1 Technical notes on version 2.3
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
20 Improved status commands for Bat
21 Spooling/despooling status
22 Implement ftruncate for NFS devices
23 Add long term statistics job table
28 kes Fix possible seg fault if SQL error.
30 kes Add Martin's fixes to argument scanning for the estimate
31 command. This fixes bug #1093.
32 kes Add debug code to SD.
33 kes Fix renaming a Volume, which used the wrong Volume name.
35 kes If operator has rewind tape, print warning, release tape and
36 try once more. If tape is positioned somewhere, something went
37 wrong, so mark the tape in error and try once more. Previously
38 this error was fatal, now it produces an error message.
39 kes Ensure correct volume name displayed during restore
40 kes Ensure that Volume is mounted for restore.
42 kes Fix a few more Coverity reported problems.
44 kes Apply Allan Black's status dir job count patch.
45 ebl Add information about IMPORT/EXPORT slots in mtx-script.
46 kes Enhance a couple of SD debug messages.
47 kes Tweak unload flag setting and ensure it is set during swap.
49 ebl Fix #1091 about bad output in estimate command.
51 kes Modify autochanger locking to attempt to avoid race
53 kes Make sure device not busy before doing label command.
54 kes Display open() errors except when polling. Previously too
55 many were suppressed. This should fix bug #1070.
56 kes Fix Win32 reparse points. Bacula will not recurse into any
57 reparse point directory, including mount points, unless the
58 directory is explicitly mentioned at the top level (same as
59 with Unix). A file that is linked to another file will be
60 backed up -- much as Unix does for hardlinked files.
63 kes Remove double quotes from ChangeLog and ReleaseNotes
64 kes Remove StorageId test when pruning and recycling (Eric's changes).
65 kes Remove old form of locking when getting volumes -- causes deadlock.
66 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
67 the name unique and to eliminate compile time error.
68 kes Add accurate.o to Win32 FD Makefile
70 kes Fix cats dll build on Win32 after db_update_job_end_record
71 calling sequence change.
72 ebl Switch to tokyo dbm instead of htable in accurate code
73 ebl Include tokyo dbm to bacula source tree
75 kes Fix buffer overruns detected by Coverity.
77 kes Tweak joblog display.
79 kes Implement --without-qwt
80 kes Fix layout of restore tree dialog
81 kes Add configure bat QWT libraries, so that bat can be built
82 with or without the QWT libaries.
84 ebl Add dummy tape driver for regression tests.
85 kes Make sure we unload the right slot when swapping.
87 kes Add debug times, reduce size of two-pool-changer test
89 ebl Tweak autoconf scripts for faketape
91 kes Improve SD reserve debug code.
92 kes Testing an improvement to free up volumes no longer in use.
94 kes Rework SD acquire for read to handle autochanger Volume
96 kes Implement regression that explicitly tests swapping a Volume
97 from one drive to another.
98 kes Enhance disk-changer to detect most error conditions.
99 kes Fix SD code so that it properly swaps a Volume between drives.
100 This fixes bug #1083.
102 kes Apply libdbi patch from Joao Freitas for regress and for
103 Bacula trunk. Regress now works with libdbi. Nice.
104 kes Apply .nobackup patch from bug #1077 submitted by
106 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
107 name into jobs cloned via the run directive.
109 kes Prevent a Volume that is being swapped from being freed from
110 the volume list. This will most likely fix, at least partially,
112 kes Fix strippath so that it does not get a buffer overrun and crash FD.
113 This fixes bug #1078.
114 kes Remove 50 millisec wait in SD that broke debugger.
115 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
116 that a job may run, counted from when the job was scheduled.
117 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
118 a job may block waiting for a resource, counted from when the job starts
119 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
120 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
121 that implements multiple commands per line in the console when using
122 readline. Modify the default to use a semicolon as the command separator.
124 ebl Fix SQL query in migration code.
125 ebl Make accurate mode with hash disk pass regression tests
127 ebl Implement first cut of accurate backup with hash disk.
129 kes Force unload of volume when wrong volume mounted in SD.
131 kes Fix bat seg fault at termination.
132 kes Add Bacula generated version to bat about box.
135 kes Experiment with allowing multiple read jobs.
136 kes Move final volume swapping code to DCR method and
137 call it from acquire_for_read().
138 kes When wrong volume is mounted during read, unload_autochanger.
140 kes Integrate the libdbi changes from Joao Henrique Freitas
142 kes Stop searching for Volumes in SD askdir if DIR returns the
143 same volume name twice in a row.
144 kes Close bat console windows first to eliminate error message
147 kes Tweak the swap Volume from one drive to another code so that
148 it now seems to work.
149 kes Resolve several problems with recycling that broke the new
150 code (these problems are in 2.2.9 as well).
151 kes Remove the volume lock when calling the sysop code.
152 kes Don't mark a reserved volume with no writers as unused otherwise
155 kes Rework class structures for VOLRES, DCR, and DEVICE to make
156 the method names a bit more logical, and for more logically
157 handling the responsibilities.
159 kes Remove redundant code in terminating the scheduler that just
160 causes a seg fault in many cases.
161 kes Cleanup releasing a volume and make it a DCR method.
162 kes Improve algorithm for detecting pre-reserved volume and
165 kes Tweak volume swapping code so it works.
166 kes Correct name overloading in mount.c
167 kes Replace released flag in VOLRES with reserved and add access
168 methods for the VOLRES class.
169 kes Prevent volume from being released while being swapped.
170 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
172 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
174 kes Refactor parts of stored/mount.c
176 ebl Add sanity checks for VolWriteTime and VolReadTime
177 ebl Take care of bad clock changes while computing VolWriteTime
178 and VolReadTime. This should fix or limit #1066
179 kes Correct error string numbers in dird/catreq.c
180 kes Restructure reserving, acquiring, and mounting volumes. Calls to
181 autochanger are deferred for mount.c -- simplifes the code.
183 kes Do not prune any running job. It just fails the job.
184 kes Lock the volumes when changing dev->reserved_device and marking
185 the volume unused otherwise the device can get reserved by
186 another job before the volume is released, thus blocking it.
188 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
189 kes Fix bug #1063, reuse of freed ptr in list nextvol.
190 kes Release regex compile buffer in filed/job.c
191 kes Add proper type of const char in sql_create.c
192 kes Turn off debug in daemon termination routines
193 kes Move free_volume_list() before devices are freed in stored.c
194 kes Fix reference to uninitalized stack variables in bregex.c.
195 This should correct bug #1067.
197 kes Fix possible seg fault in SD when freeing a volume entry.
199 kes Implement unload_dev() before swap device.
200 ebl Add statistics prunning with option and menu
201 kes Separate unload_dev() from unload_other_device() in autochanger.c
203 kes Apply patch from bug #1069 that corrects spurious error messages
204 when ACLs enabled on SGI but no ACL exists.
205 ebl Fix small segfault in bacula-sd when debug level is 500
206 kes Modify run_program() and run_program_full_output() to use
207 call by reference for the results string. This corrects a long
208 standing problem where the address of the string may be changed
209 in the subroutine but not in the calling program.
211 kes Re-enable code to remember last volume mounted on a non-tape
213 kes Add patch supplied in bug #1068 that fixes a SD crash when using
214 a Virtual autochanger.
215 kes Generate correct JobMedia records during spooling/despooling when
216 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
217 <tih@hamartun.priv.no> for excellent analysis and testing.
219 kes Tweak hash algorithm for htable using Martin Simmons idea
220 for doing a circular shift.
221 kes Remember what volume is in VTLs (previously turned off for
223 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
224 pointed out some problems in creating JobMedia records during
225 spooling with concurrent jobs. Fix the problem by updating the
226 start file position before despooling and generate a jobmedia
227 record at the end of despooling.
229 kes Fix handling of JobMedia records during spooling and when a
230 Volume is changed without actually writing data to the Volume.
232 kes Rework certain SD locking based on gdb tracebacks of deadlocks
233 sent by Eric. This code now uses only the volume_lock() rather
234 than the reservations lock when at EOM and acquiring a new
236 kes Ensure only one exit point in several subroutines.
238 kes Implement bsock code to permit locking. Use the new code in Verify
239 in the FD to prevent the heartbeat thread from disrupting the Verify
240 data sent to the Dir.
241 kes Modify SD locking to eliminate locking the reservations system from
242 outside the system. Use the volume lock when getting media data
243 and reserving a new volume at end of media.
244 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
245 when SD starts are not locked into place.
247 kes Fix error compiling runscript code on 64 bit machines.
248 kes Tweak Win32 mount point code.
249 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
250 cleared giving bad file estimate).
