1 Technical notes on version 2.3
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
20 Improved status commands for Bat
21 Spooling/despooling status
22 Implement ftruncate for NFS devices
23 Add long term statistics job table
28 kes Separate unload_dev() from unload_other_device() in autochanger.c
30 kes Apply patch from bug #1069 that corrects spurious error messages
31 when ACLs enabled on SGI but no ACL exists.
32 ebl Fix small segfault in bacula-sd when debug level is 500
33 kes Modify run_program() and run_program_full_output() to use
34 call by reference for the results string. This corrects a long
35 standing problem where the address of the string may be changed
36 in the subroutine but not in the calling program.
38 kes Re-enable code to remember last volume mounted on a non-tape
40 kes Add patch supplied in bug #1068 that fixes a SD crash when using
41 a Virtual autochanger.
42 kes Generate correct JobMedia records during spooling/despooling when
43 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
44 <tih@hamartun.priv.no> for excellent analysis and testing.
46 kes Tweak hash algorithm for htable using Martin Simmons idea
47 for doing a circular shift.
48 kes Remember what volume is in VTLs (previously turned off for
50 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
51 pointed out some problems in creating JobMedia records during
52 spooling with concurrent jobs. Fix the problem by updating the
53 start file position before despooling and generate a jobmedia
54 record at the end of despooling.
56 kes Fix handling of JobMedia records during spooling and when a
57 Volume is changed without actually writing data to the Volume.
59 kes Rework certain SD locking based on gdb tracebacks of deadlocks
60 sent by Eric. This code now uses only the volume_lock() rather
61 than the reservations lock when at EOM and acquiring a new
63 kes Ensure only one exit point in several subroutines.
65 kes Implement bsock code to permit locking. Use the new code in Verify
66 in the FD to prevent the heartbeat thread from disrupting the Verify
68 kes Modify SD locking to eliminate locking the reservations system from
69 outside the system. Use the volume lock when getting media data
70 and reserving a new volume at end of media.
71 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
72 when SD starts are not locked into place.
74 kes Fix error compiling runscript code on 64 bit machines.
75 kes Tweak Win32 mount point code.
76 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
77 cleared giving bad file estimate).
78 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
81 kes Keep Schedule run lists in order as suggested by
84 kes Implement autostart scripts for Debian.
85 ebl Implement upgrade catalog scripts.
87 ebl Apply jobstat patch for long term statistics. Have to implement
88 purge stats command and upgrade scripts.
89 kes Fix mtx-changer.in for broken Debian mt program.
91 kes Fix large number of JobMedia records reported by Eric Bollengier.
93 kes Apply doc fix from bug #1062.
94 kes Resolve crash and improper restore wx-console Win32 restore
96 kes Update Win32 wxWidgets to latest version.
97 kes Attempt to do correct handling of Win32 mount points. Should
99 kes Fix Win32 FD backup/restore memory leak due to improper termination
100 of BackupRead/Write. This fixes bug# 1038.
102 ebl Reduce memory usage for accurate backup, working only with ctime
103 and mtime. (not all Lstat field)
104 About 40MB for my linux system (400.000 files)
106 kes Add dcr->reserved_volume flag that allows us to release a volume
107 even if it is not vol->released. This allows maxvol2 to work when
108 Volumes expire and we are already writing to the device (i.e. a
109 volume is pulled out from under us by another job terminating after
110 we reserve the drive).
112 ebl Permit multiple command/console per runscript definition.
113 RunScript { command = /bin/true ; command = /bin/false ... }
114 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
115 (restart an application) just after the VSS snapshot on windows.
116 kes Don't zap dcr values during release_volume() as they might
117 have the next Volume to be mounted.
118 kes Fix AIX prototype.
120 kes Second cut of drive switching during backup.
123 kes Update Win32 version of wxWidgets to most recent version.
124 kes Tweak Copy job details.
125 kes Rework dir_find_next_appendable_volume to make a bit more effort
126 to find a suitable volume before giving up.
128 kes Make ask_sysop_to_create... to return if waken from wait.
129 This helps get out of blocked conditions.
130 kes Experimental implementation of switch_device in reservations.
131 kes Implement FD version to allow easier protocol changes.
132 kes Add Plugin Options string -- not yet passed to FD.
133 kes Implement PluginOptions ACL.
135 kes Attempt to correct problems with restores with autochangers and
136 use counts going negative
137 kes Rework SD status command and implement API for bat. Implements
138 header, runing waitreservation, devices, volumes, spooling,
139 and terminated status keywords.
140 .status storage=xxx <keyword>
141 kes Clarify TLS error message by adding double quotes around name.
142 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
143 kes Pass jcr to tls routines so debug messages can be handled better.
144 kes Rework jobq resource allocation code, and possibly fix a bug
145 that caused reference counts to get out of sync.
147 kes Rename fd/dir plugin to use Bacula standard underscore.
148 kes Plugin work -- bring dir up to fd level.
149 kes Start implementation of VTL code
150 kes Fix Win32 build after adding new cats subroutine.
152 kes First cut at Duplicate Job implementation.
154 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
155 kes Start PluginOptions string, and refactor a bit of ua_run.c
156 ebl Apply Allan patch that permit to reset recyclepool.
158 kes Test patch -- possible fix or improvement for bug #1053
159 kes Refactor FD and SD status commands to permit new API code in
160 SD, and to fix Win32 build.
161 kes Win32 build is now working.
163 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
164 some ideas in patch from Scott Bailey.
165 kes Begin implementation of duplicate Job control.
166 kes Fix some of Win32 build after recent additions.
167 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
168 which causes the FD to detect whether or not the OS has the
169 honor no dump bit (*BSD systems), and if so, to skip backing up
170 any file with this bit set. The feature is enabled by setting
171 'honor no dump flag = yes' in the Options section of a FileSet.
173 kes Correct po warning message with datarootdir
174 kes Implement more code in dird.c to put configuration parsing in
175 a class rather than use globals.
176 kes Restructure SD status command for implementation of bat API
179 kes Suppress incorrect 'Will not descend from x into y' messages.
180 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
181 daemon globals used by parser.
182 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
184 kes Fix free of plugin_list when none exists.
186 ebl Apply accurate project patch.
188 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
189 on non-mempool object)
190 kes First cut of converting FD .status to work with bat API.
192 .status client=XXX header
193 .status client=XXX running
194 .status client=XXX terminated
195 kes Implement first cut of Copy Job.
196 kes Implement Catalog in Pool resource. It overrides catalog specified
197 in the Client resource.
199 kes Apply patch (with some difficulties) from Joao Henrique Freitas
200 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
202 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
203 ftruncate() actually works. In the case of some (cheap) NAS devices,
204 it does not, and so recycling NAS Volumes does not work. The code
205 simply unlink()s the file, then recreates it. This fixes bug #1011.
207 kes First incomplete cut of big malloc blocks for htable.
208 kes Tweak plugin code.
210 kes Plugin debug code + tweak a couple bat dialog layouts
212 kes Fix creating first JobMedia record during Migration to include
213 proper index. This caused slow restores of migrated jobs.
214 kes Temp fix to plugin name file_index.
215 kes Bacula backed up and restored a MySQL database.
217 kes Implement plugin restore.
218 kes Implement parsing of db_driver to give db_type index.
220 kes First cut of plugin restore code.
221 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
222 and do not strip paths on symbolic links.
223 kes Set catalog backup database and user name from values specified on
224 the ./configure line.
225 ebl Fix #1031 about wrong pool source information in job report.
228 kes Remove a redundant jcr argument to find_files, match_files, and
230 kes Implement '.status dir header|scheduled|running|terminated' that
231 prints the requested status section. With the exception of the
232 header, the other reports have fields separated by tabs (\t).
234 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
235 a resource embedded run command to find a since time if no explicit
236 since time was supplied on the command line.
