1 Technical notes on version 2.3
5 kes Add DataDespooling and DataCommitting status (committing is
7 kes Finish implementation of new reservations code noted below.
9 kes Fix bsnprintf for float point numbers. I broke recently when
10 parameterizing some variables. This fixes bug #1036.
11 kes Undo recent reservations changes ... will apply them later
12 when they work better.
14 ebl Fixes #1034 which cause mysql to hang the connection after 8h
15 ebl Change default statistics target of filename.name and path.path
16 fields for PostgreSQL. This speeds lookup by indexes. Thanks
18 kes A few more tweaks to new reservation code. Make sure to clear
19 vol released flag when retaking volume. When reading label and
20 label is bad mark volume unused. When recycling, mark volume
21 unused so it can be renamed.
23 kes Fix reserve_volume() so it doesn't release a volume in use
24 (i.e. a volume entry not marked released). This should be
25 the last part needed to fix bug #1018.
27 kes Move Heartbeat documentation from Job to Director resource.
30 kes Fix existing switch drive SD code to call autochanger to release
31 any old volume. This must be done to keep the autochanger from
32 releasing subsequently newly reserved volumes in doing a close().
33 This should fix bug #1018.
34 kes Fail if attempting to get console input in batch mode. This
35 should help fail RunScript console commands that are incomplete.
36 kes First cut implementing switch_drive() in SD (not actually called).
38 kes Implement first cut running console commands in a RunScript.
40 ebl Fixes bug #1028 where "Selection Type" option was not usable
42 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
47 kes Add new free_tls() entry point so that Win32 builds.
48 kes Fix compile warning in src/lib/util.c
49 kes Fix entry point for edit_job_codes() so that Win32 builds.
50 kes Fix seg fault Frank Sweetser reports in regression testing
51 on his systems. The problem was that the original author of
52 bsnprintf.c did not take into account the side effects of
53 using ++x in the argument to a #define.
54 kes Make SD protocol backward compatible with version 2.2.x.
56 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
57 because Bacula no longer restores sockets.
58 ebl Always use ignorecase fileset option on win32 FD.
60 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
61 that implements double quoting include names in conf files,
62 and also allows piping input by having the first character
63 be a vertical bar (|).
64 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
65 that implement %f in RunScripts to pass the FileSet name.
66 kes Skip leading | when lex input comes from a pipe as suggested
67 by Michael Stapelberg <michael@stapelberg.de>.
69 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
70 Nerijus Baliunas <nerijus@users.sourceforge.net>
72 kes Implement Plugin Directory and plugin events.
74 kes Implement a security enhancement: TLS authentication but no
75 encryption. Enabled by setting 'TLS Authentication = yes'.
76 Note when this is on, TLS encryption is turned OFF!
78 kes This patch corrects a problem where the maximum concurrent storage
79 jobs counter gets out of sync during restore jobs causing jobs to
80 'wait on max Storage jobs'. This patch fixes bug #1009.
82 kes This patch fixes bcopy so that it produces correct Volumes.
84 kes This patch eliminates spurious output to the console during a VerifyVolume
85 job that contains encrypted data. It fixes bug #1024.
87 kes This patch prevents the 'status dir' command from trying to use a scratch
88 volume and possibly moving it from one pool to another. This patch fixes
91 kes Add new include to postgresql.c suggested by Marc Cousins so
92 that it compiles correctly with pgre version 8.3.
94 kes Fix --archivedir addition to configure. Replace it with
95 --with-archivedir in configure.in This fixes the regression
97 kes This patch fixes bug #1012 where the job is canceled because
98 of Max Run Time exceeded when the job has not yet started.
100 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
101 one 'part' to write. Instead of each part being stored on disk,
102 written to DVD, then deleted from disk, all parts are written to disk,
103 and only the last is written and deleted from disk.
104 kes This patch fixes the status command to include the formating string for
105 JS_AttrInsterting. It fixes bug #1021.
106 kes This patch should fix the Mac OS X build problem on the latest
107 Darwin, where sys/types.h was not included correctly (apparently
108 due to a change in the Mac headers). The solution was to explicitly
109 ensure that it is defined for the ./configure.
110 This patch also has a rebuild of configure that includes the Debian
111 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
112 kes This patch should ensure that queued messages to the console are
113 displayed as soon as possible. It should fix bug 1007, but has been
114 reported not to work.
116 kes This patch fixes the infinite loop when trying to increase the
117 maximum number of volumes in a Pool during the add command.
118 This patch fixes bug #1008.
120 Release Version 2.2.6
122 db Remove extra data on estimate command in joblist for bat.
124 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
125 really change anything, but is the beginning of doing it *right*.
126 To do it completely right the LastWritten date must be passed to
127 the SD, but it is not yet done.
128 kes Minor tweaks to some bat restore SQL.
129 kes This patch fixes bug #1003 where putting the message output from
130 a Verify job into the catalog results in a recursive loop. The problem
131 seems to show up only with postgresql (to be verified).
132 kes Correct %x to %p in postgresql debug statement.
134 kes Fix bug #942 where lots of emails where generated when the heartbeat
135 interval was low and Bacula wanted a different tape from the one in
138 ebl Add new SD despooling attributes and Dir inserting attributes
139 job status codes in the catalog (Status table).
141 ebl Use qmake-qt4 instead of qmake when available (debian system).
143 kes Add a security warning to src/cats/make_catalog_backup.in indicating
144 that passing the password via the command line (arg 3) is insecure.
145 This responds to bug #990 (it doesn't fix it).
147 kes Set default debug_level to zero. This corrects bugs #991 and #993.
148 kes Fix a crash in bat when it cannot connect to the Director for example
149 if the Director is not running.
150 kes Remove redundant INDEX (JobId) from File table in the trunk.
152 kes Make explicit exception to GPL in LICENSE to permit linking
153 the Win32 FD with Microsoft VSS code.
154 kes Apply the Solaris package patch from
155 Masopust, Christian <christian.masopust@siemens.com>
156 kes Apply the patch to optionally add a timestamp in the debug output
157 submitted by Mariusz Czulada <manieq@wp.eu>.
159 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
160 backend (sql_strerror). Fixes bug #989
162 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
163 It applied with no problems.
164 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
166 kes Redirect stderror to stdin on mt status command in mtx-changer.in
167 since the status is returned on stderr on Solaris.
168 kes Activate Close button on tray-monitor window. This fixes
170 kes Check for NULL item in parse_conf.c before calling it. In the
171 case of Device, there is no item and this caused a seg fault when
172 Device appears in the conf file.
173 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
174 avoids pulling in config.h multiple times in some new code.
176 kes Fix spurious warning message printed when creating a volume with
177 a LabelFormat. This fixes bug #976.
179 Release Version 2.2.5
181 kes Add JobId in place of Job name in all the Jmsg() output.
182 kes Correct the APP_DESC for the Win32 storage service (remove an e).
184 kes Make maxvol-test and new more strict maxvol2-test work.
185 kes Print JobId in all Jmsg() job output.
187 kes Add new SD despooling attributes and Dir inserting attributes
188 job status codes. This fixes bug 961.
189 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
191 kes Fix doc issue. This fixes bug #963.
192 kes Fix listing performance problems in bat. Pointed out by
194 kes Remove old debug code.
195 kes Fix bat code that tests for Win32. This should fix bug #968
196 kes Query 5 list wrong Vol after migration. This fixes bug #960
198 ebl Fix #969 where user can't change Replace option in restore menu.
200 kes Save jcr in thread specific data (tsd) for each thread.
201 kes Make Dmsg() print JobId as -%u.
202 kes Make Jmsg, Emsg, and others automatically pickup the jobid
203 for the thread if it exists.
204 kes Remove old reservation debug jid code.
205 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
206 ebl Add an option that permit to specify spool size in job
207 definition. (Applying patches/testing/spoolsize_per_job.patch).
208 You must upgrade SD and DIR at the same time.
209 dvl Add new configuration item --archivedir
210 dvl Adjust regression tests to use tmp not /tmp. This will allow
211 multiple concurrent runs of the regression tests.
213 kes Fix race condition that drops final block written to volume.
214 This happens in rare cases with multiple simultaneous jobs
215 when the Volume fills. This fixes bug #964. May be related
216 to bug #935 and possibly #903.
217 kes Eliminate more strerror() and replace with bstrerror().
218 kes Remove BSD getopt and replace with unrestricted IBM version.
219 kes Fix Win32 build for changed calling sequences.
220 kes More tweaks to the mount volume routines to get everything
221 right. Changed variable name from find to have_vol, which is
222 much easier to understand.
223 kes Enhance btimer debug code.
225 kes Fix FD->SD authorization failure, which was due to spurious
226 wakeups from a pthread_cond_timedwait(). Simply check the
227 predicate before continuing. This fixes bug #953.
228 kes Add const char where needed (more to do). Remove temp debug code.
230 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
231 kes Don't overwrite error message in check_tables_version.
233 kes Unlock batch insert tables with same calls used elsewhere.
234 kes Allow starting 59 jobs a second.
235 kes Make SD session key more random.
236 kes Add retry for SQLite opening db if it fails. Probably helps
238 kes Suppress extra error messages during batch insert failure.
240 kes Add jcr to timer packets so if killed message can be sent to job.
241 kes Add JobId to all Dmsg() output.
242 kes Put some FD auth code on dbglvl rather than fixed.
243 kes Return insert attributes error message in db msg buffer to avoid
244 false error messages. Helps fix bug #966.
245 kes Separate batch init error messages. Probably helps fix bug #966.
246 kes Make SD code that contructs attribute insert check string lengths
248 kes If Dir gets an error during inserting attributes, cancel SD.
249 This reduces unnecessary error messages.
251 kes Correct search boolean for getting Volume info
252 ebl Cleanup batch insert code. Probably fixes bug #965.
253 kes Back out one small change to the reservation system (reserving a volume).
254 kes Rework how a Volume is mounted. It is now much more intelligent and
255 will always attempt to use any mounted volume if possible and reduces
256 calls to the Director asking about volumes.
258 kes Turn off some code when batch insert not enabled.
259 kes Edit FD name in connect error messages.
260 kes Rework the reservation system to take into account that the Director
261 might give us a Volume that is different from the current one being
262 used, and to ensure that we don't exceed Maximum Volume Jobs.
263 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
264 fatal error with multiple jobs running'
265 kes Add more debug code in reservation system.
266 kes Implement maxvol-test to check bug #947.
268 kes Add code to handle tray monitor separated from Win32 FD.
269 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
271 kes Add missed return in fixing verify bug -- trunk only.
272 ebl Fix a command parser issue causing a director segfault.
273 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
275 kes Increase the max block size to 4MB fixes bug #957.
276 kes ERABT if user sets min block size > max block size. Fixes bug #956.
277 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
278 is not properly mounted (recognized) during a poll.
279 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
280 Job that has differences reports Verify OK.
281 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
283 ebl Add an option to operate on all pools with update vol parameters.
284 This complete the project 20. Patch from Nigel Stepp.
285 ebl Add history support to bconsole when using readline.
286 Using Ctrl-D to exit doesn't update .bconsole_history
287 kes Modify new volume algorithm to use max MediaId for generating next
288 volume number rather than the count of Volumes. This should essentially
289 eliminate the failure rate if some volumes were deleted. Bug #921.
290 kes Begin implemention of Optimize Job Scheduling.
291 kes Implement restore callback that Dirk and I agreed on for bat
292 restore. This fixes bug #928. Restore of backup of zero files fails.
293 kes Fix SQL Catalog logging which broke with new db_escape_string
296 Release Version 2.2.4
298 kes Fix bacula_cats.def for new db_escape_string().
299 kes Increase size of name string when FD making connection to SD.
300 May fix bug #953. FD->SD connection failure.
302 kes Add code to help Dan debug 2drive-incremental-2disk test.
303 kes Add code to try to fix bug #908.
304 kes Add waits to multiple exit detection code to try to force pid
305 file to always be deleted.
306 kes Restore good dev.tar.gz to rescue set appropriate binary property.
308 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
309 trying to switch drives by checking for blocking before unblocking.
311 kes Cancel storage daemon in all cases where FD reports error. This
312 should fix virtually all cases of bug #920.
313 kes Fix db_escape_string() for MySQL which did not compile.
315 kes Fix error message that was clobbered when Dir tells SD it does not
316 have write permission on Volume. This should fix a minor point
317 in bug #942, but not the main problem.
318 kes Add code to cancel job in SD if FD connection fails. This should
320 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
321 dvl Pass jcr and db into db_escape_string() to enable better escaping
323 kes Fix migration code to get correct Volume name with multiple volumes
324 by skipping |. Fixes bug #936.
325 kes Implement patch supplied by Landon to fix bug #944 where using
326 TLS with bconsole uses 99+% of the CPU.
327 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
329 kes Move patches into patches directory.
331 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
334 ebl Using 'm' in bconsole will show messages like before,
335 and not memory usage.
336 kes Fix bug #935, and probably also bug #903 where files were not
337 restored. MediaId was not properly set in JobMedia record after
340 kes Suppress chown and chmod error messages if the FD is not running
343 kes Apply Martin Simmons' patch that should turn off the new API usage
344 when batch insert is turned off allowing building on older
346 kes Add ./configure search in qwt-qt4 for qwt package
348 kes Bacula is now free of 3rd party GPL copyrighted code!
350 kes Add guid_to_name.c/h which replace idcache.
351 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
353 ebl Detect if new PosgreSQL batch insert API is present.
354 kes Correct incorrect mempool call causing Director crash. Occurs on
355 systems without va_copy().
356 sb Update spec files for 2.2.1 release
358 kes Fix memory pool call in ua_output.c. bug #934.
359 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
360 Add test program to fnmatch.c
362 kes Integrate patch to README.vc8 from
363 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
364 edit it to get it into Unix patch format.
365 kes Implement mkpath.c to replace old FSF makepath.c
367 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
369 Release Version 2.2.1
371 kes Update POTFILES.in
372 kes Cleanup a few underquoted AC_DEFUNs in configure
373 kes Apply patch from Martin Simmons that adds a test for va_copy to
376 kes Fix bug #921 by increasing the number of tries to create a new volume
378 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
379 can be called multiple times. Implement a version for machines
380 without va_copy() that gets a big buffer.
382 kes Integrate more portable zone offset code into bsmtp.c
383 Submitted by Attila Fülöp.
385 kes Fix bad SD->FD return status reported by
386 (James Harper) <james.harper@bendigoit.com.au>
387 ebl Fix a bug in read_close_session which return random status
388 thanks to James Harper
390 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
391 and directory names during restore of single file/directories.
392 kes Add sanity checks to .sql command when string is empty. Hopefully
393 that will resolve Dirks Director crash.
395 kes Apply patch submitted by Martin Simmons that corrects a seg fault
396 in the bsmtp chat subroutine when debug is >= 10.
398 kes Fix Director crash when running bat SQL queries.
399 kes Add David's notes on Item 8: Copy pools.
401 kes Rework projects file to be current and ready for a vote.
402 kes Enhance lex scanner error message.
404 kes Tweak LICENSE file to mention BSD code.
405 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
406 if specified on the ./configure.
407 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
408 This class is intended to allow us to open a second bsock to the
409 Director while in the restore subdialog.
411 kes Fix configure to create bat Makefile before creating dependencies.
412 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
413 kes Add a tooltip to the tray monitor.
414 dvl Set the Director's PID file before dropping privs. This fixes
417 kes Update AUTHORs file
418 kes Increase the default max concurrent jobs to 20 in FD and SD to
419 correspond with the default .conf files.
420 kes Rewrite the Win32 service routines. This eliminates the 3 copies
421 some different, of the same file created by RN when porting the
423 kes Rearrange some of the Win32 directories and the placement of the files
425 kes Set DEVELOPER flag in version.h
427 ========================================================================
428 Release Version 2.2.0
430 kes Apply a second doc patch from Marc.
431 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
432 improves the tips section that discusses how to setup multiple
435 kes Update bat README file.
436 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
437 corrects a typo in the Recycle status check in db_find_next_volume().
438 This will probably fix a number of annoying problems with multiple
440 kes Modify most of dird/msgchan.c to use bsock class calls rather than
441 bnet calls -- no functionality change.
443 kes Modify the Verify output to specify if files are missing on
444 the Volume(s) or disk. Fixes confusion in bug #916.
445 kes When more than one Volume is read in a migration job, the last
446 Volume bytes reported are from the last read volume rather than
447 the last written volume. Fixed. This fixes bug #910.
448 kes Fix display of Recycle flag after update volume=foo recycle=yes.
449 It previously printed New Recyle flag is: no. This fixes bug
452 kes Correct seg fault when switching tape drives during restore.
453 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
454 be used until after 2.2.0 release.
456 kes Remove fnmatch() in SD that permitted wild card specifications.
459 kes Fix %g in filename returned by SQL for browse tree reported by
461 kes Fix configure so that it puts config.out in the cwd rather than
463 kes Attempt to fix the locking problem reported by Eric in bug #906.
464 kes Make berrno class to leave errno unchanged after constructor call.
465 kes Make bnet_server use the heap rather than the stack to allocate
466 its socket fd pointers to avoid a crash at termination. Problem
467 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
469 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
470 and putting it in depkgs-qt along with Qt4.3.
472 kes Rework code in acquire.c that switches drives for reading when
473 the Media Type does not match. This should fix bug #906
475 ebl Fix a director segfault during job setup #907
476 kes Correct seg fault in postgresql when first operation returns no
477 rows. Fixes Dirks File browser problem seg fault with bat.
479 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
480 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
483 kes Implement PopUp YES/NO dialog for bat.
485 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
487 kes Correct RunScript to terminate job in FD on failure.
488 kes Change abort_on_error and AbortJobOnError to fail_on_error
489 and FailJobOnError in RunScripts.
490 kes Minor tweaks of code formating in RunScripts, principally to
491 avoid depassing 80 columns.
493 kes Eliminate one #ifdef Win32 in bsmtp
494 kes Implement grow tool to grow a file for testing very large databases.
495 kes Add big-vol-test to test Bacula seeking with > 5GB.
498 kes Modify find_next_volume() to return all values in Media record.
499 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
503 kes Update Release notes
505 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
506 Warning, in previous beta version, all media get from scratch keep their
509 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
510 This should fix bug #842. Made a note to look at removing the temp
511 files at the end of the install.
512 kes Add ability to mount and unmount a file device providing it is
513 marked as being removable and has the appropriate mount and unmount
514 commands defined in the Device resource. This fixes bug #830.
515 kes When applying a storage override, release all previous storage
516 definitions rather than just prepending the new storage.
517 This should prevent a good deal of confusion.
519 kes Implement ./configure search for qwt libraries.
521 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
522 Win32 FD. This should fix bug #893.
523 kes Remove an unnecessary beep in Win32 init code.
524 kes Update copyright dates in Win32 executable about boxes.
525 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
526 code with a BSD getopt.c and getopt.h.
527 kes Remove sched.h from the Win32 compat directory -- not used.
528 kes Remove the Exit menu item from the Win32 tray monitor. If you really
529 need to shut it down, do it through the services panel or the command
531 kes Remove some inappropriate Bacula FSFE copyrights.
532 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
533 kes Fix regress config non-portable test as pointed out by
534 Florian Heigl <florian.heigl@gmail.com>
535 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
536 as pointed out by Florian Heigl <florian.heigl@gmail.com>
538 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
539 Reported by Frank Sweetser.
543 kes Fix client-only build.
544 kes Integrate client-only fixes for bsys (initgroups) and conio from
545 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
546 kes Make arguments to get_scratch_volume() in same order as other
548 kes Rework the prune_volumes() subroutine so that after purging and
549 no volume found in desired pool, it will check for a scratch
550 volume. This prevents recycling the whole scratch pool.
551 kes Add code to status storage to print boffset_t (largefile support).
553 kes Move qwt (Graphics libarary for Qt4) to depkgs.
554 kes You now need a --with-qwt=<dir> to be able to build bat.
555 kes Update src/win32/cats/bacula_cats.def to include the new
556 db_get_query_dbids() call on Win32.
558 kes Correct a problem when selecting a scratch volume and moving
559 it to another pool that lost some columns.
560 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
561 kes Enhance Autochanger error messages to include Volume and device name.
562 kes Rework prune_volumes() code to take account of InChanger flag,
563 and to handle recycling volumes going to the Scratch pool and
564 current pool because the RecyclePool directive.
565 kes Implement a better and more efficient db_get_query_dbids() to
566 handle creating and passing back a list of DBIds.
570 kes Start work on new more efficient DBId subroutine. First use
571 will be for recycling volume to Scratch inchanger.
572 kes Increase number of JobIds in pruning from 1000 to 10000.
573 This to be replaced by above routine.
574 kes Begin implementation of building Qt4 on Win32.
575 kes Correct typo in fix I added for bad TLS shutdown.
576 kes Pull 2.0.3 patches into patches directory.
577 kes Update Release notes. Include qt-console in line count.
578 kes Update Projects file.
580 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
581 bug in migration code where a job that spanned two volumes
584 kes Implement new BST_DESPOOLING blocked state. Change from locking
585 during despooling in SD to blocking. This means that other threads
586 can work with the device structure, in particular the reservations
587 system while despooling.
589 kes Fix return in reservation message queue that missed clearing
590 the jcr lock (implemented 26Jun07 below).
591 kes Rename a number of dev methods to make locking function names
593 kes Document locking in lock.c. Move lock structures to new file
596 kes Move reservations message lock to lock jcr only this
598 kes Move main SD locking code into lock.c (new file).
599 kes Update Win32 build to include lock.c
603 kes Dirk committed the qwt library code for drawing graphs in bat.
604 kes Tweak install of qwt so that it is integrated with ./configure.
606 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
607 out by Eric (my typo).
608 ebl Fix configure.in to get batch mode enable
609 kes Return correct string from authenticate.cpp in bat when connecting
611 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
612 spurious line drops when using TLS.
613 kes Do not file reparse points when restoring a file that already
616 kes Implement Windows reparse points -- similar to directories, but
617 we do not descend into it. This is a first cut. They seem to
618 be backed up, but restore is not yet tested.
619 kes Remove restore_blocking in tls code when shutting a socket to leave
620 it in blocking mode. Hopefully this will fix the encryption bug
621 reported by Frank Sweetser.
622 kes When opening a file for backup, tell the OS that we are going to
623 read it sequentially -- optimization.
624 kes Change variable names in authenticate_director() to not conflict
625 with member names in bat. Caused great confusion with compiler,
628 kes Queue openssl error messages in case of comm problem.
629 kes Do shutdown() call if socket terminated.
630 kes Remove some duplicated code in tls.c
631 kes Move more of the bsock member variables into private and access
633 kes Add Frank Sweetser's tls-test to the regression suite.
635 kes Add Swedish sv.po file
637 kes Don't print clock skew message in FD if less than 3 seconds diff.
638 kes Add a bit of VSS info to status client.
639 kes Implement a first cut of Vista VSS, using Win2003 code.
643 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
644 loaded tape but uses first drive).
645 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
646 This was indeed a Win32 issue.
648 kes Simplify search of autochanger for in-use Volume.
649 kes Fix exit condition of check for in-use volume. kes Remove
650 inappropriate my_postgresql_free_result() in db_close()
652 kes Fix bad return in FD when encryption signature not found.
653 Probably caused a crash.
654 kes Inhibit missing encryption signature error messages for
655 file types where no signature computed.
656 kes Correct inverted check on autochanger in reservation system.
657 kes Tweak debug code in autochanger reservation.
659 kes Add some additional locking in the cats directory in subroutines
660 that modify packet variables called from batch insert.
661 kes Rework how dcrs are allocated. new_dcr() can now be called
662 with an existing pointer, and it will simply clean it up.
663 This allows the reservation system to test various different
664 devices, and will permit easy device changes.
665 kes A bunch of changes all over to handle new new_dcr() calling
667 kes Work more on the Volume management in the SD. Remember Volumes
668 for tape drives and for autochangers (even virtual disk changers).
669 kes When looking at the Volume list to reserve a drive, handle
670 autochanger names correctly by interating through the changer
671 devices. Also call the Director to see if a Volume is suitable
673 kes Fix some bugs in bscan. Make sure all media records are written.
674 Make sure that valid JobMedia records are written for disk files.
675 Previously they were completely wrong.
676 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
677 that the URLs don't change and so that the developers will all
678 work off the same copy. Rebuild from scrach.
679 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
683 kes Fix seg fault in FD from incorrect digest size.
684 kes Fix argument to non-OpenSSL crypto.c subroutine.
688 kes Remove a few malloc()s from the encryption code.
689 kes Use the class calls to bsock in filed/backup.c and restore.c in
690 place of the old bnet_xxx code.
691 kes Implement code that does an on the fly calculation of the
692 signing digest during restore of encrypted files. It makes
693 a best guess at the algorithm, and if it is not correct, will
694 then revert to the old code which reads the file after it is
696 kes Implement at least one missing crypto stream in stream_to_ascii()
697 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
698 #877 where a reload with bad syntax causes Dir to exit.
700 Cut: 2.1.14 beta (not released)
702 kes Do not free a volume on a tape drive until another volume is
703 mounted and read, or the autochanger unloads the volume.
704 This should help the SD re-use volumes that are already mounted,
705 and should fix bug #886.
706 kes Apply patch from user brettedgar that allows gnome2-console include
707 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
708 kes Apply patch from Lucien Weller that fixes day of week calculation
709 because of DST flag problem. Fixes bug #887.
711 kes Move find_next_appendable_volume() to after acquiring a valid device
712 in reserve.c. This fixes bug #864 -- confirmed by reporter.
714 kes Unable to reproduce bug 872. However added additional testing for
716 kes Bug #874 resolved by documenting SQLite limitations.
717 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
718 kes Bug #881 resolved by removing typo in mtx-changer script.
719 kes Made Frank Sweetser's wiki the official Bacula wiki with his
720 approval. Added a link to the wiki on the web page, and implemented
721 a backup from http://paramount.ind.wpi.edu
723 kes Fix update allfrompool to pass pool name.
725 kes Convert to pure GPL v2 license.
726 kes Fix sscanf problems reported by Peter Buschman that caused
727 a bus error on Solaris.
728 kes Rework (simplify) the select prompt in bat.
729 kes Move get_jobid_from_tid() into lib and create a
731 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
732 should definitely fix the problem of lost error messages in the
734 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
735 kes Eliminate tcpd.h from the project. Enclose the #include from the
736 library with extern C ...
737 kes Add print of signal name when a signal is trapped.
741 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
743 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
744 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
745 makes SQLit3 run 30 times faster, though a bit less safe.
746 kes Implement --with-batch-insert in configure and detection of thread
747 safe libraries. It is on by default, but turned off if no thread
748 safe library (e.g. SQLite 2) is available.
750 kes Fix Bacula PostgreSQL buffer overruns.
751 kes Do better checking for NULL results returned from PostgreSQL;
752 implement retry for failed queries; clear results buffer after
753 failed query. Hopefully this will correct the PostgreSQL failures.
755 kes Implement algorithm to handle only one appendable volume with
756 Prefer Mounted Volumes = no.
757 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
758 returned from a query.
759 kes Make volume lock recursive.
760 kes Implement an additional volume reservation algorithm that
761 starts by considering all reserved volumes then uses the
762 old brute force algorithm of searching the resources to
763 find a suitable device.
764 kes Add new reservations debug code and refine the old code.
765 kes Update the win32/dll/bacula.defs file.
767 kes Tweak reservations algorithm to permit a few more cases, i.e.
768 volume reserved, but on different drive, ...
769 kes Enhance SD status to include Pool and Media Type for drive in a
770 more readable format (a bit longer).
771 kes Fix PostgreSQL double free.
773 kes Minor refactoring of restore decryption code.
774 kes Add code to smartall.c to detect double free of a buffer.
776 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
777 so that bsmtp will create a correct email address (mailbox only).
778 kes Modify 'memory' command so that the buffers are listed as 'In use'
779 to avoid confusion with Orphaned buffers.
780 kes I reworked the OpenSSL include/lib flags to be handled in
781 the standard Bacula way, which should fix bug #863 concerning
782 non-standard OpenSSL libraries.
784 kes Implement Help Browser window for bat.
785 kes Fix reload bug that reset StorageId to zero.
787 kes Fix TLS #ifdefing when TLS turned off.
788 kes Ensure that when labelling a tape with Slot=0 that InChanger
790 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
792 kes Add StartTime to final uar_sel_jobid_temp query so that we can
793 add DISTINCT (required by PostgreSQL).
794 kes Implement BSOCK authenticate_director() method. Eventually will
795 authenicate all daemons.
796 kes Move several more functions into the BSOCK class.
798 kes Add code to tell the OS that we no longer need a cached
799 file that we were reading. In findlib/bfile.c. Also,
800 only cache files that we are reading. Thanks to
801 Tobias Oetiker <tobi@oetiker.ch> for the idea.
802 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
803 kes Implement script to automatically generate cats and dll .def
805 kes Update README.mingw32 to include new .def file generation.
806 kes Correct typo in UTF-8 error message as reported by:
807 jhernandez <julianhernandez@gmail.com>
808 kes Add additional sm_check() code on debug level 1.
809 kes Set default debug level to 1.
810 kes Trap SIGABRT in attempt to get traceback.
812 kes Reduce bat connect timeout from 30 to 15 seconds.
813 kes More restructuring and implementing BSOCK class in place of
815 kes Remove a few unnecessary malloc() tests in crypto code.
816 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
817 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
818 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
820 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
822 kes Fix Verify InitCatalog. The attributes were not pointing to the
823 correct saved location.
824 kes Implement message callback so that GUI is sure to get all
825 daemon messages. Currently displayed in a dialog in bat.
826 kes Ignore SIGUSR2 (Bacula timer) in bat.
827 kes Apply regress patch from bug #859 to allow regress to work
828 with Solaris compiler.
830 kes Begin adding TLS support to bat.
831 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
832 clean up lex.c and make it more readable.
834 kes Move more bnet functions into the BSOCK class.
835 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
836 kes Complete change of berrno strerror() method to bstrerror()
840 kes Cleanup incorrect email addresses in bsmtp.
841 kes Make bat display initial messages rather than discard them.
843 kes First cut of adding .mod to the run command.
844 kes Implement auto display of messages in bat.
845 kes Enhanced preferences to allow all Bacula output to be
848 kes Try to make bsmtp date routines more generic.
849 kes Fixed bug #856 autochanger documentation.
850 kes Rework bsmtp date editing for Win32. This fixes bug #854.
851 kes Add new cats entry point so Win32 builds.
853 kes Attempt to fix bsmtp date editing on OSes without %z editing.
855 kes Do better checking for the MySQL 64 bit libraries looking for both
856 .a and .so libraries.
857 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
858 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
859 kes Require the thread safe version of MySQL during configure. Thanks
860 to Andre Noll for pointing this out.
861 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
862 continuing in migration code.
863 kes Apply implementation of tray-monitor font derived from gnome-console
864 submitted by Andreas Piesk <a.piesk@gmx.net>
866 kes Eliminate important memory loss in SQLite
867 kes Fixed the batch insert MySQL thread specific data that was not
868 being freed. See cats/mysql.c:db_thread_cleanup().
869 kes Fix restore before command.
870 kes Convert old hdr.name to name() in a few places.
871 kes Implement update jobid command.
872 kes Return all time_t dates in db_get_job_record()
873 kes Stop watchdog in SD earlier.
874 kes Put Pool just after Storage in please mount message.
875 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
878 kes Update the po files.
879 kes Fix Verify InitCatalog by making it cache attributes.
881 kes Change name bacula-bat to bat for man 1 page to correspond to
883 kes Check for client and store NULL pointers in status command. This
885 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
886 kes Fix sign extended editing of %p.
887 kes Clean out a little old #ifdefing in cats/mysql.c
889 kes If time diff between DIR and FD is more than 600 seconds convert
890 INFO message to WARNING.
891 kes Implement heap size display in status for all daemons.
892 kes Attempt to fix MySQL db open memory loss (not successfull).
893 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
894 kes Eliminate memory loss in MySQL (possibly other SQLs) during
895 Query. This looks like a MySQL but but by doing extra releases,
896 the memory goes away. This should fix bug #847.
898 kes When backup fails, cancel SD before waiting for sd termination.
899 kes If SD is waiting for FD to connect during cancel, wake up the
901 kes Fix fsf code so that errno is correctly reported.
902 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
904 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
905 so that Bacula doesn't later stumble into a seg fault.
906 kes Use the term Restore Client in the restore Job report.
907 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
908 the original job's FileSetId.
909 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
910 spooling in migration jobs. Not yet tested.
911 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
912 reading conf file from a pipe. However, do it with open_bpipe()
913 rather than popen. Not yet tested.
915 kes Fix an ugly bug where the VolCatBytes were getting updated
917 kes Implement bconsole memory command that prints current memory
918 usage, plus smartalloc dump.
919 kes Clarify some error messages in backup, admin, and migrate.
920 kes Shrink label dialog to smaller size.
921 kes Invert Cancel OK buttons on restore to be OK Cancel.
922 kes More strerror() to bstrerror() conversions.
924 kes Start implementing bstrerror() in place of strerror().
925 kes Stripping path -- seems to work.
927 kes Prevent door and port files from being restored (mostly
929 kes Free an unreleased buffer in compat code.
930 kes Change console Job name from *Console* to -Console- to eliminate
931 Win32 filename problems. Put Win32 path separator when creating
932 Console file. This fixes bug #846.
933 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
935 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
937 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
938 to force Win32 error message.
940 kes First cut strip path. The data should be passed to the FD,
941 but nothing is done with it yet.
942 kes Enhance the digest and signature routines in the crypto
943 library to accept a JCR and to use it to print error messages
944 so that they will go in the Job report rather than the daemon's
946 kes Simplify some of the verify signature code.
947 kes Simplify a few of the alternative returns in the signature
950 ebl Use only POSIX regex instead of GNU regex in breg.c for
951 File relocation. It fix broken freebsd compilation.
952 kes Convert all other Dir files to use new ua class message
954 kes Tentative fix for missing digest signature in bug 807.
955 kes Correct handle problem in new win32_ftruncate routine.
956 kes Convert ua_purge.c and ua_update.c to use new ua class
957 message routines for bat.
959 kes Correct incorrect installation of LICENSE in Win32 installer.
960 kes Display LICENSE at the beginning of the Win32 install.
961 kes Attempt to correct the need for the png files to be installed
963 kes Reapply my bat.conf install script in qt-console. I think I
964 editted bat.pro instead of bat.pro.in and it was lost.
965 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
966 the /var/lock/subsys for subsysdir. Also corrects typos in the
969 kes First cut update job.
970 kes Correct configure to include qmake of src/qt-console directory.
972 kes Make restore job yes/mod/no print in one command so GUI works.
973 kes First cut implementing backup and restore client.
974 kes Correct editing in Verify output that caused a seg fault.
976 kes Insure that bat.conf is not overwritten during installation.
977 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
978 while I was implementing migration in March 2006 !
980 ebl Cleanup file relocation, using char *RegexWhere instead of
981 char *where + bool where_use_regexp
982 kes Update some manpages and add bat manpage.
983 kes Make a first cut at converting bacula.spec.in for bwx-console
985 kes Apply patch from John Goerzen to add hostname as fourth argument
986 to make_catalog_backup script.
987 kes Fix typos I introduced into bsmtp.c
988 kes Make pm_strxxx() routines handle input of NULL pointer. This
989 is to protect from NULL pointers returned from SQL databases.
990 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
991 kes Add more debug to FIFO code -- fix fifo regression test.
993 kes Implement posix_fadvise in FD, and for reading spool files in SD.
994 kes Add thread timer to bnet_connect() to break from OS if wait time
997 kes Update Win32 build to include new files, new symbols, and
999 kes Implement socket level heartbeat (tcp_keepidle)
1000 ebl Commit File relocation patch
1001 kes Make bat have 'make install' target.
1002 kes Warn during install if old gnome-console binary found.
1003 kes Warn during install if old wx-console binary found.
1004 kes Add -8 option to bsmtp command line to add content type utf-8.
1005 Fixes bug #809. (Character coding problem in bsmtp).
1006 kes If < is found in target (from, to, cc) then do not enclose the
1007 target in < > in bsmtp. Fixes bug #772 (malformed address).
1008 kes When printing certain items in dbcheck, stop after 300000.
1009 Fixes bug #822. (dbcheck loops).
1010 kes Incorrect status in Dir after waiting for mount with poll set.
1013 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1015 kes Print waiting to reserve a device every 5 mins.
1017 kes Don't call close_part in label.c if tape and relabel.
1018 kes Don't free volume if busy in close() -- should help with
1020 ebl Fix #824 RunScript bug (After script could be execute twice)
1021 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1022 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1023 Add a regression script to test RunScript
1025 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1028 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1029 deprecated. No additional bugs will be fixed, and they will be dropped
1030 in a future release (probably 2.4.0).
1031 kes Change name of wx-console to bwx-console to make it more Bacula
1033 kes Change the name of gnome-console to bgnome-console to make it
1036 kes Some time in March, a Feature Request with patch from Jorj Bauer
1037 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1039 The ability for the director to validate a Client (FD) CN against
1040 an arbitrary set of patterns rather than the hostname, with
1041 A new 'TLS Allowed CN' set of directives which are implemented
1042 in the Client resource. Then pattern matching is used in place
1043 of hostname matching against the Certificate's CN. As an example, we
1044 have certificates which (a) use a local CA, and (b) have a CN of the
1046 kes Add new/changed entry points to Win32 build
1047 kes Create unaccepted-projects for projects that are not accepted.
1048 kes Simplify locking in the reservations system.
1049 kes Add more debug code in reservations.
1050 kes Make sure error condition on reserving a volume is handled correctly.
1051 kes Correct handling of volume_in_use.
1052 kes Correct handling of initializing a device.
1053 kes Move handling of broadcasting releasing a device into release_device().
1054 kes Correct attaching dcr to dev so that it is only done if device
1055 is properly initiated.
1057 kes Locking debug level tweaks in SD.
1058 kes Tweak new Volume code.
1060 kes Add exec external-command [wait-seconds] to bconsole. This
1061 executes the external-command. Note! normally external-command
1062 should be enclosed in double quotes.
1063 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1064 it should normally be off in a production system.
1066 kes Implement die command for SD so that we can force it to dump.
1067 kes Implement SD lock debug code.
1068 kes Implement new algorithm for keeping Volume list in SD. It
1069 is now owned by the device.
1071 kes Implement new code for freeing in use volumes that should
1072 resolve if not all, some of the problems of multiple drive
1073 tape conflicts described in bug 801.
1075 kes Fix gui/bacula-web/images files in svn.
1076 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1078 ebl Fix a bug in batch mode (in string escape)
1079 kes Correct migration prune SQL typo that crept in in a
1080 recent 2.1.x change.
1082 kes Move bnet_despool() into class in bsock.c
1083 kes Modify job report to include director name and Build OS.
1084 kes Move drop root privilege and check_catalog() before fork.
1085 kes Add update database scripts (version 9 to 10) to updatedb directory.
1087 ebl Check size and age of each file after its backup to see if
1088 it has changed during backup, if 'checkfilechanges' is set.
1089 The FD will do an extra check (stat(2)) after
1090 each file backup. mtime, ctime and size are compared with
1091 'before backup' information. If time or size mismatch, an
1092 error message will be generated. You must upgrade FD to use it.
1094 kes Make database name and user configurable
1095 --with-db-name=xxx --with-db-user=xxx
1096 kes Add back database type to message.c for debugging.
1098 kes Implement dir_sql() which issues an SQL query.
1099 kes Modify bat medialist to use dir_sql() and do some minor C++
1100 formatting as well as eliminating a number of pointers, simplifing
1103 kes Fix some of the mtx-changer grep commands for tape label readers.
1104 kes Convert a number of bsendmsg into the appropriate send/warning/error
1105 message class calls.
1106 kes Suppress the using database message in the .sql command.
1107 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1109 kes Add context menu for floating a window.
1110 kes Some minor cleanup and name changes in qt-console
1111 kes Add doing mt setblk 0 in Win32 mtx-changer.
1112 kes Apply Martin's bug fix to move definition of ENODATA for
1114 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1115 sqlite2 and sqlite3.
1117 kes More pruning cleanup.
1118 kes Turn on wait_for_drive by default in mtx-changer.
1119 kes Turn on Batch insert code by default as it now passes regression.
1120 kes Add ./configure --enable-bat to enable building of Bat.
1121 No install yet though.
1123 kes Implement a new .sql command for bat.
1124 kes Implement code to turn off pruning in obtaining the next volume.
1125 Pruning is turned off for the status dir command, but turned on
1126 for SD requests and for the list nextvolume command.
1128 kes Correct Qmsg() that was not updated correctly when committing a
1129 previous change (probably the recent TLS patch).
1131 kes Write new subroutine is_volume_purged() that explicitly checks
1132 if the Volume is purged, and if so marks it as such. This should
1133 resolve problems reported about needing to mount twice to recycle
1135 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1136 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1137 amount of duplicated code.
1138 kes Do volume pruning only for the Media Type desired (reduces pruning time
1139 if multiple Media Types are in the same pool).
1140 kes Implement more detailed info in the Job report for the Bacula version
1142 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1144 ebl Add bbatch tool to bench database and insert mode.
1145 Fix sql quote stuff in batch mode
1146 Fix sql stuff for mysql
1148 kes Correct problems with am/pm scheduling. Fixes bug #808.
1149 kes Implement new prunning code that prunes up to 1000 jobs at
1150 the same time. The same technique can be applied to a number
1151 of other prune/purge subroutines.
1152 kes Add an insanity check when starting a new tape job to ensure
1153 that the tape position has not been changed. If so fail the
1155 kes Fix Win32 build for dlls to add the folllowing:
1156 src/lib/bsock.c -- new file with new entry points
1157 src/lib/dlist.c -- new entry points
1158 src/cats/sql_create.c -- new entry point
1159 src/cats/sql_cmds.c -- new DATA item exported
1161 ebl batch mode cleanup bscan-test is ok now.
1162 kes Implement SD code to check length of disk volume before appending.
1164 kes Correct return status on db_batch... routines.
1165 kes Add call to db_write_batch_file_records() to migration code.
1166 ebl Fix AfterJob timing
1167 kes Move the checking of the database in initializion of the Director
1168 to after we drop privileges. This avoids the need for both root
1169 and bacula access to the DB.
1170 kes Correct a misplaced variable definition in src/filed/backup.c
1171 kes Correct how the new batch insert db_create_attributes_record()
1172 uses the arguments. Caused a seg fault in bscan.
1173 kes Implement lock() and unlock() methods in DEVICE class.
1174 Implement block() and set_block(xx) methods in DEVICE class.
1175 kes Modify bnet_connect() so that it uses time() to check for the
1176 wait time expiring (on some OSes, some system calls may not
1177 return immediately).
1178 kes Modify Verify to obtain the previous JobId when it is actually
1179 running rather than at schedule time (as it was in 1.38.x).
1180 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1182 kes When checking pid in pid file, continue running if the pid is
1183 the same as ours. This occurs on IRIX after a system crash.
1186 kes Extend new GUI API.
1187 kes Make the ua structure a class, and implement send_msg(),
1188 error_msg(), warning_msg(), and info_msg().
1190 kes Apply fix from for building wx-console on the Mac from
1192 kes Implement new select mechanism for GUI programs.
1193 kes Reorganize initialization of stackedWidgets in bat.
1195 kes Add updated nagios plugin supplied by Christian Masopust.
1197 kes More bat implementation.
1198 kes File migrate bug with Pool Occupancy using mediaid instead
1199 of jobids. Fixes bug #795.
1200 kes Fix orphaned buffers in filed backup and verify due to
1201 crypto buffers not freed during errors. Fixes bug #789.
1202 kes Extend new GUI api code to tree commands.
1203 kes Ensure that tree and dot commands check console ACLs.
1204 kes Permit marking directory with trailing slash.
1205 kes Allow 20 console connections (instead of only 10).
1207 kes Add smartctl call to bacula-sd.conf as an example of getting
1210 kes Modify jobq.c to let simultaneous restore jobs run. This may
1211 cause them to fail if they cannot get a drive.
1212 kes Add Client Connect Wait to Storage daemon to permit users to
1213 modify the time the SD waits for a FD connection.
1215 kes Correct virtual changer check which was backwards. This caused
1216 volumes to be unloaded into slots already occupied.
1218 kes Apply Command ACL filter to JobId list in restore command.
1219 kes Correct typeo in var.c patch.
1221 kes Don't let Bacula prune File or Job records for the current Job.
1222 kes Fix variable substitution pad + inc bug reported (with patch)
1225 kes Correct SQLite log table index as reported by Luca Berra.
1227 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1229 kes Begin implementing new comm signals for API.
1230 kes Fix a few places in lib/message.c where the open fd may
1232 kes Continue implementing lib/bsock.c (real class). Make jcr,
1233 who, host, and port private. There are new methods to access
1234 them for non-class use. This required touching a number of files.
1236 kes Add LANG=C to autoconf/randpass so it works with languages other
1237 than English. Fixes bug #788.
1239 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1241 You will not be able to generate Include/Exclude list any more.
1242 It will be fixed soon.
1243 If you want to use this, you can apply
1244 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1246 kes Restore of sockets created false error messages because Bacula
1247 no longer restores sockets, but the code was still trying to
1248 set the attributes on a non-existent file. Reported by a user.
1249 ebl finish RecyclePool feature
1250 Media will takes Pool.RecyclePool
1251 when moving from Scratch to a Pool or when user will do
1252 update volume=xxx frompool
1253 To use it, add RecyclePool = aPool to your Pool resource
1256 RecyclePool = Scratch
1260 kes Expand new BSOCK class adding signal() and new BNET signals.
1261 kes Begin enhancing the dot commands adding a new API function
1262 that returns more information and will make it easier
1263 to interface to the Director from a program.
1265 kes Make DEVICE fd private. Its new name is m_fd, and can be
1266 obtained with dev->fd() outside the class. This is the
1267 first of many DEVICE members to be made private.
1268 kes Implement Michael Renner's idea on having a virtual disk
1269 changer. I made some minor modifications (e.g. I did not
1270 implement the Virtual Changer directive, but simply set
1271 the Changer Command to an empty string.
1273 kes Implement a BSOCK send() method that writes the whole record
1274 in a single write() request rather than in two.
1275 ebl add update volume=xxx recyclepool=yyyy
1276 volume takes recyclepool from pool when using update volume=xxx from pool
1278 kes Fix encryption deblocking bug, which caused some restored files
1279 to be truncated. This fixes bug #763.
1280 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1281 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1283 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1284 ebl Use btime_t instead of uint64_t in media patch.
1286 kes Optimize the use of the database a bit in the Status dir command.
1287 Only open it when needed, ensure that if any previous database
1288 was opened, it is closed.
1290 kes Correct VolCatBytes bug from media patch.
1291 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1292 in the case of orphaned records.
1293 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1294 and File records in 300K chunks to be more efficient. This
1295 idea came from Juan Luis Frances (if I remember right).
1296 kes Apply Eric's scratch patch that moves a purged Volume to
1297 the RecyclePool. Question: how is RecyclePool set? what
1298 happens to the ScratchPool?
1299 kes Apply Eric's media patch that collects read/write media
1300 times as well as byte counts. This patch requires a
1301 simultaneous upgrade of the DIR and SD. Note, there
1302 should be some way to turn off timing. I'm not sure
1303 times are in Bacula units.
1304 kes Apply Eric's batch-insert patch.
1306 kes Update projects list.
1308 kes Implement Include/Exclude file lists in FD as dlists using
1309 the new dlistString class. This permits efficiently having
1310 large include/exclude lists and completes project Item 25.
1311 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1312 console is authorized to cancel the job. This fixes bug
1314 kes Modify SD so that the VolCatJobs medium record is updated
1315 at the beginning of a Job rather than the end. This
1316 fixes bug #775 where exceeding MaxVolJobs caused jobs
1318 kes Added a mutex around getting and setting Volume information
1319 so that multiple simultaneous jobs will single thread.
1321 Switch to using Subversion
1322 kes Remove src/pygtk-console/ from configure
1324 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1325 plus the entrypoints.
1326 kes Apply patch supplied that corrects debug print
1327 in canceling jobs for max run time. Supplied as
1328 part of bug #621, which was previously fixed.
1330 kes Test on job_canceled() and sd_msg_thread_done inside
1331 loop starting the message thread to avoid a race condition.
1333 kes Remove rl_catch_signal from console.c as it conflicted
1334 with the header definition. Fixes bug #765.
1335 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1337 kes Clarify some stored/acquire messages to indicate if the
1338 problem is with read or append.
1340 kes Fix memory leak with storage ids in cats/sql_get.c
1341 kes Terminate watchdog earlier to avoid reference to released
1342 memory -- reported by Jason Austin.
1343 kes Move closing the database from jobq.c to the director daemon
1344 termination routine. This fixes memory leaks for shadow jobs
1345 (i.e. migration jobs).
1346 kes Free up the unique jobid chain items in migrate.c. This fixes
1347 a memory leak problem.
1348 kes Convert some ugly looking for statements to use foreach_alist
1349 in findlib/find.c. This will facilitate converting the structures
1350 to use dlist (for large include/exclude lists).
1351 kes Fix a bug in the btree.c and btree.h routines, then rename them
1352 rblist and add them to be built in src/lib. Include some new
1353 methods written by Rudolf Cejka that make the code more readable
1354 (hides some of the ugly casting).
1355 kes Add set_next() and set_prev() methods which make the code much more
1356 readable. Also add a new dlistString class that facilitates storing
1357 strings in dlists. To be used in the large include/exclude lists.
1358 kes Make some trivial modifications to lib/tree.h that use rblist
1359 rather than dlist for storing the tree links. This was suggested
1360 by Rudolf Cejka. The result of this is that the restore tree now
1361 uses red-black binary trees rather than simple linked lists. This
1362 should give rather dramatic speed improvements for directories
1363 contining large numbers of directories/files (more than 10000).
1365 kes Fix maxruntime bug #621.
1367 ebl Implement the include JobID in spool file name project.
1368 kes Reorder projects file in order determined by Jan 2007 vote.
1369 kes Implement item #12 on project list -- quick release of FD by
1371 kes Fix open of SQLite3 db where user does not have write permission
1372 so that DIR does not crash. Fixes bug #761.
1374 kes Add back missing @ in Win32 Makefile.
1375 kes Change 'Device not configured to autolabel' from INFO
1377 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1378 which should restart an indefinite # of times.
1379 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1380 other DIR specifications.
1382 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1383 Fix path quoting in SQLite scripts.
1384 Fix problems with SHGetFolderPath.
1386 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1388 kes Fix Job restart on error bug that promotes an Inc to a Full
1389 backup. This should fix bug #755.
1390 kes Add qt-console and first cut of code.
1394 kes Fix Bacula->Documentation link on Win32 to point to index.html
1395 instead of bacula.html. Fixed bug #750.
1396 kes Return JobId in db_get_job_record() when JobId==0. This should
1398 kes Do not release source pointers when restarting a failed job.
1400 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1401 This *should* fix bug #747.
1402 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1405 kes Modify USTORE constructor to set an empty store_source string,
1406 and don't copy the store_source string in a cancel. Hopefully
1407 this will fix Arno's seg fault, bug #744.
1408 kes Add back code to disable conio in configure. Fixes bug #743.
1409 kes Correct the Options scanner in the FD to correctly handle
1410 SHA1 option, which was eating the next option. Reported by
1412 kes Add code to indicate when the SD is spooling, spool wait, and
1413 despooling as requested by Alan Brown.
1415 Version 2.0.0 released: 4 January 2007