1 Technical notes on version 2.3
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
20 Improved status commands for Bat
21 Spooling/despooling status
22 Implement ftruncate for NFS devices
23 Add long term statistics job table
28 kes Make DEVICE Slot private and access it via a method.
29 Allows better control over when it is set and cleared.
30 kes Fix possible seg fault if SQL error.
32 kes Add Martin's fixes to argument scanning for the estimate
33 command. This fixes bug #1093.
34 kes Add debug code to SD.
35 kes Fix renaming a Volume, which used the wrong Volume name.
37 kes If operator has rewind tape, print warning, release tape and
38 try once more. If tape is positioned somewhere, something went
39 wrong, so mark the tape in error and try once more. Previously
40 this error was fatal, now it produces an error message.
41 kes Ensure correct volume name displayed during restore
42 kes Ensure that Volume is mounted for restore.
44 kes Fix a few more Coverity reported problems.
46 kes Apply Allan Black's status dir job count patch.
47 ebl Add information about IMPORT/EXPORT slots in mtx-script.
48 kes Enhance a couple of SD debug messages.
49 kes Tweak unload flag setting and ensure it is set during swap.
51 ebl Fix #1091 about bad output in estimate command.
53 kes Modify autochanger locking to attempt to avoid race
55 kes Make sure device not busy before doing label command.
56 kes Display open() errors except when polling. Previously too
57 many were suppressed. This should fix bug #1070.
58 kes Fix Win32 reparse points. Bacula will not recurse into any
59 reparse point directory, including mount points, unless the
60 directory is explicitly mentioned at the top level (same as
61 with Unix). A file that is linked to another file will be
62 backed up -- much as Unix does for hardlinked files.
65 kes Remove double quotes from ChangeLog and ReleaseNotes
66 kes Remove StorageId test when pruning and recycling (Eric's changes).
67 kes Remove old form of locking when getting volumes -- causes deadlock.
68 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
69 the name unique and to eliminate compile time error.
70 kes Add accurate.o to Win32 FD Makefile
72 kes Fix cats dll build on Win32 after db_update_job_end_record
73 calling sequence change.
74 ebl Switch to tokyo dbm instead of htable in accurate code
75 ebl Include tokyo dbm to bacula source tree
77 kes Fix buffer overruns detected by Coverity.
79 kes Tweak joblog display.
81 kes Implement --without-qwt
82 kes Fix layout of restore tree dialog
83 kes Add configure bat QWT libraries, so that bat can be built
84 with or without the QWT libaries.
86 ebl Add dummy tape driver for regression tests.
87 kes Make sure we unload the right slot when swapping.
89 kes Add debug times, reduce size of two-pool-changer test
91 ebl Tweak autoconf scripts for faketape
93 kes Improve SD reserve debug code.
94 kes Testing an improvement to free up volumes no longer in use.
96 kes Rework SD acquire for read to handle autochanger Volume
98 kes Implement regression that explicitly tests swapping a Volume
99 from one drive to another.
100 kes Enhance disk-changer to detect most error conditions.
101 kes Fix SD code so that it properly swaps a Volume between drives.
102 This fixes bug #1083.
104 kes Apply libdbi patch from Joao Freitas for regress and for
105 Bacula trunk. Regress now works with libdbi. Nice.
106 kes Apply .nobackup patch from bug #1077 submitted by
108 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
109 name into jobs cloned via the run directive.
111 kes Prevent a Volume that is being swapped from being freed from
112 the volume list. This will most likely fix, at least partially,
114 kes Fix strippath so that it does not get a buffer overrun and crash FD.
115 This fixes bug #1078.
116 kes Remove 50 millisec wait in SD that broke debugger.
117 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
118 that a job may run, counted from when the job was scheduled.
119 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
120 a job may block waiting for a resource, counted from when the job starts
121 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
122 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
123 that implements multiple commands per line in the console when using
124 readline. Modify the default to use a semicolon as the command separator.
126 ebl Fix SQL query in migration code.
127 ebl Make accurate mode with hash disk pass regression tests
129 ebl Implement first cut of accurate backup with hash disk.
131 kes Force unload of volume when wrong volume mounted in SD.
133 kes Fix bat seg fault at termination.
134 kes Add Bacula generated version to bat about box.
137 kes Experiment with allowing multiple read jobs.
138 kes Move final volume swapping code to DCR method and
139 call it from acquire_for_read().
140 kes When wrong volume is mounted during read, unload_autochanger.
142 kes Integrate the libdbi changes from Joao Henrique Freitas
144 kes Stop searching for Volumes in SD askdir if DIR returns the
145 same volume name twice in a row.
146 kes Close bat console windows first to eliminate error message
149 kes Tweak the swap Volume from one drive to another code so that
150 it now seems to work.
151 kes Resolve several problems with recycling that broke the new
152 code (these problems are in 2.2.9 as well).
153 kes Remove the volume lock when calling the sysop code.
154 kes Don't mark a reserved volume with no writers as unused otherwise
157 kes Rework class structures for VOLRES, DCR, and DEVICE to make
158 the method names a bit more logical, and for more logically
159 handling the responsibilities.
161 kes Remove redundant code in terminating the scheduler that just
162 causes a seg fault in many cases.
163 kes Cleanup releasing a volume and make it a DCR method.
164 kes Improve algorithm for detecting pre-reserved volume and
167 kes Tweak volume swapping code so it works.
168 kes Correct name overloading in mount.c
169 kes Replace released flag in VOLRES with reserved and add access
170 methods for the VOLRES class.
171 kes Prevent volume from being released while being swapped.
172 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
174 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
176 kes Refactor parts of stored/mount.c
178 ebl Add sanity checks for VolWriteTime and VolReadTime
179 ebl Take care of bad clock changes while computing VolWriteTime
180 and VolReadTime. This should fix or limit #1066
181 kes Correct error string numbers in dird/catreq.c
182 kes Restructure reserving, acquiring, and mounting volumes. Calls to
183 autochanger are deferred for mount.c -- simplifes the code.
185 kes Do not prune any running job. It just fails the job.
186 kes Lock the volumes when changing dev->reserved_device and marking
187 the volume unused otherwise the device can get reserved by
188 another job before the volume is released, thus blocking it.
190 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
191 kes Fix bug #1063, reuse of freed ptr in list nextvol.
192 kes Release regex compile buffer in filed/job.c
193 kes Add proper type of const char in sql_create.c
194 kes Turn off debug in daemon termination routines
195 kes Move free_volume_list() before devices are freed in stored.c
196 kes Fix reference to uninitalized stack variables in bregex.c.
197 This should correct bug #1067.
199 kes Fix possible seg fault in SD when freeing a volume entry.
201 kes Implement unload_dev() before swap device.
202 ebl Add statistics prunning with option and menu
203 kes Separate unload_dev() from unload_other_device() in autochanger.c
205 kes Apply patch from bug #1069 that corrects spurious error messages
206 when ACLs enabled on SGI but no ACL exists.
207 ebl Fix small segfault in bacula-sd when debug level is 500
208 kes Modify run_program() and run_program_full_output() to use
209 call by reference for the results string. This corrects a long
210 standing problem where the address of the string may be changed
211 in the subroutine but not in the calling program.
213 kes Re-enable code to remember last volume mounted on a non-tape
215 kes Add patch supplied in bug #1068 that fixes a SD crash when using
216 a Virtual autochanger.
217 kes Generate correct JobMedia records during spooling/despooling when
218 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
219 <tih@hamartun.priv.no> for excellent analysis and testing.
221 kes Tweak hash algorithm for htable using Martin Simmons idea
222 for doing a circular shift.
223 kes Remember what volume is in VTLs (previously turned off for
225 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
226 pointed out some problems in creating JobMedia records during
227 spooling with concurrent jobs. Fix the problem by updating the
228 start file position before despooling and generate a jobmedia
229 record at the end of despooling.
231 kes Fix handling of JobMedia records during spooling and when a
232 Volume is changed without actually writing data to the Volume.
234 kes Rework certain SD locking based on gdb tracebacks of deadlocks
235 sent by Eric. This code now uses only the volume_lock() rather
236 than the reservations lock when at EOM and acquiring a new
238 kes Ensure only one exit point in several subroutines.
240 kes Implement bsock code to permit locking. Use the new code in Verify
241 in the FD to prevent the heartbeat thread from disrupting the Verify
242 data sent to the Dir.
243 kes Modify SD locking to eliminate locking the reservations system from
244 outside the system. Use the volume lock when getting media data
245 and reserving a new volume at end of media.
246 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
247 when SD starts are not locked into place.
249 kes Fix error compiling runscript code on 64 bit machines.
250 kes Tweak Win32 mount point code.
251 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
252 cleared giving bad file estimate).
253 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
256 kes Keep Schedule run lists in order as suggested by
259 kes Implement autostart scripts for Debian.
260 ebl Implement upgrade catalog scripts.
262 ebl Apply jobstat patch for long term statistics. Have to implement
263 purge stats command and upgrade scripts.
264 kes Fix mtx-changer.in for broken Debian mt program.
266 kes Fix large number of JobMedia records reported by Eric Bollengier.
268 kes Apply doc fix from bug #1062.
269 kes Resolve crash and improper restore wx-console Win32 restore
270 GUI. Fixes bug #1065.
271 kes Update Win32 wxWidgets to latest version.
272 kes Attempt to do correct handling of Win32 mount points. Should
274 kes Fix Win32 FD backup/restore memory leak due to improper termination
275 of BackupRead/Write. This fixes bug# 1038.
277 ebl Reduce memory usage for accurate backup, working only with ctime
278 and mtime. (not all Lstat field)
279 About 40MB for my linux system (400.000 files)
281 kes Add dcr->reserved_volume flag that allows us to release a volume
282 even if it is not vol->released. This allows maxvol2 to work when
283 Volumes expire and we are already writing to the device (i.e. a
284 volume is pulled out from under us by another job terminating after
285 we reserve the drive).
287 ebl Permit multiple command/console per runscript definition.
288 RunScript { command = /bin/true ; command = /bin/false ... }
289 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
290 (restart an application) just after the VSS snapshot on windows.
291 kes Don't zap dcr values during release_volume() as they might
292 have the next Volume to be mounted.
293 kes Fix AIX prototype.
295 kes Second cut of drive switching during backup.
298 kes Update Win32 version of wxWidgets to most recent version.
299 kes Tweak Copy job details.
300 kes Rework dir_find_next_appendable_volume to make a bit more effort
301 to find a suitable volume before giving up.
303 kes Make ask_sysop_to_create... to return if waken from wait.
304 This helps get out of blocked conditions.
305 kes Experimental implementation of switch_device in reservations.
306 kes Implement FD version to allow easier protocol changes.
307 kes Add Plugin Options string -- not yet passed to FD.
308 kes Implement PluginOptions ACL.
310 kes Attempt to correct problems with restores with autochangers and
311 use counts going negative
312 kes Rework SD status command and implement API for bat. Implements
313 header, runing waitreservation, devices, volumes, spooling,
314 and terminated status keywords.
315 .status storage=xxx <keyword>
316 kes Clarify TLS error message by adding double quotes around name.
317 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
318 kes Pass jcr to tls routines so debug messages can be handled better.
319 kes Rework jobq resource allocation code, and possibly fix a bug
320 that caused reference counts to get out of sync.
322 kes Rename fd/dir plugin to use Bacula standard underscore.
323 kes Plugin work -- bring dir up to fd level.
324 kes Start implementation of VTL code
325 kes Fix Win32 build after adding new cats subroutine.
327 kes First cut at Duplicate Job implementation.
329 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
330 kes Start PluginOptions string, and refactor a bit of ua_run.c
331 ebl Apply Allan patch that permit to reset recyclepool.
333 kes Test patch -- possible fix or improvement for bug #1053
334 kes Refactor FD and SD status commands to permit new API code in
335 SD, and to fix Win32 build.
336 kes Win32 build is now working.
338 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
339 some ideas in patch from Scott Bailey.
340 kes Begin implementation of duplicate Job control.
341 kes Fix some of Win32 build after recent additions.
342 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
343 which causes the FD to detect whether or not the OS has the
344 honor no dump bit (*BSD systems), and if so, to skip backing up
345 any file with this bit set. The feature is enabled by setting
346 'honor no dump flag = yes' in the Options section of a FileSet.
348 kes Correct po warning message with datarootdir
349 kes Implement more code in dird.c to put configuration parsing in
350 a class rather than use globals.
351 kes Restructure SD status command for implementation of bat API
354 kes Suppress incorrect 'Will not descend from x into y' messages.
355 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
356 daemon globals used by parser.
357 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
359 kes Fix free of plugin_list when none exists.
361 ebl Apply accurate project patch.
363 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
364 on non-mempool object)
365 kes First cut of converting FD .status to work with bat API.
367 .status client=XXX header
368 .status client=XXX running
369 .status client=XXX terminated
370 kes Implement first cut of Copy Job.
371 kes Implement Catalog in Pool resource. It overrides catalog specified
372 in the Client resource.
374 kes Apply patch (with some difficulties) from Joao Henrique Freitas
375 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
377 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
378 ftruncate() actually works. In the case of some (cheap) NAS devices,
379 it does not, and so recycling NAS Volumes does not work. The code
380 simply unlink()s the file, then recreates it. This fixes bug #1011.
382 kes First incomplete cut of big malloc blocks for htable.
383 kes Tweak plugin code.
385 kes Plugin debug code + tweak a couple bat dialog layouts
387 kes Fix creating first JobMedia record during Migration to include
388 proper index. This caused slow restores of migrated jobs.
389 kes Temp fix to plugin name file_index.
390 kes Bacula backed up and restored a MySQL database.
392 kes Implement plugin restore.
393 kes Implement parsing of db_driver to give db_type index.
395 kes First cut of plugin restore code.
396 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
397 and do not strip paths on symbolic links.
398 kes Set catalog backup database and user name from values specified on
399 the ./configure line.
400 ebl Fix #1031 about wrong pool source information in job report.
403 kes Remove a redundant jcr argument to find_files, match_files, and
405 kes Implement '.status dir header|scheduled|running|terminated' that
406 prints the requested status section. With the exception of the
407 header, the other reports have fields separated by tabs (\t).
409 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
410 a resource embedded run command to find a since time if no explicit
411 since time was supplied on the command line.
412 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
413 that updates the state file at job termination time in addition to
414 when the daemon terminates.
416 kes First version where a plugin did a backup.
417 bpipe-fd.so created a backup file, wrote a test
418 string to it, and Bacua could restore this fabricated file.
420 kes Implement DB Driver = string for the DBI driver.
421 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
422 kes First cut of code for loading Win32 plugin dlls. Implement
423 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
424 and implement a dlfcn.h file based on opengroup's definitions of
427 kes First cut plugin directives.
429 kes Apply patch from bug #1049 to prevent stripping the path on a
431 kes Attempt to fix bug #1047 where stripping a path corrupts the
432 heap. Waiting for feedback.
433 kes Correct the Mount message not to suggest labeling a new tape
434 when doing a restore. Submitted by email by John Stoffel.
435 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
436 FD by using casting. Reported in bug #1042.
438 kes A bit of crypto cleanup. More later.
440 Release Version 2.2.8
442 kes Apply patch from Martin to correct bug #1040, bscan sets existing
444 kes Fixed important spelling error in doc -- bug #1045.
446 ebl Fix bextract to be able to extract non-portable Win32 data to
448 kes Move initialization of read/write res lock earlier in the code.
449 This fixes the crash with a null conf file. This fixes bug
451 kes Redefine CURES in lib/parse_conf to be URES and move it all
452 into lib/parse_conf.c -- this responds to bug #1042, but does
453 not fix it. The fix is not to compile with FORTIFY_SOURCE.
454 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
455 the trunk SVN. I don't think this was reported as a bug.
457 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
459 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
461 kes Add DataDespooling and DataCommitting status (committing is
462 the last despooling).
463 kes Finish implementation of new reservations code noted below.
465 kes Fix bsnprintf for float point numbers. I broke recently when
466 parameterizing some variables. This fixes bug #1036.
467 kes Undo recent reservations changes ... will apply them later
468 when they work better.
470 ebl Fixes #1034 which cause mysql to hang the connection after 8h
471 ebl Change default statistics target of filename.name and path.path
472 fields for PostgreSQL. This speeds lookup by indexes. Thanks
474 kes A few more tweaks to new reservation code. Make sure to clear
475 vol released flag when retaking volume. When reading label and
476 label is bad mark volume unused. When recycling, mark volume
477 unused so it can be renamed.
479 kes Fix reserve_volume() so it doesn't release a volume in use
480 (i.e. a volume entry not marked released). This should be
481 the last part needed to fix bug #1018.
483 kes Move Heartbeat documentation from Job to Director resource.
484 This fixes bug #1033.
486 kes Fix existing switch drive SD code to call autochanger to release
487 any old volume. This must be done to keep the autochanger from
488 releasing subsequently newly reserved volumes in doing a close().
489 This should fix bug #1018.
490 kes Fail if attempting to get console input in batch mode. This
491 should help fail RunScript console commands that are incomplete.
492 kes First cut implementing switch_drive() in SD (not actually called).
494 kes Implement first cut running console commands in a RunScript.
496 ebl Fixes bug #1028 where 'Selection Type' option was not usable
498 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
501 Release Version 2.2.7
503 kes Add new free_tls() entry point so that Win32 builds.
504 kes Fix compile warning in src/lib/util.c
505 kes Fix entry point for edit_job_codes() so that Win32 builds.
506 kes Fix seg fault Frank Sweetser reports in regression testing
507 on his systems. The problem was that the original author of
508 bsnprintf.c did not take into account the side effects of
509 using ++x in the argument to a #define.
510 kes Make SD protocol backward compatible with version 2.2.x.
512 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
513 because Bacula no longer restores sockets.
514 ebl Always use ignorecase fileset option on win32 FD.
516 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
517 that implements double quoting include names in conf files,
518 and also allows piping input by having the first character
519 be a vertical bar (|).
520 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
521 that implement %f in RunScripts to pass the FileSet name.
522 kes Skip leading | when lex input comes from a pipe as suggested
523 by Michael Stapelberg <michael@stapelberg.de>.
525 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
526 Nerijus Baliunas <nerijus@users.sourceforge.net>
528 kes Implement Plugin Directory and plugin events.
530 kes Implement a security enhancement: TLS authentication but no
531 encryption. Enabled by setting 'TLS Authentication = yes'.
532 Note when this is on, TLS encryption is turned OFF!
534 kes This patch corrects a problem where the maximum concurrent storage
535 jobs counter gets out of sync during restore jobs causing jobs to
536 'wait on max Storage jobs'. This patch fixes bug #1009.
538 kes This patch fixes bcopy so that it produces correct Volumes.
540 kes This patch eliminates spurious output to the console during a VerifyVolume
541 job that contains encrypted data. It fixes bug #1024.
543 kes This patch prevents the 'status dir' command from trying to use a scratch
544 volume and possibly moving it from one pool to another. This patch fixes
547 kes Add new include to postgresql.c suggested by Marc Cousins so
548 that it compiles correctly with pgre version 8.3.
550 kes Fix --archivedir addition to configure. Replace it with
551 --with-archivedir in configure.in This fixes the regression
553 kes This patch fixes bug #1012 where the job is canceled because
554 of Max Run Time exceeded when the job has not yet started.
556 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
557 one 'part' to write. Instead of each part being stored on disk,
558 written to DVD, then deleted from disk, all parts are written to disk,
559 and only the last is written and deleted from disk.
560 kes This patch fixes the status command to include the formating string for
561 JS_AttrInsterting. It fixes bug #1021.
562 kes This patch should fix the Mac OS X build problem on the latest
563 Darwin, where sys/types.h was not included correctly (apparently
564 due to a change in the Mac headers). The solution was to explicitly
565 ensure that it is defined for the ./configure.
566 This patch also has a rebuild of configure that includes the Debian
567 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
568 kes This patch should ensure that queued messages to the console are
569 displayed as soon as possible. It should fix bug 1007, but has been
570 reported not to work.
572 kes This patch fixes the infinite loop when trying to increase the
573 maximum number of volumes in a Pool during the add command.
574 This patch fixes bug #1008.
576 Release Version 2.2.6
578 db Remove extra data on estimate command in joblist for bat.
580 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
581 really change anything, but is the beginning of doing it *right*.
582 To do it completely right the LastWritten date must be passed to
583 the SD, but it is not yet done.
584 kes Minor tweaks to some bat restore SQL.
585 kes This patch fixes bug #1003 where putting the message output from
586 a Verify job into the catalog results in a recursive loop. The problem
587 seems to show up only with postgresql (to be verified).
588 kes Correct %x to %p in postgresql debug statement.
590 kes Fix bug #942 where lots of emails where generated when the heartbeat
591 interval was low and Bacula wanted a different tape from the one in
594 ebl Add new SD despooling attributes and Dir inserting attributes
595 job status codes in the catalog (Status table).
597 ebl Use qmake-qt4 instead of qmake when available (debian system).
599 kes Add a security warning to src/cats/make_catalog_backup.in indicating
600 that passing the password via the command line (arg 3) is insecure.
601 This responds to bug #990 (it doesn't fix it).
603 kes Set default debug_level to zero. This corrects bugs #991 and #993.
604 kes Fix a crash in bat when it cannot connect to the Director for example
605 if the Director is not running.
606 kes Remove redundant INDEX (JobId) from File table in the trunk.
608 kes Make explicit exception to GPL in LICENSE to permit linking
609 the Win32 FD with Microsoft VSS code.
610 kes Apply the Solaris package patch from
611 Masopust, Christian <christian.masopust@siemens.com>
612 kes Apply the patch to optionally add a timestamp in the debug output
613 submitted by Mariusz Czulada <manieq@wp.eu>.
615 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
616 backend (sql_strerror). Fixes bug #989
618 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
619 It applied with no problems.
620 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
622 kes Redirect stderror to stdin on mt status command in mtx-changer.in
623 since the status is returned on stderr on Solaris.
624 kes Activate Close button on tray-monitor window. This fixes
626 kes Check for NULL item in parse_conf.c before calling it. In the
627 case of Device, there is no item and this caused a seg fault when
628 Device appears in the conf file.
629 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
630 avoids pulling in config.h multiple times in some new code.
632 kes Fix spurious warning message printed when creating a volume with
633 a LabelFormat. This fixes bug #976.
635 Release Version 2.2.5
637 kes Add JobId in place of Job name in all the Jmsg() output.
638 kes Correct the APP_DESC for the Win32 storage service (remove an e).
640 kes Make maxvol-test and new more strict maxvol2-test work.
641 kes Print JobId in all Jmsg() job output.
643 kes Add new SD despooling attributes and Dir inserting attributes
644 job status codes. This fixes bug 961.
645 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
647 kes Fix doc issue. This fixes bug #963.
648 kes Fix listing performance problems in bat. Pointed out by
650 kes Remove old debug code.
651 kes Fix bat code that tests for Win32. This should fix bug #968
652 kes Query 5 list wrong Vol after migration. This fixes bug #960
654 ebl Fix #969 where user can't change Replace option in restore menu.
656 kes Save jcr in thread specific data (tsd) for each thread.
657 kes Make Dmsg() print JobId as -%u.
658 kes Make Jmsg, Emsg, and others automatically pickup the jobid
659 for the thread if it exists.
660 kes Remove old reservation debug jid code.
661 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
662 ebl Add an option that permit to specify spool size in job
663 definition. (Applying patches/testing/spoolsize_per_job.patch).
664 You must upgrade SD and DIR at the same time.
665 dvl Add new configuration item --archivedir
666 dvl Adjust regression tests to use tmp not /tmp. This will allow
667 multiple concurrent runs of the regression tests.
669 kes Fix race condition that drops final block written to volume.
670 This happens in rare cases with multiple simultaneous jobs
671 when the Volume fills. This fixes bug #964. May be related
672 to bug #935 and possibly #903.
673 kes Eliminate more strerror() and replace with bstrerror().
674 kes Remove BSD getopt and replace with unrestricted IBM version.
675 kes Fix Win32 build for changed calling sequences.
676 kes More tweaks to the mount volume routines to get everything
677 right. Changed variable name from find to have_vol, which is
678 much easier to understand.
679 kes Enhance btimer debug code.
681 kes Fix FD->SD authorization failure, which was due to spurious
682 wakeups from a pthread_cond_timedwait(). Simply check the
683 predicate before continuing. This fixes bug #953.
684 kes Add const char where needed (more to do). Remove temp debug code.
686 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
687 kes Don't overwrite error message in check_tables_version.
689 kes Unlock batch insert tables with same calls used elsewhere.
690 kes Allow starting 59 jobs a second.
691 kes Make SD session key more random.
692 kes Add retry for SQLite opening db if it fails. Probably helps
694 kes Suppress extra error messages during batch insert failure.
696 kes Add jcr to timer packets so if killed message can be sent to job.
697 kes Add JobId to all Dmsg() output.
698 kes Put some FD auth code on dbglvl rather than fixed.
699 kes Return insert attributes error message in db msg buffer to avoid
700 false error messages. Helps fix bug #966.
701 kes Separate batch init error messages. Probably helps fix bug #966.
702 kes Make SD code that contructs attribute insert check string lengths
704 kes If Dir gets an error during inserting attributes, cancel SD.
705 This reduces unnecessary error messages.
707 kes Correct search boolean for getting Volume info
708 ebl Cleanup batch insert code. Probably fixes bug #965.
709 kes Back out one small change to the reservation system (reserving a volume).
710 kes Rework how a Volume is mounted. It is now much more intelligent and
711 will always attempt to use any mounted volume if possible and reduces
712 calls to the Director asking about volumes.
714 kes Turn off some code when batch insert not enabled.
715 kes Edit FD name in connect error messages.
716 kes Rework the reservation system to take into account that the Director
717 might give us a Volume that is different from the current one being
718 used, and to ensure that we don't exceed Maximum Volume Jobs.
719 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
720 fatal error with multiple jobs running'
721 kes Add more debug code in reservation system.
722 kes Implement maxvol-test to check bug #947.
724 kes Add code to handle tray monitor separated from Win32 FD.
725 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
727 kes Add missed return in fixing verify bug -- trunk only.
728 ebl Fix a command parser issue causing a director segfault.
729 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
731 kes Increase the max block size to 4MB fixes bug #957.
732 kes ERABT if user sets min block size > max block size. Fixes bug #956.
733 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
734 is not properly mounted (recognized) during a poll.
735 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
736 Job that has differences reports Verify OK.
737 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
739 ebl Add an option to operate on all pools with update vol parameters.
740 This complete the project 20. Patch from Nigel Stepp.
741 ebl Add history support to bconsole when using readline.
742 Using Ctrl-D to exit doesn't update .bconsole_history
743 kes Modify new volume algorithm to use max MediaId for generating next
744 volume number rather than the count of Volumes. This should essentially
745 eliminate the failure rate if some volumes were deleted. Bug #921.
746 kes Begin implemention of Optimize Job Scheduling.
747 kes Implement restore callback that Dirk and I agreed on for bat
748 restore. This fixes bug #928. Restore of backup of zero files fails.
749 kes Fix SQL Catalog logging which broke with new db_escape_string
752 Release Version 2.2.4
754 kes Fix bacula_cats.def for new db_escape_string().
755 kes Increase size of name string when FD making connection to SD.
756 May fix bug #953. FD->SD connection failure.
758 kes Add code to help Dan debug 2drive-incremental-2disk test.
759 kes Add code to try to fix bug #908.
760 kes Add waits to multiple exit detection code to try to force pid
761 file to always be deleted.
762 kes Restore good dev.tar.gz to rescue set appropriate binary property.
764 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
765 trying to switch drives by checking for blocking before unblocking.
767 kes Cancel storage daemon in all cases where FD reports error. This
768 should fix virtually all cases of bug #920.
769 kes Fix db_escape_string() for MySQL which did not compile.
771 kes Fix error message that was clobbered when Dir tells SD it does not
772 have write permission on Volume. This should fix a minor point
773 in bug #942, but not the main problem.
774 kes Add code to cancel job in SD if FD connection fails. This should
776 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
777 dvl Pass jcr and db into db_escape_string() to enable better escaping
779 kes Fix migration code to get correct Volume name with multiple volumes
780 by skipping |. Fixes bug #936.
781 kes Implement patch supplied by Landon to fix bug #944 where using
782 TLS with bconsole uses 99+% of the CPU.
783 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
785 kes Move patches into patches directory.
787 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
790 ebl Using 'm' in bconsole will show messages like before,
791 and not memory usage.
792 kes Fix bug #935, and probably also bug #903 where files were not
793 restored. MediaId was not properly set in JobMedia record after
796 kes Suppress chown and chmod error messages if the FD is not running
799 kes Apply Martin Simmons' patch that should turn off the new API usage
800 when batch insert is turned off allowing building on older
802 kes Add ./configure search in qwt-qt4 for qwt package
804 kes Bacula is now free of 3rd party GPL copyrighted code!
806 kes Add guid_to_name.c/h which replace idcache.
807 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
809 ebl Detect if new PosgreSQL batch insert API is present.
810 kes Correct incorrect mempool call causing Director crash. Occurs on
811 systems without va_copy().
812 sb Update spec files for 2.2.1 release
814 kes Fix memory pool call in ua_output.c. bug #934.
815 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
816 Add test program to fnmatch.c
818 kes Integrate patch to README.vc8 from
819 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
820 edit it to get it into Unix patch format.
821 kes Implement mkpath.c to replace old FSF makepath.c
823 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
825 Release Version 2.2.1
827 kes Update POTFILES.in
828 kes Cleanup a few underquoted AC_DEFUNs in configure
829 kes Apply patch from Martin Simmons that adds a test for va_copy to
832 kes Fix bug #921 by increasing the number of tries to create a new volume
834 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
835 can be called multiple times. Implement a version for machines
836 without va_copy() that gets a big buffer.
838 kes Integrate more portable zone offset code into bsmtp.c
839 Submitted by Attila Fülöp.
841 kes Fix bad SD->FD return status reported by
842 (James Harper) <james.harper@bendigoit.com.au>
843 ebl Fix a bug in read_close_session which return random status
844 thanks to James Harper
846 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
847 and directory names during restore of single file/directories.
848 kes Add sanity checks to .sql command when string is empty. Hopefully
849 that will resolve Dirks Director crash.
851 kes Apply patch submitted by Martin Simmons that corrects a seg fault
852 in the bsmtp chat subroutine when debug is >= 10.
854 kes Fix Director crash when running bat SQL queries.
855 kes Add David's notes on Item 8: Copy pools.
857 kes Rework projects file to be current and ready for a vote.
858 kes Enhance lex scanner error message.
860 kes Tweak LICENSE file to mention BSD code.
861 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
862 if specified on the ./configure.
863 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
864 This class is intended to allow us to open a second bsock to the
865 Director while in the restore subdialog.
867 kes Fix configure to create bat Makefile before creating dependencies.
868 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
869 kes Add a tooltip to the tray monitor.
870 dvl Set the Director's PID file before dropping privs. This fixes
873 kes Update AUTHORs file
874 kes Increase the default max concurrent jobs to 20 in FD and SD to
875 correspond with the default .conf files.
876 kes Rewrite the Win32 service routines. This eliminates the 3 copies
877 some different, of the same file created by RN when porting the
879 kes Rearrange some of the Win32 directories and the placement of the files
881 kes Set DEVELOPER flag in version.h
883 ========================================================================
884 Release Version 2.2.0
886 kes Apply a second doc patch from Marc.
887 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
888 improves the tips section that discusses how to setup multiple
891 kes Update bat README file.
892 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
893 corrects a typo in the Recycle status check in db_find_next_volume().
894 This will probably fix a number of annoying problems with multiple
896 kes Modify most of dird/msgchan.c to use bsock class calls rather than
897 bnet calls -- no functionality change.
899 kes Modify the Verify output to specify if files are missing on
900 the Volume(s) or disk. Fixes confusion in bug #916.
901 kes When more than one Volume is read in a migration job, the last
902 Volume bytes reported are from the last read volume rather than
903 the last written volume. Fixed. This fixes bug #910.
904 kes Fix display of Recycle flag after update volume=foo recycle=yes.
905 It previously printed New Recyle flag is: no. This fixes bug
908 kes Correct seg fault when switching tape drives during restore.
909 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
910 be used until after 2.2.0 release.
912 kes Remove fnmatch() in SD that permitted wild card specifications.
915 kes Fix %g in filename returned by SQL for browse tree reported by
917 kes Fix configure so that it puts config.out in the cwd rather than
919 kes Attempt to fix the locking problem reported by Eric in bug #906.
920 kes Make berrno class to leave errno unchanged after constructor call.
921 kes Make bnet_server use the heap rather than the stack to allocate
922 its socket fd pointers to avoid a crash at termination. Problem
923 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
925 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
926 and putting it in depkgs-qt along with Qt4.3.
928 kes Rework code in acquire.c that switches drives for reading when
929 the Media Type does not match. This should fix bug #906
931 ebl Fix a director segfault during job setup #907
932 kes Correct seg fault in postgresql when first operation returns no
933 rows. Fixes Dirks File browser problem seg fault with bat.
935 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
936 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
939 kes Implement PopUp YES/NO dialog for bat.
941 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
943 kes Correct RunScript to terminate job in FD on failure.
944 kes Change abort_on_error and AbortJobOnError to fail_on_error
945 and FailJobOnError in RunScripts.
946 kes Minor tweaks of code formating in RunScripts, principally to
947 avoid depassing 80 columns.
949 kes Eliminate one #ifdef Win32 in bsmtp
950 kes Implement grow tool to grow a file for testing very large databases.
951 kes Add big-vol-test to test Bacula seeking with > 5GB.
954 kes Modify find_next_volume() to return all values in Media record.
955 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
959 kes Update Release notes
961 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
962 Warning, in previous beta version, all media get from scratch keep their
965 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
966 This should fix bug #842. Made a note to look at removing the temp
967 files at the end of the install.
968 kes Add ability to mount and unmount a file device providing it is
969 marked as being removable and has the appropriate mount and unmount
970 commands defined in the Device resource. This fixes bug #830.
971 kes When applying a storage override, release all previous storage
972 definitions rather than just prepending the new storage.
973 This should prevent a good deal of confusion.
975 kes Implement ./configure search for qwt libraries.
977 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
978 Win32 FD. This should fix bug #893.
979 kes Remove an unnecessary beep in Win32 init code.
980 kes Update copyright dates in Win32 executable about boxes.
981 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
982 code with a BSD getopt.c and getopt.h.
983 kes Remove sched.h from the Win32 compat directory -- not used.
984 kes Remove the Exit menu item from the Win32 tray monitor. If you really
985 need to shut it down, do it through the services panel or the command
987 kes Remove some inappropriate Bacula FSFE copyrights.
988 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
989 kes Fix regress config non-portable test as pointed out by
990 Florian Heigl <florian.heigl@gmail.com>
991 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
992 as pointed out by Florian Heigl <florian.heigl@gmail.com>
994 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
995 Reported by Frank Sweetser.
999 kes Fix client-only build.
1000 kes Integrate client-only fixes for bsys (initgroups) and conio from
1001 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1002 kes Make arguments to get_scratch_volume() in same order as other
1004 kes Rework the prune_volumes() subroutine so that after purging and
1005 no volume found in desired pool, it will check for a scratch
1006 volume. This prevents recycling the whole scratch pool.
1007 kes Add code to status storage to print boffset_t (largefile support).
1009 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1010 kes You now need a --with-qwt=<dir> to be able to build bat.
1011 kes Update src/win32/cats/bacula_cats.def to include the new
1012 db_get_query_dbids() call on Win32.
1014 kes Correct a problem when selecting a scratch volume and moving
1015 it to another pool that lost some columns.
1016 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1017 kes Enhance Autochanger error messages to include Volume and device name.
1018 kes Rework prune_volumes() code to take account of InChanger flag,
1019 and to handle recycling volumes going to the Scratch pool and
1020 current pool because the RecyclePool directive.
1021 kes Implement a better and more efficient db_get_query_dbids() to
1022 handle creating and passing back a list of DBIds.
1026 kes Start work on new more efficient DBId subroutine. First use
1027 will be for recycling volume to Scratch inchanger.
1028 kes Increase number of JobIds in pruning from 1000 to 10000.
1029 This to be replaced by above routine.
1030 kes Begin implementation of building Qt4 on Win32.
1031 kes Correct typo in fix I added for bad TLS shutdown.
1032 kes Pull 2.0.3 patches into patches directory.
1033 kes Update Release notes. Include qt-console in line count.
1034 kes Update Projects file.
1036 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1037 bug in migration code where a job that spanned two volumes
1040 kes Implement new BST_DESPOOLING blocked state. Change from locking
1041 during despooling in SD to blocking. This means that other threads
1042 can work with the device structure, in particular the reservations
1043 system while despooling.
1045 kes Fix return in reservation message queue that missed clearing
1046 the jcr lock (implemented 26Jun07 below).
1047 kes Rename a number of dev methods to make locking function names
1049 kes Document locking in lock.c. Move lock structures to new file
1052 kes Move reservations message lock to lock jcr only this
1054 kes Move main SD locking code into lock.c (new file).
1055 kes Update Win32 build to include lock.c
1059 kes Dirk committed the qwt library code for drawing graphs in bat.
1060 kes Tweak install of qwt so that it is integrated with ./configure.
1062 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1063 out by Eric (my typo).
1064 ebl Fix configure.in to get batch mode enable
1065 kes Return correct string from authenticate.cpp in bat when connecting
1067 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1068 spurious line drops when using TLS.
1069 kes Do not file reparse points when restoring a file that already
1072 kes Implement Windows reparse points -- similar to directories, but
1073 we do not descend into it. This is a first cut. They seem to
1074 be backed up, but restore is not yet tested.
1075 kes Remove restore_blocking in tls code when shutting a socket to leave
1076 it in blocking mode. Hopefully this will fix the encryption bug
1077 reported by Frank Sweetser.
1078 kes When opening a file for backup, tell the OS that we are going to
1079 read it sequentially -- optimization.
1080 kes Change variable names in authenticate_director() to not conflict
1081 with member names in bat. Caused great confusion with compiler,
1084 kes Queue openssl error messages in case of comm problem.
1085 kes Do shutdown() call if socket terminated.
1086 kes Remove some duplicated code in tls.c
1087 kes Move more of the bsock member variables into private and access
1089 kes Add Frank Sweetser's tls-test to the regression suite.
1091 kes Add Swedish sv.po file
1093 kes Don't print clock skew message in FD if less than 3 seconds diff.
1094 kes Add a bit of VSS info to status client.
1095 kes Implement a first cut of Vista VSS, using Win2003 code.
1097 Release: 2.1.20 beta
1099 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1100 loaded tape but uses first drive).
1101 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1102 This was indeed a Win32 issue.
1104 kes Simplify search of autochanger for in-use Volume.
1105 kes Fix exit condition of check for in-use volume. kes Remove
1106 inappropriate my_postgresql_free_result() in db_close()
1108 kes Fix bad return in FD when encryption signature not found.
1109 Probably caused a crash.
1110 kes Inhibit missing encryption signature error messages for
1111 file types where no signature computed.
1112 kes Correct inverted check on autochanger in reservation system.
1113 kes Tweak debug code in autochanger reservation.
1115 kes Add some additional locking in the cats directory in subroutines
1116 that modify packet variables called from batch insert.
1117 kes Rework how dcrs are allocated. new_dcr() can now be called
1118 with an existing pointer, and it will simply clean it up.
1119 This allows the reservation system to test various different
1120 devices, and will permit easy device changes.
1121 kes A bunch of changes all over to handle new new_dcr() calling
1123 kes Work more on the Volume management in the SD. Remember Volumes
1124 for tape drives and for autochangers (even virtual disk changers).
1125 kes When looking at the Volume list to reserve a drive, handle
1126 autochanger names correctly by interating through the changer
1127 devices. Also call the Director to see if a Volume is suitable
1128 for the current job.
1129 kes Fix some bugs in bscan. Make sure all media records are written.
1130 Make sure that valid JobMedia records are written for disk files.
1131 Previously they were completely wrong.
1132 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1133 that the URLs don't change and so that the developers will all
1134 work off the same copy. Rebuild from scrach.
1135 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1137 Release: 2.1.18 beta
1139 kes Fix seg fault in FD from incorrect digest size.
1140 kes Fix argument to non-OpenSSL crypto.c subroutine.
1142 Release: 2.1.16 beta
1144 kes Remove a few malloc()s from the encryption code.
1145 kes Use the class calls to bsock in filed/backup.c and restore.c in
1146 place of the old bnet_xxx code.
1147 kes Implement code that does an on the fly calculation of the
1148 signing digest during restore of encrypted files. It makes
1149 a best guess at the algorithm, and if it is not correct, will
1150 then revert to the old code which reads the file after it is
1152 kes Implement at least one missing crypto stream in stream_to_ascii()
1153 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1154 #877 where a reload with bad syntax causes Dir to exit.
1156 Cut: 2.1.14 beta (not released)
1158 kes Do not free a volume on a tape drive until another volume is
1159 mounted and read, or the autochanger unloads the volume.
1160 This should help the SD re-use volumes that are already mounted,
1161 and should fix bug #886.
1162 kes Apply patch from user brettedgar that allows gnome2-console include
1163 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1164 kes Apply patch from Lucien Weller that fixes day of week calculation
1165 because of DST flag problem. Fixes bug #887.
1167 kes Move find_next_appendable_volume() to after acquiring a valid device
1168 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1170 kes Unable to reproduce bug 872. However added additional testing for
1172 kes Bug #874 resolved by documenting SQLite limitations.
1173 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1174 kes Bug #881 resolved by removing typo in mtx-changer script.
1175 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1176 approval. Added a link to the wiki on the web page, and implemented
1177 a backup from http://paramount.ind.wpi.edu
1179 kes Fix update allfrompool to pass pool name.
1181 kes Convert to pure GPL v2 license.
1182 kes Fix sscanf problems reported by Peter Buschman that caused
1183 a bus error on Solaris.
1184 kes Rework (simplify) the select prompt in bat.
1185 kes Move get_jobid_from_tid() into lib and create a
1187 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1188 should definitely fix the problem of lost error messages in the
1190 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1191 kes Eliminate tcpd.h from the project. Enclose the #include from the
1192 library with extern C ...
1193 kes Add print of signal name when a signal is trapped.
1195 Release: 2.1.12 beta
1197 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1199 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1200 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1201 makes SQLit3 run 30 times faster, though a bit less safe.
1202 kes Implement --with-batch-insert in configure and detection of thread
1203 safe libraries. It is on by default, but turned off if no thread
1204 safe library (e.g. SQLite 2) is available.
1206 kes Fix Bacula PostgreSQL buffer overruns.
1207 kes Do better checking for NULL results returned from PostgreSQL;
1208 implement retry for failed queries; clear results buffer after
1209 failed query. Hopefully this will correct the PostgreSQL failures.
1211 kes Implement algorithm to handle only one appendable volume with
1212 Prefer Mounted Volumes = no.
1213 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1214 returned from a query.
1215 kes Make volume lock recursive.
1216 kes Implement an additional volume reservation algorithm that
1217 starts by considering all reserved volumes then uses the
1218 old brute force algorithm of searching the resources to
1219 find a suitable device.
1220 kes Add new reservations debug code and refine the old code.
1221 kes Update the win32/dll/bacula.defs file.
1223 kes Tweak reservations algorithm to permit a few more cases, i.e.
1224 volume reserved, but on different drive, ...
1225 kes Enhance SD status to include Pool and Media Type for drive in a
1226 more readable format (a bit longer).
1227 kes Fix PostgreSQL double free.
1229 kes Minor refactoring of restore decryption code.
1230 kes Add code to smartall.c to detect double free of a buffer.
1232 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1233 so that bsmtp will create a correct email address (mailbox only).
1234 kes Modify 'memory' command so that the buffers are listed as 'In use'
1235 to avoid confusion with Orphaned buffers.
1236 kes I reworked the OpenSSL include/lib flags to be handled in
1237 the standard Bacula way, which should fix bug #863 concerning
1238 non-standard OpenSSL libraries.
1240 kes Implement Help Browser window for bat.
1241 kes Fix reload bug that reset StorageId to zero.
1243 kes Fix TLS #ifdefing when TLS turned off.
1244 kes Ensure that when labelling a tape with Slot=0 that InChanger
1246 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1248 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1249 add DISTINCT (required by PostgreSQL).
1250 kes Implement BSOCK authenticate_director() method. Eventually will
1251 authenicate all daemons.
1252 kes Move several more functions into the BSOCK class.
1254 kes Add code to tell the OS that we no longer need a cached
1255 file that we were reading. In findlib/bfile.c. Also,
1256 only cache files that we are reading. Thanks to
1257 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1258 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1259 kes Implement script to automatically generate cats and dll .def
1260 files for Win32 dll.
1261 kes Update README.mingw32 to include new .def file generation.
1262 kes Correct typo in UTF-8 error message as reported by:
1263 jhernandez <julianhernandez@gmail.com>
1264 kes Add additional sm_check() code on debug level 1.
1265 kes Set default debug level to 1.
1266 kes Trap SIGABRT in attempt to get traceback.
1268 kes Reduce bat connect timeout from 30 to 15 seconds.
1269 kes More restructuring and implementing BSOCK class in place of
1271 kes Remove a few unnecessary malloc() tests in crypto code.
1272 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1273 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1274 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1276 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1278 kes Fix Verify InitCatalog. The attributes were not pointing to the
1279 correct saved location.
1280 kes Implement message callback so that GUI is sure to get all
1281 daemon messages. Currently displayed in a dialog in bat.
1282 kes Ignore SIGUSR2 (Bacula timer) in bat.
1283 kes Apply regress patch from bug #859 to allow regress to work
1284 with Solaris compiler.
1286 kes Begin adding TLS support to bat.
1287 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1288 clean up lex.c and make it more readable.
1290 kes Move more bnet functions into the BSOCK class.
1291 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1292 kes Complete change of berrno strerror() method to bstrerror()
1294 Release: 2.1.10 beta
1296 kes Cleanup incorrect email addresses in bsmtp.
1297 kes Make bat display initial messages rather than discard them.
1299 kes First cut of adding .mod to the run command.
1300 kes Implement auto display of messages in bat.
1301 kes Enhanced preferences to allow all Bacula output to be
1304 kes Try to make bsmtp date routines more generic.
1305 kes Fixed bug #856 autochanger documentation.
1306 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1307 kes Add new cats entry point so Win32 builds.
1309 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1311 kes Do better checking for the MySQL 64 bit libraries looking for both
1312 .a and .so libraries.
1313 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1314 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1315 kes Require the thread safe version of MySQL during configure. Thanks
1316 to Andre Noll for pointing this out.
1317 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1318 continuing in migration code.
1319 kes Apply implementation of tray-monitor font derived from gnome-console
1320 submitted by Andreas Piesk <a.piesk@gmx.net>
1322 kes Eliminate important memory loss in SQLite
1323 kes Fixed the batch insert MySQL thread specific data that was not
1324 being freed. See cats/mysql.c:db_thread_cleanup().
1325 kes Fix restore before command.
1326 kes Convert old hdr.name to name() in a few places.
1327 kes Implement update jobid command.
1328 kes Return all time_t dates in db_get_job_record()
1329 kes Stop watchdog in SD earlier.
1330 kes Put Pool just after Storage in please mount message.
1331 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1334 kes Update the po files.
1335 kes Fix Verify InitCatalog by making it cache attributes.
1337 kes Change name bacula-bat to bat for man 1 page to correspond to
1339 kes Check for client and store NULL pointers in status command. This
1341 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1342 kes Fix sign extended editing of %p.
1343 kes Clean out a little old #ifdefing in cats/mysql.c
1345 kes If time diff between DIR and FD is more than 600 seconds convert
1346 INFO message to WARNING.
1347 kes Implement heap size display in status for all daemons.
1348 kes Attempt to fix MySQL db open memory loss (not successfull).
1349 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1350 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1351 Query. This looks like a MySQL but but by doing extra releases,
1352 the memory goes away. This should fix bug #847.
1354 kes When backup fails, cancel SD before waiting for sd termination.
1355 kes If SD is waiting for FD to connect during cancel, wake up the
1357 kes Fix fsf code so that errno is correctly reported.
1358 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1360 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1361 so that Bacula doesn't later stumble into a seg fault.
1362 kes Use the term Restore Client in the restore Job report.
1363 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1364 the original job's FileSetId.
1365 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1366 spooling in migration jobs. Not yet tested.
1367 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1368 reading conf file from a pipe. However, do it with open_bpipe()
1369 rather than popen. Not yet tested.
1371 kes Fix an ugly bug where the VolCatBytes were getting updated
1373 kes Implement bconsole memory command that prints current memory
1374 usage, plus smartalloc dump.
1375 kes Clarify some error messages in backup, admin, and migrate.
1376 kes Shrink label dialog to smaller size.
1377 kes Invert Cancel OK buttons on restore to be OK Cancel.
1378 kes More strerror() to bstrerror() conversions.
1380 kes Start implementing bstrerror() in place of strerror().
1381 kes Stripping path -- seems to work.
1383 kes Prevent door and port files from being restored (mostly
1385 kes Free an unreleased buffer in compat code.
1386 kes Change console Job name from *Console* to -Console- to eliminate
1387 Win32 filename problems. Put Win32 path separator when creating
1388 Console file. This fixes bug #846.
1389 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1391 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1393 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1394 to force Win32 error message.
1396 kes First cut strip path. The data should be passed to the FD,
1397 but nothing is done with it yet.
1398 kes Enhance the digest and signature routines in the crypto
1399 library to accept a JCR and to use it to print error messages
1400 so that they will go in the Job report rather than the daemon's
1402 kes Simplify some of the verify signature code.
1403 kes Simplify a few of the alternative returns in the signature
1406 ebl Use only POSIX regex instead of GNU regex in breg.c for
1407 File relocation. It fix broken freebsd compilation.
1408 kes Convert all other Dir files to use new ua class message
1410 kes Tentative fix for missing digest signature in bug 807.
1411 kes Correct handle problem in new win32_ftruncate routine.
1412 kes Convert ua_purge.c and ua_update.c to use new ua class
1413 message routines for bat.
1415 kes Correct incorrect installation of LICENSE in Win32 installer.
1416 kes Display LICENSE at the beginning of the Win32 install.
1417 kes Attempt to correct the need for the png files to be installed
1419 kes Reapply my bat.conf install script in qt-console. I think I
1420 editted bat.pro instead of bat.pro.in and it was lost.
1421 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1422 the /var/lock/subsys for subsysdir. Also corrects typos in the
1425 kes First cut update job.
1426 kes Correct configure to include qmake of src/qt-console directory.
1428 kes Make restore job yes/mod/no print in one command so GUI works.
1429 kes First cut implementing backup and restore client.
1430 kes Correct editing in Verify output that caused a seg fault.
1432 kes Insure that bat.conf is not overwritten during installation.
1433 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1434 while I was implementing migration in March 2006 !
1436 ebl Cleanup file relocation, using char *RegexWhere instead of
1437 char *where + bool where_use_regexp
1438 kes Update some manpages and add bat manpage.
1439 kes Make a first cut at converting bacula.spec.in for bwx-console
1441 kes Apply patch from John Goerzen to add hostname as fourth argument
1442 to make_catalog_backup script.
1443 kes Fix typos I introduced into bsmtp.c
1444 kes Make pm_strxxx() routines handle input of NULL pointer. This
1445 is to protect from NULL pointers returned from SQL databases.
1446 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1447 kes Add more debug to FIFO code -- fix fifo regression test.
1449 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1450 kes Add thread timer to bnet_connect() to break from OS if wait time
1453 kes Update Win32 build to include new files, new symbols, and
1455 kes Implement socket level heartbeat (tcp_keepidle)
1456 ebl Commit File relocation patch
1457 kes Make bat have 'make install' target.
1458 kes Warn during install if old gnome-console binary found.
1459 kes Warn during install if old wx-console binary found.
1460 kes Add -8 option to bsmtp command line to add content type utf-8.
1461 Fixes bug #809. (Character coding problem in bsmtp).
1462 kes If < is found in target (from, to, cc) then do not enclose the
1463 target in < > in bsmtp. Fixes bug #772 (malformed address).
1464 kes When printing certain items in dbcheck, stop after 300000.
1465 Fixes bug #822. (dbcheck loops).
1466 kes Incorrect status in Dir after waiting for mount with poll set.
1469 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1471 kes Print waiting to reserve a device every 5 mins.
1473 kes Don't call close_part in label.c if tape and relabel.
1474 kes Don't free volume if busy in close() -- should help with
1476 ebl Fix #824 RunScript bug (After script could be execute twice)
1477 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1478 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1479 Add a regression script to test RunScript
1481 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1484 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1485 deprecated. No additional bugs will be fixed, and they will be dropped
1486 in a future release (probably 2.4.0).
1487 kes Change name of wx-console to bwx-console to make it more Bacula
1489 kes Change the name of gnome-console to bgnome-console to make it
1492 kes Some time in March, a Feature Request with patch from Jorj Bauer
1493 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1495 The ability for the director to validate a Client (FD) CN against
1496 an arbitrary set of patterns rather than the hostname, with
1497 A new 'TLS Allowed CN' set of directives which are implemented
1498 in the Client resource. Then pattern matching is used in place
1499 of hostname matching against the Certificate's CN. As an example, we
1500 have certificates which (a) use a local CA, and (b) have a CN of the
1502 kes Add new/changed entry points to Win32 build
1503 kes Create unaccepted-projects for projects that are not accepted.
1504 kes Simplify locking in the reservations system.
1505 kes Add more debug code in reservations.
1506 kes Make sure error condition on reserving a volume is handled correctly.
1507 kes Correct handling of volume_in_use.
1508 kes Correct handling of initializing a device.
1509 kes Move handling of broadcasting releasing a device into release_device().
1510 kes Correct attaching dcr to dev so that it is only done if device
1511 is properly initiated.
1513 kes Locking debug level tweaks in SD.
1514 kes Tweak new Volume code.
1516 kes Add exec external-command [wait-seconds] to bconsole. This
1517 executes the external-command. Note! normally external-command
1518 should be enclosed in double quotes.
1519 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1520 it should normally be off in a production system.
1522 kes Implement die command for SD so that we can force it to dump.
1523 kes Implement SD lock debug code.
1524 kes Implement new algorithm for keeping Volume list in SD. It
1525 is now owned by the device.
1527 kes Implement new code for freeing in use volumes that should
1528 resolve if not all, some of the problems of multiple drive
1529 tape conflicts described in bug 801.
1531 kes Fix gui/bacula-web/images files in svn.
1532 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1534 ebl Fix a bug in batch mode (in string escape)
1535 kes Correct migration prune SQL typo that crept in in a
1536 recent 2.1.x change.
1538 kes Move bnet_despool() into class in bsock.c
1539 kes Modify job report to include director name and Build OS.
1540 kes Move drop root privilege and check_catalog() before fork.
1541 kes Add update database scripts (version 9 to 10) to updatedb directory.
1543 ebl Check size and age of each file after its backup to see if
1544 it has changed during backup, if 'checkfilechanges' is set.
1545 The FD will do an extra check (stat(2)) after
1546 each file backup. mtime, ctime and size are compared with
1547 'before backup' information. If time or size mismatch, an
1548 error message will be generated. You must upgrade FD to use it.
1550 kes Make database name and user configurable
1551 --with-db-name=xxx --with-db-user=xxx
1552 kes Add back database type to message.c for debugging.
1554 kes Implement dir_sql() which issues an SQL query.
1555 kes Modify bat medialist to use dir_sql() and do some minor C++
1556 formatting as well as eliminating a number of pointers, simplifing
1559 kes Fix some of the mtx-changer grep commands for tape label readers.
1560 kes Convert a number of bsendmsg into the appropriate send/warning/error
1561 message class calls.
1562 kes Suppress the using database message in the .sql command.
1563 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1565 kes Add context menu for floating a window.
1566 kes Some minor cleanup and name changes in qt-console
1567 kes Add doing mt setblk 0 in Win32 mtx-changer.
1568 kes Apply Martin's bug fix to move definition of ENODATA for
1570 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1571 sqlite2 and sqlite3.
1573 kes More pruning cleanup.
1574 kes Turn on wait_for_drive by default in mtx-changer.
1575 kes Turn on Batch insert code by default as it now passes regression.
1576 kes Add ./configure --enable-bat to enable building of Bat.
1577 No install yet though.
1579 kes Implement a new .sql command for bat.
1580 kes Implement code to turn off pruning in obtaining the next volume.
1581 Pruning is turned off for the status dir command, but turned on
1582 for SD requests and for the list nextvolume command.
1584 kes Correct Qmsg() that was not updated correctly when committing a
1585 previous change (probably the recent TLS patch).
1587 kes Write new subroutine is_volume_purged() that explicitly checks
1588 if the Volume is purged, and if so marks it as such. This should
1589 resolve problems reported about needing to mount twice to recycle
1591 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1592 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1593 amount of duplicated code.
1594 kes Do volume pruning only for the Media Type desired (reduces pruning time
1595 if multiple Media Types are in the same pool).
1596 kes Implement more detailed info in the Job report for the Bacula version
1598 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1600 ebl Add bbatch tool to bench database and insert mode.
1601 Fix sql quote stuff in batch mode
1602 Fix sql stuff for mysql
1604 kes Correct problems with am/pm scheduling. Fixes bug #808.
1605 kes Implement new prunning code that prunes up to 1000 jobs at
1606 the same time. The same technique can be applied to a number
1607 of other prune/purge subroutines.
1608 kes Add an insanity check when starting a new tape job to ensure
1609 that the tape position has not been changed. If so fail the
1611 kes Fix Win32 build for dlls to add the folllowing:
1612 src/lib/bsock.c -- new file with new entry points
1613 src/lib/dlist.c -- new entry points
1614 src/cats/sql_create.c -- new entry point
1615 src/cats/sql_cmds.c -- new DATA item exported
1617 ebl batch mode cleanup bscan-test is ok now.
1618 kes Implement SD code to check length of disk volume before appending.
1620 kes Correct return status on db_batch... routines.
1621 kes Add call to db_write_batch_file_records() to migration code.
1622 ebl Fix AfterJob timing
1623 kes Move the checking of the database in initializion of the Director
1624 to after we drop privileges. This avoids the need for both root
1625 and bacula access to the DB.
1626 kes Correct a misplaced variable definition in src/filed/backup.c
1627 kes Correct how the new batch insert db_create_attributes_record()
1628 uses the arguments. Caused a seg fault in bscan.
1629 kes Implement lock() and unlock() methods in DEVICE class.
1630 Implement block() and set_block(xx) methods in DEVICE class.
1631 kes Modify bnet_connect() so that it uses time() to check for the
1632 wait time expiring (on some OSes, some system calls may not
1633 return immediately).
1634 kes Modify Verify to obtain the previous JobId when it is actually
1635 running rather than at schedule time (as it was in 1.38.x).
1636 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1638 kes When checking pid in pid file, continue running if the pid is
1639 the same as ours. This occurs on IRIX after a system crash.
1642 kes Extend new GUI API.
1643 kes Make the ua structure a class, and implement send_msg(),
1644 error_msg(), warning_msg(), and info_msg().
1646 kes Apply fix from for building wx-console on the Mac from
1648 kes Implement new select mechanism for GUI programs.
1649 kes Reorganize initialization of stackedWidgets in bat.
1651 kes Add updated nagios plugin supplied by Christian Masopust.
1653 kes More bat implementation.
1654 kes File migrate bug with Pool Occupancy using mediaid instead
1655 of jobids. Fixes bug #795.
1656 kes Fix orphaned buffers in filed backup and verify due to
1657 crypto buffers not freed during errors. Fixes bug #789.
1658 kes Extend new GUI api code to tree commands.
1659 kes Ensure that tree and dot commands check console ACLs.
1660 kes Permit marking directory with trailing slash.
1661 kes Allow 20 console connections (instead of only 10).
1663 kes Add smartctl call to bacula-sd.conf as an example of getting
1666 kes Modify jobq.c to let simultaneous restore jobs run. This may
1667 cause them to fail if they cannot get a drive.
1668 kes Add Client Connect Wait to Storage daemon to permit users to
1669 modify the time the SD waits for a FD connection.
1671 kes Correct virtual changer check which was backwards. This caused
1672 volumes to be unloaded into slots already occupied.
1674 kes Apply Command ACL filter to JobId list in restore command.
1675 kes Correct typeo in var.c patch.
1677 kes Don't let Bacula prune File or Job records for the current Job.
1678 kes Fix variable substitution pad + inc bug reported (with patch)
1681 kes Correct SQLite log table index as reported by Luca Berra.
1683 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1685 kes Begin implementing new comm signals for API.
1686 kes Fix a few places in lib/message.c where the open fd may
1688 kes Continue implementing lib/bsock.c (real class). Make jcr,
1689 who, host, and port private. There are new methods to access
1690 them for non-class use. This required touching a number of files.
1692 kes Add LANG=C to autoconf/randpass so it works with languages other
1693 than English. Fixes bug #788.
1695 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1697 You will not be able to generate Include/Exclude list any more.
1698 It will be fixed soon.
1699 If you want to use this, you can apply
1700 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1702 kes Restore of sockets created false error messages because Bacula
1703 no longer restores sockets, but the code was still trying to
1704 set the attributes on a non-existent file. Reported by a user.
1705 ebl finish RecyclePool feature
1706 Media will takes Pool.RecyclePool
1707 when moving from Scratch to a Pool or when user will do
1708 update volume=xxx frompool
1709 To use it, add RecyclePool = aPool to your Pool resource
1712 RecyclePool = Scratch
1716 kes Expand new BSOCK class adding signal() and new BNET signals.
1717 kes Begin enhancing the dot commands adding a new API function
1718 that returns more information and will make it easier
1719 to interface to the Director from a program.
1721 kes Make DEVICE fd private. Its new name is m_fd, and can be
1722 obtained with dev->fd() outside the class. This is the
1723 first of many DEVICE members to be made private.
1724 kes Implement Michael Renner's idea on having a virtual disk
1725 changer. I made some minor modifications (e.g. I did not
1726 implement the Virtual Changer directive, but simply set
1727 the Changer Command to an empty string.
1729 kes Implement a BSOCK send() method that writes the whole record
1730 in a single write() request rather than in two.
1731 ebl add update volume=xxx recyclepool=yyyy
1732 volume takes recyclepool from pool when using update volume=xxx from pool
1734 kes Fix encryption deblocking bug, which caused some restored files
1735 to be truncated. This fixes bug #763.
1736 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1737 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1739 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1740 ebl Use btime_t instead of uint64_t in media patch.
1742 kes Optimize the use of the database a bit in the Status dir command.
1743 Only open it when needed, ensure that if any previous database
1744 was opened, it is closed.
1746 kes Correct VolCatBytes bug from media patch.
1747 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1748 in the case of orphaned records.
1749 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1750 and File records in 300K chunks to be more efficient. This
1751 idea came from Juan Luis Frances (if I remember right).
1752 kes Apply Eric's scratch patch that moves a purged Volume to
1753 the RecyclePool. Question: how is RecyclePool set? what
1754 happens to the ScratchPool?
1755 kes Apply Eric's media patch that collects read/write media
1756 times as well as byte counts. This patch requires a
1757 simultaneous upgrade of the DIR and SD. Note, there
1758 should be some way to turn off timing. I'm not sure
1759 times are in Bacula units.
1760 kes Apply Eric's batch-insert patch.
1762 kes Update projects list.
1764 kes Implement Include/Exclude file lists in FD as dlists using
1765 the new dlistString class. This permits efficiently having
1766 large include/exclude lists and completes project Item 25.
1767 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1768 console is authorized to cancel the job. This fixes bug
1770 kes Modify SD so that the VolCatJobs medium record is updated
1771 at the beginning of a Job rather than the end. This
1772 fixes bug #775 where exceeding MaxVolJobs caused jobs
1774 kes Added a mutex around getting and setting Volume information
1775 so that multiple simultaneous jobs will single thread.
1777 Switch to using Subversion
1778 kes Remove src/pygtk-console/ from configure
1780 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1781 plus the entrypoints.
1782 kes Apply patch supplied that corrects debug print
1783 in canceling jobs for max run time. Supplied as
1784 part of bug #621, which was previously fixed.
1786 kes Test on job_canceled() and sd_msg_thread_done inside
1787 loop starting the message thread to avoid a race condition.
1789 kes Remove rl_catch_signal from console.c as it conflicted
1790 with the header definition. Fixes bug #765.
1791 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1793 kes Clarify some stored/acquire messages to indicate if the
1794 problem is with read or append.
1796 kes Fix memory leak with storage ids in cats/sql_get.c
1797 kes Terminate watchdog earlier to avoid reference to released
1798 memory -- reported by Jason Austin.
1799 kes Move closing the database from jobq.c to the director daemon
1800 termination routine. This fixes memory leaks for shadow jobs
1801 (i.e. migration jobs).
1802 kes Free up the unique jobid chain items in migrate.c. This fixes
1803 a memory leak problem.
1804 kes Convert some ugly looking for statements to use foreach_alist
1805 in findlib/find.c. This will facilitate converting the structures
1806 to use dlist (for large include/exclude lists).
1807 kes Fix a bug in the btree.c and btree.h routines, then rename them
1808 rblist and add them to be built in src/lib. Include some new
1809 methods written by Rudolf Cejka that make the code more readable
1810 (hides some of the ugly casting).
1811 kes Add set_next() and set_prev() methods which make the code much more
1812 readable. Also add a new dlistString class that facilitates storing
1813 strings in dlists. To be used in the large include/exclude lists.
1814 kes Make some trivial modifications to lib/tree.h that use rblist
1815 rather than dlist for storing the tree links. This was suggested
1816 by Rudolf Cejka. The result of this is that the restore tree now
1817 uses red-black binary trees rather than simple linked lists. This
1818 should give rather dramatic speed improvements for directories
1819 contining large numbers of directories/files (more than 10000).
1821 kes Fix maxruntime bug #621.
1823 ebl Implement the include JobID in spool file name project.
1824 kes Reorder projects file in order determined by Jan 2007 vote.
1825 kes Implement item #12 on project list -- quick release of FD by
1827 kes Fix open of SQLite3 db where user does not have write permission
1828 so that DIR does not crash. Fixes bug #761.
1830 kes Add back missing @ in Win32 Makefile.
1831 kes Change 'Device not configured to autolabel' from INFO
1833 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1834 which should restart an indefinite # of times.
1835 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1836 other DIR specifications.
1838 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1839 Fix path quoting in SQLite scripts.
1840 Fix problems with SHGetFolderPath.
1842 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1844 kes Fix Job restart on error bug that promotes an Inc to a Full
1845 backup. This should fix bug #755.
1846 kes Add qt-console and first cut of code.
1850 kes Fix Bacula->Documentation link on Win32 to point to index.html
1851 instead of bacula.html. Fixed bug #750.
1852 kes Return JobId in db_get_job_record() when JobId==0. This should
1854 kes Do not release source pointers when restarting a failed job.
1856 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1857 This *should* fix bug #747.
1858 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1861 kes Modify USTORE constructor to set an empty store_source string,
1862 and don't copy the store_source string in a cancel. Hopefully
1863 this will fix Arno's seg fault, bug #744.
1864 kes Add back code to disable conio in configure. Fixes bug #743.
1865 kes Correct the Options scanner in the FD to correctly handle
1866 SHA1 option, which was eating the next option. Reported by
1868 kes Add code to indicate when the SD is spooling, spool wait, and
1869 despooling as requested by Alan Brown.
1871 Version 2.0.0 released: 4 January 2007