237 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
238 that updates the state file at job termination time in addition to
239 when the daemon terminates.
241 kes First version where a plugin did a backup.
242 bpipe-fd.so created a backup file, wrote a test
243 string to it, and Bacua could restore this fabricated file.
245 kes Implement DB Driver = string for the DBI driver.
246 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
247 kes First cut of code for loading Win32 plugin dlls. Implement
248 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
249 and implement a dlfcn.h file based on opengroup's definitions of
252 kes First cut plugin directives.
254 kes Apply patch from bug #1049 to prevent stripping the path on a
256 kes Attempt to fix bug #1047 where stripping a path corrupts the
257 heap. Waiting for feedback.
258 kes Correct the Mount message not to suggest labeling a new tape
259 when doing a restore. Submitted by email by John Stoffel.
260 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
261 FD by using casting. Reported in bug #1042.
263 kes A bit of crypto cleanup. More later.
265 Release Version 2.2.8
267 kes Apply patch from Martin to correct bug #1040, bscan sets existing
269 kes Fixed important spelling error in doc -- bug #1045.
271 ebl Fix bextract to be able to extract non-portable Win32 data to
273 kes Move initialization of read/write res lock earlier in the code.
274 This fixes the crash with a null conf file. This fixes bug
276 kes Redefine CURES in lib/parse_conf to be URES and move it all
277 into lib/parse_conf.c -- this responds to bug #1042, but does
278 not fix it. The fix is not to compile with FORTIFY_SOURCE.
279 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
280 the trunk SVN. I don't think this was reported as a bug.
282 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
284 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
286 kes Add DataDespooling and DataCommitting status (committing is
287 the last despooling).
288 kes Finish implementation of new reservations code noted below.
290 kes Fix bsnprintf for float point numbers. I broke recently when
291 parameterizing some variables. This fixes bug #1036.
292 kes Undo recent reservations changes ... will apply them later
293 when they work better.
295 ebl Fixes #1034 which cause mysql to hang the connection after 8h
296 ebl Change default statistics target of filename.name and path.path
297 fields for PostgreSQL. This speeds lookup by indexes. Thanks
299 kes A few more tweaks to new reservation code. Make sure to clear
300 vol released flag when retaking volume. When reading label and
301 label is bad mark volume unused. When recycling, mark volume
302 unused so it can be renamed.
304 kes Fix reserve_volume() so it doesn't release a volume in use
305 (i.e. a volume entry not marked released). This should be
306 the last part needed to fix bug #1018.
308 kes Move Heartbeat documentation from Job to Director resource.
309 This fixes bug #1033.
311 kes Fix existing switch drive SD code to call autochanger to release
312 any old volume. This must be done to keep the autochanger from
313 releasing subsequently newly reserved volumes in doing a close().
314 This should fix bug #1018.
315 kes Fail if attempting to get console input in batch mode. This
316 should help fail RunScript console commands that are incomplete.
317 kes First cut implementing switch_drive() in SD (not actually called).
319 kes Implement first cut running console commands in a RunScript.
321 ebl Fixes bug #1028 where 'Selection Type' option was not usable
323 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
326 Release Version 2.2.7
328 kes Add new free_tls() entry point so that Win32 builds.
329 kes Fix compile warning in src/lib/util.c
330 kes Fix entry point for edit_job_codes() so that Win32 builds.
331 kes Fix seg fault Frank Sweetser reports in regression testing
332 on his systems. The problem was that the original author of
333 bsnprintf.c did not take into account the side effects of
334 using ++x in the argument to a #define.
335 kes Make SD protocol backward compatible with version 2.2.x.
337 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
338 because Bacula no longer restores sockets.
339 ebl Always use ignorecase fileset option on win32 FD.
341 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
342 that implements double quoting include names in conf files,
343 and also allows piping input by having the first character
344 be a vertical bar (|).
345 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
346 that implement %f in RunScripts to pass the FileSet name.
347 kes Skip leading | when lex input comes from a pipe as suggested
348 by Michael Stapelberg <michael@stapelberg.de>.
350 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
351 Nerijus Baliunas <nerijus@users.sourceforge.net>
353 kes Implement Plugin Directory and plugin events.
355 kes Implement a security enhancement: TLS authentication but no
356 encryption. Enabled by setting 'TLS Authentication = yes'.
357 Note when this is on, TLS encryption is turned OFF!
359 kes This patch corrects a problem where the maximum concurrent storage
360 jobs counter gets out of sync during restore jobs causing jobs to
361 'wait on max Storage jobs'. This patch fixes bug #1009.
363 kes This patch fixes bcopy so that it produces correct Volumes.
365 kes This patch eliminates spurious output to the console during a VerifyVolume
366 job that contains encrypted data. It fixes bug #1024.
368 kes This patch prevents the 'status dir' command from trying to use a scratch
369 volume and possibly moving it from one pool to another. This patch fixes
372 kes Add new include to postgresql.c suggested by Marc Cousins so
373 that it compiles correctly with pgre version 8.3.
375 kes Fix --archivedir addition to configure. Replace it with
376 --with-archivedir in configure.in This fixes the regression
378 kes This patch fixes bug #1012 where the job is canceled because
379 of Max Run Time exceeded when the job has not yet started.
381 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
382 one 'part' to write. Instead of each part being stored on disk,
383 written to DVD, then deleted from disk, all parts are written to disk,
384 and only the last is written and deleted from disk.
385 kes This patch fixes the status command to include the formating string for
386 JS_AttrInsterting. It fixes bug #1021.
387 kes This patch should fix the Mac OS X build problem on the latest
388 Darwin, where sys/types.h was not included correctly (apparently
389 due to a change in the Mac headers). The solution was to explicitly
390 ensure that it is defined for the ./configure.
391 This patch also has a rebuild of configure that includes the Debian
392 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
393 kes This patch should ensure that queued messages to the console are
394 displayed as soon as possible. It should fix bug 1007, but has been
395 reported not to work.
397 kes This patch fixes the infinite loop when trying to increase the
398 maximum number of volumes in a Pool during the add command.
399 This patch fixes bug #1008.
401 Release Version 2.2.6
403 db Remove extra data on estimate command in joblist for bat.
405 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
406 really change anything, but is the beginning of doing it *right*.
407 To do it completely right the LastWritten date must be passed to
408 the SD, but it is not yet done.
409 kes Minor tweaks to some bat restore SQL.
410 kes This patch fixes bug #1003 where putting the message output from
411 a Verify job into the catalog results in a recursive loop. The problem
412 seems to show up only with postgresql (to be verified).
413 kes Correct %x to %p in postgresql debug statement.
415 kes Fix bug #942 where lots of emails where generated when the heartbeat
416 interval was low and Bacula wanted a different tape from the one in
419 ebl Add new SD despooling attributes and Dir inserting attributes
420 job status codes in the catalog (Status table).
422 ebl Use qmake-qt4 instead of qmake when available (debian system).
424 kes Add a security warning to src/cats/make_catalog_backup.in indicating
425 that passing the password via the command line (arg 3) is insecure.
426 This responds to bug #990 (it doesn't fix it).
428 kes Set default debug_level to zero. This corrects bugs #991 and #993.
429 kes Fix a crash in bat when it cannot connect to the Director for example
430 if the Director is not running.
431 kes Remove redundant INDEX (JobId) from File table in the trunk.
433 kes Make explicit exception to GPL in LICENSE to permit linking
434 the Win32 FD with Microsoft VSS code.
435 kes Apply the Solaris package patch from
436 Masopust, Christian <christian.masopust@siemens.com>
437 kes Apply the patch to optionally add a timestamp in the debug output
438 submitted by Mariusz Czulada <manieq@wp.eu>.
