1 Technical notes on version 2.3
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
20 Improved status commands for Bat
21 Spooling/despooling status
22 Implement ftruncate for NFS devices
23 Add long term statistics job table
28 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
30 kes Add create_postgresql_database.sql to Win32 installer. Should
31 fix problem reported by Juilio Monteiro.
32 kes Get correct slot when auto unloading a device.
34 kes Fix multiple media restore.
35 kes Make DEVICE Slot private and access it via a method.
36 Allows better control over when it is set and cleared.
37 kes Fix possible seg fault if SQL error.
39 kes Add Martin's fixes to argument scanning for the estimate
40 command. This fixes bug #1093.
41 kes Add debug code to SD.
42 kes Fix renaming a Volume, which used the wrong Volume name.
44 kes If operator has rewind tape, print warning, release tape and
45 try once more. If tape is positioned somewhere, something went
46 wrong, so mark the tape in error and try once more. Previously
47 this error was fatal, now it produces an error message.
48 kes Ensure correct volume name displayed during restore
49 kes Ensure that Volume is mounted for restore.
51 kes Fix a few more Coverity reported problems.
53 kes Apply Allan Black's status dir job count patch.
54 ebl Add information about IMPORT/EXPORT slots in mtx-script.
55 kes Enhance a couple of SD debug messages.
56 kes Tweak unload flag setting and ensure it is set during swap.
58 ebl Fix #1091 about bad output in estimate command.
60 kes Modify autochanger locking to attempt to avoid race
62 kes Make sure device not busy before doing label command.
63 kes Display open() errors except when polling. Previously too
64 many were suppressed. This should fix bug #1070.
65 kes Fix Win32 reparse points. Bacula will not recurse into any
66 reparse point directory, including mount points, unless the
67 directory is explicitly mentioned at the top level (same as
68 with Unix). A file that is linked to another file will be
69 backed up -- much as Unix does for hardlinked files.
72 kes Remove double quotes from ChangeLog and ReleaseNotes
73 kes Remove StorageId test when pruning and recycling (Eric's changes).
74 kes Remove old form of locking when getting volumes -- causes deadlock.
75 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
76 the name unique and to eliminate compile time error.
77 kes Add accurate.o to Win32 FD Makefile
79 kes Fix cats dll build on Win32 after db_update_job_end_record
80 calling sequence change.
81 ebl Switch to tokyo dbm instead of htable in accurate code
82 ebl Include tokyo dbm to bacula source tree
84 kes Fix buffer overruns detected by Coverity.
86 kes Tweak joblog display.
88 kes Implement --without-qwt
89 kes Fix layout of restore tree dialog
90 kes Add configure bat QWT libraries, so that bat can be built
91 with or without the QWT libaries.
93 ebl Add dummy tape driver for regression tests.
94 kes Make sure we unload the right slot when swapping.
96 kes Add debug times, reduce size of two-pool-changer test
98 ebl Tweak autoconf scripts for faketape
100 kes Improve SD reserve debug code.
101 kes Testing an improvement to free up volumes no longer in use.
103 kes Rework SD acquire for read to handle autochanger Volume
105 kes Implement regression that explicitly tests swapping a Volume
106 from one drive to another.
107 kes Enhance disk-changer to detect most error conditions.
108 kes Fix SD code so that it properly swaps a Volume between drives.
109 This fixes bug #1083.
111 kes Apply libdbi patch from Joao Freitas for regress and for
112 Bacula trunk. Regress now works with libdbi. Nice.
113 kes Apply .nobackup patch from bug #1077 submitted by
115 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
116 name into jobs cloned via the run directive.
118 kes Prevent a Volume that is being swapped from being freed from
119 the volume list. This will most likely fix, at least partially,
121 kes Fix strippath so that it does not get a buffer overrun and crash FD.
122 This fixes bug #1078.
123 kes Remove 50 millisec wait in SD that broke debugger.
124 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
125 that a job may run, counted from when the job was scheduled.
126 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
127 a job may block waiting for a resource, counted from when the job starts
128 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
129 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
130 that implements multiple commands per line in the console when using
131 readline. Modify the default to use a semicolon as the command separator.
133 ebl Fix SQL query in migration code.
134 ebl Make accurate mode with hash disk pass regression tests
136 ebl Implement first cut of accurate backup with hash disk.
138 kes Force unload of volume when wrong volume mounted in SD.
140 kes Fix bat seg fault at termination.
141 kes Add Bacula generated version to bat about box.
144 kes Experiment with allowing multiple read jobs.
145 kes Move final volume swapping code to DCR method and
146 call it from acquire_for_read().
147 kes When wrong volume is mounted during read, unload_autochanger.
149 kes Integrate the libdbi changes from Joao Henrique Freitas
151 kes Stop searching for Volumes in SD askdir if DIR returns the
152 same volume name twice in a row.
153 kes Close bat console windows first to eliminate error message
156 kes Tweak the swap Volume from one drive to another code so that
157 it now seems to work.
158 kes Resolve several problems with recycling that broke the new
159 code (these problems are in 2.2.9 as well).
160 kes Remove the volume lock when calling the sysop code.
161 kes Don't mark a reserved volume with no writers as unused otherwise
164 kes Rework class structures for VOLRES, DCR, and DEVICE to make
165 the method names a bit more logical, and for more logically
166 handling the responsibilities.
168 kes Remove redundant code in terminating the scheduler that just
169 causes a seg fault in many cases.
170 kes Cleanup releasing a volume and make it a DCR method.
171 kes Improve algorithm for detecting pre-reserved volume and
174 kes Tweak volume swapping code so it works.
175 kes Correct name overloading in mount.c
176 kes Replace released flag in VOLRES with reserved and add access
177 methods for the VOLRES class.
178 kes Prevent volume from being released while being swapped.
179 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
181 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
183 kes Refactor parts of stored/mount.c
185 ebl Add sanity checks for VolWriteTime and VolReadTime
186 ebl Take care of bad clock changes while computing VolWriteTime
187 and VolReadTime. This should fix or limit #1066
188 kes Correct error string numbers in dird/catreq.c
189 kes Restructure reserving, acquiring, and mounting volumes. Calls to
190 autochanger are deferred for mount.c -- simplifes the code.
192 kes Do not prune any running job. It just fails the job.
193 kes Lock the volumes when changing dev->reserved_device and marking
194 the volume unused otherwise the device can get reserved by
195 another job before the volume is released, thus blocking it.
197 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
198 kes Fix bug #1063, reuse of freed ptr in list nextvol.
199 kes Release regex compile buffer in filed/job.c
200 kes Add proper type of const char in sql_create.c
201 kes Turn off debug in daemon termination routines
202 kes Move free_volume_list() before devices are freed in stored.c
203 kes Fix reference to uninitalized stack variables in bregex.c.
204 This should correct bug #1067.
206 kes Fix possible seg fault in SD when freeing a volume entry.
208 kes Implement unload_dev() before swap device.
209 ebl Add statistics prunning with option and menu
210 kes Separate unload_dev() from unload_other_device() in autochanger.c
212 kes Apply patch from bug #1069 that corrects spurious error messages
213 when ACLs enabled on SGI but no ACL exists.
214 ebl Fix small segfault in bacula-sd when debug level is 500
215 kes Modify run_program() and run_program_full_output() to use
216 call by reference for the results string. This corrects a long
217 standing problem where the address of the string may be changed
218 in the subroutine but not in the calling program.
220 kes Re-enable code to remember last volume mounted on a non-tape
222 kes Add patch supplied in bug #1068 that fixes a SD crash when using
223 a Virtual autochanger.
224 kes Generate correct JobMedia records during spooling/despooling when
225 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
226 <tih@hamartun.priv.no> for excellent analysis and testing.
228 kes Tweak hash algorithm for htable using Martin Simmons idea
229 for doing a circular shift.
230 kes Remember what volume is in VTLs (previously turned off for
232 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
233 pointed out some problems in creating JobMedia records during
234 spooling with concurrent jobs. Fix the problem by updating the
235 start file position before despooling and generate a jobmedia
236 record at the end of despooling.
238 kes Fix handling of JobMedia records during spooling and when a
239 Volume is changed without actually writing data to the Volume.
241 kes Rework certain SD locking based on gdb tracebacks of deadlocks
242 sent by Eric. This code now uses only the volume_lock() rather
243 than the reservations lock when at EOM and acquiring a new
245 kes Ensure only one exit point in several subroutines.
247 kes Implement bsock code to permit locking. Use the new code in Verify
248 in the FD to prevent the heartbeat thread from disrupting the Verify
249 data sent to the Dir.
250 kes Modify SD locking to eliminate locking the reservations system from
251 outside the system. Use the volume lock when getting media data
252 and reserving a new volume at end of media.
253 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
254 when SD starts are not locked into place.
256 kes Fix error compiling runscript code on 64 bit machines.
257 kes Tweak Win32 mount point code.
258 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
259 cleared giving bad file estimate).
260 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
263 kes Keep Schedule run lists in order as suggested by
266 kes Implement autostart scripts for Debian.
267 ebl Implement upgrade catalog scripts.
269 ebl Apply jobstat patch for long term statistics. Have to implement
270 purge stats command and upgrade scripts.
271 kes Fix mtx-changer.in for broken Debian mt program.
273 kes Fix large number of JobMedia records reported by Eric Bollengier.
275 kes Apply doc fix from bug #1062.
276 kes Resolve crash and improper restore wx-console Win32 restore
277 GUI. Fixes bug #1065.
278 kes Update Win32 wxWidgets to latest version.
279 kes Attempt to do correct handling of Win32 mount points. Should
281 kes Fix Win32 FD backup/restore memory leak due to improper termination
282 of BackupRead/Write. This fixes bug# 1038.
284 ebl Reduce memory usage for accurate backup, working only with ctime
285 and mtime. (not all Lstat field)
286 About 40MB for my linux system (400.000 files)
288 kes Add dcr->reserved_volume flag that allows us to release a volume
289 even if it is not vol->released. This allows maxvol2 to work when
290 Volumes expire and we are already writing to the device (i.e. a
291 volume is pulled out from under us by another job terminating after
292 we reserve the drive).
294 ebl Permit multiple command/console per runscript definition.
295 RunScript { command = /bin/true ; command = /bin/false ... }
296 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
297 (restart an application) just after the VSS snapshot on windows.
298 kes Don't zap dcr values during release_volume() as they might
299 have the next Volume to be mounted.
300 kes Fix AIX prototype.
302 kes Second cut of drive switching during backup.
305 kes Update Win32 version of wxWidgets to most recent version.
306 kes Tweak Copy job details.
307 kes Rework dir_find_next_appendable_volume to make a bit more effort
308 to find a suitable volume before giving up.
310 kes Make ask_sysop_to_create... to return if waken from wait.
311 This helps get out of blocked conditions.
312 kes Experimental implementation of switch_device in reservations.
313 kes Implement FD version to allow easier protocol changes.
314 kes Add Plugin Options string -- not yet passed to FD.
315 kes Implement PluginOptions ACL.
317 kes Attempt to correct problems with restores with autochangers and
318 use counts going negative
319 kes Rework SD status command and implement API for bat. Implements
320 header, runing waitreservation, devices, volumes, spooling,
321 and terminated status keywords.
322 .status storage=xxx <keyword>
323 kes Clarify TLS error message by adding double quotes around name.
324 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
325 kes Pass jcr to tls routines so debug messages can be handled better.
326 kes Rework jobq resource allocation code, and possibly fix a bug
327 that caused reference counts to get out of sync.
329 kes Rename fd/dir plugin to use Bacula standard underscore.
330 kes Plugin work -- bring dir up to fd level.
331 kes Start implementation of VTL code
332 kes Fix Win32 build after adding new cats subroutine.
334 kes First cut at Duplicate Job implementation.
336 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
337 kes Start PluginOptions string, and refactor a bit of ua_run.c
338 ebl Apply Allan patch that permit to reset recyclepool.
340 kes Test patch -- possible fix or improvement for bug #1053
341 kes Refactor FD and SD status commands to permit new API code in
342 SD, and to fix Win32 build.
343 kes Win32 build is now working.
345 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
346 some ideas in patch from Scott Bailey.
347 kes Begin implementation of duplicate Job control.
348 kes Fix some of Win32 build after recent additions.
349 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
350 which causes the FD to detect whether or not the OS has the
351 honor no dump bit (*BSD systems), and if so, to skip backing up
352 any file with this bit set. The feature is enabled by setting
353 'honor no dump flag = yes' in the Options section of a FileSet.
355 kes Correct po warning message with datarootdir
356 kes Implement more code in dird.c to put configuration parsing in
357 a class rather than use globals.
358 kes Restructure SD status command for implementation of bat API
361 kes Suppress incorrect 'Will not descend from x into y' messages.
362 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
363 daemon globals used by parser.
364 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
366 kes Fix free of plugin_list when none exists.
368 ebl Apply accurate project patch.
370 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
371 on non-mempool object)
372 kes First cut of converting FD .status to work with bat API.
374 .status client=XXX header
375 .status client=XXX running
376 .status client=XXX terminated
377 kes Implement first cut of Copy Job.
378 kes Implement Catalog in Pool resource. It overrides catalog specified
379 in the Client resource.
381 kes Apply patch (with some difficulties) from Joao Henrique Freitas
382 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
384 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
385 ftruncate() actually works. In the case of some (cheap) NAS devices,
386 it does not, and so recycling NAS Volumes does not work. The code
387 simply unlink()s the file, then recreates it. This fixes bug #1011.
389 kes First incomplete cut of big malloc blocks for htable.
390 kes Tweak plugin code.
392 kes Plugin debug code + tweak a couple bat dialog layouts
394 kes Fix creating first JobMedia record during Migration to include
395 proper index. This caused slow restores of migrated jobs.
396 kes Temp fix to plugin name file_index.
397 kes Bacula backed up and restored a MySQL database.
399 kes Implement plugin restore.
400 kes Implement parsing of db_driver to give db_type index.
402 kes First cut of plugin restore code.
403 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
404 and do not strip paths on symbolic links.
405 kes Set catalog backup database and user name from values specified on
406 the ./configure line.
407 ebl Fix #1031 about wrong pool source information in job report.
410 kes Remove a redundant jcr argument to find_files, match_files, and
412 kes Implement '.status dir header|scheduled|running|terminated' that
413 prints the requested status section. With the exception of the
414 header, the other reports have fields separated by tabs (\t).
416 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
417 a resource embedded run command to find a since time if no explicit
418 since time was supplied on the command line.
419 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
420 that updates the state file at job termination time in addition to
421 when the daemon terminates.
423 kes First version where a plugin did a backup.
424 bpipe-fd.so created a backup file, wrote a test
425 string to it, and Bacua could restore this fabricated file.
427 kes Implement DB Driver = string for the DBI driver.
428 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
429 kes First cut of code for loading Win32 plugin dlls. Implement
430 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
431 and implement a dlfcn.h file based on opengroup's definitions of
434 kes First cut plugin directives.
436 kes Apply patch from bug #1049 to prevent stripping the path on a
438 kes Attempt to fix bug #1047 where stripping a path corrupts the
439 heap. Waiting for feedback.
440 kes Correct the Mount message not to suggest labeling a new tape
441 when doing a restore. Submitted by email by John Stoffel.
442 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
443 FD by using casting. Reported in bug #1042.
445 kes A bit of crypto cleanup. More later.
447 Release Version 2.2.8
449 kes Apply patch from Martin to correct bug #1040, bscan sets existing
451 kes Fixed important spelling error in doc -- bug #1045.
453 ebl Fix bextract to be able to extract non-portable Win32 data to
455 kes Move initialization of read/write res lock earlier in the code.
456 This fixes the crash with a null conf file. This fixes bug
458 kes Redefine CURES in lib/parse_conf to be URES and move it all
459 into lib/parse_conf.c -- this responds to bug #1042, but does
460 not fix it. The fix is not to compile with FORTIFY_SOURCE.
461 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
462 the trunk SVN. I don't think this was reported as a bug.
464 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
466 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
468 kes Add DataDespooling and DataCommitting status (committing is
469 the last despooling).
470 kes Finish implementation of new reservations code noted below.
472 kes Fix bsnprintf for float point numbers. I broke recently when
473 parameterizing some variables. This fixes bug #1036.
474 kes Undo recent reservations changes ... will apply them later
475 when they work better.
477 ebl Fixes #1034 which cause mysql to hang the connection after 8h
478 ebl Change default statistics target of filename.name and path.path
479 fields for PostgreSQL. This speeds lookup by indexes. Thanks
481 kes A few more tweaks to new reservation code. Make sure to clear
482 vol released flag when retaking volume. When reading label and
483 label is bad mark volume unused. When recycling, mark volume
484 unused so it can be renamed.
486 kes Fix reserve_volume() so it doesn't release a volume in use
487 (i.e. a volume entry not marked released). This should be
488 the last part needed to fix bug #1018.
490 kes Move Heartbeat documentation from Job to Director resource.
491 This fixes bug #1033.
493 kes Fix existing switch drive SD code to call autochanger to release
494 any old volume. This must be done to keep the autochanger from
495 releasing subsequently newly reserved volumes in doing a close().
496 This should fix bug #1018.
497 kes Fail if attempting to get console input in batch mode. This
498 should help fail RunScript console commands that are incomplete.
499 kes First cut implementing switch_drive() in SD (not actually called).
501 kes Implement first cut running console commands in a RunScript.
503 ebl Fixes bug #1028 where 'Selection Type' option was not usable
505 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
508 Release Version 2.2.7
510 kes Add new free_tls() entry point so that Win32 builds.
511 kes Fix compile warning in src/lib/util.c
512 kes Fix entry point for edit_job_codes() so that Win32 builds.
513 kes Fix seg fault Frank Sweetser reports in regression testing
514 on his systems. The problem was that the original author of
515 bsnprintf.c did not take into account the side effects of
516 using ++x in the argument to a #define.
517 kes Make SD protocol backward compatible with version 2.2.x.
519 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
520 because Bacula no longer restores sockets.
521 ebl Always use ignorecase fileset option on win32 FD.
523 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
524 that implements double quoting include names in conf files,
525 and also allows piping input by having the first character
526 be a vertical bar (|).
527 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
528 that implement %f in RunScripts to pass the FileSet name.
529 kes Skip leading | when lex input comes from a pipe as suggested
530 by Michael Stapelberg <michael@stapelberg.de>.
532 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
533 Nerijus Baliunas <nerijus@users.sourceforge.net>
535 kes Implement Plugin Directory and plugin events.
537 kes Implement a security enhancement: TLS authentication but no
538 encryption. Enabled by setting 'TLS Authentication = yes'.
539 Note when this is on, TLS encryption is turned OFF!
541 kes This patch corrects a problem where the maximum concurrent storage
542 jobs counter gets out of sync during restore jobs causing jobs to
543 'wait on max Storage jobs'. This patch fixes bug #1009.
545 kes This patch fixes bcopy so that it produces correct Volumes.
547 kes This patch eliminates spurious output to the console during a VerifyVolume
548 job that contains encrypted data. It fixes bug #1024.
550 kes This patch prevents the 'status dir' command from trying to use a scratch
551 volume and possibly moving it from one pool to another. This patch fixes
554 kes Add new include to postgresql.c suggested by Marc Cousins so
555 that it compiles correctly with pgre version 8.3.
557 kes Fix --archivedir addition to configure. Replace it with
558 --with-archivedir in configure.in This fixes the regression
560 kes This patch fixes bug #1012 where the job is canceled because
561 of Max Run Time exceeded when the job has not yet started.
563 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
564 one 'part' to write. Instead of each part being stored on disk,
565 written to DVD, then deleted from disk, all parts are written to disk,
566 and only the last is written and deleted from disk.
567 kes This patch fixes the status command to include the formating string for
568 JS_AttrInsterting. It fixes bug #1021.
569 kes This patch should fix the Mac OS X build problem on the latest
570 Darwin, where sys/types.h was not included correctly (apparently
571 due to a change in the Mac headers). The solution was to explicitly
572 ensure that it is defined for the ./configure.
573 This patch also has a rebuild of configure that includes the Debian
574 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
575 kes This patch should ensure that queued messages to the console are
576 displayed as soon as possible. It should fix bug 1007, but has been
577 reported not to work.
579 kes This patch fixes the infinite loop when trying to increase the
580 maximum number of volumes in a Pool during the add command.
581 This patch fixes bug #1008.
583 Release Version 2.2.6
585 db Remove extra data on estimate command in joblist for bat.
587 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
588 really change anything, but is the beginning of doing it *right*.
589 To do it completely right the LastWritten date must be passed to
590 the SD, but it is not yet done.
591 kes Minor tweaks to some bat restore SQL.
592 kes This patch fixes bug #1003 where putting the message output from
593 a Verify job into the catalog results in a recursive loop. The problem
594 seems to show up only with postgresql (to be verified).
595 kes Correct %x to %p in postgresql debug statement.
597 kes Fix bug #942 where lots of emails where generated when the heartbeat
598 interval was low and Bacula wanted a different tape from the one in
601 ebl Add new SD despooling attributes and Dir inserting attributes
602 job status codes in the catalog (Status table).
604 ebl Use qmake-qt4 instead of qmake when available (debian system).
606 kes Add a security warning to src/cats/make_catalog_backup.in indicating
607 that passing the password via the command line (arg 3) is insecure.
608 This responds to bug #990 (it doesn't fix it).
610 kes Set default debug_level to zero. This corrects bugs #991 and #993.
611 kes Fix a crash in bat when it cannot connect to the Director for example
612 if the Director is not running.
613 kes Remove redundant INDEX (JobId) from File table in the trunk.
615 kes Make explicit exception to GPL in LICENSE to permit linking
616 the Win32 FD with Microsoft VSS code.
617 kes Apply the Solaris package patch from
618 Masopust, Christian <christian.masopust@siemens.com>
619 kes Apply the patch to optionally add a timestamp in the debug output
620 submitted by Mariusz Czulada <manieq@wp.eu>.
622 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
623 backend (sql_strerror). Fixes bug #989
625 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
626 It applied with no problems.
627 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
629 kes Redirect stderror to stdin on mt status command in mtx-changer.in
630 since the status is returned on stderr on Solaris.
631 kes Activate Close button on tray-monitor window. This fixes
633 kes Check for NULL item in parse_conf.c before calling it. In the
634 case of Device, there is no item and this caused a seg fault when
635 Device appears in the conf file.
636 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
637 avoids pulling in config.h multiple times in some new code.
639 kes Fix spurious warning message printed when creating a volume with
640 a LabelFormat. This fixes bug #976.
642 Release Version 2.2.5
644 kes Add JobId in place of Job name in all the Jmsg() output.
645 kes Correct the APP_DESC for the Win32 storage service (remove an e).
647 kes Make maxvol-test and new more strict maxvol2-test work.
648 kes Print JobId in all Jmsg() job output.
650 kes Add new SD despooling attributes and Dir inserting attributes
651 job status codes. This fixes bug 961.
652 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
654 kes Fix doc issue. This fixes bug #963.
655 kes Fix listing performance problems in bat. Pointed out by
657 kes Remove old debug code.
658 kes Fix bat code that tests for Win32. This should fix bug #968
659 kes Query 5 list wrong Vol after migration. This fixes bug #960
661 ebl Fix #969 where user can't change Replace option in restore menu.
663 kes Save jcr in thread specific data (tsd) for each thread.
664 kes Make Dmsg() print JobId as -%u.
665 kes Make Jmsg, Emsg, and others automatically pickup the jobid
666 for the thread if it exists.
667 kes Remove old reservation debug jid code.
668 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
669 ebl Add an option that permit to specify spool size in job
670 definition. (Applying patches/testing/spoolsize_per_job.patch).
671 You must upgrade SD and DIR at the same time.
672 dvl Add new configuration item --archivedir
673 dvl Adjust regression tests to use tmp not /tmp. This will allow
674 multiple concurrent runs of the regression tests.
676 kes Fix race condition that drops final block written to volume.
677 This happens in rare cases with multiple simultaneous jobs
678 when the Volume fills. This fixes bug #964. May be related
679 to bug #935 and possibly #903.
680 kes Eliminate more strerror() and replace with bstrerror().
681 kes Remove BSD getopt and replace with unrestricted IBM version.
682 kes Fix Win32 build for changed calling sequences.
683 kes More tweaks to the mount volume routines to get everything
684 right. Changed variable name from find to have_vol, which is
685 much easier to understand.
686 kes Enhance btimer debug code.
688 kes Fix FD->SD authorization failure, which was due to spurious
689 wakeups from a pthread_cond_timedwait(). Simply check the
690 predicate before continuing. This fixes bug #953.
691 kes Add const char where needed (more to do). Remove temp debug code.
693 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
694 kes Don't overwrite error message in check_tables_version.
696 kes Unlock batch insert tables with same calls used elsewhere.
697 kes Allow starting 59 jobs a second.
698 kes Make SD session key more random.
699 kes Add retry for SQLite opening db if it fails. Probably helps
701 kes Suppress extra error messages during batch insert failure.
703 kes Add jcr to timer packets so if killed message can be sent to job.
704 kes Add JobId to all Dmsg() output.
705 kes Put some FD auth code on dbglvl rather than fixed.
706 kes Return insert attributes error message in db msg buffer to avoid
707 false error messages. Helps fix bug #966.
708 kes Separate batch init error messages. Probably helps fix bug #966.
709 kes Make SD code that contructs attribute insert check string lengths
711 kes If Dir gets an error during inserting attributes, cancel SD.
712 This reduces unnecessary error messages.
714 kes Correct search boolean for getting Volume info
715 ebl Cleanup batch insert code. Probably fixes bug #965.
716 kes Back out one small change to the reservation system (reserving a volume).
717 kes Rework how a Volume is mounted. It is now much more intelligent and
718 will always attempt to use any mounted volume if possible and reduces
719 calls to the Director asking about volumes.
721 kes Turn off some code when batch insert not enabled.
722 kes Edit FD name in connect error messages.
723 kes Rework the reservation system to take into account that the Director
724 might give us a Volume that is different from the current one being
725 used, and to ensure that we don't exceed Maximum Volume Jobs.
726 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
727 fatal error with multiple jobs running'
728 kes Add more debug code in reservation system.
729 kes Implement maxvol-test to check bug #947.
731 kes Add code to handle tray monitor separated from Win32 FD.
732 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
734 kes Add missed return in fixing verify bug -- trunk only.
735 ebl Fix a command parser issue causing a director segfault.
736 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
738 kes Increase the max block size to 4MB fixes bug #957.
739 kes ERABT if user sets min block size > max block size. Fixes bug #956.
740 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
741 is not properly mounted (recognized) during a poll.
742 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
743 Job that has differences reports Verify OK.
744 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
746 ebl Add an option to operate on all pools with update vol parameters.
747 This complete the project 20. Patch from Nigel Stepp.
748 ebl Add history support to bconsole when using readline.
749 Using Ctrl-D to exit doesn't update .bconsole_history
750 kes Modify new volume algorithm to use max MediaId for generating next
751 volume number rather than the count of Volumes. This should essentially
752 eliminate the failure rate if some volumes were deleted. Bug #921.
753 kes Begin implemention of Optimize Job Scheduling.
754 kes Implement restore callback that Dirk and I agreed on for bat
755 restore. This fixes bug #928. Restore of backup of zero files fails.
756 kes Fix SQL Catalog logging which broke with new db_escape_string
759 Release Version 2.2.4
761 kes Fix bacula_cats.def for new db_escape_string().
762 kes Increase size of name string when FD making connection to SD.
763 May fix bug #953. FD->SD connection failure.
765 kes Add code to help Dan debug 2drive-incremental-2disk test.
766 kes Add code to try to fix bug #908.
767 kes Add waits to multiple exit detection code to try to force pid
768 file to always be deleted.
769 kes Restore good dev.tar.gz to rescue set appropriate binary property.
771 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
772 trying to switch drives by checking for blocking before unblocking.
774 kes Cancel storage daemon in all cases where FD reports error. This
775 should fix virtually all cases of bug #920.
776 kes Fix db_escape_string() for MySQL which did not compile.
778 kes Fix error message that was clobbered when Dir tells SD it does not
779 have write permission on Volume. This should fix a minor point
780 in bug #942, but not the main problem.
781 kes Add code to cancel job in SD if FD connection fails. This should
783 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
784 dvl Pass jcr and db into db_escape_string() to enable better escaping
786 kes Fix migration code to get correct Volume name with multiple volumes
787 by skipping |. Fixes bug #936.
788 kes Implement patch supplied by Landon to fix bug #944 where using
789 TLS with bconsole uses 99+% of the CPU.
790 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
792 kes Move patches into patches directory.
794 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
797 ebl Using 'm' in bconsole will show messages like before,
798 and not memory usage.
799 kes Fix bug #935, and probably also bug #903 where files were not
800 restored. MediaId was not properly set in JobMedia record after
803 kes Suppress chown and chmod error messages if the FD is not running
806 kes Apply Martin Simmons' patch that should turn off the new API usage
807 when batch insert is turned off allowing building on older
809 kes Add ./configure search in qwt-qt4 for qwt package
811 kes Bacula is now free of 3rd party GPL copyrighted code!
813 kes Add guid_to_name.c/h which replace idcache.
814 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
816 ebl Detect if new PosgreSQL batch insert API is present.
817 kes Correct incorrect mempool call causing Director crash. Occurs on
818 systems without va_copy().
819 sb Update spec files for 2.2.1 release
821 kes Fix memory pool call in ua_output.c. bug #934.
822 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
823 Add test program to fnmatch.c
825 kes Integrate patch to README.vc8 from
826 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
827 edit it to get it into Unix patch format.
828 kes Implement mkpath.c to replace old FSF makepath.c
830 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
832 Release Version 2.2.1
834 kes Update POTFILES.in
835 kes Cleanup a few underquoted AC_DEFUNs in configure
836 kes Apply patch from Martin Simmons that adds a test for va_copy to
839 kes Fix bug #921 by increasing the number of tries to create a new volume
841 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
842 can be called multiple times. Implement a version for machines
843 without va_copy() that gets a big buffer.
845 kes Integrate more portable zone offset code into bsmtp.c
846 Submitted by Attila Fülöp.
848 kes Fix bad SD->FD return status reported by
849 (James Harper) <james.harper@bendigoit.com.au>
850 ebl Fix a bug in read_close_session which return random status
851 thanks to James Harper
853 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
854 and directory names during restore of single file/directories.
855 kes Add sanity checks to .sql command when string is empty. Hopefully
856 that will resolve Dirks Director crash.
858 kes Apply patch submitted by Martin Simmons that corrects a seg fault
859 in the bsmtp chat subroutine when debug is >= 10.
861 kes Fix Director crash when running bat SQL queries.
862 kes Add David's notes on Item 8: Copy pools.
864 kes Rework projects file to be current and ready for a vote.
865 kes Enhance lex scanner error message.
867 kes Tweak LICENSE file to mention BSD code.
868 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
869 if specified on the ./configure.
870 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
871 This class is intended to allow us to open a second bsock to the
872 Director while in the restore subdialog.
874 kes Fix configure to create bat Makefile before creating dependencies.
875 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
876 kes Add a tooltip to the tray monitor.
877 dvl Set the Director's PID file before dropping privs. This fixes
880 kes Update AUTHORs file
881 kes Increase the default max concurrent jobs to 20 in FD and SD to
882 correspond with the default .conf files.
883 kes Rewrite the Win32 service routines. This eliminates the 3 copies
884 some different, of the same file created by RN when porting the
886 kes Rearrange some of the Win32 directories and the placement of the files
888 kes Set DEVELOPER flag in version.h
890 ========================================================================
891 Release Version 2.2.0
893 kes Apply a second doc patch from Marc.
894 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
895 improves the tips section that discusses how to setup multiple
898 kes Update bat README file.
899 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
900 corrects a typo in the Recycle status check in db_find_next_volume().
901 This will probably fix a number of annoying problems with multiple
903 kes Modify most of dird/msgchan.c to use bsock class calls rather than
904 bnet calls -- no functionality change.
906 kes Modify the Verify output to specify if files are missing on
907 the Volume(s) or disk. Fixes confusion in bug #916.
908 kes When more than one Volume is read in a migration job, the last
909 Volume bytes reported are from the last read volume rather than
910 the last written volume. Fixed. This fixes bug #910.
911 kes Fix display of Recycle flag after update volume=foo recycle=yes.
912 It previously printed New Recyle flag is: no. This fixes bug
915 kes Correct seg fault when switching tape drives during restore.
916 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
917 be used until after 2.2.0 release.
919 kes Remove fnmatch() in SD that permitted wild card specifications.
922 kes Fix %g in filename returned by SQL for browse tree reported by
924 kes Fix configure so that it puts config.out in the cwd rather than
926 kes Attempt to fix the locking problem reported by Eric in bug #906.
927 kes Make berrno class to leave errno unchanged after constructor call.
928 kes Make bnet_server use the heap rather than the stack to allocate
929 its socket fd pointers to avoid a crash at termination. Problem
930 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
932 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
933 and putting it in depkgs-qt along with Qt4.3.
935 kes Rework code in acquire.c that switches drives for reading when
936 the Media Type does not match. This should fix bug #906
938 ebl Fix a director segfault during job setup #907
939 kes Correct seg fault in postgresql when first operation returns no
940 rows. Fixes Dirks File browser problem seg fault with bat.
942 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
943 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
946 kes Implement PopUp YES/NO dialog for bat.
948 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
950 kes Correct RunScript to terminate job in FD on failure.
951 kes Change abort_on_error and AbortJobOnError to fail_on_error
952 and FailJobOnError in RunScripts.
953 kes Minor tweaks of code formating in RunScripts, principally to
954 avoid depassing 80 columns.
956 kes Eliminate one #ifdef Win32 in bsmtp
957 kes Implement grow tool to grow a file for testing very large databases.
958 kes Add big-vol-test to test Bacula seeking with > 5GB.
961 kes Modify find_next_volume() to return all values in Media record.
962 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
966 kes Update Release notes
968 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
969 Warning, in previous beta version, all media get from scratch keep their
972 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
973 This should fix bug #842. Made a note to look at removing the temp
974 files at the end of the install.
975 kes Add ability to mount and unmount a file device providing it is
976 marked as being removable and has the appropriate mount and unmount
977 commands defined in the Device resource. This fixes bug #830.
978 kes When applying a storage override, release all previous storage
979 definitions rather than just prepending the new storage.
980 This should prevent a good deal of confusion.
982 kes Implement ./configure search for qwt libraries.
984 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
985 Win32 FD. This should fix bug #893.
986 kes Remove an unnecessary beep in Win32 init code.
987 kes Update copyright dates in Win32 executable about boxes.
988 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
989 code with a BSD getopt.c and getopt.h.
990 kes Remove sched.h from the Win32 compat directory -- not used.
991 kes Remove the Exit menu item from the Win32 tray monitor. If you really
992 need to shut it down, do it through the services panel or the command
994 kes Remove some inappropriate Bacula FSFE copyrights.
995 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
996 kes Fix regress config non-portable test as pointed out by
997 Florian Heigl <florian.heigl@gmail.com>
998 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
999 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1001 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1002 Reported by Frank Sweetser.
1006 kes Fix client-only build.
1007 kes Integrate client-only fixes for bsys (initgroups) and conio from
1008 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1009 kes Make arguments to get_scratch_volume() in same order as other
1011 kes Rework the prune_volumes() subroutine so that after purging and
1012 no volume found in desired pool, it will check for a scratch
1013 volume. This prevents recycling the whole scratch pool.
1014 kes Add code to status storage to print boffset_t (largefile support).
1016 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1017 kes You now need a --with-qwt=<dir> to be able to build bat.
1018 kes Update src/win32/cats/bacula_cats.def to include the new
1019 db_get_query_dbids() call on Win32.
1021 kes Correct a problem when selecting a scratch volume and moving
1022 it to another pool that lost some columns.
1023 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1024 kes Enhance Autochanger error messages to include Volume and device name.
1025 kes Rework prune_volumes() code to take account of InChanger flag,
1026 and to handle recycling volumes going to the Scratch pool and
1027 current pool because the RecyclePool directive.
1028 kes Implement a better and more efficient db_get_query_dbids() to
1029 handle creating and passing back a list of DBIds.
1033 kes Start work on new more efficient DBId subroutine. First use
1034 will be for recycling volume to Scratch inchanger.
1035 kes Increase number of JobIds in pruning from 1000 to 10000.
1036 This to be replaced by above routine.
1037 kes Begin implementation of building Qt4 on Win32.
1038 kes Correct typo in fix I added for bad TLS shutdown.
1039 kes Pull 2.0.3 patches into patches directory.
1040 kes Update Release notes. Include qt-console in line count.
1041 kes Update Projects file.
1043 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1044 bug in migration code where a job that spanned two volumes
1047 kes Implement new BST_DESPOOLING blocked state. Change from locking
1048 during despooling in SD to blocking. This means that other threads
1049 can work with the device structure, in particular the reservations
1050 system while despooling.
1052 kes Fix return in reservation message queue that missed clearing
1053 the jcr lock (implemented 26Jun07 below).
1054 kes Rename a number of dev methods to make locking function names
1056 kes Document locking in lock.c. Move lock structures to new file
1059 kes Move reservations message lock to lock jcr only this
1061 kes Move main SD locking code into lock.c (new file).
1062 kes Update Win32 build to include lock.c
1066 kes Dirk committed the qwt library code for drawing graphs in bat.
1067 kes Tweak install of qwt so that it is integrated with ./configure.
1069 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1070 out by Eric (my typo).
1071 ebl Fix configure.in to get batch mode enable
1072 kes Return correct string from authenticate.cpp in bat when connecting
1074 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1075 spurious line drops when using TLS.
1076 kes Do not file reparse points when restoring a file that already
1079 kes Implement Windows reparse points -- similar to directories, but
1080 we do not descend into it. This is a first cut. They seem to
1081 be backed up, but restore is not yet tested.
1082 kes Remove restore_blocking in tls code when shutting a socket to leave
1083 it in blocking mode. Hopefully this will fix the encryption bug
1084 reported by Frank Sweetser.
1085 kes When opening a file for backup, tell the OS that we are going to
1086 read it sequentially -- optimization.
1087 kes Change variable names in authenticate_director() to not conflict
1088 with member names in bat. Caused great confusion with compiler,
1091 kes Queue openssl error messages in case of comm problem.
1092 kes Do shutdown() call if socket terminated.
1093 kes Remove some duplicated code in tls.c
1094 kes Move more of the bsock member variables into private and access
1096 kes Add Frank Sweetser's tls-test to the regression suite.
1098 kes Add Swedish sv.po file
1100 kes Don't print clock skew message in FD if less than 3 seconds diff.
1101 kes Add a bit of VSS info to status client.
1102 kes Implement a first cut of Vista VSS, using Win2003 code.
1104 Release: 2.1.20 beta
1106 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1107 loaded tape but uses first drive).
1108 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1109 This was indeed a Win32 issue.
1111 kes Simplify search of autochanger for in-use Volume.
1112 kes Fix exit condition of check for in-use volume. kes Remove
1113 inappropriate my_postgresql_free_result() in db_close()
1115 kes Fix bad return in FD when encryption signature not found.
1116 Probably caused a crash.
1117 kes Inhibit missing encryption signature error messages for
1118 file types where no signature computed.
1119 kes Correct inverted check on autochanger in reservation system.
1120 kes Tweak debug code in autochanger reservation.
1122 kes Add some additional locking in the cats directory in subroutines
1123 that modify packet variables called from batch insert.
1124 kes Rework how dcrs are allocated. new_dcr() can now be called
1125 with an existing pointer, and it will simply clean it up.
1126 This allows the reservation system to test various different
1127 devices, and will permit easy device changes.
1128 kes A bunch of changes all over to handle new new_dcr() calling
1130 kes Work more on the Volume management in the SD. Remember Volumes
1131 for tape drives and for autochangers (even virtual disk changers).
1132 kes When looking at the Volume list to reserve a drive, handle
1133 autochanger names correctly by interating through the changer
1134 devices. Also call the Director to see if a Volume is suitable
1135 for the current job.
1136 kes Fix some bugs in bscan. Make sure all media records are written.
1137 Make sure that valid JobMedia records are written for disk files.
1138 Previously they were completely wrong.
1139 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1140 that the URLs don't change and so that the developers will all
1141 work off the same copy. Rebuild from scrach.
1142 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1144 Release: 2.1.18 beta
1146 kes Fix seg fault in FD from incorrect digest size.
1147 kes Fix argument to non-OpenSSL crypto.c subroutine.
1149 Release: 2.1.16 beta
1151 kes Remove a few malloc()s from the encryption code.
1152 kes Use the class calls to bsock in filed/backup.c and restore.c in
1153 place of the old bnet_xxx code.
1154 kes Implement code that does an on the fly calculation of the
1155 signing digest during restore of encrypted files. It makes
1156 a best guess at the algorithm, and if it is not correct, will
1157 then revert to the old code which reads the file after it is
1159 kes Implement at least one missing crypto stream in stream_to_ascii()
1160 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1161 #877 where a reload with bad syntax causes Dir to exit.
1163 Cut: 2.1.14 beta (not released)
1165 kes Do not free a volume on a tape drive until another volume is
1166 mounted and read, or the autochanger unloads the volume.
1167 This should help the SD re-use volumes that are already mounted,
1168 and should fix bug #886.
1169 kes Apply patch from user brettedgar that allows gnome2-console include
1170 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1171 kes Apply patch from Lucien Weller that fixes day of week calculation
1172 because of DST flag problem. Fixes bug #887.
1174 kes Move find_next_appendable_volume() to after acquiring a valid device
1175 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1177 kes Unable to reproduce bug 872. However added additional testing for
1179 kes Bug #874 resolved by documenting SQLite limitations.
1180 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1181 kes Bug #881 resolved by removing typo in mtx-changer script.
1182 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1183 approval. Added a link to the wiki on the web page, and implemented
1184 a backup from http://paramount.ind.wpi.edu
1186 kes Fix update allfrompool to pass pool name.
1188 kes Convert to pure GPL v2 license.
1189 kes Fix sscanf problems reported by Peter Buschman that caused
1190 a bus error on Solaris.
1191 kes Rework (simplify) the select prompt in bat.
1192 kes Move get_jobid_from_tid() into lib and create a
1194 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1195 should definitely fix the problem of lost error messages in the
1197 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1198 kes Eliminate tcpd.h from the project. Enclose the #include from the
1199 library with extern C ...
1200 kes Add print of signal name when a signal is trapped.
1202 Release: 2.1.12 beta
1204 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1206 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1207 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1208 makes SQLit3 run 30 times faster, though a bit less safe.
1209 kes Implement --with-batch-insert in configure and detection of thread
1210 safe libraries. It is on by default, but turned off if no thread
1211 safe library (e.g. SQLite 2) is available.
1213 kes Fix Bacula PostgreSQL buffer overruns.
1214 kes Do better checking for NULL results returned from PostgreSQL;
1215 implement retry for failed queries; clear results buffer after
1216 failed query. Hopefully this will correct the PostgreSQL failures.
1218 kes Implement algorithm to handle only one appendable volume with
1219 Prefer Mounted Volumes = no.
1220 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1221 returned from a query.
1222 kes Make volume lock recursive.
1223 kes Implement an additional volume reservation algorithm that
1224 starts by considering all reserved volumes then uses the
1225 old brute force algorithm of searching the resources to
1226 find a suitable device.
1227 kes Add new reservations debug code and refine the old code.
1228 kes Update the win32/dll/bacula.defs file.
1230 kes Tweak reservations algorithm to permit a few more cases, i.e.
1231 volume reserved, but on different drive, ...
1232 kes Enhance SD status to include Pool and Media Type for drive in a
1233 more readable format (a bit longer).
1234 kes Fix PostgreSQL double free.
1236 kes Minor refactoring of restore decryption code.
1237 kes Add code to smartall.c to detect double free of a buffer.
1239 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1240 so that bsmtp will create a correct email address (mailbox only).
1241 kes Modify 'memory' command so that the buffers are listed as 'In use'
1242 to avoid confusion with Orphaned buffers.
1243 kes I reworked the OpenSSL include/lib flags to be handled in
1244 the standard Bacula way, which should fix bug #863 concerning
1245 non-standard OpenSSL libraries.
1247 kes Implement Help Browser window for bat.
1248 kes Fix reload bug that reset StorageId to zero.
1250 kes Fix TLS #ifdefing when TLS turned off.
1251 kes Ensure that when labelling a tape with Slot=0 that InChanger
1253 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1255 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1256 add DISTINCT (required by PostgreSQL).
1257 kes Implement BSOCK authenticate_director() method. Eventually will
1258 authenicate all daemons.
1259 kes Move several more functions into the BSOCK class.
1261 kes Add code to tell the OS that we no longer need a cached
1262 file that we were reading. In findlib/bfile.c. Also,
1263 only cache files that we are reading. Thanks to
1264 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1265 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1266 kes Implement script to automatically generate cats and dll .def
1267 files for Win32 dll.
1268 kes Update README.mingw32 to include new .def file generation.
1269 kes Correct typo in UTF-8 error message as reported by:
1270 jhernandez <julianhernandez@gmail.com>
1271 kes Add additional sm_check() code on debug level 1.
1272 kes Set default debug level to 1.
1273 kes Trap SIGABRT in attempt to get traceback.
1275 kes Reduce bat connect timeout from 30 to 15 seconds.
1276 kes More restructuring and implementing BSOCK class in place of
1278 kes Remove a few unnecessary malloc() tests in crypto code.
1279 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1280 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1281 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1283 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1285 kes Fix Verify InitCatalog. The attributes were not pointing to the
1286 correct saved location.
1287 kes Implement message callback so that GUI is sure to get all
1288 daemon messages. Currently displayed in a dialog in bat.
1289 kes Ignore SIGUSR2 (Bacula timer) in bat.
1290 kes Apply regress patch from bug #859 to allow regress to work
1291 with Solaris compiler.
1293 kes Begin adding TLS support to bat.
1294 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1295 clean up lex.c and make it more readable.
1297 kes Move more bnet functions into the BSOCK class.
1298 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1299 kes Complete change of berrno strerror() method to bstrerror()
1301 Release: 2.1.10 beta
1303 kes Cleanup incorrect email addresses in bsmtp.
1304 kes Make bat display initial messages rather than discard them.
1306 kes First cut of adding .mod to the run command.
1307 kes Implement auto display of messages in bat.
1308 kes Enhanced preferences to allow all Bacula output to be
1311 kes Try to make bsmtp date routines more generic.
1312 kes Fixed bug #856 autochanger documentation.
1313 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1314 kes Add new cats entry point so Win32 builds.
1316 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1318 kes Do better checking for the MySQL 64 bit libraries looking for both
1319 .a and .so libraries.
1320 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1321 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1322 kes Require the thread safe version of MySQL during configure. Thanks
1323 to Andre Noll for pointing this out.
1324 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1325 continuing in migration code.
1326 kes Apply implementation of tray-monitor font derived from gnome-console
1327 submitted by Andreas Piesk <a.piesk@gmx.net>
1329 kes Eliminate important memory loss in SQLite
1330 kes Fixed the batch insert MySQL thread specific data that was not
1331 being freed. See cats/mysql.c:db_thread_cleanup().
1332 kes Fix restore before command.
1333 kes Convert old hdr.name to name() in a few places.
1334 kes Implement update jobid command.
1335 kes Return all time_t dates in db_get_job_record()
1336 kes Stop watchdog in SD earlier.
1337 kes Put Pool just after Storage in please mount message.
1338 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1341 kes Update the po files.
1342 kes Fix Verify InitCatalog by making it cache attributes.
1344 kes Change name bacula-bat to bat for man 1 page to correspond to
1346 kes Check for client and store NULL pointers in status command. This
1348 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1349 kes Fix sign extended editing of %p.
1350 kes Clean out a little old #ifdefing in cats/mysql.c
1352 kes If time diff between DIR and FD is more than 600 seconds convert
1353 INFO message to WARNING.
1354 kes Implement heap size display in status for all daemons.
1355 kes Attempt to fix MySQL db open memory loss (not successfull).
1356 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1357 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1358 Query. This looks like a MySQL but but by doing extra releases,
1359 the memory goes away. This should fix bug #847.
1361 kes When backup fails, cancel SD before waiting for sd termination.
1362 kes If SD is waiting for FD to connect during cancel, wake up the
1364 kes Fix fsf code so that errno is correctly reported.
1365 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1367 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1368 so that Bacula doesn't later stumble into a seg fault.
1369 kes Use the term Restore Client in the restore Job report.
1370 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1371 the original job's FileSetId.
1372 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1373 spooling in migration jobs. Not yet tested.
1374 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1375 reading conf file from a pipe. However, do it with open_bpipe()
1376 rather than popen. Not yet tested.
1378 kes Fix an ugly bug where the VolCatBytes were getting updated
1380 kes Implement bconsole memory command that prints current memory
1381 usage, plus smartalloc dump.
1382 kes Clarify some error messages in backup, admin, and migrate.
1383 kes Shrink label dialog to smaller size.
1384 kes Invert Cancel OK buttons on restore to be OK Cancel.
1385 kes More strerror() to bstrerror() conversions.
1387 kes Start implementing bstrerror() in place of strerror().
1388 kes Stripping path -- seems to work.
1390 kes Prevent door and port files from being restored (mostly
1392 kes Free an unreleased buffer in compat code.
1393 kes Change console Job name from *Console* to -Console- to eliminate
1394 Win32 filename problems. Put Win32 path separator when creating
1395 Console file. This fixes bug #846.
1396 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1398 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1400 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1401 to force Win32 error message.
1403 kes First cut strip path. The data should be passed to the FD,
1404 but nothing is done with it yet.
1405 kes Enhance the digest and signature routines in the crypto
1406 library to accept a JCR and to use it to print error messages
1407 so that they will go in the Job report rather than the daemon's
1409 kes Simplify some of the verify signature code.
1410 kes Simplify a few of the alternative returns in the signature
1413 ebl Use only POSIX regex instead of GNU regex in breg.c for
1414 File relocation. It fix broken freebsd compilation.
1415 kes Convert all other Dir files to use new ua class message
1417 kes Tentative fix for missing digest signature in bug 807.
1418 kes Correct handle problem in new win32_ftruncate routine.
1419 kes Convert ua_purge.c and ua_update.c to use new ua class
1420 message routines for bat.
1422 kes Correct incorrect installation of LICENSE in Win32 installer.
1423 kes Display LICENSE at the beginning of the Win32 install.
1424 kes Attempt to correct the need for the png files to be installed
1426 kes Reapply my bat.conf install script in qt-console. I think I
1427 editted bat.pro instead of bat.pro.in and it was lost.
1428 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1429 the /var/lock/subsys for subsysdir. Also corrects typos in the
1432 kes First cut update job.
1433 kes Correct configure to include qmake of src/qt-console directory.
1435 kes Make restore job yes/mod/no print in one command so GUI works.
1436 kes First cut implementing backup and restore client.
1437 kes Correct editing in Verify output that caused a seg fault.
1439 kes Insure that bat.conf is not overwritten during installation.
1440 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1441 while I was implementing migration in March 2006 !
1443 ebl Cleanup file relocation, using char *RegexWhere instead of
1444 char *where + bool where_use_regexp
1445 kes Update some manpages and add bat manpage.
1446 kes Make a first cut at converting bacula.spec.in for bwx-console
1448 kes Apply patch from John Goerzen to add hostname as fourth argument
1449 to make_catalog_backup script.
1450 kes Fix typos I introduced into bsmtp.c
1451 kes Make pm_strxxx() routines handle input of NULL pointer. This
1452 is to protect from NULL pointers returned from SQL databases.
1453 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1454 kes Add more debug to FIFO code -- fix fifo regression test.
1456 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1457 kes Add thread timer to bnet_connect() to break from OS if wait time
1460 kes Update Win32 build to include new files, new symbols, and
1462 kes Implement socket level heartbeat (tcp_keepidle)
1463 ebl Commit File relocation patch
1464 kes Make bat have 'make install' target.
1465 kes Warn during install if old gnome-console binary found.
1466 kes Warn during install if old wx-console binary found.
1467 kes Add -8 option to bsmtp command line to add content type utf-8.
1468 Fixes bug #809. (Character coding problem in bsmtp).
1469 kes If < is found in target (from, to, cc) then do not enclose the
1470 target in < > in bsmtp. Fixes bug #772 (malformed address).
1471 kes When printing certain items in dbcheck, stop after 300000.
1472 Fixes bug #822. (dbcheck loops).
1473 kes Incorrect status in Dir after waiting for mount with poll set.
1476 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1478 kes Print waiting to reserve a device every 5 mins.
1480 kes Don't call close_part in label.c if tape and relabel.
1481 kes Don't free volume if busy in close() -- should help with
1483 ebl Fix #824 RunScript bug (After script could be execute twice)
1484 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1485 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1486 Add a regression script to test RunScript
1488 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1491 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1492 deprecated. No additional bugs will be fixed, and they will be dropped
1493 in a future release (probably 2.4.0).
1494 kes Change name of wx-console to bwx-console to make it more Bacula
1496 kes Change the name of gnome-console to bgnome-console to make it
1499 kes Some time in March, a Feature Request with patch from Jorj Bauer
1500 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1502 The ability for the director to validate a Client (FD) CN against
1503 an arbitrary set of patterns rather than the hostname, with
1504 A new 'TLS Allowed CN' set of directives which are implemented
1505 in the Client resource. Then pattern matching is used in place
1506 of hostname matching against the Certificate's CN. As an example, we
1507 have certificates which (a) use a local CA, and (b) have a CN of the
1509 kes Add new/changed entry points to Win32 build
1510 kes Create unaccepted-projects for projects that are not accepted.
1511 kes Simplify locking in the reservations system.
1512 kes Add more debug code in reservations.
1513 kes Make sure error condition on reserving a volume is handled correctly.
1514 kes Correct handling of volume_in_use.
1515 kes Correct handling of initializing a device.
1516 kes Move handling of broadcasting releasing a device into release_device().
1517 kes Correct attaching dcr to dev so that it is only done if device
1518 is properly initiated.
1520 kes Locking debug level tweaks in SD.
1521 kes Tweak new Volume code.
1523 kes Add exec external-command [wait-seconds] to bconsole. This
1524 executes the external-command. Note! normally external-command
1525 should be enclosed in double quotes.
1526 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1527 it should normally be off in a production system.
1529 kes Implement die command for SD so that we can force it to dump.
1530 kes Implement SD lock debug code.
1531 kes Implement new algorithm for keeping Volume list in SD. It
1532 is now owned by the device.
1534 kes Implement new code for freeing in use volumes that should
1535 resolve if not all, some of the problems of multiple drive
1536 tape conflicts described in bug 801.
1538 kes Fix gui/bacula-web/images files in svn.
1539 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1541 ebl Fix a bug in batch mode (in string escape)
1542 kes Correct migration prune SQL typo that crept in in a
1543 recent 2.1.x change.
1545 kes Move bnet_despool() into class in bsock.c
1546 kes Modify job report to include director name and Build OS.
1547 kes Move drop root privilege and check_catalog() before fork.
1548 kes Add update database scripts (version 9 to 10) to updatedb directory.
1550 ebl Check size and age of each file after its backup to see if
1551 it has changed during backup, if 'checkfilechanges' is set.
1552 The FD will do an extra check (stat(2)) after
1553 each file backup. mtime, ctime and size are compared with
1554 'before backup' information. If time or size mismatch, an
1555 error message will be generated. You must upgrade FD to use it.
1557 kes Make database name and user configurable
1558 --with-db-name=xxx --with-db-user=xxx
1559 kes Add back database type to message.c for debugging.
1561 kes Implement dir_sql() which issues an SQL query.
1562 kes Modify bat medialist to use dir_sql() and do some minor C++
1563 formatting as well as eliminating a number of pointers, simplifing
1566 kes Fix some of the mtx-changer grep commands for tape label readers.
1567 kes Convert a number of bsendmsg into the appropriate send/warning/error
1568 message class calls.
1569 kes Suppress the using database message in the .sql command.
1570 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1572 kes Add context menu for floating a window.
1573 kes Some minor cleanup and name changes in qt-console
1574 kes Add doing mt setblk 0 in Win32 mtx-changer.
1575 kes Apply Martin's bug fix to move definition of ENODATA for
1577 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1578 sqlite2 and sqlite3.
1580 kes More pruning cleanup.
1581 kes Turn on wait_for_drive by default in mtx-changer.
1582 kes Turn on Batch insert code by default as it now passes regression.
1583 kes Add ./configure --enable-bat to enable building of Bat.
1584 No install yet though.
1586 kes Implement a new .sql command for bat.
1587 kes Implement code to turn off pruning in obtaining the next volume.
1588 Pruning is turned off for the status dir command, but turned on
1589 for SD requests and for the list nextvolume command.
1591 kes Correct Qmsg() that was not updated correctly when committing a
1592 previous change (probably the recent TLS patch).
1594 kes Write new subroutine is_volume_purged() that explicitly checks
1595 if the Volume is purged, and if so marks it as such. This should
1596 resolve problems reported about needing to mount twice to recycle
1598 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1599 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1600 amount of duplicated code.
1601 kes Do volume pruning only for the Media Type desired (reduces pruning time
1602 if multiple Media Types are in the same pool).
1603 kes Implement more detailed info in the Job report for the Bacula version
1605 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1607 ebl Add bbatch tool to bench database and insert mode.
1608 Fix sql quote stuff in batch mode
1609 Fix sql stuff for mysql
1611 kes Correct problems with am/pm scheduling. Fixes bug #808.
1612 kes Implement new prunning code that prunes up to 1000 jobs at
1613 the same time. The same technique can be applied to a number
1614 of other prune/purge subroutines.
1615 kes Add an insanity check when starting a new tape job to ensure
1616 that the tape position has not been changed. If so fail the
1618 kes Fix Win32 build for dlls to add the folllowing:
1619 src/lib/bsock.c -- new file with new entry points
1620 src/lib/dlist.c -- new entry points
1621 src/cats/sql_create.c -- new entry point
1622 src/cats/sql_cmds.c -- new DATA item exported
1624 ebl batch mode cleanup bscan-test is ok now.
1625 kes Implement SD code to check length of disk volume before appending.
1627 kes Correct return status on db_batch... routines.
1628 kes Add call to db_write_batch_file_records() to migration code.
1629 ebl Fix AfterJob timing
1630 kes Move the checking of the database in initializion of the Director
1631 to after we drop privileges. This avoids the need for both root
1632 and bacula access to the DB.
1633 kes Correct a misplaced variable definition in src/filed/backup.c
1634 kes Correct how the new batch insert db_create_attributes_record()
1635 uses the arguments. Caused a seg fault in bscan.
1636 kes Implement lock() and unlock() methods in DEVICE class.
1637 Implement block() and set_block(xx) methods in DEVICE class.
1638 kes Modify bnet_connect() so that it uses time() to check for the
1639 wait time expiring (on some OSes, some system calls may not
1640 return immediately).
1641 kes Modify Verify to obtain the previous JobId when it is actually
1642 running rather than at schedule time (as it was in 1.38.x).
1643 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1645 kes When checking pid in pid file, continue running if the pid is
1646 the same as ours. This occurs on IRIX after a system crash.
1649 kes Extend new GUI API.
1650 kes Make the ua structure a class, and implement send_msg(),
1651 error_msg(), warning_msg(), and info_msg().
1653 kes Apply fix from for building wx-console on the Mac from
1655 kes Implement new select mechanism for GUI programs.
1656 kes Reorganize initialization of stackedWidgets in bat.
1658 kes Add updated nagios plugin supplied by Christian Masopust.
1660 kes More bat implementation.
1661 kes File migrate bug with Pool Occupancy using mediaid instead
1662 of jobids. Fixes bug #795.
1663 kes Fix orphaned buffers in filed backup and verify due to
1664 crypto buffers not freed during errors. Fixes bug #789.
1665 kes Extend new GUI api code to tree commands.
1666 kes Ensure that tree and dot commands check console ACLs.
1667 kes Permit marking directory with trailing slash.
1668 kes Allow 20 console connections (instead of only 10).
1670 kes Add smartctl call to bacula-sd.conf as an example of getting
1673 kes Modify jobq.c to let simultaneous restore jobs run. This may
1674 cause them to fail if they cannot get a drive.
1675 kes Add Client Connect Wait to Storage daemon to permit users to
1676 modify the time the SD waits for a FD connection.
1678 kes Correct virtual changer check which was backwards. This caused
1679 volumes to be unloaded into slots already occupied.
1681 kes Apply Command ACL filter to JobId list in restore command.
1682 kes Correct typeo in var.c patch.
1684 kes Don't let Bacula prune File or Job records for the current Job.
1685 kes Fix variable substitution pad + inc bug reported (with patch)
1688 kes Correct SQLite log table index as reported by Luca Berra.
1690 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1692 kes Begin implementing new comm signals for API.
1693 kes Fix a few places in lib/message.c where the open fd may
1695 kes Continue implementing lib/bsock.c (real class). Make jcr,
1696 who, host, and port private. There are new methods to access
1697 them for non-class use. This required touching a number of files.
1699 kes Add LANG=C to autoconf/randpass so it works with languages other
1700 than English. Fixes bug #788.
1702 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1704 You will not be able to generate Include/Exclude list any more.
1705 It will be fixed soon.
1706 If you want to use this, you can apply
1707 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1709 kes Restore of sockets created false error messages because Bacula
1710 no longer restores sockets, but the code was still trying to
1711 set the attributes on a non-existent file. Reported by a user.
1712 ebl finish RecyclePool feature
1713 Media will takes Pool.RecyclePool
1714 when moving from Scratch to a Pool or when user will do
1715 update volume=xxx frompool
1716 To use it, add RecyclePool = aPool to your Pool resource
1719 RecyclePool = Scratch
1723 kes Expand new BSOCK class adding signal() and new BNET signals.
1724 kes Begin enhancing the dot commands adding a new API function
1725 that returns more information and will make it easier
1726 to interface to the Director from a program.
1728 kes Make DEVICE fd private. Its new name is m_fd, and can be
1729 obtained with dev->fd() outside the class. This is the
1730 first of many DEVICE members to be made private.
1731 kes Implement Michael Renner's idea on having a virtual disk
1732 changer. I made some minor modifications (e.g. I did not
1733 implement the Virtual Changer directive, but simply set
1734 the Changer Command to an empty string.
1736 kes Implement a BSOCK send() method that writes the whole record
1737 in a single write() request rather than in two.
1738 ebl add update volume=xxx recyclepool=yyyy
1739 volume takes recyclepool from pool when using update volume=xxx from pool
1741 kes Fix encryption deblocking bug, which caused some restored files
1742 to be truncated. This fixes bug #763.
1743 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1744 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1746 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1747 ebl Use btime_t instead of uint64_t in media patch.
1749 kes Optimize the use of the database a bit in the Status dir command.
1750 Only open it when needed, ensure that if any previous database
1751 was opened, it is closed.
1753 kes Correct VolCatBytes bug from media patch.
1754 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1755 in the case of orphaned records.
1756 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1757 and File records in 300K chunks to be more efficient. This
1758 idea came from Juan Luis Frances (if I remember right).
1759 kes Apply Eric's scratch patch that moves a purged Volume to
1760 the RecyclePool. Question: how is RecyclePool set? what
1761 happens to the ScratchPool?
1762 kes Apply Eric's media patch that collects read/write media
1763 times as well as byte counts. This patch requires a
1764 simultaneous upgrade of the DIR and SD. Note, there
1765 should be some way to turn off timing. I'm not sure
1766 times are in Bacula units.
1767 kes Apply Eric's batch-insert patch.
1769 kes Update projects list.
1771 kes Implement Include/Exclude file lists in FD as dlists using
1772 the new dlistString class. This permits efficiently having
1773 large include/exclude lists and completes project Item 25.
1774 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1775 console is authorized to cancel the job. This fixes bug
1777 kes Modify SD so that the VolCatJobs medium record is updated
1778 at the beginning of a Job rather than the end. This
1779 fixes bug #775 where exceeding MaxVolJobs caused jobs
1781 kes Added a mutex around getting and setting Volume information
1782 so that multiple simultaneous jobs will single thread.
1784 Switch to using Subversion
1785 kes Remove src/pygtk-console/ from configure
1787 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1788 plus the entrypoints.
1789 kes Apply patch supplied that corrects debug print
1790 in canceling jobs for max run time. Supplied as
1791 part of bug #621, which was previously fixed.
1793 kes Test on job_canceled() and sd_msg_thread_done inside
1794 loop starting the message thread to avoid a race condition.
1796 kes Remove rl_catch_signal from console.c as it conflicted
1797 with the header definition. Fixes bug #765.
1798 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1800 kes Clarify some stored/acquire messages to indicate if the
1801 problem is with read or append.
1803 kes Fix memory leak with storage ids in cats/sql_get.c
1804 kes Terminate watchdog earlier to avoid reference to released
1805 memory -- reported by Jason Austin.
1806 kes Move closing the database from jobq.c to the director daemon
1807 termination routine. This fixes memory leaks for shadow jobs
1808 (i.e. migration jobs).
1809 kes Free up the unique jobid chain items in migrate.c. This fixes
1810 a memory leak problem.
1811 kes Convert some ugly looking for statements to use foreach_alist
1812 in findlib/find.c. This will facilitate converting the structures
1813 to use dlist (for large include/exclude lists).
1814 kes Fix a bug in the btree.c and btree.h routines, then rename them
1815 rblist and add them to be built in src/lib. Include some new
1816 methods written by Rudolf Cejka that make the code more readable
1817 (hides some of the ugly casting).
1818 kes Add set_next() and set_prev() methods which make the code much more
1819 readable. Also add a new dlistString class that facilitates storing
1820 strings in dlists. To be used in the large include/exclude lists.
1821 kes Make some trivial modifications to lib/tree.h that use rblist
1822 rather than dlist for storing the tree links. This was suggested
1823 by Rudolf Cejka. The result of this is that the restore tree now
1824 uses red-black binary trees rather than simple linked lists. This
1825 should give rather dramatic speed improvements for directories
1826 contining large numbers of directories/files (more than 10000).
1828 kes Fix maxruntime bug #621.
1830 ebl Implement the include JobID in spool file name project.
1831 kes Reorder projects file in order determined by Jan 2007 vote.
1832 kes Implement item #12 on project list -- quick release of FD by
1834 kes Fix open of SQLite3 db where user does not have write permission
1835 so that DIR does not crash. Fixes bug #761.
1837 kes Add back missing @ in Win32 Makefile.
1838 kes Change 'Device not configured to autolabel' from INFO
1840 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1841 which should restart an indefinite # of times.
1842 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1843 other DIR specifications.
1845 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1846 Fix path quoting in SQLite scripts.
1847 Fix problems with SHGetFolderPath.
1849 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1851 kes Fix Job restart on error bug that promotes an Inc to a Full
1852 backup. This should fix bug #755.
1853 kes Add qt-console and first cut of code.
1857 kes Fix Bacula->Documentation link on Win32 to point to index.html
1858 instead of bacula.html. Fixed bug #750.
1859 kes Return JobId in db_get_job_record() when JobId==0. This should
1861 kes Do not release source pointers when restarting a failed job.
1863 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1864 This *should* fix bug #747.
1865 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1868 kes Modify USTORE constructor to set an empty store_source string,
1869 and don't copy the store_source string in a cancel. Hopefully
1870 this will fix Arno's seg fault, bug #744.
1871 kes Add back code to disable conio in configure. Fixes bug #743.
1872 kes Correct the Options scanner in the FD to correctly handle
1873 SHA1 option, which was eating the next option. Reported by
1875 kes Add code to indicate when the SD is spooling, spool wait, and
1876 despooling as requested by Alan Brown.
1878 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob