1 Technical notes on version 2.3
5 kes Fix race condition that drops final block written to volume.
6 This happens in rare cases with multiple simultaneous jobs
8 kes Eliminate more strerror() and replace with bstrerror().
9 kes Remove BSD getopt and replace with unrestricted IBM version
11 kes More tweaks to the mount volume routines to get everything
12 right. Changed variable name from find to have_vol, which is
13 much easier to understand.
14 kes Enhance btimer debug code.
16 kes Fix FD->SD authorization failure, which was due to spurious
17 wakeups from a pthread_cond_timedwait(). Simply check the
18 predicate before continuing. This fixes bug #953
19 kes Add const char where needed (more to do). Remove temp debug code.
21 kes Setup SQLite busy handler before doing queries.
22 kes Don't overwrite error message in check_tables_version.
23 kes Unlock batch insert tables with same calls used elsewhere.
24 kes Allow starting 59 jobs a second.
25 kes Make SD session key more random.
26 kes Add retry for SQLite opening db if it fails.
27 kes Suppress extra error messages during batch insert failure.
28 kes Add jcr to timer packets so if killed message can be sent to job.
29 kes Add JobId to all Dmsg() output.
30 kes Put some FD auth code on dbglvl rather than fixed.
31 kes Return insert attributes error message in db msg buffer to avoid
33 kes Separate batch init error messages.
34 kes Make SD code that contructs attribute insert check string lengths
36 kes If Dir gets an error during inserting attributes, cancel SD.
37 This reduces unnecessary error messages.
39 kes Correct search boolean for getting Volume info
40 ebl Cleanup batch code.
41 kes Back out one small change to the reservation system (reserving a volume).
42 kes Rework how a Volume is mounted. It is now much more intelligent and
43 will always attempt to use any mounted volume if possible and reduces
44 calls to the Director asking about volumes.
46 kes Turn off some code when batch insert not enabled.
47 kes Edit FD name in connect error messages.
48 kes Rework the reservation system to take into account that the Director
49 might give us a Volume that is different from the current one being
50 used, and to ensure that we don't exceed Maximum Volume Jobs.
51 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
52 fatal error with multiple jobs running'
53 kes Add more debug code in reservation system.
54 kes Implement maxvol-test to check bug #947.
56 kes Add code to handle tray monitor separated from Win32 FD.
57 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
59 kes Add missed return in fixing verify bug -- trunk only.
60 ebl Fix a command parser issue causing a director segfault.
61 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
63 kes Increase the max block size to 4MB fixes bug #957.
64 kes ERABT if user sets min block size > max block size. Fixes bug #956.
65 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
66 is not properly mounted (recognized) during a poll.
67 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
68 Job that has differences reports Verify OK.
69 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
71 ebl Add an option to operate on all pools with update vol parameters.
72 This complete the project 20. Patch from Nigel Stepp.
73 ebl Add history support to bconsole when using readline.
74 Using Ctrl-D to exit doesn't update .bconsole_history
75 kes Modify new volume algorithm to use max MediaId for generating next
76 volume number rather than the count of Volumes. This should essentially
77 eliminate the failure rate if some volumes were deleted. Bug #921.
78 kes Begin implemention of Optimize Job Scheduling.
79 kes Implement restore callback that Dirk and I agreed on for bat
80 restore. This fixes bug #928. Restore of backup of zero files fails.
81 kes Fix SQL Catalog logging which broke with new db_escape_string
84 kes Fix bacula_cats.def for new db_escape_string().
85 kes Increase size of name string when FD making connection to SD.
86 May fix bug #953. FD->SD connection failure.
88 kes Add code to help Dan debug 2drive-incremental-2disk test.
89 kes Add code to try to fix bug #908.
90 kes Add waits to multiple exit detection code to try to force pid
91 file to always be deleted.
92 kes Restore good dev.tar.gz to rescue set appropriate binary property.
94 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
95 trying to switch drives by checking for blocking before unblocking.
97 kes Cancel storage daemon in all cases where FD reports error. This
98 should fix virtually all cases of bug #920.
99 kes Fix db_escape_string() for MySQL which did not compile.
101 kes Fix error message that was clobbered when Dir tells SD it does not
102 have write permission on Volume. This should fix a minor point
103 in bug #942, but not the main problem.
104 kes Add code to cancel job in SD if FD connection fails. This should
106 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
107 dvl Pass jcr and db into db_escape_string() to enable better escaping
109 kes Fix migration code to get correct Volume name with multiple volumes
110 by skipping |. Fixes bug #936.
111 kes Implement patch supplied by Landon to fix bug #944 where using
112 TLS with bconsole uses 99+% of the CPU.
113 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
115 kes Move patches into patches directory.
117 ebl Fix bug #946 about "bacula-dir -t" which doesn't works
120 ebl Using "m" in bconsole will show messages like before,
121 and not memory usage.
122 kes Fix bug #935, and probably also bug #903 where files were not
123 restored. MediaId was not properly set in JobMedia record after
126 kes Suppress chown and chmod error messages if the FD is not running
129 kes Apply Martin Simmons' patch that should turn off the new API usage
130 when batch insert is turned off allowing building on older
132 kes Add ./configure search in qwt-qt4 for qwt package
134 kes Bacula is now free of 3rd party GPL copyrighted code!
136 kes Add guid_to_name.c/h which replace idcache.
137 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
139 ebl Detect if new PosgreSQL batch insert API is present.
140 kes Correct incorrect mempool call causing Director crash. Occurs on
141 systems without va_copy().
142 sb Update spec files for 2.2.1 release
144 kes Fix memory pool call in ua_output.c. bug #934.
145 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
146 Add test program to fnmatch.c
148 kes Integrate patch to README.vc8 from
149 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
150 edit it to get it into Unix patch format.
151 kes Implement mkpath.c to replace old FSF makepath.c
153 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
155 Release Version 2.2.1
157 kes Update POTFILES.in
158 kes Cleanup a few underquoted AC_DEFUNs in configure
159 kes Apply patch from Martin Simmons that adds a test for va_copy to
162 kes Fix bug #921 by increasing the number of tries to create a new volume
164 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
165 can be called multiple times. Implement a version for machines
166 without va_copy() that gets a big buffer.
168 kes Integrate more portable zone offset code into bsmtp.c
169 Submitted by Attila Fülöp.
171 kes Fix bad SD->FD return status reported by
172 (James Harper) <james.harper@bendigoit.com.au>
173 ebl Fix a bug in read_close_session which return random status
174 thanks to James Harper
176 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
177 and directory names during restore of single file/directories.
178 kes Add sanity checks to .sql command when string is empty. Hopefully
179 that will resolve Dirks Director crash.
181 kes Apply patch submitted by Martin Simmons that corrects a seg fault
182 in the bsmtp chat subroutine when debug is >= 10.
184 kes Fix Director crash when running bat SQL queries.
185 kes Add David's notes on Item 8: Copy pools.
187 kes Rework projects file to be current and ready for a vote.
188 kes Enhance lex scanner error message.
190 kes Tweak LICENSE file to mention BSD code.
191 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
192 if specified on the ./configure.
193 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
194 This class is intended to allow us to open a second bsock to the
195 Director while in the restore subdialog.
197 kes Fix configure to create bat Makefile before creating dependencies.
198 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
199 kes Add a tooltip to the tray monitor.
200 dvl Set the Director's PID file before dropping privs. This fixes
203 kes Update AUTHORs file
204 kes Increase the default max concurrent jobs to 20 in FD and SD to
205 correspond with the default .conf files.
206 kes Rewrite the Win32 service routines. This eliminates the 3 copies
207 some different, of the same file created by RN when porting the
209 kes Rearrange some of the Win32 directories and the placement of the files
211 kes Set DEVELOPER flag in version.h
213 ========================================================================
214 Release Version 2.2.0
216 kes Apply a second doc patch from Marc.
217 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
218 improves the tips section that discusses how to setup multiple
221 kes Update bat README file.
222 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
223 corrects a typo in the Recycle status check in db_find_next_volume().
224 This will probably fix a number of annoying problems with multiple
226 kes Modify most of dird/msgchan.c to use bsock class calls rather than
227 bnet calls -- no functionality change.
229 kes Modify the Verify output to specify if files are missing on
230 the Volume(s) or disk. Fixes confusion in bug #916.
231 kes When more than one Volume is read in a migration job, the last
232 Volume bytes reported are from the last read volume rather than
233 the last written volume. Fixed. This fixes bug #910.
234 kes Fix display of Recycle flag after update volume=foo recycle=yes.
235 It previously printed New Recyle flag is: no. This fixes bug
238 kes Correct seg fault when switching tape drives during restore.
239 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
240 be used until after 2.2.0 release.
242 kes Remove fnmatch() in SD that permitted wild card specifications.
245 kes Fix %g in filename returned by SQL for browse tree reported by
247 kes Fix configure so that it puts config.out in the cwd rather than
249 kes Attempt to fix the locking problem reported by Eric in bug #906.
250 kes Make berrno class to leave errno unchanged after constructor call.
251 kes Make bnet_server use the heap rather than the stack to allocate
252 its socket fd pointers to avoid a crash at termination. Problem
253 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
255 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
256 and putting it in depkgs-qt along with Qt4.3.
258 kes Rework code in acquire.c that switches drives for reading when
259 the Media Type does not match. This should fix bug #906
261 ebl Fix a director segfault during job setup #907
262 kes Correct seg fault in postgresql when first operation returns no
263 rows. Fixes Dirks File browser problem seg fault with bat.
265 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
266 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
269 kes Implement PopUp YES/NO dialog for bat.
271 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
273 kes Correct RunScript to terminate job in FD on failure.
274 kes Change abort_on_error and AbortJobOnError to fail_on_error
275 and FailJobOnError in RunScripts.
276 kes Minor tweaks of code formating in RunScripts, principally to
277 avoid depassing 80 columns.
279 kes Eliminate one #ifdef Win32 in bsmtp
280 kes Implement grow tool to grow a file for testing very large databases.
281 kes Add big-vol-test to test Bacula seeking with > 5GB.
284 kes Modify find_next_volume() to return all values in Media record.
285 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
289 kes Update Release notes
291 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
292 Warning, in previous beta version, all media get from scratch keep their
295 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
296 This should fix bug #842. Made a note to look at removing the temp
297 files at the end of the install.
298 kes Add ability to mount and unmount a file device providing it is
299 marked as being removable and has the appropriate mount and unmount
300 commands defined in the Device resource. This fixes bug #830.
301 kes When applying a storage override, release all previous storage
302 definitions rather than just prepending the new storage.
303 This should prevent a good deal of confusion.
305 kes Implement ./configure search for qwt libraries.
307 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
308 Win32 FD. This should fix bug #893.
309 kes Remove an unnecessary beep in Win32 init code.
310 kes Update copyright dates in Win32 executable about boxes.
311 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
312 code with a BSD getopt.c and getopt.h.
313 kes Remove sched.h from the Win32 compat directory -- not used.
314 kes Remove the Exit menu item from the Win32 tray monitor. If you really
315 need to shut it down, do it through the services panel or the command
317 kes Remove some inappropriate Bacula FSFE copyrights.
318 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
319 kes Fix regress config non-portable test as pointed out by
320 Florian Heigl <florian.heigl@gmail.com>
321 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
322 as pointed out by Florian Heigl <florian.heigl@gmail.com>
324 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
325 Reported by Frank Sweetser.
329 kes Fix client-only build.
330 kes Integrate client-only fixes for bsys (initgroups) and conio from
331 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
332 kes Make arguments to get_scratch_volume() in same order as other
334 kes Rework the prune_volumes() subroutine so that after purging and
335 no volume found in desired pool, it will check for a scratch
336 volume. This prevents recycling the whole scratch pool.
337 kes Add code to status storage to print boffset_t (largefile support).
339 kes Move qwt (Graphics libarary for Qt4) to depkgs.
340 kes You now need a --with-qwt=<dir> to be able to build bat.
341 kes Update src/win32/cats/bacula_cats.def to include the new
342 db_get_query_dbids() call on Win32.
344 kes Correct a problem when selecting a scratch volume and moving
345 it to another pool that lost some columns.
346 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
347 kes Enhance Autochanger error messages to include Volume and device name.
348 kes Rework prune_volumes() code to take account of InChanger flag,
349 and to handle recycling volumes going to the Scratch pool and
350 current pool because the RecyclePool directive.
351 kes Implement a better and more efficient db_get_query_dbids() to
352 handle creating and passing back a list of DBIds.
356 kes Start work on new more efficient DBId subroutine. First use
357 will be for recycling volume to Scratch inchanger.
358 kes Increase number of JobIds in pruning from 1000 to 10000.
359 This to be replaced by above routine.
360 kes Begin implementation of building Qt4 on Win32.
361 kes Correct typo in fix I added for bad TLS shutdown.
362 kes Pull 2.0.3 patches into patches directory.
363 kes Update Release notes. Include qt-console in line count.
364 kes Update Projects file.
366 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
367 bug in migration code where a job that spanned two volumes
370 kes Implement new BST_DESPOOLING blocked state. Change from locking
371 during despooling in SD to blocking. This means that other threads
372 can work with the device structure, in particular the reservations
373 system while despooling.
375 kes Fix return in reservation message queue that missed clearing
376 the jcr lock (implemented 26Jun07 below).
377 kes Rename a number of dev methods to make locking function names
379 kes Document locking in lock.c. Move lock structures to new file
382 kes Move reservations message lock to lock jcr only this
384 kes Move main SD locking code into lock.c (new file).
385 kes Update Win32 build to include lock.c
389 kes Dirk committed the qwt library code for drawing graphs in bat.
390 kes Tweak install of qwt so that it is integrated with ./configure.
392 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
393 out by Eric (my typo).
394 ebl Fix configure.in to get batch mode enable
395 kes Return correct string from authenticate.cpp in bat when connecting
397 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
398 spurious line drops when using TLS.
399 kes Do not file reparse points when restoring a file that already
402 kes Implement Windows reparse points -- similar to directories, but
403 we do not descend into it. This is a first cut. They seem to
404 be backed up, but restore is not yet tested.
405 kes Remove restore_blocking in tls code when shutting a socket to leave
406 it in blocking mode. Hopefully this will fix the encryption bug
407 reported by Frank Sweetser.
408 kes When opening a file for backup, tell the OS that we are going to
409 read it sequentially -- optimization.
410 kes Change variable names in authenticate_director() to not conflict
411 with member names in bat. Caused great confusion with compiler,
414 kes Queue openssl error messages in case of comm problem.
415 kes Do shutdown() call if socket terminated.
416 kes Remove some duplicated code in tls.c
417 kes Move more of the bsock member variables into private and access
419 kes Add Frank Sweetser's tls-test to the regression suite.
421 kes Add Swedish sv.po file
423 kes Don't print clock skew message in FD if less than 3 seconds diff.
424 kes Add a bit of VSS info to status client.
425 kes Implement a first cut of Vista VSS, using Win2003 code.
429 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
430 loaded tape but uses first drive).
431 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
432 This was indeed a Win32 issue.
434 kes Simplify search of autochanger for in-use Volume.
435 kes Fix exit condition of check for in-use volume. kes Remove
436 inappropriate my_postgresql_free_result() in db_close()
438 kes Fix bad return in FD when encryption signature not found.
439 Probably caused a crash.
440 kes Inhibit missing encryption signature error messages for
441 file types where no signature computed.
442 kes Correct inverted check on autochanger in reservation system.
443 kes Tweak debug code in autochanger reservation.
445 kes Add some additional locking in the cats directory in subroutines
446 that modify packet variables called from batch insert.
447 kes Rework how dcrs are allocated. new_dcr() can now be called
448 with an existing pointer, and it will simply clean it up.
449 This allows the reservation system to test various different
450 devices, and will permit easy device changes.
451 kes A bunch of changes all over to handle new new_dcr() calling
453 kes Work more on the Volume management in the SD. Remember Volumes
454 for tape drives and for autochangers (even virtual disk changers).
455 kes When looking at the Volume list to reserve a drive, handle
456 autochanger names correctly by interating through the changer
457 devices. Also call the Director to see if a Volume is suitable
459 kes Fix some bugs in bscan. Make sure all media records are written.
460 Make sure that valid JobMedia records are written for disk files.
461 Previously they were completely wrong.
462 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
463 that the URLs don't change and so that the developers will all
464 work off the same copy. Rebuild from scrach.
465 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
469 kes Fix seg fault in FD from incorrect digest size.
470 kes Fix argument to non-OpenSSL crypto.c subroutine.
474 kes Remove a few malloc()s from the encryption code.
475 kes Use the class calls to bsock in filed/backup.c and restore.c in
476 place of the old bnet_xxx code.
477 kes Implement code that does an on the fly calculation of the
478 signing digest during restore of encrypted files. It makes
479 a best guess at the algorithm, and if it is not correct, will
480 then revert to the old code which reads the file after it is
482 kes Implement at least one missing crypto stream in stream_to_ascii()
483 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
484 #877 where a reload with bad syntax causes Dir to exit.
486 Cut: 2.1.14 beta (not released)
488 kes Do not free a volume on a tape drive until another volume is
489 mounted and read, or the autochanger unloads the volume.
490 This should help the SD re-use volumes that are already mounted,
491 and should fix bug #886.
492 kes Apply patch from user brettedgar that allows gnome2-console include
493 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
494 kes Apply patch from Lucien Weller that fixes day of week calculation
495 because of DST flag problem. Fixes bug #887.
497 kes Move find_next_appendable_volume() to after acquiring a valid device
498 in reserve.c. This fixes bug #864 -- confirmed by reporter.
500 kes Unable to reproduce bug 872. However added additional testing for
502 kes Bug #874 resolved by documenting SQLite limitations.
503 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
504 kes Bug #881 resolved by removing typo in mtx-changer script.
505 kes Made Frank Sweetser's wiki the official Bacula wiki with his
506 approval. Added a link to the wiki on the web page, and implemented
507 a backup from http://paramount.ind.wpi.edu
509 kes Fix update allfrompool to pass pool name.
511 kes Convert to pure GPL v2 license.
512 kes Fix sscanf problems reported by Peter Buschman that caused
513 a bus error on Solaris.
514 kes Rework (simplify) the select prompt in bat.
515 kes Move get_jobid_from_tid() into lib and create a
517 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
518 should definitely fix the problem of lost error messages in the
520 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
521 kes Eliminate tcpd.h from the project. Enclose the #include from the
522 library with extern C ...
523 kes Add print of signal name when a signal is trapped.
527 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
529 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
530 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
531 makes SQLit3 run 30 times faster, though a bit less safe.
532 kes Implement --with-batch-insert in configure and detection of thread
533 safe libraries. It is on by default, but turned off if no thread
534 safe library (e.g. SQLite 2) is available.
536 kes Fix Bacula PostgreSQL buffer overruns.
537 kes Do better checking for NULL results returned from PostgreSQL;
538 implement retry for failed queries; clear results buffer after
539 failed query. Hopefully this will correct the PostgreSQL failures.
541 kes Implement algorithm to handle only one appendable volume with
542 Prefer Mounted Volumes = no.
543 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
544 returned from a query.
545 kes Make volume lock recursive.
546 kes Implement an additional volume reservation algorithm that
547 starts by considering all reserved volumes then uses the
548 old brute force algorithm of searching the resources to
549 find a suitable device.
550 kes Add new reservations debug code and refine the old code.
551 kes Update the win32/dll/bacula.defs file.
553 kes Tweak reservations algorithm to permit a few more cases, i.e.
554 volume reserved, but on different drive, ...
555 kes Enhance SD status to include Pool and Media Type for drive in a
556 more readable format (a bit longer).
557 kes Fix PostgreSQL double free.
559 kes Minor refactoring of restore decryption code.
560 kes Add code to smartall.c to detect double free of a buffer.
562 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
563 so that bsmtp will create a correct email address (mailbox only).
564 kes Modify 'memory' command so that the buffers are listed as 'In use'
565 to avoid confusion with Orphaned buffers.
566 kes I reworked the OpenSSL include/lib flags to be handled in
567 the standard Bacula way, which should fix bug #863 concerning
568 non-standard OpenSSL libraries.
570 kes Implement Help Browser window for bat.
571 kes Fix reload bug that reset StorageId to zero.
573 kes Fix TLS #ifdefing when TLS turned off.
574 kes Ensure that when labelling a tape with Slot=0 that InChanger
576 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
578 kes Add StartTime to final uar_sel_jobid_temp query so that we can
579 add DISTINCT (required by PostgreSQL).
580 kes Implement BSOCK authenticate_director() method. Eventually will
581 authenicate all daemons.
582 kes Move several more functions into the BSOCK class.
584 kes Add code to tell the OS that we no longer need a cached
585 file that we were reading. In findlib/bfile.c. Also,
586 only cache files that we are reading. Thanks to
587 Tobias Oetiker <tobi@oetiker.ch> for the idea.
588 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
589 kes Implement script to automatically generate cats and dll .def
591 kes Update README.mingw32 to include new .def file generation.
592 kes Correct typo in UTF-8 error message as reported by:
593 jhernandez <julianhernandez@gmail.com>
594 kes Add additional sm_check() code on debug level 1.
595 kes Set default debug level to 1.
596 kes Trap SIGABRT in attempt to get traceback.
598 kes Reduce bat connect timeout from 30 to 15 seconds.
599 kes More restructuring and implementing BSOCK class in place of
601 kes Remove a few unnecessary malloc() tests in crypto code.
602 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
603 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
604 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
606 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
608 kes Fix Verify InitCatalog. The attributes were not pointing to the
609 correct saved location.
610 kes Implement message callback so that GUI is sure to get all
611 daemon messages. Currently displayed in a dialog in bat.
612 kes Ignore SIGUSR2 (Bacula timer) in bat.
613 kes Apply regress patch from bug #859 to allow regress to work
614 with Solaris compiler.
616 kes Begin adding TLS support to bat.
617 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
618 clean up lex.c and make it more readable.
620 kes Move more bnet functions into the BSOCK class.
621 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
622 kes Complete change of berrno strerror() method to bstrerror()
626 kes Cleanup incorrect email addresses in bsmtp.
627 kes Make bat display initial messages rather than discard them.
629 kes First cut of adding .mod to the run command.
630 kes Implement auto display of messages in bat.
631 kes Enhanced preferences to allow all Bacula output to be
634 kes Try to make bsmtp date routines more generic.
635 kes Fixed bug #856 autochanger documentation.
636 kes Rework bsmtp date editing for Win32. This fixes bug #854.
637 kes Add new cats entry point so Win32 builds.
639 kes Attempt to fix bsmtp date editing on OSes without %z editing.
641 kes Do better checking for the MySQL 64 bit libraries looking for both
642 .a and .so libraries.
643 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
644 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
645 kes Require the thread safe version of MySQL during configure. Thanks
646 to Andre Noll for pointing this out.
647 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
648 continuing in migration code.
649 kes Apply implementation of tray-monitor font derived from gnome-console
650 submitted by Andreas Piesk <a.piesk@gmx.net>
652 kes Eliminate important memory loss in SQLite
653 kes Fixed the batch insert MySQL thread specific data that was not
654 being freed. See cats/mysql.c:db_thread_cleanup().
655 kes Fix restore before command.
656 kes Convert old hdr.name to name() in a few places.
657 kes Implement update jobid command.
658 kes Return all time_t dates in db_get_job_record()
659 kes Stop watchdog in SD earlier.
660 kes Put Pool just after Storage in please mount message.
661 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
664 kes Update the po files.
665 kes Fix Verify InitCatalog by making it cache attributes.
667 kes Change name bacula-bat to bat for man 1 page to correspond to
669 kes Check for client and store NULL pointers in status command. This
671 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
672 kes Fix sign extended editing of %p.
673 kes Clean out a little old #ifdefing in cats/mysql.c
675 kes If time diff between DIR and FD is more than 600 seconds convert
676 INFO message to WARNING.
677 kes Implement heap size display in status for all daemons.
678 kes Attempt to fix MySQL db open memory loss (not successfull).
679 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
680 kes Eliminate memory loss in MySQL (possibly other SQLs) during
681 Query. This looks like a MySQL but but by doing extra releases,
682 the memory goes away. This should fix bug #847.
684 kes When backup fails, cancel SD before waiting for sd termination.
685 kes If SD is waiting for FD to connect during cancel, wake up the
687 kes Fix fsf code so that errno is correctly reported.
688 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
690 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
691 so that Bacula doesn't later stumble into a seg fault.
692 kes Use the term Restore Client in the restore Job report.
693 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
694 the original job's FileSetId.
695 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
696 spooling in migration jobs. Not yet tested.
697 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
698 reading conf file from a pipe. However, do it with open_bpipe()
699 rather than popen. Not yet tested.
701 kes Fix an ugly bug where the VolCatBytes were getting updated
703 kes Implement bconsole memory command that prints current memory
704 usage, plus smartalloc dump.
705 kes Clarify some error messages in backup, admin, and migrate.
706 kes Shrink label dialog to smaller size.
707 kes Invert Cancel OK buttons on restore to be OK Cancel.
708 kes More strerror() to bstrerror() conversions.
710 kes Start implementing bstrerror() in place of strerror().
711 kes Stripping path -- seems to work.
713 kes Prevent door and port files from being restored (mostly
715 kes Free an unreleased buffer in compat code.
716 kes Change console Job name from *Console* to -Console- to eliminate
717 Win32 filename problems. Put Win32 path separator when creating
718 Console file. This fixes bug #846.
719 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
721 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
723 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
724 to force Win32 error message.
726 kes First cut strip path. The data should be passed to the FD,
727 but nothing is done with it yet.
728 kes Enhance the digest and signature routines in the crypto
729 library to accept a JCR and to use it to print error messages
730 so that they will go in the Job report rather than the daemon's
732 kes Simplify some of the verify signature code.
733 kes Simplify a few of the alternative returns in the signature
736 ebl Use only POSIX regex instead of GNU regex in breg.c for
737 File relocation. It fix broken freebsd compilation.
738 kes Convert all other Dir files to use new ua class message
740 kes Tentative fix for missing digest signature in bug 807.
741 kes Correct handle problem in new win32_ftruncate routine.
742 kes Convert ua_purge.c and ua_update.c to use new ua class
743 message routines for bat.
745 kes Correct incorrect installation of LICENSE in Win32 installer.
746 kes Display LICENSE at the beginning of the Win32 install.
747 kes Attempt to correct the need for the png files to be installed
749 kes Reapply my bat.conf install script in qt-console. I think I
750 editted bat.pro instead of bat.pro.in and it was lost.
751 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
752 the /var/lock/subsys for subsysdir. Also corrects typos in the
755 kes First cut update job.
756 kes Correct configure to include qmake of src/qt-console directory.
758 kes Make restore job yes/mod/no print in one command so GUI works.
759 kes First cut implementing backup and restore client.
760 kes Correct editing in Verify output that caused a seg fault.
762 kes Insure that bat.conf is not overwritten during installation.
763 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
764 while I was implementing migration in March 2006 !
766 ebl Cleanup file relocation, using char *RegexWhere instead of
767 char *where + bool where_use_regexp
768 kes Update some manpages and add bat manpage.
769 kes Make a first cut at converting bacula.spec.in for bwx-console
771 kes Apply patch from John Goerzen to add hostname as fourth argument
772 to make_catalog_backup script.
773 kes Fix typos I introduced into bsmtp.c
774 kes Make pm_strxxx() routines handle input of NULL pointer. This
775 is to protect from NULL pointers returned from SQL databases.
776 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
777 kes Add more debug to FIFO code -- fix fifo regression test.
779 kes Implement posix_fadvise in FD, and for reading spool files in SD.
780 kes Add thread timer to bnet_connect() to break from OS if wait time
783 kes Update Win32 build to include new files, new symbols, and
785 kes Implement socket level heartbeat (tcp_keepidle)
786 ebl Commit File relocation patch
787 kes Make bat have 'make install' target.
788 kes Warn during install if old gnome-console binary found.
789 kes Warn during install if old wx-console binary found.
790 kes Add -8 option to bsmtp command line to add content type utf-8.
791 Fixes bug #809. (Character coding problem in bsmtp).
792 kes If < is found in target (from, to, cc) then do not enclose the
793 target in < > in bsmtp. Fixes bug #772 (malformed address).
794 kes When printing certain items in dbcheck, stop after 300000.
795 Fixes bug #822. (dbcheck loops).
796 kes Incorrect status in Dir after waiting for mount with poll set.
799 kes Extend idea of Prefer Mounted Volumes to mean a volume about
801 kes Print waiting to reserve a device every 5 mins.
803 kes Don't call close_part in label.c if tape and relabel.
804 kes Don't free volume if busy in close() -- should help with
806 ebl Fix #824 RunScript bug (After script could be execute twice)
807 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
808 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
809 Add a regression script to test RunScript
811 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
814 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
815 deprecated. No additional bugs will be fixed, and they will be dropped
816 in a future release (probably 2.4.0).
817 kes Change name of wx-console to bwx-console to make it more Bacula
819 kes Change the name of gnome-console to bgnome-console to make it
822 kes Some time in March, a Feature Request with patch from Jorj Bauer
823 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
825 The ability for the director to validate a Client (FD) CN against
826 an arbitrary set of patterns rather than the hostname, with
827 A new 'TLS Allowed CN' set of directives which are implemented
828 in the Client resource. Then pattern matching is used in place
829 of hostname matching against the Certificate's CN. As an example, we
830 have certificates which (a) use a local CA, and (b) have a CN of the
832 kes Add new/changed entry points to Win32 build
833 kes Create unaccepted-projects for projects that are not accepted.
834 kes Simplify locking in the reservations system.
835 kes Add more debug code in reservations.
836 kes Make sure error condition on reserving a volume is handled correctly.
837 kes Correct handling of volume_in_use.
838 kes Correct handling of initializing a device.
839 kes Move handling of broadcasting releasing a device into release_device().
840 kes Correct attaching dcr to dev so that it is only done if device
841 is properly initiated.
843 kes Locking debug level tweaks in SD.
844 kes Tweak new Volume code.
846 kes Add exec external-command [wait-seconds] to bconsole. This
847 executes the external-command. Note! normally external-command
848 should be enclosed in double quotes.
849 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
850 it should normally be off in a production system.
852 kes Implement die command for SD so that we can force it to dump.
853 kes Implement SD lock debug code.
854 kes Implement new algorithm for keeping Volume list in SD. It
855 is now owned by the device.
857 kes Implement new code for freeing in use volumes that should
858 resolve if not all, some of the problems of multiple drive
859 tape conflicts described in bug 801.
861 kes Fix gui/bacula-web/images files in svn.
862 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
864 ebl Fix a bug in batch mode (in string escape)
865 kes Correct migration prune SQL typo that crept in in a
868 kes Move bnet_despool() into class in bsock.c
869 kes Modify job report to include director name and Build OS.
870 kes Move drop root privilege and check_catalog() before fork.
871 kes Add update database scripts (version 9 to 10) to updatedb directory.
873 ebl Check size and age of each file after its backup to see if
874 it has changed during backup, if 'checkfilechanges' is set.
875 The FD will do an extra check (stat(2)) after
876 each file backup. mtime, ctime and size are compared with
877 'before backup' information. If time or size mismatch, an
878 error message will be generated. You must upgrade FD to use it.
880 kes Make database name and user configurable
881 --with-db-name=xxx --with-db-user=xxx
882 kes Add back database type to message.c for debugging.
884 kes Implement dir_sql() which issues an SQL query.
885 kes Modify bat medialist to use dir_sql() and do some minor C++
886 formatting as well as eliminating a number of pointers, simplifing
889 kes Fix some of the mtx-changer grep commands for tape label readers.
890 kes Convert a number of bsendmsg into the appropriate send/warning/error
892 kes Suppress the using database message in the .sql command.
893 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
895 kes Add context menu for floating a window.
896 kes Some minor cleanup and name changes in qt-console
897 kes Add doing mt setblk 0 in Win32 mtx-changer.
898 kes Apply Martin's bug fix to move definition of ENODATA for
900 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
903 kes More pruning cleanup.
904 kes Turn on wait_for_drive by default in mtx-changer.
905 kes Turn on Batch insert code by default as it now passes regression.
906 kes Add ./configure --enable-bat to enable building of Bat.
907 No install yet though.
909 kes Implement a new .sql command for bat.
910 kes Implement code to turn off pruning in obtaining the next volume.
911 Pruning is turned off for the status dir command, but turned on
912 for SD requests and for the list nextvolume command.
914 kes Correct Qmsg() that was not updated correctly when committing a
915 previous change (probably the recent TLS patch).
917 kes Write new subroutine is_volume_purged() that explicitly checks
918 if the Volume is purged, and if so marks it as such. This should
919 resolve problems reported about needing to mount twice to recycle
921 kes Rewrite pruning algorithm to do more work in the SQL engine, and
922 to pass a list of JobIds to be deleted to SQL. Also, minimize the
923 amount of duplicated code.
924 kes Do volume pruning only for the Media Type desired (reduces pruning time
925 if multiple Media Types are in the same pool).
926 kes Implement more detailed info in the Job report for the Bacula version
928 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
930 ebl Add bbatch tool to bench database and insert mode.
931 Fix sql quote stuff in batch mode
932 Fix sql stuff for mysql
934 kes Correct problems with am/pm scheduling. Fixes bug #808.
935 kes Implement new prunning code that prunes up to 1000 jobs at
936 the same time. The same technique can be applied to a number
937 of other prune/purge subroutines.
938 kes Add an insanity check when starting a new tape job to ensure
939 that the tape position has not been changed. If so fail the
941 kes Fix Win32 build for dlls to add the folllowing:
942 src/lib/bsock.c -- new file with new entry points
943 src/lib/dlist.c -- new entry points
944 src/cats/sql_create.c -- new entry point
945 src/cats/sql_cmds.c -- new DATA item exported
947 ebl batch mode cleanup bscan-test is ok now.
948 kes Implement SD code to check length of disk volume before appending.
950 kes Correct return status on db_batch... routines.
951 kes Add call to db_write_batch_file_records() to migration code.
952 ebl Fix AfterJob timing
953 kes Move the checking of the database in initializion of the Director
954 to after we drop privileges. This avoids the need for both root
955 and bacula access to the DB.
956 kes Correct a misplaced variable definition in src/filed/backup.c
957 kes Correct how the new batch insert db_create_attributes_record()
958 uses the arguments. Caused a seg fault in bscan.
959 kes Implement lock() and unlock() methods in DEVICE class.
960 Implement block() and set_block(xx) methods in DEVICE class.
961 kes Modify bnet_connect() so that it uses time() to check for the
962 wait time expiring (on some OSes, some system calls may not
964 kes Modify Verify to obtain the previous JobId when it is actually
965 running rather than at schedule time (as it was in 1.38.x).
966 kes Fix src/job.c to handle MaxWaitTime correctly. This should
968 kes When checking pid in pid file, continue running if the pid is
969 the same as ours. This occurs on IRIX after a system crash.
972 kes Extend new GUI API.
973 kes Make the ua structure a class, and implement send_msg(),
974 error_msg(), warning_msg(), and info_msg().
976 kes Apply fix from for building wx-console on the Mac from
978 kes Implement new select mechanism for GUI programs.
979 kes Reorganize initialization of stackedWidgets in bat.
981 kes Add updated nagios plugin supplied by Christian Masopust.
983 kes More bat implementation.
984 kes File migrate bug with Pool Occupancy using mediaid instead
985 of jobids. Fixes bug #795.
986 kes Fix orphaned buffers in filed backup and verify due to
987 crypto buffers not freed during errors. Fixes bug #789.
988 kes Extend new GUI api code to tree commands.
989 kes Ensure that tree and dot commands check console ACLs.
990 kes Permit marking directory with trailing slash.
991 kes Allow 20 console connections (instead of only 10).
993 kes Add smartctl call to bacula-sd.conf as an example of getting
996 kes Modify jobq.c to let simultaneous restore jobs run. This may
997 cause them to fail if they cannot get a drive.
998 kes Add Client Connect Wait to Storage daemon to permit users to
999 modify the time the SD waits for a FD connection.
1001 kes Correct virtual changer check which was backwards. This caused
1002 volumes to be unloaded into slots already occupied.
1004 kes Apply Command ACL filter to JobId list in restore command.
1005 kes Correct typeo in var.c patch.
1007 kes Don't let Bacula prune File or Job records for the current Job.
1008 kes Fix variable substitution pad + inc bug reported (with patch)
1011 kes Correct SQLite log table index as reported by Luca Berra.
1013 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1015 kes Begin implementing new comm signals for API.
1016 kes Fix a few places in lib/message.c where the open fd may
1018 kes Continue implementing lib/bsock.c (real class). Make jcr,
1019 who, host, and port private. There are new methods to access
1020 them for non-class use. This required touching a number of files.
1022 kes Add LANG=C to autoconf/randpass so it works with languages other
1023 than English. Fixes bug #788.
1025 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1027 You will not be able to generate Include/Exclude list any more.
1028 It will be fixed soon.
1029 If you want to use this, you can apply
1030 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1032 kes Restore of sockets created false error messages because Bacula
1033 no longer restores sockets, but the code was still trying to
1034 set the attributes on a non-existent file. Reported by a user.
1035 ebl finish RecyclePool feature
1036 Media will takes Pool.RecyclePool
1037 when moving from Scratch to a Pool or when user will do
1038 update volume=xxx frompool
1039 To use it, add RecyclePool = aPool to your Pool resource
1042 RecyclePool = Scratch
1046 kes Expand new BSOCK class adding signal() and new BNET signals.
1047 kes Begin enhancing the dot commands adding a new API function
1048 that returns more information and will make it easier
1049 to interface to the Director from a program.
1051 kes Make DEVICE fd private. Its new name is m_fd, and can be
1052 obtained with dev->fd() outside the class. This is the
1053 first of many DEVICE members to be made private.
1054 kes Implement Michael Renner's idea on having a virtual disk
1055 changer. I made some minor modifications (e.g. I did not
1056 implement the Virtual Changer directive, but simply set
1057 the Changer Command to an empty string.
1059 kes Implement a BSOCK send() method that writes the whole record
1060 in a single write() request rather than in two.
1061 ebl add update volume=xxx recyclepool=yyyy
1062 volume takes recyclepool from pool when using update volume=xxx from pool
1064 kes Fix encryption deblocking bug, which caused some restored files
1065 to be truncated. This fixes bug #763.
1066 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1067 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1069 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1070 ebl Use btime_t instead of uint64_t in media patch.
1072 kes Optimize the use of the database a bit in the Status dir command.
1073 Only open it when needed, ensure that if any previous database
1074 was opened, it is closed.
1076 kes Correct VolCatBytes bug from media patch.
1077 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1078 in the case of orphaned records.
1079 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1080 and File records in 300K chunks to be more efficient. This
1081 idea came from Juan Luis Frances (if I remember right).
1082 kes Apply Eric's scratch patch that moves a purged Volume to
1083 the RecyclePool. Question: how is RecyclePool set? what
1084 happens to the ScratchPool?
1085 kes Apply Eric's media patch that collects read/write media
1086 times as well as byte counts. This patch requires a
1087 simultaneous upgrade of the DIR and SD. Note, there
1088 should be some way to turn off timing. I'm not sure
1089 times are in Bacula units.
1090 kes Apply Eric's batch-insert patch.
1092 kes Update projects list.
1094 kes Implement Include/Exclude file lists in FD as dlists using
1095 the new dlistString class. This permits efficiently having
1096 large include/exclude lists and completes project Item 25.
1097 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1098 console is authorized to cancel the job. This fixes bug
1100 kes Modify SD so that the VolCatJobs medium record is updated
1101 at the beginning of a Job rather than the end. This
1102 fixes bug #775 where exceeding MaxVolJobs caused jobs
1104 kes Added a mutex around getting and setting Volume information
1105 so that multiple simultaneous jobs will single thread.
1107 Switch to using Subversion
1108 kes Remove src/pygtk-console/ from configure
1110 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1111 plus the entrypoints.
1112 kes Apply patch supplied that corrects debug print
1113 in canceling jobs for max run time. Supplied as
1114 part of bug #621, which was previously fixed.
1116 kes Test on job_canceled() and sd_msg_thread_done inside
1117 loop starting the message thread to avoid a race condition.
1119 kes Remove rl_catch_signal from console.c as it conflicted
1120 with the header definition. Fixes bug #765.
1121 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1123 kes Clarify some stored/acquire messages to indicate if the
1124 problem is with read or append.
1126 kes Fix memory leak with storage ids in cats/sql_get.c
1127 kes Terminate watchdog earlier to avoid reference to released
1128 memory -- reported by Jason Austin.
1129 kes Move closing the database from jobq.c to the director daemon
1130 termination routine. This fixes memory leaks for shadow jobs
1131 (i.e. migration jobs).
1132 kes Free up the unique jobid chain items in migrate.c. This fixes
1133 a memory leak problem.
1134 kes Convert some ugly looking for statements to use foreach_alist
1135 in findlib/find.c. This will facilitate converting the structures
1136 to use dlist (for large include/exclude lists).
1137 kes Fix a bug in the btree.c and btree.h routines, then rename them
1138 rblist and add them to be built in src/lib. Include some new
1139 methods written by Rudolf Cejka that make the code more readable
1140 (hides some of the ugly casting).
1141 kes Add set_next() and set_prev() methods which make the code much more
1142 readable. Also add a new dlistString class that facilitates storing
1143 strings in dlists. To be used in the large include/exclude lists.
1144 kes Make some trivial modifications to lib/tree.h that use rblist
1145 rather than dlist for storing the tree links. This was suggested
1146 by Rudolf Cejka. The result of this is that the restore tree now
1147 uses red-black binary trees rather than simple linked lists. This
1148 should give rather dramatic speed improvements for directories
1149 contining large numbers of directories/files (more than 10000).
1151 kes Fix maxruntime bug #621.
1153 ebl Implement the include JobID in spool file name project.
1154 kes Reorder projects file in order determined by Jan 2007 vote.
1155 kes Implement item #12 on project list -- quick release of FD by
1157 kes Fix open of SQLite3 db where user does not have write permission
1158 so that DIR does not crash. Fixes bug #761.
1160 kes Add back missing @ in Win32 Makefile.
1161 kes Change 'Device not configured to autolabel' from INFO
1163 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1164 which should restart an indefinite # of times.
1165 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1166 other DIR specifications.
1168 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1169 Fix path quoting in SQLite scripts.
1170 Fix problems with SHGetFolderPath.
1172 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1174 kes Fix Job restart on error bug that promotes an Inc to a Full
1175 backup. This should fix bug #755.
1176 kes Add qt-console and first cut of code.
1180 kes Fix Bacula->Documentation link on Win32 to point to index.html
1181 instead of bacula.html. Fixed bug #750.
1182 kes Return JobId in db_get_job_record() when JobId==0. This should
1184 kes Do not release source pointers when restarting a failed job.
1186 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1187 This *should* fix bug #747.
1188 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1191 kes Modify USTORE constructor to set an empty store_source string,
1192 and don't copy the store_source string in a cancel. Hopefully
1193 this will fix Arno's seg fault, bug #744.
1194 kes Add back code to disable conio in configure. Fixes bug #743.
1195 kes Correct the Options scanner in the FD to correctly handle
1196 SHA1 option, which was eating the next option. Reported by
1198 kes Add code to indicate when the SD is spooling, spool wait, and
1199 despooling as requested by Alan Brown.
1201 Version 2.0.0 released: 4 January 2007