251 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
254 kes Keep Schedule run lists in order as suggested by
257 kes Implement autostart scripts for Debian.
258 ebl Implement upgrade catalog scripts.
260 ebl Apply jobstat patch for long term statistics. Have to implement
261 purge stats command and upgrade scripts.
262 kes Fix mtx-changer.in for broken Debian mt program.
264 kes Fix large number of JobMedia records reported by Eric Bollengier.
266 kes Apply doc fix from bug #1062.
267 kes Resolve crash and improper restore wx-console Win32 restore
268 GUI. Fixes bug #1065.
269 kes Update Win32 wxWidgets to latest version.
270 kes Attempt to do correct handling of Win32 mount points. Should
272 kes Fix Win32 FD backup/restore memory leak due to improper termination
273 of BackupRead/Write. This fixes bug# 1038.
275 ebl Reduce memory usage for accurate backup, working only with ctime
276 and mtime. (not all Lstat field)
277 About 40MB for my linux system (400.000 files)
279 kes Add dcr->reserved_volume flag that allows us to release a volume
280 even if it is not vol->released. This allows maxvol2 to work when
281 Volumes expire and we are already writing to the device (i.e. a
282 volume is pulled out from under us by another job terminating after
283 we reserve the drive).
285 ebl Permit multiple command/console per runscript definition.
286 RunScript { command = /bin/true ; command = /bin/false ... }
287 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
288 (restart an application) just after the VSS snapshot on windows.
289 kes Don't zap dcr values during release_volume() as they might
290 have the next Volume to be mounted.
291 kes Fix AIX prototype.
293 kes Second cut of drive switching during backup.
296 kes Update Win32 version of wxWidgets to most recent version.
297 kes Tweak Copy job details.
298 kes Rework dir_find_next_appendable_volume to make a bit more effort
299 to find a suitable volume before giving up.
301 kes Make ask_sysop_to_create... to return if waken from wait.
302 This helps get out of blocked conditions.
303 kes Experimental implementation of switch_device in reservations.
304 kes Implement FD version to allow easier protocol changes.
305 kes Add Plugin Options string -- not yet passed to FD.
306 kes Implement PluginOptions ACL.
308 kes Attempt to correct problems with restores with autochangers and
309 use counts going negative
310 kes Rework SD status command and implement API for bat. Implements
311 header, runing waitreservation, devices, volumes, spooling,
312 and terminated status keywords.
313 .status storage=xxx <keyword>
314 kes Clarify TLS error message by adding double quotes around name.
315 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
316 kes Pass jcr to tls routines so debug messages can be handled better.
317 kes Rework jobq resource allocation code, and possibly fix a bug
318 that caused reference counts to get out of sync.
320 kes Rename fd/dir plugin to use Bacula standard underscore.
321 kes Plugin work -- bring dir up to fd level.
322 kes Start implementation of VTL code
323 kes Fix Win32 build after adding new cats subroutine.
325 kes First cut at Duplicate Job implementation.
327 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
328 kes Start PluginOptions string, and refactor a bit of ua_run.c
329 ebl Apply Allan patch that permit to reset recyclepool.
331 kes Test patch -- possible fix or improvement for bug #1053
332 kes Refactor FD and SD status commands to permit new API code in
333 SD, and to fix Win32 build.
334 kes Win32 build is now working.
336 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
337 some ideas in patch from Scott Bailey.
338 kes Begin implementation of duplicate Job control.
339 kes Fix some of Win32 build after recent additions.
340 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
341 which causes the FD to detect whether or not the OS has the
342 honor no dump bit (*BSD systems), and if so, to skip backing up
343 any file with this bit set. The feature is enabled by setting
344 'honor no dump flag = yes' in the Options section of a FileSet.
346 kes Correct po warning message with datarootdir
347 kes Implement more code in dird.c to put configuration parsing in
348 a class rather than use globals.
349 kes Restructure SD status command for implementation of bat API
352 kes Suppress incorrect 'Will not descend from x into y' messages.
353 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
354 daemon globals used by parser.
355 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
357 kes Fix free of plugin_list when none exists.
359 ebl Apply accurate project patch.
361 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
362 on non-mempool object)
363 kes First cut of converting FD .status to work with bat API.
365 .status client=XXX header
366 .status client=XXX running
367 .status client=XXX terminated
368 kes Implement first cut of Copy Job.
369 kes Implement Catalog in Pool resource. It overrides catalog specified
370 in the Client resource.
372 kes Apply patch (with some difficulties) from Joao Henrique Freitas
373 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
375 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
376 ftruncate() actually works. In the case of some (cheap) NAS devices,
377 it does not, and so recycling NAS Volumes does not work. The code
378 simply unlink()s the file, then recreates it. This fixes bug #1011.
380 kes First incomplete cut of big malloc blocks for htable.
381 kes Tweak plugin code.
383 kes Plugin debug code + tweak a couple bat dialog layouts
385 kes Fix creating first JobMedia record during Migration to include
386 proper index. This caused slow restores of migrated jobs.
387 kes Temp fix to plugin name file_index.
388 kes Bacula backed up and restored a MySQL database.
390 kes Implement plugin restore.
391 kes Implement parsing of db_driver to give db_type index.
393 kes First cut of plugin restore code.
394 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
395 and do not strip paths on symbolic links.
396 kes Set catalog backup database and user name from values specified on
397 the ./configure line.
398 ebl Fix #1031 about wrong pool source information in job report.
401 kes Remove a redundant jcr argument to find_files, match_files, and
403 kes Implement '.status dir header|scheduled|running|terminated' that
404 prints the requested status section. With the exception of the
405 header, the other reports have fields separated by tabs (\t).
407 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
408 a resource embedded run command to find a since time if no explicit
409 since time was supplied on the command line.
410 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
411 that updates the state file at job termination time in addition to
412 when the daemon terminates.
414 kes First version where a plugin did a backup.
415 bpipe-fd.so created a backup file, wrote a test
416 string to it, and Bacua could restore this fabricated file.
418 kes Implement DB Driver = string for the DBI driver.
419 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
420 kes First cut of code for loading Win32 plugin dlls. Implement
421 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
422 and implement a dlfcn.h file based on opengroup's definitions of
425 kes First cut plugin directives.
427 kes Apply patch from bug #1049 to prevent stripping the path on a
429 kes Attempt to fix bug #1047 where stripping a path corrupts the
430 heap. Waiting for feedback.
431 kes Correct the Mount message not to suggest labeling a new tape
432 when doing a restore. Submitted by email by John Stoffel.
433 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
434 FD by using casting. Reported in bug #1042.
436 kes A bit of crypto cleanup. More later.
438 Release Version 2.2.8
440 kes Apply patch from Martin to correct bug #1040, bscan sets existing
442 kes Fixed important spelling error in doc -- bug #1045.
444 ebl Fix bextract to be able to extract non-portable Win32 data to
446 kes Move initialization of read/write res lock earlier in the code.
447 This fixes the crash with a null conf file. This fixes bug
449 kes Redefine CURES in lib/parse_conf to be URES and move it all
450 into lib/parse_conf.c -- this responds to bug #1042, but does
451 not fix it. The fix is not to compile with FORTIFY_SOURCE.
452 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
453 the trunk SVN. I don't think this was reported as a bug.
455 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
457 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
459 kes Add DataDespooling and DataCommitting status (committing is
460 the last despooling).
461 kes Finish implementation of new reservations code noted below.
463 kes Fix bsnprintf for float point numbers. I broke recently when
464 parameterizing some variables. This fixes bug #1036.
465 kes Undo recent reservations changes ... will apply them later
466 when they work better.
468 ebl Fixes #1034 which cause mysql to hang the connection after 8h
469 ebl Change default statistics target of filename.name and path.path
470 fields for PostgreSQL. This speeds lookup by indexes. Thanks
472 kes A few more tweaks to new reservation code. Make sure to clear
473 vol released flag when retaking volume. When reading label and
474 label is bad mark volume unused. When recycling, mark volume
475 unused so it can be renamed.
477 kes Fix reserve_volume() so it doesn't release a volume in use
478 (i.e. a volume entry not marked released). This should be
479 the last part needed to fix bug #1018.
481 kes Move Heartbeat documentation from Job to Director resource.
482 This fixes bug #1033.
484 kes Fix existing switch drive SD code to call autochanger to release
485 any old volume. This must be done to keep the autochanger from
486 releasing subsequently newly reserved volumes in doing a close().
487 This should fix bug #1018.
488 kes Fail if attempting to get console input in batch mode. This
489 should help fail RunScript console commands that are incomplete.
490 kes First cut implementing switch_drive() in SD (not actually called).
492 kes Implement first cut running console commands in a RunScript.
494 ebl Fixes bug #1028 where 'Selection Type' option was not usable
496 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
499 Release Version 2.2.7
501 kes Add new free_tls() entry point so that Win32 builds.
502 kes Fix compile warning in src/lib/util.c
503 kes Fix entry point for edit_job_codes() so that Win32 builds.
504 kes Fix seg fault Frank Sweetser reports in regression testing
505 on his systems. The problem was that the original author of
506 bsnprintf.c did not take into account the side effects of
507 using ++x in the argument to a #define.
508 kes Make SD protocol backward compatible with version 2.2.x.
510 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
511 because Bacula no longer restores sockets.
512 ebl Always use ignorecase fileset option on win32 FD.
514 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
515 that implements double quoting include names in conf files,
516 and also allows piping input by having the first character
517 be a vertical bar (|).
518 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
519 that implement %f in RunScripts to pass the FileSet name.
520 kes Skip leading | when lex input comes from a pipe as suggested
521 by Michael Stapelberg <michael@stapelberg.de>.
523 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
524 Nerijus Baliunas <nerijus@users.sourceforge.net>
526 kes Implement Plugin Directory and plugin events.
528 kes Implement a security enhancement: TLS authentication but no
529 encryption. Enabled by setting 'TLS Authentication = yes'.
530 Note when this is on, TLS encryption is turned OFF!
532 kes This patch corrects a problem where the maximum concurrent storage
533 jobs counter gets out of sync during restore jobs causing jobs to
534 'wait on max Storage jobs'. This patch fixes bug #1009.
536 kes This patch fixes bcopy so that it produces correct Volumes.
538 kes This patch eliminates spurious output to the console during a VerifyVolume
539 job that contains encrypted data. It fixes bug #1024.
541 kes This patch prevents the 'status dir' command from trying to use a scratch
542 volume and possibly moving it from one pool to another. This patch fixes
545 kes Add new include to postgresql.c suggested by Marc Cousins so
546 that it compiles correctly with pgre version 8.3.
548 kes Fix --archivedir addition to configure. Replace it with
549 --with-archivedir in configure.in This fixes the regression
551 kes This patch fixes bug #1012 where the job is canceled because
552 of Max Run Time exceeded when the job has not yet started.
554 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
555 one 'part' to write. Instead of each part being stored on disk,
556 written to DVD, then deleted from disk, all parts are written to disk,
557 and only the last is written and deleted from disk.
558 kes This patch fixes the status command to include the formating string for
559 JS_AttrInsterting. It fixes bug #1021.
560 kes This patch should fix the Mac OS X build problem on the latest
561 Darwin, where sys/types.h was not included correctly (apparently
562 due to a change in the Mac headers). The solution was to explicitly
563 ensure that it is defined for the ./configure.
564 This patch also has a rebuild of configure that includes the Debian
565 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
566 kes This patch should ensure that queued messages to the console are
567 displayed as soon as possible. It should fix bug 1007, but has been
568 reported not to work.
570 kes This patch fixes the infinite loop when trying to increase the
571 maximum number of volumes in a Pool during the add command.
572 This patch fixes bug #1008.
574 Release Version 2.2.6
576 db Remove extra data on estimate command in joblist for bat.
578 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
579 really change anything, but is the beginning of doing it *right*.
580 To do it completely right the LastWritten date must be passed to
581 the SD, but it is not yet done.
582 kes Minor tweaks to some bat restore SQL.
583 kes This patch fixes bug #1003 where putting the message output from
584 a Verify job into the catalog results in a recursive loop. The problem
585 seems to show up only with postgresql (to be verified).
586 kes Correct %x to %p in postgresql debug statement.
588 kes Fix bug #942 where lots of emails where generated when the heartbeat
589 interval was low and Bacula wanted a different tape from the one in
592 ebl Add new SD despooling attributes and Dir inserting attributes
593 job status codes in the catalog (Status table).
595 ebl Use qmake-qt4 instead of qmake when available (debian system).
597 kes Add a security warning to src/cats/make_catalog_backup.in indicating
598 that passing the password via the command line (arg 3) is insecure.
599 This responds to bug #990 (it doesn't fix it).
601 kes Set default debug_level to zero. This corrects bugs #991 and #993.
602 kes Fix a crash in bat when it cannot connect to the Director for example
603 if the Director is not running.
604 kes Remove redundant INDEX (JobId) from File table in the trunk.
606 kes Make explicit exception to GPL in LICENSE to permit linking
607 the Win32 FD with Microsoft VSS code.
608 kes Apply the Solaris package patch from
609 Masopust, Christian <christian.masopust@siemens.com>
610 kes Apply the patch to optionally add a timestamp in the debug output
611 submitted by Mariusz Czulada <manieq@wp.eu>.
613 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
614 backend (sql_strerror). Fixes bug #989
616 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
617 It applied with no problems.
618 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
620 kes Redirect stderror to stdin on mt status command in mtx-changer.in
621 since the status is returned on stderr on Solaris.
622 kes Activate Close button on tray-monitor window. This fixes
624 kes Check for NULL item in parse_conf.c before calling it. In the
625 case of Device, there is no item and this caused a seg fault when
626 Device appears in the conf file.
627 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
628 avoids pulling in config.h multiple times in some new code.
630 kes Fix spurious warning message printed when creating a volume with
631 a LabelFormat. This fixes bug #976.
633 Release Version 2.2.5
635 kes Add JobId in place of Job name in all the Jmsg() output.
636 kes Correct the APP_DESC for the Win32 storage service (remove an e).
638 kes Make maxvol-test and new more strict maxvol2-test work.
639 kes Print JobId in all Jmsg() job output.
641 kes Add new SD despooling attributes and Dir inserting attributes
642 job status codes. This fixes bug 961.
643 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
645 kes Fix doc issue. This fixes bug #963.
646 kes Fix listing performance problems in bat. Pointed out by
648 kes Remove old debug code.
649 kes Fix bat code that tests for Win32. This should fix bug #968
650 kes Query 5 list wrong Vol after migration. This fixes bug #960
652 ebl Fix #969 where user can't change Replace option in restore menu.
654 kes Save jcr in thread specific data (tsd) for each thread.
655 kes Make Dmsg() print JobId as -%u.
656 kes Make Jmsg, Emsg, and others automatically pickup the jobid
657 for the thread if it exists.
658 kes Remove old reservation debug jid code.
659 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
660 ebl Add an option that permit to specify spool size in job
661 definition. (Applying patches/testing/spoolsize_per_job.patch).
662 You must upgrade SD and DIR at the same time.
663 dvl Add new configuration item --archivedir
664 dvl Adjust regression tests to use tmp not /tmp. This will allow
665 multiple concurrent runs of the regression tests.
667 kes Fix race condition that drops final block written to volume.
668 This happens in rare cases with multiple simultaneous jobs
669 when the Volume fills. This fixes bug #964. May be related
670 to bug #935 and possibly #903.
671 kes Eliminate more strerror() and replace with bstrerror().
672 kes Remove BSD getopt and replace with unrestricted IBM version.
673 kes Fix Win32 build for changed calling sequences.
674 kes More tweaks to the mount volume routines to get everything
675 right. Changed variable name from find to have_vol, which is
676 much easier to understand.
677 kes Enhance btimer debug code.
679 kes Fix FD->SD authorization failure, which was due to spurious
680 wakeups from a pthread_cond_timedwait(). Simply check the
681 predicate before continuing. This fixes bug #953.
682 kes Add const char where needed (more to do). Remove temp debug code.
684 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
685 kes Don't overwrite error message in check_tables_version.
687 kes Unlock batch insert tables with same calls used elsewhere.
688 kes Allow starting 59 jobs a second.
689 kes Make SD session key more random.
690 kes Add retry for SQLite opening db if it fails. Probably helps
692 kes Suppress extra error messages during batch insert failure.
694 kes Add jcr to timer packets so if killed message can be sent to job.
695 kes Add JobId to all Dmsg() output.
696 kes Put some FD auth code on dbglvl rather than fixed.
697 kes Return insert attributes error message in db msg buffer to avoid
698 false error messages. Helps fix bug #966.
699 kes Separate batch init error messages. Probably helps fix bug #966.
700 kes Make SD code that contructs attribute insert check string lengths
702 kes If Dir gets an error during inserting attributes, cancel SD.
703 This reduces unnecessary error messages.
705 kes Correct search boolean for getting Volume info
706 ebl Cleanup batch insert code. Probably fixes bug #965.
707 kes Back out one small change to the reservation system (reserving a volume).
708 kes Rework how a Volume is mounted. It is now much more intelligent and
709 will always attempt to use any mounted volume if possible and reduces
710 calls to the Director asking about volumes.
712 kes Turn off some code when batch insert not enabled.
713 kes Edit FD name in connect error messages.
714 kes Rework the reservation system to take into account that the Director
715 might give us a Volume that is different from the current one being
716 used, and to ensure that we don't exceed Maximum Volume Jobs.
717 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
718 fatal error with multiple jobs running'
719 kes Add more debug code in reservation system.
720 kes Implement maxvol-test to check bug #947.
722 kes Add code to handle tray monitor separated from Win32 FD.
723 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
725 kes Add missed return in fixing verify bug -- trunk only.
726 ebl Fix a command parser issue causing a director segfault.
727 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
729 kes Increase the max block size to 4MB fixes bug #957.
730 kes ERABT if user sets min block size > max block size. Fixes bug #956.
731 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
732 is not properly mounted (recognized) during a poll.
733 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
734 Job that has differences reports Verify OK.
735 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
737 ebl Add an option to operate on all pools with update vol parameters.
738 This complete the project 20. Patch from Nigel Stepp.
739 ebl Add history support to bconsole when using readline.
740 Using Ctrl-D to exit doesn't update .bconsole_history
741 kes Modify new volume algorithm to use max MediaId for generating next
742 volume number rather than the count of Volumes. This should essentially
743 eliminate the failure rate if some volumes were deleted. Bug #921.
744 kes Begin implemention of Optimize Job Scheduling.
745 kes Implement restore callback that Dirk and I agreed on for bat
746 restore. This fixes bug #928. Restore of backup of zero files fails.
747 kes Fix SQL Catalog logging which broke with new db_escape_string
750 Release Version 2.2.4
752 kes Fix bacula_cats.def for new db_escape_string().
753 kes Increase size of name string when FD making connection to SD.
754 May fix bug #953. FD->SD connection failure.
756 kes Add code to help Dan debug 2drive-incremental-2disk test.
757 kes Add code to try to fix bug #908.
758 kes Add waits to multiple exit detection code to try to force pid
759 file to always be deleted.
760 kes Restore good dev.tar.gz to rescue set appropriate binary property.
762 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
763 trying to switch drives by checking for blocking before unblocking.
765 kes Cancel storage daemon in all cases where FD reports error. This
766 should fix virtually all cases of bug #920.
767 kes Fix db_escape_string() for MySQL which did not compile.
769 kes Fix error message that was clobbered when Dir tells SD it does not
770 have write permission on Volume. This should fix a minor point
771 in bug #942, but not the main problem.
772 kes Add code to cancel job in SD if FD connection fails. This should
774 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
775 dvl Pass jcr and db into db_escape_string() to enable better escaping
777 kes Fix migration code to get correct Volume name with multiple volumes
778 by skipping |. Fixes bug #936.
779 kes Implement patch supplied by Landon to fix bug #944 where using
780 TLS with bconsole uses 99+% of the CPU.
781 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
783 kes Move patches into patches directory.
785 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
788 ebl Using 'm' in bconsole will show messages like before,
789 and not memory usage.
790 kes Fix bug #935, and probably also bug #903 where files were not
791 restored. MediaId was not properly set in JobMedia record after
794 kes Suppress chown and chmod error messages if the FD is not running
797 kes Apply Martin Simmons' patch that should turn off the new API usage
798 when batch insert is turned off allowing building on older
800 kes Add ./configure search in qwt-qt4 for qwt package
802 kes Bacula is now free of 3rd party GPL copyrighted code!
804 kes Add guid_to_name.c/h which replace idcache.
805 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
807 ebl Detect if new PosgreSQL batch insert API is present.
808 kes Correct incorrect mempool call causing Director crash. Occurs on
809 systems without va_copy().
810 sb Update spec files for 2.2.1 release
812 kes Fix memory pool call in ua_output.c. bug #934.
813 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
814 Add test program to fnmatch.c
816 kes Integrate patch to README.vc8 from
817 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
818 edit it to get it into Unix patch format.
819 kes Implement mkpath.c to replace old FSF makepath.c
821 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
823 Release Version 2.2.1
825 kes Update POTFILES.in
826 kes Cleanup a few underquoted AC_DEFUNs in configure
827 kes Apply patch from Martin Simmons that adds a test for va_copy to
830 kes Fix bug #921 by increasing the number of tries to create a new volume
832 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
833 can be called multiple times. Implement a version for machines
834 without va_copy() that gets a big buffer.
836 kes Integrate more portable zone offset code into bsmtp.c
837 Submitted by Attila Fülöp.
839 kes Fix bad SD->FD return status reported by
840 (James Harper) <james.harper@bendigoit.com.au>
841 ebl Fix a bug in read_close_session which return random status
842 thanks to James Harper
844 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
845 and directory names during restore of single file/directories.
846 kes Add sanity checks to .sql command when string is empty. Hopefully
847 that will resolve Dirks Director crash.
849 kes Apply patch submitted by Martin Simmons that corrects a seg fault
850 in the bsmtp chat subroutine when debug is >= 10.
852 kes Fix Director crash when running bat SQL queries.
853 kes Add David's notes on Item 8: Copy pools.
855 kes Rework projects file to be current and ready for a vote.
856 kes Enhance lex scanner error message.
858 kes Tweak LICENSE file to mention BSD code.
859 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
860 if specified on the ./configure.
861 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
862 This class is intended to allow us to open a second bsock to the
863 Director while in the restore subdialog.
865 kes Fix configure to create bat Makefile before creating dependencies.
866 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
867 kes Add a tooltip to the tray monitor.
868 dvl Set the Director's PID file before dropping privs. This fixes
871 kes Update AUTHORs file
872 kes Increase the default max concurrent jobs to 20 in FD and SD to
873 correspond with the default .conf files.
874 kes Rewrite the Win32 service routines. This eliminates the 3 copies
875 some different, of the same file created by RN when porting the
877 kes Rearrange some of the Win32 directories and the placement of the files
879 kes Set DEVELOPER flag in version.h
881 ========================================================================
882 Release Version 2.2.0
884 kes Apply a second doc patch from Marc.
885 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
886 improves the tips section that discusses how to setup multiple
889 kes Update bat README file.
890 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
891 corrects a typo in the Recycle status check in db_find_next_volume().
892 This will probably fix a number of annoying problems with multiple
894 kes Modify most of dird/msgchan.c to use bsock class calls rather than
895 bnet calls -- no functionality change.
897 kes Modify the Verify output to specify if files are missing on
898 the Volume(s) or disk. Fixes confusion in bug #916.
899 kes When more than one Volume is read in a migration job, the last
900 Volume bytes reported are from the last read volume rather than
901 the last written volume. Fixed. This fixes bug #910.
902 kes Fix display of Recycle flag after update volume=foo recycle=yes.
903 It previously printed New Recyle flag is: no. This fixes bug
906 kes Correct seg fault when switching tape drives during restore.
907 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
908 be used until after 2.2.0 release.
910 kes Remove fnmatch() in SD that permitted wild card specifications.
913 kes Fix %g in filename returned by SQL for browse tree reported by
915 kes Fix configure so that it puts config.out in the cwd rather than
917 kes Attempt to fix the locking problem reported by Eric in bug #906.
918 kes Make berrno class to leave errno unchanged after constructor call.
919 kes Make bnet_server use the heap rather than the stack to allocate
920 its socket fd pointers to avoid a crash at termination. Problem
921 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
923 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
924 and putting it in depkgs-qt along with Qt4.3.
926 kes Rework code in acquire.c that switches drives for reading when
927 the Media Type does not match. This should fix bug #906
929 ebl Fix a director segfault during job setup #907
930 kes Correct seg fault in postgresql when first operation returns no
931 rows. Fixes Dirks File browser problem seg fault with bat.
933 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
934 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
937 kes Implement PopUp YES/NO dialog for bat.
939 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
941 kes Correct RunScript to terminate job in FD on failure.
942 kes Change abort_on_error and AbortJobOnError to fail_on_error
943 and FailJobOnError in RunScripts.
944 kes Minor tweaks of code formating in RunScripts, principally to
945 avoid depassing 80 columns.
947 kes Eliminate one #ifdef Win32 in bsmtp
948 kes Implement grow tool to grow a file for testing very large databases.
949 kes Add big-vol-test to test Bacula seeking with > 5GB.
952 kes Modify find_next_volume() to return all values in Media record.
953 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
957 kes Update Release notes
959 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
960 Warning, in previous beta version, all media get from scratch keep their
963 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
964 This should fix bug #842. Made a note to look at removing the temp
965 files at the end of the install.
966 kes Add ability to mount and unmount a file device providing it is
967 marked as being removable and has the appropriate mount and unmount
968 commands defined in the Device resource. This fixes bug #830.
969 kes When applying a storage override, release all previous storage
970 definitions rather than just prepending the new storage.
971 This should prevent a good deal of confusion.
973 kes Implement ./configure search for qwt libraries.
975 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
976 Win32 FD. This should fix bug #893.
977 kes Remove an unnecessary beep in Win32 init code.
978 kes Update copyright dates in Win32 executable about boxes.
979 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
980 code with a BSD getopt.c and getopt.h.
981 kes Remove sched.h from the Win32 compat directory -- not used.
982 kes Remove the Exit menu item from the Win32 tray monitor. If you really
983 need to shut it down, do it through the services panel or the command
985 kes Remove some inappropriate Bacula FSFE copyrights.
986 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
987 kes Fix regress config non-portable test as pointed out by
988 Florian Heigl <florian.heigl@gmail.com>
989 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
990 as pointed out by Florian Heigl <florian.heigl@gmail.com>
992 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
993 Reported by Frank Sweetser.
997 kes Fix client-only build.
998 kes Integrate client-only fixes for bsys (initgroups) and conio from
999 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1000 kes Make arguments to get_scratch_volume() in same order as other
1002 kes Rework the prune_volumes() subroutine so that after purging and
1003 no volume found in desired pool, it will check for a scratch
1004 volume. This prevents recycling the whole scratch pool.
1005 kes Add code to status storage to print boffset_t (largefile support).
1007 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1008 kes You now need a --with-qwt=<dir> to be able to build bat.
1009 kes Update src/win32/cats/bacula_cats.def to include the new
1010 db_get_query_dbids() call on Win32.
1012 kes Correct a problem when selecting a scratch volume and moving
1013 it to another pool that lost some columns.
1014 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1015 kes Enhance Autochanger error messages to include Volume and device name.
1016 kes Rework prune_volumes() code to take account of InChanger flag,
1017 and to handle recycling volumes going to the Scratch pool and
1018 current pool because the RecyclePool directive.
1019 kes Implement a better and more efficient db_get_query_dbids() to
1020 handle creating and passing back a list of DBIds.
1024 kes Start work on new more efficient DBId subroutine. First use
1025 will be for recycling volume to Scratch inchanger.
1026 kes Increase number of JobIds in pruning from 1000 to 10000.
1027 This to be replaced by above routine.
1028 kes Begin implementation of building Qt4 on Win32.
1029 kes Correct typo in fix I added for bad TLS shutdown.
1030 kes Pull 2.0.3 patches into patches directory.
1031 kes Update Release notes. Include qt-console in line count.
1032 kes Update Projects file.
1034 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1035 bug in migration code where a job that spanned two volumes
1038 kes Implement new BST_DESPOOLING blocked state. Change from locking
1039 during despooling in SD to blocking. This means that other threads
1040 can work with the device structure, in particular the reservations
1041 system while despooling.
1043 kes Fix return in reservation message queue that missed clearing
1044 the jcr lock (implemented 26Jun07 below).
1045 kes Rename a number of dev methods to make locking function names
1047 kes Document locking in lock.c. Move lock structures to new file
1050 kes Move reservations message lock to lock jcr only this
1052 kes Move main SD locking code into lock.c (new file).
1053 kes Update Win32 build to include lock.c
1057 kes Dirk committed the qwt library code for drawing graphs in bat.
1058 kes Tweak install of qwt so that it is integrated with ./configure.
1060 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1061 out by Eric (my typo).
1062 ebl Fix configure.in to get batch mode enable
1063 kes Return correct string from authenticate.cpp in bat when connecting
1065 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1066 spurious line drops when using TLS.
1067 kes Do not file reparse points when restoring a file that already
1070 kes Implement Windows reparse points -- similar to directories, but
1071 we do not descend into it. This is a first cut. They seem to
1072 be backed up, but restore is not yet tested.
1073 kes Remove restore_blocking in tls code when shutting a socket to leave
1074 it in blocking mode. Hopefully this will fix the encryption bug
1075 reported by Frank Sweetser.
1076 kes When opening a file for backup, tell the OS that we are going to
1077 read it sequentially -- optimization.
1078 kes Change variable names in authenticate_director() to not conflict
1079 with member names in bat. Caused great confusion with compiler,
1082 kes Queue openssl error messages in case of comm problem.
1083 kes Do shutdown() call if socket terminated.
1084 kes Remove some duplicated code in tls.c
1085 kes Move more of the bsock member variables into private and access
1087 kes Add Frank Sweetser's tls-test to the regression suite.
1089 kes Add Swedish sv.po file
1091 kes Don't print clock skew message in FD if less than 3 seconds diff.
1092 kes Add a bit of VSS info to status client.
1093 kes Implement a first cut of Vista VSS, using Win2003 code.
1095 Release: 2.1.20 beta
1097 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1098 loaded tape but uses first drive).
1099 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1100 This was indeed a Win32 issue.
1102 kes Simplify search of autochanger for in-use Volume.
1103 kes Fix exit condition of check for in-use volume. kes Remove
1104 inappropriate my_postgresql_free_result() in db_close()
1106 kes Fix bad return in FD when encryption signature not found.
1107 Probably caused a crash.
1108 kes Inhibit missing encryption signature error messages for
1109 file types where no signature computed.
1110 kes Correct inverted check on autochanger in reservation system.
1111 kes Tweak debug code in autochanger reservation.
1113 kes Add some additional locking in the cats directory in subroutines
1114 that modify packet variables called from batch insert.
1115 kes Rework how dcrs are allocated. new_dcr() can now be called
1116 with an existing pointer, and it will simply clean it up.
1117 This allows the reservation system to test various different
1118 devices, and will permit easy device changes.
1119 kes A bunch of changes all over to handle new new_dcr() calling
1121 kes Work more on the Volume management in the SD. Remember Volumes
1122 for tape drives and for autochangers (even virtual disk changers).
1123 kes When looking at the Volume list to reserve a drive, handle
1124 autochanger names correctly by interating through the changer
1125 devices. Also call the Director to see if a Volume is suitable
1126 for the current job.
1127 kes Fix some bugs in bscan. Make sure all media records are written.
1128 Make sure that valid JobMedia records are written for disk files.
1129 Previously they were completely wrong.
1130 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1131 that the URLs don't change and so that the developers will all
1132 work off the same copy. Rebuild from scrach.
1133 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1135 Release: 2.1.18 beta
1137 kes Fix seg fault in FD from incorrect digest size.
1138 kes Fix argument to non-OpenSSL crypto.c subroutine.
1140 Release: 2.1.16 beta
1142 kes Remove a few malloc()s from the encryption code.
1143 kes Use the class calls to bsock in filed/backup.c and restore.c in
1144 place of the old bnet_xxx code.
1145 kes Implement code that does an on the fly calculation of the
1146 signing digest during restore of encrypted files. It makes
1147 a best guess at the algorithm, and if it is not correct, will
1148 then revert to the old code which reads the file after it is
1150 kes Implement at least one missing crypto stream in stream_to_ascii()
1151 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1152 #877 where a reload with bad syntax causes Dir to exit.
1154 Cut: 2.1.14 beta (not released)
1156 kes Do not free a volume on a tape drive until another volume is
1157 mounted and read, or the autochanger unloads the volume.
1158 This should help the SD re-use volumes that are already mounted,
1159 and should fix bug #886.
1160 kes Apply patch from user brettedgar that allows gnome2-console include
1161 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1162 kes Apply patch from Lucien Weller that fixes day of week calculation
1163 because of DST flag problem. Fixes bug #887.
1165 kes Move find_next_appendable_volume() to after acquiring a valid device
1166 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1168 kes Unable to reproduce bug 872. However added additional testing for
1170 kes Bug #874 resolved by documenting SQLite limitations.
1171 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1172 kes Bug #881 resolved by removing typo in mtx-changer script.
1173 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1174 approval. Added a link to the wiki on the web page, and implemented
1175 a backup from http://paramount.ind.wpi.edu
1177 kes Fix update allfrompool to pass pool name.
1179 kes Convert to pure GPL v2 license.
1180 kes Fix sscanf problems reported by Peter Buschman that caused
1181 a bus error on Solaris.
1182 kes Rework (simplify) the select prompt in bat.
1183 kes Move get_jobid_from_tid() into lib and create a
1185 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1186 should definitely fix the problem of lost error messages in the
1188 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1189 kes Eliminate tcpd.h from the project. Enclose the #include from the
1190 library with extern C ...
1191 kes Add print of signal name when a signal is trapped.
1193 Release: 2.1.12 beta
1195 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1197 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1198 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1199 makes SQLit3 run 30 times faster, though a bit less safe.
1200 kes Implement --with-batch-insert in configure and detection of thread
1201 safe libraries. It is on by default, but turned off if no thread
1202 safe library (e.g. SQLite 2) is available.
1204 kes Fix Bacula PostgreSQL buffer overruns.
1205 kes Do better checking for NULL results returned from PostgreSQL;
1206 implement retry for failed queries; clear results buffer after
1207 failed query. Hopefully this will correct the PostgreSQL failures.
1209 kes Implement algorithm to handle only one appendable volume with
1210 Prefer Mounted Volumes = no.
1211 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1212 returned from a query.
1213 kes Make volume lock recursive.
1214 kes Implement an additional volume reservation algorithm that
1215 starts by considering all reserved volumes then uses the
1216 old brute force algorithm of searching the resources to
1217 find a suitable device.
1218 kes Add new reservations debug code and refine the old code.
1219 kes Update the win32/dll/bacula.defs file.
1221 kes Tweak reservations algorithm to permit a few more cases, i.e.
1222 volume reserved, but on different drive, ...
1223 kes Enhance SD status to include Pool and Media Type for drive in a
1224 more readable format (a bit longer).
1225 kes Fix PostgreSQL double free.
1227 kes Minor refactoring of restore decryption code.
1228 kes Add code to smartall.c to detect double free of a buffer.
1230 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1231 so that bsmtp will create a correct email address (mailbox only).
1232 kes Modify 'memory' command so that the buffers are listed as 'In use'
1233 to avoid confusion with Orphaned buffers.
1234 kes I reworked the OpenSSL include/lib flags to be handled in
1235 the standard Bacula way, which should fix bug #863 concerning
1236 non-standard OpenSSL libraries.
1238 kes Implement Help Browser window for bat.
1239 kes Fix reload bug that reset StorageId to zero.
1241 kes Fix TLS #ifdefing when TLS turned off.
1242 kes Ensure that when labelling a tape with Slot=0 that InChanger
1244 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1246 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1247 add DISTINCT (required by PostgreSQL).
1248 kes Implement BSOCK authenticate_director() method. Eventually will
1249 authenicate all daemons.
1250 kes Move several more functions into the BSOCK class.
1252 kes Add code to tell the OS that we no longer need a cached
1253 file that we were reading. In findlib/bfile.c. Also,
1254 only cache files that we are reading. Thanks to
1255 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1256 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1257 kes Implement script to automatically generate cats and dll .def
1258 files for Win32 dll.
1259 kes Update README.mingw32 to include new .def file generation.
1260 kes Correct typo in UTF-8 error message as reported by:
1261 jhernandez <julianhernandez@gmail.com>
1262 kes Add additional sm_check() code on debug level 1.
1263 kes Set default debug level to 1.
1264 kes Trap SIGABRT in attempt to get traceback.
1266 kes Reduce bat connect timeout from 30 to 15 seconds.
1267 kes More restructuring and implementing BSOCK class in place of
1269 kes Remove a few unnecessary malloc() tests in crypto code.
1270 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1271 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1272 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1274 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1276 kes Fix Verify InitCatalog. The attributes were not pointing to the
1277 correct saved location.
1278 kes Implement message callback so that GUI is sure to get all
1279 daemon messages. Currently displayed in a dialog in bat.
1280 kes Ignore SIGUSR2 (Bacula timer) in bat.
1281 kes Apply regress patch from bug #859 to allow regress to work
1282 with Solaris compiler.
1284 kes Begin adding TLS support to bat.
1285 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1286 clean up lex.c and make it more readable.
1288 kes Move more bnet functions into the BSOCK class.
1289 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1290 kes Complete change of berrno strerror() method to bstrerror()
1292 Release: 2.1.10 beta
1294 kes Cleanup incorrect email addresses in bsmtp.
1295 kes Make bat display initial messages rather than discard them.
1297 kes First cut of adding .mod to the run command.
1298 kes Implement auto display of messages in bat.
1299 kes Enhanced preferences to allow all Bacula output to be
1302 kes Try to make bsmtp date routines more generic.
1303 kes Fixed bug #856 autochanger documentation.
1304 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1305 kes Add new cats entry point so Win32 builds.
1307 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1309 kes Do better checking for the MySQL 64 bit libraries looking for both
1310 .a and .so libraries.
1311 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1312 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1313 kes Require the thread safe version of MySQL during configure. Thanks
1314 to Andre Noll for pointing this out.
1315 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1316 continuing in migration code.
1317 kes Apply implementation of tray-monitor font derived from gnome-console
1318 submitted by Andreas Piesk <a.piesk@gmx.net>
1320 kes Eliminate important memory loss in SQLite
1321 kes Fixed the batch insert MySQL thread specific data that was not
1322 being freed. See cats/mysql.c:db_thread_cleanup().
1323 kes Fix restore before command.
1324 kes Convert old hdr.name to name() in a few places.
1325 kes Implement update jobid command.
1326 kes Return all time_t dates in db_get_job_record()
1327 kes Stop watchdog in SD earlier.
1328 kes Put Pool just after Storage in please mount message.
1329 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1332 kes Update the po files.
1333 kes Fix Verify InitCatalog by making it cache attributes.
1335 kes Change name bacula-bat to bat for man 1 page to correspond to
1337 kes Check for client and store NULL pointers in status command. This
1339 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1340 kes Fix sign extended editing of %p.
1341 kes Clean out a little old #ifdefing in cats/mysql.c
1343 kes If time diff between DIR and FD is more than 600 seconds convert
1344 INFO message to WARNING.
1345 kes Implement heap size display in status for all daemons.
1346 kes Attempt to fix MySQL db open memory loss (not successfull).
1347 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1348 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1349 Query. This looks like a MySQL but but by doing extra releases,
1350 the memory goes away. This should fix bug #847.
1352 kes When backup fails, cancel SD before waiting for sd termination.
1353 kes If SD is waiting for FD to connect during cancel, wake up the
1355 kes Fix fsf code so that errno is correctly reported.
1356 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1358 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1359 so that Bacula doesn't later stumble into a seg fault.
1360 kes Use the term Restore Client in the restore Job report.
1361 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1362 the original job's FileSetId.
1363 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1364 spooling in migration jobs. Not yet tested.
1365 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1366 reading conf file from a pipe. However, do it with open_bpipe()
1367 rather than popen. Not yet tested.
1369 kes Fix an ugly bug where the VolCatBytes were getting updated
1371 kes Implement bconsole memory command that prints current memory
1372 usage, plus smartalloc dump.
1373 kes Clarify some error messages in backup, admin, and migrate.
1374 kes Shrink label dialog to smaller size.
1375 kes Invert Cancel OK buttons on restore to be OK Cancel.
1376 kes More strerror() to bstrerror() conversions.
1378 kes Start implementing bstrerror() in place of strerror().
1379 kes Stripping path -- seems to work.
1381 kes Prevent door and port files from being restored (mostly
1383 kes Free an unreleased buffer in compat code.
1384 kes Change console Job name from *Console* to -Console- to eliminate
1385 Win32 filename problems. Put Win32 path separator when creating
1386 Console file. This fixes bug #846.
1387 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1389 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1391 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1392 to force Win32 error message.
1394 kes First cut strip path. The data should be passed to the FD,
1395 but nothing is done with it yet.
1396 kes Enhance the digest and signature routines in the crypto
1397 library to accept a JCR and to use it to print error messages
1398 so that they will go in the Job report rather than the daemon's
1400 kes Simplify some of the verify signature code.
1401 kes Simplify a few of the alternative returns in the signature
1404 ebl Use only POSIX regex instead of GNU regex in breg.c for
1405 File relocation. It fix broken freebsd compilation.
1406 kes Convert all other Dir files to use new ua class message
1408 kes Tentative fix for missing digest signature in bug 807.
1409 kes Correct handle problem in new win32_ftruncate routine.
1410 kes Convert ua_purge.c and ua_update.c to use new ua class
1411 message routines for bat.
1413 kes Correct incorrect installation of LICENSE in Win32 installer.
1414 kes Display LICENSE at the beginning of the Win32 install.
1415 kes Attempt to correct the need for the png files to be installed
1417 kes Reapply my bat.conf install script in qt-console. I think I
1418 editted bat.pro instead of bat.pro.in and it was lost.
1419 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1420 the /var/lock/subsys for subsysdir. Also corrects typos in the
1423 kes First cut update job.
1424 kes Correct configure to include qmake of src/qt-console directory.
1426 kes Make restore job yes/mod/no print in one command so GUI works.
1427 kes First cut implementing backup and restore client.
1428 kes Correct editing in Verify output that caused a seg fault.
1430 kes Insure that bat.conf is not overwritten during installation.
1431 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1432 while I was implementing migration in March 2006 !
1434 ebl Cleanup file relocation, using char *RegexWhere instead of
1435 char *where + bool where_use_regexp
1436 kes Update some manpages and add bat manpage.
1437 kes Make a first cut at converting bacula.spec.in for bwx-console
1439 kes Apply patch from John Goerzen to add hostname as fourth argument
1440 to make_catalog_backup script.
1441 kes Fix typos I introduced into bsmtp.c
1442 kes Make pm_strxxx() routines handle input of NULL pointer. This
1443 is to protect from NULL pointers returned from SQL databases.
1444 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1445 kes Add more debug to FIFO code -- fix fifo regression test.
1447 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1448 kes Add thread timer to bnet_connect() to break from OS if wait time
1451 kes Update Win32 build to include new files, new symbols, and
1453 kes Implement socket level heartbeat (tcp_keepidle)
1454 ebl Commit File relocation patch
1455 kes Make bat have 'make install' target.
1456 kes Warn during install if old gnome-console binary found.
1457 kes Warn during install if old wx-console binary found.
1458 kes Add -8 option to bsmtp command line to add content type utf-8.
1459 Fixes bug #809. (Character coding problem in bsmtp).
1460 kes If < is found in target (from, to, cc) then do not enclose the
1461 target in < > in bsmtp. Fixes bug #772 (malformed address).
1462 kes When printing certain items in dbcheck, stop after 300000.
1463 Fixes bug #822. (dbcheck loops).
1464 kes Incorrect status in Dir after waiting for mount with poll set.
1467 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1469 kes Print waiting to reserve a device every 5 mins.
1471 kes Don't call close_part in label.c if tape and relabel.
1472 kes Don't free volume if busy in close() -- should help with
1474 ebl Fix #824 RunScript bug (After script could be execute twice)
1475 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1476 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1477 Add a regression script to test RunScript
1479 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1482 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1483 deprecated. No additional bugs will be fixed, and they will be dropped
1484 in a future release (probably 2.4.0).
1485 kes Change name of wx-console to bwx-console to make it more Bacula
1487 kes Change the name of gnome-console to bgnome-console to make it
1490 kes Some time in March, a Feature Request with patch from Jorj Bauer
1491 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1493 The ability for the director to validate a Client (FD) CN against
1494 an arbitrary set of patterns rather than the hostname, with
1495 A new 'TLS Allowed CN' set of directives which are implemented
1496 in the Client resource. Then pattern matching is used in place
1497 of hostname matching against the Certificate's CN. As an example, we
1498 have certificates which (a) use a local CA, and (b) have a CN of the
1500 kes Add new/changed entry points to Win32 build
1501 kes Create unaccepted-projects for projects that are not accepted.
1502 kes Simplify locking in the reservations system.
1503 kes Add more debug code in reservations.
1504 kes Make sure error condition on reserving a volume is handled correctly.
1505 kes Correct handling of volume_in_use.
1506 kes Correct handling of initializing a device.
1507 kes Move handling of broadcasting releasing a device into release_device().
1508 kes Correct attaching dcr to dev so that it is only done if device
1509 is properly initiated.
1511 kes Locking debug level tweaks in SD.
1512 kes Tweak new Volume code.
1514 kes Add exec external-command [wait-seconds] to bconsole. This
1515 executes the external-command. Note! normally external-command
1516 should be enclosed in double quotes.
1517 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1518 it should normally be off in a production system.
1520 kes Implement die command for SD so that we can force it to dump.
1521 kes Implement SD lock debug code.
1522 kes Implement new algorithm for keeping Volume list in SD. It
1523 is now owned by the device.
1525 kes Implement new code for freeing in use volumes that should
1526 resolve if not all, some of the problems of multiple drive
1527 tape conflicts described in bug 801.
1529 kes Fix gui/bacula-web/images files in svn.
1530 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1532 ebl Fix a bug in batch mode (in string escape)
1533 kes Correct migration prune SQL typo that crept in in a
1534 recent 2.1.x change.
1536 kes Move bnet_despool() into class in bsock.c
1537 kes Modify job report to include director name and Build OS.
1538 kes Move drop root privilege and check_catalog() before fork.
1539 kes Add update database scripts (version 9 to 10) to updatedb directory.
1541 ebl Check size and age of each file after its backup to see if
1542 it has changed during backup, if 'checkfilechanges' is set.
1543 The FD will do an extra check (stat(2)) after
1544 each file backup. mtime, ctime and size are compared with
1545 'before backup' information. If time or size mismatch, an
1546 error message will be generated. You must upgrade FD to use it.
1548 kes Make database name and user configurable
1549 --with-db-name=xxx --with-db-user=xxx
1550 kes Add back database type to message.c for debugging.
1552 kes Implement dir_sql() which issues an SQL query.
1553 kes Modify bat medialist to use dir_sql() and do some minor C++
1554 formatting as well as eliminating a number of pointers, simplifing
1557 kes Fix some of the mtx-changer grep commands for tape label readers.
1558 kes Convert a number of bsendmsg into the appropriate send/warning/error
1559 message class calls.
1560 kes Suppress the using database message in the .sql command.
1561 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1563 kes Add context menu for floating a window.
1564 kes Some minor cleanup and name changes in qt-console
1565 kes Add doing mt setblk 0 in Win32 mtx-changer.
1566 kes Apply Martin's bug fix to move definition of ENODATA for
1568 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1569 sqlite2 and sqlite3.
1571 kes More pruning cleanup.
1572 kes Turn on wait_for_drive by default in mtx-changer.
1573 kes Turn on Batch insert code by default as it now passes regression.
1574 kes Add ./configure --enable-bat to enable building of Bat.
1575 No install yet though.
1577 kes Implement a new .sql command for bat.
1578 kes Implement code to turn off pruning in obtaining the next volume.
1579 Pruning is turned off for the status dir command, but turned on
1580 for SD requests and for the list nextvolume command.
1582 kes Correct Qmsg() that was not updated correctly when committing a
1583 previous change (probably the recent TLS patch).
1585 kes Write new subroutine is_volume_purged() that explicitly checks
1586 if the Volume is purged, and if so marks it as such. This should
1587 resolve problems reported about needing to mount twice to recycle
1589 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1590 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1591 amount of duplicated code.
1592 kes Do volume pruning only for the Media Type desired (reduces pruning time
1593 if multiple Media Types are in the same pool).
1594 kes Implement more detailed info in the Job report for the Bacula version
1596 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1598 ebl Add bbatch tool to bench database and insert mode.
1599 Fix sql quote stuff in batch mode
1600 Fix sql stuff for mysql
1602 kes Correct problems with am/pm scheduling. Fixes bug #808.
1603 kes Implement new prunning code that prunes up to 1000 jobs at
1604 the same time. The same technique can be applied to a number
1605 of other prune/purge subroutines.
1606 kes Add an insanity check when starting a new tape job to ensure
1607 that the tape position has not been changed. If so fail the
1609 kes Fix Win32 build for dlls to add the folllowing:
1610 src/lib/bsock.c -- new file with new entry points
1611 src/lib/dlist.c -- new entry points
1612 src/cats/sql_create.c -- new entry point
1613 src/cats/sql_cmds.c -- new DATA item exported
1615 ebl batch mode cleanup bscan-test is ok now.
1616 kes Implement SD code to check length of disk volume before appending.
1618 kes Correct return status on db_batch... routines.
1619 kes Add call to db_write_batch_file_records() to migration code.
1620 ebl Fix AfterJob timing
1621 kes Move the checking of the database in initializion of the Director
1622 to after we drop privileges. This avoids the need for both root
1623 and bacula access to the DB.
1624 kes Correct a misplaced variable definition in src/filed/backup.c
1625 kes Correct how the new batch insert db_create_attributes_record()
1626 uses the arguments. Caused a seg fault in bscan.
1627 kes Implement lock() and unlock() methods in DEVICE class.
1628 Implement block() and set_block(xx) methods in DEVICE class.
1629 kes Modify bnet_connect() so that it uses time() to check for the
1630 wait time expiring (on some OSes, some system calls may not
1631 return immediately).
1632 kes Modify Verify to obtain the previous JobId when it is actually
1633 running rather than at schedule time (as it was in 1.38.x).
1634 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1636 kes When checking pid in pid file, continue running if the pid is
1637 the same as ours. This occurs on IRIX after a system crash.
1640 kes Extend new GUI API.
1641 kes Make the ua structure a class, and implement send_msg(),
1642 error_msg(), warning_msg(), and info_msg().
1644 kes Apply fix from for building wx-console on the Mac from
1646 kes Implement new select mechanism for GUI programs.
1647 kes Reorganize initialization of stackedWidgets in bat.
1649 kes Add updated nagios plugin supplied by Christian Masopust.
1651 kes More bat implementation.
1652 kes File migrate bug with Pool Occupancy using mediaid instead
1653 of jobids. Fixes bug #795.
1654 kes Fix orphaned buffers in filed backup and verify due to
1655 crypto buffers not freed during errors. Fixes bug #789.
1656 kes Extend new GUI api code to tree commands.
1657 kes Ensure that tree and dot commands check console ACLs.
1658 kes Permit marking directory with trailing slash.
1659 kes Allow 20 console connections (instead of only 10).
1661 kes Add smartctl call to bacula-sd.conf as an example of getting
1664 kes Modify jobq.c to let simultaneous restore jobs run. This may
1665 cause them to fail if they cannot get a drive.
1666 kes Add Client Connect Wait to Storage daemon to permit users to
1667 modify the time the SD waits for a FD connection.
1669 kes Correct virtual changer check which was backwards. This caused
1670 volumes to be unloaded into slots already occupied.
1672 kes Apply Command ACL filter to JobId list in restore command.
1673 kes Correct typeo in var.c patch.
1675 kes Don't let Bacula prune File or Job records for the current Job.
1676 kes Fix variable substitution pad + inc bug reported (with patch)
1679 kes Correct SQLite log table index as reported by Luca Berra.
1681 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1683 kes Begin implementing new comm signals for API.
1684 kes Fix a few places in lib/message.c where the open fd may
1686 kes Continue implementing lib/bsock.c (real class). Make jcr,
1687 who, host, and port private. There are new methods to access
1688 them for non-class use. This required touching a number of files.
1690 kes Add LANG=C to autoconf/randpass so it works with languages other
1691 than English. Fixes bug #788.
1693 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1695 You will not be able to generate Include/Exclude list any more.
1696 It will be fixed soon.
1697 If you want to use this, you can apply
1698 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1700 kes Restore of sockets created false error messages because Bacula
1701 no longer restores sockets, but the code was still trying to
1702 set the attributes on a non-existent file. Reported by a user.
1703 ebl finish RecyclePool feature
1704 Media will takes Pool.RecyclePool
1705 when moving from Scratch to a Pool or when user will do
1706 update volume=xxx frompool
1707 To use it, add RecyclePool = aPool to your Pool resource
1710 RecyclePool = Scratch
1714 kes Expand new BSOCK class adding signal() and new BNET signals.
1715 kes Begin enhancing the dot commands adding a new API function
1716 that returns more information and will make it easier
1717 to interface to the Director from a program.
1719 kes Make DEVICE fd private. Its new name is m_fd, and can be
1720 obtained with dev->fd() outside the class. This is the
1721 first of many DEVICE members to be made private.
1722 kes Implement Michael Renner's idea on having a virtual disk
1723 changer. I made some minor modifications (e.g. I did not
1724 implement the Virtual Changer directive, but simply set
1725 the Changer Command to an empty string.
1727 kes Implement a BSOCK send() method that writes the whole record
1728 in a single write() request rather than in two.
1729 ebl add update volume=xxx recyclepool=yyyy
1730 volume takes recyclepool from pool when using update volume=xxx from pool
1732 kes Fix encryption deblocking bug, which caused some restored files
1733 to be truncated. This fixes bug #763.
1734 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1735 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1737 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1738 ebl Use btime_t instead of uint64_t in media patch.
1740 kes Optimize the use of the database a bit in the Status dir command.
1741 Only open it when needed, ensure that if any previous database
1742 was opened, it is closed.
1744 kes Correct VolCatBytes bug from media patch.
1745 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1746 in the case of orphaned records.
1747 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1748 and File records in 300K chunks to be more efficient. This
1749 idea came from Juan Luis Frances (if I remember right).
1750 kes Apply Eric's scratch patch that moves a purged Volume to
1751 the RecyclePool. Question: how is RecyclePool set? what
1752 happens to the ScratchPool?
1753 kes Apply Eric's media patch that collects read/write media
1754 times as well as byte counts. This patch requires a
1755 simultaneous upgrade of the DIR and SD. Note, there
1756 should be some way to turn off timing. I'm not sure
1757 times are in Bacula units.
1758 kes Apply Eric's batch-insert patch.
1760 kes Update projects list.
1762 kes Implement Include/Exclude file lists in FD as dlists using
1763 the new dlistString class. This permits efficiently having
1764 large include/exclude lists and completes project Item 25.
1765 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1766 console is authorized to cancel the job. This fixes bug
1768 kes Modify SD so that the VolCatJobs medium record is updated
1769 at the beginning of a Job rather than the end. This
1770 fixes bug #775 where exceeding MaxVolJobs caused jobs
1772 kes Added a mutex around getting and setting Volume information
1773 so that multiple simultaneous jobs will single thread.
1775 Switch to using Subversion
1776 kes Remove src/pygtk-console/ from configure
1778 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1779 plus the entrypoints.
1780 kes Apply patch supplied that corrects debug print
1781 in canceling jobs for max run time. Supplied as
1782 part of bug #621, which was previously fixed.
1784 kes Test on job_canceled() and sd_msg_thread_done inside
1785 loop starting the message thread to avoid a race condition.
1787 kes Remove rl_catch_signal from console.c as it conflicted
1788 with the header definition. Fixes bug #765.
1789 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1791 kes Clarify some stored/acquire messages to indicate if the
1792 problem is with read or append.
1794 kes Fix memory leak with storage ids in cats/sql_get.c
1795 kes Terminate watchdog earlier to avoid reference to released
1796 memory -- reported by Jason Austin.
1797 kes Move closing the database from jobq.c to the director daemon
1798 termination routine. This fixes memory leaks for shadow jobs
1799 (i.e. migration jobs).
1800 kes Free up the unique jobid chain items in migrate.c. This fixes
1801 a memory leak problem.
1802 kes Convert some ugly looking for statements to use foreach_alist
1803 in findlib/find.c. This will facilitate converting the structures
1804 to use dlist (for large include/exclude lists).
1805 kes Fix a bug in the btree.c and btree.h routines, then rename them
1806 rblist and add them to be built in src/lib. Include some new
1807 methods written by Rudolf Cejka that make the code more readable
1808 (hides some of the ugly casting).
1809 kes Add set_next() and set_prev() methods which make the code much more
1810 readable. Also add a new dlistString class that facilitates storing
1811 strings in dlists. To be used in the large include/exclude lists.
1812 kes Make some trivial modifications to lib/tree.h that use rblist
1813 rather than dlist for storing the tree links. This was suggested
1814 by Rudolf Cejka. The result of this is that the restore tree now
1815 uses red-black binary trees rather than simple linked lists. This
1816 should give rather dramatic speed improvements for directories
1817 contining large numbers of directories/files (more than 10000).
1819 kes Fix maxruntime bug #621.
1821 ebl Implement the include JobID in spool file name project.
1822 kes Reorder projects file in order determined by Jan 2007 vote.
1823 kes Implement item #12 on project list -- quick release of FD by
1825 kes Fix open of SQLite3 db where user does not have write permission
1826 so that DIR does not crash. Fixes bug #761.
1828 kes Add back missing @ in Win32 Makefile.
1829 kes Change 'Device not configured to autolabel' from INFO
1831 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1832 which should restart an indefinite # of times.
1833 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1834 other DIR specifications.
1836 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1837 Fix path quoting in SQLite scripts.
1838 Fix problems with SHGetFolderPath.
1840 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1842 kes Fix Job restart on error bug that promotes an Inc to a Full
1843 backup. This should fix bug #755.
1844 kes Add qt-console and first cut of code.
1848 kes Fix Bacula->Documentation link on Win32 to point to index.html
1849 instead of bacula.html. Fixed bug #750.
1850 kes Return JobId in db_get_job_record() when JobId==0. This should
1852 kes Do not release source pointers when restarting a failed job.
1854 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1855 This *should* fix bug #747.
1856 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1859 kes Modify USTORE constructor to set an empty store_source string,
1860 and don't copy the store_source string in a cancel. Hopefully
1861 this will fix Arno's seg fault, bug #744.
1862 kes Add back code to disable conio in configure. Fixes bug #743.
1863 kes Correct the Options scanner in the FD to correctly handle
1864 SHA1 option, which was eating the next option. Reported by
1866 kes Add code to indicate when the SD is spooling, spool wait, and
1867 despooling as requested by Alan Brown.
1869 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob