1 Technical notes on version 2.3
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
20 Improved status commands for Bat
21 Spooling/despooling status
22 Implement ftruncate for NFS devices
23 Add long term statistics job table
28 ebl Tweak autoconf scripts for faketape
30 kes Improve SD reserve debug code.
31 kes Testing an improvement to free up volumes no longer in use.
33 kes Rework SD acquire for read to handle autochanger Volume
35 kes Implement regression that explicitly tests swapping a Volume
36 from one drive to another.
37 kes Enhance disk-changer to detect most error conditions.
38 kes Fix SD code so that it properly swaps a Volume between drives.
41 kes Apply libdbi patch from Joao Freitas for regress and for
42 Bacula trunk. Regress now works with libdbi. Nice.
43 kes Apply .nobackup patch from bug #1077 submitted by
45 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
46 name into jobs cloned via the run directive.
48 kes Prevent a Volume that is being swapped from being freed from
49 the volume list. This will most likely fix, at least partially,
51 kes Fix strippath so that it does not get a buffer overrun and crash FD.
53 kes Remove 50 millisec wait in SD that broke debugger.
54 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
55 that a job may run, counted from when the job was scheduled.
56 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
57 a job may block waiting for a resource, counted from when the job starts
58 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
59 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
60 that implements multiple commands per line in the console when using
61 readline. Modify the default to use a semicolon as the command separator.
63 ebl Fix SQL query in migration code.
64 ebl Make accurate mode with hash disk pass regression tests
66 ebl Implement first cut of accurate backup with hash disk.
68 kes Force unload of volume when wrong volume mounted in SD.
70 kes Fix bat seg fault at termination.
71 kes Add Bacula generated version to bat about box.
74 kes Experiment with allowing multiple read jobs.
75 kes Move final volume swapping code to DCR method and
76 call it from acquire_for_read().
77 kes When wrong volume is mounted during read, unload_autochanger.
79 kes Integrate the libdbi changes from Joao Henrique Freitas
81 kes Stop searching for Volumes in SD askdir if DIR returns the
82 same volume name twice in a row.
83 kes Close bat console windows first to eliminate error message
86 kes Tweak the swap Volume from one drive to another code so that
88 kes Resolve several problems with recycling that broke the new
89 code (these problems are in 2.2.9 as well).
90 kes Remove the volume lock when calling the sysop code.
91 kes Don't mark a reserved volume with no writers as unused otherwise
94 kes Rework class structures for VOLRES, DCR, and DEVICE to make
95 the method names a bit more logical, and for more logically
96 handling the responsibilities.
98 kes Remove redundant code in terminating the scheduler that just
99 causes a seg fault in many cases.
100 kes Cleanup releasing a volume and make it a DCR method.
101 kes Improve algorithm for detecting pre-reserved volume and
104 kes Tweak volume swapping code so it works.
105 kes Correct name overloading in mount.c
106 kes Replace released flag in VOLRES with reserved and add access
107 methods for the VOLRES class.
108 kes Prevent volume from being released while being swapped.
109 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
111 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
113 kes Refactor parts of stored/mount.c
115 ebl Add sanity checks for VolWriteTime and VolReadTime
116 ebl Take care of bad clock changes while computing VolWriteTime
117 and VolReadTime. This should fix or limit #1066
118 kes Correct error string numbers in dird/catreq.c
119 kes Restructure reserving, acquiring, and mounting volumes. Calls to
120 autochanger are deferred for mount.c -- simplifes the code.
122 kes Do not prune any running job. It just fails the job.
123 kes Lock the volumes when changing dev->reserved_device and marking
124 the volume unused otherwise the device can get reserved by
125 another job before the volume is released, thus blocking it.
127 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
128 kes Fix bug #1063, reuse of freed ptr in list nextvol.
129 kes Release regex compile buffer in filed/job.c
130 kes Add proper type of const char in sql_create.c
131 kes Turn off debug in daemon termination routines
132 kes Move free_volume_list() before devices are freed in stored.c
133 kes Fix reference to uninitalized stack variables in bregex.c.
134 This should correct bug #1067.
136 kes Fix possible seg fault in SD when freeing a volume entry.
138 kes Implement unload_dev() before swap device.
139 ebl Add statistics prunning with option and menu
140 kes Separate unload_dev() from unload_other_device() in autochanger.c
142 kes Apply patch from bug #1069 that corrects spurious error messages
143 when ACLs enabled on SGI but no ACL exists.
144 ebl Fix small segfault in bacula-sd when debug level is 500
145 kes Modify run_program() and run_program_full_output() to use
146 call by reference for the results string. This corrects a long
147 standing problem where the address of the string may be changed
148 in the subroutine but not in the calling program.
150 kes Re-enable code to remember last volume mounted on a non-tape
152 kes Add patch supplied in bug #1068 that fixes a SD crash when using
153 a Virtual autochanger.
154 kes Generate correct JobMedia records during spooling/despooling when
155 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
156 <tih@hamartun.priv.no> for excellent analysis and testing.
158 kes Tweak hash algorithm for htable using Martin Simmons idea
159 for doing a circular shift.
160 kes Remember what volume is in VTLs (previously turned off for
162 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
163 pointed out some problems in creating JobMedia records during
164 spooling with concurrent jobs. Fix the problem by updating the
165 start file position before despooling and generate a jobmedia
166 record at the end of despooling.
168 kes Fix handling of JobMedia records during spooling and when a
169 Volume is changed without actually writing data to the Volume.
171 kes Rework certain SD locking based on gdb tracebacks of deadlocks
172 sent by Eric. This code now uses only the volume_lock() rather
173 than the reservations lock when at EOM and acquiring a new
175 kes Ensure only one exit point in several subroutines.
177 kes Implement bsock code to permit locking. Use the new code in Verify
178 in the FD to prevent the heartbeat thread from disrupting the Verify
179 data sent to the Dir.
180 kes Modify SD locking to eliminate locking the reservations system from
181 outside the system. Use the volume lock when getting media data
182 and reserving a new volume at end of media.
183 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
184 when SD starts are not locked into place.
186 kes Fix error compiling runscript code on 64 bit machines.
187 kes Tweak Win32 mount point code.
188 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
189 cleared giving bad file estimate).
190 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
193 kes Keep Schedule run lists in order as suggested by
196 kes Implement autostart scripts for Debian.
197 ebl Implement upgrade catalog scripts.
199 ebl Apply jobstat patch for long term statistics. Have to implement
200 purge stats command and upgrade scripts.
201 kes Fix mtx-changer.in for broken Debian mt program.
203 kes Fix large number of JobMedia records reported by Eric Bollengier.
205 kes Apply doc fix from bug #1062.
206 kes Resolve crash and improper restore wx-console Win32 restore
207 GUI. Fixes bug #1065.
208 kes Update Win32 wxWidgets to latest version.
209 kes Attempt to do correct handling of Win32 mount points. Should
211 kes Fix Win32 FD backup/restore memory leak due to improper termination
212 of BackupRead/Write. This fixes bug# 1038.
214 ebl Reduce memory usage for accurate backup, working only with ctime
215 and mtime. (not all Lstat field)
216 About 40MB for my linux system (400.000 files)
218 kes Add dcr->reserved_volume flag that allows us to release a volume
219 even if it is not vol->released. This allows maxvol2 to work when
220 Volumes expire and we are already writing to the device (i.e. a
221 volume is pulled out from under us by another job terminating after
222 we reserve the drive).
224 ebl Permit multiple command/console per runscript definition.
225 RunScript { command = /bin/true ; command = /bin/false ... }
226 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
227 (restart an application) just after the VSS snapshot on windows.
228 kes Don't zap dcr values during release_volume() as they might
229 have the next Volume to be mounted.
230 kes Fix AIX prototype.
232 kes Second cut of drive switching during backup.
235 kes Update Win32 version of wxWidgets to most recent version.
236 kes Tweak Copy job details.
237 kes Rework dir_find_next_appendable_volume to make a bit more effort
238 to find a suitable volume before giving up.
240 kes Make ask_sysop_to_create... to return if waken from wait.
241 This helps get out of blocked conditions.
242 kes Experimental implementation of switch_device in reservations.
243 kes Implement FD version to allow easier protocol changes.
244 kes Add Plugin Options string -- not yet passed to FD.
245 kes Implement PluginOptions ACL.
247 kes Attempt to correct problems with restores with autochangers and
248 use counts going negative
249 kes Rework SD status command and implement API for bat. Implements
250 header, runing waitreservation, devices, volumes, spooling,
251 and terminated status keywords.
252 .status storage=xxx <keyword>
253 kes Clarify TLS error message by adding double quotes around name.
254 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
255 kes Pass jcr to tls routines so debug messages can be handled better.
256 kes Rework jobq resource allocation code, and possibly fix a bug
257 that caused reference counts to get out of sync.
259 kes Rename fd/dir plugin to use Bacula standard underscore.
260 kes Plugin work -- bring dir up to fd level.
261 kes Start implementation of VTL code
262 kes Fix Win32 build after adding new cats subroutine.
264 kes First cut at Duplicate Job implementation.
266 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
267 kes Start PluginOptions string, and refactor a bit of ua_run.c
268 ebl Apply Allan patch that permit to reset recyclepool.
270 kes Test patch -- possible fix or improvement for bug #1053
271 kes Refactor FD and SD status commands to permit new API code in
272 SD, and to fix Win32 build.
273 kes Win32 build is now working.
275 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
276 some ideas in patch from Scott Bailey.
277 kes Begin implementation of duplicate Job control.
278 kes Fix some of Win32 build after recent additions.
279 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
280 which causes the FD to detect whether or not the OS has the
281 honor no dump bit (*BSD systems), and if so, to skip backing up
282 any file with this bit set. The feature is enabled by setting
283 'honor no dump flag = yes' in the Options section of a FileSet.
285 kes Correct po warning message with datarootdir
286 kes Implement more code in dird.c to put configuration parsing in
287 a class rather than use globals.
288 kes Restructure SD status command for implementation of bat API
291 kes Suppress incorrect 'Will not descend from x into y' messages.
292 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
293 daemon globals used by parser.
294 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
296 kes Fix free of plugin_list when none exists.
298 ebl Apply accurate project patch.
300 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
301 on non-mempool object)
302 kes First cut of converting FD .status to work with bat API.
304 .status client=XXX header
305 .status client=XXX running
306 .status client=XXX terminated
307 kes Implement first cut of Copy Job.
308 kes Implement Catalog in Pool resource. It overrides catalog specified
309 in the Client resource.
311 kes Apply patch (with some difficulties) from Joao Henrique Freitas
312 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
314 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
315 ftruncate() actually works. In the case of some (cheap) NAS devices,
316 it does not, and so recycling NAS Volumes does not work. The code
317 simply unlink()s the file, then recreates it. This fixes bug #1011.
319 kes First incomplete cut of big malloc blocks for htable.
320 kes Tweak plugin code.
322 kes Plugin debug code + tweak a couple bat dialog layouts
324 kes Fix creating first JobMedia record during Migration to include
325 proper index. This caused slow restores of migrated jobs.
326 kes Temp fix to plugin name file_index.
327 kes Bacula backed up and restored a MySQL database.
329 kes Implement plugin restore.
330 kes Implement parsing of db_driver to give db_type index.
332 kes First cut of plugin restore code.
333 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
334 and do not strip paths on symbolic links.
335 kes Set catalog backup database and user name from values specified on
336 the ./configure line.
337 ebl Fix #1031 about wrong pool source information in job report.
340 kes Remove a redundant jcr argument to find_files, match_files, and
342 kes Implement '.status dir header|scheduled|running|terminated' that
343 prints the requested status section. With the exception of the
344 header, the other reports have fields separated by tabs (\t).
346 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
347 a resource embedded run command to find a since time if no explicit
348 since time was supplied on the command line.
349 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
350 that updates the state file at job termination time in addition to
351 when the daemon terminates.
353 kes First version where a plugin did a backup.
354 bpipe-fd.so created a backup file, wrote a test
355 string to it, and Bacua could restore this fabricated file.
357 kes Implement DB Driver = string for the DBI driver.
358 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
359 kes First cut of code for loading Win32 plugin dlls. Implement
360 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
361 and implement a dlfcn.h file based on opengroup's definitions of
364 kes First cut plugin directives.
366 kes Apply patch from bug #1049 to prevent stripping the path on a
368 kes Attempt to fix bug #1047 where stripping a path corrupts the
369 heap. Waiting for feedback.
370 kes Correct the Mount message not to suggest labeling a new tape
371 when doing a restore. Submitted by email by John Stoffel.
372 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
373 FD by using casting. Reported in bug #1042.
375 kes A bit of crypto cleanup. More later.
377 Release Version 2.2.8
379 kes Apply patch from Martin to correct bug #1040, bscan sets existing
381 kes Fixed important spelling error in doc -- bug #1045.
383 ebl Fix bextract to be able to extract non-portable Win32 data to
385 kes Move initialization of read/write res lock earlier in the code.
386 This fixes the crash with a null conf file. This fixes bug
388 kes Redefine CURES in lib/parse_conf to be URES and move it all
389 into lib/parse_conf.c -- this responds to bug #1042, but does
390 not fix it. The fix is not to compile with FORTIFY_SOURCE.
391 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
392 the trunk SVN. I don't think this was reported as a bug.
394 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
396 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
398 kes Add DataDespooling and DataCommitting status (committing is
399 the last despooling).
400 kes Finish implementation of new reservations code noted below.
402 kes Fix bsnprintf for float point numbers. I broke recently when
403 parameterizing some variables. This fixes bug #1036.
404 kes Undo recent reservations changes ... will apply them later
405 when they work better.
407 ebl Fixes #1034 which cause mysql to hang the connection after 8h
408 ebl Change default statistics target of filename.name and path.path
409 fields for PostgreSQL. This speeds lookup by indexes. Thanks
411 kes A few more tweaks to new reservation code. Make sure to clear
412 vol released flag when retaking volume. When reading label and
413 label is bad mark volume unused. When recycling, mark volume
414 unused so it can be renamed.
416 kes Fix reserve_volume() so it doesn't release a volume in use
417 (i.e. a volume entry not marked released). This should be
418 the last part needed to fix bug #1018.
420 kes Move Heartbeat documentation from Job to Director resource.
421 This fixes bug #1033.
423 kes Fix existing switch drive SD code to call autochanger to release
424 any old volume. This must be done to keep the autochanger from
425 releasing subsequently newly reserved volumes in doing a close().
426 This should fix bug #1018.
427 kes Fail if attempting to get console input in batch mode. This
428 should help fail RunScript console commands that are incomplete.
429 kes First cut implementing switch_drive() in SD (not actually called).
431 kes Implement first cut running console commands in a RunScript.
433 ebl Fixes bug #1028 where 'Selection Type' option was not usable
435 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
438 Release Version 2.2.7
440 kes Add new free_tls() entry point so that Win32 builds.
441 kes Fix compile warning in src/lib/util.c
442 kes Fix entry point for edit_job_codes() so that Win32 builds.
443 kes Fix seg fault Frank Sweetser reports in regression testing
444 on his systems. The problem was that the original author of
445 bsnprintf.c did not take into account the side effects of
446 using ++x in the argument to a #define.
447 kes Make SD protocol backward compatible with version 2.2.x.
449 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
450 because Bacula no longer restores sockets.
451 ebl Always use ignorecase fileset option on win32 FD.
453 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
454 that implements double quoting include names in conf files,
455 and also allows piping input by having the first character
456 be a vertical bar (|).
457 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
458 that implement %f in RunScripts to pass the FileSet name.
459 kes Skip leading | when lex input comes from a pipe as suggested
460 by Michael Stapelberg <michael@stapelberg.de>.
462 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
463 Nerijus Baliunas <nerijus@users.sourceforge.net>
465 kes Implement Plugin Directory and plugin events.
467 kes Implement a security enhancement: TLS authentication but no
468 encryption. Enabled by setting 'TLS Authentication = yes'.
469 Note when this is on, TLS encryption is turned OFF!
471 kes This patch corrects a problem where the maximum concurrent storage
472 jobs counter gets out of sync during restore jobs causing jobs to
473 'wait on max Storage jobs'. This patch fixes bug #1009.
475 kes This patch fixes bcopy so that it produces correct Volumes.
477 kes This patch eliminates spurious output to the console during a VerifyVolume
478 job that contains encrypted data. It fixes bug #1024.
480 kes This patch prevents the 'status dir' command from trying to use a scratch
481 volume and possibly moving it from one pool to another. This patch fixes
484 kes Add new include to postgresql.c suggested by Marc Cousins so
485 that it compiles correctly with pgre version 8.3.
487 kes Fix --archivedir addition to configure. Replace it with
488 --with-archivedir in configure.in This fixes the regression
490 kes This patch fixes bug #1012 where the job is canceled because
491 of Max Run Time exceeded when the job has not yet started.
493 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
494 one 'part' to write. Instead of each part being stored on disk,
495 written to DVD, then deleted from disk, all parts are written to disk,
496 and only the last is written and deleted from disk.
497 kes This patch fixes the status command to include the formating string for
498 JS_AttrInsterting. It fixes bug #1021.
499 kes This patch should fix the Mac OS X build problem on the latest
500 Darwin, where sys/types.h was not included correctly (apparently
501 due to a change in the Mac headers). The solution was to explicitly
502 ensure that it is defined for the ./configure.
503 This patch also has a rebuild of configure that includes the Debian
504 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
505 kes This patch should ensure that queued messages to the console are
506 displayed as soon as possible. It should fix bug 1007, but has been
507 reported not to work.
509 kes This patch fixes the infinite loop when trying to increase the
510 maximum number of volumes in a Pool during the add command.
511 This patch fixes bug #1008.
513 Release Version 2.2.6
515 db Remove extra data on estimate command in joblist for bat.
517 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
518 really change anything, but is the beginning of doing it *right*.
519 To do it completely right the LastWritten date must be passed to
520 the SD, but it is not yet done.
521 kes Minor tweaks to some bat restore SQL.
522 kes This patch fixes bug #1003 where putting the message output from
523 a Verify job into the catalog results in a recursive loop. The problem
524 seems to show up only with postgresql (to be verified).
525 kes Correct %x to %p in postgresql debug statement.
527 kes Fix bug #942 where lots of emails where generated when the heartbeat
528 interval was low and Bacula wanted a different tape from the one in
531 ebl Add new SD despooling attributes and Dir inserting attributes
532 job status codes in the catalog (Status table).
534 ebl Use qmake-qt4 instead of qmake when available (debian system).
536 kes Add a security warning to src/cats/make_catalog_backup.in indicating
537 that passing the password via the command line (arg 3) is insecure.
538 This responds to bug #990 (it doesn't fix it).
540 kes Set default debug_level to zero. This corrects bugs #991 and #993.
541 kes Fix a crash in bat when it cannot connect to the Director for example
542 if the Director is not running.
543 kes Remove redundant INDEX (JobId) from File table in the trunk.
545 kes Make explicit exception to GPL in LICENSE to permit linking
546 the Win32 FD with Microsoft VSS code.
547 kes Apply the Solaris package patch from
548 Masopust, Christian <christian.masopust@siemens.com>
549 kes Apply the patch to optionally add a timestamp in the debug output
550 submitted by Mariusz Czulada <manieq@wp.eu>.
552 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
553 backend (sql_strerror). Fixes bug #989
555 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
556 It applied with no problems.
557 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
559 kes Redirect stderror to stdin on mt status command in mtx-changer.in
560 since the status is returned on stderr on Solaris.
561 kes Activate Close button on tray-monitor window. This fixes
563 kes Check for NULL item in parse_conf.c before calling it. In the
564 case of Device, there is no item and this caused a seg fault when
565 Device appears in the conf file.
566 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
567 avoids pulling in config.h multiple times in some new code.
569 kes Fix spurious warning message printed when creating a volume with
570 a LabelFormat. This fixes bug #976.
572 Release Version 2.2.5
574 kes Add JobId in place of Job name in all the Jmsg() output.
575 kes Correct the APP_DESC for the Win32 storage service (remove an e).
577 kes Make maxvol-test and new more strict maxvol2-test work.
578 kes Print JobId in all Jmsg() job output.
580 kes Add new SD despooling attributes and Dir inserting attributes
581 job status codes. This fixes bug 961.
582 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
584 kes Fix doc issue. This fixes bug #963.
585 kes Fix listing performance problems in bat. Pointed out by
587 kes Remove old debug code.
588 kes Fix bat code that tests for Win32. This should fix bug #968
589 kes Query 5 list wrong Vol after migration. This fixes bug #960
591 ebl Fix #969 where user can't change Replace option in restore menu.
593 kes Save jcr in thread specific data (tsd) for each thread.
594 kes Make Dmsg() print JobId as -%u.
595 kes Make Jmsg, Emsg, and others automatically pickup the jobid
596 for the thread if it exists.
597 kes Remove old reservation debug jid code.
598 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
599 ebl Add an option that permit to specify spool size in job
600 definition. (Applying patches/testing/spoolsize_per_job.patch).
601 You must upgrade SD and DIR at the same time.
602 dvl Add new configuration item --archivedir
603 dvl Adjust regression tests to use tmp not /tmp. This will allow
604 multiple concurrent runs of the regression tests.
606 kes Fix race condition that drops final block written to volume.
607 This happens in rare cases with multiple simultaneous jobs
608 when the Volume fills. This fixes bug #964. May be related
609 to bug #935 and possibly #903.
610 kes Eliminate more strerror() and replace with bstrerror().
611 kes Remove BSD getopt and replace with unrestricted IBM version.
612 kes Fix Win32 build for changed calling sequences.
613 kes More tweaks to the mount volume routines to get everything
614 right. Changed variable name from find to have_vol, which is
615 much easier to understand.
616 kes Enhance btimer debug code.
618 kes Fix FD->SD authorization failure, which was due to spurious
619 wakeups from a pthread_cond_timedwait(). Simply check the
620 predicate before continuing. This fixes bug #953.
621 kes Add const char where needed (more to do). Remove temp debug code.
623 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
624 kes Don't overwrite error message in check_tables_version.
626 kes Unlock batch insert tables with same calls used elsewhere.
627 kes Allow starting 59 jobs a second.
628 kes Make SD session key more random.
629 kes Add retry for SQLite opening db if it fails. Probably helps
631 kes Suppress extra error messages during batch insert failure.
633 kes Add jcr to timer packets so if killed message can be sent to job.
634 kes Add JobId to all Dmsg() output.
635 kes Put some FD auth code on dbglvl rather than fixed.
636 kes Return insert attributes error message in db msg buffer to avoid
637 false error messages. Helps fix bug #966.
638 kes Separate batch init error messages. Probably helps fix bug #966.
639 kes Make SD code that contructs attribute insert check string lengths
641 kes If Dir gets an error during inserting attributes, cancel SD.
642 This reduces unnecessary error messages.
644 kes Correct search boolean for getting Volume info
645 ebl Cleanup batch insert code. Probably fixes bug #965.
646 kes Back out one small change to the reservation system (reserving a volume).
647 kes Rework how a Volume is mounted. It is now much more intelligent and
648 will always attempt to use any mounted volume if possible and reduces
649 calls to the Director asking about volumes.
651 kes Turn off some code when batch insert not enabled.
652 kes Edit FD name in connect error messages.
653 kes Rework the reservation system to take into account that the Director
654 might give us a Volume that is different from the current one being
655 used, and to ensure that we don't exceed Maximum Volume Jobs.
656 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
657 fatal error with multiple jobs running'
658 kes Add more debug code in reservation system.
659 kes Implement maxvol-test to check bug #947.
661 kes Add code to handle tray monitor separated from Win32 FD.
662 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
664 kes Add missed return in fixing verify bug -- trunk only.
665 ebl Fix a command parser issue causing a director segfault.
666 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
668 kes Increase the max block size to 4MB fixes bug #957.
669 kes ERABT if user sets min block size > max block size. Fixes bug #956.
670 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
671 is not properly mounted (recognized) during a poll.
672 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
673 Job that has differences reports Verify OK.
674 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
676 ebl Add an option to operate on all pools with update vol parameters.
677 This complete the project 20. Patch from Nigel Stepp.
678 ebl Add history support to bconsole when using readline.
679 Using Ctrl-D to exit doesn't update .bconsole_history
680 kes Modify new volume algorithm to use max MediaId for generating next
681 volume number rather than the count of Volumes. This should essentially
682 eliminate the failure rate if some volumes were deleted. Bug #921.
683 kes Begin implemention of Optimize Job Scheduling.
684 kes Implement restore callback that Dirk and I agreed on for bat
685 restore. This fixes bug #928. Restore of backup of zero files fails.
686 kes Fix SQL Catalog logging which broke with new db_escape_string
689 Release Version 2.2.4
691 kes Fix bacula_cats.def for new db_escape_string().
692 kes Increase size of name string when FD making connection to SD.
693 May fix bug #953. FD->SD connection failure.
695 kes Add code to help Dan debug 2drive-incremental-2disk test.
696 kes Add code to try to fix bug #908.
697 kes Add waits to multiple exit detection code to try to force pid
698 file to always be deleted.
699 kes Restore good dev.tar.gz to rescue set appropriate binary property.
701 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
702 trying to switch drives by checking for blocking before unblocking.
704 kes Cancel storage daemon in all cases where FD reports error. This
705 should fix virtually all cases of bug #920.
706 kes Fix db_escape_string() for MySQL which did not compile.
708 kes Fix error message that was clobbered when Dir tells SD it does not
709 have write permission on Volume. This should fix a minor point
710 in bug #942, but not the main problem.
711 kes Add code to cancel job in SD if FD connection fails. This should
713 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
714 dvl Pass jcr and db into db_escape_string() to enable better escaping
716 kes Fix migration code to get correct Volume name with multiple volumes
717 by skipping |. Fixes bug #936.
718 kes Implement patch supplied by Landon to fix bug #944 where using
719 TLS with bconsole uses 99+% of the CPU.
720 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
722 kes Move patches into patches directory.
724 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
727 ebl Using 'm' in bconsole will show messages like before,
728 and not memory usage.
729 kes Fix bug #935, and probably also bug #903 where files were not
730 restored. MediaId was not properly set in JobMedia record after
733 kes Suppress chown and chmod error messages if the FD is not running
736 kes Apply Martin Simmons' patch that should turn off the new API usage
737 when batch insert is turned off allowing building on older
739 kes Add ./configure search in qwt-qt4 for qwt package
741 kes Bacula is now free of 3rd party GPL copyrighted code!
743 kes Add guid_to_name.c/h which replace idcache.
744 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
746 ebl Detect if new PosgreSQL batch insert API is present.
747 kes Correct incorrect mempool call causing Director crash. Occurs on
748 systems without va_copy().
749 sb Update spec files for 2.2.1 release
751 kes Fix memory pool call in ua_output.c. bug #934.
752 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
753 Add test program to fnmatch.c
755 kes Integrate patch to README.vc8 from
756 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
757 edit it to get it into Unix patch format.
758 kes Implement mkpath.c to replace old FSF makepath.c
760 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
762 Release Version 2.2.1
764 kes Update POTFILES.in
765 kes Cleanup a few underquoted AC_DEFUNs in configure
766 kes Apply patch from Martin Simmons that adds a test for va_copy to
769 kes Fix bug #921 by increasing the number of tries to create a new volume
771 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
772 can be called multiple times. Implement a version for machines
773 without va_copy() that gets a big buffer.
775 kes Integrate more portable zone offset code into bsmtp.c
776 Submitted by Attila Fülöp.
778 kes Fix bad SD->FD return status reported by
779 (James Harper) <james.harper@bendigoit.com.au>
780 ebl Fix a bug in read_close_session which return random status
781 thanks to James Harper
783 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
784 and directory names during restore of single file/directories.
785 kes Add sanity checks to .sql command when string is empty. Hopefully
786 that will resolve Dirks Director crash.
788 kes Apply patch submitted by Martin Simmons that corrects a seg fault
789 in the bsmtp chat subroutine when debug is >= 10.
791 kes Fix Director crash when running bat SQL queries.
792 kes Add David's notes on Item 8: Copy pools.
794 kes Rework projects file to be current and ready for a vote.
795 kes Enhance lex scanner error message.
797 kes Tweak LICENSE file to mention BSD code.
798 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
799 if specified on the ./configure.
800 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
801 This class is intended to allow us to open a second bsock to the
802 Director while in the restore subdialog.
804 kes Fix configure to create bat Makefile before creating dependencies.
805 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
806 kes Add a tooltip to the tray monitor.
807 dvl Set the Director's PID file before dropping privs. This fixes
810 kes Update AUTHORs file
811 kes Increase the default max concurrent jobs to 20 in FD and SD to
812 correspond with the default .conf files.
813 kes Rewrite the Win32 service routines. This eliminates the 3 copies
814 some different, of the same file created by RN when porting the
816 kes Rearrange some of the Win32 directories and the placement of the files
818 kes Set DEVELOPER flag in version.h
820 ========================================================================
821 Release Version 2.2.0
823 kes Apply a second doc patch from Marc.
824 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
825 improves the tips section that discusses how to setup multiple
828 kes Update bat README file.
829 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
830 corrects a typo in the Recycle status check in db_find_next_volume().
831 This will probably fix a number of annoying problems with multiple
833 kes Modify most of dird/msgchan.c to use bsock class calls rather than
834 bnet calls -- no functionality change.
836 kes Modify the Verify output to specify if files are missing on
837 the Volume(s) or disk. Fixes confusion in bug #916.
838 kes When more than one Volume is read in a migration job, the last
839 Volume bytes reported are from the last read volume rather than
840 the last written volume. Fixed. This fixes bug #910.
841 kes Fix display of Recycle flag after update volume=foo recycle=yes.
842 It previously printed New Recyle flag is: no. This fixes bug
845 kes Correct seg fault when switching tape drives during restore.
846 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
847 be used until after 2.2.0 release.
849 kes Remove fnmatch() in SD that permitted wild card specifications.
852 kes Fix %g in filename returned by SQL for browse tree reported by
854 kes Fix configure so that it puts config.out in the cwd rather than
856 kes Attempt to fix the locking problem reported by Eric in bug #906.
857 kes Make berrno class to leave errno unchanged after constructor call.
858 kes Make bnet_server use the heap rather than the stack to allocate
859 its socket fd pointers to avoid a crash at termination. Problem
860 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
862 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
863 and putting it in depkgs-qt along with Qt4.3.
865 kes Rework code in acquire.c that switches drives for reading when
866 the Media Type does not match. This should fix bug #906
868 ebl Fix a director segfault during job setup #907
869 kes Correct seg fault in postgresql when first operation returns no
870 rows. Fixes Dirks File browser problem seg fault with bat.
872 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
873 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
876 kes Implement PopUp YES/NO dialog for bat.
878 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
880 kes Correct RunScript to terminate job in FD on failure.
881 kes Change abort_on_error and AbortJobOnError to fail_on_error
882 and FailJobOnError in RunScripts.
883 kes Minor tweaks of code formating in RunScripts, principally to
884 avoid depassing 80 columns.
886 kes Eliminate one #ifdef Win32 in bsmtp
887 kes Implement grow tool to grow a file for testing very large databases.
888 kes Add big-vol-test to test Bacula seeking with > 5GB.
891 kes Modify find_next_volume() to return all values in Media record.
892 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
896 kes Update Release notes
898 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
899 Warning, in previous beta version, all media get from scratch keep their
902 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
903 This should fix bug #842. Made a note to look at removing the temp
904 files at the end of the install.
905 kes Add ability to mount and unmount a file device providing it is
906 marked as being removable and has the appropriate mount and unmount
907 commands defined in the Device resource. This fixes bug #830.
908 kes When applying a storage override, release all previous storage
909 definitions rather than just prepending the new storage.
910 This should prevent a good deal of confusion.
912 kes Implement ./configure search for qwt libraries.
914 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
915 Win32 FD. This should fix bug #893.
916 kes Remove an unnecessary beep in Win32 init code.
917 kes Update copyright dates in Win32 executable about boxes.
918 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
919 code with a BSD getopt.c and getopt.h.
920 kes Remove sched.h from the Win32 compat directory -- not used.
921 kes Remove the Exit menu item from the Win32 tray monitor. If you really
922 need to shut it down, do it through the services panel or the command
924 kes Remove some inappropriate Bacula FSFE copyrights.
925 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
926 kes Fix regress config non-portable test as pointed out by
927 Florian Heigl <florian.heigl@gmail.com>
928 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
929 as pointed out by Florian Heigl <florian.heigl@gmail.com>
931 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
932 Reported by Frank Sweetser.
936 kes Fix client-only build.
937 kes Integrate client-only fixes for bsys (initgroups) and conio from
938 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
939 kes Make arguments to get_scratch_volume() in same order as other
941 kes Rework the prune_volumes() subroutine so that after purging and
942 no volume found in desired pool, it will check for a scratch
943 volume. This prevents recycling the whole scratch pool.
944 kes Add code to status storage to print boffset_t (largefile support).
946 kes Move qwt (Graphics libarary for Qt4) to depkgs.
947 kes You now need a --with-qwt=<dir> to be able to build bat.
948 kes Update src/win32/cats/bacula_cats.def to include the new
949 db_get_query_dbids() call on Win32.
951 kes Correct a problem when selecting a scratch volume and moving
952 it to another pool that lost some columns.
953 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
954 kes Enhance Autochanger error messages to include Volume and device name.
955 kes Rework prune_volumes() code to take account of InChanger flag,
956 and to handle recycling volumes going to the Scratch pool and
957 current pool because the RecyclePool directive.
958 kes Implement a better and more efficient db_get_query_dbids() to
959 handle creating and passing back a list of DBIds.
963 kes Start work on new more efficient DBId subroutine. First use
964 will be for recycling volume to Scratch inchanger.
965 kes Increase number of JobIds in pruning from 1000 to 10000.
966 This to be replaced by above routine.
967 kes Begin implementation of building Qt4 on Win32.
968 kes Correct typo in fix I added for bad TLS shutdown.
969 kes Pull 2.0.3 patches into patches directory.
970 kes Update Release notes. Include qt-console in line count.
971 kes Update Projects file.
973 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
974 bug in migration code where a job that spanned two volumes
977 kes Implement new BST_DESPOOLING blocked state. Change from locking
978 during despooling in SD to blocking. This means that other threads
979 can work with the device structure, in particular the reservations
980 system while despooling.
982 kes Fix return in reservation message queue that missed clearing
983 the jcr lock (implemented 26Jun07 below).
984 kes Rename a number of dev methods to make locking function names
986 kes Document locking in lock.c. Move lock structures to new file
989 kes Move reservations message lock to lock jcr only this
991 kes Move main SD locking code into lock.c (new file).
992 kes Update Win32 build to include lock.c
996 kes Dirk committed the qwt library code for drawing graphs in bat.
997 kes Tweak install of qwt so that it is integrated with ./configure.
999 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1000 out by Eric (my typo).
1001 ebl Fix configure.in to get batch mode enable
1002 kes Return correct string from authenticate.cpp in bat when connecting
1004 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1005 spurious line drops when using TLS.
1006 kes Do not file reparse points when restoring a file that already
1009 kes Implement Windows reparse points -- similar to directories, but
1010 we do not descend into it. This is a first cut. They seem to
1011 be backed up, but restore is not yet tested.
1012 kes Remove restore_blocking in tls code when shutting a socket to leave
1013 it in blocking mode. Hopefully this will fix the encryption bug
1014 reported by Frank Sweetser.
1015 kes When opening a file for backup, tell the OS that we are going to
1016 read it sequentially -- optimization.
1017 kes Change variable names in authenticate_director() to not conflict
1018 with member names in bat. Caused great confusion with compiler,
1021 kes Queue openssl error messages in case of comm problem.
1022 kes Do shutdown() call if socket terminated.
1023 kes Remove some duplicated code in tls.c
1024 kes Move more of the bsock member variables into private and access
1026 kes Add Frank Sweetser's tls-test to the regression suite.
1028 kes Add Swedish sv.po file
1030 kes Don't print clock skew message in FD if less than 3 seconds diff.
1031 kes Add a bit of VSS info to status client.
1032 kes Implement a first cut of Vista VSS, using Win2003 code.
1034 Release: 2.1.20 beta
1036 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1037 loaded tape but uses first drive).
1038 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1039 This was indeed a Win32 issue.
1041 kes Simplify search of autochanger for in-use Volume.
1042 kes Fix exit condition of check for in-use volume. kes Remove
1043 inappropriate my_postgresql_free_result() in db_close()
1045 kes Fix bad return in FD when encryption signature not found.
1046 Probably caused a crash.
1047 kes Inhibit missing encryption signature error messages for
1048 file types where no signature computed.
1049 kes Correct inverted check on autochanger in reservation system.
1050 kes Tweak debug code in autochanger reservation.
1052 kes Add some additional locking in the cats directory in subroutines
1053 that modify packet variables called from batch insert.
1054 kes Rework how dcrs are allocated. new_dcr() can now be called
1055 with an existing pointer, and it will simply clean it up.
1056 This allows the reservation system to test various different
1057 devices, and will permit easy device changes.
1058 kes A bunch of changes all over to handle new new_dcr() calling
1060 kes Work more on the Volume management in the SD. Remember Volumes
1061 for tape drives and for autochangers (even virtual disk changers).
1062 kes When looking at the Volume list to reserve a drive, handle
1063 autochanger names correctly by interating through the changer
1064 devices. Also call the Director to see if a Volume is suitable
1065 for the current job.
1066 kes Fix some bugs in bscan. Make sure all media records are written.
1067 Make sure that valid JobMedia records are written for disk files.
1068 Previously they were completely wrong.
1069 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1070 that the URLs don't change and so that the developers will all
1071 work off the same copy. Rebuild from scrach.
1072 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1074 Release: 2.1.18 beta
1076 kes Fix seg fault in FD from incorrect digest size.
1077 kes Fix argument to non-OpenSSL crypto.c subroutine.
1079 Release: 2.1.16 beta
1081 kes Remove a few malloc()s from the encryption code.
1082 kes Use the class calls to bsock in filed/backup.c and restore.c in
1083 place of the old bnet_xxx code.
1084 kes Implement code that does an on the fly calculation of the
1085 signing digest during restore of encrypted files. It makes
1086 a best guess at the algorithm, and if it is not correct, will
1087 then revert to the old code which reads the file after it is
1089 kes Implement at least one missing crypto stream in stream_to_ascii()
1090 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1091 #877 where a reload with bad syntax causes Dir to exit.
1093 Cut: 2.1.14 beta (not released)
1095 kes Do not free a volume on a tape drive until another volume is
1096 mounted and read, or the autochanger unloads the volume.
1097 This should help the SD re-use volumes that are already mounted,
1098 and should fix bug #886.
1099 kes Apply patch from user brettedgar that allows gnome2-console include
1100 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1101 kes Apply patch from Lucien Weller that fixes day of week calculation
1102 because of DST flag problem. Fixes bug #887.
1104 kes Move find_next_appendable_volume() to after acquiring a valid device
1105 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1107 kes Unable to reproduce bug 872. However added additional testing for
1109 kes Bug #874 resolved by documenting SQLite limitations.
1110 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1111 kes Bug #881 resolved by removing typo in mtx-changer script.
1112 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1113 approval. Added a link to the wiki on the web page, and implemented
1114 a backup from http://paramount.ind.wpi.edu
1116 kes Fix update allfrompool to pass pool name.
1118 kes Convert to pure GPL v2 license.
1119 kes Fix sscanf problems reported by Peter Buschman that caused
1120 a bus error on Solaris.
1121 kes Rework (simplify) the select prompt in bat.
1122 kes Move get_jobid_from_tid() into lib and create a
1124 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1125 should definitely fix the problem of lost error messages in the
1127 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1128 kes Eliminate tcpd.h from the project. Enclose the #include from the
1129 library with extern C ...
1130 kes Add print of signal name when a signal is trapped.
1132 Release: 2.1.12 beta
1134 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1136 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1137 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1138 makes SQLit3 run 30 times faster, though a bit less safe.
1139 kes Implement --with-batch-insert in configure and detection of thread
1140 safe libraries. It is on by default, but turned off if no thread
1141 safe library (e.g. SQLite 2) is available.
1143 kes Fix Bacula PostgreSQL buffer overruns.
1144 kes Do better checking for NULL results returned from PostgreSQL;
1145 implement retry for failed queries; clear results buffer after
1146 failed query. Hopefully this will correct the PostgreSQL failures.
1148 kes Implement algorithm to handle only one appendable volume with
1149 Prefer Mounted Volumes = no.
1150 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1151 returned from a query.
1152 kes Make volume lock recursive.
1153 kes Implement an additional volume reservation algorithm that
1154 starts by considering all reserved volumes then uses the
1155 old brute force algorithm of searching the resources to
1156 find a suitable device.
1157 kes Add new reservations debug code and refine the old code.
1158 kes Update the win32/dll/bacula.defs file.
1160 kes Tweak reservations algorithm to permit a few more cases, i.e.
1161 volume reserved, but on different drive, ...
1162 kes Enhance SD status to include Pool and Media Type for drive in a
1163 more readable format (a bit longer).
1164 kes Fix PostgreSQL double free.
1166 kes Minor refactoring of restore decryption code.
1167 kes Add code to smartall.c to detect double free of a buffer.
1169 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1170 so that bsmtp will create a correct email address (mailbox only).
1171 kes Modify 'memory' command so that the buffers are listed as 'In use'
1172 to avoid confusion with Orphaned buffers.
1173 kes I reworked the OpenSSL include/lib flags to be handled in
1174 the standard Bacula way, which should fix bug #863 concerning
1175 non-standard OpenSSL libraries.
1177 kes Implement Help Browser window for bat.
1178 kes Fix reload bug that reset StorageId to zero.
1180 kes Fix TLS #ifdefing when TLS turned off.
1181 kes Ensure that when labelling a tape with Slot=0 that InChanger
1183 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1185 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1186 add DISTINCT (required by PostgreSQL).
1187 kes Implement BSOCK authenticate_director() method. Eventually will
1188 authenicate all daemons.
1189 kes Move several more functions into the BSOCK class.
1191 kes Add code to tell the OS that we no longer need a cached
1192 file that we were reading. In findlib/bfile.c. Also,
1193 only cache files that we are reading. Thanks to
1194 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1195 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1196 kes Implement script to automatically generate cats and dll .def
1197 files for Win32 dll.
1198 kes Update README.mingw32 to include new .def file generation.
1199 kes Correct typo in UTF-8 error message as reported by:
1200 jhernandez <julianhernandez@gmail.com>
1201 kes Add additional sm_check() code on debug level 1.
1202 kes Set default debug level to 1.
1203 kes Trap SIGABRT in attempt to get traceback.
1205 kes Reduce bat connect timeout from 30 to 15 seconds.
1206 kes More restructuring and implementing BSOCK class in place of
1208 kes Remove a few unnecessary malloc() tests in crypto code.
1209 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1210 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1211 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1213 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1215 kes Fix Verify InitCatalog. The attributes were not pointing to the
1216 correct saved location.
1217 kes Implement message callback so that GUI is sure to get all
1218 daemon messages. Currently displayed in a dialog in bat.
1219 kes Ignore SIGUSR2 (Bacula timer) in bat.
1220 kes Apply regress patch from bug #859 to allow regress to work
1221 with Solaris compiler.
1223 kes Begin adding TLS support to bat.
1224 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1225 clean up lex.c and make it more readable.
1227 kes Move more bnet functions into the BSOCK class.
1228 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1229 kes Complete change of berrno strerror() method to bstrerror()
1231 Release: 2.1.10 beta
1233 kes Cleanup incorrect email addresses in bsmtp.
1234 kes Make bat display initial messages rather than discard them.
1236 kes First cut of adding .mod to the run command.
1237 kes Implement auto display of messages in bat.
1238 kes Enhanced preferences to allow all Bacula output to be
1241 kes Try to make bsmtp date routines more generic.
1242 kes Fixed bug #856 autochanger documentation.
1243 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1244 kes Add new cats entry point so Win32 builds.
1246 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1248 kes Do better checking for the MySQL 64 bit libraries looking for both
1249 .a and .so libraries.
1250 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1251 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1252 kes Require the thread safe version of MySQL during configure. Thanks
1253 to Andre Noll for pointing this out.
1254 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1255 continuing in migration code.
1256 kes Apply implementation of tray-monitor font derived from gnome-console
1257 submitted by Andreas Piesk <a.piesk@gmx.net>
1259 kes Eliminate important memory loss in SQLite
1260 kes Fixed the batch insert MySQL thread specific data that was not
1261 being freed. See cats/mysql.c:db_thread_cleanup().
1262 kes Fix restore before command.
1263 kes Convert old hdr.name to name() in a few places.
1264 kes Implement update jobid command.
1265 kes Return all time_t dates in db_get_job_record()
1266 kes Stop watchdog in SD earlier.
1267 kes Put Pool just after Storage in please mount message.
1268 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1271 kes Update the po files.
1272 kes Fix Verify InitCatalog by making it cache attributes.
1274 kes Change name bacula-bat to bat for man 1 page to correspond to
1276 kes Check for client and store NULL pointers in status command. This
1278 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1279 kes Fix sign extended editing of %p.
1280 kes Clean out a little old #ifdefing in cats/mysql.c
1282 kes If time diff between DIR and FD is more than 600 seconds convert
1283 INFO message to WARNING.
1284 kes Implement heap size display in status for all daemons.
1285 kes Attempt to fix MySQL db open memory loss (not successfull).
1286 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1287 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1288 Query. This looks like a MySQL but but by doing extra releases,
1289 the memory goes away. This should fix bug #847.
1291 kes When backup fails, cancel SD before waiting for sd termination.
1292 kes If SD is waiting for FD to connect during cancel, wake up the
1294 kes Fix fsf code so that errno is correctly reported.
1295 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1297 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1298 so that Bacula doesn't later stumble into a seg fault.
1299 kes Use the term Restore Client in the restore Job report.
1300 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1301 the original job's FileSetId.
1302 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1303 spooling in migration jobs. Not yet tested.
1304 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1305 reading conf file from a pipe. However, do it with open_bpipe()
1306 rather than popen. Not yet tested.
1308 kes Fix an ugly bug where the VolCatBytes were getting updated
1310 kes Implement bconsole memory command that prints current memory
1311 usage, plus smartalloc dump.
1312 kes Clarify some error messages in backup, admin, and migrate.
1313 kes Shrink label dialog to smaller size.
1314 kes Invert Cancel OK buttons on restore to be OK Cancel.
1315 kes More strerror() to bstrerror() conversions.
1317 kes Start implementing bstrerror() in place of strerror().
1318 kes Stripping path -- seems to work.
1320 kes Prevent door and port files from being restored (mostly
1322 kes Free an unreleased buffer in compat code.
1323 kes Change console Job name from *Console* to -Console- to eliminate
1324 Win32 filename problems. Put Win32 path separator when creating
1325 Console file. This fixes bug #846.
1326 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1328 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1330 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1331 to force Win32 error message.
1333 kes First cut strip path. The data should be passed to the FD,
1334 but nothing is done with it yet.
1335 kes Enhance the digest and signature routines in the crypto
1336 library to accept a JCR and to use it to print error messages
1337 so that they will go in the Job report rather than the daemon's
1339 kes Simplify some of the verify signature code.
1340 kes Simplify a few of the alternative returns in the signature
1343 ebl Use only POSIX regex instead of GNU regex in breg.c for
1344 File relocation. It fix broken freebsd compilation.
1345 kes Convert all other Dir files to use new ua class message
1347 kes Tentative fix for missing digest signature in bug 807.
1348 kes Correct handle problem in new win32_ftruncate routine.
1349 kes Convert ua_purge.c and ua_update.c to use new ua class
1350 message routines for bat.
1352 kes Correct incorrect installation of LICENSE in Win32 installer.
1353 kes Display LICENSE at the beginning of the Win32 install.
1354 kes Attempt to correct the need for the png files to be installed
1356 kes Reapply my bat.conf install script in qt-console. I think I
1357 editted bat.pro instead of bat.pro.in and it was lost.
1358 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1359 the /var/lock/subsys for subsysdir. Also corrects typos in the
1362 kes First cut update job.
1363 kes Correct configure to include qmake of src/qt-console directory.
1365 kes Make restore job yes/mod/no print in one command so GUI works.
1366 kes First cut implementing backup and restore client.
1367 kes Correct editing in Verify output that caused a seg fault.
1369 kes Insure that bat.conf is not overwritten during installation.
1370 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1371 while I was implementing migration in March 2006 !
1373 ebl Cleanup file relocation, using char *RegexWhere instead of
1374 char *where + bool where_use_regexp
1375 kes Update some manpages and add bat manpage.
1376 kes Make a first cut at converting bacula.spec.in for bwx-console
1378 kes Apply patch from John Goerzen to add hostname as fourth argument
1379 to make_catalog_backup script.
1380 kes Fix typos I introduced into bsmtp.c
1381 kes Make pm_strxxx() routines handle input of NULL pointer. This
1382 is to protect from NULL pointers returned from SQL databases.
1383 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1384 kes Add more debug to FIFO code -- fix fifo regression test.
1386 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1387 kes Add thread timer to bnet_connect() to break from OS if wait time
1390 kes Update Win32 build to include new files, new symbols, and
1392 kes Implement socket level heartbeat (tcp_keepidle)
1393 ebl Commit File relocation patch
1394 kes Make bat have 'make install' target.
1395 kes Warn during install if old gnome-console binary found.
1396 kes Warn during install if old wx-console binary found.
1397 kes Add -8 option to bsmtp command line to add content type utf-8.
1398 Fixes bug #809. (Character coding problem in bsmtp).
1399 kes If < is found in target (from, to, cc) then do not enclose the
1400 target in < > in bsmtp. Fixes bug #772 (malformed address).
1401 kes When printing certain items in dbcheck, stop after 300000.
1402 Fixes bug #822. (dbcheck loops).
1403 kes Incorrect status in Dir after waiting for mount with poll set.
1406 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1408 kes Print waiting to reserve a device every 5 mins.
1410 kes Don't call close_part in label.c if tape and relabel.
1411 kes Don't free volume if busy in close() -- should help with
1413 ebl Fix #824 RunScript bug (After script could be execute twice)
1414 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1415 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1416 Add a regression script to test RunScript
1418 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1421 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1422 deprecated. No additional bugs will be fixed, and they will be dropped
1423 in a future release (probably 2.4.0).
1424 kes Change name of wx-console to bwx-console to make it more Bacula
1426 kes Change the name of gnome-console to bgnome-console to make it
1429 kes Some time in March, a Feature Request with patch from Jorj Bauer
1430 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1432 The ability for the director to validate a Client (FD) CN against
1433 an arbitrary set of patterns rather than the hostname, with
1434 A new 'TLS Allowed CN' set of directives which are implemented
1435 in the Client resource. Then pattern matching is used in place
1436 of hostname matching against the Certificate's CN. As an example, we
1437 have certificates which (a) use a local CA, and (b) have a CN of the
1439 kes Add new/changed entry points to Win32 build
1440 kes Create unaccepted-projects for projects that are not accepted.
1441 kes Simplify locking in the reservations system.
1442 kes Add more debug code in reservations.
1443 kes Make sure error condition on reserving a volume is handled correctly.
1444 kes Correct handling of volume_in_use.
1445 kes Correct handling of initializing a device.
1446 kes Move handling of broadcasting releasing a device into release_device().
1447 kes Correct attaching dcr to dev so that it is only done if device
1448 is properly initiated.
1450 kes Locking debug level tweaks in SD.
1451 kes Tweak new Volume code.
1453 kes Add exec external-command [wait-seconds] to bconsole. This
1454 executes the external-command. Note! normally external-command
1455 should be enclosed in double quotes.
1456 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1457 it should normally be off in a production system.
1459 kes Implement die command for SD so that we can force it to dump.
1460 kes Implement SD lock debug code.
1461 kes Implement new algorithm for keeping Volume list in SD. It
1462 is now owned by the device.
1464 kes Implement new code for freeing in use volumes that should
1465 resolve if not all, some of the problems of multiple drive
1466 tape conflicts described in bug 801.
1468 kes Fix gui/bacula-web/images files in svn.
1469 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1471 ebl Fix a bug in batch mode (in string escape)
1472 kes Correct migration prune SQL typo that crept in in a
1473 recent 2.1.x change.
1475 kes Move bnet_despool() into class in bsock.c
1476 kes Modify job report to include director name and Build OS.
1477 kes Move drop root privilege and check_catalog() before fork.
1478 kes Add update database scripts (version 9 to 10) to updatedb directory.
1480 ebl Check size and age of each file after its backup to see if
1481 it has changed during backup, if 'checkfilechanges' is set.
1482 The FD will do an extra check (stat(2)) after
1483 each file backup. mtime, ctime and size are compared with
1484 'before backup' information. If time or size mismatch, an
1485 error message will be generated. You must upgrade FD to use it.
1487 kes Make database name and user configurable
1488 --with-db-name=xxx --with-db-user=xxx
1489 kes Add back database type to message.c for debugging.
1491 kes Implement dir_sql() which issues an SQL query.
1492 kes Modify bat medialist to use dir_sql() and do some minor C++
1493 formatting as well as eliminating a number of pointers, simplifing
1496 kes Fix some of the mtx-changer grep commands for tape label readers.
1497 kes Convert a number of bsendmsg into the appropriate send/warning/error
1498 message class calls.
1499 kes Suppress the using database message in the .sql command.
1500 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1502 kes Add context menu for floating a window.
1503 kes Some minor cleanup and name changes in qt-console
1504 kes Add doing mt setblk 0 in Win32 mtx-changer.
1505 kes Apply Martin's bug fix to move definition of ENODATA for
1507 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1508 sqlite2 and sqlite3.
1510 kes More pruning cleanup.
1511 kes Turn on wait_for_drive by default in mtx-changer.
1512 kes Turn on Batch insert code by default as it now passes regression.
1513 kes Add ./configure --enable-bat to enable building of Bat.
1514 No install yet though.
1516 kes Implement a new .sql command for bat.
1517 kes Implement code to turn off pruning in obtaining the next volume.
1518 Pruning is turned off for the status dir command, but turned on
1519 for SD requests and for the list nextvolume command.
1521 kes Correct Qmsg() that was not updated correctly when committing a
1522 previous change (probably the recent TLS patch).
1524 kes Write new subroutine is_volume_purged() that explicitly checks
1525 if the Volume is purged, and if so marks it as such. This should
1526 resolve problems reported about needing to mount twice to recycle
1528 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1529 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1530 amount of duplicated code.
1531 kes Do volume pruning only for the Media Type desired (reduces pruning time
1532 if multiple Media Types are in the same pool).
1533 kes Implement more detailed info in the Job report for the Bacula version
1535 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1537 ebl Add bbatch tool to bench database and insert mode.
1538 Fix sql quote stuff in batch mode
1539 Fix sql stuff for mysql
1541 kes Correct problems with am/pm scheduling. Fixes bug #808.
1542 kes Implement new prunning code that prunes up to 1000 jobs at
1543 the same time. The same technique can be applied to a number
1544 of other prune/purge subroutines.
1545 kes Add an insanity check when starting a new tape job to ensure
1546 that the tape position has not been changed. If so fail the
1548 kes Fix Win32 build for dlls to add the folllowing:
1549 src/lib/bsock.c -- new file with new entry points
1550 src/lib/dlist.c -- new entry points
1551 src/cats/sql_create.c -- new entry point
1552 src/cats/sql_cmds.c -- new DATA item exported
1554 ebl batch mode cleanup bscan-test is ok now.
1555 kes Implement SD code to check length of disk volume before appending.
1557 kes Correct return status on db_batch... routines.
1558 kes Add call to db_write_batch_file_records() to migration code.
1559 ebl Fix AfterJob timing
1560 kes Move the checking of the database in initializion of the Director
1561 to after we drop privileges. This avoids the need for both root
1562 and bacula access to the DB.
1563 kes Correct a misplaced variable definition in src/filed/backup.c
1564 kes Correct how the new batch insert db_create_attributes_record()
1565 uses the arguments. Caused a seg fault in bscan.
1566 kes Implement lock() and unlock() methods in DEVICE class.
1567 Implement block() and set_block(xx) methods in DEVICE class.
1568 kes Modify bnet_connect() so that it uses time() to check for the
1569 wait time expiring (on some OSes, some system calls may not
1570 return immediately).
1571 kes Modify Verify to obtain the previous JobId when it is actually
1572 running rather than at schedule time (as it was in 1.38.x).
1573 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1575 kes When checking pid in pid file, continue running if the pid is
1576 the same as ours. This occurs on IRIX after a system crash.
1579 kes Extend new GUI API.
1580 kes Make the ua structure a class, and implement send_msg(),
1581 error_msg(), warning_msg(), and info_msg().
1583 kes Apply fix from for building wx-console on the Mac from
1585 kes Implement new select mechanism for GUI programs.
1586 kes Reorganize initialization of stackedWidgets in bat.
1588 kes Add updated nagios plugin supplied by Christian Masopust.
1590 kes More bat implementation.
1591 kes File migrate bug with Pool Occupancy using mediaid instead
1592 of jobids. Fixes bug #795.
1593 kes Fix orphaned buffers in filed backup and verify due to
1594 crypto buffers not freed during errors. Fixes bug #789.
1595 kes Extend new GUI api code to tree commands.
1596 kes Ensure that tree and dot commands check console ACLs.
1597 kes Permit marking directory with trailing slash.
1598 kes Allow 20 console connections (instead of only 10).
1600 kes Add smartctl call to bacula-sd.conf as an example of getting
1603 kes Modify jobq.c to let simultaneous restore jobs run. This may
1604 cause them to fail if they cannot get a drive.
1605 kes Add Client Connect Wait to Storage daemon to permit users to
1606 modify the time the SD waits for a FD connection.
1608 kes Correct virtual changer check which was backwards. This caused
1609 volumes to be unloaded into slots already occupied.
1611 kes Apply Command ACL filter to JobId list in restore command.
1612 kes Correct typeo in var.c patch.
1614 kes Don't let Bacula prune File or Job records for the current Job.
1615 kes Fix variable substitution pad + inc bug reported (with patch)
1618 kes Correct SQLite log table index as reported by Luca Berra.
1620 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1622 kes Begin implementing new comm signals for API.
1623 kes Fix a few places in lib/message.c where the open fd may
1625 kes Continue implementing lib/bsock.c (real class). Make jcr,
1626 who, host, and port private. There are new methods to access
1627 them for non-class use. This required touching a number of files.
1629 kes Add LANG=C to autoconf/randpass so it works with languages other
1630 than English. Fixes bug #788.
1632 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1634 You will not be able to generate Include/Exclude list any more.
1635 It will be fixed soon.
1636 If you want to use this, you can apply
1637 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1639 kes Restore of sockets created false error messages because Bacula
1640 no longer restores sockets, but the code was still trying to
1641 set the attributes on a non-existent file. Reported by a user.
1642 ebl finish RecyclePool feature
1643 Media will takes Pool.RecyclePool
1644 when moving from Scratch to a Pool or when user will do
1645 update volume=xxx frompool
1646 To use it, add RecyclePool = aPool to your Pool resource
1649 RecyclePool = Scratch
1653 kes Expand new BSOCK class adding signal() and new BNET signals.
1654 kes Begin enhancing the dot commands adding a new API function
1655 that returns more information and will make it easier
1656 to interface to the Director from a program.
1658 kes Make DEVICE fd private. Its new name is m_fd, and can be
1659 obtained with dev->fd() outside the class. This is the
1660 first of many DEVICE members to be made private.
1661 kes Implement Michael Renner's idea on having a virtual disk
1662 changer. I made some minor modifications (e.g. I did not
1663 implement the Virtual Changer directive, but simply set
1664 the Changer Command to an empty string.
1666 kes Implement a BSOCK send() method that writes the whole record
1667 in a single write() request rather than in two.
1668 ebl add update volume=xxx recyclepool=yyyy
1669 volume takes recyclepool from pool when using update volume=xxx from pool
1671 kes Fix encryption deblocking bug, which caused some restored files
1672 to be truncated. This fixes bug #763.
1673 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1674 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1676 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1677 ebl Use btime_t instead of uint64_t in media patch.
1679 kes Optimize the use of the database a bit in the Status dir command.
1680 Only open it when needed, ensure that if any previous database
1681 was opened, it is closed.
1683 kes Correct VolCatBytes bug from media patch.
1684 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1685 in the case of orphaned records.
1686 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1687 and File records in 300K chunks to be more efficient. This
1688 idea came from Juan Luis Frances (if I remember right).
1689 kes Apply Eric's scratch patch that moves a purged Volume to
1690 the RecyclePool. Question: how is RecyclePool set? what
1691 happens to the ScratchPool?
1692 kes Apply Eric's media patch that collects read/write media
1693 times as well as byte counts. This patch requires a
1694 simultaneous upgrade of the DIR and SD. Note, there
1695 should be some way to turn off timing. I'm not sure
1696 times are in Bacula units.
1697 kes Apply Eric's batch-insert patch.
1699 kes Update projects list.
1701 kes Implement Include/Exclude file lists in FD as dlists using
1702 the new dlistString class. This permits efficiently having
1703 large include/exclude lists and completes project Item 25.
1704 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1705 console is authorized to cancel the job. This fixes bug
1707 kes Modify SD so that the VolCatJobs medium record is updated
1708 at the beginning of a Job rather than the end. This
1709 fixes bug #775 where exceeding MaxVolJobs caused jobs
1711 kes Added a mutex around getting and setting Volume information
1712 so that multiple simultaneous jobs will single thread.
1714 Switch to using Subversion
1715 kes Remove src/pygtk-console/ from configure
1717 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1718 plus the entrypoints.
1719 kes Apply patch supplied that corrects debug print
1720 in canceling jobs for max run time. Supplied as
1721 part of bug #621, which was previously fixed.
1723 kes Test on job_canceled() and sd_msg_thread_done inside
1724 loop starting the message thread to avoid a race condition.
1726 kes Remove rl_catch_signal from console.c as it conflicted
1727 with the header definition. Fixes bug #765.
1728 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1730 kes Clarify some stored/acquire messages to indicate if the
1731 problem is with read or append.
1733 kes Fix memory leak with storage ids in cats/sql_get.c
1734 kes Terminate watchdog earlier to avoid reference to released
1735 memory -- reported by Jason Austin.
1736 kes Move closing the database from jobq.c to the director daemon
1737 termination routine. This fixes memory leaks for shadow jobs
1738 (i.e. migration jobs).
1739 kes Free up the unique jobid chain items in migrate.c. This fixes
1740 a memory leak problem.
1741 kes Convert some ugly looking for statements to use foreach_alist
1742 in findlib/find.c. This will facilitate converting the structures
1743 to use dlist (for large include/exclude lists).
1744 kes Fix a bug in the btree.c and btree.h routines, then rename them
1745 rblist and add them to be built in src/lib. Include some new
1746 methods written by Rudolf Cejka that make the code more readable
1747 (hides some of the ugly casting).
1748 kes Add set_next() and set_prev() methods which make the code much more
1749 readable. Also add a new dlistString class that facilitates storing
1750 strings in dlists. To be used in the large include/exclude lists.
1751 kes Make some trivial modifications to lib/tree.h that use rblist
1752 rather than dlist for storing the tree links. This was suggested
1753 by Rudolf Cejka. The result of this is that the restore tree now
1754 uses red-black binary trees rather than simple linked lists. This
1755 should give rather dramatic speed improvements for directories
1756 contining large numbers of directories/files (more than 10000).
1758 kes Fix maxruntime bug #621.
1760 ebl Implement the include JobID in spool file name project.
1761 kes Reorder projects file in order determined by Jan 2007 vote.
1762 kes Implement item #12 on project list -- quick release of FD by
1764 kes Fix open of SQLite3 db where user does not have write permission
1765 so that DIR does not crash. Fixes bug #761.
1767 kes Add back missing @ in Win32 Makefile.
1768 kes Change 'Device not configured to autolabel' from INFO
1770 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1771 which should restart an indefinite # of times.
1772 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1773 other DIR specifications.
1775 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1776 Fix path quoting in SQLite scripts.
1777 Fix problems with SHGetFolderPath.
1779 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1781 kes Fix Job restart on error bug that promotes an Inc to a Full
1782 backup. This should fix bug #755.
1783 kes Add qt-console and first cut of code.
1787 kes Fix Bacula->Documentation link on Win32 to point to index.html
1788 instead of bacula.html. Fixed bug #750.
1789 kes Return JobId in db_get_job_record() when JobId==0. This should
1791 kes Do not release source pointers when restarting a failed job.
1793 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1794 This *should* fix bug #747.
1795 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1798 kes Modify USTORE constructor to set an empty store_source string,
1799 and don't copy the store_source string in a cancel. Hopefully
1800 this will fix Arno's seg fault, bug #744.
1801 kes Add back code to disable conio in configure. Fixes bug #743.
1802 kes Correct the Options scanner in the FD to correctly handle
1803 SHA1 option, which was eating the next option. Reported by
1805 kes Add code to indicate when the SD is spooling, spool wait, and
1806 despooling as requested by Alan Brown.
1808 Version 2.0.0 released: 4 January 2007