 1 page to correspond to
1041 kes Check for client and store NULL pointers in status command. This
1043 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1044 kes Fix sign extended editing of %p.
1045 kes Clean out a little old #ifdefing in cats/mysql.c
1047 kes If time diff between DIR and FD is more than 600 seconds convert
1048 INFO message to WARNING.
1049 kes Implement heap size display in status for all daemons.
1050 kes Attempt to fix MySQL db open memory loss (not successfull).
1051 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1052 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1053 Query. This looks like a MySQL but but by doing extra releases,
1054 the memory goes away. This should fix bug #847.
1056 kes When backup fails, cancel SD before waiting for sd termination.
1057 kes If SD is waiting for FD to connect during cancel, wake up the
1059 kes Fix fsf code so that errno is correctly reported.
1060 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1062 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1063 so that Bacula doesn't later stumble into a seg fault.
1064 kes Use the term Restore Client in the restore Job report.
1065 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1066 the original job's FileSetId.
1067 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1068 spooling in migration jobs. Not yet tested.
1069 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1070 reading conf file from a pipe. However, do it with open_bpipe()
1071 rather than popen. Not yet tested.
1073 kes Fix an ugly bug where the VolCatBytes were getting updated
1075 kes Implement bconsole memory command that prints current memory
1076 usage, plus smartalloc dump.
1077 kes Clarify some error messages in backup, admin, and migrate.
1078 kes Shrink label dialog to smaller size.
1079 kes Invert Cancel OK buttons on restore to be OK Cancel.
1080 kes More strerror() to bstrerror() conversions.
1082 kes Start implementing bstrerror() in place of strerror().
1083 kes Stripping path -- seems to work.
1085 kes Prevent door and port files from being restored (mostly
1087 kes Free an unreleased buffer in compat code.
1088 kes Change console Job name from *Console* to -Console- to eliminate
1089 Win32 filename problems. Put Win32 path separator when creating
1090 Console file. This fixes bug #846.
1091 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1093 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1095 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1096 to force Win32 error message.
1098 kes First cut strip path. The data should be passed to the FD,
1099 but nothing is done with it yet.
1100 kes Enhance the digest and signature routines in the crypto
1101 library to accept a JCR and to use it to print error messages
1102 so that they will go in the Job report rather than the daemon's
1104 kes Simplify some of the verify signature code.
1105 kes Simplify a few of the alternative returns in the signature
1108 ebl Use only POSIX regex instead of GNU regex in breg.c for
1109 File relocation. It fix broken freebsd compilation.
1110 kes Convert all other Dir files to use new ua class message
1112 kes Tentative fix for missing digest signature in bug 807.
1113 kes Correct handle problem in new win32_ftruncate routine.
1114 kes Convert ua_purge.c and ua_update.c to use new ua class
1115 message routines for bat.
1117 kes Correct incorrect installation of LICENSE in Win32 installer.
1118 kes Display LICENSE at the beginning of the Win32 install.
1119 kes Attempt to correct the need for the png files to be installed
1121 kes Reapply my bat.conf install script in qt-console. I think I
1122 editted bat.pro instead of bat.pro.in and it was lost.
1123 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1124 the /var/lock/subsys for subsysdir. Also corrects typos in the
1127 kes First cut update job.
1128 kes Correct configure to include qmake of src/qt-console directory.
1130 kes Make restore job yes/mod/no print in one command so GUI works.
1131 kes First cut implementing backup and restore client.
1132 kes Correct editing in Verify output that caused a seg fault.
1134 kes Insure that bat.conf is not overwritten during installation.
1135 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1136 while I was implementing migration in March 2006 !
1138 ebl Cleanup file relocation, using char *RegexWhere instead of
1139 char *where + bool where_use_regexp
1140 kes Update some manpages and add bat manpage.
1141 kes Make a first cut at converting bacula.spec.in for bwx-console
1143 kes Apply patch from John Goerzen to add hostname as fourth argument
1144 to make_catalog_backup script.
1145 kes Fix typos I introduced into bsmtp.c
1146 kes Make pm_strxxx() routines handle input of NULL pointer. This
1147 is to protect from NULL pointers returned from SQL databases.
1148 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1149 kes Add more debug to FIFO code -- fix fifo regression test.
1151 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1152 kes Add thread timer to bnet_connect() to break from OS if wait time
1155 kes Update Win32 build to include new files, new symbols, and
1157 kes Implement socket level heartbeat (tcp_keepidle)
1158 ebl Commit File relocation patch
1159 kes Make bat have 'make install' target.
1160 kes Warn during install if old gnome-console binary found.
1161 kes Warn during install if old wx-console binary found.
1162 kes Add -8 option to bsmtp command line to add content type utf-8.
1163 Fixes bug #809. (Character coding problem in bsmtp).
1164 kes If < is found in target (from, to, cc) then do not enclose the
1165 target in < > in bsmtp. Fixes bug #772 (malformed address).
1166 kes When printing certain items in dbcheck, stop after 300000.
1167 Fixes bug #822. (dbcheck loops).
1168 kes Incorrect status in Dir after waiting for mount with poll set.
1171 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1173 kes Print waiting to reserve a device every 5 mins.
1175 kes Don't call close_part in label.c if tape and relabel.
1176 kes Don't free volume if busy in close() -- should help with
1178 ebl Fix #824 RunScript bug (After script could be execute twice)
1179 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1180 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1181 Add a regression script to test RunScript
1183 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1186 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1187 deprecated. No additional bugs will be fixed, and they will be dropped
1188 in a future release (probably 2.4.0).
1189 kes Change name of wx-console to bwx-console to make it more Bacula
1191 kes Change the name of gnome-console to bgnome-console to make it
1194 kes Some time in March, a Feature Request with patch from Jorj Bauer
1195 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1197 The ability for the director to validate a Client (FD) CN against
1198 an arbitrary set of patterns rather than the hostname, with
1199 A new 'TLS Allowed CN' set of directives which are implemented
1200 in the Client resource. Then pattern matching is used in place
1201 of hostname matching against the Certificate's CN. As an example, we
1202 have certificates which (a) use a local CA, and (b) have a CN of the
1204 kes Add new/changed entry points to Win32 build
1205 kes Create unaccepted-projects for projects that are not accepted.
1206 kes Simplify locking in the reservations system.
1207 kes Add more debug code in reservations.
1208 kes Make sure error condition on reserving a volume is handled correctly.
1209 kes Correct handling of volume_in_use.
1210 kes Correct handling of initializing a device.
1211 kes Move handling of broadcasting releasing a device into release_device().
1212 kes Correct attaching dcr to dev so that it is only done if device
1213 is properly initiated.
1215 kes Locking debug level tweaks in SD.
1216 kes Tweak new Volume code.
1218 kes Add exec external-command [wait-seconds] to bconsole. This
1219 executes the external-command. Note! normally external-command
1220 should be enclosed in double quotes.
1221 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1222 it should normally be off in a production system.
1224 kes Implement die command for SD so that we can force it to dump.
1225 kes Implement SD lock debug code.
1226 kes Implement new algorithm for keeping Volume list in SD. It
1227 is now owned by the device.
1229 kes Implement new code for freeing in use volumes that should
1230 resolve if not all, some of the problems of multiple drive
1231 tape conflicts described in bug 801.
1233 kes Fix gui/bacula-web/images files in svn.
1234 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1236 ebl Fix a bug in batch mode (in string escape)
1237 kes Correct migration prune SQL typo that crept in in a
1238 recent 2.1.x change.
1240 kes Move bnet_despool() into class in bsock.c
1241 kes Modify job report to include director name and Build OS.
1242 kes Move drop root privilege and check_catalog() before fork.
1243 kes Add update database scripts (version 9 to 10) to updatedb directory.
1245 ebl Check size and age of each file after its backup to see if
1246 it has changed during backup, if 'checkfilechanges' is set.
1247 The FD will do an extra check (stat(2)) after
1248 each file backup. mtime, ctime and size are compared with
1249 'before backup' information. If time or size mismatch, an
1250 error message will be generated. You must upgrade FD to use it.
1252 kes Make database name and user configurable
1253 --with-db-name=xxx --with-db-user=xxx
1254 kes Add back database type to message.c for debugging.
1256 kes Implement dir_sql() which issues an SQL query.
1257 kes Modify bat medialist to use dir_sql() and do some minor C++
1258 formatting as well as eliminating a number of pointers, simplifing
1261 kes Fix some of the mtx-changer grep commands for tape label readers.
1262 kes Convert a number of bsendmsg into the appropriate send/warning/error
1263 message class calls.
1264 kes Suppress the using database message in the .sql command.
1265 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1267 kes Add context menu for floating a window.
1268 kes Some minor cleanup and name changes in qt-console
1269 kes Add doing mt setblk 0 in Win32 mtx-changer.
1270 kes Apply Martin's bug fix to move definition of ENODATA for
1272 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1273 sqlite2 and sqlite3.
1275 kes More pruning cleanup.
1276 kes Turn on wait_for_drive by default in mtx-changer.
1277 kes Turn on Batch insert code by default as it now passes regression.
1278 kes Add ./configure --enable-bat to enable building of Bat.
1279 No install yet though.
1281 kes Implement a new .sql command for bat.
1282 kes Implement code to turn off pruning in obtaining the next volume.
1283 Pruning is turned off for the status dir command, but turned on
1284 for SD requests and for the list nextvolume command.
1286 kes Correct Qmsg() that was not updated correctly when committing a
1287 previous change (probably the recent TLS patch).
1289 kes Write new subroutine is_volume_purged() that explicitly checks
1290 if the Volume is purged, and if so marks it as such. This should
1291 resolve problems reported about needing to mount twice to recycle
1293 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1294 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1295 amount of duplicated code.
1296 kes Do volume pruning only for the Media Type desired (reduces pruning time
1297 if multiple Media Types are in the same pool).
1298 kes Implement more detailed info in the Job report for the Bacula version
1300 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1302 ebl Add bbatch tool to bench database and insert mode.
1303 Fix sql quote stuff in batch mode
1304 Fix sql stuff for mysql
1306 kes Correct problems with am/pm scheduling. Fixes bug #808.
1307 kes Implement new prunning code that prunes up to 1000 jobs at
1308 the same time. The same technique can be applied to a number
1309 of other prune/purge subroutines.
1310 kes Add an insanity check when starting a new tape job to ensure
1311 that the tape position has not been changed. If so fail the
1313 kes Fix Win32 build for dlls to add the folllowing:
1314 src/lib/bsock.c -- new file with new entry points
1315 src/lib/dlist.c -- new entry points
1316 src/cats/sql_create.c -- new entry point
1317 src/cats/sql_cmds.c -- new DATA item exported
1319 ebl batch mode cleanup bscan-test is ok now.
1320 kes Implement SD code to check length of disk volume before appending.
1322 kes Correct return status on db_batch... routines.
1323 kes Add call to db_write_batch_file_records() to migration code.
1324 ebl Fix AfterJob timing
1325 kes Move the checking of the database in initializion of the Director
1326 to after we drop privileges. This avoids the need for both root
1327 and bacula access to the DB.
1328 kes Correct a misplaced variable definition in src/filed/backup.c
1329 kes Correct how the new batch insert db_create_attributes_record()
1330 uses the arguments. Caused a seg fault in bscan.
1331 kes Implement lock() and unlock() methods in DEVICE class.
1332 Implement block() and set_block(xx) methods in DEVICE class.
1333 kes Modify bnet_connect() so that it uses time() to check for the
1334 wait time expiring (on some OSes, some system calls may not
1335 return immediately).
1336 kes Modify Verify to obtain the previous JobId when it is actually
1337 running rather than at schedule time (as it was in 1.38.x).
1338 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1340 kes When checking pid in pid file, continue running if the pid is
1341 the same as ours. This occurs on IRIX after a system crash.
1344 kes Extend new GUI API.
1345 kes Make the ua structure a class, and implement send_msg(),
1346 error_msg(), warning_msg(), and info_msg().
1348 kes Apply fix from for building wx-console on the Mac from
1350 kes Implement new select mechanism for GUI programs.
1351 kes Reorganize initialization of stackedWidgets in bat.
1353 kes Add updated nagios plugin supplied by Christian Masopust.
1355 kes More bat implementation.
1356 kes File migrate bug with Pool Occupancy using mediaid instead
1357 of jobids. Fixes bug #795.
1358 kes Fix orphaned buffers in filed backup and verify due to
1359 crypto buffers not freed during errors. Fixes bug #789.
1360 kes Extend new GUI api code to tree commands.
1361 kes Ensure that tree and dot commands check console ACLs.
1362 kes Permit marking directory with trailing slash.
1363 kes Allow 20 console connections (instead of only 10).
1365 kes Add smartctl call to bacula-sd.conf as an example of getting
1368 kes Modify jobq.c to let simultaneous restore jobs run. This may
1369 cause them to fail if they cannot get a drive.
1370 kes Add Client Connect Wait to Storage daemon to permit users to
1371 modify the time the SD waits for a FD connection.
1373 kes Correct virtual changer check which was backwards. This caused
1374 volumes to be unloaded into slots already occupied.
1376 kes Apply Command ACL filter to JobId list in restore command.
1377 kes Correct typeo in var.c patch.
1379 kes Don't let Bacula prune File or Job records for the current Job.
1380 kes Fix variable substitution pad + inc bug reported (with patch)
1383 kes Correct SQLite log table index as reported by Luca Berra.
1385 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1387 kes Begin implementing new comm signals for API.
1388 kes Fix a few places in lib/message.c where the open fd may
1390 kes Continue implementing lib/bsock.c (real class). Make jcr,
1391 who, host, and port private. There are new methods to access
1392 them for non-class use. This required touching a number of files.
1394 kes Add LANG=C to autoconf/randpass so it works with languages other
1395 than English. Fixes bug #788.
1397 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1399 You will not be able to generate Include/Exclude list any more.
1400 It will be fixed soon.
1401 If you want to use this, you can apply
1402 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1404 kes Restore of sockets created false error messages because Bacula
1405 no longer restores sockets, but the code was still trying to
1406 set the attributes on a non-existent file. Reported by a user.
1407 ebl finish RecyclePool feature
1408 Media will takes Pool.RecyclePool
1409 when moving from Scratch to a Pool or when user will do
1410 update volume=xxx frompool
1411 To use it, add RecyclePool = aPool to your Pool resource
1414 RecyclePool = Scratch
1418 kes Expand new BSOCK class adding signal() and new BNET signals.
1419 kes Begin enhancing the dot commands adding a new API function
1420 that returns more information and will make it easier
1421 to interface to the Director from a program.
1423 kes Make DEVICE fd private. Its new name is m_fd, and can be
1424 obtained with dev->fd() outside the class. This is the
1425 first of many DEVICE members to be made private.
1426 kes Implement Michael Renner's idea on having a virtual disk
1427 changer. I made some minor modifications (e.g. I did not
1428 implement the Virtual Changer directive, but simply set
1429 the Changer Command to an empty string.
1431 kes Implement a BSOCK send() method that writes the whole record
1432 in a single write() request rather than in two.
1433 ebl add update volume=xxx recyclepool=yyyy
1434 volume takes recyclepool from pool when using update volume=xxx from pool
1436 kes Fix encryption deblocking bug, which caused some restored files
1437 to be truncated. This fixes bug #763.
1438 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1439 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1441 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1442 ebl Use btime_t instead of uint64_t in media patch.
1444 kes Optimize the use of the database a bit in the Status dir command.
1445 Only open it when needed, ensure that if any previous database
1446 was opened, it is closed.
1448 kes Correct VolCatBytes bug from media patch.
1449 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1450 in the case of orphaned records.
1451 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1452 and File records in 300K chunks to be more efficient. This
1453 idea came from Juan Luis Frances (if I remember right).
1454 kes Apply Eric's scratch patch that moves a purged Volume to
1455 the RecyclePool. Question: how is RecyclePool set? what
1456 happens to the ScratchPool?
1457 kes Apply Eric's media patch that collects read/write media
1458 times as well as byte counts. This patch requires a
1459 simultaneous upgrade of the DIR and SD. Note, there
1460 should be some way to turn off timing. I'm not sure
1461 times are in Bacula units.
1462 kes Apply Eric's batch-insert patch.
1464 kes Update projects list.
1466 kes Implement Include/Exclude file lists in FD as dlists using
1467 the new dlistString class. This permits efficiently having
1468 large include/exclude lists and completes project Item 25.
1469 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1470 console is authorized to cancel the job. This fixes bug
1472 kes Modify SD so that the VolCatJobs medium record is updated
1473 at the beginning of a Job rather than the end. This
1474 fixes bug #775 where exceeding MaxVolJobs caused jobs
1476 kes Added a mutex around getting and setting Volume information
1477 so that multiple simultaneous jobs will single thread.
1479 Switch to using Subversion
1480 kes Remove src/pygtk-console/ from configure
1482 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1483 plus the entrypoints.
1484 kes Apply patch supplied that corrects debug print
1485 in canceling jobs for max run time. Supplied as
1486 part of bug #621, which was previously fixed.
1488 kes Test on job_canceled() and sd_msg_thread_done inside
1489 loop starting the message thread to avoid a race condition.
1491 kes Remove rl_catch_signal from console.c as it conflicted
1492 with the header definition. Fixes bug #765.
1493 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1495 kes Clarify some stored/acquire messages to indicate if the
1496 problem is with read or append.
1498 kes Fix memory leak with storage ids in cats/sql_get.c
1499 kes Terminate watchdog earlier to avoid reference to released
1500 memory -- reported by Jason Austin.
1501 kes Move closing the database from jobq.c to the director daemon
1502 termination routine. This fixes memory leaks for shadow jobs
1503 (i.e. migration jobs).
1504 kes Free up the unique jobid chain items in migrate.c. This fixes
1505 a memory leak problem.
1506 kes Convert some ugly looking for statements to use foreach_alist
1507 in findlib/find.c. This will facilitate converting the structures
1508 to use dlist (for large include/exclude lists).
1509 kes Fix a bug in the btree.c and btree.h routines, then rename them
1510 rblist and add them to be built in src/lib. Include some new
1511 methods written by Rudolf Cejka that make the code more readable
1512 (hides some of the ugly casting).
1513 kes Add set_next() and set_prev() methods which make the code much more
1514 readable. Also add a new dlistString class that facilitates storing
1515 strings in dlists. To be used in the large include/exclude lists.
1516 kes Make some trivial modifications to lib/tree.h that use rblist
1517 rather than dlist for storing the tree links. This was suggested
1518 by Rudolf Cejka. The result of this is that the restore tree now
1519 uses red-black binary trees rather than simple linked lists. This
1520 should give rather dramatic speed improvements for directories
1521 contining large numbers of directories/files (more than 10000).
1523 kes Fix maxruntime bug #621.
1525 ebl Implement the include JobID in spool file name project.
1526 kes Reorder projects file in order determined by Jan 2007 vote.
1527 kes Implement item #12 on project list -- quick release of FD by
1529 kes Fix open of SQLite3 db where user does not have write permission
1530 so that DIR does not crash. Fixes bug #761.
1532 kes Add back missing @ in Win32 Makefile.
1533 kes Change 'Device not configured to autolabel' from INFO
1535 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1536 which should restart an indefinite # of times.
1537 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1538 other DIR specifications.
1540 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1541 Fix path quoting in SQLite scripts.
1542 Fix problems with SHGetFolderPath.
1544 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1546 kes Fix Job restart on error bug that promotes an Inc to a Full
1547 backup. This should fix bug #755.
1548 kes Add qt-console and first cut of code.
1552 kes Fix Bacula->Documentation link on Win32 to point to index.html
1553 instead of bacula.html. Fixed bug #750.
1554 kes Return JobId in db_get_job_record() when JobId==0. This should
1556 kes Do not release source pointers when restarting a failed job.
1558 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1559 This *should* fix bug #747.
1560 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1563 kes Modify USTORE constructor to set an empty store_source string,
1564 and don't copy the store_source string in a cancel. Hopefully
1565 this will fix Arno's seg fault, bug #744.
1566 kes Add back code to disable conio in configure. Fixes bug #743.
1567 kes Correct the Options scanner in the FD to correctly handle
1568 SHA1 option, which was eating the next option. Reported by
1570 kes Add code to indicate when the SD is spooling, spool wait, and
1571 despooling as requested by Alan Brown.
1573 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob