1 Technical notes on version 2.3
5 kes Turn off some code when batch insert not enabled.
6 kes Edit FD name in connect error messages.
7 kes Rework the reservation system to take into account that the Director
8 might give us a Volume that is different from the current one being
9 used, and to ensure that we don't exceed Maximum Volume Jobs.
10 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
11 fatal error with multiple jobs running'
12 kes Add more debug code in reservation system.
13 kes Implement maxvol-test to check bug #947.
15 kes Add code to handle tray monitor separated from Win32 FD.
16 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
18 kes Add missed return in fixing verify bug -- trunk only.
19 ebl Fix a command parser issue causing a director segfault.
20 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
22 kes Increase the max block size to 4MB fixes bug #957.
23 kes ERABT if user sets min block size > max block size. Fixes bug #956.
24 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
25 is not properly mounted (recognized) during a poll.
26 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
27 Job that has differences reports Verify OK.
28 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
30 ebl Add an option to operate on all pools with update vol parameters.
31 This complete the project 20. Patch from Nigel Stepp.
32 ebl Add history support to bconsole when using readline.
33 Using Ctrl-D to exit doesn't update .bconsole_history
34 kes Modify new volume algorithm to use max MediaId for generating next
35 volume number rather than the count of Volumes. This should essentially
36 eliminate the failure rate if some volumes were deleted. Bug #921.
37 kes Begin implemention of Optimize Job Scheduling.
38 kes Implement restore callback that Dirk and I agreed on for bat
39 restore. This fixes bug #928. Restore of backup of zero files fails.
40 kes Fix SQL Catalog logging which broke with new db_escape_string
43 kes Fix bacula_cats.def for new db_escape_string().
44 kes Increase size of name string when FD making connection to SD.
45 May fix bug #953. FD->SD connection failure.
47 kes Add code to help Dan debug 2drive-incremental-2disk test.
48 kes Add code to try to fix bug #908.
49 kes Add waits to multiple exit detection code to try to force pid
50 file to always be deleted.
51 kes Restore good dev.tar.gz to rescue set appropriate binary property.
53 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
54 trying to switch drives by checking for blocking before unblocking.
56 kes Cancel storage daemon in all cases where FD reports error. This
57 should fix virtually all cases of bug #920.
58 kes Fix db_escape_string() for MySQL which did not compile.
60 kes Fix error message that was clobbered when Dir tells SD it does not
61 have write permission on Volume. This should fix a minor point
62 in bug #942, but not the main problem.
63 kes Add code to cancel job in SD if FD connection fails. This should
65 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
66 dvl Pass jcr and db into db_escape_string() to enable better escaping
68 kes Fix migration code to get correct Volume name with multiple volumes
69 by skipping |. Fixes bug #936.
70 kes Implement patch supplied by Landon to fix bug #944 where using
71 TLS with bconsole uses 99+% of the CPU.
72 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
74 kes Move patches into patches directory.
76 ebl Fix bug #946 about "bacula-dir -t" which doesn't works
79 ebl Using "m" in bconsole will show messages like before,
81 kes Fix bug #935, and probably also bug #903 where files were not
82 restored. MediaId was not properly set in JobMedia record after
85 kes Suppress chown and chmod error messages if the FD is not running
88 kes Apply Martin Simmons' patch that should turn off the new API usage
89 when batch insert is turned off allowing building on older
91 kes Add ./configure search in qwt-qt4 for qwt package
93 kes Bacula is now free of 3rd party GPL copyrighted code!
95 kes Add guid_to_name.c/h which replace idcache.
96 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
98 ebl Detect if new PosgreSQL batch insert API is present.
99 kes Correct incorrect mempool call causing Director crash. Occurs on
100 systems without va_copy().
101 sb Update spec files for 2.2.1 release
103 kes Fix memory pool call in ua_output.c. bug #934.
104 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
105 Add test program to fnmatch.c
107 kes Integrate patch to README.vc8 from
108 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
109 edit it to get it into Unix patch format.
110 kes Implement mkpath.c to replace old FSF makepath.c
112 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
114 Release Version 2.2.1
116 kes Update POTFILES.in
117 kes Cleanup a few underquoted AC_DEFUNs in configure
118 kes Apply patch from Martin Simmons that adds a test for va_copy to
121 kes Fix bug #921 by increasing the number of tries to create a new volume
123 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
124 can be called multiple times. Implement a version for machines
125 without va_copy() that gets a big buffer.
127 kes Integrate more portable zone offset code into bsmtp.c
128 Submitted by Attila Fülöp.
130 kes Fix bad SD->FD return status reported by
131 (James Harper) <james.harper@bendigoit.com.au>
132 ebl Fix a bug in read_close_session which return random status
133 thanks to James Harper
135 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
136 and directory names during restore of single file/directories.
137 kes Add sanity checks to .sql command when string is empty. Hopefully
138 that will resolve Dirks Director crash.
140 kes Apply patch submitted by Martin Simmons that corrects a seg fault
141 in the bsmtp chat subroutine when debug is >= 10.
143 kes Fix Director crash when running bat SQL queries.
144 kes Add David's notes on Item 8: Copy pools.
146 kes Rework projects file to be current and ready for a vote.
147 kes Enhance lex scanner error message.
149 kes Tweak LICENSE file to mention BSD code.
150 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
151 if specified on the ./configure.
152 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
153 This class is intended to allow us to open a second bsock to the
154 Director while in the restore subdialog.
156 kes Fix configure to create bat Makefile before creating dependencies.
157 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
158 kes Add a tooltip to the tray monitor.
159 dvl Set the Director's PID file before dropping privs. This fixes
162 kes Update AUTHORs file
163 kes Increase the default max concurrent jobs to 20 in FD and SD to
164 correspond with the default .conf files.
165 kes Rewrite the Win32 service routines. This eliminates the 3 copies
166 some different, of the same file created by RN when porting the
168 kes Rearrange some of the Win32 directories and the placement of the files
170 kes Set DEVELOPER flag in version.h
172 ========================================================================
173 Release Version 2.2.0
175 kes Apply a second doc patch from Marc.
176 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
177 improves the tips section that discusses how to setup multiple
180 kes Update bat README file.
181 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
182 corrects a typo in the Recycle status check in db_find_next_volume().
183 This will probably fix a number of annoying problems with multiple
185 kes Modify most of dird/msgchan.c to use bsock class calls rather than
186 bnet calls -- no functionality change.
188 kes Modify the Verify output to specify if files are missing on
189 the Volume(s) or disk. Fixes confusion in bug #916.
190 kes When more than one Volume is read in a migration job, the last
191 Volume bytes reported are from the last read volume rather than
192 the last written volume. Fixed. This fixes bug #910.
193 kes Fix display of Recycle flag after update volume=foo recycle=yes.
194 It previously printed New Recyle flag is: no. This fixes bug
197 kes Correct seg fault when switching tape drives during restore.
198 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
199 be used until after 2.2.0 release.
201 kes Remove fnmatch() in SD that permitted wild card specifications.
204 kes Fix %g in filename returned by SQL for browse tree reported by
206 kes Fix configure so that it puts config.out in the cwd rather than
208 kes Attempt to fix the locking problem reported by Eric in bug #906.
209 kes Make berrno class to leave errno unchanged after constructor call.
210 kes Make bnet_server use the heap rather than the stack to allocate
211 its socket fd pointers to avoid a crash at termination. Problem
212 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
214 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
215 and putting it in depkgs-qt along with Qt4.3.
217 kes Rework code in acquire.c that switches drives for reading when
218 the Media Type does not match. This should fix bug #906
220 ebl Fix a director segfault during job setup #907
221 kes Correct seg fault in postgresql when first operation returns no
222 rows. Fixes Dirks File browser problem seg fault with bat.
224 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
225 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
228 kes Implement PopUp YES/NO dialog for bat.
230 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
232 kes Correct RunScript to terminate job in FD on failure.
233 kes Change abort_on_error and AbortJobOnError to fail_on_error
234 and FailJobOnError in RunScripts.
235 kes Minor tweaks of code formating in RunScripts, principally to
236 avoid depassing 80 columns.
238 kes Eliminate one #ifdef Win32 in bsmtp
239 kes Implement grow tool to grow a file for testing very large databases.
240 kes Add big-vol-test to test Bacula seeking with > 5GB.
243 kes Modify find_next_volume() to return all values in Media record.
244 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
248 kes Update Release notes
250 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
251 Warning, in previous beta version, all media get from scratch keep their
254 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
255 This should fix bug #842. Made a note to look at removing the temp
256 files at the end of the install.
257 kes Add ability to mount and unmount a file device providing it is
258 marked as being removable and has the appropriate mount and unmount
259 commands defined in the Device resource. This fixes bug #830.
260 kes When applying a storage override, release all previous storage
261 definitions rather than just prepending the new storage.
262 This should prevent a good deal of confusion.
264 kes Implement ./configure search for qwt libraries.
266 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
267 Win32 FD. This should fix bug #893.
268 kes Remove an unnecessary beep in Win32 init code.
269 kes Update copyright dates in Win32 executable about boxes.
270 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
271 code with a BSD getopt.c and getopt.h.
272 kes Remove sched.h from the Win32 compat directory -- not used.
273 kes Remove the Exit menu item from the Win32 tray monitor. If you really
274 need to shut it down, do it through the services panel or the command
276 kes Remove some inappropriate Bacula FSFE copyrights.
277 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
278 kes Fix regress config non-portable test as pointed out by
279 Florian Heigl <florian.heigl@gmail.com>
280 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
281 as pointed out by Florian Heigl <florian.heigl@gmail.com>
283 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
284 Reported by Frank Sweetser.
288 kes Fix client-only build.
289 kes Integrate client-only fixes for bsys (initgroups) and conio from
290 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
291 kes Make arguments to get_scratch_volume() in same order as other
293 kes Rework the prune_volumes() subroutine so that after purging and
294 no volume found in desired pool, it will check for a scratch
295 volume. This prevents recycling the whole scratch pool.
296 kes Add code to status storage to print boffset_t (largefile support).
298 kes Move qwt (Graphics libarary for Qt4) to depkgs.
299 kes You now need a --with-qwt=<dir> to be able to build bat.
300 kes Update src/win32/cats/bacula_cats.def to include the new
301 db_get_query_dbids() call on Win32.
303 kes Correct a problem when selecting a scratch volume and moving
304 it to another pool that lost some columns.
305 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
306 kes Enhance Autochanger error messages to include Volume and device name.
307 kes Rework prune_volumes() code to take account of InChanger flag,
308 and to handle recycling volumes going to the Scratch pool and
309 current pool because the RecyclePool directive.
310 kes Implement a better and more efficient db_get_query_dbids() to
311 handle creating and passing back a list of DBIds.
315 kes Start work on new more efficient DBId subroutine. First use
316 will be for recycling volume to Scratch inchanger.
317 kes Increase number of JobIds in pruning from 1000 to 10000.
318 This to be replaced by above routine.
319 kes Begin implementation of building Qt4 on Win32.
320 kes Correct typo in fix I added for bad TLS shutdown.
321 kes Pull 2.0.3 patches into patches directory.
322 kes Update Release notes. Include qt-console in line count.
323 kes Update Projects file.
325 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
326 bug in migration code where a job that spanned two volumes
329 kes Implement new BST_DESPOOLING blocked state. Change from locking
330 during despooling in SD to blocking. This means that other threads
331 can work with the device structure, in particular the reservations
332 system while despooling.
334 kes Fix return in reservation message queue that missed clearing
335 the jcr lock (implemented 26Jun07 below).
336 kes Rename a number of dev methods to make locking function names
338 kes Document locking in lock.c. Move lock structures to new file
341 kes Move reservations message lock to lock jcr only this
343 kes Move main SD locking code into lock.c (new file).
344 kes Update Win32 build to include lock.c
348 kes Dirk committed the qwt library code for drawing graphs in bat.
349 kes Tweak install of qwt so that it is integrated with ./configure.
351 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
352 out by Eric (my typo).
353 ebl Fix configure.in to get batch mode enable
354 kes Return correct string from authenticate.cpp in bat when connecting
356 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
357 spurious line drops when using TLS.
358 kes Do not file reparse points when restoring a file that already
361 kes Implement Windows reparse points -- similar to directories, but
362 we do not descend into it. This is a first cut. They seem to
363 be backed up, but restore is not yet tested.
364 kes Remove restore_blocking in tls code when shutting a socket to leave
365 it in blocking mode. Hopefully this will fix the encryption bug
366 reported by Frank Sweetser.
367 kes When opening a file for backup, tell the OS that we are going to
368 read it sequentially -- optimization.
369 kes Change variable names in authenticate_director() to not conflict
370 with member names in bat. Caused great confusion with compiler,
373 kes Queue openssl error messages in case of comm problem.
374 kes Do shutdown() call if socket terminated.
375 kes Remove some duplicated code in tls.c
376 kes Move more of the bsock member variables into private and access
378 kes Add Frank Sweetser's tls-test to the regression suite.
380 kes Add Swedish sv.po file
382 kes Don't print clock skew message in FD if less than 3 seconds diff.
383 kes Add a bit of VSS info to status client.
384 kes Implement a first cut of Vista VSS, using Win2003 code.
388 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
389 loaded tape but uses first drive).
390 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
391 This was indeed a Win32 issue.
393 kes Simplify search of autochanger for in-use Volume.
394 kes Fix exit condition of check for in-use volume. kes Remove
395 inappropriate my_postgresql_free_result() in db_close()
397 kes Fix bad return in FD when encryption signature not found.
398 Probably caused a crash.
399 kes Inhibit missing encryption signature error messages for
400 file types where no signature computed.
401 kes Correct inverted check on autochanger in reservation system.
402 kes Tweak debug code in autochanger reservation.
404 kes Add some additional locking in the cats directory in subroutines
405 that modify packet variables called from batch insert.
406 kes Rework how dcrs are allocated. new_dcr() can now be called
407 with an existing pointer, and it will simply clean it up.
408 This allows the reservation system to test various different
409 devices, and will permit easy device changes.
410 kes A bunch of changes all over to handle new new_dcr() calling
412 kes Work more on the Volume management in the SD. Remember Volumes
413 for tape drives and for autochangers (even virtual disk changers).
414 kes When looking at the Volume list to reserve a drive, handle
415 autochanger names correctly by interating through the changer
416 devices. Also call the Director to see if a Volume is suitable
418 kes Fix some bugs in bscan. Make sure all media records are written.
419 Make sure that valid JobMedia records are written for disk files.
420 Previously they were completely wrong.
421 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
422 that the URLs don't change and so that the developers will all
423 work off the same copy. Rebuild from scrach.
424 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
428 kes Fix seg fault in FD from incorrect digest size.
429 kes Fix argument to non-OpenSSL crypto.c subroutine.
433 kes Remove a few malloc()s from the encryption code.
434 kes Use the class calls to bsock in filed/backup.c and restore.c in
435 place of the old bnet_xxx code.
436 kes Implement code that does an on the fly calculation of the
437 signing digest during restore of encrypted files. It makes
438 a best guess at the algorithm, and if it is not correct, will
439 then revert to the old code which reads the file after it is
441 kes Implement at least one missing crypto stream in stream_to_ascii()
442 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
443 #877 where a reload with bad syntax causes Dir to exit.
445 Cut: 2.1.14 beta (not released)
447 kes Do not free a volume on a tape drive until another volume is
448 mounted and read, or the autochanger unloads the volume.
449 This should help the SD re-use volumes that are already mounted,
450 and should fix bug #886.
451 kes Apply patch from user brettedgar that allows gnome2-console include
452 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
453 kes Apply patch from Lucien Weller that fixes day of week calculation
454 because of DST flag problem. Fixes bug #887.
456 kes Move find_next_appendable_volume() to after acquiring a valid device
457 in reserve.c. This fixes bug #864 -- confirmed by reporter.
459 kes Unable to reproduce bug 872. However added additional testing for
461 kes Bug #874 resolved by documenting SQLite limitations.
462 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
463 kes Bug #881 resolved by removing typo in mtx-changer script.
464 kes Made Frank Sweetser's wiki the official Bacula wiki with his
465 approval. Added a link to the wiki on the web page, and implemented
466 a backup from http://paramount.ind.wpi.edu
468 kes Fix update allfrompool to pass pool name.
470 kes Convert to pure GPL v2 license.
471 kes Fix sscanf problems reported by Peter Buschman that caused
472 a bus error on Solaris.
473 kes Rework (simplify) the select prompt in bat.
474 kes Move get_jobid_from_tid() into lib and create a
476 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
477 should definitely fix the problem of lost error messages in the
479 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
480 kes Eliminate tcpd.h from the project. Enclose the #include from the
481 library with extern C ...
482 kes Add print of signal name when a signal is trapped.
486 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
488 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
489 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
490 makes SQLit3 run 30 times faster, though a bit less safe.
491 kes Implement --with-batch-insert in configure and detection of thread
492 safe libraries. It is on by default, but turned off if no thread
493 safe library (e.g. SQLite 2) is available.
495 kes Fix Bacula PostgreSQL buffer overruns.
496 kes Do better checking for NULL results returned from PostgreSQL;
497 implement retry for failed queries; clear results buffer after
498 failed query. Hopefully this will correct the PostgreSQL failures.
500 kes Implement algorithm to handle only one appendable volume with
501 Prefer Mounted Volumes = no.
502 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
503 returned from a query.
504 kes Make volume lock recursive.
505 kes Implement an additional volume reservation algorithm that
506 starts by considering all reserved volumes then uses the
507 old brute force algorithm of searching the resources to
508 find a suitable device.
509 kes Add new reservations debug code and refine the old code.
510 kes Update the win32/dll/bacula.defs file.
512 kes Tweak reservations algorithm to permit a few more cases, i.e.
513 volume reserved, but on different drive, ...
514 kes Enhance SD status to include Pool and Media Type for drive in a
515 more readable format (a bit longer).
516 kes Fix PostgreSQL double free.
518 kes Minor refactoring of restore decryption code.
519 kes Add code to smartall.c to detect double free of a buffer.
521 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
522 so that bsmtp will create a correct email address (mailbox only).
523 kes Modify 'memory' command so that the buffers are listed as 'In use'
524 to avoid confusion with Orphaned buffers.
525 kes I reworked the OpenSSL include/lib flags to be handled in
526 the standard Bacula way, which should fix bug #863 concerning
527 non-standard OpenSSL libraries.
529 kes Implement Help Browser window for bat.
530 kes Fix reload bug that reset StorageId to zero.
532 kes Fix TLS #ifdefing when TLS turned off.
533 kes Ensure that when labelling a tape with Slot=0 that InChanger
535 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
537 kes Add StartTime to final uar_sel_jobid_temp query so that we can
538 add DISTINCT (required by PostgreSQL).
539 kes Implement BSOCK authenticate_director() method. Eventually will
540 authenicate all daemons.
541 kes Move several more functions into the BSOCK class.
543 kes Add code to tell the OS that we no longer need a cached
544 file that we were reading. In findlib/bfile.c. Also,
545 only cache files that we are reading. Thanks to
546 Tobias Oetiker <tobi@oetiker.ch> for the idea.
547 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
548 kes Implement script to automatically generate cats and dll .def
550 kes Update README.mingw32 to include new .def file generation.
551 kes Correct typo in UTF-8 error message as reported by:
552 jhernandez <julianhernandez@gmail.com>
553 kes Add additional sm_check() code on debug level 1.
554 kes Set default debug level to 1.
555 kes Trap SIGABRT in attempt to get traceback.
557 kes Reduce bat connect timeout from 30 to 15 seconds.
558 kes More restructuring and implementing BSOCK class in place of
560 kes Remove a few unnecessary malloc() tests in crypto code.
561 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
562 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
563 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
565 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
567 kes Fix Verify InitCatalog. The attributes were not pointing to the
568 correct saved location.
569 kes Implement message callback so that GUI is sure to get all
570 daemon messages. Currently displayed in a dialog in bat.
571 kes Ignore SIGUSR2 (Bacula timer) in bat.
572 kes Apply regress patch from bug #859 to allow regress to work
573 with Solaris compiler.
575 kes Begin adding TLS support to bat.
576 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
577 clean up lex.c and make it more readable.
579 kes Move more bnet functions into the BSOCK class.
580 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
581 kes Complete change of berrno strerror() method to bstrerror()
585 kes Cleanup incorrect email addresses in bsmtp.
586 kes Make bat display initial messages rather than discard them.
588 kes First cut of adding .mod to the run command.
589 kes Implement auto display of messages in bat.
590 kes Enhanced preferences to allow all Bacula output to be
593 kes Try to make bsmtp date routines more generic.
594 kes Fixed bug #856 autochanger documentation.
595 kes Rework bsmtp date editing for Win32. This fixes bug #854.
596 kes Add new cats entry point so Win32 builds.
598 kes Attempt to fix bsmtp date editing on OSes without %z editing.
600 kes Do better checking for the MySQL 64 bit libraries looking for both
601 .a and .so libraries.
602 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
603 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
604 kes Require the thread safe version of MySQL during configure. Thanks
605 to Andre Noll for pointing this out.
606 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
607 continuing in migration code.
608 kes Apply implementation of tray-monitor font derived from gnome-console
609 submitted by Andreas Piesk <a.piesk@gmx.net>
611 kes Eliminate important memory loss in SQLite
612 kes Fixed the batch insert MySQL thread specific data that was not
613 being freed. See cats/mysql.c:db_thread_cleanup().
614 kes Fix restore before command.
615 kes Convert old hdr.name to name() in a few places.
616 kes Implement update jobid command.
617 kes Return all time_t dates in db_get_job_record()
618 kes Stop watchdog in SD earlier.
619 kes Put Pool just after Storage in please mount message.
620 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
623 kes Update the po files.
624 kes Fix Verify InitCatalog by making it cache attributes.
626 kes Change name bacula-bat to bat for man 1 page to correspond to
628 kes Check for client and store NULL pointers in status command. This
630 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
631 kes Fix sign extended editing of %p.
632 kes Clean out a little old #ifdefing in cats/mysql.c
634 kes If time diff between DIR and FD is more than 600 seconds convert
635 INFO message to WARNING.
636 kes Implement heap size display in status for all daemons.
637 kes Attempt to fix MySQL db open memory loss (not successfull).
638 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
639 kes Eliminate memory loss in MySQL (possibly other SQLs) during
640 Query. This looks like a MySQL but but by doing extra releases,
641 the memory goes away. This should fix bug #847.
643 kes When backup fails, cancel SD before waiting for sd termination.
644 kes If SD is waiting for FD to connect during cancel, wake up the
646 kes Fix fsf code so that errno is correctly reported.
647 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
649 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
650 so that Bacula doesn't later stumble into a seg fault.
651 kes Use the term Restore Client in the restore Job report.
652 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
653 the original job's FileSetId.
654 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
655 spooling in migration jobs. Not yet tested.
656 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
657 reading conf file from a pipe. However, do it with open_bpipe()
658 rather than popen. Not yet tested.
660 kes Fix an ugly bug where the VolCatBytes were getting updated
662 kes Implement bconsole memory command that prints current memory
663 usage, plus smartalloc dump.
664 kes Clarify some error messages in backup, admin, and migrate.
665 kes Shrink label dialog to smaller size.
666 kes Invert Cancel OK buttons on restore to be OK Cancel.
667 kes More strerror() to bstrerror() conversions.
669 kes Start implementing bstrerror() in place of strerror().
670 kes Stripping path -- seems to work.
672 kes Prevent door and port files from being restored (mostly
674 kes Free an unreleased buffer in compat code.
675 kes Change console Job name from *Console* to -Console- to eliminate
676 Win32 filename problems. Put Win32 path separator when creating
677 Console file. This fixes bug #846.
678 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
680 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
682 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
683 to force Win32 error message.
685 kes First cut strip path. The data should be passed to the FD,
686 but nothing is done with it yet.
687 kes Enhance the digest and signature routines in the crypto
688 library to accept a JCR and to use it to print error messages
689 so that they will go in the Job report rather than the daemon's
691 kes Simplify some of the verify signature code.
692 kes Simplify a few of the alternative returns in the signature
695 ebl Use only POSIX regex instead of GNU regex in breg.c for
696 File relocation. It fix broken freebsd compilation.
697 kes Convert all other Dir files to use new ua class message
699 kes Tentative fix for missing digest signature in bug 807.
700 kes Correct handle problem in new win32_ftruncate routine.
701 kes Convert ua_purge.c and ua_update.c to use new ua class
702 message routines for bat.
704 kes Correct incorrect installation of LICENSE in Win32 installer.
705 kes Display LICENSE at the beginning of the Win32 install.
706 kes Attempt to correct the need for the png files to be installed
708 kes Reapply my bat.conf install script in qt-console. I think I
709 editted bat.pro instead of bat.pro.in and it was lost.
710 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
711 the /var/lock/subsys for subsysdir. Also corrects typos in the
714 kes First cut update job.
715 kes Correct configure to include qmake of src/qt-console directory.
717 kes Make restore job yes/mod/no print in one command so GUI works.
718 kes First cut implementing backup and restore client.
719 kes Correct editing in Verify output that caused a seg fault.
721 kes Insure that bat.conf is not overwritten during installation.
722 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
723 while I was implementing migration in March 2006 !
725 ebl Cleanup file relocation, using char *RegexWhere instead of
726 char *where + bool where_use_regexp
727 kes Update some manpages and add bat manpage.
728 kes Make a first cut at converting bacula.spec.in for bwx-console
730 kes Apply patch from John Goerzen to add hostname as fourth argument
731 to make_catalog_backup script.
732 kes Fix typos I introduced into bsmtp.c
733 kes Make pm_strxxx() routines handle input of NULL pointer. This
734 is to protect from NULL pointers returned from SQL databases.
735 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
736 kes Add more debug to FIFO code -- fix fifo regression test.
738 kes Implement posix_fadvise in FD, and for reading spool files in SD.
739 kes Add thread timer to bnet_connect() to break from OS if wait time
742 kes Update Win32 build to include new files, new symbols, and
744 kes Implement socket level heartbeat (tcp_keepidle)
745 ebl Commit File relocation patch
746 kes Make bat have 'make install' target.
747 kes Warn during install if old gnome-console binary found.
748 kes Warn during install if old wx-console binary found.
749 kes Add -8 option to bsmtp command line to add content type utf-8.
750 Fixes bug #809. (Character coding problem in bsmtp).
751 kes If < is found in target (from, to, cc) then do not enclose the
752 target in < > in bsmtp. Fixes bug #772 (malformed address).
753 kes When printing certain items in dbcheck, stop after 300000.
754 Fixes bug #822. (dbcheck loops).
755 kes Incorrect status in Dir after waiting for mount with poll set.
758 kes Extend idea of Prefer Mounted Volumes to mean a volume about
760 kes Print waiting to reserve a device every 5 mins.
762 kes Don't call close_part in label.c if tape and relabel.
763 kes Don't free volume if busy in close() -- should help with
765 ebl Fix #824 RunScript bug (After script could be execute twice)
766 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
767 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
768 Add a regression script to test RunScript
770 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
773 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
774 deprecated. No additional bugs will be fixed, and they will be dropped
775 in a future release (probably 2.4.0).
776 kes Change name of wx-console to bwx-console to make it more Bacula
778 kes Change the name of gnome-console to bgnome-console to make it
781 kes Some time in March, a Feature Request with patch from Jorj Bauer
782 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
784 The ability for the director to validate a Client (FD) CN against
785 an arbitrary set of patterns rather than the hostname, with
786 A new 'TLS Allowed CN' set of directives which are implemented
787 in the Client resource. Then pattern matching is used in place
788 of hostname matching against the Certificate's CN. As an example, we
789 have certificates which (a) use a local CA, and (b) have a CN of the
791 kes Add new/changed entry points to Win32 build
792 kes Create unaccepted-projects for projects that are not accepted.
793 kes Simplify locking in the reservations system.
794 kes Add more debug code in reservations.
795 kes Make sure error condition on reserving a volume is handled correctly.
796 kes Correct handling of volume_in_use.
797 kes Correct handling of initializing a device.
798 kes Move handling of broadcasting releasing a device into release_device().
799 kes Correct attaching dcr to dev so that it is only done if device
800 is properly initiated.
802 kes Locking debug level tweaks in SD.
803 kes Tweak new Volume code.
805 kes Add exec external-command [wait-seconds] to bconsole. This
806 executes the external-command. Note! normally external-command
807 should be enclosed in double quotes.
808 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
809 it should normally be off in a production system.
811 kes Implement die command for SD so that we can force it to dump.
812 kes Implement SD lock debug code.
813 kes Implement new algorithm for keeping Volume list in SD. It
814 is now owned by the device.
816 kes Implement new code for freeing in use volumes that should
817 resolve if not all, some of the problems of multiple drive
818 tape conflicts described in bug 801.
820 kes Fix gui/bacula-web/images files in svn.
821 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
823 ebl Fix a bug in batch mode (in string escape)
824 kes Correct migration prune SQL typo that crept in in a
827 kes Move bnet_despool() into class in bsock.c
828 kes Modify job report to include director name and Build OS.
829 kes Move drop root privilege and check_catalog() before fork.
830 kes Add update database scripts (version 9 to 10) to updatedb directory.
832 ebl Check size and age of each file after its backup to see if
833 it has changed during backup, if 'checkfilechanges' is set.
834 The FD will do an extra check (stat(2)) after
835 each file backup. mtime, ctime and size are compared with
836 'before backup' information. If time or size mismatch, an
837 error message will be generated. You must upgrade FD to use it.
839 kes Make database name and user configurable
840 --with-db-name=xxx --with-db-user=xxx
841 kes Add back database type to message.c for debugging.
843 kes Implement dir_sql() which issues an SQL query.
844 kes Modify bat medialist to use dir_sql() and do some minor C++
845 formatting as well as eliminating a number of pointers, simplifing
848 kes Fix some of the mtx-changer grep commands for tape label readers.
849 kes Convert a number of bsendmsg into the appropriate send/warning/error
851 kes Suppress the using database message in the .sql command.
852 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
854 kes Add context menu for floating a window.
855 kes Some minor cleanup and name changes in qt-console
856 kes Add doing mt setblk 0 in Win32 mtx-changer.
857 kes Apply Martin's bug fix to move definition of ENODATA for
859 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
862 kes More pruning cleanup.
863 kes Turn on wait_for_drive by default in mtx-changer.
864 kes Turn on Batch insert code by default as it now passes regression.
865 kes Add ./configure --enable-bat to enable building of Bat.
866 No install yet though.
868 kes Implement a new .sql command for bat.
869 kes Implement code to turn off pruning in obtaining the next volume.
870 Pruning is turned off for the status dir command, but turned on
871 for SD requests and for the list nextvolume command.
873 kes Correct Qmsg() that was not updated correctly when committing a
874 previous change (probably the recent TLS patch).
876 kes Write new subroutine is_volume_purged() that explicitly checks
877 if the Volume is purged, and if so marks it as such. This should
878 resolve problems reported about needing to mount twice to recycle
880 kes Rewrite pruning algorithm to do more work in the SQL engine, and
881 to pass a list of JobIds to be deleted to SQL. Also, minimize the
882 amount of duplicated code.
883 kes Do volume pruning only for the Media Type desired (reduces pruning time
884 if multiple Media Types are in the same pool).
885 kes Implement more detailed info in the Job report for the Bacula version
887 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
889 ebl Add bbatch tool to bench database and insert mode.
890 Fix sql quote stuff in batch mode
891 Fix sql stuff for mysql
893 kes Correct problems with am/pm scheduling. Fixes bug #808.
894 kes Implement new prunning code that prunes up to 1000 jobs at
895 the same time. The same technique can be applied to a number
896 of other prune/purge subroutines.
897 kes Add an insanity check when starting a new tape job to ensure
898 that the tape position has not been changed. If so fail the
900 kes Fix Win32 build for dlls to add the folllowing:
901 src/lib/bsock.c -- new file with new entry points
902 src/lib/dlist.c -- new entry points
903 src/cats/sql_create.c -- new entry point
904 src/cats/sql_cmds.c -- new DATA item exported
906 ebl batch mode cleanup bscan-test is ok now.
907 kes Implement SD code to check length of disk volume before appending.
909 kes Correct return status on db_batch... routines.
910 kes Add call to db_write_batch_file_records() to migration code.
911 ebl Fix AfterJob timing
912 kes Move the checking of the database in initializion of the Director
913 to after we drop privileges. This avoids the need for both root
914 and bacula access to the DB.
915 kes Correct a misplaced variable definition in src/filed/backup.c
916 kes Correct how the new batch insert db_create_attributes_record()
917 uses the arguments. Caused a seg fault in bscan.
918 kes Implement lock() and unlock() methods in DEVICE class.
919 Implement block() and set_block(xx) methods in DEVICE class.
920 kes Modify bnet_connect() so that it uses time() to check for the
921 wait time expiring (on some OSes, some system calls may not
923 kes Modify Verify to obtain the previous JobId when it is actually
924 running rather than at schedule time (as it was in 1.38.x).
925 kes Fix src/job.c to handle MaxWaitTime correctly. This should
927 kes When checking pid in pid file, continue running if the pid is
928 the same as ours. This occurs on IRIX after a system crash.
931 kes Extend new GUI API.
932 kes Make the ua structure a class, and implement send_msg(),
933 error_msg(), warning_msg(), and info_msg().
935 kes Apply fix from for building wx-console on the Mac from
937 kes Implement new select mechanism for GUI programs.
938 kes Reorganize initialization of stackedWidgets in bat.
940 kes Add updated nagios plugin supplied by Christian Masopust.
942 kes More bat implementation.
943 kes File migrate bug with Pool Occupancy using mediaid instead
944 of jobids. Fixes bug #795.
945 kes Fix orphaned buffers in filed backup and verify due to
946 crypto buffers not freed during errors. Fixes bug #789.
947 kes Extend new GUI api code to tree commands.
948 kes Ensure that tree and dot commands check console ACLs.
949 kes Permit marking directory with trailing slash.
950 kes Allow 20 console connections (instead of only 10).
952 kes Add smartctl call to bacula-sd.conf as an example of getting
955 kes Modify jobq.c to let simultaneous restore jobs run. This may
956 cause them to fail if they cannot get a drive.
957 kes Add Client Connect Wait to Storage daemon to permit users to
958 modify the time the SD waits for a FD connection.
960 kes Correct virtual changer check which was backwards. This caused
961 volumes to be unloaded into slots already occupied.
963 kes Apply Command ACL filter to JobId list in restore command.
964 kes Correct typeo in var.c patch.
966 kes Don't let Bacula prune File or Job records for the current Job.
967 kes Fix variable substitution pad + inc bug reported (with patch)
970 kes Correct SQLite log table index as reported by Luca Berra.
972 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
974 kes Begin implementing new comm signals for API.
975 kes Fix a few places in lib/message.c where the open fd may
977 kes Continue implementing lib/bsock.c (real class). Make jcr,
978 who, host, and port private. There are new methods to access
979 them for non-class use. This required touching a number of files.
981 kes Add LANG=C to autoconf/randpass so it works with languages other
982 than English. Fixes bug #788.
984 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
986 You will not be able to generate Include/Exclude list any more.
987 It will be fixed soon.
988 If you want to use this, you can apply
989 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
991 kes Restore of sockets created false error messages because Bacula
992 no longer restores sockets, but the code was still trying to
993 set the attributes on a non-existent file. Reported by a user.
994 ebl finish RecyclePool feature
995 Media will takes Pool.RecyclePool
996 when moving from Scratch to a Pool or when user will do
997 update volume=xxx frompool
998 To use it, add RecyclePool = aPool to your Pool resource
1001 RecyclePool = Scratch
1005 kes Expand new BSOCK class adding signal() and new BNET signals.
1006 kes Begin enhancing the dot commands adding a new API function
1007 that returns more information and will make it easier
1008 to interface to the Director from a program.
1010 kes Make DEVICE fd private. Its new name is m_fd, and can be
1011 obtained with dev->fd() outside the class. This is the
1012 first of many DEVICE members to be made private.
1013 kes Implement Michael Renner's idea on having a virtual disk
1014 changer. I made some minor modifications (e.g. I did not
1015 implement the Virtual Changer directive, but simply set
1016 the Changer Command to an empty string.
1018 kes Implement a BSOCK send() method that writes the whole record
1019 in a single write() request rather than in two.
1020 ebl add update volume=xxx recyclepool=yyyy
1021 volume takes recyclepool from pool when using update volume=xxx from pool
1023 kes Fix encryption deblocking bug, which caused some restored files
1024 to be truncated. This fixes bug #763.
1025 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1026 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1028 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1029 ebl Use btime_t instead of uint64_t in media patch.
1031 kes Optimize the use of the database a bit in the Status dir command.
1032 Only open it when needed, ensure that if any previous database
1033 was opened, it is closed.
1035 kes Correct VolCatBytes bug from media patch.
1036 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1037 in the case of orphaned records.
1038 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1039 and File records in 300K chunks to be more efficient. This
1040 idea came from Juan Luis Frances (if I remember right).
1041 kes Apply Eric's scratch patch that moves a purged Volume to
1042 the RecyclePool. Question: how is RecyclePool set? what
1043 happens to the ScratchPool?
1044 kes Apply Eric's media patch that collects read/write media
1045 times as well as byte counts. This patch requires a
1046 simultaneous upgrade of the DIR and SD. Note, there
1047 should be some way to turn off timing. I'm not sure
1048 times are in Bacula units.
1049 kes Apply Eric's batch-insert patch.
1051 kes Update projects list.
1053 kes Implement Include/Exclude file lists in FD as dlists using
1054 the new dlistString class. This permits efficiently having
1055 large include/exclude lists and completes project Item 25.
1056 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1057 console is authorized to cancel the job. This fixes bug
1059 kes Modify SD so that the VolCatJobs medium record is updated
1060 at the beginning of a Job rather than the end. This
1061 fixes bug #775 where exceeding MaxVolJobs caused jobs
1063 kes Added a mutex around getting and setting Volume information
1064 so that multiple simultaneous jobs will single thread.
1066 Switch to using Subversion
1067 kes Remove src/pygtk-console/ from configure
1069 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1070 plus the entrypoints.
1071 kes Apply patch supplied that corrects debug print
1072 in canceling jobs for max run time. Supplied as
1073 part of bug #621, which was previously fixed.
1075 kes Test on job_canceled() and sd_msg_thread_done inside
1076 loop starting the message thread to avoid a race condition.
1078 kes Remove rl_catch_signal from console.c as it conflicted
1079 with the header definition. Fixes bug #765.
1080 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1082 kes Clarify some stored/acquire messages to indicate if the
1083 problem is with read or append.
1085 kes Fix memory leak with storage ids in cats/sql_get.c
1086 kes Terminate watchdog earlier to avoid reference to released
1087 memory -- reported by Jason Austin.
1088 kes Move closing the database from jobq.c to the director daemon
1089 termination routine. This fixes memory leaks for shadow jobs
1090 (i.e. migration jobs).
1091 kes Free up the unique jobid chain items in migrate.c. This fixes
1092 a memory leak problem.
1093 kes Convert some ugly looking for statements to use foreach_alist
1094 in findlib/find.c. This will facilitate converting the structures
1095 to use dlist (for large include/exclude lists).
1096 kes Fix a bug in the btree.c and btree.h routines, then rename them
1097 rblist and add them to be built in src/lib. Include some new
1098 methods written by Rudolf Cejka that make the code more readable
1099 (hides some of the ugly casting).
1100 kes Add set_next() and set_prev() methods which make the code much more
1101 readable. Also add a new dlistString class that facilitates storing
1102 strings in dlists. To be used in the large include/exclude lists.
1103 kes Make some trivial modifications to lib/tree.h that use rblist
1104 rather than dlist for storing the tree links. This was suggested
1105 by Rudolf Cejka. The result of this is that the restore tree now
1106 uses red-black binary trees rather than simple linked lists. This
1107 should give rather dramatic speed improvements for directories
1108 contining large numbers of directories/files (more than 10000).
1110 kes Fix maxruntime bug #621.
1112 ebl Implement the include JobID in spool file name project.
1113 kes Reorder projects file in order determined by Jan 2007 vote.
1114 kes Implement item #12 on project list -- quick release of FD by
1116 kes Fix open of SQLite3 db where user does not have write permission
1117 so that DIR does not crash. Fixes bug #761.
1119 kes Add back missing @ in Win32 Makefile.
1120 kes Change 'Device not configured to autolabel' from INFO
1122 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1123 which should restart an indefinite # of times.
1124 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1125 other DIR specifications.
1127 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1128 Fix path quoting in SQLite scripts.
1129 Fix problems with SHGetFolderPath.
1131 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1133 kes Fix Job restart on error bug that promotes an Inc to a Full
1134 backup. This should fix bug #755.
1135 kes Add qt-console and first cut of code.
1139 kes Fix Bacula->Documentation link on Win32 to point to index.html
1140 instead of bacula.html. Fixed bug #750.
1141 kes Return JobId in db_get_job_record() when JobId==0. This should
1143 kes Do not release source pointers when restarting a failed job.
1145 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1146 This *should* fix bug #747.
1147 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1150 kes Modify USTORE constructor to set an empty store_source string,
1151 and don't copy the store_source string in a cancel. Hopefully
1152 this will fix Arno's seg fault, bug #744.
1153 kes Add back code to disable conio in configure. Fixes bug #743.
1154 kes Correct the Options scanner in the FD to correctly handle
1155 SHA1 option, which was eating the next option. Reported by
1157 kes Add code to indicate when the SD is spooling, spool wait, and
1158 despooling as requested by Alan Brown.
1160 Version 2.0.0 released: 4 January 2007