440 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
441 backend (sql_strerror). Fixes bug #989
443 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
444 It applied with no problems.
445 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
447 kes Redirect stderror to stdin on mt status command in mtx-changer.in
448 since the status is returned on stderr on Solaris.
449 kes Activate Close button on tray-monitor window. This fixes
451 kes Check for NULL item in parse_conf.c before calling it. In the
452 case of Device, there is no item and this caused a seg fault when
453 Device appears in the conf file.
454 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
455 avoids pulling in config.h multiple times in some new code.
457 kes Fix spurious warning message printed when creating a volume with
458 a LabelFormat. This fixes bug #976.
460 Release Version 2.2.5
462 kes Add JobId in place of Job name in all the Jmsg() output.
463 kes Correct the APP_DESC for the Win32 storage service (remove an e).
465 kes Make maxvol-test and new more strict maxvol2-test work.
466 kes Print JobId in all Jmsg() job output.
468 kes Add new SD despooling attributes and Dir inserting attributes
469 job status codes. This fixes bug 961.
470 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
472 kes Fix doc issue. This fixes bug #963.
473 kes Fix listing performance problems in bat. Pointed out by
475 kes Remove old debug code.
476 kes Fix bat code that tests for Win32. This should fix bug #968
477 kes Query 5 list wrong Vol after migration. This fixes bug #960
479 ebl Fix #969 where user can't change Replace option in restore menu.
481 kes Save jcr in thread specific data (tsd) for each thread.
482 kes Make Dmsg() print JobId as -%u.
483 kes Make Jmsg, Emsg, and others automatically pickup the jobid
484 for the thread if it exists.
485 kes Remove old reservation debug jid code.
486 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
487 ebl Add an option that permit to specify spool size in job
488 definition. (Applying patches/testing/spoolsize_per_job.patch).
489 You must upgrade SD and DIR at the same time.
490 dvl Add new configuration item --archivedir
491 dvl Adjust regression tests to use tmp not /tmp. This will allow
492 multiple concurrent runs of the regression tests.
494 kes Fix race condition that drops final block written to volume.
495 This happens in rare cases with multiple simultaneous jobs
496 when the Volume fills. This fixes bug #964. May be related
497 to bug #935 and possibly #903.
498 kes Eliminate more strerror() and replace with bstrerror().
499 kes Remove BSD getopt and replace with unrestricted IBM version.
500 kes Fix Win32 build for changed calling sequences.
501 kes More tweaks to the mount volume routines to get everything
502 right. Changed variable name from find to have_vol, which is
503 much easier to understand.
504 kes Enhance btimer debug code.
506 kes Fix FD->SD authorization failure, which was due to spurious
507 wakeups from a pthread_cond_timedwait(). Simply check the
508 predicate before continuing. This fixes bug #953.
509 kes Add const char where needed (more to do). Remove temp debug code.
511 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
512 kes Don't overwrite error message in check_tables_version.
514 kes Unlock batch insert tables with same calls used elsewhere.
515 kes Allow starting 59 jobs a second.
516 kes Make SD session key more random.
517 kes Add retry for SQLite opening db if it fails. Probably helps
519 kes Suppress extra error messages during batch insert failure.
521 kes Add jcr to timer packets so if killed message can be sent to job.
522 kes Add JobId to all Dmsg() output.
523 kes Put some FD auth code on dbglvl rather than fixed.
524 kes Return insert attributes error message in db msg buffer to avoid
525 false error messages. Helps fix bug #966.
526 kes Separate batch init error messages. Probably helps fix bug #966.
527 kes Make SD code that contructs attribute insert check string lengths
529 kes If Dir gets an error during inserting attributes, cancel SD.
530 This reduces unnecessary error messages.
532 kes Correct search boolean for getting Volume info
533 ebl Cleanup batch insert code. Probably fixes bug #965.
534 kes Back out one small change to the reservation system (reserving a volume).
535 kes Rework how a Volume is mounted. It is now much more intelligent and
536 will always attempt to use any mounted volume if possible and reduces
537 calls to the Director asking about volumes.
539 kes Turn off some code when batch insert not enabled.
540 kes Edit FD name in connect error messages.
541 kes Rework the reservation system to take into account that the Director
542 might give us a Volume that is different from the current one being
543 used, and to ensure that we don't exceed Maximum Volume Jobs.
544 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
545 fatal error with multiple jobs running'
546 kes Add more debug code in reservation system.
547 kes Implement maxvol-test to check bug #947.
549 kes Add code to handle tray monitor separated from Win32 FD.
550 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
552 kes Add missed return in fixing verify bug -- trunk only.
553 ebl Fix a command parser issue causing a director segfault.
554 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
556 kes Increase the max block size to 4MB fixes bug #957.
557 kes ERABT if user sets min block size > max block size. Fixes bug #956.
558 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
559 is not properly mounted (recognized) during a poll.
560 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
561 Job that has differences reports Verify OK.
562 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
564 ebl Add an option to operate on all pools with update vol parameters.
565 This complete the project 20. Patch from Nigel Stepp.
566 ebl Add history support to bconsole when using readline.
567 Using Ctrl-D to exit doesn't update .bconsole_history
568 kes Modify new volume algorithm to use max MediaId for generating next
569 volume number rather than the count of Volumes. This should essentially
570 eliminate the failure rate if some volumes were deleted. Bug #921.
571 kes Begin implemention of Optimize Job Scheduling.
572 kes Implement restore callback that Dirk and I agreed on for bat
573 restore. This fixes bug #928. Restore of backup of zero files fails.
574 kes Fix SQL Catalog logging which broke with new db_escape_string
577 Release Version 2.2.4
579 kes Fix bacula_cats.def for new db_escape_string().
580 kes Increase size of name string when FD making connection to SD.
581 May fix bug #953. FD->SD connection failure.
583 kes Add code to help Dan debug 2drive-incremental-2disk test.
584 kes Add code to try to fix bug #908.
585 kes Add waits to multiple exit detection code to try to force pid
586 file to always be deleted.
587 kes Restore good dev.tar.gz to rescue set appropriate binary property.
589 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
590 trying to switch drives by checking for blocking before unblocking.
592 kes Cancel storage daemon in all cases where FD reports error. This
593 should fix virtually all cases of bug #920.
594 kes Fix db_escape_string() for MySQL which did not compile.
596 kes Fix error message that was clobbered when Dir tells SD it does not
597 have write permission on Volume. This should fix a minor point
598 in bug #942, but not the main problem.
599 kes Add code to cancel job in SD if FD connection fails. This should
601 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
602 dvl Pass jcr and db into db_escape_string() to enable better escaping
604 kes Fix migration code to get correct Volume name with multiple volumes
605 by skipping |. Fixes bug #936.
606 kes Implement patch supplied by Landon to fix bug #944 where using
607 TLS with bconsole uses 99+% of the CPU.
608 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
610 kes Move patches into patches directory.
612 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
615 ebl Using 'm' in bconsole will show messages like before,
616 and not memory usage.
617 kes Fix bug #935, and probably also bug #903 where files were not
618 restored. MediaId was not properly set in JobMedia record after
621 kes Suppress chown and chmod error messages if the FD is not running
624 kes Apply Martin Simmons' patch that should turn off the new API usage
625 when batch insert is turned off allowing building on older
627 kes Add ./configure search in qwt-qt4 for qwt package
629 kes Bacula is now free of 3rd party GPL copyrighted code!
631 kes Add guid_to_name.c/h which replace idcache.
632 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
634 ebl Detect if new PosgreSQL batch insert API is present.
635 kes Correct incorrect mempool call causing Director crash. Occurs on
636 systems without va_copy().
637 sb Update spec files for 2.2.1 release
639 kes Fix memory pool call in ua_output.c. bug #934.
640 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
641 Add test program to fnmatch.c
643 kes Integrate patch to README.vc8 from
644 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
645 edit it to get it into Unix patch format.
646 kes Implement mkpath.c to replace old FSF makepath.c
648 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
650 Release Version 2.2.1
652 kes Update POTFILES.in
653 kes Cleanup a few underquoted AC_DEFUNs in configure
654 kes Apply patch from Martin Simmons that adds a test for va_copy to
657 kes Fix bug #921 by increasing the number of tries to create a new volume
659 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
660 can be called multiple times. Implement a version for machines
661 without va_copy() that gets a big buffer.
663 kes Integrate more portable zone offset code into bsmtp.c
664 Submitted by Attila Fülöp.
666 kes Fix bad SD->FD return status reported by
667 (James Harper) <james.harper@bendigoit.com.au>
668 ebl Fix a bug in read_close_session which return random status
669 thanks to James Harper
671 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
672 and directory names during restore of single file/directories.
673 kes Add sanity checks to .sql command when string is empty. Hopefully
674 that will resolve Dirks Director crash.
676 kes Apply patch submitted by Martin Simmons that corrects a seg fault
677 in the bsmtp chat subroutine when debug is >= 10.
679 kes Fix Director crash when running bat SQL queries.
680 kes Add David's notes on Item 8: Copy pools.
682 kes Rework projects file to be current and ready for a vote.
683 kes Enhance lex scanner error message.
685 kes Tweak LICENSE file to mention BSD code.
686 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
687 if specified on the ./configure.
688 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
689 This class is intended to allow us to open a second bsock to the
690 Director while in the restore subdialog.
692 kes Fix configure to create bat Makefile before creating dependencies.
693 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
694 kes Add a tooltip to the tray monitor.
695 dvl Set the Director's PID file before dropping privs. This fixes
698 kes Update AUTHORs file
699 kes Increase the default max concurrent jobs to 20 in FD and SD to
700 correspond with the default .conf files.
701 kes Rewrite the Win32 service routines. This eliminates the 3 copies
702 some different, of the same file created by RN when porting the
704 kes Rearrange some of the Win32 directories and the placement of the files
706 kes Set DEVELOPER flag in version.h
708 ========================================================================
709 Release Version 2.2.0
711 kes Apply a second doc patch from Marc.
712 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
713 improves the tips section that discusses how to setup multiple
716 kes Update bat README file.
717 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
718 corrects a typo in the Recycle status check in db_find_next_volume().
719 This will probably fix a number of annoying problems with multiple
721 kes Modify most of dird/msgchan.c to use bsock class calls rather than
722 bnet calls -- no functionality change.
724 kes Modify the Verify output to specify if files are missing on
725 the Volume(s) or disk. Fixes confusion in bug #916.
726 kes When more than one Volume is read in a migration job, the last
727 Volume bytes reported are from the last read volume rather than
728 the last written volume. Fixed. This fixes bug #910.
729 kes Fix display of Recycle flag after update volume=foo recycle=yes.
730 It previously printed New Recyle flag is: no. This fixes bug
733 kes Correct seg fault when switching tape drives during restore.
734 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
735 be used until after 2.2.0 release.
737 kes Remove fnmatch() in SD that permitted wild card specifications.
740 kes Fix %g in filename returned by SQL for browse tree reported by
742 kes Fix configure so that it puts config.out in the cwd rather than
744 kes Attempt to fix the locking problem reported by Eric in bug #906.
745 kes Make berrno class to leave errno unchanged after constructor call.
746 kes Make bnet_server use the heap rather than the stack to allocate
747 its socket fd pointers to avoid a crash at termination. Problem
748 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
750 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
751 and putting it in depkgs-qt along with Qt4.3.
753 kes Rework code in acquire.c that switches drives for reading when
754 the Media Type does not match. This should fix bug #906
756 ebl Fix a director segfault during job setup #907
757 kes Correct seg fault in postgresql when first operation returns no
758 rows. Fixes Dirks File browser problem seg fault with bat.
760 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
761 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
764 kes Implement PopUp YES/NO dialog for bat.
766 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
768 kes Correct RunScript to terminate job in FD on failure.
769 kes Change abort_on_error and AbortJobOnError to fail_on_error
770 and FailJobOnError in RunScripts.
771 kes Minor tweaks of code formating in RunScripts, principally to
772 avoid depassing 80 columns.
774 kes Eliminate one #ifdef Win32 in bsmtp
775 kes Implement grow tool to grow a file for testing very large databases.
776 kes Add big-vol-test to test Bacula seeking with > 5GB.
779 kes Modify find_next_volume() to return all values in Media record.
780 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
784 kes Update Release notes
786 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
787 Warning, in previous beta version, all media get from scratch keep their
790 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
791 This should fix bug #842. Made a note to look at removing the temp
792 files at the end of the install.
793 kes Add ability to mount and unmount a file device providing it is
794 marked as being removable and has the appropriate mount and unmount
795 commands defined in the Device resource. This fixes bug #830.
796 kes When applying a storage override, release all previous storage
797 definitions rather than just prepending the new storage.
798 This should prevent a good deal of confusion.
800 kes Implement ./configure search for qwt libraries.
802 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
803 Win32 FD. This should fix bug #893.
804 kes Remove an unnecessary beep in Win32 init code.
805 kes Update copyright dates in Win32 executable about boxes.
806 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
807 code with a BSD getopt.c and getopt.h.
808 kes Remove sched.h from the Win32 compat directory -- not used.
809 kes Remove the Exit menu item from the Win32 tray monitor. If you really
810 need to shut it down, do it through the services panel or the command
812 kes Remove some inappropriate Bacula FSFE copyrights.
813 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
814 kes Fix regress config non-portable test as pointed out by
815 Florian Heigl <florian.heigl@gmail.com>
816 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
817 as pointed out by Florian Heigl <florian.heigl@gmail.com>
819 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
820 Reported by Frank Sweetser.
824 kes Fix client-only build.
825 kes Integrate client-only fixes for bsys (initgroups) and conio from
826 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
827 kes Make arguments to get_scratch_volume() in same order as other
829 kes Rework the prune_volumes() subroutine so that after purging and
830 no volume found in desired pool, it will check for a scratch
831 volume. This prevents recycling the whole scratch pool.
832 kes Add code to status storage to print boffset_t (largefile support).
834 kes Move qwt (Graphics libarary for Qt4) to depkgs.
835 kes You now need a --with-qwt=<dir> to be able to build bat.
836 kes Update src/win32/cats/bacula_cats.def to include the new
837 db_get_query_dbids() call on Win32.
839 kes Correct a problem when selecting a scratch volume and moving
840 it to another pool that lost some columns.
841 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
842 kes Enhance Autochanger error messages to include Volume and device name.
843 kes Rework prune_volumes() code to take account of InChanger flag,
844 and to handle recycling volumes going to the Scratch pool and
845 current pool because the RecyclePool directive.
846 kes Implement a better and more efficient db_get_query_dbids() to
847 handle creating and passing back a list of DBIds.
851 kes Start work on new more efficient DBId subroutine. First use
852 will be for recycling volume to Scratch inchanger.
853 kes Increase number of JobIds in pruning from 1000 to 10000.
854 This to be replaced by above routine.
855 kes Begin implementation of building Qt4 on Win32.
856 kes Correct typo in fix I added for bad TLS shutdown.
857 kes Pull 2.0.3 patches into patches directory.
858 kes Update Release notes. Include qt-console in line count.
859 kes Update Projects file.
861 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
862 bug in migration code where a job that spanned two volumes
865 kes Implement new BST_DESPOOLING blocked state. Change from locking
866 during despooling in SD to blocking. This means that other threads
867 can work with the device structure, in particular the reservations
868 system while despooling.
870 kes Fix return in reservation message queue that missed clearing
871 the jcr lock (implemented 26Jun07 below).
872 kes Rename a number of dev methods to make locking function names
874 kes Document locking in lock.c. Move lock structures to new file
877 kes Move reservations message lock to lock jcr only this
879 kes Move main SD locking code into lock.c (new file).
880 kes Update Win32 build to include lock.c
884 kes Dirk committed the qwt library code for drawing graphs in bat.
885 kes Tweak install of qwt so that it is integrated with ./configure.
887 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
888 out by Eric (my typo).
889 ebl Fix configure.in to get batch mode enable
890 kes Return correct string from authenticate.cpp in bat when connecting
892 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
893 spurious line drops when using TLS.
894 kes Do not file reparse points when restoring a file that already
897 kes Implement Windows reparse points -- similar to directories, but
898 we do not descend into it. This is a first cut. They seem to
899 be backed up, but restore is not yet tested.
900 kes Remove restore_blocking in tls code when shutting a socket to leave
901 it in blocking mode. Hopefully this will fix the encryption bug
902 reported by Frank Sweetser.
903 kes When opening a file for backup, tell the OS that we are going to
904 read it sequentially -- optimization.
905 kes Change variable names in authenticate_director() to not conflict
906 with member names in bat. Caused great confusion with compiler,
909 kes Queue openssl error messages in case of comm problem.
910 kes Do shutdown() call if socket terminated.
911 kes Remove some duplicated code in tls.c
912 kes Move more of the bsock member variables into private and access
914 kes Add Frank Sweetser's tls-test to the regression suite.
916 kes Add Swedish sv.po file
918 kes Don't print clock skew message in FD if less than 3 seconds diff.
919 kes Add a bit of VSS info to status client.
920 kes Implement a first cut of Vista VSS, using Win2003 code.
924 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
925 loaded tape but uses first drive).
926 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
927 This was indeed a Win32 issue.
929 kes Simplify search of autochanger for in-use Volume.
930 kes Fix exit condition of check for in-use volume. kes Remove
931 inappropriate my_postgresql_free_result() in db_close()
933 kes Fix bad return in FD when encryption signature not found.
934 Probably caused a crash.
935 kes Inhibit missing encryption signature error messages for
936 file types where no signature computed.
937 kes Correct inverted check on autochanger in reservation system.
938 kes Tweak debug code in autochanger reservation.
940 kes Add some additional locking in the cats directory in subroutines
941 that modify packet variables called from batch insert.
942 kes Rework how dcrs are allocated. new_dcr() can now be called
943 with an existing pointer, and it will simply clean it up.
944 This allows the reservation system to test various different
945 devices, and will permit easy device changes.
946 kes A bunch of changes all over to handle new new_dcr() calling
948 kes Work more on the Volume management in the SD. Remember Volumes
949 for tape drives and for autochangers (even virtual disk changers).
950 kes When looking at the Volume list to reserve a drive, handle
951 autochanger names correctly by interating through the changer
952 devices. Also call the Director to see if a Volume is suitable
954 kes Fix some bugs in bscan. Make sure all media records are written.
955 Make sure that valid JobMedia records are written for disk files.
956 Previously they were completely wrong.
957 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
958 that the URLs don't change and so that the developers will all
959 work off the same copy. Rebuild from scrach.
960 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
964 kes Fix seg fault in FD from incorrect digest size.
965 kes Fix argument to non-OpenSSL crypto.c subroutine.
969 kes Remove a few malloc()s from the encryption code.
970 kes Use the class calls to bsock in filed/backup.c and restore.c in
971 place of the old bnet_xxx code.
972 kes Implement code that does an on the fly calculation of the
973 signing digest during restore of encrypted files. It makes
974 a best guess at the algorithm, and if it is not correct, will
975 then revert to the old code which reads the file after it is
977 kes Implement at least one missing crypto stream in stream_to_ascii()
978 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
979 #877 where a reload with bad syntax causes Dir to exit.
981 Cut: 2.1.14 beta (not released)
983 kes Do not free a volume on a tape drive until another volume is
984 mounted and read, or the autochanger unloads the volume.
985 This should help the SD re-use volumes that are already mounted,
986 and should fix bug #886.
987 kes Apply patch from user brettedgar that allows gnome2-console include
988 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
989 kes Apply patch from Lucien Weller that fixes day of week calculation
990 because of DST flag problem. Fixes bug #887.
992 kes Move find_next_appendable_volume() to after acquiring a valid device
993 in reserve.c. This fixes bug #864 -- confirmed by reporter.
995 kes Unable to reproduce bug 872. However added additional testing for
997 kes Bug #874 resolved by documenting SQLite limitations.
998 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
999 kes Bug #881 resolved by removing typo in mtx-changer script.
1000 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1001 approval. Added a link to the wiki on the web page, and implemented
1002 a backup from http://paramount.ind.wpi.edu
1004 kes Fix update allfrompool to pass pool name.
1006 kes Convert to pure GPL v2 license.
1007 kes Fix sscanf problems reported by Peter Buschman that caused
1008 a bus error on Solaris.
1009 kes Rework (simplify) the select prompt in bat.
1010 kes Move get_jobid_from_tid() into lib and create a
1012 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1013 should definitely fix the problem of lost error messages in the
1015 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1016 kes Eliminate tcpd.h from the project. Enclose the #include from the
1017 library with extern C ...
1018 kes Add print of signal name when a signal is trapped.
1020 Release: 2.1.12 beta
1022 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1024 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1025 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1026 makes SQLit3 run 30 times faster, though a bit less safe.
1027 kes Implement --with-batch-insert in configure and detection of thread
1028 safe libraries. It is on by default, but turned off if no thread
1029 safe library (e.g. SQLite 2) is available.
1031 kes Fix Bacula PostgreSQL buffer overruns.
1032 kes Do better checking for NULL results returned from PostgreSQL;
1033 implement retry for failed queries; clear results buffer after
1034 failed query. Hopefully this will correct the PostgreSQL failures.
1036 kes Implement algorithm to handle only one appendable volume with
1037 Prefer Mounted Volumes = no.
1038 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1039 returned from a query.
1040 kes Make volume lock recursive.
1041 kes Implement an additional volume reservation algorithm that
1042 starts by considering all reserved volumes then uses the
1043 old brute force algorithm of searching the resources to
1044 find a suitable device.
1045 kes Add new reservations debug code and refine the old code.
1046 kes Update the win32/dll/bacula.defs file.
1048 kes Tweak reservations algorithm to permit a few more cases, i.e.
1049 volume reserved, but on different drive, ...
1050 kes Enhance SD status to include Pool and Media Type for drive in a
1051 more readable format (a bit longer).
1052 kes Fix PostgreSQL double free.
1054 kes Minor refactoring of restore decryption code.
1055 kes Add code to smartall.c to detect double free of a buffer.
1057 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1058 so that bsmtp will create a correct email address (mailbox only).
1059 kes Modify 'memory' command so that the buffers are listed as 'In use'
1060 to avoid confusion with Orphaned buffers.
1061 kes I reworked the OpenSSL include/lib flags to be handled in
1062 the standard Bacula way, which should fix bug #863 concerning
1063 non-standard OpenSSL libraries.
1065 kes Implement Help Browser window for bat.
1066 kes Fix reload bug that reset StorageId to zero.
1068 kes Fix TLS #ifdefing when TLS turned off.
1069 kes Ensure that when labelling a tape with Slot=0 that InChanger
1071 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1073 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1074 add DISTINCT (required by PostgreSQL).
1075 kes Implement BSOCK authenticate_director() method. Eventually will
1076 authenicate all daemons.
1077 kes Move several more functions into the BSOCK class.
1079 kes Add code to tell the OS that we no longer need a cached
1080 file that we were reading. In findlib/bfile.c. Also,
1081 only cache files that we are reading. Thanks to
1082 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1083 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1084 kes Implement script to automatically generate cats and dll .def
1085 files for Win32 dll.
1086 kes Update README.mingw32 to include new .def file generation.
1087 kes Correct typo in UTF-8 error message as reported by:
1088 jhernandez <julianhernandez@gmail.com>
1089 kes Add additional sm_check() code on debug level 1.
1090 kes Set default debug level to 1.
1091 kes Trap SIGABRT in attempt to get traceback.
1093 kes Reduce bat connect timeout from 30 to 15 seconds.
1094 kes More restructuring and implementing BSOCK class in place of
1096 kes Remove a few unnecessary malloc() tests in crypto code.
1097 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1098 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1099 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1101 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1103 kes Fix Verify InitCatalog. The attributes were not pointing to the
1104 correct saved location.
1105 kes Implement message callback so that GUI is sure to get all
1106 daemon messages. Currently displayed in a dialog in bat.
1107 kes Ignore SIGUSR2 (Bacula timer) in bat.
1108 kes Apply regress patch from bug #859 to allow regress to work
1109 with Solaris compiler.
1111 kes Begin adding TLS support to bat.
1112 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1113 clean up lex.c and make it more readable.
1115 kes Move more bnet functions into the BSOCK class.
1116 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1117 kes Complete change of berrno strerror() method to bstrerror()
1119 Release: 2.1.10 beta
1121 kes Cleanup incorrect email addresses in bsmtp.
1122 kes Make bat display initial messages rather than discard them.
1124 kes First cut of adding .mod to the run command.
1125 kes Implement auto display of messages in bat.
1126 kes Enhanced preferences to allow all Bacula output to be
1129 kes Try to make bsmtp date routines more generic.
1130 kes Fixed bug #856 autochanger documentation.
1131 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1132 kes Add new cats entry point so Win32 builds.
1134 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1136 kes Do better checking for the MySQL 64 bit libraries looking for both
1137 .a and .so libraries.
1138 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1139 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1140 kes Require the thread safe version of MySQL during configure. Thanks
1141 to Andre Noll for pointing this out.
1142 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1143 continuing in migration code.
1144 kes Apply implementation of tray-monitor font derived from gnome-console
1145 submitted by Andreas Piesk <a.piesk@gmx.net>
1147 kes Eliminate important memory loss in SQLite
1148 kes Fixed the batch insert MySQL thread specific data that was not
1149 being freed. See cats/mysql.c:db_thread_cleanup().
1150 kes Fix restore before command.
1151 kes Convert old hdr.name to name() in a few places.
1152 kes Implement update jobid command.
1153 kes Return all time_t dates in db_get_job_record()
1154 kes Stop watchdog in SD earlier.
1155 kes Put Pool just after Storage in please mount message.
1156 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1159 kes Update the po files.
1160 kes Fix Verify InitCatalog by making it cache attributes.
1162 kes Change name bacula-bat to bat for man 1 page to correspond to
1164 kes Check for client and store NULL pointers in status command. This
1166 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1167 kes Fix sign extended editing of %p.
1168 kes Clean out a little old #ifdefing in cats/mysql.c
1170 kes If time diff between DIR and FD is more than 600 seconds convert
1171 INFO message to WARNING.
1172 kes Implement heap size display in status for all daemons.
1173 kes Attempt to fix MySQL db open memory loss (not successfull).
1174 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1175 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1176 Query. This looks like a MySQL but but by doing extra releases,
1177 the memory goes away. This should fix bug #847.
1179 kes When backup fails, cancel SD before waiting for sd termination.
1180 kes If SD is waiting for FD to connect during cancel, wake up the
1182 kes Fix fsf code so that errno is correctly reported.
1183 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1185 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1186 so that Bacula doesn't later stumble into a seg fault.
1187 kes Use the term Restore Client in the restore Job report.
1188 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1189 the original job's FileSetId.
1190 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1191 spooling in migration jobs. Not yet tested.
1192 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1193 reading conf file from a pipe. However, do it with open_bpipe()
1194 rather than popen. Not yet tested.
1196 kes Fix an ugly bug where the VolCatBytes were getting updated
1198 kes Implement bconsole memory command that prints current memory
1199 usage, plus smartalloc dump.
1200 kes Clarify some error messages in backup, admin, and migrate.
1201 kes Shrink label dialog to smaller size.
1202 kes Invert Cancel OK buttons on restore to be OK Cancel.
1203 kes More strerror() to bstrerror() conversions.
1205 kes Start implementing bstrerror() in place of strerror().
1206 kes Stripping path -- seems to work.
1208 kes Prevent door and port files from being restored (mostly
1210 kes Free an unreleased buffer in compat code.
1211 kes Change console Job name from *Console* to -Console- to eliminate
1212 Win32 filename problems. Put Win32 path separator when creating
1213 Console file. This fixes bug #846.
1214 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1216 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1218 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1219 to force Win32 error message.
1221 kes First cut strip path. The data should be passed to the FD,
1222 but nothing is done with it yet.
1223 kes Enhance the digest and signature routines in the crypto
1224 library to accept a JCR and to use it to print error messages
1225 so that they will go in the Job report rather than the daemon's
1227 kes Simplify some of the verify signature code.
1228 kes Simplify a few of the alternative returns in the signature
1231 ebl Use only POSIX regex instead of GNU regex in breg.c for
1232 File relocation. It fix broken freebsd compilation.
1233 kes Convert all other Dir files to use new ua class message
1235 kes Tentative fix for missing digest signature in bug 807.
1236 kes Correct handle problem in new win32_ftruncate routine.
1237 kes Convert ua_purge.c and ua_update.c to use new ua class
1238 message routines for bat.
1240 kes Correct incorrect installation of LICENSE in Win32 installer.
1241 kes Display LICENSE at the beginning of the Win32 install.
1242 kes Attempt to correct the need for the png files to be installed
1244 kes Reapply my bat.conf install script in qt-console. I think I
1245 editted bat.pro instead of bat.pro.in and it was lost.
1246 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1247 the /var/lock/subsys for subsysdir. Also corrects typos in the
1250 kes First cut update job.
1251 kes Correct configure to include qmake of src/qt-console directory.
1253 kes Make restore job yes/mod/no print in one command so GUI works.
1254 kes First cut implementing backup and restore client.
1255 kes Correct editing in Verify output that caused a seg fault.
1257 kes Insure that bat.conf is not overwritten during installation.
1258 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1259 while I was implementing migration in March 2006 !
1261 ebl Cleanup file relocation, using char *RegexWhere instead of
1262 char *where + bool where_use_regexp
1263 kes Update some manpages and add bat manpage.
1264 kes Make a first cut at converting bacula.spec.in for bwx-console
1266 kes Apply patch from John Goerzen to add hostname as fourth argument
1267 to make_catalog_backup script.
1268 kes Fix typos I introduced into bsmtp.c
1269 kes Make pm_strxxx() routines handle input of NULL pointer. This
1270 is to protect from NULL pointers returned from SQL databases.
1271 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1272 kes Add more debug to FIFO code -- fix fifo regression test.
1274 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1275 kes Add thread timer to bnet_connect() to break from OS if wait time
1278 kes Update Win32 build to include new files, new symbols, and
1280 kes Implement socket level heartbeat (tcp_keepidle)
1281 ebl Commit File relocation patch
1282 kes Make bat have 'make install' target.
1283 kes Warn during install if old gnome-console binary found.
1284 kes Warn during install if old wx-console binary found.
1285 kes Add -8 option to bsmtp command line to add content type utf-8.
1286 Fixes bug #809. (Character coding problem in bsmtp).
1287 kes If < is found in target (from, to, cc) then do not enclose the
1288 target in < > in bsmtp. Fixes bug #772 (malformed address).
1289 kes When printing certain items in dbcheck, stop after 300000.
1290 Fixes bug #822. (dbcheck loops).
1291 kes Incorrect status in Dir after waiting for mount with poll set.
1294 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1296 kes Print waiting to reserve a device every 5 mins.
1298 kes Don't call close_part in label.c if tape and relabel.
1299 kes Don't free volume if busy in close() -- should help with
1301 ebl Fix #824 RunScript bug (After script could be execute twice)
1302 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1303 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1304 Add a regression script to test RunScript
1306 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1309 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1310 deprecated. No additional bugs will be fixed, and they will be dropped
1311 in a future release (probably 2.4.0).
1312 kes Change name of wx-console to bwx-console to make it more Bacula
1314 kes Change the name of gnome-console to bgnome-console to make it
1317 kes Some time in March, a Feature Request with patch from Jorj Bauer
1318 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1320 The ability for the director to validate a Client (FD) CN against
1321 an arbitrary set of patterns rather than the hostname, with
1322 A new 'TLS Allowed CN' set of directives which are implemented
1323 in the Client resource. Then pattern matching is used in place
1324 of hostname matching against the Certificate's CN. As an example, we
1325 have certificates which (a) use a local CA, and (b) have a CN of the
1327 kes Add new/changed entry points to Win32 build
1328 kes Create unaccepted-projects for projects that are not accepted.
1329 kes Simplify locking in the reservations system.
1330 kes Add more debug code in reservations.
1331 kes Make sure error condition on reserving a volume is handled correctly.
1332 kes Correct handling of volume_in_use.
1333 kes Correct handling of initializing a device.
1334 kes Move handling of broadcasting releasing a device into release_device().
1335 kes Correct attaching dcr to dev so that it is only done if device
1336 is properly initiated.
1338 kes Locking debug level tweaks in SD.
1339 kes Tweak new Volume code.
1341 kes Add exec external-command [wait-seconds] to bconsole. This
1342 executes the external-command. Note! normally external-command
1343 should be enclosed in double quotes.
1344 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1345 it should normally be off in a production system.
1347 kes Implement die command for SD so that we can force it to dump.
1348 kes Implement SD lock debug code.
1349 kes Implement new algorithm for keeping Volume list in SD. It
1350 is now owned by the device.
1352 kes Implement new code for freeing in use volumes that should
1353 resolve if not all, some of the problems of multiple drive
1354 tape conflicts described in bug 801.
1356 kes Fix gui/bacula-web/images files in svn.
1357 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1359 ebl Fix a bug in batch mode (in string escape)
1360 kes Correct migration prune SQL typo that crept in in a
1361 recent 2.1.x change.
1363 kes Move bnet_despool() into class in bsock.c
1364 kes Modify job report to include director name and Build OS.
1365 kes Move drop root privilege and check_catalog() before fork.
1366 kes Add update database scripts (version 9 to 10) to updatedb directory.
1368 ebl Check size and age of each file after its backup to see if
1369 it has changed during backup, if 'checkfilechanges' is set.
1370 The FD will do an extra check (stat(2)) after
1371 each file backup. mtime, ctime and size are compared with
1372 'before backup' information. If time or size mismatch, an
1373 error message will be generated. You must upgrade FD to use it.
1375 kes Make database name and user configurable
1376 --with-db-name=xxx --with-db-user=xxx
1377 kes Add back database type to message.c for debugging.
1379 kes Implement dir_sql() which issues an SQL query.
1380 kes Modify bat medialist to use dir_sql() and do some minor C++
1381 formatting as well as eliminating a number of pointers, simplifing
1384 kes Fix some of the mtx-changer grep commands for tape label readers.
1385 kes Convert a number of bsendmsg into the appropriate send/warning/error
1386 message class calls.
1387 kes Suppress the using database message in the .sql command.
1388 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1390 kes Add context menu for floating a window.
1391 kes Some minor cleanup and name changes in qt-console
1392 kes Add doing mt setblk 0 in Win32 mtx-changer.
1393 kes Apply Martin's bug fix to move definition of ENODATA for
1395 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1396 sqlite2 and sqlite3.
1398 kes More pruning cleanup.
1399 kes Turn on wait_for_drive by default in mtx-changer.
1400 kes Turn on Batch insert code by default as it now passes regression.
1401 kes Add ./configure --enable-bat to enable building of Bat.
1402 No install yet though.
1404 kes Implement a new .sql command for bat.
1405 kes Implement code to turn off pruning in obtaining the next volume.
1406 Pruning is turned off for the status dir command, but turned on
1407 for SD requests and for the list nextvolume command.
1409 kes Correct Qmsg() that was not updated correctly when committing a
1410 previous change (probably the recent TLS patch).
1412 kes Write new subroutine is_volume_purged() that explicitly checks
1413 if the Volume is purged, and if so marks it as such. This should
1414 resolve problems reported about needing to mount twice to recycle
1416 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1417 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1418 amount of duplicated code.
1419 kes Do volume pruning only for the Media Type desired (reduces pruning time
1420 if multiple Media Types are in the same pool).
1421 kes Implement more detailed info in the Job report for the Bacula version
1423 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1425 ebl Add bbatch tool to bench database and insert mode.
1426 Fix sql quote stuff in batch mode
1427 Fix sql stuff for mysql
1429 kes Correct problems with am/pm scheduling. Fixes bug #808.
1430 kes Implement new prunning code that prunes up to 1000 jobs at
1431 the same time. The same technique can be applied to a number
1432 of other prune/purge subroutines.
1433 kes Add an insanity check when starting a new tape job to ensure
1434 that the tape position has not been changed. If so fail the
1436 kes Fix Win32 build for dlls to add the folllowing:
1437 src/lib/bsock.c -- new file with new entry points
1438 src/lib/dlist.c -- new entry points
1439 src/cats/sql_create.c -- new entry point
1440 src/cats/sql_cmds.c -- new DATA item exported
1442 ebl batch mode cleanup bscan-test is ok now.
1443 kes Implement SD code to check length of disk volume before appending.
1445 kes Correct return status on db_batch... routines.
1446 kes Add call to db_write_batch_file_records() to migration code.
1447 ebl Fix AfterJob timing
1448 kes Move the checking of the database in initializion of the Director
1449 to after we drop privileges. This avoids the need for both root
1450 and bacula access to the DB.
1451 kes Correct a misplaced variable definition in src/filed/backup.c
1452 kes Correct how the new batch insert db_create_attributes_record()
1453 uses the arguments. Caused a seg fault in bscan.
1454 kes Implement lock() and unlock() methods in DEVICE class.
1455 Implement block() and set_block(xx) methods in DEVICE class.
1456 kes Modify bnet_connect() so that it uses time() to check for the
1457 wait time expiring (on some OSes, some system calls may not
1458 return immediately).
1459 kes Modify Verify to obtain the previous JobId when it is actually
1460 running rather than at schedule time (as it was in 1.38.x).
1461 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1463 kes When checking pid in pid file, continue running if the pid is
1464 the same as ours. This occurs on IRIX after a system crash.
1467 kes Extend new GUI API.
1468 kes Make the ua structure a class, and implement send_msg(),
1469 error_msg(), warning_msg(), and info_msg().
1471 kes Apply fix from for building wx-console on the Mac from
1473 kes Implement new select mechanism for GUI programs.
1474 kes Reorganize initialization of stackedWidgets in bat.
1476 kes Add updated nagios plugin supplied by Christian Masopust.
1478 kes More bat implementation.
1479 kes File migrate bug with Pool Occupancy using mediaid instead
1480 of jobids. Fixes bug #795.
1481 kes Fix orphaned buffers in filed backup and verify due to
1482 crypto buffers not freed during errors. Fixes bug #789.
1483 kes Extend new GUI api code to tree commands.
1484 kes Ensure that tree and dot commands check console ACLs.
1485 kes Permit marking directory with trailing slash.
1486 kes Allow 20 console connections (instead of only 10).
1488 kes Add smartctl call to bacula-sd.conf as an example of getting
1491 kes Modify jobq.c to let simultaneous restore jobs run. This may
1492 cause them to fail if they cannot get a drive.
1493 kes Add Client Connect Wait to Storage daemon to permit users to
1494 modify the time the SD waits for a FD connection.
1496 kes Correct virtual changer check which was backwards. This caused
1497 volumes to be unloaded into slots already occupied.
1499 kes Apply Command ACL filter to JobId list in restore command.
1500 kes Correct typeo in var.c patch.
1502 kes Don't let Bacula prune File or Job records for the current Job.
1503 kes Fix variable substitution pad + inc bug reported (with patch)
1506 kes Correct SQLite log table index as reported by Luca Berra.
1508 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1510 kes Begin implementing new comm signals for API.
1511 kes Fix a few places in lib/message.c where the open fd may
1513 kes Continue implementing lib/bsock.c (real class). Make jcr,
1514 who, host, and port private. There are new methods to access
1515 them for non-class use. This required touching a number of files.
1517 kes Add LANG=C to autoconf/randpass so it works with languages other
1518 than English. Fixes bug #788.
1520 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1522 You will not be able to generate Include/Exclude list any more.
1523 It will be fixed soon.
1524 If you want to use this, you can apply
1525 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1527 kes Restore of sockets created false error messages because Bacula
1528 no longer restores sockets, but the code was still trying to
1529 set the attributes on a non-existent file. Reported by a user.
1530 ebl finish RecyclePool feature
1531 Media will takes Pool.RecyclePool
1532 when moving from Scratch to a Pool or when user will do
1533 update volume=xxx frompool
1534 To use it, add RecyclePool = aPool to your Pool resource
1537 RecyclePool = Scratch
1541 kes Expand new BSOCK class adding signal() and new BNET signals.
1542 kes Begin enhancing the dot commands adding a new API function
1543 that returns more information and will make it easier
1544 to interface to the Director from a program.
1546 kes Make DEVICE fd private. Its new name is m_fd, and can be
1547 obtained with dev->fd() outside the class. This is the
1548 first of many DEVICE members to be made private.
1549 kes Implement Michael Renner's idea on having a virtual disk
1550 changer. I made some minor modifications (e.g. I did not
1551 implement the Virtual Changer directive, but simply set
1552 the Changer Command to an empty string.
1554 kes Implement a BSOCK send() method that writes the whole record
1555 in a single write() request rather than in two.
1556 ebl add update volume=xxx recyclepool=yyyy
1557 volume takes recyclepool from pool when using update volume=xxx from pool
1559 kes Fix encryption deblocking bug, which caused some restored files
1560 to be truncated. This fixes bug #763.
1561 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1562 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1564 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1565 ebl Use btime_t instead of uint64_t in media patch.
1567 kes Optimize the use of the database a bit in the Status dir command.
1568 Only open it when needed, ensure that if any previous database
1569 was opened, it is closed.
1571 kes Correct VolCatBytes bug from media patch.
1572 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1573 in the case of orphaned records.
1574 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1575 and File records in 300K chunks to be more efficient. This
1576 idea came from Juan Luis Frances (if I remember right).
1577 kes Apply Eric's scratch patch that moves a purged Volume to
1578 the RecyclePool. Question: how is RecyclePool set? what
1579 happens to the ScratchPool?
1580 kes Apply Eric's media patch that collects read/write media
1581 times as well as byte counts. This patch requires a
1582 simultaneous upgrade of the DIR and SD. Note, there
1583 should be some way to turn off timing. I'm not sure
1584 times are in Bacula units.
1585 kes Apply Eric's batch-insert patch.
1587 kes Update projects list.
1589 kes Implement Include/Exclude file lists in FD as dlists using
1590 the new dlistString class. This permits efficiently having
1591 large include/exclude lists and completes project Item 25.
1592 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1593 console is authorized to cancel the job. This fixes bug
1595 kes Modify SD so that the VolCatJobs medium record is updated
1596 at the beginning of a Job rather than the end. This
1597 fixes bug #775 where exceeding MaxVolJobs caused jobs
1599 kes Added a mutex around getting and setting Volume information
1600 so that multiple simultaneous jobs will single thread.
1602 Switch to using Subversion
1603 kes Remove src/pygtk-console/ from configure
1605 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1606 plus the entrypoints.
1607 kes Apply patch supplied that corrects debug print
1608 in canceling jobs for max run time. Supplied as
1609 part of bug #621, which was previously fixed.
1611 kes Test on job_canceled() and sd_msg_thread_done inside
1612 loop starting the message thread to avoid a race condition.
1614 kes Remove rl_catch_signal from console.c as it conflicted
1615 with the header definition. Fixes bug #765.
1616 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1618 kes Clarify some stored/acquire messages to indicate if the
1619 problem is with read or append.
1621 kes Fix memory leak with storage ids in cats/sql_get.c
1622 kes Terminate watchdog earlier to avoid reference to released
1623 memory -- reported by Jason Austin.
1624 kes Move closing the database from jobq.c to the director daemon
1625 termination routine. This fixes memory leaks for shadow jobs
1626 (i.e. migration jobs).
1627 kes Free up the unique jobid chain items in migrate.c. This fixes
1628 a memory leak problem.
1629 kes Convert some ugly looking for statements to use foreach_alist
1630 in findlib/find.c. This will facilitate converting the structures
1631 to use dlist (for large include/exclude lists).
1632 kes Fix a bug in the btree.c and btree.h routines, then rename them
1633 rblist and add them to be built in src/lib. Include some new
1634 methods written by Rudolf Cejka that make the code more readable
1635 (hides some of the ugly casting).
1636 kes Add set_next() and set_prev() methods which make the code much more
1637 readable. Also add a new dlistString class that facilitates storing
1638 strings in dlists. To be used in the large include/exclude lists.
1639 kes Make some trivial modifications to lib/tree.h that use rblist
1640 rather than dlist for storing the tree links. This was suggested
1641 by Rudolf Cejka. The result of this is that the restore tree now
1642 uses red-black binary trees rather than simple linked lists. This
1643 should give rather dramatic speed improvements for directories
1644 contining large numbers of directories/files (more than 10000).
1646 kes Fix maxruntime bug #621.
1648 ebl Implement the include JobID in spool file name project.
1649 kes Reorder projects file in order determined by Jan 2007 vote.
1650 kes Implement item #12 on project list -- quick release of FD by
1652 kes Fix open of SQLite3 db where user does not have write permission
1653 so that DIR does not crash. Fixes bug #761.
1655 kes Add back missing @ in Win32 Makefile.
1656 kes Change 'Device not configured to autolabel' from INFO
1658 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1659 which should restart an indefinite # of times.
1660 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1661 other DIR specifications.
1663 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1664 Fix path quoting in SQLite scripts.
1665 Fix problems with SHGetFolderPath.
1667 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1669 kes Fix Job restart on error bug that promotes an Inc to a Full
1670 backup. This should fix bug #755.
1671 kes Add qt-console and first cut of code.
1675 kes Fix Bacula->Documentation link on Win32 to point to index.html
1676 instead of bacula.html. Fixed bug #750.
1677 kes Return JobId in db_get_job_record() when JobId==0. This should
1679 kes Do not release source pointers when restarting a failed job.
1681 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1682 This *should* fix bug #747.
1683 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1686 kes Modify USTORE constructor to set an empty store_source string,
1687 and don't copy the store_source string in a cancel. Hopefully
1688 this will fix Arno's seg fault, bug #744.
1689 kes Add back code to disable conio in configure. Fixes bug #743.
1690 kes Correct the Options scanner in the FD to correctly handle
1691 SHA1 option, which was eating the next option. Reported by
1693 kes Add code to indicate when the SD is spooling, spool wait, and
1694 despooling as requested by Alan Brown.
1696 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob